Price List - Astore plastic pipe work systems · ABS pipe, fittings and valves. Pipework and...

THERMOPLASTIC PIPEWORK SYSTEMS

Price List

AQUACULTURE FOOD & BEVERAGE IRRIGATION POOLS & SPAS WATER TREATMENT

J40930 Astore_Pricelist_MAY 2016.qxp_39154 29/07/2016 09:13 Page 1


3

GENE

RAL I

NFOR

MATIO

N

www.astore.co.uk

>VALVESComplete range of manual and actuated ball and butterfly valves

• Ball valves

• Butterfly valves

• Check valves/Non Return valves

Available in ABS and PVC-UAvailable with Electric or Pneumatic actuation

Manufacturing cost effective

thermoplastic pressure pipework

since 1970.

Complete range of PVC-U and

ABS pipe, fittings and valves.

Pipework and fittings are UK Water

Regulations Advisory Scheme

(WRAS) approved. PVC-U premium

pipe is Approved for use within

public water supplies and by the

secretary of state. PVC-U Premium

pipe is listed in the "List of approved

products" published by the DWI.

Astore production systems are

compliant with EN ISO 9002.

Furthermore, Astore offer a full

range of clamp saddles and

compression fittings.

Astore products are available via a

network of UK wide stockists.

>ABS and PVC-UPipework Systems

>COMPRESSION FITTINGS• Wide range of fittings available

• Polypropylene material

• Fittings for PE metric pipelines

Size range16mm to 110mm

Pressure ratingPN16

>CLAMP SADDLES• Made from tough polypropylene material

• Mechanical saddles with single and double branch

• Stainless steel reinforcing ring

Size range 20mm to 315mm

Pressure ratingUp to 10 bar

ABS Typical applicationsWater treatment, Waste water,Potable water, Process water, Chilled water, Agriculture,Horticulture & Food and Beverageproduction

Imperial size range1/2" to 8"

Temperature -40˚C to 60˚C

Pressure ratingUp to Class E

PVC-U Typical applicationsWater treatment, Waste water,Agriculture, Horticulture, Swimming pools, Irrigation,Chemical processing

Imperial size range 1/2" to 12"

Metric size range 16mm to 315mm

Temperature 0˚C to 60˚C

Pressure ratingUp to Class E


4 www.astore.co.uk

>GENERAL INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

>PVC-U & ABS IMPERIAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

Pipes - PVC-U Premium & Optima . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

Pipes - ABS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

Fittings - Plain . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-9

Fittings - Plain/Threaded . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

Fittings - Threaded . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11-12

Flanges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13-14

Pipe Brackets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15

Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15

>PVC-U METRIC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16

Pipes - PVC-U Premium & Optima . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17

Fittings - Plain . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18-20

Fittings - Plain/Threaded . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21-22

Fittings - Threaded . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23-24

Flanges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25

Pipe Brackets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26

Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26

>VALVES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27

Valves - Industrial . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27-28

Valves - Economy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28

Valves - Non Return . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29

Valves - Actuated . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30-31

>CLAMP SADDLES & COMPRESSION FITTINGS . . . . . . . . . . . . . .32

Clamp Saddles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33-34

Compression Fittings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35-36

>TERMS AND CONDITIONS OF SALE . . . . . . . . . . . . . . . . . . . . . . .39

>INDEX


5

impe

rial

PVC-

U &

ABS

www.astore.co.uk

StandardsAstore products are manufactured generally in accordance with the following standards:PVC-U Pipe - BS EN 1452 ABS Pipe - BS 5391 part 1PVC-U Fittings - BS 4346 part 1 ABS Fittings - BS 5392 part 1Threaded Fittings - BS21 ISO7 DIN 2999

MaterialsMaterials used for the manufacture of Astore pressure pipe fittings and valves are selected for their non toxicproperties and suitability for potable water as required by the appropriate international authorities.Both ABS and PVC-U comply with ISO 727 and the requirements of the World Health Organisation for potable water transportation.

ABSAll material used in our manufacture conforms to the toxicological requirements of the British PlasticsFederation/British Industrial Biological Research Association Code of Practice for Food Usage 45/5. It also fulfilsthe E.E.C. requirements for plastics materials in contact with foodstuffs.

UK Water Regulations Advisory Scheme:

Approved product for potable water. License No. 1212154

PVC-UTin stabilised compounds are used exclusively for PVC-U products and all formulations conform to the E.E.C.safety criteria for vinyl chloride monomer (CVN).



Drinking Water Inspectorate

Astore PVC-U is approved for use within public water supplies and by the Secretary of State. Astore PVC-U is listed in the ‘list of approved products’ published by the DWI. Astore manufactures two ranges of pipe. Only the Durapipe UK (RPR and RP1 codes) premium branded pipe is fully approved.

Gasket Seals and SeatsGaskets are made from Nitrile Rubber, O-Ring seals are made from EPDM, seats are PTFE except where statedotherwise.

Pressure Ratings All Pressure Ratings given below are at 20°C.

>PVC-U & ABS IMPERIAL

Pressure Rating 15 bar 9 bar 12 bar 9 bar 12 bar 15 bar 15 bar 12 bar 9 bar 9 bar 12 bar 15 bar

Size1/2" – 6"8" – 12"up to 2"2" – 8"11/4" – 8"1/2" – 6"1/2" – 4"6"8"1" – 8"6"1/2" – 4"

Jointing & InstallationDurapipe UK/Astore Solvent Cement mustbe used exclusively for the fabrication of anAstore Pipework System. Performanceguarantees are null and void if other solventcements are used.

Technical InformationThis document is a price list. The technicalinformation contained is abbreviated. For full technical information, includingdetailed information on jointing procedurestogether with design and installation, pleasecontact us on 0844 800 5509

Inch Systems Product PVC-U Fittings - Solvent CementPVC-U Fittings - Solvent Cement PVC-U Fittings - Threaded PVC-U Pipe Class C PVC-U Pipe Class D PVC-U Pipe Class E ABS Fittings - Solvent Cement ABS Fittings - Solvent Cement ABS Fittings - Solvent Cement ABS Pipe Class C ABS Pipe Class D ABS Pipe Class E


6.16

13.66

22.33

33.29

47.59

73.33

36.95

81.94

133.97

199.71

285.55

439.99

CODE PER LENGTH PER MSIZE PVC-U £ £2" R PRC.0630 3" R PRC.0900 4" R PRC.1100 5" R PRC.1400 6" R PRC.1600 8" R PRC.2250 Price per metre - 6 metre lengths

4.52

10.02

16.38

24.43

34.94

27.14

60.11

98.29

146.59

209.66

1.19

1.68

2.34

3.60

4.68

7.28

15.55

25.57

55.31

200.76

299.99

7.11

10.05

14.06

21.59

28.05

43.66

93.30

153.41

331.85

1204.57

1799.93

4.12

5.29

8.05

17.55

29.16

62.73

95.80

24.72

31.74

48.31

105.27

174.98

376.40

574.81

1.61

2.29

3.19

4.90

6.38

9.90

21.18

34.83

75.37

9.66

13.75

19.15

29.38

38.28

59.41

127.05

209.00

452.20

6 www.astore.co.uk

PIPE PVC-U PRESSURE PIPE Class E PRE

>PIPES PVC-U

PIPE PVC-U PRESSURE PIPE Class C PRC

4.17

5.67

8.00

11.14

13.61

18.57

25.01

34.02

48.02

66.81

81.66

111.41

PIPE PVC-U PRESSURE PIPE Class 7 PR7

21/2" PVC-U Pipe is available in the metric 75mm range.

OPTIMA PIPE PVC-U Class C MRC

OPTIMA PIPE PVC-U Class E MREPIPE PVC-U PRESSURE PIPE Class D PRD

OPTIMA PVC-U PIPEOptima branded (non-DWI approved pipe)

CODE PER LENGTH PER MSIZE PVC-U £ £11/4" R PRD.0400 11/2" R PRD.0500 2" R PRD.0630 3" R PRD.0900 4" R PRD.1100 6" R PRD.16008" R PRD.2250Price per metre - 6 metre lengths

CODE PER LENGTH PER MSIZE PVC-U £ £1/2" R PRE.0200 3/4" R PRE.0250 1" R PRE.0320 11/4" R PRE.0400 11/2" R PRE.0500 2" R PRE.0630 3" R PRE.0900 4" R PRE.1100 6" R PRE.1600 Price per metre - 6 metre lengths

CODE PER LENGTH PER MSIZE PVC-U £ £1/2" R PR7.0200 3/4" R PR7.0250 1" R PR7.0320 11/4" R PR7.0400 11/2" R PR7.0500 2" R PR7.0630 Price per metre - 6 metre lengths

CODE PER LENGTH PER MSIZE PVC-U £ £2" R MRC.06303" R MRC.09004" R MRC.11005" R MRC.14006" R MRC.1600

CODE PER LENGTH PER MSIZE PVC-U £ £1/2" R MRE.02003/4" R MRE.02501" R MRE.032011/4" R MRE.040011/2" R MRE.05002" R MRE.06303" R MRE.09004" R MRE.11006" R MRE.160010" R PRE.280012" R PRE.3150

DURAPIPE UK PREMIUMPVC-U PIPE (Fully Approved)


7

impe

rial

PVC-

U &

ABS

www.astore.co.uk

5.41

9.08

11.55

15.54

26.90

32.07

52.83

103.49

104.46

187.87

32.43

54.46

69.28

93.25

161.38

192.41

316.95

620.94

626.75

1,127.22

130.36782.14

4.13

6.38

8.36

12.49

16.50

20.63

41.51

66.69

24.78

38.26

50.16

74.92

98.97

123.75

249.08

400.15

7.08

8.05

11.43

20.05

20.29

27.59

42.49

48.29

68.57

120.31

121.73

165.52

PIPE ABS PRESSURE PIPE Class C PAC

PIPE ABS PRESSURE PIPE Class E PAE

PIPE ABS PRESSURE PIPE Class D PAD CODE PER LENGTH PER MSIZE ABS £ £6" S PAD.160A Price per metre - 6 metre lengths

>PIPES ABS

PIPE ABS PRESSURE PIPE Class T PAT

CODE PER LENGTH PER MSIZE ABS £ £1" S PAC.032A 11/4" S PAC.040A 11/2" S PAC.050A 2" S PAC.063A 21/2" S PAC.075A 3" S PAC.090A 4" S PAC.110A 5" S PAC.140A 6" S PAC.160A 8" S PAC.225A Price per metre - 6 metre lengths

CODE PER LENGTH PER MSIZE ABS £ £1/2" S PAE.020A 3/4" S PAE.025A 1" S PAE.032A 11/4" S PAE.040A 11/2" S PAE.050A 2" S PAE.063A 3" S PAE.090A 4" S PAE.110A

Price per metre - 6 metre lengths

CODE PER LENGTH PER MSIZE ABS £ £1/2" S PAT.020A 3/4" S PAT.025A 1" S PAT.032A 11/4" S PAT.040A 11/2" S PAT.050A 2" S PAT.063A Price per metre - 6 metre lengths


8 www.astore.co.uk

TEE 90° PLAIN TI4

UNION PLAIN BO4

SOCKET PLAIN MA4

ELBOW 90° PLAIN GO4 CODE CODE SIZE PVC-U £ ABS £1/2" R GO4.0200 S GO4.0200 3/4" R GO4.0250 S GO4.0250 1" R GO4.0320 S GO4.0320 11/4" R GO4.0400 S GO4.0400 11/2" R GO4.0500 S GO4.0500 2" R GO4.0630 S GO4.0630 21/2" R GO1.0750 S GO4.0750 3" R GO4.0900 S GO4.0900 4" R GO4.1100 S GO4.1100 5" R GO1.1400 S GO4.1400 6" R GO4.1600 S GO4.1600 8" R GO4.2250 S GO4.2250 10" R GO4.2800 - 12" R GO4.3150 -

ELBOW 45° PLAIN GY4 CODE CODE SIZE PVC-U £ ABS £1/2" R GY4.0200 S GY4.0200 3/4" R GY4.0250 S GY4.0250 1" R GY4.0320 S GY4.0320 11/4" R GY4.0400 S GY4.0400 11/2" R GY4.0500 S GY4.0500 2" R GY4.0630 S GY4.0630 21/2" R GY1.0750 S GY4.0750 3" R GY4.0900 S GY4.0900 4" R GY4.1100 S GY4.1100 5" R GY1.1400 S GY4.1400 6" R GY4.1600 S GY4.1600 8" R GY4.2250 S GY4.2250 10" R GY4.2800 - 12" R GY4.3150 -

BEND 90° PLAIN CU4 CODE CODE SIZE PVC-U £ ABS £1/2" R CU4.0200 S CU4.0200 3/4" R CU4.0250 S CU4.0250 1" R CU4.0320 S CU4.0320 11/4" R CU4.0400 S CU4.0400 11/2" R CU4.0500 S CU4.0500 2" R CU4.0630 S CU4.0630 21/2" R CU1.0750 S CU4.0750 3" R CU4.0900 S CU4.0900 4" R CU4.1100 S CU4.1100

INCH/METRIC SOCKET PLAIN MA5 CODE CODE SIZE PVC-U £ ABS £1/2" x 20mm R MA5.0200 S MA5.02003/4" x 25mm R MA5.0250 S MA5.0250 1" x 32mm R MA5.0320 S MA5.0320 11/4" x 40mm R MA5.0400 S MA5.0400 11/2" x 50mm R MA5.0500 S MA5.0500 2" x 63mm R MA5.0630 S MA5.0630 3" x 90mm R MA5.0900 S MA5.0900 4" x 110mm R MA5.1100 S MA5.1100

CODE CODE SIZE PVC-U £ ABS £1/2" R TI4.0200 S TI4.0200 3/4" R TI4.0250 S TI4.0250 1" R TI4.0320 S TI4.0320 11/4" R TI4.0400 S TI4.0400 11/2" R TI4.0500 S TI4.0500 2" R TI4.0630 S TI4.0630 21/2" R TI1.0750 S TI4.0750 3" R TI4.0900 S TI4.0900 4" R TI4.1100 S TI4.1100 5" R TI1.1400 S TI4.1400 6" R TI4.1600 S TI4.1600 8" R TI4.2250 S TI4.2250 10" R TI4.2800 - 12" R TI4.3150 -

CODE CODE SIZE PVC-U £ ABS £1/2" R BO4.0200 S BO4.0200 3/4" R BO4.0250 S BO4.0250 1" R BO4.0320 S BO4.0320 11/4" R BO4.0400 S BO4.0400 11/2" R BO4.0500 S BO4.0500 2" R BO4.0630 S BO4.0630 21/2" R BO1.0750 S BO4.0750 3" R BO4.0900 S BO4.0900 4" R BO4.1100 S BO4.1100

END CAP PLAIN CA4 CODE CODE SIZE PVC-U £ ABS £1/2" R CA4.0200 S CA4.0200 3/4" R CA4.0250 S CA4.0250 1" R CA4.0320 S CA4.0320 11/4" R CA4.0400 S CA4.0400 11/2" R CA4.0500 S CA4.0500 2" R CA4.0630 S CA4.0630 21/2" R CA1.0750 S CA4.0750 3" R CA4.0900 S CA4.0900 4" R CA4.1100 S CA4.1100 5" R CA1.1400 -6" R CA4.1600 -

>FITTINGS PLAIN

1.79

2.01

2.33

4.13

4.88

6.89

14.62

26.38

38.34

75.42

96.18

200.21

261.12

352.75

1.92

2.13

2.43

4.23

4.96

7.11

15.38

28.27

40.25

78.30

100.40

210.78

2.43

2.86

3.92

6.89

8.91

13.24

24.92

38.13

57.43

131.34

226.66

370.72

1,030.59

1,378.06

2.54

2.97

4.13

7.11

9.22

13.88

26.71

40.04

59.72

137.68

239.38

385.56

4.56

4.78

5.83

8.37

10.49

14.73

23.19

34.73

71.39

120.75

147.21

336.85

692.61

921.09

4.78

4.88

6.15

8.91

11.12

15.38

24.26

36.14

74.97

127.11

155.69

349.55

8.91

10.49

14.50

20.77

25.74

33.78

72.14

86.62

144.29

9.22

10.70

15.03

21.49

26.91

35.70

74.28

91.29

150.39

2.33

2.43

2.97

4.56

6.58

15.03

26.91

43.74

2.90

3.27

3.98

5.38

7.86

17.84

32.60

52.74

2.75

3.49

5.19

7.41

10.70

16.93

29.14

49.04

71.94

190.64

249.96

410.98

1,104.36

1,592.27

2.86

3.92

5.53

7.84

11.55

17.59

30.50

51.39

75.42

200.21

263.74

431.10

9.22

10.49

13.53

16.93

23.19

29.97

76.91

111.65

151.14

9.84

10.70

14.42

17.59

24.26

31.68

76.67

117.35

158.05

1.70

2.01

2.21

3.49

5.83

7.11

17.28

21.95

33.78

58.04

81.66

1.79

2.13

2.43

3.92

6.03

7.84

19.70

23.19

35.51

MTOMTO

MTOMTO

MTOMTO

MTOMTO

MTO = Made to Order (Please refer to our Terms & Conditions).

