503.648.6121 | 800.447.5542 | Fax: 800.734.6377 | www.rfmseating.com619 S.W. Wood Street | Hillsboro, OR 97123
PRICELIST 2014Effective date: June 1, 2014
LIFT FLAP FORSPECIAL OPTIONS
YOUR STYLE. YOUR COMFORT. YOUR HEALTH.
RFM®RFM
®
TABLE OF CONTENTSEchelon (1915Q, 1925Q) ................................. 2Echelon (1935Q, 1945Q) ................................. 3Echelon (1955Q, 1965Q) ................................. 4 Essentials (160Q, 161Q) ................................... 5Essentials (162Q, 167Q) ................................... 6Fury (9961Q) ................................................... 7Internet (4814Q, 4834Q) .................................. 8Link (150Q) ...................................................... 9Rainier (R2Q, R4Q) ........................................ 10Rainier (R6Q, R8Q) ........................................ 11Tech (1435Q, 14314Q) ................................. 12Carmel (8214, 8215, 8218, 82114, NS821) ... 13Carmel (8234, 8235, 8238, 82314, NS823) ... 14Carmel (8294, 8295, 8298, 82914, NS829) ... 15Carmel (8213-37200, 82133-37200, 8233-37200, 82333-37200) ...................... 16Echelon (1915, 1917, 1918, 19114) ............... 17Echelon (1925, 1927, 1928, 19214) ............... 18Echelon (1935, 1937, 1938, 19314) ............... 19Echelon (1945, 1947, 1948, 19414) ............... 20Echelon (1955, 1957, 1958, 19514) ............... 21Echelon (1965, 1967, 1968, 19614) ............... 22Echelon (19133-37200, 19233-37200, 19333-37200, 19433-37200) .................... 23Essentials (160, 161) ...................................... 24Essentials (162, 167) ...................................... 25Evergreen (603, 603A, 604, 604A) ................. 26Fury (9961) .................................................... 27Internet (4814, 4815, 4818, 48114, NS481) ... 28Internet (4834, 4835, 4838, 48314, NS483) ... 29Internet (4894, 4895, 4898, 48914) ............... 30Internet (4813-37200, 48133) ......................... 31Internet (4833-37200, 48333-37200) .............. 32Internet (BT41, BT42) ....................................... 33Link (150, 152) .............................................. 34Manhattan (6934, 6935, 6938, 69314) .......... 35Manhattan (6944, 6945, 6948, 69414) .......... 36Manhattan (6984, 6985, 6988, 69814) .......... 37Manhattan (6994, 6995, 6998, 69914) .......... 38Metro (2006, 20050) ..................................... 39Metro (2086, 20850) ..................................... 40Multi-Shift (9806, 98050) ................................ 41Multi-Shift (9826, 98250) ................................ 42Multi-Shift (9896, 98950) ................................ 43Protask (5804, 5805, 5808, 58014, NS580) ... 44Protask 5824, 5825, 5828, 58214, NS582) .... 45
Protask (5844, 5845, 5848, 58414, NS584) ... 46Protask (5874, 5875, 5878, 58714, NS587) ... 47Protask (5823-37200, 58233-37200, 5843-37200, 58433-37200) ...................... 48Protask (BT51, BT52, BT55, BT56) .................... 49Rainier (R2, R2-8, R2-14, NSR2) ....................... 50Rainier (R4, R4-8, R4-14, NSR4) ....................... 51Rainier (R6, R6-8, R6-14, NSR6) ....................... 52Rainier (R8, R8-8, R8-14, NSR8) ....................... 53Rainier (R1-33-37200, R3-33-37200) ................ 54Ray (4225, 4228, 42214, NS422) .................. 55Ray (4235, 4238, 42314, NS423) .................. 56Ray (4295, 4298, 42914) .............................. 57Ray (42233-37200, 42333-37200) ................. 58Sidekick (701, 701A, 703, 703A) ................... 59Sidekick (702, 702A, 704, 704A) ................... 60Sierra (8526, 85250) ..................................... 61Sierra (8536, 85350) ..................................... 62Stools (5911, 5931, 5951) ............................. 63Tech (1435, 1437, 1438, 14314).................... 64Tech (1445, 1447, 14448, 14414).................. 65Tech (14333-37200, 14433-37200) ................ 66Tuxedo (4515, 4518, 45114, 45115, NS451) ... 67Tuxedo (4535, 4538, 45314, 45315, NS453) ... 68Tuxedo (4585, 4588, 45814) .......................... 69Verte (22011, 22111, 22305) ......................... 70Wink (380, 390) ............................................ 71Wink (3925, 3928, 39214, NS392, 380) ........ 72Wink (3935, 3938, 39314, NS393, 390) ........ 73
GENERALFlame Retardant Program ................................. 74ESD Discharge Option ..................................... 74 Product Warranty ............................................ 75Warranty Request ........................................... 76C.O.M. Fabric Instructions ............................... 77C.O.M. Order Form ........................................ 77Fabric Options ............................................78-79Control Options ..........................................80-81Seat Height Chart .......................................82-83How to Order/Contact Information ................... 84Specialty Options ............................................ 85Standard Options............................................ 86
Effective Date: June 1, 2014
2 www.rfmseating.com
Q U I C K S H I P ECHELON 1 9 0 0
Arm B C D E F G L (com) (col)
Arm B C D E F G L (com) (col)
Arm Options
Arm Options
MED IUM BACK Multi-function 05 control, ratchet back, seat slider
MED IUM BACK Multi-function 05 control, ratchet back, seat slider
Armless 512
08A 640
25A 622
37A 665
Armless 512
08A 640
25A 622
37A 665
Arm B
Arm B
1915Q Task
1925Q Task
QU
ICK
SHIP
48 H
OURS
OR
LESS
STAN
DARD
FEA
TURE
S n 1900 comfort molded foam tractor seatn 300 lb. weight limit n 27” high hub basen 60mm dual castersn Defined contoured lumbar arean Height adjustable, breathable mesh backn Meets CAL 117n Standard seat height approx. range for
model pictured (floor to top of seat): 18 1/2” to 21 3/4” (with 1101 cylinder)*
back width19 1/2”
seat width21”
backheight
20”
seat depth19”
Model 1915
STAN
DARD
FEA
TURE
S n 300 lb. weight limit n 27” high hub basen 60mm dual castersn Defined contoured lumbar arean Height adjustable, breathable mesh backn Meets CAL 117n Standard seat height approx. range for
model pictured (floor to top of seat): 19” to 22 1/4” (with 1101 cylinder)*
back width19 1/2”
seat width19 1/2”
backheight
20”
seat depth17 1/2”
Model 1925
Casters and arms are the only options available on Quick Ship chairs. See pages 85-86 for details.
Please note: add one day of production for every 25 chairs ordered.
Cross CheckOtterImperialVermillionSlate BlackPlatinum
FoundationAngoraFossilCoffee BeanMercuryEbonyNavyGoose
MainframePebble CordovanTruffleBay Blue
MogulsNavyWaterfallOnyxGraphiteVerdantFlareJava
One Two ThreeSweet PotatoStormMonacoTaupeFlare
WiggleOtterFlareSweet PotatoThunderBasilMonaco
QUIC
KSHI
P Fa
bri
c
3www.rfmseating.com
STAN
DARD
FEA
TURE
S n 300 lb. weight limit n 27” high hub basen 60mm dual castersn Defined contoured lumbar arean Height adjustable, breathable mesh backn Meets CAL 117n Standard seat height approx. range for
model pictured (floor to top of seat): 19” to 22 1/4” (with 1101 cylinder)*
back width21”
seat width21 1/2”
backheight
24”
seat depth18”
Model 1945
back width21”
seat width21”
backheight
24”
seat depth19”ST
ANDA
RD F
EATU
RES n 1900 comfort molded foam tractor seat
n 300 lb. weight limit n 27” high hub basen 60mm dual castersn Defined contoured lumbar arean Height adjustable, breathable mesh backn Meets CAL 117n Standard seat height approx. range for
model pictured (floor to top of seat): 18 1/2” to 21 3/4” (with 1101 cylinder)*
Model 1935
Q U I C K S H I P ECHELON 1 9 0 0
Arm B C D E F G L (com) (col)
Arm B C D E F G L (com) (col)
Arm Options
Arm Options
MANAGERS H IGH BACK Multi-function 05 control, ratchet back, seat slider
MANAGERS H IGH BACK Multi-function 05 control, ratchet back, seat slider
Armless 533
08A 661
25A 643
37A 686
Armless 533
08A 661
25A 643
37A 686
Arm B
Arm B
1935Q Task
1945Q Task
Casters and arms are the only options available on Quick Ship chairs. See pages 85-86 for details.
Please note: add one day of production for every 25 chairs ordered.
QU
ICK
SHIP
48 H
OURS
OR
LESS
4 www.rfmseating.com
Q U I C K S H I P ECHELON 1 9 0 0
Arm B C D E F G L (com) (col)
Arm B C D E F G L (com) (col)
Arm Options
Arm Options
MED IUM BACK Multi-function 05 control, ratchet back, seat slider
MANAGERS H IGH BACK Multi-function 05 control, ratchet back, seat slider
Armless 586
08A 714
25A 696
37A 739
Armless 607
08A 735
25A 717
37A 760
Arm Standard
Arm Standard
1955Q Task
1965Q Task
Casters and arms are the only options available on Quick Ship chairs. See pages 85-86 for details.
back width21”
seat width20”
seat depth19 3/4”ST
ANDA
RD F
EATU
RES n Breathable mesh seat
n 300 lb. weight limit n 27” high hub basen 60mm dual castersn Defined contoured lumbar arean Height adjustable, breathable mesh backn Meets CAL 117n Standard seat height approx. range for
model pictured (floor to top of seat): 19” to 22 1/4” (with 1101 cylinder)*
Model 1955
STAN
DARD
FEA
TURE
S n Breathable mesh seat n 300 lb. weight limit n 27” high hub basen 60mm dual castersn Defined contoured lumbar arean Height adjustable, breathable mesh backn Meets CAL 117n Standard seat height approx. range for
model pictured (floor to top of seat): 19” to 22 1/4” (with 1101 cylinder)*
back width21”
seat width20”
backheight
24”
backheight
20”
seat depth19 3/4”
Model 1965
QU
ICK
SHIP
48 H
OURS
OR
LESS
5www.rfmseating.com
STAN
DARD
FEA
TURE
S n 27” High hub base standardn Accommodates up to 300 lbs.n Comfort molded foam tractor seatn Meets CAL 117n Standard seat height approx. range
(floor to top of seat) for model pictured: 18 3/4” to 23”
back width19”
seat width19 1/2”
backheight19 1/2”
seat depth19”
Model 160
Features on the Essentials are standard and additional options are not available.
Q U I C K S H I P ESSENTIALS 1 6 0
Arm B C D E F G L (com) (col)
Arm B C D E F G L (com) (col)
Arm Options
Arm Options
BLACK SWIVEL Simple syncro up/down arm rest w/seat slider
BLACK SWIVEL Simple syncro up/down arm rest
448
508
160Q Task
161Q Task
Standard black air mesh
Standard black air mesh
STAN
DARD
FEA
TURE
S n 27” base standardn Accommodates up to 300 lbs.n Adjustable lumbar support has a 4”
vertical range to support all back sizesn High density, highly resilient seat
cushion foamn Meets CAL 117n Standard seat height approx. range
(floor to top of seat) for model pictured: 18 3/4” to 22 3/4”
back width22 1/2”
seat width21 1/4”
backheight
27”
seat depth19 3/4”
Model 161
Features on the Essentials are standard and additional options are not available.
n #68HR Black leather headrest 95
Model 161 and 162
ESSE
NTIA
LSPO
PULA
R OP
TION
S
QU
ICK
SHIP
48 H
OURS
OR
LESS
6 www.rfmseating.com
Model 162
STAN
DARD
FEA
TURE
S n 27” base standardn Accommodates up to 300 lbs.n Adjustable lumbar support has a 4”
vertical range to support all back sizesn High density, highly resilient seat cushion
foamn Meets CAL 117n Standard seat height approx. range for
model pictured (floor to top of seat): 19 1/2” to 22 1/4”
seat width21”
backheight
27”
seat depth19”
Features on the Essentials are standard and additional options are not available.
back width22 1/2”
Arm B C D E F G L (com) (col)Arm Options
BLACK SWIVEL 2:1 knee syncro, multi-function arm rest with four position adjustments, headrest available, chair locks into 5 different positions within the full tilt range
624
162Q Task Standard black leather
Q U I C K S H I P ESSENTIALS 1 6 0
Arm B C D E F G L (com) (col)Arm Options
MESH-ON-MESH SWIVEL Multi-function arm rest with four position adjustments, forward pivot syncro 14 control with seat slider
656
167Q Task
STAN
DARD
FEA
TURE
S n 27” high hub base standardn Accommodates up to 300 lbs.n Mesh seat and backn Adjustable lumbar support provides a 3 1/2”
vertical range to support all back sizesn Padded waterfall front edgen Meets CAL 117 and CAL 133n Standard seat height approx. range for model
pictured (floor to top of seat): 18 3/4” to 21 1/4”
Model 167
back width21”
seat width21 1/2”
backheight23 1/2”
seat depth20”
Features on the Essentials are standard and additional options are not available.
Standard black mesh
n #68HR Black leather headrest 95
Model 161 and 162
ESSE
NTIA
LSPO
PULA
R OP
TION
S
QU
ICK
SHIP
48 H
OURS
OR
LESS
7www.rfmseating.com
STAN
DARD
FEA
TURE
S n Accommodates up to 350 lbs.n Welded steel framen Fully upholstered seat and backn Completely assembledn Ganging capability; stacks 8 highn Standard seat height: 17 1/2”
back width18 1/2”
seat width20 1/2”
backheight
14”
seat depth19 1/2”
Model 9961
Q U I C K S H I P FURY 9 9 0 0
Arm B C D E F G L (com) (col)Arm Options
Stacking side chair with arms, stick legs 315
9961AQ GUEST LOBBY B QU
ICK
SHIP
48 H
OURS
OR
LESS
Cross CheckOtterImperialVermillionSlate BlackPlatinum
FoundationAngoraFossilCoffee BeanMercuryEbonyNavyGoose
MainframePebble CordovanTruffleBay Blue
MogulsNavyWaterfallOnyxGraphiteVerdantFlareJava
One Two ThreeSweet PotatoStormMonacoTaupeFlare
WiggleOtterFlareSweet PotatoThunderBasilMonaco
QUIC
KSHI
P Fa
bri
c
8 www.rfmseating.com
Q U I C K S H I P INTERNET 4 8 0 0
Arm B C D E F G L (com) (col)
Arm B C D E F G L (com) (col)
Arm Options
Arm Options
MED IUM BACKMulti-function 04-control with seat slider
MANAGERS H IGH BACKMulti-function 04-control with seat slider
Armless 608
08A 736
25A 718
37A 761
Armless 640
08A 768
25A 750
37A 793
Arm B
Arm B
4814Q Task
4834Q Task
Casters and arms are the only options available on Quick Ship chairs. See pages 85-86 for details.
Please note: add one day of production for every 25 chairs ordered.
QU
ICK
SHIP
48 H
OURS
OR
LESS
STAN
DARD
FEA
TURE
S
Casters and arms are the only options available on Quick Ship chairs. See pages 85-86 for details.
n 300 lb. weight limitn 55mm dual hooded black castersn Meets CAL 117n 25” nylon basen Standard seat height approx. range
for model pictured (floor to top of seat): 19” to 22 1/2” (with 100mm cylinder)
backheight
18”
back width19”
seat depth19”
seat width20”
Model 4814
Casters and arms are the only options available on Quick Ship chairs. See pages 85-86 for details.
STAN
DARD
FEA
TURE
S n 300 lb. weight limitn 55mm dual hooded black castersn Meets CAL 117n 27” nylon basen Standard seat height approx. range
for model pictured (floor to top of seat): 19 1/4” to 22 3/4” (with 100mm cylinder)
backheight
23”
back width19 1/2”
seat depth19”
seat width20”
Model 4834
Cross CheckOtterImperialVermillionSlate BlackPlatinum
FoundationAngoraFossilCoffee BeanMercuryEbonyNavyGoose
MainframePebble CordovanTruffleBay Blue
MogulsNavyWaterfallOnyxGraphiteVerdantFlareJava
One Two ThreeSweet PotatoStormMonacoTaupeFlare
WiggleOtterFlareSweet PotatoThunderBasilMonaco
QUIC
KSHI
P Fa
bri
c
9www.rfmseating.com
Q U I C K S H I P LINK 1 5 0
Arm B C D E F G L (com) (col)Arm Options
Nesting side chair 290
B 150Q Guest Lobby
STAN
DARD
FEA
TURE
S
O P T I O N S
STAN
DARD
FEA
TURE
S
O P T I O N S No additional options available for this chair
n 300 lb. weight limit n Mesh backn Round heavy gauge 1 1/8”
diameter tubular steel framen Meets CAL 117n Comes with non-marring glides
and castersn Standard seat height approx.
(floor to top of seat): 18”Does not stack
backheight15 1/2”
back width18 1/2”
seat depth17”
seat width16 1/2”
Model 150
QU
ICK
SHIP
48 H
OURS
OR
LESS
10 www.rfmseating.com
Q U I C K S H I P RAINIER 3 6 0 0
Arm B C D E F G L (com) (col)
Arm B C D E F G L (com) (col)
Arm Options
Arm Options
MED IUM BACK Multi-function 05 control, ratchet back, seat slider
MANAGERS H IGH BACK Multi-function 05 control, ratchet back, seat slider
Standard 25A 606
Armless 523
Standard 25A 654
Armless 571
Arm B
Arm B
R2Q Task
R4Q Task
Other arms and caster options are now available on Rainier series chairs. See pages 85-86 for details.
STAN
DARD
FEA
TURE
S n 300 lb. weight limitn Ratchet backn Thoracic lumbar supportn 55 mm dual hooded black castersn Multi-function controln Meets CAL 117n 25” nylon basen Standard seat height approx. range for
model pictured (floor to top of seat): 19 1/4” to 22 3/4” (with 100mm cylinder)
seat width19 1/2”
seat depth17 1/2”
back width17 1/2”
back height19 1/2”
Model R2
Other arms and caster options are now available on Rainier series chairs. See pages 85-86 for details.
STAN
DARD
FEA
TURE
S n 300 lb. weight limitn Ratchet backn Thoracic lumbar supportn 55 mm dual hooded black castersn Multi-function controln Meets CAL 117n 27” nylon basen Standard seat height approx. range for
model pictured (floor to top of seat): 19 1/2” to 23” (with 100mm cylinder)
seat width21 1/2”
seat depth18”
back height24 1/2”
Model R4
back width19 1/2”
QU
ICK
SHIP
48 H
OURS
OR
LESS
Cross CheckOtterImperialVermillionSlate BlackPlatinum
FoundationAngoraFossilCoffee BeanMercuryEbonyNavyGoose
MainframePebble CordovanTruffleBay Blue
MogulsNavyWaterfallOnyxGraphiteVerdantFlareJava
One Two ThreeSweet PotatoStormMonacoTaupeFlare
WiggleOtterFlareSweet PotatoThunderBasilMonaco
QUIC
KSHI
P Fa
bri
c
11www.rfmseating.com
Q U I C K S H I P RAINIER 3 6 0 0
Arm B C D E F G L (com) (col)
Arm B C D E F G L (com) (col)
Arm Options
Arm Options
MED IUM BACK Multi-function 05 control, ratchet back, seat slider
MANAGERS H IGH BACK Multi-function 05 control, ratchet back, seat slider
Standard 25A 606
Armless 523
Standard 25A 654
Armless 571
Arm B
Arm B
R6Q Task
R8Q Task
Other arms and caster options are now available on Rainier series chairs. See pages 85-86 for details.
seat width21”
seat depth19”
back width17 1/2”
back height19 1/2”
STAN
DARD
FEA
TURE
S n 1900 comfort molded foam tractor seat
n 300 lb. weight limitn Ratchet backn Thoracic lumbar supportn 55 mm dual hooded black castersn Multi-function controln Meets CAL 117n 25” nylon basen Standard seat height approx. range for
model pictured (floor to top of seat): 18 3/4” to 22 1/4” (with 100mm cylinder)
Model R6
seat width21”
seat depth19”
back width19 1/2”
back height
25”
Other arms and caster options are now available on Rainier series chairs. See pages 85-86 for details.
STAN
DARD
FEA
TURE
S n 1900 comfort molded foam tractor seat n 300 lb. weight limitn Ratchet backn Thoracic lumbar supportn 55 mm dual hooded black castersn Multi-function controln Meets CAL 117n 27” nylon basen Standard seat height approx. range for
model pictured (floor to top of seat): 19” to 22 1/2” (with 100mm cylinder)
Model R8
QU
ICK
SHIP
48 H
OURS
OR
LESS
12 www.rfmseating.com
STAN
DARD
FEA
TURE
S n 300 lb. weight limitn 60mm dual castersn Meets CAL 117n 27” high hub basen Standard seat height approx. range
for model pictured (floor to top of seat): 18 1/4” to 21 1/2” (with 1101 cylinder)
backheight21 1/2”
back width19”
seat depth18 1/2”
seat width21”
Q U I C K S H I P TECH 1 4 0 0
Arm B C D E F G L (com) (col)
Arm B C D E F G L (com) (col)
Arm Options
Arm Options
MANAGERS H IGH BACKMulti-function 05 control, ratchet back, seat slider
MANAGERS H IGH BACKSynchro tilt control w/built-in seat slider and ratchet back
Armless 505
08A 633
25A 615
37A 658
Armless 505
08A 633
25A 615
37A 658
Arm B
Arm B
1435Q Task
14314Q Task
Casters and arms are the only options available on Quick Ship chairs. See pages 85-86 for details.
Please note: add one day of production for every 25 chairs ordered.
Casters and arms are the only options available on Quick Ship chairs. See pages 85-86 for details.
