Prime - April 2015

PRIMEMONTHLY CONTRACTING NEWS

Inside this Issue:Veteran Entrepreneur Training Symposium

Federal Contractors Conference

April 2015

We are a trusted satellite communications company who provide global satellite

communication service and devices. Our services include satellite phone/satellite

internet device sales, satellite phone/satellite internet device rentals, prepaid satellite

sim cards, and monthly service plans. We sell the reliable and durable Iridium and

Inmarsat satellite hardware. Our devices will keep you connected anywhere in the

world. Our bestselling satellite devices are the military trusted Iridium 9505A handheld

portable, the GPS trackable Iridium 9575 Extreme and the newest Iridium device, the

Iridium GO! for global hotspot capabilities. We can also repair any satellite

communications device you have. Please call us for pricing. We can beat any

advertised prices from other satellite companies, because we have been around the

longest we can offer the best rates for our customers. GSA Contract #GS-35F-040T.

Toll Free Number: (888) 678-9728

Website: allroadsat.com

2222 4th Ave Ste. A

San Diego, CA 92101

The monthly Prime publication is designed to provide the nation’s largest contractors in the federal market with useful, up-to-date information. The monthly magazine provides prime federal contractors with industry news, events for prime contractors, and listings of available product and service vendors for subcontracting opportunities. These listings are organized by the North American Industrial Classification System (NAICS) Codes. If you need assistance using this guide, please call our corporate office at (805) 963-6524.

Stay Up-to-Date on Prime Federal Contracting News

News from the Government & Industry

Event Info for Industry & Government Contractors

Travel Information for Business Professionals

Listings sorted by NAICS Codes.

Vendor Products/ Services

Vendor Contact Information

Federal Buyers Guide, Inc.

Chief Executive Officer Stuart Miller

Vice President of Operations

Afzal Hussain

Chief Financial Officer Ken Sterling

Editor-in-Chief

Alejandra Saragoza

IT Department Shawn Whitney

Accounting

Stephanie Arellanes

Account Representatives John Jenkins Jeff Stakee

Johan Delsol Scott Maio

Production Staff

Andrew Tuttle Chris Leidecker Michael Cervin

Jerry Fair

Reach Us At: www.contractingmonthly.com

Email: [email protected]

Federal Buyers Guide, Inc. 324 Palm Avenue

Santa Barbara, CA 93101 Tel: (805) 963-7470 Fax: (805) 963-7478

Copyright © 2014 by Federal Buyers Guide, Inc. All rights reserved. No parts of this publication may be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, or any information storage retrieval system, without written permission of the copyright owner.

About the Prime Publication

Inside this Guide

Individually Serialized, Restricted Keys – ensure our InstaKey® key blanks

cannot be distributed.

Simple, Cost Effective Rekey Avenue – with ‘single key turn’ rekeyable lock

technology, Instakey® locks empower you to rekey in seconds.

Web Accessible Key System Records – everything you need to know about

your key system in a scalable, web-accessed format.

Administered Program Support & Partnership – we partner with you to help you keep

your keyed access program stable and secure.

At InstaKey® we’ve spent over a quarter of a century helping Government and Institutional

. We think of it – and help our Clients run it – as a program built on the 4 Cornerstones of KeyControl®.

Key Management Cornerstones

INSTAKEY SECURITY SYSTEMS

Individually Serialized,

Restricted Keys

Simple, Cost-Effective Rekey Avenue

Administered Program Support & Partnership

Web Accessible Key System Records

800.316.5397 | www.instakey.com | [email protected]

Adorama Inc.42 W 18th St New York, NY 10011, US

[email protected](212)7410401 Ext: 6010

www.adorama.com

Productsprofessional photographyﾷ Digital Cameras ﾷ Law Enforcement / Scientific & Dental ﾷSubminiature8x11 mm ﾷ 3D Stereo Cameras ﾷ Digital PassportSystems ﾷ Pin Hole Cameras ﾷ Novelty Cameras ﾷ 35mm Film SLRCameras ﾷ Finders ﾷ CloseUp Accessories ﾷ 35mm Film RangefinderCamerasﾷ Accessories ﾷ Medium Format Film & Digital Cameras ﾷBacks And Accessories ﾷ Finders & Eye Cups ﾷ Winder/Motor Drives ﾷCloseUp Accessories ﾷ Specialty Cameras ﾷ 35mm & Digital SLRLenses ﾷ Mirrorless / Compact System Lenses ﾷ Rangefinder Lenses &Finders ﾷ Medium Format Lenses ﾷ Panoramic Camera Lenses ﾷ ViewCamera Lenses ﾷ Close Up Equipment ﾷ Auxiliary Lenses & LensAccessories ﾷ Lens to Camera Adapters ﾷ Lens Caps ﾷ Lens Hoods ﾷService Contracts for Lenses ﾷ Flash/Lighting ﾷ Constant OutputLighting Flash/Lighting ﾷ Flash & Lighting AccessoriesTVs, home theater, multimedia projactersﾷ 3D Enabled / Flat Panel / Portable Televisions ﾷ TV / DVD / VCRCombos ﾷ Display Accessories & Mounts ﾷ Home Theater Systems ﾷHome Multimedia Servers / Recorders & Players ﾷ Home DVD /VCR Players & Recorders ﾷ Home Theater Accessories ﾷ HomeTheater Cleaning Products ﾷ Home Theater Lighting / Furniture ﾷReceivers / Amplifiers / Equalizers ﾷ CD / Multimedia Players &Recorders ﾷ Turntables & Accessories ﾷ Bookshelf Micro Systems ﾷSurround Sound Systems ﾷ Speakers ﾷ Accessories ﾷ Headphones &Earphones ﾷ Mounts ﾷ Turntables & Media Players / Recorders ﾷMixers & Amplifiers ﾷ Mixer & Amplifier Accessories ﾷ SoundProcessing ﾷ Wired Microphones ﾷ Wireless Microphones ﾷMicrophone Accessories ﾷ Headphones ﾷ PA / Live Sound Systems &Accessories ﾷ Monitors / Controllers & Accessories ﾷ Speakers /Studio Monitors ﾷ Speaker Accessories ﾷ Musical InstrumentAccessories

Binoculars, Telescopes & All Opticsﾷ Binoculars ﾷ Astronomy, Digital Binoculars ﾷ BinocularAccessories ﾷ Laser, Replacement, Red Dot & Holo Sights ﾷ Rifle,Shotgun & Muzzleloader, Handgun, Archery, Airgun Rifle Scopes ﾷScope Mounting Rings, Bases, Rails & Adapters ﾷ Laser Trainers,Sightingin & Scope, Firearm, Related Shooting Accessories ﾷ Gun &Brass Cleaning Gear ﾷ Eye & Ear Shooting Protection/Enhancement ﾷRadios & Communication Systems ﾷ Forensic & Crime SceneEquipment ﾷ Security Scanners & Metal Detectors ﾷ Crime Scene,Tactical & Trail Cameras ﾷ Knives, Entry & MultiTools ﾷ Bags,Cases, Holsters & Safes ﾷ Clothing & Accessories ﾷ Targets ﾷFlashlights & Area Lights & Accessories ﾷ Spotting & DigitalSpotting Scopes ﾷ Spotting Scope Eyepieces & Accessories ﾷDigiScoping Equipment ﾷ CCD Cameras, Accessories, FilterSystems, Mounts ﾷ CMOS Digital Cameras ﾷ Camera Adapters ﾷVideo Camera C Mounts ﾷ Misc. Photographic Accessories ﾷ PiggyBack Mounts ﾷ Reducers, Flatteners & Correctors MonocularsVideo gear and ProaudioProfessional Video ﾷ Video Cameras ﾷ OnBoard Batteries ﾷ BatteryPacks / Belts / Vests ﾷ Power Accessories ﾷ Lenses & Accessories ﾷFollow Focus ﾷ Matte Box ﾷ On Camera Video Lighting ﾷ GeneralAccessories ﾷ OnBoard DTE Recorders & Accessories ﾷ Guides onUsing Pro Video Cameras Consumer Video ﾷ Camcorders ﾷ OnBoard Batteries ﾷ Power Accessories ﾷ Auxiliary Lenses andAccessories ﾷ On Camera Video Lighting ﾷ Camcorder Accessories ﾷVideo Printers / Editors & Backup ﾷ Guides on Using Video CamerasRemote Video Camera Systems ﾷ Hands Free Action Cameras ﾷSurveillance & Remote Systems Video Recording Media ﾷ VideoMemory Cards ﾷ Video Tapes ﾷ DVDs / CDs / Optical Media ﾷ HeadCleaning Tapes/Tape Adapters ﾷ Audio Tape DeskTop Video Editingﾷ TurnKey Editing Systems ﾷ Editing Hard Drives & RAID ﾷEditing Systems ﾷ Editing Accessories ﾷ CD / DVD Creators &Accessories ﾷ Video/DV Backgrounds

Computer Hardware and softwareﾷ Notebooks / Laptops ﾷ Ultrabooks ﾷ NetBooks ﾷ iPads ﾷ Tablets ﾷReplacement Batteries ﾷ Upgrades ﾷ Power Accessories ﾷScreen/Body Protection ﾷ Notebook/Netbook/Tablet Accessories ﾷiPad Accessories Desktop Systems ﾷ Computers ﾷ ComputerMonitors ﾷ Network Storage & Servers ﾷ Network Switches / Routers/ Firewalls ﾷ Network Accessories ﾷ Desktop Upgrades ﾷ Power /Cooling / Mounting & Lighting Printers and Accessories ﾷ Home &Office Inkjet Printers ﾷ Multifunction Inkjet Printers ﾷ Wide Format

Inkjet Printers ﾷ Laser Multifunction PrintersColor ﾷ LaserMultifunction PrintersMonochrome ﾷ Laser PrintersColor ﾷ LaserPrintersMonochrome ﾷ Dye Sublimation Printers ﾷ Impact &Thermal Printers ﾷ Receipt & Validation Printers ﾷ Accessories forPrinters Inks / Toners & Media ﾷ Dye Sub Ribbons And Media ﾷInkjet Inks ﾷ Inkjet & Laser Printer Paper & Specialized Media ﾷRibbon Cartridges ﾷ Solid Ink Cartridges ﾷ Thermal Paper Rolls &Sheets ﾷ Toner Cartridges

Increased Performance

Decreased Injury

Drug Free Pain Relief

Call Us : 877.542.0761 | Or Visit Us At: www.multiradiance.com

We thank you for your service.

Military Bases Military Academies VA HospitalsMilitary Clinics

®TM

A Proud Partner and supplier of Super Pulsed Lasers for :

Multi Radiance Medical

Eliminate the hassle of throwing away

paper towels, time and money.

Clean + Rinse + Dry = A Sink That Makes Sense

| 1.800.BRADLEY | www.BRADLEYCORP.com/Advocate

We kept it pretty simple. A sink with the soap dispenser, faucet and hand

dryer side-by-side. With a more efficient, completely touchless sink,

the Advocate gives users more personal space, while keeping water

off the floor. This is the cleaner, simpler way to wash.

rethink the way you wash

Exclusively Bradley

success.built for your ShopBot CNC tools are

From the small-footprint, power-packed Desktop to ShopBot’s full-size gantry tools, 96 X 48 and larger, ShopBot has the right CNC tool ready for you. Designed, built, and fully supported here in the USA, ShopBot Tools has been making wood shops more productive for 19 years.

We’re more than just tool makers, we’re problem solvers.Above and beyond the high quality of our CNC tools, we have created, and are constantly building upon, a suite

of resources and services that support your success. Learn more at www.shopbottools.com/solutions

CNC Tools • Production Support • Training • Tech Support • Community

Give ShopBot Tools a call and let's talk it through. We’ll find the best CNC tool for you and customize your production set up.

ShopBot Desktop ShopBot Buddy®

5-Axis Tool

ShopBotTools.com888-680-4466 •

Full Size Tools

EXPERIENCE OUR RED CAPE® COMMITMENT.Taylor® frozen dessert equipment treats you to big

profi t opportunities. From rich ice cream indulgences

to fast growing, wholesome frozen yogurt, Taylor frozen dessert

equipment adds versatility to your menu. Partner with Taylor

to help maximize your profi ts and success.

S W E E T T R E A T S

SWEET TRENDS

SWEET SALES

w w w . t a y l o r - c o m p a n y . c o m8 0 0 . 6 7 8 . 7 0 8 4Our Red Cape® Commitment:

WE GO BEYOND. SO YOU RISE ABOVE.

New World Case, Inc. 10 River Road Uxbridge, MA 01569

www.specialtytowerlighting.com

High Quality Obstruction LightingFAA Certified

HEIGHTS

www.qualitytowerservices.com

Tower Installations/Erections,Maintenance and Removals

www.specialtydrilling.com 713.722.8273 713.722.9119 713.722.8290

Turn-Key Tower FoundationsComplete Drilling ServicesAnchor Bolt Placement, Rebar,Concrete and Forming

SPECIALTY

FEATURES AND BENEFITS• Palmero’s DisCide series offers your clients a full lineup of highly effective,fast-acting, hospital-level disinfectants • DisCide ULTRA is a one-step, quaternary ammonium, high-level, alcohol-baseddisinfectant that’s laboratory-proven to kill deadly pathogens in one minute1

• Offered in a spray, foam, aerosol or towelette — as well as in economicalbulk-refill packaging — DisCide ULTRA is noncorrosive and nonstaining,and leaves behind a pleasant herbal scent with no unsightly residue• This product is registered with the U.S. Food and Drug Administration andEnvironmental Protection Agency and meets the disinfection requirementsof the federal Occupational Safety and Health Administration’s (OSHA)Bloodborne Pathogens Standard• Palmero also offers professional-grade hand soap and hand wipes withbroad-spectrum antimicrobial properties and skin-soothing aloe vera andvitamin E• DisCide Effect Professional Hand Asepsis Soap removes stubborn dirt, grease and bacteria without irritating sensitive skin, while its fresh almondscent encourages staff compliance with hand-asepsis guidelines• Formulated to kill 99.9% of disease-causing microbes, DisCide XRA hand-sanitizing wipes are nonirritating and safe, yet meet OSHA andU.S. Centers for Disease Control and Prevention handwashing standards

BOTTOM LINEDesigned to expedite operatory turnover, Palmero’s DisCide line offers a choice of hospital-level disinfectants and hand-hygiene products that are ideal foroperatories, central sterilization rooms and general office use. From fast-acting DisCide ULTRA to bactericidal soaps and hand wipes, clinicians will find theseproducts to be economical and effective additions to their asepsis protocols.

