1
Prices excluding VAT valid from 01 February 2014
Price list 2014
Contents
▪ CHEMICAL FIXINGSResin, resin anchors, resin capsules, guns & accessories
11
▪ STEEL ANCHORS Anchors, setting tools, wrenches, concrete screws, drop-in anchors & accessories
25
▪ FRAME FIXINGSPlugs & screws, wall ties, hammerfixings, window /door frame fixings & screws
42
▪ GENERAL FIXINGS Wallplugs, fixing sets, expansion units, brass anchors & Wet N Fix hole repair kit
51
▪ AIRCRETE FIXINGS Fixings & accessories for aircrete only
54
▪ CAVITY FIXINGSMetal fixings, setting tools, nylon fixings, toggles & self drill plasterboard
56
▪ ELECTRICAL FIXINGSVersatile range for cables, conduit, pipes, trunking and bundles
58
▪ SANITARYFixing sets & Sanitary Retail Range
60
▪ SCAFFOLD FIXINGSEyebolts, plugs, cover caps & supplimentary anchors
63
▪ INSULATION FIXINGSDiscs, supports & render fixings
65
▪ FOAM & SEALANTSFoam, adhesives, guns & cleaner 69
▪ DRILL BITS / DRIVE BITSDrill bits, chisel bits , drive bits, screw sets and screwdriver bits
72
▪ QUICK-FIX BRACKET SYSTEMStrap, plates, pliers & starter kit
78
▪ SCREWS - POWER-FAST ®
Power-fast, Powerfast construction & Powerful construction screws79
▪ COMPLIMENTARY FIXINGSDecking screw, site boxes & tool tray
82
▪ FIRESTOP For passive fire prevention 83
▪ SOLARFIX Installation system for photovoltaic & solar thermal panels 87
SAMONTEC - M&E For M&E installation systems 88
▪ TERMS & CONDITIONSCompany policy
94
3
For full product details please refer to the Main Catalogue Section
How to use the tables
Technical Product details Technical information is always placed towards the right hand side of each table. For further information including installations, applications and loads please refer to our Main Catalogue Folder or contact our Technical Sales Team. If a particular product does not require any relevant technical information the column is left blank or may be removed totally. For our Main Catalogue Folder please call 01491 827900 or go to www.fischer.co.uk
Products with a Shelf Life & Use By Datesfischer Fixings (UK) Ltd. will no longer be able to accept return of products with a shelf life or use by date. If a product is suspected of being faulty, then a return for testing and traceability will be accepted. If after further investigation, a product has been found to be mishandled or misused, the Customer may be liable for all carriage or disposal costs. For further information, please refer to Terms & Conditions at the rear of this pricelist.
Safety notificationAn application becomes ‘safety critical’ when anchor failures would cause risk to human life or cause serious injuries and /or lead to considerable economic consequences. If this is the case please use anchors with an ETA approval.
typeType is a short code to describe the product and its size.
ETAETA stands for European Technical Approval, each product with a blue square in this column has this approval.
qty Number of pieces per box/pack/bag.
discount groupThe number shows which discount group the product is in.
drill (mm)This shows the size of the drill bit required for a particular product.
min. anchor depth, length, max. usable length (mm)Shows the minimum to maximum usage lengths of this product to give the best loads.
Order No:-Please ensure you quote this number when placing your order.This action will speed up the ordering process.
£ price per 100 piecesThis is the price per 100 pieces or as otherwise stated.
approval symbolsA display of approvals and their symbols currently issued in the UK and Europe
FAZ II High performance anchor
Zinc plated steeltype Order No:
ETA min order qty
pcs.£ price
100 piecesdiscount
groupdrill
[mm]effective. anchor depth
[mm]length[mm]
max. usable length[mm]
pack content
FAZ II 8/100 94879 25 G35 8 45 165 100 -FAZ II 8/160 503251 20 G35 8 45 225 160 -FAZ II 10/10 94981 50 G35 10 60 95 10 -FAZ II 10/30 94983 25 G35 10 60 115 30 -FAZ II 10/50 94984 20 G35 10 60 135 50 -FAZ II 10/80 94985 20 G35 10 60 165 80 -
ETA-05/0069
4
CHEMICAL FIXINGSFIP 150 SF Injection Resin
Polyester Resin
13
FIS EM 390 S Injection Resin
Styrene Free Epoxy Resin
11 FIP 300 SF Injection Resin
Polyester Resin
13
FIS EM 585 S Injection Resin
Styrene Free Epoxy Resin
11 FIP C 700 Injection Resin
Polyester Resin
13
FIS EM 1500 S Injection Resin
Styrene Free Epoxy Resin
11 FIS DMS SApplicator Gun
13
FIS MR / FIS U MRMixer Nozzles
Static Mixer For Epoxy Resins
11 FIS DM S-LApplicator Gun
Use With FIS EM 585 S Resin Only
13
FIS S Mixer Nozzle & FIS Extension
Static Mixer for Epoxy Resin
11 FIS AM Applicator Gun
13
FIS SB 390 SSuperbondInjection Resin
Styrene Free Epoxy Resin
11 FIP Applicator Gun
For Co-AxialCartridges
13
FIS V 360 SInjection Resin(Standard grade)
Styrene Free Hybrid Vinylester
11 KP M2 Applicator Gun
13
FIS V 950 S Injection Resin(Standard grade)
Styrene Free Hybrid Vinylester
11 FIS V / FIS CC / FIP C Site Boxes
Resin Accessory Kits
14
FIS VW 360 S Injection Resin(Winter grade)
Styrene Free Hybrid Vinylester
12 FIS DC SDispenser Gun
BatteryOperated
14
FIS VS 150 CInjection Resin
Styrene Free Hybrid Vinylester
12 FIS APDispenser Gun
PneumaticGun
14
FIS VT 380 CInjection Resin
Styrene Free Vinylester
12 FIS DP S-LDispenser Gun
Use WithFIS EM 585 SResin
14
FIS VT 300 T Injection Resin
Styrene Free Vinylester
12 FIS AJDispenser Gun
Use WithFIS V 950 SResin
14
FIS HB 345 S Injection Resin
Styrene Free Epoxy Resin
12 FIS DPS/XL Dispenser Gun
Use With1500mlCartridges
14
FIS PM 360 S Powerbond Resin System
Styrene Free Epoxy Resin
13 R Eurobond Resin Capsule
Use With RGM Studs for Approval
14
FIS PSPowerbondSleeve
System With FIS PM 360 S & FIS A
13 RSB SuperbondResin Capsule
Use With RGM Studs for Approval
15
Fixings Index
RG M / A4Threaded Rod
Use With Resin Tubes Or Capsules
15-16
FRA Threaded Rod / Rebar
Use With FIS EM resin
24
RG MI InternalThreaded anchor
Use With Resin Tubes Or Capsules
16
STEEL FIXINGS
FTR MThreaded Rod
Use With Resin Tubes Or Capsules
17 FAZ II & FAZ II-K Anchor Bolt
Version -K (Shorter Length)
25-26
FIS AM / A4Threaded Rod
Use With Resin Tubes
17-18
FBN II & FBN II-KAnchor Bolt
Version -K (Shorter Length)
25-28
FHB II Highbond Anchor AS/AL
Use With Highbond Resin System
18-21
FXAAnchor Bolt
For Non-cracked Concrete
28
FHB II -PResin Capsule
Standard &Fast Curing
21-22
Torque Wrenches & Drive sockets
Anchor Accessories
29
FIS HK Injection Anchor Sleeve
Plastic Sleeve 22 FH II Anchor BoltType:S/SK/H/I/B
High Performance Anchor
29-31
FIS H L Injection Anchor Sleeve
Metal, Sleeve In 1M lengths
22 FZA ZYKON UndercutAnchor
Use With FZUB Drill Bit
31-32
FIS H N Injection Anchor Sleeve
Net Sleeve 23 FZEA II ZYKONHammersetAnchor
Use With FZUB Drill Bit
33
FIS E Internal Threaded Sockets
Use With FIS H Sleeves
23 FZUBDrill Bit
Use with FZA ZYKON Anchors
33
PBB Cone Drill & PBZ Centring Sleeve
Resin Anchor Set For Use In Aircrete
23 FZE Plus & FZED Plus Setting Tool
Use with FZAZYKON Anchors
33
FIS / BS Drill Hole Cleaning Brushes
BS - MetalFIS - Bristle
23 FBS - S Concrete Screw
Hexagon Head WithForged Washer
34
M Drill Hole Cleaning Brush
Metal Brush With M8 Thread
24 FBS-P / FBS-SK Concrete Screw
Pan Head & CountersunkHead
34
ABP Cleaning Gun& ABG Cleaning Pump
Drill Hole Cleaning Accessories
24 FBS-M8 & M8/10 Concrete Screw
Ext. M8 Thread & Int. 8/10 Thread
35
Centring Wedge & RA-SDS SettingTool
Overhead Wedge & Machine Setting Tool
24 EA II / EA II A4 Lipped Drop In Anchor
Use With Setting Tool
35
Setting Tools: SK SW 8 / SDS Plus & Max
Assorted Adapters
24 EA N Drop-in Anchor
Use With Setting Tool
35
INDEX
6 INDEX
FDA-R Lipped Drop InAnchor
Use With Setting Tool
35 SXR - FUS / A4Frame FixingWith Approval
Hex. Head With Intergrated Washer
43
EA-ST / EAW H /EAW H Plus
Setting Tools 36 ADT Cover CAP To fit safety Screws Torx bit T40
44
EA II S-SDS Machine SDSSetting Tools
36 SXRL - T /A4Frame FixingWith Approval
Torx Head With Countersunk Safety Screw
45
FHY Ceiling Anchor
Hollow Ceiling Anchor
36 SXRL - FUS / A4Frame FixingWith Approval
Hex. Head With Intergrated Washer
45
FNA II / FNA II M6 Hammerset Nail Anchor
With Nail Head / Thread & Flange Nut
37 FUR - TUniversal Frame Fixing
Torx Head With Countersunk Safety Screw
46
FNA II H / FNA II OE Hammerset Nail Anchor
Nail Anchor with Hook Or Eye
38 FUR- S / 8-10Universal Frame Fixing
Hex. Head With Safety Screw
46
FNA II Setting ToolsS-SDS/S-SBO/FNA S-H
Hand & Machine Setting Tools
38 SXS - TFrame Fixing
Torx Head With CO-NA Countersunk Screw
46
TA M BP Heavy Duty Anchor
Anti-theft Security with Twist Off Head
38 SXS - FUS / A4Frame Fixing
Torx Head With CO-NA Hex. Head & Intergrated Washer
47
FA Demountable Throughbolt
Can be Demounted for a Flush Finish
38 VBS - MRemedial WallTie
Facade Repair For Two- LeafCavity Walls
47
FSA S Sleeve Anchor
Hex.Head for Non-cracked Concrete
39 SRS Frame Fixing
Standard Frame Fixing
47
FSA GB Sleeve Anchor
For Non-cracked Concrete
39 S10 J 75 S Adjustable Frame Fixing
Variable Adjustment Of Timber Substructures
48
FWB WallboltTypes: FWB P & FWB L
Projecting &Loose Bolts
40-41
N-Z /A2Hammerfix
Nail Type Hammer-in Fixing
48
FWB-E / FWB-H Wallbolt
Anchor With Hook Or Eye
41 N-FZ /A2Hammerfix withCollar
Nail Type Hammer-in Fixing
49
FRAME FIXINGN-FN Hammerfix
With Collar And Plastic Nail
49
SXR - TFrame Fixing With Approval
Torx Head with Countersunk Safety Screw
42 N-M Hammerfix
WithConnection Thread M6/M8
49
SXR-ZFrame Fixing With Approval
Pozi Head Countersunk Safety Screw
43 N-D A2Hammerfix
With Isolating Washer
49
7
For full product details please refer to the Main Catalogue Section
INDEX
F-S Window Nylon Frame Fixing
For Window & Door Frames
49 Wet N Fix Repair Pads
Repair Pads For Damaged Drill Holes
53
ADF / ADM Cover Caps
For FS & F10 FrameFixings
49
AIRCRETE FIXINGS
F-10 M MetalFrame Fixing
For Window & Door Frames
49 FPX-I Internal Threaded Anchor
For Use In Aircrete
54
TL Window Frame Fixing
For Window & Door Frames
50 FPX-I Setting Tools
FPX-I M6 /FPX-I M8 - M12
54
FFSZ Frame Cylinder HeadFixing Screw
For Window, Door Frames& Squared Timbers
50 GB Aircrete Anchor
Nylon Fixing 54
FFS Frame Flat HeadFixing Screw
For Window, Door Frames& Squared Timbers
50 FTP M / KAircreteTurbo Anchor
Metal / Plastic 54-55
FFS A-W Cover Cap
For FSSFixing Screw
50 FTP EM / EKSetting tools
For FTP M & FTP K Fixings
55
GENERAL FIXINGSPBB Cone Drill & PBZ Centring Sleeve
Use With Resin (For Use In Aircrete)
55
UX Universal PlugType: UX/UX-RUX R S
For All Building Materials
51
CAVITY FIXINGS
SX High Performance Wallplug
4-WayExpansion Plug
51 HM-S / HM-SS & HM-H Cavity Fixings
Metal Fixings With Screw or Hook
56
S Plug Nylon Wallplug
ClassicWallplug
52 HM Z Setting Tools
HMZ 1 &HMZ 2
56
MS Nylon Wallplug
For Metric Screws
52 KT / KD / KDH Spring Toggles
Automatic Expansion Types 3 + 4
56
W / CP Plastic Wallplug
Standard / Contract Wallplugs
52 KD / KDH /KM Gravity Toggles
Type: 5+6+8 & KM10
57
WLLFixing Set
Coachscrew, Plug & Washer set
53 PDBoard Fixing
Multi-purposeFixing
57
M Expansion Unit
For Metric Screws
53 PDM MetalPlasterboard Fixings
PDM100 Box / PDM150 Tub
57
PA 4 Brass Anchor
For Thin Board Materials
53 PDM NylonPlasterboard Fixings
PDN100/PDN S 200
57
8 INDEX
ELECTRICAL FIXINGS SANITARY FIXINGS
SF plus LS Cable Strap
For Cables & Cable Bundles
58 CBB1 Sanitary Fixing Set
Hand Rinse / Corner Basin
61
SF plus ES / ZS Clamps
For Conduit & Flexible Pipes
58 WB5N Sanitary Fixing Set
Toilet Pan To Floor Side Fixing
61
SF plus SDFixing Pin
Fixing Pin 58 WB10 Sanitary Fixing Set
Toilet Pan To Floor Verticle Fixing
62
SF Plus KB / KB Cable Clasps
SF Plus KB 8-16 & KB 8-16 Cable Clasp
58 WD 8 Sanitary Fixing Set
Hand Rinse / Corner Basin
62
SHA Cable Harness
With Assorted Connection Pieces
58 WPB 1 Sanitary Fixing Set
Wash Basin With Pedestal
62
RC Pipe Clip
For Plastic Insulation Pipes
59 WST 140 Sanitary Fixing Set
Wash Basin 62
SCH Saddle Fixing
Ideal For Running Lines Of Cables
59 SCAFFOLD FIXINGS
SANITARY FIXINGSGS 12 Scaffold Eye Bolt
Standard Anchor With Welded Eye
63
WD Wash basin &
Urinal Fixing
With UX Plug, Studs & Nuts
60 S14 ROE Plug Ideal For Solid Building Material
63
WST Wash Basin
Fixing Set
With S-Plug, Studs, Nuts & Bushes
60 AD 12x40 Scaffold Cover Cap
For Closing Off Remaining Drill Holes
63
WCN Toilet Fixing
Set
With S-plug, Screws, Cover Cap & Collars
60 M16 Scaffold Anchor, 54mm Eye
For Free Standing Scaffolding
63
WCR 8S RD Fixing
Set
With S-RD Plug, Screws & Cover Caps
60 EA N Drop In Anchor
With Internal Thread
64
WB5N Toilet /
Bidet Fixing Set
Plugs, Screws, Washers, Bushes, Brackets & Caps
60 EAW Setting Tool
Use With A Hammer To Set The Anchor
64
WL / WLL W.C.Sanitary Sets
W.C. &SanitaryFixings
61 GS 8 Eye Bolt Welded Eye 64
WB9 Sanitary Fixing Set
For Wall Hung WC‘s & Wash Basins
61S12 R Nylon Wallplug
Long Length Plug
64
9
For full product details please refer to the Main Catalogue Section
INDEX
INSULATION FIXINGSProfessional Gun
Variable Control Of Dispensing foam
70
DHK 45 / DHK Insulation Supports
For Insulation Boards
65 KP M2Sealant Gun
For Fast And Easy Extrusion
70
DHM INOX / DHM 80
Metal Insulation Retaining Washer
65 Hand Foam Nozzles
Spare NozzlesPack
70
DIPK 8 / 10 Render Fixing
Glass Fibre Reinforced Plastic Nail
66 FiAMSealant
FireStop Acoustic MasticSealant
70
FIF-S Insulated Render Fixing
With Steel & Plastic Nail
66 FFRSSealant
Fire Rated Silicone Sealant
70
Thermax 8 / 10 Stand-off Fixing
With Thermal Bridging
67 DMSSealant
Flexible General Purpose Silicone
71
HV/ISO/DT/DTM Insulation Discs
Use With Frame Fixings, Screws & Nails
67 Express CementGrey / Sand
Ready To Use Mortar For Joint Repair
71
DHT S Retaining Disc
Disc With Screw
68
DRILL & DRIVE BITS
FID 50 / FID 90 Insulation Fixing
Spiral Thread Taps Into Insulating Board
68 SDS Plus IV Quattric PGM Approved
ExpertHammerdrill Drill Bit
72
FOAMS & SEALANTSSDS Plus II Pro
PGM Approved
Professional 2-Cutter Drill Bit
72
B3 Hand/Gun Foam
General Hand Foam
69 SDS Max II & IV
PGM Approved
Professional Hammerdrill Drill Bit
73
B2 Hand/Gun Foam
Foam With Fire Retardant Additives
69 SDS Plus / Max Chisel Range PGM Approved
Assorted Head Types: Point, Flat & Hollow
73
Fire Stop Hand/Gun Foam
Upto 4HR Fire Resistance
69 SDS - Plus Drill Bit
For Use WithHammerdrill
74
PU1 B3 Fast Cure Hand Foam
Reusable, No Gun Needed
669 PM - Professional
Masonry Drill Bit
For Use WithHammerdrill
75
PU Foam Cleaner
Safe Removal of Uncured Foam
70 TM - Trade Masonry Drill Bit
For Use WithRotary Percussion
75
StandardFoam Gun
Controlled Dispensing Of Foam
70 WB - Brad Point Drill Bit
Suitable For All Types Of Wood
76
*Must be used with FiAM/FFRS to form barrier*
DEC
ExprEss CEm
EntprEm
ium1 component sealing compound
Acrylic dispersion based Sand colour
Readyforuse
Perfectforrepairworkstow
alls,tilesandhippedstoneedges
Paintableaftercuring
Suitableforindoorandoutdoorapplications D
EC
ExprEss
CEmEn
tpr
Emiu
m1 com
ponent sealing compound
Acrylic dispersion basedGrey colour
Readyforuse
Perfectforrepairworkstow
alls,tilesandhippedstoneedges
Paintableaftercuring
Suitableforindoorandoutdoorapplications
10 INDEX
FW Flat WoodDrill Bit
Suitable For All Types Of Wood
76
COMPLIMENTARY PRODUCTS
HSSHigh Speed SteelDrill Bit
Suitable For Metals, Wood & Plastic
76 TDSDecking Screws
Recommendedfor soft woodType: 8x2 / 8x2½ / 8x3
82
AUGER Steel Drill Bit
Suitable for Timber
77 Tooltray Plastic with Metal Handle
82
FPB - Prof-Drive / Screwdriver Bits
Type:Torx / Philips & Pozi
77 HWK Site boxes
Two sizes: Small and Large
82
QUICK-FIX BRACKET SYSTEM
Quick-fix Strap Punched Steel Strap
78
FIRESTOP SPECIALIST PRODUCTS
Quick-fix Back Plate
For Fixing Ancillary Items
78FireStop Product Range
For Passive Fire Prevention
83
Quick-fix Pliers For Bending Strap
78SOLARFIX SPECIALIST PRODUCTS
Quick-fix Starter Kit
Pliers & Back Plate
78 SOLARFIXInstallation Systems
For Photovoltaic & Solar Thermal Panels
87
FPF-SZ Powerfast Screw
Screw 79
SAMONTEC SPECIALIST PRODUCTS
FPF-SZ A2 Powerfast Screw
ScrewStainless Steel Pozi
79 SAMONTEC M&E Product Range
For M&E Installation Systems
89
FPF Powerfast Assortment boxes
Assorted Qtys:2,300 / 1,350 & 245
80
FPF -ST YZPConstructionPowerfast Screw
Construction Screw, Countersunk
80
FPF -WT YZPConstructionPowerfast Screw
Construction Screw, Flange Head
81
FWC-CSWashers
For Countersunk Heads
81
FPF -ZT YZPPowerful ScrewCylinder head
Construction Screw, Torx
82
11
For full product details please refer to the Main Catalogue Section
CHEMICAL FIXINGS
FIS EM Epoxy injection resin
Items to order only
Sales unit
£ Price per piece
Discount group
Contents
Item Art.-No. ETA [pcs]
FIS EM 390 S 093049 ■ 6 £26.23 G62 1 cartridge 390 ml, 2 x static mixer FIS FIS MR FIS EM 585 S 508831 ■ 6 £51.64 G62 1 cartridge 585 ml, 2 x static mixer FIS FIS U MRFIS EM 1500 S 512080 ■ 6 £102.74 G62 1 cartridge 1500 ml, 2 x static mixer FIS FIS U MRFIS MR 096448 — 10 £13.63 G62 static mixersFIS U MR 520593 — 10 £12.38 G62 static mixers for 585ml & 1500mlFIS Extension nozzle 048983 — 10 £10.63 G52 extension nozzles
Resin nozzle FIS Extension
Injection resin FIS EM 390 S
Injection resin FIS EM 1500 S
Injection resin FIS EM 585 S
Static mixer FIS MR
FIS V Hybrid, vinylester injection resin (Standard Grade)
Item to order only
Sales unit
£ Price per piece
Discount group
Contents
Item Art.-No. ETA [pcs]
FIS V 360 S 094405 ■ 6 £26.15 G63 1 cartridge 360 ml, 2 x static mixer FIS SFIS V 950 S 017101 ■ 1 £108.59 G63 1 cartridge 950 ml, 1 x static mixer big, 1 x static mixer FIS SFIS S 061223 — 10 £2.59 G52 10 static mixer
Injection resin FIS V 360 S Injection resin FIS V 950 S
Static mixer FIS S
EPOXY RESIN
FIS SB Superbond Injection resin, Option1
Sales unit
£ Price per piece
Discount group
Contents
Item Art.-No. ETA [pcs]
FIS SB 390 S 518831 ■ 12 £29.91 G63 1 cartridge 390 ml, 2 x static mixer FIS Mixer redFIS MR 96448 — 10 £13.63 G52 -FIS Extension nozzle 48983 — 10 £10.63 G52 -
Resin nozzle FIS MR
Resin nozzle FIS Extension
Resin nozzleFIS Extension
VINYLESTER HYBRID RESIN
Static mixer FIS U MR
12
FIS VW Hybrid, vinylester injection (Winter grade)
Sales unit
£ Price per piece
Discount group
Contents
Item Art.-No. ETA [pcs]
FIS VW 360 S 090753 ■ 6 6 £28.82 1 cartridge 360 ml, 2 x static mixer FIS SFIS S 061223 — 10 10 £2.59 10 static mixer
Injection resin FIS VW 360 S Static mixer FIS S
FIS VT Vinylester Injection Resin
Item to order only Sales unit£ Price
per pieceDiscount
group
Contents
Item Art.-No. [pcs]
FIS VT 380 C 059118 ■ 12 £19.40 G63 1 cartridge 380 ml, 2 x static mixer FIS SFIS VT 300 T 512933 ■ 12 £20.80 G63 1 cartridge 300 ml, 2 x static mixer FIS SFIS S 061223 — 10 £2.59 G52 10 static mixer
Injection resin FIS VT 380 C Injection resin FIS VT 300 T
CHEMICAL FIXINGS
FIS HB 345 S Highbond injection resin
Sales unit
£ Price per piece
Discount group
Contents
Item Order No. ETA [pcs]
FIS HB 345 S 033211 ■ 6 £36.89 G63 1 cartridge 360 ml, 2 x static mixer FIS SFIS FIS MR 096446 — 10 £13.63 G52 10 x static mixer
Injection resin FIS HB 345 S static mixer FIS FIS MR
FIS VS Hybrid, vinylester Injection Resin
Sales unit
£ Price per piece
Discount group
Contents
Item Art.-No. ETA [pcs]
FIS VS 150 C 045302 ■ 6 £19.89 G63 1 cartridge 150 ml, 2 x static mixer
FIS S 061223 — 10 £13.63 G52 static mixerFIS Extension nozzle 048983 — 10 £10.63 G52 extension nozzle
Resin nozzle FIS ExtensionInjection resin FIS VS 150 C
Static Mixer FIS S
13
For full product details please refer to the Main Catalogue Section
FIS PM 360 S Powerbond injection resin
Sales unit
£ Price per piece
Discountgroup
Contents
Item Art.-No. ETA [pcs]
FIS PM 360 S 518785 ■ 12 £36.67 G62 1 cartridge 360 ml, 2 x static mixer FIS FIS MRFIS FIS MR 96448 10 £13.63 G52 - *ETA when used as a system with sleeve FIS PS and threaded rod FIS A / RGM
Injection resin FIS PM 360 S
Resin nozzle FIS FIS MR
FIS PS Powersleeve
Item to order only Sales
unit£ Price
per pieceDiscount
groupDrill holediameter
Min drilldepth
Min anchorage depth
fits
Item Art.-No. ETA [pcs] [Ø mm] [mm] [mm]
FIS PS M10 517871 ■ 10 £186.71 G50 14 60 60 FIS A M10, RGM10
FIS PS M12 517872 ■ 10 £248.24 G50 16 72 72 FIS A M12, RGM12FIS PS M16 517873 ■ 10 £212.18 G50 20 96 96 FIS A M16, RGM16 *ETA when used as a system with resin FIS PM 360S and threaded rod FIS A / RGM
Sleeve FIS PS for threaded rod FIS A
Dispenser Guns
Item to order only Sales unit
£ Price per piece
Discount group
Adapted for
Item Art.-No. [pcs]
FIS DM S 511118 1 £338.65 G52FIS SB 390 S, FIS PB 360 S, FIS V 360 S, FIS HB 345 S, FIS EM 390 S, FIS VS 150 C, FIS VW 360 S,FIS P 360 S, FIS P 300 T and 1K-cartridges
FIS DM S-L 510992 1 £663.72 G52 FIS EM 585 S
FIS AM 056052 1 £126.06 G52 FIS V 360 S, FIS HB 345 S, FIS VW 360 S
FIP Co Axial 042741 1 £89.13 G52 FIP 700, FIP 380 C, FIS VT 380 C
KP M2 053117 1 £42.11 G52 FIS V 150 C, FIP 300 SF, FIS VS 300 T, FIP 150 SF
Dispenser KP M2 Dispenser FIS AMDispenser FIS DM S-L Dispenser FIP Co-Axial Dispenser FIS DM S
CHEMICAL FIXINGS
FIS P / FIP Polyester Resin
Item
Art.-No.Contents
FIP 150 SF 507929 12 £16.89 G53 1 cartridge 150 ml, 1 x static mixer FIS SFIP 300 SF 98184 6 £26.23 G53 1 cartridge 300 ml, 1 x static mixer FIS SFIP C 700 98183 6 £15.83 G53 1 cartridge 380 ml, 1 x static mixer FIS SFIS S 061223 10 £2.59 G52 10 x static mixer
Injection resin FIP 300 SF Injection resin FIP C 700Injection resin FIP 150 SF
POLYESTER RESIN
14
Resin Accessory Boxes
Item to order onlySales unit
£ Price per piece
Discount group Contents
Item Art.-No. [pcs]
FIS V site box 42740 1 £146.69 G50 1 x toolbox, 1 x FIS brush set, 1 x ABK blow out pump, 1 x FIS AM gun, 5 x static mixers
FIS CC Site box 42738 1 £297.77 G50 1 x toolbox, 1 x FIS brush set, 1 x ABK blow out pump, 1 x FIS DMS gun, 5 x static mixers
FIPC Site Box 42737 1 £143.97 G50 1 x toolbox, 1 x FIS brush set, 1 x ABK blow out pump, 1 x FIPC gun, 5 x static mixers
▪ Please note, For installation in accordance to European Technical Approval please purchase BS Metal Brushes for applications
Resin accessory box FIS V Resin accessory box FIS CC
Dispenser Guns
Item to order only Sales unit
£ Price per piece
Discount group
Adapted for Performance data
Item Art.-No. [pcs]
FIS DC S 513423 1 £476.10 G18FIS HB 345 S, FIS SB 390 S, FIS PB 360 S, FIS EM 390 S, FIS V 360 S, FIS P 300 T, FIS VS 150 C and Silicone cartridges
Use with charger DCC 4000 / battery pack DC
Battery pack DC 513425 1 £93.15 G18 - Battery pack 12 V // 2,0 Ah // Ni-MH
FIS AP 058027 1 £311.70 G18
FIS V 360 S, FIS HB 345 S, FIS SB 390 S, FIS PB 360 S, FIS HB 150 C, FIS EM 390 S, FIS VS 150 C, FIS VW 360 S, FIS P 300 T, and 1K-cartridge
Recommended pressure 6 barAir compression Max. 40I/min
FIS DP S-L 511125 1 £371.82 G18 FIS EM 585 SRecommended pressure 6 barair consumption Max 40I/min
FIS AJ 016251 1 £642.08 G18 FIS V 950 SRecommended pressure 6 barair consumption Max 40I/min
FIS DPS/XL 512401 1 £711.26 G18 1500ml Shuttle cartridges i.e. FIS EM 1500Recommended pressure 6 barair consumption Max 40I/min
DispenserFIS DPS/XL
Dispenser FIS DC S
DispenserFIS DP S-L
Dispenser FIS AP
Dispenser FIS AJ
CHEMICAL FIXINGS
R Eurobond resin capsule
Item to order onlyArt-No: ETA
Sales unit[pcs]
£ Price per piece
Discount group
Drill hole diameter[Ø mm]
min. drill hole depth[mm]
fits
R M 8 050270 ■ 10 £146.11 G50 10 80 RG M 8R M 10 050271 ■ 10 £148.02 G50 12 90 RG M 10R M 12 050272 ■ 10 £164.42 G50 14 110 RG M 12R M 16 050273 ■ 10 £252.44 G50 18 125 RG M 16 R M 20 050274 ■ 10 £284.63 G50 25 170 RG M 20R M 24 050275 ■ 5 £602.55 G50 28 210 RG M 24 R M 30 050276 ■ 5 £802.16 G50 35 280 RG M 30For ETA approval, must be used with RG M threaded rods. Can also be used with FTR M studs.
15
For full product details please refer to the Main Catalogue Section
RSB Superbond Resin Capsule
Items to order only Sales unit
£ Price per piece
Discount group
Drill hole diameter
Drill hole depth
Anchorage depth
Suitable for
Item Art.-No. ETA [pcs] [Ø mm] [mm] [mm]
RSB 8 518807 ■ 10 £205.86 G50 10 80 80 RG M8RSB 10 Mini 518820 ■ 10 £211.14 G50 12 75 75/150* RG M10RSB 10 518821 ■ 10 £242.81 G50 12 90 90 RG M10/RG M8IRSB 12 Mini 518222 ■ 10 £226.98 G50 14 75 75/150* RG M12RSB 12 518823 ■ 10 £263.93 G50 14 110 RG M12/RG M10IRSB 16 Mini 518224 ■ 10 £316.71 G50 18 95 95/190* RG M16RSB 16 518225 ■ 10 £380.05 G50 18 125 125 RG M16/RG M12IRSB 16 E 518826 ■ 10 £432.84 G50 18 160 160 RG M16IRSB 20 518827 ■ 10 £633.42 G50 24 170 170 RG M20IRSB 20 E/24 518828 ■ 5 £791.78 G50 24 210 210 RG M20/RGM 24/RG M20IRSB 30 518829 ■ 5 £1,266.84 G50 30 280 280 RG M30
*2 x mini cartridges / double embedment depth.
Note:See Main Catalogue for capsule depths and uses.
RG M Threaded rod 5.8 Steel Grade
Items to order onlyzinc-plated
steel5.8
Sales unit
£ Price per piece
Discount group
Drill hole diameter
Anchorage depth
Fixture thickness
Item Art.-No. ETA [pcs] [Ø mm] [mm] [mm]RG M 8 x 115 050256 ■ 10 £128.02 G50 10 80 14RG M 8 x 150 095698 ■ 10 £189.67 G50 10 80 54RG M 8 x 250 095699 ■ 10 £266.04 G50 10 80 154RG M 10 x 130 050257 ■ 10 £160.73 G50 12 90 20RG M 10 x 165 050280 ■ 10 £220.59 G50 12 90 55RG M 10 x 190 050281 ■ 10 £238.83 G50 12 90 80RG M 10 x 250 095703 ■ 10 £313.83 G50 12 90 140RG M 10 x 350 095718 1) ■ 10 £883.05 G50 12 98 240RG M 12 x 160 050258 ■ 10 £233.44 G50 14 110 26RG M 12 x 220 050283 ■ 10 £344.63 G50 14 110 86RG M 12 x 250 050284 ■ 10 £388.93 G50 14 110 116RG M 12 x 300 050285 ■ 10 £427.56 G50 14 110 166RG M 12 x 380 095720 ■ 10 £1,044.23 G50 14 110 246RG M 16 x 165 050287 ■ 10 £480.87 G50 18 125 8RG M 16 x 190 050259 ■ 10 £445.44 G50 18 125 33RG M 16 x 250 050288 ■ 10 £641.41 G50 18 125 93RG M 16 x 300 050289 ■ 10 £727.80 G50 18 125 143RG M 16 x 380 095722 1) ■ 10 £1,484.60 G50 18 125 223RG M 16 x 500 095723 1) ■ 10 £1,876.73 G50 18 125 343RG M 20 x 260 050260 ■ 10 £824.79 G50 25 170 54RG M 20 x 330 E 090718 ■ 10 £1,330.24 G50 25 170 124RG M 20 x 350 095707 ■ 10 £1,312.28 G50 25 170 144RG M 20 x 500 095725 ■ 10 £2,190.90 G50 25 170 294RG M 24 x 300 050261 ■ 10 £1,509.42 G50 28 210 61RG M 24 x 400 095727 ■ 10 £3,460.45 G50 28 210 161RG M 24 x 600 095728 ■ 10 £2,900.43 G50 28 210 361RG M 30 x 380 050262 ■ 10 £2,651.04 G50 35 280 651) Straight cut, setting tool enclosed. 2) Delivery time upon request. E - extended anchoring depth.ETA applies if used with appropriate fischer resin.
CHEMICAL FIXINGS
16
RG M Threaded rod A4
Items to order onlyzinc-plated steel 5.8
Sales unit
£ Price per piece
Discount group
Drill hole diameter
Anchorage depth
Fixture thickness
Item Art.-No. ETA [pcs] [Ø mm] [mm] [mm]Stainless steel A4-70RG M 8 x 115 050263 ■ 10 £214.26 G50 10 80 14RG M 8 x 150 050293 ■ 10 £428.79 G50 10 80 54RG M 8 x 250 095700 ■ 10 £803.80 G50 10 80 154RG M 10 x 130 050264 ■ 10 £357.20 G50 12 90 20RG M 10 x 165 050294 ■ 10 £622.84 G50 12 90 55RG M 10 x 190 050296 ■ 10 £691.84 G50 12 90 80RG M 10 x 250 095701 ■ 10 £945.48 G50 12 90 140RG M 12 x 160 050265 ■ 10 £402.06 G50 14 110 26RG M 12 x 220 050297 ■ 10 £1,117.86 G50 14 110 86RG M 12 x 250 095702 ■ 10 £1,236.27 G50 14 110 120RG M 12 x 300 095705 ■ 10 £2,055.98 G50 14 110 166RG M 12 x 380 095710 1) ■ 10 £2,906.95 G50 14 110 246RG M 16 x 165 095704 ■ 10 £1,603.86 G50 18 125 8RG M 16 x 190 050266 ■ 10 £926.33 G50 18 125 33RG M 16 x 250 050298 ■ 10 £2,212.84 G50 18 125 93RG M 16 x 300 050299 ■ 10 £2,678.32 G50 18 125 143RG M 16 x 380 095712 ■ 10 £4,243.99 G50 18 125 223RG M 20 x 260 050267 ■ 10 £2,333.06 G50 25 170 54RG M 20 x 350 095706 ■ 10 £5,273.96 G50 25 170 144RG M 24 x 300 050268 ■ 10 £6,909.72 G50 28 210 61RG M 24 x 400 095715 ■ 10 £12,273.23 G50 28 210 161RG M 30 x 380 090726 ■ 10 £16,976.01 G50 35 280 65
1) Straight cut, setting tool enclosed. 2) Delivery time upon request. E - extended anchoring depth.ETA applies if used with appropriate fischer resin.
RG MI Internal Threaded Anchor
Items to order onlyzinc-plated
steelSales unit
£ Price per piece
Discount group
Drill hole diameter
Min. bolt penetration
Max. bolt penetration
Fits capsules
Item Art.-No. ETA [pcs] [Ø mm] [mm] [mm]
RG 8 x 75 M 5 I 048221 1) — 10 £241.83 G51 10 8 14 RM8 (50270)RG 10 x 75 M 6 I 048222 1) — 10 £283.67 G51 12 10 16 RM10 (50271)RG 12 x 90 M8 I 050552 1) ■ 10 £439.14 G51 14 12 18 RM12 (50272)RG 16 x 90 M10 I 050553 1) ■ 10 £579.58 G51 18 15 23 RM14 (50278)RG 18 x 125 M12 I 050562 1) ■ 10 £755.21 G51 20 18 26 RM16E (79838)RG 22 x 160 M16 I 050563 1) ■ 10 £926.82 G51 24 24 35 RM16E (79838)RG 28 x 200 M20 I 050564 1) ■ 10 £1,486.23 G51 32 30 45 RM20 (50274)Stainless steel A4-70RG 12 x 90 M8 I 050565 1) ■ 10 £969.87 G51 14 12 18 RM12 (50272)RG 16 x 90 M10 I 050566 1) ■ 10 £2,148.91 G51 18 15 23 RM14 (50278)RG 18 x 125 M12 I 050567 1) ■ 10 £2,075.11 G51 20 18 26 RM16E (79838)RG 22 x 160 M16 I 050568 1) ■ 10 £3,777.12 G51 24 24 35 RM16E (79838)RG 28 x 200 M20 I 050569 1) ■ 10 £5,602.68 G51 32 30 45 RM20 (50274)1) Setting tool is included in each package.
ETA applies if used with appropriate fischer resin.
