PRICE LIST2019

2 All specified prices are EXW, without VAT.

YTONG ADVANTAGES

GUARANTEED SOUND INSULATIONThe YTONG MASSIV blocks with increased sound insulation guar-antee perfect silence and quietness at home.

HIGH ENERGY EFFICIENCYThe YTONG blocks have the best heat insulation capacity among the commonly used masonry materials in Bulgaria. They ensure more than 10% lower heating bills during the winter and natural coolness during the summer.

HEALTHY MICROCLIMATEYTONG is a “breathe” material. Moisture is not accumulated in the walls and the air in the room remains always fresh.

FIRE SAFETYYTONG is 100% non-flammable. In case of fire it does not emit harmful substances and limits the spread of fire.

GERMAN QUALITYThe YTONG blocks are produced with guaranteed and permanent characteristics. They are subject to continuous control by inde-pendent laboratories.

FREEDOM OF FANTASYThe YTONG blocks are cut and ground extremely easily, also the most unusual ideas about shaping of the home may be imple-mented with them.

LONG LIFEYTONG is used in the construction worldwide for more than 90 years. The practice shows that it does not age and it does not change its properties over the years.

ECONOMICAL AND SAFE CONSTRUCTIONThe YTONG blocks are processed easily and allow quick build-ing of plain walls with low consumption of adhesive and small amount of finishing works. YTONG increases the safety and the earthquake resistance due to the smaller weight of the masonries.

MORE SPACE AT HOMEThe excellent heat insulation properties of YTONG blocks allow building of exterior walls with smaller thickness compared to the ceramic bricks. Thus, a house with 100 m2 area increases its living area with about 3 m2.

ECOLOGICAL MATERIALYTONG is produced from natural raw materials — lime, cement, sand and water. It creates healthy life conditions in the buildings. YTONG is fully recyclable and contributes to the preservation of the natural ecosystems.

1Price list 2019 All specified prices are EXW, without VAT. 1Price list 2017

ADDITIONAL SERVICES

TECHNICAL CONSULTATIONSOur technical department is available for free consultations both on phone and in-situ at each stage of the construction.

Call us and engage our instructors for free training or demonstration regarding the application of YTONG and Multipor products.

TRAININGS AND DEMONSTRATIONS

In our CD you will find special information about our products, including architectural details, calcu-lation software for the thermal conductivity of the wall structures and films about work with YTONG and Multipor.

CD INSTRUCTIONS

DELIVERY OF YTONG EXPRESSCall our regional sales managers to receive the desired products in the shortest time.

CALCULATORBy YTONG calculator you can calculate the materials for your masonries, compare different variants and their advantages, and choose a solution suitable for you. By Multipor calculator you can easily determine what insulation thickness is necessary to reduce your heating bill.

“Your home” construction program offers not only a ready architectural design but a complete solution for fast and qualitative building of a family house with clear time limits and prices.

“YOUR HOME” CONSTRUCTION PROGRAM

Special tools for work with YTONG and Multipor are invented. Their usage makes the workers job easier, increase the labour productivity and guarantees optimal consumption of adhesive.

TOOLS

Increase the labour productivity and the masonry quality by renting a band saw from us. The minimum time limit is 1 week, and for a period of more than a month the transportation to and from your site is free of charge.

BAND SAW

2 All specified prices are EXW, without VAT.

YTONG KLASSIK (B2,5 D440) CHARACTERISTICS PACKAGING PRICE

Dimensions(thickness, length,

height)

Shapingof the front

sidesDensity

Compressive strength

Coefficient ofthermal con-ductivity (λ)

Quantity VolumeArea of

the masonry in 1 pallet

Transporta-tion

weight*

Priceper piece

mm kg/m3 MPa W/(m•K) pcs./pallet m3/pallet m2 kg/pallet BGN

75х600х250 smooth 440±20 2.5 0.12102/12** 1.33 15.3/1.8 890 1.61

50х600х250 156/12** 1.35 23.4/1.8 905 1.07

YTONG THERMO (B2, D350) CHARACTERISTICS PACKAGING PRICE

Dimensions(thickness, length,

height)

