www.safetopdiy.co.zaPRICELIST 2015
Nationwide: Telephone 0860 736 275 Fax 086 572 8566 e-mail [email protected] Website www.safetopdiy.co.za Cape Town: Tel: 021 797 3520 I Unit 5, Pride Park, Wetwyn Road, Wetton Durban: Tel: 031 579 1141 I No.2 Cnr. Palmfield & Willowfield Road, Springfield ParkJohannesburg: Tel: 011 397 6999 I Unit 5, Vitoria Industrial Park, 47 Kelly Road, Jet Park
6 Carbon Alloy Hole Saws
HSS Hole Saws
Bi-Metal Hole Saws
Arbors for Bi-Metal Hole Saws
Arbors for Carbon alloy Hole Saws
7 Diamond Saw Blade Continuous
Diamond Saw Blade Segmented
Diamond Saw Blade Turbo
HCS Jigsaw Blade - T Shank
HSS Jigsaw Blade - T Shank
Carbide Grit Jigsaw Blade - T Shank
HCS Jigsaw Blade - U Shank
HSS Jigsaw Blade - U Shank
8 Wire Brush Sets
Wire Wheel Brush Crimped
Wire Cup Brush Crimped
Wire End Brush Crimped
Screw Pilot Hole Bits
Tungsten Hole Saws
Ceramic Tile Cutter
Glass & Tile Drill Bits
9 SDS-Max Moil Chisel - Point
SDS-Max Moil Chisel - Flat
SDS-Max Moil Chisel - Flat Angled
Hacksaw Blade - Carbon Steel
Hacksaw Blade - Bi-Metal
Action Can
CONTENTS:1 Pocket Screwdriver
Wood Drill Bit Sets
Masonry Drill Bit Sets
SDS-Plus Drill Bit Sets
SDS-Plus Drill Bit Sets
HSS Drill Bit Sets
2 Pozi Bits
Slotted Bits
Torx Bits
Phillips Bits
Double Ended Phillips Bits
Square Bits
Magnetic Quick Release Bit Holder
Magnetic Bit Holder
Nut Setters
Dry Wall Indenter
3 High Speed Steel Twist Drill Bits (Roll-forged)
High Speed Steel Twist Drill Bits (Fully ground)
High Speed Saw Drill Bits
HSS Step Drill Bits
HSS Countersunk Bits
4 Flat Wood Drill Bits
Flat Wood Bit Extention
Auger Drill Bits
Brad Point Drill Bits
Forstner Drill Bits
Plug Cutter
5 Masonry Drill Bits
Power Masonry Drill Bits
SDS-Plus Hammer Drill Bits (Single Flute)
SDS-Plus Hammer Drill Bits (4 Flute)
Telephone 0860 736 275 Fax 086 572 8566 e-mail [email protected] Website www.safetopdiy.co.za
1Telephone 0860 736 275 Fax 086 572 8566 e-mail [email protected] Website www.safetopdiy.co.za
SDS-Plus Drill Bit Sets
STOCK CODE QTY PCS PRICE/ BLISTER
PPSDSSET05 5 58.20
Contains: 5 / 6 x110mm 6 / 8 / 10 x160mm
PPSDSSET08 8 120.90
Contains: 5 / 6 / 8 x10mm - 6 / 8 / 10 / 12 x160mm 8 x 120mm
HSS Drill Bit Sets
STOCK CODE QTY PCS PRICE/ BLISTER
PPHSSSETB13 13 54.92
Contains: 1.5 / 2 / 2.5 / 3 / 3.2 / 3.5 / 4 / 4.5 / 4.8 5 / 5.5 / 6 / 6.5mm
PPHSSSETB19 19 78.52
Contains: 1 / 1.5 / 2 / 2.5 / 3 / 3.5 / 4 / 4.5 / 5 / 5.5 6 / 6.5 / 7 / 7.5 / 8 / 8.5 / 9 / 9.5mm
Masonry Drill Bit Sets
STOCK CODE QTY PCS PRICE/ BLISTER
PPMDBSET05 5 31.40
Contains: 4 / 5 / 6 / 8 / 10mm
Wood Drill Bit Sets