CHEMICAL FIXINGS
17
For full product details please refer to the Main Catalogue Section
FTR M Threaded Rod 5.8 steel grade
zinc-plated steel 5.8
Sales unit
£ Price per piece
Discount group
Drill hole diameter
Effect.anchoring depth
fixture thickness
Item Art.-No. [pcs] [Ø mm] [mm] [mm]
FTR M8 x 110 045809 10 £43.71 G50 10 8 14FTR M10 x 130 045810 10 £74.36 G50 12 10 16FTR M12 x 160 045812 10 £107.92 G50 14 12 18FTR M16 x 190 045813 10 £189.73 G50 18 15 23FTR M20 x 260 045814 10 £451.99 G50 24 18 26FTR M24 x 300 045815 10 £799.39 G50 28 24 35Stainless steel HDGFTR M HDG 8 x 110 502914 10 £56.84 G50 10 12 18FTR M HDG 10 x 130 502915 10 £82.78 G50 12 15 23FTR M HDG 12 x 160 502916 10 £130.08 G50 14 18 26FTR M HDG 16 x 190 502917 10 £259.85 G50 18 24 35FTR M HDG 20 x 260 502918 10 £504.26 G50 24 30 45FTR M HDG 24 x 300 502919 10 £805.53 G50 28ETA applies if used with appropriate fischer resin
FIS A M Threaded rod
Items to order onlyzinc plated, steel
grade 5.8Sales unit
£ Price per 100 pieces
Discount group
Drill hole diameter
Min. anchoring
depth
Fixture thickness
Max. anchorage
depth
Fixture thickness
Item Art.-No. ETA [pcs] [Ø mm] [mm] [mm] [mm] [mm]FIS A M 8 x 90 90274 10 £78.86 G51 10 - - - -FIS A M 8 x 110 90275 10 £87.73 G51 10 - - - -FIS A M 8 x 130 90276 10 £115.33 G51 10 - - - -FIS A M 10 x 110 90278 ■ 10 £104.98 G51 14 60 37 96 1FIS A M 10 x 130 90279 ■ 10 £115.82 G51 14 60 57 116 1FIS A M 10 x 150 90281 10 £128.64 G51 14 60 77 120 17FIS A M 10 x 200 90282 ■ 10 £172.99 G51 12 60 127 186 1FIS A M 12 x 120 44971 ■ 10 £134.55 G51 14 70 34 103 1FIS A M 12 x 140 90283 ■ 10 £148.35 G51 14 70 54 123 1FIS A M 12 x 160 90284 ■ 10 £154.27 G51 14 70 74 143 1FIS A M 12 x 180 90285 ■ 10 £181.37 G51 14 70 94 163 1FIS A M 12 x 210 90286 ■ 10 £197.63 G51 14 70 124 193 1FIS A M 12 x 260 90287 ■ 10 £247.90 G51 14 70 174 240 4FIS A M 12 x 1000* 509216 ■ £469.28 G51 14 70 - 240 -FIS A M 16 x 175 90288 ■ 10 £291.28 G51 18 80 75 154 1FIS A M 16 x 200 90289 ■ 10 £319.37 G51 18 80 100 179 1FIS A M 16 x 300 90291 ■ 10 £459.34 G51 18 80 200 279 1FIS A M 16 x 1000* 509217 ■ 10 £841.05 G51 18 80 - 320 -FIS A M 20 x 245 90292 ■ 10 £587.98 G51 24 90 131 220 1FIS A M 20 x 290 90293 ■ 10 £621.98 G51 24 90 176 265 1FIS A M 24 x 290 90294 ■ 5 £919.67 G51 28 96 165 260 1FIS A M 24 x 380 90295 ■ 5 £1,363.24 G51 28 96 255 350 1FIS A M 30 x 340 90296 ■ 5 £1,473.64 G51 35 120 185 304 1FIS A M 30 x 430 90297 ■ 5 £2,182.37 G51 35 120 275 394 1Zinc plated steel, grade 8.8FIS A M 10 x 150 517935 ■ 10 £180.35 G51 12 60 77 136 1FIS A M 10 x 190 517936 ■ 10 £199.44 G51 12 60 117 176 1FIS A M 12 x 160 517937 ■ 10 £224.91 G51 14 70 74 143 1FIS A M 12 x 200 517938 ■ 10 £260.98 G51 14 70 114 183 1FIS A M 16 x 200 517939 ■ 10 £437.08 G51 18 80 100 179 1FIS A M 16 x 250 517940 ■ 10 £568.63 G51 18 80 150 229 1ETA approved for use with Powerbond Resin System: FIS PM 360 resin + FIS PS power sleeve + FIS A/RGM threaded rod
Threaded rod FIS A 5.8(Available in steel, grade 8.8)
CHEMICAL FIXINGS
18
FIS A M Threaded rod A4
Items to order onlyzinc plated,
steelSales unit
[pcs]£ Price
per 100 piecesDiscount
groupDrill hole diameter
Min anchoring
depth
Max. fixture
thickness
Max. anchorage
depth
Max. fixture
thickness
Item Art.-No. ETA [Ø mm] [mm] [mm] [mm] [mm]
Stainless steel A4
FIS A M 8 x 90 90440 ■ 10 G51 10 60 19 78 1FIS A M 8 x 110 90441 ■ 10 G51 10 60 39 98 1FIS A M 8 x 130 90442 ■ 10 G51 10 60 59 118 1FIS A M 8 x 175 90443 ■ 10 G51 10 60 104 160 4FIS A M 10 x 110 90444 ■ 10 G51 12 60 37 96 1FIS A M 10 x 130 90447 ■ 10 G51 12 60 57 116 1FIS A M 10 x 150 90448 ■ 10 G51 12 60 77 136 1FIS A M 10 x 200 90449 ■ 10 G51 12 60 127 186 1FIS A M 12 x 120 44974 ■ 10 G51 14 70 34 103 1FIS A M 12 x 140 90450 ■ 10 G51 14 70 54 123 1FIS A M 12 x 160 90451 ■ 10 G51 14 70 74 143 1FIS A M 12 x 180 90452 ■ 10 G51 14 70 94 163 1FIS A M 12 x 210 90453 ■ 10 G51 14 70 124 193 1FIS A M 16 x 175 90455 ■ 10 G51 18 80 75 154 1FIS A M 16 x 200 90456 ■ 10 G51 18 80 100 179 1FIS A M 16 x 250 90457 ■ 10 G51 18 80 150 229 1FIS A M 20 x 245 90459 ■ 10 G51 24 90 131 220 1FIS A M 10 x 1000 509215 ■ 10 G51 12 60 - 200 -FIS A M 12 x 1000 509216 ■ 10 G51 14 70 - 240 -FIS A M 16 x 1000 509217 ■ 10 G51 18 80 - 320 -ETA approved for use with Powerbond Resin System: FIS PM 360 resin + FIS PS power sleeve + FIS A/RGM threaded rod
Threaded rod FIS A M
CHEMICAL FIXINGS
FHB II - AS
Items to order onlyzinc-plated
steelSales unit
£ Price per 100 pieces
Discount group
Drill hole diameter
Drill hole depth
Anchorage depth
Fixture thickness
Item Art.-No. ETA [pcs] [Ø mm] [mm] [mm] [mm]
FHB II-A S M10 x 60/10 097072 ■ 10 £750.86 G57 10 75 60 10FHB II-A S M10 x 60/20 097073 ■ 10 £821.45 G57 10 75 60 20FHB II-A S M10 x 60/60 097074 ■ 10 £1,042.32 G57 10 75 60 60FHB II-A S M10 x 60/100 097206 ■ 10 £1,325.03 G57 10 75 60 100FHB II-A S M10 x 75/10 506884 ■ 10 £786.54 G57 10 90 75 10FHB II-A S M10 x 75/20 506885 ■ 10 £852.18 G57 10 90 75 20FHB II-A S M10 x 75/60 506886 ■ 10 £1,011.30 G57 10 90 75 60FHB II-A S M10 x 75/100 506887 ■ 10 £1,048.67 G57 10 90 75 100FHB II-A S M12 x 75/10 097257 ■ 10 £968.74 G57 12 90 75 10FHB II-A S M12 x 75/25 097268 ■ 10 £1,015.90 G57 12 90 75 25FHB II-A S M12 x 75/60 097274 ■ 10 £1,121.84 G57 12 90 75 60FHB II-A S M12 x 75/100 097275 ■ 10 £1,475.23 G57 12 90 75 100FHB II-A S M12 x 75/165 097280 ■ 10 £1,943.38 G57 12 90 75 165FHB II-A S M16 x 95/30 097281 ■ 10 £1,369.28 G57 16 110 95 30FHB II-A S M16 x 95/60 097286 ■ 10 £1,590.06 G57 16 110 95 60FHB II-A S M16 x 95/100 097295 ■ 10 £1,987.54 G57 16 110 95 100FHB II-A S M16 x 95/165 097296 ■ 10 £2,517.61 G57 16 110 95 165FHB II-A S M20 x 170/50 506917 ■ 10 £2,621.69 G57 25 190 170 50FHB II-A S M24 x 170/50 097297 ■ 10 £3,819.17 G57 25 190 170 50Use with FHB II P / FHB II PF / FIS HB 345 S
Highbond anchor FHB II-A S (short version)
19
For full product details please refer to the Main Catalogue Section
FHB II - AS A4
Items to order onlyzinc-plated
steelSales unit
£ Price per 100 pieces
Discount group
Drill hole diameter
Drill hole depth
Anchorage depth
Fixture thickness
Item Art.-No. ETA [pcs] [Ø mm] [mm] [mm] [mm]
Stainless Steel A4FHB II-A S M10 x 60/10 097630 ■ 10 £1,355.38 G57 10 75 60 10FHB II-A S M10 x 60/20 097631 ■ 10 £1,648.35 G57 10 75 60 20FHB II-A S M10 x 60/40 097632 ■ 10 £1,758.21 G57 10 75 60 40FHB II-A S M10 x 60/60 097633 ■ 10 £1,868.05 G57 10 75 60 60FHB II-A S M10 x 60/100 097634 ■ 10 £2,518.26 G57 10 75 60 100FHB II-A S M10 x 75/10 506888 ■ 10 £1,444.12 G57 10 90 75 10FHB II-A S M10 x 75/20 506889 ■ 10 £1,866.28 G57 10 90 75 20FHB II-A S M10 x 75/40 506890 ■ 10 £1,925.49 G57 10 90 75 40FHB II-A S M10 x 75/60 506891 ■ 10 £2,079.49 G57 10 90 75 60FHB II-A S M10 x 75/100 506892 ■ 10 £2,541.63 G57 10 90 75 100FHB II-A S M12 x 75/10 097635 ■ 10 £1,877.29 G57 12 90 75 10FHB II-A S M12 x 75/25 097636 ■ 10 £1,994.99 G57 12 90 75 25FHB II-A S M12 x 75/40 097637 ■ 10 £2,152.11 G57 12 90 75 40FHB II-A S M12 x 75/60 097638 ■ 10 £2,335.16 G57 12 90 75 60FHB II-A S M12 x 75/100 097639 ■ 10 £3,021.96 G57 12 90 75 100FHB II-A S M12 x 75/165 097640 ■ 10 £3,983.50 G57 12 90 75 165FHB II-A S M16 x 95/30 097641 ■ 10 £3,342.44 G57 16 110 95 30FHB II-A S M16 x 95/60 097642 ■ 10 £3,653.71 G57 16 110 95 60FHB II-A S M16 x 95/100 097643 ■ 10 £4,285.63 G57 16 110 95 100FHB II-A S M16 x 95/165 097644 ■ 10 £5,289.48 G57 16 110 95 165FHB II-A S M20 x 170/50 506919 ■ 4 £7,442.71 G57 25 190 170 50FHB II-A S M24 x 170/50 097645 ■ 4 £4,749.33 G57 25 190 170 50Highly corrosion resistant steel CFHB II-A S M10 x 60/10 097704 1) ■ 10 £4,966.91 G57 10 75 60 10FHB II-A S M10 x 60/20 097705 1) ■ 10 £5,160.73 G57 10 75 60 20FHB II-A S M12 x 75/25 097706 1) ■ 10 £8,602.50 G57 12 90 75 25FHB II-A S M12 x 75/40 097707 1) ■ 10 £9,030.03 G57 12 90 75 40FHB II-A S M16 x 95/30 097708 1) ■ 10 £16,151.71 G57 16 110 95 30FHB II-A S M16 x 95/60 097709 1) ■ 10 £17,411.14 G57 16 110 95 601) Prices and delivery time on request.ETA approved for use with resin FIS HB or capsule FHB II-P / FHB II-P
Highbond anchor FHB II-A S (short version)
CHEMICAL FIXINGS
20
FHB II - AL
Items to order onlyzinc-plated
steelSales unit
£ Price per 100 pieces
Discount group
Drill hole diameter
Drill hole depth
Anchorage depth
Fixture thickness
Item Art.-No. ETA [pcs] [Ø mm] [mm] [mm] [mm]
FHB II-A L M8 x 60/10 097032 ■ 10 £742.02 G57 10 75 60 10FHB II-A L M8 x 60/30 097033 ■ 10 £803.94 G57 10 75 60 30FHB II-A L M8 x 60/50 097034 ■ 10 £954.05 G57 10 75 60 50FHB II-A L M10 x 95/10 096907 ■ 10 £989.31 G57 12 110 95 10FHB II-A L M10 x 95/20 096940 ■ 10 £1,055.61 G57 12 110 95 20FHB II-A L M10 x 95/60 096941 ■ 10 £1,280.86 G57 12 110 95 60FHB II-A L M10 x 95/100 096942 ■ 10 £1,517.18 G57 12 110 95 100FHB II-A L M12 x 100/10 506893 ■ 10 £1,039.74 G57 14 115 100 10FHB II-A L M12 x 100/25 506894 ■ 10 £1,155.28 G57 14 115 100 25FHB II-A L M12 x 100/60 506895 ■ 10 £1,379.55 G57 14 115 100 60FHB II-A L M12 x 100/100 506896 ■ 10 £1,732.95 G57 14 115 100 100FHB II-A L M12 x 120/10 096943 ■ 10 £1,279.84 G57 14 135 120 10FHB II-A L M12 x 120/25 096944 ■ 10 £1,029.31 G57 14 135 120 25FHB II-A L M12 x 120/60 097014 ■ 10 £1,750.46 G57 14 135 120 60FHB II-A L M12 x 120/100 097031 ■ 10 £2,106.98 G57 14 135 120 100FHB II-A L M16 x 125/30 506903 ■ 10 £2,002.49 G57 18 140 125 30FHB II-A L M16 x 125/60 506904 ■ 10 £2,310.56 G57 18 140 125 60FHB II-A L M16 x 125/100 506905 ■ 10 £2,310.56 G57 18 140 125 100FHB II-A L M16 x 145/30 506911 ■ 10 £1,771.42 G57 18 160 145 30FHB II-A L M16 x 145/60 506912 ■ 10 £2,056.39 G57 18 160 145 60FHB II-A L M16 x 145/100 506913 ■ 10 £2,441.54 G57 18 160 145 100FHB II-A L M16 x 160/30 097035 ■ 10 £1,878.45 G57 18 175 160 30FHB II-A L M16 x 160/60 097038 ■ 10 £2,198.21 G57 18 175 160 60FHB II-A L M16 x 160/100 097070 ■ 10 £2,709.79 G57 18 175 160 100FHB II-A L M20 x 210/50 097071 ■ 10 £3,931.81 G57 25 235 210 50FHB II-A L M20 x 210/150 052370 ■ 10 £4,090.27 G57 25 235 210 150FHB II-A L M24 x 210/50 506920 ■ 10 £4,043.51 G57 25 235 210 50Stainless Steel A4FHB II-A L M8 x 60/10 097298 ■ 10 £1,268.33 G57 10 75 60 10FHB II-A L M8 x 60/30 097299 ■ 10 £1,350.73 G57 10 75 60 30FHB II-A L M8 x 60/50 097440 ■ 10 £1,552.22 G57 10 75 60 50FHB II-A L M10 x 95/10 0 97616 ■ 10 £1,946.05 G57 12 110 95 10FHB II-A L M10 x 95/20 097617 ■ 10 £2,028.39 G57 12 110 95 20FHB II-A L M10 x 95/40 097618 ■ 10 £2,156.61 G57 12 110 95 40FHB II-A L M10 x 95/60 097619 ■ 10 £2,335.16 G57 12 110 95 60FHB II-A L M10 x 95/100 097620 ■ 10 £3,067.76 G57 12 110 95 100FHB II-A L M12 x 100/10 506897 ■ 10 £1,963.94 G57 14 115 100 10FHB II-A L M12 x 100/25 506898 ■ 10 £2,118.03 G57 14 115 100 25FHB II-A L M12 x 100/40 506899 ■ 10 £2,310.56 G57 14 115 100 40FHB II-A L M12 x 100/60 506901 ■ 10 £2,695.71 G57 14 115 100 60FHB II-A L M12 x 100/100 506902 ■ 10 £3,850.98 G57 14 115 100 100FHB II-A L M12 x 120/10 097621 ■ 10 £2,742.71 G57 14 135 120 10FHB II-A L M12 x 120/25 097622 ■ 10 £3,351.28 G57 14 135 120 25FHB II-A L M12 x 120/40 097623 ■ 10 £3,635.42 G57 14 135 120 40FHB II-A L M12 x 120/60 097624 ■ 10 £3,855.35 G57 14 135 120 60FHB II-A L M12 x 120/100 097625 ■ 10 £4,620.07 G57 14 135 120 100FHB II-A L M16 x 125/30 506906 ■ 10 £4,121.22 G57 18 140 125 30FHB II-A L M16 x 125/60 506909 ■ 10 £4,621.12 G57 18 140 125 60FHB II-A L M16 x 125/100 506910 ■ 10 £4,043.51 G57 18 140 125 100ETA approved for use with resin FIS HB or capsules FHB II-P / FHB II-P
Highbond anchor FHB II-A L (long version)
Continued over page
CHEMICAL FIXINGS
21
For full product details please refer to the Main Catalogue Section
FHB II-P Resin capsule
Items to order onlySales unit
£ Price per 100 pieces
Discount group
Drill hole diameter
Drill hole depth
Anchorage depth
Fits
Item Art.-No. ETA [pcs] [Ø mm] [mm] [mm]
FHB II-P 8 x 60 096824 ■ 10 £333.83 G57 10 75 60 FHB II-A L M 8 x 60FHB II-P 10 x 60 096847 ■ 10 £351.34 G57 10 75 60 FHB II-S M 10 x 60FHB II-P 10 x 75 508016 ■ 10 £377.51 G57 10 90 75 FHB II-A S M 10 x 75FHB II-P 10 x 95 096843 ■ 10 £430.40 G57 12 110 95 FHB II-A L M 10 x 95FHB II-P 12 x 75 096848 ■ 10 £394.38 G57 12 90 75 FHB II-A S M 12 x 75FHB II-P 12 x 100 507922 ■ 10 £396.36 G57 14 115 100 FHB II-A L M 12 x 100FHB II-P 12 x 120 096844 ■ 10 £535.74 G57 14 135 120 FHB II-A L M 12 x 120FHB II-P 16 x 95 096849 ■ 10 £540.87 G57 16 110 95 FHB II-A S M 16 x 95FHB II-P 16 x 125 507923 ■ 10 £434.16 G57 18 145 125 FHB II-A L M 16 x 125FHB II-P 16 x 145 507924 ■ 10 £721.12 G57 18 165 145 FHB II-A L M 16 x 145FHB II-P 16 x 160 096845 ■ 10 £769.89 G57 18 175 160 FHB II-A L M 16 x 160FHB II-P 20 x 170 507925 ■ 4 £1,472.41 G57 25 190 170 FHB II-A S M 20 x 170FHB II-P 20 x 210 096846 ■ 4 £1,540.83 G57 25 235 210 FHB II-A L M 20 x 210FHB II-P 24 x 170 096851 ■ 4 £1,425.15 G57 25 190 170 FHB II-A S M 24 x 170FHB II-P 24 x 210 507926 ■ 4 £1,574.92 G57 25 235 210 FHB II-A L M 24 x 210
FHB II-P Resin capsule (standard)
FHB II - AL
Items to order onlystainless
steelArt.-No.
Sales unit
£ Price per 100 pieces
Discount group
Drill hole diameter
Drill hole depth
Anchorage depth
Fixture thickness
ETA [pcs] [Ø mm] [mm] [mm] [mm]Item A4
FHB II-A L M16 x 145/30 506914 ■ 10 £4,313.05 G57 18 160 145 30FHB II-A L M16 x 145/60 506915 ■ 10 £4,313.05 G57 18 160 145 60FHB II-A L M16 x 145/100 506916 ■ 10 £4,929.18 G57 18 160 145 100FHB II-A L M16 x 160/30 097626 ■ 10 £4,606.27 G57 18 175 160 30FHB II-A L M16 x 160/60 097627 ■ 10 £4,990.72 G57 18 175 160 60FHB II-A L M16 x 160/100 097628 ■ 10 £5,810.33 G57 18 175 160 100FHB II-A L M20 x 210/50 097629 ■ 4 £8,502.86 G57 25 235 210 50FHB II-A L M24 x 210/50 506921 ■ 10 £4,443.34 G57 25 235 210 50Highly corrosion resistant steel CFHB II-A L M8 x 60/10 097696 1) ■ 10 £4,543.60 G57 10 75 60 10FHB II-A L M8 x 60/30 097697 1) ■ 10 £4,925.60 G57 10 75 60 30FHB II-A L M10 x 95/10 097698 1) ■ 10 £5,822.79 G57 12 110 95 10FHB II-A L M10 x 95/20 097699 1) ■ 10 £5,975.61 G57 12 110 95 20FHB II-A L M12 x 120/25 097700 1) ■ 10 £10,099.32 G57 14 135 120 25FHB II-A L M12 x 120/40 097701 1) ■ 10 £10,461.99 G57 14 135 120 40FHB II-A L M16 x 160/30 097702 1) ■ 10 £21,802.05 G57 18 175 160 30FHB II-A L M20 x 210/50 097703 1) ■ 4 £38,460.45 G57 25 235 210 501) Prices and delivery time on request.ETA approved for use with resin FIS HB or capsules FHB II-P / FHB II-P
Highbond anchor FHB II-A L (long version)
CHEMICAL FIXINGS
22
FIS HL Injection metal anchor sleeve - 1m
Items to order onlySales unit £ Price
per pieceDiscount
groupDrill hole diameter
Total length
Fits
Item Art.-No. [pcs] [Ø mm] [mm]
FIS H 12 x 1000 L 050598 10 £8.11 G58 12 1000 Ø6 / M 6 - Ø8 / M 8FIS H 16 x 1000 L 050599 10 £9.37 G58 16 1000 Ø10/M10 / Ø12/M12FIS H 22 x 1000 L 045301 6 £13.11 G58 22 1000 Ø12/M12 - Ø16/M16FIS H 30 x 1000 L 000645 4 £26.64 G58 30 1000 Ø16/M16 - Ø22/M22
FHB II-P Resin capsule
Items to order onlySales unit
£ Price per 100 pieces
Discount group
Drill hole diameter
Drill hole depth
Anchorage depth
Fits
Item Art.-No. ETA [pcs] [Ø mm] [mm] [mm]
FHB II-PF 8 x 60 500542 ■ 10 £333.83 G57 10 75 60 FHB II-A L M 8 x 60FHB II-PF 10 x 60 500547 ■ 10 £351.34 G57 10 75 60 FHB II-S M 10 x 60FHB II-PF 10 X 75 507999 ■ 10 £377.50 G57 10 90 75 FHB II-A S M 10 x 75FHB II-PF 10 x 95 500543 ■ 10 £430.40 G57 12 110 95 FHB II-A L M 10 x 95FHB II-PF 12 x 75 500548 ■ 10 £394.38 G57 12 90 75 FHB II-A S M 12 x 75FHB II-PF 12 x 100 508000 ■ 10 £396.44 G57 14 115 100 FHB II-A L M 12 x 100FHB II-PF 12 x 120 500544 ■ 10 £535.74 G57 14 135 120 FHB II-A L M 12 x 120FHB II-PF 16 x 95 500549 ■ 10 £540.87 G57 16 110 95 FHB II-A S M 16 x 95FHB II-PF 16 x 125 508001 ■ 10 £434.16 G57 18 145 125 FHB II-A L M 16 x 125FHB II-PF 16 x 145 508002 ■ 10 £721.12 G57 18 165 145 FHB II-A L M 16 x 145FHB II-PF 16 x 160 500545 ■ 10 £769.89 G57 18 175 160 FHB II-A L M 16 x 160FHB II-PF 20 x 170 508003 ■ 4 £832.36 G57 25 190 170 FHB II-A S M 20 x 170FHB II-PF 20 x 210 500546 ■ 4 £1,103.82 G57 25 235 210 FHB II-A L M 20 x 210FHB II-PF 24 x 170 500550 ■ 4 £998.18 G57 25 190 170 FHB II-A S M 24 x 170FHB II-PF 24 x 210 508004 ■ 4 £1,247.79 G57 25 235 210 FHB II-A L M 24 x 210
FHB II-PF Resin capsule (fast curing)
FIS H K Injection anchor sleeve
Items to order only Sales unit £ Price
per 100 piecesDiscount
groupDrill hole diameter
Min. drill hole depth
Effect. anchoring
depth
Fits
Item Art.-No. ETA [pcs] [Ø mm] [mm] [mm]
FIS H 12 x 50 K 041900 ■ 50 £60.58 G58 12 60 50 FIS A M6-M8FIS H 12 x 85 K 041901 ■ 50 £78.10 G58 12 95 85 FIS A M6-M8FIS H 16 x 85 K 041902 ■ 50 £93.04 G58 16 95 85 FIS A M8-M10, FIS E M6-M8FIS H 16 x 130 K 041903 ■ 20 £105.24 G58 16 140 130 FIS A M8-M10FIS H 20 x 85 K 041904 ■ 20 £167.57 G58 20 95 85 FIS A M12-M16, FIS E M10-M12FIS H 20 x 130 K 046703 ■ 20 £249.85 G58 20 140 130 FIS A M12-M16FIS H 20 x 200 K 046704 ■ 20 £297.62 G58 20 210 200 FIS A M12-M16
ETA when used with FIS V, FIS VS & FIS VW. Can be used with FIS VT or FIS P but has no approval
CHEMICAL FIXINGS
23
For full product details please refer to the Main Catalogue Section
FIS E Steel injection anchor socket
Items to order onlyzinc
plated steel
Sales unit £ Price per 100 pieces
Discount group
Drill hole diameter
Effect. anchoring
depth
Min. bolt penetration
Max. bolt penetration
Suitable injection anchor sleeve
Item Art.-No. [pcs] [Ø mm] [mm] [mm] [mm]
FIS E 11 x 85 M6 043631 10 £291.58 G58 16, 20 85 6 60 FIS H 16 x 85 K FIS H 20 x 85 KFIS E 11 x 85 M8 043632 10 £311.90 G58 16, 20 85 8 60 FIS H 16 x 85 K FIS H 20 x 85 KFIS E 15 x 85 M10 043633 10 £382.91 G58 20 85 10 60 FIS H 20 x 85 K, FIS E 15 x 85 M12 043634 10 £445.36 G58 20 85 12 60 FIS H 20 x 85 K
Injection anchor sleeve with net FIS H N
FIS H N Injection anchor sleeve with net
Sales unit £ Price per 100 pieces
Discount group
Drill hole diameter
Min. drill hole depth
Min. anchorage depth anchor
Fits
Item Art.-No. [pcs] [Ø mm] [mm] [mm]
FIS H 16 x 85 N 050470 20 £311.21 G58 16 95 90 Ø8/M8FIS H 18 x 85 N 050472 20 £328.68 G58 18 95 90 Ø10/M10FIS H 20 x 85 N 050474 20 £328.60 G58 20 95 90 Ø12/M12
Resin anchor set for aircrete
Sales unit £ Price 1*/100 pieces
Discount group
Fits
Item Art.-No. [pcs]
Cone drill PBB 090634 1 £4,965.93* G59 FIS A / RGM / FT R M8 - M12 threaded rods/ FIS E anchor sleeveCentring sleeve PBZ 090671 10 £65.33 G59 FIS A / RGM / FT R M8 - M12 threaded rods/ FIS E anchor sleeve
Cone drill PBB Centring sleeve PBZ
Drill hole cleaning brushes
Items to order onlyArt.-No.
Sales unit
£ Price per 100 pieces
Discount group
Brush diameter
Item [pcs] [Ø mm]
BS Ø 8 078177 1 £24.67 G50BS Ø 10 078178 1 £25.14 G50 11BS Ø 12 078179 1 £25.45 G50 13BS Ø 14 078180 1 £26.30 G50 16BS Ø 18 078181 1 £27.08 G50 20BS Ø 24 078182 1 £28.71 G50 26BS Ø 25 097806 1 £27.85 G50 27BS Ø 28 078183 1 £30.34 G50 30BS Ø 35 078184 1 £31.96 G50 40FIS brush extension 40cm 508791 1 £18.40 G50 —FIS brush Ø 14-20 mm 48980 1 £11.32 G50 —FIS brush Ø 20-30mm 48981 1 £21.49 G50 —
Metal cleaning brush BS for concrete Cleaning brush FIS
CHEMICAL FIXINGS
24
Metal Brush M8 thread
Items to order onlySales unit £ Price
per 100 piecesDiscount
groupColour Length
Item Art.-No. [pcs] [mm]
Brush for drill-Ø 20 mm 001494 1 £28.10 G50 green -Brush for drill-Ø 35 mm 090071 1 £50.47 G50 brown -FIS brush extension 508791 1 £18.40 G50 - 400
Cleaning brush with thread M
Drill hole cleaning / Accessories
Items to order onlyArt.-No.
Sales unit
£ Price per 100 pieces
Discount group
Brush diameter
For drill diameter
Item [pcs] [Ø mm] [Ø mm]
Compressed-air cleaning gun ABP 059456 1 £263.30 G50 FHB II-A M20 - M24 -ABG hole cleaning pump 089300 1 £45.88 G50 — —Accessories:Centring wedge (overhead) 093076 10 £38.46 G57 Use for overhead Installations RA-SDS (setting resin studs) 062420 1 £61.30 G57 RGM Sizes M8-M20 / FHB II Sizes M10-M20
Compressed air gun Hole cleaning pump ABG Over head Centring wedge Machine setting tool RA-SDS
CHEMICAL FIXINGS
FRA Rebar
Items to order onlyCombination of
materialsSales unit £ Price
per pieceDiscount
groupDrill holediameter
Total length
Max. fixing thickness
Art.-No. ETA [pcs] [Ø mm] [mm] [mm]Item
FRA 12/900 M12-60 505529 ■ 8 £44.25 G51 16 975 60FRA 20/1400 M20-60 505534 ■ 4 £104.57 G51 25 1485 60
FIS-Rebar case 505942 1 £1,376.73
G51
8x cleaning brush, 5x extension for brush 40cm,1x SDS chuck with internal thread M8, 8x Injection adapter, 1x cleaning hose, 1x brush control template, 2x cleaning nozzle for drill dia 12-15, 2x cleaning nozzle for drill dia 16-19, 2x cleaning nozzle for drill dia 20-25, 2x cleaning nozzle for drill dia 30 -35, 1x marker tape, 1x installation instructions, 2x flat spanner SW7
Reinforcement bar welded with the threaded part made of stainless steel A4.ETA when used with FIS V / FIS VW
Rebar anchor FRA
Setting Tools
Machine setting tool RA-SDSAdapter SDS plus 1/2“ VK
Adapter SDS max 1/2“ VKAdapter SK SW 8 1/2“ VK
Adapter SDS max 3/4“ VK
Items to order only Sales unit
£ Price per 100 pieces
Discount group
fits
Item Art.-No. [pcs]RA-SDS 062420 1 £61.30 G57 Adapter suitable for set screwSK SW 8 1/2 001536 1 £34.84 G50 Adapter suitable for threaded rods M8 - M22SDS plus 1/2 001537 1 £62.78 G90 Adapter suitable for threaded rods M8 - M16SDS max 1/2 001538 1 £117.02 G90 Adapter suitable for threaded rods M16 - M20SDS max 3/4 001539 1 £126.41 G90 Adapter suitable for threaded rods M20 - M30
25
For full product details please refer to the Main Catalogue Section
STEEL FIXINGS
FAZ II Through bolt
Items to order onlyzinc-plated
steel
Appr
oval Sales
unit£ Price
per 100 piecesDiscount
groupDrill hole diameter
Min. drillhole depth for
through fixings
Anchor length
Max. fixture thickness
Thread Width across nut
Item Art.-No. ETA ICC [pcs] [Ø mm] [mm] [mm] [mm] [mm] [mm]
FAZ II 8/10 094871 ■ ▲ 50 £184.06 G35 8 65 75 10 M 8 x 77 13FAZ II 8/30 094877 ■ ▲ 50 £228.01 G35 8 85 95 30 M 8 x 97 13FAZ II 8/50 094878 ■ ▲ 50 £232.77 G35 8 105 115 50 M 8 x 117 13FAZ II 8/100 094879 ■ ▲ 25 £291.43 G35 8 155 165 100 M 8 x 167 13FAZ II 8/160 503251 ■ ▲ 20 £610.02 G35 8 215 225 160 M 8 x 225 13FAZ II 10/10 094981 ■ ▲ 50 £199.44 G35 10 85 95 10 M 10 x 95 17FAZ II 10/10 K 522108 ■ ▲ 50 £233.44 G35 10 65 75 10 M 10 x 75 17FAZ II 10/20 094982 ■ ▲ 25 £242.76 G35 10 95 105 20 M 10 x105 17FAZ II 10/20 K 522110 ■ ▲ 25 £279.85 G35 10 75 85 20 M 10 x 85 17FAZ II 10/30 094983 ■ ▲ 25 £297.13 G35 10 105 115 30 M 10 x115 17FAZ II 10/50 094984 ■ ▲ 20 £302.74 G35 10 125 135 50 M 10 x135 17FAZ II 10/80 094985 ■ ▲ 20 £323.76 G35 10 155 165 80 M 10 x165 17FAZ II 10/100 094986 ■ ▲ 20 £355.45 G35 10 175 185 100 M 10 x186 17FAZ II 10/160 503252 ■ ▲ 20 £629.47 G35 10 235 245 160 M 10 x 245 17FAZ II 12/10 095419 ■ ▲ 20 £297.47 G35 12 100 110 10 M 12 x 110 19FAZ II 12/10 K 522118 ■ ▲ 20 £302.29 G35 12 80 90 10 M 12 x 90 19FAZ II 12/20 095420 ■ ▲ 20 £338.79 G35 12 110 120 20 M 12 x 120 19FAZ II 12/20 K 522119 ■ ▲ 20 £382.49 G35 12 90 100 20 M 12 x 100 19FAZ II 12/30 095421 ■ ▲ 20 £460.04 G35 12 120 130 30 M 12 x 130 19FAZ II 12/50 095446 ■ ▲ 20 £560.20 G35 12 140 150 50 M 12 x 150 19FAZ II 12/80 095454 ■ ▲ 20 £580.57 G35 12 170 180 80 M 12 x 180 19FAZ II 12/100 095470 ■ ▲ 20 £642.49 G35 12 190 200 100 M 12 x 200 19FAZ II 12/160 503253 ■ ▲ 10 £751.78 G35 12 250 260 160 M 12 x 260 19FAZ II 12/200 095605 ■ ▲ 10 £966.51 G35 12 290 300 200 M 12 x 300 19FAZ II 16/25 095836 ■ ▲ 20 £840.37 G35 16 135 148 25 M 16 x 150 24FAZ II 16/50 095864 ■ ▲ 20 £910.32 G35 16 160 173 50 M 16 x 175 24FAZ II 16/100 095865 ■ ▲ 10 £1,377.72 G35 16 210 223 100 M 16 x 225 24FAZ II 16/160 503254 ■ ▲ 10 £1,276.28 G35 16 270 283 160 M 16 x 283 24FAZ II 16/200 095967 ■ ▲ 10 £1,686.94 G35 16 310 323 200 M 16 x 325 24FAZ II 16/250 095968 ■ ▲ 10 £1,036.47 G35 16 360 373 250 M 16 x 373 24FAZ II 20/30 046632 ■ ▲ 5 £1,430.69 G35 20 155 172 30 M 20 x 172 30FAZ II 20/60 046633 ■ ▲ 5 £1,763.55 G35 20 185 202 60 M 20 x 202 30FAZ II 20/160 503255 ■ ▲ 5 £2,785.75 G35 20 285 302 160 M 20 x 302 30FAZ II 24/30 046635 ■ ▲ 5 £3,750.33 G35 24 185 205 30 M 24 x 204 36FAZ II 24/60 046636 ■ ▲ 5 £4,515.28 G35 24 215 235 60 M 24 x 234 36Stainless Steel A4FAZ II 8/10 501396 ■ ▲ 50 £596.07 G35 8 65 75 10 M 8 x 21 13FAZ II 8/30 501399 ■ ▲ 50 £660.90 G35 8 85 95 30 M 8 x 41 13FAZ II 8/50 501401 ■ ▲ 50 £858.04 G35 8 105 115 50 M 8 x 61 13FAZ II 10/10 501403 ■ ▲ 50 £694.57 G35 10 85 95 10 M 10 x 24 17FAZ II 10/20 501406 ■ ▲ 50 £779.25 G35 10 95 105 20 M 10 x 34 17FAZ II 10/30 501407 ■ ▲ 50 £823.17 G35 10 105 115 30 M 10 x 44 17FAZ II 10/50 501409 ■ ▲ 20 £1,245.82 G35 10 125 135 50 M 10 x 64 17FAZ II 10/70 501410 ■ ▲ 20 £1,179.86 G35 10 145 155 70 M 10 x 84 17FAZ II 10/100 501411 ■ ▲ 20 £1,373.23 G35 10 175 185 100 M 10 x 100 17FAZ II 10/160 501412 ■ ▲ 20 £2,126.85 G35 10 235 245 160 M 10 x 100 17FAZ II 12/10 501413 ■ ▲ 20 £955.57 G35 12 100 110 10 M 12 x 27 19FAZ II 12/20 501415 ■ ▲ 20 £957.86 G35 12 110 120 20 M 12 x 37 19FAZ II 12/30 501416 ■ ▲ 20 £1,048.12 G35 12 120 130 30 M 12 x 47 19FAZ II 12/50 501419 ■ ▲ 20 £1,367.25 G35 12 140 150 50 M 12 x 67 19FAZ II 16/25 501423 ■ ▲ 20 £2,929.76 G35 16 135 148 25 M 16 x 47 24
FAZ II K short version
FAZ II - K (Shorter Version)
Bolt anchor FAZ II
Continued
26
FBN II Through bolt
Items to order only
zinc-plated steel
Art.-No.gvz
Sales unit
£ Price per100 pieces
Discount group
Drill hole diameter
Min. Drillhole depth for
through fixings
Anchor length
Max. usable length
hef,standard/hef,reduced
Thread Width across
nut
Item ETA [pcs] [Ø mm] [mm] [mm] [mm] [mm] [mm]
FBN II 6x5 (6/5) 505526 1) 2) ■ 100 £75.21 G42 6 45 50 5/- M 6 x 12 10FBN II 6x55 (6/10) 505527 1) 2) ■ 100 £77.63 G42 6 50 55 10/ - M 6 x 17 10FBN II 6x75 (6/30) 505528 1) 2) ■ 100 £89.60 G42 6 70 75 30/- M 6 x 35 10FBN II 8x55 K (8/5) 040806 ■ 50 £74.05 G42 8 51 56 -/5 M 8 x 24 13FBN II 8x65 (8/65) 040662 ■ 50 £75.22 G42 8 61 66 5/15 M 8 x 34 13FBN II 8x60 K (8/10) 040807 ■ 50 £78.58 G42 8 56 61 -/10 M 8 x 29 13FBN II 8x70 (8/10) 040664 ■ 50 £78.90 G42 8 66 71 10/20 M 8 x 39 13FBN II 8x80 (8/20) 040669 ■ 50 £81.14 G42 8 76 81 20/30 M 8 x 49 13FBN II 8x90 (8/20) 040700 ■ 50 £98.49 G42 8 86 91 30/40 M 8 x 59 13FBN II 8x110 (8/50) 040771 ■ 50 £104.79 G42 8 106 111 50/60 M 8 x 79 13FBN II 8x130 (8/70) 040777 ■ 20 £115.12 G42 8 126 131 70/80 M 8 x 99 13FBN II 10x70 K (10/5) 040946 ■ 50 £91.16 G42 10 63 71 -/5 M 10 x 31 17FBN II 10x75 K (10/10) 040947 ■ 50 £107.48 G42 10 68 76 -/10 M 10 x 36 17FBN II 8x160 (8/100) 040783 ■ 20 £145.17 G42 8 156 161 100/110 M 8 x 129 131) Use restricted to anchoring of structural components which are statically indeterminate. 2) Nut and washer not pre-assembled/supplied loose.