Shapingof the front

sidesDensity

Com-pressive strength

Coefficient ofthermal conductiv-

ity (λ)Quantity Volume

Area ofthe masonry

in 1 pallet

Transporta-tion

weight*

Priceof

1 m3

Priceof

1 m3

mm kg/m3 MPa W/(m•K) pcs./pallet m3/pallet m2 kg/pallet BGN BGN

350х600х250 smooth,groove

andtongue

350±20 2 0.09

24 1.26 3.6 680 49.00 140.00 300х600х250 30 1.35 4.5 730 42.00 140.00 250х600х250 36 1.35 5.4 730 35.00 140.00 200х600х250 42 1.26 6.3 680 28.00 140.00

Blocks for building ofenergy efficient exterior walls

Blocks with generalpurpose

YTONG KLASSIK (B2,5 D440) CHARACTERISTICS PACKAGING PRICE

Dimensions(thickness, length,

height)

Shapingof the front

sidesDensity

Com-pressive strength

Coefficient ofthermal conductiv-

ity (λ)Quantity Volume

Area ofthe masonry

in 1 pallet

Transporta-tion

weight*

Priceof

1 m2

Priceof

1 m3

mm kg/m3 MPa W/(m•K) pcs./pallet m3/pallet m2 kg/pallet BGN BGN

300х600х250

smooth,groove

andtongue(N+F)

440±20 2.5 0.12

30 1.35 4.5 905 38.70 129.00 250х600х250 36 1.35 5.4 905 32.25 129.00 200х600х250 42 1.26 6.3 845 25.80 129.00 175х600х250 48 1.26 7.2 845 23.28 133.00 150х600х250 60 1.35 9.0 905 19.95 133.00 125х600х250 72 1.35 10.8 905 16.63 133.00 100х600х250 90 1.35 13.5 905 13.30 133.00

TECHNICAL CHARACTERISTICS AND PRICES

! Always 6.67 blocks are necessary for the construction of 1 m2 wall, notwithstanding the thickness.

! Always 6.67 blocks are necessary for the construction of 1 m2 wall, notwithstanding the thickness.

3Price list 2019 All specified prices are EXW, without VAT.

Blocks for building ofinternal wallswith improved sound insulation or for building of bearing walls

* The wooden grid, on which the blocks are placed, is included in the transportation weight.**The pallet includes also 12 blocks with thickness 100 mm, arranged as first and last row.

The minimum amount to order is 1 truck with load of 24 t.The reference prices for transportation from the factories of XELLA Bulgaria Ltd. to different settlements can be found on the last page.XELLA Bulgaria Ltd. sells the produced products via a distribution network. XELLA Bulgaria Ltd. reserves the right to modify the information in this brochure at any time.

YTONG MASSIV (B5, D700) CHARACTERISTICS PACKAGING PRICE

Dimensions(thickness, length,

height)

Shaping of the front

sidesDensity

Com-pressive strength

Coefficient ofthermal conductiv-

ity (λ)Quantity Volume

Area ofthe masonry

in 1 pallet

Transportation weight*

Priceof

1 m3

Priceof

1 pallet

mm kg/m3 MPa W/(m•K) pcs./pallet m3/pallet m2 kg/pallet BGN BGN

250х600х250

smooth 700±50 5 0.18

36 1.35 5.4 1260 35.25 141.00 200х600х250 42 1.26 6.3 1180 28.20 141.00 175х600х250 48 1.26 7.2 1180 25.55 146.00 150х600х250 60 1.35 9.0 1260 21.90 146.00 125х600х250 72 1.35 10.8 1260 18.25 146.00 100х600х250 90 1.35 13.5 1260 14.60 146.00

! Always 6.67 blocks are necessary for the construction of 1 m2 wall, notwithstanding the thickness.

4 All specified prices are EXW, without VAT.

NON-LOAD BEARING LINTELS for bridging of openings for doors and windows CHARACTERISTICS PACKAGING PRICE

Dimensions(thickness, length,

height)

Shaping of the front

sidesDensity

Com-pressive strength

Coefficient ofthermal conductiv-

ity (λ)

Dimensions ofthe cross section Quantity

Transporta-tion

weight*

Priceof

1 pieced h

mm kg/m3 MPa W/(m•K) mm mm pcs./pallet kg/pallet BGN

100х1000х250

100 250

36 660 11.21 100х1200х250 36 805 13.45 100х1500х250 36 985 16.82 100х1800х250 36 1185 20.18 100х2000х250 36 1310 22.42 125х1000х250

smooth 440±20 2.5 0.15 125 250

27 595 11.93 125х1200х250 27 705 14.32 125х1500х250 27 880 17.90 125х1800х250 27 1055 21.47 125х2000х250 27 1175 23.86 150х1000х250