CODE CODE SIZE PVC-U £ ABS £1/2" R MA4.0200 S MA4.0200 3/4" R MA4.0250 S MA4.0250 1" R MA4.0320 S MA4.0320 11/4" R MA4.0400 S MA4.0400 11/2" R MA4.0500 S MA4.0500 2" R MA4.0630 S MA4.0630 21/2" R MA1.0750 S MA4.0750 3" R MA4.0900 S MA4.0900 4" R MA4.1100 S MA4.1100 5" R MA1.1400 S MA4.1400 6" R MA4.1600 S MA4.1600 8" R MA4.2250 S MA4.2250 10" R MA4.2800 - 12" R MA4.3150 -


9

impe

rial

PVC-

U &

ABS

www.astore.co.uk

REDUCING BUSH PLAIN RC4 CODE CODE SIZE PVC-U £ ABS £3/4" x 1/2" R RC4.025B S RC4.025B 1" x 1/2" R RC4.032B S RC4.032B 1" x 3/4" R RC4.032C S RC4.032C 11/4" x 1" R RC4.040D S RC4.040D 11/2" x 3/4" R RC4.050C S RC4.050C 11/2" x 1" R RC4.050D S RC4.050D 11/2" x 11/4" R RC4.050E S RC4.050E 2" x 1" R RC4.063D S RC4.063D 2" x 11/4" R RC4.063E S RC4.063E 2" x 11/2" R RC4.063F S RC4.063F 21/2" x 2" R RC4.075G S RC4.075G 3" x 11/2" R RC4.090F S RC4.090F 3" x 2" R RC4.090G S RC4.090G 3" x 21/2" R RC4.090H S RC4.090H 4" x 2" R RC4.110G S RC4.110G 4" x 3" R RC4.110I S RC4.110I 5" x 4" R RC4.140L S RC4.140L 6" x 4" R RC4.160L S RC4.160L 8" x 6" R RC4.225O S RC4.225O 10" x 8" R RC4.280R - 12" x 10" R RC4.315S -

1.79

2.33

2.33

3.09

3.72

3.72

3.72

5.19

5.19

5.19

9.22

14.73

14.73

14.73

20.22

20.22

58.34

62.82

134.51

389.13

477.19

1.92

2.43

2.43

3.16

4.13

4.13

4.13

5.53

5.53

5.53

9.84

16.93

16.93

16.93

21.19

21.19

61.23

65.25

140.88

BEND LONG RADIUS 90 DEGREE LU4

CODE CODE SIZE PVC-U £ ABS £3" R LU4.0900 S LU4.0900 4" R LU4.1100 S LU4.1100 6" R LU4.1600 S LU4.1600

LONG RADIUS 45 DEGREE LY4

CODE CODE SIZE PVC-U £ ABS £11/2" S LY4.0500 2" R LY4.0630 S LY4.0630 3" R LY4.0900 S LY4.0900 4" R LY4.1100 S LY4.1100

106.15

214.52

472.42

111.42

225.20

497.42

41.20

88.04

171.37

26.48

43.74

88.03

179.95

BEND LONG RADIUS 221/2 DEGREE LT4

CODE CODE SIZE PVC-U £ ABS £11/2" R LT4.0500 S LT4.0500 2" R LT4.0630 S LT4.0630 3" R LT4.0900 S LT4.0900 4" R LT4.1100 S LT4.1100 6" R LT4.1600 S LT4.1600

35.28

60.05

121.71

247.02

548.59

36.66

61.23

128.58

261.64

574.72

>FITTINGS PLAIN

N.B. Accessory discount applies to this item



SOCKET PLAIN/THREADED MA6 CODE CODE SIZE PVC-U £ ABS £1/2" R MA6.0200 S MA6.0200 3/4" R MA6.0250 S MA6.0250 1" R MA6.0320 S MA6.0320 11/4" R MA6.0400 S MA6.0400 11/2" R MA6.0500 S MA6.0500 2" R MA6.0630 S MA6.0630 21/2" R MA3.0750H -3" R MA6.0900 -4" R MA6.1100 -

ELBOW 90° PLAIN/THREADED GO6 CODE CODE SIZE PVC-U £ ABS £1/2" R GO6.0200 S GO6.0200 3/4" R GO6.0250 S GO6.0250 1" R GO6.0320 S GO6.0320 11/4" R GO6.0400 S GO6.0400 11/2" R GO6.0500 S GO6.0500 2" R GO6.0630 S GO6.0630 21/2" R GO3.0750H -3" R GO6.0900 -

4.96

5.53

6.89

10.70

12.39

16.10

40.04

45.45

52.22

5.19

5.71

7.11

11.12

13.04

17.17

5.83

6.78

8.37

17.38

19.18

27.13

45.23

61.23

6.47

6.89

8.91

18.22

20.35

28.83

TEE PLAIN/THREADED BRANCH TI6 CODE SIZE PVC-U £1/2" R TI6.0200 3/4" R TI6.0250 1" R TI6.0320 11/4" R TI6.0400 11/2" R TI6.0500 2" R TI6.0630

7.53

8.27

9.22

17.38

20.14

28.50

REDUCING BUSH PLAIN/THREADED RC6 CODE CODE SIZE PVC-U £ ABS £1/2" x 3/8" R RC6.020A S RC6.020A 3/4" x 1/2" R RC6.025B S RC6.025B 1" x 3/4" R RC6.032C S RC6.032C

3.40

4.01

5.53

3.72

4.35

5.71

MTOMTO

MTOMTOMTO

MTOMTOMTOMTO


MTOMTOMTOMTOMTO


CODE CODE SIZE PVC-U £ ABS £1/2" R TC6.0200 S TC6.0200 3/4" R TC6.0250 S TC6.0250 1" R TC6.0320 S TC6.0320 11/4" R TC6.0400 S TC6.0400 11/2" R TC6.0500 S TC6.0500 2" R TC6.0630 S TC6.0630 21/2" R TC6.0750 S TC6.0750 3" R TC6.0900 S TC6.0900 4" R TC6.1100 S TC6.1100

6.15

7.00

14.73

37.20

40.79

48.82

64.10

73.31

109.92

6.47

7.11

15.38

38.97

42.89

51.25

67.27

76.91

115.37

10 www.astore.co.uk

CODE CODE SIZE PVC-U £ ABS £1/2" R AM6.0200 S AM6.0200 3/4" R AM6.0250 S AM6.0250 1" R AM6.0320 S AM6.0320 11/4" R AM6.0400 S AM6.0400 11/2" R AM6.0500 S AM6.0500 2" R AM6.0630 S AM6.0630 21/2" R AM3.0750H -3" R AM6.0900 -4" R AM6.1100 -

ADAPTOR MALE PLAIN/FEMALE THREADED AF6

CODE CODE SIZE PVC-U £ ABS £1/2" R AF6.0200 S AF6.0200 3/4" R AF6.0250 S AF6.0250 1" R AF6.0320 S AF6.0320 11/4" R AF6.0400 S AF6.0400 11/2" R AF6.0500 S AF6.0500 2" R AF6.0630 S AF6.0630

>FITTINGS PLAIN/THREADED

3.16

4.01

5.71

7.53

9.63

13.88

3.40

4.35

6.03

7.66

10.28

14.42

2.97

3.49

5.39

7.41

9.51

12.93

32.17

38.21

51.57

2.97

3.92

5.39

7.53

9.76

13.96

CODE CODE SIZE PVC-U £ ABS £1/2" R FB6.0200 S FB6.0200 3/4" R FB6.0250 S FB6.0250 1" R FB6.0320 S FB6.032011/4" R FB6.0400 S FB6.040011/2" R FB6.0500 S FB6.0500 2" R FB6.0630 S FB6.0630

CODE CODE SIZE PVC-U £ ABS £1/2" R MB6.0200 S MB6.0200 3/4" R MB6.0250 S MB6.02501" R MB6.0320 S MB6.032011/4" R MB6.0400 S MB6.040011/2" R MB6.0500 S MB6.05002" R MB6.0630 S MB6.0630

13.73

20.90

24.02

32.48

44.82

67.98

15.80

23.16

26.58

37.36

51.39

79.43

15.48

22.36

25.22

35.21

49.72

76.69

14.72

21.27

24.72

25.63

47.67

70.82

BARREL NIPPLE PLAIN/THREADED BN6 CODE CODE SIZE PVC-U £ ABS £3/8" R BN6.0160 - 1/2" R BN6.0200 S BN6.0200 3/4" R BN6.0250 S BN6.0250 1" R BN6.0320 S BN6.0320 11/4" R BN6.0400 S BN6.0400 11/2" R BN6.0500 S BN6.0500 2" R BN6.0630 S BN6.0630 21/2" R BN6.0750 S BN6.0750 3" R BN6.0900 S BN6.0900 4" R BN6.1100 S BN6.1100

3.40

3.72

4.44

5.83

7.95

8.37

11.12

26.06

29.14

39.42

3.72

4.68

6.03

8.27

9.00

11.64

27.22

30.70

40.89

UNION PLAIN/THREADED BO6

CODE SIZE PVC-U £1/2" R BO6.0200 3/4" R BO6.0250 1" R BO6.0320 11/4" R BO6.0400 11/2" R BO6.05002" R BO6.0630

HOSE ADAPTOR BSP THREADED/METRIC PO3 CODE SIZE PVC-U £3/8" R PO3.016A 1/2" R PO3.020B 3/4" R PO3.025C 1" R PO3.032D 11/4" R PO3.040E 11/2" R PO3.050F 2" R PO3.063G

13.24

14.62

18.22

22.24

29.14

40.58

4.68

4.88

6.47

7.72

11.24

13.47

20.77N.B. Accessory discount applies to this item


ADAPTOR FEMALE PLAIN/MALE THREADED AM6

COMPOSITE UNION MALE BSP BRASS MB6

TANK CONNECTOR PLAIN/THREADED TC6 COMPOSITE UNION FEMALE BSP BRASS FB6


11

impe

rial

PVC-

U &

ABS

www.astore.co.uk

SOCKET THREADED MA2

CODE SIZE PVC-U £3/8" R MA2.0160 1/2" R MA2.0200 3/4" R MA2.0250 1" R MA2.0320 11/4" R MA2.0400 11/2" R MA2.0500 2" R MA2.0630 21/2" R MA2.0750 3" R MA2.0900 4" R MA2.1100

CODE SIZE PVC-U £3/8" R TA2.0160 1/2" R TA2.0200 3/4" R TA2.0250 1" R TA2.0320 11/4" R TA2.0400 11/2" R TA2.0500 2" R TA2.0630 21/2" R TA2.0750 3" R TA2.0900 4" R TA2.1100

TEE THREADED TI2

CODE SIZE PVC-U £3/8" R TI2.0160 1/2" R TI2.0200 3/4" R TI2.0250 1" R TI2.0320 11/4" R TI2.0400 11/2" R TI2.0500 2" R TI2.0630 21/2" R TI2.0750 3" R TI2.0900 4" R TI2.1100

CODE SIZE PVC-U £3/8" R GO2.0160 1/2" R GO2.0200 3/4" R GO2.0250 1" R GO2.0320 11/4" R GO2.0400 11/2" R GO2.0500 2" R GO2.0630 21/2" R GO2.0750 3" R GO2.0900 4" R GO2.1100

>FITTINGS THREADED

6.47

6.78

7.66

9.12

12.50

14.42

17.68

38.13

48.82

86.12

4.68

5.53

7.11

9.51

17.06

22.14

37.20

63.32

90.86

151.47

3.09

3.92

4.56

5.62

7.66

9.51

10.28

22.33

31.34

57.75

6.25

6.47

6.78

8.37

14.83

17.38

25.74

44.28

67.15

95.97

PLUG THREADED TA2

ELBOW 90° THREADED GO2

HEXAGON NIPPLE THREADED NI2

CODE SIZE PVC-U £3/8" R NI2.0160 1/2" R NI2.0200 3/4" R NI2.0250 1" R NI2.0320 11/4" R NI2.0400 11/2" R NI2.0500 2" R NI2.0630 21/2" R NI2.0750 3" R NI2.0900 4" R NI2.1100

3.09

3.26

4.13

5.62

7.72

8.37

10.58

22.67

32.52

46.20

REDUCING NIPPLE THREADED NR2

CODE SIZE PVC-U £1/2" x 3/8" R NR2.020A 3/4" x 1/2" R NR2.025B 1" x 3/4" R NR2.032C 11/4" x 1" R NR2.040D 11/2" x 11/4" R NR2.050E 2" x 11/2" R NR2.063F 21/2" x 2" R NR2.075G 3" x 21/2" R NR2.090H 4" x 3" R NR2.110I

3.09

4.68

6.25

7.53

9.33

14.73

23.61

29.34

47.34

REDUCING PIECE FEMALE THREADED/MALE THREADED MG2

CODE SIZE PVC-U £1/2" x 3/8" R MG2.016B 3/4" x 1/2" R MG2.020C 1" x 3/4" R MG2.025D 11/4" x 1" R MG2.032E 11/2" x 11/4" R MG2.040F 2" x 11/2" R MG2.050G 21/2" x 2" R MG2.063H 3" x 21/2" R MG2.075I 4" x 3" R MG2.090L

5.39

6.15

7.32

9.95

11.55

14.19

30.50

38.97

67.79


12 www.astore.co.uk

>FITTINGS THREADED

END CAP THREADED CA2

CODE SIZE PVC-U £3/8" R CA2.0160 1/2" R CA2.0200 3/4" R CA2.0250 1" R CA2.0320 11/4" R CA2.0400 11/2" R CA2.0500 2" R CA2.0630 21/2" R CA2.0750 3" R CA2.0900 4" R CA2.1100

5.19

6.78

7.72

8.14

8.50

11.24

14.08

36.23

48.07

54.87

BACK NUT THREADED NU2

CODE CODESIZE PVC-U £ ABS £1/2" R NU2.0200 S NU2.0200 3/4" R NU2.0250 S NU2.0250 1" R NU2.0320 S NU2.0320 11/4" R NU2.0400 S NU2.0400 11/2" R NU2.0500 S NU2.0500 2" R NU2.0630 S NU2.0630 21/2" R NU2.0750 S NU2.075N 3" R NU2.090N S NU2.090N 4" R NU2.110N S NU2.110N

UNION THREADED BO2

CODE SIZE PVC-U £3/8" R BO2.0160 1/2" R BO2.0200 3/4" R BO2.0250 1" R BO2.0320 11/4" R BO2.0400 11/2" R BO2.0500 2" R BO2.0630 21/2" R BO2.0750 3" R BO2.0900 4" R BO2.1100

REDUCING PIECE FEMALE THREADED MR2 CODE SIZE PVC-U £1/2" x 3/8" R MR2.020A 3/4" x 1/2" R MR2.025B 1" x 3/4" R MR2.032C 11/4" x 1" R MR2.040D 11/2" x 11/4" R MR2.050E 2" x 11/2" R MR2.063F 21/2" x 2" R MR2.075G 3" x 21/2" R MR2.090H 4" x 3" R MR2.110I

BARREL NIPPLE THREADED/THREADED BA2

CODE CODE SIZE PVC-U £ ABS £3/8" R BA2.0160 - 1/2" R BA2.0200 S BA2.0200 3/4" R BA2.0250 S BA2.0250 1" R BA2.0320 S BA2.0320 11/4" R BA2.0400 S BA2.0400 11/2" R BA2.0500 S BA2.0500 2" R BA2.0630 S BA2.0630 21/2" R BA2.0750 S BA2.0750 3" R BA2.0900 S BA2.0900 4" R BA2.1100 S BA2.1100