Items to order only
stainless steelA4 Approval
Sales unit
£ Price per100 pieces
Discount group
Drill hole diameter
Min. drill hole depth for through
fixings
Anchor length
Max. fixture thickness
Thread Width across
nut
Item Art.-No. ETA ICC [pcs] [Ø mm] [mm] [mm] [mm] [mm] [mm]
FAZ II 16/50 501424 ■ ▲ 20 £3,399.00 G35 16 160 173 50 M 16 x 72 24FAZ II 16/100 501425 ■ ▲ 10 £3,749.13 G35 16 210 223 100 M 16 x 100 24FAZ II 20/30 501426 ■ ▲ 4 £5,823.03 G35 20 155 172 30 M 20 x 54 30FAZ II 20/60 503183 ■ ▲ 4 £6,838.76 G35 20 185 202 60 M 20 x 84 30FAZ II 24/30 501427 ■ ▲ 4 £9,120.22 G35 24 185 205 30 M 24 x 58 36FAZ II 24/60 503184 ■ ▲ 4 £10,556.37 G35 24 215 235 60 M 24 x 88 36Highly corrosion resistant steel CFAZ II 8/30 501429 ■ ▲ 50 £2,441.15 G35 8 85 95 30 M 8 x 41 13FAZ II 10/10 501430 ■ ▲ 10 £4,019.96 G35 10 85 95 10 M 10 x 24 17FAZ II 12/10 503186 ■ ▲ 10 £4,385.21 G35 12 100 110 10 M 12 x 27 19FAZ II 12/30 501431 ■ ▲ 20 £5,310.76 G35 12 120 130 30 M 12 x 47 19FAZ II 16/25 501432 ■ ▲ 20 £9,544.01 G35 16 135 148 25 M 16 x 47 24FAZ II 16/50 503187 ■ ▲ 10 £10,022.26 G35 16 160 173 50 M 16 x 72 24
FAZ II GS 8/10/12/16 with large washers also available, please ask for details
Continued
Bolt anchor FBN II
FABS Setting tool
Item to order onlySales unit £ Price
per 100 piecesDiscount
groupFits anchor
Item Art.-No. [pcs]
FABS 077937 1 £45.44 G94 FAZ II, FBN II, EXA for diameter from M6 - M12
fischer Through bolt SDS setting tool FABS
STEEL FIXINGS
FAZ II Through bolt
Bolt anchor FAZ II
FBN II - K (Shorter Version)
27
For full product details please refer to the Main Catalogue Section
FBN II Through bolt
Items to order onlyzinc-plated
steelSales unit
£ Price per100 pieces
Discount group
Drill hole diameter
Min. Drillhole depth for
through fixings
Anchor length
Max. usable length hef,standard/hef,reduced
Thread Width across
nut
Item Art.-No. ETA [pcs] [Ø mm] [mm] [mm] [mm] [mm] [mm]
FBN II 10x85 (10/10) 040827 ■ 50 £114.36 G42 10 78 86 10/20 M 10 x 46 17FBN II 10x95 (10/20) 040851 ■ 50 £110.60 G42 10 88 96 20/30 M 10 x 56 17FBN II 10x105 (10/30) 040854 ■ 50 £112.08 G42 10 98 106 30/40 M 10 x 66 17FBN II 10x125 (10/50) 040855 ■ 20 £130.51 G42 10 118 126 50/60 M 10 x 86 17FBN II 10x145 (10/70) 040931 ■ 20 £159.17 G42 10 138 146 70/80 M 10 x 106 17FBN II 10x175 (10/100) 040943 ■ 20 £182.42 G42 10 168 176 100/110 M 10 x 136 17FBN II 10x215 (10/140) 040944 ■ 20 £238.10 G42 10 208 216 140/150 M10 x 176 17FBN II 10x235 (10/160) 040945 ■ 20 £264.12 G42 10 228 236 160/170 M10 x 196 17FBN II 12x85 K (12/5) 045272 ■ 20 £148.69 G42 12 75 86 -/5 M12 x 39 19FBN II 12x90 K (12/5) 045273 ■ 20 £162.60 G42 12 80 91 -/10 M12 x 44 19FBN II 12x105 (12/10) 040950 ■ 20 £164.16 G42 12 95 106 10/25 M12 x 59 19FBN II 12x110 K (12/30) 045274 ■ 20 £183.51 G42 12 100 111 -/30 M12 x 64 19FBN II 12x115 (12/20) 044558 ■ 20 £156.73 G42 12 105 116 20/35 M12 x 69 19FBN II 12x125 (12/30) 045263 ■ 20 £171.32 G42 12 115 126 30/45 M12 x 79 19FBN II 12x145 (12/50) 045264 ■ 20 £166.94 G42 12 135 146 50/65 M12 x 99 19FBN II 12x175 (12/80) 045265 ■ 20 £250.13 G42 12 165 176 80/95 M12 x 129 19FBN II 12x195 (12/100) 045266 ■ 20 £303.44 G42 12 185 196 100/115 M12 x 149 19FBN II 12x215 (12/120) 045267 ■ 20 £333.61 G42 12 205 216 120/135 M12 x 169 19FBN II 12x235 (12/140) 045268 ■ 20 £364.40 G42 12 225 236 140/155 M12 x 189 19FBN II 12x255 (12/160) 045269 ■ 20 £395.35 G42 12 245 256 160/175 M12 x 189 19FBN II 16x120 K (16/15) 045571 ■ 20 £254.92 G42 16 104 120 15/- M16 x 64 24FBN II 16x130 K (16/25) 045572 ■ 20 £280.06 G42 16 114 130 25/- M16 x 74 24FBN II 16x145 (16/25) 045564 ■ 10 £251.52 G42 16 129 145 25/40 M16 x 89 20FBN II 16x170 (16/50) 045565 ■ 10 £416.53 G42 16 154 170 50/65 M16 x 114 20FBN II 16x200 (16/80) 045566 ■ 10 £516.63 G42 16 184 200 80/95 M16 x 144 20FBN II 16x220 (16/100) 045567 ■ 10 £621.03 G42 16 204 220 100/115 M16 x 164 20FBN II 16x260 (16/140) 045568 ■ 10 £632.85 G42 16 244 260 140/155 M16 x 184 24FBN II 16x280 (16/160) 045569 ■ 10 £681.49 G42 16 264 280 160/175 M16 x 184 24FBN II 16x 320 (16/200) 045570 ■ 10 £856.02 G42 16 304 320 200/215 M16 x 100 24FBN II 20x 10 K (20/10) 045577 ■ 10 £838.75 G42 20 120 142 -/10 M20 x 50 30FBN II 20x185 (20/30) 045573 ■ 10 £755.63 G42 20 165 184 30/55 M20 x 90 30FBN II 20x215 (20/60) 045574 ■ 10 £837.33 G42 20 195 214 60/85 M20 x 90 30FBN II 20x235 (20/80) 045575 ■ 10 £1,056.88 G42 20 215 234 80/105 M20 x 90 30FBN II 20x275 (20/120) 045576 ■ 10 £1,158.71 G42 20 255 274 120/145 M20 x 90 30Stainless Steel A4FBN II 6x55 (6/10) 505532 1) 2) ■ 100 £178.36 G48 6 50 55 10/ - M 6 x 17 10FBN II 6x75 (6/30) 505535 1) 2) ■ 100 £197.12 G48 6 70 75 30/- M 6 x 35 10FBN II 8x55 K (8/5) 508007 ■ 50 £202.51 G48 8 51 56 -/5 M 8 x 24 13FBN II 8x70 (8/10) 507555 ■ 50 £217.06 G48 8 66 71 10/20 M 8 x 39 13FBN II 8x90 (8/20) 507556 ■ 50 £247.90 G48 8 86 91 30/40 M 8 x 59 13FBN II 8x110 (8/50) 507557 ■ 50 £296.76 G48 8 106 111 50/60 M 8 x 79 13FBN II 10x70 K (10/5) 508010 ■ 50 £285.02 G48 10 63 71 -/5 M 10 x 31 17FBN II 10x85 (10/10) 507558 ■ 50 £289.41 G48 10 78 86 10/20 M 10 x 46 17FBN II 10x95 (10/20) 507559 ■ 50 £307.70 G48 10 88 96 20/30 M 10 x 56 17FBN II 10x105 (10/30) 507560 ■ 50 £338.81 G48 10 98 106 30/40 M 10 x 66 17FBN II 10x125 (10/50) 507561 ■ 20 £362.78 G48 10 118 126 50/60 M 10 x 86 17FBN II 10x175 (10/100) 507562 ■ 20 £617.87 G48 10 168 176 100/110 M 10 x 136 17FBN II 12x85 K (12/5) 508011 ■ 20 £436.64 G48 12 75 86 -/5 M 12 x 39 19FBN II 12x105 (12/10) 507563 ■ 20 £441.15 G48 12 95 106 10/25 M 12 x 59 19FBN II 12x115 (12/20) 507564 ■ 20 £453.47 G48 12 105 116 20/35 M 12 x 69 19FBN II 12x125 (12/30) 507565 ■ 20 £468.21 G48 12 115 126 30/45 M 12 x 79 19FBN II 12x145 (12/50) 507566 ■ 20 £526.03 G48 12 135 146 50/65 M 12 x 99 19FBN II 12x195 (12/100) 507567 ■ 20 £696.13 G48 12 185 196 100/115 M 12 x 149 19FBN II 16x120 K (16/15) 508745 ■ 10 £911.53 G48 16 104 120 -/15 M 12 x 149 24FBN II 16x130 (16/10) 507568 ■ 10 £867.02 G48 16 114 130 10/25 M 16 x 74 241) Use restricted to anchoring of structural components which are statically indeterminate. 2) Nut and washer not pre-assembled/supplied loose.
STEEL FIXINGS
28
FBN II Through bolt
Items to order onlyHot dipped galvanised
Steel
Sales unit
£ Price per 100
pieces
Discount group
Drill hole diameter
Min. Drillhole depth for
through fixings
Anchor length
Max. usable length hef,standard/hef,reduced
Thread Width across
nutItem Art.-No. ETA [pcs] [Ø mm] [mm] [mm] [mm] [mm] [mm]Hot dipped galvanised steelFBN II 8x55 K (8/55) 508012 ■ 50 £138.14 G48 8 51 56 -/5 M 8 x 24 13FBN II 8x70 (8/10) 507575 ■ 50 £142.28 G48 8 66 71 10/20 M 8 x 39 13FBN II 8x90 (8/20) 507576 ■ 50 £154.09 G48 8 86 91 30/40 M 8 x 59 13FBN II 8x110 (8/50) 507577 ■ 50 £186.85 G48 8 106 111 50/60 M 8 x 79 13FBN II 8x130 (8/70 507578 ■ 50 £197.62 G48 8 126 131 70/80 M 8 x 99 13FBN II 10x70 K (10/5) 508013 ■ 50 £223.60 G48 10 63 71 -/5 M 10 x 31 17FBN II 10x85 (10/10) 507579 ■ 50 £226.48 G48 10 78 86 10/20 M 10 x 46 17FBN II 10x105 (10/30) 507580 ■ 50 £231.70 G48 10 98 106 30/40 M 10 x 66 17FBN II 10x125 (10/50) 507582 ■ 20 £248.79 G48 10 118 126 50/60 M 10 x 86 17FBN II 10x175 (10/100) 507583 ■ 20 £293.92 G48 10 168 176 100/110 M 10 x 136 17FBN II 12x90 K (12/5) 508014 ■ 20 £271.93 G48 12 75 86 -/5 M 12 x 39 19FBN II 12x105 (12/10) 507589 ■ 20 £275.06 G48 12 95 106 10/25 M 12 x 59 19FBN II 12x125 (12x30) 507591 ■ 20 £328.00 G48 12 115 126 30/45 M 12 x 79 19FBN II 12x145 (12/50) 507592 ■ 20 £366.92 G48 12 135 146 50/65 M 12 x 99 19FBN II 12x195 (12/100) 507596 ■ 20 £454.20 G48 12 185 196 100/115 M 12 x 149 19FBN II 16 x 120 K(16/15) 507597 ■ 10 £393.60 G48 16 104 120 15/- M 16 x 64 24FBN II 16 x145 (16/25) 507598 10 £421.59 G48 16 145 129 25/40 M 16 x 89 24FBN II 16x170 (16/50) 507553 10 £519.18 G48 16 170 154 50/60 M 16 x 105 24FBN II 16x200 (16/100) 507554 10 £678.19 G48 16 200 204 100/115 M 16 x 165 24FBN II 20x185 (20/30) 508015 10 £1,107.52 G48 20 185 165 30/55 M 20 x 90 30
Bolt anchor FBN II
STEEL FIXINGS
FBN II - K (Shorter Version)
FXA Through bolt
zinc-plated steel
Appr
oval
Sales unit
£ Price per 100
pieces
Discount group
Drill hole diameter
Min drill hole depth in the
concrete (mm)
Anchor length
Max. usable length
Width across
nuth
2l SW
Item Art.-No. ETA [pcs] [mm] [mm] [mm] [mm] [mm]
FXA 8 x 66 523129 ■ 50 £70.00 G40 8 56 66 5 13FXA 8 x 71 523131 ■ 50 £71.00 G40 8 56 71 10 13FXA 8 x 91 523132 ■ 50 £75.20 G40 8 56 91 30 13FXA 10 x 86 523133 ■ 50 £93.50 G40 10 68 86 10 17FXA 10 x 95 523134 ■ 50 £98.50 G40 10 68 95 20 17FXA 10 x 126 523135 ■ 20 £113.50 G40 10 68 126 50 17FXA 10 x 176 523136 ■ 20 £163.50 G40 10 68 176 100 17FXA 12 x 106 523137 ■ 20 £129.50 G40 12 85 106 10 19FXA 12 x 116 523138 ■ 20 £154.50 G40 12 85 116 20 19FXA 12 x 126 523139 ■ 20 £158.00 G40 12 85 126 30 19FXA 12 x 146 523141 ■ 20 £162.50 G40 12 85 146 50 19FXA 12 x 196 523142 ■ 20 £222.50 G40 12 85 196 100 19FXA 16 x 145 523143 ■ 10 £332.00 G40 16 104 145 25 24FXA 16 x 170 523144 ■ 10 £375.60 G40 16 104 170 50 24FXA 16 x 220 523145 ■ 10 £434.80 G40 16 104 220 100 24
ETA - 13/0772ETAG 001-2
29
For full product details please refer to the Main Catalogue Section
FH II - S
Items to order onlyzinc-plated
steel ApprovalSales unit
£ Price100 pieces
Discount group
Drill hole diameter
Min. drillhole depth for
through fixings
Anchor length
Max. fixture thickness
Thread Width across nut
Item Art.-No. ETA ICC [pcs] [mm] [mm] [mm] [mm] [mm]
FH II 10/10 S 503133 ■ — 50 £224.22 G33 10 65 70 10 M 6 10
FH II 10/25 S 503134 ■ — 50 £279.39 G33 10 80 85 25 M 6 10
FH II 10/50 S 503135 ■ — 50 £308.86 G33 10 105 110 50 M 6 10
FH II 12/10 S 044884 ■ ▲ 50 £336.99 G33 12 90 90 10 M 8 13
FH II 12/25 S 044885 ■ ▲ 50 £394.65 G33 12 105 105 25 M 8 13
FH II 12/50 S 044886 ■ ▲ 25 £448.40 G33 12 130 130 50 M 8 13
FH II 15/10 S 044887 ■ ▲ 25 £489.00 G33 15 100 106 10 M 10 17
FH II 15/25 S 044888 ■ ▲ 25 £497.91 G33 15 115 121 25 M 10 17
FH II 15/50 S 044889 ■ ▲ 25 £523.23 G33 15 140 146 50 M 10 17
FH II 18/10 S 046847 ■ ▲ 20 £766.08 G33 18 115 118 10 M 12 19
FH II 18/25 S 044894 ■ ▲ 20 £819.79 G33 18 130 132 25 M 12 19
FH II 18/50 S 044896 ■ ▲ 20 £927.16 G33 18 155 157 50 M 12 19
FH II 24/25 S 044898 ■ ▲ 10 £1,884.03 G33 24 150 160 25 M 16 24
FH II 24/50 S 044900 ■ ▲ 10 £2,242.90 G33 24 175 185 50 M 16 24
FH II 28/30 S 044901 ■ ▲ 4 £2,799.50 G33 28 185 192 30 M 20 30
FH II 28/60 S 044902 ■ ▲ 4 £3,340.59 G33 28 215 222 60 M 20 30
FH II 32/30 S 044903 ■ ▲ 4 £4,295.35 G33 32 210 215 30 M 24 36
FH II 32/60 S 044904 ■ ▲ 4 £5,164.87 G33 32 240 245 60 M 24 36
Stainless Steel A4
FH II 10/10 S 510923 ■ — 10 £1,234.18 G33 65 69 10 M 6 10 50
FH II 10/25 S 510924 ■ — 10 £1,645.44 G33 80 84 25 M 6 10 50
FH II 12/10 S 510925 ■ — 12 £1,959.87 G33 90 90 10 M 8 13 50
FH II 12/25 S 510926 ■ — 12 £1,717.96 G33 105 105 25 M 8 13 20
FH II 15/10 S 510927 ■ — 15 £2,328.64 G33 100 107 10 M 10 17 50
FH II 15/25 S 510928 ■ — 15 £2,861.66 G33 115 122 25 M 10 17 20
FH II 18/25 S 510929 ■ — 18 £3,441.41 G33 130 133 25 M 12 19 10
FH II 24/25 S 502711 ■ — 24 £4,289.96 G33 150 160 25 M 16 24 8
High performance anchor FH II-S - with hexagonal head
Torque Wrenches
Items to order onlyzinc-plated
steelSales unit £ Price
per 100 piecesDiscount
groupwidth
across nuttorque suitable for
Type Art.-No. [pcs] [mm] [Nm]
FTW 8-54 503324 1 £280.00 G96 - 8-54 hex. head fixingsFTW 50-230 503325 1 £349.72 G96 - 50-230 hex. head fixingsDeep drive socketFDDP 10 503326 1 £22.62 G96 10 A/F - M6FDDP 13 503327 1 £22.62 G96 13 A/F - M8FDDP 17 503328 1 £24.40 G96 17 A/F - M10FDDP 19 503329 1 £24.40 G96 19 A/F - M12For further detailed information on this product range please contact our Technical Team of advisors on 01491 827 920
Torque wrench ½“ FTW8-54 Torque wrench ½“ drive FTW 50-230 Deep drive socket FDDP 1/2“
STEEL FIXINGS
30
FH II - SK
Items to order only
Zinc-plated steel
Approval
Sales unit
£ Price100 pieces
Discount group
Drill hole diameter
Min. drillhole depth for through
fixings
Anchor length
Max. fixture thickness
Thread Width across nut (hexagon
socket)
Item ETA ICC [pcs] [mm] [mm] [mm] [mm] [mm] [mm]
FH II 10/15 SK 503136 — ■ 50 £380.02 G33 10 70 65 65 10 M 6FH II 10/25 SK 503137 — ■ 50 £400.97 G33 10 80 75 75 25 M 6FH II 10/50 SK 503138 — ■ 50 £440.28 G33 10 105 100 100 50 M 6FH II 12/15 SK 044917 — ■ 25 £314.58 G33 12 95 90 90 15 M 8FH II 12/25 SK 044918 — ■ 25 £338.91 G33 12 105 100 100 25 M 8FH II 12/50 SK 044919 — ■ 25 £350.01 G33 12 130 125 125 50 M 8Stainless Steel A4FH II 12/15 SK 510931 ■ — 25 £1,314.00 G33 12 95 90 15 M 8 5FH II 12/30 SK 510932 ■ — 25 £1,550.17 G33 12 110 105 30 M 8 6FH II 12/50 SK 510933 ■ — 25 £2,019.44 G33 12 130 125 50 M 8 6FH II 15/15 SK 510934 ■ — 25 £1,768.38 G33 15 105 100 15 M 10 6FH II 18/30 SK 510935 ■ — 20 £3,728.02 G33 18 135 130 30 M 12 8
High performance anchor FH II-SK with countersunk head
STEEL FIXINGS
FH II - H
Items to order onlyzinc-plated
steel ApprovalSales unit
£ Price100 pieces
Discount group
Drill hole diameter
Min. drill hole depth for through fixings
Anchor length
Max. fixture thickness
Thread Width across nut
Item Art.-No. ETA ICC [pcs] [mm] [mm] [mm] [mm] [mm]
FH II 10/10 H 503139 ■ — 50 £277.83 G33 10 65 75 10 M 6 13FH II 10/25 H 503140 ■ — 50 £268.72 G33 10 80 90 25 M 6 13FH II 10/50 H 503141 ■ — 50 £297.23 G33 10 105 115 50 M 6 13FH II 12/10 H 044905 ■ — 50 £328.56 G33 12 90 100 10 M 8 17FH II 12/25 H 044906 ■ — 50 £391.18 G33 12 105 115 25 M 8 17FH II 12/50 H 044907 ■ — 25 £431.58 G33 12 130 140 50 M 8 17FH II 15/10 H 044908 ■ ▲ 25 £450.43 G33 15 100 115 10 M 10 17FH II 15/25 H 044909 ■ ▲ 25 £531.98 G33 15 115 130 25 M 10 17FH II 15/50 H 044910 ■ ▲ 25 £584.20 G33 15 140 155 50 M 10 17FH II 18/25 H 044915 ■ ▲ 20 £789.48 G33 18 130 145 25 M 12 19FH II 18/50 H 044916 ■ ▲ 20 £889.23 G33 18 155 170 50 M 12 19
High performance anchor FH II-H with dome head
FH II - I Internally threaded anchor
Items to order onlyZinc-plated
steelSales unit
£ Price100 pieces
Discount group
Drill hole diameter
Min. drill depth pre-positioned
installation
Effective anchorage
depth
Total length
Thread Gap Installation torque
Item Art.-No. ETA [pcs] [mm] [mm] [mm] [mm] [mm] [mm] [Nm]
FH II-I 12/M6 520358 ■ 25 £434.75 G33 12 85 67 78 M6 3-5 15FH II-I 12/M8 520359 ■ 25 £439.62 G33 12 85 67 78 M8 3-5 15FH II-I 15/M10 519014 ■ 25 £555.38 G33 15 85 76 90 M10 3-5 25FH II-I 15/M12 519015 ■ 20 £559.83 G33 15 85 76 90 M12 3-5 25Stainless Steel A4FH II-I 12/M6 520360 ■ 25 £713.68 G33 12 85 67 78 M6 3-5 15FH II-I 12/M8 520361 ■ 25 £718.55 G33 12 85 67 78 M8 3-5 15FH II-I 15/M10 519018 ■ 25 £1,017.46 G33 15 85 76 90 M10 3-5 25FH II-I 15/M12 519019 ■ 20 £1,026.36 G33 15 85 76 90 M12 3-5 25
High performance FH II-I Hex. drive setting tool (included)
31
For full product details please refer to the Main Catalogue Section
FH II - B
Items to order onlyzinc-plated
steel ApprovalSales unit
£ Price100 pieces
Discount group
Drill hole diameter
Min. drill hole depth for through fixings
Anchor length
Max. fixture thickness
Thread Width across nut
Item Art.-No. ETA ICC [pcs] [mm] [mm] [mm] [mm] [mm] [mm]
FH II 10/10 B 503142 ■ — 50 £192.65 G33 10 65 70 10 M 6 10FH II 10/25 B 503143 ■ — 50 £216.63 G33 10 80 85 25 M 6 10FH II 10/50 B 503144 ■ — 50 £233.95 G33 10 105 110 50 M 6 10FH II 12/10 B 048773 ■ ▲ 50 £289.93 G33 12 90 95 10 M 8 13FH II 12/25 B 048774 ■ ▲ 50 £314.55 G33 12 105 110 25 M 8 13FH II 12/50 B 048775 ■ ▲ 25 £352.68 G33 12 130 135 50 M 8 13FH II 12/100 B 046832 ■ ▲ 25 £417.60 G33 12 180 185 100 M 8 13FH II 15/10 B 048776 ■ ▲ 25 £594.07 G33 15 100 110 10 M 10 17FH II 15/25 B 048777 ■ ▲ 25 £610.69 G33 15 115 125 25 M 10 17FH II 15/50 B 048778 ■ ▲ 25 £718.92 G33 15 140 150 50 M 10 17FH II 15/100 B 046835 ■ ▲ 20 £857.79 G33 15 190 200 100 M 10 17FH II 18/25 B 048779 ■ ▲ 20 £901.69 G33 18 130 140 25 M 12 19FH II 18/50 B 048780 ■ ▲ 20 £1,081.77 G33 18 155 165 50 M 12 19FH II 18/100 B 046841 ■ ▲ 10 £1,346.42 G33 18 205 215 100 M 12 19FH II 24/25 B 048886 ■ ▲ 10 £1,754.43 G33 24 150 167 25 M 16 24FH II 24/50 B 048887 ■ ▲ 10 £2,047.73 G33 24 175 192 50 M 16 24FH II 24/100 B 046842 ■ ▲ 5 £2,744.90 G33 24 225 242 100 M 16 24FH II 28/30 B 047547 ■ ▲ 4 £3,359.40 G33 28 185 199 30 M 20 30FH II 28/60 B 047548 ■ ▲ 4 £4,008.70 G33 28 215 229 60 M 20 30FH II 28/100 B 506630 ■ ▲ 4 £4,791.83 G33 28 255 271 100 M 20 30FH II 32/60 B 047550 ■ ▲ 4 £6,017.32 G33 32 240 283 60 M 24 361) Delivery time on request.
High performance anchor FH II-B with hexagon nut & threaded bolt
STEEL FIXINGS
FZA Undercut anchor
Items to order onlyzinc-plated
steelSales unit
£ Price100 pieces
Discount group
Required drill bit *FZUB
Required setting tool *FZE plus
Bolt length
Max. fixture thickness
Thread Width across nut
Item Art.-No. ETA [pcs] [mm] [mm] [mm]
FZA 10 x 40 M6/10 060712 ■ 25 £356.44 G30 10 x 40 FZE 10 plus 60 10 M 6 10FZA 12 x 40 M 8/15 060715 ■ 25 £567.51 G30 12 x 40 FZE 12 plus 69 15 M 8 13FZA 12 x 50 M 8/15 060716 ■ 20 £712.30 G30 12 x 50 FZE 12 plus 79 15 M 8 13FZA 14 x 40 M10/25 060718 ■ 25 £605.67 G30 14 x 40 FZE 14 plus 79 25 M 10 17FZA 14 x 60 M10/25 060719 ■ 10 £883.77 G30 14 x 60 FZE 14 plus 102 25 M 10 17FZA 18 x 80 M12/25 060721 ■ 10 £1,463.61 G30 18 x 80 FZE 18 plus 126 25 M 12 19FZA 22 x 100 M16/60 060724 ■ 10 £3,422.04 G30 22 x 100 FZE 22 plus 184 60 M 16 24FZA 22 x 125 M16/60 060725 ■ 6 £4,746.69 G30 22 x 125 FZE 22 plus 209 60 M 16 24Stainless steel A4FZA 12 x 50 M 8/15 060776 ■ 20 £1,890.79 G30 12 x 50 FZE 12 plus 79 15 M 8 13FZA 14 x 40 M10/25 060778 ■ 20 £2,150.93 G30 14 x 40 FZE 14 plus 79 25 M 10 17FZA 14 x 60 M10/25 060779 ■ 10 £3,487.20 G30 14 x 60 FZE 14 plus 102 25 M 10 17FZA 14 x 60 M10/50 060766 ■ 10 £3,940.98 G30 14 x 60 FZE 14 plus 126 50 M 10 17FZA 18 x 80 M12/25 060781 ■ 10 £5,351.71 G30 18 x 80 FZE 18 plus 126 25 M 12 19FZA 18 x 80 M12/55 060767 ■ 10 £5,405.01 G30 18 x 80 FZE 18 plus 156 55 M 12 19FZA 22 x 100 M16/60 060782 ■ 10 £8,782.15 G30 22 x 100 FZE 22 plus 184 60 M 16 24FZA 22 x 125 M16/60 060768 ■ 6 £10,366.85 G30 22 x 125 FZE 22 plus 209 60 M 16 24
*For drill bits and setting tools see page 33
ZYKON Through anchor FZA
32
FZA - D
Items to order onlyzinc-plated
steelSales unit
£ Price100 pieces
Discount group
Required drill bit *FZUB
Required setting tool *FZE plus
Bolt length
Max. fixture thickness
Thread Width across nut
Item Art.-No. ETA [pcs] [mm] [mm] [mm] [mm]
FZA 14 x 100 M 8 D/30 060658 ■ 10 £1,302.16 G30 14 x 100 FZE 14 plus 126 40 M 10 17FZA 18 x 100 M12 D/20 060684 ■ 10 £1,651.92 G30 18 x 100 FZE 18 plus 126 20 M 12 19FZA 22 x 125 M16 D/25 060663 ■ 10 £4,005.36 G30 22 x 125 FZE 22 plus 156 25 M 16 24*For drill bits and setting tools see page 33
ZYKON Through anchor FZA-D
STEEL FIXINGS
FZA - I
Items to order onlyzinc-plated
steelSales unit £ Price
100 piecesDiscount
groupRequired
drill bit *FZUBRequired setting
tool *FZE plusInternal thread
Min. bolt penetration
Max. bolt penetration
Art.-No. ETA [pcs] [mm] [mm] [mm]
FZA 12 x 40 M6 I 060758 ■ 25 £591.79 G30 12 x 40 FZE 12 plus M 6 8 13FZA 14 x 60 M8 I 060760 ■ 20 £854.22 G30 14 x 60 FZE 14 plus M 8 11 17FZA 18 x 80 M10 I 060761 ■ 10 £1,461.80 G30 18 x 80 FZE 18 plus M 10 13 21FZA 22 x 100 M12 I 060763 ■ 10 £3,201.43 G30 22 x 100 FZE 22 plus M 12 15 25FZA 22 x 125 M12 I 060769 ■ 10 £4,129.46 G30 22 x 125 FZE 22 plus M 12 15 25Stainless steel A4FZA 12 x 40 M6 I 060783 ■ 25 £1,767.61 G30 12 x 40 FZE 12 plus M 6 8 13FZA 12 x 50 M6 I 060784 ■ 25 £2,020.17 G30 12 x 50 FZE 12 plus M 6 8 13FZA 14 x 60 M8 I 060786 ■ 20 £3,201.25 G30 14 x 60 FZE 14 plus M 8 11 17FZA 18 x 80 M10 I 060787 ■ 10 £4,683.23 G30 18 x 80 FZE 18 plus M 10 13 21FZA 22 x 100 M12 I 060788 ■ 10 £8,437.30 G30 22 x 100 FZE 22 plus M 12 15 25FZA 22 x 125 M12 I 060770 ■ 10 £10,377.51 G30 22 x 125 FZE 22 plus M 12 15 25*For drill bits and setting tools see page 33
ZYKON Internally-threaded anchor FZA-I
FZA - D A4 & Corrosion Resistant C
Items to order onlyzinc-plated
steelSales unit
£ Price100 pieces
Discount group
Required drill bit *FZUB
Required setting tool *FZE plus
Bolt length Max. fixture thickness
Thread Width across nut
Item Art.-No. ETA [pcs] [mm] [mm] [mm] [mm]
Stainless steel A4FZA 12 x 50 M 8 D/10 060664 ■ 25 £2,004.70 G30 12 x 50 FZE 12 plus 69 10 M 8 13FZA 12 x 80 M 8 D/30 060666 ■ 25 £2,220.86 G30 12 x 80 FZE 12 plus 99 30 M 8 13FZA 14 x 80 M10 D/20 060669 ■ 10 £3,477.24 G30 14 x 80 FZE 14 plus 102 20 M 10 17FZA 14 x 100 M 8 D/30 060670 ■ 10 £4,891.12 G30 14 x 100 FZE 14 plus 126 40 M 10 17FZA 18 x 100 M12 D/20 060672 ■ 10 £5,735.87 G30 18 x 100 FZE 18 plus 126 20 M 12 19FZA 18 x 130 M12 D/50 060673 ■ 10 £7,695.73 G30 18 x 130 FZE 18 plus 156 50 M 12 19FZA 22 x 125 M16 D/25 060675 ■ 10 £10,194.27 G30 22 x 125 FZE 22 plus 156 25 M 16 24Highly corrossion resistant steel C FZA 12 x 50 M 8 D/10 096319 1) ■ 20 £12,617.66 G30 12 x 50 FZE 12 plus 69 10 M 8 13FZA 12 x 80 M 8 D/30 096354 1) ■ 20 £13,880.82 G30 12 x 80 FZE 12 plus 99 30 M 8 13FZA 18 x 130 M12 D/50 096357 1) ■ 10 £27,991.25 G30 18 x 130 FZE 18 plus 156 50 M 12 191) Delivery time on request.*For drill bits and setting tools see page 33
33
For full product details please refer to the Main Catalogue Section
FZEA II
Items to order onlyzinc-plated
steelSales unit
£ Price100 pieces
Discount group
Required drill bit *FZUB
Required setting tool *FZED plus
Length Internal thread
Max. bolt penetration
Min. bolt penetration
Item Art.-No. ETA [pcs] [mm] [mm] [mm]
FZEA II 10 x 40 M 8 047303 ■ 100 £161.78 G31 10 x 40 FZED 10 plus 43 M 8 17 11FZEA II 12 x 40 M10 047304 ■ 100 £181.01 G31 12 x 40 FZED 12 plus 43 M 10 19 13FZEA II 14 x 40 M12 047305 ■ 50 £213.02 G31 14 x 40 FZED 14 plus 43 M 12 21 15Stainless Steel A4FZEA II 10 x 40 M 8 A4 047306 ■ 100 £667.09 G31 10 x 40 FZED 10 plus 43 M 8 17 11FZEA II 12 x 40 M10 A4 047307 ■ 100 £835.47 G31 12 x 40 FZED 12 plus 43 M 10 19 13FZEA II 14 x 40 M12 A4 047308 ■ 50 £980.40 G31 14 x 40 FZED 14 plus 43 M 12 21 15Highly Corrosion resistant steel CFZEA II 10 x 40 M 8 C 047309 ■ 100 £980.94 G31 10 x 40 FZED 10 plus 43 M 8 17 11FZEA II 14 x 40 M12 C 047311 ■ 50 £2,794.13 G31 14 x 40 FZED 14 plus 43 M 12 21 15*For drill bits and setting tools see below
Zykon-Hammerset anchor FZEA II
STEEL FIXINGS
Drill bit FZUB
FZE / FZED Plus Setting Tools
Items to order onlySales unit £ Price
per 100 piecesDiscount
groupFits anchor
Item Art.-No. [pcs] bolt anchor push-through anchor internal thread anchor
FZE 10 plus 0446371) 1 £40.18 G30 FZA 10 x ... M6 - -FZE 12 plus 044638 1 £33.25 G30 FZA 12 x ... M8 FZA 12 x ... M8 D FZA 12 x ... M6 IFZE 14 plus 044639 1 £33.25 G30 FZA 14 x ... M10 FZA 14 x ... M10 D FZA 14 x ... M8 IFZE 18 plus 044640 1 £45.57 G30 FZA 18 x ... M12 FZA 18 x ... M12 D FZA 18 x ... M10 IFZE 22 plus 044641 1 £36.73 G30 FZA 22 x ... M16 FZA 22 x ... M16 D FZA 22 x ... M12 IFZED 10 plus 044642 1 £23.91 G31 FZEA II 10 x 40FZED 12 plus 044643 1 £23.91 G31 FZEA II 12 x 40FZED 14 plus 044644 1 £23.91 G31 FZEA II 14 x 401) Without centring pin. For torque wrenches please turn to page 29
Setting tool FZED plusSetting tool FZE plus
FZUB Drill bit
Items to order onlySales unit £ Price
per 100 piecesDiscount
groupFits anchor
Item Art.-No. [pcs] bolt anchor push-through anchor internal thread anchor
FZUB 10 x 40 060622 1 £67.65 G30 FZA 10 x 40 M6 - -FZUB 12 x 40 060623 1 £81.81 G30 FZA 12 x 40 M8 - FZA 12 x 40 M6 IFZUB 12 x 50 060627 1 £120.14 G30 FZA 12 x 50 M8 FZA 12 x 50 M8 D/10 FZA 12 x 50 M6 IFZUB 12 x 80 060626 1 £166.14 G30 - FZA 12 x 80 M8 D/30 -FZUB 14 x 40 060624 1 £125.48 G30 FZA 14 x 40 M10 - -FZUB 14 x 60 060628 1 £134.13 G30 FZA 14 x 60 M10 - FZA 14 x 60 M8 IFZUB 14 x 80 060629 1 £166.98 G30 - FZA 14 x 80 M10 D/20 -FZUB 14 x 100 060630 1 £177.29 G30 - FZA 14 x 100 M10 D/40 -FZUB 18 x 80 060634 1 £252.25 G30 FZA 18 x 80 M12 - FZA 18 x 80 M10IFZUB 18 x 100 060632 1 £280.28 G30 - FZA 18 x 100 M12 D/20 -FZUB 18 x 130 060633 1 £334.36 G30 - FZA 18 x 130 M12 D/50 -FZUB 22 x 100 060636 1 £286.16 G30 FZA 22 x 100 M16 - FZA 22 x 100 M12 IFZUB 22 x 125 060638 1 £432.93 G30 FZA 22 x 125 M16 FZA 22 x 125 M16 D/25 FZA 22 x 125 M12 I
34
FBS-P / FBS-SK
Items to order onlyzinc-plated
steelSales unit £ Price
100 piecesDiscount
groupDrill hole diameter
Drill hole diameter in object
Min. drill-hole depth for through fixings
Anchor length
Max. fixture thickness
Drive
Item Art.-No. ETA [pcs] [mm] [mm] [mm] [mm]
FBS5/5 P 066774 100 £35.17 G26 5 7 60 55 5 T30FBS 6/5 P 066939 ■ 100 £49.80 G26 6 8 65 60 5 T 30FBS 6/25 P 066948 ■ 100 £56.94 G26 6 8 85 80 25 T 30FBS 6/5 SK 066935 ■ 100 £52.33 G26 6 8 65 60 5 T 30
STEEL FIXINGS
For tightening torque please see main catalogue section - High Performance Steel
FBS-P, pan head
FBS-SK, countersunk head
FBS - S
Item to order onlyzinc-plated
steelSales unit
£ Price100 pieces
Discount group
Drill diameter
Drill hole diameter in
object
Screw length
(under head)
Drill depth
Screw-in depth
Max. useable length
Width across
nut
Item Art.-No. ETA [pcs] [mm] [mm] [mm] [mm] [mm] SW [mm]
FBS 8x70 517875 ■ 50 £89.09 G26 8 12 70 75 65 5 13FBS 8x80 517876 ■ 50 £94.07 G26 8 12 80 75 65 15 13FBS 8x90 517877 ■ 50 £95.86 G26 8 12 90 75 65 25 13FBS 8x110 517878 ■ 50 £105.97 G26 8 12 110 75 65 45 13FBS 8x130 517880 ■ 50 £112.66 G26 8 12 130 75 65 65 13FBS 10x70 517881 50 £117.75 G26 10 14 70 75 65 5 15FBS 10x90 517883 ■ 50 £127.78 G26 10 14 90 95 85 5 15FBS 10x100 517884 ■ 50 £137.89 G26 10 14 100 95 85 15 15FBS 10x120 517885 ■ 50 £152.70 G26 10 14 120 95 85 35 15FBS 10x140 517887 ■ 50 £164.80 G26 10 14 140 95 85 55 15FBS 10x160 517891 ■ 50 £215.28 G26 10 14 160 95 85 75 15FBS 10x200 517893 ■ 50 £255.57 G26 10 14 200 95 85 115 15FBS 12x90 517895 20 £245.41 G26 12 16 90 95 85 5 17FBS 12x110 517898 ■ 20 £265.72 G26 12 16 110 110 100 10 17FBS 12x130 517900 ■ 20 £292.59 G26 12 16 130 110 100 30 17FBS 12x150 517903 ■ 20 £317.86 G26 12 16 150 110 100 50 17FBS 14x110 517905 20 £332.99 G26 14 18 110 110 100 10 21FBS 14x135 517908 ■ 8 £381.86 G26 14 18 135 135 125 10 21FBS 14x160 517910 ■ 8 £463.70 G26 14 18 160 170 125 35 21
FBS - S with forged washer
35
For full product details please refer to the Main Catalogue Section
FBS
Item
zinc-plated steel
Sales unit £ Price100 pieces
Discount group
Drill hole diameter
Min. drill hole depth
Anchor length
Projection length
Thread Width across nut
Art.-No. ETA [pcs] [mm] [mm] [mm] [mm] [mm]
FBS 6 M8 066949 ■ 100 £74.80 G26 6 60 75 19 M 8 10FBS 6 M8/M10I 066950 ■ 100 £114.12 G26 6 60 83 26 M8 + M10 13
FBS-M8, outside diameter M8FBS-M8/M10 internal thread M8/M10
STEEL FIXINGS
EA II / EA II A4
Items to order onlyzinc-plated
steelSales unit
£ Price100 piecese
Discount group
Drill hole diameter
Min. Drill hole depth for pre-positioned
installation
Anchor length
Internal thread
Min. bolt penetration
Max. bolt penetration
Item Art.-No. ETA [pcs] [mm] [mm] [mm] [mm] [mm] [mm]
EA II M 6 048264 ■ 100 £46.90 G47 8 32 30 M 6 6 13EA II M 8 048284 ■ 100 £61.72 G47 10 33 30 M 8 8 13EA II M 8 x 40 048323 ■ 50 £67.83 G47 10 43 40 M 8 8 13EA II M 10 x 30 048332 ■ 50 £77.22 G47 12 33 30 M 10 10 13EA II M 10 048339 ■ 50 £88.02 G47 12 43 40 M 10 10 17EA II M 12 048406 ■ 25 £134.65 G47 15 54 50 M 12 12 22EA II M 16 048408 ■ 20 £319.37 G47 20 70 65 M 16 16 28Stainless steel A4EA II M 6 048410 ■ 100 £243.11 G47 8 32 30 M 6 6 13EA II M 8 048411 ■ 100 £288.44 G47 10 33 30 M 8 8 13EA II M 8 x 40 048412 ■ 50 £446.94 G47 10 43 40 M 8 8 13EA II M 10 048414 ■ 50 £397.83 G47 12 43 40 M 10 10 17EA II M 12 048415 ■ 25 £824.65 G47 15 54 50 M 12 12 22EA II M 16 048416 ■ 20 £1,922.76 G47 20 70 65 M 16 16 28EA II M 20 048417 ■ 10 £4,670.06 G47 25 85 80 M 20 20 34Associated setting tool for manual installation (EAW H plus). For installation with hammer drill (EA II-S-SDS) - see page 36
Drop in anchor with lip
EA-N Drop in anchor
ItemOrder No: min order qty
pcs£ price
100 piecesdiscount
groupdrill effect. anchoring
& drill depththread bolt penetration
min Max
[mm] [mm] [mm] [mm]
EA M6 N 90159 100 £20.31 G39 8 25 M 6 6 12EA M8 N 90160 100 £30.66 G39 10 30 M 8 8 13EA M10 N 90161 50 £37.69 G39 12 40 M 10 10 17EA M12 N 90162 50 £97.65 G39 15 50 M 12 12 22EA M16 N 90163 20 £150.45 G39 20 65 M 16 16 27EA M 20 N 90164 25 £426.24 G39 25 80 M 20 20 34
FDA-R Drop in anchor with lip
Order No: min order qtypcs
£ price100 pieces
discount group
drill drill depth thread min. bolt penetration
Item [mm] [mm] [mm] [mm]
FDA-R 6 x 25 42630 100 £23.11 G39 8 27 M 6 6FDA-R 8 x 30 42631 100 £38.71 G39 10 32 M 8 8FDA-R 10 x 30 42632 50 £47.12 G39 12 33 M 10 8FDA-R 10 setting tool - EAW H 10 (Art No. 48487). NOT suitable for FDA-R 6 & 8. FDA-R 6 - use setting tool EAW H 6. FDA-R 8 - use setting tool EAW H 8.