150 250

24 615 12.76 150х1200х250 24 720 15.31 150х1500х250 24 900 19.14 150х1800х250 24 1080 22.97 150х2000х250 24 1200 25.52

CHANNEL SHAPED BLOCKS for pouring without formwork of reinforced concrete belts CHARACTERISTICS PACKAGING PRICE

Dimensions(thickness, length,

height)

Shaping of the front

sidesDensity

Com-pressive strength

Coefficient ofthermal conductiv-

ity (λ)

Dimensions of the crosssection Quantity Transporta-

tion weight*Price

of1 pieced h

mm kg/m3 MPa W/(m•K) mm mm pcs./pallet kg/pallet BGN

350х600х250

smooth 440±20 2.5 0.12

350 250 20 365 9.16 300х600х250 300 250 20 335 8.19 250х600х250 250 250 30 450 7.23 200х600х250 200 250 40 535 6.27

ADDITIONAL PRODUCTS

The non-load bearing lintels and the channel shaped blocks are produced upon request in advance.

5Price list 2019 All specified prices are EXW, without VAT.

* The wooden grid, on which the blocks are placed, is included in the transportation weight.

BLOCKS WITH OPENINGS for pouring without formwork of reinforced concrete columns and vertical belts CHARACTERISTICS PACKAGING PRICE

Dimensions(thickness, length,

height)

Shaping of the front

sidesDensity Com-

pressive strength

Coefficient ofthermal conductiv-

ity (λ)

Diameterof

opening

Thicknessof the wall

of the opening

Quantity Transporta-tion

weight*

Priceof

1 piece

mm kg/m3 MPa W/(m•K) mm mm pcs./pallet kg/pallet BGN

350х600х250

smooth 350±20 2 0.09

250 50 24 530 8.82

300х600х250 200 50 30 600 7.56

250х600х250 160 45 36 625 6.30

YTONG adhesive masonry mortar, in bags of 20 kg each

Thickness ofplacement

Consumption ratePrice of

1 kgPrice of 1 bag20 kg

Blocks with smooth face Blocks with groove and tongue

mm kg/m3 kg/m3 BGN/kg BGN/bag

1 ÷ 3 15 11 0.27 5.40

Comfortable and cozyenergy-efficient homefor YOURFAMILY!

www.gotovdom.bg

6 All specified prices are EXW, without VAT.

TOOLS FOR WORK WITH YTONG

Agitator for adhesive mortar Three sidedright angle

Notched blade Board with abrasive paper

Groove digger a set Flat drill forelectric boxes

Rubber hammer Planer for YTONG

Drill with long shank

mm bgn 75 – 17.42 100 – 17.83 125 – 18.24 150 – 18.92 175 – 20.31 200 – 21.08 250 – 22.63 300 – 23.87

20х300 mm – 13.61 bgn

30х300 mm – 13.93 bgn

50х300 mm – 15.17 bgn

70 mm – 15.08 bgn

82 mm – 15.53 bgn

18.63bgn/pcs.

27.12bgn/pcs.

15.07 bgn/pcs.

22.47bgn/pcs.

26.05bgn/pcs.

20.60 bgn/pcs.

Bank saw

0,7 kg – 18.42 bgn

0,9 kg – 20.70 bgn

Saw

17 carbide teeth – 50.72

Lifting bracketsFlat anchor with screw

1.25bgn/pcs.

big – 300 bgn

small – 360 bgn

Rent for a month

7Price list 2019 All specified prices are EXW, without VAT.

9Price list 2019 8 All specified prices are EXW, without VAT. All specified prices are EXW, without VAT.