Model 1435
Casters and arms are the only options available on Quick Ship chairs. See pages 85-86 for details. Model 14314
STAN
DARD
FEA
TURE
S n 300 lb. weight limitn 60mm dual castersn Meets CAL 117n 27” high hub basen Standard seat height approx. range
for model pictured (floor to top of seat): 19” to 22 1/4” (with 1101 cylinder)
backheight21 1/2”
back width19”
seat depth18 1/2”
seat width21”
QU
ICK
SHIP
48 H
OURS
OR
LESS
Cross CheckOtterImperialVermillionSlate BlackPlatinum
FoundationAngoraFossilCoffee BeanMercuryEbonyNavyGoose
MainframePebble CordovanTruffleBay Blue
MogulsNavyWaterfallOnyxGraphiteVerdantFlareJava
One Two ThreeSweet PotatoStormMonacoTaupeFlare
WiggleOtterFlareSweet PotatoThunderBasilMonaco
QUIC
KSHI
P Fa
bri
c
13www.rfmseating.com
01A Fold away arm with vertical and horizontal adjustment and standard 10 pad 199
08A 3 position pivot, vertically and horizontally adjustable arm with standard 10 pad 128
23A Forward angled vertically and horizontally adjustable arm with 10 pad 125
25A Vertical and horizontal adjustable “T” arm with standard 10 pad 110
37A 4-way, multifunction, vertical and horizontal adjustment w/pad. Pads cannot be changed. 153
CARMEL 8 2 0 0
Arm B C D E F G L (com) (col)
Arm B C D E F G L (com) (col)
Arm Options
Arm Options
Armless 899 922 955 1000 1061 1158 1348
Armless 803 826 859 904 965 1062 1252
Armless 778 801 834 879 940 1037 1227
MED IUM BACK Multi-function 04-control, w/seat slider
MED IUM BACK Ratchet back, multi-function 05-control w/seat slider
MED IUM BACK Ratchet back, multi-function 08-control w/seat slider, knee tilt
MED IUM BACK Synchro tilt control w/built-in seat slider and ratchet back
MED IUM BACK Swivel tilt 07-control w/ seat slider and ratchet back
Armless 723 746 779 824 885 982 1172
Armless 803 826 859 904 965 1062 1252
Arm B C D E F G L (com) (col)
Arm B C D E F G L (com) (col)
Arm B C D E F G L (com) (col)
Arm B C D E F G L (com) (col)
Arm B C D E F G L (com) (col)
8214 Task
8215 Task
8218 Task
82114 Task
NS821 Task
STAN
DARD
FEA
TURE
S
O P T I O N S See pages 85-86 for additional options
Model 8215
back width19”
seat width20”
backheight
21”
seat depth19”
n Upholstered outback standard with black air knit fabric
n 25” nylon resin basen 55mm dual hooded black castersn 300 lb. weight limitn Meets CAL 117n Thoracic ridgen Standard seat height approx. range for
model pictured (floor to top of seat): 19” to 22 1/2” (with 100mm cylinder)
SEAT
SIZ
E OP
TION
S LIST PRICE480 Small
18 1/2 w x 17 1/2 d N/C484 Large
21 w x 20 d N/C490 X-Large
23 w x 21 d N/C1100 X-Small Tractor
19 3/4 w x 19 3/4 d 50
LIST PRICE1200 Small Tractor
22 w x 19 3/4 d 501300 Medium Tractor
22 1/2 w x 20 1/4 d 501500 Deep Tractor
24 1/4 w x 19 3/4 d 1501900 Tractor
21 w x 19 d N/C
CARM
ELPO
PULA
R OP
TION
S
n #77P Soft Gel pad 58n #25F R Foam 75n #60L Air lumbar 125n #65HR Articulating
headrest 316
14 www.rfmseating.com
01A Fold away arm with vertical and horizontal adjustment and standard 10 pad 199
08A 3 position pivot, vertically and horizontally adjustable arm with standard 10 pad 128
23A Forward angled vertically and horizontally adjustable arm with 10 pad 125
25A Vertical and horizontal adjustable “T” arm with standard 10 pad 110
37A 4-way, multifunction, vertical and horizontal adjustment w/pad. Pads cannot be changed. 153
CARMEL 8 2 0 0
Arm B C D E F G L (com) (col)
Arm B C D E F G L (com) (col)
Arm Options
Arm Options
Armless 940 963 996 1041 1102 1199 1389
Armless 844 867 900 945 1006 1103 1293
Armless 819 842 875 920 981 1078 1268
MANAGERS H IGH BACK Multi-function 04-control w/seat slider
MANAGERS H IGH BACK Ratchet back, multi-function 05-control w/seat slider
MANAGERS H IGH BACK Ratchet back, multi-function 08-control w/seat slider, knee tilt
MANAGERS H IGH BACK Synchro tilt control w/built-in seat slider and ratchet back
MANAGERS H IGH BACK Swivel tilt 07-control w/ seat slider and ratchet back
Armless 764 787 820 865 926 1023 1213
Armless 844 867 900 945 1006 1103 1293
Arm B C D E F G L (com) (col)
Arm B C D E F G L (com) (col)
Arm B C D E F G L (com) (col)
Arm B C D E F G L (com) (col)
Arm B C D E F G L (com) (col)
8234 Task
8235 Task
8238 Task
82314 Task
NS823 Task
STAN
DARD
FEA
TURE
S
O P T I O N S See pages 85-86 for additional options
n Upholstered outback standard with black air knit fabric
n 27” nylon resin basen 55mm dual hooded black castersn 300 lb. weight limitn Meets CAL 117n Thoracic ridgen Standard seat height approx. range for
model pictured (floor to top of seat): 19 1/4” to 22 3/4” (with 100mm cylinder)
back width19”
seat width20”
backheight
25”
seat depth19”
Model 8235
CARM
ELPO
PULA
R OP
TION
S
n #77P Soft Gel pad 58n #25F R Foam 75n #60L Air lumbar 125n #65HR Articulating
headrest 316
SEAT
SIZ
E OP
TION
S LIST PRICE480 Small
18 1/2 w x 17 1/2 d N/C484 Large
21 w x 20 d N/C490 X-Large
23 w x 21 d N/C1100 X-Small Tractor
19 3/4 w x 19 3/4 d 50
LIST PRICE1200 Small Tractor
22 w x 19 3/4 d 501300 Medium Tractor
22 1/2 w x 20 1/4 d 501500 Deep Tractor
24 1/4 w x 19 3/4 d 1501900 Tractor
21 w x 19 d N/C
15www.rfmseating.com
01A Fold away arm with vertical and horizontal adjustment and standard 10 pad 199
08A 3 position pivot, vertically and horizontally adjustable arm with standard 10 pad 128
23A Forward angled vertically and horizontally adjustable arm with 10 pad 125
25A Vertical and horizontal adjustable “T” arm with standard 10 pad 110
37A 4-way, multifunction, vertical and horizontal adjustment w/pad. Pads cannot be changed. 153
CARMEL 8 2 0 0
Arm B C D E F G L (com) (col)
Arm B C D E F G L (com) (col)
Arm Options
Arm Options
Armless 1112 1142 1181 1245 1327 1453 1671
Armless 1016 1046 1085 1149 1231 1357 1575
Armless 991 1021 1060 1124 1206 1332 1550
EXECUT IVE H IGH BACK w/pillow, multi-function 04-control w/seat slider
EXECUT IVE H IGH BACK w/pillow, ratchet back, multi-function 05-control w/seat slider
EXECUT IVE H IGH BACK w/pillow, ratchet back, multi-function 08-control w/seat slider, knee tilt
EXECUT IVE H IGH BACK w/pillow, synchro tilt control w/built-in seat slider and ratchet back
EXECUT IVE H IGH BACK w/pillow, swivel tilt 07-control w/ seat slider and ratchet back
Armless 936 966 1005 1069 1151 1277 1495
Armless 1016 1046 1085 1149 1231 1357 1575
Arm B C D E F G L (com) (col)
Arm B C D E F G L (com) (col)
Arm B C D E F G L (com) (col)
Arm B C D E F G L (com) (col)
Arm B C D E F G L (com) (col)
8294 Task
8295 Task
8298 Task
82914 Task
NS829 Task
STAN
DARD
FEA
TURE
S
O P T I O N S See pages 85-86 for additional options
n Upholstered outback standard with black air knit fabric
n 27” nylon resin basen 55mm dual hooded black castersn 300 lb. weight limitn Meets CAL 117n Thoracic ridgen Standard seat height approx. range for
model pictured (floor to top of seat): 18 3/4” to 22 1/4” (with 100mm cylinder)
back width19 3/4”
seat width21”
backheight32 1/2”
seat depth20”
Model 8295
CARM
ELPO
PULA
R OP
TION
S
n #77P Soft Gel pad 58n #25F R Foam 75n #60L Air lumbar 125
SEAT
SIZ
E OP
TION
S LIST PRICE480 Small
18 1/2 w x 17 1/2 d N/C482 Medium
20 w x 19 d N/C490 X-Large
23 w x 21 d N/C1100 X-Small Tractor
19 3/4 w x 19 3/4 d 50
LIST PRICE1200 Small Tractor
22 w x 19 3/4 d 501300 Medium Tractor
22 1/2 w x 20 1/4 d 501500 Deep Tractor
24 1/4 w x 19 3/4 d 1501900 Tractor
21 w x 19 d N/C
16 www.rfmseating.com
CARMEL 8 2 0 0
Arm B C D E F G L (com) (col)Arm Options
Armless 898 921 954 999 1060 1157 1347
MED IUM BACK STOOLTri-action 03-control
MED IUM BACK STOOLRatchet back, tri-action 33-control
Armless 818 841 874 919 980 1077 1267
Arm B C D E F G L (com) (col)
Arm B C D E F G L (com) (col)
8213-37200 Stool
82133-37200 Stool
Arm B C D E F G L (com) (col)Arm Options
Armless 859 882 915 960 1021 1118 1308MANAGERS H IGH BACK STOOLTri-action 03-control
MANAGERS H IGH BACK STOOLRatchet back, tri-action 33-control
Armless 939 962 995 1040 1101 1198 1388
Arm B C D E F G L (com) (col)
Arm B C D E F G L (com) (col)8233-37200 Stool
82333-37200 Stool
O P T I O N S See pages 85-86 for additional optionsModel 82133-37200
NOTE: please specify stool kit 37200 or 37270
NOTE: please specify stool kit 37200 or 37270
O P T I O N S See pages 85-86 for additional optionsModel 82333-37200
n #33SS Seat slider 50
n #25F R Foam 75
n #77P Soft Gel pad 58
n #60L Air lumbar 125
n #16B Foot ring base N/Cw/60mm no hood caster. Only available in 175mm or 200mm cylinder
STOO
LSPO
PULA
R OP
TION
S
SEAT
SIZ
E OP
TION
S LIST PRICE480 Small
18 1/2 w x 17 1/2 d N/C484 Large
21 w x 20 d N/C490 X-Large
23 w x 21 d N/C
LIST PRICE1100 X-Small Tractor
19 3/4 w x 19 3/4 d 501200 Small Tractor
22 w x 19 3/4 d 501300 Medium Tractor
22 1/2 w x 20 1/4 d 501900 Tractor
21 w x 19 d N/C
For 31” - 39” counter heights - request 200 mm cylinder
For 34” - 44” counter heights - request 270 mm cylinder
STAN
DARD
FEA
TURE
S back width19”
seat width20”
backheight
21”
seat depth19”
n Upholstered outback standard with black air knit fabric
n 27” nylon resin basen 55mm dual hooded black castersn 300 lb. weight limitn Meets CAL 117n Thoracic ridgen Footring w/heavy duty sleeven Standard seat height approx. range for
model pictured: 25” to 32”
STAN
DARD
FEA
TURE
S n Upholstered outback standard with black air knit fabric
n 27” nylon resin basen 55mm dual hooded black castersn 300 lb. weight limitn Meets CAL 117n Thoracic ridgen Footring w/heavy duty sleeven Standard seat height approx. range for
model pictured: 25” to 32”
back width19”
seat width20”
backheight
25”
seat depth19”
17www.rfmseating.com
01A Fold away arm with vertical and horizontal adjustment and standard 10 pad 199
08A 3 position pivot, vertically and horizontally adjustable arm with standard 10 pad 128
23A Forward angled vertically and horizontally adjustable arm with 10 pad 125
25A Vertical and horizontal adjustable “T” arm with standard 10 pad 110
37A 4-way, multifunction, vertical and horizontal adjustment w/pad. Pads cannot be changed. 153
ECHELON 1 9 0 0
Arm B C D E F G L (com) (col)
Arm B C D E F G L (com) (col)
Arm Options
Arm Options
Armless 608 631 664 709 770 867 1057
09A 612 635 668 713 774 871 1061
MED IUM BACK Multi-function 05 control, ratchet back, seat slider
MED IUM BACK Conference chair, swivel tilt 07 control, ratchet back w/seat slider and reverse C-arm
MED IUM BACK Ratchet back, multi-function 08-control w/seat slider, knee tilt
MED IUM BACK Synchro tilt control w/built-in seat slider and ratchet back
Armless 512 535 568 613 674 771 961
Armless 512 535 568 613 674 771 961
Arm B C D E F G L (com) (col)
Arm B C D E F G L (com) (col)
Arm B C D E F G L (com) (col)
Arm B C D E F G L (com) (col)
1915 Task
1917 Conference
1918 Task
19114 Task
STAN
DARD
FEA
TURE
S
O P T I O N S See pages 85-86 for additional options
n 1900 comfort molded foam tractor seatn 300 lb. weight limit n 27” high hub basen 60mm dual castersn Defined contoured lumbar arean Height adjustable, breathable mesh backn Meets CAL 117n Standard seat height approx. range for
model pictured (floor to top of seat): 18 1/2” to 21 3/4” (with 1101 cylinder)*
back width19 1/2”
seat width21”
backheight
20”
seat depth19”
Model 1915
SEAT
SIZ
E OP
TION
S LIST PRICE1100 X-Small Tractor
19 3/4 w x 19 3/4 d 501200 Small Tractor
22 w x 19 3/4 d 501300 Medium Tractor
22 1/2 w x 20 1/4 d 501500 Deep Tractor
24 1/4 w x 19 3/4 d 150
*If your customer requires an even lower seat height, order our standard base0012 with a 65mm cylinder for a seat range of 17” to 19.75”; or order our standard base0012 with a 70mm cylinder for a seat range of 18.25” to 20.75”.
No ESD, Multi-shift options or Bariatric models
18 www.rfmseating.com
*If your customer requires an even lower seat height, order our standard base0012 with a 65mm cylinder for a seat range of 17.5” to 20.25”; or order our standard base0012 with a 70mm cylinder for a seat range of 18.75” to 21.25.
SEAT
SIZ
E OP
TION
S LIST PRICE363 Medium
21 1/2 w x 18 d N/C673 Large
22 w x 20 d N/C
01A Fold away arm with vertical and horizontal adjustment and standard 10 pad 199
08A 3 position pivot, vertically and horizontally adjustable arm with standard 10 pad 128
23A Forward angled vertically and horizontally adjustable arm with 10 pad 125
25A Vertical and horizontal adjustable “T” arm with standard 10 pad 110
37A 4-way, multifunction, vertical and horizontal adjustment w/pad. Pads cannot be changed. 153
ECHELON 1 9 0 0
Arm B C D E F G L (com) (col)
Arm B C D E F G L (com) (col)
Arm Options
Arm Options
Armless 608 631 664 709 770 867 1057
09A 612 635 668 713 774 871 1061
MED IUM BACK Multi-function 05 control, ratchet back, seat slider
MED IUM BACK Conference chair, swivel tilt 07 control, ratchet back w/seat slider and reverse C-arm
MED IUM BACK Ratchet back, multi-function 08-control w/seat slider, knee tilt
MED IUM BACK Synchro tilt control w/built-in seat slider and ratchet back
Armless 512 535 568 613 674 771 961
Armless 512 535 568 613 674 771 961
Arm B C D E F G L (com) (col)
Arm B C D E F G L (com) (col)
Arm B C D E F G L (com) (col)
Arm B C D E F G L (com) (col)
1925 Task
1927 Conference
1928 Task
19214 Task
seat width19 1/2”
backheight
20”
seat depth17 1/2”ST
ANDA
RD F
EATU
RES
O P T I O N S See pages 85-86 for additional options
n 300 lb. weight limit n 27” high hub basen 60mm dual castersn Defined contoured lumbar arean Height adjustable, breathable mesh backn Meets CAL 117n Standard seat height approx. range for
model pictured (floor to top of seat): 19” to 22 1/4” (with 1101 cylinder)*
Model 1925
back width19 1/2”
No ESD, Multi-shift options or Bariatric models
19www.rfmseating.com
01A Fold away arm with vertical and horizontal adjustment and standard 10 pad 199
08A 3 position pivot, vertically and horizontally adjustable arm with standard 10 pad 128
23A Forward angled vertically and horizontally adjustable arm with 10 pad 125
25A Vertical and horizontal adjustable “T” arm with standard 10 pad 110
37A 4-way, multifunction, vertical and horizontal adjustment w/pad. Pads cannot be changed. 153
ECHELON 1 9 0 0
Arm B C D E F G L (com) (col)
Arm B C D E F G L (com) (col)
Arm Options
Arm Options
Armless 629 652 685 730 791 888 1078
09A 633 656 689 734 795 892 1082
MANAGERS H IGH BACK Multi-function 05 control, ratchet back, seat slider
MANAGERS H IGH BACK Conference chair, swivel tilt 07 control, ratchet back w/seat slider and reverse C-arm
MANAGERS H IGH BACK Ratchet back, multi-function 08-control w/seat slider, knee tilt
MANAGERS H IGH BACK Synchro tilt control w/built-in seat slider and ratchet back
Armless 533 556 589 634 695 792 982
Armless 533 556 589 634 695 792 982
Arm B C D E F G L (com) (col)
Arm B C D E F G L (com) (col)
Arm B C D E F G L (com) (col)
Arm B C D E F G L (com) (col)
1935 Task
1937 Conference
1938 Task
19314 Task
SEAT
SIZ
E OP
TION
S LIST PRICE1100 X-Small Tractor
19 3/4 w x 19 3/4 d 501200 Small Tractor
22 w x 19 3/4 d 501300 Medium Tractor
22 1/2 w x 20 1/4 d 501500 Deep Tractor
24 1/4 w x 19 3/4 d 150
*If your customer requires an even lower seat height, order our standard base0013 with a 65mm cylinder for a seat range of 16.625” to 19.375”; or order our standard base0013 with a 70mm cylinder for a seat range of 18.375” to 20.875”.
STAN
DARD
FEA
TURE
S
O P T I O N S See pages 85-86 for additional options
n 1900 comfort molded foam tractor seatn 300 lb. weight limit n 27” high hub basen 60mm dual castersn Defined contoured lumbar arean Height adjustable, breathable mesh backn Meets CAL 117n Standard seat height approx. range for
model pictured (floor to top of seat): 18 1/2” to 21 3/4” (with 1101 cylinder)*
back width21”
seat width21”
backheight
24”
seat depth19”
Model 1935No ESD, Multi-shift options or Bariatric models
20 www.rfmseating.com
*If your customer requires an even lower seat height, order our standard base0013 with a 65mm cylinder for a seat range of 17.125” to 19.875”; or order our standard base0013 with a 70mm cylinder for a seat range of 18.875” to 21.375”.
SEAT
SIZ
E OP
TION
S LIST PRICE362 Small
19 1/2 w x 17 1/2 d N/C673 Large
22 w x 20 d N/C
01A Fold away arm with vertical and horizontal adjustment and standard 10 pad 199
08A 3 position pivot, vertically and horizontally adjustable arm with standard 10 pad 128
23A Forward angled vertically and horizontally adjustable arm with 10 pad 125
25A Vertical and horizontal adjustable “T” arm with standard 10 pad 110
37A 4-way, multifunction, vertical and horizontal adjustment w/pad. Pads cannot be changed. 153
ECHELON 1 9 0 0
Arm B C D E F G L (com) (col)
Arm B C D E F G L (com) (col)
Arm Options
Arm Options
Armless 629 652 685 730 791 888 1078
09A 633 656 689 734 795 892 1082
MANAGERS H IGH BACK Multi-function 05 control, ratchet back, seat slider
MANAGERS H IGH BACK Conference chair, swivel tilt 07 control, ratchet back w/seat slider and reverse C-arm
MANAGERS H IGH BACK Ratchet back, multi-function 08-control w/seat slider, knee tilt
MANAGERS H IGH BACK Synchro tilt control w/built-in seat slider and ratchet back
Armless 533 556 589 634 695 792 982
Armless 533 556 589 634 695 792 982
Arm B C D E F G L (com) (col)
Arm B C D E F G L (com) (col)
Arm B C D E F G L (com) (col)
Arm B C D E F G L (com) (col)
1945 Task
1947 Conference
1948 Task
19414 Task
STAN
DARD
FEA
TURE
S
O P T I O N S See pages 85-86 for additional options
n 300 lb. weight limit n 27” high hub basen 60mm dual castersn Defined contoured lumbar arean Height adjustable, breathable mesh backn Meets CAL 117n Standard seat height approx. range for
model pictured (floor to top of seat): 19” to 22 1/4” (with 1101 cylinder)*
seat width21 1/2”
backheight
24”
seat depth18”
Model 1945
back width21”
No ESD, Multi-shift options or Bariatric models
21www.rfmseating.com
01A Fold away arm with vertical and horizontal adjustment and standard 10 pad 199
08A 3 position pivot, vertically and horizontally adjustable arm with standard 10 pad 128
23A Forward angled vertically and horizontally adjustable arm with 10 pad 125
25A Vertical and horizontal adjustable “T” arm with standard 10 pad 110
37A 4-way, multifunction, vertical and horizontal adjustment w/pad. Pads cannot be changed. 153
ECHELON 1 9 0 0
Arm B C D E F G L (com) (col)
Arm B C D E F G L (com) (col)
Arm Options
Arm Options
Armless 682
09A 686
MED IUM H IGH BACK Multi-function 05 control, ratchet back, seat slider
MED IUM H IGH BACK Conference chair, swivel tilt 07 control, ratchet back w/seat slider and reverse C-arm
MED IUM H IGH BACK Ratchet back, multi-function 08-control w/seat slider, knee tilt
MED IUM H IGH BACK Synchro tilt control w/built-in seat slider and ratchet back
Armless 586
Armless 586
Arm Standard black air mesh
Arm Standard
Arm Standard
Arm Standard
1955 Task
1957 Conference
1958 Task
19514 Task
*If your customer requires an even lower seat height, order our standard base0012 with a 65mm cylinder for a seat range of 17.5” to 20.25”; or order our standard base0012 with a 70mm cylinder for a seat range of 18.75” to 21.25”.
STAN
DARD
FEA
TURE
S
O P T I O N S See pages 85-86 for additional options
n Breathable mesh seat n 300 lb. weight limit n 27” high hub basen 60mm dual castersn Defined contoured lumbar arean Height adjustable, breathable mesh backn Meets CAL 117n Standard seat height approx. range for
model pictured (floor to top of seat): 19” to 22 1/4” (with 1101 cylinder)*
back width19 1/2”
seat width20”
backheight
20”
seat depth19 3/4”
Model 1955No ESD, Multi-shift options or Bariatric models
22 www.rfmseating.com
*If your customer requires an even lower seat height, order our standard base0013 with a 65mm cylinder for a seat range of 17.125” to 19.875”; or order our standard base0013 with a 70mm cylinder for a seat range of 18.875” to 21.375”.
01A Fold away arm with vertical and horizontal adjustment and standard 10 pad 199
08A 3 position pivot, vertically and horizontally adjustable arm with standard 10 pad 128
23A Forward angled vertically and horizontally adjustable arm with 10 pad 125
25A Vertical and horizontal adjustable “T” arm with standard 10 pad 110
37A 4-way, multifunction, vertical and horizontal adjustment w/pad. Pads cannot be changed. 153
ECHELON 1 9 0 0
Arm B C D E F G L (com) (col)
Arm B C D E F G L (com) (col)
Arm Options
Arm Options
Armless 703
09A 707
MANAGERS H IGH BACK Multi-function 05 control, ratchet back, seat slider
MANAGERS H IGH BACK Conference chair, swivel tilt 07 control, ratchet back w/seat slider and reverse C-arm
MANAGERS H IGH BACK Ratchet back, multi-function 08-control w/seat slider, knee tilt
MANAGERS H IGH BACK Synchro tilt control w/built-in seat slider and ratchet back
Armless 607
Armless 607
Arm Standard black air mesh
Arm B
Arm B
Arm B
1965 Task
1967 Conference
1968 Task
19614 Task
STAN
DARD
FEA
TURE
S
O P T I O N S See pages 85-86 for additional options
n Breathable mesh seat n 300 lb. weight limit n 27” high hub basen 60mm dual castersn Defined contoured lumbar arean Height adjustable, breathable mesh backn Meets CAL 117n Standard seat height approx. range for
model pictured (floor to top of seat): 19” to 22 1/4” (with 1101 cylinder)*
back width21”
seat width20”
backheight
24”
seat depth19 3/4”
Model 1965No ESD, Multi-shift options or Bariatric models
23www.rfmseating.com
n #33SS Seat slider 50
n #16B Foot ring base N/Cw/60mm no hood caster. Only available in 175mm or 200mm cylinder.
SEAT
SIZ
E OP
TION
S LIST PRICE1100 X-Small Tractor
19 3/4 w x 19 3/4 d 501200 Small Tractor
22 w x 19 3/4 d 501300 Medium Tractor
22 1/2 w x 20 1/4 d 501500 Deep Tractor
24 1/4 w x 19 3/4 d 150
ECHELON 1 9 0 0
Arm B C D E F G L (com) (col)
Arm B C D E F G L (com) (col)
Arm Options
Arm Options
MED IUM BACK Multi-function 33-control, ratchet back tri-action control, 1900 comfort molded foam tractor seat
MED IUM BACK Multi-function 33-control, ratchet back tri-action control, w/flat seat
Armless 607 630 663 708 769 866 1056
Armless 607 630 663 708 769 866 1056
Arm B C D E F G L (com) (col)
Arm B C D E F G L (com) (col)
19133-37200 Stool
19233-37200 Stool
Armless 628 651 684 729 790 887 1077MANAGERS H IGH BACK Multi-function 33-control, ratchet back tri-action control, 1900 comfort molded foam tractor seat
Arm B C D E F G L (com) (col)19333-37200 Stool
Armless 628 651 684 729 790 887 1077MANAGERS H IGH BACK Multi-function 33-control, ratchet back tri-action control, w/flat seat
Arm B C D E F G L (com) (col)19433-37200 Stool
STAN
DARD
FEA
TURE
S
O P T I O N S See pages 85-86 for additional options
STAN
DARD
FEA
TURE
S
O P T I O N S See pages 85-86 for additional options (including arms)Model 19133
shown with 16 base-200mmNote: please specify stool kit 37200 or 37270
n 300 lb. weight limit n 27” high hub basen Meets CAL 117n Defined contoured lumbar arean Foot ring with heavy-duty sleeven Height adjustable, breathable
mesh backn Standard seat height approx.
range for model pictured (floor to top of seat): 28” to 35” (with 200mm cylinder)
back width19 1/2”
back width19 1/2”
1900 seat width
21”
362 foam seat width
19 1/2”
backheight
20”
backheight
20”
1900 seat depth
19”
362 foam seat depth
17 1/2”
STAN
DARD
FEA
TURE
S
O P T I O N S See pages 85-86 for additional options (including arms)
Model 19333Note: please specify stool kit 37200 or 37270
n 300 lb. weight limit n 27” high hub basen Meets CAL 117n Defined contoured lumbar arean Foot ring with heavy-duty sleeven Height adjustable, breathable
mesh backn Standard seat height approx.
range for model pictured (floor to top of seat): 26 1/4” to 33 1/4” (with 200mm cylinder)
back width21”
1900 seat width
21”
backheight
24”
1900 seat depth
19”
For 31” - 39” counter heights - request 200 mm cylinder For 34” - 44” counter heights - request 270 mm cylinder
STOO
LSPO
PULA
R OP
TION
S
back width21”
363 foam seat width
21 1/2”
backheight
24”
363 foam seat depth
18”
No ESD, Multi-shift options or Bariatric models
No ESD, Multi-shift options or Bariatric models
24 www.rfmseating.com
ESSENTIALS 1 6 0ST
ANDA
RD F
EATU
RES n 27” High hub base standard
n Accommodates up to 300 lbs.n Comfort molded foam tractor seatn Meets CAL 117n Standard seat height approx. range
(floor to top of seat) for model pictured: 18 3/4” to 23”
back width19”
seat width19 1/2”
backheight19 1/2”
seat depth19”
Model 160Features on the Essentials are standard and additional options are not available.