STOCK CODE QTY PCS PRICE/ BLISTER
PPWBBSET10 10 138.00
Contains: 6 / 10 / 13 / 16 / 19 / 22 / 25 / 32mm 300mm Extension shank / 1 hex key
• 4-in-1 Pocket Mini Screwdriver
Phillips #0. #00
Slotted 1.5mm, 3mm
Pocket Screwdriver
PCS24
PRODUCT NUMBER QTY PCS PRICE/
BLISTER
BTPS 24 475.00
2Telephone 0860 736 275 Fax 086 572 8566 e-mail [email protected] Website www.safetopdiy.co.za
Pozi Bits
STOCK CODE SIZE LENGTH (mm)
PPPZ2501 No.1 25
PPPZ2502 No.2 25
PPPZ2503 No.3 25
PPPZ2504 No.4 25
PPPZ5001 No.1 50
PPPZ5002 No.2 50
PPPZ5003 No.3 50
PPPZC251 ContainsNo.s 1/2/3 25
PPPZC501 ContainsNo.s 1/2/3 50
Slotted Bits
STOCK CODE SIZE LENGTH (mm)
PPSL2504 No.4 25
PPSL2506 No.6 25
PPSL2508 No.8 25
PPSL2510 No.10 25
PPSL2512 No.12 25
PPSL2514 No.14 25
PPSL5004 No.4 50
PPSL5006 No.6 50
PPSL5008 No.8 50
PPSL5010 No.10 50
PPSL5012 No.12 50
PPSL5014 No.14 50
PPSLC01 ContainsNo.s 4/6/8 25
PPSLC252 ContainsNo.s 10/12/14 25
PPSLC501 ContainsNo.s 4/6/8 50
PPSLC502 ContainsNo.s 10/12/14 50
Torx Bits
STOCK CODE SIZE LENGTH (mm)
PPTX2510 No.10 25
PPTX2515 No.15 25
PPTX2520 No.20 25
PPTX2525 No.25 25
PPTX2530 No.30 25
PPTX2540 No.40 25
Square Bits
STOCK CODE SIZE LENGTH (mm)
PPSQ2501 No.1 25
PPSQ2502 No.2 25
PPSQ5001 No.1 50
PPSQ5002 No.2 50
Phillips Bits
STOCK CODE SIZE LENGTH (mm)
PPPH2501 No.1 25
PPPH2502 No.2 25
PPPH2503 No.3 25
PPPH2504 No.4 25
PPPH5001 No.1 50
PPPH5002 No.2 50
PPPH5003 No.3 50
PPPHC251 ContainsNo.s 1/2/3 25
PPPHC501 ContainsNo.s 1/2/3 50
Nut Setters
STOCK CODE SIZE LENGTH (mm)
PPNS01 5/16 65
PPNS02 3/8 65
PPNS03 10mm 65
Magnetic Quick Release Bit Holder
STOCK CODE SIZE LENGTH (mm)
PPBT02 1/4 60
Magnetic Bit Holder
STOCK CODE SIZE LENGTH (mm)
PPBT01 1/4 60
Dry Wall Indenter
STOCK CODE SIZE LENGTH (mm)
PPDW01 No.2 35
Double Ended Phillips Bits
STOCK CODE SIZE LENGTH (mm)
PPPHDE02 No.2 45
3Telephone 0860 736 275 Fax 086 572 8566 e-mail [email protected] Website www.safetopdiy.co.za
High Speed Steel Twist Drill BitsRoll-forged. For drilling into steel, non-ferrous metal and plastic.
STOCK CODE SIZE (mm)
PPHSS0010 1.0
PPHSS0015 1.5
PPHSS0020 2.0
PPHSS0022 2.2
PPHSS0025 2.5
PPHSS0028 2.8
PPHSS0030 3.0
PPHSS0032 3.2
PPHSS0033 3.3
PPHSS0035 3.5
PPHSS0038 3.8
PPHSS0040 4.0
PPHSS0042 4.2
PPHSS0045 4.5
PPHSS0048 4.8
PPHSS0049 4.9
PPHSS0050 5.0
PPHSS0052 5.2
PPHSS0055 5.5
PPHSS0058 5.8
PPHSS0060 6.0
PPHSS0065 6.5
PPHSS0070 7.0
PPHSS0075 7.5
PPHSS0080 8.0
PPHSS0085 8.5
PPHSS0090 9.0
PPHSS0095 9.5
PPHSS010 10.0
PPHSS0105 10.5
PPHSS011 11.0
PPHSS0115 11.5
PPHSS012 12.0
PPHSS0125 12.5
PPHSS0130 13.0
Fully Ground. For drilling into steel, non-ferrous metal and plastic.