LAYERS

Standardweight

HEAT INSULATION SOUND INSULATION1. Internal

lime-cement or gypsum plaster

2. Wall ofYTONG MASSIV B5,

D700

3. Internallime-cement or gypsum plaster

— — Totalthickness of

the wall

Coefficient ofthermal conductivity

(calculated for λ10,dry ofYTONG MASSIV B5, D700)

Resistance ofthermal conductivity

(calculated for λ10,dry ofYTONG MASSIV B5, D700)

Weighted sound reduction indexof the insulation

(without transfer through bypass

thickness thickness thickness — — U R RW

cm cm cm — — cm kg/m2 W/(m2•K) (m2•K)/W dB1.0 15.0 1.0 — — 17.0 157 0.893 1.12 47

LAYERS

Standardweight

HEAT INSULATION SOUND INSULATION1. External

lime-cementplaster

2. Wall ofYTONG THERMO (B2,

D350)

3. Internallime-cement or gypsum plaster

— — Totalthickness of

the wall

Coefficient of thermal conductivity

(calculated for λ10,dry of YTONG THERMO B2, D350)

Resistance ofthermal conductivity

(calculated for λ10,dry of YTONG THERMO B2, D350)

Weighted sound reduction indexof the insulation

(without transfer through bypass

thickness thickness thickness — — U R RW

cm cm cm — — cm kg/m2 W/(m2•K) (m2•K)/W dB1.5 35.0 1.0 — — 37.5 183 0.244 4.09 49

ARCHITECTURAL DESIGNS

EXTERIOR WALLS

LAYERS

Standardweight

HEAT INSULATION SOUND INSULATION1. A mortar for adhesion and

plastering of Multipor

2. Heat insulation plates Multipor

3. A mortar for adhesion and plastering

of Multipor

4. Wall ofYTONG KLASSIK B2.5,

D440

5. InternalLime-cement orgypsum plaster

Totalthickness of

the wall

Coefficient ofthermal conductivity

(calculated for λ10,dry ofYTONG KLASSIK B2.5, D440)

Resistance ofthermal conductivity

(calculated for λ10,dry ofYTONG KLASSIK B2.5, D440)

Weighted sound reduction indexof the insulation

(without transfer through bypass

thickness thickness thickness thickness thickness U R RW

cm cm cm cm cm cm kg/m2 W/(m2•K) (m2•K)/W dB0.6 7.5 0.5 25.0 1.0 34.6 159 0.246 4.06 48

LAYERS

Standardweight

HEAT INSULATION SOUND INSULATION1. A mortar for adhesion and

plastering of Multipor

2. Heat insulation plates Multipor

3. A mortar for adhesion and plastering

of Multipor

4. Wall ofYTONG MASSIV B5,

D700

5. InternalLime-cement orgypsum plaster

Totalthickness of

the wall

Coefficient ofthermal conductivity

(calculated for λ10,dry ofYTONG MASSIV B5, D700)

Resistance ofthermal conductivity

(calculated for λ10,dry ofYTONG MASSIV B5, D700)

Weighted sound reduction indexof the insulation

(without transfer through bypass thickness thickness thickness thickness thickness U R RW

cm cm cm cm cm cm kg/m2 W/(m2•K) (m2•K)/W dB0.6 12.5 0.5 20.0 1.0 34.6 207 0.235 4.25 50

INTERNAL WALLS

LAYERS

Standardweight

HEAT INSULATION SOUND INSULATION1. Internal

lime-cement or gypsum plaster

2. Wall ofYTONG MASSIV B5,

D700

3. Internallime-cement or gypsum plaster

— — Totalthickness of

the wall

Coefficient ofthermal conductivity

(calculated for λ10,dry ofYTONG MASSIV B5, D700)

Resistance ofthermal conductivity

(calculated for λ10,dry ofYTONG MASSIV B5, D700)

Weighted sound reduction indexof the insulation

(without transfer through bypass thickness thickness thickness — — U R RW

cm cm cm — — cm kg/m2 W/(m2•K) (m2•K)/W dB1.0 20.0 1.0 — — 22.0 198 0.714 1.40 50

LAYERS

Standardweight

HEAT INSULATION SOUND INSULATION1. Internal

lime-cement or gypsum plaster

2. Wall ofYTONG MASSIV B5,

D700

3. Internallime-cement or gypsum plaster

— — Totalthickness of

the wall

Coefficient ofthermal conductivity

(calculated for λ10,dry ofYTONG MASSIV B5, D700)

Resistance ofthermal conductivity

(calculated for λ10,dry ofYTONG MASSIV B5, D700)

Weighted sound reduction indexof the insulation

(without transfer through bypass

thickness thickness thickness — — U R RW

cm cm cm — — cm kg/m2 W/(m2•K) (m2•K)/W dB1.0 12.5 1.0 — — 14.5 136 1.02 0.983 44

External lime-cementplasterλu = 0.87 W/(m•K)

Internal lime-cementor gypsum plasterλu = 0.70 W/(m•K)