SPOTLIGHT ON infection preventionProduct Profile

800/344-6424palmerohealth.com

APRIL 2015 MentorIsSalesPower.com MENTOR 39

Infection Control Lineup Offers Fast-Acting Asepsis Solutions

HOW DO YOUR CLIENTS’ DISINFECTANTS RATE?Palmero’s DisCide ULTRA disinfecting towelettes and DisCide ULTRA disinfectingspray meet stringent federal Environmental Protection Agency (EPA) standards forefficacy against Staphylococcus aureus, Pseudomonas aeruginosa andMycobacteriumbovis, and are also effective against the Ebola virus and Enterovirus D68.

Visit the EPA’s website for more information: epa.gov/oppad001/atp-product-list.pdfepa.gov/oppad001/list-l-ebola-virus.html

Sales professionals can request samples at palmerohealth.com/requestsamples— and be sure to mention Mentor.

CONTACT

Infection prevention products from Palmero Health Care

FOOTNOTE1. Kills tuberculosis (Mycobacterium bovis or TB), methicillin-resistant Staphylococcus aureus(MRSA), HIV-1, AIDS virus, H1N1-Pandemic 2003 influenza A virus, hepatitis B virus (HBV),hepatitis C virus (HCV), vancomycin-resistant Enterococcus faecalis (VRE), respiratorysyncytial (RSV), H3N2 avian influenza A virus, influenza A virus (Hong Kong), adenovirus,herpes simplex virus type 2 (HSV-2), coronavirus, Pseudomonas aeruginosa, Salmonellaenterica, Staphylococcus aureus, Escherichia coli (E. coli), athlete’s foot fungus and more.

Sj,\||MWAGER

Whether your housing project needs mailboxes for two or two-thousand residents, Florence has the most extensive selection in the industry. Don’t get trapped with limited options, let our dedicated team partner with you to develop a custom solution built on your needs. . .not what is in stock.

Design and construction professionals have relied upon the secure, first-class design of Florence’s

centralized mailboxes since 1934. Let us help take your centralized mail delivery concept from the drawing board to reality, providing you with the perfect mailbox solution.

Don’t get trapped in a box...

...we have the perfectmailbox solution.

800.275.1747Call Florence Today Toll-free

florencemailboxes.comVisit Us Online For More Info

Made in AmericaProud to Say Our Products Are

IPG® introduces ALF301, approved by the military for use on multi-million dollar weapon systems and specifically designed to meet the most demanding masking application in the Aerospace industry, chemical de-paint. The aggressive pressure sensitive adhesive provides a chemical resistant seal to clean, dry surfaces. Used for protective masking during chemical de-paint (stripping) on commercial and military aircrafts, as well as temporary field repairs until the aircraft can be returned to an MRO base and as an underlayment for PMB tapes when needed.

TM

i tape with

U S AMADE IN THE

THE NEXT GENERATION IN CHEMICAL RESISTANCE.

Other IPG® Products for the Aerospace Industry:

1-1-8

SAE-AMS-T23397 Type I and II TO Manual 1-1-8 NSNs listed GSA Listed

Scan to learn more about IPG’s products for the Aerospace Industry!

Meeting The Following Certifications:BAC D6-1816 BAC D6-34501, rev. HSAE-AMS-T-23397BSAE-AMS-T-21595 (1)UL-723ASTM E84CID AA-180CUU-T-91E

ALF301-Aerospace_ad.indd 1 8/22/14 2:11 PM

Alghanim Industries, named one of Hewitt Associates Best Employers in Middle East 2009, is one of the largest, privately-owned companies in the Gulf region.

A multi-national company in outlook with operations in 40 countries, Alghanim Industries is a multi-billion dollar conglomerate with more than 30 businesses.

Alghanim Industries has a 75+ year heritage as a successful commercial enterprise in the Gulf region, with a proven track record of reacting to economic and market changes.

Yusuf Ahmad Alghanim & SonsAlghanim IndustriesShuwaikhKuwait 13003

Email:

[email protected] Free:

965-1881111Fax:

965-24969886Website: www.alghanim.com

Passenger Car Rental & Leasing

9.3 Million jury verdict against Hospital2007 hospital visit was prompted by a urinary tract infection.

While in the hospital, patient contracted MRSA, a bacterial infection that is usually resistant to antibiotics.

Patient remained in the hospital for 75 days

DisCide ULTRA by Palmero Health CareAvailable in towelettes, spray and gallon re�ll. Palmero’s DisCide ULTRA is the only hospital-quality, one-step, ready to use quaternary ammonium, high-level alcohol-based disinfectant that is laboratory-proven to kill deadly pathogens* in1 MINUTE OR LESS!

4 OZ. Quart

W/ Sprayer

Gallon

*Kills Tuberculosis (Mycobacterium bovis or TB), Methicillin-resistant Staphylococcus aureus (MRSA), HIV-1, AIDSvirus, H1N1-Pandemic 2003 In�uenza A virus, Hepatitis B virus (HBV), Hepatitis C virus (HCV), Vancomycin-resistantEnterococcus faecalis (VRE), Respiratory Syncytial (RSV), H3N2 Avian in�uenza A virus, In�uenza A virus (Hong Kong), Adenovirus, Herpes simplex virus type 2 (HSV-2), Coronavirus, Pseudomonas aeruginosa, Salmonella enterica, Staphylococcus aureus, Escherichia coli (E. coli), Athlete’s foot fungus and more.

It’s registered with the U.S. Food and Drug Administration and Environmental Protection Agency, and it meets the disinfection requirements of the federal Occupational Safety and Health Administration’s (OSHA) Bloodborne Pathogens Standard

Contact:Palmero Health Care(800) 344-6424www.palmerohealth.com

60 Count: 10.5 x 10

Towelettes120 Count 6 X 6.75

Disinfectant Provides Quick Kill Times

Prevent this from happening to your facility!

nEWSU.S. Army Awards Lockheed Martin $78 Million Contract for ATACMS Modernization ..............................................9Raytheon and General Dynamics Joint Venture Awarded U.S. Air Force Launch and Test Range Contract ...............11Northrop Grumman Wins ICBM Ground Subsystems Support Contract with Potential Value of $963.5 Million ......13L-3 Acquires MITEQ, Inc. ...................................................................................................................................................15NASA, Boeing, SpaceX Outline Objectives to Station Flights ....................................................................................17Raytheon Acquires Tucson-Based Sensintel, Inc. .........................................................................................................19Exelis Wins Interim Redesign Contract for U.S. Navy’s Tactical Jammer ................................................................23L-3 Communications Wins Two NSA Contracts Valued at $367 Million .................................................................................... 25BAE Systems Providing Radio Communications Integration Support for New U.S. Navy Ships .......................27Digital Modular Radios by General Dynamics Quadruples U.S. Navy Network CommunicationsCapacity with New Software ..........................................................................................................................................29Harris Corporation to Acquire Exelis – Complementary, Adds Scale, and Strengthens Core Franchises ...........31Army Awards Lockheed Martin $82 Million Sustainment Contract for Apache Targeting/Night Vision System .....33GE Successfully Tests World’s First Rotating Ceramic Matrix Composite Material for Next-Gen Combat Engine ..................................................................................................................................................................35Cubic Recognized as a Superior Supplier to the U.S. Army by the U.S. Department of Defense ..................................37Northrop Grumman Wins Contract to Support Critical IRS Infrastructure ....................................................................41U.S. Army Space & Missile Defense Command Selects BAE Systems to Provide Critical Readiness Support .............43 Boeing System Could Bring Precision to Laser Weapons on U.S. Navy Ships ................................................................45General Dynamics Awarded $50 Million for Abrams Tank Production ..........................................................................47Exelis Receives $7.6 Million Contract to Provide U.S. Army On-the-Move Connectivity with Low Profile Satellite Antennas ................................................................................................................................................................49Raytheon Team Tests New Global Capability to Help Improve U.S. Army Readiness ...................................................51Lockheed Martin Awarded Contracts to Support U.S. Navy Cross Domain Intelligence Sharing Solution ..................53

EvEntS & tRADE SHoWSGovernment Procurement Conference ..............................................................................................................................57AeroDef Manufacturing 2015 .............................................................................................................................................59SPIE Defense + Security 2015 .............................................................................................................................................61Unmanned Systems 2015 ....................................................................................................................................................63Space Tech Expo ..................................................................................................................................................................65

tRAvEl GuiDE foR BuSinESS PRofESSionAlSAtlanta, Georgia ..................................................................................................................................................................69

table of Contents

• A full-line manufacturer of HVAC air filters

• 4 manufacturing facilities strategically placed

to reduce shipping costs

• Products that earn LEED Green Building points

• Free site survey and system analysis

• Energy Savings Life Cycle Tool

• Spec• Special Tagging / Labeling

• Filtration training seminars / webinars

• Energy Star partner

• NAFA Clean Air Certification

MADE IN THE USA

GSA Schedule GS-07-9155S

Regina McAnallyBuisness Development

625 W. Hill StreetLouisville, KY 40208

(800) [email protected]

For a quote or to schedule your site visit contact

[email protected]

Typewritten text

Textile Source Book for Government Purchasing

The inventive minds at A. O. Smith are bringing you more options for your

hot water demands than ever before! From standard water heaters to

innovative gas, electric, solar and hybrid technologies, A. O. Smith has the

right water heater to fit the needs of any lifestyle.

For more information on all the water heaters A. O. Smith has to offer, visit www.hotwater.com.

THE ULTIMATE SOURCEFOR HOT WATER SOLUTIONS

More options. Including the right one for your next job.

voltex® 50-galloN heat puMp WateR heateR•Highest energy efficiency on the

market at 2.75 EF

•11% more efficient than other ENERGY STAR Heat Pumps

•$393 annual savings compared to standard models

taNKleSS•Designed with higher quality

materials for fewer call-backs

•Highly efficient (up to .95 EF)

•Industry-leading 15-year warranty

CyCloNe® Mxi CoMMeRCIal WateR heateR•Up to 98% thermal efficiency dramatically

lowers operating costs

•Modulating models adjust firing rate to the specific demand, further increasing efficiency and money savings

•Our exclusive advanced electronic control with built-in diagnostics is network ready for remote monitoring

14-AOS-0025 M3jmd Johnson Sales Flyer Ad - 7.44x10.25.indd 1 7/22/14 11:12 AM

DEMAND! DEMAND! DEMAND!Protection! Protection! Protection!

That is what DisCide Ultra offersYOU!

See what EPA had to sayAs shown on the EPA’s list, Palmero Health Care’s

DisCide Ultra Disinfecting Towelettes and DisCideUltra Disinfecting Spray ACHIEVED the Agency’s

stringent e�cacy performance standards againstStaphylococcus aureus, Pseudomonas aeruginosa,

and Mycobacterium BCG (tuberculosis bacteria)and are con�rmed as an e�cacious hospital disinfectants.

HOW DID YOUR DISINFECTANT RATE?Visit EPA website for more info

http://www.epa.gov/oppad001/atp-product-list.pdf

Request a free samplehttp://www.palmerohealth.com/requestSamples 800-344-6424

Kills over 21 Microorganisms! Kills in1 minute or less!

No mixing easy to use!

www.ListIndustries.com 1-800-776-1342

Lockers

Cabinets

Shelving

More Than 500,000 Installations Worldwide

Industry Leader in: Design Innovation Quality Warranty

Made in America

Since 1936

PROTECTINGUSTHOSE WHO PROTECT

I375NAV Stearns® Inflata-Belt™ Max - Manual

I446 Stearns® U.S. Navy MK-1 Inflatable vest

I

II I ®

I

I580 Stearns® Coreguard™ B Anti-Exposure Coverall

Contact: Riika JorgensenNational Account [email protected] I 757.675.9367

®

I077 Stearns® Powerboat™ Jacket

MADE IN THE

USA

Food WasteDisposers andthe Environment

www.insinkerator.com/environmental

Using an InSinkErator food waste disposer is both practicaland environmentally responsible.

• Disposers divert solid waste from landfills, reducing greenhouse gas emissions

• At the wastewater treatment plant, food waste can be recycled into energy and the biosolids processed into fertilizer*

1

2

3

4

Food Waste is Ground in Disposer

Waste Flows to Modern Wastewater Treatment Facility

• Methane Gas Can Be Captured and Recycled for Use at Power Plant / Other Facilities

• Biosolids Can Be Captured and Turned into Fertilizer

Fertilizer Can Be Created from Biosolids Applied to Agricultural Land

Land Produces Food and Cycle Begins Again

* Check the plant in your area.

Trust over 50 years of dental innovation.

Ask your local dental dealer for a product demo.To learn more about our wide variety of award winningdental products, visit www.airtechniques.com.

“I’ve trusted A/T for over 18 years, and I trust them more now than ever.

Over 18 years ago, I purchased a VacStar® evacuation system, a ScanX® Classic flexible phosphor

sensor digital radiography system, and then an AirStar® compressor. They’re all still going strong.

I added a Spectra® Caries Detection Aid, a Polaris® Intraoral Camera, and a new ScanX Classic.

My patients love Spectra and how it lets us practice less invasive dentistry by finding decay at early,

easy-to-treat stages. Polaris gives me exceptional image quality, and ScanX takes radiographs of

digital solution.

I’ve been a big A/T fan since 1995, and I’ve never been a bigger fan than I am today.”

&Me

#1 in a Series

“From the back room to the operatory, A/T has me covered.”

Gerald Grossman, DDSWestbury, New York

WIN A NEW A/T Air Compressor or Vacuum System!For more information, go to

www.airtechniques.com or scan QR code.

Expires 9.30.14

MERCHANDISEIMAGING UTILITY ROOM

∙ optomap presents at least 50% more visible retina than any other ultra-widefield product1

∙ DICOM workflow manages unique patient identifying information associated with patient imaging sessions

∙ Optos California and Daytona are VistA imaging approved modalities

∙ Clinically supported by more than 300 studies

Contact us to find out more at 800-854-3039 or [email protected]

optos.com

Building The Retina Company

optomap is ultra-widefield retinal imaging.

1 Kiss et al. Comparison of ultra-widefield fluorescein angiography with the Heidelberg Spectralis® noncontact ultra-widefield module versus the Optos® optomap. Clin Ophthalmol. 2013, 389-94.

GSA Contract #V797D-30201

optomap® ultra-widefield color image optomap® af ultra-widefield autofluorescence image

P IONEER ING T ECHNOLOGY200 DEGREE R E T INAL IMAG ING

DOD GSA Ad_F_052015_FULLPAGEad 5/20/15 12:41 PM Page 1

Design & Creative Copyright ©2012 SLA Service Management

Backwall Concept FINAL 10/8

• A full-line manufacturer of HVAC air filters

• 4 manufacturing facilities strategically placed

to reduce shipping costs

• Products that earn LEED Green Building points

• Free site survey and system analysis

• Energy Savings Life Cycle Tool

• Spec• Special Tagging / Labeling

• Filtration training seminars / webinars

• Energy Star partner

• NAFA Clean Air Certification

MADE IN THE USA

GSA Schedule GS-07-9155S

Regina McAnallyBuisness Development

625 W. Hill StreetLouisville, KY 40208

(800) [email protected]

For a quote or to schedule your site visit contact

High Temperature Products Since 1971

TECH SUPPORT I CUSTOM FORMULATIONS I QUANTITY PRICING

131 47th Street, Brooklyn, New York 11232-4225Call: 718.788.5533 Fax: 718.788.5538 Email: [email protected] Web: www.cotronics.com

HIGH TEMPERATURE MATERIALS FOR

Flexible Conductive Silver Based EpoxyDuralco™ 125 thermally conductive electrical epoxy bonds to most metals, ceramicsand plastics to form a stress-free adhesive bond. Continuous service up to 450ºF.

High Expansion AdhesiveThermeez™ 7030 bonds and protects to 1800ºF. Apply toceramics, ceramic cloths, door and tadpole gaskets andmetals. Excellent adhesion to steel, stainless, aluminum,lead and ceramics.

High Purity, Alumina Adhesive Protects Critical Electronic Components Resbond™ 989 offers continuous protection to 3000ºF. Apply directly to metals, glass,ceramics, graphite and silicon carbide. Provides high bond strength and excellentelectrical, moisture, chemical and solvent resistance for bonding and sealing.

You have challenging applications… we have solutions!

Thermally Conductive AdhesivesDuralco™ 132 thermally conductive adhesives combineCotronics’ unique, high temperature resins with highlyconductive fillers to form thermally conductive, adhesivebonds with continuous service up to 500ºF.

High Temperature Low Expansion AdhesiveResbond™ 905 Quartz is formulated for bondng low expansion and thermal shock resistant ceramics. Ideal forelectronic and metallurgical applications to 2500ºF.

ELECTRICAL l STRUCTURAL l INDUSTRIAL lMEDICALAPPLICATIONS TO 4000ºF

Cotronics_FederalBG_2015_Federal BG PG 1/15/15 9:38 AM Page 1

News

U.S. Army Awards Lockheed Martin $78 Million Contract for ATACMS Modernization

January 7, 2015 DALLAS, TX -- Lockheed Martin received a $78 million contract from the U.S. Army for upgrades to the Army Tactical Missile System (ATACMS). The program will take hardware from early-production ATACMS Block 1 missiles and develop an enhanced and affordable weapon system capable of eliminating targets without the risk of unexploded ordnance, which meets the U.S. Army’s long-range precision strike requirement. The program’s first phase will include flight tests, followed by production beginning in 2016. Work will be performed at Lockheed Martin facilities in Camden, Arkansas, and Dallas. “ATACMS is extremely reliable and effective, and has proven itself over and over again in combat,” said Ken Musculus, vice president of Tactical Missiles for Lockheed Martin Missiles and Fire Control. “These upgrades ensure ATACMS is ready to meet our customers’ needs now and in the future.” As the U.S. Army’s only tactical long-range precision strike surface-to-surface weapon, ATACMS provides critical military capabilities. More than 560 ATACMS missiles have been fired in combat and the system has demonstrated extremely high rates of accuracy and reliability. Each ATACMS missile is packaged in a Guided Missile Launch Assembly pod and is fired from the Multiple Launch Rocket System (MLRS) family of launchers. Lockheed Martin has produced more than 3,700 ATACMS missiles, with more than 20 years of on-time deliveries. The company’s Camden Operations has received more than 60 awards over the last decade, including the 2012 Malcolm Baldrige National Quality Award and the Shingo Silver Medallion Award for Operation Excellence.

Easy-to-Use Disinfectants

Palmero’s infection control line helps streamline operating room turnover

We carry several types of disinfectants As a medical sales professional, what are the key talking points I should know about Palmero’s DisCide line?Available as a spray, foam, aerosol or towelette, and our DisCide Ultra liquid comes in Gallon refills. Palmero’s DisCide disinfectants offer your clients ready-to-use, fast-acting, hospital-quality products that are designed to expedite operating room turnover. Each of these products is ideal for use in the centralsterilization room and office areas, as well.

FAQ how DisCide can help streamline their infection control processing?DisCide ULTRA is a one-step, quaternary ammonium, high-level, alcohol-based disinfectant that’s laboratory-proven to kill deadly pathogens in one minute.* Offered in a towelette and spray, DisCide ULTRA is noncorrosive and nonstaining, and leaves behind a pleasant herbal scent with no unsightly residue. It’s registered with the U.S. Food and Drug Administration and Environmental Protection Agency, and it meets the disinfection requirements of the federal Occupational Safety and Health Administration’s (OSHA) Bloodborne Pathogens Standard.

So what’s the �nal takeaway?Palmero’s DisCide line offers a choice of ready-to-use, hospital-quality disinfectants that are easy to use. Products that are ideal for hospitals and medical offices. From fast-acting DisCide ULTRA to clinicians will find theseproducts to be economical and effective choices to meet all of their infection-control needs.

REFERENCE* Kills tuberculosis (Mycobacterium bovis or TB), methicillin-resistant Staphylococcus aureus (MRSA), HIV-1, AIDSvirus, H1N1-Pandemic 2003 in�uenza A virus, hepatitis B virus (HBV), hepatitis C virus (HCV), vancomycin-resistantEnterococcus faecalis (VRE), respiratory syncytial (RSV), H3N2 avian in�uenza A virus, in�uenza A virus (Hong Kong),adenovirus, herpes simplex virus type 2 (HSV-2), coronavirus, Pseudomonas aeruginosa, Salmonella enterica,Staphylococcus aureus, Escherichia coli (E. coli), athlete’s foot fungus and more.

,

4 oz. bottle Gallon re�llQuart with sprayer

160 count, 6" x 6¾" towelettes

www.palmerohealth.com

FREE SAMPLE DisCide Ultra

• 1 Minute hospital level, one-step, disinfectant• Kills over 21 deadly pathogens* in 1 minute or less• Kills 99.99% Germs!• Ready-to-use quaternary ammonium, high-level disinfectant• One of the fastest kill time on the market• Laboratory-proven to kill deadly pathogens*• EPA-registered 10492• FDA-registered 1219113

Fax request to 203-377-8988, email request to [email protected] orMail to PHC 120 Goodwin Pl Stfd. CT. 06615Name:__________________________________________________Street:__________________________________________________City:______________________State:______Zip Code:___________

News

Raytheon and General Dynamics Joint Venture Awarded U.S. Air Force Launch and Test Range

Contract

January 9, 2015 DULLES, VA -- The U.S. Air Force has awarded one of its most important space procurements, potentially a multi-billion-dollar contract to operate, maintain, and sustain launch ranges at Florida's Space Coast and Vandenberg Air Force Base in California, to a joint venture of Raytheon and General Dynamics.

The joint venture, called Range Generation Next (RGNext) is responsible for operations, as well as organizational and depot-level maintenance and sustainment for safe and effective launch, testing, and tracking of Department of Defense, civil, commercial, and international spacelift vehicles. It will also support ballistic missile, guided weapon, and aeronautical tests and evaluations. The $1.5 billion, single-award contract has a one-year base period with nine one-year options. Raytheon and General Dynamics formed RGNext to pursue the opportunity, known as the U.S. Air Force Space and Missile Systems Center's Launch and Test Range System (LTRS) Integrated Support (LISC) contract, supporting the U.S. Air Force Space Command. Existing operations and maintenance at the Eastern and Western launch ranges and the engineering and sustainment work for the entire LTRS are being consolidated into LISC, primarily a fixed-price-incentive firm (target) contract. “Together, Raytheon and General Dynamics offer the U.S. Air Force more than 40 years of operations and maintenance experience, along with leadership across information technology domains,” said Lynn Dugle, president of Raytheon Intelligence, Information and Services. “In this cost-sensitive environment, LISC will deliver efficiencies and economies of scale that could not be obtained under separate contracts. Our team is eager to play its part in helping the customer ensure safe mission operations.” “As part of this proven team, General Dynamics Information Technology will leverage lessons learned and proven processes to ensure the ranges continue as the nation's premier launch facilities,” said Dan Johnson, president of General Dynamics Information Technology.

www.terex.com

© Terex Corporation 2015 · Terex is a registered trademark of Terex Corporation in the United States of America and many other Countries

Parts · Service · Support Financial Services

Aerial Work Platforms · Construction · Cranes · Material HandlingMaterials Processing · Port Solutions · Utilities

Terex Government Programs150 Riverside Parkway, Suite 203Fredericksburg, VA 22406

Office: 540 361 7755Fax: 703 997 [email protected]

DUNS: 618467547 / CAGE CODE: 4J2G1

SERIOUS PROJECTS DEMAND HIGH-CALIBER TOOLS

C

M

Y

CM

MY

CY

CMY

K

Terex Government Programs 8.5 x 11 print.pdf 1 3/27/2015 8:17:23 AM

News

Northrop Grumman Wins ICBM Ground Subsystems Support Contract with Potential

Value of $963.5 Million

January 15, 2015 HERNDON, VA -- The U.S. Air Force has awarded Northrop Grumman Corporation a contract for the support of Minuteman III Intercontinental Ballistic Missile (ICBM) Ground Subsystems. Northrop Grumman is the sole award recipient for the indefinite delivery/indefinite quantity contract that is worth $963.5 million, with an initial award value of approximately $4.4 million. The work will be performed by Northrop Grumman personnel at Hill Air Force Base, Utah; Omaha, Nebraska; Vandenberg Air Force Base, California; and San Bernardino, California. “Northrop Grumman continues a 50-plus year partnership with the U.S. Air Force on ICBMs,” said Steve Hogan, sector vice president and general manager, Integrated Logistics and Modernization division, Northrop Grumman Technical Services. “Our more than 17-year experience as the ICBM prime integration contractor uniquely qualifies us to perform the required operational and sustainment activities that ensure the security, surety and reliability of our nation's ICBM weapon system.” Under this five-year contract, Northrop Grumman will provide program management support, engineering services and emergency response to the U.S. Air Force. This effort encompasses weapon system analyses, system and subsystems assessment, and technical advisement and assistance to the ICBM Systems Directorate on ground systems-related programs, risk management and mitigation. “With our experienced leadership and revitalized workforce, Northrop Grumman will provide the U.S. Air Force with a highly-capable engineering and management support team in an affordable program structure,” said John Parker, director, Weapon Systems Sustainment and Modernization, Northrop Grumman Technical Services. “Our team will assist in continually assessing and sustaining the ICBM ground subsystems segment using our proven, innovative approaches to ensure mission success.”

GROUP

Engineering & Construction

Shipping & Logistics

Security & Border Control

Power, Energy & Oil Field Services

Travel & Visas

Software

Telecom Services

Your reliable partner in the Middle East and Africa

Griffin Ltd. is an International group of companies with operations

since 1997 throughout the Middle East and Africa.

GriffinGroup.com

GROUP

News

L-3 Acquires MITEQ, Inc.

January 22, 2015 NEW YORK -- L-3 Communications announced today that it acquired the assets of MITEQ, Inc. on January 21, 2015 for $41 million, subject to customary adjustments. The business will be combined with L-3’s Narda Microwave-East business located in Hauppauge, N.Y., and the new organization will be called L-3 Narda-Miteq. The Miteq business develops and manufactures specialized RF microwave products and solid-state SATCOM components that complement the existing Narda product line. The combined L-3 Narda-Miteq business will employ approximately 700 people, providing products for the U.S. military, government agencies, prime contractors and commercial customers. The Miteq acquisition is expected to generate approximately $60 million in sales for the year ending December 31, 2015. “Miteq adds key products, technical capabilities and other synergies, strong engineering talent and new customers to L-3’sAdvanced Communications sector within our Communication Systems segment,” said John S. Mega, president of L-3 Communication Systems. “Together, Narda-Miteq is a stronger and more scalable supplier that creates cross-selling opportunities and helps us build strategic partnerships with our expanding customer base.” Miteq offers a broad product line of active and passive RF microwave components and low-power SATCOM products for space and military applications. The RF microwave product line includes low-noise and power amplifiers, mixers, solid-state switch assemblies, synthesizers, oscillators and multipliers. SATCOM products include components for airborne and Earth Stationsystems, as well as solid-state power amplifiers, low-noise amplifiers, uplink power control units and frequency converters.

News

NASA, Boeing, SpaceX Outline Objectives to Station Flights

January 26, 2015 KENNEDY SPACE CENTER, FL -- American spacecraft systems testing followed by increasingly complex flight tests and ultimately astronauts flying orbital flights will pave the way to operational missions during the next few years to the International Space Station. Those were the plans laid out Monday by NASA’s Commercial Crew Program

officials and partners as they focus on developing safe, reliable and cost-effective spacecraft and systems that will take astronauts to the station from American launch complexes. According to Boeing, the company’s schedule calls for a pad abort test in February 2017, followed by an uncrewed flight test in April 2017, then a flight with a Boeing test pilot and a NASA astronaut in July 2017. SpaceX said they anticipate a pad abort test in about a month, then an in-flight abort test later this year as part of its previous development phase. An uncrewed flight test is planned for late 2016 and a crewed flight test in early 2017. Speaking for the first time together since the awarding of the final development and certification contracts, officials from NASA’s Commercial Crew Program, Boeing and SpaceX revealed some of the details of their plans to cross the chasm from spacecraft and launch system design to flight tests, certification and operational missions to the station. “It’s an incredible testament to American ingenuity and know-how, and an extraordinary validation of the vision we laid out just a few years ago as we prepared for the long-planned retirement of the space shuttle,” said Charlie Bolden, NASA administrator, during the briefing at the agency’s Johnson Space Center in Houston. “This work is part of a vital strategy to equip our nation with the technologies for the future and inspire a new generation of explorers to take the next giant leap for America.” Boeing and SpaceX were selected in September 2014 to finalize their respective CST-100 and Crew Dragon spacecraft along with the rockets that will lift them into orbit and all of the ground and mission operations networks essential for safe flights. Both companies have worked with NASA’s Commercial Crew Program throughout multiple development phases, continuing to

advance their designs before being chosen to complete their systems, reach certification and then fly astronauts to the station. The goal of NASA’s effort is to provide an American launch vehicle and spacecraft capable of safely carrying astronauts to the station. Unlike other NASA spacecraft, though, this new generation of human-rated vehicles will be designed, built, operated and owned by the companies themselves, not NASA. NASA will buy space transportation services from the companies for astronauts and powered cargo. It will be an arrangement like the one the agency uses already with the Commercial Resupply Services initiative that uses privately developed and operated rockets and spacecraft to deliver critical cargo to the station. “There are launch pads out there already being upgraded and there is hardware already being delivered,” said Kathy Lueders, manager of the Kennedy Space Center-based Commercial Crew Program. “Both companies have already accomplished their first milestones.” The new spacecraft will allow the station's crew to expand to seven astronauts and cosmonauts, which means twice as much time for research aboard the one-of-a-kind scientific platform – 80 hours a week instead of the current 40. Also, the handoff of flight to low-Earth orbit will permit NASA to pursue the challenges of deep space exploration and the journey to Mars with the Space Launch System rocket and Orion spacecraft. Boeing and SpaceX each proposed a set of objectives and milestones that suits their development, testing and flight plans. NASA’s role is to evaluate progress and make sure it meets stringent safety requirements, including a safe launch abort system built in to provide astronauts a means of escaping a potentially catastrophic situation. The agency placed a premium on giving providers the freedom to come up with innovations in design, manufacturing and testing. Ultimately, NASA expects to have two separate spacecraft and launch systems it can turn to for flights of crew to the station and low-Earth orbit. The companies also can provide space transportation services to private citizens, companies and institutions in what could become a new industry for the American aerospace sector. The STS-135 mission, the final flight of the space shuttle, delivered an American flag to the station as a prize for the first Commercial Crew astronauts to visit the orbiting laboratory. A second flag will be taken to the station and brought back as a symbol of success as well. “When we have both of these flags on the ground with their crews safely returned, we'll all be winners,” Lueders said.

News

Raytheon Acquires Tucson-Based Sensintel, Inc.

January 26, 2015 TUCSON, AZ -- Located in Tucson with approximately 50 employees, Sensintel will become part of Raytheon Company's Missile Systems business. The transaction is not expected to materially impact Raytheon's sales or earnings in the first quarter or full year 2015. Terms of the agreement were not disclosed. “Sensintel's expertise in unmanned aircraft systems solutions makes it a natural fit with Raytheon's Advanced Missile Systems product line,” said Dr. Taylor W. Lawrence, Raytheon Missile Systems president. “The acquisition of Sensintel enhances the growth prospects of our UAS business and the advanced capabilities we can offer our customers.” Sensintel brings additional strong talent, technology, and relationships with the Special Operations Command (SOCOM), Office of Naval Research and U.S. Air Force Research Laboratory to Raytheon and its customers. The company is a leader in expendable remote sensing and UAS engineering, serving both government and commercial customers by optimizing and integrating mission-specific sensors and sub-systems into manned and unmanned platforms. It also provides training, technical and operational support to military, scientific and commercial sectors.

The inventive minds at A. O. Smith are bringing you more options for your

hot water demands than ever before! From standard water heaters to

innovative gas, electric, solar and hybrid technologies, A. O. Smith has the

right water heater to fit the needs of any lifestyle.

For more information on all the water heaters A. O. Smith has to offer, visit www.hotwater.com.

THE ULTIMATE SOURCEFOR HOT WATER SOLUTIONS

More options. Including the right one for your next job.

VOLTEX® 50-GALLON HEAT PUMP WATER HEATER

Highest energy efficiency on the market at 2.75 EF

11% more efficient than other ENERGY STAR Heat Pumps

$393 annual savings compared to standard models

TANKLESS

Designed with higher quality materials for fewer call-backs

Highly efficient (up to .95 EF)

Industry-leading 15-year warranty

CYCLONE® Mxi COMMERCIAL WATER HEATER

Up to 98% thermal efficiency dramatically lowers operating costs

Modulating models adjust firing rate to the specific demand, further increasing efficiency and money savings

Our exclusive advanced electronic control with built-in diagnostics is network ready for remote monitoring

14-AOS-0025 M3jmd Johnson Sales Flyer Ad - 7.44x10.25.indd 1 7/22/14 11:12 AM

• Precise metal and plastic marking capabilities • Generous 24 x 12 or 32 x 20 work area• Power configurations up to 50 watts• Compatible with AutoCAD, Bartender,

Illustrator, CorelDRAW, SolidWorks and more• High-quality, USA-made equipment

To request a brochure, DVD, and samples, contact us at: epiloglaser.com/dod • [email protected] • 888-437-4564

T

Visit epiloglaser.com/dod to see a video of the FiberMark Fusion in action!

Mark a Wide Variety of Materials• Stainless Steel• Titanium• Brass• Anodized Aluminum• Steel• Carbide• Alloys• Many Types of Plastic• And much more

The FiberMark Laser Economical solution for metal and plastic marking.

To learn more about how our technology, process, and service innovations can help your facility meet its goals, contact your Abbott Point of Care or Distribution Representative, or visit www.abbottpointofcare.com and www.piccoloxpress.com.

For in vitro diagnostic use only

Technology I Process I Services

Improving the patient experience just got easier— with the i-STAT® System and Piccolo Xpress®, now available from Abbott Point of Care Lab Solutions. Faster turnaround of lab-quality results to accelerate your clinical decision-making. More ways to increase patient satisfaction.

© Abbott Point of Care Inc.400 College Road East, Princeton, NJ 08540(609) 454-9000 (609) 419-9370 (fax)www.abbottpointofcare.com

i-STAT is a registered trademark of the Abbott group of companies in various jurisdictions.Lab Solutions End User Ad 031433 Rev. A 05/13

Piccolo Xpress® is a registered trademark of Abaxis, Inc.Abaxis Part Number 888-3236 Rev. A

Increase Your Efficiency.Improve Their Experience.

ME

NU AVA ILAB

LE

MO

ST

COMPREHENSIV

E

APIC-1304_JUCM Ad_M2.indd 1 8/2/13 11:44 AM

News

Exelis Wins Interim Redesign Contract for U.S. Navy’s Tactical Jammer

January 26, 2015 CLIFTON, NJ -- Exelis has received a U.S. Naval Surface Warfare Center contract valued at $15.3 million to perform essential sustainment work on the ALQ-99 tactical jamming system. The ALQ-99 is used on the Navy’s EA-6B Prowler and EA-18G Growler electronic attack aircraft. The technology will also be provided to the Australian government through a Foreign Military Sales program, the first time the ALQ-99 has been made available to an international ally. Under the contract, Exelis will redesign three modules—components of the ALQ-99’s universal exciter upgrade shop-replaceable assembly—to extend the service life of the Navy’s principal standoff jammer. As part of the redesign, Exelis will replace legacy application-specific electronic components with modern field-programmable technology, enhancing reliability and the system’s ability to adapt to changing mission needs. The work will also include extensive qualification testing to ensure that the aircraft can operate successfully in challenging environments. “The ALQ-99 is expected to continue supporting the Navy’s electronic attack mission for several years until a next-generation solution is fielded,” said Mitch Friedman, vice president and general manager of the Exelis integrated electronic warfare systems business. “This critical interim support will equip the system to handle the evolving threat landscape and allow U.S. and allied forces to continue dominating the electromagnetic spectrum.” For the first time, this contract combines purchases for the U.S. Navy and the government of Australia through a Department of Defense Foreign Military Sales program. Work is expected to be completed by June 2017. The ALQ-99 is part of a suite of electronic warfare (EW) technologies designed to enable domestic and international customers to perform their critical missions. Leveraging its decades of innovation and experience in the electromagnetic spectrum, Exelis has identified EW as one of the company’s four strategic growth platforms.

Densi ier

X3Cycler

OFR

X3C33 ycle

Xtractor

News

L-3 Communications Wins Two NSA Contracts Valued at $367 Million

January 30, 2015 NEW YORK -- L-3 Communications announced today that its National Security Solutions (NSS) business has been awarded two National Security Agency (NSA) Enterprise Program Management (EPM) contracts worth a total of $367.3 million. The five-year contracts provide systems engineering, acquisition planning, program management and financial management for two of NSA’s major mission areas.

“In this rapidly evolving geopolitical environment, we are very pleased for the opportunity to continue our valued partnership with the National Security Agency as the incumbent on both programs,” said Les Rose, president of L-3 NSS. “Our commitment to providing targeted and affordable solutions enhances our customers’ effectiveness against today’s threats and yields opportunities in meeting tomorrow’s national security challenges.” Together, the maximum ceiling value of both contracts over five years is approximately $1 billion. L-3 National Security Solutions (L-3 NSS) is a prime mission partner to defense, intelligence and government agencies, as well as international and commercial organizations. Its integrated solutions combine best-of-breed technology and proven processes with in-field expertise that crosses the domains of cyber, intelligence, enterprise and mission IT, command and control, Big Data and physical security. L-3 NSS partners with customers, industry and academia to provide mission support and innovations that reduce costs and improve performance at the “speed of need.”

Over 800 installations worldwide use SSR.

Do You?

Naval Vessels | Commercial Vessels | Coastal Surveillance | Oil Platforms | System Integrators

• Will connect currently installed equipment and/or new equipment

• Display all sensor data on one screen

• Connect and share data between Ships, land, mobile and off-shore platforms

• Provide a composite track/s from all sensors

Our Solutions

News

BAE Systems Providing Radio Communications Integration Support for New U.S. Navy Ships

February 2, 2015 ARLINGTON, VA -- The U.S. Navy has awarded BAE Systems a nine-year contract to support radio and communications systems design and integration for 13 surface combatant ships. The initial award is valued at $28.4 million with the total value of the nine-year contract estimated at $187.4 million. Under the DDG VI Radio Communications Systems (RCS) contract, BAE Systems’ experts will provide systems engineering, production, and integration for 12 DDG 51 Arleigh Burke-class guided missile destroyers and one DDG 1000 Zumwalt-class guided missile destroyer. The company has held the RCS contract since 1985. “We have a hard working and dedicated team of experts that has worked on every DDG 51 class destroyer in the U.S. Navy’s fleet, including most recently the USS John Finn,” said DeEtte Gray, president of BAE Systems’ Intelligence & Security sector. “That’s 63 new ships over 29 years.” The work is being completed as part of the Navy’s new construction program, which is designed to field advanced capability new surface combatant ships for the U.S. Naval fleet.

Do You Know How Productive Your Employees Are?!"#$%"&'()*+),%-.)(+"/$#%*&,%#$)%&)),%0-(%1-()%02)3"42)%()5-(#"&/6%'-15*&")+%*()%()78"("&/%+-28#"-&+#$*#%'*&%)00)'#".)29%#(*':%)152-9))%#"1)%;%*##)&,*&')%*&,%2*4-(%'-+#+<%=*4*%!-(:0-(')%>-28#"-&+%"+%*%/2-4*2%+-28#"-&+%5(-.",)(%#$*#%,-)+%?8+#%#$*#@%A8(%B8#-C"1)D%+-28#"-&%"+%+'*2*42)%*&,%,)2".)(+%)00)'#".)#--2+%0-(%1)*+8("&/%E-(:0-(')%5(-,8'#"."#9%*&,%2*4-(%'-+#+<

=*4*%!-(:0-(')%>-28#"-&+FGHI%J<%K-11)(')%L*(:E*9%%%%M"(*1*(6%NO%FFGPIQIR<RHS<HTPG%%%%"&0-<8+U:*4*<'-1EEE<:*4*V4)&W"&/V8+*<'-1

News

Digital Modular Radios by General Dynamics Quadruples U.S. Navy Network Communications

Capacity with New Software

February 4, 2015 FAIRFAX, VA -- General Dynamics’ four-channel Digital Modular Radios (DMR) are being upgraded with high-frequency dynamic routing (HFDR) software to turn the radio's four channels into eight virtual channels. In addition to HFDR, the new high-frequency virtual channel exploitation software expands the DMR's communications capacity to16 virtual channels when operating in the high frequency (HF) line-of-sight and ultra-high frequency (UHF) satellite communications frequencies. With the two new software upgrades, the U.S. Navy has four-times more capacity for secure HF communications without adding additional hardware or changing the configuration in space-constrained shipboard radio rooms. The Navy began equipping surface and subsurface ships and a number of land-based locations with the DMR in 1998, and there are currently 500 secure, four-channel DMR radios supporting Navy operations worldwide. Chris Marzilli, president of General Dynamics Mission Systems, said, “As the first software-defined radio to be used by the U.S. military, DMR continues to produce long-term cost-effectiveness for the Navy because these technology advancements use software, avoiding time-consuming and cost-intensive hardware replacements.” General Dynamics engineers are also working to integrate the new Mobile User Objective Systems (MUOS) waveform into the DMR radios. The waveform is the digital dial tone needed to connect to the U.S. military's new narrowband MUOS satellite communications system. Once the MUOS network is operational, Navy personnel will experience the global reach, voice clarity and connection speeds similar to their cell phones they use at home. Built using open architecture standards, the DMR radios will continue to provide improved functionality and interoperability while accommodating next-generation communications waveforms like MUOS, the Integrated Waveform and future advanced network communications waveforms.

News

Harris Corporation to Acquire Exelis – Complementary, Adds Scale, and Strengthens

Core Franchises

February 6, 2015 MELBOURNE, FL -- Harris Corporation and Exelis, Inc. today announced a definitive agreement under which Harris will acquire Exelis in a cash and stock transaction valued at $23.75 per share, or an approximately $4.75 billion enterprise value. The agreement has been unanimously approved by the Boards of Directors of both companies. The transaction is expected to close in June 2015 and is subject to customary closing conditions, including regulatory and Exelis shareholder approval. Under the terms of the transaction, Exelis shareholders will receive $16.625 in cash and 0.1025 of a share of Harris common stock, based on Harris' closing price as of Feb. 5, 2015, for each share of Exelis common stock. Upon closing, Harris shareholders will own approximately 85 percent of the combined company, and Exelis shareholders will own approximately 15 percent. On a pro forma basis for the latest twelve months ended Dec. 31, 2014, the combined company would have had more than $8 billion in revenue and about 23,000 employees globally, including 9,000 engineers and scientists. “Acquiring Exelis is transformational for Harris,” said William M. Brown, chairman, president and chief executive officer of Harris. “The combination of the two companies' highly complementary core franchises creates a competitively stronger company with significantly greater scale. We are expanding in a market, where we have decades of success and a workforce dedicated to providing our customers with innovative and cost-effective solutions for some of their most complex challenges.” “This agreement to become part of Harris Corporation represents an exciting new chapter for Exelis,” said David F. Melcher, chief executive officer and president of Exelis. “Combining the companies not only creates shareholder value, but the commitment to excellence and innovation that both companies share will significantly benefit customers and provide new opportunities for employees.”

magenta

LM-19053_Labyrinth_Ad_v2.indd

LM-19053 Labyrinth Ad.psd background image, vector logos

CC IndesignArchive, News Gothic, Avenir (slug)

12.22.14 2:34 PM

Labelmaster

Labyrinth Ad

8.5"x11"

8.75"x11.25" (bleed) 8"x10.5" (live)

publication

4C

AG xx xx

cyan

yellow

black

WHEN THE MISSION CALLS FOR DG SHIPPING, MAKE SURE NOTHING STANDS IN YOUR WAY.

When you need to ship dangerous goods, Labelmaster is there to answer the call. With fully-customizable products, software and services, we’re here to ensure the DG supplies you ship—from weapons and ammunition to explosives and more—get where you need them. Our experts stay up-to-date on regulations and offer the tools and solutions you need to keep even your toughest shipments moving. Whatever the mission.

DUNS # 117395095 Cage Code # 67634 Labelmaster.com/gsa-contract • [email protected] • 773.279.2343

BLEED 8.75"

TRIM 8.5"

BLE

ED

11.

25"

TRIM

11"

LM-19053_Labyrinth_Ad_v2.indd

LM-19053_Labyrinth_Ad_v2.indd 1 12/23/14 7:05 PM

News

Army Awards Lockheed Martin $82 Million Sustainment Contract for Apache

Targeting/Night Vision System

February 9, 2015 ORLANDO, FL -- Lockheed Martin received an $82 million Performance Based Logistics (PBL) contract in December from the U.S. Army for AH-64 Apache helicopter Modernized Target Acquisition Designation Sight/Pilot Night Vision Sensor (M-TADS/PNVS) system sustainment. The firm, fixed-price contract is the foundation for a comprehensive sustainment solution that enables M-TADS/PNVS mission readiness, reduces operation and

support costs, and drives reliability and maintainability improvements. This is the third of three one-year options that support the initial $111 million PBL contract awarded in 2012. The total four-year contract value was $375 million. “The partnership between the Army Aviation and Missile Command Logistics Center and Lockheed Martin has built a comprehensive logistics solution that consistently meets or exceeds required aircraft readiness rates,” said Rob Breter, Apache PBL senior program manager at Lockheed Martin Missiles and Fire Control. “During its peak operational tempo of more than 200,000 flying hours, the M-TADS/PNVS PBL program averaged a worldwide supply availability rate of 98 percent, increasing mission readiness for the aircrew.” M-TADS/PNVS provides Apache helicopter pilots long-range, precision engagement and pilotage capabilities for mission success and flight safety day or night, or in adverse weather conditions. Forward-looking infrared sensors provide enhanced image resolution that enables Apache aircrews to prosecute targets and provide situational awareness in support of ground troops outside detection ranges. Lockheed Martin has delivered more than 1,300 M-TADS/PNVS systems to the U.S. Army and international customers. The Apache PBL team was honored with the 2011 and 2013 Secretary of Defense PBL Awards recognizing outstanding achievements in providing soldiers with exceptional operational support. The M-TADS/PNVS program received the subsystem level PBL award, which is one of three presented annually to recognize government/industry teams that have demonstrated outstanding achievements.

Perform

NEW SITESCAN & MASTERCSAN

FLAW DETECTOR SERIES

Customizable Menus

Angle Measurement Mode

Field Upgradeable

Encoded B-Scan

16hr Battery Life

Dryscan Option

UT-lity Reporting Software

Choose your hardware:

ApplicationsComposite Inspection

Corrosion Detection

Bond Testing

Weld Fabrication

General UT Inspection

Thickness Measurement

Delaminations

Take a Closer Look

Digital & Phased Array Flaw Detectors , Thickness & Coating Gauges WheelProbe Technologies, Ultrasonic Transducers,

Ultrasonic Scanning Systems, Ultrasonic Couplant, & NDT Accessories

News

GE Successfully Tests World’s First Rotating Ceramic Matrix Composite Material for Next-

Gen Combat Engine

February 10, 2015 CINCINNATI, OH -- GE Aviation successfully tested the world’s first non-static set of light-weight, ceramic matrix composite (CMC) parts by running rotating low-pressure turbine blades in a F414 turbofan demonstrator engine designed to further validate the heat-resistant material for high-stress operation in GE’s next-generation Adaptive Engine Technology Demonstrator (AETD) program currently in development with the United States Air Force Research Lab (AFRL).

The introduction of rotating CMC components into the hottest and hardest-working sections of jet engines represents a significant technology breakthrough for GE and the jet propulsion industry. Prior to the F414 CMC demonstrator, successful CMC applications were limited to static parts, like the high pressure turbine shroud that will be installed on the best-selling LEAP engine, by CFM International, a joint company of GE and Snecma (SAFRAN) of France, in development for the Airbus 320neo, Boeing 737 MAX and the COMAC (CHINA) C919 aircraft. The F414 CMC test – which endured 500 grueling cycles – validated the unprecedented temperature and durability capabilities of turbine blades made from lightweight, heat-resistant CMCs, allowing for expansive deployment of the advanced manufacturing material in GE’s adaptive cycle combat engine and next-gen commercial engines. Because the rotating turbine blades made from CMCs are one-third the weight of conventional nickel alloys used in the high-stress turbine, they allow GE to reduce the size and weight of the metal disks to which the CMCs system is connected. “Going from nickel alloys to rotating ceramics inside the engine is the really big jump. But this is pure mechanics,” said Jonathan Blank, general manager of CMC and advanced polymer matrix composite research at GE Aviation. “The lighter blades generate smaller centrifugal force, which means that you can slim down the disk, bearings and other parts. CMCs allow for a revolutionary change in jet engine design.” GE’s adaptive cycle architecture – the first in which static and rotating CMCs will be deployed -- is revolutionary in its own right. In 2014, GE completed testing the world’s only adaptive three-stream technology demonstrator, called the Adaptive Versatile Engine Technology (ADVENT)

engine. The ADVENT engine is the first in aviation history to combine the CMC material technology with an architecture that transitions from a powerful high-pressure, low-bypass ratio fighter jet engine to a fuel-efficient low-pressure, high-bypass ratio commercial engine. The combination of ADVENT’s revolutionary architectural and material innovations resulted in record-breaking temperature and fuel burn achievements. GE’s AETD program will build on these unprecedented propulsion capabilities to deliver a 25% reduction in specific fuel consumption, 30+ % improvement in range and 10% higher maximum thrust compared to today’s most advanced fifth-generation aircraft. “One of the key challenges in transitioning CMC to rotating components from static components is the stress field in which they must live. The progression of F414 CMC testing has provided key learnings in making this transition happen for our adaptive cycle engine,” said Dan McCormick, general manager of GE Aviation’s Advanced Combat Engine program. “The CMC low-pressure turbine blade is about one-third the weight of the metal blade it replaces, and at the second stage, the CMC doesn’t have to be air-cooled. The airfoil can now be more aerodynamically efficient because it does not need all that cooling air pumping through the middle of it.” “More heat means more cooling air, which reduces overall engine performance and efficiency,” Blank said. “By reducing the need for cooling components, our engine becomes aerodynamically more efficient and also more fuel efficient.” GE’s adaptive cycle engine will be much more durable than conventional engines because the CMC’s material temperature capability is hundreds of degrees higher than legacy nickel-based alloys currently in service in both commercial and military engines. Since it began developing the technology in the early 1990s, GE Aviation has invested more than $1 billion in CMCs, which are made of silicon carbide ceramic fibers and ceramic resin, manufactured by GE facilities in Delaware and North Carolina through a highly sophisticated process and further enhanced with proprietary coatings. GE’s small-scale CMC production facility in Newark, Delaware, built the turbine components for the F414 test. GE’s mass production facility in Asheville, North Carolina, will produce static parts for the LEAP engine.

News

Cubic Recognized as a Superior Supplier to the U.S. Army by the U.S. Department of Defense

February 11, 2015 SAN DIEGO, CA -- Cubic Corporation announced today it has been recognized as one of the top performing defense contractors under the U.S. Department of Defense’s Superior Supplier Incentive Program (SSIP). The ranking of the top 25 supplier units within the contracting industry is part of a continuing effort to improve the government’s largest procurement operations by curbing costs and professionalizing the workforce. Cubic ranked as a tier 2 supplier for the U.S. Army. The ratings are based on an internal data system known as the Contractor Performance Assessment Reporting System (CPARS). The SSIP uses performance data to rate the largest companies doing business with each of the three services, based on contract obligations, and categorizes by company business segment into one of three performance tiers. “Cubic is honored to be recognized as a superior supplier by the U.S. Department of Defense. It’s our mission to remain focused on meeting the needs of the defense industry and this ranking validates our hard work and efforts on behalf of our most important customers,” said Bradley H. Feldmann, president and chief executive officer of Cubic. “We believe it’s our company culture to win the customer by delivering superior value through early delivery, providing the best people, being absolutely responsive and innovating what’s next with our customers.” Cubic Defense Systems and its affiliates are leading providers of realistic combat training systems and secure communications for national military and security forces. Its primary focus is to design, develop, manufacture, integrate, innovate and sustain advanced technologies responsive to mission requirements of U.S. and allied forces. Infantry troops, aircrews, and security forces all draw upon the realism gained from using Cubic’s training systems to help them effectively perform their mission.

TÜV SÜD America 1475 East Sam Houston Parkway South, Suite 100, Pasadena, Texas 77503 United States(800) 747-4099 [email protected] www.tuv-sud-america.com/c.o.g

To learn more, visit www.tuv-sud-america.com/COG-Training

TÜV SÜD America

Chemical, Oil and GasTÜV SÜD America, Chemical, Oil and Gas helps people

and organizations drive business performance to levels of

excellence. We provide effective training paths to support the

growth of individuals and organizations, whether in one of our

public training programs or in customized in-house solutions.

FederalBuyersGuide.indd 1 1/30/2015 10:06:33 AM

Struers is the world leader in materials testing. Since 1875 we’ve provided our customers with the absolute finest equipment, consumables, and application knowledge for quality control, research, and failure analysis. Contact us today, and experience:

• Industry-leading, high quality products

• Best-in-class customer service

• Unparalleled application and technical support

• Streamlined purchasing

USA & CANADAStruers Inc. Tel: [email protected]

Your one stop shop for Materials Testing

High Temperature Products Since 1971

TECH SUPPORT I CUSTOM FORMULATIONS I QUANTITY PRICING

131 47th Street, Brooklyn, New York 11232-4225Call: 718.788.5533 Fax: 718.788.5538 Email: [email protected] Web: www.cotronics.com

HIGH TEMPERATURE MATERIALS FOR

Flexible Conductive Silver Based EpoxyDuralco™ 125 thermally conductive electrical epoxy bonds to most metals, ceramicsand plastics to form a stress-free adhesive bond. Continuous service up to 450ºF.

High Expansion AdhesiveThermeez™ 7030 bonds and protects to 1800ºF. Apply toceramics, ceramic cloths, door and tadpole gaskets andmetals. Excellent adhesion to steel, stainless, aluminum,lead and ceramics.

High Purity, Alumina Adhesive Protects Critical Electronic Components Resbond™ 989 offers continuous protection to 3000ºF. Apply directly to metals, glass,ceramics, graphite and silicon carbide. Provides high bond strength and excellentelectrical, moisture, chemical and solvent resistance for bonding and sealing.

You have challenging applications… we have solutions!

Thermally Conductive AdhesivesDuralco™ 132 thermally conductive adhesives combineCotronics’ unique, high temperature resins with highlyconductive fillers to form thermally conductive, adhesivebonds with continuous service up to 500ºF.

High Temperature Low Expansion AdhesiveResbond™ 905 Quartz is formulated for bondng low expansion and thermal shock resistant ceramics. Ideal forelectronic and metallurgical applications to 2500ºF.

ELECTRICAL l STRUCTURAL l INDUSTRIAL l MEDICALAPPLICATIONS TO 4000ºF

Cotronics_FederalBG_2015_Federal BG PG 1/15/15 9:38 AM Page 1

News

Northrop Grumman Wins Contract to Support Critical IRS Infrastructure

February 11, 2015 MCLEAN, VA -- Northrop Grumman Corporation has been awarded a $62.2 million dollar contract by the Internal Revenue Service (IRS) to support the IRS in building and delivering an integrated and shared IRS infrastructure.

Under the five-year contract, Northrop Grumman will provide information technology professional services and subject matter expertise in the areas of architecture, engineering and development services. A task order under the TIPPS-4 indefinite delivery/indefinite quantity contract, the IRS Infrastructure Shared Services (ISS) program has Northrop Grumman leading a team consisting of Strategic Technology Partners, JayTech Corporation, APEX Systems Inc., TEKsystems Inc., and ManpowerGroup Public Sector Inc. “We welcome the opportunity to build on the trusted partnership we have developed with the IRS,” said Ed Sturms, vice president and general manager, civil division, Northrop Grumman Information Systems. With a heritage of supporting mission critical systems across civil financial agencies, Northrop Grumman provides integrated and scalable solutions through the collaboration of experienced people, consistent solution delivery and tested technologies. The company provides solutions that can automate the entire submission processing lifecycle to rapidly ingest, validate and disseminate very large and complex data sets in high volumes to ensure operational efficiency. Northrop Grumman securely collects, analyzes, and disseminates financial information concerning national security in an effort to ensure regulatory compliance and safeguard its financial systems.

F I L AM E N T W I N D I N G M A C H I N E S ~ M A C H I N E C O N T R O L SA U X I L I A R Y E Q U I P M E N T ~ PAT T E R N S O F TWA R E

F I B E R D E L I V E R Y S Y S T EM S ~ T E N S I O N E R SR E T R O F I T T I N G A N D M O R E

A D VA N C E D F I L A M E N T W I N D I N G S Y S T E M S

Our line of filament winders begins with a “use it right out of the box” 2 axes

model, to a workhorse production unit that can be configured with 3-6 axes of

computer controlled motion. All winders can be customized. We also offer precision

tensioning creel systems, fiber delivery systems, extraction systems and mandrels.

Q U A L I T Y I N N O V AT I O N LO N G E V I T Y

K e e p i n g p a c e w i t h t h e n e e d so f t h e c o m p o s i t e s i n d u s t r y .

News

U.S. Army Space & Missile Defense Command Selects BAE Systems to Provide Critical

Readiness Support

February 11, 2015 MCLEAN, VA -- The U.S. Army Space and Missile Defense Command has awarded BAE Systems a two-year contract to provide hardware, software, and systems integration support for the Battlespace Command and Control Center. The initial award is valued at $11.8 million with the total value of the two-year contract estimated at $23 million. Under the contract, BAE Systems will perform upgrades to mobile training suites and provide systems and network administration support to the Non-Organic Radar Access program. The work will minimize downtime for critical systems and enhance the ability of warfighters to analyze and manage the increasing amounts of data, while shortening the processing time for critical decision making. “Our experts are helping U.S. forces quickly identify ground, air, space, and undersea threats to national security,” said Mark Keeler, vice president and general manager of Integrated Electronics and Warfare Systems at BAE Systems. “We’re enhancing system readiness and increasing the warfighter’s ability to process information that’s critical to protecting our men and women in uniform.” The award was received under the Concepts and Operations for Space and Missile Defense Integration Capabilities indefinite delivery/indefinite quantity contract. BAE Systems has held the contract since its inception in 2006.

News

Boeing System Could Bring Precision to Laser Weapons on U.S. Navy Ships

February 17, 2015 ALBUQUERQUE, NM -- Boeing has been awarded a $29.5 million contract to design and develop a beam control system that could provide exceptional accuracy for laser weapons on U.S. Navy warships. Boeing will begin to design a prototype High Power Beam Control Subsystem (HP BCSS) that’s compatible with High Energy Lasers (HEL) based on solid-state laser (SSL)

technology. Boeing’s solution will be compatible with systems other companies are designing for the Office of Naval Research’s (ONR) Solid State Laser Technology Maturation (SSL-TM) program. The resulting beam control system will focus and hold a laser on a moving aimpoint long enough to disable the target. Doing that with a ship-based laser is particularly challenging, given the maritime environment and constant movement of an at-sea vessel. “Boeing innovations in beam control and directed energy technologies are keys to understanding laser weapon system configurations that could yield a capability for the Navy in their maritime environment,” said Peggy Morse, vice president, Boeing Directed Energy & Strategic Systems (DESS). The Boeing beam control system capitalizes on the company’s work with the U.S. Army’s High Energy Laser Mobile Demonstrator (HEL MD). In demonstrations at Eglin Air Force Base in Florida in 2014, in which Navy program team members participated, HEL MD acquired, tracked and destroyed targets in windy and foggy conditions. Important technical data was collected on energy systems within a maritime environment, which ONR shared with the Army and Boeing. HEL MD has disabled mortars and Unmanned Aerial Vehicles (UAVs) during recent testing.

Ken Forging Crosswise Turnbuckle Ad_Layout 1 1/5/15 2:01 PM Page 1

News

General Dynamics Awarded $50 Million for Abrams Tank Production

February 17, 2015 STERLING HEIGHTS, MI -- The U.S. Army TACOM Lifecycle Management Command has awarded General Dynamics Land Systems $49.7 million under an existing contract to upgrade M1A1 Abrams tanks to the M1A2 Systems Enhancement Package (SEP) V2 configuration. General Dynamics Land Systems is a business unit of General Dynamics. The most technologically advanced digital tank, the M1A2 SEP V2 includes improved color displays, day and night thermal sights, commander remote operated weapon station (CROWS II), a Thermal Management System (TMS) and a tank-infantry phone. The M1A2 SEP V2 maximizes the fighting ability of the tank on today's battlefield while preparing the platform for tomorrow's challenges. The original multi-year contract was awarded in February 2008, which authorized the upgrade of 435 M1A1 tanks that have been in the Army's inventory for more than 20 years. General Dynamics is continuing the conversion of the tanks in the Army's active component to the M1A2 SEP V2 configuration. Production will be performed by existing employees in Anniston, Ala.; Tallahassee, Fla.; Sterling Heights, Mich.; Lima, Ohio; and Scranton, Pa., and is expected to be completed by January 2017.

News

Exelis Receives $7.6 Million Contract to Provide U.S. Army On-the-Move Connectivity with Low

Profile Satellite Antennas

February 23, 2015 FORT WAYNE, IN -- Raytheon Company and its partner team along with the U.S. Army are testing a new training instrumentation system that helps enable and improve home station training by blending live, virtual and constructive training domains across widely dispersed geographic locations. This new capability, called the Joint Pacific Multinational Readiness Capability Instrumentation System (JPMRC – IS), consists of an integrated system of deployable shelters, communications hardware and software that is used to train Army units based on a high fidelity exercise against a thinking opponent. “This new system gives us opportunities to maintain readiness in ways that provide great flexibility while maximizing scarce training resources,” said Bob Williams, Raytheon Global Training Solutions vice president. “We recently completed a rehearsal with the JPMRC-IS involving more than 400 Soldiers across several Hawaiian islands, and it felt and worked exactly like a full rotation at one of our Combat Training Centers.” The JPMRC – IS can be easily transported, is capable of continuous, 24-hour a day operation for weeks at a time, and can extend the training battlespace across physical boundaries by linking units, sites and trainers in real time. The instrumentation system collects and stores specific, scenario-focused information on performance, then aids the exercise controllers in monitoring the exercise, analyzing the performance data, and preparing and presenting detailed performance feedback to the exercise units. The exercise participants obtain direct feedback on how they executed their missions, and lessons learned on how to improve performance. Raytheon will test the JPMRC – IS this month during a multi-unit exercise in Hawaii called Lightning Forge. This Initial Operating Capability event will demonstrate the ability to perform distributed operations as part of a two-battalion exercise on Oahu and the island of Hawaii. Raytheon leads the Warrior Training Alliance (WTA), a team of more than 150 partner companies that provides training support to the U.S. Army around the world on the Warfighter Field Operations Customer Support (FOCUS) contract.

3203 Peppers Ferry RoadWytheville, VA Ph: (276) 228-3167

[email protected]

News

Raytheon Team Tests New Global Capability to Help Improve U.S. Army Readiness

February 23, 2015 DULLES, VA -- Raytheon Company and its partner team along with the U.S. Army are testing a new training instrumentation system that helps enable and improve home station training by blending live, virtual and constructive training domains across widely dispersed geographic locations.

This new capability, called the Joint Pacific Multinational Readiness Capability Instrumentation System (JPMRC – IS), consists of an integrated system of deployable shelters, communications hardware and software that is used to train Army units based on a high fidelity exercise against a thinking opponent. “This new system gives us opportunities to maintain readiness in ways that provide great flexibility while maximizing scarce training resources,” said Bob Williams, Raytheon Global Training Solutions vice president. “We recently completed a rehearsal with the JPMRC-IS involving more than 400 Soldiers across several Hawaiian islands, and it felt and worked exactly like a full rotation at one of our Combat Training Centers.” The JPMRC – IS can be easily transported, is capable of continuous, 24-hour a day operation for weeks at a time, and can extend the training battlespace across physical boundaries by linking units, sites and trainers in real time. The instrumentation system collects and stores specific, scenario-focused information on performance, then aids the exercise controllers in monitoring the exercise, analyzing the performance data, and preparing and presenting detailed performance feedback to the exercise units. The exercise participants obtain direct feedback on how they executed their missions, and lessons learned on how to improve performance. Raytheon will test the JPMRC – IS this month during a multi-unit exercise in Hawaii called Lightning Forge. This Initial Operating Capability event will demonstrate the ability to perform distributed operations as part of a two-battalion exercise on Oahu and the island of Hawaii. Raytheon leads the Warrior Training Alliance (WTA), a team of more than 150 partner companies that provides training support to the U.S. Army around the world on the Warfighter Field Operations Customer Support (FOCUS) contract.

TRANSPORTATION MANAGEMENT SERVICESEMERGENCY TRANSPORTATION SIMPLIFIED

Transportation Management Services Past Contracts:

17810 Meeting House Road, Suite 200

Sandy Spring, Maryland 20860

800-437-7629 | [email protected]

www.tms.com

Planning and operational support for motor coach evacuation operations during declared federal disaster scenarios.

News

Lockheed Martin Awarded Contracts to Support U.S. Navy Cross Domain Intelligence Sharing

Solution

February 25, 2015 DENVER -- Lockheed Martin will continue to support the Navy system that allows secure sharing of sensitive data between unclassified and classified security domains. The U.S. Navy recently awarded Lockheed Martin two contracts with a total ceiling value of $90 million to support the Radiant Mercury cross domain solution for five years. “Since developing Radiant Mercury in 1992, we’ve ensured it has met the operational needs of customers throughout the world,” said Dr. Rob Smith, vice president of C4ISR for Lockheed Martin’s Information Systems & Global Solutions business. “As we deploy the fourth generation of the system, we’ll continue to advance it with the most robust capabilities available.” Today’s military and intelligence operations depend on the timely sharing of critical information. Radiant Mercury helps this by ensuring that data transferring from one network domain to another undergo extremely high levels of scrutiny, protecting against compromises in the integrity of the information. While guarding classified data from unauthorized access, the system simultaneously allows those with the appropriate security classification to retrieve sensitive and critical information. Radiant Mercury supports simultaneous data flows to hundreds of channels, interfaces with most major C4ISR systems, and supports most transport, network and data link protocols. Used by both U.S. and allied partners at more than 400 sites worldwide, Radiant Mercury has streamlined the process of sharing critical operational and intelligence information with coalition forces. Accredited at the highest levels of protection in the United States for secure information sharing, Radiant Mercury is compliant with the Intelligence Community Directive 503 policy, which protects sensitive compartmented information within information systems. It is also approved for both top secret and secret interoperability by the Unified Cross Domain Services Management Office, which lists systems verified to transfer DoD and intelligence community information between multiple security domains with limited risk. Radiant Mercury is available on the U.S. General Services Administration schedule of products and services.

For further information on the product, service or sales, please access smithsdetection.com or contact [email protected]

GUARDION is a trademark of Smiths Detection Group Ltd.

Product capabilities include:

• Identify gases and vapors at the parts per million to parts per billion levels• Innovative library searching software that provides answers instantly while in the field• Ruggedized for use in the hot zone and extreme environments• Superior performance enables the detection of emerging threats

EVERY SECOND COUNTS

GUARDION™

Smallest, Lightest, and Fastest Portable GC/MS Chemical Identifier

REACHING OUT | G10-55A Telehandler

THE PERFORMANCE YOU NEED TO WORK AT YOUR PEAK. The JLG® G10-55A telehandler provides outstanding reach, control and maneuverability to keep your team members safe and hard at work. We bring this approach to safety and efficiency to all of our military and government equipment to keep missions moving and productivity booming.

Visit www.jlg.com/en/government1 to learn more.

MORE CONTROL HERE.

HERE.

AND HERE.

JLG offers GSA and DLA programs to assist in the purchase of equipment.

JLG_BuyGuideMat_2014.indd 1 7/15/14 8:45 AM

Event

Government Procurement Conference

April 15, 2015: Washington, D.C. The Government Procurement Conference is a national conference fostering business partnerships between the Federal Government, its prime contractors, and small, minority, service-disabled veteran-owned, veteran-owned, HUBZone, and women-owned businesses. Now in its 25th year, the Government Procurement Conference has become the premier event for small businesses throughout the United States. Participating firms will have the benefit of marketing their products/services to procurement representatives and small business specialists from government agencies. Companies may choose to set up an exhibit table to showcase their capabilities or simply come as an attendee. The conference also includes educational conference sessions, procurement matchmaking, and a dynamic exhibitor showcase. Walter E. Washington Convention Center 801 Mt. Vernon Place Northwest Washington, DC 20001 For more information, visit: http://www.fbcinc.com/

© Copyright 2013 Atlas Copco Compressors LLC. All rights reserved.

Can you find the right balance?

Take that first step towardsustainable productivity.Using less energy and boosting productivity may seem like opposing goals, but AtlasCopco can show you how to make them work together. And it won’t require you towalk a tightrope. With 14 production facilities in the United States and dozens moreglobally, we never stop looking for ways to help our manufacturing teams – and moreimportantly yours – innovate for sustainable productivity.

In 2013, Atlas Copco celebrates our 140th anniversary. To celebrate we are giving ourcustomers game-changing energy-saving solutions, including a remote monitoringsystem that has simplified and changed compressor maintenance forever, andarguably the most revolutionary new air compressor to ever hit the market.

Let Atlas Copco demonstrate to you just why, year after year, we have been listed asone of the top 20 most sustainable companies in the world. Call 866-688-9611.

Event

AeroDef Manufacturing 2015

April 20-23, 2015: Dallas, TX Join leaders in commercial aerospace manufacturing and defense aerospace manufacturing at the industry’s most acclaimed manufacturing event – AeroDef Manufacturing, with Composites Manufacturing. The leading aerospace manufacturing OEMs will convene their suppliers and potential partners to find integrated solutions to meet the surging demand for aircraft. This year’s exhibition and manufacturing conference will be held in Dallas, the hub of Texas aerospace manufacturing.

This is your opportunity to experience the aerospace manufacturing extended enterprise at one venue and see the technologies and meet the people who are defining the future of the industry. AeroDef Manufacturing Technology Zones

Composites, metals & advanced materials Contract manufacturing services Precision machining & tooling Finishing & coatings Quality, measurement & inspection Integrated assembly & robotics Digital & additive manufacturing/3D printing

AeroDef attracts high-level attendees with exclusive content developed, and presented, by the leading aerospace and defense OEMs. Speakers, panel discussions and the technical conference are carefully selected to address issues and technologies of strategic importance to the industry. Networking events are held on the floor to encourage meaningful collaboration among presenters, attendees and exhibitors. Building meaningful business partnerships - it’s part of the AeroDef promise. Hotel Anatole 2201 North Stemmons Freeway Dallas, TX 75207 For more information, visit: http://www.aerodefevent.com/

Vacuum Shock and Vacuum Clean

Palmero’s 2-step Vacuum Shock and Vacuum Cleansystem can keep vacuum lines functioning at

peak efficiency.

Vacuum Line Cleaning System

Ease of Use:Manufacturer Description: Vacuum Shock, the �rst stage in the Palmero 2-step system, keeps vacuum lines clean with a single time-released tablet every 3 months. Maintenance with Vacuum Clean, the second stage in the system, requires only one self-activating tablet per week, each of which releases powerful cleaning chemicals throughout the week.

E�ectiveness:Manufacturer Description: Vacuum Shock and Vacuum Clean provide consistent suction and asepsis while extending pump life. Vacuum Shock keeps vacuum lines clean while Vacuum Clean restores pressure and maintains cleanliness.

Odor Elimination:Manufacturer Description: Vacuum Shock keeps vacuum lines free of odor causing bacteria. The neutral pH of the Vacuum Clean tablets helps to reduce dispersal of amalgam into sewer systems.


800-344-6424

Available in Kits:

E-Vac System Kit: Jar of shock, Jar of Clean

Shock, Clean Kit:Jar of shock, Jar of Clean and 1 Pour & Clean bottle

Operatory Kit:16 Clean Tablets

and 1 Shock Tablet

Shock & Clean Trial Kit:16 Clean & 1 Shock

(6 Tablets) (45 Tablets)

For more information contact us

PROMO CODE: _______________(EPA #) hint �nd on EPA website


Get your free sample DisCide Ultra

Fax request to 203-377-8988, email request to [email protected] orMail to PHC 120 Goodwin Pl Stfd. CT. 06615Name:__________________________________________________Street:__________________________________________________City:______________________State:______Zip Code:___________

As shown on the EPA’s list, Palmero Health Care’sDisCide Ultra Disinfecting Towelettes and DisCide Ultra Disinfecting Spray ACHIEVED the Agency’sstringent e�cacy performance standards againstStaphylococcus aureus, Pseudomonas aeruginosa,and Mycobacterium BCG (tuberculosis bacteria)and are con�rmed as an e�cacious hospital disinfectants.

HOW DID YOUR DISINFECTANT RATE?Visit EPA website for more infohttp;//www.epa.gov/oppad001/atp-product-list.pdf

Gallon re�llQuart with sprayer

160 count, 6" x 6¾" towelettes

60 count 10.5 X 10.5

The Disinfectant you can trust!

GSA #V797P-2262DUSAUSA

MADE IN TH

E

NAICS 339110 GSA #V797P-2262D

NAICS 339110

Registered

Event

SPIE Defense + Security 2015

April 20-24, 2015: Baltimore, MD The SPIE Defense + Security is the leading meeting for scientists, researchers, and engineers from industry, military, government agencies, and academia throughout the world. For more than 20 years, Defense + Security has been one of the largest defense technology meetings worldwide, and it is the key event featuring optics, imaging, and sensing. One of the strengths of Defense + Security is its central location in the Baltimore Inner Harbor, close to the center of many U.S. Federal Government offices/agencies and many of the largest defense/security contractors and aerospace companies in America. Defense + Security is a prime event for government acquisition, policy, and program executive representatives. This year Defense + Security has 32 separate conferences spanning all 5 days of the symposium, with over 1,200 presentations. Why Attend? With its two technical symposia and corresponding exhibition, Defense + Security offers the best opportunity for efficient information exchange, business development, vendor and project networking, and professional development, keeping you at the forefront of technologies necessary for successful completion of your mission. Why Exhibit? SPIE Defense + Security Expo 2015 is the best opportunity to meet and discuss your situation with suppliers, discover new possibilities, and increase capabilities at a lower budget. You can:

Meet 6,000 researchers and engineers interested in the latest optics, lasers, sensors, image processing, spectroscopy, infrared systems, and optoelectronics

Connect to technical leaders from the U.S. Army, Navy, and Air Force, NASA, FLIR, Lockheed Martin, L-3, and many more.

Baltimore Convention Center One West Pratt Street Baltimore, MD 21201 For more information, visit: http://spie.org/

Event

Unmanned Systems 2015

May 4-7, 2015: Atlanta, GA AUVSI’s Unmanned Systems 2015 convenes the largest global community of commercial and defense leaders in intelligent robotics, drones and unmanned systems. On May 4, 2015, every domain—air, ground and maritime—and industry, from agriculture and construction to energy and academia, will converge under one roof to shape the future through shared thought leadership and technology innovations. Last year was a record breaking year, featuring more than 350,000 sq. ft. of exhibit space, 600+ exhibitors and more than 8,000 attendees from over 55 countries, plus 400 members of the press and media.

Learn about the hottest industry issues, advancements, and opportunities in the industry through over 100 technical sessions, panels, and workshops featuring the industry's top speakers and leading experts.

Interact with cutting-edge technological advancements from more than 600 innovators to enhance your business and industry knowledge. If you are looking for a solution, a business partner, or a new product, you will find it at Unmanned Systems 2015.

Connect with more than 8,000 industry leaders and professionals from over 55 countries. Unmanned Systems 2015 is the ultimate industry networking event, facilitating unparalleled connection and business opportunities.

In addition to meeting face-to-face with the industry's top decision makers, you will also find demonstrations; international, technology-specific and start-up pavilions; Beyond the Booth Showcase and poster sessions; and our exclusive VIP club on the show floor. Georgia World Congress Center 285 Andrew Young International Boulevard Northwest Atlanta, GA 30303 For more information, visit: http://www.auvsishow.org/auvsi2015

TAKE TRAINING OUTSIDEThe SYNRGY BlueSky™ Training System takes group training into the invigorating great outdoors. Choose from 5 workout stations and 6 connectors to create a customized system and expand your training area.

© 2014 Life Fitness, a division of Brunswick Corporation. All rights reserved. Life Fitness is a registered trademark of Brunswick Corporation. SYNRGY BlueSky is a trademark of Brunswick Corporation. USC-024-14 (05.14)

Go outside: LifeFitness.com/outsideor call the Military 800.494.6344 and reference the LF GSA# GS07F9380G

Event

Space Tech Expo

May 19-21, 2015: Long Beach, CA Space Tech Expo is the West Coast's premier B2B space event for spacecraft, satellite, launch vehicle, and space-related technologies. Leading the West Coast space and satellite industry, the conference brings together industry leaders, decision makers, specifiers, and buyers to meet manufacturers and the supply chain for civil and commercial space. Why Attend?

New Business Opportunities: Industry interest in emerging spacecraft technologies is at an all-time high. The time is now to capitalize on the new market era of expanded private-sector applications and opportunities.

Fully Integrated Exhibition Hall: Covering satellite systems, launch vehicle and spacecraft design, engineering, testing, and all facets of the manufacturing supply chain, the exhibition will help your company to effectively reach a highly targeted audience with a pre-established and growing need for your company’s technology and service offerings.

Marketing and Sponsorship Opportunities: Through utilization of the right mix of print, electronic, and new media channels, a dedicated team is responsible for the development and implementation of a comprehensive marketing campaign to ensure that your company and brand presence are effectively promoted from the time of engagement through post-show follow-ups.

Networking: Structured networking and organized social activities are built directly into the event to ensure maximum interaction between technical conference delegates, invited guests, exhibitors, and attendees.

Why Exhibit? With its multi-faceted technical conference programming, comprehensive hall offerings and attendee networking opportunities, Space Tech Expo is set to present exhibitors with a one-of-a-kind marketplace of ideas via one of the most highly targeted ROI channels from any exhibition of its type. Long Beach Convention & Entertainment Center 300 East Ocean Boulevard Long Beach, California 90802 For more information, visit: http://www.spacetechexpo.com/

Southern Police Equipment is a 100% Woman Owned Small Business located in Richmond, V irginia. We are celebrating our 43nd year of business in 2014. Specializing in products for Law Enforcement, Military/F ederal and E MS Agencies with over 11,000 items on GSA . L isted below are the Manufacturers currently on our GSA Contract # GS-07F-0273T

Anchor Uniform - Raincoats Alta Industries - Elbow/Knee Pads Armor Express Body Armor ArmorShield Body Armor, Shields, Plates Bates- Uniform Shoes Blackinton -Badges/Insignia Bosik Technologies Bullet Trap Boston Leather - Duty Gear Boyt Tactical Gun Cases Brite-Strike - Flashlights /APALS Bushnell Binoculars Carolina Safety Sport Safety Vests Code 3 Light Bars Combined Tactical Systems - Munitions Converse Military Boots D&K Manufacturing Badge Cases EcoPure Mini Emergency Respirator EMA Tactical- RONI/Grips Edge Tactical Eyewear EOTech - Weapon Sights Florsheim Uniform Shoes Fusion Climbing Carabiners Highcom Security Ballistic Plates, Helmets, Vests Humane Restraint- Leather/Poly Restraints HWI Gear Tactical Gloves Information Display Company- Speed Check System L&R Ultrasonics- Weapons Cleaning Tanks Liberty Uniform- Class A Uniforms Leatherhead Tools-Entry Tools

Mace Security International- Pepper Spray Max Pro Police & Armor- Patrol Helmets Milspec Plastics Disposable Restraints Mocean- Bike Patrol Uniforms Otis Technology- Weapons Cleaning Kits Paulson Manufacturing Corp- Riot Shields Peerless Handcuffs- Handcuffs Penn Arms- Grenade Launchers R&B Fabrications, Inc Incident Vests Revision Military Ballistic Eyewear, BATLSKIN Helmets Rings Manufacturing Blue Guns Rockport Uniform Shoes Safety Innovations Walkie Clips Samuel Broome Uniform Accessories Neckties Smith and Warren Badges/Insignia Southwest Synergistic Solutions Triage Lights SPE- Survival Armor Streamlight Flashlights Tac5 Handheld Thermal Imaging System Tactical Solutions Conversion Kits

Leather Jackets Thorogood Boots/Shoes Triple K Manufacturing Duty Gear Tru Spec/Atlanco Tactical Uniforms TurboflareUSA Electronic Flares

Duty Gear United Shield International Shields/ Helmets Wigwam Mills, Inc Tactical Socks Z-Bolt Tactical Lasers/Illuminators

Please contact Walter Clarke for additional information 800-542-5243 or email [email protected]

7609 Midlothian Turnpike, Richmond, VA 23235

Toll Free: 800-542-5243 Local: 804-323-1855 Fax: 804-323-5067 www.southernpoliceequipment.com

Southern Police Equipment Co.