High Speed Steel Twist Drill Bits
STOCK CODE SIZE (mm)
PPHSSGB02 2.0
PPHSSGB025 2.5
PPHSSGB03 3.0
PPHSSGB032 3.2
PPHSSGB035 3.5
PPHSSGB04 4.0
PPHSSBG042 4.2
PPHSSGB045 4.5
PPHSSGB048 4.8
PPHSSGB05 5.0
PPHSSGB055 5.5
PPHSSGB06 6.0
PPHSSGB065 6.5
PPHSSGB07 7.0
PPHSSGB075 7.5
PPHSSGB08 8.0
PPHSSGB085 8.5
PPHSSGB09 9.0
PPHSSGB010 10.0
PPHSSGB0105 10.5
PPHSSGB0111 11.0
PPHSSGB0115 11.5
PPHSSGB012 12.0
PPHSSGB0125 12.5
PPHSSGB013 13.5
Multi-functional drill bit cuts own starting hole and any shape in any direction. Suitable for use in wood, plastic and aluminium.
High Speed Saw Drill Bits
STOCK CODE SIZE (mm)
PPHSSSB04 4.0
PPHSSSB05 5.0
PPHSSSB06 6.0
PPHSSSB08 8.0
PPHSSSB10 10.0
HSS Step Drill BitsFor drilling holes into solid materials up to a thickness of 4mm.
STOCK CODE SIZE (mm)
PPHSSSD4125 4-12 / 5 Holes
PPHSSSD4129 4-12 / 9 Holes
PPHSSSD42210 4-22 / 10 Holes
PPHSSSD6187 6-18 / 7 Holes
5 Flute.For countersinking bore holes into wood and soft metals for countersunk screws.
HSS Countersunk Bits
STOCK CODE SIZE (mm)
PPHSSC13 13
PPHSSC16 16
PPHSSC20 20
4Telephone 0860 736 275 Fax 086 572 8566 e-mail [email protected] Website www.safetopdiy.co.za
STOCK CODE LENGTH (mm)
PPWBFE 300
Flat Wood Drill Bit ExtentionSecurely extend flatwood drill bits to drill extra deep holes.
STOCK CODE DIA.(mm)
LENGTH (mm)
PPAB06230 6 230
PPAB08230 8 230
PPAB10230 10 230
PPAB12230 12 230
PPAB14230 14 230
PPAB16230 16 230
PPAB18230 18 230
PPAB20230 20 230
Auger Drill BitsFor precise drilling into soft and hardwood, large section beams, chipboard and plywood.
Flat Wood Drill BitsLong centre point for accurate hole location. For drilling smooth clean holes into softwood, chipboard and floor boards.
STOCK CODE DIA.(mm)
LENGTH (mm)
PPWBF0006 6 152
PPWBF0008 8 152
PPWBF0010 10 152
PPWBF0011 11 152
PPWBF0012 12 152
PPWBF0013 13 152
PPWBF0014 14 152
PPWBF0015 15 152
PPWBF0016 16 152
PPWBF0017 17 152
PPWBF0018 18 152
PPWBF0019 19 152
PPWBF0020 20 152
PPWBF0022 22 152
PPWBF0024 24 152
PPWBF0025 25 152
PPWBF0026 26 152
PPWBF0028 28 152
PPWBF0030 30 152
PPWBF0032 32 152
PPWBF0035 35 152
PPWBF0038 38 152
PPWBF0040 40 152
Brad Point Wood Drill BitsFor drilling accurate, splinter-free holes into softwood, hardwood, plywood and hardboard.
STOCK CODE DIA.(mm)
LENGTH (mm)
PPWBBP004 4.0 75
PPWBBP005 5.0 85
PPWBBP006 6.0 90
PPWBBP007 7.0 105
PPWBBP008 8.0 115
PPWBBP009 9.0 120
PPWBBP010 10.0 120
PPWBBP011 11.0 150
PPWBBP012 12.0 150
PPWBBP013 13.0 150
PPWBBP014 14.0 150
PPWBBP016 16.0 150
STOCK CODE SIZE(mm)
PPFB015 15
PPFB020 20
PPFB025 25
PPFB030 30
PPFB035 35
PPFB040 40
PPFB050 50
Bores smooth, flat bottomed holes.