A mortar for adhesion andplastering of Multiporλu = 0.235 W/(m•K)

Heat insulation platesMultiporλu = 0.043 W/(m•K)

External lime-cementplaster1800 kg/m3

Internal lime-cementor gypsum plaster1600 kg/m3

A mortar for adhesion andplastering of Multipor850 kg/m3

Heat insulationplates Multipor115 kg/m3

10 All specified prices are EXW, without VAT.

mineral composition

recyclable

breathing ecological heat insulating

sound absorbing firmsurface

easy for processing

non-flammable

guarantee ofquality

MULTIPOR HEAT INSULATION SYSTEM

Application

Placement of mortar on the surface of MULTIPOR plates.

2Placement and sliding of the plate.

3Mixing of MULTIPOR adhesion mortar.

1

MULTIPOR for internal insulation of ceilings

INTERNAL INSULATION OF CEILINGS

EXTERNAL INSULATION

INTERNAL INSULATION

11Price list 2019 All specified prices are EXW, without VAT.

Mortar for MULTIPOR, in bags of 20 kg

Thickness ofplacement

Consumption rate Pieces per pallet Price of1 kg

Price of 1 bag20 kg

Adhesion Plastering

mm kg/m2 kg/m2 pcs. BGN/kg BGN/bag

5 ÷ 6 3.5÷4 3.5÷4 40 1.15 23.00

Heat insulation plates MULTIPOR CHARACTERISTICS PACKAGING PRICE

Dimensions(thickness, length,

height)Density

Com-pressive strength

Coefficient ofthermal conductivity (λ) Quantity Volume

Area ofthe masonry

in 1 pallet

Smallpackages in

1 palletTransporta-

tion weight*

Price of1 m2

mm kg/m3 MPa W/(m•K) pcs./pallet m3/pallet m2 pcs. kg/pallet BGN/m2

50х600х500

100÷115 350 0.043

120 1.80 36.00 24 310 10.2575х600х500 80 1.80 24.00 16 310 14.63

100х600х500 64 1.92 19.20 16 330 19.50125х600х500 48 1.80 14.40 — 310 23.75150х600х500 40 1.80 12.00 — 310 28.50175х600х500 32 1.68 9.60 — 290 32.38200х600х500 32 1.92 9.60 — 330 37.00250х600х500 24 1.80 7.20 — 310 46.25300х600х500 18 1.62 5.40 — 280 55.50

! Always 3.33 plates are necessary for the insulation of 1 m2, notwithstanding the thickness.* The wooden grid, on which the plates are placed, is included in the transportation weight.

Multipor separating insulation band 25 m (100/5 mm)

26.50BGN/pcs.

1.45BGN/m2

Mesh for Multipor 160 g/m2, width 1.10 m

12 All specified prices are EXW, without VAT.12

TOOLS FOR WORK

7.56BGN/pcs.

24.00BGN/pcs.

Notched small plaster's hawk(notch 12, 16 and 20 mm)

Notched big plaster's hawk(notch 12, 16 and 20 mm)

Graduated bucket for mortar

Planer for Multipor

Anchor for insulationSTR U

Spiral dowel

mm BGN 115 - 0.65 135 - 0.75 155 - 0.85 175 - 0.95 195 - 1.10 215 - 1.30 235 - 1.50 255 - 1.70 275 - 1.90 295 - 2.10

mm BGN 50 - 0.45 85 - 0.60 120 - 0.70

mm BGN 125 - 1.50 150 - 1.80 200 - 2.40

Multipor adjustablejunction box 50-70 mm

Multipor extender forjunction box 35-50mm

Multipor telescopic box forwall sockets 80-170 mm

Multipor telescopic barsel. equipment 80-160 mm

3.50BGN/pcs.

10.50BGN/pcs.

22.50BGN/pcs.

23.00BGN/pcs.

9.60BGN/pcs.

14.70BGN/pcs.

Steel anchor for insulation DDS-DDT

Flat anchor with screw

1.25BGN/pcs.

Multipor drip edge profilewith visible edge – VLT-2H, 2.50 m

Multipor angular profilewith mesh – LK, 2.50 m

Multipor window profilewith mesh US8, 2.40 m

1.90BGN/m

0.90BGN/m

1.85BGN/m

47.72bgn/pcs.

Multipor saw

13Price list 2019 All specified prices are EXW, without VAT.