For setting tools pleaseturn to page 36
For setting tools pleaseturn to page 36
36
FHY Hollow deck anchor
Items to order onlyzinc-plated
steelSales unit
£ Price100 pieces
Discount group
Drill hole diameter
Anchor length
Thread Min. drill hole depth
Min. bolt penetration
Item Art.-No. [pcs] [mm] [mm] [mm] [mm]
FHY M 6 030138 50 £149.06 G36 10 37 M 6 50 37FHY M 8 030146 25 £230.96 G36 12 43 M 8 60 43FHY M 10 030148 20 £315.18 G36 16 52 M 10 65 52Stainless SteelFHY M 6 030139 50 £456.13 G36 10 37 M 6 50 37FHY M 8 030147 25 £625.27 G36 12 43 M 8 60 43FHY M10 030151 20 £846.00 G36 16 52 M 10 65 52
Accessories - EAW H Plus
Items to order onlySales unit £ Price
per 100 piecesDiscount
groupFits
Item Art.-No. [pcs]
EAW H 6 503205 1 £1.82 G47 FDA-R 6 / EA M 6 NEA-ST 8 504576 1 £4.11 G47 FDA-R 8 / EA M 8 NEA-ST 10 504584 1 £4.55 G47 EA M 10 NEA-ST 16 504586 1 £8.49 G47 EA M 16 NEAW H 16 503209 1 £30.25 G47 EA M 16 NEAW H 6 Plus 044630 1 £20.17 G47 EA II M6EAW H 8 Plus 044631 1 £21.65 G47 EA II M 8EAW H 8 x 40 Plus 044632 1 £17.77 G47 EA II M 8 x 40EAW H 10 Plus 044633 1 £22.02 G47 EA II M 10EAW H 10 x 30 plus 048487 1 £19.12 G47 EA II M 10 x 30EAW H 12 Plus 044634 1 £22.21 G47 EA II M 12, EA II M 12 DEAW H 16 Plus 044635 1 £25.39 G47 EA II M 16EAW H 20 Plus 044636 1 £34.19 G47 EA II M 20
Setting tool EAW H Plus with hand impact protection for your safety and embossing tool.Setting tool EA-ST
EA II S-SDS
Items to order only Sales unit £ Price per 100 pieces
Discount group
Tool holder Fits
Item Art.-No. [pcs]
EA II S-SDS 6 048065 1 £40.15 G47 SDS plus EA II M6EA II S-SDS 8 048066 1 £45.27 G47 SDS plus EA II M 8EA II S-SDS 10 048070 1 £49.56 G47 SDS plus EA II M 10EA II S-SDS 12 048071 1 £49.90 G47 SDS plus EA II M 12 D / EA II M 12 / EA M 12 N DEA II S-SDS-M 16 048072 1) 1 £93.92 G47 SDS max EA II M 161) Delivery time on request.
Machine setting tool EA II S-SDS
STEEL FIXINGS
Setting tool EAW H
37
For full product details please refer to the Main Catalogue Section
FNA II Nail anchor
Items to order onlyzinc-plated
steel
Appr
oval Sales
unit£ Price
100 piecesDiscount
groupDrill hole diameter
Min. drill hole depth for
through fixings
Anchor length
Max. fixture thickness
KD head-Ø
Item Art.-No. ETA [pcs] [mm] [mm] [mm] [mm] [mm]
FNA II 6 x 25/5 044121 1) ■ 100 £85.35 G45 6 40 35 5 13FNA II 6 x 30/5 044115 1) ■ 100 £89.10 G45 6 45 40 5 13FNA II 6 x 30/30 044116 ■ 50 £141.61 G45 6 70 65 30 13FNA II 6 x 30/50 044117 ■ 50 £172.96 G45 6 90 85 50 13FNA II 6 x 30/75 044118 ■ 50 £191.95 G45 6 115 110 75 13FNA II 6 x 30/100 044119 ■ 50 £286.70 G45 6 140 135 100 13FNA II 6 x 30/120 044120 ■ 50 £306.31 G45 6 160 155 120 13Stainless SteelFNA II 6 x 30/5 044122 — 100 £485.70 G45 6 45 40 5 13FNA II 6 x 30/30 044123 — 50 £531.00 G45 6 70 65 30 13FNA II 6 x 30/50 046024 — 50 £442.38 G45 6 90 85 50 13Highly Corrosion Resistant Steel CFNA II 6 x 30/5 044124 — 25 £611.44 G45 6 90 85 50 13NA II 6 x 30/20 506147 — 50 £633.72 G45 6 60 55 20 13FNA II 6 x 30/30 044125 — 25 £656.83 G45 6 70 65 30 13FNA II 6 x 30/50 500569 — 50 £711.74 G45 6 90 85 50 13FNA II 6 x 30/75 500573 2) — 50 £899.10 G45 6 115 110 75 13FNA II 6 x 30/100 500574 2) — 50 £1,198.71 G45 6 140 135 100 13FNA II 6 x 30/120 500575 2) — 50 £1,603.28 G45 6 160 155 120 131) with hexagon below the nail head for anti-rotation lock of hole and wire hangers (for example) and centring for optional setting tool FNA-S2) On request.
FNA II with nail head
FNA II M6
Items to order only
zinc-plated steel
Sales unit
£ Price100 pieces
Discount group
Drill hole diameter
Min. drillhole depth for through
fixings
Anchor length
Max. fixture thickness
Thread Width across nut
Item Art.-No. ETA [pcs] [mm] [mm] [mm] [mm] [mm]
FNA II 6 x 25 M6/5 044111 ■ 100 £101.34 G45 6 40 45 5 M 6 10FNA II 6 x 30 M6/5 044109 ■ 100 £106.05 G45 6 45 50 5 M 6 10FNA II 6 x 30 M6 x 41 044110 1) ■ 100 £100.75 G45 6 40 41 — M 6 10FNA II 6 x 30 M6/10 046022 ■ 100 £116.71 G45 6 45 55 10 M 6 10FNA II 6 x 30 M8/5 044114 ■ 50 £237.99 G45 6 45 51 5 M 8 13Stainless SteelFNA II 6 x 30 M6/5 044112 2) 50 £534.05 G45 6 45 50 5 M 6 10Highly Corrosion Resistant Steel CFNA II 6 x 30 M6/5 044113 2) 25 £1,214.31 G45 6 45 50 5 M 6 101) Without nut e.g. for fixing of pipe clamps. 2) with nut and washer (no flange nut)
FNA II M6 with thread and flange nut
STEEL FIXINGS
38
FNA II Setting tools
Items to order onlySales unit
£ Price per 100 pieces
Discount group
Use Description
Item Art.-No. [pcs]
FNA S-SDS 061547 1 £23.77 G47 for all FNA II with nail headThe ideal setting tool for the serial installation with SDS-plus adapter for driving in FNA II with nail head using a hammer drill.
FNA S-SBO 061548 1 £25.84 G47 for all FNA II with nail head For a power saving and fast installation to be placed on the drill.
FNA S-H 095990 1 £11.40 G47 for FNA II with metric thread M6E.g. for the fixing of installation of mounting rails. Chuck with outer diameter of 15mm for the installation of FNA II M6 by hand.
Machine setting tool FNA S-SDSMachine setting tool FNA S-SBO for mounting on the drill bit (drill-Ø 6mm)
Hand tool FNA S-H
FNA II H/OE
Items to order onlyzinc-plated
steelSales unit
£ Price100 piecese
Discount group
Drill hole diameter
Anchor length
Min. drill hole depth
Inner diameter of the hook/eye
Item Art.-No. ETA [pcs] [mm] [mm] [mm] [Ø mm]
FNA II 6 x 25 H 044126 — 50 £157.02 G45 6 54 35 10FNA II 6 x 25 OE 044127 ■ 50 £161.69 G45 6 54 35 10
FA Demountable anchor bolt
Items to order onlyzinc-plated
steelSales unit
£ Price100 pieces
Discount group
drillØ
min. drill-hole depth for
through fixings
min.anchorage
depth
anchor length
max. fxing
thickness
torque width across nut
Item Art.-No. [pcs] [mm] [mm] [mm] [mm] [mm] [mm]
FA 8/15 (8x70) 500511 25 £220.65 G34 8 75 50 65 15 10 13FA 8/25 (8 x 85) 500512 25 £268.83 G34 8 90 50 80 25 10 13FA 10/15 (10 x 85) 500515 25 £428.37 G34 10 90 60 75 15 20 17FA 10/50 (10 x 120) 500516 25 £563.76 G34 10 120 60 110 50 20 17FA 12/15 (12 x 100) 500522 20 £608.43 G34 12 100 70 85 15 35 19FA 12/50 (12 x 135) 500523 20 £744.66 G34 12 135 70 120 50 35 19
FA 14/20 (14 x 115) 500526 10 £1,013.72 G34 14 115 80 100 20 50 22
FA 14/50 (14 x 145) 500527 20 £1,205.06 G34 14 145 80 130 50 50 22
TA M Heavy duty security anchor
Items to order only
zinc-plated steel
Sales unit
£ Price100 pieces
Discount group
Drill hole diameter
Min. drill-hole depth for
through fixings
Anchor length
Max. fixture thickness
Thread Width across nut
Art.-No. [pcs] [mm] [mm] [mm] [mm] [mm]Item gvz
TA M8 BP 090265 50 £593.32 G32 12 95 84 25 M 8 13
TA M BPwith twist-off head
STEEL FIXINGS
Hook FNAII H Eye FNAII OE
39
For full product details please refer to the Main Catalogue Section
FSA - S
Items to order onlyzinc-plated
steelSales unit
£ Price100 pieces
Discount group
Drill hole diameter
Min. drill-hole depth for through fixings
Max. fixture thickness
Anchor length
Thread
Item Art.-No. [pcs] [mm] [mm] [mm] [mm]
FSA 8/15 S (8x65) 068520 50 £97.06 G37 8 65 15 64 M 6FSA 8/40 S (8x70) 068521 50 £105.46 G37 8 90 40 89 M 6FSA 8/65 S (8x115) 068522 50 £121.55 G37 8 115 65 114 M 6FSA 10/10 S (10x65) 068523 20 £121.90 G37 10 65 10 65 M 8FSA 10/35 S (10x90) 068524 20 £123.36 G37 10 90 35 90 M 8FSA 10/60 S (10x115) 068525 20 £137.11 G37 10 115 60 115 M 8FSA 12/10 S (12x75) 068526 20 £144.00 G37 12 75 10 76 M 10FSA 12/25 S (12x90) 068527 20 £167.29 G37 12 90 25 91 M 10FSA 12/50 S (12x115) 068528 20 £182.14 G37 12 115 50 116 M 10
Sleeve anchor with Hex. head FSA-S
FSA GB
Items to order onlyzinc-plated
steelSales unit
£ Price100 pieces
Discount group
Drill hole diameter
Min. drill-hole depth for through
fixings
Max. fixture thickness
Anchor length
Thread
Item Art.-No [pcs] [mm] [mm] [mm] [mm]
FSA GB 6/8 (6x35) 42661 100 £32.67 G43 6 20 8 35 M 4.5FSA GB 6/25 (6x56) 42662 100 £29.63 G43 6 20 25 56 M 4.5FSA GB 8/8 (8x40) 42663 100 £42.11 G43 8 25 8 40 M 6FSA GB 8/30 (8x65) 42655 100 £44.46 G43 8 25 30 65 M 6FSA GB 8/55 (8x85) 42664 25 £72.09 G43 8 25 55 85 M 6FSA GB 10/10 (10x50) 42665 25 £72.09 G43 10 30 10 50 M 8FSA GB 10/35 (10x70) 42656 25 £92.29 G43 10 30 35 70 M 8FSA GB 10/60 (10x97) 42657 25 £117.90 G43 10 30 60 100 M 8
FSA GB 12/12 (12x60) 42666 25 £123.96 G43 12 40 12 60 M 10FSA GB 12/20 (12x75) 42658 25 £140.19 G43 12 40 20 75 M 10FSA GB 12/50 (12x99) 42659 20 £175.15 G43 12 40 50 100 M 10FSA GB 12/75 (12x129) 42667 20 £202.10 G43 12 40 75 130 M 10FSA GB 16/12 (16x65) 42668 20 £216.42 G43 16 40 12 65 M 12FSA GB 16/50 (16x111) 42660 10 £323.37 G43 16 40 50 110 M 12FSA GB 16/80 (16x147) 42669 10 £407.57 G43 16 40 80 150 M 12FSA GB 20/20 (20x82) 42670 10 £340.29 G43 20 50 20 80 M 16FSA GB 20/95 (20x151) 42671 5 £492.00 G43 20 50 95 150 M 16
Sleeve anchor FSA GB
STEEL FIXINGS
40
FWB-P Wallbolt
zinc-plated steel
Sales unit
£ Price100 pieces
Discount group
Drill hole dia.
Min. drill-hole
depth
anchor length
Max. fixing
thickness
Item Art.-No. [pcs] [mm] [mm] [mm] [mm]
FWB 6/10 P 42696 25 £101.12 G46 12 50 65 10FWB 6/25 P 42697 25 £164.55 G46 12 50 80 25FWB 6/60 P 42698 25 £197.17 G46 12 50 115 60FWB 8/10 P 42699 25 £143.14 G46 14 55 75 10FWB 8/25 P 42700 25 £221.60 G46 14 55 90 25FWB 8/60 P 42701 25 £272.95 G46 14 55 125 60FWB 10/15 P 42702 25 £243.63 G46 16 65 90 15FWB 10/30 P 42703 25 £180.56 G46 16 65 105 30FWB 10/60 P 42704 25 £381.03 G46 16 65 135 60FWB 12/15 P 42705 25 £392.53 G46 20 90 110 15FWB 12/30 P 42706 25 £475.08 G46 20 90 125 30FWB 12/75 P 42707 25 £538.43 G46 20 90 170 75FWB 16/35 P 42709 10 £651.71 G46 25 130 170 35FWB 16/75 P 42710 10 £738.51 G46 25 130 210 75
Projecting bolt FWB P
FWB-L Wallbolt
zinc-plated steel
Sales unit
£ Price100 pieces
Discount group
Drill hole dia.
Min. drill-hole
depth
anchor length
Max. fixing
thickness
Item Art.-No. [pcs] [mm] [mm] [mm] [mm]
FWB 6/10 L 42677 25 £117.09 G46 12 50 55 10FWB 6/25 L 42678 25 £120.60 G46 12 50 70 25FWB 6/40 L 42679 25 £173.54 G46 12 50 85 40FWB 8/10 L 42680 25 £175.42 G46 14 55 60 10FWB 8/25 L 42681 25 £197.12 G46 14 55 85 25FWB 8/40 L 42682 25 £227.75 G46 14 55 90 40FWB 10/10 L 42683 25 £269.21 G46 16 65 70 10FWB 10/25 L 42684 25 £288.90 G46 16 65 85 25FWB 10/50 L 42685 25 £322.47 G46 16 65 110 50FWB 10/75 L 42686 25 £376.04 G46 16 65 135 75FWB 12/10 L 42687 25 £435.98 G46 20 90 85 10FWB 12/25 L 42688 25 £486.90 G46 20 90 100 25FWB 12/40 L 42689 25 £501.27 G46 20 90 115 40FWB 12/60 L 42690 25 £528.69 G46 20 90 135 60FWB 16/15 L 42691 10 £835.96 G46 25 130 135 15FWB 16/30 L 42692 10 £683.70 G46 25 130 150 30
STEEL FIXINGS
Loose bolt FWB L
41
For full product details please refer to the Main Catalogue Section
FWB - S
Item to order onlyzinc-plated
steelSales unit
£ Price100 pieces
Discount group
Drill hole dia.
Min. drill-hole depth
Anchor length Thread
Item Art.-No. [pcs] [mm] [mm] [mm] [mm]
FWB M6 S 051302 25 £84.71 G46 12 50 45 M6FWB M8 S 042673 25 £128.74 G46 14 55 50 M8FWB M10 S 042674 25 £194.34 G46 16 65 60 M10FWB M12 S 051303 25 £244.18 G46 20 90 75 M12FWB M16 S 044967 10 £587.62 G46 25 130 115 M16
FWB shield
FWB - E
zinc-plated steel
Sales unit
£ Price100 pieces
Discount group
Drill hole dia.
Min. drill-hole depth
Eye / hook Diameter
Thread
Item Art.-No. [pcs] [mm] [mm] [mm] [mm]
FWB M6 x 73E 42714 25 £211.80 G46 12 6 45 50
FWB M8 x 87E 42715 25 £308.96 G46 14 8 50 60
FWB M10 x 108E 42716 25 £524.92 G46 16 10 50 70
FWB M12 x 130E 42717 25 £849.66 G46 20 12 75 85
FWB E Eye bolt
FWB - H
zinc-plated steel
Sales unit
£ Price100 pieces
Discount group
Drill hole dia.
Min. drill-hole depth
Eye / hook Diameter
Thread
Item Art.-No. [pcs] [mm] [mm] [mm] [mm]
FWB M6 x 73H 42719 25 £177.74 G46 12 6 45 50
FWB M8 x 87H 42720 25 £243.36 G46 14 8 50 60
FWB M10 x 108H 42721 25 £426.91 G46 16 10 50 70
FWB H Hook bolt
STEEL FIXINGS
42
SXR - T
Item to order onlyzinc-plated
steelSales unit
£ Price100 pieces
Discount group
Drill holediameter
Min. drill hole depth for push through
installatuion
Min embedment
depth
Anchor length
max. fixture
thickness
Drivebit
Item Art.-No. ETA [pcs] [mm] [mm] [mm] [mm] [mm]
SXR 8 x 60 T 502999 50 £69.73 G19 8 70 30 60 10 Torx 30SXR 8 x 80 T 503000 50 £74.50 G19 8 90 30 80 30 Torx 30SXR 8 x 100 T 503001 50 £93.34 G19 8 110 30 100 50 Torx 30SXR 8 x 120 T 503002 50 £108.81 G19 8 130 30 120 70 Torx 30SXR 10 x 80 T 46263 ■ 50 £89.46 G19 10 90 50 80 30 Torx 40SXR 10 x 100 T 46264 ■ 50 £105.69 G19 10 110 50 100 50 Torx 40SXR 10 x 120 T 46265 ■ 50 £126.01 G19 10 130 50 120 70 Torx 40SXR 10 x 140 T 46266 ■ 50 £146.31 G19 10 150 50 140 90 Torx 40SXR 10 x 160 T 46267 ■ 50 £203.32 G19 10 170 50 160 110 Torx 40SXR 10 x 180 T 46268 ■ 50 £260.27 G19 10 190 50 180 130 Torx 40SXR 10 x 200 T 46269 ■ 50 £375.70 G19 10 210 50 200 150 Torx 40SXR 10 x 230 T 46270 ■ 50 £536.68 G19 10 240 50 230 180 Torx 40SXR 10 x 260 T 46271 ■ 50 £740.00 G19 10 270 50 260 210 Torx 40
Stainless Steel
SXR 10 x 80 T A4 46272 ■ 50 £393.57 G19 10 90 50 80 30 Torx 40SXR 10 x 100 T A4 46274 ■ 50 £437.36 G19 10 110 50 100 50 Torx 40SXR 10 x 120 T A4 46278 ■ 50 £524.79 G19 10 130 50 120 70 Torx 40SXR 10 x 140 T A4 46279 ■ 50 £612.29 G19 10 150 50 140 90 Torx 40SXR 10 x 160 T A4 46283 ■ 50 £743.42 G19 10 170 50 160 110 Torx 40SXR 10 x 180 T A4 46285 ■ 50 £918.35 G19 10 190 50 180 130 Torx 40SXR 10 x 200 T A4 46286 ■ 50 £1,202.68 G19 10 210 50 200 150 Torx 40SXR 10 x 230 T A4 46287 ■ 50 £1,574.36 G19 10 240 50 230 180 Torx 40SXR 10 x 260 T A4 46288 ■ 50 £1,989.81 G19 10 270 50 260 210 Torx 40
TORXSXR-T - with fischer Torx head safety screw
FRAME FIXINGS
SXR / Z
Items to order onlyzinc-plated
steelSales unit
£ Price100 pieces
Discount group
Drill holediameter
Min. drill hole depth for through fixing
Min. embedment depth
Anchorlength
Max. fixture
thickness
Drivebit
Item Art.-No. ETA [pcs] [mm] [mm] [mm] [mm] [mm]
SXR 6 x 35 Z 503231 1) 50 £32.99 G28 6 60 30 50 20 PZ 2SXR 6 x 50 Z 503232 1) 50 £39.84 G28 6 70 30 60 30 PZ 2SXR 6 x 60 Z 503233 1) 50 £52.30 G28 6 70 30 60 30 PZ 2SXR 8 x 60 Z 505261 50 £58.95 G28 8 70 50 60 10 PZ 3SXR 8 x 80 Z 505262 50 £63.93 G28 8 90 50 80 30 PZ 3SXR 8 x 100 Z 505263 50 £78.97 G28 8 110 50 100 50 PZ 3SXR 8 x 120 Z 505264 50 £108.31 G28 8 130 50 120 70 PZ 3SXR 10 x 80 Z 47977 ■ 50 £71.82 G28 10 90 50 80 30 PZ 4SXR 10 x 100 Z 47978 ■ 50 £79.65 G28 10 110 50 100 50 PZ 4SXR 10 x 120 Z 47979 ■ 50 £84.27 G28 10 130 50 120 70 PZ 4SXR 10 x 140 Z 47980 ■ 50 £91.12 G28 10 150 50 140 90 PZ 4SXR 10 x 160 Z 47981 ■ 50 £104.97 G28 10 170 50 160 110 PZ 4
Without screw
POZISXR-Z - with zinc-plated fischer safety screw for Cross drive Pozi-bit
43
For full product details please refer to the Main Catalogue Section
SXR - FUS
Items to order onlyzinc-plated
steelSales unit
£ Price100 pieces
Discount group
Drill hole diameter
Min. drill hole depth for through
fixings
Min. embedment
depth
Anchor length
Max. fixture thickness
Drive
Item Art.-No. ETA [pcs] [mm] [mm] [mm] [mm] [mm]
SXR 10 x 52 FUS 502456 1) ■ 50 £101.28 G19 10 62 50 52 2 T40/SW13
SXR 10 x 60 FUS 046329 ■ 50 £109.31 G19 10 70 50 60 10 T40/SW13
SXR 10 x 80 FUS 046330 ■ 50 £117.10 G19 10 90 50 80 30 T40/SW13
SXR 10 x 100 FUS 046331 ■ 50 £136.61 G19 10 110 50 100 50 T40/SW13
SXR 10 x 120 FUS 046332 ■ 50 £167.84 G19 10 130 50 120 70 T40/SW13
SXR 10 x 140 FUS 046333 ■ 50 £202.98 G19 10 150 50 140 90 T40/SW13
SXR 10 x 160 FUS 046334 ■ 50 £234.13 G19 10 170 50 160 110 T40/SW13
SXR 10 x 180 FUS 046335 ■ 50 £273.22 G19 10 190 50 180 130 T40/SW13
SXR 10 x 200 FUS 046336 ■ 50 £386.47 G19 10 210 50 200 150 T40/SW13
SXR 10 x 230 FUS 046337 ■ 50 £552.66 G19 10 240 50 230 180 T40/SW13
SXR 10 x 260 FUS 046338 ■ 50 £761.14 G19 10 270 50 260 210 T40/SW131) not pre-assembled
TORXSXR-FUS - with hexagon safety screw, integral washer and T40internal drive
FRAME FIXINGS
SXR - FUS A4
Items to order onlyzinc-plated
steelSales unit
£ Price per 100 pieces
Discount group
Drill hole diameter
Min. drill hole depth for through fixings
Min. embedment
depth
Anchor length
Max. fixture thickness
Drive
Item Art.-No. ETA [pcs] [mm] [mm] [mm] [mm] [mm]
Stainless Steel A4
SXR 10 x 60 FUS 046339 ■ 50 £367.98 G19 10 70 50 60 10 T40/SW13
SXR 10 x 80 FUS 046341 ■ 50 £417.05 G19 10 90 50 80 30 T40/SW13
SXR 10 x 100 FUS 046342 ■ 50 £474.29 G19 10 110 50 100 50 T40/SW13
SXR 10 x 120 FUS 046343 ■ 50 £539.73 G19 10 130 50 120 70 T40/SW13
SXR 10 x 140 FUS 046344 ■ 50 £613.37 G19 10 150 50 140 90 T40/SW13
SXR 10 x 160 FUS 046345 ■ 50 £750.03 G19 10 170 50 160 110 T40/SW13
SXR 10 x 180 FUS 046361 ■ 50 £958.38 G19 10 190 50 180 130 T40/SW13
SXR 10 x 200 FUS 046362 ■ 50 £1,237.57 G19 10 210 50 200 150 SW13
SXR 10 x 230 FUS 046363 ■ 50 £1,550.06 G19 10 240 50 230 180 SW13
SXR 10 x 260 FUS 046364 ■ 50 £2,004.28 G19 10 270 50 260 210 SW13
TORXSXR-FUS - with hexagon safety screw, integral washer and T40 internal drive
44 FRAME FIXINGS
ADT Cover CAP
Items to order onlySales Unit £ Price per
100 piecesDiscount
groupColour cap Cap
diameterTo fit safety screws
-Bit with T 40
Item Art.-No. [pcs] [Ø mm] [mm]
ADT 15 W 60326 100 £15.58 G17 White 15 7ADT 15 DB 60329 100 £17.41 G17 Dark Brown 15 7ADT 18 W 60334 100 £18.59 G17 White 18 10ADT 18 DB 60334 100 £11.41 G17 Dark Brown 18 10
SXRL T
Items to order onlyzinc-plated
steelgvz
Sales unit
£ Price per 100 pieces
Discount group
Drill hole diameter
Min. drill-hole depth for through fixings
Min. embedment depth
Anchor length
Max. usable length 70mm /
90mm
Screw diameter x
lengthItem Art.-No. ETA [pcs] [mm] [mm] [mm] [mm] [mm] [mm]
SXRL 10 x 80T 522698 ■ 50 £77.33 G22 10 80/100 70 80 10 7x87SXRL 10 x 100T 522699 ■ 50 £91.26 G22 10 80/100 70/90 100 30/10 7x107SXRL 10 x 120T 522700 ■ 50 £126.36 G22 10 80/100 70/90 120 50/30 7x127SXRL 10 x 140T 522701 ■ 50 £170.55 G22 10 80/100 70/90 140 70/50 7x147SXRL 10 x 160T 522703 ■ 50 £108.81 G22 10 80/100 70/90 160 90/70 7x167SXRL 10 x 180T 522704 ■ 50 £224.79 G22 10 80/100 70/90 180 110/90 7x187SXRL 10 x 200T 522705 ■ 50 £324.50 G22 10 80/100 70/90 200 130/110 7x207SXRL 10 x 230T 522706 ■ 50 £463.48 G22 10 80/100 70/90 230 160/140 7x237SXRL 10 x 260T 522707 ■ 50 £639.15 G22 10 80/100 70/90 260 190/170 7x267SXRL 10 x 290T 522708 ■ 50 £672.45 G22 10 80/100 70/90 290 220/200 7x297
TORXSXRL T with fischer safety screw
SXRL T A4
Items to order onlyStainless
steelA4
Sales unit
£ Price per 100 pieces
Discount group
Drill hole diameter
Min. drill-hole depth for through fixings
Min. embedment depth
Anchor length
Max. fixture thickness
Screw diameter x
lengthItem Art.-No. ETA [pcs] [mm] [mm] [mm] [mm] [mm] [mm]
SXRL 10 x 80T 522709 ■ 50 £282.16 G22 10 80/100 70 80 10 7x87SXRL 10 x 100T 522710 ■ 50 £313.57 G22 10 80/100 70/90 100 30/10 7x107SXRL 10 x 120T 522711 ■ 50 £376.15 G22 10 80/100 70/90 120 50/30 7x127SXRL 10 x 140T 522712 ■ 50 £438.91 G22 10 80/100 70/90 140 70/50 7x147SXRL 10 x 160T 522713 ■ 50 £532.96 G22 10 80/100 70/90 160 90/70 7x167SXRL 10 x 180T 522714 ■ 50 £658.37 G22 10 80/100 70/90 180 110/90 7x187SXRL 10 x 200T 522715 ■ 50 £862.18 G22 10 80/100 70/90 200 130/110 7x207SXRL 10 x 230T 522716 ■ 50 £1,128.57 G22 10 80/100 70/90 230 160/140 7x237SXRL 10 x 260T 522717 ■ 50 £1,426.43 G22 10 80/100 70/90 260 190/170 7x267SXRL 10 x 290T 522718 ■ 50 £1,501.14 G22 10 80/100 70/90 290 220/200 7x297
TORXSXRL T A4 with fischer safety screw
ETA-13/0235ETAG 020 Part 2, 3, 4
Multiple fixings fornon-structural applications
in concrete and masonry
for facade systemssee ETA
ETA-13/0235ETAG 020 Part 2, 3, 4
Multiple fixings fornon-structural applications
in concrete and masonry
for facade systemssee ETA
45
For full product details please refer to the Main Catalogue Section
SXRL FUS
Items to order onlyzinc-plated
steelgvz
Sales unit
£ Price per 100 pieces
Discount group
Drill hole diameter
Min. drill-hole depth for through fixings
Min. embedment depth
Anchor length
Max. fixture thickness
Screw diameter x
lengthItem Art.-No. ETA [pcs] [mm] [mm] [mm] [mm] [mm] [mm]
SXRL 10 x 80FUS 522719 ■ 50 £87.67 G22 10 80/100 70 80 10 7x87SXRL 10 x 100FUS 522720 ■ 50 £102.27 G22 10 80/100 70/90 100 30/10 7x107SXRL 10 x 120FUS 522721 ■ 50 £125.67 G22 10 80/100 70/90 120 50/30 7x127SXRL 10 x 140FUS 522723 ■ 50 £146.30 G22 10 80/100 70/90 140 70/50 7x147SXRL 10 x 160FUS 522724 ■ 50 £175.34 G22 10 80/100 70/90 160 90/70 7x167SXRL 10 x 180FUS 522725 ■ 50 £204.55 G22 10 80/100 70/90 180 110/90 7x187SXRL 10 x 200FUS 522726 ■ 50 £289.34 G22 10 80/100 70/90 200 130/110 7x207SXRL 10 x 230FUS 522727 ■ 50 £413.78 G22 10 80/100 70/90 230 160/140 7x237SXRL 10 x 260FUS 522728 ■ 50 £474.33 G22 10 80/100 70/90 260 190/170 7x267SXRL 10 x 290FUS 522729 ■ 50 £527.62 G22 10 80/100 70/90 290 220/200 7x297
FRAME FIXINGS
FUR - T
Items to order onlyzinc-plated
steelSales unit
£ Price per 100 pieces
Discount group
Drill hole diameter
Min. drill-hole depth for through fixings
Min. embedment depth
Anchor length
Max. fixture thickness
Drive
Item Art.-No. [pcs] [mm] [mm] [mm] [mm] [mm]
FUR 8 x 80 T 070110 50 £119.38 G22 8 90 70 80 10 T30FUR 8 x 100 T 070111 50 £143.09 G22 8 110 70 100 30 T30FUR 8 x 120 T 070112 50 £156.74 G22 8 130 70 120 50 T30FUR 10 x 80 T 088756 50 £140.20 G22 10 90 70 80 10 T40FUR 10 x 100 T 088757 50 £154.45 G22 10 110 70 100 30 T40FUR 10 x 115 T 088760 50 £177.02 G22 10 125 70 115 45 T40FUR 10 x 135 T 088758 50 £220.93 G22 10 145 70 135 65 T40FUR 10 x 160 T 088759 50 £293.20 G22 10 170 70 160 90 T40FUR 10 x 185 T 088761 50 £369.67 G22 10 195 70 185 115 T40FUR 10 x 200 T 088764 50 £462.43 G22 10 210 70 200 130 T40FUR 10 x 230 T 088762 50 £549.50 G22 10 240 70 230 160 T40
TORXFUR-T - safety screw with countersunk head
SXRL FUS A4
Items to order onlyzinc-plated
steelA4
Sales unit
£ Price per 100 pieces
Discount group
Drill hole diameter
Min. drill-hole depth for through fixings
Min. embedment depth
Anchor length
Max. fixture thickness
Screw diameter x length
Item Art.-No. ETA [pcs] [mm] [mm] [mm] [mm] [mm] [mm]
SXRL 10 x 80FUS 522730 ■ 50 £319.74 G22 10 80/100 70 80 10 7x87SXRL 10 x 100FUS 522731 ■ 50 £363.62 G22 10 80/100 70/90 100 30/10 7x107SXRL 10 x 120FUS 522732 ■ 50 £413.80 G22 10 80/100 70/90 120 50/30 7x127SXRL 10 x 140FUS 522733 ■ 50 £490.01 G22 10 80/100 70/90 140 70/50 7x147SXRL 10 x 160FUS 522734 ■ 50 £654.73 G22 10 80/100 70/90 160 90/70 7x167SXRL 10 x 180FUS 522735 ■ 50 £734.75 G22 10 80/100 70/90 180 110/90 7x187SXRL 10 x 200FUS 522736 ■ 50 £948.84 G22 10 80/100 70/90 200 130/110 7x207SXRL 10 x 230FUS 522737 ■ 50 £1,096.99 G22 10 80/100 70/90 230 160/140 7x237SXRL 10 x 260FUS 522738 ■ 50 £1,385.67 G22 10 80/100 70/90 260 190/170 7x267SXRL 10 x 290FUS 522739 ■ 50 £1,558.88 G22 10 80/100 70/90 290 220/200 7x297
TORXSXRL FUS with fischer safety screw ETA-13/0235
ETAG 020 Part 2, 3, 4
Multiple fixings fornon-structural applications
in concrete and masonry
for facade systemssee ETA
ETA-13/0235ETAG 020 Part 2, 3, 4
Multiple fixings fornon-structural applications
in concrete and masonry
for facade systemssee ETA
TORXSXRL FUS - with hexagon safety screw, integral washer and T40 internal drive
46
FUR 8 SS / FUR 10 SS
Items to order onlyzinc-plated
steelSales unit
£ Price per 100 pieces
Discount group
Drill hole diameter
Min. drill-hole depth for through fixings
Min. embedment depth
Anchor length
Max. fixture thickness
Width across nut
Item Art.-No. [pcs] [mm] [mm] [mm] [mm] [mm] [mm]
FUR 8 x 80 SS 070130 50 £127.50 G22 8 90 70 80 10 10FUR 8 x 100 SS 070131 50 £152.81 G22 8 110 70 100 30 10FUR 8 x 120 SS 070132 50 £167.40 G22 8 130 70 120 50 10FUR 10 x 80 SS 088776 50 £149.72 G22 10 90 70 80 10 13FUR 10 x 100 SS 088777 50 £168.65 G22 10 110 70 100 30 13FUR 10 x 115 SS 088783 50 £177.02 G22 10 125 70 115 45 13FUR 10 x 135 SS 088778 50 £220.93 G22 10 145 70 135 65 13FUR 10 x 160 SS 088779 50 £340.50 G22 10 170 70 160 90 13FUR 10 x 185 SS 088780 50 £369.67 G22 10 195 70 185 115 13FUR 10 x 200 SS 088781 50 £462.43 G22 10 210 70 200 130 13FUR 10 x 230 SS 088782 50 £549.50 G22 10 240 70 230 160 13
FUR 8-SS / FUR 10-SS safety screw with Hexagon head
SXS - T
Items to order onlyzinc-plated
steelSales unit
£ Price per 100 pieces
Discount group
Drill hole diameter
Min. embedment depth
Anchor length Max. fixture thickness
Min. drill hole depth
Drive
Item Art.-No. ETA [pcs] [mm] [mm] [mm] [mm] [mm]
SXS 10 x 80 T 019601 ■ 50 £129.41 G19 10 50 80 30 90 T40SXS 10 x 100 T 019604 ■ 50 £131.30 G19 10 50 100 50 110 T40SXS 10 x 120 T 019616 ■ 50 £178.35 G19 10 50 120 70 130 T40SXS 10 x 140 T 019621 ■ 50 £190.44 G19 10 50 140 90 150 T40SXS 10 x 160 T 024076 ■ 50 £275.05 G19 10 50 160 110 170 T40SXS 10 x 180 T 024080 ■ 50 £330.15 G19 10 50 180 130 190 T40Stainless steel A4SXS 10 x 80 T 019602 ■ 50 £448.18 G19 10 50 80 30 90 T40SXS 10 x 100 T 019605 ■ 50 £516.25 G19 10 50 100 50 110 T40SXS 10 x 120 T 019617 ■ 50 £649.56 G19 10 50 120 70 130 T40SXS 10 x 140 T 019623 ■ 50 £795.74 G19 10 50 140 90 150 T40SXS 10 x 160 T 024077 ■ 50 £896.28 G19 10 50 160 110 170 T40SXS 10 x 180 T 024082 ■ 50 £1,029.51 G19 10 50 180 130 190 T40
TORXSXS-T - with CO-NA screw and countersunk head
SXS FUS / A4
Items to order onlyzinc-plated
steelSales unit
£ Price per 100 pieces
Discount group
Drill hole diameter
Min. embedment depth
Anchor length
Max. fixture thickness
Min. Drill hole depth
Width across nut
Item Art.-No. ETA [pcs] [mm] [mm] [mm] [mm] [mm] [mm]
SXS 10 x 60 F US 019599 1) ■ 50 £170.75 G19 10 50 60 10 70 13SXS 10 x 80 F US 019603 1) ■ 50 £234.28 G19 10 50 80 30 90 13SXS 10 x 100 F US 019614 1) ■ 50 £236.97 G19 10 50 100 50 110 13SXS 10 x 120 F US 019619 1) ■ 50 £283.62 G19 10 50 120 70 130 13SXS 10 x 140 F US 019624 1) ■ 50 £288.99 G19 10 50 140 90 150 13SXS 10 x 160 F US 024045 1) ■ 50 £397.37 G19 10 50 160 110 170 13SXS 10 x 180 F US 024046 1) ■ 50 £520.63 G19 10 50 180 130 190 13Stainless Steel A4SXS 10 x 60 F US 019600 1) ■ 50 £404.37 G19 10 50 60 10 70 13SXS 10 x 80 F US 019628 1) ■ 50 £480.64 G19 10 50 80 30 90 13SXS 10 x 100 F US 019615 1) ■ 50 £548.87 G19 10 50 100 50 110 13SXS 10 x 120 F US 019620 1) ■ 50 £682.18 G19 10 50 120 70 130 13SXS 10 x 140 F US 019626 1) ■ 50 £831.33 G19 10 50 140 90 150 13SXS 10 x 160 F US 024062 1) ■ 50 £932.04 G19 10 50 160 110 170 13SXS 10 x 180 F US 024063 1) ■ 50 £1,055.54 G19 10 50 180 130 190 131) Collar: Ø 18 x 2 mm, CO-NA hexagon-head screw with integrated washer and additional - T40 integrated into the hexagon head.