Forstner Drill Bits
Plug cutters produce accurate wooden plugs for covering screw holes in decking, flooring, frames and other wooden projects.
Plug Cutter
STOCK CODE DIA. (mm)
PPSPC08 8
PPSPC10 10
PPSPC12 12
PPSPC14 14
PPSPC16 16
PPSPC20 20
NEW
5Telephone 0860 736 275 Fax 086 572 8566 e-mail [email protected] Website www.safetopdiy.co.za
Masonry Drill BitsFor drilling into masonry, cement brick and block.
STOCK CODE SIZE (mm)
PPMDB030 3 x 60
PPMDB040 4 x 75
PPMDB050 5 x 85
PPMDB055 5.5 x 85
PPMDB060 6 x 100
PPMDB065 6.5 x 100
PPMDB070 7 x 100
PPMDB080 8 x 120
PPMDB090 9 x 120
PPMDB100 10 x 120
PPMDB110 11 x 150
PPMDB120 12 x 150
PPMDB130 13 x 150
PPMDB140 14 x 150
PPMDB160 16 x 160
PPMDB200 20 x 200
LONG LENGTH BITS
PPMDB06300 6 x 300
PPMDB08300 8 x 300
PPMDB10300 10 x 300
PPMDB12300 12 x 300
PPMDB16300 16 x 300
Single flute / 2 cutting edges For drilling into masonry and concrete
SDS-Plus Hammer Drill Bits
STOCK CODE SIZE (mm)
PPSDS05110 5 x 110
PPSDS05160 5 x 160
PPSDS055110 5.5 x 110
PPSDS06110 6 x 110
PPSDS06160 6 x 160
PPSDS08110 8 x 110
PPSDS08160 8 x 160
PPSDS08210 8 x 210
PPSDS08310 8 x 310
PPSDS08450 8 x 450
PPSDS10160 10 x 160
PPSDS10210 10 x 210
PPSDS10310 10 x 310
PPSDS10450 10 x 450
PPSDS12210 12 x 210
PPSDS12310 12 x 310
PPSDS12450 12 x 450
PPSDS14210 14 x 210
PPSDS16210 16 x 210
PPSDS16310 16 x 310
PPSDS16450 16 x 450
PPSDS18210 18 x 210
PPSDS20210 20 x 210
PPSDS20310 20 x 310
PPSDS20450 20 x 450Power Masonry Drill BitsFor drilling into concrete, masonry, cement brick, block and rock
STOCK CODE SIZE (mm)
PPMDBS040 4 x 150
PPMDBS050 5 x 150
PPMDBS055 5.5 x 150
PPMDBS060 6 x 150
PPMDBS065 6.5 x 150
PPMDBS070 7 x 150
PPMDBS080 8 x 150
PPMDBS090 9 x 150
PPMDBS100 10 x 150
PPMDBS110 11 x 150
PPMDBS120 12 x 150
PPMDBS140 14 x 160
PPMDBS160 16 x 160
PPMDBS180 18 x 160
PPMDBS200 20 x 160
PPMDBS220 22 x 160
PPMDBS240 24 x 160
4 flutes / 4 cutting edges / Superior gradeFor drilling into masonry and concrete
SDS-Plus Hammer Drill Bits
STOCK CODE SIZE (mm)
PPSDSS08160 8 x 160
PPSDSS08210 8 x 210
PPSDSS08310 8 x 310
PPSDSS10160 10 x 160
PPSDSS10210 10 x 210
PPSDSS10310 10 x 310
PPSDSS12160 12 x 160
PPSDSS12210 12 x 210
PPSDSS12310 12 x 310
PPSDSS14210 14 x 210
PPSDSS16210 16 x 210
PPSDSS16310 16 x 310
6Telephone 0860 736 275 Fax 086 572 8566 e-mail [email protected] Website www.safetopdiy.co.za
Bi-Metal Hole SawFor cutting into steel, cast iron, aluminium, wood and plastic.
STOCK CODE DIA. (mm)
PPHS14 14
PPHS16 16
PPHS19 19
PPHS20 20
PPHS22 22
PPHS25 25
PPHS30 30
PPHS32 32
PPHS35 35
PPHS38 38
PPHS40 40
PPHS44 44
PPHS46 46
PPHS48 48
PPHS51 51
PPHS54 54
PPHS57 57
PPHS60 60
PPHS64 64
PPHS67 67
PPHS70 70
PPHS73 73
PPHS76 76
PPHS83 83
PPHS89 89
PPHS92 92
PPHS102 102
PPHS108 108
PPHS111 111
PPHS114 114
For cutting into wood, wall boards, plastic and non-ferrous metal.