12.82

14.83

16.10

22.98

28.27

39.73

55.92

88.54

128.48

173.82

2.65

2.86

4.96

11.03

11.97

12.93

18.99

21.27

26.78

2.75

2.97

5.19

11.24

12.82

13.47

20.35

22.98

28.92

5.39

6.15

7.32

9.95

11.55

14.19

30.50

38.97

67.79

3.72

3.92

4.44

5.93

7.95

8.37

11.12

24.99

28.70

38.77

4.13

4.88

6.47

8.37

9.12

11.64

26.38

30.70

41.31

ELBOW 45° THREADED GY2

CODE SIZE PVC-U £3/8" R GY2.0160 1/2" R GY2.0200 3/4" R GY2.0250 1" R GY2.0320 11/4" R GY2.0400 11/2" R GY2.0500 2" R GY2.0630 21/2" R GY2.0750 3" R GY2.0900 4" R GY2.1100

REDUCING PIECE MALE THREADED/FEMALE THREADED RI2

CODE SIZE PVC-U £1/2" x 3/8" R RI2.020A 3/4" x 1/2" R RI2.025B 1" x 1/2" R RI2.032B 1" x 3/4" R RI2.032C 11/4" x 1/2" R RI2.040B 11/4" x 3/4" R RI2.040C 11/4" x 1" R RI2.040D 11/2" x 3/4" R RI2.050C 11/2" x 1" R RI2.050D 11/2 " x 11/4" R RI2.050E 2" x 1" R RI2.063D 2" x 11/4" R RI2.063E 2" x 11/2" R RI2.063F 21/2" x 11/4" R RI2.075E 21/2" x 11/2" R RI2.075F 21/2" x 2" R RI2.075G 3" x 11/2" R RI2.090F 3" x 2" R RI2.090G 3" x 21/2" R RI2.090H 4" x 2" R RI2.110G 4" x 21/2" R RI2.110H 4" x 3" R RI2.110I

3.09

4.68

6.25

6.25

7.66

7.66

7.66

9.22

9.22

9.22

14.73

14.73

14.73

23.61

23.61

23.61

29.34

29.34

29.34

47.34

47.34

47.34

5.53

6.03

6.47

8.69

13.24

17.59

26.06

43.10

63.64

70.33


13

impe

rial

PVC-

U &

ABS

www.astore.co.uk

FULL FACE PLAIN DRILLED BS10 Table E FF4

CODE CODE SIZE PVC-U £ ABS £1/2" R FF4.0200 S FF4.0200 3/4" R FF4.0250 S FF4.0250 1" R FF4.0320 S FF4.0320 11/4" R FF4.0400 S FF4.0400 11/2" R FF4.0500 S FF4.0500 2" R FF4.0630 S FF4.0630 3" R FF4.0900 S FF4.0900 4"E R FF4.110E S FF4.110E

BLANK FLANGE DRILLED Table D & E FCD

CODE CODE SIZE PVC-U £ ABS £11/2" R FCD.0500 -2" R FCD.0630 S FCD.0630 3" R FCD.0900 S FCD.0900 4" D R FCD.1100 S FCD.1100 4" E R FCD.110E S FCD.110E 6" R FCD.1600 S FCD.1600

BLANK FLANGE DRILLED PN16 FCN

CODE CODE SIZE PVC-U £ ABS £1/2" R FCN.0200 -3/4" R FCN.0250 -1" R FCN.0320 -11/2" R FCN.0500 -2" R FCN.0630 S FCN.0630 3" R FCN.0900 S FCN.0900 4" R FCN.1100 S FCN.11006" R FCN.1600 S FCN.1600

BLANK FLANGE UNDRILLED FCP CODE CODE SIZE PVC-U £ ABS £1/2" R FCP.0200 -3/4" R FCP.0250 -1" R FCP.0320 S FCP.0630 11/2" R FCP.0500 S FCP.05002" R FCP.0630 S FCP.0630 3" R FCP.0900 S FCP.0900 4" R FCP.1100 S FCP.1100 6" R FCP.1600 S FCP.1600

FULL FACE FLANGE PN16 FFN CODE CODE SIZE PVC-U £ ABS £1/2" R FFN.0200 S FFN.0200 3/4" R FFN.0250 S FFN.0250 1" R FFN.0320 S FFN.0320 11/4" R FFN.0400 S FFN.0400 11/2" R FFN.0500 S FFN.0500 2" R FFN.0630 S FFN.0630 21/2" R FFN1.0750 S FFN.0750 3" R FFN.0900 S FFN.0900 4" R FFN.1100 S FFN.1100

>FLANGES

STUB FLANGE SERRATED FACE QR4 CODE CODE SIZE PVC-U £ ABS £1/2" R QR4.0200 S QR4.0200 3/4" R QR4.0250 S QR4.0250 1" R QR4.0320 S QR4.0320 11/4" R QR4.0400 S QR4.0400 11/2" R QR4.0500 S QR4.0500 2" R QR4.0630 S QR4.0630 21/2" R QR1.0750 S QR4.0750 3" R QR4.0900 S QR4.0900 4" R QR4.1100 S QR4.1100 5" R QR1.1400 S QR4.1400 6" R QR4.1600 S QR4.1600 8" R QR4.2250 S QR4.2250 10" R QR4.2800 - 12" R QR4.3150 -

10.28

10.49

11.24

13.34

15.66

20.55

37.07

51.39

10.49

10.70

11.24

13.47

15.80

20.66

38.77

51.68

10.28

10.49

11.24

13.34

15.66

20.55

32.94

37.07

51.39

10.49

10.70

11.24

13.47

15.66

20.66

34.62

38.77

51.68

2.13

2.21

2.75

4.96

7.53

10.70

17.49

21.49

28.27

63.87

72.87

151.47

189.18

259.19

2.21

2.33

2.86

5.09

7.53

11.55

18.33

22.56

29.21

67.15

75.95

158.90

40.25

46.60

81.56

103.80

103.80

182.20

47.02

82.63

104.87

104.87

183.89

28.37

31.78

34.94

40.25

46.60

81.56

103.80

182.20

47.02

82.63

104.87

183.89

28.37

31.78

34.94

40.25

46.60

81.56

103.80

182.20

33.69

38.95

47.02

82.63

104.87

183.89

MTOMTO


MTOMTOMTOMTOMTOMTO

MTOMTOMTOMTOMTOMTOMTOMTO

MTOMTOMTOMTOMTOMTOMTOMTO





14 www.astore.co.uk

FLANGES & BRACKETS>FLANGES

GASKET–FULL FACE DRILLED BS10 Table D or E GFF

SIZE CODE £1/2" E GFF.0200 3/4" E GFF.0250 1" E GFF.0320 11/4" E GFF.0400 11/2" E GFF.0500 2" E GFF.0630 21/2" E GFF.0750 3" E GFF.0900 4" D E GFF.1100 4" E E GFF.110E 6" E GFF.1600

GASKET–FULL FACE DRILLED PN16 GFN

SIZE CODE £1/2" E GFN.0200 3/4" E GFN.0250 1" E GFN.0320 11/4" E GFN.0400 11/2" E GFN.0500 2" E GFN.0630 21/2" E GFN.0750 3" E GFN.0900 4" E GFN.1100 4" E GFN.110E 6" E GFN.1600

GASKET–STUB FLANGE FOR QR4 STUBS GQP

SIZE CODE £1/2" E GQP.0200 3/4" E GQP.0250 1" E GQP.0320 11/4" E GQP.0400 11/2" E GQP.0500 2" E GQP.0630 21/2" E GQP.0750 3" E GQP.0900 4" E GQP.1100 5" E GQP.1400 6" E GQP.1600 8" E GQP.2250

BACKING RING Galvanised mild steel drilled ASA150 BR4A

SIZE CODE £1/2" G BR4.020A 3/4" G BR4.025A 1" G BR4.032A 11/4" G BR4.040A 11/2" G BR4.050A 2" G BR4.063A 21/2" G BR4.075A 3" G BR4.090A 4" G BR4.110A 5" G BR4.140A 6" G BR4.160A 8" G BR4.225A TO SUIT PVC STUB 8" G BR4.22DA TO SUIT ABS STUB

BACKING RING Galvanised mild steel drilled BS10 Table D BR4

SIZE CODE £1/2" G BR4.0200 3/4" G BR4.0250 1" G BR4.0320 11/4" G BR4.0400 11/2" G BR4.0500 2" G BR4.0630 21/2" G BR4.0750 3" G BR4.0900 4" E G BR4.110E 5" G BR4.1400 6" G BR4.1600 8" G BR4.2250 TO SUIT PVC STUB 8" G BR4.225D TO SUIT ABS STUB 10" G BR4.2800 12" G BR4.3150

BACKING RING Galvanised mild steel drilled PN16 BR4N

SIZE CODE £1/2" G BR4.020N 3/4" G BR4.025N 1" G BR4.032N 11/4" G BR4.040N 11/2" G BR4.050N 2" G BR4.063N 21/2" G BR4.075N 3" G BR4.090N 4" G BR4.110N 5" G BR4.140N 6" G BR4.160N 8" G BR4.225N TO SUIT PVC STUB 8" G BR4.22DN TO SUIT ABS STUB 10" G BR4.280N 12" G BR4.315N

9.51

9.84

11.03

11.24

13.88

19.60

26.91

29.78

38.55

60.79

63.56

87.09

87.09

8.37

9.46

9.84

10.28

12.50

17.68

24.92

26.91

34.73

58.26

61.65

79.76

79.76

110.39

120.32

9.51

9.84

11.03

11.25

13.88

19.60

26.91

29.78

38.55

60.79

63.56

87.09

87.09

143.91

191.39

2.86

2.97

3.45

4.01

5.53

6.03

7.51

8.37

12.21

12.21

19.48

2.86

2.97

3.45

4.01

5.53

6.03

7.51

8.37

12.21

12.21

19.48

1.47

1.79

2.43

2.86

2.97

3.09

3.26

3.72

5.31

7.66

7.72

16.10







NOTE: All items on this page are suitable with both

ABS & PVC-U systems.


15

impe

rial

PVC-

U &

ABS

www.astore.co.uk

>PIPE BRACKETS

>TOOLS

>ACCESSORIES

PIPE BRACKET ST4

SIZE CODE £3/8" P ST4.0160 1/2" P ST4.0200 3/4" P ST4.0250 1" P ST4.0320

PIPE CUTTER

PIPE BRACKET WITH STRAP ST4

SIZE CODE £11/4" P ST4.040011/2" P ST4.05002" P ST4.063021/2" P ST1.07503" P ST4.09004" P ST4.1100

1.47

1.58

1.92

2.13

203.09

479.66

12.96

27.29

2.75

3.09

3.92

5.71

7.11

12.50

ABS SOLVENT CEMENT ACO

SIZE CODE £1/2 litre S ACO.0200 14.50

ASTORE ECO CLEANER (ABS/PVC-U) CFO

SIZE CODE £1/2 litre M CFO.0200 12.21

PVC-U SOLVENT CEMENT PCO

SIZE CODE £1/2 litre R PCO.0200 25.74

CHEMICALLY RESISTANT PVC-U CEMENT PCO

SIZE CODE £1 litre R PCO.0100 65.76

CHEMICALLY RESISTANT CLEANER CFO







RH PVC-U SOLVENT CEMENT (THF FREE) PCO



SIZE CODE £16-63mm T TFO.0100 50-125mm T TFO.0101 16-63mm spare cutter wheel T TFO.0102 50-125mm spare cutter wheel T TFO.0103

CHAMFERRING TOOLS

80.41

531.85

SIZE CODE £16-63mm chamferring tool C AFO.0100

32-160mm chamferring tool C AFO.0102

FIBRE SEAL (SEALING TAPE FOR THREADED CONNECTIONS)

8.40

SIZE CODE £Fibre seal tape F AFO.0100

NEW

NEW


16 www.astore.co.uk

StandardsAstore products are manufactured in accordance with the following standards:

Fittings Socket Dimensions - DIN 8063 ISO277/1

Threaded Fittings - BS 21 ISO7 DIN2999

PVC-U Pipe - KIWA 49 (Revision 1) DIN 8061/2

MaterialsMaterials used for manufacture of Astore pressure pipe fittings and valves are selected for their non toxicproperties and suitability for potable water as required by the appropriate international authorities.

Both ABS and PVC-U comply with ISO 727 and the requirements of the World Health Organisation for potable

water transportation.



Drinking Water Inspectorate

Astore PVC-U is approved for use within public water supplies and by the Secretary of State. Astore PVC-U is listed in the “list of approved products” published by the DWI.

PVC-UTin stabilised compounds are used exclusively for PVC-U products and all formulations conform to the E.E.C.safety criteria for vinyl chloride monomer (CVN).

Gasket Seals and SeatsGaskets are made from Nitrile Rubber, O-Ring seals are made from EPDM, seats are PTFE except wherestated otherwise.

Pressure Ratings All Pressure Ratings given below are at 20˚C.

Threaded fittings are designed for use up to 10 bar at 20˚C

Astore PVC-U fittings have been approved by The Institute of Italian Plastics.IIP Certificate No. 280

>PVC-U METRIC

Metric Systems Product Size Pressure RatingPVC-U Fittings 16mm-160mm 16 bar

200mm-315mm 10 barPVC-U Pipe 20mm-160mm 10 bar

20mm-160mm 16 bar


1.10

1.71

2.43

3.68

5.68

9.68

13.70

19.56

22.38

17

met

ricPV

C-U

www.astore.co.uk

2.29

3.32

5.24

6.73

9.57

13.66

20.16

25.95

42.87

11.46

16.58

26.21

33.63

47.84

68.30

100.82

129.73

214.36

1.68

2.43

3.84

6.40

9.12

13.03

14.79

19.04

31.46

8.38

12.13

19.21

31.99

45.59

65.16

73.94

95.21

157.31

1.25

2.05

3.32

5.02

7.74

10.15

14.34

20.49

30.49

6.23

10.25

16.58

25.10

38.70

50.77

71.68

102.47

152.45

PIPE PVC-U PRESSURE PIPE P1010 BAR PLAIN END

PIPE PVC-U PRESSURE PIPE P1616 BAR PLAIN END

>PIPES PVC-U

* Larger sizes available upon request

OPTIMA PIPE PVC-U PN10 Plain End M10

OPTIMA PIPE PVC-U PN16 Plain End M16 CODE PER LENGTH PER MSIZE PVC-U £ £20 R M16.020025 R M16.025032 R M16.032040 R M16.040050 R M16.050063 R M16.063075 R M16.075090 R M16.0900110 R M16.1100

CODE PER LENGTH PER MSIZE PVC-U £ £32 R P10.0320 40 R P10.0400 50 R P10.0500 63 R P10.0630 75 R P10.0750 90 R P10.0900 110 R P10.1100 125 R P10.1250 160 R P10.1600 Price per metre - 5 metre lengths

CODE PER LENGTH PER MSIZE PVC-U £ £20 R P16.0200 25 R P16.0250 32 R P16.0320 40 R P16.0400 50 R P16.0500 63 R P16.0630 75 R P16.0750 90 R P16.0900 110 R P16.1100 Price per metre - 5 metre lengths

5.51

8.53

12.13

18.39

28.41

48.39

68.49

97.78

111.91

CODE PER LENGTH PER MSIZE PVC-U £ £32 R M10.032040 R M10.040050 R M10.050063 R M10.063075 R M10.075090 R M10.0900110 R M10.1100MTO 125 R M10.1250MTO 160 R M10.1600

OPTIMA PVC-U PIPEDURAPIPE UK PREMIUM

PVC-U PIPE (Fully Approved)


18 www.astore.co.uk

SOCKET PLAIN* MA1

CODE SIZE PVC-U £16 R MA1.0160 20 R MA1.0200 25 R MA1.0250 32 R MA1.0320 40 R MA1.0400 50 R MA1.0500 63 R MA1.0630 75 R MA1.0750 90 R MA1.0900 110 R MA1.1100 125 R MA1.1250 140 R MA1.1400 160 R MA1.1600 200 R MA1.2000 225 R MA1.2250 250 R MA1.2500 280 R MA1.2800 315 R MA1.3150

TEE 90° PLAIN* TI1

CODE SIZE PVC-U £16 R TI1.0160 20 R TI1.0200 25 R TI1.0250 32 R TI1.0320 40 R TI1.0400 50 R TI1.0500 63 R TI1.0630 75 R TI1.0750 90 R TI1.0900 110 R TI1.1100 125 R TI1.1250 140 R TI1.1400 160 R TI1.1600 200 R TI1.2000 225 R TI1.2250 250 R TI1.2500 280 R TI1.2800 315 R TI1.3150