TORXSXS-F US with CO-NA hex. headscrew plus integrated washer. Drive T40
FRAME FIXINGS
47
For full product details please refer to the Main Catalogue Section
VBS-M Remedial wall tie
Items to order onlyzinc-plated
steelSales unit
£ Price per 100 pieces
Discount group
Nominal drill hole diameter
drill hole depth
Max outer wall distance at 115 mm
facing masonry, flush
Max outer wall distance at 115 mm facing masonry,
20mm countersunk
Effectiveanchorage
depth
Anchor length
Item Art.-No. [pcs] [mm] [mm] [mm] [mm] [mm] [mm]
VBS-M 8 x 120 514243 100 £356.19 G17 8 140 20 - ≥ 50 120VBS-M 8 x 185 514244 100 £377.58 G17 8 205 20 40 ≥ 50 185VBS-M 8 x 205 514245 100 £391.84 G17 8 225 40 60 ≥ 50 205VBS-M 8 x 225 514246 100 £413.23 G17 8 245 60 80 ≥ 50 225VBS-M 8 x 245 514247 100 £448.87 G17 8 265 80 100 ≥ 50 245VBS-M 8 x 265 514248 100 £470.26 G17 8 285 100 120 ≥ 50 265VBS-M 8 x 285 514249 100 £491.56 G17 8 305 120 140 ≥ 50 285Stainless steel A4VBS-M 8 x 120 514236 100 £491.56 G17 8 140 20 - ≥ 50 120VBS-M 8 x 185 514237 100 £532.59 G17 8 205 20 40 ≥ 50 185VBS-M 8 x 205 514238 100 £565.28 G17 8 225 40 60 ≥ 50 205VBS-M 8 x 225 514239 100 £606.23 G17 8 245 60 80 ≥ 50 225VBS-M 8 x 245 514240 100 £647.27 G17 8 265 80 100 ≥ 50 245VBS-M 8 x 265 514241 100 £688.22 G17 8 285 100 120 ≥ 50 265VBS-M 8 x 285 514242 100 £737.34 G17 8 305 120 140 ≥ 50 285Please call for availability and delivery times
According to E DIN EN 845-1:2010-02
fischerwerke GmbH & Co. KGWeinhalde 14-18, 72178 Waldachtal
12
EN 845-1Remedial wall-tie
Type. VBS-MFor facade refurbishment of double shell masonry
CE-mark according toEuropean standard EN 845-1
SRS Frame fixing
zinc-plated steel
Sales unit
£ Price per 100 pieces
Discount group
Drill Fixing length
Max. usable length Pozi size
Item Art.-No. [pcs] [mm] [mm] [mm] [mm]
S8 RS 80 Z 42543 25 £35.35 G17 8 80 30 PZ 3S8 RS 100 Z 42544 50 £39.50 G17 8 100 50 PZ 3S8 RS 120 Z 42549 50 £46.59 G17 8 120 70 PZ 3S10 RS 80 Z 47927 50 £58.29 G17 10 80 30 PZ 4
S10 RS 100 Z 42546 50 £59.55 G17 10 100 50 PZ 4S10 RS 120 Z 42547 50 £61.41 G17 10 120 70 PZ 4S10 RS 135 Z 42548 50 £74.76 G17 10 135 85 PZ 4S10 RS 160 Z 47928 50 £82.27 G17 10 160 110 PZ 4
S10 J 75 S Adjustable frame fixing
Items to order onlyzinc-plated
steelSales unit
£ Price per 100 pieces
Discount group
Drill Fixing length
Screw size
Max. frame thickness
Max. adjustment
Item Art.-No. [pcs] [mm] [mm] [mm] [mm] [mm]
S 10 J 75 S 80710 50 £277.60 G17 10 75 6 x 110 25 30
FRAME FIXINGS
48 FRAME FIXINGS
N Hammerfix / N A2
Items to order onlyzinc-plated
steelSales unit
£ Price per 100 pieces
Discount group
Drill hole diameter
Effect. anchoring depth
Anchor length
Min. drill-hole depth for through
fixings
Max. fixture thickness
Item Art.-No. [pcs] [mm] [mm] [mm] [mm] [mm]
N 5 x 30 Z 050395 100 £20.27 G23 5 25 30 45 5N 5 x 40 Z 050351 100 £21.87 G23 5 25 40 55 15N 5 x 50 Z 050352 100 £22.24 G23 5 25 50 65 25N 6 x 40 Z 050354 100 £24.33 G23 6 30 40 55 10N 6 x 60 Z 050355 100 £35.52 G23 6 30 60 75 30N 6 x 80 Z 050353 100 £45.52 G23 6 30 80 95 50N 8 x 60 Z 050356 100 £37.56 G23 8 40 60 75 20N 8 x 80 Z 050358 100 £44.24 G23 8 40 80 95 40N 8 x 100 Z 050357 100 £55.86 G23 8 40 100 115 60N 8 x 120 Z 050359 100 £70.68 G23 8 40 120 135 80N 10 x 100 Z 050346 1) 50 £87.06 G24 10 50 100 115 50N 10 x 135 Z 050347 1) 50 £110.49 G24 10 50 135 150 85N 10 x 160 Z 050348 1) 50 £165.35 G24 10 50 160 175 110N 10 x 230 Z 050335 1) 50 £298.29 G24 10 50 230 245 180Stainless steelN 5 x 30 Z / A2 050370 2) 100 £55.00 G24 5 25 30 45 5N 6 x 40 Z A2 050372 50 £54.63 G24 6 30 40 55 10N 6 x 60 Z A2 050373 50 £56.84 G24 6 30 60 75 30N 8 x 60 Z A2 050374 50 £74.06 G24 8 40 60 75 20N 8 x 80 Z A2 050375 50 £91.17 G24 8 40 80 95 40N 8 x 100 Z A2 050376 50 £139.91 G24 8 40 100 115 601) Not pre-assembled
2) Also suitable for fischer Pipe clips FC, see section Electrical Fixings.
Hammerfix N-Z-A2 with stainless steel A2 nail, pre-assembled
Hammerfix N-Z with nail, pre-assembled
N Hammerfix FZ / A2
Items to order onlyzinc
plated steelSales unit
£ Price per 100 pieces
Discount group
Drill hole diameter
Effect. anchoring depth
Anchor length
Min. drill-hole depth for through
fixings
Max. fixture thickness
Item Art.-No. [pcs] [mm] [mm] [mm] [mm] [mm]
N 5 x 30 FZ 050338 100 £21.39 G24 5 25 30 45 5N 6 x 30 FZ 050341 200 £25.68 G24 6 27 30 45 0,5N 6 x 40 FZ 048795 100 £26.14 G24 6 30 40 55 7N 8 x 40 FZ 015903 50 £39.88 G24 8 40 40 55 0,5Stainless Steel A2N 6 x 40 FZ A2 050369 50 £57.36 G24 6 30 40 55 7
N-FZ - with flat edge and nail and crossdrive recess Z (N 5 x 30 FZ)
N-FZ - with flat edge and nail and crossdrive recess Z (N 6 x 40 FZ)
49
For full product details please refer to the Main Catalogue Section
N - FN / D-A2 / N-MHammerfix N-FN with flat edge and plastic nail, pre-assembled
Hammerfix N-D A2 with isolating washer and nail, pre-assembled
N-M - with zinc-plated nail and connection thread M6 / M8
Items to order onlySales unit
£ Price per 100 pieces
Discount group
Drill hole diameter
Effect. anchoring depth
Anchor length
Max. fixture thickness
Min. drill-hole depth for through fixings
Washer
Item Art.-No. [pcs] [mm] [mm] [mm] [mm] [mm] [Ø mm]
N 6 x 40 FN 050342 50 £26.16 G24 6 30 40 7 55 —N 6 x 40 M6 050398 50 £63.31 G24 6 30 40 10 55 —N 6 x 40 D A2 050367 50 £158.20 G24 6 30 40 10 55 19N 6 x 60 D A2 050368 50 £169.16 G24 6 30 60 30 75 19
FRAME FIXINGS
F10 M Window fixings
Items to order onlySales unit
£ Price100 pieces
Discount group
Drill hole diameter
Min. drill hole depth for through
fixings
Effect. anchoring
depth
Anchor length
Max. fixture thickness
Drive
Item Art.-No. [pcs] [mm] [mm] [mm] [mm] [mm]
F 10 M 72 088670 100 £88.84 G24 10 90 30 72 42 PH3F 10 M 92 088672 100 £100.79 G24 10 110 30 92 62 PH3F 10 M 112 088674 100 £111.41 G24 10 130 30 112 82 PH3F 10 M 132 088676 100 £123.35 G24 10 150 30 132 102 PH3F 10 M 152 088678 100 £133.78 G24 10 170 30 152 122 PH3F 10 M 182 088680 50 £159.64 G24 10 200 30 182 152 PH3F 10 M 202 061064 50 £192.83 G24 10 220 30 202 172 PH3
Cover cap
Art.-No.Sales unit
[pcs]£ Price
per 100 piecesDiscount
groupColour Cap height
[mm]Cap
[Ø mm]Fits
ADM 10 W 088688 100 £9.51 G24 white 4 15 F 10M
Cover cap ADM 10F 10 M - with countersunk screw and crossdrive recess Z 3
F-S Window fixings
Items to order onlySales unit
£ Price100 pieces
Discount group
Drill hole diameter
Effect. anchoring depth
Anchor length
Max. fixture thickness
Min. drill-hole depth for through fixings
Max. installation torque
Item Art.-No. [pcs] [mm] [mm] [mm] [mm] [mm] [Nm]
F 8 S 100 088635 50 £94.47 G24 8 40 100 50 115 3F 8 S 120 088636 50 £131.42 G24 8 40 120 70 135 3F 8 S 140 088637 50 £135.53 G24 8 40 140 90 155 3F 10 S 75 088625 50 £175.90 G24 10 50 75 15 90 6F 10 S 100 088626 50 £180.35 G24 10 50 100 40 115 6F 10 S 120 088627 50 £193.46 G24 10 50 120 60 135 6F 10 S 140 088628 50 £240.79 G24 10 50 140 80 155 6F 10 S 165 088629 50 £348.12 G24 10 50 165 105 180 6Cover cap
Item Art.-No.Sales unit
[pcs]£ Price
per 100 piecesDiscount
groupDiameter [mm] Colour
ADF 12W white 060275 100 £40.93 G25 12 white
Cover cap ADFF-S - with zinc-plated countersunk screw and cross-drive recess Z 3
50 FRAME FIXINGS
TL Window Frame fixing
Sales unit
£ Price100 pieces
Discount group
Drill hole diameter
Effect. anchoring depth
Anchor length
Max. fixture thickness
Min. drill-hole depth for through
fixings
Max. installation torque
Item Art.-No. [pcs] [mm] [mm] [mm] [mm] [mm] [Nm]
TL 8x100 42559 50 £43.89 G27 8 40 100 50 115 3TL 8x120 42565 50 £48.30 G27 8 40 120 70 135 3TL 8x140 42560 50 £51.89 G27 8 40 140 90 155 3TL 10x75 42561 50 £57.96 G27 10 50 75 15 90 6TL 10x100 42562 50 £72.78 G27 10 50 100 40 115 6TL 10x120 42563 50 £93.33 G27 10 50 120 60 135 6TL 10x140 42564 50 £107.15 G27 10 50 140 80 155 6
ADF Cover cap sold separately
Cover cap ADFF-S - with zinc-plated countersunk screw and cross-drive recess Z 3
FFS Window & Door frame fixings
Items to order onlySales unit
£ Price100 pieces
Discount group
Drill hole diameter
Screw length
Drive Head
Item Art.-No. [pcs] [mm] [mm] [Ø mm]
FFS 7,5 x 42 062379 100 £24.80 G25 6 42 T30 11,5FFS 7,5 x 52 062395 100 £31.24 G25 6 52 T30 11,5FFS 7,5 x 62 062396 100 £35.98 G25 6 62 T30 11,5FFS 7,5 x 72 061550 100 £35.58 G25 6 72 T30 11,5FFS 7,5 x 82 068955 100 £40.24 G25 6 82 T30 11,5FFS 7,5 x 92 061551 100 £43.46 G25 6 92 T30 11,5FFS 7,5 x 102 068956 100 £51.86 G25 6 102 T30 11,5FFS 7,5 x 112 061552 100 £58.82 G25 6 112 T30 11,5FFS 7,5 x 122 068957 100 £67.68 G25 6 122 T30 11,5FFS 7,5 x 132 061553 100 £78.22 G25 6 132 T30 11,5FFS 7,5 x 152 061554 100 £97.78 G25 6 152 T30 11,5FFS 7,5 x 182 061555 100 £108.63 G25 6 182 T30 11,5FFS 7,5 x 202 068958 100 £149.19 G25 6 202 T30 11,5FFS 7,5 x 212 061556 100 £162.13 G25 6 212 T30 11,5Cover cap
Items to order only Sales unit[pcs]
£ Price per 100 pieces
Discount group
Cap [Ø mm]
Cap height [mm]
Fits
FFS A-W white 061560 100 £10.52 G25 15 4 FFS Flat head
Frame fixing screw FFS - with flat head
Cover cap FFS A-W
FFSZ Window & Door frame fixings
Items to order onlySales unit
£ Price100 pieces
Discount group
Drill hole diameter
Screw length
Drive Head
Item Art.-No. [pcs] [mm] [mm] [Ø mm]
FFSZ 7,5 x 52 T25 092695 100 £27.77 G25 6 52 T25 7,5FFSZ 7,5 x 62 T25 092697 100 £30.13 G25 6 62 T25 7,5FFSZ 7,5 x 72 T25 092698 100 £36.30 G25 6 72 T25 7,5FFSZ 7,5 x 82 T25 092699 100 £39.30 G25 6 82 T25 7,5FFSZ 7,5 x 92 T25 092700 100 £47.43 G25 6 92 T25 7,5FFSZ 7,5 x 102 T25 092701 100 £54.73 G25 6 102 T25 7,5FFSZ 7,5 x 112 T25 092702 100 £59.96 G25 6 112 T25 7,5FFSZ 7,5 x 122 T25 092703 100 £65.95 G25 6 122 T25 7,5FFSZ 7,5 x 132 T25 092704 100 £83.09 G25 6 132 T25 7,5FFSZ 7,5 x 152 T25 092705 100 £99.61 G25 6 152 T25 7,5FFSZ 7,5 x 182 T25 092706 100 £108.63 G25 6 182 T25 7,5FFSZ 7,5 x 212 T25 092709 100 £205.72 G25 6 212 T25 7,5
Frame fixing screw FFSZ - with cylinder head
51
For full product details please refer to the Main Catalogue Section
UX Universal Plug
Items to order onlyWithout
rimSales unit
£ Price100 pieces
Discount group
Drill hole diameter
Min. drill hole depth
Min. panel thickness
Anchor length
Wood and chipboard
screws
Max. fixture thickness
Item Art.-No. [pcs] [mm] [mm] [mm] [mm] [mm] [mm]
UX 5 x 30 094721 100 £7.10 G12 5 40 9,5 30 3 - 4 —UX 6 x 35 062754 100 £9.97 G12 6 45 9,5 35 4 - 5 —UX 6 x 50 072094 100 £10.19 G12 6 60 9,5 50 4 - 5 —UX 8 x 50 077869 100 £17.94 G12 8 60 9,5 50 4,5 - 6 —UX 10 x 60 077871 50 £30.55 G12 10 75 12,5 60 6 - 8 —UX 12 x 70 062758 25 £38.52 G12 12 85 — 70 8 - 10 —UX 14 x 75 062757 20 £60.35 G12 14 95 — 75 10 - 12 —With rimUX 5 x 30 094722 100 £7.10 G12 5 40 9,5 30 3 - 4 —UX 6 x 35 062756 100 £10.26 G12 6 45 9,5 35 4 - 5 —UX 6 x 50 072095 100 £10.41 G12 6 60 9,5 50 4 - 5 —UX 8 x 40 505483 100 £13.78 G12 8 50 9,5 40 4,5 - 6 —UX 8 x 50 077870 100 £18.37 G12 8 60 9,5 50 4,5 - 6 —UX 10 x 60 077872 50 £30.63 G12 10 75 12,5 60 6 - 8 —With rim and screwUX 6 x 35 094758 25 £35.58 G12 6 60 9,5 35 4,5 x 60 20UX 6 x 50 094759 25 £47.08 G12 6 75 9,5 50 4,5 x 75 20UX 8 x 50 094762 25 £48.65 G12 8 70 9,5 50 5 x 70 15UX 8 x 50 094760 25 £62.86 G12 8 80 9,5 50 5 x 80 25UX 10 x 60 094761 10 £117.91 G12 10 85 12,5 60 6 x 85 20
UX - without rim UX R - with rim
SX High Performance Plug
Items to order onlyWith rim Sales
unit£ Price
100 piecesDiscount
groupDrill hole diameter
Min. drill hole depth
Anchor length
Max. fixture thickness
Wood and chipboard
screwsItem Art.-No. [pcs] [mm] [mm] [mm] [mm] [mm]
SX 4 x 20 070004 200 £4.48 G11 4 25 20 — 2 - 3SX 5 x 25 070005 100 £5.11 G11 5 35 25 — 3 - 4SX 6 x 30 070006 100 £9.41 G11 6 40 30 — 4 - 5SX 6 x 50 078185 100 £15.50 G11 6 60 50 — 4 - 5SX 8 x 40 070008 100 £16.27 G11 8 50 40 — 4,5 - 6SX 10 x 50 070010 50 £24.32 G11 10 70 50 — 6 - 8SX 12 x 60 070012 25 £32.14 G11 12 80 60 — 8 - 10SX 14 x 70 070014 20 £59.73 G11 14 90 70 — 10 - 12SX 16 x 80 070016 10 £88.67 G11 16 100 80 — 12 (1/2")Without rim, greater anchorage depthSX 6 x 50 024827 100 £15.15 G11 6 60 50 — 4 - 5SX 8 x 65 024828 50 £25.81 G11 8 75 65 — 4,5 - 6SX 10 x 80 024829 25 £45.71 G11 10 95 80 — 6 - 8With rim and screwSX 6 x 30 070021 50 £28.37 G11 6 40 30 10 4,5 x 40SX 8 x 40 070022 50 £42.41 G11 8 50 40 20 5 x 60
SX Plug with rim SX Plug with greater anchorage depth, without rim
SX Plug with rim and screw
GENERAL FIXINGS
UX R S - with rim and screw
52
S Plug
Items to order onlySales unit
£ Price100 pieces
Discount group
Min. drill hole depth
Wood and chipboard screws
Item Art.-No. [pcs] [mm] [mm]
S 4 050104 200 £5.20 G10 25 2 - 3S 5 050105 100 £5.38 G10 35 3 - 4S 6 050106 100 £9.12 G10 40 4 - 5S 7 056106 £11.24 G10S 8 050108 100 £12.93 G10 55 4,5 - 5S 10 050110 50 £21.42 G10 70 6 - 8S 12 050112 25 £30.49 G10 80 8 - 10S 14 050114 20 £57.20 G10 90 10 - 12S 16 050116 10 £103.60 G10 100 12 (1/2")S 20 050120 5 £212.89 G10 120 16Also available in bulk packs - please ask for details
Plug S
MS Plug
Items to order onlySales unit
£ Price100 pieces
Discount group
Drill hole diameter
Min. drill hole depth
Anchor length
Thread
Item Art.-No. [pcs] [mm] [mm] [mm] M 6 S 050152 100 £17.74 G10 8 55 40 M 6M 8 S 050153 50 £30.75 G10 10 70 50 M 8M 10 S 050154 20 £78.11 G10 14 90 70 M 10M 12 S 050155 10 £104.19 G10 16 100 80 M 12
M-S for metric screws
W Plastic wallplug
Pcs per strip
Min. orderstrip per box
£ Price per box
Discount group
Drill dia. Min. drill hole depth
Plug length Wood or fischer safety screw min / max [Ø mm]
Total qty pcs
Item [mm] [mm] [mm]
WR40C - Red 42534 40 25 £3.35 G13 6 45 30 4 - 5 1,000WB40C - Brown 94791 40 25 £3.57 G13 8 55 40 4.5 - 6 1,000WY100C - Yellow 42527 100 10 £5.15 G13 5 35 25 3 - 4 1,000WR100C - Red 42528 100 10 £6.28 G13 6 45 30 4 - 5 1,000WB100C - Brown 94787 100 10 £6.82 G13 7 55 40 4.5 - 6 1,000WR300 - Red 42531 300 5 £15.94 G13 6 45 30 4 - 5 1,500WB300 - Brown 94788 300 5 £17.76 G13 7 55 40 4.5 - 6 1,500WM200 - Mixed 42526 200 10 £11.13 G13 5, 6, 7 35, 45, 55 various 4 - 6 2,000
CP Contract Plastic wallplug
Pcs per box
Boxes per pack
£ priceper 100 pcs
Discount group
Drill Min. drill hole depth
Plug length Wood or fischer safety screw min / max [Ø mm]
Total qty pcs
Item Art.-No. [mm] [mm] [mm]
WR1000CP - Red 42540 100 100 £1.66 G13 6 45 30 4 - 5 10,000WY1000CP - Yellow 503095 100 100 £1.40 G13 5 35 25 3-4 10,000WB100OCP - Brown 42541 100 100 £1.92 G13 7 55 40 4.5-6 10,000
GENERAL FIXINGS
53
For full product details please refer to the Main Catalogue Section
GENERAL FIXINGS
M Expansion Unit
Items to order onlySales unit
£ Price per100 pieces
Discount group
Drill hole diameter
Min. drill hole depth
Anchor length
Thread Max. installation torque
Item [pcs] [mm] [mm] [mm] [Nm]
M 5 050505 1) 50 £265.35 G15 10 45 35 M 5 4M 6 050506 1) 50 £294.22 G15 12 50 40 M 6 7M 8 050508 1) 20 £325.25 G15 16 65 50 M 8 16M 10 050510 1) 10 £389.62 G15 20 80 60 M 10 32M 12 050512 1) 5 £624.61 G15 24 90 65 M 12 541) The given torque values apply to screws of strength class ≥ 5.8.
M Expansion unit for metric screws
WLL Fixing set
Item to order onlySales unit
£ Price per 100 sets
Discount group
Contents per box
Art.-No. [pcs]
WLL 7 x 60 42919 50 £125.51 G13 50 x S10 Wallplugs, Hex coach screws 7x60, washers - zinc plated & fixing instructions
WLL 8 x 70 42920 50 £79.21 G13 50 x S10 Wallplugs, Hex coach screws 8x70, washers - zinc plated & fixing instructions
WLL 10 x 70 42921 50 £98.01 G13 50 x S12 Wallplugs, Hex coach screws 10x70, washers - zinc plated & fixing instructions
Wet N Fix
Items to order onlySales unit
£ Price per 100 pieces
Discount group
Contents
Item Art.-No. [pcs]
Wet N Fix Pack 42760 1 £5.67 G61 Bag with 10 x Wet N Fix re-order packs Display Box 42759 1 £7.33 G61 Display box with 40 x Wet N Fix packs
Wet N Fix Repair pads for damaged holes
PA Brass anchor
Items to order onlySales unit
£ Price per100 pieces
Discount group
Drill hole diameter
Min. drill hole depth
Anchor length
Thread Bolt penetration
Effect. anchoring depth
Item Art.-No. [pcs] [mm] [mm] [mm] [mm] [mm]
PA 4 M 6/7,5 050484 1) 200 £111.62 G79 8 7,5 7.5 M 6 7,5 7,5PA 4 M 6/10,5 058484 1) 100 £118.19 G79 8 10,5 10.5 M 6 10,5 10,5PA 4 M 6/13,5 059484 1) 100 £147.16 G79 8 13,5 13.5 M 6 13,5 13,5PA 4 M 8/25 050485 1) 50 £190.65 G79 10 25 25 M 8 25 25PA 4 M 10/25 050486 1) 25 £209.28 G79 12 25 25 M 10 25 251) Values of drill hole diameter apply for hard building materials. For soft building materials the drill diameter needs to be reduced by 0.5 mm.
PA4 Brass fixing
54
FTP K Turbo aircrete anchor, Nylon
Items to order onlySales unit
£ Price per100 pieces
Discount group
Drill hole diameter
Min. drill hole depth
Anchor length
Woodscrew diameter
Metric screw
Min. bolt penetration
Max. bolt penetration
Item Art.-No. [pcs] [mm] [mm] [mm] [mm] [mm] [mm]
FTP K 4 078411 1) 25 £45.83 G14 8 - (10) 60 50 4 - 4,5 M 4 35 60FTP K 6 078412 1) 25 £65.68 G14 8 - (10) 60 50 5 - 6 M 5 - 6 40 60FTP K 8 078413 1) 25 £105.31 G14 10 - (12) 70 60 7 - 8 M 8 45 70FTP K 10 078414 1) 10 £144.53 G14 12 - (14) 80 70 9 - 10 M 8 - 10 50 801) Values in brackets for drill hole diameter apply for aerated concrete, compressive strength of 5,0 N/mm² or higher.
FTP K Turbo aircrete anchor
GB Aircrete anchor
Items to order onlySales unit
£ Price per100 pieces
Discount group
Drill hole diameter
Min. drill hole depth
Plug length = min. anchoring depth
fischer safety screw
Item Art.-No. [pcs] [mm] [mm] [mm] [mm]
GB 8 050491 25 £123.68 G14 8 60 50 5GB 10 050492 20 £155.66 G14 10 65 55 7GB 14 050493 10 £201.70 G14 14 90 75 10
GB Aircrete anchor
FPX-I internal threaded anchor for aerated concrete
Items to order onlySales unit
£ Price per100 pieces
Discount group
Drill diameter
Min. drill hole depthpre-positioned
Anchoringdepth
Anchor length
Item Art.-No. [pcs] [mm] [mm] [mm] [mm]
FPX M6 - I 519021 25 £348.63 G14 10 >80 70 4 - 4,5FPX M8 - I 519022 25 £353.40 G14 10 >80 70 5 - 6FPX M10 - I 519023 25 £358.18 G14 10 >80 70 7 - 8FPX M12 - I 519024 25 £377.28 G14 10 >80 70 9 - 101) Values in brackets for drill hole diameter apply for aerated concrete, compressive strength of 5,0 N/mm² or higher.
FPX Setting Tool
Items to order onlySales unit
£ Price per100 pieces
Discount group Suitable for
Item Art.-No. [pcs]
FPX M6 078411 10 £399.25 G14 FPX M6 - IFPX M8 - M12 078412 10 £399.25 G14 FPX M8 - I / FPX M10 - I / FPX M12 - I
Setting Tool FPX M6 Setting Tool FPX M8 - M12
AIRCRETE FIXINGS
ETA-12/0456
Metal anchor for use inautoclaved aerated conrete
55
For full product details please refer to the Main Catalogue Section
AIRCRETE FIXINGS
PBB Cone drill & PBZ Centring sleeve
Sales unit
£ price*1/100 Pieces
Discount group
Suitable for
Item Art.-No. [pcs]
PBB Cone Drill* 90634 1 £85.86 G59 Aerated concrete in conjunction with injection mortar FIS V, cone drill PBB, centring sleeve PBZ and threaded rod FIS A, RGM or FTRPBZ Sleeve 90671 10 £150.26 G59
PBB cone drill PBZ Centring sleeve
FTP Setting tools
Items to order onlySales unit
£ Price per 100 pieces
Discount group
Fits
Item Art.-No. [pcs]
FTP EK 4/6 090990 1 £30.83 G14 FTP K4 / FTP K6FTP EK 8 090991 1 £31.24 G14 FTP K8 FTP EK 10 090992 1 £31.65 G14 FTP K10FTP EM 6 078577 1 £27.60 G14 FTP M6 FTP EM 8 078578 1 £27.60 G14 FTP M8 FTP EM 10 078579 1 £27.60 G14 FTP M10
FTP EK Installation tool for FTP K FTP EM Installation Tool for FTP M
FTP M Turbo aircrete anchor, Metal
Items to order onlySales unit
£ Price per100 pieces
Discount group
Drill hole diameter
Min. drill hole depth
Anchor length
Woodscrew diameter
Metric screw
Min. bolt penetration
Max. bolt penetration
Item Art.-No. [pcs] [mm] [mm] [mm] [mm] [mm] [mm]
FTP M 4 078415 1) 25 £256.37 G14 8 - (10) 60 50 — M 6 15 20FTP M 6 078416 1) 25 £290.85 G14 10 - (12) 70 60 — M 8 20 25FTP M 8 078417 1) 25 £332.52 G14 12 - (14) 80 70 — M 10 25 301) Values in brackets for drill hole diameter apply for aerated concrete, compressive strength of 5,0 N/mm² or higher.
FTP M Turbo aircrete anchor
56
HM Metal cavity fixing
Items to order onlySales unit
£ Price per100 pieces
Discount group
Drill hole diameter
Min. drill hole depth
Anchor length
Screw Max. panel thickness
Max. fixture thickness
Item Art.-No. [pcs] [mm] [mm] [mm] [mm] [mm] [mm]
HM 4 x 32 S 519769 50 £43.79 G66 8 42 32 M 4 x 40 3 - 13 16HM 4 x 46 S 522432 50 £48.17 G66 8 56 46 M 4 x 52 5 - 18 23HM 4 x 59 S 519771 50 £54.16 G66 8 69 59 M 4 x 66 35 - 42 16HM 5 x 37 S 519772 50 £57.41 G66 10 47 37 M 5 x 45 6 - 15 19HM 5 x 52 S 519774 50 £67.79 G66 10 62 52 M 5 x 60 7 - 21 24HM 5 x 65 S 519775 50 £68.11 G66 10 75 65 M 5 x 73 20 - 34 24HM 6 x 37 S 519777 50 £134.65 G66 12 47 37 M 6 x 45 6 - 15 14HM 6 x 52 S 519778 50 £150.42 G66 12 62 52 M 6 x 60 10 - 21 24HM 6 x 65 S 519782 50 £161.04 G66 12 75 65 M 6 x 70 20 - 34 24HM 6 x 80 S 519779 50 £189.52 G66 12 90 80 M 6 x 88 38 - 50 24HM 8 x 55 SS 519783 1) 50 £233.95 G66 12 65 55 M 8 x 60 10 - 21 24HM 4 x 32 H 519780 50 £87.88 G66 8 42 32 — 3 - 13 —HM 5 x 65 H 519781 50 £162.15 G66 10 75 65 — 20 - 34 —1) With hexagon headed screw, assembly only by using the professional installation tool HM Z 1
HM-S with metric screw HM-SS with hexagon headed screw HM-H with angle hook
KT Spring toggle
Item to order onlySales unit
£ Price per100 pieces
Discount group
Drill hole diameter
Max. panel thickness
Min. cavity depth
Screw length
Item Art.-No. [pcs] [mm] [mm] [mm] [mm]
KT 3x50 S 42765 50 £37.51 G66 11 25 27 50KT 5x50 S 42766 50 £60.70 G66 14 25 27 50KT 6x75 S 42767 25 £86.17 G66 18 25 32 75
HM Z Setting tool
Sales unit
£ Price per 100 pieces
Discount group
Suitable for
Item Art.-No. [pcs]
HM Z 1 062320 1 £146.02 G66 For use with fischer HM cavity fixings rangeHM Z 2 062321 1 £44.87 G66 For use with fischer HM cavity fixings range
HM Z 1 - the professional installation tool HM Z 2 - Installation tool
CAVITY FIXINGS
57
For full product details please refer to the Main Catalogue Section
KD / KDH
Items to order onlySales unit
£ Price per 100 pieces
Discount group
Drill hole diameter
Max. panel thickness
Min. cavity depth
Anchor length
Thread
Item Art.-No. [pcs] [mm] [mm] [mm] [mm] [mm]
KD 3 080181 50 £183.33 G66 12 65 27 95 M 3 x 90KDH 3 080182 25 £193.98 G66 12 51 27 105 M 3 x 80KD 3 B 080192 10 £148.42 G66 12 65 27 95 M 3 x 90KD 4 080183 25 £209.99 G66 14 69 34 105 M 4 x 100KDH 4 080184 25 £212.05 G66 14 35 34 95 M 4 x 70KD 4 B 080193 10 £238.02 G66 14 69 34 105 M 4 x 100
KD 3 + 4 Spring toggle KDH 3 + 4 Spring toggle with hook
KD / KDH & KM Gravity toggles
Items to order onlySales unit
£ Price per 100 pieces
Discount group
Drill hole diameter
Max. panel thickness
Min. cavity depth
Anchor length
Thread
Item Art.-No. [pcs] [mm] [mm] [mm] [mm] [mm]
KD 5 080187 25 £235.00 G66 16 63 70 100 M 5 x 100KDH 5 080188 20 £272.43 G66 16 60 70 130 M 5 x 90KD 6 080185 25 £245.39 G66 16 63 70 100 M 6 x 100KDH 6 080186 20 £313.33 G66 16 60 70 130 M 6 x 100KD 8 080178 20 £327.44 G66 20 55 75 100 M 8 x 100KDH 8 080179 20 £390.00 G66 20 55 75 130 M 8 x 100KM 10 050326 25 £2,718.98 G66 30 90 140 240 M 10 x 180
KD 5 + 6 + 8 Gravity toggle KDH 5 + 6 + 8 Gravity toggle with hook KM 10 Gravity toggle
Plasterboard Fixings
Assorted self drill plasterboard fixings with screws. 1) PDM 100 2) PDM50 100 3) PDM 150 Tub 4) PDN 5) PDNSOrder No: Sales
unit£ Price per
per tub*/box**/ 100 piecesDiscount
groupMin. plasterboard
thickness Anchor length
Screw length
Item Art.-No. [pcs] [mm] [mm] [mm]
PDM 100, Box** (metal) 1) 42793 1 £30.65 G68 9 31 35PDM 150, Tub* (metal) 2) 42799 1 £50.57 G68 9 31 35PDN 100 (nylon) 3) 42795 100 £17.86 G68 9 29 35PDNS 200, Box** (nylon) 4) 505372 1 £41.81 G68 9 26 25
1) 3) 4) 2)
PD Board fixing
Items to order onlySales unit
£ Price per 100 pieces
Discount group
Drill hole diameter
Min. drill hole depth
Min. panel thickness
Anchor length
Chipboard screw
Max. fixture thickness
Item Art.-No. [pcs] [mm] [mm] [mm] [mm] [mm] [mm]
PD 8 024771 100 £42.84 G66 8 31 6 29 4 —PD 10 015935 100 £55.17 G66 10 30 7 28 5 —PD 12 015937 50 £66.04 G66 12 29 9 27 6 —PD 8 S 024772 1) 50 £90.37 G66 8 31 6 29 4 x 40 11PD 10 S 015936 1) 50 £118.11 G66 10 30 7 28 5 x 40 12PD 12 S 015938 1) 25 £146.58 G66 12 29 9 27 6 x 50 221) PD-S with chipboard screw.