Carbon Alloy Hole Saws
STOCK CODE DIA. (mm)
PPHSC25 25
PPHSC28 28
PPHSC32 32
PPHSC35 35
PPHSC38 38
PPHSC41 41
PPHSC44 44
PPHSC48 48
PPHSC51 51
PPHSC54 54
PPHSC57 57
PPHSC60 60
PPHSC64 64
PPHSC67 67
PPHSC70 70
PPHSC76 76
PPHSC82 82
PPHSC86 86
STOCK CODE SIZE (mm)
PPHSA00 3/8” Hex 14 ~ 30mm
PPHSA01 sds-plus 32 ~ 203mm
PPHSA02 3/8” Hex 32 ~ 203mm
Arbors for Bi-Metal Hole Saws
HSS Hole Saws
STOCK CODE DIA. (mm)
PPHSHSS15 15
PPHSHSS16 16
PPHSHSS18 18
PPHSHSS20 20
PPHSHSS25 25
PPHSHSS30 30
PPHSHSS35 35
PPHSHSS40 40
PPHSHSS50 50
For high precision drilling into metallic sheets.
Arbors for Carbon Alloy Hole Saws
STOCK CODE SIZE (mm)
PPHSCA00 19 ~ 28
PPHSCA01 32 ~ 140
7Telephone 0860 736 275 Fax 086 572 8566 e-mail [email protected] Website www.safetopdiy.co.za
• Providesasmoothcut• SuitableforCeramicTilesandStones
Diamond Saw BladeContinuous
STOCK CODE SIZE (mm)
PPDSBC115 115
PPDSBC230 230
• SuitableforConcrete,Brick,Masonry,CementandClayTiles
Diamond Saw BladeSegmented
STOCK CODE SIZE (mm)
PPDSBS115 115
PPDSBS230 230
• Provideslongerlifeandlowercostpercut than continuous blades
• Mayproduceslightclipping• SuitableforConcrete,Brick,Masonry
and Stone
Diamond Saw BladeTurbo
STOCK CODE SIZE (mm)
PPDSBT115 115
PPDSBT230 230
STOCK CODE TYPE TPI
PPJBHCS10006 HCS 6
PPJBHCS10008 HCS 8
PPJBHCS10010 HCS 10
For timber.
HCS Jigsaw Blade - T Shank
STOCK CODE TYPE TPI
PPJBHSS10014 HSS 14
PPJBHSS07524 HSS 24
For metal - Ferrous and Non-Ferrous.
HSS Jigsaw Blade - T Shank
For laminates, composites, fibreglass, ceramic tiles etc.
Carbide Grit Jigsaw Blade - T Shank
STOCK CODE DIA. (mm)
PPJBCG100 Carbide Grit
STOCK CODE TYPE TPI
PPJBHSS14 HSS 14
PPJBHSS24 HSS 24
For metal - Ferrous and Non-Ferrous.
HSS Jigsaw Blade - U Shank NEW
STOCK CODE TYPE TPI
PPJBHCS10 HCS 10
PPJBHCS12 HCS 12
For timber.
HCS Jigsaw Blade - U Shank NEW
STOCK CODE TYPE TPI
PPJBAUHCS 8, 10, 12
HSS 14, 24
5 pcs Assorted Set
Jigsaw Blade - T Shank NEW
STOCK CODE TYPE TPI
PPJBATHCS 6, 10, 12
HSS 14, 24
5 pcs Assorted Set
Jigsaw Blade - U Shank NEW
8Telephone 0860 736 275 Fax 086 572 8566 e-mail [email protected] Website www.safetopdiy.co.za
5 Piece set contains:Wheel Brush - 25mm, 38mmCupBrush-50mm,75mmEnd Brush - 25mm
Wire Brush Set
STOCK CODE DIA. (mm)
PPMWB 5
For deburring, removing surface coatings, derusting, descaling and cleaning.
Wire Wheel Brush Crimped
STOCK CODE DIA. (mm)
PPMWBCB038 38
PPMWBCB050 50
PPMWBCB063 63
PPMWBCB075 75
PPMWBCB100 100
For deburring, removing surface coatings, derusting, descaling and cleaning.