UNION PLAIN BO1

CODE SIZE PVC-U £16 R BO1.0160 20 R BO1.0200 25 R BO1.0250 32 R BO1.0320 40 R BO1.0400 50 R BO1.0500 63 R BO1.0630 75 R BO1.0750 90 R BO1.0900 110 R BO1.1100

ELBOW 90° PLAIN* GO1

CODE SIZE PVC-U £16 R GO1.0160 20 R GO1.0200 25 R GO1.0250 32 R GO1.0320 40 R GO1.0400 50 R GO1.0500 63 R GO1.0630 75 R GO1.075090 R GO1.0900 110 R GO1.1100 125 R GO1.1250 140 R GO1.1400 160 R GO1.1600 200 R GO1.2000 225 R GO1.2250 250 R GO1.2500 280 R GO1.2800 315 R GO1.3150

METRIC/INCH SOCKET PLAIN MA5

CODE SIZE PVC-U £1/2" x 20mm R MA5.0200 3/4" x 25mm R MA5.0250 1" x 32mm R MA5.0320 11/4" x 40mm R MA5.0400 11/2" x 50mm R MA5.0500 2" x 63mm R MA5.0630 3" x 90mm R MA5.0900 4" x 110mm R MA5.1100

>FITTINGS PLAIN

1.47

1.58

1.79

2.01

3.09

3.92

5.62

14.62

22.14

31.68

51.99

75.42

80.59

164.51

200.50

264.49

334.20

575.06

1.70

2.13

2.54

3.09

5.53

7.00

10.79

24.92

31.56

47.98

92.98

131.34

186.09

326.87

373.68

921.20

1,082.94

1,197.33

2.33

2.43

2.97

4.56

6.58

15.03

26.91

43.74

2.01

2.54

2.97

4.13

5.83

9.22

13.76

29.14

39.92

60.69

123.93

190.64

208.03

377.31

410.66

601.12

714.00

1,437.69

6.36

7.53

8.27

11.12

13.76

19.39

25.74

76.91

104.53

127.00

ELBOW 45° PLAIN* GY1

CODE SIZE PVC-U £16 R GY1.0160 20 R GY1.0200 25 R GY1.0250 32 R GY1.0320 40 R GY1.0400 50 R GY1.0500 63 R GY1.0630 75 R GY1.075090 R GY1.0900 110 R GY1.1100 125 R GY1.1250 140 R GY1.1400 160 R GY1.1600 200 R GY1.2000 225 R GY1.2250 250 R GY1.2500 280 R GY1.2800 315 R GY1.3150

3.26

3.60

3.82

4.44

6.47

7.00

12.07

23.19

28.37

60.27

92.79

120.75

140.45

250.52

337.15

678.32

799.82

1,263.99


19

met

ricPV

C-U

www.astore.co.uk

>FITTINGS PLAIN

TEE 45° PLAIN* TY1

CODE SIZE PVC-U £32 R TY1.0320 40 R TY1.0400 50 R TY1.0500 63 R TY1.0630

END CAP PLAIN* CA1

CODE SIZE PVC-U £16 R CA1.0160 20 R CA1.0200 25 R CA1.0250 32 R CA1.0320 40 R CA1.0400 50 R CA1.0500 63 R CA1.0630 75 R CA1.0750 90 R CA1.0900 110 R CA1.1100 125 R CA1.1250 140 R CA1.1400 160 R CA1.1600

BEND 90° PLAIN* CU1

CODE SIZE PVC-U £20 R CU1.0200 25 R CU1.0250 32 R CU1.0320 40 R CU1.0400 50 R CU1.0500 63 R CU1.0630 75 R CU1.0750 90 R CU1.0900 110 R CU1.1100

8.14

10.18

13.67

19.39

23.61

30.93

72.14

78.90

136.76

1.27

1.47

1.70

1.79

2.97

4.44

5.71

17.28

18.42

28.27

49.90

58.04

73.84

16.63

24.45

28.37

42.16

*Larger sizes available upon request

REDUCING BUSH PLAIN* RC1 CODESIZE PVC-U £20 x 16 R RC1.020A 25 x 16 R RC1.025A 25 x 20 R RC1.025B 32 x 16 R RC1.032A 32 x 20 R RC1.032B 32 x 25 R RC1.032C 40 x 20 R RC1.040B 40 x 25 R RC1.040C40 x 32 R RC1.040D 50 x 25 R RC1.050C 50 x 32 R RC1.050D 50 x 40 R RC1.050E 63 x 32 R RC1.063D 63 x 40 R RC1.063E 63 x 50 R RC1.063F 75 x 40 R RC1.075E 75 x 50 R RC1.075F 75 x 63 R RC1.075G 90 x 50 R RC1.090F 90 x 63 R RC1.090G 90 x 75 R RC1.090H 110 x 63 R RC1.110G 110 x 75 R RC1.110H 110 x 90 R RC1.110I 125 x 75 R RC1.125H 125 x 90 R RC1.125I 125 x 110 R RC1.125L 140 x 90 R RC1.140I 140 x 110 R RC1.140L 140 x 125 R RC1.140M 160 x 110 R RC1.160L 160 x 125 R RC1.160M 160 x 140 R RC1.160N 200 x 160 R RC1.200O 225 x 160 R RC1.225O 225 x 200 R RC1.225P 250 x 160 R RC1.250O 250 x 200 R RC1.250P 250 x 225 R RC1.250Q 280 x 225 R RC1.280Q 315 x 200 R RC1.315P 315 x 225 R RC1.315Q 315 x 250 R RC1.315R 315 x 280 R RC1.315S

1.27

1.47

1.47

1.92

1.92

1.92

2.54

2.54

2.54

2.97

2.97

2.97

3.92

3.92

3.92

7.53

7.53

7.53

13.04

13.04

13.04

17.06

17.06

17.06

30.29

30.29

30.29

39.42

39.42

39.42

53.18

53.18

53.18

91.93

134.64

134.64

218.73

218.73

218.73

339.06

367.66

367.66

367.66

367.66


20 www.astore.co.uk

REDUCING PIECE MALE PLAIN/FEMALE PLAIN RL1

CODE SIZE PVC-U £160 x 110 R RL1.160L

REDUCING SOCKET PLAIN* MR1 CODE SIZE PVC-U £20 x 16 R MR1.020A 25 x 20 R MR1.025B 32 x 25 R MR1.032C 40 x 32 R MR1.040D 50 x 40 R MR1.050E 63 x 50 R MR1.063F 75 x 63 R MR1.075G 90 x 75 R MR1.090H 110 x 90 R MR1.110I 125 x 110 R MR1.125L 140 x 110 R MR1.140L

CROSS PLAIN* CR1

CODE SIZE PVC-U £25 R CR1.0250 32 R CR1.0320 40 R CR1.0400 50 R CR1.0500 63 R CR1.0630

REDUCING TEE PLAIN* TR1

CODE SIZE PVC-U £20 x 16 R TR1.020A 25 x 16 R TR1.025A 25 x 20 R TR1.025B 32 x 16 R TR1.032A 32 x 20 R TR1.032B 32 x 25 R TR1.032C 40 x 16 R TR1.040A 40 x 20 R TR1.040B 40 x 25 R TR1.040C 40 x 32 R TR1.040D 50 x 20 R TR1.050B 50 x 25 R TR1.050C 50 x 32 R TR1.050D 50 x 40 R TR1.050E 63 x 25 R TR1.063C 63 x 32 R TR1.063D 63 x 40 R TR1.063E 63 x 50 R TR1.063F 75 x 32 R TR1.075D 75 x 40 R TR1.075E 75 x 50 R TR1.075F 75 x 63 R TR1.075G 90 x 40 R TR1.090E 90 x 50 R TR1.090F 90 x 63 R TR1.090G 90 x 75 R TR1.090H 110 x 50 R TR1.110F 110 x 63 R TR1.110G 110 x 75 R TR1.110H 110 x 90 R TR1.110I 160 x 110 R TR1.160L

>FITTINGS PLAIN

71.94

1.70

1.79

2.43

2.75

3.16

5.53

14.31

17.68

30.19

52.53

67.47

2.54

2.97

2.97

4.01

4.01

4.01

5.93

5.93

5.93

5.93

9.22

9.22

9.22

9.22

13.76

13.76

13.76

13.76

24.39

24.39

24.39

24.39

39.92

39.92

39.92

39.92

60.69

60.69

60.69

60.69

130.03

8.06

9.51

14.93

18.86

26.16


21

met

ricPV

C-U

www.astore.co.uk

SOCKET PLAIN/BSP THREADED MA3

CODE SIZE PVC-U £16 x 3/8" R MA3.016A 20 x 1/2" R MA3.020B 25 x 3/4" R MA3.025C 32 x 1" R MA3.032D 40 x 11/4" R MA3.040E 50 x 11/2" R MA3.050F 63 x 2" R MA3.063G 75 x 21/2" R MA3.075H 90 x 3" R MA3.090I 110 x 4" R MA3.110L

CODE SIZE PVC-U £20 x 1/2" R AF3.020B 20 x 3/4" R AF3.02OC 25 x 1/2" R AF3.025B 25 x 3/4" R AF3.025C 25 x 1" R AF3.025D 32 x 3/4" R AF3.032C 32 x 1" R AF3.032D 40 x 1" R AF3.040D 40 x 11/4" R AF3.040E 50 x 11/2" R AF3.050F 50 x 2" R AF3.050G 63 x 2" R AF3.063G 75 x 2" R AF3.075G 75 x 21/2" R AF3.075H 75 x 3" R AF3.075I 90 x 21/2" R AF3.090H 90 x 3" R AF3.090I 90 x 4" R AF3.090L 110 x 3" R AF3.110I 110 x 4" R AF3.110L

ADAPTOR PLAIN FEMALE/BSP THREADED MALE SPIGOT AM3

CODE SIZE PVC-U £12 x 16 x 3/8" R AM3.012A 16 x 20 x 3/8" R AM3.016A 16 x 20 x 1/2" R AM3.016B 20 x 25 x 3/8" R AM3.020A 20 x 25 x 1/2" R AM3.020B 20 x 25 x 3/4" R AM3.020C 25 x 32 x 1/2" R AM3.025B 25 x 32 x 3/4" R AM3.025C 25 x 32 x 1" R AM3.025D 32 x 40 x 3/4" R AM3.032C 32 x 40 x 1" R AM3.032D 32 x 40 x 11/4" R AM3.032E 40 x 50 x 1" R AM3.040D 40 x 50 x 11/4" R AM3.040E 40 x 50 x 11/2" R AM3.040F 50 x 63 x 11/4" R AM3.050E 50 x 63 x 11/2" R AM3.050F 50 x 63 x 2" R AM3.050G 63 x 75 x 11/2" R AM3.063F 63 x 75 x 2" R AM3.063G 63 x 75 x 21/2" R AM3.063H 75 x 90 x 2" R AM3.075G 75 x 90 x 21/2" R AM3.075H 75 x 90 x 3" R AM3.075I 90 x 110 x 21/2" R AM3.090H 90 x 110 x 3" R AM3.090I 90 x 110 x 4" R AM3.090L 110 x 125 x 3" R AM3.110I 110 x 125 x 4" R AM3.110L

ELBOW 90° PLAIN/BSP THREADED GO3

CODE SIZE PVC-U £16 x 3/8" R GO3.016A 20 x 1/2" R GO3.020B 25 x 3/4" R GO3.025C 32 x 1" R GO3.032D 40 x 11/4" R GO3.040E 50 x 11/2" R GO3.050F 63 x 2" R GO3.063G 75 x 21/2" R GO3.075H 90 x 3" R GO3.090I 110 x 4" R GO3.110L

TEE 90° PLAIN/BSP THREADED BRANCH TI3

CODE SIZE PVC-U £16 x 16 x 3/8" R TI3.016A 20 x 20 x 1/2" R TI3.020B 25 x 25 x 3/4" R TI3.025C 32 x 32 x 1" R TI3.032D 40 x 40 x 11/4" R TI3.040E 50 x 50 x 11/2" R TI3.050F 63 x 63 x 2" R TI3.063G 75 x 75 x 21/2" R TI3.075H 90 x 90 x 3" R TI3.090I 110 x 110 x 4" R TI3.110L

UNION PLAIN/BSP THREADED BO3 CODE SIZE PVC-U £16 x 3/8" R BO3.016A 20 x 1/2" R BO3.020B 25 x 3/4" R BO3.025C 32 x 1" R BO3.032D 40 x 11/4" R BO3.040E 50 x 11/2" R BO3.050F 63 x 2" R BO3.063G 75 x 21/2" R BO3.075H 90 x 3" R BO3.090I 110 x 4" R BO3.110L


3.49

3.72

4.01

5.19

8.06

9.76

12.93

40.04

42.60

53.18

3.16

4.23

4.78

6.36

13.04

14.62

21.08

45.23

51.39

70.86

3.49

3.72

5.19

5.83

9.22

12.07

18.22

44.90

47.15

81.46

13.76

13.88

14.83

19.29

22.24

32.17

48.51

76.37

104.34

127.00

4.35

4.01

5.19

5.19

5.19

6.15

6.15

7.19

7.19

12.50

12.50

15.15

25.11

25.11

25.11

36.14

36.14

36.14

45.64

45.64

2.65

2.65

2.65

2.75

2.75

2.75

3.16

3.16

3.16

3.92

3.92

3.92

7.84

7.84

7.84

11.44

11.44

11.44

18.33

18.33

18.33

32.17

32.17

32.17

36.86

36.86

36.86

47.78

47.78

METRIC PVC TANK CONNECTOR AS3

CODE SIZE PVC-U £3/4" x 16 x 1/2" R AS3.016B 1" x 20 x 3/4" R AS3.020C 11/4" x 25 x 1" R AS3.025D 11/2" x 32 x 1" R AS3.032D 2" x 40 x 11/2" R AS3.040F

26.63

35.21

40.15

50.92

75.23

ADAPTOR PLAIN SPIGOT/ AF3BSP THREADED FEMALE


22 www.astore.co.uk

HOSE ADAPTOR PO3BSP THREADED/METRIC

CODE SIZE PVC-U £3/8" x 16 R PO3.016A 1/2" x 20 R PO3.020B 3/4" x 25 R PO3.025C 1" x 32 R PO3.032D 11/4" x 40 R PO3.040E 11/2" x 50 R PO3.050F 2" x 63 R PO3.063G

UNION PLAIN / MALE BSP BM3

CODE SIZE PVC-U £50 x 11/2" R BM3.050F 50 x 2" R BM3.050G 63 x 2" R BM3.063G


13.76

13.88

14.83

4.68

4.88

6.47

7.72

11.24

13.47

20.77

ADAPTOR MM3PLAIN/THREADED WITH METAL REINFORCING RING

CODE SIZE PVC-U £16 x 3/8" R MM3.016A 20 x 1/2" R MM3.020B 25 x 3/4" R MM3.025C 32 x 1" R MM3.032D 40 x 11/4" R MM3.040E 50 x 11/2" R MM3.050F 63 x 2" R MM3.063G

ADAPTOR GM3PLAIN/THREADED WITH METAL REINFORCING RING

CODE SIZE PVC-U £16 x 3/8" R GM3.016A 20 x 1/2" R GM3.020B 25 x 3/4" R GM3.025C 32 x 1" R GM3.032D 40 x 11/4" R GM3.040E 50 x 11/2" R GM3.050F 63 x 2" R GM3.063G

ADAPTOR TM3PLAIN/THREADED WITH METAL REINFORCING RING

CODE SIZE PVC-U £16 x 3/8" R TM3.016A 20 x 1/2" R TM3.020B 25 x 3/4" R TM3.025C 32 x 1" R TM3.032D 40 x 11/4" R TM3.040E 50 x 11/2" R TM3.050F 63 x 2" R TM3.063G

4.35

5.39

6.15

8.06

10.08

14.83

17.91

5.31

6.58

6.78

8.06

13.34

15.99

24.15

4.96

7.00

8.06

10.28

17.50

22.24

25.95

ADAPTOR RM3PLAIN/THREADED WITH METAL REINFORCING RING

CODE SIZE PVC-U £20 x 1/2" R RM3.020B 25 x 1/2" R RM3.025B 25 x 3/4" R RM3.025C 32 x 3/4" R RM3.032C 32 x 1" R RM3.032D 40 x 1" R RM3.040D 40 x 11/4" R RM3.040E 50 x 11/2" R RM3.050F 50 x 2" R RM3.050G 63 x 2" R RM3.063G