PD Board fixing PD S - with chipboard screw
CAVITY FIXINGS
58
SF Plus LS Cable strap/ ES Single clamp / ZS twin clamp
Items to order onlySales unit
£ Price per 100 pieces
Discount group
Drill-hole Min. drill hole depth
Clamping range
Item Art.-No. [pcs] [Ø mm] [mm] [mm]
SF plus LS 3/13 058155 100 £51.43 G81 6 35 3 - 13SF plus LS 8/28 058156 100 £51.92 G81 6 50 8 - 28SF plus LS 20/40 058157 100 £71.93 G81 6 50 20 - 40SF plus ES 10 048151 100 £68.47 G81 6 40 3 - 12SF plus ES 18 048152 100 £63.97 G81 6 40 10 - 25SF plus ES 28 058183 100 £76.89 G81 6 40 15 - 31SF plus ZS 10 058184 100 £54.98 G81 6 35 3 - 12SF plus ZS 18 048161 100 £80.47 G81 6 40 10 - 25SF plus ZS 28 048162 75 £103.87 G81 6 40 15 - 31
SF plus LS Clip fix plus cable strap SF plus ES Clip fix plus single clamp SF plus ZS ClipFix plus twin clamp
SF Plus SD fixing pin
Items to order onlySales unit
£ Price per 100 pieces
Discount group
Drill-hole Min. drill hole depth Usable length
Item Art.-No. [pcs] [Ø mm] [mm] [mm]
SF plus SD 30 058178 200 £24.07 G81 6 35 4SF plus SD 40 058179 100 £26.52 G81 6 35 15
SF plus SD ClipFix plus clip fixing
SF Plus KB cable clasp/ KB Cable clasp
Sales unit
£ Price per 100 pieces
Discount group
Drill-hole Min. drill hole depth
Dimensions Dimension of slot
Max. number of ducts
Item Art.-No. [pcs] [Ø mm] [mm] [mm] [mm]
SF plus KB 8 048171 50 £127.57 G81 6 35 — — 8 ducts NYM 3 x 1,5SF plus KB 16 048172 25 £232.79 G81 6 35 — — 16 ducts NYM 3 x 1,5KB 8 058135 50 £87.51 G81 — — 15 x 133 6 x 10 8 ducts NYM 3 x 1,5KB 16 058136 50 £147.04 G81 — — 15 x 230 6 x 10 16 ducts NYM 3 x 1,5
KB 8 SF plus clasp KB 16 SFplus clasp KB 8 Cable clasp KB 16 Cable clasp
SHA Cable harness / SF Plus MS Installation base / SHA KP Connection piece
Items to order onlySales unit
£ Price per 100 pieces
Discount group
Drill holedepth
Min. drill hole depth
Dimensions Max. number of ducts
Item Art.-No. [pcs] [Ø mm] [mm] [mm]
SHA 15 058139 50 £312.12 G81 — — 93 x 49 15 ducts NYM 3 x 1,5SHA 30 058140 25 £379.19 G81 — — 128 x 59 30 ducts NYM 3 x 1,5Installation Base & Connection pieceSF plus MS 048181 50 £64.27 G81 6 35 41 x 27 installation base with clipSHA KP 058142 50 £23.40 G81 — — — installation base
SHA Cable harness
SHA MS Installation base
SHA KP Connection piece
SF plus MS plus installation base
ELECTRICAL FIXINGS
59
For full product details please refer to the Main Catalogue Section
RC Pipe clamp
Items to order onlySales unit
£ Price per 100 pieces
Discount group
Drill hole Min. drill hole depth
Suitable for IEC
Clamping range
Dimension of slot
Item Art.-No. [pcs] [Ø mm] [mm] [mm] [mm]
SF plus RC IEC 12 048190 100 £59.27 G81 6 35 12 12 - 13 6 x 7SF plus RC IEC 16 048191 100 £60.60 G81 6 35 16 15 - 16 6 x 8SF plus RC IEC 20 048193 100 £72.31 G81 6 35 20 20 - 21 6 x 10SF plus RC IEC 25 048197 50 £88.99 G81 6 35 25 24 - 25 6 x 10SF plus RC IEC 32 048198 25 £141.19 G81 6 35 32 31 - 32 6 x 10SF plus RC IEC 40 048199 25 £203.44 G81 6 35 40 38 - 40 6 x 10
Clipfix plus pipe clip RC
SCH Saddle Fixing
Items to order onlySales unit
£ Price per 100 pieces
Discount group
Clamping range
Dimension of insulated pipes
Item Art.-No. [pcs] [mm]
SCH 812 060012 100 £71.66 G81 8 - 12 6 x 1 - 8 x 1SCH 1216 060016 50 £89.36 G81 12 - 16 10 x 1 - 12 x 1SCH 1619 069019 50 £120.33 G81 16 - 19 —SCH 1623 060023 50 £165.79 G81 16 - 23 15 x 1 - 18 x 1SCH 2332 060032 25 £254.53 G81 23 - 32 22 x 1 - 22 x 1,5SCH 3242 060042 25 £359.94 G81 32 - 42 22 x 1 - 22 x 1,5
Saddle SCH, colour: Nylon transparent
Saddle SCH, colour: grey RAL 7035
ELECTRICAL FIXINGS
60
WCN Toilet fixing set
Item Art.-No.Sales unit
[pcs]£ Price
per 100 setsDiscount
groupContents
per fixings set
WCN 1 60561 50 £211.05 G782 x wallplugs S8, 2 x brass screws 6 x 70 hex. 2 x cover caps white, 2 x plastic collars
WCN 2 60562 50 £267.92 G782 x wallplugs S8, 2 x brass screws 6 x 70 hex. 2 x cover caps chrome, 2 x plastic collars
Bowl to floor
WD Wash basin and urinal fixing set
Item Art.-No.Sales unit
[pcs]£ Price
per 100 setsDiscount
groupContents
per fixings set
WD 8 x 90 80659 50 £499.50 G78 2 x wallplugs UX, 2 x stud screws M8 x 90 zinc plated 2 x nylon nuts BU M8
WD 8 x 110 80658 50 £557.08 G78 2 x wallplugs UX, 2 x stud screws M8 x 110 zinc plated, 2 x nylon nuts BU M8
WD 10 x 120 80655 50 £652.22 G78 2 x wallplugs UX, 2 x stud Screws M10 x 120 zinc plated, 2 x nylon nuts BU M10
WD 10 x 140 80656 50 £686.02 G78 2 x wallplugs UX, 2 x stud Screws M10 x 140 zinc plated, 2 x nylon nuts BU M10
Basin to wall
SANITARY FIXINGS
WCR 8S RD fixing set
Items to order only Art.-No.
Sales unit [pcs]
£ Price per 100 sets
Discount group
Contents per fixings set
S8 RD 70 WCR 60564 50 £378.06 G78 2 x wallplugs S8 RD 70, 2 x brass screws 6 x 70 hex head, 2 x cover caps chrome and white, 2 snap-fit sleeves
S8 RD 60 WCR 60570 50 £400.59 G78 2 x wallplugs S8 RD 60, 2 x brass screws 6 x 65 hex head, 2 x cover caps chrome and white
S8 RD 80 WCR 60568 50 £469.46 G78 2 x wallplugs S8 RD 80, 2 x brass screws 6 x 85 hex head, 2 x cover capschrome and white
S8 D WCR 42922 50 £449.41 G78 2 x wallplugs S8 R 80, 2 x brass screws 8 x 85, 2 x cover caps white
Bowl to floor
WB5 N W.C. pan / bidet fixing
Item Art.-No.Sales unit
[pcs]£ Price
per 100 setsDiscount
groupContents
per fixings set
WB5 N 42914 50 £1,010.26 G782 x wallplugs SX10, 2 x hex head screws 7 x 65, 2 x washers, 2 x nylon bushes, 2 x screws stainless steel, 2 x nylon brackets, 2 x silver caps, 2 x white caps
Bowl to floor
WST Wash basin fixing set
Item Art.-No.Sales unit
[pcs]£ Price
per 100 setsDiscount
groupContents
per fixings set
WST 140 42909 50 £686.02 G782 x wallplugs S14, 2 x stud screws M10 x 140 zinc plated, 2 x hex. steel nuts M10 zinc plated, 2 nylon flange bushes BDH M10
WST 120 42907 50 £650.96 G782 x wallplugs S14, 2 x stud screws M10 x 120 Zinc plated, 2 x hex. nuts M10 zinc plated. 2 flanged bushes BDH M10
Basin to wall
61
For full product details please refer to the Main Catalogue Section
WL / WLL W.C. & Sanitary sets
Items to order only Sales unit [pcs]
£ Price per 100 sets
Discount group
Contents per fixings set
Item Art.-No.
WL 7 x 60 080651 100 £236.49 100 2 wall plugs UX 10, 2 screws 7 x 65 hex. head zinc-plated, 2 washers zinc-plated
WL 8 x 70 080652 100 £246.48 100 2 wall plugs UX 10, 2 screws 8 x 70 6kt. DIN 571 zinc-plated, 2 washers zinc-plated
WL 10 x 70 080650 50 £302.25 100 2 wall plugs UX 12, 2 screws 10 x 70 6kt. DIN 571 zinc-plated, 2 washers zinc-plated
WLL 7 x 60 42919 50 £125.51 100 2 wall plugs S 10, 2 screws 7 x 65 hex. head zinc-plated, 2 washers zinc-plated
WLL 8 x 70 42920 50 £79.21 100 2 wall plugs S10, 2 screws 8 x 70 6kt. DIN 571 zinc-plated, 2 washers zinc-plated
WLL 10 x 70 42921 50 £98.01 100 2 wall plugs S 12, 2 screws 10 x 70 6kt. DIN 571 zinc-plated, 2 washers zinc-plated
WL - W.C. & sanitary fixing WLL- W.C. & sanitary fixing
WB9N WC fixing kit
Item to order onlySales unit
£ Price per set
Discount group
Contents per fixings set
Item Art.-No. [pcs]
WB9N kit 04013 1 £14.52 G722 x GFR Nylon bodies, 2 x M12 threaded sockets, 2 x caps (white) 1 x allen key
Bowl to wall
CBB1 - Small hand rinse / corner basin bracket fixing set
Sales unit £ Price per set
Discount group
Contents per fixings set
Item Art.-No. [pcs]
CBB1 42832 10 £7.11 G722 x basin brackets, 2 x coachscrews 7 x 65mm, 2 x washers, 2 x wallplugs SX 10mm
Basin to wall
WB5N - W.C. Pan to floor side fixing set
Sales unit £ Price per set
Discount group
Contents per fixings set
Item Art.-No. [pcs]
WB5N 42831 10 £10.91 G72
2 x SX10 nylon plugs, 2 x zinc plated hex. screws 7 x 65mm2 x zinc plated washers, 2 x countersunk nylon bushes2 x brass drilled screws 5 x 30mm, 2 x nylon angle brackets2 x flat white caps
Bowl to floor
For use in solid walls
SANITARY RETAIL RANGE
SANITARY FIXINGS
62 SANITARY FIXINGS
WD 8 - Wash basin fixing set
Sales unit
£ Price per set
Discount group
Contents per fixings set
Item Art.-No. [pcs]
WD 8 x 100 42836 10 £5.75 G722 x S10 nylon wallplugs, 2 x zinc plated stud screws,M8 x 100 mm, 2 x nylon flanged nuts
WB10 - W.C. Pan to floor verticle fixing set
Sales unit
£ Price per set
Discount group
Contents per fixings set
Item Art.-No. [pcs]
WB 10 42834 10 £7.58 G72
2 x SX 8 nylon plugs, 2 x drilled brass screws 5 x 85mm, 2 x countersunk nylon bushes, 2 x flat white caps 12mm, 2 x flat white caps 15mm, 2 x raised nylon bushes, 2 x raised white caps
Basin to wall
Bowl to floor
WST 140 - Wash basin fixing set
Sales unit
£ Price per set
Discount group
Contents per fixings set
Item Art.-No. [pcs]
WST 140 42833 10 £6.00 G722 x SX14 nylon plugs, 2 x zinc plated stud screws M10x140mm2 x nylon flanged bushes, 2 x zinc plated hex. nuts M10
WPB1 - Washbasin with pedestal fixing set
Sales unit
£ Price per set
Discount group
Contents per fixings set
Item Art.-No. [pcs]
WPB 1 42835 10 £5.70 G724 x SX 8 nylon plugs, 2 x PD10 plasterboard fixings, 4 x zinc plated screws, 5 x 60mm, 2 x countersunk nylon bushes, 2 x raised nylon bushes
Basin to wall/Pedestal to floor)
Basin to wall
63
For full product details please refer to the Main Catalogue Section
AD Scaffold Cover cap
Items to order only Sales unit
£ Price per 100 pieces
Discount group
Length Head height Sales unit
Item Art.-No. [pcs] [mm] [mm] [pcs]
AD 12 x 40 W 060259 100 £48.93 G77 40 3 100AD 12 x 40 G 060260 100 £48.93 G77 40 3 100
GS 12 Scaffold anchor
Items to order only Sales unit
£ Price per 100 pieces
Discount group
Shaft diameter
Shaft length
Max. thickness of non-bearing layer
Eye-Ø Fits
Item Art.-No. [pcs] [mm] [mm] [mm] [mm]
GS 12 x 90 080925 25 £401.19 G77 12 90 15 23 S 14 ROE 70GS 12 x 120 080926 25 £703.08 G77 12 120 45 23 S 14 ROE 100 / S16 H 100 RGS 12 x 160 080927 25 £768.61 G77 12 160 85 23 S 14 ROE 135 / S 16 H 135 RGS 12 x 190 080960 25 £1,105.40 G77 12 190 115 23 S 14 ROE 185 / S 16 H 160 RGS 12 x 230 080961 25 £1,105.92 G77 12 230 155 23 S 14 ROE 185 / S 16 H 160 RGS 12 x 300 081269 25 £1,107.91 G77 12 300 225 23 S 14 ROE 185 / S 16 H 160 RGS 12 x 350 080962 25 £1,198.78 G77 12 350 275 23 S 14 ROE 185 / S 16 H 160 R
Scaffold eyebolt GS 12
S14 ROE Plug
Items to order only Sales unit
£ Price per 100 pieces
Discount group
Min drill hole depth
Min drill hole depth for through fixings
Effect. anchoring depth
Anchor length
Max. thickness of non-load bearing layer
Item Art.-No. [pcs] [mm] [mm] [mm] [mm] [mm]
S 14 ROE 100 052160 25 £132.31 G77 14 80 70 70 -
S 14 ROE 100 052161 25 £135.95 G77 14 110 70 100 30
S 14 ROE 185 052164 25 £289.51 G77 14 195 70 185 110
Plug S 14 ROE
M 16 Scaffold anchor
Sales unit
£ Price per piece
Discount group
Drill hole diameter thread
Item Art.-No. [pcs] [mm] [mm]
M16 Scaffold anchor 42896 1 £12.02 G77 as per fixing EA M-N, EA II or RG M16 I M 16
Scaffold anchor M16
SCAFFOLD FIXINGS
S14 ROE - Use with GS 12 scaffold anchors
Use in S14 ROE Plugs when anchor has been removed
64
Hammerset anchor EA-N
EA-N Drop in anchor
zinc-plated steel
Sales unit
£ Price per 100 pieces
Discount group
Drill hole diameter
Effective anchoring & drill depth
Internal thread
Min. bolt penetration
Max. bolt penetration
Item Art.-No. [pcs] [mm] [mm] [mm] [mm] [mm]
EA M16 N 90163 20 £150.45 G39 20 65 M 16 16 27For setting tools - see page 36
S 12 R Plug
Min order qtypcs.
£ priceper 100 pieces
Discount group
Drill[mm]
Fixing length[mm]
M ax. usable length[mm]
For eyebolt[mm]
Item Art.-No.
S 12 R 100 50177 100 £75.68 G21 12 100 40 GS 10S 12 R 135 50178 100 £87.54 G21 12 135 75 GS 10
GS 8 Eye bolt
Item to order only zinc-plated
steelSales unit
£ Price
per 100 piecesDiscount
groupEye-Ø[mm]
Shaft length[mm]
fits
Item Art.-No. [pcs]
GS 8 x 80 80918 20 £288.31 G77 22 80 S 10 plugGS 8 x 100 80919 20 £321.13 G77 22 100 S 10 plugGS 8 x 120 80920 20 £342.37 G77 22 120 S 10 plug GS 10 x 160 80929 20 £472.26 G77 30 160 S12R, S14H-R, GB 14
Eyebolt GS 8
Plug S 12 R
SCAFFOLD FIXINGS
65
For full product details please refer to the Main Catalogue Section
DHK Insulation support
Item to order onlySales unit
£ Price
per 100 piecesDiscount
groupDrill Effect. anchoring
depthAnchor length
Max. usable length
Item Art.-No. [pcs] [mm] [mm] [mm] [mm]
DHK 40 80937 250 £38.26 G80 8 20 65 40DHK 60 80938 250 £39.93 G80 8 20 85 60DHK 80 80939 250 £43.01 G80 8 20 105 80DHK 100 80940 250 £48.20 G80 8 20 125 100DHK 120 80941 200 £55.96 G80 8 20 145 120DHK 140 80949 200 £74.81 G80 8 20 165 140DHK 160 512150 100 £78.52 G80 8 20 185 160DHK 180 512151 250 £85.35 G80 8 20 205 180DHK 200 512153 250 £92.05 G80 8 20 225 200DHK 220 512154 250 £97.58 G80 8 20 245 220DHK 45DHK 45/40 80892 250 £34.08 G80 8 20 65 40DHK 45/60 80893 250 £39.53 G80 8 20 85 60DHK 45/80 80894 250 £49.51 G80 8 20 105 80DHK 45/100 80895 250 £63.96 G80 8 20 125 100
DHK 45, Insulation support, plate-ø 45 mm
DHK, Insulation support, plate-ø 90 mm
DHM / DTM 80
Items to order only Sales unit
£ Price per 100 pieces
Discount group
Drill hole diameter
Min. drill hole depth
Effect. anchoring depth
Anchorlength
Max. fixture thickness
Item Art.-No. [pcs] [mm] [mm] [mm] [mm] [mm]
DHM 30 088801 1) 250 £63.47 G80 8 60 50 90 0 - 40DHM 60 088802 1) 250 £64.23 G80 8 60 50 110 30 - 60DHM 90 088803 1) 250 £68.35 G80 8 60 50 140 60 - 90DHM 120 061581 1) 250 £74.00 G80 8 60 50 170 90 - 120DHM 135 503131 1) 250 £82.81 G80 8 60 50 185 120 - 135DHM 150 061582 1) 250 £83.14 G80 8 60 50 200 120 - 150DHM 200 519317 1) 125 £115.51 G80 8 60 50 250 170-200DHM 250 519318 1) 125 £139.20 G80 8 60 50 300 220-250Inox Insulation supportDHM 30 INOX 506135 1) 250 £127.11 G80 8 60 50 90 0 - 40DHM 60 INOX 506136 1) 250 £138.46 G80 8 60 50 110 30 - 60DHM 90 INOX 506137 1) 250 £148.91 G80 8 60 50 140 60 - 90DHM 120 INOX 506138 1) 250 £164.22 G80 8 60 50 170 90 - 120DHM 150 INOX 506140 1) 250 £180.84 G80 8 60 50 200 120 - 150DHM 200 INOX 519319 1) 125 £258.47 G80 8 60 50 250 170-200DHM 250 INOX 519320 1) 125 £302.43 G80 8 60 50 300 220-250
Inox Insulation retaining washer
DTM 80 Washer 088806 1) 250 £42.93 G80 (Ø 80mm disc) — — —DTM 80 INOX Washer 506141 1) 250 £111.28 G80 (Ø 80mm disc) — — —
DHM, Insulation support metal washer-ø 35 mm
1) Fixing can be installed into aerated concrete without pre-drilling.
DTM 80, Insulation retaining metal washer washer-ø 85 mm, inside-ø 14 mm
INSULATION FIXINGS
66
DIPK 8 / 10 Render fixing
Items to order only Sales unit
£ Price per 100 pieces
Discount group
Drill hole diameter
Usable length
Min. drill hole depth
Effect. anchoring depth
Nail length
Fixing length
Item Art.-No. [pcs] [mm] [mm] [mm] [mm] [mm] [mm]
DIPK 8/20-40 041865 200 £30.13 G80 8 20 - 40 40 30 77 70DIPK 8/60-80 041867 200 £43.57 G80 8 60 - 80 40 30 117 110DIPK 8/80-100 041868 200 £56.79 G80 8 80 - 100 40 30 137 130DIPK 8/100-120 041869 200 £75.66 G80 8 110 - 120 40 30 157 150DIPK 10/10-30 043966 200 £38.73 G80 10 10 - 30 40 30 67 60DIPK 10/40-60 043967 200 £41.01 G80 10 40 - 60 40 30 97 90DIPK 10/60-80 043968 200 £42.40 G80 10 60 - 80 40 30 117 110DIPK 10/80-100 043969 200 £49.14 G80 10 80 - 100 40 30 137 130DIPK 10/100-120 043970 200 £55.87 G80 10 110 - 120 40 30 157 150DIPK 10/120-140 043971 1) 200 £68.17 G80 10 120 - 140 40 30 117 170DIPK 10/140-160 043972 1) 200 £68.51 G80 10 140 - 160 40 30 137 1901) Installation with setting tool, included in each package.
Render fixing DIPK
FIF-S Render fixing
Items to order only Sales unit
£ Price per 100 pieces
Discount group
Drill hole diameter
Min. drill hole depth
Effect. anchoring depth
Anchor length
Max. fixture thickness
Disk Ø
Item Art.-No. [pcs] [mm] [mm] [mm] [mm] [mm] [mm]
FIF-S 8/60 511810 100 £50.23 G80 8 45 35 108 70 58FIF-S 8/80 511811 100 £48.97 G80 8 45 35 128 90 58FIF-S 8/100 511812 100 £58.43 G80 8 45 35 148 110 58FIF-S 8/120 511813 100 £66.38 G80 8 45 35 168 130 58FIF-S 8/140 511814 100 £75.82 G80 8 45 35 188 150 58FIF-S 8/160 511815 100 £88.44 G80 8 45 35 208 170 58FIF-S 8/180 511816 100 £90.62 G80 8 45 35 228 190 58FIF-S 8/200 511817 100 £190.93 G80 8 45 35 248 210 58FIF-S 8/220 511818 100 £223.30 G80 8 45 35 268 230 58FIF-S 8/240 511819 100 £261.71 G80 8 45 35 288 250 58FIF-S 8/260 511820 100 £289.53 G80 8 45 35 308 270 58FIF-S 8/280 511821 100 £316.98 G80 8 45 35 328 290 58FIF-S 8/300 511822 100 £339.67 G80 8 45 35 348 310 58FIF-S 8/320 511823 100 £371.38 G80 8 45 35 368 330 58FIF-S 8/340 511824 100 £401.21 G80 8 45 35 388 350 58
Render fixing FIF-S
INSULATION FIXINGS
67
For full product details please refer to the Main Catalogue Section
Thermax 8/10
Items to order only Sales unit
£ Price per 100 pieces
Discount group
Drill hole diameter d
o
Usable lengtht
fix
chipboard / metric / sheet metal screw
Item Art.-No. [pcs] [mm] [mm] [mm]
Thermax 8/60 M6 45685 20 £433.19 G75 10 45-60 4,5-6,0 / M6 / 6,3Thermax 8/80 M6 45686 20 £439.79 G75 10 60-80 4,5-6,0 / M6 / 6,3Thermax 8/100 M6 45687 20 £446.44 G75 10 80-100 4,5-6,0 / M6 / 6,3Thermax 8/120 M6 45688 20 £453.19 G75 10 100-120 4,5-6,0 / M6 / 6,3Thermax 8/140 M6 45689 20 £466.48 G75 10 120-140 4,5-6,0 / M6 / 6,3Thermax 8/160 M6 45690 20 £479.73 G75 10 140-160 4,5-6,0 / M6 / 6,3Thermax 8/180 M6 45691 20 £499.82 G75 10 160-180 4,5-6,0 / M6 / 6,3Thermax 10/100 M6 45692 20 £499.82 G75 12 80-100 4,5-6,0 / M6 / 6,3Thermax 10/120 M6 45693 20 £506.48 G75 12 100-120 4,5-6,0 / M6 / 6,3Thermax 10/140 M6 45694 20 £513.07 G75 12 120-140 4,5-6,0 / M6 / 6,3Thermax 10/160 M6 45695 20 £526.47 G75 12 140-160 4,5-6,0 / M6 / 6,3Thermax 10/180 M6 45696 20 £546.42 G75 12 160-180 4,5-6,0 / M6 / 6,3Thermax 10/220 M6 514250 20 £760.46 G75 12 200-220 4,5-6,0 / M6 / 6,3Thermax 10/240 M6 514251 20 £795.25 G75 12 220-240 4,5-6,0 / M6 / 6,3Thermax 10/100 M8 45697 20 £499.82 G75 12 80-100 M8Thermax 10/120 M8 45698 20 £506.48 G75 12 100-120 M8Thermax 10/140 M8 45699 20 £513.07 G75 12 120-140 M8Thermax 10/160 M8 45700 20 £526.47 G75 12 140-160 M8Thermax 10/180 M8 514252 20 £551.46 G75 12 160-180 M8Thermax 10/200 M8 514253 20 £604.10 G75 12 180-200 M8Thermax 10/220 M8 514254 20 £760.46 G75 12 200-220 M8Thermax 10/240 M8 514255 20 £795.25 G75 12 220-240 M8Thermax 10/100 M10 45702 20 £499.82 G75 12 80-100 M10Thermax 10/120 M10 45703 20 £506.48 G75 12 100-120 M10Thermax 10/140 M10 45704 20 £513.07 G75 12 120-140 M10Thermax 10/160 M10 45705 20 £526.47 G75 12 140-160 M10Thermax 10/180 M10 514256 20 £551.46 G75 12 160-180 M10Thermax 10/200 M10 514257 20 £604.10 G75 12 180-200 M10Thermax 10/220 M10 514258 20 £760.46 G75 12 200-220 M10Thermax 10/240 M10 514259 20 £795.25 G75 12 220-259 M10
INSULATION FIXINGS
Insulation discs
Items to order only Sales unit
£ Price per 100 pieces
Discount group
Disk Ø Disc height
Through hole
Steel sheet thickness
Item Art.-No. [pcs] [mm] [mm] [mm] [mm]
HK 36 plastic 004283 100 £19.22 G75 36 3 5 —HV 36 zinc 004286 100 £13.56 G75 36 3 5 —ISO-disk 8/60 001680 100 £23.87 G75 60 7 8 —DT 60/10 044317 50 £53.07 G80 60 7 10,5 0,5DTM 60/10 A4 088805 100 £163.20 G80 60 3 10,5 0,5DTM 70/10 zinc 044318 50 £55.89 G80 70 3 10,5 —DT 90/4 080957 1) 250 £54.04 G80 90 7 4 —DT 90/8 080958 250 £56.67 G80 90 7 8 —
1) The central hole is adapted in such a way that the disc clamps well on the 4 mm wire of the VB Wall tie.
HV 36 plastic HV 36 zinc ISO-disk 8/60 DT 60/10 DTM 70/10DTM-A4 DT 90
Thermax 8/10 - Use for fixing through insulation system with no thermal bridging
68 INSULATION FIXINGS
DHT S Retaining disk and screw
Items to order only Sales unit
£ Price per 100 pieces
Discount group
Colour Usable length
Shaft length
Screw length
Effect. anchoring depth
Disk Ø
Item Art.-No. [pcs] [mm] [mm] [mm] [mm] [mm]
DHT S 30 W 044390 500 £57.63 G80 white 30 20 45 25 50DHT S 50 W 044392 500 £64.81 G80 white 40 - 50 20 65 25 50DHT S 70 W 044394 500 £71.60 G80 white 60 - 70 40 65 25 50DHT S 80 W 044395 500 £80.51 G80 white 70 - 80 40 75 25 50DHT S 100 W 044388 500 £90.39 G80 white 90 - 105 40 100 25 50DHT S 120 W 044389 500 £98.84 G80 white 110 - 125 40 120 25 50DHT S 150 W 516154 500 £131.25 G80 white 140 - 155 40 150 25 50
Retaining disc with screw DHT S
FID 50
Sales unit
£ Price per 100 pieces
Discount group
Anchor length
Min. bolt penetration
Wood and chipboard screws
Actuation
Item Art.-No. [pcs] [mm] [mm] [mm]
FID 50 048213 50 £85.86 G14 50 50 4,5 - 5,0 TX40
FID 90 510971 25 £150.26 G14 90 90 6 6 mm / 6-kt
Insulation fixing FID 50 Insulation fixing FID 90FID 50/90 - For use in insulation board
69
For full product details please refer to the Main Catalogue Section
B3 General purpose foam
Item Art.-No.Sales unit
£ Price
per pieceDiscount
groupContents per canister
[ml]Max. foam yield
per 1000ml [pcs]
B3 Hand Foam 42748 12 £23.90 G54 750 35
B3 Gun Foam 42749 12 £23.90 G54 750 35
Hand Nozzle x 10 42751 1 £6.42 G54 —
General purpose Hand Foam B3 General purpose Gun Foam B3
B2 Foam with fire retardant additives
Item Art.-No.Sales unit
£ Price
per pieceDiscount
groupContents per canister Max. foam yield
[pcs] [ml] per 1000ml
B2 Hand Foam 42755 750 £25.66 G55 750 35
B2 Gun Foam 42754 750 £25.66 G55 750 35
Hand Nozzle x 10 42751 1 £6.42 G54 —
Hand foam with fire retardant additives B2
Gun foam with fire retardant additives B2
B2 foam contains fire retardant additives. To form a fire seal and obtain a fire rating approval the foam MUST be used in conjunction with fischer FiAM or FFRS as part
of an assessed fire barrier system.
FireStop foam
Sales unit
£ Price per piece
Discount group
Contents per canister Max. foam yield
Item Art.-No. [pcs] [ml] Per 1000ml
FireStop Hand Foam 42757 12 £30.32 G64 750 40
FireStop Gun Foam 43712 12 £29.33 G64 750 40
Hand Nozzle x 10 42751 1 £6.42 G54 —
Fire rated Hand foam Fire rated Gun foam
Single component foam with proven fire resistance. Provides up to 4 hour fire resistance. Can be used with fischer FiAM and FFRS sealants to extend application range.
B3 foam is suitable for general applications only. It is NOT a fire retardant foam. Ideal for all types of filling and
sealing tasks.
PU1 B3 Fast cure, reusable foam
Sales unit
£ Price per piece
Discount group
Contents per canister Max. foam yield
Item Art.-No. [pcs] [ml] Per 1000ml
PU1/500 B3 Hand foam 58500 12 £26.78 G54 500 28
PU1/750 B3 Hand foam 50427 12 £33.90 G54 750 41
Hand foam B3 fast cure reusable foam, 750 ml
Hand foam B3 fast cure reusable foam, 500 ml
PU1 B3 Fast cure, reusable foam is designed for hand use only, no additional tools required.
FOAMS & SEALANTS
70 FOAMS & SEALANTS
PU Foam cleaner
Item Art.-No.Sales unit
£ Price
per pieceDiscount
groupcontents per canister
[pcs] [ml]
PU Foam Cleaner 042750 1 £10.25 G54 500
Foam & sealant accessories
Sales unit £ Price per piece
Discount group
Item Art.-No. [pcs]
Standard Foam Gun 062400 1 £76.28 G60Professional Foam Gun 033208 1 £58.84 G60KP M2 Applicator gun 053117 1 £42.11 G60Hand Foam Nozzles x 10 042751 6 £6.42 G54
Professional foam gunStandard foam gun KP M2 Sealant gun Hand foam nozzles
FiAM FireStop acoustic sealant
Items to order onlySales unit £ Price
per pieceDiscount
groupContents per canister / pack*
Item Art.-No. [pcs] [ml]
FiAM 310 053011 25 £5.33 G64 310
FiAM 600 056006 12 £8.89 G64 600*
KP M2 Applicator gun 053117 1 £42.11 G60 -
PF 600 Gun 600ml 097967 1 £138.77 G64 -
FireStop acoustic mastic sealant contains fire retardant
additives. Can be used with fischer FireStop foam to extend
application range. Suitable for use with B2 foam as part of
an assessed fire barrier system.
FiAM 310ml FiAM 600ml Approved CF 5034
FFRS Fire rated sealant
Items to order onlySales unit £ Price
per pieceDiscount
groupContents per
canister Colour
Item Art.-No. [pcs] [ml]
FFRS 310 G 512374 12 £16.11 G64 310 Grey
FFRS 310 W 518778 12 £16.11 G64 310 White
KP M2 Applicator gun 053117 1 £42.11 G52 -
FFRS 310ml
Fire rated silicone sealant with high movement capabilities
and 4hr fire integrity. Can be used with fischer FireStop
foam to form a fire barrier system.