Wire End Brush Crimped
STOCK CODE DIA. (mm)
PPEBCB012 12
PPEBCB017 17
PPEBCB025 25
PPEBCB0030 30
For deburring, removing surface coatings, derusting, descaling and cleaning.
Wire Cup Brush Crimped
STOCK CODE DIA. (mm)
PPMCBC040 40
PPMCBC050 50
PPMCBC063 63
PPMCBC075 75
STOCK CODE DIA. (mm)
PPHSSGT03 3
PPHSSGT04 4
PPHSSGT05 5
PPHSSGT06 6
PPHSSGT08 8
PPHSSGT10 10
PPHSSGT12 12
For drilling glass tile, mirrors and ceramics. Spear point reduces cutting pressure for cleaner holes without chipping or breaking.
Glass & Tile Drill Bits
STOCK CODE DIA. (mm)
PPCTC25100 25 - 100
For cutting accurate, circular holes in ceramic tiles.Adjustable for holes 25mm to 100mm.
Ceramic Tile Cutter
STOCK CODE SET SIZE PCS.
SIZE (mm)
PPTHS007 7 26, 32, 38, 45, 50, 55, 65
PPTHS005 5 60, 67, 74, 83, 90
Tungsten Hole SawsFor drilling holes into wood, plastic board, construction panels and plastics.
STOCK CODE SIZE(mm)
PPSP06 #6
PPSP08 #8
PPSP10 #10
PPSP12 #12
With quick 6.35 quick change shank. For fast countersinking and boring in one operation.
Screw Pilot Hole Bits
9Telephone 0860 736 275 Fax 086 572 8566 e-mail [email protected] Website www.safetopdiy.co.za
STOCK CODE LENGTH (mm) TPI
PPHSBC30024 300 24
Cutswood,plastic,aluminium,coppertubingandmetal.
Hacksaw Blade - Carbon Steel
STOCK CODE LENGTH (mm) TPI
PPHSBB30024 300 24
Longlife-Increasedheatandwearresistance.Cutswood,plastic, aluminium, copper tubing, metal and stainless steel.
Hacksaw Blade - Bi-Metal
SDS-Max Moil Chisel - Flat Angled
STOCK CODE TYPE SIZE (mm)
PPSDSMAS300 FLAT ANGLED 75 x 300
SDS-Max Moil Chisel - Point
STOCK CODE TYPE SIZE (mm)
PPSDSMP400 POINT 400
SDS-Max Moil Chisel - Flat
STOCK CODE TYPE SIZE (mm)
PPSDSMC400 FLAT 25 x 400
PPSDSMS400 FLAT 50 x 400
PPSDSMS300 FLAT 75 x 300
CT-90 Cutting and Tapping FluidAerosol
CONTENT PRICE EACH
500ml Aerosol Consult Action Can pricelist
Key Features:•Drilling,sawingandthreadcutting
simplified•Safeonsteels,designedforstainless
steel and ceramics•Extendstoollife•Highratesofmetalremoval•Highantiweldfeatures•SiliconeandCFCsFree•Reducesheatandimprovessurface
finish
Application:•CuttingFluid•ElectricalProducts
Circular Saw Blades
COMING SOON
Telephone 0860 736 275 Fax 086 572 8566 e-mail [email protected] Website www.safetopdiy.co.za
1. All prices quoted are priced per each/blister.2. All prices quoted are excludive of V.A.T.3. We reserve the the right to amend prices
at short notice due to raw material price or exchange rate fluctuations.
Terms1. All prices quoted are inclusive of delivery within a 60km
radius of Cape Town.2. All prices quoted are inclusive of delivery to major centres, ie: George, Port Elizabeth, East London, Durban,
Bloemfontein, Johannesburg and Pretoria, for orders with a value in excess of R 1 000.00 excluding V.A.T.
3. Customers in outlying areas will have to pay for additional transport charges.
Delivery
E&OE - INFORMATION CORRECT AT TIME OF GOING TO PRESS: E&OE is an initialism standing for errors and omissions excepted.The phrase is used in an attempt to reduce legal liability for incorrect or incomplete information supplied in a
contractually related document such as a price list, quotation or specification. It is often applied as a disclaimer in situations in which the information to which it is applied is relatively fast moving. In legal terms, it seeks to make a statement that information cannot be relied upon, or may have changed by the time of use.