4.96

5.31

5.71

7.00

7.00

7.32

7.32

9.12

13.04

16.72

COMPOSITE UNION MB3PVC MALE BSP BRASS

CODE SIZE BSP MALE £20 x 1/2" R MB3.020B25 x 3/4" R MB3.025C32 x 1" R MB3.032D40 x 11/4" R MB3.040E50 x 11/2" R MB3.050F63 x 2" R MB3.063G

13.14

18.72

21.27

29.72

42.57

64.83

COMPOSITE UNION FB3PVC FEMALE BSP BRASS

CODE SIZE BSP FEMALE20 x 1/2" R FB3.020B25 x 3/4" R FB3.025C32 x 1" R FB3.032D40 x 11/4" R FB3.040E50 x 11/2" R FB3.050F63 x 2" R FB3.063G

12.36

18.86

21.68

29.34

40.79

61.89




23

met

ricPV

C-U

www.astore.co.uk

>FITTINGS THREADED

ELBOW 90° THREADED GO2

CODE SIZE PVC-U £3/8" R GO2.0160 1/2" R GO2.0200 3/4" R GO2.0250 1" R GO2.0320 11/4" R GO2.0400 11/2" R GO2.0500 2" R GO2.0630 21/2" R GO2.0750 3" R GO2.0900 4" R GO2.1100

HEXAGON NIPPLE THREADED NI2

CODE SIZE PVC-U £3/8" R NI2.0160 1/2" R NI2.0200 3/4" R NI2.0250 1" R NI2.0320 11/4" R NI2.0400 11/2" R NI2.0500 2" R NI2.0630 21/2" R NI2.0750 3" R NI2.0900 4" R NI2.1100

REDUCING NIPPLE THREADED NR2

CODE SIZE PVC-U £1/2" x 3/8" R NR2.020A3/4" x 1/2" R NR2.025B1" x 3/4" R NR2.032C 11/4" x 1" R NR2.040D 11/2" x 11/4" R NR2.050E 2" x 11/2" R NR2.063F 21/2" x 2" R NR2.075G 3" x 21/2" R NR2.090H 4" x 3" R NR2.110I

REDUCING PIECE FEMALE THREADED/ MG2MALE THREADED

CODE SIZE PVC-U £1/2" x 3/8" R MG2.016B 3/4" x 1/2" R MG2.020C 1" x 3/4" R MG2.025D 11/4" x 1" R MG2.032E 11/2" x 11/4" R MG2.040F 2" x 11/2" R MG2.050G 21/2" x 2" R MG2.063H 3" x 21/2" R MG2.075I 4" x 3" R MG2.090L

END CAP THREADED CA2

CODE SIZE PVC-U £3/8" R CA2.0160 1/2" R CA2.0200 3/4" R CA2.0250 1" R CA2.0320 11/4" R CA2.0400 11/2" R CA2.0500 2" R CA2.0630 21/2" R CA2.0750 3" R CA2.0900 4" R CA2.1100

PLUG THREADED TA2

CODE SIZE PVC-U £3/8" R TA2.0160 1/2" R TA2.0200 3/4" R TA2.0250 1" R TA2.0320 11/4" R TA2.0400 11/2" R TA2.0500 2" R TA2.0630 21/2" R TA2.0750 3" R TA2.0900 4" R TA2.1100

6.25

6.47

6.78

8.37

14.83

17.38

25.74

44.28

67.15

95.97

3.09

3.26

4.13

5.62

7.72

8.37

10.58

22.67

32.52

46.20

3.09

4.68

6.25

7.53

9.33

14.73

23.61

29.34

47.34

5.39

6.15

7.32

9.95

11.55

14.19

30.50

38.97

67.79

3.09

3.92

4.56

5.62

7.66

9.51

10.28

22.33

31.34

57.75

5.19

6.78

7.72

8.14

8.50

11.24

14.08

36.23

48.07

54.87

SOCKET THREADED MA2

CODE SIZE PVC-U £3/8" R MA2.0160 1/2" R MA2.0200 3/4" R MA2.0250 1" R MA2.0320 11/4" R MA2.0400 11/2" R MA2.0500 2" R MA2.0630 21/2" R MA2.0750 3" R MA2.0900 4" R MA2.1100

TEE THREADED TI2

CODE SIZE PVC-U £3/8" R TI2.0160 1/2" R TI2.0200 3/4" R TI2.0250 1" R TI2.0320 11/4" R TI2.0400 11/2" R TI2.0500 2" R TI2.0630 21/2" R TI2.0750 3" R TI2.0900 4" R TI2.1100

6.47

6.78

7.66

9.12

12.50

14.42

17.68

38.13

48.82

86.12

4.68

5.53

7.11

9.51

17.06

22.14

37.20

63.32

90.86

151.47


24 www.astore.co.uk

REDUCING PIECE FEMALE THREADED MR2 CODE SIZE PVC-U £1/2" x 3/8" R MR2.020A 3/4" x 1/2" R MR2.025B 1" x 3/4" R MR2.032C 11/4" x 1" R MR2.040D 11/2" x 11/4" R MR2.050E 2" x 11/2" R MR2.063F 21/2" x 2" R MR2.075G 3" x 21/2" R MR2.090H 4" x 3" R MR2.110I

ELBOW 45° THREADED GY2

CODE SIZE PVC-U £3/8" R GY2.0160 1/2" R GY2.0200 3/4" R GY2.0250 1" R GY2.0320 11/4" R GY2.0400 11/2" R GY2.0500 2" R GY2.0630 21/2" R GY2.0750 3" R GY2.0900 4" R GY2.1100

BARREL NIPPLE THREADED/THREADED BA2 CODE SIZE PVC-U £3/8" R BA2.0160 1/2" R BA2.0200 3/4" R BA2.0250 1" R BA2.0320 11/4" R BA2.0400 11/2" R BA2.0500 2" R BA2.0630 21/2" R BA2.0750 3" R BA2.0900 4" R BA2.1100

REDUCING PIECE MALE THREADED/FEMALE THREADED RI2

CODE SIZE PVC-U £1/2" x 3/8" R RI2.020A 3/4" x 1/2" R RI2.025B 1" x 1/2" R RI2.032B 1" x 3/4" R RI2.032C 11/4" x 1/2" R RI2.040B 11/4" x 3/4" R RI2.040C 11/4" x 1" R RI2.040D 11/2" x 3/4" R RI2.050C 11/2" x 1" R RI2.050D 11/2" x 11/4" R RI2.050E 2" x 1" R RI2.063D 2" x 11/4" R RI2.063E 2" x 11/2" R RI2.063F 21/2" x 11/4" R RI2.075E 21/2" x 11/2" R RI2.075F 21/2" x 2" R RI2.075G 3" x 11/2" R RI2.090F 3" x 2" R RI2.090G 3" x 21/2" R RI2.090H 4" x 2" R RI2.110G 4" x 21/2" R RI2.110H 4" x 3" R RI2.110I

>FITTINGS THREADED

5.39

6.15

7.32

9.95

11.55

14.19

30.50

38.97

67.79

3.09

4.68

6.25

6.25

7.66

7.66

7.66

9.22

9.22

9.22

14.73

14.73

14.73

23.61

23.61

23.61

29.34

29.34

29.34

47.34

47.34

47.34

3.72

3.92

4.44

5.93

7.95

8.37

11.12

24.99

28.70

38.77

5.53

6.03

6.47

8.69

13.24

17.59

26.06

43.10

63.64

70.33

BACK NUT THREADED NU2

CODE SIZE PVC-U £1/2" R NU2.0200 3/4" R NU2.0250 1" R NU2.0320 11/4" R NU2.0400 11/2" R NU2.0500 2" R NU2.0630 21/2" R NU2.0750 3" R NU2.090N 4" R NU2.110N

2.65

2.86

4.96

11.03

11.97

12.93

18.99

21.27

26.79

UNION THREADED BO2

CODE SIZE PVC-U £3/8" R BO2.0160 1/2" R BO2.0200 3/4" R BO2.0250 1" R BO2.0320 11/4" R BO2.0400 11/2" R BO2.0500 2" R BO2.0630 21/2" R BO2.0750 3" R BO2.0900 4" R BO2.1100

12.82

14.83

16.10

22.98

28.27

39.73

55.92

88.54

128.48

173.82



25

met

ricPV

C-U

www.astore.co.uk

LOOSE FLANGE DRILLED BS 4504 PN16 FL1

SIZE CODE £20 R FL1.0200 25 R FL1.0250 32 R FL1.0320 40 R FL1.0400 50 R FL1.0500 63 R FL1.0630 75 R FL1.0750 90 R FL1.0900 110 R FL1.1100 125 R FL1.1250 140 R FL1.1400 160 R FL1.1600 200* R FL1.2000 225 R FL1.225N 250* R FL1.2500 280* R FL1.2800 315* R FL1.3150*NP10 drilling

STUB FLANGE SERRATED FACE* QR1

SIZE CODE £20 R QR1.0200 25 R QR1.0250 32 R QR1.0320 40 R QR1.0400 50 R QR1.0500 63 R QR1.0630 75 R QR1.0750 90 R QR1.0900 110 R QR1.1100 125 R QR1.1250 140 R QR1.1400 160 R QR1.1600 200 R QR1.2000 225 R QR1.2250 250 R QR1.2500 280 R QR1.2800 315 R QR1.3150

BLANK FLANGE DRILLED BS 4504 PN16 FC1

SIZE CODE £20 R FC1.0200 25 R FC1.0250 32 R FC1.0320 40 R FC1.0400 50 R FC1.0500 63 R FC1.0630 75 R FC1.0750 90 R FC1.0900 110 R FC1.1100 160 R FC1.1600

FULL FACE FLANGE FF1PLAIN/DRILLED BS 4504 PN10/16

SIZE CODE £20 R FF1.0200 25 R FF1.0250 32 R FF1.0320 40 R FF1.0400 50 R FF1.0500 63 R FF1.0630 75 R FF1.0750 90 R FF1.0900 110 R FF1.1100

>FLANGES

8.79

9.12

9.84

12.63

15.38

21.83

31.13

33.15

42.45

47.25

59.31

70.55

73.09

89.55

116.09

194.16

281.76

1.79

2.01

2.54

3.92

5.93

10.49

17.49

19.60

27.42

54.13

63.87

64.84

76.04

150.63

171.07

180.15

247.45

27.55

31.13

34.01

36.23

38.77

43.23

64.28

76.67

98.40

172.98

10.28

10.49

11.24

13.34

15.66

19.89

32.94

37.07

51.39


GASKET FULL FACE GF1DRILLED PN16

SIZE CODE £20 E GFN.0200 25 E GFN.0250 32 E GFN.0320 40 E GFN.0400 50 E GFN.0500 63 E GFN.0630 75 E GFN.0750 90 E GFN.0900 110 E GFN.1100

2.86

2.97

3.45

4.01

5.53

6.03

7.51

8.37

12.21


GASKET STUB FLANGE GQPFOR QR1 STUBS

SIZE CODE £20 E GQP.0200 25 E GQP.0250 32 E GQP.0320 40 E GQP.0400 50 E GQP.0500 63 E GQP.0630 75 E GQP.0750 90 E GQP.0900 110 E GQP.1100 125 E GQP.1250 140 E GQP.1400 160 E GQP.1600 200 E GQP.2000 225 E GQP.2250 250 E GQP.2500

1.47

1.79

2.43

2.86

2.97

3.09

3.26

3.72

5.31

6.90

7.66

7.72

9.78

16.10

16.85


BACKING RING BR1GALVANISED MILD STEEL DRILLED PN16

SIZE CODE £20 G BR1.0200 25 G BR1.0250 32 G BR1.0320 40 G BR1.0400 50 G BR1.0500 63 G BR1.0630 75 G BR1.0750 90 G BR1.0900 110 G BR1.1100 160 G BR1.1600

9.51

9.84

10.99

11.24

13.88

19.60

26.91

29.78

38.55

63.56



26 www.astore.co.uk


>PIPE BRACKETS >ACCESSORIES

PIPE BRACKET ST4

SIZE CODE £16 P ST1.0160 20 P ST1.0200 25 P ST1.0250 32 P ST1.0320

PIPE BRACKET WITH STRAP ST4

SIZE CODE £40 P ST1.040050 P ST1.050063 P ST1.063075 P ST1.075090 P ST1.0900110 P ST1.1100

1.47

1.58

1.92

2.13

2.75

3.09

3.92

5.71

7.11

12.50

ASTORE ECO CLEANER (ABS/ PVC-U) CFO

SIZE CODE £1/2 litre M CFO.0200

PVC-U SOLVENT CEMENT PCOSIZE CODE £1/2 litre R PCO.0200 25.74

12.21

CHEMICALLY RESISTANT PVC-U CEMENT PCO

SIZE CODE £1 litre R PCO.0100 65.76

CHEMICALLY RESISTANT CLEANER CFO






RH PVC-U SOLVENT CEMENT (THF FREE) PCO



>TOOLS

PIPE CUTTER

203.09

479.66

12.96

27.29

SIZE CODE £16-63mm T TFO.0100 50-125mm T TFO.0101 16-63mm spare cutter wheel T TFO.0102 50-125mm spare cutter wheel T TF0.0103

CHAMFERRING TOOLS

80.41

531.85

SIZE CODE £16-63mm chamferring tool C AFO.0100

32-160mm chamferring tool C AFO.0101

FIBRE SEAL(SEALING TAPE FOR THREADED CONNECTIONS)

8.40

SIZE CODE £Fibre seal tape F AFO.0100

NEW

NEW


27

met

ricPV

C-U

VALV

ES

www.astore.co.uk

>VALVES INDUSTRIAL

IMPERIAL DOUBLE UNION BALL VALVE 724EPLAIN WITH EPDM SEALS

CODE CODE SIZE PVC-U £ ABS £1/2" I 724.0200 S 724.0200 3/4" I 724.0250 S 724.0250 1" I 724.0320 S 724.0320 11/4" I 724.0400 S 724.0400 11/2" I 724.0500 S 724.0500 2" I 724.0630 S 724.0630 21/2" I 724.0750 S 724.0750 3" I 724.0900 S 724.0900 4" I 724.1100 S 724.1100

CODE CODE SIZE PVC-U £ ABS £1/2" I 724.020F S 724.020F 3/4" I 724.025F S 724.025F 1" I 724.032F S 724.032F 11/4" I 724.040F S 724.040F 11/2" I 724.050F S 724.050F 2" I 724.063F S 724.063F 21/2" I 724.075F S 724.075F 3" I 724.090F S 724.090F 4" I 724.110F S 724.110F

52.44

61.74

75.11

94.45

123.93

155.21

414.05

463.63

663.60

49.36

64.40

78.69

100.93

129.45

161.75

424.50

525.68

700.56

THREADED DOUBLE UNION BALL VALVE 724EPLAIN WITH EPDM SEALS

CODE CODE SIZE PVC-U £ ABS £3/8" T 724.0160 - 1/2" T 724.0200 S 725.0200 3/4" T 724.0250 S 725.0250 1" T 724.0320 S 725.0320 11/4" T 724.0400 S 725.0400 11/2" T 724.0500 S 725.0500 2" T 724.0630 S 725.063021/2" T 724.0750 - 3" T 724.0900 - 4" T 724.1100 -

47.92

47.92

56.56

69.80

89.19

116.09

147.21

387.47

410.66

604.49

50.10

61.08

71.99

96.33

125.38

148.20

METRIC DOUBLE UNION BALL VALVE 724FPLAIN WITH FPM SEALS

CODE SIZE PVC-U £16 M 724.016F 20 M 724.020F 25 M 724.025F 32 M 724.032F 40 M 724.040F 50 M 724.050F 63 M 724.063F 75 M 724.075F 90 M 724.090F 110 M 724.110F

52.44

52.44

61.74

75.11

94.60

123.93

155.21

414.05

463.63

663.60

METRIC DOUBLE UNION BALL VALVE 724EPLAIN WITH EPDM SEALS

CODE SIZE PVC-U £16 M 724.0160 20 M 724.0200 25 M 724.0250 32 M 724.0320 40 M 724.0400 50 M 724.0500 63 M 724.0630 75 M 724.0750 90 M 724.0900 110 M 724.1100