Arm B C D E F G L (com) (col)
Arm B C D E F G L (com) (col)
Arm Options
BLACK SWIVEL Simple syncro up/down arm rest w/seat slider
448 513 527 546 572 611 669 765
508 573 587 606 632 671 729 825
160 Task Standard B C D E F G L black air mesh (com) (col)
Standard B C D E F G L black air mesh (com) (col)
Available in QuickShip. See page 6 for details.
Available in QuickShip. See page 6 for details.
n #68HR Black leather headrest 95
Model 161 and 162
ESSE
NTIA
LSPO
PULA
R OP
TION
S
B LACK SWIVEL Simple syncro up/down arm rest
161 Task
STAN
DARD
FEA
TURE
S n 27” base standardn Accommodates up to 300 lbs.n Adjustable lumbar support has a 4”
vertical range to support all back sizesn High density, highly resilient seat
cushion foamn Meets CAL 117n Standard seat height approx. range
(floor to top of seat) for model pictured: 18 3/4” to 22 3/4”
seat width21 1/4”
backheight
27”
seat depth19 3/4”
Model 161
Features on the Essentials are standard and additional options are not available.
back width22 1/2”
25www.rfmseating.com
656
Available in QuickShip. See page 7 for details.
ESSENTIALS 1 6 0
Model 162
STAN
DARD
FEA
TURE
S n 27” base standardn Accommodates up to 300 lbs.n Adjustable lumbar support has a 4”
vertical range to support all back sizesn High density, highly resilient seat cushion
foamn Meets CAL 117n Standard seat height approx. range for
model pictured (floor to top of seat): 19 1/2” to 22 1/4”
back width22 1/2”
seat width21”
backheight
27”
seat depth19”
Features on the Essentials are standard and additional options are not available.
Arm B C D E F G L (com) (col)Arm Options
BLACK SWIVEL 2:1 knee syncro, multi-function arm rest with four position adjustments, headrest available, chair locks into 5 different positions within the full tilt range
162 Task
n #68HR Black leather headrest 95
Model 161 and 162
ESSE
NTIA
LSPO
PULA
R OP
TION
S
624 689 703 722 748 787 845 941
Standard B C D E F G L black leather (com) (col)
Available in QuickShip. See page 7 for details.
Arm B C D E F G L (com) (col)
MESH ON MESH SWIVEL multi-function arm rest with four position adjustments, forward pivot synchro 14 control
167 Task Standard black mesh
STAN
DARD
FEA
TURE
S n 27” high hub base standardn Accommodates up to 300 lbs.n Mesh seat and backn Adjustable lumbar support provides a 3 1/2”
vertical range to support all back sizesn Padded waterfall front edgen Meets CAL 117 and CAL 133n Standard seat height approx. range for model
pictured (floor to top of seat): 18 3/4” to 21 1/4”
Model 167
back width21”
seat width21 1/2”
backheight23 1/2”
seat depth20”
Features on the Essentials are standard and additional options are not available.
26 www.rfmseating.com
EVER
GREE
NPO
PULA
R OP
TION
S Bridge Table 141 23 w x 15 1/2 d
Corner Table 363Ganging Plate 87Chairs shown with a connecting black laminate corner table.
48”
18 3/4”15 1/4”15 1/4”
21 3/4”
EVERGREEN 6 0 0
Arm B C D E F G L (com) (col)
Arm B C D E F G L (com) (col)
Arm Options
Arm Options
645 668 701 746 807 904 1094
749 772 805 850 911 1008 1198
Sled base style steel frame guest chair in black powder coat, armless
Bariatric sled base style steel frame guest chair in black powder coat, armless
Sled base style steel frame guest chair in black powder coat, with urethane padded arms
Bariatric sled base style steel frame guest chair in black powder coat, with urethane padded arms
566 589 622 667 728 825 1015
670 693 726 771 832 929 1119
Arm B C D E F G L (com) (col)
Arm B C D E F G L (com) (col)
Arm B C D E F G L (com) (col)
Arm B C D E F G L (com) (col)
603 GUEST LOBBY
604 GUEST LOBBY
603A GUEST LOBBY
604A GUEST LOBBY
STAN
DARD
FEA
TURE
S
O P T I O N S
STAN
DARD
FEA
TURE
S
O P T I O N S No additional options available for this chairModel 603A
n 300 lb. weight limitn High density foam seat and backn Round heavy gauge 1 1/8”
diameter tubular steel framen Meets CAL 117n Comes with non-marring glidesn Standard seat height approx.
(floor to top of seat): 19”Does not stack
backheight
15”
back width20 1/2”
seat depth21”
seat width21”
D IMENS IONSOutside of the arm pads: 23 1/2”Top of the back to the floor: 34”
D IMENS IONSOutside of the arm pads: 30 1/2”Top of the back to the floor: 34”
STAN
DARD
FEA
TURE
S
O P T I O N S
STAN
DARD
FEA
TURE
S
O P T I O N S No additional options available for this chair
n 500 lb. weight limit n High density foam seat and backn Round heavy gauge 1 1/8”
diameter tubular steel framen Meets CAL 117n Comes with non-marring glidesn Standard seat height approx.
(floor to top of seat): 19”Does not stack
backheight
15”
seat depth22”
seat width28”
Model 604A
back width27 1/2”
604 chairs ship fully disassembled
603 chairs require back assembly
27www.rfmseating.com
FURY 9 9 0 0ST
ANDA
RD F
EATU
RES n Accommodates up to 350 lbs.
n Welded steel framen Fully upholstered seat and backn Completely assembledn Ganging capability; stacks 8 highn Standard seat height: 17 1/2”
back width18 1/2”
seat width18 1/2”
backheight17 1/2”
seat depth19 1/2”
Model 9961
Arm B C D E F G L (com) (col)
Arm B C D E F G L (com) (col)
Arm B C D E F G L (com) (col)
Arm B C D E F G L (com) (col)
Arm Options
Arm Options
Arm Options
Arm Options
Stacking side chair with arms, stick legs
Stacking side chair with arms, stick legs
Cart
Ganging Device
315 329 348 374 413 471 579
370 423 442 468 507 565 673
303
44
9961A GUEST LOBBY
9981A GUEST LOBBY
9961 Cart
M9961GB
B C D E F G L (com) (col)
B C D E F G L (com) (col)
28 www.rfmseating.com
01A Fold away arm with vertical and horizontal adjustment and standard 10 pad 199
08A 3 position pivot, vertically and horizontally adjustable arm with standard 10 pad 128
23A Forward angled vertically and horizontally adjustable arm with 10 pad 125
25A Vertical and horizontal adjustable “T” arm with standard 10 pad 110
37A 4-way, multifunction, vertical and horizontal adjustment w/pad. Pads cannot be changed. 153
INTERNET 4 8 0 0
Arm B C D E F G L (com) (col)
Arm B C D E F G L (com) (col)
Arm Options
Arm Options
Armless 784 807 840 885 946 1043 1233
Armless 688 711 744 789 850 947 1137
Armless 663 686 719 764 825 922 1112
MED IUM BACK Multi-function 04-control w/ seat slider
MED IUM BACK Ratchet back, multi-function 05-control w/seat slider
MED IUM BACK Ratchet back, multi-function 08-control w/seat slider, knee tilt
MED IUM BACK Synchro tilt control w/built-in seat slider and ratchet back
MED IUM BACK Swivel tilt 07-control and ratchet back w/seat slider
Armless 608 631 664 709 770 867 1057
Armless 688 711 744 789 850 947 1137
Arm B C D E F G L (com) (col)
Arm B C D E F G L (com) (col)
Arm B C D E F G L (com) (col)
Arm B C D E F G L (com) (col)
Arm B C D E F G L (com) (col)
4814 Task
4815 Task
4818 Task
48114 Task
NS481 Task
STAN
DARD
FEA
TURE
S
O P T I O N S See pages 85-86 for additional options
n 300 lb. weight limitn 25” nylon basen 55 mm dual hooded black castersn Meets CAL 117n Standard seat height approx. range
for model pictured (floor to top of seat): 19” to 22 1/2” (with 100mm cylinder)
backheight
18”
back width19”
seat depth19”
seat width20”
Model 4814
INTE
RNET
POPU
LAR
OPTI
ONS
n #25F R Foam 75n #77P Soft Gel pad 58n #60L Air lumbar 125n #64L Thoracic Ridge 75n #65HR Articulating
headrest 316
SEAT
SIZ
E OP
TION
S LIST PRICE480 Small
18 1/2 w x 17 1/2 d N/C484 Large
21 w x 20 d N/C490 X-Large
23 w x 21 d N/C1100 X-Small Tractor
19 3/4 w x 19 3/4 d 50
LIST PRICE1200 Small Tractor
22 w x 19 3/4 d 501300 Medium Tractor
22 1/2 w x 20 1/4 d 501500 Deep Tractor
24 1/4 w x 19 3/4 d 1501900 Molded Foam Tractor
21 w x 19 d N/C
29www.rfmseating.com
01A Fold away arm with vertical and horizontal adjustment and standard 10 pad 199
08A 3 position pivot, vertically and horizontally adjustable arm with standard 10 pad 128
23A Forward angled vertically and horizontally adjustable arm with 10 pad 125
25A Vertical and horizontal adjustable “T” arm with standard 10 pad 110
37A 4-way, multifunction, vertical and horizontal adjustment w/pad. Pads cannot be changed. 153
INTERNET 4 8 0 0
Arm B C D E F G L (com) (col)
Arm B C D E F G L (com) (col)
Arm Options
Arm Options
Armless 816 839 872 917 978 1075 1265
Armless 720 743 776 821 882 979 1169
Armless 695 718 751 796 857 954 1144
MANAGERS H IGH BACK Multi-function 04-control w/ seat slider
MANAGERS H IGH BACK Ratchet back, multi-function 05-control w/seat slider
MANAGERS H IGH BACK Ratchet back, multi-function 08-control w/seat slider, knee tilt
MANAGERS H IGH BACK Synchro tilt control w/built-in seat slider and ratchet back
MANAGERS H IGH BACK Swivel tilt 07-control and ratchet back w/seat slider
Armless 640 663 696 741 802 899 1089
Armless 720 743 776 821 882 979 1169
Arm B C D E F G L (com) (col)
Arm B C D E F G L (com) (col)
Arm B C D E F G L (com) (col)
Arm B C D E F G L (com) (col)
Arm B C D E F G L (com) (col)
4834 Task
4835 Task
4838 Task
48314 Task
NS483 Task
INTE
RNET
POPU
LAR
OPTI
ONS
n #25F R Foam 75n #77P Soft Gel pad 58n #60L Air lumbar 125n #64L Thoracic Ridge 75n #65HR Articulating
headrest 316
SEAT
SIZ
E OP
TION
S LIST PRICE480 Small
18 1/2 w x 17 1/2 d N/C484 Large
21 w x 20 d N/C490 X-Large
23 w x 21 d N/C1100 X-Small Tractor
19 3/4 w x 19 3/4 d 50
LIST PRICE1200 Small Tractor
22 w x 19 3/4 d 501300 Medium Tractor
22 1/2 w x 20 1/4 d 501500 Deep Tractor
24 1/4 w x 19 3/4 d 1501900 Molded Foam Tractor
21 w x 19 d N/C
STAN
DARD
FEA
TURE
S
O P T I O N S See pages 85-86 for additional options
n 300 lb. weight limitn 27” nylon basen 55 mm dual hooded black castersn Meets CAL 117n Standard seat height approx.
range for model pictured (floor to top of seat): 19” to 22 1/2” (with 100mm cylinder)
backheight
23”
back width19 1/2”
seat depth19”seat width
20”
Model 4834
30 www.rfmseating.com
01A Fold away arm with vertical and horizontal adjustment and standard 10 pad 199
08A 3 position pivot, vertically and horizontally adjustable arm with standard 10 pad 128
23A Forward angled vertically and horizontally adjustable arm with 10 pad 125
25A Vertical and horizontal adjustable “T” arm with standard 10 pad 110
37A 4-way, multifunction, vertical and horizontal adjustment w/pad. Pads cannot be changed. 153
INTERNET 4 8 0 0
Arm B C D E F G L (com) (col)
Arm B C D E F G L (com) (col)
Arm Options
Arm Options
Armless 1077 1107 1146 1210 1292 1418 1636
Armless 981 1011 1050 1114 1196 1322 1540
EXECUT IVE H IGH BACK w/pillow Multi-function 04-control w/ seat slider
EXECUT IVE H IGH BACK w/pillow Ratchet back, multi-function 05-control w/seat slider
EXECUT IVE H IGH BACK w/pillow Ratchet back, multi-function 08-control w/seat slider, knee tilt
EXECUT IVE H IGH BACK w/pillow Synchro tilt control w/built-in seat slider and ratchet back
Armless 901 931 970 1034 1116 1242 1460
Armless 981 1011 1050 1114 1196 1322 1540
Arm B C D E F G L (com) (col)
Arm B C D E F G L (com) (col)
Arm B C D E F G L (com) (col)
Arm B C D E F G L (com) (col)
4894 Task
4895 Task
4898 Task
48914 Task
STAN
DARD
FEA
TURE
S
O P T I O N S See pages 85-86 for additional options
n 300 lb. weight limitn 27” nylon basen 55 mm dual hooded black castersn Meets CAL 117n Standard seat height approx. range
for model pictured (floor to top of seat): 19” to 22 1/2” (with 100mm cylinder)
backheight33 1/2”
seat depth20”seat width
21”
back width19 1/2”
Model 4895
SEAT
SIZ
E OP
TION
S LIST PRICE480 Small
18 1/2 w x 17 1/2 d N/C482 Medium
20 w x 19 d N/C490 X-Large
23 w x 21 d N/C1100 X-Small Tractor
19 3/4 w x 19 3/4 d 50
LIST PRICE1200 Small Tractor
22 w x 19 3/4 d 501300 Medium Tractor
22 1/2 w x 20 1/4 d 501500 Deep Tractor
24 1/4 w x 19 3/4 d 1501900 Molded Foam Tractor
21 w x 19 d N/C
INTE
RNET
POPU
LAR
OPTI
ONS
n #25F R Foam 75n #77P Soft Gel pad 58n #60L Air lumbar 125n #64L Thoracic Ridge 75
31www.rfmseating.com
01A Fold away arm with vertical and horizontal adjustment and standard 10 pad 199
08A 3 position pivot, vertically and horizontally adjustable arm with standard 10 pad 128
23A Forward angled vertically and horizontally adjustable arm with 10 pad 125
25A Vertical and horizontal adjustable “T” arm with standard 10 pad 110
37A 4-way, multifunction, vertical and horizontal adjustment w/pad. Pads cannot be changed. 153
INTERNET 4 8 0 0
Arm B C D E F G L (com) (col)Arm Options
Armless 783 806 839 884 945 1042 1232
MED IUM BACK STOOLTri-action 03-control
MED IUM BACK STOOLRatchet back, tri-action 33-control
Armless 703 726 759 804 865 962 1152
Arm B C D E F G L (com) (col)
Arm B C D E F G L (com) (col)
4813-37200 Stool
48133-37200 Stool
STAN
DARD
FEA
TURE
S
O P T I O N S See pages 85-86 for additional options
backheight
18”
back width19”
seat depth19”
seat width20”
Model 4813Note: please specify stool kit 37200 or 37270
n 300 lb. weight limitn 27” nylon basen 55 mm dual hooded black casters n Meets CAL 117n Foot ring w/heavy duty sleeven Standard seat height approx. range for
model pictured (floor to top of seat): 25” to 32” (with 200mm cylinder)
n #33SS Seat slider 50
n #25F R Foam 75
n #77P Soft Gel pad 58
n #60L Air lumbar 125
n #16B Foot ring base N/Cw/60mm no hood caster. Only available in 175mm or 200mm cylinder
STOO
LSPO
PULA
R OP
TION
S
SEAT
SIZ
E OP
TION
S LIST PRICE480 Small
18 1/2 w x 17 1/2 d N/C484 Large
21 w x 20 d N/C490 X-Large
23 w x 21 d N/C
LIST PRICE1100 X-Small Tractor
19 3/4 w x 19 3/4 d 501200 Small Tractor
22 w x 19 3/4 d 501300 Medium Tractor
22 1/2 w x 20 1/4 d 501900 Tractor
21 w x 19 d N/C
For 31” - 39” counter heights - request 200 mm cylinder
For 34” - 44” counter heights - request 270 mm cylinder
32 www.rfmseating.com
01A Fold away arm with vertical and horizontal adjustment and standard 10 pad 199
08A 3 position pivot, vertically and horizontally adjustable arm with standard 10 pad 128
23A Forward angled vertically and horizontally adjustable arm with 10 pad 125
25A Vertical and horizontal adjustable “T” arm with standard 10 pad 110
37A 4-way, multifunction, vertical and horizontal adjustment w/pad. Pads cannot be changed. 153
INTERNET 4 8 0 0
Arm B C D E F G L (com) (col)Arm Options
Armless 815 838 871 916 977 1074 1264
MANAGERS H IGH BACK STOOLTri-action 03-control
MANAGERS H IGH BACK STOOLRatchet back, tri-action 33-contro
Armless 735 758 791 836 897 994 1184
Arm B C D E F G L (com) (col)
Arm B C D E F G L (com) (col)
4833-37200 Stool
48333-37200 Stool
4898 Task
n #33SS Seat slider 50
n #25F R Foam 75
n #77P Soft Gel pad 58
n #60L Air lumbar 125
n #16B Foot ring base N/Cw/60mm no hood caster. Only available in 175mm or 200mm cylinder
STOO
LSPO
PULA
R OP
TION
S
SEAT
SIZ
E OP
TION
S LIST PRICE480 Small
18 1/2 w x 17 1/2 d N/C484 Large
21 w x 20 d N/C490 X-Large
23 w x 21 d N/C
LIST PRICE1100 X-Small Tractor
19 3/4 w x 19 3/4 d 501200 Small Tractor
22 w x 19 3/4 d 501300 Medium Tractor
22 1/2 w x 20 1/4 d 501900 Tractor
21 w x 19 d N/C
For 31” - 39” counter heights - request 200 mm cylinder For 34” - 44” counter heights - request 270 mm cylinder
STAN
DARD
FEA
TURE
S
O P T I O N S See pages 85-86 for additional options
STAN
DARD
FEA
TURE
S back width19 1/2”
seat width20”
backheight
23”
seat depth19”
Model 4833
n 300 lb. weight limitn 27” nylon basen 55 mm dual hooded black castersn Meets CAL 117n Foot ring w/heavy duty sleeven Standard seat height approx. range for
model pictured (floor to top of seat): 25” to 32” (with 200mm cylinder)
Note: please specify stool kit 37200 or 37270
33www.rfmseating.com
01A Fold away arm with vertical and horizontal adjustment and standard 10 pad 199
03A Loop arm with vertical and horizontal adjustment 199
12A Vertical and horizontal adjustable “T” arm with knob and standard 10 pad 139
25A Vertical and horizontal adjustable “T” arm with standard 10 pad 110
INTERNET B T
Arm B C D E F G L (com) (col)Arm Options
Armless 921 944 977 1022 1083 1180 1370
Ratchet back swivel tilter 07-control
Ratchet back with heavy duty, multi-function infinite tilt lock 50-control w/longer, easy-access cylinder paddle
Armless 896 919 952 997 1058 1155 1345
Arm B C D E F G L (com) (col)
Arm B C D E F G L (com) (col)
BT41 Task
BT42 Task
STAN
DARD
FEA
TURE
S
O P T I O N S See pages 85-86 for additional options
n Accommodates up to 400 lbs.n 70mm heavy-duty castersn Extended back barn 28” black nylon reinforced basen Standard seat height approx. range for
model pictured (floor to top of seat): 18 1/2” to 22” (with 100mm cylinder)
Model BT41
backheight23 1/2”
back width21”
seat depth20”seat width
24”
Not available: 04, 08, 09, 18, 23, 24 & 37 Arms; 33 Seat Slider; 481, 489 Backs
SEAT
SIZ
E OP
TION
S
LIST PRICE2002 Small
24 w x 18 1/2 d N/C2004 Large
24 w x 22 d N/C
n #77P Soft Gel pad 58n #25F R Foam 75n #60L Air lumbar 125n #64L Thoracic ridge 75n #65HR Articulating
headrest 316
BT IN
TERN
ETPO
PULA
R OP
TION
S
34 www.rfmseating.com
STAN
DARD
FEA
TURE
S
O P T I O N S
STAN
DARD
FEA
TURE
S
O P T I O N S No additional options available for this chair
LINK 1 5 0
Arm B C D E F G L (com) (col)Arm Options
Nesting side chair 290 304 323 349 388 446 542
B C D E F G L (com) (col)150 Guest Lobby
STAN
DARD
FEA
TURE
S
O P T I O N S
STAN
DARD
FEA
TURE
S
O P T I O N S No additional options available for this chair
n 300 lb. weight limit n Mesh backn Round heavy gauge 1 1/8”
diameter tubular steel framen Meets CAL 117n Comes with non-marring glides
and castersn Standard seat height approx.
(floor to top of seat): 18”Does not stack
backheight15 1/2”
back width18 1/2”
seat depth17”
seat width16 1/2”
Model 150
n 300 lb. weight limit n Round heavy gauge 1 1/8”
diameter tubular steel framen Meets CAL 117n Comes with non-marring glides
and castersn Standard seat height approx.
