PRIMARY • EXTRUSION • SECONDARY • FLAT … Corp. Kempe Engineering Metal 7 Inc. Directory of...

2014 MASTER DIRECTORY OF ALUMINUM EQUIPMENT SUPPLIERS

PRIMARY • EXTRUSION • SECONDARY • FLAT ROLLED

Casting Confidence

Built on innovation and refined through experience, Wagstaff billet and ingot casting technologies are a gateway to profitability. Casthouses around the world rely on the history, experience, and service offered by Wagstaff to foster confidence within the casting operation. That casting confidence is vital for success in high quality aerospace alloy casting for downstream rolling, extrusion, and forging.

The leader in Direct Chill Casting Technology

To find out how your operation can increase casting confidence Call +1 509 922 1404 | www.wagstaff.com

Al

› Casting Machines

› Rolling Ingot Casting Systems

› Billet Casting Systems

› Automation

› Aerospace Alloy Technologies

› Worldwide Service and Support

630mm AA 7075 ARC™ Aerospace Alloy Casting@ Aluminicaste Fundición de México, S. de R.L. de C.V.

Casting Confidence 08-14-2014 303x216 ARC ENG.indd 1 9/11/2014 10:42:23 AM

Castool Makes Extrusion Better

NEW

CANADA +1-905-852-0121

THAILAND +66-38-345188

www.castool.comFollow our blog at

www.castool.com/blog

CTS-LM Directory Ad 2.qxp_CTS.LMAHalfPageAD 2014-09-10 11:00 AM Page 1

2014 Master Directorya publication of

Copyright © 2014 by Fellom Publishing. All rights reserved.

COVER: Before billets are removed from the Wagstaff casting pit at Sapa’s Cresso-na, Pennsylvania facility, the chief caster stencils the cast order number onto the cast log. Sapa has made significant invest-ments to increase their casting capacity.

Advertiser IndexWagstaff ........................................................................... 2Castool ............................................................................. 3Castool ...........................................................................10Gautschi .........................................................................20SECO/Warwick .............................................................39GNA alutech ..................................................................40

Directories:

Index to Directory of Primary Aluminum Equipment Manufacturers & Suppliers ................. 4

Index to Directory of Aluminum Extrusion Equipment Manufacturers and Suppliers ........... 10

Index to Directory of Secondary Aluminum Equipment Manufacturers & Suppliers ............... 16

Index to Directory of Flat Rolled Aluminum Equipment Manufacturers and Suppliers ........... 20

Alphabetical List of Companies .......................... 25

LIGHT METAL AGE magazine is published bi-monthly by Fellom Publishing Co., 170 South Spruce Avenue, Suite 120, South San Francisco, CA 94080-4519. MAGAZINE SUBSCRIPTION RATES 2014, Hard Copy: 1 year U.S.—$56.00; 2 years—$68.00; 3 years—$80.00. Surface mail rates, 1 Year—$95.00; 2 years— $140.00; 3 years—$188.00. Airmail rates, 1 Year —$128.00; 2 years—$210.00; 3 years—$298.00. Digital: 1 year—$35.00. Back issues $12.00 each plus postage. Special single copy prices for large directory issues—$15.00 plus postage. In-dex—$2.00 per year.

email: [email protected] www.lightmetalage.comPhone: (650) 588-8832 FAX: (650) 588-0901

Light Metal Age is the pre-eminent magazine of the aluminum world, covering primary production and semi fabrication of the metal. Circulation is international and editorial coverage encompasses primary and secondary smelting; casting of billet, slab, and ingot; extrusion operations; and sheet and strip rolling; as well as associated metal processes, equipment, and technology.

LIGHT METAL AGE, 2014 MASTER DIRECTORY 3

LIGHT METAL AGE, 2014 MASTER DIRECTORY4

Index to Directory of Primary Aluminum Equipment Manufacturers & Suppliers

ANODE PLANTAnode Baking Furnaces ............................................ 5Anode Charging Machines ........................................ 5Anode Cooling Systems ............................................ 5Anode Measuring Instruments ................................... 5Anode Paste Mixers .................................................. 5Anode Plant Cleaning Systems ................................. 5Anode Saws .............................................................. 5Building Ventilation .................................................... 5Crushing Mills ............................................................ 5Gas Cleaning Systems .............................................. 5Hammer Mills ............................................................. 5Jaw Crushers ............................................................. 5Refractories ............................................................... 5Vibrating Compactors/ Forming Machines ................ 5 ANODE RODDING PLANTAnode Assembly Machines ....................................... 5Anode Cleaning Systems .......................................... 5Anode Rods ............................................................... 5Bath Material Removal Sys. ...................................... 5Building Ventilation .................................................... 5Butt Cleaning Machines ............................................. 5Butt Crushing Machines ............................................ 5Butt Stripping Machines ............................................. 5Cast Iron Pouring Stations ......................................... 5Cathode Sealing Systems ......................................... 5Induction Furnaces .................................................... 5Pollution Control Equipment ...................................... 6Rod Grinding Machines ............................................. 6Rod Straightening Machines ..................................... 6Shot Blasting Stations ............................................... 6Stub Coatings/Coating Units ..................................... 6Stub Cutting Machines .............................................. 6Stub Drying Units ....................................................... 6Stub Hole Boring Machines ....................................... 6Stub Protection Systems ........................................... 6Stub Straightening Machines ..................................... 6Stub Welding Machines ............................................. 6Thimble Removal Presses ......................................... 6

POTROOMAlumina Conveyors ................................................... 6Alumina Feeders ....................................................... 6Alumina Silos ............................................................. 6Anode Transporters ................................................... 6Bath Cleaning Machines ............................................ 6Briquette Placement Vehicles .................................... 6Building Ventilation .................................................... 6Bulk Material Carriers ................................................ 6Busbars and Flexibles ............................................... 6Cell Carbon Lining Materials ..................................... 6Crucible Cleaning Machines ...................................... 6Crust Breakers ........................................................... 6Hammer Breakers ..................................................... 6Metal Transfer Ladles ................................................ 6Pollution Control Equipment ...................................... 7Pot Cells .................................................................... 7Pot Ramming ............................................................. 7Pot Superstructures ................................................... 7Potline Insulation ....................................................... 7Potroom Cleaning Equipment .................................... 7Potroom Vehicles ...................................................... 7

Refractories ............................................................... 7Spading Machines ..................................................... 7Tapping Machines ..................................................... 7Vacuum Cleaners ...................................................... 7

CASTHOUSEAlloying Elements ...................................................... 7Building Ventilation .................................................... 7Casthouse Cranes ..................................................... 7Casthouse Lubricants ................................................ 7Chip Melters .............................................................. 7Combustion Equipment ............................................. 7Continuous Rod Casters ........................................... 7Continuous Sheet Casters ......................................... 7Continuous Thin Slab Casters ................................... 7DC Casting Machine Automation .............................. 7DC Casting Machines ................................................ 7Dross Cooling Equipment .......................................... 7Dross Removal Equipment ........................................ 7EMC Casting Equipment ........................................... 7Flux ............................................................................ 7Furnace Charging Machines ..................................... 7Furnaces – Homogenizing ......................................... 7Furnaces – Induction ................................................. 8Furnaces – Melting/Holding ....................................... 8Grain Refining Alloys ................................................. 8Grain Refining Rod Dispensers ................................. 8Graphite Machine Parts ............................................. 8Horizontal Casting Machines ..................................... 8Hydrogen Analyzers .................................................. 8Immersion Heaters .................................................... 8Industrial Gases ......................................................... 8Ingot Casting Machines ............................................. 8Ingot Handling Equipment ......................................... 8Ingot Stackers ............................................................ 8Launders and Troughs .............................................. 8Level Control Instrumentation .................................... 8Material Handling Equipment/Vehicles ...................... 8Metal Degassing Equipment/Supplies ....................... 8Metal Filtration Equipment ......................................... 8Metal Pretreatment Equipment .................................. 9Metal Skimming ......................................................... 9Mold Tooling – Billet, Slab, T-Ingot ............................ 9Molten Level Control .................................................. 9Molten Metal Analysis ................................................ 9Molten Metal Pumps .................................................. 9Pollution Control Equipment ...................................... 9Refractories/Coatings ................................................ 9Sawing Machines/Consumables ............................... 9Sow Casters .............................................................. 9Stirrers – Electromagnetic ......................................... 9Stirrers – Permanent Magnet .................................... 9Strapping/Packaging Equipment ............................... 9Temperature Measurement ....................................... 9Ultrasonic Testing ...................................................... 9

SMELTER SERVICESConsulting Engineers ................................................ 9Publications ............................................................... 9Technical Services .................................................... 9

USED EQUIPMENT(Primary Business) .................................................... 9

Directory of Primary Aluminum Equipment Manufacturers & SuppliersCategories/Companies

5LIGHT METAL AGE, 2014 MASTER DIRECTORY

ANODE PLANTAnode Baking Furnaces

BrochotCCPI Inc. – North AmericaColt International BVFurnace Engineering Pty. Ltd.Gouda RefractoriesInnovathermNederman LLCR&D Carbon Ltd. Refraco Riedhammer GmbH

Anode Charging MachinesBrochotBuss ChemTech AGECLGLAMA Maschinenbau GmbHOutotec (Canada) Ltd. TPS Infrastructure Ltd.

Anode Cooling SystemsBrochotBuss ChemTech AGColt International BVOutotec (Canada) Ltd. Fives Solios

Anode Measuring InstrumentsBuss ChemTech AGIMPEC ASOutotec (Canada) Ltd. R&D Carbon Ltd. STAS Inc.

Anode Paste MixersB&P Process Equipment and

Systems, LLCBuss ChemTech AGMaschinenfabrik Gustav Eirich

GmbH & Co. KGOutotec (Canada) Ltd. C.A. Picard International

Anode Plant Cleaning SystemsAdvanced Dynamics Corp. Ltd.BrochotBuss ChemTech AGIMPEC ASTechmo Car SpATPS Infrastructure Ltd.

Anode SawsBrochotECLIMPEC ASKempe EngineeringMecfor Inc. August Mössner GmbH + Co. KGOutotec (Canada) Ltd. T.T. Tomorrow Technology S.p.A.

Building VentilationColt International BVHencon

Crushing MillsBuss ChemTech AGIMPEC AS

Gas Cleaning SystemsBuss ChemTech AGInnovathermNederman LLC

Hammer MillsBuss ChemTech AGIMPEC AS

Jaw CrushersBuss ChemTech AGIMPEC ASKempe EngineeringMajor Furnace Australia Pty. Ltd.Fives SoliosVHE ehf

RefractoriesBrochotCalderysGouda RefractoriesPermatech Inc.Pyrotek, Inc.Refraco Scottish Chemical Industriessimonsen a/sSkamol A/SWahl Refractory Solutions, LLC

Vibrating Compactors/ Forming Machines

Buss ChemTech AGErie Press SystemsOutotec (Canada) Ltd. Fives Solios

ANODE RODDING PLANTAnode Assembly Machines

BrochotECLIMPEC ASKempe EngineeringOutotec (Canada) Ltd. VHE ehf

Anode Cleaning SystemsBrochotBuss ChemTech AGDaifuku WebbECLGLAMA Maschinenbau GmbHIMPEC ASKempe EngineeringOutotec (Canada) Ltd. Sermas IndustrieTechmo Car SpAT.T. Tomorrow Technology S.p.A.VHE ehf

Anode RodsGES Inc.HMR Group ASIMPEC ASInfa S.A. Kempe EngineeringPamas & CompanyThomas & Coffey LimitedVHE ehf

Bath Material Removal Sys.BrochotGLAMA Maschinenbau GmbHIMPEC ASKempe EngineeringMetal 7 Inc. Outotec (Canada) Ltd. VHE ehf


Butt Cleaning MachinesBrochotBuss ChemTech AGECLGLAMA Maschinenbau GmbHIMPEC ASKempe EngineeringOutotec (Canada) Ltd. Techmo Car SpAT.T. Tomorrow Technology S.p.A.VHE ehf

Butt Crushing MachinesBuss ChemTech AGECLIMPEC ASKempe EngineeringOutotec (Canada) Ltd. VHE ehf

Butt Stripping MachinesAcme Machine Works, Inc.BrochotECLIMPEC ASKempe EngineeringOutotec (Canada) Ltd. VHE ehf

Cast Iron Pouring StationsBrochotECLIMPEC ASKempe EngineeringMetal 7 Inc. Outotec (Canada) Ltd. Pyrotek, Inc.VHE ehf

Cathode Sealing SystemsBrochotGNA alutech inc.Metal 7 Inc. Outotec (Canada) Ltd. Pyrotek, Inc.Sermas IndustrieVHE ehf

Induction FurnacesCalderysECLFurnace Engineering Pty. Ltd.IMPEC ASInductotherm Corp. Kempe EngineeringMetal 7 Inc.


6 LIGHT METAL AGE, 2014 MASTER DIRECTORY

Pollution Control EquipmentInductotherm Corp. Nederman LLCFives SoliosTPS Infrastructure Ltd.

Rod Grinding MachinesBrochotECLIMPEC ASKempe EngineeringOutotec (Canada) Ltd. VHE ehf

Rod Straightening MachinesAcme Machine Works, Inc.Advanced Dynamics Corp. Ltd.BrochotECLIMPEC ASKempe EngineeringOutotec (Canada) Ltd. VHE ehf

Shot Blasting StationsBrochotECLIMPEC ASKempe EngineeringOutotec (Canada) Ltd. Techmo Car SpAVHE ehf

Stub Coatings/Coating UnitsBrochotIMPEC ASKempe EngineeringMetal 7 Inc. Outotec (Canada) Ltd. Pyrotek, Inc.VHE ehf

Stub Cutting MachinesBrochotHMR Group ASIMPEC ASKempe EngineeringOutotec (Canada) Ltd. VHE ehf

Stub Drying UnitsBrochotECLFurnace Engineering Pty. Ltd.IMPEC ASKempe EngineeringOutotec (Canada) Ltd. VHE ehf

Stub Hole Boring MachinesAcme Machine Works, Inc.IMPEC ASKempe EngineeringOutotec (Canada) Ltd. VHE ehf

Stub Protection SystemsIMPEC ASKempe EngineeringVHE ehf

Stub Straightening MachinesAcme Machine Works, Inc.BrochotIMPEC ASKempe EngineeringOutotec (Canada) Ltd. VHE ehf

Stub Welding MachinesBrochotHMR Group ASIMPEC ASKempe EngineeringOutotec (Canada) Ltd. Thomas & Coffey LimitedVHE ehf

Thimble Removal PressesAcme Machine Works, Inc.Advanced Dynamics Corp. Ltd.BrochotDaifuku WebbECLIMPEC ASKempe EngineeringOutotec (Canada) Ltd. VHE ehf

POTROOMAlumina Conveyors

Daifuku WebbIMPEC ASInfa S.A. Metal 7 Inc. VHE ehf

Alumina FeedersGLAMA Maschinenbau GmbHHencon HMR Group ASIMPEC ASInfa S.A. Kempe EngineeringMetal 7 Inc. Techmo Car SpAT.T. Tomorrow Technology S.p.A.

Alumina SilosDaifuku WebbIMPEC ASVHE ehf

Anode TransportersBrochotDaifuku WebbGLAMA Maschinenbau GmbHHencon HMR Group ASMecfor Inc. Techmo Car SpATPS Infrastructure Ltd. T.T. Tomorrow Technology S.p.A.

Bath Cleaning MachinesBrochotDaifuku WebbHencon IMPEC ASMecfor Inc. Metal 7 Inc. STAS Inc.

Techmo Car SpAVHE ehf

Briquette Placement VehiclesHencon Techmo Car SpA


Bulk Material CarriersAcme Machine Works, Inc.Mecfor Inc. TPS Infrastructure Ltd.

Busbars and FlexiblesIMPEC ASInfa S.A.

Cell Carbon Lining MaterialsGouda RefractoriesPamas & CompanySGL Carbon GmbHsimonsen a/s

Crucible Cleaning MachinesAcme Machine Works, Inc.BrochotHMR Group ASKempe EngineeringSTAS Inc.Techmo Car SpAT.T. Tomorrow Technology S.p.A.VHE ehf

Crust BreakersAcme Machine Works, Inc.BrochotECLGLAMA Maschinenbau GmbHHencon HMR Group ASIMPEC ASKempe EngineeringMecfor Inc. Techmo Car SpA

Hammer BreakersGLAMA Maschinenbau GmbHHencon HMR Group ASIMPEC ASKempe EngineeringTechmo Car SpA

Metal Transfer LadlesApogee Technology Inc. BrochotGillespie & Powers, Inc.GLAMA Maschinenbau GmbHHencon HMR Group ASInfa S.A. Mecfor Inc. Metal 7 Inc. Pyrotek, Inc.Techmo Car SpATPS Infrastructure Ltd. T.T. Tomorrow Technology S.p.A.Wahl Refractory Solutions, LLC



Pollution Control EquipmentColt International BVIMPEC ASNederman LLCFives SoliosTPS Infrastructure Ltd.

Pot CellsGouda RefractoriesHMR Group ASIMPEC ASInfa S.A. Pamas & CompanyVHE ehf

Pot RammingBrochotSTAS Inc.

Pot SuperstructuresIMPEC ASInfa S.A.

Potline InsulationBrochotThe Gund Company, Inc.simonsen a/sSkamol A/S

Potroom Cleaning EquipmentECLHencon STAS Inc.Techmo Car SpAVHE ehf

Potroom VehiclesAcme Machine Works, Inc.BrochotGLAMA Maschinenbau GmbHHencon HMR Group ASMecfor Inc. Techmo Car SpATPS Infrastructure Ltd.

RefractoriesCalderysGillespie & Powers, Inc.Gouda RefractoriesKabert Industries Inc.Pamas & CompanyPermatech Inc.Pyrotek, Inc.Refracosimonsen a/sSkamol A/SWahl Refractory Solutions, LLC

Spading MachinesAcme Machine Works, Inc.Hencon HMR Group AS

Tapping MachinesBrochotECLGLAMA Maschinenbau GmbHHencon HMR Group ASMecfor Inc. Techmo Car SpA

Vacuum CleanersHencon Techmo Car SpATPS Infrastructure Ltd.

CASTHOUSEAlloying Elements

ABBBelmont Metals Inc.Excellent Foundry Fluxes CompanyPyrotek, Inc.Scottish Chemical Industries


Casthouse CranesAdvanced Dynamics Corp. Ltd.BrochotInfa S.A.

Casthouse LubricantsAlmex USA, Inc. AMCOL CorporationDry-Lube Pyrotek, Inc.Scottish Chemical IndustriesZIRCAR Ceramics, Inc.

Chip MeltersGNA alutech inc.Inductotherm Corp. Zmag America, Ltd.

Combustion EquipmentACI-CanefcoAir Liquide Air Products and Chemicals, Inc.Almex USA, Inc. Bloom Engineering Gautschi Engineering GmbHGillespie & Powers, Inc.HCT Ltd. InnovathermMajor Furnace Australia Pty. Ltd.Mechatherm International Ltd.Metal 7 Inc. mfs engineering ltd.Thorpe Technologies Inc.VHE ehf

Continuous Rod CastersACI-CanefcoContinuus-Properzi S.P.A.Properzi International, Inc.

Continuous Sheet CastersCastal EngineeringHazelett Strip-Casting Novelis PAEBruno Presezzi SpA

Continuous Thin Slab CastersHazelett Strip-Casting Novelis PAE

DC Casting Machine AutomationAlmex USA, Inc. Gautschi Engineering GmbHMechatherm International Ltd.

Novelis PAERemelt Technologies, Inc.STAS Inc.Wagstaff, Inc.

DC Casting MachinesAlmex USA, Inc. Gautschi Engineering GmbHHertwich EngineeringMechatherm International Ltd.mfs engineering ltd.Novelis PAEo.d.t. Engineering Pty. Ltd.Remelt Technologies, Inc.Wagstaff, Inc.

Dross Cooling EquipmentAltek LLCBrochotmfs engineering ltd.Pyrotek, Inc.Sanshin Sanwa GroupSTAS Inc.

Dross Removal EquipmentAltek LLCBrochotGLAMA Maschinenbau GmbHHenconHMR Group ASMecfor Inc. Metal 7 Inc. mfs engineering ltd.Sanshin Sanwa GroupWorswick Engineering Ltd.

EMC Casting EquipmentABB Inc., Metallurgy ProductsPyrotek, Inc.

FluxABBBelmont Metals Inc.Excellent Foundry Fluxes CompanyPyrotek, Inc.Scottish Chemical Industries

Furnace Charging MachinesACI-CanefcoAdvanced Dynamics Corp. Ltd.BrochotFurnace Engineering Pty. Ltd.Gautschi Engineering GmbHGLAMA Maschinenbau GmbHGNA alutech inc.Hencon Hertwich EngineeringHMR Group ASInductotherm Corp. Mecfor Inc. Mechatherm International Ltd.mfs engineering ltd.Techmo Car SpAThorpe Technologies Inc.TPS Infrastructure Ltd. T.T. Tomorrow Technology S.p.A.

Furnaces – HomogenizingACI-CanefcoAlmex USA, Inc. Ebner Furnaces, Inc.



EFRFurnace Engineering Pty. Ltd.Gautschi Engineering GmbHGillespie & Powers, Inc.GNA alutech inc.Hertwich EngineeringLOI Thermprocess GmbHMecfor Inc. Mechatherm International Ltd.Metal 7 Inc. mfs engineering ltd.Remelt Technologies, Inc.SECO/Warwick Corp. Fives SoliosSTAS Inc.Surface Combustion, Inc.Thorpe Technologies Inc.

Furnaces – InductionAlmex USA, Inc. Furnace Engineering Pty. Ltd.Inductotherm Corp. Marx GmbH & Co. KGRefraco

Furnaces – Melting/HoldingACI-CanefcoAlmex USA, Inc. Apogee Technology Inc. Castal EngineeringContinuus-Properzi S.P.A.EFRFurnace Engineering Pty. Ltd.Gautschi Engineering GmbHGillespie & Powers, Inc.GNA alutech inc.Hertwich EngineeringInductotherm Corp. Infa S.A. LOI Thermprocess GmbHMajor Furnace Australia Pty. Ltd.Marx GmbH & Co. KGMecfor Inc. Mechatherm International Ltd.mfs engineering ltd.Properzi International, Inc.Pyrotek, Inc.RefracoThe Schaefer Group, Inc.SECO/Warwick Corp. Fives SoliosSurface Combustion, Inc.Thorpe Technologies Inc.VHE ehf

Grain Refining AlloysABBAlmex USA, Inc. Belmont Metals Inc.Pyrotek, Inc.Scottish Chemical Industries

Grain Refining Rod DispensersAcme Machine Works, Inc.Almex USA, Inc. AMG AluminumApogee Technology Inc. Gautschi Engineering GmbHInfa S.A. Novelis PAEo.d.t. Engineering Pty. Ltd.Scottish Chemical Industries

Graphite Machine PartsApogee Technology Inc. GES Inc.Mersen USA Greenville-MI Corp.Molten Metal Equipment InnovationsNovelis PAEPermatech Inc.Pyrotek, Inc.Scottish Chemical IndustriesSTAS Inc.ZIRCAR Ceramics, Inc.

Horizontal Casting MachinesACI-CanefcoAlmex USA, Inc. Gautschi Engineering GmbHHertwich EngineeringNovelis PAEWorswick Engineering Ltd.

Hydrogen AnalyzersABBMetal 7 Inc. Pyrotek, Inc.Scottish Chemical Industries

Immersion HeatersApogee Technology Inc. Atherm SASMolten Metal Equipment InnovationsThe Schaefer Group, Inc.

Industrial GasesAir Liquide Air Products and Chemicals, Inc.

Ingot Casting MachinesACI-CanefcoAlmex USA, Inc. BrochotContinuus-Properzi S.P.A.Gautschi Engineering GmbHHertwich Engineeringmfs engineering ltd.o.d.t. Engineering Pty. Ltd.Outotec (Canada) Ltd. Properzi International, Inc.Wagstaff, Inc.Worswick Engineering Ltd.

Ingot Handling EquipmentACI-CanefcoAcme Machine Works, Inc.Advanced Machine & EngineeringBrochotContinuus-Properzi S.P.A.Ebner Furnaces, Inc.Gautschi Engineering GmbHHertwich EngineeringMecfor Inc. Outotec (Canada) Ltd. Properzi International, Inc.Worswick Engineering Ltd.

Ingot StackersAcme Machine Works, Inc.Advanced Machine & EngineeringBrochotContinuus-Properzi S.P.A.Gautschi Engineering GmbHHertwich Engineering

Mecfor Inc. Metal 7 Inc. mfs engineering ltd.o.d.t. Engineering Pty. Ltd.Outotec (Canada) Ltd. Properzi International, Inc.Worswick Engineering Ltd.

Launders and TroughsACI-CanefcoApogee Technology Inc. BrochotFurnace Engineering Pty. Ltd.Gillespie & Powers, Inc.Infa S.A. Mechatherm International Ltd.o.d.t. Engineering Pty. Ltd.Outotec (Canada) Ltd. Pyrotek, Inc.RefracoScottish Chemical IndustriesSTAS Inc.Wagstaff, Inc.Wahl Refractory Solutions, LLC

Level Control InstrumentationBrochotCCPI Inc. – North AmericaFurnace Engineering Pty. Ltd.Gillespie & Powers, Inc.Novelis PAEPrecimeter Control ABSentech Precimeter Inc. STAS Inc.

Material Handling Equipment/Vehicles

ABBAdvanced Dynamics Corp. Ltd.Bradley Lifting Corp.BrochotDaifuku WebbGLAMA Maschinenbau GmbHHencon Hertwich EngineeringMecfor Inc. Outotec (Canada) Ltd. Techmo Car SpATPS Infrastructure Ltd. T.T. Tomorrow Technology S.p.A.

Metal Degassing Equipment/Supplies

ABBAlmex USA, Inc. Apogee Technology Inc. Belmont Metals Inc.Continuus-Properzi S.P.A.Excellent Foundry Fluxes CompanyMetal 7 Inc. Molten Metal Equipment InnovationsNovelis PAEPermatech Inc.Properzi International, Inc.Pyrotek, Inc.Scottish Chemical IndustriesSTAS Inc.

Metal Filtration EquipmentAlmex USA, Inc. Apogee Technology Inc. Castal Engineering



Infa S.A. Kabert Industries Inc.Permatech Inc.Properzi International, Inc.Pyrotek, Inc.The Schaefer Group, Inc.Scottish Chemical IndustriesSELEE CorporationSTAS Inc.Urja Products Pvt Ltd.

Metal Pretreatment EquipmentAlmex USA, Inc. STAS Inc.VHE ehf

Metal SkimmingACI-CanefcoAdvanced Dynamics Corp. Ltd.BrochotGLAMA Maschinenbau GmbHHencon HMR Group ASMecfor Inc. Metal 7 Inc. Outotec (Canada) Ltd. Permatech Inc.Pyrotek, Inc.STAS Inc.Techmo Car SpATPS Infrastructure Ltd. T.T. Tomorrow Technology S.p.A.VHE ehf Wahl Refractory Solutions, LLC Worswick Engineering Ltd.

Mold Tooling – Billet, Slab, T-Ingot

Almex USA, Inc. Mechatherm International Ltd.Novelis PAEo.d.t. Engineering Pty. Ltd.Pyrotek, Inc.Wagstaff, Inc.

Molten Level ControlAlmex USA, Inc. Apogee Technology Inc. BrochotCCPI Inc. – North AmericaGillespie & Powers, Inc.Infa S.A. Mechatherm International Ltd.Molten Metal Equipment InnovationsOutotec (Canada) Ltd. Precimeter Control ABSentech Precimeter Inc. STAS Inc.Wagstaff, Inc.

Molten Metal AnalysisABBAlmex USA, Inc. Apogee Technology Inc. Pyrotek, Inc.Scottish Chemical Industries

Molten Metal PumpsABB Inc., Metallurgy ProductsAlmex USA, Inc. Apogee Technology Inc. BrochotMarx GmbH & Co. KG

Molten Metal Equipment InnovationsPermatech Inc.Precimeter Control ABPyrotek, Inc.Zmag America, Ltd.

Pollution Control EquipmentInductotherm Corp. Nederman LLCTPS Infrastructure Ltd.

Refractories/CoatingsACI-CanefcoApogee Technology Inc. BrochotCalderysCCPI Inc. – North AmericaGouda RefractoriesKabert Industries Inc.Metal 7 Inc. Novelis PAEPermatech Inc.Pyrotek, Inc.RefracoThe Schaefer Group, Inc.Scottish Chemical IndustriesWahl Refractory Solutions, LLC ZIRCAR Ceramics, Inc.ZYP Coatings, Inc.

Sawing Machines/ConsumablesACI-CanefcoAcme Machine Works, Inc.Advanced Dynamics Corp. Ltd.Advanced Machine & Engineering Hertwich EngineeringAugust Mössner GmbH + Co. KGPyrotek, Inc.Sermas Industrie

Sow CastersAcme Machine Works, Inc.Advanced Dynamics Corp. Ltd.BrochotGillespie & Powers, Inc.o.d.t. Engineering Pty. Ltd.Outotec (Canada) Ltd. Pyrotek, Inc.Worswick Engineering Ltd.

Stirrers – ElectromagneticABB Inc., Metallurgy ProductsAltek LLCHertwich EngineeringPyrotek, Inc.Fives Solios

Stirrers – Permanent MagnetZmag America, Ltd.

Strapping/Packaging Equipment

ACI-CanefcoAdvanced Dynamics Corp. Ltd.BrochotHertwich Engineeringo.d.t. Engineering Pty. Ltd.Outotec (Canada) Ltd.

Temperature MeasurementAccurate Sensors Technologies Ltd.CCPI Inc. – North America

InnovathermMetal 7 Inc. RefracoScottish Chemical IndustriesSTAS Inc.VHE ehf Williamson Corp.

Ultrasonic TestingACI-CanefcoAdvanced Dynamics Corp. Ltd.Almex USA, Inc. Hertwich Engineering

SMELTER SERVICESConsulting Engineers

Altek LLCAluminium Consulting Engineers, LLCBrochotBuss ChemTech AGColt International BVECLFATA Hunter, Div. of FATA SPAGillespie & Powers, Inc.Gouda RefractoriesHatchHencon IMPEC ASIndustrial Maintenance Group BVKempe EngineeringMecfor Inc. Penta Engineering, P.A.R&D Carbon Ltd.Refraco Rusal VAMI JSCWorleyParsons

PublicationsThe Aluminum AssociationBeuth Verlag GmbHTMS (The Minerals, Metals &

Materials Society)

Technical ServicesAdvanced Dynamics Corp. Ltd.Aluminium Consulting Engineers, LLCBrochotBuss ChemTech AGECLFATA Hunter, Div. of FATA SPAGillespie & Powers, Inc.HatchIMPEC ASIndustrial Maintenance Group BVInfa S.A. Mecfor Inc. Outotec (Canada) Ltd. Pyrotek, Inc.R&D Carbon Ltd. Refracosimonsen a/sSTAS Inc.Rusal VAMI JSCWorleyParsons

USED EQUIPMENT (Primary Business)

Machinery International Corp.Phipps Company


Index to Directory of Aluminum Extrusion Equipment Manufacturers and Suppliers

Aging Ovens ............................................................ 11Aluminum Contact Refractory Parts ........................ 11Anodizing Chemicals ............................................... 11Anodizing Systems .................................................. 11Automated Handling Systems ................................. 11Automatic Profile Measurement .............................. 11Belts ......................................................................... 11Billet Casting Equipment ......................................... 11Billet Suppliers ......................................................... 11CNC Fabrication Centers ........................................ 11Combustion Equipment ........................................... 11Compactors/Balers .................................................. 11Computer Systems/Software ................................... 11Conform Equipment ................................................. 11Consultants (Primary Business) .............................. 11Container Heating Systems ..................................... 11CVD Coated Dies .................................................... 11DC Power Supplies ................................................. 11Deburring Equipment ............................................... 12Degassing ............................................................... 12Die Cleaning Equipment .......................................... 12Die Design ............................................................... 12Die Ovens/Die Preheat Furnaces ............................ 12Die Polishing Equipment ......................................... 12Die Storage Systems ............................................... 12Dies ......................................................................... 12Dross Treatment/Removal ....................................... 12Furnaces – Billet Heating ........................................ 12Furnaces – Burners ................................................. 12Furnaces – Heat Treating ........................................ 12Furnaces – Melting .................................................. 13Gas Suppliers/Systems ........................................... 13Grain Refining Rod Dispensers ............................... 13Graphite Machining Parts ........................................ 13Handling Systems & Materials ................................. 13Hydraulic Systems ................................................... 13Hydrogen Analyzers ................................................ 13

Inclusion Measurement Systems ............................. 13Lubricants/Lubrication Equipment ........................... 13Maintenance ............................................................ 13Master Alloys/Grain Refining ................................... 13Material Handling Equipment/Vehicles .................... 13Metal Filters/Filtration Systems ............................... 13Metal Pumps ............................................................ 13Nitriding Equipment ................................................. 13Packing Lines/Packaging ........................................ 13Paint & Finishing Systems ....................................... 14PLCs ........................................................................ 14Pollution Control Systems ....................................... 14Press Loading Equipment ....................................... 14Press Revamps/Replacement Parts ........................ 14Presses .................................................................... 14Process Control & Automation Systems .................. 14Profile Finishing Equipment ..................................... 14Publications (Extrusion) ........................................... 14Pullers ...................................................................... 14Quality Control Test Equipment ............................... 14Quenching Systems ................................................ 14Racks/Stackers/Destackers ..................................... 14Refractories ............................................................. 14Rotary Extrusion Systems ....................................... 15Runout Rollers ......................................................... 15Saws/Saw Consumables ......................................... 15Shears ..................................................................... 15Stirrers ..................................................................... 15Straighteners ........................................................... 15Stretchers ................................................................ 15Table Coolers/Fans ................................................. 15Temperature Measurement Systems (Noncontact) .. 15Thermal Break Equipment ....................................... 15Tool Handling Equipment ........................................ 15Tool Steels ............................................................... 15Tooling ..................................................................... 15Used Equipment/ Equipment Agents (Primary Business)... 15

Castool Makes Extrusion Better

NEW

CANADA +1-905-852-0121

THAILAND +66-38-345188

www.castool.comFollow our blog at

www.castool.com/blog

CTS-LM Directory Ad 1.qxp_CTS.LMAHalfPageAD 2014-09-10 11:02 AM Page 1


Directory of Aluminum Extrusion Equipment Manufacturers and SuppliersCategories/Companies

AGING OVENSACI-CanefcoBelco Industries, Inc.COIM srlConsolidated Engineering CompanyEbner Furnaces, Inc.Ebner IndustrieofenbauFurnace Engineering Pty. Ltd.Gerref Industries Inc.GIA Clecim GNA alutech inc.Granco Clark Inc.LOI Thermprocess GmbHmfs engineering ltd.OMAV S.p.A.Sistem Teknik Ltd. STI.Stelter & Brinck Ltd. Sunwoo EngineeringTecalex USATellkamp Systems, Inc.Turla S.r.l.

ALUMINUM CONTACT REFRACTORY PARTS

Apogee Technology, Inc. COIM srlGES – Graphite Electrode Sales Co. Major FurnaceMurlin Chemcial Inc.Permatech Inc.Pyrotek Inc.Wahl Refractory Solutions, LLCZIRCAR Ceramics, Inc.Zircar Refractory Composites, Inc.

ANODIZING CHEMICALSItaltecno SRLReliant Aluminum Products, LLC

ANODIZING SYSTEMSAnodizing Technologies Inc. GIA Clecim Gramm Tecknik GmbHItaltecno SRLN.T.K. Plants Management &

Trading Ltd.OKD Okad Dee Co. Ltd. Walgren Co.

AUTOMATED HANDLING SYSTEMS

Advanced Dynamics Belco Industries, Inc.R.L. Best CompanyCastool Tooling SystemsConfex Technology Ltd.Consolidated Engineering CompanyDaifuku WebbEmmebi SRLExtral TechnologyFriggi N.A. Inc. Furnace Engineering Pty. Ltd.GIA Clecim Granco Clark Inc.Otto Junker GmbH Kredit Automation & ControlsOMAV S.p.A.OMS Impianti SRLPA – Profile AutomationSiddharth IndustriesSunwoo Engineering

TecalexTurla S.r.l. Walgren Co.

AUTOMATIC PROFILE MEASUREMENT

iNOEX LLCPA – Profile AutomationRomidot Ltd.

BELTSAlbarrie Canada LimitedR.L. Best CompanyCastool Tooling SystemsGIA Clecim Granco Clark Inc.Ichikawa North America Marathon Belting Ltd. Northern InnovationsOMAV S.p.AProtrans, LLC

BILLET CASTING EQUIPMENTABB Inc., Metallurgy ProductsACI-CanefcoAlmex USA Inc. Bonnell AluminumA. Cesana Co.COIM srlConfex Technology Ltd.Furnace Engineering Pty. Ltd.Gautschi Engineering GmbHHertwich Engineering GmbHHPI GmbHLOI Thermprocess GmbHmfs engineering ltd.Novelis PAEo.d.t. Engineering Pty Ltd.Permatech Inc.Remelt Technologies, Inc. Sistem Teknik Ltd. STI.Wagstaff, Inc.

BILLET SUPPLIERS Alexin LLCAlmex USA Inc. Aluminicaste FundiciónDubai Aluminum (DUBAL)Emirates Aluminium (EMAL)Hindalco Almex Aerospace Ltd. HydroTandem Industries - Div. of TST Inc.

CNC FABRICATION CENTERSFomUSAHandtmann CNC Technologies, Inc. Permatech Inc.ZIRCAR Ceramics, Inc.

COMBUSTION EQUIPMENTAdwest Technologies, Inc., CECO

EnvironmentalAir Liquide Industrial U.S. LPAir Products and Chemicals, Inc.Bloom Engineering COIM srlConsolidated Engineering CompanyEbner Furnaces, Inc.Ebner IndustrieofenbauFives North America CombustionFurnace Engineering Pty. Ltd.

Gautschi Engineering GmbHHauck Manufacturing Co.HCT Ltd. Otto Junker GmbH Major Furnace Australia Pty Ltd.mfs engineering ltd.Remelt Technologies, Inc. Sistem Teknik Ltd. STI.Stelter & Brinck Ltd. Thorpe Technologies Inc.Turla S.r.l.

COMPACTORS/BALERS COIM srlConfex Technology Ltd.Dry-Lube Intl. Inc. PA – Profile AutomationTecalex

COMPUTER SYSTEMS/SOFTWARE

Alumat & Almax MoriCastool Tooling SystemsFoy Inc.Granco Clark Inc.iNOEX LLCKRAHE InfoSystems, Inc.Kredit Automation & ControlsTurla S.r.l. Walgren Co.

CONFORM EQUIPMENT Confex Technology Ltd.Vapormatt Ltd.

CONSULTANTS (PRIMARY BUSINESS)

AlkenAluminum Casting Technologies

(ACT) LLCBadia & Associates LLCBöhler-UddeholmConsulting CollaborativeEMV Technology LLCRoy HollisKennedy Eurotech Inc.Penta Engineering, P.A. QED Extrusion Developments Inc.Quality Consultants VOFViking MetallurgicalWerner Extrusion Solutions, LLC

CONTAINER HEATING SYSTEMS

Castool Tooling SystemsMarx GmbH & Co. KGMarx LLCSoutheastern Extrusion & Tool, Inc.Tecalex USAThumb Tool & Engineering

CVD COATED DIESConfex Technology Ltd.VIP Tooling, Inc.Wefa Cedar Inc.

DC POWER SUPPLIES Italtecno SRLWalgren Co.



DEBURRING EQUIPMENT Abtex Corporation

DEGASSING Almex USA Inc. Apogee Technology, Inc. A. Cesana Co.COIM srlExcellent Foundry Fluxes CompanyFurnace Engineering Pty. Ltd.GES – Graphite Electrode Sales Co. Molten Metal Equipment InnovationsNovelis PAEPermatech Inc.Pyrotek Inc.Scottish Chemical IndustriesSistem Teknik Ltd. STI.STAS Inc.

DIE CLEANING EQUIPMENT Alumat & Almax MoriBelco Industries, Inc.CJI Systems Inc. C.M. Surface Treatment S.p.A.Compes S.P.A.Confex Technology Ltd.Die Cleaning Equipment and

Supply Inc.Gerref Industries Inc.Gramm Tecknik GmbHGuyson CorporationItaltecno SRLOMAV S.p.A.Scottish Chemical IndustriesVapormatt Ltd.

DIE DESIGN Alumat & Almax MoriCentral Extrusion Die CompanyCompes InternationalCompes S.P.A.Confex Technology Ltd.DienamexDie-Tech Inc.Elite Extrusion Die Ltd.ETS – Exco Canada, Colombia,

Michigan, and TexasMid-South Extrusion Die CompanySoutheastern Extrusion & Tool, Inc.Thumb Tool & Engineering Wefa Cedar Inc.

DIE OVENS/DIE PREHEAT FURNACES

ACI-CanefcoBelco Industries, Inc.Castool Tooling SystemsCNPTCOIM srlCompes S.P.A.Confex Technology Ltd.Consolidated Engineering CompanyFurnace Engineering Pty. Ltd.Gerref Industries Inc.GIA Clecim Granco Clark Inc.Marx GmbH & Co. KGMarx LLCNitrex Metal GmbHNitrex Metal Inc.Northern Innovations

Novatec Process Systems Inc.OMAV S.p.A.OMS Impianti SRLSistem Teknik Ltd. STI.Sunwoo Engineering Co., Ltd. Tecalex USAThermika SystemsThorpe Technologies Inc.Turla S.r.l.

DIE POLISHING EQUIPMENT Alumat & Almax MoriCJI Systems Inc. Compes S.P.A.Confex Technology Ltd.Die Cleaning Equipment and

Supply Inc.Thumb Tool & Engineering Vapormatt Ltd.

DIE STORAGE SYSTEMS Belco Industries, Inc.Castool Tooling SystemsConfex Technology Ltd.Die Cleaning Equipment and

Supply Inc.PA – Profile AutomationTurla S.r.l.

DIES Adex B.V.Alumat & Almax MoriBC SalvageCentral Extrusion Die CompanyCompes InternationalCompes S.P.A.Confex Technology Ltd.DienamexDie-Tech Inc.Elite Extrusion Die Ltd.ETS – Exco Canada, Colombia,

Michigan, and TexasGIA Clecim Mid-South Extrusion Die CompanySoutheastern Extrusion & Tool, Inc.Thumb Tool & Engineering Ultra-Sonic Extrusion Dies Inc. VIP Tooling, Inc.Youngstown Tool & Die Co. Inc.

DROSS TREATMENT/REMOVAL Altek, LLCA. Cesana Co.Furnace Engineering Pty. Ltd.Major Furnace Australia Pty Ltd.Mechatherm International Limitedmfs engineering ltd.Pyrotek Inc.Sanshin Sanwa GroupSTAS Inc. T.T. Tomorrow Technology S.p.A.

FURNACES – BILLET HEATING ACI-CanefcoBelco Industries, Inc.CNPTCOIM srlConfex Technology Ltd.Consolidated Engineering CompanyEbner Furnaces, Inc.Ebner Industrieofenbau

Extral TechnologyFurnace Engineering Pty. Ltd.GIA Clecim Granco Clark Inc.I.A.S. GmbHOtto Junker GmbH Marx GmbH & Co. KGMarx LLCmfs engineering ltd.OKD Okad Dee Co. Ltd. OMAV S.p.A.SECO/Warwick Corp.Sistem Teknik Ltd. STI.Sunwoo Engineering Co., Ltd. SMS Meer Inc.Tecalex USAThorpe Technologies Inc.Turla S.r.l. Wahl Refractory Solutions, LLC

FURNACES – BURNERS Air Products and Chemicals, Inc.COIM srlEbner Furnaces, Inc.Ebner IndustrieofenbauFurnace Engineering Pty. Ltd.Gautschi Engineering GmbHHauck Manufacturing Co.HCT Ltd. mfs engineering ltd.Otto Junker GmbH Sistem Teknik Ltd. STI.Stelter & Brinck Ltd. Thorpe Technologies Inc.Wahl Refractory Solutions, LLC

FURNACES – HEAT TREATING ACI-CanefcoAlmex USA Inc. Belco Industries, Inc.CNPTCOIM srlConsolidated Engineering CompanyDanieli CorporationEbner Furnaces, Inc.Ebner IndustrieofenbauEFRFurnace Engineering Pty. Ltd.Gautschi Engineering GmbHGIA Clecim GNA alutech inc.Granco Clark Inc.Hertwich Engineering GmbHOtto Junker GmbH LOI Thermprocess GmbHMechatherm International Limitedmfs engineering ltd.Nitrex Metal GmbHNitrex Metal Inc.Novatec Process Systems Inc.OMAV S.p.A.Remelt Technologies, Inc. SECO/Warwick Corp.Sistem Teknik Ltd. STI.Stelter & Brinck Ltd. Tecalex USAThorpe Technologies Inc.Wahl Refractory Solutions, LLC



FURNACE – MELTING ACI-CanefcoAir Liquide Industrial U.S. LPAlmex USA Inc. Apogee Technology, Inc. CNPTCOIM srlEFRFurnace Engineering Pty. Ltd.Gautschi Engineering GmbHGNA alutech inc.Hertwich Engineering GmbHIAS GmbHInductotherm Corp.Otto Junker GmbH LOI Thermprocess GmbHMajor Furnace Australia Pty Ltd.Marx GmbH & Co. KGMarx LLCMechatherm International Limitedmfs engineering ltd.OMAV S.p.A.Permatech Inc.SECO/Warwick Corp.Sistem Teknik Ltd. STI.Stelter & Brinck Ltd. Thorpe Technologies Inc.Wahl Refractory Solutions, LLC

GAS SUPPLIERS/SYSTEMS Air Products and Chemicals, Inc.COIM srlScottish Chemical Industries

GRAIN REFINING ROD DISPENSERS

Acme Machine Works, Inc.Almex USA Inc. AMG Aluminum Apogee Technology, Inc. A. Cesana Co.o.d.t. Engineering Pty Ltd.Pyrotek Inc.Scottish Chemical Industries

GRAPHITE MACHINING PARTS Apogee Technology, Inc. A. Cesana Co.GES – Graphite Electrode Sales Co. Mersen USAMolten Metal Equipment InnovationsNovelis PAEScottish Chemical IndustriesSistem Teknik Ltd. STI.Zircar Refractory Composites, Inc.

HANDLING SYSTEMS & MATERIALS

Advanced Dynamics Albarrie Canada LimitedBelco Industries, Inc.R.L. Best CompanyBMP AmericaCastool Tooling SystemsConsolidated Engineering CompanyCunningham Machine DesignDaifuku WebbDunaway Inc.Emmebi SRLExtral TechnologyFurnace Engineering Pty. Ltd.GIA Clecim

Granco Clark Inc.Marathon Belting Ltd. OKD Okad Dee Co. Ltd. OMAV S.p.A.PA – Profile AutomationPermatech Inc.Protrans, LLCShin Jye Industrial Co. Ltd. Siddharth IndustriesSistem Teknik Ltd. STI.Tecalex USAT.T. Tomorrow Technology S.p.A.Turla S.r.l.

HYDRAULIC SYSTEMS R.L. Best CompanyBosch Rexroth CorporationConfex Technology Ltd.Cunningham Machine DesignDunaway Inc.Major Furnace Australia Pty Ltd.mfs engineering ltd.The Oilgear CompanyPresezzi Extrusion NAPresezzi Extrusion SpAR&M FluidpowerSMS Meer Inc.Sunwoo Engineering Co., Ltd.

HYDROGEN ANALYZERS Air Liquide Industrial U.S. LPAlmex USA Inc. Scottish Chemical Industries

INCLUSION MEASUREMENT SYSTEMS

Almex USA Inc. Scottish Chemical Industries

LUBRICANTS/LUBRICATION EQUIPMENT

Amcol CorporationCastool Tooling SystemsA. Cesana Co.Confex Technology Ltd.Dry-Lube Intl. Inc. General MagnaplateMajor Furnace Australia Pty Ltd.Northern InnovationsNovelis PAEPresezzi Extrusion NAPresezzi Extrusion SpAPyrotek Inc.Scottish Chemical IndustriesSunbelt LubricantsTecalex USAZircar Refractory Composites, Inc.

MAINTENANCE Advanced Dynamics Amega IndustriesConfex Technology Ltd.Cunningham Machine DesignDunaway Inc.Italtecno SRLKredit Automation & ControlsLake Park Tool & Machine Inc. Major Furnace Australia Pty Ltd.Novatec Process Systems Inc.Permatech Inc.SMS Meer Inc.

Stelter & Brinck Ltd. Tecalex USATurla S.r.l. Wahl Refractory Solutions, LLC

MASTER ALLOYS/ GRAIN REFINING

Almex USA Inc. AMG Aluminum Apogee Technology, Inc. A. Cesana Co.Confex Technology Ltd.Excellent Foundry Fluxes CompanyPyrotek Inc.Scottish Chemical Industries

MATERIAL HANDLING EQUIPMENT/VEHICLES

Advanced Dynamics Bradley Lifting Corp.Combilift USADaifuku Webbmfs engineering ltd.o.d.t. Engineering Pty Ltd.PA – Profile Automation

METAL FILTERS/FILTRATION SYSTEMS

Apogee Technology, Inc. Confex Technology Ltd.Mikropul/NedermanNovelis PAEo.d.t. Engineering Pty Ltd.Permatech Inc.Presezzi Extrusion NAPresezzi Extrusion SpAPyrotek Inc.STAS Inc. Urja Products Pvt. Ltd. Zircar Refractory Composites, Inc.

METAL PUMPS ABB Inc., Metallurgy ProductsApogee Technology, Inc. Confex Technology Ltd.GES – Graphite Electrode Sales Co. Hertwich Engineering GmbHMolten Metal Equipment InnovationsPresezzi Extrusion NAPresezzi Extrusion SpAPyrotek Inc.Zmag America, Ltd.

NITRIDING EQUIPMENT Alumat & Almax MoriConsolidated Engineering CompanyFurnace Engineering Pty. Ltd.Nitrex Metal GmbHNitrex Metal Inc.Sistem Teknik Ltd. STI.Tecalex USA

PACKING LINES/PACKAGING ACI-CanefcoAdvanced Dynamics Belco Industries, Inc.Emmebi SRLN.T.K. Plants Management &

Trading Ltd.PA – Profile AutomationREISCH Maschinenbau GmbH



PAINT & FINISHING SYSTEMS Belco Industries, Inc.C.M. Surface Treatment S.p.A.Consolidated Engineering CompanyEmmebi SRLGerref Industries Inc.GIA Clecim Italtecno SRLNordson CorporationN.T.K. Plants Management &

Trading Ltd.PPG Industries, Inc. Tellkamp Systems, Inc.Trasmetal S.p.A.Walgren Co.

PLCsAdvanced Dynamics Castool Tooling SystemsItaltecno SRLOtto Junker GmbH Kredit Automation & ControlsNovatec Process Systems Inc.Novelis PAEPMC Systems LimitedSMS Meer Inc. STAS Inc. Stelter & Brinck Ltd. Thorpe Technologies Inc.Tecalex USATurla SrlWalgren Co.

POLLUTION CONTROL SYSTEMS

Adwest Technologies, Inc., CECO Environmental

Furnace Engineering Pty. Ltd.Italtecno SRLMajor Furnace Australia Pty Ltd.Mikropul/NedermanNitrex Metal GmbHNitrex Metal Inc.Sanshin Sanwa GroupStelter & Brinck Ltd. Tellkamp Systems, Inc.

PRESS LOADING EQUIPMENT Acme Machine Works, Inc.Belco Industries, Inc. Cunningham Machine DesignDanieli CorporationGIA Clecim Otto Junker GmbH Lake Park Tool & Machine Inc. The Oilgear CompanyPresezzi Extrusion NAPresezzi Extrusion SpAShin Jye Industrial Co. Ltd. Sistem Teknik Ltd. STI.Sunwoo Engineering Co., Ltd. TecalexTurla S.r.l. UBE Machinery Inc.

PRESS REVAMPS/ REPLACEMENT PARTS

Amega IndustriesR.L. Best CompanyButech BlissCastool Tooling Systems

Cunningham Machine DesignDanieli CorporationDunaway Inc.GIA Clecim Kredit Automation & ControlsLake Park Tool & Machine Inc. The Oilgear CompanyPresezzi Extrusion NAPresezzi Extrusion SpASerVaas Factories InternationalShin Jye Industrial Co. Ltd. Siddharth IndustriesSMS Meer Inc. Sunwoo Engineering Co., Ltd. Tecalex USAThumb Tool & Engineering Turla S.r.l. UBE Machinery Inc. Zircar Refractory Composites, Inc.

PRESSES Cunningham Machine DesignDanieli CorporationDunaway Inc.Extral TechnologyGIA Clecim Jinli Machinery Manufactuer Co., Ltd. Presezzi Extrusion NAPresezzi Extrusion SpAShin Jye Industrial Co. Ltd. Siddharth IndustriesSMS Meer Inc. Sunwoo Engineering Co., Ltd. Tecalex USATurla S.r.l. UBE Machinery Inc.

PROCESS CONTROL & AUTOMATION SYSTEMS

ABB Inc., Metallurgy ProductsAccurate Sensors TechnologiesAdvanced Dynamics Air Products and Chemicals, Inc.Castool Tooling SystemsCunningham Machine DesignGIA Clecim Italtecno SRLOtto Junker GmbH Kredit Automation & ControlsMechatherm International LimitedNitrex Metal GmbHNitrex Metal Inc.Novatec Process Systems Inc.Novelis PAEThe Oilgear CompanyPA – Profile AutomationPermatech Inc.PMC Systems LimitedPrecimeter Control ABPresezzi Extrusion NAPresezzi Extrusion SpARemelt Technologies, Inc. Sentech Precimeter Inc. UBE Machinery Inc. Wagstaff, Inc.

PROFILE FINISHING EQUIPMENT

C.M. Surface Treatment S.p.A.Emmebi SRLGuyson CorporationHandtmann CNC Technologies, Inc.

PA – Profile AutomationTecalex USATrasmetal S.p.A.Turla srl

PUBLICATIONS (EXTRUSION)AlkenBeuth Verlag GmbHAlfin-Edimet S.P.A.Italtecno SRL (Interall)Kennedy Eurotech Inc.

PULLERS Belco Industries, Inc.R.L. Best CompanyDunaway Inc.Furnace Engineering Pty. Ltd.GIA Clecim Granco Clark Inc.OKD Okad Dee Co. Ltd. OMAV S.p.A.PA – Profile AutomationREISCH Maschinenbau GmbHSiddharth IndustriesSMS Meer Inc. Sunwoo Engineering Co., Ltd. Tecalex USATurla S.r.l.

QUALITY CONTROL TEST EQUIPMENT

Accurate Sensors Technologies Ltd.Hertwich Engineering GmbHiNOEX LLCTaber Industries

QUENCHING SYSTEMS Belco Industries, Inc.Castool Tooling SystemsCunningham Machine DesignFurnace Engineering Pty. Ltd.GIA Clecim Granco Clark Inc.Otto Junker GmbH OKD Okad Dee Co. Ltd. OMAV S.p.A.REISCH Maschinenbau GmbHPA – Profile AutomationTecalex USATurla S.r.l.

RACKS/STACKERS/DESTACKERS

ACI-CanefcoAdvanced Dynamics Emmebi SRLFurnace Engineering Pty. Ltd.GIA Clecim Granco Clark Inc.OMAV S.p.A.PA – Profile AutomationTecalex USATurla S.r.l.

REFRACTORIESCOIM srlNovelis PAEPyrotek Inc.Scottish Chemical IndustriesThorpe Technologies Inc.Wahl Refractory Solutions, LLC



ZIRCAR Ceramics, Inc.Zircar Refractory Composites, Inc.

ROTARY EXTRUSION SYSTEMS

Confex Technology Ltd.Cunningham Machine DesignHolton Crest Ltd. Tecalex USA

RUNOUT ROLLERS Albarrie Canada LimitedButech BlissCastool Tooling SystemsDunaway Inc.Furnace Engineering Pty. Ltd.GIA Clecim Ichikawa North America Marathon Belting Ltd. Northern InnovationsOKD Okad Dee Co. Ltd. OMAV S.p.A.PA – Profile AutomationTurla S.r.l.

SAWS/ SAW CONSUMABLESAdvanced Dynamics Belco Industries, Inc.R.L. Best CompanyDry-Lube Intl. Inc. FomUSAFriggi N.A. Inc. Furnace Engineering Pty. Ltd.GIA Clecim Granco Clark Inc.Handtmann CNC TechnologiesHertwich Engineering GmbHHPI GmbHOtto Junker GmbH MetlSaw Systems mfs engineering ltd.August Mössner GmbH + Co. KGOKD Okad Dee Co. Ltd. OMAV S.p.A.PA – Profile AutomationREISCH Maschinenbau GmbHRomidot Ltd. Sermas Industrie Siddharth IndustriesSistem Teknik Ltd. STI.Starcut SRLTecalex USATru-Cut Saw, Inc.

SHEARS Belco Industries, Inc.R.L. Best CompanyButech BlissCastool Tooling SystemsCunningham Machine DesignEmmebi SRLFurnace Engineering Pty. Ltd.GIA Clecim Granco Clark Inc.Otto Junker GmbH OKD Okad Dee Co. Ltd. OMAV S.p.A.PA – Profile AutomationREISCH Maschinenbau GmbHSiddharth IndustriesSistem Teknik Ltd. STI.

SMS Meer Inc. Tecalex USAThumb Tool & Engineering Turla S.r.l.

STIRRERS ABB Inc., Metallurgy ProductsFurnace Engineering Pty. Ltd.Pyrotek Inc.Zmag America, Ltd.

STRAIGHTENERS Butech BlissConfex Technology Ltd.Furnace Engineering Pty. Ltd.PA – Profile AutomationSMS Meer Inc.

STRETCHERS Belco Industries, Inc.R.L. Best CompanyButech BlissCunningham Machine DesignDunaway Inc.Furnace Engineering Pty. Ltd.GIA Clecim Granco Clark Inc.OKD Okad Dee Co. Ltd. OMAV S.p.A.PA – Profile AutomationShin Jye Industrial Co. Ltd. Siddharth IndustriesSunwoo Engineering Co., Ltd. Tecalex USATurla S.r.l.

TABLE COOLERS/FANS Belco Industries, Inc.Furnace Engineering Pty. Ltd.GIA Clecim Granco Clark Inc.OMAV S.p.A.PA – Profile AutomationShin Jye Industrial Co. Ltd. Turla S.r.l.

TEMPERATURE MEASUREMENT SYSTEMS

(NONCONTACT) Accurate Sensors TechnologiesCastool Tooling SystemsN.T.K. Plants Management &

Trading Ltd.PA – Profile AutomationPresezzi Extrusion NAPresezzi Extrusion SpAWilliamson Corp.

THERMAL BREAK EQUIPMENTAzonFomUSAPA – Profile Automation

TOOL HANDLING EQUIPMENT Castool Tooling SystemsCunningham Machine DesignGIA Clecim REISCH Maschinenbau GmbHSMS Meer Inc. Thumb Tool & Engineering

TOOL STEELS BC SalvageBöhler-UddeholmConfex Technology Ltd.Elite Extrusion Die Ltd.Kind & Co. Edelstahlwerk, KGStarcut SRL

TOOLING Adex B.V.Almex USA Inc. Alumat & Almax MoriAmega IndustriesBC SalvageR.L. Best CompanyBöhler-UddeholmCastool Tooling SystemsCompes InternationalCompes S.P.A.Dunaway Inc.ETS – Exco Canada, Colombia,

Michigan, and TexasGIA Clecim I.A.S. GmbHKind & Co. Edelstahlwerk, KGLake Park Tool & Machine Inc. Novelis PAEPresezzi Extrusion NAPresezzi Extrusion SpASchmidt + Clemens GroupSiddharth IndustriesSMS Meer Inc. Southeastern Extrusion & Tool, Inc.Starcut SRL

USED EQUIPMENT/ EQUIPMENT AGENTS (PRIMARY BUSINESS)

Extrusion Press Services UK Ltd.ExtrusionSuppliesKipco International Inc.Machinery International Corp.Phipps CompanySerVaas Factories International

List Your Company in Our Next

Extrusion Directory

To find out how to get your com-pany listed in the next Directory of Aluminum Extrusion Equipment Manufacturers & Suppliers, email Light Metal Age at lma@lightmetal age.com, fax us at 650-588-0901, or call 650-588-8832 with your name and company contact information.

To learn more, visit us at:www.lightmetalage.com

Directory of Secondary Aluminum Equipment Manufacturers & SuppliersCategories/Companies

Index to Directory of Secondary Aluminum* Equipment Manufacturers & Suppliers


Alloying Elements .................................................... 16Automation/Control Systems ................................... 16Briquetting ............................................................... 16Casting Equipment - Billet/Slab/Ingot/Strip .............. 16Chip Handling .......................................................... 16Chip Melter .............................................................. 16Combustion Equipment ........................................... 16Compactors ............................................................. 17Consulting Engineers (Primary Business) ............... 17Conveyors ............................................................... 17Degassing ................................................................ 17Delacquering/Decoating Equipment ........................ 17Dross Cooling Equipment ........................................ 17Dross Handling Equipment ...................................... 17Electromagnetic Stirring Equipment ........................ 17Furnace Charging Machines ................................... 17Furnace Tending Machines ..................................... 17Furnaces – Holding ................................................. 17Furnaces – Homogenizing ....................................... 17Furnaces – Melting .................................................. 17Furnaces – Preheat ................................................. 18Furnaces – Rotary ................................................... 18Grain Refining Rod Dispensers ............................... 18Hydraulic Drive Systems ......................................... 18Hydrogen Analyzers ................................................ 18Inclusion Measurement ........................................... 18Industrial Gases ....................................................... 18Ingot Stacking/Handling Equipment ........................ 18Ladle Equipment ...................................................... 18

Launders, Troughs, Crucibles ................................. 18Lubrication/Coatings ................................................ 18Material Handling Equipment/Vehicles .................... 18Metallographic Services .......................................... 18Metal Measurement/Testing .................................... 18Molds ....................................................................... 18Molten Level Control ................................................ 18Molten Metal Analysis .............................................. 19Molten Metal Filtration ............................................. 19Molten Metal Pumps ................................................ 19Molten Metal Transfer Trucks .................................. 19Pollution Control Equipment .................................... 19Quality Control ......................................................... 19Refractory Supply/Maintenance .............................. 19Rotary Gas/Flux Injectors ........................................ 19Rotary Kilns/Dryers .................................................. 19Sawing Systems/Equipment .................................... 19Scrap Submergence Systems ................................. 19Separation Systems ................................................ 19Shredders ................................................................ 19Sow Casting/Handling Equipment ........................... 19Stirring/Vortexing Equipment ................................... 19Strapping/Packaging ............................................... 19Temperature Measurement/Control Equipment ...... 19Ultrasonic Testing .................................................... 19Used Equipment (Primary Business) ....................... 19Vibratory Feeders .................................................... 19Weighing Equipment ............................................... 19

*Secondary aluminum producers are defined as secondary smelters and remelters of aluminum. Secondary smelters process different types of scrap, while remelters process billet or pure scrap of one or more alloy.

ALLOYING ELEMENTS Almex USA Inc.AMG Aluminum North America, LLCA. Cesana SrlExcellent Foundry Fluxes CompanyPyrotek Inc.Scottish Chemical IndustriesSurface Combustion, Inc.

AUTOMATION/ CONTROL SYSTEMS

ABB Inc.Advanced Dynamics Almex USA Inc.Butech BlissCan-Eng Furnaces International Ltd.Gillespie & Powers, Inc.Hencon B.V.HycastInnovathermLindeMechatherm International Ltd.Metal 7 Inc.Novelis PAEOutotecPMC Systems, Inc.Precimeter Control ABPrecimeter Inc.Sistem Teknik Ltd. STISTAS Inc.Surface Combustion, Inc.Wagstaff, Inc.

BRIQUETTINGHertwich EngineeringJMC Recycling Systems Ltd.

CASTING EQUIPMENT – BILLET/ SLAB/ INGOT/ STRIP

Almex USA Inc.Bosch Rexroth CorporationCastal EngineeringA. Cesana SrlConsolidated Ceramic Products Inc.Continuus Properzi S.P.A.Gautschi Engineering GmbHHertwich EngineeringHPI GmbHHycastLOI Thermprocess GmbH Mansell and AssociatesMechatherm International Ltd.mfs Metallurgical Furnace SystemsNovelis PAEo.d.t. Engineering Pty Ltd.OutotecPermatech Inc.Properzi International, Inc.Pyrotek Inc.Remelt Technologies, Inc.SCR TechnologiesSistem Teknik Ltd. STIStelter & BrinkWagstaff, Inc.

CHIP HANDLINGACI-CanefcoAdvanced Dynamics Mechatherm International Ltd.Sistem Teknik Ltd. STI

CHIP MELTERGillespie & Powers, Inc.GNA alutech inc.Molten Metal Equipment InnovationsSistem Teknik Ltd. STIZmag America, Ltd.

COMBUSTION EQUIPMENTAir Liquide Industrial U.S. LPAir Products and Chemicals, Inc.Bloom EngineeringFives North American CombustionFurnace Engineering Pty. Ltd.Gillespie & Powers, Inc.Hauck Manufacturing CompanyHCT Ltd. InnovathermLindeMajor Furnace AustraliaMechatherm International Ltd.Metal 7 Inc.mfs Metallurgical Furnace SystemsNorth American ConstructionRemelt Technologies, Inc.Sistem Teknik Ltd. STIStelter & BrinkSurface Combustion, Inc.



Thorpe Technologies Inc.VHE ehf

COMPACTORSJMC Recycling Systems Ltd. SSI Shredding Systems, Inc.

CONSULTING ENGINEERS (PRIMARY BUSINESS)

B.S. MetallurgyHatchPenta Engineering P.A.Quality Consultants BV

CONVEYORSACI-CanefcoAdvanced Dynamics Bosch Rexroth CorporationGLAMA Maschinenbau GmbHInfa S.A.Mansell and AssociatesMetal 7 Inc.o.d.t. Engineering Pty Ltd.

DEGASSINGAlmex USA Inc.Apogee Technology, Inc. A. Cesana SrlContinuus Properzi S.P.A.Excellent Foundry Fluxes CompanyFurnace Engineering Pty. Ltd.Gautschi Engineering GmbHHycastMechatherm International Ltd.Mersen USA Greenville-MI Corp.Molten Metal Equipment InnovationsNovelis PAEPermatech Inc.Properzi International, Inc.Pyrotek Inc.Refraco Inc.Scottish Chemical IndustriesSCR TechnologiesSistem Teknik Ltd. STISTAS Inc.

DELACQUERING/ DECOATING EQUIPMENT

Apogee Technology, Inc. Chinook Sciences LLCConsolidated Engineering CompanyGillespie & Powers, Inc.Major Furnace AustraliaMechatherm International Ltd.Sistem Teknik Ltd. STIThorpe Technologies Inc.

DROSS COOLING EQUIPMENTALTEK, LLCJMC Recycling Systems Ltd.Mansell and AssociatesOutotecPyrotek Inc.STAS Inc.

DROSS HANDLING EQUIPMENT

Advanced Dynamics ALTEK, LLCMajor Furnace AustraliaMansell and Associates

Mechatherm International Ltd.mfs Metallurgical Furnace Systems

ELECTROMAGNETIC STIRRING EQUIPMENT

ABB Inc.ALTEK, LLCFurnace Engineering Pty. Ltd.Gillespie & Powers, Inc.Hertwich EngineeringInductotherm Corp.Mechatherm International Ltd.Solios Thermal

FURNACE CHARGING MACHINES

ACI-CanefcoAdvanced Dynamics Consolidated Engineering CompanyFurnace Engineering Pty. Ltd.GHI Hornos Industriales, S.L.GLAMA Maschinenbau GmbHGNA alutech inc.Hencon B.V.Hertwich EngineeringHPI GmbHInductotherm Corp.Otto Junker GmbHMajor Furnace AustraliaMansell and AssociatesMechatherm International Ltd.mfs Metallurgical Furnace Systems Outotec Pyrotek Inc.Remelt Technologies, Inc.Sistem Teknik Ltd. STISurface Combustion, Inc.Thorpe Technologies Inc.

FURNACE TENDING MACHINESAdvanced Dynamics GHI Hornos Industriales, S.L.GLAMA Maschinenbau GmbHHencon B.V.Hertwich EngineeringMechatherm International Ltd.mfs Metallurgical Furnace Systems

FURNACES – HOLDINGACI-CanefcoAlmex USA Inc.Apogee Technology, Inc. Castal EngineeringA. Cesana SrlContinuus Properzi S.P.A.EFRFurnace Engineering Pty. Ltd.Gautschi Engineering GmbHGHI Hornos Industriales, S.L.Gillespie & Powers, Inc.GNA alutech inc.Hauck Manufacturing CompanyHertwich EngineeringInfa S.A.Otto Junker GmbHLOI Thermprocess GmbH Major Furnace AustraliaMansell and AssociatesMechatherm International Ltd.mfs Metallurgical Furnace Systems North American ConstructionPermatech Inc.

Properzi International, Inc.Pyrotek Inc.Refraco Inc.The Schaefer Group, Inc.SECO/WarwickSistem Teknik Ltd. STISolios ThermalStelter & BrinkSurface Combustion, Inc.Thorpe Technologies Inc.

FURNACES – HOMOGENIZINGACI-CanefcoAlmex USA Inc.Apogee Technology, Inc. Can-Eng Furnaces International Ltd. Consolidated Engineering CompanyEFRFurnace Engineering Pty. Ltd.Gautschi Engineering GmbHGHI Hornos Industriales, S.L.GNA alutech inc.Hauck Manufacturing CompanyHertwich EngineeringHPI GmbHOtto Junker GmbHLOI Thermprocess GmbH Mechatherm International Ltd.mfs Metallurgical Furnace SystemsNorth American ConstructionRefraco Inc.Remelt Technologies, Inc.SECO/WarwickSistem Teknik Ltd. STISolios ThermalStelter & BrinkTellkamp Systems, Inc.Thorpe Technologies Inc.

FURNACES – MELTINGACI-CanefcoAir Liquide Industrial U.S. LPAlmex USA Inc.Apogee Technology, Inc. Castal EngineeringA. Cesana SrlContinuus Properzi S.P.A.EFRFurnace Engineering Pty. Ltd.Gautschi Engineering GmbHGHI Hornos Industriales, S.L.Gillespie & Powers, Inc.GNA alutech inc.Hauck Manufacturing CompanyHertwich EngineeringInductotherm Corp.Otto Junker GmbHLOI Thermprocess GmbH Major Furnace AustraliaMansell and AssociatesMechatherm International Ltd.mfs Metallurgical Furnace SystemsNorth American ConstructionPermatech Inc.Properzi International, Inc.Refraco Inc.The Schaefer Group, Inc.SECO/WarwickSistem Teknik Ltd. STISolios ThermalStelter & BrinkThorpe Technologies Inc.



FURNACES – PREHEATACI-CanefcoConsolidated Engineering CompanyEFRFurnace Engineering Pty. Ltd.GHI Hornos Industriales, S.L.Gillespie & Powers, Inc.GNA alutech inc.Hauck Manufacturing CompanyOtto Junker GmbHLOI Thermprocess GmbH Major Furnace AustraliaMechatherm International Ltd.North American ConstructionPermatech Inc.Refraco Inc.SECO/WarwickSistem Teknik Ltd. STISolios ThermalStelter & BrinkSurface Combustion, Inc.Thorpe Technologies Inc.VHE ehf Zircar Refractory Composites, Inc.

FURNACES – ROTARYALTEK, LLCCan-Eng Furnaces International Ltd.Consolidated Engineering Company Furnace Engineering Pty. Ltd.GHI Hornos Industriales, S.L.Gillespie & Powers, Inc.Hauck Manufacturing CompanyHertwich EngineeringLOI Thermprocess GmbH Major Furnace AustraliaMansell and AssociatesMechatherm International Ltd.mfs Metallurgical Furnace SystemsRefraco Inc.SECO/WarwickSistem Teknik Ltd. STIStelter & BrinkSurface Combustion, Inc.Thorpe Technologies Inc.

GRAIN REFINING ROD DISPENSERS

Acme Machine Works, Inc.Almex USA Inc.AMG Aluminum North America, LLCApogee Technology, Inc. A. Cesana SrlHycastInfa S.A.Mechatherm International Ltd.o.d.t. Engineering Pty Ltd.Scottish Chemical Industries

HYDRAULIC DRIVE SYSTEMSApogee Technology, Inc. Bosch Rexroth CorporationMajor Furnace Australiamfs Metallurgical Furnace SystemsVHE ehf

HYDROGEN ANALYZERSABB Analytical MeasurementAir Liquide Industrial U.S. LPAlmex USA Inc.A. Cesana SrlPyrotek Inc.

Scottish Chemical Industries

INCLUSION MEASUREMENTABB Analytical MeasurementAlmex USA Inc.Pyrotek Inc.

INDUSTRIAL GASESAir Liquide Industrial U.S. LPAir Products and Chemicals, Inc.Almex USA Inc.Linde

INGOT STACKING/ HANDLING EQUIPMENT

ACI-CanefcoAcme Machine Works, Inc.Advanced Dynamics Bradley Lifting Corp.Continuus Properzi S.P.A.Gautschi Engineering GmbHHertwich EngineeringJMC Recycling Systems Ltd. Mansell and AssociatesMetal 7 Inc.mfs Metallurgical Furnace Systemso.d.t. Engineering Pty Ltd.Outotec Permatech Inc.Properzi International, Inc.Stelter & Brink

LADLE EQUIPMENTBosch Rexroth CorporationFurnace Engineering Pty. Ltd.Gillespie & Powers, Inc.GLAMA Maschinenbau GmbHHencon B.V.LindeMansell and AssociatesMetal 7 Inc.mfs Metallurgical Furnace SystemsNorth American ConstructionOutotecPermatech Inc.Pyrotek Inc.Refraco Inc.The Schaefer Group, Inc.Scottish Chemical IndustriesSTAS Inc.Stelter & Brink

LAUNDERS, TROUGHS, CRUCIBLES

ACI-CanefcoAlmex USA Inc.Apogee Technology, Inc. A. Cesana SrlFurnace Engineering Pty. Ltd.GES Graphite Gillespie & Powers, Inc.Hencon B.V.HycastInfa S.A.Mansell and AssociatesMechatherm International Ltd.mfs Metallurgical Furnace SystemsMolten Metal Equipment InnovationsNorth American ConstructionOutotec Permatech Inc.Pyrotek Inc.

Refraco Inc.The Schaefer Group, Inc.Scottish Chemical IndustriesSELEE CorporationSolios ThermalSTAS Inc.Stelter & BrinkThorpe Technologies Inc.Wagstaff, Inc.Wahl Refactory SolutionsZIRCAR Ceramics

LUBRICATION/ COATINGSAlmex USA Inc.Apogee Technology, Inc. A. Cesana SrlDryLubeMetal 7 Inc.Novelis PAEPermatech Inc.Pyrotek Inc.Scottish Chemical IndustriesZIRCAR Ceramics

MATERIAL HANDLING EQUIPMENT/ VEHICLES

Bosch Rexroth CorporationButech BlissConsolidated Engineering CompanyGLAMA Maschinenbau GmbHHencon B.V.HPI GmbHJMC Recycling Systems Ltd.Permatech Inc.Solios ThermalSurface Combustion, Inc.

METALLOGRAPHIC SERVICESABB Analytical MeasurementPyrotek Inc.SELEE Corporation

METAL MEASUREMENT/ TESTING

ABB Analytical MeasurementAlmex USA Inc.HycastPrecimeter Inc.Pyrotek Inc.Wagstaff, Inc.

MOLDSAlmex USA Inc.ALTEK, LLCGautschi Engineering GmbHGES GraphiteHycastMersen USA Greenville-MI Corp.Novelis PAEo.d.t. Engineering Pty Ltd.Wagstaff, Inc.

MOLTEN LEVEL CONTROLAlmex USA Inc.Apogee Technology, Inc. Consolidated Ceramic Products Inc. Furnace Engineering Pty. Ltd.Gautschi Engineering GmbHGillespie & Powers, Inc.HycastInfa S.A.



Mechatherm International Ltd.Molten Metal Equipment InnovationsNovelis PAEOutotec Precimeter Control ABPrecimeter Inc.STAS Inc. VHE ehf Wagstaff, Inc.

MOLTEN METAL ANALYSISABB Analytical MeasurementAlmex USA Inc.

MOLTEN METAL FILTRATIONACI-CanefcoAlmex USA Inc.Apogee Technology, Inc. Gautschi Engineering GmbHHycastInfa S.A.Mechatherm International Ltd.Molten Metal Equipment InnovationsNovelis PAEPermatech Inc.Properzi International, Inc.Pyrotek Inc.The Schaefer Group, Inc.Scottish Chemical IndustriesSELEE CorporationUrja Products Pvt. Ltd.Zircar Refractory Composites, Inc.

MOLTEN METAL PUMPSApogee Technology, Inc. GES GraphiteGillespie & Powers, Inc.Major Furnace AustraliaMechatherm International Ltd.Molten Metal Equipment InnovationsPermatech Inc.Precimeter Control ABPyrotek Inc.Zmag America, Ltd.

MOLTEN METAL TRANSFER TRUCKS

GLAMA Maschinenbau GmbHSTAS Inc.

POLLUTION CONTROL EQUIPMENT

Chinook Sciences LLCGillespie & Powers, Inc.InnovathermMansell and AssociatesMikropul/NedermanStelter & BrinkSurface Combustion, Inc.Tellkamp Systems, Inc.

QUALITY CONTROLABB Analytical MeasurementAlmex USA Inc.Apogee Technology, Inc. Permatech Inc.Pyrotek Inc.Quality Consultants B.V.

REFRACTORY SUPPLY/ MAINTENANCE

Almex USA Inc.

Apogee Technology, Inc. Gillespie & Powers, Inc.Infa S.A.Major Furnace AustraliaMechatherm International Ltd.North American ConstructionNovelis PAEPermatech Inc.Pyrotek Inc.Refraco Inc.The Schaefer Group, Inc.STAS Inc.Stelter & BrinkSurface Combustion, Inc.Wahl Refactory SolutionsZIRCAR Ceramics Zircar Refractory Composites, Inc.

ROTARY GAS/ FLUX INJECTORS

Almex USA Inc.Apogee Technology, Inc. Excellent Foundry Fluxes CompanyGES GraphiteMolten Metal Equipment InnovationsSTAS Inc.

ROTARY KILNS/ DRYERSGillespie & Powers, Inc.Hauck Manufacturing CompanyMajor Furnace AustraliaSistem Teknik Ltd. STISurface Combustion, Inc.Thorpe Technologies Inc.

SAWING SYSTEMS/ EQUIPMENT

ACI-CanefcoAcme Machine Works, Inc.Advanced Dynamics Bosch Rexroth CorporationHertwich EngineeringHPI GmbHMajor Furnace AustraliaMetlSaw Systems Inc.mfs Metallurgical Furnace SystemsAugust Mössner GmbH + Co. KGOutotec REISCH Maschinenbau GmbHSermas IndustrieSistem Teknik Ltd. STI

SCRAP SUBMERGENCE SYSTEMS

Apogee Technology, Inc. Furnace Engineering Pty. Ltd.Gillespie & Powers, Inc.Hertwich EngineeringMolten Metal Equipment InnovationsPyrotek Inc.Stelter & BrinkZmag America, Ltd.

SEPARATION SYSTEMSZmag America, Ltd.

SHREDDERSBosch Rexroth CorporationGranutech – Saturn Systems JMC Recycling Systems Ltd. SSI Shredding Systems, Inc.

SOW CASTING/ HANDLING EQUIPMENT

Acme Machine Works, Inc.Advanced Dynamics Bosch Rexroth CorporationBradley Lifting Corp.Mansell and AssociatesMechatherm International Ltd.mfs Metallurgical Furnace Systemso.d.t. Engineering Pty Ltd.Outotec Stelter & BrinkWagstaff, Inc.

STIRRING/ VORTEXING EQUIPMENT

Almex USA Inc.ALTEK, LLCApogee Technology, Inc. Furnace Engineering Pty. Ltd.Gillespie & Powers, Inc.Pyrotek Inc.STAS Inc.Zmag America, Ltd.

STRAPPING/ PACKAGINGACI-CanefcoAdvanced Dynamics Hertwich EngineeringOutotecREISCH Maschinenbau GmbHScottish Chemical Industries

TEMPERATURE MEASUREMENT/ CONTROL

EQUIPMENTAccurate Sensors Technologies Ltd.Almex USA Inc.Consolidated Ceramic Products Inc. Hauck Manufacturing CompanyInnovathermMechatherm International Ltd.Metal 7 Inc.Pyrotek Inc.Scottish Chemical IndustriesStelter & BrinkVHE ehf Williamson Corp.

ULTRASONIC TESTINGACI-CanefcoAdvanced Dynamics Almex USA Inc.Hertwich EngineeringHPI GmbH

USED EQUIPMENT (PRIMARY BUSINESS)

Phipps Company

VIBRATORY FEEDERSFurnace Engineering Pty. Ltd.Gillespie & Powers, Inc.Mansell and AssociatesOutotec

WEIGHING EQUIPMENTHertwich EngineeringOutotec


Index to Directory of Flat Rolled Aluminum Equipment Manufacturers and Suppliers

Annealing Lines ...................................................... 21Automation Systems ................................................ 21Baling/Briquetting Machines .................................... 21Coating Lines ........................................................... 21Coil Processing Systems ......................................... 21Combustion Equipment ........................................... 21Continuous Caster Tips ........................................... 21Continuous Casting Systems – Rod ........................ 21Continuous Casting Systems – Sheet ..................... 21Continuous Casting Systems – Slab, Ingot, T-Bar ...... 21Continuous Casting Systems – Strip ....................... 21Cut-to-Length Lines ................................................. 21Degassing ................................................................ 21Delacquering Equipment ......................................... 21Doubling Machines .................................................. 21Dross Removal/Cooling .......................................... 21Edge Guiding Systems ............................................ 21Education/Training ................................................... 21Electromagnetic Stirrers .......................................... 21Embossing Equipment ............................................. 21Filtration Equipment, Molten Metal .......................... 22Filtration Systems, Coolant ...................................... 22Flatness Measurement and Control Systems .......... 22Flux/Fluxing ............................................................. 22Foil Processing Equipment ...................................... 22Fume Extraction Systems ........................................ 22Furnace Rebuilds .................................................... 22Furnaces – Heat Treatment ..................................... 22Furnaces – Melting and Holding .............................. 22Furnaces – Slab Heating ......................................... 22Gauge Control Systems .......................................... 22Gauges, Thickness .................................................. 22Grain Refining Rod Dispensers ............................... 22Hydraulic Equipment ............................................... 22Inspection Equipment/Analyzers ............................. 22Leveling Lines, Tension and Roller ......................... 23Load Cells ................................................................ 23

Lubrication ............................................................... 23Lubrication – Casthouse Coatings ........................... 23Lubrication – Rolling Oils ......................................... 23Material Handling Equipment .................................. 23Material Handling Equipment – Coil Carriers .......... 23Material Handling Equipment – Coil Storage ........... 23Material Handling Equipment – Transfer Cars ........ 23Metal Level Controls ................................................ 23Metal Level Sensors ................................................ 23Molds, Continuous Casting ...................................... 23Plant Revamps/Equipment Retrofitting .................... 23Process Control Systems ........................................ 23Programmable Controllers ....................................... 23Pumps, Molten Metal ............................................... 23Quality Control Test Equipment ............................... 23Refractories ............................................................. 23Rewinding Machines ............................................... 23Roll Grinding Machines .......................................... 23Rolling Mills – Cold .................................................. 23Rolling Mills – Foil .................................................... 23Rolling Mills – Hot .................................................... 24Rolls ......................................................................... 24Sawing Machines and Cutting Tools ....................... 24Scrap Melting ........................................................... 24Scrap Preparation Equipment ................................. 24Separating Machines ............................................... 24Shape Control Systems ........................................... 24Simulation/Modeling/Software ................................. 24Slitting Lines ............................................................ 24Soaking Pits ............................................................. 24Spectrographic Equipment ...................................... 24Spray Cooling/Heating Systems .............................. 24Surface Treatment ................................................... 24Technical/Engineering Services .............................. 24Temperature Measurement ..................................... 24Used Equipment (Primary Business) ....................... 24Ventilation ................................................................ 24

Directory of Flat Rolled Aluminum Equipment Manufacturers and SuppliersCategories/Companies


Annealing Lines ACI-CanefcoBWG Machinery CorporationConsolidated Engineering CompanyDanieli & Co. SpAEbner Furnaces, Inc. Furnace Engineering Pty. Ltd.Otto Junker GmbHLechler, Inc.LOI Thermprocess GmbHMajor Furnace Australia SECO/WarwickSistem Teknik Ltd. STI SMS Siemag LLCVIG Makina San Tic. Ltd. Sti.

Automation SystemsCNPTCOGNEX Corp.Consolidated Engineering CompanyDanieli & Co. SpAEbner Furnaces, Inc. FATA Hunter, Division of FATA S.p.A.Gillespie & Powers, Inc.Hatch-IASOtto Junker GmbHMechatherm International Ltd.Novelis PAEPMC Systems LimitedSentech Precimeter Inc. SenTek CorporationSiemensSistem Teknik Ltd. STI SMS Siemag LLCWagstaff, Inc.Wellman Furnaces Ltd.

Baling/Briquetting MachinesLogemann Brothers Company

Coating LinesBWG Machinery CorporationFATA Hunter, Division of FATA S.p.A.Fitch Metals EngineeringHatch-IASKampf Machinery CorporationLechler, Inc.Major Furnace Australia Pyrotek Inc.VIG Makina San Tic. Ltd. Sti.

Coil Processing SystemsButech BlissBWG Machinery CorporationConsolidated Engineering CompanyDanieli & Co. SpAFATA Hunter, Division of FATA S.p.A.Fitch Metals EngineeringHerr-Voss StamcoSiemensSMS Siemag LLC

Combustion EquipmentAir Products and Chemicals, Inc. Bloom Engineering Inc. Ebner Furnaces, Inc. Fives North American CombustionGillespie & Powers, Inc.Hauck Manufacturing CompanyHCT Ltd. Otto Junker GmbH

Major Furnace Australia Thorpe Technologies Inc.Wellman Furnaces Ltd.

Continuous Caster TipsFATA Hunter, Division of FATA S.p.A.Lechler, Inc.Novelis PAEPermatech Inc. Pyrotek Inc.ZIRCAR Ceramics, Inc.

Continuous Casting Systems – Rod

ACI-CanefcoCastal EngineeringContinuus-Properzi S.P.A.Gautschi Engineering GmbHLechler, Inc.Novelis PAEProperzi International, Inc. Pyrotek Inc.Quality ConsultantsSouthwire SCR Technologies

Continuous Casting Systems – Sheet

Castal EngineeringCNPTFATA Hunter, Division of FATA S.p.A.Hazelett Strip-Casting Lechler, Inc.Novelis PAEBruno Presezzi SpAPyrotek Inc.VIG Makina San Tic. Ltd. Sti.

Continuous Casting Systems – Slab, Ingot, T-Bar

Castal EngineeringCNPTContinuus-Properzi S.P.A.Gautschi Engineering GmbHHertwich EngineeringNovelis PAEo.d.t. Engineering Pty. Ltd.Properzi International, Inc. Pyrotek Inc.SMS Siemag LLCVIG Makina San Tic. Ltd. Sti.

Continuous Casting Systems – Strip

Castal EngineeringCNPTContinuus-Properzi S.P.A.FATA Hunter, Division of FATA S.p.A.Hazelett Strip-Casting Lechler, Inc.Novelis PAEBruno Presezzi SpAProperzi International, Inc. Pyrotek Inc.SiemensSMS Siemag LLCVIG Makina San Tic. Ltd. Sti.

Cut-to-Length LinesACI-CanefcoAdvanced Machine & EngineeringButech Bliss

CNPTDanieli & Co. SpAFATA Hunter, Division of FATA S.p.A.Herr-Voss StamcoAugust Mössner GmbH + Co. KG

Degassing Air Products and Chemicals, Inc. Castal EngineeringCNPTExcellent Foundry Fluxes CompanyFurnace Engineering Pty. Ltd.Gautschi Engineering GmbHMolten Metal Equipment Innovations Novelis PAEPermatech Inc. Pyrotek Inc.Quality ConsultantsScottish Chemical Industry Sistem Teknik Ltd. STI SMS Siemag LLCSTAS Inc.VIG Makina San Tic. Ltd. Sti.Wahl Refractory Systems

Delacquering EquipmentConsolidated Engineering CompanyGillespie & Powers, Inc.Major Furnace Australia Nederman FiltrationSistem Teknik Ltd. STI Thorpe Technologies Inc.

Doubling MachinesCNPTKampf Machinery CorporationKampf Schneid- und Wickeltechnik

Dross Removal/Cooling Major Furnace Australia Pyrotek Inc.T.T. Tomorrow Technology S.P.A.

Edge Guiding SystemsABB Force MeasurementFives North American CombustionM.E.A., Inc.

Education/TrainingDanieli & Co. SpAGillespie & Powers, Inc.Hatch-IASHauck Manufacturing CompanyInnoval TechnologySMS Siemag LLCSTAS Inc.Stines Equipment CompanyVIG Makina San Tic. Ltd. Sti.

Electromagnetic StirrersABB Inc., Metallurgy ProductsFurnace Engineering Pty. Ltd.Gautschi Engineering GmbHPyrotek Inc.Quality ConsultantsFives Solios

Embossing EquipmentAlliance Machinery and EngravingVIG Makina San Tic. Ltd. Sti.



Filtration Equipment, Molten Metal

Castal EngineeringContinuus-Properzi S.P.A.Gautschi Engineering GmbHMolten Metal Equipment Innovations Novelis PAEo.d.t. Engineering Pty. Ltd.Permatech Inc. Properzi International, Inc. Pyrotek Inc.The Schaefer Group, Inc. Scottish Chemical Industry Selee CorporationSistem Teknik Ltd. STI STAS Inc.Urja Products Pvt. Ltd.

Filtration Systems, CoolantAchenbach Buschhuetten GmbH AMCOL CorporationBusch InternationalDanieli & Co. SpAHerkules North America Corp. SiemensStines Equipment Company

Flatness Measurement and Control Systems

ABB Force MeasurementAchenbach Buschhuetten GmbH Danieli & Co. SpAFATA Hunter, Division of FATA S.p.A.Hatch-IASHerkules North America Corp. PMC Systems LimitedSenTek CorporationSiemens

Flux/FluxingExcellent Foundry Fluxes CompanyMolten Metal Equipment Innovations Scottish Chemical Industry

Foil Processing EquipmentAchenbach Buschhuetten GmbH ACI-CanefcoFATA Hunter, Division of FATA S.p.A.Hatch-IASSiemens

Fume Extraction SystemsAchenbach Buschhuetten GmbH Busch InternationalCNPTDanieli & Co. SpANederman FiltrationSiemensSMS Siemag LLC

Furnace RebuildsACI-CanefcoBWG Machinery CorporationCastal EngineeringDanieli & Co. SpAEbner Furnaces, Inc. Fives North American CombustionFurnace Engineering Pty. Ltd.Gautschi Engineering GmbHGillespie & Powers, Inc.Mechatherm International Ltd.

Permatech Inc. Pyrotek Inc.The Schaefer Group, Inc. SECO/WarwickSMS Siemag LLCThermserve LimitedThorpe Technologies Inc.VIG Makina San Tic. Ltd. Sti.Wahl Refractory Systems Wellman Furnaces Ltd.

Furnaces – Heat TreatmentACI-CanefcoBWG Machinery CorporationCan-Eng Furnaces International Ltd. Castal EngineeringCNPTConsolidated Engineering CompanyDanieli & Co. SpAEbner Furnaces, Inc. EFR Furnace Engineering Pty. Ltd.Gautschi Engineering GmbHGNA alutech inc.Hertwich EngineeringOtto Junker GmbHLOI Thermprocess GmbHMechatherm International Ltd.SECO/WarwickSistem Teknik Ltd. STI SMS Siemag LLCFives Solios Thermserve LimitedThorpe Technologies Inc.VIG Makina San Tic. Ltd. Sti.Wahl Refractory Systems Wellman Furnaces Ltd.

Furnaces – Melting and HoldingACI-CanefcoCastal EngineeringCNPTContinuus-Properzi S.P.A.EFR Furnace Engineering Pty. Ltd.Gautschi Engineering GmbHGillespie & Powers, Inc.GNA alutech inc.Hertwich EngineeringInductotherm Corp.Otto Junker GmbHLOI Thermprocess GmbHMajor Furnace Australia Mechatherm International Ltd.Permatech Inc. Properzi International, Inc. Pyrotek Inc.Quality ConsultantsThe Schaefer Group, Inc. SECO/WarwickSistem Teknik Ltd. STI SMS Siemag LLCFives Solios Thermserve LimitedThorpe Technologies Inc.VIG Makina San Tic. Ltd. Sti.Wahl Refractory Systems Wellman Furnaces Ltd.

Furnaces – Slab HeatingACI-Canefco

CNPTConsolidated Engineering CompanyDanieli & Co. SpAEbner Furnaces, Inc. EFR Furnace Engineering Pty. Ltd.Gautschi Engineering GmbHGillespie & Powers, Inc.GNA alutech inc.Inductotherm Corp.Otto Junker GmbHMechatherm International Ltd.SECO/WarwickSistem Teknik Ltd. STI Fives Solios Thermserve LimitedThorpe Technologies Inc.VIG Makina San Tic. Ltd. Sti.Wahl Refractory Systems Wellman Furnaces Ltd.

Gauge Control SystemsAchenbach Buschhuetten GmbH Can-Eng Furnaces International Ltd. Danieli & Co. SpAFATA Hunter, Division of FATA S.p.A.Hatch-IASHerkules North America Corp. George Kelk CorporationNovelis PAESenTek CorporationSiemensSMS Siemag LLC

Gauges, ThicknessABB Force MeasurementDanieli & Co. SpAHerkules North America Corp. LMI TechnologiesSentech Precimeter Inc. SenTek Corporation

Grain Refining Rod DispensersAcme Machine Works, Inc.AMG AluminumGautschi Engineering GmbHNovelis PAEo.d.t. Engineering Pty. Ltd.Pyrotek Inc.Scottish Chemical Industry

Hydraulic EquipmentButech BlissDanieli & Co. SpAHastec Engineering/ Hastec Rebs Logemann Brothers CompanyMajor Furnace Australia SiemensSMS Siemag LLCStines Equipment Company

Inspection Equipment/Analyzers

COGNEX Corp.Gillespie & Powers, Inc.Kampf Machinery CorporationLMI TechnologiesPyrotek Inc.Scottish Chemical Industry SenTek CorporationVIG Makina San Tic. Ltd. Sti.



Leveling Lines, Tension and Roller

Butech BlissBWG Machinery CorporationCNPTDanieli & Co. SpAFATA Hunter, Division of FATA S.p.A.Fitch Metals EngineeringHerr-Voss StamcoKampf Machinery CorporationLMI TechnologiesVIG Makina San Tic. Ltd. Sti.

Load CellsABB Force MeasurementGeorge Kelk Corporation

LubricationDryLubeHastec Engineering/ Hastec RebsMajor Furnace Australia Novelis PAEPyrotek Inc.Scottish Chemical Industry

Lubrication – Casthouse Coatings

AMCOL CorporationGeneral MagnaplateNovelis PAEPyrotek Inc.Scottish Chemical Industry ZIRCAR Ceramics, Inc.

Lubrication – Rolling OilsAMCOL CorporationNovelis PAE

Material Handling EquipmentACI-CanefcoAcme Machine Works, Inc.Advanced Machine & Engineering B&O Saws, Inc.Bradley LiftingButech BlissConsolidated Engineering CompanyDaifuku WebbDanieli & Co. SpAHertwich EngineeringOtto Junker GmbHKampf Schneid- und Wickeltechniko.d.t. Engineering Pty. Ltd.Sermas IndustrieSMS Siemag LLCSouthworth Products Corp. T.T. Tomorrow Technology S.P.A.

Material Handling Equipment – Coil Carriers

Achenbach Buschhuetten GmbH Bradley LiftingButech BlissDaifuku WebbDanieli & Co. SpAOtto Junker GmbHKampf Schneid- und WickeltechnikSiemensSouthworth Products Corp.

Material Handling Equipment – Coil Storage

BWG Machinery Corporation

Daifuku WebbSiemens

Material Handling Equipment – Transfer Cars

ACI-CanefcoButech BlissBWG Machinery CorporationDaifuku WebbDanieli & Co. SpAOtto Junker GmbHSiemensSouthworth Products Corp. T.T. Tomorrow Technology S.P.A.

Metal Level ControlsFurnace Engineering Pty. Ltd.Gautschi Engineering GmbHGillespie & Powers, Inc.Otto Junker GmbHNovelis PAESentech Precimeter Inc. SMS Siemag LLCWagstaff, Inc.

Metal Level SensorsABB Force MeasurementGillespie & Powers, Inc.Otto Junker GmbHMolten Metal Equipment Innovations Novelis PAESentech Precimeter Inc. Wagstaff, Inc.

Molds, Continuous CastingACI-CanefcoGautschi Engineering GmbHGES, Inc.o.d.t. Engineering Pty. Ltd.Novelis PAESMS Siemag LLC

Plant Revamps/Equipment Retrofitting

Butech BlissBWG Machinery CorporationDanieli & Co. SpAFATA Hunter, Division of FATA S.p.A.Gautschi Engineering GmbHGillespie & Powers, Inc.Hatch-IASHerkules North America Corp. Otto Junker GmbHMechatherm International Ltd.Novelis PAEBruno Presezzi SpASiemensSMS Siemag LLCStines Equipment CompanyWahl Refractory Systems

Process Control SystemsCOGNEX Corp.Danieli & Co. SpAFATA Hunter, Division of FATA S.p.A.Hatch-IASOtto Junker GmbHMechatherm International Ltd.PMC Systems LimitedNovelis PAESentech Precimeter Inc. Siemens

SMS Siemag LLCWagstaff, Inc.Wellman Furnaces Ltd.

Programmable ControllersDanieli & Co. SpAHerkules North America Corp. PMC Systems LimitedSiemens

Pumps, Molten MetalABB Inc., Metallurgy ProductsCMI Novacast Inc.Gillespie & Powers, Inc.Molten Metal Equipment Innovations Permatech Inc. Pyrotek Inc.Sentech Precimeter Inc.

Quality Control Test EquipmentTaber Industries

RefractoriesMajor Furnace Australia Murlin Chemical, Inc.Novelis PAEPermatech Inc. Pyrotek Inc.Quality ConsultantsSelee CorporationWahl Refractory Systems ZIRCAR Ceramics, Inc.

Rewinding MachinesAchenbach Buschhuetten GmbH Acme Machine Works, Inc.Butech BlissBWG Machinery CorporationCNPTDanieli & Co. SpAKampf Machinery CorporationSiemens

Roll Grinding Machines Herkules North America Corp.

Rolling Mills – ColdAchenbach Buschhuetten GmbH Butech BlissBWG Machinery CorporationCNPTContinuus-Properzi S.P.A.Danieli & Co. SpAFATA Hunter, Division of FATA S.p.A.Herkules North America Corp. Innoval TechnologyGeorge Kelk CorporationLechler, Inc.Properzi International, Inc. SiemensSMS Siemag LLCSPX Precision Components, Fenn Div.VIG Makina San Tic. Ltd. Sti.

Rolling Mills – FoilAchenbach Buschhuetten GmbH Castal EngineeringCNPTDanieli & Co. SpAFATA Hunter, Division of FATA S.p.A.Herkules North America Corp. Innoval Technology



Lechler, Inc.SiemensSPX Precision Components, Fenn Div.VIG Makina San Tic. Ltd. Sti.

Rolling Mills – HotAchenbach Buschhuetten GmbH Butech BlissCastal EngineeringCNPTContinuus-Properzi S.P.A.Danieli & Co. SpAFATA Hunter, Division of FATA S.p.A.Herkules North America Corp. Innoval TechnologyGeorge Kelk CorporationLechler, Inc.Properzi International, Inc. SiemensSMS Siemag LLCSPX Precision Components, Fenn Div.VIG Makina San Tic. Ltd. Sti.

RollsContinuus-Properzi S.P.A.Herr-Voss StamcoPraxair Surface Technologies Properzi International, Inc.

Sawing Machines and Cutting Tools

ACI-CanefcoAdvanced Machine & EngineeringB&O Saws, Inc.Otto Junker GmbHAugust Mössner GmbH + Co. KGSermas IndustrieSMS Siemag LLCStarcut SRL

Scrap MeltingACI-CanefcoContinuus-Properzi S.P.A.Furnace Engineering Pty. Ltd.Gautschi Engineering GmbHGillespie & Powers, Inc.Hertwich EngineeringInductotherm Corp.Otto Junker GmbHLOI Thermprocess GmbHMajor Furnace Australia Mechatherm International Ltd.Molten Metal Equipment Innovations Nederman FiltrationProperzi International, Inc. Pyrotek Inc.Quality ConsultantsThe Schaefer Group, Inc. Sistem Teknik Ltd. STI Thermserve LimitedThorpe Technologies Inc.VIG Makina San Tic. Ltd. Sti.Wahl Refractory Systems

Scrap Preparation EquipmentButech BlissLogemann Brothers CompanyPyrotek Inc.Siemens

Separating MachinesAchenbach Buschhuetten GmbH

FATA Hunter, Division of FATA S.p.A.Kampf Machinery CorporationKampf Schneid- und Wickeltechnik

Shape Control SystemsABB Force MeasurementAchenbach Buschhuetten GmbH Butech BlissCNPTDanieli & Co. SpAFATA Hunter, Division of FATA S.p.A.Hatch-IASGeorge Kelk CorporationLechler, Inc.SiemensSMS Siemag LLC

Simulation/Modeling/SoftwareDanieli & Co. SpAHatch-IASInnoval TechnologyOtto Junker GmbHStines Equipment Company

Slitting LinesAchenbach Buschhuetten GmbH Butech BlissBWG Machinery CorporationCNPTDanieli & Co. SpAHerr-Voss StamcoKampf Machinery CorporationKampf Schneid- und WickeltechnikSermas IndustrieSMS Siemag LLC

Soaking PitsACI-CanefcoConsolidated Engineering CompanyEbner Furnaces, Inc. Gillespie & Powers, Inc.Otto Junker GmbHMechatherm International Ltd.SECO/Warwick

Spectrographic EquipmentACI-CanefcoAcme Machine Works, Inc.USArc Spark Inc.

Spray Cooling/Heating SystemsAchenbach Buschhuetten GmbH ACI-CanefcoAMCOL CorporationBWG Machinery CorporationDanieli & Co. SpAHastec Engineering/ Hastec RebsLechler, Inc.SiemensSMS Siemag LLCStines Equipment CompanyUnited States Controls, Inc.

Surface TreatmentCNPTGeneral MagnaplateOtto Junker GmbHPraxair Surface Technologies

Technical/Engineering ServicesButech BlissBWG Machinery Corporation

CNPTContinuus-Properzi S.P.A.Daifuku WebbDanieli & Co. SpAFATA Hunter, Division of FATA S.p.A.Furnace Engineering Pty. Ltd.Gautschi Engineering GmbHGillespie & Powers, Inc.Hatch-IASHerkules North America Corp. Innoval TechnologyOtto Junker GmbHLechler, Inc.Major Furnace Australia Novelis PAEPenta Engineering, P.A.Permatech Inc. Bruno Presezzi SpAProperzi International, Inc. Pyrotek Inc.Quality ConsultantsScottish Chemical Industry Selee CorporationSenTek CorporationSiemensSMS Siemag LLCStines Equipment Company

Temperature MeasurementABB Force MeasurementAccurate Sensors Technologies Ltd.Gillespie & Powers, Inc.Otto Junker GmbHPyrotek Inc.Williamson Corporation

Used Equipment (Primary Business)

Machinery International Corp.Phipps CompanyReed Machinery Ltd.

VentilationBusch InternationalPittek Division, Swindell Dressler

List Your Company in Our Next

Flat Rolled Directory

To find out how to get your com-pany listed in the next Directory of Flat Rolled Aluminum Equipment Manufacturers & Suppliers, email Light Metal Age at lma@lightmetal age.com, fax us at 650-588-0901, or call 650-588-8832 with your name and company contact information.

To learn more, visit us at:www.lightmetalage.com

Alphabetical List of Companies


ABB Analytical Measurement585 Charest Blvd. East, Suite 300Quebec, QC, G1K 9H4, CanadaTel: (418) 877-2944email: [email protected]: www.abb.com/analyticalContact: Daniel Gagnon

ABB 585 Charest Blvd. East, Suite 300Quebec, QC, G1K 9H4, CanadaTel: (418) 877-2944email: [email protected]: www.abb.com/analyticalContact: Daniel Gagnon

ABB Force Measurement 24 Commerce Dr.Danbury, CT 06810Tel: (203) 790-8588email: forcemeasurement@ us.abb.com

web: http://new.abb.com/products/measurement-products

Contact: Steve Reichert

ABB Inc., Metallurgy Products90 Consumers DriveWhitby, ON, L1N 7L3, CanadaTel: (905) 666-2251 x227email: david.a.domanski@

ca.abb.comweb: www.abb.com/metalsContact: David Domanski

Abtex Corporation89 Main St.Dresden, NY 14441Tel: (315) 536-7403email: [email protected]: www.abtex.comContact: Larry Johnson

Accurate Sensors Technologies Ltd.Misgav Industrial ParkMisgav 2017400, IsraelTel: (972) 4 9990025email: [email protected]: www.accuratesensors.comContact: Ofer Yoely

Achenbach Buschhuetten GmbHSiegener Strasse 15257223 Kreuztal, GermanyTel: (49) 2732 7990email: [email protected]: www.achenbach.deContact: Sales Department

ACI-Canefco488 Basaltic RoadConcord, ON, L4K 5A2, CanadaTel: (905) 417-4771email: [email protected]: www.acicanefco.comContact: Helgar Bergmann

Acme Machine Works, Inc.N. 1220 Bradley Rd.Spokane, WA 99212Tel: (509) 927-9066email: [email protected]: www.acmemachineworks.comContact: Don McManus

Adex B.V.Tjalkkade 2NL-5928 PZ VenloThe NetherlandsTel: (31) 77 389 8900email: [email protected]: www.adex-dies.comContact: Louis Coopmans

Advanced Dynamics 1700 Marie Victorin Blvd. St. Bruno, QC, J3V 6B9, CanadaTel: (450) 653-7220email: [email protected]: www.advanceddynamics.comContact: Kevin Williams

Advanced Machine & Engineering Co.

2500 Latham St.Rockford, IL 61103Tel: (815) 962-6076email: [email protected]: www.ame.comContact: Steve Swanson

Adwest Technologies, Inc., CECO Environmental

151 Trapping Brook Rd. Wellsville, NY 14895Tel: (585) 593-1405email: [email protected]: www.adwestusa.comContact: Brian Cannon

Air Liquide 5220 South East Ave.Countryside, IL 60525Tel: (708) 846-4995email: [email protected]: www.airliquide.comContact: Stewart Jepson

Air Liquide Industrial U.S. LP2700 Post Oak Blvd.Houston, TX 77056Tel: (713) 402-2153email: cassandra.franceschini@ airliquide.com

web: www.us.airliquide.comContact: Cassandra Franceschini

Air Products and Chemicals, Inc. 7201 Hamilton Blvd.Allentown, PA 18195Tel: (800) 654-4567, code 534email: [email protected]: www.airproducts.com/

nonferrousContact: Marie Kistler

Alliance Machine and Engraving, LLC12102 Washington HighwayAshland, VA 23221Tel: (804) 798-1199email: bfoster@alliancemachine andengraving.com

web: www.alliancemachine andengraving.com

Contact: F. Bradley Foster

Albarrie Canada Limited85 Morrow Rd.Barrie, ON, L4N 3V7, CanadaTel: (866) 269-8275email: [email protected]: www.albarrieextrusion.comContact: Neil Chappell

Alexin LLC1390 South Adams St.Bluffton, IN 46714Tel: (260) 353-3100email: [email protected]: www.alexinllc.comContact: Paul Morris

Alken21 Meadow ViewHolmewood, Derbyshire S42 5UL, U.K.Tel: (44) 1246 854 945email: [email protected]: www.alken.tvContact: Andrew Hall

Almex USA, Inc. 6925 Aragon Circle, Unit 10Buena Park, CA 90620Tel: (714) 739-0303email: [email protected]: www.almexusa.comContact: Kedar Tilak

Altek, LLC748 Springdale Drive, Ste 100Exton, PA, 19341Tel: (484) 713-0070email: [email protected]: www.altek-al.comContact: James Herbert

Alumat & Almax Mori Via Matteotti 13Mori, TN, 38065 ItalyTel: (39) 464 916600email: [email protected]: www.almax-mori.itContact: Tommaso Pinter



Aluminicaste FundiciónMontes Urales No. 88Parque Industrial OpciónSan Jose, Iturbide, GTO 37980MexicoTel: (812) 483-3064email: neil.johnson@ aluminicaste.com

web: www.aluminicaste.comContact: Neil Johnson

Aluminum Casting Technologies (ACT) LLC

7 Lone Cedar WayOld Tappan, NJ 07675 Tel: (201) 767-9044email: [email protected]: John Griffin

Aluminium Consulting Engineers, LLC

331 W. 37th St. Spokane, WA 99203Tel: (509) 838-9812email: [email protected]: www.alconsults.comContact: S. Prangenberg

The Aluminum Association1525 Wilson Blvd., Suite 600Arlington, VA 22209Tel: (703) 358-2960email: [email protected]: www.aluminum.orgContact: Matt Meenan

Amcol Corporation21435 DequindreHazel Park, MI 48030Tel: (248) 414-5700email: michelle.vaughn@

amcolcorp.comweb: www.amcolcorp.comContact: Michelle Vaughn

Amega Industries29 F.R.J. Dr. Longview, TX 75602Tel: (903) 753-7203email: [email protected]: www.amegaind.comContact: Jerry Rawlinson

AMG Aluminum North America, LLC435 Devon Park Dr., Bldg. 300Wayne, PA 19087Tel: (800) 523-8457email: [email protected]: www.amg-al.comContact: Mary Barone

Anodizing Technologies, Inc. PO Box 502770Indianapolis, IN 46250Tel: (317) 253-5725email: larry@anodizing

technologies.comweb: www.anodizingtechnologies.comContact: Larry Chesterfield

Apogee Technology, Inc. 1600 Hulton Rd.Verona, PA 15147Tel: (412) 795-8782email: [email protected]: www.apogee-technology.comContact: Scott Stauffer

Atherm SAS1 Rue Charles MorelDomène, 38420, FranceTel: (33) 4 76 77 23 24email: [email protected]: www.atherm.comContact: Darie Payerne

Azon643 West Crosstown ParkwayKalamazoo, MI 49008-1910Tel: (269) 385-5942web: www.azonintl.comContact: Sales

B&P Process Equipment and Systems, LLC

1000 Hess Ave.Saginaw, MI 48601Tel: (989) 757-1300email: [email protected]: www.bpprocess.comContact: Michael F. Lazorchak IV

Badia & Associates LLCPO Box 6171Gulfport, MS 39506Tel: (228) 896-3643email: [email protected]: Hector Badia

BC Salvage235 Appollo Beach Blvd. #516Apollo Beach, FL 33572Tel: (813) 641-1615email: [email protected]: Sales

Belco Industries, Inc.9138 W. Belding Rd. Belding, MI 48809Tel: (616) 794-0410email: [email protected]: www.belcoind.comContact: Calvin L. Wilson

Belmont Metals Inc.330 Belmont Ave.Brooklyn, NY 11207Tel: (718) 342-4900email: [email protected]: www.belmontmetals.comContact: Herb Doyle

R.L. Best Company723 Bev RoadBoardman, OH 44512Tel: (330) 758-8601email: [email protected]: www.rlbest.comContact: Bill Kavanaugh

Beuth Verlag GmbHBurggrafen Strasse 610787 Berlin, GermanyTel: (49) 30-2601-2129email: [email protected]: www.beuth.deContact: Margaret Saunders

Bloom Engineering5460 Horning RoadPittsburgh, PA 15236Tel: (412) 653-3500email: [email protected]: www.bloomeng.comContact: Jim Checkeye

BMP11625 Maple Ridge Rd.Medina, NY 14103Tel: (203) 231-3878email: [email protected]: www.bmpworldwide.comContact: Vin Forleo

B&O Saws, Inc.825 Reed St.Belding, MI 48809Tel: (616) 794-7297email: [email protected]: www.bosaws.comContact: Jason M. Kohn

Bohler-Uddeholm Corporation2505 Millennium DriveElgin, IL 60124Tel: (630) 883-3000email: [email protected]: www.bucorp.comContact: Susan Voss

Bonnell Aluminum25 Bonnell St.Newnan, GA 30264Tel: (770) 252-7243email: [email protected]: www.bonlalum.comContact: Andy Massey

Bosch Rexroth Corporation14001 South Lakes DriveCharlotte, NC 28273Tel: (800) 739-7684email: [email protected]: www.boschrexroth-us.com/

brh-iContact: Aaron Weida



Bradley Lifting Corp. 1030 Elm St.York, PA 17403Tel: (717) 848-3121email: dino.petrucci@bradley

lifting.comweb: www.bradleylifting.comContact: Dino Petrucci

B.S. Metallurgy, Inc. 1601 Madison StreetManitowoc, WI 54220Tel: (920) 686-6000email: [email protected]: www.bsmetallurgy.comContact: Rob Bailey

Busch International10431 Perry HighwayWexford, PA 15090Tel: (724) 940-2326email: [email protected]: www.buschintl.comContact: William W. Frank

Buss ChemTech AGHohenrainstrasse 12aCH-4133 Pratteln 1, SwitzerlandTel: (41) 61 825 6462email: [email protected]: www.buss-ct.comContact: Daniel Haeusler

Butech Bliss550 South Ellsworth Ave.Salem, OH 44460Tel: (330) 337-0000email: [email protected]: www.butechbliss.comContact: Lisa Liposchak

BWG Machinery Corporation111 Haven RidgePeachtree City, GA 30269Tel: (770) 969-9199email: joe.heiman@

bwgmachinery.comweb: www.bwgmachinery.comContact: Joe Heiman

Calderys19, Place de la RésistanceF-92446 Issy-les-MoulineauxFranceTel: (33) 1 41 1108 00email: [email protected]: www.calderys.comContact: Norm Phelps

Can-Eng Furnaces International Ltd.6800 Montrose RoadNiagara Falls, ON, L2E 6V5, Canada Tel: (905) 356-1327email: [email protected]: www.can-eng.comContact: Tim Donofrio

Castal EngineeringHippocrates 1814563 Kifisia, GreeceTel: (30) 210 807 3088email: [email protected]: www.castal.grContact: F. Samaropoulos

Castool Tooling Systems2 Parratt RoadUxbridge, ON, L9P 1R1, CanadaTel: (905) 852-0121email: [email protected]: www.castool.comContact: Heidi VonVulte

CCPI Inc. – North America838 Cherry StreetBlanchester, OH 45107Tel: (937) 783-2476email: [email protected]: www.ccpi-inc.comContact: Mike Brausch

Central Extrusion Die 336 Washington Ave.Muscle Shoals, AL 35661Tel: (256) 381-8262email: [email protected] web: www.ckbent.com Contact: Gary Cockburn

A. Cesana S.r.l.Via Turati 2320016 Pero, Milan, ItalyTel: (39) 02 3534941email: [email protected]: www.acesana.comContact: Alberto Cesana

Chinook Sciences LLC20 Commerce Dr., Suite 326Cranford, NJ 07016Tel: (908) 272-5091email: contact@chinook

sciences.comweb: www.chinooksciences.comContact: Harry Perry

CJI Systems, Inc.5721 S. Pinebrook Ct.Spokane, WA 99206Tel: (509) 926-4800email: craig.johnson@

cjisystems.comweb: www.cjisystems.comContact: Craig Johnson

CMI Novacast Inc.500 East Touhy Ave., Unit BDes Plaines, IL 60018Tel: (847) 699-9020email: [email protected]: www.cminovacast.comContact: Art Gabe

C.M. Surface Treatment, S.p.A.Via Della Tecnica 50Modena, 41122 ItalyTel: (39) 059 281652email: andrea.bacchelli@ cmspa.com

web: www.cmspa.comContact: Andrea Bacchelli

CNPT - China Nonferrous Metals Processing Technology Co., Ltd.

No. 1 Xiyuan RoadLuoyang City, Henan, 471039ChinaTel: (86) 379-648-72421email: [email protected]: www.cnpt.com.cnContact: Han Zhengying

COGNEX Corp.One Vision Dr.Natick, MA 01760Tel: (508) 650-4141email: [email protected]: www.cognex.comContact: Sales Department

COIM srlVia del Donatore 5Castelcovati (BS) 25032, ItalyTel: (39) 030 718 473email: [email protected]: www.coimsrl.netContact: Giancarlo Barbieri

Colt International BVKorte Oijen 45433 NE Katwijk, The NetherlandsTel: (31) 485 399922email: niek.menting@

nl.coltgroup.comweb: www.coltsmelters.comContact: Niek A. Menting

Combilift USA303 Concord St. Greensboro, NC 27406Tel: (336) 378-8884email: gearoid.hogan@ combilift.com

web: www.combilift.comContact: Gearoid Hogan

Compes International45A Armthorpe Rd.Brampton, ON, L6T 5M4, CanadaTel: (905) 458-5994email: [email protected]: www.compes.caContact: Sal Adamo



Compes S.P.A.Via Castegnato 6/C25050 Rodengo Saiano (BS), ItalyTel: (39) 030 681 5011email: [email protected]: www.compes.comContact: Vincenzo Giacomelli

Confex Technology Ltd.28 Glenmore Business ParkHolton Heath, PooleDorset, BH16 6NL, U.K.Tel: (44) 12 0288 1466email: [email protected]: www.confexuk.comContact: David Godwin

Consolidated Ceramic Products Inc. (CCPI)

838 Cherry St.Blanchester, OH 45107Tel: (937) 783-2476email: [email protected]: www.ccpi-inc.comContact: Kari Dixon

Consolidated Engineering Company1971 McCollum Pkwy NWKennesaw, GA 30144Tel: (770) 422-5100email: [email protected]: www.cec-intl.comContact: Paul M. Crafton

Continuus-Properzi S.P.A.Via Cosimo Del Fante 1020122 Milan, ItalyTel: (39) 02 988492-1email: [email protected]: www.properzi.comContact: Carmelo M. Brocato

Consulting Collaborative3609 Potomac AveDallas, TX 75205Tel: (443) 994-7096email: lfbrown@

consulting-collaborative.comweb: www.consulting-collaborative.comContact: Lynn Brown

Cunningham Machine Design506 Olde Ingomar CourtPittsburg, PA 15237Tel: (412) 735-2916email: [email protected]: www.cmachinedesign.comContact: James Cunningham

Daifuku Webb 34375 West 12 Mile Rd.Farmington Hills, MI 48331Tel: (248) 553-1223email: [email protected]: www.daifukuwebb.comContact: Marcio D. Soares

Danieli & C. SpAVia Nazionale 41Buttrio (UD) 33042, ItalyTel: (39) 0432 1958 111email: [email protected]: www.danieli.comContact: Sales

Danieli Corporation600 Cranberry Woods Drive, #200Cranberry Township, PA 16065Tel: (724) 778-5448email: [email protected]: www.danielicorp.comContact: Robert Smith

Die Cleaning Equipment & Supply, Inc.

1411 E. Hadley StreetPhoenix, AZ 85034Tel: (888) 728-1115email: sales@

diecleaningequipment.comweb: www.diecleaningequipment.comContact: Steve Smith

Dienamex755 de la SabliereBois des Filion, QC J6Z 4T2CanadaTel: (450) 621-0070 x227email: [email protected]: www.dienamex.comContact: Giuseppe Olcelli

Die-Tech Inc.4504 Helton DriveFlorence, AL 35630Tel: (256) 764-7077email: [email protected]: Danny Blevins

Dry-Lube Intl. Inc. 21710 Moortown Cir.Katy, TX 77450Tel: (713) 419-1498email: [email protected]: www.dry-lube.comContact: Robert Tilley

Dubai Aluminium (DUBAL)PO Box 3627Dubai, UAETel: (+971) 4884 6666email: [email protected]: www.dubal.aeContact: Sales

Dunaway Inc.5959 Leffingwell Rd.Canfield, OH 44406Tel: (330) 533-7753email: [email protected]: www.dunawayinc.comContact: Michael Dunaway

Ebner Furnaces, Inc.224 Quadral Dr. Wadsworth, OH 44281Tel: (330) 335-1600email: [email protected]: www.ebner.ccContact: Herbert Gabriel

Ebner IndustrieofenbauEbner-Platz 1A-4060 Leonding, AustriaTel: (43) 70 6868email: [email protected]: www.ebner.ccContact: Harald Tippe

ECL100 Rue ChalantRonchin 59790, FranceTel: (33) 320 88 7070email: [email protected]: www.ecl.frContact: Sales

Alfin-Edimet SPAVia Castegnato 825050 Rodengo Saiano (BS) ItalyTel: (39) 030 9981045email: [email protected]: www.aluplanet.comContact: Nancy Ghandour

EFR213 rue de Gerland“Les jardins d’entreprise” Bât F269007 Lyon, FranceTel: (33) 4 78 58 27 55email: [email protected]: www.fours-efr.comContact: Eric Edel

Elite Extrusion Die Ltd.7510 Hurricane RoadGloucester Business ParkGloucestershire, GL3 4AQ, U.K.Tel: (44) 1 452 618 900email: [email protected]: www.elitedie.euContact: Stephen Rogers

Emirates Aluminium (EMAL)PO Box 111023Abu Dhabi, United Arab EmiratesTel: (+971) 2 509 2222email: [email protected]: www.emal.aeContact: Sales Dept.

Emmebi srlVia Della Tecnologia 12Pavia Di Udine, UD, 33050 ItalyTel: (39) 0432 675936email: [email protected]: www.emmebi.netContact: Elena Mauro



EMV Technology LLC12 Ramsgate Ct.Blue Bell, PA 19422Tel: (610) 751-6947email: [email protected]: Wojtek Misiolek

Erie Press Systems1253 West 12th St., PO Box 4061Erie, PA 16512-4061Tel: (814) 455-3941 x620email: [email protected]: www.eriepress.comContact: George M. Currie

ETS – Exco Canada130 Spy CourtMarkham, ON, L3R 5H6, CanadaTel: (905) 477-1208email: [email protected]: www.etsdies.comContact: Nick Gnatyuk

ETS – Exco ColombiaZona Franca De RionegroVerda Chachafruto, Unidad #190 + #212Medellin, Colombia S.A.Tel: (57) 4 562-8755email: [email protected]: www.etsdies.comContact: Matthew Robbins

ETS – Exco Michigan55617 North Bay Dr.Chesterfield, MI 48051Tel: (586) 749-5400email: [email protected]: www.etsdies.comContact: David Mrdjenovic

ETS – Exco Texas400 S. Hwy 78Wylie, TX 75098Tel: (972) 442-3131email: [email protected]: www.etsdies.comContact: Jeff Weitenberner

Excellent Foundry Fluxes Company12-B Pkt A-13 Kalkajee ExtnNew Delhi 110019, IndiaTel: (91) 11 299 83327email: [email protected]: V.P. Sharma

Extral TechnologyVia Repubblica n.4724060 Castelli Calepio (BG), ItalyTel: (330) 506-9291email: [email protected]: www.extraltechnology.itContact: Tom Nentwick

Extrusion Press Services UK Ltd.30/32 Smithybridge Rd.Littleborough, OL15 8QF, U.K.

Tel: (44) 1706 374021email: [email protected]: Joe Stott

ExtrusionSupplies7009 Southberry HillCanfield, OH 44406Tel: (330) 506-9291email: [email protected]: www.extrusionsupplies.comContact: Tom Nentwick

FATA Hunter, Div. of FATA SPAStrada Statale 24, Km. 12Pianezza, Torino, 10044, ItalyTel: (39) 011 9668-1email: [email protected]: www.fatahunter.comContact: Sales Department

Fitch Metals Engineering108 Penshurst Street, Suite 4Willoughby, NSW, 2068, AustraliaTel: (61) 2 9967 0158email: [email protected]: www.fitchmetalseng.comContact: Mike Fitch

Fives North American Combustion, Inc.

4455 E. 71st StreetCleveland, OH 44105Tel: (216) 271-6000email: [email protected]: www.fivesgroup.comContact: Clive Lucas

FomUSA1065 Medina Rd., Suite 800Medina, OH 44256Tel: (234) 248-4400email: [email protected]: www.fomgroupusa.comContact: Daniel Bonafini

Foy Inc.111 Farmersville Pkwy, Ste 100Farmersville, TX 75442Tel: (972) 782-7282email: [email protected]: www.foyinc.comContact: Jim Foy

Friggi N.A. Inc. 883 Isabel St. WoodStock, ON, N4S 2A7, CanadaTel: (519) 421-9291email: [email protected]: www.friggiamerica.comContact: Ben Fuschino

Furnace Engineering50 Howleys Road Notting Hill, VIC, 3168, AustraliaTel: (61) 3 9544 2922email: [email protected]

web: www.furnace.com.auContact: Peter Newman

Gautschi Engineering GmbHKonstanzerstrasse 37 8274 Taegerwilen, SwitzerlandTel: (41) 71 666 66 66email: [email protected]: www.gautschi.ccContact: Stefan Blum

General Magnaplate1331 West Edgar Rd. Linden, NJ 07036Tel: (908) 862-6200email: [email protected]: www.magnaplate.comContact: Wayne Cromwell

Gerref Industries Inc.206 York St.Belding, MI 48809Tel: (616) 794-3110email: [email protected]: www.gerref.comContact: Ray Palmitier

GES – Graphite Electrode Sales Company

5628 Clifford CircleBirmingham, AL 35210Tel: (866) 472-1861email: [email protected]: www.geselectrodes.comContact: Hunter Kearney

GES Graphite 5628 Clifford CircleBirmingham, AL 35210Tel: (866) 472-1861email: [email protected]: www.gesgraphite.comContact: Hunter Kearney

GHI Hornos Industriales S.L.Aperribay, 4Galdakao 48960, Bizkaia, SpainTel: (34) 9444 91600email: [email protected]: www.ghihornos.comContact: Jose D. Berasategui

GIA ClecimPol. Industrial Campollano Calle. C No. 2402007 Albacete, SpainTel: (34) 967 522 523email: [email protected]: www.giaet.comContact: Roberto Clemente



Gillespie & Powers, Inc.9550 True Dr.Saint Louis, MO 63132Tel: (314) 423-9460email: [email protected]: www.gillespiepowers.comContact: John Peterman

GLAMA Maschinenbau GmbHHornstrasse 1945964 Gladbeck, GermanyTel: (49) 2043 9738-0email: [email protected]: www.glama.deContact: Werner Nowitzki

GNA alutech inc.9495 Trans-Canada Hwy Saint-Laurent, QC, H4S 1V3CanadaTel: (514) 956-1776email: [email protected]: www.gna.caContact: Ted Phenix

Gouda Refractories Goudkade 11-162800 AB Gouda, The NetherlandsTel: (31) 182 591 463email: frank.constantinesco@

goudarefractories.comweb: www.goudarefractories.comContact: Frank Constantinesco

Gramm Technik GmbHEinsteinstr. 471254 Ditzingen, GermanyTel: (49) 7152 5009-0email: [email protected]: www.gramm-technik.deContact: K. Schiffner

Granutech – Saturn Systems201 East Shady Grove Rd.Grand Prairie, TX 75050Tel: (972) 790-7800email: [email protected]: www.granutech.comContact: Matt Morrison

Granco Clark, Inc.7298 Storey Rd.Belding, MI 48809Tel: (616) 794-2600email: michael.werner@granco-

clark.comweb: www.grancoclark.comContact: Michael Werner

The Gund Company, Inc.2121 Walton RoadSaint Louis, MO 63114Tel: (314) 423-5200email: [email protected]: www.thegundcompany.comContact: Jeff Irwin

Guyson Corporation13 Grande Blvd.Saratoga Springs, NY 12866-9090Tel: (800) 228-7894email: [email protected]: www.guyson.comContact: John C. Carson

Handtmann CNC Technologies, Inc. 205 Prairie Lake Rd., Unit BEast Dundee, IL 60118Tel: (847) 844-3300email: [email protected]: www.handtmanncnc.comContact: Douglas Gale

Hastec Engineering/ Hastec Rebs Inc.8-45 Hannover DriveSt. Catharines, ON, L2W 1A3,

CanadaTel: (905) 687-9194email: [email protected]: www.hastec.comContact: Tim Fawcett

Hatch2800 Speakman Dr.Sheridan Science & Technology ParkMississauga, ON, L5K 2R7CanadaTel: (905) 855-7600email: [email protected]: www.hatch.caContact: Tom Reid

Hatch-IAS7000 Industrial Blvd. Aliquippa, PA 15001Tel: (724) 375-5500 email: [email protected]: www.hatch.caContact: Nigel Blackmore - Rolling

Hauck Manufacturing Co./ Kromschröder Controls

PO Box 90Lebanon, PA 17042Tel: (717) 272-3051email: rcarpenter@ hauckburner.com

web: www.hauckburner.comContact: Rick Carpenter

Hazelett Strip-Casting135 W. Lakeshore Dr.Colchester, VT 05446`Tel: (802) 863-6376email: [email protected]: www.hazelett.comContact: Wojtek Szczypiorski

HCT Ltd.Bretton Street, Savile TownDewsbury, WYK, WF12 9DB, UKTel: (44) 1924 506 506email: [email protected]

web: www.hotworkct.comContact: Denis Hunzinger

HenconDe Stenenmaat 157071 ED Ulft, The NetherlandsTel: (31) 315-683941email: [email protected]: www.hencon.comContact: Gerrit Hiddink

Herkules North America Corp. 101 River StreetFord City, PA 16226Tel: (724) 763-9050email: [email protected]: www.herkules-group.comContact: Larry Hiller

Herr-Voss Stamco130 Main St.Callery, PA 16024Tel: (724) 538-3180email: [email protected]: www.herr-voss.comContact: Greg Santillo

Hertwich Engineering GmbHWeinbergerstr. 65280 Braunau, AustriaTel: (43) 7722 806-0email: [email protected]: www.hertwich.comContact: Sales

Hindalco-Almex Aerospace Limited3rd Flr., Century Bhavan, Dr. Annie Besant Road, WorliMumbai 400030, MaharashtraIndiaTel: (91) 22-6662 6666email: gracewil.dsouza@adityabirla.

comweb: www.hindalcoalmex.comContact: Gracewil D’Souza

HMR Group ASPrestnesvegen 535460, Husnes, NorwayTel: (47) 53482100email: [email protected]: www.hmr.noContact: Anna Prestnes

Roy Hollis88/52 Palm PavilionSoi Nawin, Bangkok, 10120Thailand Tel: (66) 2671 0721email: [email protected]: Roy Hollis



Holton Crest Ltd. 10 Cowley RoadNuffield Industrial EstatePoole, Dorest, BH17 0UJ, UKTel: (44) 1202 681501email: malcolm.ladd@ holtoncrest.com

web: www.holtoncrest.comContact: Malcolm Ladd

HPI GmbHSchloss Strasse 325282 Ranshofen, AustriaTel: (43) 7722 68420email: [email protected]: www.hpi.atContact: R. Edtmeier

HycastIndustriveien 49Sunndalsora, N-6600, NorwayTel: (47) 716 93 800email: [email protected]: www.hycast.noContact: Einar Smarason

Hydro Aluminum Metals USA, LLC1500 Whetstone Way, Ste. 103Baltimore, MD 21230Tel: (443) 835-3133email: [email protected]: www.hydro.comContact: Roxane Bender

IAS GmbHAm Grossen Teich 2758640 Iserlohn, GermanyTel: (49) 2371-43460email: [email protected]: www.ias-induction.comContact: Gerhard Kleinert

Ichikawa North America11097 Houze Rd., Suite 200Roswell, GA 30076Tel: (330) 506-9291email: [email protected]: www.ik-felt.co.jpContact: Tom Nentwick

IMPEC ASÅrdalsvegen 56884, Øvre Årdal, NorwayTel: (47) 57 66 57 50email: [email protected]: www.impec.noContact: Ståle Øvstetun

Inductotherm Corp.10 Indel Ave.Rancocas, NJ 08073Tel: (609) 267-9000email: [email protected]: www.inductotherm.comContact: Joseph T. Belsh

Industrial Maintenance Group B.V.Voltaweg 64338 PS MiddelburgThe NetherlandsTel: (31) 113 616 550email: [email protected]: www.im-professionals.comContact: Rene Harinck

Infa S.A.Ruta n° 4 s/nPuerto Madryn, Chubut, ArgentinaTel: (54) 2965 451342 x6500email: [email protected]: www.infa.com.arContact: Luis Azcona

Herr-Voss Stamco130 Main St.Callery, PA 16024Tel: (724) 538-3180email: [email protected]: www.herr-voss.comContact: Greg Santillo

Innoval Technology Ltd.Beaumont CloseBanbury, Oxon, OX16 1TQ, U.K.Tel: (44) 1295 702800email: [email protected]: www.innovaltec.comContact: Helen Forrest

InnovathermAm Hetgesborn 2035510 Butzbach, GermanyTel: (49) 6033 96960email: [email protected]: www.innovatherm.comContact: Domenico Di Lisa

InnovathermAm Hetgesborn 2035510 Butzbach, GermanyTel: (49) 2841 881360email: [email protected]: www.innovatherm.comContact: Detlef Maiwald - Secondary

iNOEX LLC1861 Charter LaneLancaster, PA 17601Tel: (717) 672-0870email: [email protected]: www.inoex.comContact: Brad Allen

Italtecno SRLVia Gino Marinuzzi 3841122 Modena, ItalyTel: (39) 059 280362email: walter.dallabarba@ italtecno.com

web: www.italtecno.comContact: Walter Dalla Barba

Jinli Machinery Manufacture Co. Ltd. Henggang Industrial AreaDali Town, Nanhai DistrictFoshan CityGuangdong Province, 528231ChinaTel: (86) 757 8552 9700email: [email protected]: www.jinlipress.comContact: Ken Ho

JMC Recycling Systems Ltd. 2 Harrimans LaneDunkirk, Nottingham, NG7 25D,

U.K.Tel: (44) 115 940 9630email: [email protected]: www.jmcrecycling.comContact: Sally Torenson

Otto Junker GmbHJaegerhausstrasse 2252152 Simmerath, GermanyTel: (49) 2473 6010email: [email protected]: www.otto-junker.deContact: Sales Department

Kabert Industries Inc.P.O. Box 6270Villa Park, IL 60181Tel: (630) 833-2115email: [email protected]: www.kabert.comContact: Karl Hartman

Kampf Machinery Corporation900 River StWindsor, CT 06095Tel: (860) 640-0040email: michael.schubert@

kampfusa.comweb: www.kampfusa.comContact: Michael Schubert

Kampf Schneid- und Wickeltechnik GmbH & Co. KG

Mühlener Strasse 36-4251674 Wiehl, GermanyTel: (49) 2262 81 0email: [email protected]: www.kampf.deContact: Michael Strathmann

George Kelk Corporation48 Lesmill RoadToronto, ON, M3B 2T5, CanadaTel: (416) 445-5850email: [email protected]: www.kelk.comContact: Sales



Kempe Engineering50 Gheringhap St.Geelong, Victoria, 3220, AustraliaTel: (61) 3 5225 2900email: [email protected]: www.kempe.com.auContact: Tony Hudson

Kennedy Eurotech Inc.4 Oak PointNewnan, GA 30263Tel: (770) 304-1000email: [email protected]: www.alkennedy.comContact: Al Kennedy

Kind & Co., Edelstahlwerk KGBielsteiner Str. 124-13051674 Wiehl-Bielstein, GermanyTel: (49) 226 2184-0email: [email protected]: www.kind-co.deContact: Werner Hähnel

Kipco International Inc.PO Box 187Auburndale, FL 33823Tel: (863) 299-0040email: [email protected]: www.kipcointl.comContact: Kip Cole

KRAHE InfoSystems, Inc.PO Box 254Rockford, MI 49341-0254Tel: (888) 572-4347email: [email protected]: www.krahe-is.comContact: Kevin Rahe

Kredit Automation & Controls8711 E. Pinnacle Peak Rd. #209Scottsdale, AZ 85255Tel: (602) 454-7244email: dale.k@kredit

automation.comweb: www.kreditautomation.comContact: Dale Kredit

Lake Park Tool & Machine, Inc. 1221 Velma Ct. Youngstown, OH 44512Tel: (330) 788-2437email: [email protected]: www.lakepark.comContact: Dave Cornelius/Oscar Lund

Lechler, Inc.445 Kautz Rd.St. Charles, IL 60174Tel: (800) 777-2926email: [email protected]: www.lechlerusa.comContact: Diana Lent

Linde575 Mountain Ave.Murray Hill, NJ 07748Tel: (908) 771-1215email: [email protected]: www.linde.comContact: Tony Palermo

LMI Technologies1673 Cliveden Ave.Delta, BC, V3M 6V5, CanadaTel: (604) 636-1011email: [email protected]: www.lmitechnologies.comContact: Kevin Brown

Logemann Brothers Company3150 West Burleigh StreetMilwaukee, WI 53210-1999Tel: (414) 445-3005web: www.logemannbalers.comContact: Bob Plichta

LOI Thermprocess GmbHAm Lichtbogen 2945141 Essen, Germany Tel: (49) 201 18911email: [email protected]: www.tenova.comContact: Andrea Kehry

Machinery International Corp.20 Commerce DriveNorth Branford, CT 06471Tel: (203) 484-0400email: [email protected]: www.machyintl.comContact: Steve McMillan

Mansell and Associates551 Spring Valley Rd.Tuscumbia, AL 35674Tel: (256) 366-9325email: emansell@mansell

andassociates.netweb: www.mansellandassociates.netContact: Ed Mansell

Major Furnace Australia 92 Fairbank Rd.Clayton South, VIC, 3169Australia Tel: (61) 3 8558 1800email: [email protected]: www.majoreng.com.auContact: Andrew North

Marathon Belting Ltd.Healey Mill, Whitworth Rd.Rochdale, Lancashire OL12 0TFUKTel: (44) 1706 657052email: darren.payne@

marathonbelting.co.ukweb: www.marathonbelting.co.ukContact: Darren Payne

Marx GmbH & Co. KGLilienthalstr. 6-13Iserlohn, 58638, GermanyTel: (49) 2371-2105-0email: [email protected]: www.marx-gmbh.deContact: Christian Eckenbach

Marx LLC1221 Velma Ct. Youngstown, OH 44512Tel: (330) 788-0864email: [email protected]: www.marx-us.comContact: Christian Eckenbach

Maschinenfabrik Gustav Eirich GmbH & Co. KG

Wallduerner Strasse 5074736 Hardheim, GermanyTel: (49) 6283 51615email: [email protected]: www.eirich.comContact: Berthold Hohl

M.E.A., Inc.2600 American LaneElk Grove Village, IL 60007Tel: (847) 766-9040email: [email protected]: www.meaincorporated.comContact: Jack Mueller

Mecfor Inc. 1788 Mitis StreetChicoutimi, QC, G7K 1H5, CanadaTel: (418) 543-1632email: [email protected]: www.mecfor.comContact: Yves St-Gelais

Mechatherm International LimitedHampshire House, High St.Kingswinford, WMD, DY6 8AW, UKTel: (44) 1384 279132email: [email protected]: www.mechatherm.comContact: Chris Emes

Mersen USA Greenville-MI Corp.712 Industrial Park Dr. Greenville, MI 48838Tel: (800) 472-3483email: [email protected]: www.graphite-eng.comContact: Sales

Metal 7 Inc. 285 Pionniers, PO Box 1590Sept-Iles, QC, G4R 4X9, CanadaTel: (418) 968-5822email: [email protected]: www.metal7.comContact: Alexandre Neron



MetlSaw Systems2950 Bay Vista Ct.Benicia, CA 94510Tel: (707) 746-6200email: [email protected]: www.metlsaw.comContact: Lisa Kvech

mfs ltd.Sonnenberger 4, PO Box 1437Ch-8280, Kreuzlingen, SwitzerlandTel: (41) 9 600 7329email: [email protected]: Sales Department

mfs Metallurgical Furnace Systems Ltd.

P.O. Box 1437CH-8280 Kreuzlingen, SwitzerlandTel: (41) 79 600 7329email: [email protected]: Sales - Secondary

MidSouth Extrusion Die Company334 Washington Ave.Muscle Shoals, AL 35661Tel: (256) 381-3620email: [email protected]: www.ckbent.comContact: Terry Cockburn

Mikropul/Nederman102 Transit AveThomasville, NC 27360Tel: (336) 289-2871email: [email protected]: www.nederman.comContact: David Edgerton

Molten Metal Equipment Innovations

15510 Old State Road. Middlefield, OH 44062Tel: (440) 632-9119email: [email protected]: www.mmei-inc.comContact: Sarah Mikash

August Mössner GmbH + Co. KGHohenstaufenstr. 373569 Eschach, GermanyTel: (49) 7175 99806 0email: [email protected]: www.moessner-kg.deContact: Oliver Vogt/

Franz Sachsenmaier

Murlin Chemical Inc.10 Balligomingo Rd.West Conshohocken, PA 19428Tel: (610) 825-1165email: [email protected]: www.murlinchemical.comContact: Edward Murray

Nederman LLC102 Transit AvenueThomasville, NC 27360Tel: (773) 230-9207email: david.edgerton@ nederman.com

web: www.nederman.comContact: David Edgerton

Nitrex Metal GmbHC.P. 1060CH-1701 Fribourg, SwitzerlandTel: (41) 26-493-3254email: [email protected]: www.nitrex.comContact: Andrzej Czelusniak

Nitrex Metal Inc.3474 Poirier Blvd. Montreal, QC, H4R 2J5, CanadaTel: (514) 335-7191email: [email protected]: www.nitrex.comContact: Paul Oleszkiewicz

Nordson Corporation300 Nordson DriveAmherst, OH 44001Tel: (800) 626-6303email: [email protected]: www.nordson.com/icsContact: Sue Safos

North American Construction Services Ltd.

5000 Commerce AveBirmingham, AL 35210Tel: (205) 956-8191email: [email protected]: www.fivesgroup.comContact: Matt Owens

Northern InnovationsPO Box 93171RPO Newmarket EastNewmarket, ON, L3Y 8K3, CanadaTel: (416) 850-5071email: stephen@northern

innovations.netweb: www.northerninnovations.netContact: Stephen Wasilenko

Novatec Process Systems Inc. Unit B – 19214 94th Ave.Surrey, B.C., V4N 4E6, CanadaTel: (604) 888-3328email: dbennington@ novatecpro.com

web: www.novatecpro.comContact: Dave Bennington

Novelis PAECentr’Alp – B.P. 24Voreppe 38340, FranceTel: (33) 476 57 87 00email: [email protected]

web: www.novelis.com/paeContact: Celine Reynas

N.T.K Plants Management & Business Initiating Ltd.

Shechanya, D.N. Misgav 20183, IsraelTel: (972) 4 999 8116email: [email protected]: Tuvia Kornfeld

o.d.t. Engineering Pty Ltd.521 Hammond Rd.Dandenong, VIC, 3175, AustraliaTel: (61) 3 9706 4135email: [email protected]: www.odt.com.auContact: Markus Oswald

The Oilgear Company2300 So. 51st St.Milwaukee, WI 53234Tel: (414) 327-1700email: [email protected]: www.oilgear.comContact: John Brossard

OKD Okad Dee Co. Ltd.232-232/1 MOO 13 Phetkasern Rd.Soi Phetkasern 95Oumnoi, KatumnarnSamut Sakorn 74130, ThailandTel: (66) 2-431 0414-6email: [email protected]: www.okaddee.comContact: Sales`

OMAV S.P.A.Via Stacca 2 Rodengo Saiano, Brescia, 25050ItalyTel: (39) 030 681621email: [email protected]: www.omav.comContact: Giulia Bertoli

Outotec (Canada) Ltd.1551 Corporate Dr.Burlington, ON, L7L 6M3, CanadaTel: (905) 335-0002email: [email protected]: www.outotec.comContact: Joe Grasso

PA – Profile AutomationVia Verdi 1,2,4 ACastelbelforte (MN) 46032 ItalyTel: (39) 0376 258050email: [email protected]: www.pasrl.itContact: Massimo Pezzorgna



Pamas & Company707 Eagleview Blvd., Ste 307Exton, PA 19341Tel: (610) 458-1200email: [email protected]: www.pamasinc.comContact: Anthony Mascieri

Penta Engineering, PA13835 South Lakes Dr.Charlotte, NC 28273Tel: (704) 588-8877email: [email protected]: www.pentaengr.comContact: David Stephens

Permatech Inc.911 East Elm St.Graham, NC 27253Tel: (336) 578-7728email: kiersten.fitzgerald@

permatech.netweb: www.permatech.netContact: Kiersten FitzGerald

Phipps CompanyPO Box 1164Roxboro, NC 27573Tel: (336) 597-2370email: [email protected]: www.phippsmetals.comContact: Ron/Harry Phipps

C.A. Picard Int’lHasteraue 9Remscheid 42857, GermanyTel: (49) 2191 893-178email: [email protected]: www.capicard.comContact: Joerg Hoffmann

Pittek Division, Swindell Dressler Intl. Co.

5100 Casteel Dr.Coraopolis, PA 15108Tel: (412) 760-4052email: [email protected]: www.pittek.comContact: Richard Perryman

PMC Systems Limited12155 Commissioner DriveNorth Jackson, OH 44451Tel: (330) 538-2268email: [email protected]: www.pmcsystems.comContact: Paul Graff

PPG Industries, Inc.One PPG PlacePittsburgh, PA 15272Tel: (888) 774-2001email: [email protected]: www.ppgindustrial

coatings.comContact: Sharon Bird

Praxair Surface Technologies1500 Polco St.Indianapolis, IN 46222Tel: (317) 240-2329email: [email protected]: www.praxairsurface

technologies.comContact: Michael Brennan

Precimeter Control ABÖstra Hamnen 747542, Hönö, SwedenTel: (46) 31-7645520email: [email protected]: www.precimeter.comContact: Jonatan Lindstrand

Precimeter Inc.2215 S. 48th St., Suite CTempe, AZ 85282Tel: (480) 829-1923email: [email protected]: www.precimeter.comContact: Jerry Wilkins

Bruno Presezzi SpAVia Per Ornago 8Burago Molgora (MB) 20875, ItalyTel: (39) 039 6350 2229email: gabriele.longinotti@

brunopresezzi.comweb: www.brunopresezzi.comContact: Gabriele Longinotti

Presezzi Extrusion North America

Chicago, ILTel: (847) 676-2459email: b.donada@presezziextru-

sion.comweb: www.presezziextrusion.comContact: Bruno Donada

Presezzi Extrusion SPAVia Rovereto 1/d20059 Vimercate (MB), ItalyTel: (39) 039 63501-1email: [email protected]: www.presezziextrusion.comContact: Manuela Beretta

Properzi International, Inc.909 Ridgebrook Rd., Suite 102Sparks, MD 21152Tel: (443) 212-4320email: [email protected]: www.properzi.comContact: Giuseppe Marcantoni

Protrans, LLC6633 Journeys End Pvt.Calendonia, MI 49316Tel: (616) 891-8006email: [email protected]: www.protransmhs.comContact: Jaap W. Romers

Pyrotek, Inc.9503 E. Montgomery Ave.Spokane Valley, WA 99206Tel: (509) 926-6211email: [email protected]: www.pyrotek.infoContact: Clint Whitsett

QED Extrusion Developments Inc.455 Rancho La Mirada LaneEscondido, CA 92025Tel: (760) 432-9532email: [email protected]: www.qedextrusion.comContact: Bill Dixon

Quality Consultants VOFKooikershof 6Heusden, 5256 KDThe NetherlandsTel: (31) 416 662179 email: [email protected]: www.qualityconsultants.nlContact: Frans Bijlhouwer

Reed Machinery Ltd.Breton Heights, Layer BretonColchester, CO2 0PS, U.K.Tel: (44) 1206 331767email: [email protected]: www.reedmachinery.co.ukContact: Alan Draper

REISCH Maschinenbau GmbHSonnenbergerstrasse 46820 Frastanz, AustriaTel: (43) 5522 51710email: [email protected]: www.reisch.atContact: Arno Reisch

R&D Carbon Ltd. PO Box 362Sierre, 3960, SwitzerlandTel: (41) 27 4592929email: [email protected]: www.rd-carbon.comContact: Markus Meier

Refraco 1207 Rue Antonio-LemaireChicoutimi, QC, G7K 1J2, CanadaTel: (418) 545-4200email: [email protected]: www.refraco.comContact: Luc Flamand

Reliant Aluminum Products, LLC520 Townsend AveHigh Point, NC 27263Tel: (866) 574-0790email: chris.parker@reliant

aluminumproducts.comweb: www.reliantaluminum

products.comContact: Chris Parker



Remelt Technologies, Inc.PO Box 915353Longwood, FL 32791Tel: (407) 880-2444email: [email protected]: Gary Bowden

R&M Fluid Power Inc.7953 Southern Blvd. Youngstown, OH 44512Tel: (330) 758-2766email: [email protected]: www.rmfluidpower.comContact: Tom Nentwick

Riedhammer GmbH Klingenhofstrasse 72Nuremberg, 90518, GermanyTel: (49) 911 5218-395email: thomas.janousch@

riedhammer.deweb: www.riedhammer.deContact: Thomas Janousch

REISCH Maschinenbau GmbHSonnenbergerstrasse 46820 Frastanz, AustriaTel: (43) 5522 51710-0email: [email protected]: www.reisch.atContact: Arno Reisch

Remelt Technologies, Inc.PO Box 915353Longwood, FL 32791Tel: (407) 880-2444email: gbowden-remelt@

earthlink.netContact: Gary Bowde

Romidot Ltd.4 Hamelacha StLod 7152008, IsraelTel: (972) 8-9243638email: [email protected]: www.romidot.comContact: Yael Barzilay

Sanshin Sanwa Group505 Holland Hills Mori Tower 5-11-1Minato-ku, Tokyo, 105-0001, JapanTel: (81) 3-5776-2190email: m.rushlander@sanwacorpo-

ration.co.jpweb: www.sanwacorporation.co.jpContact: Michie Rushlander

The Schaefer Group, Inc.1500 Humphrey Ave.Dayton, OH 45410Tel: (937) 253-3342email: david.nelson@theschaefer

group.comweb: www.theschaefergroup.comContact: David Nelson

Schmidt + Clemens GroupKaiserau 251789 Lindlar, GermanyTel: (49) 2266 92-0email: [email protected]: www.schmidt-clemens.comContact: Stefan Duesmann

Scottish Chemical Industries5th Floor, Span CentreSouth Avenue, Santa Cruz-WMumbai, Maharasutra 400054IndiaTel: (91) 22 2605 6666email: [email protected]: www.scottishchemical.comContact: Rishab Khandelwal

SCR Technologies1 Southwire Dr.Carrollton, GA 30119Tel: (770) 832-5618email: [email protected]: www.southwire.comContact: Reed Von Gal

SECO/Warwick Corp. 180 Mercer St., PO Box 908Meadville, PA 16335 Tel: (814) 332-8430email: [email protected]: www.secowarwick.comContact: Beth Ryan

Selee Corporation700 Shepherd St.Hendersonville, NC 28792Tel: (828) 697-2411email: [email protected]: www.selee.comContact: Watt Jackson

Sentech Precimeter Inc. 2215 S. 48th St., Suite CTempe, AZ 85282Tel: (480) 829-1923email: [email protected]: www.precimeter.comContact: Jerry Wilkins

SenTek Corporation1160-B Alum Creek Dr. Columbus, OH 43209Tel: (614) 586-1123email: [email protected]: www.sentekcorp.comContact: Ron Fry

Sermas Industrie343 Chemin du Stade38210 St. Quentin sur Isére, FranceTel: (33) 476 07 42 42email: [email protected]: www.sermas.comContact: Damian Ventura

SerVaas Factories International1000 Waterway Blvd.Indianapolis, IN 46202Tel: (317) 633-2022email: [email protected]: www.servaasfactories.comContact: Kevin Green

SGL Carbon GmbHWerner-von-Siemens Str. 1886405 Meitingen, GermanyTel: (49) 8271 83 1212email: [email protected]: www.sglgroup.comContact: Winfried Suessner

Shin Jye Industrial Co. Ltd.No. 36, Sec. 1, Chung Shan RoadShinjhuang City, Taipei HsienTaiwan, R.O.C. 242Tel: (886) 2-8522-5520email: [email protected]: www.shinjye.com.twContact: Sales

Siddharth Heavy Industries Pvt. Ltd. 492/A Waghawade Rd., MachheBelgaum, Karnataka 590014, IndiaTel: (91) 831-2411172 / 75email: [email protected]: www.siddharthindustries.comContact: Prashant Jadhav

Siemens501 Technology Dr.Canonsburg, PA 15317Tel: (724) 514-8500email: metals.industry@

siemens.comweb: www.siemens.com/metalsContact: Andrew Frampton

simonsen a/sMøgelvangs Plads 7DK-7900 Nykøbing Mors, DenmarkTel: (45) 9669 1300email: [email protected]: www.simonsen.euContact: Morten Simonsen

Skamol A/SØstergade 58-60DK-7900 Nykøbing Mors, DenmarkTel: (45) 9772 1533email: [email protected]: www.skamol.comContact: Holger R. Ostergaard

Sistem Teknik Ltd. STITaysad Tosb 1, Cad. 14, Sok. No. 341420 Çayirova, Kocaeli, TurkeyTel: (90) 262 658 2226email: [email protected]: www.sistemteknik.comContact: Erdal Sahin



SMS Meer Inc.210 W. Kensinger Dr. Cranberry Twp, PA 16066Tel: (724) 553-3427email: [email protected]: www.sms-meer.comContact: John Bergman

SMS Siemag LLC100 Sandusky StreetPittsburgh, PA 15212Tel: (412) 231-1200email: [email protected]: www.sms-siemag.usContact: Keith Watson

Fives Solios25-27 bd de la Paix78100 Saint Germain en LayeFranceTel: (33) 4 7249 5442email: fabienne.virieux@ fivesgroup.com

web: www.fivesgroup.comContact: Fabienne Virieux

Solios ThermalHeath Brook House, Heath Mill RoadWombourne, WolverhamptonWV5 8AP, EnglandTel: (44) 1902 324000email: fabienne.virieux@ fivesgroup.com

web: www.fivesgroup.comContact: Fabienne Virieux

Southeastern Extrusion and Tool, Inc.510 Staples DriveFlorence, AL 35630Tel: (256) 766-6421email: [email protected]: www.set-tool.comContact: Wilbur Craven

Southwire SCR TechnologiesOne Southwire Dr. Carrollton, GA 30119Tel: (770) 832-4505email: [email protected]: www.southwire.comContact: Mike Gallagher

Southworth Products Corp. PO Box 1380Portland, ME 04104Tel: (800) 743-1000email: salesinfo@southworth

products.comweb: www.southworthproducts.comContact: Randall Moore

SPX Precision Components, FENN Division

300 Fenn RoadNewington, CT 06111Tel: (860) 594-4300

email: [email protected]: www.spxprecision.comContact: Jackie Flint

SSI Shredding Systems, Inc.9760 SW Freeman Dr.Wilsonville, OR 97070Tel: (503) 682-3633email: [email protected]: www.ssiworld.comContact: Dave Wilson

Starcut SRLVia Achille Grandi 120032 Cormano, Milan, ItalyTel: (39) 261 359 708email: [email protected]: www.starcut.itContact: Laura Felisari

STAS Inc.1846 Rue des OutardesChicoutimi, QC, G7K 1H1, CanadaTel: (418) 696-0072email: [email protected]: www.stas.comContact: Florent Gougerot

Stelter & Brinck, Ltd. 201 Sales Ave.Harrison, OH 45030Tel: (513) 367-9300email: [email protected]: www.stelterbrinck.comContact: Melanie Trenkamp

Stines Equipment Company265 Silver Leaf DriveMedina, TN 38355Tel: (731) 215-7856email: [email protected]: www.stinesequipment.comContact: Tom Stines

Sunbelt Lubricants5025 Hartford St.Tampa, FL 33619Tel: (813) 248-6191email: [email protected]: www.sunbeltlubricants.comContact: Martin Morris

Sunwoo Engineering Co., Ltd. 126 beon-gil.Asan City, Gyeonggi-do, 425836South KoreaTel: (82) 32 576 8528email: [email protected]: www.isunwooeng.comContact: Ken Ahn

Surface Combustion Inc.1700 Indian Wood CircleMaumee, OH 43537Tel: (419) 891-7150email: [email protected]

web: www.surfacecombustion.comContact: Amy Syroka

Taber Industries455 Bryant StreetNorth Tonawanda, NY 14120Tel: (716) 694-4000email: [email protected]: www.taberindustries.comContact: Alan Jaenecke

Tandem Industries – Div. of TST Inc.11601 Etiwanda Ave.Fontana, CA 92337Tel: (951) 727-3186email: [email protected]: www.tst-inc.comContact: Gary Rossi

Tecalex USA8510 Perry Highway Pittsburgh, PA 15237Tel: (412) 635-0609email: [email protected]: www.tecalexusa.comContact: James Bunting

Techmo Car SpAVia R. Colpi 15/17 35010 Limena (PD), ItalyTel: (39) 049 8655 211email: [email protected]: www.techmo.itContact: Elena Batta

Tellkamp Systems, Inc.15523 Carmenita Rd.Santa Fe Springs, CA 90670Tel: (562) 802-1621email: [email protected]: www.tellkamp.comContact: Scott Bogut

Thermika Systems Inc.2-169 Golden DriveCoquitlam, BC, V3K 6T1, CanadaTel: (330) 506-9291email: [email protected]: www.thermikasystems.comContact: Tom Nentwick

Thermserve LimitedHalesfield 2Telford, Shropshire, TF7 4QH, U.K.Tel: (44) 1952 684 488email: [email protected]: www.thermserve.comContact: Paul Armitage

Thomas & Coffey Ltd.3-7 Enterprise St.Boyne Island, QLD, 4680, AustraliaTel: (61) 0749 737600email: [email protected]: www.thomascoffey.com.auContact: Ian Horley



Thorpe Technologies Inc.449 W. Allen Ave, Suite 119San Dimas, CA 91773Tel: (562) 903-8230email: [email protected]: www.thorpetech.comContact: John Allen

Thumb Tool and Engineering 354 Liberty StreetBad Axe, MI 48413Tel: (989) 269-9731email: [email protected]: www.thumbtool.comContact: George Taylor

TMS (The Minerals, Metals & Materials Society)

184 Thorn Hill Rd.Warren, PA 15086Tel: (724) 776-9000email: [email protected]: www.tms.orgContact: Matt Baker

TPS Infrastructure Limited84, M Block Commercial ComplexGreater Kailash, Part IINew Delhi, 110048, IndiaTel: (91) 11 29212101email: [email protected]: www.tpsmfg.comContact: Virendra Obero

Trasmetal SpAViale Monza 338Milan 20128, ItalyTel: (39) 02 27 09 41email: [email protected]: www.trasmetal.netContact: Carlo Zucchetti

Tru-Cut Saw, Inc.2303 Interstate ParkwayBrunswick, OH 44212Tel: (330) 225-4090email: [email protected]: www.trucutsaw.comContact: Tom Nentwick

T.T. Tomorrow Technology S.p.A.Via Dell’Artigianato 1835020 Due Carrare (PD), ItalyTel: (39) 049 9128800email: [email protected]: www.tomorrowtechnology.itContact: Giovanni Magarotto

Turla SrlVia del Pavione 6/8Paderne Franciacorta (BS) 25050, ItalyTel: (39) 030-6857555email: [email protected]: www.turla.itContact: Alessandro Guerrini

UBE Machinery Inc.5700 South State StreetAnn Arbor, MI 48108Tel: (734) 646-6774email: [email protected]: www.ubemachinery.comContact: Scott J. Burkett

Ultra-Sonic Extrusion Dies Inc. 34863 Groesbeck Hwy.Clinton Township, MI 48035Tel: (586) 791-8550email: [email protected]: www.usedies.comContact: Dave Schoenegge

United States Controls, Inc.8511 Foxwood Ct. Poland, OH 44514Tel: (330) 758-1147email: [email protected]: www.unitedstatescontrols.comContact: Rod Christensen

Urja Products Pvt. Ltd.423 Gidc. Tele. Exchange LaneOdhav, AhmedabadGujarat, 382415, IndiaTel: (91) 22872287email: [email protected]: www.urjafabrics.comContact: A. Nanavaty

USArc Spark Inc. 30428 Milford Rd., Bldg 131Milford, MI 48165Tel: (734) 525-2680email: [email protected]: www.usarcspark.comContact: Alan Ekquist

Rusal VAMI JSCV.O. 86 Sredny ProspectSt. Petersburg 199106, RussiaTel: (7) 812 449-5101email: [email protected]: www.vami.ruContact: Vyacheslav Paraska

Vapormatt Ltd.Monarch Ctr., Venture WayPriorswood Industrial EstateTaunton, Somerset, TA2 8DE, UKTel: (509) 926-4800email: [email protected]: www.vapormatt.comContact: Craig Johnson

VHE ehf Melabraut 27IS-220 Hafnarfjordur, IcelandTel: (11) 354 575 9700email: [email protected]: www.vhe.isContact: Barry Woodrow

VIG Makina San Tic. Ltd. Sti.Tavsanli Koyu Esentepe Mevkii 13 Sk. No. 11Gebze, Kocaeli, TurkeyTel: (90) 262 724 8669email: [email protected]: www.viggroup.com.trContact: Omer Bulbul

Viking Metallurgical LLC208 Old Fort Rd.Fairview, NC 28730Tel: (828) 275-2519email: [email protected]: www.vikingmetallurgical.comContact: J.D. Schloz

VIP Tooling Inc. 739 E. Franklin St.Shelbyville, IN 46176Tel: (317) 398-0753email: [email protected]: www.viptooling.comContact: Gary Dion

Wagstaff, Inc.3910 North Flora Rd.Spokane, WA 99216Tel: (509) 922-1404email: [email protected]: www.wagstaff.comContact: Kevin Person

Wahl Refractory Solutions, LLC767 State RT 19 SFremont, OH 43420Tel: (800) 837-9245email: [email protected]: www.wahlref.comContact: Timothy Albertson

Walgren Co. 3677 Sysco Ct. SEGrand Rapids, MI 49512Tel: (616) 942-8910email: [email protected]: www.walgren.comContact: Gary Kriesch

Wefa Cedar Inc.104 W. Beech St., PO Box K209Cedar Springs, MI 49319Tel: (616) 696-0873email: [email protected]: www.wefa.comContact: Jon Veenstra

Wellman Furnaces Ltd. Newfield Rd., Oldbury Birmingham, B69 3ET, EnglandTel: (44) 121 543 0000email: trevor.walton@

wellman-thermal.comweb: www.wellman-furnaces.comContact: Trevor Walton

Keep Informed!

Magazine Subscription – U.S. Rates1 Year - $56.00 2 Years - $68.00 Magazine Subscription – Outside U.S.Surface Mail1 Year - $95.00 2 Years - $140.00 Airmail1 Year - $128.00 2 Years - $210.00 Magazine Subscription – Digital1 Year - $35.00 2 Years - $66.00

Timely knowledge of the advancing technology

of Light Metals can be invaluable,Subscribe Today!

www.LightMetalAge.com

• Rating Your Extrusion Operation

• Extrusion Product Lifecycle



Werner Extrusion Solutions LLC1580 S. Milwakee Ave, Ste 225Libertyville, IL 60048Tel: (847) 910-0607email: craig.werner@wernerextru-

sion.comweb: www.wernerextrusion.comContact: Craig Werner

Williamson Corp.70 Domino Dr.Concord, MA 01742Tel: (978) 369-9607email: [email protected]: www.williamsonir.comContact: William Barron Jr.

WorleyParsons Level 5, Focus Five Building23 Gheringhap St.Geelong, VIC 3216, AustraliaTel: (61) 3 5249 6900email: scott.grant@worleyparsons.

comweb: www.worleyparsons.comContact: Scott Grant

Worswick Engineering Ltd.Philips Rd., BlackburnLancashire, BB1 5SG, U.K.Tel: (44) 1254 261351

email: [email protected]: www.worswick.comContact: A.C. Worswick

Youngstown Tool & Die Co. Inc. 1261 Poland Ave.Youngstown, OH 44502Tel: (330) 747-4464email: [email protected]: www.youngstowntool.comContact: Fred Fisher

ZIRCAR Ceramics, Inc.100 North Main St.Florida, NY 10921Tel: (845) 651-6600email: [email protected]: www.zircarceramics.comContact: David Hamling

Zircar Refractory Composites, Inc.PO Box 489Florida, NY 10921Tel: (845) 651-2200email: [email protected]: www.zrci.comContact: Nancy Miehe

Zmag America, Ltd. 10260 SW Greenburg Rd., Ste. 400Portland, OR 97223

Tel: (503) 293-8481email: [email protected]: www.z-mag.netContact: Eishin Takahashi

ZYP Coatings, Inc.120 Valley Court, PO Box 2590Oak Ridge, TN 37830Tel: (865) 482-5717email: [email protected]: www.zypcoatings.comContact: C.E. Holcombe

Vortex Coil Annealing

■ Fast heating rates with Jet Flow technology

■ Uniform surface heat distribution with Vortex Nozzle technology

■ Fast Cooling Rates when combined with SECO/WARWICK By-Pass Cooler technology

Drop Bottom Solution Heat Treat

■ Affordable solutions with standard or custom engineered technology

■ Economical options with fuel fired or electrically heated technology

■ Meets stringent TUS requirements with proven airflow design technology

Continuous Log Homogenizing

■ Processes a range of log diameters with vertical airflow technology

■ Fast heating rates with impingement technology

■ Outstanding temperature uniformity with directed nozzle technology

USASECO/WARWICK Corp.Tel. 814 332-8400

POLANDSECO/WARWICK S.A.Tel. +48 68 38 20 500

For more information, go to www.secowarwick.com or call:Jack Mahoney 814-332-8430Charles Cassano 814-332-8569

www.secowarwick.com

Advanced aluminum process technologiesSECO/WARWICK GROUP

Ready to flip the switch for thepurchase of some new furnaces?

Contact GNA...

www.gna.ca

GNA alutech inc.Montreal, Canada

+1 514 956 [email protected]

Date post:	12-May-2018
Category:	Documents
Upload:	nguyendat
View:	243 times
Download:	7 times

PRIMARY • EXTRUSION • SECONDARY • FLAT … Corp. Kempe Engineering Metal 7 Inc. Directory of...

Documents