43.74

43.74

51.39

62.48

80.73

103.29

129.45

344.98

386.39

577.05

CODE SIZE PVC-U £3/8" T 724.016F 1/2" T 724.020F 3/4" T 724.025F 1" T 724.032F 11/4" T 724.040F 11/2" T 724.050F 2" T 724.063F 21/2" T 724.075F 3" T 724.090F 4" T 724.110F

57.52

57.52

68.01

83.92

107.08

139.40

176.69

465.00

492.86

643.77

43.74

51.39

62.48

80.73

103.29

129.45

344.98

386.39

577.05

45.54

53.60

65.45

84.11

107.72

134.72

359.51

438.10

608.95

IMPERIAL DOUBLE UNION BALL VALVE 724FPLAIN WITH FPM SEALS

THREADED DOUBLE UNION BALL VALVE 724FPLAIN WITH FPM SEALS


28 www.astore.co.uk

>VALVES INDUSTRIAL

3-WAY VALVES M930METRIC

CODE SIZE PVC-U £20 M 930.020025 M 930.025032 M 930.0320 40 M 930.0400 50 M 930.0500 63 M 930.0630

93.39

107.51

132.42

148.77

181.80

235.54

3-WAY VALVES I930INCH PLAIN

CODE SIZE PVC-U £1/2" I 930.02003/4" I 930.02501" I 930.0320 11/4" I 930.0400 11/2" I 930.05002" I 930.0630

93.39

107.51

132.42

148.77

181.80

235.54

3-WAY VALVES T931BSP THREADED

CODE SIZE PVC-U £1/2" T 931.02003/4" T 931.02501" T 931.0320 11/4" T 931.0400 11/2" T 931.0500 2" T 931.0630

101.65

118.52

146.12

163.86

205.56

260.10

>VALVES ECONOMY

THREADED DOUBLE UNION BALL VALVE 321EWITH EPDM SEALS

CODE SIZE PVC-U £1/2" T 321.0200 3/4" T 321.0250 1" T 321.0320 11/4" T 321.0400 11/2" T 321.0500 2" T 321.0630 21/2" T 321.0750 3" T 321.0900 4" T 321.1100

23.84

25.95

39.92

48.21

60.27

89.38

271.48

284.63

542.24

IMPERIAL DOUBLE UNION BALL VALVE 322EPLAIN WITH EPDM SEALS

CODE SIZE PVC-U £1/2" I 322.0200 3/4" I 322.0250 1" I 322.0320 11/4" I 322.0400 11/2" I 322.0500 2" I 322.0630 21/2" I 322.0750 3" I 322.0900 4" I 322.1100

19.29

24.26

37.40

44.81

55.50

84.52

256.11

271.17

510.03

METRIC DOUBLE UNION BALL VALVE 322EPLAIN WITH EPDM SEALS

CODE SIZE PVC-U £20 M 322.0200 25 M 322.0250 32 M 322.0320 40 M 322.0400 50 M 322.0500 63 M 322.0630 75 M 322.0750 90 M 322.0900 110 M 322.1100

19.29

24.26

37.40

44.81

55.50

84.52

256.11

271.17

510.03

BUTTERFLY VALVE M800EPDM SEALS

CODE SIZE PVC-U £50/11/2" M 800.050063/2" M 800.063075/21/2" M 800.0750 90/3" M 800.0900 110/4" M 800.1100 140/5" M 800.1400 160/6" M 800.1600 225/8" M 800.2250 280/10" M 800.2800 315/12" M 800.3150

171.59

182.20

192.76

192.76

232.86

303.51

372.21

571.26

2,436.22

2,584.48

Butterfly Valve fixing lugs available on request.

SINGLE UNION BALL VALVE COMPRESSION 305ETO FEMALE THREADED WITH EPDM SEALSMTO CODE

SIZE PVC-U £3/8" T 305.016A 1/2" T 305.020B 3/4" T 305.025C 1" T 305.032D 11/4" T 305.040E 11/2" T 305.050F 2" T 305.063G

21.7923.5326.0631.9845.1353.3671.80

PVC BALL VALVE WITH PE SPIGOT ENDS 326EMTO

CODE SIZE PVC-U £20 M 326.0200 25 M 326.0250 32 M 326.0320 40 M 326.0400 50 M 326.0500 63 M 326.0630

POAPOAPOAPOAPOAPOA

DOUBLE UNION PVC BALL VALVE 334EWITH COMPRESSION ENDSMTO

CODE SIZE PVC-U £20 M 334.0200 25 M 334.0250 32 M 334.0320

43.8946.3450.72

SINGLE UNION PVC BALL VALVE 335EWITH COMPRESSION ENDSMTO CODE

SIZE PVC-U £20 M 335.0200 25 M 335.0250 32 M.335 0320

25.7829.8930.77

>VALVES ECONOMY



29

VALV

ES

www.astore.co.uk

IMPERIAL DOUBLE UNION BALL NON RETURN PLAIN WITH EPDM SEALS 21NE

CODE SIZE PVC-U £3/8" I 21N.0160 1/2" I 21N.0200 3/4" I 21N.0250 1" I 21N.0320 11/4" I 21N.0400 11/2" I 21N.0500 2" I 21N.0630

THREADED DOUBLE UNION BALL NON RETURN WITH EPDM SEALS 22NE

CODE SIZE PVC-U £3/8" T 22N.0160 1/2" T 22N.0200 3/4" T 22N.0250 1" T 22N.0320 11/4" T 22N.0400 11/2" T 22N.0500 2" T 22N.0630

IMPERIAL DOUBLE UNION SPRING CHECK VALVES PLAIN WITH EPDM SEALS 230

CODE SIZE PVC-U £1/2" I 230.0200 3/4 I 230.02501" I 230.0320 11/4" I 230.0400 11/2" I 230.0500 2" I 230.0630

FOOT VALVE FILTER FLT

CODE SIZE PVC-U £3/4" T FLT.0250 1" T FLT.0320 11/4" T FLT.0400 11/2" T FLT.0500 2" T FLT.0630

>VALVES NON RETURN

46.4146.8353.5057.6269.2685.16109.09

53.7953.7961.6566.5379.8798.29140.24

METRIC SOLVENT DOUBLE UNION AIR RELEASEVALVE - PLAIN WITH EPDM SEALS 21AE

CODE SIZE PVC-U £16 M 21A.0160 20 M 21A.0200 25 M 21A.0250 32 M 21A.032040 M 21A.0400 50 M 21A.0500 63 M 21A.0630

65.4871.2999.78118.18138.24158.81186.67

THREADED DOUBLE UNION AIR RELEASE VALVE PLAIN WITH EPDM SEALS 22AE

CODE SIZE PVC-U £3/8" T 22A.0160 1/2" T 22A.0200 3/4" T 22A.0250 1" T 22A.0320 11/4" T 22A.0400 11/2" T 22A.0500 2" T 22A.0630

70.6277.38101.89124.39146.78168.42201.72

IMPERIAL SOLVENT DOUBLE UNION AIR RELEASEVALVE - PLAIN WITH EPDM SEALS 21AE

CODE SIZE PVC-U £3/8" I 21A.0160 1/2" I 21A.0200 3/4" I 21A.0250 1" I 21A.0320 11/4" I 21A.0400 11/2" I 21A.0500 2" I 21A.0630

65.4871.2999.78118.18138.24158.81186.67

65.68

73.09

80.08

98.51

120.75

172.86

THREADED DOUBLE UNION SPRING CHECK VALVES PLAIN WITH EPDM SEALS 230

METRIC DOUBLE UNION SPRING CHECK VALVES BSP WITH EPDM SEALS 230

CODE SIZE PVC-U £20 M 230.020025 M 230.025032 M 230.0320 40 M 230.0400 50 M 230.0500 63 M 230.0630

65.68

73.09

80.08

98.51

120.75

172.86

6.78

6.78

7.00

11.44

12.27

WAFER CHECK VALVE CLPEPDM SEALS

CODE SIZE PVC-U £50/11/2" M CLP.0500 63/2" M CLP.0630 75/21/2" M CLP.0750 90/3" M CLP.0900 110/4" M CLP.1100 140/5" M CLP.1400 160/6" M CLP.1600 225/8" M.CLP.2250 280/10" M CLP.2800 315/12" M CLP.3150

84.75

102.73

113.02

133.60

163.48

187.16

229.42

270.50

411.09

615.45

METRIC DOUBLE UNION NON RETURN VALVE PLAIN WITH EPDM SEALS 21NE

CODESIZE PVC-U £16 M 21N.0160 20 M 21N.0200 25 M 21N.0250 32 M 21N.0320 40 M 21N.0400 50 M 21N.0500 63 M 21N.0630

46.8346.8353.5057.6269.2685.16109.09

*FPM seals are available upon request.

CODE SIZE PVC-U £1/2" T 230.02003/4 T 230.02501" T 230.0320 11/4" T 230.0400 11/2" T 230.0500 2" T 230.0630

65.68

73.09

80.08

98.51

120.75

172.86


30 www.astore.co.uk

>VALVES ACTUATED

PNEUMATICALLY ACTUATED BALL VALVEPVC-U SPRING RETURN WITH EPDM SEALS

Operation / Actuation Material Series Size

Electric Actuation

1 = 100-240vAC2 = 24v AC/DC

Pneumatic Actuation

P = Pneu, Fail Safe ClosedQ = Pneu, Fail Safe OpenR = Pneu, Double acting

I = ImperialM = MetricT - ThreadedB - Butterfly valve

A = ABSP = PVC-U

0200 = 20mm / 1/2"0250 = 25mm / 3/4"0320 = 32mm / 1"0400 = 40mm / 11/4"0500 = 50mm / 11/2"0630 = 63mm / 2"

Note: final 0 is replaced with F for FPM otherwise it is EPDM

SIZEPVC-U FailSafe Open

PVC-U FailSafe Close £

1/2" AQPI0200 APPI0200 377.463/4" AQPI0250 APPI0250 385.28

1" AQPI0320 APPI0320 393.06

11/4" AQPI0400 APPI0400 455.24

11/2" AQPI0500 APPI0500 472.72

2" AQPI0630 APPI0630 551.52



20mm AQPM0200 APPM0200 377.46

25mm AQPM0250 APPM0250 385.28

32mm AQPM0320 APPM0320 393.06

40mm AQPM0400 APPM0400 455.24

50mm AQPM0500 APPM0500 472.72

63mm AQPM0630 APPM0630 551.52

PNEUMATICALLY ACTUATED BALL VALVEABS SPRING RETURN WITH EPDM SEALS

SIZEABSSafe Open

ABSSafe Close £

1/2" AQAI0200 APAI0200 565.733/4" AQAI0250 APAI0250 573.92

1" AQAI0320 APAI0320 582.52

11/4" AQAI0400 APAI0400 765.46

11/2" AQAI0500 APAI0500 783.98

2" AQAI0630 APAI0630 805.07

SIZEABSSafe Open

ABSSafe Close £

20mm AQAM0200 APAM0200 565.73

25mm AQAM0250 APAM0250 573.92

32mm AQAM0320 APAM0320 582.52

40mm AQAM0400 APAM0400 765.46

50mm AQAM0500 APAM0500 783.98

63mm AQAM0630 APAM0630 805.07

PNEUMATICALLY ACTUATED BALL VALVEPVC DOUBLE ACTING WITH EPDM SEALS

SIZEPVC-U Double Acting £

1/2" ARPI0200 305.053/4" ARPI0250 312.90

1" ARPI0320 385.30

11/4" ARPI0400 399.88

11/2" ARPI0500 417.27

2" ARPI0630 476.68


20mm ARPM0200 305.05

25mm ARPM0250 312.90

32mm ARPM0320 385.30

40mm ARPM0400 399.88

50mm ARPM0500 417.27

63mm ARPM0630 476.68

SIZEABSDouble Acting £

1/2" ARAI0200 493.323/4" ARAI0250 501.54

1" ARAI0320 574.76

11/4" ARAI0400 710.10

11/2" ARAI0500 728.53

2" ARAI0630 730.23

SIZEABSDouble Acting £

20mm ARAM0200 493.32

25mm ARAM0250 501.54

32mm ARAM0320 574.76

40mm ARAM0400 710.10

50mm ARAM0500 728.53

63mm ARAM0630 730.23

PNEUMATICALLY ACTUATED BALL VALVEABS DOUBLE ACTING WITH EPDM SEALS

ACTUATED VALVE CODE GENERATING GUIDE (All Actuated valve codes are prefixed with "A")

AQP/APP

ARP

AQA/APA

ARA


31

VALV

ES

www.astore.co.uk

>VALVES ACTUATED

ELECTRICALLY ACTUATED BALL VALVE PVC EPDM SEALS

SIZE 110V/220V AC 24V DC £

1/2" A1PI0200 A2PI0200 563.933/4" A1PI0250 A2PI0250 571.71

1" A1PI0320 A2PI0320 579.55

11/4" A1PI0400 A2PI0400 762.08

11/2" A1PI0500 A2PI0500 779.55

2" A1PI0630 A2PI0630 799.80


20mm A1PM0200 A2PM0200 563.93

25mm A1PM0250 A2PM0250 571.71

32mm A1PM0320 A2PM0320 579.55

40mm A1PM0400 A2PM0400 762.08

50mm A1PM0500 A2PM0500 779.55

63mm A1PM0630 A2PM0630 799.80

VALVE ACTUATOR KIT

SIZE(DN)

CODE Mounting £

DN15 HZMK1102 F04 46.16

DN20 HZMK1103 F04 48.97

DN32 HZMK1104 F04 48.97

DN15 HZMK2102 F05 46.16

DN20 HZMK2103 F05 48.97

DN32 HZMK2104 F05 48.97

DN40 HZMK2105 F05 55.97

DN50 HZMK2106 F05 55.97

DN63 HZMK2107 F05 59.46

DN50 HZMK3106 F07 67.95

DN63 HZMK3107 F07 POA

ELECTRICALLY ACTUATED BALL VALVE ABS EPDM SEALS


1/2" A1AI0200 A2AI0200 565.733/4" A1AI0250 A2AI0250 573.92

1" A1AI0320 A2AI0320 582.52

11/4" A1AI0400 A2AI0400 765.46

11/2" A1AI0500 A2AI0500 783.98

2" A1AI0630 A2AI0630 805.07


20mm A1AM0200 A2AM0200 565.73

25mm A1AM0250 A2AM0250 573.92

32mm A1AM0320 A2AM0320 582.52

40mm A1AM0400 A2AM0400 765.46

50mm A1AM0500 A2AM0500 783.98

63mm A1AM0630 A2AM0630 805.07

PNEUMATICALLY ACTUATEDBUTTERFLY VALVE PVC SPRINGRETURN WITH EPDM SEALS



75/21/2" AQPB0750 APPB0750 410.00

90/3" AQPB0900 APPB0900 460.75

110/4" AQPB1100 APPB1100 550.77

140/5" AQPB1400 APPB1400 780.56

160/6" AQPB1600 APPB1600 1004.78

225/8" AQPB2250 APPB2250 1307.76

PNEUMATICALLY ACTUATEDBUTTERFLY VALVE PVC DOUBLEACTING WITH EPDM SEALS


75/21/2" ARPB0750 APPB0750 343.70

90/3" ARPB0900 APPB0900 385.92

110/4" ARPB1100 APPB1100 435.12

140/5" ARPB1400 APPB1400 547.67

160/6" ARPB1600 APPB1600 598.49

225/8" ARPB2250 APPB2250 1040.86

AQP/APP ARP/APP

A1A/A2AA1P/A2P

MK

NOTE: Kit includes; mounting plate, mountinglegs, drive shaft, 4 x screws, 1 x mountingscrew & 6 x washers


32 www.astore.co.uk

StandardsAstore Compression Fittings are tested in accordance with ISO 3501 - ISO 3503 - ISO 3459 - ISO 3458 - DIN 8076 - Uniplast 403 - BS 5114 1975 - UNI 9561 - UNI 9562.

The Astore Compression Fitting has gained various international approvals.

Materials

Body Nut - Polypropylene (PP)

Clinching Ring - Polyacetal Resin (POM)

O-Ring - Nitrile Rubber (NBR)

Reinforcing Ring - Stainless Steel

Applications

Compression Fittings are designed for use with MDPE and HDPE pipework systems.