Approved CF 5093
71
For full product details please refer to the Main Catalogue Section
DMS General Purpose Silicone sealant
Items to order onlySales unit £ Price
per pieceDiscount
groupColour Contents
Item Art.-No. [pcs] [ml]
DMS TP (GB/E) 040385 24 £5.30 G56 transparent 280DMS W (GB/E) 040386 24 £5.30 G56 white 280
FOAMS & SEALANTS
Express Cement
Sales unit £ Price per piece
Discount group
Colour Contents
Item Art.-No. [pcs] [ml]
Express Cement - G 523856 12 £12.94 G56 Grey 310Express Cement - S 523858 12 £12.94 G56 Sand 310
Rea
dyfo
ruse
Per
fect
forr
epair
wor
ksto
wall
s,
tiles
andc
hipp
edto
need
ges
Pain
tabl
eafte
rcur
ing
Sui
tabl
efor
indo
oran
dout
door
ap
plic
atio
nsDEC
Expr
Ess
CEm
Ent
prEm
ium
1 co
mpon
ent s
ealin
g com
poun
dAc
rylic
dis
pers
ion
base
d Sa
nd c
olou
r
Rea
dyfo
ruse
Per
fect
forr
epai
rwor
ksto
wal
ls,
tile
sand
chip
ped
ston
eed
ges
Pai
ntab
lea
fterc
urin
g
Sui
tabl
efo
rind
oora
ndo
utdo
or
appl
icat
ionsDE
C
Expr
Ess
CEm
Ent
prEm
ium
1 co
mpo
nent
seali
ng co
mpo
und
Acry
lic d
ispe
rsio
n ba
sed
Grey
col
our
Express Cement - Acrylic based for
masonry repair and pointing
72 DRILL BITS | DRIVE BITS
SDS Plus IV Quattric hammer drill bit for reinforced concrete
Items to order onlySales unit £ Price
per pieceDiscount
groupDiameter Working
lengthTotal
length Pack type
Item Art.-No. [mm] [mm] [mm] [qty]
SDS Plus IV 6/50/110 504123 1 £9.85 G97 6 50 110 euro clip (1)SDS Plus IV 6/100/160 504124 1 £10.42 G97 6 100 160 euro clip (1)SDS Plus IV 6/150/210 504131 1 £13.59 G97 6 150 210 euro clip (1)SDS Plus IV 8/100/160 504133 1 £11.86 G97 8 100 160 euro clip (1)SDS Plus IV 8/250/310 506524 1 £18.56 G97 8 250 310 euro clip (1)SDS Plus IV 10/100/160 504140 1 £12.17 G97 10 100 160 euro clip (1)SDS Plus IV 10/150/210 504141 1 £13.67 G97 10 150 210 euro clip (1)SDS Plus IV 10/250/310 504143 1 £20.44 G97 10 250 310 euro clip (1)SDS Plus IV 12/150/210 504145 1 £16.02 G97 12 150 210 euro clip (1)SDS Plus IV 12/250/310 504150 1 £23.58 G97 12 250 310 euro clip (1)SDS Plus IV 14/150/210 504153 1 £22.23 G97 14 150 210 euro clip (1)SDS Plus IV 14/250/310 504154 1 £27.45 G97 14 250 310 euro clip (1)SDS Plus IV 16/150/210 506533 1 £34.46 G97 16 150 210 euro clip (1)SDS Plus IV 16/250/310 506535 1 £40.60 G97 16 250 310 euro clip (1)SDS Plus IV 18/400/450 504163 1 £52.95 G97 18 400 450 euro clip (1)SDS Plus IV 20/200/250 504164 1 £53.01 G97 20 200 250 euro clip (1)SDS Plus IV 20/400/450 504167 1 £62.35 G97 20 400 450 euro clip (1)
SDS Plus II Pro hammer drill bit
Items to order onlySales unit £ Price
per pieceDiscount
groupDiameter Working
lengthTotal
length Pack type
Item Art.-No. [pcs] [mm] [mm] [mm] [qty]SDS Plus II 5/100/160 503883 1 £4.64 5 100 160 euro clip (1)SDS Plus II 6/100/160 503900 1 £4.46 G97 6 100 160 euro clip (1)SDS Plus II 6/150/210 503901 1 £7.05 G97 6 150 210 euro clip (1)SDS Plus II 7/100/160 503921 1 £5.54 G97 7 100 160 euro clip (1)SDS Plus II 8/100/160 503931 1 £5.12 G97 8 100 160 euro clip (1)SDS Plus II 8/150/210 503932 1 £7.05 G97 8 150 210 euro clip (1)SDS Plus II 8/200/260 503933 1 £7.47 G97 8 200 260 euro clip (1)SDS Plus II 10/100/160 503943 1 £5.66 G97 10 100 160 euro clip (1)SDS Plus II 10/150/210 503944 1 £7.29 G97 10 150 210 euro clip (1)SDS Plus II 10/200/260 503955 1 £8.55 G97 10 200 260 euro clip (1)SDS Plus II 10/250/310 503957 1 £11.63 G97 10 250 310 euro clip (1)SDS Plus II 10/400/450 503973 1 £18.13 G97 10 400 450 euro clip (1)SDS Plus II 12/100/160 504002 1 £7.17 G97 12 100 160 euro clip (1)SDS Plus II 12/150/210 504003 1 £8.92 G97 12 150 210 euro clip (1)SDS Plus II 12/200/260 504004 1 £10.78 G97 12 200 260 euro clip (1)SDS Plus II 12/400/450 504007 1 £21.02 G97 12 400 450 euro clip (1)SDS Plus II 14/100/160 504014 1 £8.86 G97 14 100 160 euro clip (1)SDS Plus II 14/150/210 504015 1 £11.33 G97 14 150 210 euro clip (1)SDS Plus II 14/200/260 504016 1 £13.86 G97 14 200 260 euro clip (1)SDS Plus II 14/400/450 504018 1 £22.59 G97 14 400 450 euro clip (1)SDS Plus II 15/100/160 504024 1 £11.33 G97 15 100 160 euro clip (1)SDS Plus II 16/150/210 504031 1 £15.90 G97 16 150 210 euro clip (1)SDS Plus II 16/200/260 504032 1 £17.71 G97 16 200 260 euro clip (1)SDS Plus II 16/250/310 504037 1 £21.33 G97 16 250 310 euro clip (1)SDS Plus II 16/400/450 504038 1 £28.25 G97 16 400 450 euro clip (1)SDS Plus II 18/150/200 504070 1 £21.99 G97 18 150 200 euro clip (1)SDS Plus II 18/400/450 504074 1 £31.33 G97 18 400 450 euro clip (1)SDS Plus II 20/150/200 504088 1 £29.88 G97 20 150 200 euro clip (1)SDS Plus II 20/250/300 504089 1 £35.30 G97 20 250 300 euro clip (1)SDS Plus II 20/400/450 504093 1 £37.35 G97 20 400 450 euro clip (1)SDS Plus II 22/400/450 504101 1 £44.04 G97 22 400 450 euro clip (1)SDS Plus II 24/400/450 504112 1 £44.04 G97 24 400 450 euro clip (1)SDS Plus II 25/400/450 504114 1 £59.34 G97 25 400 450 euro clip (1)
PGM Approved
PGM Approved
73
For full product details please refer to the Main Catalogue Section
DRILL BITS | DRIVE BITS
SDS Max II and IV
Items to order only Sales unit£ Price
per pieceDiscount
groupDiameter Working
lengthTotal
length Pack type
Item Art.-No. [pcs] [mm] [mm] [mm] [qty]
SDS Max II 12/400/540 504189 1 £66.99 G97 12 400 540 clear tube (1)SDS Max IV 16/200/340 504198 1 £65.30 G97 16 200 340 clear tube (1)SDS Max IV 16/400/540 504199 1 £81.20 G97 16 400 540 clear tube (1)SDS Max IV 18/200/340 504207 1 £69.40 G97 18 200 340 clear tube (1)SDS Max IV 18/400/540 504208 1 £97.05 G97 18 400 540 clear tube (1)SDS Max IV 20/200/320 504214 1 £72.23 G97 20 200 320 clear tube (1)SDS Max IV 20/400/520 504217 1 £85.96 G97 20 400 520 clear tube (1)SDS Max IV 20/800/920 504222 1 £128.43 G97 20 800 920 clear tube (1)SDS Max IV 24/200/320 504228 1 £105.89 G97 24 200 320 clear tube (1)SDS Max IV 24/400/520 504229 1 £124.49 G97 24 400 520 clear tube (1)SDS Max IV 25/200/320 504235 1 £83.55 G97 25 200 320 clear tube (1)SDS Max IV 25/400/520 504236 1 £95.24 G97 25 400 520 clear tube (1)
PGM Approved
SDS Plus / SDS Max Chisel Range
Item to order onlymin order qty £ price
per pieceDiscount
groupLength Width Pack type/qty
Item Head type Art.-No. [pcs] [mm] [mm] [qty]SDS Plus 250 Point 504277 1 £16.63 G97 250 - euro clip (1)SDS Plus 20/250 Flat 504278 1 £16.63 G97 250 20 euro clip (1)SDS Plus 22/250 Hollow 504280 1 £41.45 G97 250 22 euro clip (1)
Scaling - side view
Point FlatPGM Approved
74 DRILL BITS | DRIVE BITS
SDS-Plus drill bit
Item to order onlyOrder No: Sales unit £ Price
per pieceDiscount
groupDiameter Total length Working length Pack type
Item Art.-No. [pcs] [mm] [mm] [mm] [qty]SDS-Plus 5 x 160 43122 1 £7.53 G90 5 160 100 ClipSDS-Plus 5.5 x 160 43153 1 £6.50 G90 5.5 160 100 ClipSDS-Plus 6 x 110 43119 1 £6.34 G90 6 110 50 ClipSDS-Plus 6 x 160 43123 1 £6.65 G90 6 160 100 ClipSDS-Plus 6 x 210 43131 1 £8.41 G90 6 210 150 ClipSDS-Plus 6.5 x 160 43155 1 £6.94 G90 6.5 160 100 ClipSDS-Plus 7 x 110 43147 1 £6.94 G90 7 110 50 ClipSDS-Plus 7 x 160 43124 1 £7.23 G90 7 160 100 ClipSDS-Plus 7 x 210 43089 1 £8.26 G90 7 210 150 ClipSDS-Plus 8 x 110 43120 1 £7.68 G90 8 110 50 ClipSDS-Plus 8 x 160 43125 1 £7.38 G90 8 160 100 ClipSDS-Plus 8 x 210 43132 1 £8.85 G90 8 210 150 ClipSDS-Plus 8 x 260 43139 1 £9.89 G90 8 260 200 ClipSDS-Plus 10 x 160 43126 1 £7.68 G90 10 160 ClipSDS-Plus 10 x 210 43133 1 £9.60 G90 10 210 150 ClipSDS-Plus 10 x 260 43140 1 £10.48 G90 10 260 200 ClipSDS-Plus 10 x 310 43145 1 £13.87 G90 10 310 250 ClipSDS-Plus 10 x 410 43090 1 £18.60 G90 10 410 350 ClipSDS-Plus 11 x 160 43127 1 £8.85 G90 11 160 100 ClipSDS-Plus 12 x 160 43128 1 £8.85 G90 12 160 100 ClipSDS-Plus 12 x 210 43134 1 £13.14 G90 12 210 150 ClipSDS-Plus 12 x 260 43141 1 £11.07 G90 12 260 200 ClipSDS-Plus 12 x 310 43091 1 £12.11 G90 12 310 250 ClipSDS-Plus 12 x 410 43092 1 £19.33 G90 12 410 350 ClipSDS-Plus 12 x 610 43101 1 £29.66 G90 12 610 550 ClipSDS-Plus 13 x 160 43129 1 £10.92 G90 13 160 100 ClipSDS-Plus 13 x 310 43103 1 £14.02 G90 13 310 250 ClipSDS-Plus 14 x 160 43130 1 £10.33 G90 14 160 100 ClipSDS-Plus 14 x 210 43135 1 £13.14 G90 14 210 150 ClipSDS-Plus 14 x 260 43142 1 £15.65 G90 14 260 200 ClipSDS-Plus 14 x 310 43146 1 £15.65 G90 14 310 250 ClipSDS-Plus 14 x 410 43104 1 £31.88 G90 14 410 350 ClipSDS-Plus 14 x 610 43150 1 £35.13 G90 14 610 550 ClipSDS-Plus 15 x 160 43156 1 £12.99 G90 15 160 100 ClipSDS-Plus 15 x 210 43095 1 £16.53 G90 15 210 150 ClipSDS-Plus 15 x 260 43143 1 £16.09 G90 15 260 200 ClipSDS-Plus 16 x 210 43136 1 £15.65 G90 16 210 150 ClipSDS-Plus 16 x 310 43093 1 £21.11 G90 16 310 250 ClipSDS-Plus 16 x 410 43157 1 £23.91 G90 16 410 350 ClipSDS-Plus 16 x 610 43106 1 £34.24 G90 16 610 550 ClipSDS-Plus 18 x 210 43137 1 £19.78 G90 18 210 150 ClipSDS-Plus 18 x 310 43109 1 £28.63 G90 18 310 250 ClipSDS-Plus 18 x 410 43096 1 £32.62 G90 18 410 350 ClipSDS-Plus 20 x 210 43138 1 £24.35 G90 20 210 150 ClipSDS-Plus 20 x 310 43112 1 £30.11 G90 20 310 250 ClipSDS-Plus 20 x 410 43094 1 £34.24 G90 20 410 350 ClipSDS-Plus 22 x 260 43085 1 £28.93 G90 22 260 200 ClipSDS-Plus 22 x 410 43114 1 £40.45 G90 22 410 350 ClipSDS-Plus 25 x 260 43151 1 £32.32 G90 25 260 200 ClipSDS-Plus 25 x 410 43159 1 £43.84 G90 25 410 350 ClipSDS-Plus 26 x 260 43149 1 £99.48 G90 26 260 200 ClipSDS-Plus 26 x 410 43088 1 £85.46 G90 26 410 350 Clip
75
For full product details please refer to the Main Catalogue Section
DRILL BITS | DRIVE BITS
PM - Professional masonry drill bit
Items to order onlySales unit £ Price
per pieceDiscount
groupDiameter Total length Working length Pack type
Item Art.-No. [pcs] [mm] [mm] [mm] [qty]
PM 4 x 75 43003 1 £6.62 G86 4 75 40 ClipPM 4.5 x 85 42997 1 £7.09 G86 4.5 85 40 ClipPM 5 x 85 43004 1 £6.62 G86 5 85 50 ClipPM 5 x 150 42986 1 £8.03 G86 5 150 92 ClipPM 5.5 x 85 42978 1 £6.85 G86 5.5 85 50 ClipPM 5.5 x 150 42987 1 £8.26 G86 5.5 150 92 ClipPM 6 x 100 43005 1 £7.56 G86 6 100 60 ClipPM 6 x 150 42988 1 £8.26 G86 6 150 92 ClipPM 6.5 x 100 42979 1 £6.85 G86 6.5 100 60 ClipPM 6.5 x 150 42989 1 £8.74 G86 6.5 150 92 ClipPM 7 x 100 42980 1 £6.62 G86 7 100 60 ClipPM 7 x 150 42990 1 £8.98 G86 7 150 92 ClipPM 7 x 300 42998 1 £17.47 G86 7 300 249 ClipPM 8 x 120 43006 1 £8.26 G86 8 120 72 ClipPM 8 x 150 42999 1 £9.21 G86 8 150 92 ClipPM 8 x 300 43000 1 £18.66 G86 8 300 249 ClipPM 10 x 120 43007 1 £11.81 G86 10 120 72 ClipPM 10 x 150 43001 1 £12.52 G86 10 150 92 ClipPM 10 x 200 42991 1 £20.55 G86 10 200 119 ClipPM 10 x 300 42992 1 £20.78 G86 10 300 249 ClipPM 11 x 150 42982 1 £11.34 G86 11 150 92 ClipPM 12 x 150 43008 1 £14.16 G86 12 150 92 ClipPM 12 x 300 42993 1 £21.49 G86 12 300 249 ClipPM 13 x 150 42983 1 £16.30 G86 13 150 92 ClipPM 14 x 150 43009 1 £18.89 G86 14 150 91 ClipPM 14 x 300 42994 1 £26.22 G86 14 300 249 ClipPM 16 x 150 43010 1 £21.72 G86 16 150 79 ClipPM 16 x 300 43002 1 £34.71 G86 16 300 249 ClipPM 18 x 160 43011 1 £31.17 G86 18 160 89 ClipPM 20 x 160 42985 1 £30.46 G86 20 160 89 Clip
TM - Trade masonry drill bit
Items to order onlySales unit £ Price
per pieceDiscount
groupDiameter Total length Working length Pack type
Item Art.-No. [pcs] [mm] [mm] [mm] [qty]
TM 5 x 85 43021 1 £3.12 G87 5 85 45 ClipTM 5.5 x 85 43022 1 £3.26 G87 5.5 85 45 ClipTM 5.5 x 150 43017 1 £3.69 G87 5.5 150 100 ClipTM 6 x 100 43023 1 £3.40 G87 6 100 55 ClipTM 6 x 150 43018 1 £4.39 G87 6 150 100 ClipTM 6.5 x 100 43024 1 £2.97 G87 6.5 100 55 ClipTM 7 x 150 43019 1 £5.24 G87 7 150 100 ClipTM 8 x 120 43026 1 £3.54 G87 8 120 65 ClipTM 8 x 200 43015 1 £7.22 G87 8 200 80 ClipTM 10 x 120 43027 1 £3.97 G87 10 120 65 ClipTM 10 x 150 43014 1 £4.96 G87 10 150 100 ClipTM 10 x 200 43016 1 £9.07 G87 10 200 80 ClipTM 12 x 150 43028 1 £4.96 G87 12 150 100 ClipTM 14 x 150 43030 1 £6.24 G87 14 150 100 Clip
76 DRILL BITS | DRIVE BITS
WB - Brad point drill bit
Items to order onlySales unit £ Price
per pieceDiscount
groupDiameter Total length Working length Pack type
Item Art.-No. [pcs] [mm] [mm] [mm] [qty]
WB 3 x 60 43031 1 £3.54 G88 3 61 33 ClipWB 4 x 75 43032 1 £3.90 G88 4 75 43 ClipWB 5 x 85 43033 1 £3.72 G88 5 86 52 ClipWB 6 x 90 43034 1 £4.25 G88 6 93 57 ClipWB 7 x 105 43035 1 £5.31 G88 7 105 65 ClipWB 8 x 115 43036 1 £5.67 G88 8 117 75 ClipWB 10 x 130 43037 1 £6.91 G88 10 133 87 Clip
FW - Flat wood drill bit
Items to order onlySales unit £ Price
per pieceDiscount
groupDiameter Total length Pack type
Item Art.-No. [pcs] [mm] [mm] [qty]
FW 8 x 150 43038 1 £3.26 G88 8 150 ClipFW 10 x 150 43039 1 £4.39 G88 10 150 ClipFW 12 x 150 523793 1 £4.73 G88 10 150 Clip
FW 13 x 150 523795 1 £4.78 G88 10 150 ClipFW 14 x 150 43040 1 £4.82 G88 14 150 ClipFW 16 x 150 43041 1 £5.10 G88 16 150 ClipFW 18 x 150 43042 1 £5.32 G88 18 150 ClipFW 20 x 150 43043 1 £5.52 G88 20 150 ClipFW 22 x 150 43044 1 £5.81 G88 22 150 ClipFW 25 x 150 43045 1 £6.66 G88 25 150 ClipFW 28 x 160 43046 1 £7.43 G88 28 160 ClipFW 32 x 160 43047 1 £8.22 G88 32 160 ClipFW 38 x 160 43048 1 £10.21 G88 38 160 Clip
HSS - High speed steel drill bit
Items to order onlySales unit
£ Price
per pieceDiscount
groupTotal length Working length Total length Pack type
Item Art.-No. [pcs] [mm] [mm] [mm] [qty]
HSS 1.0 43060 1 £2.40 G89 1.0 34 12 ClipHSS 2.0 43061 1 £2.47 G89 2.0 49 24 ClipHSS 2.5 43062 1 £2.53 G89 2.5 57 30 ClipHSS 3.0 43063 1 £2.58 G89 3.0 61 33 ClipHSS 3.5 43064 1 £2.64 G89 3.5 70 39 ClipHSS 4.0 43065 1 £2.68 G89 4.0 75 43 ClipHSS 4.5 43066 1 £2.72 G89 4.5 80 47 ClipHSS 5.0 43067 1 £2.74 G89 5.0 86 52 ClipHSS 5.5 43068 1 £2.81 G89 5.5 93 57 ClipHSS 6.0 43069 1 £2.86 G89 6.0 93 57 ClipHSS 6.5 43070 1 £2.97 G89 6.5 101 63 ClipHSS 7.0 43071 1 £3.12 G89 7.0 109 69 ClipHSS 8.0 43072 1 £3.54 G89 8.0 117 75 ClipHSS 9.0 43073 1 £4.25 G89 9.0 125 81 ClipHSS 10.0 43074 1 £4.82 G89 10.0 133 87 ClipHSS 11.0 43075 1 £5.81 G89 11.0 142 94 ClipHSS 12.0 43076 1 £6.66 G89 12.0 151 101 ClipHSS 13.0 43077 1 £8.36 G89 13.0 125 105 Clip
77
For full product details please refer to the Main Catalogue Section
DRILL BITS | DRIVE BITS
AUGER Drill bit
Items to order onlySales unit
£ Price
per pieceDiscount
groupTotal length Pack type Pack type
Item Art.-No. [pcs] [mm] [qty]Auger Bit 10 x 235 47912 1 £15.90 G88 10 235 ClipAuger Bit 12 x 235 47913 1 £16.84 G88 12 235 ClipAuger Bit 14 x 235 47914 1 £18.10 G88 14 235 ClipAuger Bit 16 x 235 47915 1 £22.35 G88 16 235 ClipAuger Bit 18 x 235 47916 1 £25.66 G88 18 235 ClipAuger Bit 19 x 235 47917 1 £26.61 G88 19 235 ClipAuger Bit 20 x 235 47918 1 £27.87 G88 20 235 ClipAuger Bit 22 x 235 47919 1 £32.91 G88 22 235 ClipAuger Bit 25 x 235 47921 1 £36.53 G88 25 235 ClipAuger Bit 28 x 235 47923 1 £47.16 G88 28 235 ClipAuger Bit 32 x 235 47925 1 £52.74 G88 32 235 Clip
FPB - Profi drive | Screwdriver bits
Items to order onlySales unit
£ Price per box
Discount group
Version Length Pack type
Item Art.-No. [pcs]
FPB T 20 PROFI BIT B10 508473 1 £26.92 G94 TX Star recess 25 PolybagFPB T 25 PROFI BIT B10 508474 1 £26.92 G94 TX Star recess 25 PolybagFPB T 30 PROFI BIT B10 508476 1 £26.92 G94 TX Star recess 25 PolybagFPB T 40 PROFI BIT B10 508477 1 £26.92 G94 TX Star recess 25 PolybagFPB T 50 PROFI BIT B5 508478 1 £19.63 G94 Cross drive PZ 25 PolybagFPB PH 1 PROFI BIT B10 508479 1 £16.82 G94 Cross drive PZ 25 PolybagFPB PH 2 PROFI BIT B10 508480 1 £16.82 G94 Cross drive PZ 25 PolybagFPB PH 3 PROFI BIT B10 508481 1 £16.82 G94 Cross drive PZ 25 PolybagFPB PZ 1 PROFI BIT B10 508482 1 £16.82 G94 Cross drive PZ 25 PolybagFPB PZ 2 PROFI BIT B10 508483 1 £16.82 G94 Cross drive PZ 25 PolybagFPB PZ 3 PROFI BIT B10 508484 1 £16.82 G94 Cross drive PZ 25 PolybagFPB PZ 4 PROFI BIT B5 508485 1 £19.63 G94 Cross drive PZ 25 Polybag
T = TORXPH = PHILIPSPZ = POZI
78
Quick-fix Strap
Items to order onlySales unit
£ Price
per pieceDiscount
groupLength Profile Profile thickness
Item Art.-No. [pcs] [mm] [mm]
Quick-fix strap 1M 42975 10 £12.62 G85 1000 3/50 3Quick-fix strap 2M 48179 10 £25.16 G85 2000 3/50 3
A patented hole punched design steel strap
Quick-fix Back plate
Sales unit
£ Price per 100 pieces
Discount group
Length Profile Profile thickness
Item Art.-No. [pcs] [mm] [mm]
Quick-fix back plates 42974 50 £41.73 G85 50 x 70 3/50 3
For fixing ancillary items using self tapping screws
Quick-fix Pliers
Sales unit
£ Price per piece
Discount group
Length Profile Profile thickness
Item Art.-No. [pcs] [mm] [mm]
Quick-fix pliers 42976 1 £157.02 G85 - - -
For bending strap. Constructed of ridged steel.
Quick-fix Starter kit
Sales unit
£ Price per piece
Discount group
Content
Item Art.-No. [pcs]
Quick-fix starter kit 42977 1 £168.83 G85 10 x back plates & 1 x pliers Use only with Quick-fix strapping
Portable product case.
QUICK-FIX Versatile Bracket System
79
For full product details please refer to the Main Catalogue Section
FPF - SZ Chipboard screw
Sales unit £ Price per 100 pieces
Discount group
Size metric Pozi bit
Item Art.-No. ETA [pcs] [mm]
FPF-SZ 3,5x16 YZF 200 653852 ■ 200 £2.77 A01 3.5x16 PZ2
FPF-SZ 3,5x20 YZF 200 653853 ■ 200 £3.02 A01 3.5x20 PZ2FPF-SZ 3,5x25 YZF 200 653854 ■ 200 £3.35 A01 3.5x25 PZ2FPF-SZ 3,5x30 YZF 200 653855 ■ 200 £3.67 A01 3.5x30 PZ2FPF-SZ 3,5x40 YZP 200 653856 ■ 200 £5.17 A01 3.5x40 PZ2FPF-SZ 3,5x50 YZP 200 653857 ■ 200 £5.46 A01 3.5x50 PZ2FPF-SZ 4,0x20 YZF 200 653858 ■ 200 £3.62 A01 4.0x20 PZ2FPF-SZ 4,0x25 YZF 200 653859 ■ 200 £4.10 A01 4.0x25 PZ2FPF-SZ 4,0x30 YZF 200 653860 ■ 200 £4.37 A01 4.0x30 PZ2FPF-SZ 4,0x35 YZP 200 653861 ■ 200 £4.99 A01 4.0x35 PZ2FPF-SZ 4,0x40 YZP 200 653862 ■ 200 £5.90 A01 4.0x40 PZ2FPF-SZ 4,0x45 YZP 200 653863 ■ 200 £6.74 A01 4.0x45 PZ2FPF-SZ 4,0x50 YZP 200 653176 ■ 200 £7.52 A01 4.0x50 PZ2FPF-SZ 4,0x60 YZP 200 653182 ■ 200 £9.21 A01 4.0x60 PZ2FPF-SZ 4,0x70 YZP 200 653186 ■ 200 £9.60 A01 4.0x70 PZ2FPF-SZ 4,5x50 YZP 200 653230 ■ 200 £9.33 A01 4.5x50 PZ2FPF-SZ 4,5x60 YZP 200 653237 ■ 200 £11.92 A01 4.5x60 PZ2FPF-SZ 4,5x70 YZP 200 653241 ■ 200 £18.06 A01 4.5x70 PZ2FPF-SZ 4,5x80 YZP 200 653246 ■ 200 £19.85 A01 4.5x80 PZ2FPF-SZ 5,0x40 YZP 200 653269 ■ 200 £9.03 A01 5.0x40 PZ2FPF-SZ 5,0x50 YZP 200 653281 ■ 200 £10.81 A01 5.0x50 PZ2FPF-SZ 5,0x60 YZP 100 653864 ■ 100 £13.11 A01 5.0x60 PZ2FPF-SZ 5,0x70 YZP 100 653294 ■ 100 £18.77 A01 5.0x70 PZ2FPF-SZ 5,0x80 YZP 100 653298 ■ 100 £21.90 A01 5.0x80 PZ2FPF-SZ 5,0x90 YZP 100 653301 ■ 100 £28.77 A01 5.0x90 PZ2FPF-SZ 5,0x100 YZP 100 653305 ■ 100 £31.29 A01 5.0x100 PZ2FPF-SZ 6,0x50 YZP 100 653337 ■ 100 £15.64 A01 6.0x50 PZ3FPF-SZ 6,0x60 YZP 100 653344 ■ 100 £18.66 A01 6.0x60 PZ3FPF-SZ 6,0x80 YZP 100 653352 ■ 100 £25.28 A01 6.0x80 PZ3FPF-SZ 6,0x100 YZP 100 653360 ■ 100 £32.50 A01 6.0x100 PZ3
SCREWS - PowerFast®
FPF - A2 Chipboard screw
Items to order onlySales unit £ Price
per 100 piecesDiscount
groupSize metric Pozi bit
Item Art.-No. ETA [pcs] [mm]
FPF-SZ 3,5X30 A2F 100 657152 ■ 100 £15.64 A05 3.5x30 PZ2FPF-SZ 3,5X40 A2P 100 657158 ■ 100 £19.14 A05 3.5x40 PZ2FPF-SZ 4,0X20 A2F 100 657160 ■ 100 £14.68 A05 4.0x20 PZ2FPF-SZ 4,0X60 A2P 100 657181 ■ 100 £30.57 A05 4.0x60 PZ2FPF-SZ 4,0X70 A2P 100 657182 ■ 100 £37.32 A05 4.0x70 PZ2FPF-SZ 5,0X100 A2P 50 657235 ■ 50 £82.20 A05 5.0 x100 PZ2
80 SCREWS - PowerFast® Construction Screws
FPF-ST YZP Construction screw - Countersunk
Items to order onlySales unit £ Price
per 100 piecesDiscount
groupDiameter Overall
LengthThread length
Headdiameter
Drive
Item Art.-No. ETA [pcs] [mm] [mm] [mm] [mm]
FPF-ST 8 x 80 YZP 75 659189 ■ 75 £44.36 A01 8 80 50 14.8 TX40FPF-ST 8 x 100 YZP 75 659190 ■ 75 £51.93 A01 8 100 50 14.8 TX40FPF-ST 8 x 120 YZP 75 659191 ■ 75 £64.01 A01 8 120 75 14.8 TX40FPF-ST 8 x 140 YZP 75 659192 ■ 75 £76.91 A01 8 140 75 14.8 TX40FPF-ST 8 x 160 YZP 75 659193 ■ 75 £89.67 A01 8 160 75 14.8 TX40FPF-ST 8 x 180 YZP 75 659194 ■ 75 £109.18 A01 8 180 75 14.8 TX40FPF-ST 8 x 200 YZP 75 659195 ■ 75 £133.82 A01 8 200 100 14.8 TX40FPF-ST 8 x 220 YZP 75 659196 ■ 75 £158.32 A01 8 220 100 14.8 TX40FPF-ST 8 x 240 YZP 75 659197 ■ 75 £175.79 A01 8 240 100 14.8 TX40FPF-ST 8 x 260 YZP 75 659198 ■ 75 £191.89 A01 8 260 100 14.8 TX40FPF-ST 8 x 280 YZP 75 659199 ■ 75 £209.84 A01 8 280 100 14.8 TX40FPF-ST 8 x 300 YZP 75 659200 ■ 75 £239.45 A01 8 300 100 14.8 TX40FPF-ST 8 x 320 YZP 75 659201 ■ 75 £267.16 A01 8 320 100 14.8 TX40FPF-ST 8 x 340 YZP 75 659202 ■ 75 £292.06 A01 8 340 100 14.8 TX40FPF-ST 8 x 360 YZP 75 659203 ■ 75 £319.50 A01 8 360 100 14.8 TX40FPF-ST 8 x 380 YZP 75 659204 ■ 75 £349.66 A01 8 380 100 14.8 TX40FPF-ST 8 x 400 YZP 75 659205 ■ 75 £382.82 A01 8 400 100 14.8 TX40
FPF-ST 10 x 80 YZP 50 659208 ■ 50 £63.60 A01 10 80 52 18.6 TX40FPF-ST 10 x 100 YZP 50 659209 ■ 50 £78.48 A01 10 100 52 18.6 TX40FPF-ST 10 x 120 YZP 50 659210 ■ 50 £89.19 A01 10 120 80 18.6 TX40FPF-ST 10 x 140 YZP 50 659211 ■ 50 £112.32 A01 10 140 80 18.6 TX40FPF-ST 10 x 160 YZP 50 659212 ■ 50 £133.95 A01 10 160 80 18.6 TX40FPF-ST 10 x 180 YZP 50 659213 ■ 50 £154.09 A01 10 180 80 18.6 TX40FPF-ST 10 x 200 YZP 50 659214 ■ 50 £175.72 A01 10 200 80 18.6 TX40FPF-ST 10 x 220 YZP 50 659215 ■ 50 £199.80 A01 10 220 80 18.6 TX40FPF-ST 10 x 240 YZP 50 659216 ■ 50 £223.96 A01 10 240 80 18.6 TX40FPF-ST 10 x 260 YZP 50 659217 ■ 50 £251.46 A01 10 260 80 18.6 TX40FPF-ST 10 x 280 YZP 50 659218 ■ 50 £282.38 A01 10 280 80 18.6 TX40FPF-ST 10 x 300 YZP 50 659219 ■ 50 £349.73 A01 10 300 80 18.6 TX40FPF-ST 10 x 320 YZP 50 659220 ■ 50 £388.28 A01 10 320 80 18.6 TX40FPF-ST 10 x 340 YZP 50 659221 ■ 50 £425.34 A01 10 340 80 18.6 TX40FPF-ST 10 x 360 YZP 50 659222 ■ 50 £466.21 A01 10 360 80 18.6 TX40FPF-ST 10 x 380 YZP 50 659223 ■ 50 £510.85 A01 10 380 80 18.6 TX40FPF-ST 10 x 400 YZP 50 659224 ■ 50 £560.19 A01 10 400 80 18.6 TX40
FPF - Assortment boxes
Sales unit £ Price per 100 pieces
Discount group
Assorted sizes Pieces perbox
Item Art.-No. [pcs] [mm]
FPF M 2300 667001 1 £226.27 A01 see table below 2300 screwsFPF M 1350 667002 1 £175.73 A01 see table below 1350 screwsFPF P 245 667004 1 £36.11 A01 see table below 245 screws
FPF M 2300 FPF M 1350 FPF P 245Note: Boxes 1 & 2 made of metal, box 3 made of durable plastic. For screw sizes please refer to the table below
Assortment screw sizes type sizes
FPF M 2300 300 X 3.5x16 / 250 X 3.5x20 / 250 X 3.5x25 / 200 X 3.5x30 /120 X 3.5x40 / 100 X 3.5x50 / 150 X 4.0x25 / 140 X 4.0x30 / 110 X 4.0x35 / 100 X 40x40 /60 X 4.5x50 / 60 X 5.0x50 / 100 X 5.0x60 / 90 X 5.0x70 / 60 X 6.0x60 / 50 X 6.0x100
FPF M 1350 100 X 3.5x25 /100 X 3.5x30 / 150 X 3.5x40 / 200 X 4.0x25 / 150 X 4.0x30/ 150 X 4.0x40 / 100 X 4.0x50 / 100 X 5.0x40 / 100 X 5.0x50 / 100 X 5.0x60 / 100 X 5.0x80
FPF P 245 3.5x16 / 3.5x30 / 4.0x30 / 4.0x35 / 4.0x40 / 4.5x50 / 5.0x60
European Technical Approval -
for self-tapping screws in timber structures
ETA-12/0073
81
For full product details please refer to the Main Catalogue Section
Washers for countersunk heads
Zinc plated
Sales unit £ Price per 100 pieces
Discount group
Inner holediameter
do
Outer edgediameter
dl
Item Art.-No. [pcs] [mm] [mm]
FWC-CS 8 x 50 666169 50 £90.99 A01 8.7 30
FWC-CS 4 x 50 666170 50 £108.88 A01 11.2 35
FPF-WT YZP Construction screw - Flange head
Items to order onlySales unit £ Price
per 100 piecesDiscount
groupDiameter Overall
LengthThread length
Head diameter
Drive
Item Art.-No. ETA [pcs] [mm] [mm] [mm] [mm]
FPF-WT 8 x 80 YZP 50 659244 ■ 50 £52.75 A01 8 80 50 21 TX40
FPF-WT 8 x 100 YZP 50 659245 ■ 50 £64.76 A01 8 100 50 21 TX40
FPF-WT 8 x 120 YZP 50 659246 ■ 50 £81.82 A01 8 120 75 21 TX40
FPF-WT 8 x 140 YZP 50 659247 ■ 50 £92.26 A01 8 140 75 21 TX40
FPF-WT 8 x 160 YZP 50 659248 ■ 50 £116.21 A01 8 160 75 21 TX40
FPF-WT 8 x 180 YZP 50 659249 ■ 50 £123.31 A01 8 180 75 21 TX40
FPF-WT 8 x 200 YZP 50 659250 ■ 50 £145.35 A01 8 200 100 21 TX40
FPF-WT 8 x 220 YZP 50 659251 ■ 50 £180.63 A01 8 220 100 21 TX40
FPF-WT 8 x 240 YZP 50 659252 ■ 50 £190.26 A01 8 240 100 21 TX40
FPF-WT 8 x 260 YZP 50 659253 ■ 50 £216.53 A01 8 260 100 21 TX40
FPF-WT 8 x 280 YZP 50 659254 ■ 50 £236.59 A01 8 280 100 21 TX40
FPF-WT 8 x 300 YZP 50 659255 ■ 50 £292.48 A01 8 300 100 21 TX40
FPF-WT 8 x 320 YZP 50 659256 ■ 50 £329.60 A01 8 320 100 21 TX40
FPF-WT 8 x 340 YZP 50 659257 ■ 50 £358.66 A01 8 340 100 21 TX40
FPF-WT 8 x 360 YZP 50 659258 ■ 50 £390.81 A01 8 360 100 21 TX40
FPF-WT 8 x 380 YZP 50 659259 ■ 50 £425.55 A01 8 380 100 21 TX40
FPF-WT 8 x 400 YZP 50 659260 ■ 50 £464.37 A01 8 400 100 21 TX40
FPF-WT 10 x 100 YZP 25 659264 ■ 25 £96.09 A01 10 100 52 27 TX40
FPF-WT 10 x 120 YZP 25 659265 ■ 25 £113.96 A01 10 120 80 27 TX40
FPF-WT 10 x 140 YZP 25 659266 ■ 25 £135.73 A01 10 140 80 27 TX40
FPF-WT 10 x 160 YZP 25 659267 ■ 25 £171.01 A01 10 160 80 27 TX40
FPF-WT 10 x 180 YZP 25 659268 ■ 25 £196.80 A01 10 180 80 27 TX40
FPF-WT 10 x 200 YZP 25 659269 ■ 25 £223.14 A01 10 200 80 27 TX40
FPF-WT 10 x 220 YZP 25 659270 ■ 25 £245.04 A01 10 220 80 27 TX40
FPF-WT 10 x 240 YZP 25 659271 ■ 25 £288.86 A01 10 240 80 27 TX40
FPF-WT 10 x 260 YZP 25 659272 ■ 25 £323.12 A01 10 260 80 27 TX40
FPF-WT 10 x 280 YZP 25 659273 ■ 25 £352.74 A01 10 280 80 27 TX40
FPF-WT 10 x 300 YZP 25 659274 ■ 25 £387.06 A01 10 300 80 27 TX40
FPF-WT 10 x 320 YZP 25 659275 ■ 25 £447.72 A01 10 320 80 27 TX40
FPF-WT 10 x 340 YZP 25 659276 ■ 25 £488.80 A01 10 340 80 27 TX40
FPF-WT 10 x 360 YZP 25 659277 ■ 25 £533.90 A01 10 360 80 27 TX40
FPF-WT 10 x 380 YZP 25 659278 ■ 25 £582.22 A01 10 380 80 27 TX40
FPF-WT 10 x 400 YZP 25 659279 ■ 25 £633.28 A01 10 400 80 27 TX40
SCREWS - PowerFast® Construction Screws
European Technical Approval -
for self-tapping screws in timber structures
ETA-12/0073
82 SCREWS - PowerFast® Construction Screws
European Technical Approval -
for self-tapping screws in timber structures
ETA-12/0073
FPF-ZT ZPF Powerful Construction screw range
Items to order onlySales unit £ Price
per 100 piecesDiscount
groupThread
ØLength Head
ØHight of
headDrive
Item Art.-No. ETA [pcs] [mm] [mm] [mm] [mm]
FPF-ZT 6,5X120 ZPF 100 659299 ■ 100 £85.30 A01 6.5 120 8 5,5 TX30FPF-ZT 6,5X140 ZPF 100 659300 ■ 100 £109.18 A01 6.5 140 8 5,5 TX30FPF-ZT 6,5X160 ZPF 100 659301 ■ 100 £133.07 A01 6.5 160 8 5,5 TX30FPF-ZT 6,5X195 ZPF 100 659302 ■ 100 £187.66 A01 6.5 195 8 5,5 TX30
FPF-ZT 8,0X155 ZPF 50 659303 ■ 50 £225.19 A01 8 155 10 7 TX40FPF-ZT 8,0X195 ZPF 50 659304 ■ 50 £300.26 A01 8 195 10 7 TX40FPF-ZT 8,0X220 ZPF 50 659305 ■ 50 £354.85 A01 8 220 10 7 TX40FPF-ZT 8,0X245 ZPF 50 659306 ■ 50 £409.44 A01 8 245 10 7 TX40FPF-ZT 8,0X295 ZPF 50 659307 ■ 50 £484.50 A01 8 295 10 7 TX40FPF-ZT 8,0X330 ZPF 50 659308 ■ 50 £689.23 A01 8 330 10 7 TX40FPF-ZT 8,0X375 ZPF 50 659309 ■ 50 £825.71 A01 8 375 10 7 TX40FPF-ZT 8,0X400 ZPF 50 659310 ■ 50 £907.59 A01 8 400 10 7 TX40
FPF-ZT 10,0X300 ZPF 25 659311 ■ 25 £969.01 A01 10 300 16 6,5 TX50FPF-ZT 10,0X330 ZPF 25 659312 ■ 25 £1,139.61 A01 10 330 16 6,5 TX50FPF-ZT 10,0X360 ZPF 25 659313 ■ 25 £1,276.09 A01 10 360 16 6,5 TX50FPF-ZT 10,0X400 ZPF 25 659314 ■ 25 £1,480.80 A01 10 400 16 6,5 TX50FPF-ZT 10,0X450 ZPF 25 659315 ■ 25 £1,774.24 A01 10 450 16 6,5 TX50FPF-ZT 10,0X500 ZPF 25 659316 ■ 25 £2,094.97 A01 10 500 16 6,5 TX50FPF-ZT 10,0X550 ZPF 25 659317 ■ 25 £2,456.64 A01 10 550 16 6,5 TX50FPF-ZT 10,0X600 ZPF 25 659318 ■ 25 £2,811.48 A01 10 600 16 6,5 TX50
HWK - Site boxes / Tool Tray
Sales unit £ Price per piece
Discount group
Box dimensions
Item Art.-No. [pcs]
HWK site box small 91524 1 £20.63 G67 400 Wide x 300 Deep x 130 HighHWK site box large 91425 1 £23.70 G67 400 Wide x 300 Deep x 230 HighTool tray 60524 1 £11.84 G67 -
TDS Decking screw
Sales unit £ Price per pack
Discount group
Dimensions
Item Art.-No. [pcs]
TDS 500 42837 1 £16.05 G73 200 x Decking screw 8x2 (4x50)TDS 502 42839 1 £18.84 G73 200 x Decking screw 8x2½ (4x65)TDS 503 42840 1 £15.05 G73 150 x Decking screw 8x3 (4x75)Note: For hardwood use stainless steel screws
Decking screws with weather resistant coating for exterior timber applications. Recommended for soft wood decking .
COMPLIMENTARY PRODUCTS
83
For full product details please refer to the Main Catalogue Section
FIRESTOP FOAM Sales unit £ Price
per piece Discount
groupContent Max foam
yield per 1000mlItem Art.-No. [pcs] [ml]
FireStop Hand Foam 42757 12 £30.32 G64 750 35
FireStop Gun Foam 43712 12 £29.33 G64 750 35
Professional Metal Gun 33208 1 £58.84 G60 - -
FIRESTOP Product Price List
MASTIC & SILICONE SEALANTS
Items to order onlySales unit £ Price
per pieceDiscount
groupContent
Item Art.-No. [pcs] [ml]
FiAM 600 56006 1 £8.89 G64 600
FiAM 310 53011 1 £5.33 G64 310
FFRS Fire Rated Silicone-Grey 512374 1 £16.11 G65 310
FFRS Fire Rated Silicone-White 518778 1 £16.11 G65 310
FiGM - PFS+ 508765 1 £16.20 G65 310
KP M2 Professional gun 53117 1 £42.11 G60 -
PF 600 Gun 600ml 97967 1 £138.77 G64 -
Approved CF 5034 / 5093/5151
FiPP PUTTY PADS
Sales unit £ Price per pack
Discount group
Fire rating Size Colour
Item Art.-No. [pcs] [hrs] [mm]
FiPP I-D (230x170) - Int. Double 54757 1 £11.19 G64 2 230 x 170 Red
FiPP I-S (170X170) - Int. Single 53578 1 £7.99 G64 2 170 x 170 Red
FiPP E-D (210X180) - Ext. Double 506262 1 £13.68 G64 2 155 x 155 Red
FiPP E-S (155X155) - Ext. Single 506261 1 £12.26 G64 2 210 x 180 Red
84
FiFS INSULATED FIRE SLEEVE
Items to order onlySales unit £ Price
per pieceDiscount
groupFire rating Weight
Item Art.-No. [pcs] [hrs] [Kg]
FiFS/17 53051 1 £62.91 G65 2* 300mm x 80mm
FiFS/21 53052 1 £72.13 G65 2* 300mm x 80mm
FiFS/27 53130 1 £76.88 G65 2* 300mm x 83mm
FiFS/34 53171 1 £80.10 G65 2* 300mm x 85mm
FiFS/42 53172 1 £82.59 G65 2* 300mm x 100mm
FiFS/48 53174 1 £100.73 G65 2* 300mm x 107mm
FiFS/54 53175 1 £76.59 G65 2* 300mm x 113mm
FiFS/60 53176 1 £78.05 G65 2* 300mm x 120mm
FiFS/67 53177 1 £79.51 G65 2* 300mm x 128mm
FiFS/76 53181 1 £95.02 G65 2* 300mm x 133mm
FiFS/80 53186 1 £86.83 G65 2* 300mm x 140mm
FiFS/89 53190 1 £94.14 G65 2* 300mm x 145mm
FiFS/108 53195 1 £100.73 G65 2* 300mm x 158mm
FiFS/114 53230 1 £112.36 G65 2* 300mm x 160mm
FiFS/140 53231 1 £116.82 G65 2* 300mm x 195mm
FiFS/169 53232 1 £131.45 G65 2* 300mm x 225mm*Fire rating dependant on pipe material and substrate. See FireStop Handbook for more info.