(floor to top of seat): 18”Does not stack
backheight15 1/2”
seat depth17”
seat width16 1/2”
Model 152
Arm B C D E F G L (com) (col)Arm Options
Nesting side chair 315 329 348 374 413 471 567
B C D E F G L (com) (col)152 Guest Lobby
back width18 1/2”
35www.rfmseating.com
01A Fold away arm with vertical and horizontal adjustment and standard 10 pad 199
08A 3 position pivot, vertically and horizontally adjustable arm with standard 10 pad 128
23A Forward angled vertically and horizontally adjustable arm with 10 pad 125
25A Vertical and horizontal adjustable “T” arm with standard 10 pad 110
37A 4-way, multifunction, vertical and horizontal adjustment w/pad. Pads cannot be changed. 153
MANHATTAN 6 9 0 0
Arm B C D E F G L (com) (col)
Arm B C D E F G L (com) (col)
Arm Options
Arm Options
Armless 866 889 922 967 1028 1125 1315
Armless 962 985 1018 1063 1124 1221 1411
MANAGERS H IGH BACK Multi-function 05-control w/seat slider
MANAGERS H IGH BACK Multi-function 04 control w/seat slider
MANAGERS H IGH BACK Ratchet back, multi-function 08-control w/seat slider, knee tilt
MANAGERS H IGH BACK Synchro tilt control w/built-in seat slider and ratchet back
Armless 866 889 922 967 1028 1125 1315
Armless 786 809 842 887 948 1045 1235
Arm B C D E F G L (com) (col)
Arm B C D E F G L (com) (col)
Arm B C D E F G L (com) (col)
Arm B C D E F G L (com) (col)
6935 Task
6934 Task
6938 Task
69314 Task
STAN
DARD
FEA
TURE
S
O P T I O N S See pages 85-86 for additional options
n 300 lb. weight limit n 27” nylon basen 55mm dual hooded black castersn Meets CAL 117n Top stitch sewn fabric on seat
and backn Standard seat height approx. (floor to
top of seat): 19 1/2” to 23” (with 100mm cylinder)
Option 58 required on Teknit fabric
Model 6935
backheight23 1/2”
back width19 1/2”
seat depth19”
seat width19 1/2”
SEAT
SIZ
E OP
TION
S LIST PRICE692 Small
18 w x 16 1/2 d N/C698 Large
22 w x 20 d N/C
n #58 Teknit w/beading 33
n #77P Soft Gel pad 58
n #25F R Foam 75
n #60L Air lumbar 125
n #65HR Articulating headrest 316
MAN
HATT
ANPO
PULA
R OP
TION
S
36 www.rfmseating.com
01A Fold away arm with vertical and horizontal adjustment and standard 10 pad 199
08A 3 position pivot, vertically and horizontally adjustable arm with standard 10 pad 128
23A Forward angled vertically and horizontally adjustable arm with 10 pad 125
25A Vertical and horizontal adjustable “T” arm with standard 10 pad 110
37A 4-way, multifunction, vertical and horizontal adjustment w/pad. Pads cannot be changed. 153
MANHATTAN 6 9 0 0
Arm B C D E F G L (com) (col)
Arm B C D E F G L (com) (col)
Arm Options
Arm Options
Armless 1099 1129 1168 1232 1314 1440 1658
Armless 1195 1225 1264 1328 1410 1536 1754
STREAML INE EXECUT IVE H IGH BACK w/pillow, ratchet back, multi-function 05-control w/ seat slider
STREAML INE EXECUT IVE H IGH BACK Multi-function 04 control w/seat slider
STREAML INE EXECUT IVE H IGH BACK Ratchet back, multi-function 08-control w/seat slider, knee til
STREAML INE EXECUT IVE H IGH BACK Synchro tilt control w/built-in seat slider and ratchet back
Armless 1099 1129 1168 1232 1314 1440 1658
Armless 1019 1049 1088 1152 1234 1360 1578
Arm B C D E F G L (com) (col)
Arm B C D E F G L (com) (col)
Arm B C D E F G L (com) (col)
Arm B C D E F G L (com) (col)
6945 Task
6944 Task
6948 Task
69414 Task
STAN
DARD
FEA
TURE
S
O P T I O N S See pages 85-86 for additional options
n 300 lb. weight limit n 27” nylon basen 55mm dual hooded black castersn Meets CAL 117n Top stitch sewn fabric on seat
and backn Standard seat height approx. (floor to
top of seat): 18 3/4” to 21 1/4” (with 76mm cylinder)
Option 58 required on Teknit fabric
Model 6948
SEAT
SIZ
E OP
TION
S LIST PRICE692 Small
18 w x 16 1/2 d N/C698 Large
22 w x 20 d N/C
n #58 Teknit w/beading 33
n #77P Soft Gel pad 58
n #25F R Foam 75
n #60L Air lumbar 125MAN
HATT
ANPO
PULA
R OP
TION
S
37www.rfmseating.com
01A Fold away arm with vertical and horizontal adjustment and standard 10 pad 199
08A 3 position pivot, vertically and horizontally adjustable arm with standard 10 pad 128
23A Forward angled vertically and horizontally adjustable arm with 10 pad 125
25A Vertical and horizontal adjustable “T” arm with standard 10 pad 110
37A 4-way, multifunction, vertical and horizontal adjustment w/pad. Pads cannot be changed. 153
MANHATTAN 6 9 0 0
Arm B C D E F G L (com) (col)
Arm B C D E F G L (com) (col)
Arm Options
Arm Options
Armless 900 923 956 1001 1062 1159 1349
Armless 996 1019 1052 1097 1158 1255 1445
LARGE MANAGERS H IGH BACK Ratchet back, multi-function 05-control w/ seat slider
LARGE MANAGERS H IGH BACK Multi-function 04 control w/seat slider
LARGE MANAGERS H IGH BACK Ratchet back, multi-function 08-control w/seat slider, knee tilt
LARGE MANAGERS H IGH BACK Synchro tilt control w/built-in seat slider and ratchet back
Armless 900 923 956 1001 1062 1159 1349
Armless 820 843 876 921 982 1079 1269
Arm B C D E F G L (com) (col)
Arm B C D E F G L (com) (col)
Arm B C D E F G L (com) (col)
Arm B C D E F G L (com) (col)
6985 Task
6984 Task
6988 Task
69814 Task
STAN
DARD
FEA
TURE
S
O P T I O N S See pages 85-86 for additional options
n 300 lb. weight limit n 27” nylon basen 55mm dual hooded black castersn Meets CAL 117n Top stitch sewn fabric on seat
and backn Standard seat height approx. (floor
to top of seat): 19 1/2” to 23” (with 100mm cylinder)
Option 58 required on Teknit fabric
Model 6985
SEAT
SIZ
E OP
TION
S LIST PRICE692 Small
18 w x 16 1/2 d N/C695 Medium
19 1/2 w x 19 d N/C
n #58 Teknit w/beading 33
n #77P Soft Gel pad 58
n #25F R Foam 75
n #60L Air lumbar 125
n #65HR Articulating headrest 316
MAN
HATT
ANPO
PULA
R OP
TION
S
backheight
24”
back width20”
seat depth20”
seat width22”
38 www.rfmseating.com
01A Fold away arm with vertical and horizontal adjustment and standard 10 pad 199
08A 3 position pivot, vertically and horizontally adjustable arm with standard 10 pad 128
23A Forward angled vertically and horizontally adjustable arm with 10 pad 125
25A Vertical and horizontal adjustable “T” arm with standard 10 pad 110
37A 4-way, multifunction, vertical and horizontal adjustment w/pad. Pads cannot be changed. 153
MANHATTAN 6 9 0 0
Arm B C D E F G L (com) (col)
Arm B C D E F G L (com) (col)
Arm Options
Arm Options
Armless 1129 1159 1198 1262 1344 1470 1688
Armless 1225 1255 1294 1358 1440 1566 1784
EXECUT IVE H IGH BACK w/pillow, ratchet back, multi-function 05-control w/ seat slider
EXECUT IVE H IGH BACK w/pillow, multi-function 04 control w/seat slider
EXECUT IVE H IGH BACK W/P I LLOW w/pillow, ratchet back, multi-function 08-control w/seat slider, knee tilt
EXECUT IVE H IGH BACK w/pillow, synchro tilt control w/built-in seat slider and ratchet back
Armless 1129 1159 1198 1262 1344 1470 1688
Armless 1049 1079 1118 1182 1264 1390 1608
Arm B C D E F G L (com) (col)
Arm B C D E F G L (com) (col)
Arm B C D E F G L (com) (col)
Arm B C D E F G L (com) (col)
6995 Task
6994 Task
6998 Task
69914 Task
backheight34 1/2”
back width20 1/2”
seat depth20”
seat width22”
STAN
DARD
FEA
TURE
S n 300 lb. weight limit n 27” nylon basen 55mm dual hooded black castersn Meets CAL 117n Top stitch sewn fabric on seat
and backn Standard seat height approx. (floor
to top of seat): 19 1/2” to 23” (with 100mm cylinder)
Option 58 required on Teknit fabric
Model 6995
O P T I O N S See pages 85-86 for additional options
SEAT
SIZ
E OP
TION
S LIST PRICE692 Small
18 w x 16 1/2 d N/C695 Medium
19 1/2 w x 19 d N/C
n #58 Teknit w/beading 33
n #77P Soft Gel pad 58
n #25F R Foam 75
n #60L Air lumbar 125MAN
HATT
ANPO
PULA
R OP
TION
S
39www.rfmseating.com
METRO 2 0 0 0
Arm B C D E F G L (com) (col)Arm Options
Armless 1298 1328 1367 1431 1513 1639 1857
MED IUM BACK Ratchet back, balance syncro 06-control; longer, easy-access cylinder paddle
MED IUM BACK Ratchet back with heavy duty, multi-function infinite tilt lock 50 control; longer, easy-access cylinder paddle
Armless 1313 1343 1382 1446 1528 1654 1872
Arm B C D E F G L (com) (col)
Arm B C D E F G L (com) (col)
2006 Task
20050 Task
STAN
DARD
FEA
TURE
S
O P T I O N S See pages 85-86 for additional options
n 500 lb. weight limitn Seat pan structure is 7/8" thick 10 ply hardwoodn 28" black nylon reinforced basen Extended backbarn 70 mm heavy duty castersn Meets CAL 117n Standard seat height approx. range for model
pictured (floor to top of seat): 18 1/2” to 22” (with 100mm cylinder)
Option 58 required on Teknit fabric
backheight
21”
back width22”
seat depth22”
seat width26”
Model 2006Not available: 04, 08, 09, 18, 23, 24 & 37 Arms, 33 Seat Slider
SEAT
SIZ
E OP
TION
S
LIST PRICE2001 Small
26 w x 20 d N/C2002 BT Small
24 w x 18 1/2 d N/C2003 BT Medium
24 w x 20 d N/C2004 BT Large
24 w x 22 N/C
n #25F R Foam 75n #77P Soft Gel pad 58n #60L Air lumbar 125n #58 Teknit
w/beading 33n #65HR Articulating
headrest 316
MET
ROPO
PULA
R OP
TION
S
01A Fold away arm with vertical and horizontal adjustment and standard 10 pad 199
03A Loop arm with vertical and horizontal adjustment 199
12A Vertical and horizontal adjustable “T” arm with knob and standard 10 pad 139
25A Vertical and horizontal adjustable “T” arm with standard 10 pad 110
40 www.rfmseating.com
METRO 2 0 0 0
Arm B C D E F G L (com) (col)Arm Options
Armless 1311 1341 1380 1444 1526 1652 1870
MANAGERS H IGH BACK Ratchet back, balance syncro 06-control; longer, easy-access cylinder paddle
MANAGERS H IGH BACK Ratchet back with heavy duty, multi-function infinite tilt lock 50-control; longer, easy-access cylinder paddle
Armless 1326 1356 1395 1459 1541 1667 1885
Arm B C D E F G L (com) (col)
Arm B C D E F G L (com) (col)
2086 Task
20850 Task
STAN
DARD
FEA
TURE
S
O P T I O N S See pages 85-86 for additional options
Model 2086
n 500 lb. weight limitn Seat pan structure is 7/8" thick 10 ply hardwoodn 28" black nylon reinforced basen Extended backbarn 70 mm heavy duty castersn Meets CAL 117n Standard seat height approx. range for model
pictured (floor to top of seat): 18 1/2” to 22” (with 100mm cylinder)
Option 58 required on Teknit fabric
backheight
23”
back width22”
seat depth22”
seat width26”
Not available: 04, 08, 09, 18, 23, 24 & 37 Arms, 33 Seat Slider
LIST PRICE2001 Small
26 w x 20 d N/C2002 BT Small
24 w x 18 1/2 d N/C2003 BT Medium
24 w x 20 d N/C2004 BT Large
24 w x 22 N/C
n #25F R Foam 75n #77P Soft Gel pad 58n #60L Air lumbar 125n #58 Teknit
w/beading 33n #65HR Articulating
headrest 316
MET
ROPO
PULA
R OP
TION
S
SEAT
SIZ
E OP
TION
S
01A Fold away arm with vertical and horizontal adjustment and standard 10 pad 199
03A Loop arm with vertical and horizontal adjustment 199
12A Vertical and horizontal adjustable “T” arm with knob and standard 10 pad 139
25A Vertical and horizontal adjustable “T” arm with standard 10 pad 110
41www.rfmseating.com
01A Fold away arm with vertical and horizontal adjustment and standard 10 pad 199
08A 3 position pivot, vertically and horizontally adjustable arm with standard 10 pad 128
23A Forward angled vertically and horizontally adjustable arm with 10 pad 125
25A Vertical and horizontal adjustable “T” arm with standard 10 pad 110
37A 4-way, multifunction, vertical and horizontal adjustment w/pad. Pads cannot be changed. 153
MULTI-SHIFT 9 8 0 0
Arm B C D E F G L (com) (col)Arm Options
Armless 1141 1171 1210 1274 1356 1482 1700
MED IUM BACK Ratchet back, balance syncro 06-control
MED IUM BACK Ratchet back with heavy duty, multi-function infinite tilt lock 50 control
Armless 1156 1186 1225 1289 1371 1497 1715
Arm B C D E F G L (com) (col)
Arm B C D E F G L (com) (col)
9806 Task
98050 Task
STAN
DARD
FEA
TURE
S
O P T I O N S See pages 85-86 for additional options
n 350 lb. weight limitn 70 mm heavy duty castersn Fully upholstered outback & seat w/edge guardn Meets CAL 117n 28” black nylon reinforced basen Dual density seat foamn Standard seat height approx. range for model
pictured (floor to top of seat): 18 1/2” to 22” (with 100mm cylinder)
backheight
21”
back width19”
seat depth18”
seat width20”
Model 9806
SEAT
SIZ
E OP
TION
S LIST PRICE982 Medium
21 w x 19 d N/C989 Large
22 w x 19 1/2 d N/C791 X-Small Tractor
19 3/4 w x 19 3/4 d 50792 Small Tractor
22 w x 19 3/4 d 50793 Medium Tractor
22 1/2 w x 20 1/4 d 50
n #33SS Seat slider 50n #77P Soft Gel pad 58n #25F R Foam 75n #60L Air lumbar 125n #65HR Articulating
headrest 316
MUL
TI-S
HIFT
POPU
LAR
OPTI
ONS
PLEASE NOTE: The fabric used on Multi-shift chairs is not covered under warranty. To ensure the greatest protection for these chairs, we strongly recommend selecting one of the fabrics with over 250,000 double rubs for this 24/7 application. These fabrics are Cross Check, Tuff Cloth, and Foundation.
42 www.rfmseating.com
SEAT
SIZ
E OP
TION
S LIST PRICE980 Small
20 w x 18 d N/C989 Large
22 w x 19 1/2 d N/C791 X-Small Tractor
19 3/4 w x 19 3/4 d 50792 Small Tractor
22 w x 19 3/4 d 50793 Medium Tractor
22 1/2 w x 20 1/4 d 50
n #33SS Seat slider 50n #77P Soft Gel pad 58n #25F R Foam 75n #60L Air lumbar 125n #65HR Articulating
headrest 316
MUL
TI-S
HIFT
POPU
LAR
OPTI
ONS
01A Fold away arm with vertical and horizontal adjustment and standard 10 pad 199
08A 3 position pivot, vertically and horizontally adjustable arm with standard 10 pad 128
23A Forward angled vertically and horizontally adjustable arm with 10 pad 125
25A Vertical and horizontal adjustable “T” arm with standard 10 pad 110
37A 4-way, multifunction, vertical and horizontal adjustment w/pad. Pads cannot be changed. 153
MULTI-SHIFT 9 8 0 0
Arm B C D E F G L (com) (col)Arm Options
Armless 1197 1227 1266 1330 1412 1538 1756
MANAGERS H IGH BACKRatchet back, balance syncro 06-control
MANAGERS H IGH BACK Ratchet back with heavy duty, multi-function infinite tilt lock 50 control
Armless 1212 1242 1281 1345 1427 1553 1771
Arm B C D E F G L (com) (col)
Arm B C D E F G L (com) (col)
9826 Task
98250 Task
PLEASE NOTE: The fabric used on Multi-shift chairs is not covered under warranty. To ensure the greatest protection for these chairs, we strongly recommend selecting one of the fabrics with over 250,000 double rubs for this 24/7 application. These fabrics are Cross Check, Tuff Cloth, and Foundation.
STAN
DARD
FEA
TURE
S
O P T I O N S See pages 85-86 for additional options
n 350 lb. weight limitn 70 mm heavy duty castersn Fully upholstered outback & seat w/edge guardn Meets CAL 117n 28” black nylon reinforced basen Dual density seat foamn Standard seat height approx. range for model
pictured (floor to top of seat): 18 1/2” to 22” (with 100mm cylinder)
backheight
22”
back width19”
seat depth19”
seat width21”
Model 9826
43www.rfmseating.com
01A Fold away arm with vertical and horizontal adjustment and standard 10 pad 199
08A 3 position pivot, vertically and horizontally adjustable arm with standard 10 pad 128
23A Forward angled vertically and horizontally adjustable arm with 10 pad 125
25A Vertical and horizontal adjustable “T” arm with standard 10 pad 110
37A 4-way, multifunction, vertical and horizontal adjustment w/pad. Pads cannot be changed. 153
MULTI-SHIFT 9 8 0 0
Arm B C D E F G L (com) (col)Arm Options
Armless 1526 1556 1595 1659 1741 1867 2085
EXECUT IVE H IGH BACK w/pillow Ratchet back, balance syncro 06-control
EXECUT IVE H IGH BACK w/pillow Ratchet back with heavy duty, multi-function infinite tilt lock 50 control
Armless 1541 1571 1610 1674 1756 1882 2100
Arm B C D E F G L (com) (col)
Arm B C D E F G L (com) (col)
9896 Task
98950 Task
PLEASE NOTE: The fabric used on Multi-shift chairs is not covered under warranty. To ensure the greatest protection for these chairs, we strongly recommend selecting one of the fabrics with over 250,000 double rubs for this 24/7 application. These fabrics are Cross Check, Tuff Cloth, and Foundation.
STAN
DARD
FEA
TURE
S
O P T I O N S See pages 85-86 for additional options
Model 9896
n 350 lb. weight limitn 70 mm heavy duty castersn Fully upholstered outback & seat w/edge guardn Meets CAL 117n 28” black nylon reinforced basen Dual density seat foamn Standard seat height approx. range for model
pictured (floor to top of seat): 18 1/2” to 22” (with 100mm cylinder)
backheight
34”
back width19”
seat depth19 1/2”
seat width22”
SEAT
SIZ
E OP
TION
S LIST PRICE980 Small
20 w x 18 d N/C982 Medium
21 w x 19 d N/C791 X-Small Tractor
19 3/4 w x 19 3/4 d 50792 Small Tractor
22 w x 19 3/4 d 50793 Medium Tractor
22 1/2 w x 20 1/4 d 50
n #33SS Seat slider 50
n #77P Soft Gel pad 58
n #25F R Foam 75
n #60L Air lumbar 125MUL
TI-S
HIFT
POPU
LAR
OPTI
ONS
44 www.rfmseating.com
01A Fold away arm with vertical and horizontal adjustment and standard 10 pad 199
08A 3 position pivot, vertically and horizontally adjustable arm with standard 10 pad 128
23A Forward angled vertically and horizontally adjustable arm with 10 pad 125
25A Vertical and horizontal adjustable “T” arm with standard 10 pad 110
37A 4-way, multifunction, vertical and horizontal adjustment w/pad. Pads cannot be changed. 153
PROTASK 5 8 0 0
Arm B C D E F G L (com) (col)
Arm B C D E F G L (com) (col)
Arm Options
Arm Options
Armless 766 789 822 867 928 1025 1215
Armless 670 693 726 771 832 929 1119
Armless 645 668 701 746 807 904 1094
SMALL BACK PET ITE Multi-function 04-control w/seat slider
SMALL BACK PET ITE Ratchet back, multi-function 05-control w/seat slider
SMALL BACK PET ITE Ratchet back, multi-function 08-control w/seat slider, knee tilt
SMALL BACK PET ITE Synchro tilt control w/built-in seat slider and ratchet back
SMALL BACK PET ITE Swivel tilt 07-control and ratchet back w/ seat slider
Armless 590 613 646 691 752 849 1039
Armless 670 693 726 771 832 929 1119
Arm B C D E F G L (com) (col)
Arm B C D E F G L (com) (col)
Arm B C D E F G L (com) (col)
Arm B C D E F G L (com) (col)
Arm B C D E F G L (com) (col)
5804 Task
5805 Task
5808 Task
58014 Task
NS580 Task
STAN
DARD
FEA
TURE
S
O P T I O N S See pages 85-86 for additional options
n 300 lb. weight limitn 25” nylon basen 55 mm dual hooded black castersn Meets CAL 117n Standard seat height approx. range
for model pictured (floor to top of seat): 19” to 22 1/2” (with 100mm cylinder)
Option 58 required on vinyl and leather backs
backheight
15”
back width16”
seat depth17”
seat width18 1/2”
Model 5804
n #58 Vinyl w/beading 33n #77P Soft Gel pad 58n #25F R Foam 75n #60L Air lumbar 125n #88F Flat seat foam 40n #64L Thoracic ridge 75n #65HR Articulating
headrest 316
PROT
ASK
POPU
LAR
OPTI
ONS
SEAT
SIZ
E OP
TION
S LIST PRICE683 Small Standard
19 1/2 w x 18 d N/C 671 Medium Standard
21 w x 17 1/2 d N/C688 Medium
19 1/2 w x 19 d N/C673 Large
22 w x 20 d N/C1900 Tractor
21 w x 19 d N/C
45www.rfmseating.com