Clamp Saddles are designed for use with: PE Pipe

PVC-U Pipe

PP Pipe

Pressure Ratings

Compression Fittings 16bar

Clamp Saddles 503 - Pressure rating at 20°C: 6bar 505 and 508 - Pressure rating at 20°C: 10bar up to D160mm, 6bar up to D200mm, 4bar up to D315mm

>CLAMP SADDLES & COMPRESSION FITTINGS


33www.astore.co.uk

CLAMP SADDLE WITH TWO BOLTS 505

D x G CODE BOX QTY £20 x 1/2" P.505.020B 15025 x 1/2" P.505.025B 12025 x 3/4" P.505.025C 12032 x 1/2" P.505.032B 10032 x 3/4" P.505.032C 10032 x 1" P.505.032D 6040 x 1/2" P.505.040B 6040 x 3/4" P.505.040C 6040 x 1" P.505.040D 6050 x 1/2" P.505.050B 5050 x 3/4" P.505.050C 5050 x 1" P.505.050D 50

DOUBLE CLAMP SADDLE WITH TWO BOLTS 508

D x G x G CODE BOX QTY £20 x 1/2" x 1/2" P.508.020B 160 25 x 1/2" x 1/2" P.508.025B 120 25 x 3/4" x 3/4" P.508.025C 120 32 x 1/2" x 1/2" P.508.032B 80 32 x 3/4" x 3/4" P.508.032C 80 32 x 1" x 1" P.508.032D 60 40 x 1/2" x 1/2" P.508.040B 60 40 x 3/4" x 3/4" P.508.040C 60 40 x 1" x 1" P.508.040D 60 50 x 1/2" x 1/2" P.508.050B 50 50 x 3/4" x 3/4" P.508.050C 50 50 x 1" x 1" P.508.050D 50

DOUBLE CLAMP SADDLE WITH FOUR BOLTS 508

D x G x G CODE BOX QTY £63 x 1/2" x 1/2" P.508.063B 60 63 x 3/4" x 3/4" P.508.063C 60 63 x 1" x 1" P.508.063D 60 63 x 11/4" x 11/4" P.508.063E 60 63 x 11/2" x 11/2" P.508.063F 60 75 x 1/2" x 1/2" P.508.075B 40 75 x 3/4" x 3/4" P.508.075C 40 75 x 1" x 1" P.508.075D 40 75 x 11/4” x 11/4" P.508.075E 40 75 x 11/2" x 11/2" P.508.075F 40 75 x 2" x 2" P.508.075G 30 90 x 1/2" x 1/2" P.508.090B 25 90 x 3/4" x 3/4" P.508.090C 25 90 x 1" x 1" P.508.090D 25 90 x 11/4" x 11/4" P.508.090E 25 90 x 11/2" x 11/2" P.508.090F 25 90 x 2" x 2" P.508.090G 25 110 x 1/2" x 1/2" P.508.110B 15 110 x 3/4" x 3/4" P.508.110C 15 110 x 1" x 1" P.508.110D 15 110 x 11/4" x 11/4" P.508.110E 15 110 x 11/2" x 11/2" P.508.110F 15 110 x 2" x 2" P.508.110G 15 125 x 3/4" x 3/4" P.508.125C 15 125 x 1" x 1" P.508.125D 15 125 x 11/4" x 11/4" P.508.125E 15 125 x 11/2" x 11/2" P.508.125F 15 125 x 2" x 2" P.508.125G 15

CLAMP SADDLE WITH FOUR BOLTS 505

D x G CODE BOX QTY £63 x 1/2" P.505.063B 75 63 x 3/4" P.505.063C 75 63 x 1" P.505.063D 75 63 x 11/4" P.505.063E 70 63 x 11/2" P.505.063F 70 75 x 1/2" P.505.075B 50 75 x 3/4" P.505.075C 50 75 x 1" P.505.075D 50 75 x 11/4" P.505.075E 45 75 x 11/2" P.505.075F 45 75 x 2" P.505.075G 45 90 x 1/2" P.505.090B 40 90 x 3/4" P.505.090C 40 90 x 1" P.505.090D 40 90 x 11/4" P.505.090E 35 90 x 11/2" P.505.090F 35 90 x 2" P.505.090G 35 110 x 1/2" P.505.110B 25 110 x 3/4" P.505.110C 25 110 x 1" P.505.110D 25 110 x 11/4" P.505.110E 25 110 x 11/2" P.505.110F 25 110 x 2" P.505.110G 25 125 x 3/4" P.505.125C 30 125 x 1" P.505.125D 30 125 x 11/4" P.505.125E 30 125 x 11/2" P.505.125F 30 125 x 2" P.505.125G 30

>CLAMP SADDLES WITH STAINLESS STEEL REINFORCING RING

4.68

5.31

5.31

5.83

5.83

5.83

7.00

7.00

7.00

7.95

7.95

7.95

6.58

7.11

7.11

8.79

8.79

8.79

10.49

10.49

10.49

11.24

11.24

11.24

13.75

13.76

13.76

13.76

13.76

15.66

15.66

15.66

15.66

15.66

15.66

18.98

18.99

18.99

18.99

18.99

18.99

24.92

24.90

24.92

24.92

24.92

24.92

32.82

32.82

32.82

32.82

32.82

9.51

9.51

9.51

9.51

9.51

10.49

10.49

10.49

10.49

10.49

10.49

15.88

15.88

15.88

15.88

15.88

15.88

16.52

16.52

16.52

16.52

16.52

16.52

22.24

22.24

22.24

22.24

22.24


All Clamp Saddles are Made to Order (MTO)

and sold in box qty's (as indicated in data tables).

CLAM

P SA

DDLE

S &

COMP

RESS

ION

FITTIN

GS


34 www.astore.co.uk

CLAMP SADDLE WITH SIX BOLTS 505

D x G CODE BOX QTY £140 x 1" P.505.140D 20 140 x 11/4" P.505.140E 20 140 x 11/2" P.505.140F 20 140 x 2" P.505.140G 20 140 x 21/2" P.505.140H 20 140 x 3" P.505.140I 20 160 x 1" P.505.160D 16 160 x 11/4" P.505.160E 16 160 x 11/2" P.505.160F 16 160 x 2" P.505.160G 16 160 x 3" P.505.160I 15 180 x 11/4" P.505.180E 8 180 x 11/2" P.505.180F 8 180 x 2" P.505.180G 8 180 x 3" P.505.180I 8 180 x 4" P.505.180L 6 200 x 11/4" P.505.200E 8 200 x 11/2" P.505.200F 8 200 x 2" P.505.200G 8 200 x 3" P.505.200I 8 200 x 4" P.505.200L 8 225 x 11/4" P.505.225E 7 225 x 11/2" P.505.225F 7 225 x 2" P.505.225G 7 225 x 3" P.505.225I 7 225 x 4" P.505.225L 7 250 x 11/4" P.505.250E 7 250 x 11/2" P.505.250F 7 250 x 2" P.505.250G 7 250 x 3" P.505.250I 7 250 x 4" P.505.250L 6 280 x 11/4" P.505.280E 3 280 x 11/2" P.505.280F 3 280 x 2" P.505.280G 3 280 x 3" P.505.280I 3 280 x 4" P.505.280L 3 315 x 11/4" P.505.315E 4 315 x 11/2" P.505.315F 4 315 x 2" P.505.315G 4 315 x 3" P.505.315I 4 315 x 4" P.505.315L 4

DOUBLE CLAMP SADDLE WITH SIX BOLTS 508

D x G x G CODE BOX QTY £140 x 11/4" x 11/4" P.508.140E 20140 x 11/2" x 11/2" P.508.140F 20140 x 2" x 2" P.508.140G 20140 x 21/2" x 21/2" P.508.140H 16 140 x 3" x 3" P.508.140I 16 160 x 1" x 1" P.508.160D 12 160 x 11/4" x 11/4" P.508.160E 12 160 x 11/2" x 11/2" P.508.160F 12 160 x 2" x 2" P.508.160G 12160 x 3" x 3" P.508.160I 12160 x 4" x 4" P508160L 12180 x 11/4" x 11/4" P.508.180E 8 180 x 11/2" x 11/2" P.508.180F 8 180 x 2" x 2"” P.508.180G 8180 x 3" x 3" P.508.180I 8180 x 4" x 4" P.508.180L 8 200 x 11/4" x 11/4" P.508.200E 8 200 x 11/2" x 11/2" P.508.200F 8 200 x 2" x 2" P.508.200G 8200 x 3" x 3" P.508.200I 8 225 x 11/4" x 11/4" P.508.225E 6 225 x 11/2" x 11/2" P.508.225F 6 225 x 2" x 2" P.508.225G 6225 x 21/2" x 21/2" P.508.225H 6 225 x 3" x 3" P.508.225I 5 225 x 4" x 4" P.508.225L 4 250 x 11/4" x 11/4" P.508.250E 5 250 x 11/2" x 11/2" P.508.250F 5 250 x 2" x 2" P.508.250G 7250 x 3" x 3" P.508.250I 5 250 x 4" x 4" P.508.250L 4 315 x 11/4" x 11/4" P.508.315E 4 315 x 11/2" x 11/2" P.508.315F 4 315 x 2" x 2" P.508.315G 4315 x 3" x 3" P.508.315I 4315 x 4" x 4" P.508.315L 3

>CLAMP SADDLES WITH STAINLESS STEEL REINFORCING RING

29.55

29.55

29.55

29.55

29.55

29.55

41.31

41.31

41.31

41.31

41.31

54.98

54.98

54.98

54.98

54.98

124.46

124.46

124.46

124.46

124.46

158.90

158.90

158.90

158.90

158.90

180.06

180.06

180.06

180.06

180.06

180.06

180.06

180.06

180.06

180.06

197.00

197.00

197.00

197.00

197.00

42.27

42.27

42.27

42.27

42.27

60.91

60.91

60.91

60.91

60.91

60.91

81.56

81.56

81.56

81.56

81.56

142.72

142.72

142.72

154.72

154.72

168.29

168.29

168.29

168.29

168.29

229.86

229.86

229.86

229.86

229.86

316.94

316.94

316.94

316.94

316.94


All Clamp Saddles are Made to Order (MTO)

and sold in box qty's (as indicated in data tables).


35

CLAM

P SA

DDLE

S &

COMP

RESS

ION

FITTIN

GS

www.astore.co.uk

COUPLING 510

D x D CODE BOX QTY £16 x 16 P.510.0160 36020 x 20 P.510.0200 22025 x 25 P.510.0250 15032 x 32 P.510.0320 10040 x 40 P.510.0400 5050 x 50 P.510.0500 3563 x 63 P.510.0630 2075 x 75 P.510.0750 1590 x 90 P.510.0900 12110 x 110 P.510.1100 6

MALE ADAPTOR 511D x D CODE BOX QTY £16 x 3/8" P.511.016A 50016 x 1/2" P.511.016B 50016 x 3/4" P.511.016C 50020 x 1/2" P.511.020B 40020 x 3/4" P.511.020C 40025 x 1/2" P.511.025B 25025 x 3/4" P.511.025C 25025 x 1" P.511.025D 25032 x 3/4" P.511.032C 15032 x 1" P.511.032D 15032 x 11/4" P.511.032E 15040 x 1" P.511.040D 9040 x 11/4" P.511.040E 9040 x 11/2" P.511.040F 9050 x 11/4" P.511.050E 5550 x 11/2" P.511.050F 5550 x 2" P.511.050G 5563 x 11/2" P.511.063F 3063 x 2" P.511.063G 3063 x 21/2" P.511.063H 3075 x 2" P.511.075G 2575 x 21/2" P.511.075H 2575 x 3" P.511.075I 2590 x 2" P.511.090G 1690 x 21/2" P.511.090H 1690 x 3" P.511.090I 1690 x 4" P.511.090L 16110 x 3" P.511.110I 8110 x 4" P.511.110L 8

ADAPTOR WITH FEMALE THREADING 601

D x G CODE BOX QTY £ 16 x 3/8" P.601.016A 500 16 x 1/2" P.601.016B 500 20 x 1/2" P.601.020B 400 20 x 3/4" P.601.020C 340 25 x 1/2" P.601.025B 250 25 x 3/4" P.601.025C 250 25 x 1" P.601.025D 200 32 x 3/4" P.601.032C 150 32 x 1" P.601.032D 150 40 x 1" P.601.040D 90• 40 x 11/4" P.601.040E 90• 50 x 11/4" P.601.050E 55• 50 x 11/2" P.601.050F 55• 63 x 11/2" P.601.063F 30• 63 x 2" P.601.063G 30• 75 x 2" P.601.075G 25• 75 x 21/2" P.601.075H 25• 90 x 2" P.601.090G 16• 90 x 21/2" P.601.090H 16• 90 x 3" P.601.090I 16• 110 x 3" P.601.110I 8• 110 x 4" P.601.110L 8

•Metal Stiffening Ring on Female Thread

REDUCING COUPLING 512D x D CODE BOX QTY £20 x 16 P.512.020A 26025 x 20 P.512.025B 18032 x 20 P.512.032B 11032 x 25 P.512.032C 11040 x 25 P.512.040C 7040 x 32 P.512.040D 7050 x 25 P.512.050C 4050 x 32 P.512.050D 4050 x 40 P.512.050E 4063 x 32 P.512.063D 2563 x 40 P.512.063E 2563 x 50 P.512.063F 2075 x 50 P.512.075F 1575 x 63 P.512.075G 1590 x 63 P.512.090G 1290 x 75 P.512.090H 12110 x 75 P.512.110H 6110 x 90 P.512.110I 6

90° ELBOW 513D x D CODE BOX QTY £16 x 16 P.513.0160 36020 x 20 P.513.0200 20025 x 25 P.513.0250 15032 x 32 P.513.0320 8040 x 40 P.513.0400 5050 x 50 P.513.0500 3063 x 63 P.513.0630 1575 x 75 P.513.0750 1190 x 90 P.513.0900 8110 x 110 P.513.1100 4

90° ELBOW WITH THREADED MALE OFFTAKE 519D x D CODE BOX QTY £16 x 1/2" P.519.016B 40020 x 1/2" P.519.020B 26020 x 3/4" P.519.020C 26025 x 3/4" P.519.025C 18025 x 1" P.519.025D 18032 x 1" P.519.032D 11032 x 11/4" P.519.032E 11040 x 11/4" P.519.040E 6040 x 11/2" P.519.040F 6050 x 11/2" P.519.050F 3550 x 2” P.519.050G 3563 x 2” P.519.063G 2063 x 21/2" P.519.063H 2075 x 21/2" P.519.075H 1475 x 3” P.519.075I 1490 x 3” P.519.090I 1090 x 4” P.519.090L 10110 x 4” P.519.110L 5

>COMPRESSION FITTINGS

3.84

4.78

5.91

8.25

14.19

18.46

28.10

43.03

56.47

106.66

2.56

2.56

2.56

2.98

2.98

3.53

3.53

3.53

4.37

4.37

4.37

8.37

8.37

8.37

10.93

10.93

10.93

15.62

15.62

15.62

31.23

31.23

31.23

36.90

36.90

36.90

36.90

70.98

70.98

5.39

5.80

7.69

7.69

13.21

13.21

17.06

17.06

17.06

24.14

24.14

24.14

44.03

44.03

58.22

58.22

122.14

122.14

2.40

2.40

3.25

3.25

3.84

3.84

3.84

5.67

5.67

7.69

7.69

11.07

11.07

15.62

15.62

31.23

31.23

38.34

38.34

38.34

90.86

90.86

4.11

5.39

6.51

8.10

14.20

19.88

24.14

46.85

58.22

120.71

3.77

4.21

4.21

4.24

4.78

5.54

6.09

8.96

9.36

12.24

12.24

17.06

18.89

39.34

39.34

70.28

70.28

115.57


All Compression Fittings are Made to Order (MTO)and sold in box qty's (as indicated in data tables).