FFC Fire Collars
Items to order onlySales unit £ Price
per pieceDiscount
groupFire rating Diameter of
pipework
Item Art.-No. [pcs] [hrs] [mm]
FFC2/30-32 52456 1 £27.51 G64 2 30-32
FFC2/38-40 52480 1 £28.76 G64 2 38-40
FFC2/55 52481 1 £24.69 G64 2 55
FFC2/63 52482 1 £27.35 G64 2 63
FFC2/75 52483 1 £28.84 G64 2 75
FFC2/82 52486 1 £26.02 G64 2 82
FFC2/90 52487 1 £30.25 G64 2 90
FFC2/110 52488 1 £34.17 G64 2 110
FFC2/125 52489 1 £41.30 G64 2 125
FFC2/160 52500 1 £66.31 G64 2 160
FFC2/200 52501 1 £121.40 G64 2 200
FFC4/30-32 52502 1 £25.09 G65 4 30-32
FFC4/38-40 52503 1 £26.33 G65 4 38-40
FFC4/55 52532 1 £28.82 G65 4 55
FFC4/63 52533 1 £30.14 G65 4 63
FFC4/75 52535 1 £29.92 G65 4 75
FFC4/82 52536 1 £28.82 G65 4 82
FFC4/90 52537 1 £31.45 G65 4 90
FFC4/110 52539 1 £36.94 G65 4 110
FFC4/125 52540 1 £37.45 G65 4 125
FFC4/160 52545 1 £67.15 G65 4 160
FIRESTOP Product Price List
85
For full product details please refer to the Main Catalogue Section
FIRESTOP Product Price List
FiPW PIPE WRAP
Items to order only Sales unit £ Price per piece
Discount group
Fire rating Outside diameter of pipe work
Item Art.-No. [pcs] [hrs] [mm]
FiPW 2 / 30-32 52546 1 £7.27 G64 2 30-32
FiPW 2 / 38-40 52547 1 £6.35 G64 2 38-40
FiPW 2 / 55 52548 1 £6.94 G64 2 55
FiPW 2 / 63 52560 1 £8.03 G64 2 63
FiPW 2 / 75 52561 1 £11.79 G64 2 75
FiPW 2 / 82 52562 1 £15.47 G64 2 82
FiPW 2 / 110 52563 1 £15.55 G64 2 110
FiPW 2 / 125 52890 1 £18.22 G64 2 125
FiPW 2 / 160 52891 1 £51.33 G64 2 160
FiPW 2 / 200 53000 1 £111.27 G64 1 200
FiPW 4 / 30-32 53002 1 £8.19 G65 4 30-32
FiPW 4 / 38-40 53003 1 £9.03 G65 4 38-40
FiPW 4 / 55 53004 1 £12.21 G65 4 55
FiPW 4 / 63 53005 1 £10.95 G65 4 63
FiPW 4 / 75 53006 1 £13.13 G65 4 75
FiPW 4 / 82 53007 1 £14.80 G65 4 82
FiPW 4 / 110 53008 1 £22.32 G65 4 110
FiPW 4 / 125 53009 1 £26.75 G65 4 125
FIPW 4 / 160 53010 1 £56.10 G65 4 160
Approved 5036
FCPS COATED PANEL
Sales unit £ Price per piece
Discount group
Size
Item Art.-No. [pcs]
FCPS 1200x600x50 53252 1 £56.64 G64 1200mm x 600mm x 50mm
FCP/5lt 53253 1 £99.93 G64
Approved CF 5037
FFSC COMPOUNDSales unit £ Price
per piece Discount
groupFire rating Weight
Item Art.-No. [pcs] [hrs] [gms]
FFSC 53012 1 £75.42 G64 Up to 6 22kg
PILLOWS
Items to order only Sales unit £ Price per piece
Discount group
Size
Item Art.-No. [pcs]
FiP / Sml 516960 1 £10.54 G64 330mm x 50mm x 20*mm
FiP / Med 516959 1 £18.08 G64 330mm x 200mm x 25*mm
FiP / Lge 516958 1 £23.38 G64 330mm x 200mm x 45*mm
* Ensure correct pillow is installed to suit opening. See FireStop Handbook for more info.
Approved CF 5037
86
FCID CAST IN DEVICES
Items to order onlySales unit £ Price
per piece Discount
groupTo suit Key dimensions
Item Art.-No. [pcs] [Kg]
FCID 65 509532 1 £91.19 G64 Nom 3“/ 75mm Pipe 95mm OD X 250mm High - Base = 154 x 154mmFCID 100 506324 1 £123.79 G64 Nom 4“/110mm Pipe 140mm OD x 250mm High - Base = 198 x 198mmFCID 150 509533 1 £197.97 G64 Nom 6“/160mm Pipe 194mm OD x 250mm High - Base = 253 x 253mmFCID 65-E/1000 Ext. Sleeves 509791 1 £21.95 G64 FCiD 65 CI Device 95mm ID x 101mm OD x 1000mm longFCID100-E/1000 Ext. Sleeves 509792 1 £18.81 G64 FCiD100 CI Device 140mm ID x 147mm OD x 1000mm longFCID150-E/1000 Ext. Sleeves 509793 1 £28.22 G64 FCiD150 CI Device 194mm ID x 201mm OD x 1000mm longFCID 65-CP Cap Plug 510878 1 £2.74 G64 FCiD 65 CI Device 88.14 - 91.44mm Tapered OD x 19.05mm HighFCID 100-CP Cap Plug 510879 1 £5.00 G64 FCiD 100 CI Device 131.58 - 136.15mm Tapered OD x 25.4mm HighFCID 150-CP Cap Plug 510880 1 £11.34 G64 FCiD 150 CI Device 186.44 - 194.32mm Tapered OD x 25.4mm HighFCID65E/C Extension Cap 511450 1 £2.74 G64 FCiD 65-E/1000 93.48 - 96.52mm Tapered OD x 19.05mm HighFCID100 E/C Extension Cap 509794 1 £5.00 G64 FCiD100-E/1000 138.94 - 142mm Tapered OD x 25.4mm HighFCID150 E/C Extension Cap 511451 1 £11.34 G64 FCiD150-E/1000 194.57 - 199.14mm Tapered OD x 25.4mm HighFCiD-MRF Recess Former 517846 1 £20.48 G64 FCiD100 CI Device 250-220 x 250-220 x 60mm Tapered Recess
FFB-VS FIRE|BARR ELASTOSEAL
Items to order only Sales unit £ Price per piece
Discount group
Fire rating Colour
Item Art.-No. [pcs] [Hrs]
FFB-ES/W 520753 1 £416.96 G49 2 White
FFB-ES/G 520755 1 £416.96 G49 2 Grey
FFB-ES/R 520756 1 £416.96 G49 2 Red
FFB-ES FIRE|BARR VENTISTOP
Items to order only Sales unit £ Price per piece
Discount group
Fire rating To suit cavity void width
Item Art.-No. [pcs] [Hrs] [mm]
FFB-VS/25-50 521520 1 £42.55 G49 1 25-50 FFB-VS/51-100 521521 1 £50.49 G49 1 51-100FFB-VS/101-150 521522 1 £58.19 G49 1 101-150FFB-VS/151-200 521523 1 £63.54 G49 1 151-200FFB-VS/201-250 521524 1 £71.39 G49 1 201-250FFB-VS/251-300 521525 1 £82.18 G49 1 251-300FFB-VS/301-350 521526 1 £89.20 G49 1 301-350FFB-VS/351-400 521527 1 £96.47 G49 1 351-400FFB-VS/401-450 521528 1 £103.58 G49 1 401-450
FFB-FM FIRE|BARR FLEXIMESCENT
Items to order only Sales unit £ Price per piece
Discount group
Fire rating To suit cavity void width
Item Art.-No. [pcs] [Hrs] [mm]
FFB-FM/25-50 521511 1 £29.43 G49 2 25-50FFB-FM/51-100 521512 1 £48.91 G49 2 51-100FFB-FM/101-150 521513 1 £56.01 G49 2 101-150FFB-FM/151-200 521514 1 £63.45 G49 2 151-200FFB-FM/201-250 521515 1 £71.90 G49 2 201-250FFB-FM/251-300 521516 1 £80.34 G49 2 251-300FFB-FM/301-350 521517 1 £87.03 G49 2 301-350FFB-FM/351-400 521518 1 £94.89 G49 2 351-400FFB-FM/401-450 521519 1 £100.15 G49 2 401-450
FIRESTOP Product Price List
87
For full product details please refer to the Main Catalogue Section
SOLAR-FIX Product Price List
SOLAR-FIX Sales unit £ Price per piece
Discount group
Item Art.-No. [pcs]
Solar-Fish 3.15m Aluminium Profile 514850 1 £27.08 G98
Solar-Fish 4.2m Aluminium Profile 514851 1 £38.13 G98
CPN AL SolarPlus Joint Profiles 514890 12 £3.09 G98
AK SP Cap for Solar-Fish Profiles 71183 1 £0.93 G98
AK SP Cap for Profiles BLACK 520909 1 £1.55 G98
CP AL Jont Profiles 514980 10 £5.89 G98
GT 130 A2 Stainless Steel Hook for Tiles 71198 10 £12.48 G98
GT 150 A2 Stainless Steel Hook for Tiles 571136 10 £14.74 G98
GTP A2 Stainless Steel Hook for flat Tiles 71199 10 £9.11 G98
GT R A2 Hook 71526 10 £20.31 G98
PMU preassembled middle and final clamp - fits all modules from 30 to 52 mm 519784 10 £4.20 G98
PMCU preassembled middle clamp fits all modules from 30 to 52 mm 519105 10 £3.72 G98
PMF 31 preassembled Final Clamp 511092 10 £4.25 G98
PMF 34 preassembled Final Clamp 571218 10 £4.27 G98
PMF 35 preassembled Final Clamp 571219 10 £4.27 G98
PMF 36 preassembled Final Clamp 571220 10 £4.52 G98
PMF 38 preassembled Final Clamp 571221 10 £4.52 G98
PMF 40 preassembled Final Clamp 571222 10 £4.52 G98
PMF 42 preassembled Final Clamp 571223 10 £4.52 G98
PMF 45 preassembled Final Clamp 71725 10 £4.36 G98
PMF 46 preassembled Final Clamp 71224 10 £4.36 G98
PMF 50 preassembled Final Clamp 71225 10 £4.36 G98
PMC 33-39 preassembled Middle Clamp 571214 10 £4.18 G98
PMC 38-44 preassembled Middle Clamp 571215 10 £4.23 G98
PMC 43-49 preassembled Middle Clamp 571216 10 £4.30 G98
PMC 48-54 preassembled Middle Clamp 571217 10 £4.34 G98
PMF 35 preassembled Final Clamp (Black) 520113 10 £3.40 G98
PMC 33-39 preassembled Middle Clamp (Black) 520112 10 £3.30 G98
FV-PS Panels Nylon Support 71877 4 £2.02 G98
STFN 25°-30°-35° adjustable preassembled triangular frame 511874 5 £60.99 G98
STFS 10°-13° adjustable preassembled triangular frame 512625 5 £31.70 G98
St. Steel A2 STSR M10x200 Stud Screw with Washer 71202 25 £4.42 G98
St. Steel A2 STSI M10x160 Self tapping Screw for steel with Washer 508954 50 £19.10 G98
SSP 10 A2 Joint Plate for STSR Screws 71205 25 £1.92 G98
MW SP A2 Stainless Steel Bracket for Profiles 71472 10 £3.46 G98
DLA A2 Stainless Steel Hook for Special Roofs 71556 10 £16.25 G98
Solar-flat - P400 0.396mt 512195 50 £4.85 G98
RS AL Solar-flat Rivet with gasket 509483 200 £0.60 G98
Solar-Premium 6 mt Aluminium Profile 71829 1 £175.67 G98
CP SM Solar-Premium Joint Profiles 71913 6 £17.59 G98
STF Premium 30° preassembled triangular frame 71888 2 £149.08 G98
FCN AL M8 Thk 6 mm Aluminium Hammer Nut Screw 571165 50 £1.00 G98
SKS 8x20 A2 Hex bolt 505614 100 £0.15 G98
RHS 8x20 A2 Hammer-Head Screw for Solar Plus Profiles 71207 50 £1.27 G98
FCN AL M8 Thk 6 mm Aluminium Hammer Nut Screw 571165 50 £1.00 G98
SKS 8x20 A2 Hex bolt 505614 100 £0.15 G98
RHS 8x20 A2 Hammer-Head Screw for Solar Plus Profiles 71207 50 £1.27 G98
MU-A M8 A2 Stainless Steel self-locking Nut 571192 100 £0.16 G98
MU F M10 A2 Stainless Steel hex. Flanged Nut 71952 100 £0.38 G98
BP AL 13x6 4mt Bracing for triangular Frame 71184 100 £7.61 G98
88 SAMONTEC - MECHANICAL & ELECTRICAL Product Price List
LINED CLAMPS Sales unit £ Price per 100 pieces
Discount group
Item Art.-No. [pcs]
FGRSPLUS12-15 M8/M10 79430 100 £143.14 G84FGRSPLUS 15-19 M8/M10 79431 100 £148.63 G84FGRSPLUS 20-24 M8/M10 79432 100 £151.21 G84FGRSPLUS 25-30 M8/M10 79433 100 £166.49 G84FGRS PLUS 32-37 M8/10 79434 100 £176.26 G84FGRSPLUS 40-45 M8/M10 79435 50 £184.07 G84FGRS PLUS48-53M8/M10 79436 50 £198.64 G84FGRS PLUS 54-58 M8/10 79437 50 £218.28 G84FGRSPLUS 59-63 M8/M10 79438 50 £233.70 G84FRS PLUS 12-15 79440 100 £143.82 G84FRS PLUS 15-19 79441 100 £148.34 G84FRS PLUS 20-24 79442 100 £154.85 G84FRS PLUS 25-30 79443 100 £159.78 G84FRS PLUS 32-37 79444 100 £167.02 G84FRS PLUS 40-45 79445 50 £183.59 G84FRS PLUS 48-53 79446 50 £194.88 G84FRS PLUS 54-58 79447 50 £244.22 G84FRS PLUS 59-63 79448 50 £295.65 G84FRS PLUS 62-64 79449 50 £319.13 G84FRS PLUS 68-73 79450 50 £350.78 G84FRS PLUS 74-78 79451 50 £434.24 G84FRS PLUS 82-86 79452 50 £437.67 G84FRS PLUS 3" 79453 50 £439.76 G84FRS PLUS 95-103 79454 50 £436.68 G84FRS PLUS 108-116 79455 50 £445.21 G84FRS M8/M10 12-15 510969 100 £114.03 G84FRS M8/M10 15-19 42535 100 £117.93 G84FRS M8/M10 20-24 42536 100 £124.89 G84FRS M8/M10 25-30 42537 100 £126.86 G84FRS M8/M10 32-37 42538 100 £133.42 G84FRS M8/M10 40-45 42554 50 £147.44 G84FRS M8/M10 48-54 510970 50 £164.27 G84FRS M8/M10 54-58 42555 50 £166.20 G84 FRS M8/M10 63-67 91488 50 £245.60 G84 FRS M8/M10 72-80 91489 25 £334.15 G84 FRS M8/M10 87-92 91505 25 £338.44 G84 FRS M8/M10 108-116 91506 20 £359.38 G84 FRS M8/M10 121-128 79456 10 £600.81 G84 FRS M8/M10 133-141 79457 10 £626.61 G84 FRS M8/M10 159-165 79458 8 £791.98 G84 FRS M8/M10 165-168 79459 8 £864.38 G84
UNLINED CLAMPS Sales unit £ Price per 100 pieces
Discount group
Item Art.-No. [pcs]
FRSN 15-19 M8/M10 49459 100 £134.23 G84FRSN 21-23 M8/M10 49789 100 £143.15 G84FRSN 26-28 M8/M10 49790 100 £145.53 G84FRSN 32-35 M8/M10 49793 100 £151.59 G84FRSN 40-43 M8/M10 49794 50 £168.17 G84FRSN 44-49 M8/M10 49902 50 £193.00 G84FRSN 50-55 M8/M10 49922 50 £192.53 G84FRSN 57-61 M8/M10 49944 50 £219.45 G84FRSN 63-68 M8/M10 49945 50 £240.83 G84FRSN 70-77 M8/M10 49947 25 £244.59 G84FRSN 80-83 M8/M10 49948 25 £270.08 G84FRSN 83-90 M8/M10 49979 25 £345.37 G84
89
For full product details please refer to the Main Catalogue Section
UNLINED CLAMPS - Cont. Sales unit £ Price per 100 pieces
Discount group
Item Art.-No. [pcs]
FRSN 93-99 M8/M10 50005 25 £399.02 G84FRSN 101-106 M8/M10 50006 25 £413.34 G84FRSN 108-114 M8/M10 50008 25 £437.47 G84FRSN 118-122 M8/M10 500744 25 £484.18 G84FRSN 123-128 M8/M10 50009 25 £565.08 G84FRSN 131-135 M8/M10 50010 25 £585.70 G84FRSN 140-144 M8/M10 50023 25 £593.69 G84FRSN 146-156 M8/M10 500746 25 £783.07 G84FRSN 159-165 M10/M12 500747 25 £1,162.82 G84FRSN 166-175 M10/M12 500748 20 £1,194.19 G84FRSN 176-179 M10/M12 500749 15 £1,318.47 G84FRSN 185-191 M10/M12 500750 15 £1,374.77 G84FRSN 200-206 M10/M12 500751 15 £1,420.03 G84FRSN 210-219 M10/M12 500752 15 £1,494.38 G84
HVAC CLAMPS Sales unit £ Price per 100 pieces
Discount group
Item Art.-No. [pcs]
LGS 450 24637 1 £1,966.01 G84LGS 500 24638 1 £2,114.24 G84LGS 560 24639 1 £2,218.27 G84LGS 600 24640 1 £2,484.66 G84LGS 630 24641 1 £2,933.77 G84LGS 710 24642 1 £3,240.63 G84LGS 800 24643 1 £3,758.58 G84LGS 900 24644 1 £4,636.26 G84LGS 1000 24645 1 £5,241.62 G84LGS 1120 24646 1 £6,033.51 G84LGS 1250 24647 1 £6,889.13 G84
MS CHANNEL Sales unit £ Price per 100 pieces
Discount group
Item Art.-No. [pcs]
MS27/18 - 2M Channel 79560 1 £11.31 G84MS27/18 3M 79557 1 £16.89 G84MS 27/18 30072 1 £35.42 G84MS28/30 - 2M 79561 1 £22.95 G84MS28/30/3M 79558 1 £28.50 G84MS38/40 - 2M* 79562 1 £33.67 G84MS38/40/3M* 79559 1 £49.58 G84MS 38/40 30075 1 £95.20 G84MS 40/60 14314 1 £219.80 G84FUS 41/41/S 3M Channel 77347 1 £58.59 G84FUS 41/21/S 3M Channel 77349 1 £51.14 G84
SAMONTEC - MECHANICAL & ELECTRICAL Product Price List
90 SAMONTEC - MECHANICAL & ELECTRICAL Product Price List
MS RAIL ACCESSORIES Sales unit £ Price per 100 pieces
Discount group
Item Art.-No. [pcs]
LKH N 24666 50 £330.59 G84LKH 24671 50 £240.23 G84ZKHN DUCT BRACKET* 24672 50 £348.50 G84ZKH 24674 50 £217.16 G84LRBN 77613 50 £537.50 G84LRB 24675 50 £339.82 G84E MS 27 Rubber inlay 27/18 28/30 24664 1 £214.48 G84E MS 38 Rubber inlay 38/40 40/60 24665 1 £296.38 G84AK27/183 79565 100 £39.56 G84AK 28/30* 79566 100 £44.13 G84AK38/40* 79567 50 £74.77 G84AK40/60* 48841 25 £175.71 G84ALK S 28/30* 63581 5 £5,140.68 G84ALK S 28/30-600* 63594 5 £6,407.14 G84SFQ27* 79409 15 £822.31 G84SFL27* 79585 15 £805.78 G84SF Q 38 SATTELFLANSCH 79410 15 £1,888.01 G84SFL38* 79586 10 £2,043.60 G84MW27-45* 79656 25 £623.79 G84MW27-90 79655 25 £475.15 G84MW38-45 BRACKET* 79658 10 £1,187.87 G84MW38-90* 79657 20 £944.72 G84MW L2 38-90° MONTAGEWINKEL 63599 20 £614.18 G84MW L3 38-90* 63597 20 £701.56 G84MW S2 38-90° SCHIENENINNENWINKEL 63610 20 £1,347.43 G84SB 38/40 SCHIENENBUEGEL 20926 25 £574.49 G84SV27* 79660 10 £1,393.46 G84SV38* 79661 10 £1,732.59 G84HG27M6T 49480 200 £41.57 G84HG27M8 79595 100 £41.57 G84HG27M10 79596 100 £41.57 G84HG 38 M6 77667 100 £89.16 G84HG 38 M8 24687 100 £94.13 G84HG38 M10 24688 100 £94.13 G84SM38M8* 79600 50 £85.26 G84SM38M10* 79601 50 £85.26 G84CLIX MK M6* 63692 100 £433.50 G84CLIX MK M8* 63693 100 £439.83 G84CLIX MK M10* 63694 100 £446.18 G84FHS CLIX-N M8X90* 79605 50 £346.17 G84FHS CLIX-N M8X140* 79606 50 £421.95 G84FHS CLIX-N M8X190* 79607 50 £525.77 G84FHS38 CLIX 8X30* 20914 50 £354.39 G84FHS38 CLIX 8X40T* 20915 50 £357.77 G84FHS38 CLIX 8X60* 20916 50 £417.92 G84FHS38 CLIX 10X30* 20917 50 £347.77 G84FHS38 CLIX 10X40 20918 50 £384.92 G84FHS38 CLIX 10X60* 20919 50 £408.43 G84FHS CLIX S 12 x 30 20969 50 £498.23 G84FHS CLIX 8X20 79620 100 £101.33 G84FHS CLIX 8X30 79621 100 £109.45 G84FHS CLIX 8X40* 79622 100 £113.39 G84FHS CLIX 8X60* 79624 100 £120.26 G84FHS CLIX 8X80* 79626 50 £137.87 G84FHS CLIX 8X100* 79628 50 £144.39 G84
91
For full product details please refer to the Main Catalogue Section
MS RAIL ACCESSORIES Sales unit £ Price per 100 pieces
Discount group
Item Art.-No. [pcs]
FHS CLIX 10X30 79635 100 £127.23 G84FHS CLIX 10X40 79636 100 £132.90 G84FHS CLIX 10X60* 79637 100 £143.85 G84HS38M 8X30 T HEAD 79610 50 £160.29 G84HS38M 8X40 T HEAD* 79611 50 £163.85 G84HS38M 8X60* 79612 50 £170.75 G84HS 38 M10X25 HAMMERKOPFSCHRAUBE 63956 50 £153.75 G84HS38M10X30* 79615 50 £177.09 G84HS38M10X40* 79616 50 £177.73 G84HS38M10X60* 79617 50 £190.85 G84HK27 79650 50 £99.25 G84HK38* 79651 50 £148.89 G84WK200/200* 79570 5 £2,449.02 G84WK207/160* 79571 6 £2,041.73 G84TSF L 38/40 TELESKOPFLANSCH 63611 15 £2,063.66 G84TSF Q 38/40* 63621 15 £2,063.66 G84UW S BRACKET 49479 10 £1,945.67 G84GLL 3/4" GLEITELEMENT SCHWER MIT 3/4" 64038 5 £5,645.97 G84GL 3/4" GLEITELEMENT SCHWER 3/4" 64041 5 £4,660.48 G84
SLIDING / LEVEL ACCESSORIES Sales unit £ Price per 100 pieces
Discount group
Item Art.-No. [pcs]
SBSM8* 79685 8 £2,634.19 G84SBSM10 79686 8 £2,729.57 G84SBM8* 79680 25 £936.74 G84SBM10* 79681 25 £1,576.66 G84PDHM8 79676 50 £551.61 G84PDHM10 79677 50 £690.57 G84PDHM12* 64037 25 £817.23 G84PDHK M8 68267 50 £363.37 G84PDHKM10 68269 50 £528.97 G84PVM6* 20947 100 £241.97 G84PVM8* 79678 100 £265.27 G84
BASE PLATES | BEAM CLAMPS Sales unit £ Price per 100 pieces
Discount group
Item Art.-No. [pcs]
GPL M8 79665 25 £273.67 G84GPL M10 79666 25 £311.22 G84GPL 1/2" BASE PLATE* 79667 25 £409.86 G84GPS M10* 79671 25 £412.71 G84GPS 1/2" 79672 25 £387.73 G84GPS 3/4" 20968 25 £657.58 G84GPR GRUNDPLATTE RUND 37289 25 £494.03 G84TKL L M8 Beam clamp 64055 50 £3.64 G84TKL M8 " 79787 50 £4.99 G84TKL9* 42968 50 £3.48 G84TKLM10 42972 50 £4.94 G84TKL D11 42973 50 £4.99 G84TKL M12 20949 50 £8.22 G84
SAMONTEC - MECHANICAL & ELECTRICAL Product Price List
92
BANDING Sales unit £ Price per 100 pieces
Discount group
Item Art.-No. [pcs]
LBV12 79549 10 £12.88 G84LBV17 79550 10 £15.13 G84LBV26 79551 8 £25.69 G84LBK12 79553 10 £27.50 G84LBK19 79554 8 £29.24 G84LBK27* 79555 8 £35.07 G84
ACCESSORIES Sales unit £ Price per 100 pieces
Discount group
Item Art.-No. [pcs]
DPP65* 79702 50 £161.10 G84DPP85* 79703 50 £176.78 G84DPP105* 79704 50 £260.51 G84DPFM8X60-105* 24648 50 £272.85 G84
STUD SCREWS Sales unit £ Price per 100 pieces
Discount group
Item Art.-No. [pcs]
STS6X80 77714 100 £23.42 G84STST8X50 79780 100 £24.73 G84STST8X60 79781 100 £26.28 G84STST8X80 79782 100 £29.05 G84STST8X100 STUD 79783 100 £32.33 G84STST8X120 STUD 79784 100 £38.59 G84STST8X140 79785 50 £53.72 G84STST8X180 STUD* 79786 50 £94.83 G84STST10X60 77689 100 £26.78 G84STST10X80 77707 100 £35.71 G84STST10X100 77708 100 £42.51 G84STST10X120 77709 100 £50.14 G84STST10X140 77711 50 £64.61 G84STST10X180 77712 50 £93.48 G84
HED 79831 1 £52.55 G84
CUT STUDS Sales unit £ Price per 100 pieces
Discount group
Item Art.-No. [pcs]
GS8/25 SAMONTEC 79750 100 £10.32 G84GS8/40 79751 100 £14.96 G84GS8/50 SAMONTEC* 79752 100 £17.20 G84GS8/60 79753 100 £19.25 G84GS8/70 SAMONTEC* 79754 100 £21.48 G84GS8/80 79755 100 £23.76 G84GS8/90* 79756 100 £26.02 G84GS8/100 79757 100 £34.56 G84GS8/150 79758 50 £46.86 G84GS8/200 79759 50 £60.11 G84GS10/25 79765 100 £13.71 G84GS10/40 SAMONTEC 79766 100 £19.99 G84GS10/60 SAMONTEC 79767 100 £26.06 G84GS10/80 SAMONTEC 79768 100 £39.22 G84GS10/100 SAMONTEC 79769 100 £43.74 G84
GS10/120 SAMONTEC 79770 50 £53.10 G84
GS10/150 SAMONTEC 79771 50 £68.49 G84
GS10/200 SAMONTEC 79772 50 £89.80 G84
SAMONTEC - MECHANICAL & ELECTRICAL Product Price List
93
For full product details please refer to the Main Catalogue Section
ADAPTERS | REDUCERS Sales unit £ Price per 100 pieces
Discount group
Item Art.-No. [pcs]
GDP M8X25 GEW.-DOPPELNIPPEL 79737 £29.67 G84VM M6 14319 100 £27.09 G84VMM8 HEX.CONNECTOR 79690 100 £29.70 G84VMM10 79691 100 £50.89 G84VM M12* 20971 100 £80.70 G84RDM6/M8* 79694 100 £123.90 G84RDM8/M6* 20936 100 £130.47 G84RD M10/M8 79692 50 £131.21 G84RDM12/M10 79693 100 £161.97 G84RD 1/2" M10 REDUZIERSTUECK 79695 10 £469.20 G84RDM M10/M8 79413 50 £146.09 G84RDM M12/M10* 79414 100 £146.09 G84GRD 1/2" M10 77609 100 £423.64 G84GRD 1/2" M12 77608 100 £423.64 G84GRD 3/4" M10 77607 100 £495.04 G84
GRD 3/4" M12 77606 100 £495.04 G84
U BOLTS Sales unit £ Price per 100 pieces
Discount group
Item Art.-No. [pcs]
ETR 8-13 24415 10 £31.85 G84ETR 12-17 24416 10 £32.48 G84ETR15-21 24417 10 £33.92 G84ETR20-27* 24418 10 £52.98 G84ETR26-34* 24419 10 £60.23 G84ETR33-42 24420 10 £67.62 G84ETR 40-49* 24421 10 £70.53 G84ETR50-60 24422 10 £87.14 G84ETR60-70* 24423 10 £130.87 G84ETR66-76* 24424 10 £152.17 G84ETR70-82* 24425 10 £163.37 G84ETR80-90* 24426 10 £169.74 G84ETR90-102* 24427 5 £330.96 G84ETR100-108* 24428 5 £317.95 G84ETR 102X114 24429 5 £324.95 G84
ETR 121-127 24430 5 £367.06 G84
ETR 126-133 24431 5 £384.11 G84
ETR131-140* 24432 5 £551.33 G84
ETR 143-153 24433 5 £677.69 G84
ETR150-159* 24434 5 £680.63 G84
ETR168* 24435 5 £700.34 G84
ETR 193,7 24436 5 £691.10 G84
ETR219* 24437 5 £784.01 G84
SAMONTEC - MECHANICAL & ELECTRICAL Product Price List
94
1. GeneralEach order or acceptance of a quotation for goods offered by fischer Fixings (UK) Limited (“fischer”) (“Goods”) submitted by a customer (“Customer”) shall be deemed to be an offer by the Customer to buy Goods subject to these conditions. Each offer and its acceptance by fischer shall form a contract (“Contract”). These conditions shall apply to and be deemed to be incorporated into each Contract and no other terms will apply to the supply of Goods by fischer unless agreed in writing by an authorised signatory of fischer. The acceptance of delivery of the Goods by the Customer shall be deemed to constitute acceptance of these conditions to the exclusion of all other terms and conditionsNo order placed by the Customer shall be deemed to be accepted by fischer until a written acknowledgment of order is issued by fischer or (if earlier) fischer delivers the Goods to the Customer. Whilst fischer takes every precaution in the preparation of its catalogues, technical circulars, illustrations, price lists, weight and measurement estimates and its other literature, these documents are for the Customer’s general guidance only and the particulars contained therein shall not constitute representations by fischer and the Customer acknowledges that it has not relied on any statement, promise or representation made or given on behalf of the Company which is not set out as part of the Contract.Failure or delay by fischer in enforcing or partially enforcing any provision of the Contract shall not be construed as a waiver of any rights under the Contract. If any provision of the Contract is found by any court, tribunal or administrative body of competent jurisdiction to be wholly or partly illegal, invalid, void, voidable, unenforceable or unreasonable it shall to the extent of such illegality, invalidity, voidness, voidability, unenforceability or unreasonableness be deemed severable and the remaining provisions of the Contract and the remainder of such provision shall continue in full force and effect.The Contract shall be governed by and construed in accordance with English law and all disputes arising in connection with the Contract shall be submitted to the exclusive jurisdiction of the English courts.
2. PricesThe price for the Goods shall be as set out in the fischer price list that is current at the date of despatch of the Goods. Unless otherwise stated all prices quoted are net ex works exclusive of VAT and the cost of packaging, insurance, freight, delivery and installation. Orders over the value of £100 (or such amounts as fischer shall from time to time determine) will be dispatched carriage paid. fischer may issue an invoice at any time after the relevant Goods are ready for despatch. The Customer shall not be entitled to make any deduction from the price of the Goods in respect of any set-off, counterclaim or otherwise. fischer reserves the right at any time prior to delivery of the Goods to adjust the price to take account of any price increase to passed on by fischer’s suppliers in the cost of raw materials, labour, services or any currency fluctuations affecting the cost of imported materials. The same right of increase is reserved in respect of fischer’s real costs increasing by 5% or more.
3. Payment TermsIf fischer has not granted credit to the Customer, payment terms are cash with order. If credit has been granted, the Customer shall, unless otherwise agreed in writing by fischer, pay the price of the Goods on the last working day of the month following the month in which the invoice in respect of such Goods was issued.Time for payment of the purchase price shall be of the essence and without prejudice to any other right which fischer may have, fischer shall be entitled to charge interest on overdue amounts due under any Contract from the due date for payment thereof at the rate of two per cent (2%) per month above the base rate for the time being of Lloyds TSB Bank plc on a daily basis until payment is made.fischer reserves the right to demand payment on delivery, to suspend further deliveries, to demand money on account, to demand security for payment and to cancel any allowance of further credit in the event of any payments under the Contract (or any other Contract with the Customer) not being made when due, or fischer in its sole discretion at any time considers that the financial condition of the Customer has ceased to justify any such credit terms being permitted.
4. Delivery, Returns and Cancellations Unless otherwise agreed in writing by fischer, delivery of the Goods shall take place at fischer’s place of business. Any dates specified by fischer for delivery of the Goods are intended to be an estimate only and time for delivery shall not be made of the essence by notice. If no dates are specified, delivery shall be within a reasonable time. fischer shall not be liable for any losses, consequential or otherwise, or for costs (including legal costs), expenses, liabilities, injuries, loss of profits, business or economic loss, depletion of goodwill, damages, claims, demands, proceedings, judgments or otherwise arising from any late delivery.fischer reserves the right to make delivery by instalments.fischer reserves the right to alter design specifications or otherwise of the Goods but only to the extent that the usual purpose or contractual uses for the Goods are not in any way adversely affected or impaired.fischer may impose a £10 administration charge in respect of Customer requests for written proof of delivery.The quantity and description of the Goods shall be as set out in fischer’s quotation or acknowledgment of order. Unless otherwise stated the Goods are offered for sale only in multiples of box quantity available at the time of order. All such quantities are subject to change. The Customer must obtain an authorisation number issued by fischer prior to returning any Goods. All Goods to be returned must be consigned carriage paid to fischer’s warehouse at Whitely Road, Hithercroft Industrial Estate, Wallingford. All returns will be subject to a handling charge amounting 20% of the price paid for the Goods or £40, whichever is greater. Goods can only be accepted for return if upon examination they are found to be in the same condition in all respects as upon delivery. No cancellation of orders by the Customer is permitted except where expressly agreed by fischer in writing.
5. Risk and TitleRisk of loss or damage to the Goods shall pass to Customer on delivery the Goods.Ownership of the Goods shall not pass to the Customer until fischer has received in full (in cash or cleared funds) all sums due in respect of the Goods and all other sums which are or which become due to fischer from the Customer under a Contract or any other contract. Until ownership of the Goods has passed to the Customer, the Customer shall hold the Goods on fiduciary basis as fischer’s bailee and store the Goods (at no cost to fischer) separately from all other goods of the Customer or any third party such way that they remain readily identifiable as Fischer’s property.The Customer may resell the Goods before ownership has passed to it only if the sale is effected in the ordinary course of the Customer’s business at full market value. Any such sale shall be a sale of fischer’s property on the Customer’s behalf and the Customer shall deal as principal when making such sale.If the Customer (i) is late in paying any sum to fischer, or (ii) becomes subject to any insolvency proceedings or proceedings having a similar effect or (iii) charges or attempts to charge the Goods, then fischer shall be entitled to the immediate return of all Goods where the ownership has not passed to the Customer and Customer’s right to possession shall terminate accordingly. The Customer grants fischer, its agents and employees an irrevocable licence at any time to enter any premises where the Goods are or may be stored in order to inspect them, or, where the Customer’s right to possession has terminated, to recover them.
fischer shall be entitled to recover payment for the Goods notwithstanding that ownership of any of the Goods has not passed from fischer to the Customer.
TERMS & CONDITIONS
95
For full product details please refer to the Main Catalogue Section
6. Warranty fischer warrants that if any part of the Goods is defective, it will at its option replace such part of the Goods or refund the purchase price. This warranty is subject to a claim being made to fischer within 12 months from the original date of despatch or the period identified as the shelf-life of the Goods on the packaging, whichever is shorter. These warranties shall not apply to any defect which arises from improper use, failure to follow the product instructions, chemical electrochemical or electrical factors insofar as they are not caused by fischer, fair wear and tear or any repair or modification made without fischer’s consent.The Customer must return (in accordance with condition 4) or dispose of the defective Goods, or make them available for collection by fischer in accordance with fischer’s instructions. The remedies set out above shall be fischer’s sole liability and the Customer’s sole remedy for any breach of warranty and in respect of the supply or non-supply of Goods. Save as expressly provided in these terms, all implied warranties, terms and conditions (whether statutory or otherwise) concerning the supply or non-supply of the Goods are excluded to the fullest extent permitted by law. The Customer acknowledges that it is responsible for ensuring that the Goods it orders are fit for the purposes for which it intends to use them.
7. Inspection, Shortages and Non –delivery The Customer must inspect the Goods as soon as is reasonably possible after delivery and shall, within 10 days of the date of delivery or, in the case of non-delivery the due date for delivery, give notice to fischer in detail of:(a) Any defect in the Goods that is apparent on reasonable examination. In this case fischer shall, at its option, replace the Goods or refund the purchase price;(b) Any shortfall in Goods delivered. In this case fischer shall, at its option, deliver the undelivered Goods or refund the price of the undelivered Goods; (c) Any delivery of Goods not in accordance with the order. In this case fischer shall, at its option, replace the Goods or refund the purchase price; (d) Any non-delivery of the Goods. In this case fischer shall deliver the undelivered Goods or refund the price of the undelivered Goods. If the Customer fails to give any such notice, the Goods shall be conclusively presumed to be, in all respects, in accordance with the order and free from apparent defects, and the Customer shall be deemed to have accepted the Goods accordingly. The remedies set out above are the Customer's exclusive remedies for non-delivery or short delivery of Goods, or for apparent defects in the Goods or delivery of Goods not in accordance with the order. fischer shall not be liable for any losses, consequential or otherwise, or for costs (including legal costs), expenses, liabilities, injuries, loss of profits, business or economic loss, depletion of goodwill, damages, claims, demands, proceedings, judgments or otherwise arising from these circumstances.
8. Limitations of LiabilityNothing in these terms shall exclude fischer’s liability for fraud or fraudulent misrepresentation or death or personal injury caused by fischer’s negligence. Nothing in these terms shall affect the statutory rights of consumers. fischer shall not be liable to the Customer for any loss of profit, loss of business, or depletion of goodwill in each case whether direct, indirect or consequential, or any claims for consequential compensation whatsoever (howsoever caused) which arise out of or in connection with any breach of these conditions (including any deliberate breach of these conditions by a party, or its employees, agents or subcontractors); any use made or resale by the Customer of any of the Goods, or of any product incorporating any of the Goods; and any representation, statement or tortious act or omission including negligence arising under or in connection with the Contract.If notwithstanding any of the provisions of these terms, any liability attaches to fischer, fischer’s total liability in contract, tort (including negligence or breach of statutory duty), misrepresentation, restitution or otherwise, arising in connection with the performance or contemplated performance of the Contract shall be limited in aggregate to £100,000 or the total value of the order, whichever is greater.
9. Force Majeurefischer reserves the right to defer the date of delivery or to cancel the Contract or reduce the volume of the Goods ordered by the Customer (without liability to the Customer) if it is prevented from or delayed in the carrying on of its business due to circumstances beyond the reasonable control of fischer including, without limitation, acts of God, governmental actions, war or national emergency, acts of terrorism, protests, riot, civil commotion, fire, explosion, flood, epidemic, lock-outs, strikes or other labour disputes (whether or not relating to either party's workforce), or restraints or delays affecting carriers or inability or delay in obtaining supplies of adequate or suitable materials, provided that, if the event in question continues for a continuous period in excess of 90 days, the Customer shall be entitled to give notice in writing to fischer to terminate the Contract.
The information in this catalogue is intended for general guidance only and is given without engagement. Additional information and advice on specific applications is available from our Technical Support Team. For this however, we require a precise description of your particular application.All the data in this price list concerning work with our fixings must be adapted to suit local conditions and the type of materials in use.If no detailed performance specifications are given for certain articles and types, please contact our Technical Service Department for advice.
fischer Fixings UK Ltd.Whitely Road, Wallingford, Oxon, OX10 9AT.
We cannot be responsible for any errors, and we reserve the right to make technical and range modifications without notice.No liability is accepted for printing errors and omissions.
TERMS & CONDITIONS
www.fischer.co.uk
Your Dealer:
02
/20
14
(V1
) · M
ista
kes,
tec
hn
ical
an
d pr
oduc
t m
ix c
han
ges
are
rese
rved
. Res
pon
sibi
lity
for
prin
tin
g er
rors
an
d de
fici
enci
es a
re e
xclu
ded.
Contacts
fischer fixings UK Ltd.Whitely RoadWallingfordOXON. OX10 9AT
Customer ServicesTel: 01491 827 900Fax: 01491 827 953E-mail: [email protected] Finance / Accounts:Tel: 01491 827 930Fax: 01491 827 952
Technical Service If you need any assistance please contact your local fischer representative. For more specialised application problems please contact our Technical Services Team.
Phone: 01491 827 920 . Fax 01491 827 950E-mail: [email protected]
We also offer training seminars suited to your individual needs and requirements. Please get in contact to find out more