01A Fold away arm with vertical and horizontal adjustment and standard 10 pad 199
08A 3 position pivot, vertically and horizontally adjustable arm with standard 10 pad 128
23A Forward angled vertically and horizontally adjustable arm with 10 pad 125
25A Vertical and horizontal adjustable “T” arm with standard 10 pad 110
37A 4-way, multifunction, vertical and horizontal adjustment w/pad. Pads cannot be changed. 153
PROTASK 5 8 0 0
Arm B C D E F G L (com) (col)
Arm B C D E F G L (com) (col)
Arm B C D E F G L (com) (col)
Arm Options
Arm Options
Arm Options
Armless 779 802 835 880 941 1038 1228
Armless 683 706 739 784 845 942 1132
MED IUM BACK PET ITE Multi-function 04-control w/seat slider
MED IUM BACK PET ITE Ratchet back, multi-function 05-control w/seat slider
MED IUM BACK PET ITE Ratchet back, multi-function 08-control w/seat slider, knee tilt
MED IUM BACK PET ITE Synchro tilt control w/built-in seat slider and ratchet back
MED IUM BACK PET ITE Swivel tilt 07-control and ratchet back w/ seat slider
Armless 603 626 659 704 765 862 1052
Armless 683 706 739 784 845 942 1132
Armless 658 681 714 759 820 917 1107
Arm B C D E F G L (com) (col)
Arm B C D E F G L (com) (col)
Arm B C D E F G L (com) (col)
Arm B C D E F G L (com) (col)
Arm B C D E F G L (com) (col)
5824 Task
5825 Task
5828 Task
58214 Task
NS582 Task
n #58 Vinyl w/beading 33n #77P Soft Gel pad 58n #25F R Foam 75n #60L Air lumbar 125n #88F Flat seat foam 40n #64L Thoracic ridge 75n #65HR Articulating
headrest 316
PROT
ASK
POPU
LAR
OPTI
ONS
SEAT
SIZ
E OP
TION
S LIST PRICE685 Small
18 1/2 w x 17 d N/C671 Medium Standard
21 w x 17 1/2 d N/C688 Medium
19 1/2 w x 19 d N/C673 Large
22 w x 20 d N/C1900 Tractor
21 w x 19 d N/C
STAN
DARD
FEA
TURE
S
O P T I O N S See pages 85-86 for additional options
n 300 lb. weight limitn 25” nylon basen 55 mm dual hooded black castersn Meets CAL 117n Standard seat height approx. range
for model pictured (floor to top of seat): 19” to 22 1/2” (with 100mm cylinder)
Option 58 required on vinyl and leather backs
backheight
17”
back width19”
seat depth18”
seat width19 1/2”
Model 5824
46 www.rfmseating.com
01A Fold away arm with vertical and horizontal adjustment and standard 10 pad 199
08A 3 position pivot, vertically and horizontally adjustable arm with standard 10 pad 128
23A Forward angled vertically and horizontally adjustable arm with 10 pad 125
25A Vertical and horizontal adjustable “T” arm with standard 10 pad 110
37A 4-way, multifunction, vertical and horizontal adjustment w/pad. Pads cannot be changed. 153
PROTASK 5 8 0 0
Arm B C D E F G L (com) (col)
Arm B C D E F G L (com) (col)
Arm Options
Arm Options
Armless 793 816 849 894 955 1052 1242
Armless 697 720 753 798 859 956 1146
Armless 672 695 728 773 834 931 1121
MED IUM BACK Multi-function 04-control w/seat slider
MED IUM BACK Ratchet back, multi-function 05-control w/seat slider
MED IUM BACK Ratchet back, multi-function 08-control w/seat slider, knee tilt
MED IUM BACK Synchro tilt control w/built-in seat slider and ratchet back
MED IUM BACK Swivel tilt 07-control and ratchet back w/ seat slider
Armless 617 640 673 718 779 876 1066
Armless 697 720 753 798 859 956 1146
Arm B C D E F G L (com) (col)
Arm B C D E F G L (com) (col)
Arm B C D E F G L (com) (col)
Arm B C D E F G L (com) (col)
Arm B C D E F G L (com) (col)
5844 Task
5845 Task
5848 Task
58414 Task
NS584 Task
STAN
DARD
FEA
TURE
S
O P T I O N S See pages 85-86 for additional options
STAN
DARD
FEA
TURE
S
O P T I O N S See pages 85-86 for additional options
n 300 lb. weight limitn 25” nylon basen 55 mm dual hooded black castersn Meets CAL 117n Standard seat height approx. range
for model pictured (floor to top of seat): 19” to 22 1/2” (with 100mm cylinder)
Option 58 required on vinyl and leather backs
backheight19 1/2”
seat depth17 1/2”
seat width21”
Model 5844
SEAT
SIZ
E OP
TION
S LIST PRICE685 Small
18 1/2 w x 17 d N/C683 Small Standard
19 1/2 w x 18 d N/C688 Medium
19 1/2 w x 19 d N/C673 Large
22 w x 20 d N/C1900 Tractor
21 w x 19 d N/C
n #58 Vinyl w/beading 33n #77P Soft Gel pad 58n #25F R Foam 75n #60L Air lumbar 125n #88F Flat seat foam 40n #64L Thoracic ridge 75n #65HR Articulating
headrest 316
PROT
ASK
POPU
LAR
OPTI
ONS
back width 20”
47www.rfmseating.com
01A Fold away arm with vertical and horizontal adjustment and standard 10 pad 199
08A 3 position pivot, vertically and horizontally adjustable arm with standard 10 pad 128
23A Forward angled vertically and horizontally adjustable arm with 10 pad 125
25A Vertical and horizontal adjustable “T” arm with standard 10 pad 110
37A 4-way, multifunction, vertical and horizontal adjustment w/pad. Pads cannot be changed. 153
PROTASK 5 8 0 0
Arm B C D E F G L (com) (col)
Arm B C D E F G L (com) (col)
Arm B C D E F G L (com) (col)
Arm Options
Arm Options
Arm Options
Armless 851 874 907 952 1013 1110 1300
Armless 755 778 811 856 917 1014 1204
MANAGERS H IGH BACK Multi-function 04-control w/ seat slider
MANAGERS H IGH BACK Ratchet back, multi-function 05-control w/seat slider
MANAGERS H IGH BACK Ratchet back, multi-function 08-control w/seat slider, knee tilt
MANAGERS H IGH BACKSynchro tilt control w/built-in seat slider and ratchet back
MANAGERS H IGH BACK Swivel tilt 07-control and ratchet back w/ seat slider
Armless 675 698 731 776 837 934 1124
Armless 755 778 811 856 917 1014 1204
Armless 730 753 786 831 892 989 1179
Arm B C D E F G L (com) (col)
Arm B C D E F G L (com) (col)
Arm B C D E F G L (com) (col)
Arm B C D E F G L (com) (col)
Arm B C D E F G L (com) (col)
5874 Task
5875 Task
5878 Task
58714 Task
NS587 Task
STAN
DARD
FEA
TURE
S
O P T I O N S See pages 85-86 for additional options
n 300 lb. weight limitn 27” nylon basen 55 mm dual hooded black castersn Meets CAL 117n Standard seat height approx. range
for model pictured (floor to top of seat): 18 3/4” to 22 1/4” (with 100mm cylinder)
Option 58 required on vinyl and leather backs
backheight
24”
back width20 1/2”
seat depth17 1/2”
seat width21”
Model 5874
SEAT
SIZ
E OP
TION
S LIST PRICE685 Small
18 1/2 w x 17 d N/C683 Small Standard
19 1/2 w x 18 d N/C688 Medium
19 1/2 w x 19 d N/C673 Large
22 w x 20 d N/C1900 Tractor
21 w x 19 d N/C
n #58 Vinyl w/beading 33n #77P Soft Gel pad 58n #25F R Foam 75n #60L Air lumbar 125n #88F Flat seat foam 40n #64L Thoracic ridge 75n #65HR Articulating
headrest 316
PROT
ASK
POPU
LAR
OPTI
ONS
48 www.rfmseating.com
PROTASK 5 8 0 0
Arm B C D E F G L (com) (col)
Arm B C D E F G L (com) (col)
Arm Options
Arm Options
Armless 778 801 834 879 940 1037 1227
Armless 792 815 848 893 954 1051 1241
MED IUM BACK PET ITE STOOLTri-action 03-control
MED IUM BACK STOOLTri-action 03-control
MED IUM BACK PET ITE STOOLRatchet back, tri-action 33-control
MED IUM BACK STOOLRatchet back, tri-action 33-control
Armless 698 721 754 799 860 957 1147
Armless 712 735 768 813 874 971 1161
Arm B C D E F G L (com) (col)
Arm B C D E F G L (com) (col)
Arm B C D E F G L (com) (col)
Arm B C D E F G L (com) (col)
5823-37200 Stool
5843-37200 Stool
58233-37200 Stool
58433-37200 Stool
STAN
DARD
FEA
TURE
S
O P T I O N S See pages 85-86 for additional options (including arms)
STAN
DARD
FEA
TURE
S
Model 5823
backheight
17”
back width19”
seat depth18”
seat width19 1/2”
n 300 lb. weight limitn 27” nylon basen 55 mm dual hooded black castersn Meets CAL 117n Foot ring with heavy-duty sleeven Standard seat height approx. range for
model pictured (floor to top of seat): 25” to 32” (with 200mm cylinder)
Option 58 required on vinyl and leather back
Note: please specify stool kit 37200 or 37270
STAN
DARD
FEA
TURE
S
O P T I O N S See pages 85-86 for additional options (including arms)
Note: please specify stool kit 37200 or 37270 Model 58433
backheight19 1/2”
back width20”
seat depth17 1/2”
seat width21”
n 300 lb. weight limitn 27” nylon basen 55 mm dual hooded black castersn Meets CAL 117n Foot ring with heavy-duty sleeven Standard seat height approx. range for
model pictured (floor to top of seat): 25” to 32” (with 200mm cylinder)
Option 58 required on vinyl and leather back
685 Small LIST PRICE 18 1/2 w x 17 d N/C
683 Small Standard 19 1/2 w x 18 d N/C
688 Medium 19 1/2 w x 19 d N/C
673 Large 22 w x 20 d N/C
1900 Tractor 21 w x 19 d N/C
SEAT
SIZ
E OP
TION
S
n #33SS Seat slider 50 n #25F R Foam 75n #77P Soft Gel pad 58n #60L Air lumbar 125n #58 Vinyl beading 33n #16B Foot ring base N/C
w/60mm no hood caster. Only available in 175mm or 200mm cylinder
STOO
LSPO
PULA
R OP
TION
S
49www.rfmseating.com
SEAT
SIZ
E OP
TION
S
LIST PRICE2002 Small
24 w x 18 1/2 d N/C2004 Large
24 w x 22 d N/C
n #58 Vinyl w/beading 33n #77P Soft Gel pad 58n #25F R Foam 75n #60L Air lumbar 125n #64L Thoracic ridge 75n #65HR Articulating
headrest 316
BT P
ROTA
SKPO
PULA
R OP
TION
S
STAN
DARD
FEA
TURE
S
O P T I O N S See pages 85-86 for additional options
n Accommodates up to 400 lbs.n 70mm heavy-duty castersn Extended back barn 28” black nylon reinforced basen Standard seat height approx. range for
model pictured (floor to top of seat): 18 1/2” to 22” (with 100mm cylinder)
Option 58 required on vinyl and leather backs
Model BT55
backheight
24”
back width20 1/2”
seat depth20”
seat width24”
Not available: 04, 08, 09, 18, 23, 24 & 37 Arms; 33 Seat Slider; 582 Backs
PROTASK B T
Arm B C D E F G L (com) (col)
Arm B C D E F G L (com) (col)
Arm Options
Arm Options
Armless 898 921 954 999 1060 1157 1347
Armless 956 979 1012 1057 1118 1215 1405
Ratchet back swivel tilter 07-control
Ratchet back swivel tilter 07-control
Ratchet back with heavy duty, multi-function infinite tilt lock 50-control w/longer, easy-access cylinder paddle
Ratchet back with heavy duty, multi-function infinite tilt lock 50-control w/longer, easy-access cylinder paddle
Armless 873 896 929 974 1035 1132 1322
Armless 931 954 987 1032 1093 1190 1380
Arm B C D E F G L (com) (col)
Arm B C D E F G L (com) (col)
Arm B C D E F G L (com) (col)
Arm B C D E F G L (com) (col)
BT51 Task
BT55 Task
BT52 Task
BT56 Task
Model BT52
STAN
DARD
FEA
TURE
S
O P T I O N S See pages 85-86 for additional options (including arms)
n Accommodates up to 400 lbs.n 70mm heavy-duty castersn Extended back barn 28” black nylon reinforced basen Standard seat height approx. range for
model pictured (floor to top of seat): 18 1/2” to 22” (with 100mm cylinder)
Option 58 required on vinyl and leather backs
backheight19 1/2”
back width20”
seat depth20”seat width
24”
Not available: 04, 08, 09, 18, 23, 24 & 37 Arms; 33 Seat Slider; 582 Backs
50 www.rfmseating.com
Arm B C D E F G L (com) (col)
Arm B C D E F G L (com) (col)
Arm Options
Arm Options
Standard 606 661 694 738 794 877 1098
Armless 523 578 611 655 711 794 1015
Standard 702 757 790 834 890 973 1194
Armless 619 674 707 751 807 890 1111
MED IUM BACK Multi-function 05 control, ratchet back, seat slider
Standard arm is 25A
MED IUM BACK Ratchet back, multi-function 08-control w/seat slider, knee tilt
Standard arm is 25A
MED IUM BACK Synchro tilt control w/built-in seat slider and ratchet back
Standard arm is 25A
MED IUM BACK Swivel tilt 07-control and ratchet back w/seat slider
Standard arm is 25A
Standard 606 661 694 738 794 877 1098
Armless 523 578 611 655 711 794 1015
Standard 581 636 669 713 769 852 1073
Armless 498 553 586 630 686 769 990
Arm B C D E F G L (com) (col)
Arm B C D E F G L (com) (col)
Arm B C D E F G L (com) (col)
Arm B C D E F G L (com) (col)
R2 Task
R2-8 Task
R2-14 Task
NSR2 Task
01A Fold away arm with vertical and horizontal adjustment and standard 10 pad 199
08A 3 position pivot, vertically and horizontally adjustable arm with standard 10 pad 128
23A Forward angled vertically and horizontally adjustable arm with 10 pad 125
37A 4-way, multifunction, vertical and horizontal adjustment w/pad. Pads cannot be changed. 153
RAINIER 3 6 0 0
Other arms and caster options are now available on Rainier series chairs. See pages 85-86 for details.
STAN
DARD
FEA
TURE
S n 300 lb. weight limitn Ratchet backn Thoracic lumbar supportn 55 mm dual hooded black castersn Multi-function controln Meets CAL 117n 25” nylon basen Standard seat height approx. range for
model pictured (floor to top of seat): 19 1/4” to 22 3/4” (with 100mm cylinder)
seat width19 1/2”
seat depth17 1/2”
back width17 1/2”
back height19 1/2”
Model R2
SEAT
SIZ
E OP
TION
S LIST PRICE363 Medium
21 1/2 w x 18 d N/C673 Large
22 w x 20 d N/C
No ESD, Multi-shift options, no 65 headrest or Bariatric models
Available without seat slider for a -27 list decrease
51www.rfmseating.com
SEAT
SIZ
E OP
TION
S LIST PRICE362 Small
19 1/2 w x 17 1/2 d N/C673 Large
22 w x 20 d N/C
Arm B C D E F G L (com) (col)
Arm B C D E F G L (com) (col)
Arm Options
Arm Options
Standard 654 709 742 786 842 925 1146
Armless 571 626 659 703 759 842 1063
Standard 750 805 838 882 938 1021 1242
Armless 667 722 755 799 855 938 1159
MANAGERS H IGH BACK Multi-function, ratchet back, seat slider
Standard arm is 25A
MANAGERS H IGH BACK Ratchet back, multi-function 08-control w/seat slider, knee tilt
Standard arm is 25A
MANAGERS H IGH BACK Synchro tilt control w/built-in seat slider and ratchet back
Standard arm is 25A
MANAGERS H IGH BACK Swivel tilt 07-control and ratchet back w/seat slider
Standard arm is 25A
Standard 654 709 742 786 842 925 1146
Armless 571 626 659 703 759 842 1063
Standard 629 684 717 761 817 900 1121
Armless 546 601 634 678 734 817 1038
Arm B C D E F G L (com) (col)
Arm B C D E F G L (com) (col)
Arm B C D E F G L (com) (col)
Arm B C D E F G L (com) (col)
R4 Task
R4-8 Task
R4-14 Task
NSR4 Task
01A Fold away arm with vertical and horizontal adjustment and standard 10 pad 199
08A 3 position pivot, vertically and horizontally adjustable arm with standard 10 pad 128
23A Forward angled vertically and horizontally adjustable arm with 10 pad 125
37A 4-way, multifunction, vertical and horizontal adjustment w/pad. Pads cannot be changed. 153
RAINIER 3 6 0 0
STAN
DARD
FEA
TURE
S n 300 lb. weight limitn Ratchet backn Thoracic lumbar supportn 55 mm dual hooded black castersn Meets CAL 117n 27” resin basen Protective durable plastic outbackn Standard seat height approx. range for
model pictured (floor to top of seat): 19 1/2” to 23” (with 100mm cylinder)
seat width21 1/2”
seat depth18”
back height
25”
Model R4
Other arms and caster options are now available on Rainier series chairs. See pages 85-86 for details.
back width19 1/2”
No ESD, Multi-shift options or Bariatric models
Available without seat slider for a -27 list decrease
52 www.rfmseating.com
SEAT
SIZ
E OP
TION
S LIST PRICE1100 X-Small Tractor
19 3/4 w x 19 3/4 d 501200 Small Tractor
22 w x 19 3/4 d 501300 Medium Tractor
22 1/2 w x 20 1/4 d 501500 Deep Tractor
24 1/4 w x 19 3/4 d 150
Arm B C D E F G L (com) (col)
Arm B C D E F G L (com) (col)
Arm Options
Arm Options
Standard 606 661 694 738 794 877 1098
Armless 523 578 611 655 711 794 1015
Standard 702 757 790 834 890 973 1194
Armless 619 674 707 751 807 890 1111
MED IUM BACK Multi-function, ratchet back, seat slider
Standard arm is 25A
MED IUM BACK Ratchet back, multi-function 08-control w/seat slider, knee tilt
Standard arm is 25A
MED IUM BACK Synchro tilt control w/built-in seat slider and ratchet back
Standard arm is 25A
MED IUM BACK Swivel tilt 07-control and ratchet back w/seat slider
Standard arm is 25A
Standard 606 661 694 738 794 877 1098
Armless 523 578 611 655 711 794 1015
Standard 581 636 669 713 769 852 1073
Armless 498 553 586 630 686 769 990
Arm B C D E F G L (com) (col)
Arm B C D E F G L (com) (col)
Arm B C D E F G L (com) (col)
Arm B C D E F G L (com) (col)
R6 Task
R6-8 Task
R6-14 Task
NSR6 Task
01A Fold away arm with vertical and horizontal adjustment and standard 10 pad 199
08A 3 position pivot, vertically and horizontally adjustable arm with standard 10 pad 128
23A Forward angled vertically and horizontally adjustable arm with 10 pad 125
37A 4-way, multifunction, vertical and horizontal adjustment w/pad. Pads cannot be changed. 153
RAINIER 3 6 0 0
Other arms and caster options are now available on Rainier series chairs. See pages 85-86 for details.
STAN
DARD
FEA
TURE
S n 300 lb. weight limitn 1900 comfort foam molded tractor seatn Ratchet backn Thoracic lumbar supportn 55 mm dual hooded black castersn Meets CAL 117n 25” nylon basen Protective durable plastic outbackn Standard seat height approx. range for
model pictured (floor to top of seat): 18 3/4” to 22 1/4” (with 100mm cylinder)
seat width21”
seat depth19”
back height19 1/2”
Model R6
back width17 1/2”
Available without seat slider for a -27 list decrease
No ESD, Multi-shift options, no 65 headrest or Bariatric models
53www.rfmseating.com
SEAT
SIZ
E OP
TION
S LIST PRICE1100 X-Small Tractor
19 3/4 w x 19 3/4 d 501200 Small Tractor
22 w x 19 3/4 d 501300 Medium Tractor
22 1/2 w x 20 1/4 d 501500 Deep Tractor
24 1/4 w x 19 3/4 d 150
Arm B C D E F G L (com) (col)
Arm B C D E F G L (com) (col)
Arm Options
Arm Options
Standard 654 709 742 786 842 925 1146
Armless 571 626 659 703 759 842 1063
Standard 750 805 838 882 938 1021 1242
Armless 667 722 755 799 855 938 1159
MANAGERS H IGH BACK Multi-function, ratchet back, seat slider, vertical and horizontal “T” arm
Standard arm is 25A
MANAGERS H IGH BACK Ratchet back, multi-function 08-control w/seat slider, knee tilt
Standard arm is 25A
MANAGERS H IGH BACK Synchro tilt control w/built-in seat slider and ratchet back
Standard arm is 25A
MANAGERS H IGH BACK Swivel tilt 07-control and ratchet back w/seat slider
Standard arm is 25A
Standard 654 709 742 786 842 925 1146
Armless 571 626 659 703 759 842 1063
Standard 629 684 717 761 817 900 1121
Armless 546 601 634 678 734 817 1038
Arm B C D E F G L (com) (col)
Arm B C D E F G L (com) (col)
Arm B C D E F G L (com) (col)
Arm B C D E F G L (com) (col)
R8 Task
R8-8 Task
R8-14 Task
NSR8 Task
01A Fold away arm with vertical and horizontal adjustment and standard 10 pad 199
08A 3 position pivot, vertically and horizontally adjustable arm with standard 10 pad 128
23A Forward angled vertically and horizontally adjustable arm with 10 pad 125
37A 4-way, multifunction, vertical and horizontal adjustment w/pad. Pads cannot be changed. 153
RAINIER 3 6 0 0ST
ANDA
RD F
EATU
RES n 300 lb. weight limit
n 1900 comfort foam molded tractor seatn Ratchet backn Thoracic lumbar supportn 55 mm dual hooded black castersn Meets CAL 117n 27” nylon basen Protective durable plastic outbackn Standard seat height approx. range for
model pictured (floor to top of seat): 18 1/2” to 22” (with 100mm cylinder)
seat width21”
seat depth19”
back height
25”
Model R8
Other arms and caster options are now available on Rainier series chairs. See pages 85-86 for details.
back width19 1/2”
Available without seat slider for a -27 list decrease
No ESD, Multi-shift options or Bariatric models
54 www.rfmseating.com
Arm B C D E F G L (com) (col)
Arm B C D E F G L (com) (col)
Arm Options
Arm Options
Vertical & horizontal adjustable “T” arm w/button and ratchet back
Standard arm is 25A
Vertical & horizontal adjustable “T” arm w/button and ratchet back
Standard arm is 25A
Standard 674 697 730 775 836 933 1123
Armless 591 614 647 692 753 850 1040
Standard 722 745 778 823 884 981 1171
Armless 639 662 695 740 801 898 1088
Arm B C D E F G L (com) (col)
Arm B C D E F G L (com) (col)
R1-33-37200 Stool
R3-33-37200 Stool
RAINIER 3 6 0 0ST
ANDA
RD F
EATU
RES
O P T I O N S See pages 85-86 for additional optionsSee pages 85-86 for additional options (including arms)O P T I O N S
STAN
DARD
FEA
TURE
S
Note: please specify stool kit 37200 or 37270
n 300 lb. weight limitn Ratchet backn Thoracic lumbar supportn 55 mm dual hooded black castersn Meets CAL 117n 27” nylon basen Foot ring with heavy-duty sleeven Protective durable plastic outbackn Standard seat height approx. range for
model pictured (floor to top of seat): 25 1/4” to 32 1/4” (with 200mm cylinder)
seat width19 1/2”
seat depth17 1/2”
back width17 1/2”
back height19 1/2”
Model R1-33
See pages 85-86 for additional options (including arms)O P T I O N S
STAN
DARD
FEA
TURE
S
Note: please specify stool kit 37200 or 37270
n 300 lb. weight limitn Ratchet backn Thoracic lumbar supportn 55 mm dual hooded black castersn Meets CAL 117n 27” nylon basen Foot ring with heavy-duty sleeven Protective durable plastic outbackn Standard seat height approx. range for
model pictured (floor to top of seat): 25 1/4” to 32 1/4” (with 200mm cylinder)
seat width21 1/2”
seat depth18”
back width19 1/2”
back height
25”
Model R3-33
For 31” - 39” counter heights - request 200 mm cylinderFor 34” - 44” counter heights - request 270 mm cylinder
n #14BB Extended back bar 46
n #33SS Seat slider 50
n #16B Foot ring base N/Cw/60mm no hood caster. Only available in 175mm or 200mm cylinder
STOO
LSPO
PULA
R OP
TION
S
SEAT
SIZ
E OP
TION
S LIST PRICE362 Small
19 1/2 w x 17 1/2 d N/C363 Medium
21 1/2 w x 18 d N/C673 Large
22 w x 20 d N/C
No ESD, Multi-shift options, no 65 headrest or Bariatric models
No ESD, Multi-shift options, no 65 headrest or Bariatric models
55www.rfmseating.com
Arm B C D E F G L (com) (col)
Arm B C D E F G L (com) (col)
Arm Options
Arm Options
Armless 730 750 773 826 880 962 1101
Armless 826 846 869 922 976 1058 1197
MED IUM BACK Ratchet back, multi-function 05-control w/seat slider
MED IUM BACK Ratchet back, multi-function 08-control w/seat slider, knee tilt
MED IUM BACK Synchro tilt control w/built-in seat slider and ratchet back
MED IUM BACK Swivel tilt 07-control and ratchet back w/seat slider
Armless 730 750 773 826 880 962 1101
Armless 705 725 748 801 855 937 1076
Arm B C D E F G L (com) (col)
Arm B C D E F G L (com) (col)
Arm B C D E F G L (com) (col)
Arm B C D E F G L (com) (col)
4225 Task
4228 Task
42214 Task
NS422 Task
01A Fold away arm with vertical and horizontal adjustment and standard 10 pad 199
08A 3 position pivot, vertically and horizontally adjustable arm with standard 10 pad 128
23A Forward angled vertically and horizontally adjustable arm with 10 pad 125
25A Vertical and horizontal adjustable “T” arm with standard 10 pad 110
37A 4-way, multifunction, vertical and horizontal adjustment w/pad. Pads cannot be changed. 153
RAY 4 2 0 0ST
ANDA
RD F
EATU
RES
O P T I O N S See pages 85-86 for additional options
Model 4225
n 300 lb. weight limitn 25” nylon basen 55 mm dual hooded black castersn Protective durable plastic outbackn Meets CAL 117n Standard seat height approx. range
for model pictured (floor to top of seat): 19” to 22 1/2” (with 100mm cylinder)
n Not available: 03 & 04 controls
back width17 1/2”
seat width20 1/2”
backheight19 1/2”
seat depth17 1/2”
n #77P Soft Gel pad 58
n #25F R Foam 75
n #60L Air lumbar 125
n #64L Thoracic ridge 75
RAY
POPU
LAR
OPTI
ONS
SEAT
SIZ
E OP
TION
S LIST PRICE420 X-Small
18 1/2 w x 17 d N/C 423 Medium
21 w x 18 1/2 d N/C429 Large
22 w x 20 d N/C1100 X-Small Tractor
19 3/4 w x 19 3/4 d 50
LIST PRICE1200 Small Tractor
22 w x 19 3/4 d 501300 Medium Tractor
22 1/2 w x 20 1/4 d 501500 Deep Tractor
24 1/4 w x 19 3/4 d 1501900 Tractor
21 w x 19 d N/C
No ESD, Multi-shift options, no 65 headrest or Bariatric models
56 www.rfmseating.com
n #77P Soft Gel pad 58
n #25F R Foam 75
n #60L Air lumbar 125
n #64L Thoracic ridge 75
RAY
POPU
LAR
OPTI
ONS
SEAT
SIZ
E OP
TION
S LIST PRICE420 X-Small
18 1/2 w x 17 d N/C 422 Small
20 1/2 w x 17 1/2 d N/C429 Large
22 w x 20 d N/C1100 X-Small Tractor
19 3/4 w x 19 3/4 d 50
LIST PRICE1200 Small Tractor
22 w x 19 3/4 d 501300 Medium Tractor
22 1/2 w x 20 1/4 d 501500 Deep Tractor
24 1/4 w x 19 3/4 d 1501900 Tractor
21 w x 19 d N/C
Arm B C D E F G L (com) (col)
Arm B C D E F G L (com) (col)
Arm Options
Arm Options
Armless 766 786 809 862 916 998 1137
Armless 862 882 905 958 1012 1094 1233
MANAGERS H IGH BACK Ratchet back, Multi-function 05-control w/seat slider
MANAGERS H IGH BACK Ratchet back, multi-function 08-control w/seat slider, knee tilt
MANAGERS H IGH BACK Synchro tilt control w/built-in seat slider and ratchet back
MANAGERS H IGH BACK Swivel tilt 07-control and ratchet back w/seat slider
Armless 766 786 809 862 916 998 1137
Armless 741 761 784 837 891 973 1112
Arm B C D E F G L (com) (col)
Arm B C D E F G L (com) (col)
Arm B C D E F G L (com) (col)
Arm B C D E F G L (com) (col)
4235 Task
4238 Task
42314 Task
NS423 Task
01A Fold away arm with vertical and horizontal adjustment and standard 10 pad 199
08A 3 position pivot, vertically and horizontally adjustable arm with standard 10 pad 128
23A Forward angled vertically and horizontally adjustable arm with 10 pad 125
25A Vertical and horizontal adjustable “T” arm with standard 10 pad 110
37A 4-way, multifunction, vertical and horizontal adjustment w/pad. Pads cannot be changed. 153
RAY 4 2 0 0ST
ANDA
RD F
EATU
RES
O P T I O N S See pages 85-86 for additional options
n 300 lb. weight limitn 27” nylon basen 55 mm dual hooded black castersn Protective durable plastic outbackn Meets CAL 117n Standard seat height approx. range
for model pictured (floor to top of seat): 19 1/4” to 22 3/4” (with 100mm cylinder)
n Not available: 03 & 04 controls
back width19 1/2”
seat width21”
backheight24 1/2”
seat depth18 1/2”
Model 4235No ESD, Multi-shift options, no 65 headrest or Bariatric models
57www.rfmseating.com
Arm B C D E F G L (com) (col)Arm Options
Armless 1082 1102 1125 1178 1232 1314 1453
Armless 1178 1198 1221 1274 1328 1410 1549
EXECUT IVE H IGH BACK w/headrest Ratchet back, multi-function 05-control w/seat slider
EXECUT IVE H IGH BACK w/headrest Ratchet back, multi-function 08-control w/seat slider, knee tilt
EXECUT IVE H IGH BACK w/headrest Synchro tilt control w/built-in seat slider and ratchet back
Armless 1082 1102 1125 1178 1232 1314 1453
Arm B C D E F G L (com) (col)
Arm B C D E F G L (com) (col)
Arm B C D E F G L (com) (col)
4295 Task
4298 Task
42914 Task
01A Fold away arm with vertical and horizontal adjustment and standard 10 pad 199
08A 3 position pivot, vertically and horizontally adjustable arm with standard 10 pad 128
23A Forward angled vertically and horizontally adjustable arm with 10 pad 125
25A Vertical and horizontal adjustable “T” arm with standard 10 pad 110
37A 4-way, multifunction, vertical and horizontal adjustment w/pad. Pads cannot be changed. 153
RAY 4 2 0 0ST
ANDA
RD F
EATU
RES
O P T I O N S See pages 85-86 for additional options
Model 42911 w/1500 tractor seat
n Articulating headrestn 300 lb. weight limitn 27” nylon basen 55 mm dual hooded black castersn Durable, protective plastic outbackn Meets CAL 117n Standard seat height approx. range for
model pictured (floor to top of seat): 18 3/4” to 22 1/4” (with 100mm cylinder)
n Not available: 03 & 04 controls
backheight24 1/2”
seat depth18 1/2”
adjustable12”
seat width21”
back width19 1/2”
n #77P Soft Gel pad 58
n #25F R Foam 75
n #60L Air lumbar 125
n #64L Thoracic ridge 75
RAY
POPU
LAR
OPTI
ONS
SEAT
SIZ
E OP
TION
S LIST PRICE420 X-Small
18 1/2 w x 17 d N/C 422 Small
20 1/2 w x 17 1/2 d N/C429 Large
22 w x 20 d N/C1100 X-Small Tractor
19 3/4 w x 19 3/4 d 50
LIST PRICE1200 Small Tractor
22 w x 19 3/4 d 501300 Medium Tractor
22 1/2 w x 20 1/4 d 501500 Deep Tractor
24 1/4 w x 19 3/4 d 1501900 Tractor
21 w x 19 d N/C
No ESD, Multi-shift options or Bariatric models
58 www.rfmseating.com
Arm B C D E F G L (com) (col)
Arm B C D E F G L (com) (col)
Arm Options
Arm Options
MED IUM BACK STOOLRatchet back, tri-action 33-control
MANAGERS H IGH BACK STOOLRatchet back, tri-action 33-control
Armless 825 845 868 921 975 1057 1196
Armless 861 881 904 957 1011 1093 1232
Arm B C D E F G L (com) (col)
Arm B C D E F G L (com) (col)
42233-37200 Stool
42333-37200 Stool
RAY 4 2 0 0ST
ANDA
RD F
EATU
RES
O P T I O N S See pages 85-86 for additional optionsSee pages 85-86 for additional options (including arms)O P T I O N S
backheight19 1/2”
back width17 1/2”
seat depth17 1/2”
seat width20 1/2”
Model 42233
Note: please specify stool kit 37200 or 37270
n 300 lb. weight limitn 27” nylon basen 55 mm dual hooded black castersn Protective durable plastic outbackn Meets CAL 117n Foot ring w/heavy duty sleeven Standard seat height approx. range for
model pictured (floor to top of seat): 25” to 32” (with 200mm cylinder)
See pages 85-86 for additional options (including arms)O P T I O N S
STAN
DARD
FEA
TURE
S
backheight24 1/2”
seat depth18 1/2”
seat width21”
Model 42333
Note: please specify stool kit 37200 or 37270
n 300 lb. weight limitn 27” nylon basen 55 mm dual hooded black castersn Protective durable plastic outbackn Meets CAL 117n Foot ring w/heavy duty sleeven Standard seat height approx. range for
model pictured (floor to top of seat): 25” to 32” (with 200mm cylinder)
For 31” - 39” counter heights - request 200 mm cylinder For 34” - 44” counter heights - request 270 mm cylinder
n #33SS Seat slider 50
n #25F R Foam 75
n #77P Soft Gel pad 58
n #60L Air lumbar 125
n #16B Foot ring base N/Cw/60mm no hood caster. Only available in 175mm or 200mm cylinder
STOO
LSPO
PULA
R OP
TION
S
SEAT
SIZ
E OP
TION
S
LIST PRICE420 X-Small
18 1/2 w x 17 d N/C 423 Medium
21 w x 18 1/2 d N/C429 Large
22 w x 20 d N/C1100 X-Small Tractor
19 3/4 w x 19 3/4 d 50
LIST PRICE1200 Small Tractor
22 w x 19 3/4 d 501300 Medium Tractor
22 1/2 w x 20 1/4 d 501900 Tractor
21 w x 19 d N/C
back width19 1/2”
No ESD, Multi-shift options, no 65 headrest or Bariatric models
No ESD, Multi-shift options, no 65 headrest or Bariatric models
59www.rfmseating.com
641 664 697 742 803 900 1090
Chairs require back assembly
Arm B C D E F G L (com) (col)
Arm B C D E F G L (com) (col)
Arm Options
Arm Options
727 750 783 828 889 986 1176
Deluxe stick leg style steel frame guest chair in black powder coat, armless• 300 lb. weight limit
Deluxe stick leg style steel frameguest chair in black powder coat, with upholstered polyurethane padded arms• 300 lb. weight limit
Deluxe sled base style steel frame guest chair in black powder coat, armless• 300 lb. weight limit• Non-marring glides
Deluxe sled base style steel frame guest chair in black powder coat, with upholstered polyurethane padded arms• 300 lb. weight limit• Non-marring glides
611 634 667 712 773 870 1060
757 780 813 858 919 1016 1206
B C D E F G L (com) (col)
B C D E F G L (com) (col)
B C D E F G L (com) (col)
B C D E F G L (com) (col)
701 Guest Lobby
701A Guest Lobby
703 Guest Lobby
703A Guest Lobby
SIDEKICK 7 0 0ST
ANDA
RD F
EATU
RES
O P T I O N S See pages 85-86 for additional options
n High density foam on a generous sized seat and back
n 14 gauge round heavy gauge 1 1/8” diameter tubular steel frame
n Meets CAL 117n Does not stackn Models 701 and 701A are wall saversn Standard floor-to-top seat height
approx. 19”
backheight
17”
back width20 1/2”
seat depth19 1/4”
seat width21”
Model 701A
SIDE
KICK
POPU
LAR
OPTI
ONS Bridge Table 141
23 w x 15 1/2 d Corner Table 363Ganging Plate 87
D I M E N S I O N S Outside of the arm pads: 24”Top of the back to the floor: 32 1/2”
48”
18 3/4”15 1/4”15 1/4”
21 3/4”
60 www.rfmseating.com
Arm B C D E F G L (com) (col)
Arm B C D E F G L (com) (col)
Arm Options
Arm Options
819 842 875 920 981 1078 1268
900 923 956 1001 1062 1159 1349
Deluxe stick leg style big and tall steel frame guest chair in black powder coat, armless• 500 lb. weight limit
Deluxe stick leg style big and tall steel frame guest chair in black powder coat, with upholstered polyurethane padded arms• 500 lb. weight limit
Deluxe sled base style big and tall steel frame guest chair in black powder coat, armless• 500 lb. weight limit• Non-marring glides
Deluxe sled base style big and tall steel frame guest chair in black powder coat, with upholstered polyurethane padded arms• 500 lb. weight limit
784 807 840 885 946 1043 1233
935 958 991 1036 1097 1194 1384
B C D E F G L (com) (col)
B C D E F G L (com) (col)
B C D E F G L (com) (col)
B C D E F G L (com) (col)
702 Guest Lobby
702A Guest Lobby
704 Guest Lobby
704A Guest Lobby
SIDEKICK 7 0 0
SIDE
KICK
POPU
LAR
OPTI
ONS Bridge Table 141
23 w x 15 1/2 d Corner Table 363Ganging Plate 87Chairs shown with a connecting black laminate corner table.
D I M E N S I O N S Outside of the arm pads: 31”Top of the back to the floor: 32 1/2”
48”
18 3/4”15 1/4”15 1/4”
21 3/4”
STAN
DARD
FEA
TURE
S
O P T I O N S See pages 85-86 for additional options
n High density foam on a generous sized seat and back
n 14 gauge round heavy gauge 1 1/8” diameter tubular steel frame
n Meets CAL 117n Does not stackn Models 702 and 702A are wall saversn Standard floor-to-top seat height
approx. 19”
backheight
17”
back width27 1/2”
seat depth20 1/2”seat width
28”
Model 704A
Chairs ship fully disassembled
61www.rfmseating.com
Arm B C D E F G L (com) (col)Arm Options
Armless 1393 1416 1449 1494 1555 1652 1842
MED IUM BACK Ratchet back, balance Syncro 06-control; long, easy-access cylinder paddle
MED IUM BACK Ratchet back with heavy duty, multi-function infinite tilt lock 50 control; long, easy-access cylinder paddle
Armless 1408 1431 1464 1509 1570 1667 1857
Arm B C D E F G L (com) (col)
Arm B C D E F G L (com) (col)
8526 Task
85250 Task
SIERRA 8 5 0 0ST
ANDA
RD F
EATU
RES
O P T I O N S See pages 85-86 for additional options
n 500 lb. weight limitn Dual density seat foamn Seat pan structure is 7/8”
thick 10 ply hardwoodn 28” black nylon
reinforced basen 70 mm heavy duty
castersn Fully upholstered
out back in black air knit
n Extended back barn Meets CAL 117n Standard seat height
approx. range for model pictured (floor to top of seat): 18 3/4” to 22 1/4” (with 100mm cylinder)
back width24 1/2”
seat width26”
backheight23 1/2”
seat depth18 1/2”
Model 8526Not available: 04, 08, 09, 18, 23, 24 & 37A arms, seat slider, foot ring, 25R Foam
n #77P Soft Gel pad 58n #60L Air lumbar 125n #65HR Articulating
headrest 316
SIER
RAPO
PULA
R OP
TION
S
SEAT
SIZ
E OP
TION
S
LIST PRICE853 Medium
26 w x 20 1/2 d N/C856 Large
26 w x 22 1/2 d N/C
01A Fold away arm with vertical and horizontal adjustment and standard 10 pad 199
03A Loop arm with vertical and horizontal adjustment 199
12A Vertical and horizontal adjustable “T” arm with knob and standard 10 pad 139
25A Vertical and horizontal adjustable “T” arm with standard 10 pad 110
62 www.rfmseating.com
Arm B C D E F G L (com) (col)Arm Options
Armless 1409 1432 1465 1510 1571 1668 1858
MANAGERS H IGH BACK Ratchet back, balance syncro 06-control; long, easy-access cylinder paddle
MANAGERS H IGH BACK Ratchet back with heavy duty, multi-function infinite tilt lock 50 control; long, easy-access cylinder paddle
Armless 1424 1447 1480 1525 1586 1683 1873
Arm B C D E F G L (com) (col)
Arm B C D E F G L (com) (col)
8536 Task
85350 Task
SIERRA 8 5 0 0ST
ANDA
RD F
EATU
RES
O P T I O N S See pages 85-86 for additional options
n 500 lb. weight limitn Dual density seat foamn Seat pan structure is 7/8”
thick 10 ply hardwoodn 28” black nylon
reinforced basen 70 mm heavy duty
castersn Fully upholstered
out back in black air knit
n Extended back barn Meets CAL 117n Standard seat height
approx. range for model pictured (floor to top of seat): 18 3/4” to 22 1/4”(with 100mm cylinder)
Model 8536
back width24 1/2”
seat width26”
backheight25 1/2”
seat depth20 1/2”
Not available: 04, 08, 09, 18, 23, 24 & 37A arms, seat slider, foot ring, 25R Foam
n #77P Soft Gel pad 58n #60L Air lumbar 125n #65HR Articulating
headrest 316
SIER
RAPO
PULA
R OP
TION
S
SEAT
SIZ
E OP
TION
S
LIST PRICE852 Small
26 w x 18 1/2 d N/C856 Large
26 w x 22 1/2 d N/C
01A Fold away arm with vertical and horizontal adjustment and standard 10 pad 199
03A Loop arm with vertical and horizontal adjustment 199
12A Vertical and horizontal adjustable “T” arm with knob and standard 10 pad 139
25A Vertical and horizontal adjustable “T” arm with standard 10 pad 110
63www.rfmseating.com
Arm B C D E F G L (com) (col)Arm Options
Armless 278 285 295 308 324 357 414
Armless 460
SQUARE FOOT STOOL 140mm cylinder standard *other cylinder sizes & casters available, specify on order
ROUND FOOT STOOL140mm cylinder standard *other cylinder sizes & casters available, specify on order
URETHANE STOOL37200 stool kit* *other cylinder sizes & casters available, specify on order
CAL 133 or arms not available Cannot be upholstered
Armless 299 306 316 329 345 378 435
Arm B C D E F G L (com) (col)
Arm B C D E F G L (com) (col)
Arm B
5911 Stool
5931 Stool
5951 Stool
STOOLS 5 9 0 0ST
ANDA
RD F
EATU
RES
O P T I O N S See pages 85-86 for additional options
STAN
DARD
FEA
TURE
S
Model 5931
seat diameter16”
Model 5911
seat depth18”
seat width22”
Model 5911 Model 5931
O P T I O N S No additional options available for this chair
n 250 lb. weight limitn Standard seat height
approx. range (floor to top of seat): 18 1/4” to 23 1/4” (model 5911 with 140mm cylinder); 17” to 22” (model 5931 with 140mm cylinder)
STAN
DARD
FEA
TURE
S
back width16”
seat width18”
Model 5951Note: please specify stool kit 37200 or 37270
seat depth16 3/4”
back height
12”
n 250 lb. weight limitn 37 foot ring with heavy
duty sleeven Standard seat height
approx. range for model pictured (floor to top of seat): 20 1/4” to 27 1/4 ” (with 200mm cylinder)
For 31” - 39” counter heights - request 200 mm cylinder For 34” - 44” counter heights - request 270 mm cylinder
64 www.rfmseating.com
Arm B C D E F G L (com) (col)
Arm B C D E F G L (com) (col)
Arm Options
Arm Options
Armless 601 624 657 702 763 860 1050
09A 605 628 661 706 767 864 1054
MANAGERS H IGH BACK Ratchet back, Multi-function 05-control w/seat slider
MANAGERS H IGH BACK Ratchet back, swivel tilt 07-control w/seat slider and reverse C-arm
MANAGERS H IGH BACK Ratchet back, multi-function 08-control w/seat slider, knee tilt
MANAGERS H IGH BACK Synchro tilt control w/built-in seat slider and ratchet back
Armless 505 528 561 606 667 764 954
Armless 505 528 561 606 667 764 954
Arm B C D E F G L (com) (col)
Arm B C D E F G L (com) (col)
Arm B C D E F G L (com) (col)
Arm B C D E F G L (com) (col)
1435 Task
1437 Task
1438 Task
14314 Task
01A Fold away arm with vertical and horizontal adjustment and standard 10 pad 199
08A 3 position pivot, vertically and horizontally adjustable arm with standard 10 pad 128
23A Forward angled vertically and horizontally adjustable arm with 10 pad 125
25A Vertical and horizontal adjustable “T” arm with standard 10 pad 110
37A 4-way, multifunction, vertical and horizontal adjustment w/pad. Pads cannot be changed. 153
TECH 1 4 0 0
Model 14314
STAN
DARD
FEA
TURE
S n 300 lb. weight limitn 55mm dual hooded black castersn Meets CAL 117n 27” high hub basen Standard seat height approx. range
for model pictured (floor to top of seat): 19” to 22 1/4” (with 1101 cylinder)
backheight21 1/2”
back width19”
seat depth18 1/2”
seat width21”
n #77P Soft Gel pad 58
n #25F R Foam 75TECH
POPU
LAR
OPTI
ONS
SEAT
SIZ
E OP
TION
S LIST PRICE420 X-Small
18 1/2 w x 17 d N/C 422 Small
20 1/2 w x 17 1/2 d N/C429 Large
22 w x 20 d N/C1100 X-Small Tractor
19 3/4 w x 19 3/4 d 50
LIST PRICE1200 Small Tractor
22 w x 19 3/4 d 501300 Medium Tractor
22 1/2 w x 20 1/4 d 501500 Deep Tractor
24 1/4 w x 19 3/4 d 1501900 Tractor
21 w x 19 d N/C
No ESD, Multi-shift options or Bariatric models
65www.rfmseating.com
Model 1445
Arm B C D E F G L (com) (col)
Arm B C D E F G L (com) (col)
Arm Options
Arm Options
Armless 721 741 764 817 871 953 1092
09A 725 745 768 821 875 957 1096
MANAGERS H IGH BACK Ratchet back, Multi-function 05-control w/seat slider
MANAGERS H IGH BACK Ratchet back, swivel tilt 07-control w/seat slider and reverse C-arm
MANAGERS H IGH BACK Ratchet back, multi-function 08-control w/seat slider, knee tilt
MANAGERS H IGH BACK Synchro tilt control w/built-in seat slider and ratchet back
Armless 625 645 668 721 775 857 996
Armless 625 645 668 721 775 857 996
Arm B C D E F G L (com) (col)
Arm B C D E F G L (com) (col)
Arm B C D E F G L (com) (col)
Arm B C D E F G L (com) (col)
1445 Task
1447 Task
1448 Task
14414 Task
01A Fold away arm with vertical and horizontal adjustment and standard 10 pad 199
08A 3 position pivot, vertically and horizontally adjustable arm with standard 10 pad 128
23A Forward angled vertically and horizontally adjustable arm with 10 pad 125
25A Vertical and horizontal adjustable “T” arm with standard 10 pad 110
37A 4-way, multifunction, vertical and horizontal adjustment w/pad. Pads cannot be changed. 153
TECH 1 4 0 0ST
ANDA
RD F
EATU
RES n 300 lb. weight limit
n 55mm dual hooded black castersn Meets CAL 117n 27” high hub basen Standard seat height approx. range
for model pictured (floor to top of seat): 19“ to 22 1/4” (with 1101 cylinder)
backheight21 1/2”
back width19”
seat depth18 1/2”
seat width21”
n #77P Soft Gel pad 58
n #25F R Foam 75TECH
POPU
LAR
OPTI
ONS
SEAT
SIZ
E OP
TION
S LIST PRICE420 X-Small
18 1/2 w x 17 d N/C 422 Small
20 1/2 w x 17 1/2 d N/C429 Large
22 w x 20 d N/C1100 X-Small Tractor
19 3/4 w x 19 3/4 d 50
LIST PRICE1200 Small Tractor
22 w x 19 3/4 d 501300 Medium Tractor
22 1/2 w x 20 1/4 d 501500 Deep Tractor
24 1/4 w x 19 3/4 d 1501900 Tractor
21 w x 19 d N/C
No ESD, Multi-shift options or Bariatric models
66 www.rfmseating.com
Arm B C D E F G L (com) (col)Arm Options
Armless 720 743 776 821 882 979 1169
MANAGERS H IGH BACK STOOL Multi-function 33-control w/ ratcheting back
MANAGERS H IGH BACK STOOL Multi-function 33-control w/ ratcheting back
Armless 600 623 656 701 762 859 1049
Arm B C D E F G L (com) (col)
Arm B C D E F G L (com) (col)
14333-37200 Stool
14433-37200 Stool
STOOLS 1 4 0 0
O P T I O N S See pages 85-86 for additional options Model 14333
Model 14433shown with 16 base-200mm
O P T I O N S No additional options available for this chair
For 31” - 39” counter heights - request 200 mm cylinder For 34” - 44” counter heights - request 270 mm cylinder
STAN
DARD
FEA
TURE
S n 300 lb. weight limitn 55mm dual hooded black castersn Meets CAL 117n 27” high hub basen Standard seat height approx. range
for model pictured (floor to top of seat): 26 1/2” to 33 1/2”
backheight21 1/2”
back width19”
seat depth18 1/2”
seat width21”
STAN
DARD
FEA
TURE
S n 300 lb. weight limitn 55mm dual hooded black castersn Meets CAL 117n 27” high hub basen Standard seat height approx. range
for model pictured (floor to top of seat): 28“ to 35 1/4”
backheight21 1/2”
back width19”
seat depth18 1/2”
seat width21”
SEAT
SIZ
E OP
TION
S LIST PRICE420 X-Small
18 1/2 w x 17 d N/C 422 Small
20 1/2 w x 17 1/2 d N/C429 Large
22 w x 20 d N/C1100 X-Small Tractor
19 3/4 w x 19 3/4 d 50
LIST PRICE1200 Small Tractor
22 w x 19 3/4 d 501300 Medium Tractor
22 1/2 w x 20 1/4 d 501500 Deep Tractor
24 1/4 w x 19 3/4 d 1501900 Tractor
21 w x 19 d N/C
Note: please specify stool kit 37200 or 37270
Note: please specify stool kit 37200 or 37270
n #33SS Seat slider 50
n #16B Foot ring base N/Cw/60mm no hood caster. Only available in 175mm or 200mm cylinder.
STOO
LSPO
PULA
R OP
TION
S
No ESD, Multi-shift options or Bariatric models
No ESD, Multi-shift options or Bariatric models
67www.rfmseating.com
01A Fold away arm with vertical and horizontal adjustment and standard 10 pad 199
08A 3 position pivot, vertically and horizontally adjustable arm with standard 10 pad 128
23A Forward angled vertically and horizontally adjustable arm with 10 pad 125
25A Vertical and horizontal adjustable “T” arm with standard 10 pad 110
37A 4-way, multifunction, vertical and horizontal adjustment w/pad. Pads cannot be changed. 153
TUXEDO 4 5 0 0
Arm B C D E F G L (com) (col)Arm Options
Armless 979 1002 1035 1080 1141 1238 1428
Armless 955 978 1011 1056 1117 1214 1404
MED IUM BACK Ratchet back, multi-function 05-control w/seat slider
MED IUM BACK Ratchet back, multi-function 08-control w/seat slider, knee tilt
MED IUM BACK Deluxe forward pivot synchro 11-control w/built in seat slider and a ratchet back.
Armless 883 906 939 984 1045 1142 1332
Arm B C D E F G L (com) (col)
Arm B C D E F G L (com) (col)
Arm B C D E F G L (com) (col)
4515 Task
4518 Task
45111 Task
Arm B C D E F G L (com) (col)Arm Options
Armless 883 906 939 984 1045 1142 1332
Armless 858 881 914 959 1020 1117 1307
MED IUM BACK Synchro tilt control w/built-in seat slider and ratchet back
MED IUM BACK Mid-pivot swivel tilt 15-control w/tilt lock dual action lever and reverse C-arm
MED IUM BACK Swivel tilt 07-control and ratchet back w/seat slider
09A 943 966 999 1044 1105 1202 1392
Arm B C D E F G L (com) (col)
Arm B C D E F G L (com) (col)
Arm B C D E F G L (com) (col)45114 Task
45115 Task
NS451 Task
STAN
DARD
FEA
TURE
S
O P T I O N S See pages 85-86 for additional options
n 300 lb. weight limitn 25” nylon basen 55 mm dual hooded black castersn Black air knit fabric outbackn Dual density seat foamn Two color upholstery availablen Meets CAL 117n Standard seat height approx. range for
model pictured (floor to top of seat): 18” to 21 1/2” (with 100mm cylinder)
seat width19 1/2”
backheight22 3/4”
back width20 1/4”
seat depth18 1/2”
Model 45111
n #77P Soft Gel pad 58
n #25F R Foam 75
n #60L Air lumbar 125
TUXE
DOPO
PULA
R OP
TION
S
SEAT
SIZ
E OP
TION
S LIST PRICE453 21 w x 20 d N/C459 22w x 21 1/2d N/C1100 X-Small Tractor
19 3/4 w x 19 3/4 d 501200 Small Tractor
22 w x 19 3/4 d 50
LIST PRICE1300 Medium Tractor
22 1/2 w x 20 1/4 d 501500 Deep Tractor
24 1/2 w x 19 3/4 d 1501900 Tractor
21 w x 19 d N/C
Customize this chair with your logo (option #63). Call Customer Service at (800) 447-5542 for information. See page 85 for photo.
68 www.rfmseating.com
01A Fold away arm with vertical and horizontal adjustment and standard 10 pad 199
08A 3 position pivot, vertically and horizontally adjustable arm with standard 10 pad 128
23A Forward angled vertically and horizontally adjustable arm with 10 pad 125
25A Vertical and horizontal adjustable “T” arm with standard 10 pad 110
37A 4-way, multifunction, vertical and horizontal adjustment w/pad. Pads cannot be changed. 153
TUXEDO 4 5 0 0
Arm B C D E F G L (com) (col)Arm Options
Armless 1010 1033 1066 1111 1172 1269 1459
Armless 986 1009 1042 1087 1148 1245 1435
MANAGERS H IGH BACK Ratchet back, multi-function 05-control w/seat slider
MANAGERS H IGH BACK Ratchet back, multi-function 08-control w/seat slider, knee tilt
MANAGERS H IGH BACK Deluxe forward pivot synchro 11-control w/built in seat slider and a ratchet back.
Armless 914 937 970 1015 1076 1173 1363
Arm B C D E F G L (com) (col)
Arm B C D E F G L (com) (col)
Arm B C D E F G L (com) (col)
4535 Task
4538 Task
45311 Task
Arm B C D E F G L (com) (col)Arm Options
Armless 914 937 970 1015 1076 1173 1363
Armless 889 912 945 990 1051 1148 1338
MANAGERS H IGH BACK Synchro tilt control w/built-in seat slider and ratchet back
MANAGERS H IGH BACK Mid-pivot swivel tilt 15-control w/tilt lock dual action lever and reverse C-arm
MANAGERS H IGH BACK Swivel tilt 07-control and ratchet back w/seat slider
09A 974 997 1030 1075 1136 1233 1423
Arm B C D E F G L (com) (col)
Arm B C D E F G L (com) (col)
Arm B C D E F G L (com) (col)45314 Task
45315 Task
NS453 Task
n #77P Soft Gel pad 58
n #25F R Foam 75
n #60L Air lumbar 125
TUXE
DOPO
PULA
R OP
TION
S
SEAT
SIZ
E OP
TION
S LIST PRICE451 19 1/2 w x 18 1/2 d N/C459 22w x 21 1/2d N/C1100 X-Small Tractor
19 3/4 w x 19 3/4 d 501200 Small Tractor
22 w x 19 3/4 d 50
LIST PRICE1300 Medium Tractor
22 1/2 w x 20 1/4 d 501500 Deep Tractor
24 1/2 w x 19 3/4 d 1501900 Tractor
21 w x 19 d N/C
Customize this chair with your logo (option #63). Call Customer Service at (800) 447-5542 for information. See page 85 for photo.
STAN
DARD
FEA
TURE
S
O P T I O N S See pages 85-86 for additional options
n 300 lb. weight limitn 27” nylon basen 55 mm dual hooded black castersn Black air knit fabric outbackn Dual density seat foamn Two color upholstery availablen Meets CAL 117n Standard seat height approx. range for
model pictured (floor to top of seat): 19 1/2” to 23” (with 100mm cylinder)
back width21 1/2”
seat width21”
backheight
26”
seat depth20”
Model 4535
69www.rfmseating.com
01A Fold away arm with vertical and horizontal adjustment and standard 10 pad 199
08A 3 position pivot, vertically and horizontally adjustable arm with standard 10 pad 128
23A Forward angled vertically and horizontally adjustable arm with 10 pad 125
25A Vertical and horizontal adjustable “T” arm with standard 10 pad 110
37A 4-way, multifunction, vertical and horizontal adjustment w/pad. Pads cannot be changed. 153
TUXEDO 4 5 0 0
Arm B C D E F G L (com) (col)Arm Options
Armless 1119 1149 1188 1252 1334 1460 1678
Armless 1047 1077 1116 1180 1262 1388 1606
Armless 1143 1173 1212 1276 1358 1484 1702
EXECUT IVE H IGH BACK Ratchet back, multi-function 05-control w/seat slider
EXECUT IVE H IGH BACK Ratchet back, multi-function 08-control w/seat slider, knee tilt
EXECUT IVE H IGH BACK Deluxe forward pivot synchro 11-control w/built in seat slider and a ratchet back.
EXECUT IVE H IGH BACK Synchro tilt control w/built-in seat slider and ratchet back
Armless 1047 1077 1116 1180 1262 1388 1606
Arm B C D E F G L (com) (col)
Arm B C D E F G L (com) (col)
Arm B C D E F G L (com) (col)
Arm B C D E F G L (com) (col)
4585 Task
4588 Task
45811 Task
45814 Task
STAN
DARD
FEA
TURE
S
O P T I O N S See pages 85-86 for additional options
n 300 lb. weight limitn 27” nylon basen 55 mm dual hooded black castersn Meets CAL 117n Dual density seat foamn Two color upholstery availablen Black air knit fabric on outbackn Standard seat height approx. range for
model pictured (floor to top of seat): 18 1/2” to 22” (with 100mm cylinder)
back width22”
seat width21”
backheight
30”
seat depth20”
Model 45811
n #77P Soft Gel pad 58
n #25F R Foam 75
n #60L Air lumbar 125
TUXE
DOPO
PULA
R OP
TION
S
SEAT
SIZ
E OP
TION
S LIST PRICE451 19 1/2 w x 18 1/2 d N/C459 22w x 21 1/2d N/C1100 X-Small Tractor
19 3/4 w x 19 3/4 d 501200 Small Tractor
22 w x 19 3/4 d 50
LIST PRICE1300 Medium Tractor
22 1/2 w x 20 1/4 d 501500 Deep Tractor
24 1/2 w x 19 3/4 d 1501900 Tractor
21 w x 19 d N/C
Customize this chair with your logo (option #63). Call Customer Service at (800) 447-5542 for information. See page 85 for photo.
No 65 headrest option
70 www.rfmseating.com
VERTE 2 2 0 0
Arm B C D E F G L (com) (col)Arm Options
23A 2202 2222 2243 2298 2366 2468
23A 2304 2324 2345 2400 2468 2570
EXECUT IVE BACK W/ADJUSTABLE HEADREST Deluxe forward pivot syncro 11-control, aluminum ribs, seat slider
EXECUT IVE BACK W/ADJUSTABLE HEADREST Deluxe forward pivot syncro 11-control, black ribs, seat slider
VERTE TASK Multi-function 05-control, nylon base, black ribs, w/seat slider
24A 2450 2470 2491 2546 2614 2716
Arm B C D E F G (com) (col)
Arm B C D E F G (com) (col)
Arm B C D E F G (com) (col)
22011 Task
22111 Task
22305 Task
STAN
DARD
FEA
TURE
S
O P T I O N S See pages 85-86 for additional options
STAN
DARD
FEA
TURE
S n Dual density seat foamn 300 lb. weight limitn 11 torsion spring loaded joints take an exact spine
impression which can be locked in placen Upholstered outback with black air knit fabricn Meets CAL 117n Black leather standardn Not available in CAL 133 or ESDn Standard seat height approx. range for model
pictured (floor to top of seat): 18 1/4” to 21 3/4” (with 100mm cylinder)
backheight
30”
back width19 1/2”
seat depth20”
seat width21 1/2”
Model 22111
O P T I O N S No additional options available for this chair
adjustable7 1/2”
LIST PRICEV10 Small
20 1/4 w x 18 1/2 d N/CV30 Large
22 1/2 w x 21 d N/C
SEAT
SIZ
E OP
TION
SST
ANDA
RD F
EATU
RES n Dual density seat foam
n 300 lb. weight limitn 11 torsion spring loaded joints take an exact spine
impression which can be locked in placen Upholstered outback with black air knit fabricn Meets CAL 117n Black leather standardn Not available in CAL 133 or ESDn Standard seat height approx. range for model
pictured (floor to top of seat): 19 1/2” to 23” (with 100mm cylinder)
backheight22 1/2”
back width19 1/2”
seat depth20”
seat width21 1/2”
Model 22305
No multi-shift option or Bariatric models
71www.rfmseating.com
380 Conference
390 Conference
09A 829 852 885 930 991 1088 1278
09A 860 883 916 961 1022 1119 1309
Arm B C D E F G L (com) (col)
Arm B C D E F G L (com) (col)
MED IUM BACK Mid-pivot swivel tilt 15-control with pneumatic lift & tilt lock dual action lever and reverse C-arm
MANAGERS H IGH BACK Mid-pivot swivel tilt 15-control with pneumatic lift & tilt lock dual action lever and reverse C-arm
WINK 3 8 0
STAN
DARD
FEA
TURE
S
O P T I O N S See pages 81-82 for additional options
STAN
DARD
FEA
TURE
SST
ANDA
RD F
EATU
RES
backheight22 1/2”
back width20 1/2”
seat depth18”
seat width21 1/4”
backheight
26”
back width20 1/2”
seat depth19”
seat width21 1/4”
n 300 lb. weight limitn 27” nylon basen 55 mm dual hooded black castersn Fully upholstered outback in black air knit n Meets CAL 117n Standard seat height approx. range for
model pictured (floor to top of seat): 17 3/4” to 21 1/4” (with 100mm cylinder)
n 300 lb. weight limitn 27” nylon basen 55 mm dual hooded black castersn Fully upholstered outback in black air knit n Meets CAL 117n Standard seat height approx. range for
model pictured (floor to top of seat): 17 3/4” to 21 1/4” (with 100mm cylinder)
Model 380
Model 390
O P T I O N S
O P T I O N S
No additional options available for this chair
No additional options available for this chair
72 www.rfmseating.com
backheight22 1/2”
back width20 1/2”
seat depth18”
seat width21 1/4”
WINK 3 9 0ST
ANDA
RD F
EATU
RES
O P T I O N S See pages 85-86 for additional options
Model 39211
n 300 lb. weight limitn 27” nylon basen 55 mm dual hooded black castersn Fully upholstered outback in black air
knit n Meets CAL 117n Standard seat height approx. range for
model pictured (floor to top of seat): 17 3/4” to 21 1/4” (with 100mm cylinder)
O P T I O N S No additional options available for this chair
3925 Task
Arm B C D E F G L (com) (col)Arm Options
MED IUM BACK Ratchet back, multi-function 05-control w/seat slider
MED IUM BACK Ratchet back, multi-function 08-control w/seat slider, knee tilt
MED IUM BACK Synchro tilt control w/built-in seat slider and ratchet back
MED IUM BACK Swivel tilt 07-control and ratchet back w/seat slider
3928 Task
39214 Task
NS392 Task
Armless 816 839 872 917 978 1075 1265
Armless 912 935 968 1013 1074 1171 1361
Armless 816 839 872 917 978 1075 1265
Armless 791 814 847 892 953 1050 1240
Arm B C D E F G L (com) (col)
Arm B C D E F G L (com) (col)
Arm B C D E F G L (com) (col)
Arm B C D E F G L (com) (col)
01A Fold away arm with vertical and horizontal adjustment and standard 10 pad 199
08A 3 position pivot, vertically and horizontally adjustable arm with standard 10 pad 128
23A Forward angled vertically and horizontally adjustable arm with 10 pad 125
25A Vertical and horizontal adjustable “T” arm with standard 10 pad 110
37A 4-way, multifunction, vertical and horizontal adjustment w/pad. Pads cannot be changed. 153
73www.rfmseating.com
backheight
26”
back width20 1/2”
seat depth19”
seat width21 1/4”
WINK 3 9 0ST
ANDA
RD F
EATU
RES
O P T I O N S See pages 85-86 for additional options
Model 39311
n 300 lb. weight limitn 27” nylon basen 55 mm dual hooded black castersn Fully upholstered outback in black air
knit n Meets CAL 117n Standard seat height approx. range for
model pictured (floor to top of seat): 17 3/4” to 21 1/4” (with 100mm cylinder)
O P T I O N S No additional options available for this chair
3935 Task
Arm B C D E F G L (com) (col)Arm Options
MANAGERS H IGH BACK Ratchet back, multi-function 05-control w/seat slider
MANAGERS H IGH BACK Ratchet back, multi-function 08-control w/seat slider, knee tilt
MANAGERS H IGH BACK Synchro tilt control w/built-in seat slider and ratchet back
MANAGERS H IGH BACK Swivel tilt 07-control and ratchet back w/seat slider
3938 Task
39314 Task
NS393 Task
Armless 849 872 905 950 1011 1108 1298
Armless 945 968 1001 1046 1107 1204 1394
Armless 849 872 905 950 1011 1108 1298
Armless 824 847 880 925 986 1083 1273
Arm B C D E F G L (com) (col)
Arm B C D E F G L (com) (col)
Arm B C D E F G L (com) (col)
Arm B C D E F G L (com) (col)
01A Fold away arm with vertical and horizontal adjustment and standard 10 pad 199
08A 3 position pivot, vertically and horizontally adjustable arm with standard 10 pad 128
23A Forward angled vertically and horizontally adjustable arm with 10 pad 125
25A Vertical and horizontal adjustable “T” arm with standard 10 pad 110
37A 4-way, multifunction, vertical and horizontal adjustment w/pad. Pads cannot be changed. 153
74 www.rfmseating.com
FLAME RETARDANT PROGRAM ( C A L 1 3 3 )
All seating manufactured by RFM is made to comply with California Technical Bulletin 117 and BIFMA F-1-1978 unless a customer’s own material (COM) is used, in which case RFM cannot guarantee the flame retardant properties of the fabric.
RFM seating products can be ordered to meet California Technical Bulletin 133 (CAL 133). CAL 133 is a full composite burn test which was designed for furniture which is used in public and private buildings. This test does not specify how to construct any furniture; however it does tell how well each piece of furniture will perform under a controlled burn. The solution to this problem is to use a fire barrier between the fabric and the foam. This barrier will help extinguish the fire by smothering the flame.
For additional information regarding CAL 133 fully upholstered seating protection, please contact the California Bureau of Home Furnishing and Thermal Insulation.
For pricing and ordering information see the options page on pages 85-86.
RFM will not accept any C.O.M. orders which have to pass CAL 133.
For additional information regarding CAL 133 please contact RFM Customer Service at 800.447.5542 or [email protected]
ELECTROSTATIC DISCHARGE OPTION
The RFM ESD Chair option is available on all task chairs (excluding Echelon, Ray, Rainier, Tech and all mesh seating) as an additional option. This option is used on chairs that are in a static sensitive environment.
THE ESD OPTION PACKAGE INCLUDES THE FOLLOWING:1. ESD conductive fabric with superior surface
conductivity with easy to clean and extremely high abrasion resistance ratings – standard.
2. Chrome lift cylinders, five-legged base, and con-toured back bars provide all chrome metal parts for highly functional static control and durable easy to clean surface – standard.
3. ESD heavy duty casters either for carpet or hard floor production environments – standard.
4. ESD drag chain for added protection and identifi-cation – standard.
ADDITIONAL ESD ACCESSORIESn ESD adjustable arm rests
n ESD chrome plated footrests are available with the counter height stool options
STATIC DISCHARGE TESTING DATASurface resistivity Resistance measured at 100vleft side of seat to r.h. side ...................... 2.4 (108) ohms/square left side of back to r.h. side ..................... 2.2 (108) ohms/squareTesting results shown above conducted at 50 ± 5% rh and 73 ± 5° f test date 8-1-97
Resistance to groundable point ..... Resistance measured at 100v surface of seat to ground ....................................2.0 (108) ohms surface of back to ground ....................................2.0 (108) ohms rear surface back to ground .................................2.0 (108) ohms arm l.h. & r.h. average to ground .........................2.0 (108) ohms foot rest (where required) to ground .....................2.0 (108) ohms base (where required) to ground ..........................2.0 (106) ohmsElectrodes used in testing confirm to ANSI/EOS/ESD - S41 - 1990. Test results certified to meet procedures and requirements of ESD DS 12.1 - 1995. Detail test reports available upon request
75www.rfmseating.com
RFM PRODUCT WARRANTY
RFM Seating products are engineered to provide many years of use under normal conditions when cared for properly. Normal conditions are defined as an office environment during a single shift consisting of 8-hour days, 5 days a week for a user weighing 300 pounds or less. Products manufactured by RFM carry the following limited lifetime warranties to the original purchaser:
All ergonomic, task & conference chairs: Lifetime warranty on cylinder, 12 years on all other parts.
All Multi-Shift and Nurse’s Station: 7 year warranty on all parts.
All Big and Tall chairs: Lifetime warranty on cylinder, 7 years on all other parts.
All guest and lobby chairs: Lifetime warranty on all steel and wood frames, 5 years on all other components.
Essentials chairs: 5 years on all components.
· SEAT AND BACK FABRIC IS COVERED FOR FIVE YEARS AND NOT WARRANTEED FOR MULTI-SHIFT OPERATIONS
· Any product, which has been repaired or altered by the customer.
· Any variation in color, grain, or texture of wood, leather, or fabric.
· Any incidental damage resulting from the neglect or inability to use RFM products properly with regular maintenance.
· Any normal wear and tear. The warranty is a protection from defects only.
· Warranties are NOT transferable.
To make claim under this warranty, the claim must be processed through the original dealer of purchase. The dealer will inspect for warranty qualifications and must obtain a return material authorization (RMA) number from RFM. RFM shall provide, at our option, parts, replacements or monetary adjustments. Labor is not covered under warranty. The warranties indicated above are the only warranties made by RFM and no other warranties expressed or implied are given on products manufactured by RFM.
The return of products will NOT be accepted without an RMA number issued by RFM Customer Service. All returned products must be protected to prevent damage in transit and shipped pre-paid. The warranty form can be found on page 75.
THE ABOVE WARRANTIES EXCLUDE THE FOLLOWING:
Effective October 1, 2009
76 www.rfmseating.com
WHERE IS THE PROBLEM?Please mark on the above diagrams where the problem(s) is.
Describe the problem for us ________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
WE NEED SOME INFO : (You can find the answers to these questions on your chair’s seat tag located underneath the seat.)
P.O.# ____________________________________ SO# _______________________________________
Date ____________________________________ Model # ___________________________________
Fabric ___________________________________
WE NEED A LITTLE MORE INFO:
Company _______________________________________________________________________________
Name _____________________________________________ Phone _______________________________
SHIP TO: Address ________________________________________________________________________
City _______________________________________________ State ____________ Zip Code ___________
THANK YOU for taking the time to let us know you have an issue with one of our chairs. We will take care of this for you immediately. We hope you have a great day!
Fax to RFM Customer Service 800.734.6377 or email to [email protected]
ARM PAD
ARM BRACKET
SEAT
BASECASTER
BACK
CYLINDER
BACK BAR
CONTROL
WARRANTY REQUEST FORM
77www.rfmseating.com
C.O.M. ORDER FORM
Attach fabric sample here in direction it should appear on chair.
C.O.M. must be shipped PREPAIDand must show the following:• Customer’s name,• Customer’s purchase order number,• Fabric supplier’s name,• Fabric name & number.
Shipping instructions
Special instructions
Any missing information will cause shipment delays.RFM reserves the right to requote any C.O.M. fabric.
RFM RFMCustomer Service Customer Service619 S.W. Wood St. 1213 136th St.Hillsboro, OR 97123 Lansing, KS 66043
For all C.O.M. fabric call for ship to address
CHAIRSTYLE #
FABRIC NAME AND #QUANTITY
1
2
3
4
Check for fabric direction:
All RFM seating is available in customer’s own material (C.O.M.). Each order must be accom-panied by a copy of this form. Please provide a sample of the fabric with this form. Additional charges and instructions are listed on Customer’s Own Material instruction page.
DEALER NAME _______________________________________________________
ADDRESS ____________________________________________________________
CITY ____________________________ STATE ____________ ZIP ______________
TELEPHONE __________________________________________________________
CHAIR P.O. # ______________________________________
Place fabric will be shipped from: CO. NAME __________________________________________________________
ADDRESS ____________________________________________________________
CITY ____________________________ STATE ____________ZIP _______________
TOTAL YARDAGE _____________________________________________________
Mailpurchaseorder with a copy of this form to:
RFMCustomer Service619 S.W. Wood St. Hillsboro, Oregon 97123 Phone (800) 447-5542Fax (800) 734-6377
}
C.O.M. FABRIC UPCHARGE I N S T R U C T I O N SPlease call customer service for Customer’s Own Material yardage requirements
MATCHING UPCHARGEThere will be an upcharge for C.O.M. fabric requiring centering a pattern, matching a stripe or plaid.
LIST PRICE
Metal Side/Guest Chairs, Executive Swivel & Task Chair $85.00
*The C.O.M. order form must be used on all orders — no exceptions*C.O.M. material should be shipped PREPAID and marked with the following information:
Dealer name and purchase order number Fabric pattern name and color
Supplier’s name, fabric name and color A sample of the fabric attached to the order The style numbers of the item in which the fabric is to be applied
Special application instructions
MATCHING AND CENTERING FABRICSFor certain chair designs, because of the curvature or upholstery techniques, C.O.M. fabrics or vinyl can only be applied by blind-tacking or special handling. Striped and patterned C.O.M. fabrics if requiring matching or centering will require adjustments in yardage. (Special quotations upon request.)
78 www.rfmseating.com
MAYER Fabric
Fabric GradeAbacus . . . . . . . . . . . .FAcanthus. . . . . . . . . . DAlcazar . . . . . . . . . . .EAmulot . . . . . . . . . . . CAmulot (Durablock). . . .EArcade . . . . . . . . . . . .EArtistry . . . . . . . . . . . CAscension . . . . . . . . . .FAxis . . . . . . . . . . . . . .EBar None . . . . . . . . . .FBebop . . . . . . . . . . . .FBella. . . . . . . . . . . . . .EBijou. . . . . . . . . . . . . DBrio . . . . . . . . . . . . . .FBroadway . . . . . . . . . DBungalow . . . . . . . . . .FCanvas . . . . . . . . . . . .FCavaler . . . . . . . . . . CCeltic . . . . . . . . . . . . .EClassic Velvet . . . . . . .ECribbage . . . . . . . . . .ECross Check . . . . . . . BCuddle Up . . . . . . . . .FDapper . . . . . . . . . . . CDaydream. . . . . . . . . .EDebonair . . . . . . . . . .FDestiny . . . . . . . . . . . CDestiny (Durablock) . . .EDomain. . . . . . . . . . . .FDuraweave 10 . . . . . BErode . . . . . . . . . . . . GFacets. . . . . . . . . . . . .FFantasy. . . . . . . . . . . GFigure Eight. . . . . . . . CFlourish. . . . . . . . . . . DFlower Power . . . . . . DFocal Point . . . . . . . . DForte. . . . . . . . . . . . . BGenesis . . . . . . . . . . CGenesis (Durablock) . . DGlee. . . . . . . . . . . . . DGusto . . . . . . . . . . . . .FHaberdash . . . . . . . . DHabitat . . . . . . . . . . . .EHoliday . . . . . . . . . . .E
Hoopla . . . . . . . . . . . DImpulse . . . . . . . . . . . DIn The Groove . . . . . . .EIn The Loop . . . . . . . . DInsignia. . . . . . . . . . . .FJubilee . . . . . . . . . . . GLocomotion . . . . . . . . DMadras. . . . . . . . . . . DMarrakesh . . . . . . . . .FMarquise . . . . . . . . . DMetro . . . . . . . . . . . . DMosaic . . . . . . . . . . . CMosaic (Durablock) . . .EMum . . . . . . . . . . . . CMum (Durablock) . . . . .ENew Dimension . . . . . GNostalgia . . . . . . . . . DNylon-Stat Esd . . . . . . .FOrbit . . . . . . . . . . . . .EPanache . . . . . . . . . . GPastime. . . . . . . . . . . .EPetit Point . . . . . . . . . .FPinnacle . . . . . . . . . . DPlaza . . . . . . . . . . . . .EPosh . . . . . . . . . . . . . DPrimo . . . . . . . . . . . . .EPulse. . . . . . . . . . . . . .FQuattro. . . . . . . . . . . BRapport . . . . . . . . . . DRevival . . . . . . . . . . . DRitz . . . . . . . . . . . . . DRound ‘n Round . . . . . .FSequel . . . . . . . . . . . CShantung . . . . . . . . . DSmart Suede . . . . . . . .ESojourn. . . . . . . . . . . CSojourn (Durablock) . . .ESolid Ground. . . . . . . .FSource . . . . . . . . . . . CSource (Durablock). . . .ESpotlight . . . . . . . . . . .FStanza . . . . . . . . . . . .FSunset Stripe . . . . . . . DSynapse . . . . . . . . . . .FTea Leaves. . . . . . . . . .ETendril . . . . . . . . . . . CTendril (Durablock) . . . .E
Tracery . . . . . . . . . . . .FUltima. . . . . . . . . . . . .EValor . . . . . . . . . . . . CValor (Durablock) . . . . .EVibrant . . . . . . . . . . . .EZanzibar. . . . . . . . . . .F
MAYER Environment
Acclaim . . . . . . . . . . .EButton Down . . . . . . . GBurst . . . . . . . . . . . . . .ECatalyst . . . . . . . . . . DCharade . . . . . . . . . . .FCircuit . . . . . . . . . . . GComponent . . . . . . . . DContours . . . . . . . . . . GEcosphere . . . . . . . . . .EElement. . . . . . . . . . . CEquation . . . . . . . . . . DEquinox . . . . . . . . . . DEsprit . . . . . . . . . . . . .EEuropa . . . . . . . . . . . .EFactor. . . . . . . . . . . . DFoundation 10. . . . . . BJenga . . . . . . . . . . . . .EKarma . . . . . . . . . . . .FKismet . . . . . . . . . . . .FLunar . . . . . . . . . . . . DMarvel . . . . . . . . . . . .FMaze . . . . . . . . . . . . .EMirage . . . . . . . . . . . .EMoonscape . . . . . . . . DMyriad . . . . . . . . . . . .FMystic. . . . . . . . . . . . DOn the Spot. . . . . . . . .FOxford . . . . . . . . . . . .FPortal . . . . . . . . . . . . .ERatio . . . . . . . . . . . . .FReiki . . . . . . . . . . . . . .FReplay . . . . . . . . . . . .FSwank . . . . . . . . . . . GTwister . . . . . . . . . . . .EVenue . . . . . . . . . . . . .E
MAYER Vinyl
All Seasons . . . . . . . . DAll Use . . . . . . . . . . . D
Fabric Grade Fabric GradeFabric Grade
Not all fabrics shown. Call Customer Service at (800) 447-5542 for more information.
Athens . . . . . . . . . . . .EBlocks. . . . . . . . . . . . DChaps . . . . . . . . . . . .ECharette Fr . . . . . . . . .EContempo Fr . . . . . . . .ECrystals . . . . . . . . . . .FCurlicue . . . . . . . . . . .EDakota . . . . . . . . . . . .EDublin Tweed . . . . . . .FGala . . . . . . . . . . . . .FGuardian . . . . . . . . . .EHeather Fr. . . . . . . . . .EImages Fr . . . . . . . . . .EInterlochen . . . . . . . . .EJamestown . . . . . . . . DKey Largo . . . . . . . . . DLinen . . . . . . . . . . . . DMicro Dot . . . . . . . . . .EPeerless . . . . . . . . . . .EPinehurst . . . . . . . . . . .EPrado . . . . . . . . . . . . .EPunch . . . . . . . . . . . . .ESilk Screen . . . . . . . . .ESilverweave. . . . . . . . .ESkate . . . . . . . . . . . . .FSketch . . . . . . . . . . . .ESlick . . . . . . . . . . . . . .FSpecial Black-Madrid . DSpecial Black-Oxen . . DSpecial Black-Sierra . . DSpecial Black-Wallaby DSpirograph . . . . . . . . .FTiles . . . . . . . . . . . . . .EToss Up. . . . . . . . . . . .ETributary . . . . . . . . . . .ETussah . . . . . . . . . . . .EUptown. . . . . . . . . . . .EVinyl Stat Esd. . . . . . . .FWebscape . . . . . . . . .FWillow . . . . . . . . . . . D
MAYER Lucia Cassa
Connections Fr. . . . . . .EDeco Motion . . . . . . . .FEnigma . . . . . . . . . . . GGlamour . . . . . . . . . . .EIllusion . . . . . . . . . . . G
FABRIC OPTIONS
79www.rfmseating.com
Fabric Grade
QUICKSHIP Fabric
Cross Check . . . . . . . . . . . . . . Imperial . . . . . . . . . . . . . . . . Otter . . . . . . . . . . . . . . Platinum . . . . . . . . . . . . Slate Black . . . . . . . . . . . . .Vermillion
Foundation . . . . . . . . . . . . . . Angora . . . . . . . . . . . Coffee Bean . . . . . . . . . . . . . . . Ebony . . . . . . . . . . . . . . . . Fossil . . . . . . . . . . . . . . . Goose . . . . . . . . . . . . . .Mercury . . . . . . . . . . . . . . . .Navy
Mainframe . . . . . . . . . . . . . Bay Blue . . . . . . . . . . . . .Cordovan . . . . . . . . . . . . . . . Pebble . . . . . . . . . . . . . . . Truffle
Moguls . . . . . . . . . . . . . . . . Flare . . . . . . . . . . . . . Graphite . . . . . . . . . . . . . . . . Java . . . . . . . . . . . . . . . .Navy . . . . . . . . . . . . . . . .Onyx . . . . . . . . . . . . . . Verdant . . . . . . . . . . . . . Waterfall
One Two Three . . . . . . . . . . . . . . . . Flare . . . . . . . . . . . . . .Monaco . . . . . . . . . . . . . . . .Storm . . . . . . . . . . .Sweet Potato . . . . . . . . . . . . . . . Taupe
Wiggle . . . . . . . . . . . . . . . . Basil . . . . . . . . . . . . . . . . Flare . . . . . . . . . . . . . .Monaco . . . . . . . . . . . . . . . . Otter . . . . . . . . . . .Sweet Potato . . . . . . . . . . . . . . Thunder
Not all fabrics shown. Call Customer Service at (800) 447-5542 for more information.
Jumpin’ Jacks. . . . . . . GLuxor . . . . . . . . . . . . GNatural Progression . . GNew Angles . . . . . . . GOracle . . . . . . . . . . . .FOttoman . . . . . . . . . . .FParadigm . . . . . . . . . .FPavilion. . . . . . . . . . . GSakura . . . . . . . . . . . GUndercurrent . . . . . . . G
MAYER Faux Leather
Antique. . . . . . . . . . . .ECaressa . . . . . . . . . . .ECaressa Suede . . . . . .ECayman . . . . . . . . . . GCork. . . . . . . . . . . . . .FCounterpoint . . . . . . . .FDurango . . . . . . . . . . DEmu . . . . . . . . . . . . . DFlorentino . . . . . . . . . DGlimmer . . . . . . . . . . .FHombre . . . . . . . . . . .FJekyl & Hyde . . . . . . . .EKobe . . . . . . . . . . . . DKomodo . . . . . . . . . . .ELaredo . . . . . . . . . . . GMakore. . . . . . . . . . . GMaverick. . . . . . . . . . DMelody. . . . . . . . . . . GMilano . . . . . . . . . . . .EOutback . . . . . . . . . . DPatent . . . . . . . . . . . . GPhoenix . . . . . . . . . . .EQuark. . . . . . . . . . . . GShimmer . . . . . . . . . . GUltrahide. . . . . . . . . . GVerona . . . . . . . . . . . .EVirtually . . . . . . . . . . .F
MOMENTUM Fabric
Acacia . . . . . . . . . . . .FAce . . . . . . . . . . . . . CAmenity . . . . . . . . . . .FAxis . . . . . . . . . . . . . CBandwidth. . . . . . . . . .FBento . . . . . . . . . . . . G
Boom . . . . . . . . . . . . DCandid . . . . . . . . . . . .ECienega . . . . . . . . . . GCinch . . . . . . . . . . . . CContext. . . . . . . . . . . CCore. . . . . . . . . . . . . BCrew . . . . . . . . . . . . .FDayspell . . . . . . . . . . .FDelve . . . . . . . . . . . . .FDrift . . . . . . . . . . . . . GDuo . . . . . . . . . . . . . .FElement. . . . . . . . . . . .FEpic . . . . . . . . . . . . . CEssentia . . . . . . . . . . .FFuse . . . . . . . . . . . . . BGauge . . . . . . . . . . . CGesture. . . . . . . . . . . .FGusto . . . . . . . . . . . . DHue . . . . . . . . . . . . . CIdiom . . . . . . . . . . . . GImpact . . . . . . . . . . . DInsight. . . . . . . . . . . . BIntermix. . . . . . . . . . . .EIntersect . . . . . . . . . . DInterval . . . . . . . . . . . BJargon . . . . . . . . . . . CKindle. . . . . . . . . . . . .FKnack. . . . . . . . . . . . CMatter . . . . . . . . . . . .FMedley . . . . . . . . . . . .EModa . . . . . . . . . . . . BOHS. . . . . . . . . . . . . GOrigin . . . . . . . . . . . BPerk . . . . . . . . . . . . . BPropensity . . . . . . . . . CQuirk . . . . . . . . . . . . DRatio . . . . . . . . . . . . BRealm . . . . . . . . . . . . DSavant . . . . . . . . . . . DSector. . . . . . . . . . . . CSense . . . . . . . . . . . . .FSolace . . . . . . . . . . . DSolo . . . . . . . . . . . . . .ESolo 2 . . . . . . . . . . . .EStance . . . . . . . . . . . DTangent. . . . . . . . . . . BTate . . . . . . . . . . . . . BTone . . . . . . . . . . . . . .E
Vario . . . . . . . . . . . . DVeer . . . . . . . . . . . . . .FVenue . . . . . . . . . . . . DVox . . . . . . . . . . . . . CWhim. . . . . . . . . . . . .FX-Factor . . . . . . . . . . .F
MOMENTUM Vinyl
Agora. . . . . . . . . . . . .EBeeline . . . . . . . . . . . DBravo . . . . . . . . . . . . .EBravo II . . . . . . . . . . . .ECanter . . . . . . . . . . . DCashmere . . . . . . . . . DEcho. . . . . . . . . . . . . .FEOU. . . . . . . . . . . . . .EForay . . . . . . . . . . . . .EIcon . . . . . . . . . . . . . .FMax . . . . . . . . . . . . . .EParagon . . . . . . . . . . .FPeriphery . . . . . . . . . .FRein . . . . . . . . . . . . . .ESublime . . . . . . . . . . .ETact . . . . . . . . . . . . . .ETetra. . . . . . . . . . . . . .E
MOMENTUM Crypton
Ardour . . . . . . . . . . . .ECrux. . . . . . . . . . . . . .FFeliz . . . . . . . . . . . . . .FHuntington . . . . . . . . .FIdyll . . . . . . . . . . . . . GInfusion. . . . . . . . . . . .FIsla. . . . . . . . . . . . . . DJest. . . . . . . . . . . . . . .FMelisa . . . . . . . . . . . GOath . . . . . . . . . . . . .ERedux . . . . . . . . . . . . .EScribe. . . . . . . . . . . . .ESoma . . . . . . . . . . . . GSway . . . . . . . . . . . . .FTelegram. . . . . . . . . . GViva . . . . . . . . . . . . . .F
Fabric Grade Fabric Grade
FABRIC OPTIONS
80 www.rfmseating.com
Tension Knob Turn clockwise to
increase tension, turn counter-clockwise to decrease tension.
Seat SliderWhile seated, pull
lever, push seat to desired depth and release lever to lock. Locks in 5 positions over 2 ½”.
Rest Position Adjustment
Loosen hand wheel (do not remove), and slide back to desired position, then re-tighten hand wheel.
Back Angle Adjustment
While seated, pull paddle up, when desired angle found push paddle down to lock. Back Free floats in the paddle up position.
Pneumatic Height
AdjustmentTo lower, lift paddle while seated. To raise, lift paddle with your weight off seat.
Forward TiltLean back in chair
and roll or pull lever forward for forward tilt, push or roll lever backward for straight position during rocking. Attention: lever can only be moved when in a rear rocking position.
Back Height Adjustment
Turn knob counter- clockwise to loosen, lift or lower chair back to desired position and re-tighten. Critical lumbar curve positioning.
CONTROL 01 Swivel task CONTROL 03 Tri-Action CONTROL 04 Multi-function
CONTROL 05 Ratchet
Back Multi-Function
CONTROL 06 Balance-Syncro
CONTROL 07 Swivel Tilter
CONTROL 08 Knee Tilt, Ratchet
Back, Multi-Function
w/built-in seat slider
CONTROL 11 Deluxe
Forward Pivot Syncro
w/built-in seat slider
CONTROL 14 Revo
Forward Pivot Syncro
w/built-in seat slider
F
F F
F
FF
F
C
DD
DD
HH
I
I
IA
AAA
L
J
L
M
G
L
KK
20˚
4˚ 6˚
17˚
17˚ 6˚
17˚
13˚
L
I
15˚ 18˚
4˚ 5˚
17˚ 3˚
8.5˚ 2.5˚
12˚ 0˚
10˚ 10˚10˚
2”adjustment
14˚
A
L
F
B
A
C
D
F
G
H
N
N
B
B B
17˚
17˚ 6˚
D
AA
CONTROL OPTIONS
81www.rfmseating.com
Infinite Seat Angle Adjust
with 6 Degree Forward TiltTo change seat angle, pull paddle up while seated, push paddle down to lock when desired angle is achieved. Seat can rock.
Infinite Seat Angle & Back
Angle Adjustment To change seat and back angle, pull paddle up while seated, push paddle down to lock in desired locations, seat and back free float/rock.
Infinite Position
Tilt LockTo lock chair in position, push paddle down. To allow free rocking movement, pull paddle up.
Ratchet Back Height
Adjustment Simply lift back to desired position and back locks automatically. To release and reset back position, lift back completely to bottom stop and then move up to the new position.
Pneumatic Height
Adjustment/Tilt Rock Lock Adjust to raise or lower seat (See F). The lever pushes in towards control to lock in the neutral position. Pull lever out to rock free.
Infinite Tilt/Lock Screw
Turn screw paddle to adjust seat tilt. Screw paddle system eliminates tilt slippage.
CONTROL 15 Knee Tilting
Conference Control
16˚ 3˚
17˚
18˚4˚
M
F
F
D
J
I
K
L
M
N
33 Seat Slider
CONTROL 50 Ratchet
Back Heavy Duty
Multi-Function
10˚
20˚1˚
CONTROL 20 Knee Tilting
Conference Control
A
A
K
A
NI
CONTROL 33 Ratchet
Back Tri-Action
15˚
6˚3˚
L L
I
D
F
CONTROL OPTIONS
82 www.rfmseating.com
CASTOR HEIGHT CYLINDER & BASE HEIGHT CONTROL THICKNESS SLIDER THICKNESS SEAT THICKNESS SEAT HEIGHT
2.687” 11.937” 2.562” 1.187” 3.75” 22.125”
8.75” 18.937”
EXAMPLE:
TECH 1400 (HIGH)
14314 (LOW)
SEAT HEIGHT CHART
In order to determine the height of a seat, you need to do the following calculation: seat thickness + the control + the cylinder + the base for your chosen chair model.
CONTROL
OPTION # / DESCRIPTION HEIGHTS
01 CONT 0.937”
03 CONT 2.937”
04 CONT 2.437”
05/36 CONT 2.562”
06 CONT 2.437”
07 CONT 2.375”
08 CONT 3.625”
11 CONT 2.5”
14 CONT 3.187”
15 CONT 2.062”
20 CONT 3.687”
22 CONT 0.812”
33 CONT 3”
80 CONT 3.625”
51 CONT 2.562”
Slider 1.187”
seat height
control height
cylinder height
base heightlow
high
top of base
CASTOR HEIGHT
OPTION # / DESCRIPTION HEIGHTS
55mm standard on base12, 13, & 18 2.5”
30C/hard floor 2.5”
911C/70mm heavy-duty 3.125”
911-30C/70mm hard floor 3.125”
20C/50mm hard floor reverse braking 2.375”
21C/50mm braking 2.312”
50mm ESD 2.312”
50mm hardfloor braking ESD 2.312”
50mm hardfloor ESD 2.312”
50mm locking 2.375”
30-31C/50mm hardfloor braking 2.375”
60mm chrome 2.5”
60mm standard on base16, 17, & 22 2.687”
30C/60mm hardfloor on base16, 17 & 22 2.687”
32C/glide 2.312”
83www.rfmseating.com
CYLINDER & BASE
OPTION # / DESCRIPTION HEIGHTS 65MM 70MM 100MM 1101 140MM 175MM 200MM 270MM
27B H 9.562” 10.75” 12.312” 10.062” 15.875” 17.875” 22.312” 27.562” Nylon reinforced L 6.812” 8.25” 8.812” 6.875” 10.75” 12.125” 15.25” 17.687”
Standard On H 10” 11” 12.562” N/A 16.125” 18.187” 22.687” 27.812” Medium Back L 7.25” 8.5” 9.062” N/A 11” 12.437” 15.625” 17.937”
Standard On H 9.625” 11.125” 12.687” N/A 16.25” 18.25” 22.812” 28” Managers High Back L 6.875” 8.625” 9.187” N/A 11.125” 12.5” 15.75” 18.125”
15B H 10” 11.062” 12.5” N/A 16.125” 18.125” 22.687” 27.875” Polished aluminum L 7.25” 8.562” 9” N/A 11” 12.375” 15.625” 18”
16B H N/A N/A 15.625” N/A 19.25” 21.25” 25.812” 30.875” Footring base L N/A N/A 12.125” N/A 14.125” 15.5” 18.75” 21”
Standard On H 11.437” 12.375” 14” 11.937” 17.625” 19.625” 24.062” 29.125” Echelon and Tech L 8.687” 9.875” 10.5” 8.75” 12.5” 13.875” 17” 19.25”
18B H N/A N/A 11.312” N/A 14.812” 16.812” 21.312” 26.375” Low profile L N/A N/A 7.812” N/A 9.687” 11.062” 14.25” 16.5”
19B H 13.5” 14.5” 16.062” 14” 19.562” 21.562” 26.062” 31.187” Jury Base L 10.75” 12” 12.562” 10.812” 14.437” 15.812” 19” 21.312”
28B H 10.25” 11.125” 12.625” 10.75” 16.25” 18.25” 22.687” 27.875” Aluminum reinforced L 7.5” 8.625” 9.125” 7.562” 11.125” 12.5” 15.625” 18”
Standard On H 10.25” 11.125” 12.625” N/A 16.25” 18.25” 22.687” 27.875” Verte 22011 L 7.5” 8.625” 9.125” N/A 11.125” 12.5” 15.625” 18”
22B H 11.937” 13” 14.625” 12.437” 18.125” 20” 24.687” 29.625” Polished high hub L 9.187” 10.5” 11.125” 9.25” 13” 14.25” 17.625” 19.75”
SEAT THICKNESS
OPTION # / DESCRIPTION HEIGHTS
Echelon - 1900 3.5”
Carmel - 8200 3.75”
Internet - 4800 3.75”
Protask - 5800 3.75”
Ray- 4200 3.75”
Multi-Shift - 8900 4”
1100, 1200 & 1300 4.5”
Tech - 1400 3.75”
1500 & 1600 4.5”
Rainier - 3600 4”
OPTION # / DESCRIPTION HEIGHTS
Tuxedo - 4500 4”
Verte - 2200 4”
Wink - 3900 4”
Metro - 2000 4”
Sierra - 8500 4.25”
Internet - BT 4”
Protask - BT 4”
Manhattan-6900 4”
Meshseat166/167 4”
84 www.rfmseating.com
HOW TO CONTACT US
Once you’ve selected the chair you want to purchase, it’s time to place your order. Our ordering system is based on a sequence of numbers that communicates to us the exact chair you would like. Use the outline shown below to assist you through this process. For additional assistance call us at 800-447-5542.
Use this sequence for designating your choices when ordering.
seriesmodel
controlpgs 80-81
armpg 86
seatsliderpg 86
arm padpg 86
additional optionspgs 85-86
fabric pattern, grade & color
pgs 78-79
arm pad
arm
seat slider
At RFM we take pride in our products and our customers who choose them, therefore we are here to assist you in any way we can.
ON THE WEBwww.rfmseating.com
CUSTOMER SERVICE PHONE800.447.5542 7am – 4:30pm (Pacific Standard Time)
CUSTOMER SERVICE FAX800.734.6377
MAILING ADDRESS619 SW Wood St., Hillsboro, OR 97123
HOW TO ORDER
SPECIALTY OPTIONS
Logo Options
STANDARD OPTIONS
63 Custom Logo Embroidery only at RFM
Want to make a memorable statement about your organization? RFM offers customized logo embroidery—a unique way to reinforce the branding of your company. The RFM Custom embroidered logo program is available on select models of our chairs including the Tuxedo 4500 series.
All Custom Logo orders require the following information:• Digital image emailed to: mreischman@
rfmseating.com with customer PO number.• Accepted file formats are jpeg, eps, tiff, psd,
embroidery file formats.• Logo size.• Thread color(s) to be embroidered (PMS color
is preferred).
• Chair fabric name and color.
STANDARD FEATURESLogo Size: 3.5” x 3.5” Stitch Count: 5000 Colors: 3 or less
LEAD-TIMECustom logo chair orders require additional lead-time to produce. Questions? – For all orders, please call Marlene Reischman at 800 447-5542 x 18 for pricing and delivery information.
01A Fold away arm with vertical and horizontal adjustment and standard 10 pad 199
04A Swing arm with vertical and horizontal adjustment and standard 10 pad 270
08A 3 position pivot, vertically and horizontally adjustable arm with standard 10 pad 128
12A Vertical and horizontal adjustable “T” arm with knob and standard 10 pad 139
18A 360 degree pivot, vertically and horizontally adjustable arm with standard 10 pad 147
23A Forward angled vertically and horizontally adjustable arm with 10 pad 125
24A Chrome forward angled vertically and horizontally adjustable arm with 10 pad 156
25A Vertical and horizontal adjustable “T” arm with standard 10 pad 110
10P Standard Fuse pad N/C
13P Flame retardant pad (passes CAL 133 standards) 45
22P 3/4” low profile soft pad 95
44P 2” high soft pad 75
45P 2” high soft flame retardant kidney shaped pad with beading (passes CAL 133 standards) 95
77P Soft Gel Pad 58
78P Extra soft eclipse pad N/C
80P Diamond textured, durable soft-touch urethane pad N/C
03A Loop arm with vertical and horizontal adjustment 199
15B Polished aluminum base with 60mm chrome casters 124
18B Low profile base (not available w/65 or 70 mm cylinder) 52
22B Polished aluminum high hub base with 60mm casters 52
27B Nylon Reinforced 28” Base - Black finish 72
28B Aluminum Reinforced 28” Base - Black finish 72
20C Hard floor reverse braking casters (brake when seated) 85
21C Braking casters (brake when seat is empty) 30
30C Hard floor casters 28
31C Hard floor braking casters 56
32C Glides 28
911C 70 mm Heavy Duty Casters 45
65mm N/C
70mm N/C
100mm N/C
140mm N/C
175mm 40
200mm 40
270mm 40
25F R Foam Seat Option by RFM (memory foam) 75
26F Dual density foam 40
88F Flat seat foam 40
33SS Seat slider 2 1/2” travel 50
60L Air lumbar 125
61L Extra firm lumbar 25
64L Thoracic Ridge 75
Straight arm options
Arm pad options & accessories
Loop arm options
Bases
Casters
Cylinders
Seat foam options
Seat slider
Lumbar options
35TB Tail-bone cut-out (not available on all seats) 130
SPECIALTY OPTIONS
CAL 133 Fire guard for seat and back on chair 86
CAL 133 Ray & Rainier with upholstered outback in Hue black and fire guard seat and back 125
CAL 133 Echelon with Fireguard seat & bottom cloth with black aluminum base 125
ESD-Chrome ESD Chrome package (Use Grade F pricing of chair plus this option) 154
12ESD Vertically and horizontally adjustable ESD approved T arm with 22P upholstered ESD vinyl pads 222
41BB Shorter Back Bar (Specify Length) 35
14BB Longer Back Bar (4” longer) 22
29SP Arm width reduction (1“ total) Not available on 37A 40
98SP Arm height reduction (1” total) 28
99SP Arm height riser (1” total) 52
37FR Foot ring with heavy duty sleeve 95
16FR Foot ring base w/60mm no hood caster (only available with 175mm and 200mm cylinder) 95
58 Beading on Protask Series back in Vinyl 33
Coccyx cut-out seat options
Flame retardant option
Electrostatic Discharge option
Back bars
Spacer options
Foot rings
Beading
Headrest options
Custom seat options
65HR Articulating headrest 316
85 86
Please call Customer Service at 800-447-5542 for off the chair pricing.
09A Reverse C (non-adjustable) 125
20A Polished aluminum arms 195 (not available on all models)
37A 4-way, multifunction, vertical and horizontal adjustment w/pad. Pads cannot be changed. 153
Cutting down seat width or depth 71
Arm relocation 71Effective Date: June 1, 2014
For specific measurements, please see page 83.
Not available on the 1900 seat.
MAS tests and certifies ourchairs and components aslow-VOC emitting furniture