36 www.astore.co.uk

90° TEE 514D x D x D CODE BOX QTY £16 x 16 x 16 P.514.0160 22020 x 20 x 20 P.514.0200 12025 x 25 x 25 P.514.0250 90 32 x 32 x 32 P.514.0320 5040 x 40 x 40 P.514.0400 3050 x 50 x 50 P.514.0500 20 63 x 63 x 63 P.514.0630 1275 x 75 x 75 P.514.0750 790 x 90 x 90 P.514.0900 5110 x 110 x 110 P.514.1100 5

90° TEE WITH THREADED MALE OFF-TAKE 516D x G x D CODE BOX QTY £16 x 1/2" x 16 P.516.016B 24020 x 1/2" x 20 P.516.020B 14020 x 3/4" x 20 P.516.020C 14025 x 3/4" x 25 P.516.025C 10025 x 1" x 25 P.516.025D 10032 x 1" x 32 P.516.032D 6032 x 11/4" x 32 P.516.032E 6040 x 11/4" x 40 P.516.040E 3040 x 11/2" x 40 P.516.040F 3050 x 11/2" x 50 P.516.050F 2050 x 2" x 50 P.516.050G 2063 x 2" x 63 P.516.063G 1263 x 21/2" x 63 P.516.063H 1275 x 21/2" x 75 P.516.075H 1075 x 3" x 75 P.516.075I 1090 x 3" x 90 P.516.090I 690 x 4" x 90 P.516.090L 6110 x 4" x 110 P.516.110L 3

90° ELBOW WITH THREADED FEMALE OFF-TAKE 518

D x D CODE BOX QTY £ 20 x 1/2" P.518.020B 260 20 x 3/4" P.518.020C 260 25 x 1/2" P.518.025B 180 25 x 3/4" P.518.025C 180 25 x 1" P.518.025D 160 32 x 1/2" P.518.032B 110 32 x 3/4" P.518.032C 110 32 x 1" P.518.032D 110• 32 x 11/4" P.518.032E 90• 40 x 11/4" P.518.040E 60• 40 x 11/2" P.518.040F 60• 50 x 11/2" P.518.050F 35• 50 x 2" P.518.050G 35• 63 x 2" P.518.063G 20• 63 x 21/2" P.518.063H 20• 75 x 21/2" P.518.075H 14• 75 x 3" P.518.075I 14• 90 x 3" P.518.090I 10• 90 x 4" P.518.090L 10• 110 x 4" P.518.110L 5

•Off-take with metal stiffening ring

90° TEE WITH THREADED FEMALE OFF-TAKE 515

D x G x D CODE BOX QTY £ 16 x 3/8" x 16 P.515.016A 240 16 x 1/2" x 16 P.515.016B 240 20 x 1/2" x 20 P.515.020B 140 20 x 3/4" x 20 P.515.020C 140 25 x 1/2" x 25 P.515.025B 100 25 x 3/4" x 25 P.515.025C 100 25 x 1" x 25 P.515.025D 100 32 x 1/2" x 32 P.515.032B 60 32 x 3/4" x 32 P.515.032C 60 32 x 1" x 32 P.515.032D 60• 32 x 11/4" x 32 P.515.032E 50• 40 x 1" x 40 P.515.040D 30• 40 x 11/4" x 40 P.515.040E 30• 40 x 11/2" x 40 P.515.040F 30• 50 x 11/2" x 50 P.515.050F 20• 50 x 2" x 50 P.515.050G 20• 63 x 2" x 63 P.515.063G 12• 63 x 21/2" x 63 P.515.063H 12• 75 x 21/2" x 75 P.515.075H 10• 75 x 3" x 75 P.515.075I 10• 90 x 3" x 90 P.515.090I 6• 90 x 4" x 90 P.515.090L 6• 110 x 4" x 110 P.515.110L 3

•Off-take with metal stiffening ring

>COMPRESSION FITTINGS

4.24

4.24

5.39

4.95

5.14

6.65

6.65

6.65

8.53

11.64

11.64

15.62

15.62

21.27

23.00

37.65

37.65

70.72

70.72

116.43

4.69

4.69

5.54

5.54

7.11

7.11

7.97

9.36

9.36

9.36

9.36

17.06

17.06

18.46

22.70

25.55

32.69

32.69

53.95

53.95

83.78

85.18

126.36

5.14

6.94

9.24

12.07

19.88

26.96

38.34

66.74

92.28

177.52

WALL BRACKETS 524

SIZE CODE BOX QTY £25 x 3/4" P.524.025C 150 13.14

5.54

5.97

5.97

7.69

7.69

9.80

9.80

17.06

17.06

24.14

24.14

46.85

46.85

55.39

55.39

82.35

82.35

133.48

90° REDUCED TEE 523D x G CODE BOX QTY £25 x 20 x 25 P 523.025B 100 32 x 25 x 32 P 523.032C 60 40 x 32 x 40 P 523.040D 20 63 x 50 x 63 P 523.063F 15

7.69

10.07

16.59

31.97

REDUCING PIECE 517D x G CODE BOX QTY £50 x 20 P.517.050B 120 50 x 25 P.517.050C 120

JOINT WITH FLANGE 520D x G CODE BOX QTY £75 x 21/2" P.520.075H 13 75 x 3” P.520.075I 13 90 x 3” P.520.090I 8 90 x 4” P.520.090L 8 110 x 4" P.520.110L 8

PLUG 521D CODE BOX QTY £16 P.521.0160 500 20 P.521.0200 400 25 P.521.0250 250 32 P.521.0320 150 40 P.521.0400 90 50 P.521.0500 60 63 P.521.0630 30 75 P.521.0750 28 90 P.521.0900 22 110 P.521.1100 8

17.40

17.40

58.22

65.32

73.85

98.01

106.49

2.84

3.69

4.24

4.84

8.25

12.24

16.90

35.52

44.33

88.05


All Compression Fittings are Made to Order (MTO)and sold in box qty's (as indicated in data tables).


37

COMP

RESS

ION

FITTIN

GS

www.astore.co.uk

NOTES



We pride ourselves on being able to offer the highest level of

customer service possible, our customer services team offer order

processing, stock planning & availability updates, all designed

to provide you our customer with an improved level of service.

0844 800 5509Call our Customer Services team today

www.astore.co.uk


39www.astore.co.uk

ASTORE UK - TERMS AND CONDITIONS OF SALE

1. DEFINITIONS:‘Seller’ shall mean Glynwed Pipe Systems Limited, registered in England under number1698059. ‘Buyer’ shall mean any company, organisation or individual to whom a quotationis offered, or whose order is accepted by the Seller.

2. CONDITIONS:All offers, quotations, estimates, acceptances and contracts are subject to theseConditions of Business and any terms or conditions which any other person shall seek toimpose or make part of any contract shall, so far as is inconsistent with these Conditionsof Business, not apply unless expressly agreed by the Seller in writing. The headings inthese conditions are for convenience only and shall not affect their interpretation.

3. QUOTATIONS, PRICE VARIATIONS AND MADE TO ORDER GOODS:a) Any quotation given by the Seller is an invitation to the Buyer to make an offer only andno order of the Buyer placed with the Seller in pursuance of a quotation or otherwise shallbe binding on the Seller unless and until it is accepted in writing by the Seller.b) Unless stated otherwise, all quotations and published price lists are ex works, exclusiveof VAT and shall remain valid for 30 days or such period as may be quoted butnevertheless the Seller may amend or withdraw any quotation by written or oral notice.Quotations may be varied if the Buyer makes variations in his specifications but seespecial conditions relating to Made to Order Goods.c) Certain products are denoted ‘MTO’ in the Seller’s published price lists. These productsare Made to Order Goods and the Seller manufactures or procures these goods on abespoke basis only. Where a Buyer has made an offer for “MTO” products that the Sellerhas accepted in writing the Buyer forfeits their right to cancel their offer unless the Sellerconfirms in writing that it will accept cancellation by the Buyer. Where the Seller does notprovide written confirmation of the Buyer’s cancellation the Buyer remains liable for the fullcontractual value of all ‘MTO’ products.

4. STATEMENTS OR REPRESENTATIONS TO THE BUYER:If any statement or representation has been made to the Buyer upon which the Buyerrelies other than in the documents enclosed with the Seller's quotation, the Buyer must setout that statement or representation in a document to be attached to or endorsed on theorder in which case the Seller may submit a new quotation.

5. DELIVERY - TIME:a) Any period for delivery given at any time and in any manner by the Seller is an estimateonly and is not binding on the Seller. Delivery periods are normally calculated from thelater of: i) acceptance of order; or ii) where applicable, the receipt by the Seller of a detailed specification or drawings.b) Time shall not be deemed to be of the essence of the contract. Failure by the Seller tomeet any quoted delivery period for any part or the whole of the order shall not entitle theBuyer to rescind the contract or to claim damages of any nature.c) The Seller will endeavour to comply with reasonable requests by the Buyer forpostponement of delivery but shall be under no obligation to do so. Where delivery ispostponed otherwise than due to default by the Seller the Buyer shall pay all costs andexpenses including a reasonable charge for storage and transportation occasionedthereby and an extra charge for split delivery if applicable.d) The Buyer will receive delivery of any consignment between the hours of 8.00am and4.00pm Monday to Friday inclusive, unless otherwise agreed in writing. Cost incurred bythe Seller arising from the Buyer's refusal to accept consignments within the agreed hoursshall be borne by the Buyer.

6. DELIVERY AND RISK:a) Except where stated to the contrary in the contract, delivery shall be made as follows: i) where the Buyer provides the transport, delivery shall be made ex the Seller's works; ii) where the Seller provides the transport, delivery shall be made to the premises of the Buyer, or the premises of the Buyer's customer or works site if the Buyer has requested delivery to be so made but where the Buyer has made such a request the Sellerwill make a first delivery to the Buyer's customer or works site as somuch of the goods as is available for that delivery but subsequentdeliveries will be made to the premises of the Buyer.b) The Seller may at its discretion make partial delivery of orders and invoice the same.c) Risk in the goods shall pass on delivery.d) Where goods are sent FOB the Seller's responsibility shall cease when the goods areplaced on board ship or aircraft without the need for the Seller to give notice to the Buyerand the provisions of Section 32(3) of the Sale of Goods Act 1979 shall not apply.

7. OWNERSHIP OF GOODS:a) The goods shall remain the sole and absolute property of the Seller as legal andequitable owner until such time as the Buyer shall have paid to the Seller the contract pricetogether with the full price of any other goods the subject of any contract between theSeller and the Buyer.b) The Buyer acknowledges that until such time as the property in the goods passes to theBuyer he is in possession of the goods as a bailee and fiduciary agent for the Seller andthe Purchaser shall store the goods in such a manner that they are clearly identifiable asthe property of the Seller.c) Until payment due under all contracts between the Buyer and the Seller had been madein full, in the event of sale of the goods by the Buyer: i) the Seller shall be entitled to trace all proceeds of sale received by the Buyer through any bank or other account maintained by the Buyer; and ii) the Buyer shall if requested by the Seller in writing to so assign its rights to recover the selling price of the goods from the third parties concerned. Such monies to be held separately by the Buyer as agent on behalf of the Seller.d) The Seller may for the purpose of recovery of its goods enter upon any premises wherethey are stored or where they are reasonably thought to be stored and may repossess thesame.

8. TERMS OF PAYMENT:In the event of default in payment according to the agreed payment terms between theSeller and the Buyer – i.e. by the end of the month following the month of despatch of thegoods the Seller shall be entitled without prejudice to any other right or remedy to suspendall further deliveries and to charge interest on any amount outstanding at the rate of 2%per month until payment in full is made (a part of a month being treated as a full month forthe purpose of calculating interest).

9. SHORTAGES AND DEFECTS APPARENT ON DELIVERY:a) It shall be the responsibility of the Buyer to inspect or arrange for an inspection of thegoods on delivery whether the goods are delivered to the Buyer's premises or to thepremises of the Buyer's customer or to a works site. If no such inspection is made theBuyer shall be deemed to have accepted the goods.b) The Buyer shall have no claim for shortages or defects apparent on inspection unless: i) a written complaint is made to the Seller within three days of receipt of the goods specifying the shortage or defect; and ii) the Seller is within seven days of receipt of the complaint given an opportunity to inspect the goods and investigate the complaint before any use is made of the goods.c) If a complaint is not made to the Seller as herein provided then in respect of suchshortages or defects the goods shall be deemed to be in all respects in accordance withthe contract and the Buyer shall be bound to pay for the same accordingly.

10. CLAIMS FOR DEFECTS NOT APPARENT ON INSPECTION:a) The Buyer shall have no claim for defects not apparent on inspection unless the Selleris notified of defective workmanship or materials within twelve months from delivery of thegoods. Provided that the goods have been installed and applied in accordance with anyrelevant recommendations made by the Seller, the Seller will at its option replace thegoods or refund the net invoiced price in respect of the goods which have been shown tobe defective. If the Seller does so supply substitute goods the Buyer shall be bound toaccept such substituted goods in full satisfaction of the obligations of the Seller under thecontract.b) The Buyer shall in any event have no claim or set-off in respect of defects unless awritten complaint is sent to the Seller as soon as the defect is noticed and no use is madeof the goods thereafter or alteration made thereto by the Buyer before the Seller is givenan opportunity to inspect the goods.c) The Buyer is responsible for ensuring that the goods are fit for any particular purpose,and no warranty or condition of fitness for any particular purpose is to be implied into thecontract.

11. LIABILITY:Save as stated in Conditions 9 and 10 (and save in respect of death or personal injuryresulting from the negligence of the Seller its servants or agents) the Seller shall not beliable for any claim or claims for direct or indirect consequential or incidental injury loss ordamage made by the Buyer against the Seller whether in contract or in tort (includingnegligence on the part of the Seller its servants or agents) arising out of or in connectionwith any defect in the goods or their fitness or otherwise for any particular purpose or anyact omission neglect or default of the Seller its servants or agents in the performance ofthe contract.

12. FORCE MAJEURE:Notwithstanding anything herein contained neither the Buyer nor the Seller is to be heldliable for any delay or failure to carry out the contract due wholly or in part to an act of Godaction by any Government whether British or foreign civil war strikes and/or lockoutswheresoever occurring fire trade disputes floods or unfavourable weather or any materialbecoming unavailable or irreplaceable (whether at all or at commercially acceptableprices) or any other circumstances beyond the control of the Seller.

13. SUB-CONTRACTING:The Seller reserves the right to sub-contract the fulfilment of any order or any part thereof.

14. INSOLVENCY AND BREACH OF CONTRACT:In the event that:a) the Buyer commits any breach of the contract and fails to remedy such breach (if capable of remedy) within a period of thirty days from receipt of a notice in writing fromthe Seller requesting such remedy; orb) any distress or execution is levied upon any of the goods or property of the Buyer; orc) the Buyer offers to make any arrangements with or for the benefit of its creditors or (if an individual) becomes subject to a petition for a bankruptcy order or (being a limitedcompany) has a receiver appointed of the whole or any part of its undertaking property orassets; ord) an order is made or a resolution is passed or analogous proceedings are taken for thewinding up of the Buyer (save for the purpose of reconstruction or amalgamation withinsolvency and previously approved in writing by the Seller) the Seller shall thereupon beentitled without prejudice to its other rights hereunder forthwith to suspend all furtherdeliveries until the default has been made good or to determine the contract and anyunfulfilled part thereof or at the Seller's option to make partial deliveries. Notwithstandingany such termination the Buyer shall pay to the Seller at the contract rate for all the goodsdelivered up to and including the date of termination.

15. INDUSTRIAL PROPERTY RIGHTS:If goods supplied by the Seller to the Buyer's design or specifications infringe or arealleged to infringe any patent or registered design right or copyright the Buyer willindemnify the Seller against all damages, costs and expenses incurred by the Seller as aresult of the infringement or allegation. The Buyer will give the Seller all possible help inmeeting any infringement claim brought against the Seller.

16. BUYER'S ERROR IN ORDERING:In the event the Buyer orders incorrectly the Seller will be under no obligation to the Buyerto rectify or assist in rectifying the error.

17. LAW AND JURISDICTION:The contract shall be subject in all respects to English Law and to the jurisdiction of theEnglish Courts.


PRL10200 DECEMBER 2013 V2

ASTORE UKWalsall Road, Norton Canes, Cannock, Staffs WS11 9NS

Telephone: 0844 800 5509 • Fax: +44 (0)1543 272413

E-mail: [email protected]

Website: www.astore.co.uk

Astore UK reserves the right to modify the details in this publication as products and specifications are updated and improved.

The content of this publication is for general information only and it is user’s responsibility to determine the suitability of anyproduct for the purpose intended.

For further information on all Astore UK products and services contact our Customer Services Team as detailed below.

Customer Services Tel: 0844 800 5509Fax: 0800 317 875

Astore UK is a trade name of Glynwed Pipe Systems Ltd. Company Number 1698059

Registered Office:Astore UKWalsall RoadNorton CanesCannockStafforshireWS11 9NSUnited Kingdom



Date post:	20-Apr-2020
Category:	Documents
Upload:	others
View:	14 times
Download:	0 times

Price List - Astore plastic pipe work systems · ABS pipe, fittings and valves. Pipework and...

Documents