AGTREK was established in 2007 to provide Tasmanians with access to good value equipment for hobby farms, landscaping and property maintenance. Lifestyle machinery with low, fair price tags 1 59 Bindaree Road, Legana Tasmania 7277 Email: [email protected]www.agtrek.com.au Mob. 0407 522 296 Prices JANUARY 2018 Tractor Implements page 2 Sundries page 3 Workshop items pages 4 & 5 SIROMER and JINMA PARTS Many parts in stock …..If you have a question regarding parts, please don’t hesitate to ask. If we don’t have it, we can get it for you. AUGERS on special until sold 150mm (6”) $165 230mm (9”) $185 300mm (12”) $225 450mm (18”) $395 Gearbox connection suits 50.8mm (2”) with two pins/bolts
Transcript
AGTREK was established in 2007 to provide
Tasmanians with access to good value equipment for
hobby farms, landscaping and property maintenance.
SIROMER and JINMA PARTSMany parts in stock …..If you have a question regarding parts, please don’t hesitate to ask. If we don’t have it, we can get it for you.
AUGERS on special until sold
150mm (6”) $165
230mm (9”) $185
300mm (12”) $225
450mm (18”) $395
Gearbox connection suits
50.8mm (2”) with two pins/bolts
2Prices JANUARY 2018
AGTREK was established in 2007 to provide
Tasmanians with access to good value equipment for
hobby farms, landscaping and property maintenance.
Lifestyle machinery with low, fair price tags
These prices are for CASH or DIRECT DEPOSIT. All prices include GST
JM164Y 4WD tractor with loader (new) $11500Capable mini tractor with:
3 cylinder diesel engine 3 speed PTO 3 speed gearbox with HI and LO Hydraulic steering comfortable spring seat ROPS and canopy
YT200 2WD GARDEN TRACTOR (new) $4250
20hp 2 cylinder diesel engine Single speed PTO 3 speed gearbox with HI and LO Hydraulic steering Rear wheel ballast
Fun to drive, easy start diesel. Will run small implements like tillers, finish mowers, slashers. Tow your trailer around your small property or nip down to the road to collect the mail or retrieve your wheelie bins etc. etc.
450g cartridge Gulf Western $11 BlackTak Molyplex grease
8.3-24 inner tube (JM204, 204S) $52
6.0-12 inner tube (JM204, 204S) $17.50
6.00–12 Jinma/Siromer front wheel
complete with tube & AG tyre $105
PTO shaft 1000mm closed length $90
1200mm closed length $99
Std. 35mm 6 spline each end to suit all medium duty implements on tractors to around 50hp
PTO shaft with safety clutch $190
Universal, suits most slashers and mowers
Siromer and Jinma oil filtersDiesel fuel/Engine oil/Hydraulic
all $12Suit 20hp, 25hp & 28hp tractors with
Laidong engine from 2006 on……..
AGTREK was established in 2007 to provide
Tasmanians with access to good value equipment for
hobby farms, landscaping and property maintenance.
Lifestyle machinery with low, fair price tags
50mm chrome towball 2.5t $6
50mm chrome towball 3.5t $8
Tractor spring seat. Comfortable padded seat with adjustable suspension $185
Turf tyres for JM204 (also fits JM254/284)
2 front wheels/2 rear wheels complete, minimise damage to grassed areas cased by the standard agricultural tyres $480 set
Heavy 3 point linkage arms for all Jinma JM204/254/284 tractors $94 pair
Post Hole Diggers are sold out but we still have augers
150mm auger $165
230mm auger $185
300mm auger $225
450mm auger $395
0.9m TM90 Slasher (3’ suits tractors to 20hp) $1150
4Prices JANUARY 2018
AGTREK was established in 2007 to provide
Tasmanians with access to good value equipment for
hobby farms, landscaping and property maintenance.
Lifestyle machinery with low, fair price tags
Hand Shear for steel Manual Steel shear Multi-purpose Shear
Three models:Maximum Capacities (mm)Steel Round 16 Steel Square 16 Steel Flat 100 x 10 Steel Angle 40 x 6 Steel plate 8 Steel T 40 x 6
Net Weight of unit 42kg
$199 incl. GST
PBS-8
Maximum Capacities (mm)
Steel Round 22 Steel Square 20 Steel Flat 90 x 14 Steel Angle 60 x 6 Steel plate 10 Steel T 60 x 6
Net Weight of unit 98kg
$395 incl. GST
PBS-7
Maximum Capacities (mm)Steel Round 22 Steel Square 20 Steel Flat 90 x 14 Steel Angle 60 x 6 Steel plate 10 Steel T 60 x 6
Net Weight of unit 130kg
Max punch material thickness 8mm Standard punch and die supplied is 16mm diameter
$495 incl. GST
PBS-9
PBS-9 combines PBS-7 and hole punching capacity
Handy units for the small workshop or hobby fabricator. Shears will need to be fastened to a floor - or to a steel base with some mass to it if you intend to move it about.