ADDITIONAL ELEMENTS FROM MULTIPOR

REFERENCE PRICES FOR TRANSPORTATION,organized by XELLA Bulgaria LTD

Note: The time for delivery is 3 working days from the date of receiving a request in writing.

Plates for shaping of openings (pages) - 25х600х500 mm - 250 BGN/m3

Wedge-like plates for insulation of thermal bridges (for internal insulation) - 25/75х600х500 mm - 250 BGN/m3

Produced upon request in advance.

NEW

Крайнадестинация

(Област)

Точка на натоварване(Завод на

„КСЕЛА България“ ЕООД)

Цена без ДДСза товарна

единица

Цена без ДДС за 1 m3

"YTONG THERMO (B2, D350)"

"YTONG KLASSIK (B2.5, D440)"

"YTONG MASSIV (B5, D700)"

София-град София 90 5,60 5,60 8,40София-град София 150 3,30 4,20 6,00София-област София 180 4,00 5,20 7,50Благоевград София 250 5,50 7,20 10,30Бургас Добрич 300 6,60 8,00 12,40В.Търново Добрич 380 8,30 10,10 15,70Варна Добрич 140 3,10 3,70 5,80Видин София 340 7,50 9,70 14,00Враца София 240 5,30 6,90 9,90Габрово София 340 7,50 9,70 14,00Добрич Добрич 80 1,80 2,20 3,30Кърджали София 420 9,20 12,00 17,30Кюстендил София 220 4,80 6,30 9,10Ловеч София 270 5,90 7,70 11,20Монтана София 250 5,50 7,20 10,30Пазарджик София 200 4,40 5,70 8,30Перник София 180 4,00 5,20 7,50Плевен София 260 5,70 7,50 10,70Пловдив София 250 5,50 7,20 10,30Разград Добрич 300 6,60 8,00 12,40Русе Добрич 320 7,00 8,50 13,20Силистра Добрич 200 4,40 5,30 8,30Сливен Добрич 380 8,30 10,10 15,70Смолян София 400 8,80 11,40 16,50Ст.Загора София 320 7,00 9,20 13,20Търговище Добрич 280 6,10 7,50 11,60Хасково София 320 7,00 9,20 13,20Шумен Добрич 240 5,30 6,40 9,90Ямбол Добрич 380 8,30 10,10 15,70

Sofia plantPromishlena zona

“Kremikovtsi” 1870 Sofia

Administrative addresses XELLA Bulgaria EOOD:

Dobrich Plantbul; “3 Mart” №60,

Zapadna Promishlena zona 9300 Dobrich

For any questions about the transport services:

+359 58 655 922 orders.dobrich@xella.com

+359 2 819 33 43 orders.sofia@xella.com

Yton

g an

d M

ultip

or a

re tr

adem

arks

of X

ella

Gro

up

XELLA Bulgaria EOOD

Regional Sales Managers

West Bulgaria eng. Alexandar Topalov +359 88/ 609 93 52 eng. Yancho Lutskanov +359 88/ 828 42 34

Central North Bulgaria eng. Venelin Vassilev +359 88/ 827 97 11

Sentral South Bulgaria Vasil Kokudev +359 88/ 828 67 53

North-East Bulgaria eng. Deyan Stefanov +359 88/ 588 80 44

South-East Bulgaria Petar Draganov +359 88/ 720 23 05

Key account manager MultiporSvetoslav Vasilev +359 88/ 828 31 95

Sales:

Sofia: +359 2 819 33 43 +359 88/ 828 26 11

Dobrich: +359 58 65 59 22 +359 88/ 750 75 65 fax: +359 58 65 59 00

For products YTONG +359 88/ 828 73 69

For products Multipor +359 88/ 828 46 61

Internet websites:www.ytong.bgwww.multipor.bg

Kardzhali

Smolyan

PlovdivHaskovoBlagoevgrad

Stara ZagoraPazardzhikKyustendilPernik

Sofia

Vidin

Montana

Vratsa

Pleven

LovechGabrovo

Yambol

Sliven

Burgas

Varna

DobrichShumen

Велико ТърновоTargovishte

Razgrad

PuseSilistra

Sofia 1870Kremikovtsi Industrial Zone

FACTORY SOFIA

Dobrich 930060, 3-ti mart Blvd.

FACTORY DOBRICH

Изд

ание

: Фев

руар

и 20

18

Technical consultations: