Date post: | 20-Oct-2018 |
Category: |
Documents |
Upload: | truongnguyet |
View: | 215 times |
Download: | 0 times |
METAL LABORATORY SYSTEMS
PRIME-AIRE
38426 PRIME COVER 10/21/08 3:19 PM Page 1
Specifications 1
Base Cabinets - Standing/Counter Height 2 - 8
Base Cabinets - Sink/Fume Hood Standing Height 9
Base Cabinets - Special Purpose 10
Acid Storage Cabinets 11
Flammable Storage Cabinets 11
Base Cabinets - Sitting/Desk Height 12 - 14
Corner Base Cabinets - Sitting/Desk Height 15
Corner Sink Cabinets - Sitting/Desk Height 15
Wall Case Units 16 - 17
Corner Wall Case Units 17
Floor Case Units 18 - 19
Fume Hoods 20 - 21
Aprons and Drawer Housings 22
Utility Tables 23
Accessories 24 - 25
TABLE OF CONTENTS
PRIME-AIRE LABORATORY SYSTEMS
BASE CABINETS Standing/Counter Height
Removable backs
Full extension, ball bearing, plated drawerslides.
Doors and drawer heads are “doublepan” construction and sound deadened
Adjustable doors with full access opening
Stainless steel, 5 knuckleinstitutional type hinge - 13 ga.
Removable bottompanned up tocontain spills
Full depth adjustable shelfAdjustable on 1" centers
Standard pulls are flush,extruded aluminum withcapability to be a label holder,or aluminum bar style pull.
Additional Specifications
All surfaces shall be painted or zinc plated. The paint is a chemical resistantbaked on epoxy powder. Specific test data is available upon request.
Gauges of base cabinet components are as follows:
Aprons 18 ga. Legs - 2" sq. tube 18 ga.Back Panels 20 ga. Shelves 18 ga.Bottom Panels 18 ga. Side Panels 18 ga.Drawer/Door Outer Panel 20 ga. Table Frames 18 ga.Door Inner Panel 20 ga. K & V Shelve ClipDrawer Bodies 20 ga.
For complete specifications, request our full line of products specifications.Subject to change.
Flush Front Construction
PRIME-AIRE LABORATORY SYSTEMS (1)
BASE CABINETS Standing/Counter Height
Standing/Counter Height 35" High x 22" Deep. Units are available in various widths as shown. Drawer unitsfeature full extension slides. A single shelf is standard in the units shown. Additional shelves are available (seepage 11). Specify left or right hand doors. Hand is indicated by side of door upon which hinge is located.
Part Numbering SystemSample: B3536-048 1 = Base unit 4 = #Doors
12233-456 2 = Height 5 = #Drawers3 = Width 6 = #Half Drawers
*"F” = File Drawer*"S” = Sink Unit*"P” = Panel*"R” = Right hinge facing cab.*"L” = Left hinge facing cab.
B3515-000B3518-000B3524-000
B3515-102(R)B3518-102(R)B3524-102(R)
B3515-102(L)B3518-102(L)B3524-102(L)
B3515-110(R)B3518-110(R)B3524-110(R)
B3515-110(L)B3518-110(L)B3524-110(L)
B3515-100(R)B3518-100(R)B3524-100(R)
B3515-100(L)B3518-100(L)B3524-100(L)
NOTE: When ordering units with configurations that are non-standard, drawings must accompany order.
21 7/8"
35"
4"
3"18 7/8"
(2) PRIME-AIRE LABORATORY SYSTEMS
BASE CABINETS Standing/Counter Height
B3515-F20B3518-F20B3524-F20
B3530-000B3536-000B3542-000B3548-000
B3515-FFOB3518-FFOB3524-FFO
B3515-F12B3518-F12B3524-F12
B3515-008B3518-008B3524-008
B3515-024B3518-024B3524-024
B3515-032B3518-032B3524-032
B3515-040B3518-040B3524-040
PRIME-AIRE LABORATORY SYSTEMS (3)
BASE CABINETS Standing/Counter Height
B3530-200B3536-200B3542-200B3548-200
B3530-204B3536-204B3542-204B3548-204
B3530-212BB3536-212BB3542-212BB3548-212B
B3530-212AB3536-212AB3542-212AB3548-212A
B3530-220B3536-220B3542-220B3548-220
B3530-210B3536-210B3542-210B3548-210
B3530-110(R)SPB3536-110(R)SPB3542-110(R)SPB3548-110(R)SP
B3530-110(L)SPB3536-110(L)SPB3542-110(L)SPB3548-110(L)SP
(4) PRIME-AIRE LABORATORY SYSTEMS
38426 photo pages.indd 138426 photo pages.indd 1 10/21/08 4:03:59 PM10/21/08 4:03:59 PM
BASE CABINETS Standing/Counter Height
B3530-140B(L)B3536-140B(L)B3542-140B(L)B3548-140B(L)
B3530-132(R)B3536-132(R)B3542-132(R)B3548-132(R)
B3530-132(L)B3536-132(L)B3542-132(L)B3548-132(L)
B3530-142(R)B3536-142(R)B3542-142(R)B3548-142(R)
B3530-142(L)B3536-142(L)B3542-142(L)B3548-142(L)
B3530-150(R)B3536-150(R)B3542-150(R)B3548-150(R)
B3530-150(L)B3536-150(L)B3542-150(L)B3548-150(L)
B3530-140B(R)B3536-140B(R)B3542-140B(R)B3548-140B(R)
PRIME-AIRE LABORATORY SYSTEMS (5)
BASE CABINETS Standing/Counter Height
B3530-100(L)SPB3536-100(L)SPB3542-100(L)SPB3548-100(L)SP
B3530-048BB3536-048BB3542-048BB3548-048B
B3530-048AB3536-048AB3542-048AB3548-048A
B3530-134(R)B3536-134(R)B3542-134(R)B3548-134(R)
B3530-134(L)B3536-134(L)B3542-134(L)B3548-134(L)
B3530-140A(R)B3536-140A(R)B3542-140A(R)B3548-140A(R)
B3530-140A(L)B3536-140A(L)B3542-140A(L)B3548-140A(L)
B3530-100(R)SPB3536-100(R)SPB3542-100(R)SPB3548-100(R)SP
NOTE: When ordering units with configurations that are non-standard, drawings must accompany order.
(6) PRIME-AIRE LABORATORY SYSTEMS
38426 photo pages.indd 238426 photo pages.indd 2 10/21/08 4:03:59 PM10/21/08 4:03:59 PM
B3530-040B3536-040B3542-040B3548-040
B3530-044BB3536-044BB3542-044BB3548-044B
B3530-044AB3536-044AB3542-044AB3548-044A
B3530-032B3536-032B3542-032B3548-032
B3530-024B3536-024B3542-024B3548-024
B3530-080B3536-080B3542-080B3548-080
B3530-060B3536-060B3542-060B3548-060
B3530-050B3536-050B3542-050B3548-050
BASE CABINETS Standing/Counter Height
PRIME-AIRE LABORATORY SYSTEMS (7)
BASE CABINETS Standing/Counter Height
B3530-048CB3536-048CB3542-048CB3548-048C
B3530-052B3536-052B3542-052B3548-052
B3530-008B3536-008B3542-008B3548-008
B3530-070BB3536-070BB3542-070BB3548-070B
B3530-070AB3536-070AB3542-070AB3548-070A
B3530-064B3536-064B3542-064B3548-064
NOTE: When ordering units with configurations that are non-standard, drawings must accompany order.
(8) PRIME-AIRE LABORATORY SYSTEMS
SINK AND FUME HOOD BASE CABINETS Stand Up Height
Sink BaseB3518-10S(R)B3524-10S(R)
Sink BaseB3518-10S(L)B3524-10S(L)
Sink BaseB3518-10S(R)LouveredB3524-10S(R)Louvered
Sink BaseB3518-10S(L)LouveredB3524-10S(L)Louvered
Hood BaseB3518-10P(R)B3524-10P(R)
Hood BaseB3518-10P(L)B3524-10P(L)
Sink BaseB3530-20SB3536-20SB3542-20SB3548-20SB3552-20SB3558-20S
Sink Island BaseB3552-20SIB3558-20SI
Sink BaseB3530-20S LouveredB3536-20S LouveredB3542-20S LouveredB3548-20S LouveredB3552-20S LouveredB3558-20S Louvered
Hood BaseB3530-20PB3536-20PB3542-20PB3548-20PB3552-20PB3558-20P
Hood Island BaseB3552-20PIB3558-20PI
Sink SupportAssembly SS-36SS-C14 SS-48SS-18 SS-42SS-24 SS-52SS-30 SS-58
ALSO AVAILABLE IN SITTING/DESK HEIGHT
PRIME-AIRE LABORATORY SYSTEMS (9)
38426 photo pages.indd 338426 photo pages.indd 3 10/21/08 4:04:00 PM10/21/08 4:04:00 PM
BASE CABINETS Special Purpose Bases
C3514-100(L)
14 1/8"
21 7/8"
31 7/8" Typical Dimensions
C3514-100(R)(SHOWN WITHOPTIONAL LAZYSUSAN INSTALLED)
C3514-10S(L) C3514-10S(R)
C3514-10S(L)Louvered
C3514-10S(R)Louvered
MOBILE BASES
MB2915-030MB2918-030MB2924-030MB2930-030
MB3515-040MB3518-040MB3524-040MB3530-040
(10) PRIME-AIRE LABORATORY SYSTEMS
38426 photo pages.indd 438426 photo pages.indd 4 10/21/08 4:04:01 PM10/21/08 4:04:01 PM
ACID STORAGE CABINET
E
S TR
GD
ASB2918-100 ASB3518-100ASB2924-100 ASB3524-100ASB2930-200 ASB3530-200ASB2936-200 ASB3536-200ASB2942-200 ASB3542-200ASB2948-200 ASB3548-200ASB2952-200 ASB3552-200ASB2958-200 ASB3558-200
Metal-Arc Acid Storage Cabinets are reinforced steel with a hi-tech performance polymer alloycoating. This reduces the possibilities of corrosion. Note: All Acid Cabinets are 18" deep.
FLAMMABLE STORAGE CABINET
L EAYAA
KEE PF
AWAAAA
FSB2924-100 FSB3524-100FSB2930-200 FSB3530-200FSB2936-200 FSB3536-200FSB2942-200 FSB3542-200FSB2948-200 FSB3548-200FSB2952-200 FSB3552-200FSB2958-200 FSB3558-200
STANDARD SHELF PULL-OUT SHELF
Standard basecabinet shelf withbrackets. Availablefor 29" and 35"units.
BS15BS18BS21BS24BS30BS36BS42BS48
Optional pull-out shelf for basecabinets. Shelf is full extensionwith ball bearing slides. *Note:Cabinet door must be open 90 deg.to allow for extension.
BPS15BPS18BPS21BPS24BPS30BPS36BPS42BPS48
NOTE: When ordering units with configurations that are non-standard, drawings must accompany order.
} 1 Door Units
} 1 Door Units
Add Suffix “VK” if Vent Kit is Required
Note: All Flammable Cabinets are 18" deep.
PRIME-AIRE LABORATORY SYSTEMS (11)
AYA
KEE PF
AWAA
E
S T OR AGACI D
38426 photo pages.indd 538426 photo pages.indd 5 10/21/08 4:04:02 PM10/21/08 4:04:02 PM
BASE CABINETS Sitting/Desk Height
Sitting/Desk Height 29" High X 22" Deep. Units are available in various widths as shown.Drawer units feature full extension slides. A single shelf is standard in the units whereshown. Additional shelves are available (see page 11). Specify left or right hand doors.Hand is indicated by side of door upon which hinges are located.
* “F” = File Drawer* “S” = Sink Unit* “P” = Panel over door(s)* “R” = Right hinge facing cab.* “L” = Left hinge facing cab.* “B” = Bin Drawer
29"
3"
4"
Part Numbering SystemSample: B2930-044 1= Base Unit 4= #Doors
12233-456 2= Height 5= #Drawers3= Width 6= #Half Drawers
7= Features
B2915-000B2918-000B2924-000B2930-000B2936-000B2942-000B2948-000
B2915-100(L)B2918-100(L)B2924-100(L)
B2915-110(R)B2918-110(R)B2924-110(R)
B2915-102(L)B2918-102(L)B2924-102(L)
B2915-102(R)B2918-102(R)B2924-102(R)
B2915-F10B2918-F10B2924-F10
End View
B2915-100(R)B2918-100(R)B2924-100(R)
B2915-110(L)B2918-110(L)B2924-110(L)
NOTE: When ordering units with configurations that are non-standard, drawings must accompany order.
18 7/8"
21 7/8"
(12) PRIME-AIRE LABORATORY SYSTEMS
BASE CABINETS Sitting/Desk Height
B2915-F02B2918-F02B2924-F02
B2930-210B2936-210B2942-210B2948-210
B2930-200B2936-200B2942-200B2948-200
B2930-060B2936-060B2942-060B2948-060
B2930-006B2936-006B2942-006B2948-006
B2930-044B2936-044B2942-044B2948-044
B2930-050B2936-050B2942-050B2948-050
B2930-040B2936-040B2942-040B2948-040
PRIME-AIRE LABORATORY SYSTEMS (13)
BASE CABINETS Sitting/Desk Height
B2915-030B2918-030B2924-030
B2930-110(L)SPB2936-110(L)SPB2942-110(L)SPB2948-110(L)SP
B2930-110(R)SPB2936-110(R)SPB2942-110(R)SPB2948-110(R)SP
B2930-220B2936-220B2942-220B2948-220
B2930-100(RorL)SPB2936-100(RorL)SPB2942-100(RorL)SPB2948-100(RorL)SP
B2915-006B2918-006B2924-006
B2915-022B2918-022B2924-022
B2915-B11B2918-B11B2924-B11
(14) PRIME-AIRE LABORATORY SYSTEMS
38426 photo pages.indd 638426 photo pages.indd 6 10/21/08 4:04:03 PM10/21/08 4:04:03 PM
CORNER BASE CABINET Sitting/Desk Height
CORNER SINK BASE CABINETS Sitting/Desk Height
OPTIONAL LAZY SUSAN (For corner base cabinets)
C2914-100(L)
14 1/8"
21 7/8"
31 7/8" Typical Dimensions
C2914-100(R)
C2914-10S(L) C2914-10S(R)
(SHOWN WITH OPTIONALLAZY SUSAN INSTALLED)
C2914-10S(L)Louvered
C2914-10S(R)Louvered
LS-29LS-35
PRIME-AIRE LABORATORY SYSTEMS (15)
WALL CASE UNITSWall cases are available in sizes ranging from 24", 31", 36" and 48" high and 18" wide to 48" wide. Allunits are 13" deep as standard. 24" high units have one shelf. 31" high to 36" high units have twoshelves. 48" high units have three shelves. Additional shelves are available. On single hinge doorunits, specify (R) or (L) hinge. 48" high units have 3 hinges per door.
Part Numbering SystemSample: W3036-2GS 1= Wall Case 4= #Doors
12233-4567 2= Height 5= Material of doors*3= Width 6= Type of doors* *
7= Depth Note: 13" dp. standard,16" deep cabinets available -indicate by final suffix of 16,(Example: W2418-00016)
W2418-000 W3018-000 W3618-000 W4818-000W2424-000 W3024-000 W3624-000 W4824-000W2430-000 W3030-000 W3630-000 W4830-000W2436-000 W3036-000 W3636-000 W4836-000W2442-000 W3042-000 W3642-000 W4842-000W2448-000 W3048-000 W3648-000 W4848-000
* Steel, Glass or no doors (open)* * Hinged, Sliding or Sliding/framed* “R” = Right hinge facing cabinet* “L” = Left hinge facing cabinet
W2418-1SH(L)W3018-1SH(L)W3618-1SH(L)W4818-1SH(L)W2424-1SH(L)W3024-1SH(L)W3624-1SH(L)W4824-1SH(L)
W2418-1SH(R)W3018-1SH(R)W3618-1SH(R)W4818-1SH(R)W2424-1SH(RW3024-1SH(R)W3624-1SH(R)W4824-1SH(R)
W2418-1GH(L)W3018-1GH(L)W3618-1GH(L)W4818-1GH(L)W2424-1GH(L)W3024-1GH(L)W3624-1GH(L)W4824-1GH(L)
W2418-1GH(R)W3018-1GH(R)W3618-1GH(R)W4818-1GH(R)W2424-1GH(R)W3024-1GH(R)W3624-1GH(R)W4824-1GH(R)
W2430-2SH W3630-2SHW2436-2SH W3636-2SHW2442-2SH W3642-2SHW2448-2SH W3648-2SHW3030-2SH W4830-2SHW3036-2SH W4836-2SHW3042-2SH W4842-2SHW3048-2SH W4848-2SH
NOTE: When ordering units with configurations that are non-standard, drawings must accompany order.
W2430-2SS W3630-2SSW2436-2SS W3636-2SSW2442-2SS W3642-2SSW2448-2SS W3648-2SSW3030-2SS W4830-2SSW3036-2SS W4836-2SSW3042-2SS W4842-2SSW3048-2SS W4848-2SS
(16) PRIME-AIRE LABORATORY SYSTEMS
WALL CASE UNITS
W2430-2GH W3630-2GHW2436-2GH W3636-2GHW2442-2GH W3642-2GHW2448-2GH W3648-2GHW3030-2GH W4830-2GHW3036-2GH W4836-2GHW3042-2GH W4842-2GHW3048-2GH W4848-2GH W2430-2GSF W3630-2GSF
W2436-2GSF W3636-2GSFW2442-2GSF W3642-2GSFW2448-2GSF W3648-2GSFW3030-2GSF W4830-2GSFW3036-2GSF W4836-2GSFW3042-2GSF W4842-2GSFW3048-2GSF W4848-2GSF
W2430-2GS W3630-2GSW2436-2GS W3636-2GSW2442-2GS W3642-2GSW2448-2GS W3648-2GSW3030-2GS W4830-2GSW3036-2GS W4836-2GSW3042-2GS W4842-2GSW3048-2GS W4848-2GS
WDS3030-00013 open-2-sWDS3036-00013 open-2-sWDS3048-00013 open-2-s
WDS3036-4GS13 open-2-sWDS3048-4GS13 open-2-s
CORNER WALL CASE UNITS
WC3018-000WC3618-000WC3018-00016WC3618-00016
WC3018-1SH(RorL)WC3618-1SH(RorL)WC3018-1SH(RorL)16WC3618-1SH(RorL)16
WC3018-1GH(L)WC3618-1GH(L)WC3018-1GH(L)16WC3618-1GH(L)16
WC3018-1GH(R)WC3618-1GH(R)WC3018-1GH(R)16WC3618-1GH(R)16
NOTE: When ordering units with configurations that are non-standard, drawings must accompany order.NOTE: 16" deep corner wall case dimension = 28 11/16"
25 11/16"
PRIME-AIRE LABORATORY SYSTEMS (17)
FLOOR CASE UNITS
1/2"
4"
End View (16"Dp. Unit)
Floor cases are available in widths ranging from 18" to 48". All units are 84" high and are available ineither 16" or 21 1/4" depths. Five shelves are standard equipment. Additional shelves are available. Onsingle hinge door units, specify (R) or (L) hinge.
* Steel Glass or no doors (open)* * Hinged, Sliding or Sliding/framed* “R” = Right hinge facing cabinet* “L” = Left hinge facing cabinet
Part Numbering SystemSample: F8418-2SS16 1= Floor Case 4= #Doors
12233-456 2= Height 5= Material of doors*3= Width 6= Type of doors* *
7= Depth
F8418-00016F8418-00021F8424-00016F8424-00021
F8430-00016F8430-00021F8436-00016F8436-00021F8442-00016F8442-00021F8448-00016F8448-00021
F8418-1SH16(L)F8418-1SH21(L)F8424-1SH16(L)F8424-1SH21(L)
F8418-1SH16(R)F8418-1SH21(R)F8424-1SH16(R)F8424-1SH21(R)
NOTE: When ordering units with configurations that are non-standard, drawings must accompany order.
15-1/2"
84"
16"or
21 1/4"
(18) PRIME-AIRE LABORATORY SYSTEMS
FLOOR CASE UNITS
F8418-1GH16(L)F8418-1GH21(L)F8424-1GH16(L)F8424-1GH21(L)
F8430-2GH16F8430-2GH21F8436-2GH16F8436-2GH21F8442-2GH16F8442-2GH21F8448-2GH16F8448-2GH21
F8430-2GSF16F8430-2GSF21F8436-2GSF16F8436-2GSF21F8442-2GSF16F8442-2GSF21F8448-2GSF16F8448-2GSF21
F8430-2SS16F8430-2SS21F8436-2SS16F8436-2SS21F8442-2SS16F8442-2SS21F8448-2SS16F8448-2SS21
F8430-2SH16F8430-2SH21F8436-2SH16F8436-2SH21F8442-2SH16F8442-2SH21F8448-2SH16F8448-2SH21
F8418-1GH16(R)F8418-1GH21(R)F8424-1GH16(R)F8424-1GH21(R)
NOTE: When ordering units with configurations that are non-standard, drawings must accompany order.
PRIME-AIRE LABORATORY SYSTEMS (19)
FUME HOODS
The name PRIME-AIRE has long beensynonymous with quality and longevity. Ournewly redesigned fume hood line is a proudexample of this reputation. Over 50 years ofexperience combined with state of the artengineering, manufacturing and testingfacilities provide you with a fume hoodunsurpassed in quality and performance.
DESIGNThe design of our fume hood line is foundedon three basic principals: safety, flexibilityand aesthetics.
SAFETYSafety should be the number one concernwhen choosing a fume hood. That is whyour hoods are tested and certified inaccordance with the Ashrae method oftesting performance of laboratory fumehoods.
FLEXIBILITYConstruction of our fume hood begins with aheavy duty internal framework. This universalframework is the foundation for a variety ofstandard and optional features.These features include. . . - Chemical resistant interiors of resin-chem,
PVC or stainless steel- PVC or stainless sash guides- Vertical, horizontal or combination sashes
in a variety of materials- Easy access for service fixture installation- Manual or remote baffle adjustment- Flourescent light fixture- Optional factory installation of service
fixturesThe flexibility of our design will allow you toselect standard options that will meet therequirements of your application.
AESTHETICSOur quality, pride and craftsmanship willinsure that your PRIME-AIRE Fume Hoodwill be a handsome center piece in yourlaboratory for years to come.
CATALOGFor a complete fume hood catalog contact usdirect at the following address:
PRIME Industries, Inc.2600 Warrenville Rd., Suite 205Downers Grove, IL 60515Telephone: (630) 725-9200Fax: (630) 725-9201Toll Free: (800) 203-4920www.piilab.com
(20) PRIME-AIRE LABORATORY SYSTEMS
FUME HOODS
BYPASS & VARIABLEAIR VOLUME (VAV)FUME HOODS
PERCHLORIC ACID ANDRADIO-ISOTOPE FUME HOODS
ADA FUME HOODS
WALK-IN AND SPECIALFUME HOODS
PRIME-AIRE LABORATORY SYSTEMS (21)
APRONS AND DRAWER HOUSINGS
KNEE SPACE RAILS
Part Numbering System: A046022-000 1= Apron 4= Depth1223344-555 2= Height 5= # Drawers
3= WidthA042422-000A043022-000A043622-000A044222-000A044822-000A045422-000A046022-000A046622-000A047222-000
A042422-001A043022-001A043622-001A044222-001
A044222-002A044822-002A045422-002A046022-002A046622-002A047222-002
A047222-003
NOTE: When ordering units with configurations that are non-standard, drawings must accompany order.
A042428-000A043028-000A043628-000A044228-000A044828-000A045428-000A046028-000A046628-000A047228-000
A042428-001A043028-001A043628-001A044228-001
A044228-002A044828-002A045428-002A046028-002A046628-002A047228-002
A047228-003
KSR0418KSR0424KSR0430KSR0436KSR0442KSR0448
KSR0452KSR0454KSR0460KSR0466KSR0472KSR0484KSR0496
Note: Apron heights are 4 1/2" high.
(22) PRIME-AIRE LABORATORY SYSTEMS
UTILITY TABLES AND COMPONENTS
NOTE: When ordering units with configurations that are non-standard, drawings must accompany order.
22" DEEPUT292422-000UT293022-000UT293622-000UT294222-000UT294822-000UT296022-000UT297222-000
28" DEEPUT292428-000UT293028-000UT293628-000UT294228-000UT294828-000UT296028-000UT297228-000
22" DEEPUT352422-000UT353022-000UT353622-000UT354222-000UT354822-000UT356022-000UT357222-000
28" DEEPUT352428-000UT353028-000UT353628-000UT354228-000UT354828-000UT356028-000UT357228-000
29" HIGH TABLES 35" HIGH TABLES
22" DEEPUT292422-001UT293022-001UT293622-001UT294222-001
28" DEEPUT292428-001UT293028-001UT293628-001UT294228-001
22" DEEPUT352422-001UT353022-001UT353622-001UT354222-001
28" DEEPUT352428-001UT353028-001UT353628-001UT354228-001
22" DEEPUT294822-002UT296022-002UT297222-002
28" DEEPUT294828-002UT296028-002UT297228-002
22" DEEPUT354822-002UT356022-002UT357222-002
28" DEEPUT354828-002UT356028-002UT357228-002
22" DEEPUT297222-003
28" DEEPUT297228-003
22" DEEPUT357222-003
28" DEEPUT357228-003
NOTE: UTILITY TABLES DO NOT INCLUDE COUNTER TOPS.
22"or 28"
PRIME-AIRE LABORATORY SYSTEMS (23)
ACCESSORIES
NOTE: When ordering units with configurations that are non-standard, drawings must accompany order.
L29-22L35-22L29-28L35-28
TABLE LEGS
SL-29SL-35
SINGLE LEG
SL-29PSL-35P
SINGLE LEG WITH PLATE
29"or 35"
22"or 28"
EP2902-22EP3502-22EP2902-28EP3502-28
END PEDESTAL
Specify WidthWCFF24-WWCFF30-WWCFF36-WWCFF48-W
WALL CASE FRONT FILLER
22"or 28"29"
or 35"
2"
WCCF24WCCF30WCCF36WCCF48
WALL CASE CORNER FILLER RSU1812(18"Hx12"Dx2"W)
Note: Special heights &options available uponrequest. Drawings anddimensions mustaccompany order.
REAGENT SHELF UPRIGHT
PART NUMBERSWALL FLOORWS1813 FS1816WS2413 FS2416WS3013 FS3016WS3613 FS3616WS4213 FS4216WS4813 FS4816WS1816 FS1821WS2416 FS2421WS3016 FS3021WS3616 FS3621WS4216 FS4221WS4816 FS4821
WALL - FLOOR CASE SHELF
SLOPE TOP WITH END CAPS
PART NUMBERS
ST13-18 ST21-18ST13-24 ST21-24ST13-30 ST21-30ST13-36 ST21-36ST13-42 ST21-42ST13-48 ST21-48ST16-18ST16-24ST16-30ST16-36ST16-42ST16-48
Angle is 1"
Specify Depth13" or 16"
(24) PRIME-AIRE LABORATORY SYSTEMS
ACCESSORIES
PRIME-AIRE LABORATORY SYSTEMS (25)
24" HIGHKSP 2424KSP 2430KSP 2436KSP 2442KSP 2448KSP 2454KSP 2460KSP 2466KSP 2472
KNEE SPACE PANELS29" HIGH
KSP 2924KSP 2930KSP 2936KSP 2942KSP 2948KSP 2954KSP 2960KSP 2966KSP 2972
35" HIGHKSP 3524KSP 3530KSP 3536KSP 3542KSP 3548KSP 3554KSP 3560KSP 3566KSP 3572
FILL PANELS
All base cabinet fillers are 35" high. Fillers for 29" high (low base) cabinets will need to be trimmed bythe installer. Other sizes available upon request.
C-FILLERCF35-8CF35-14
L-FILLERLF35-1LF35-7LF35-11
C-FRONT FILLERFFC35-8FFC35-14
CORNER FILLERICF35-1ICF35-2ICF35-4
FLOOR CASE FILLERFFL84-2FFL84-8
TOE SPACE FILLERTSF-00
L-FRONT FILLERFFL35-8FFL35-14
For use in sit downsituation with apron
For use in standingsituation with apron,
or sit down without apron
For use instanding situation
without apron
* Last number(s) in filler designation indicates width of filler assembly.
38426 photo pages.indd 738426 photo pages.indd 7 10/21/08 4:04:04 PM10/21/08 4:04:04 PM
PRIME Industries, Inc.2600 Warrenville Rd., Suite 205Downers Grove, IL 60515Telephone: (630) 725-9200Fax: (630) 725-9201Toll Free: (800) 203-4920www.piilab.com
PRIME-AIRE BY PRIME,2008 Printed in the U.S.A.
PRIME-AIRE
38426 PRIME COVER 10/21/08 3:19 PM Page 2