PRESS RELEASE

Richmond, Virginia, October 05, 2015 – Southern Police Equipment is pleased to

announce the addition of FLIR’s Thermal Imaging, Night Vision, and Infrared Camera

systems to their portfolio top quality products, and to Southern Police Equipment’s GSA

Schedule 84 contract (GS-07F-0273T).

FLIR is the world leader in the design, manufacture, and marketing of advanced imaging

systems for situational awareness and security applications.

Southern Police Equipment is a 100% Woman Owned Small Business based in Richmond, VA.,

founded in 1971 serving Law Enforcement, Military, and First Responder markets.

Karen Allan Ballengee

President

Southern Police Equipment

7609 Midlothian Turnpike

Richmond, VA 23235

Phone: 800-542-5243

Local: 804-323-1855

Fax: 804-323-5067

Email: [email protected]

7609 Midlothian Turnpike, Richmond, VA 23235

Toll Free: 800-542-5243 Local: 804-323-1855 Fax: 804-323-5067

mailto:[email protected]

Atlanta, Georgia

Event Visitor

Getting to Atlanta: Hartsfield Jackson International Airport (ATL) is one of the busiest airports in the country, making it easy to find a flight that meets your needs. However, make sure you plan accordingly, allowing yourself enough wiggle room when you fly in and fly out of Hartsfield in case of airport- or weather-related delays. The airport is a mere 10 miles from downtown Atlanta, so you should be able to get to your final destination quickly. Ground Transportation: Taxi cabs charge a standard flat rate of approximately $30 to take passengers from the airport to downtown Atlanta. Standard taxi rates are around $2.50 for the first 1/8 mile and 25 cents for each 1/8-mile thereafter, so your fare can add up fast. Also bear in mind that Atlanta is a large city, so travel and traffic times need to be factored into the final cost.

Getting Around the City: Although the freeways get congested occasionally, driving is the best way to get around Atlanta. The first thing to learn is OTP or ITP. These Atlanta-related slang terms translate to “outside the Perimeter” and “inside the Perimeter.” The Perimeter, also known as Interstate 285, circles the city of Atlanta. Some newcomers have a hard time realizing that if they travel on I-285 they will eventually wind up where they started, and no one wants that to happen. It also helps to

know the phrase “top end,” meaning the section of the Perimeter above I-20, and the phrase “bottom end,” referring to anything below I-20. If you don’t want to drive, Atlanta’s public transportation system is quite easy and is a great alternative. MARTA (Metropolitan Atlanta Rapid Transit Authority) is the most popular choice for both bus and train riders. Look for the striped signs in blue, orange, and gold, which are identified as MARTA stations, stops, and vehicles. For those who ride the MARTA bus, the names and route numbers are displayed above the vehicle’s windshield. For train riders, there are signs that direct passengers to the trains and give directions to platforms for boarding. There are also courtesy telephones, MARTA police, and customer service staff that can help you if you need require assistance. You will need to purchase the “Breeze” card for $1 and then load money to the card depending on your final destination.

Atlanta, Georgia

Event Visitor

Weather: Spring in Atlanta is mild, with temperatures ranging from the

mid-70s to the low 80s as it nears summer. Just keep in mind that March is the wettest month, so make sure you pack an umbrella if you’re traveling during that time. While summer temperatures fluctuate

between the low 80s and high 90s, it’s the infamous humidity that really takes some getting used to!

In the fall, the leaves begin to change, making it a picturesque time of year.

Temperatures tend to stay in the 60s and it doesn’t rain very often, so it is very possible to still enjoy outdoor activities. However, winter in Atlanta usually means snow and very cool temperatures. Daytime highs range from the mid-

to upper-50s and nighttime temperatures can drop into the low 30s.

Off the Clock: The Sanctuary: Located in trendy Buckhead, this is the place to go if you love dancing, especially salsa dancing. Fridays are salsa nights, with lessons starting at 9 p.m., so whether you’re a beginner, intermediate, or advanced dancer, you’re guaranteed to have a fun time. Drinks aren’t allowed on the dance floor, but there are many lounges where you can take a break and enjoy a cocktail. 3209 Paces Ferry Pl NW, (404) 262-1377.

World of Coca-Cola: Since Atlanta is considered the birthplace of Coke, the World of Coca-Cola is a must-see attraction. During the guided tour, you can enjoy an 8 oz. glass bottle of Coke as you learn about the history of the world's most famous soft drink. You will see more than 1,200 never-before-displayed artifacts ranging from vintage bottles to a 1939 delivery truck from Argentina. There is even a 4-D movie experience, “In Search of the Secret Formula.” In Taste It!, you can sample over 60 different flavors of the classic beverage from around the world and then try to match the original by mixing your own concoction in the Vault of the Secret Formula. At the end, you can have your photo taken with the iconic Coke polar bear just to prove you were here! 121 Baker St NW, (404) 676-5151.

Martin Luther King, Jr. Historic Site: Encompassing 35 acres, the Martin Luther King, Jr. Historic Site consists of landmarks as well as modern-day monuments and facilities. This site takes visitors on a journey through the historical struggles of the South, memorializing the life and legacy of Dr. Martin Luther King, Jr. You can visit Dr. King’s original gravesite and current tomb, tour his boyhood home, and see Ebenezer Baptist Church and the historic Fire Station No. 6—one of the South’s first desegregated fire houses. 450 Auburn Ave NE, (404) 331-5190.

Atlanta, Georgia

Event Visitor

Dining in Atlanta: Recommendations for Business Meetings

Glenn’s Kitchen: For American comfort food with a Southern flair, head to Glenn’s Kitchen in downtown Atlanta. The eatery serves up breakfast, lunch, and dinner in a casual yet sophisticated environment that is perfect for a business meeting. Favorite dishes include the short rib ravioli, shrimp and grits, North Georgia trout, fish tacos, and classic pan-seared Angus burger. Make sure you pair your meal with a glass of wine from the extensive wine list or a signature handcrafted cocktail. 110 Marietta St NW, (404) 469-0700

SkyLounge: It goes without saying that rooftop bars offer terrific scenery, and SkyLounge is no exception, boasting picture-perfect vistas of Atlanta. In fact, SkyLounge is so famous for its expansive views that it was voted one of the top rooftop bars in the world by ABC.com. But beautiful scenery isn’t all this lounge offers. With its elegant furnishings and glamorous bar providing delicious, handcrafted cocktails made by an award-winning mixologist, the SkyLounge is a great place to start or end your evening. 110 Marietta St NW, (404) 521-2250

Fox Bros. Bar-B-Q: Once you dine at Fox Bros., it’s easy to see why the eatery has been voted the best BBQ in Atlanta by the Atlanta Journal Constitution. All the meats are cooked low and slow over hickory, resulting in tender and savory baby back ribs, pork, chicken, and brisket. Though this BBQ joint is nothing fancy, it certainly offers mouth-watering grub, making it an ideal spot for a casual meal with other business professionals. 1238 DeKalb Ave NE, (404) 577-4030

Your work can’t wait. With Pro-Line’s

“In Stock” Program, you can get the

exact modular workbench your

application demands in 5 days or less -

with your choice of work surface, color,

and many accessories and options.

have been synonymous with quality, functionality and unmatched

ergonomic design.

exact accessories you need.

27 5066

Get the bench you need and get it fast.

Ergo-Line

Dimension Next ModularWorkstations

Pro-Line is a division of the R.W. Hatfield Co., Inc.

www.industrialworkbenches.com

1proline.com(800) 739-9067

Atlanta, Georgia

Event Visitor

Quick Eats on a Budget

Just Around the Corner: This spot is, well, just around the corner from the World Congress Center, making a great spot to grab a quick bit to eat. For less than $10, you can get a delicious burger, seasoned fries, and a drink with free refills—a great deal. On a nice day, grab a table or chair under the red awning and enjoy your meal. If you’re there on a weekday, take a second to step inside the State Bar Building across the street and see a recreation of President Woodrow Wilson's law office in the lobby. 76 Spring St NW, (404) 522-5632

Per Diem Rates as of March 2015:

The following rates apply for Atlanta, Georgia

Primary Destination*

County

Max Lodging by Month

(Excludes Taxes)

Meals & Inc. Exp. **

Atlanta

Fulton / Dekalb / Cobb

Mar Apr May Jun

56 135 135 135 135

* NOTE: Traveler reimbursement is based on the location of the work activities and not the accommodations, unless lodging is not available at the work activity, then the agency may authorize the rate where lodging is obtained. ** Meals and Incidental Expenses, see Breakdown of M&IE Expenses for important information on first and last days of travel.

KaddiesHI_Layout 1 2/7/14 12:31 PM Page 1

Federal Buyers Guide 2014-2015 • Trim: 8.5" x 11" • KM 4840 RSNA Full Ad

The healthcare industry is changing

rapidly. At Konica Minolta we understand

your needs and focus on helping you

achieve improved economic value and

added clinical confidence.

Our Primary Imaging Solutions are

the tools you

need, at the

time you need

them most.

Call us at

1-800-934-1034

or visit us on the web:

medical.konicaminolta.us

Our Sole Focus Is Primary Imaging…We’re Committed To Your Needs.

Konica Minolta. Right Solutions. Right Time.

Phone: 1 (800) 934-1034 Konica Minolta Medical Imaging

Website: medical.konicaminolta.us

KM 4840 Federal Buyers Guide 2014-2015.indd 1 4/29/14 2:29 PM

OUR MAJOR PRODUCT RANGE

Toll Free: (800) 325-0296Fax: (770) 458-5365 e-mail: [email protected] www.Railquip.com3731 Northcrest RoadSuite 6Atlanta, GA 30340

Quality engineered, state-of-the-art equipment:

Mobile and stationary car hoist system.

Body hoists and stands.

Spinning posts.

Truck hoists.

Turntables.

Drop tables.

Transfer tables.

Truck assembly and test stands.

Mobile / stationary waste removal systems.

Portable hydraulic rerailing equipment.

Plastic cable channels.

Portable car movers.

Toll Free: (800) 325-0296Fax: (770) 458-5365 e-mail: [email protected] www.Railquip.com3731 Northcrest RoadSuite 6Atlanta, GA 30340

Proudly supports all of your dental, medical, and supply needs.

Supporting your supply needs through the following contracts:

NEW! DLA ECAT Dental Program SPM2DE-14-D-7469DLA ECAT Lab Contract SPM2DE-10-D-7342DLA Medical/Surgical DAPA Holder SP0200-96-H-5014

FEDERAL SUPPLY SCHEDULES: Pharmaceuticals and Drugs (Anesthetics) V797P-2280D Dental Equipment and Supplies V797P-3160M

HENRY SCHEIN, INC. IS A PROUD FEDERAL SUPPLY SCHEDULE DISTRIBUTOR FOR:

Welch Allyn—Medical Equipment and Supplies V797P-4333B

Brewer Design Medical Equipment and Supplies V797P-3206M

KaVo Dental Equipment V797P-3218M

GYN Disposables V797P-4377B

Kerr V797D-30021

Imaging Sciences Dental Equipment V797P-3235M

Pelton & Crane Contract V797P-3241M

Busse Hospital Disposables—Medical Equipment and Supplies V797P-4488B

NO MSG NO fi llers NO binders NO additives

NO allergens NO gluten NO artifi cial ingredients

NO preservatives NO BHA NO BHT

NO sodium phosphate

NO propyl gallate

LOWER fat

LOWER sodium

For a FREE sample, contact Bryon Coleman at

[email protected] or 920-691-0230 today—

or visit JonesDairyFarmFoodservice.com to learn more.

© 2014 Jones Dairy Farm

Say yes to a better sausage.At Jones Dairy Farm, we’re dedicated to helping foodservice operations

offer better-tasting, better-made products. All-natural, quality products

like our lower-sodium pork sausage.

Made with 50% less sodium and certifi ed gluten-free, our sausages

are versatile enough to serve all day long and are completely free of,

well, all that other stuff. The same goes for our turkey, chicken and

beef products, too.

U.S. family owned and operated, Jones is also proud to offer

a guaranteed piece count with every order, as well

as peace-of-mind, safety-sealed packaging.

jdf005215_GovtSupplierAd.indd 1 7/18/14 9:53 AM

PROUDLY MADE IN THE USA

Monticello, Minnesota800.922.4138

www.electromn.com

www.sst.net • [email protected] • 586-293-5355

Services Quality Accreditations

Quick Overview:Quick Overview:Since 1956, Specialty Steel Treating has evolved to become theleader in precision heat treating and operates in six (6) different facilities totaling over 200,000 square feet of manufacturing space.As a company we pride ourselves in process innovation, supply chain management and customer service with keeping quality and integrity to our customers the number one priority. We are proudly serving the aerospace, automotive, off road truck and bus and medical markets along with several other niche segments.

Quality Accreditations• AS 9100• TS 16949• ISO 9001• Nadcap

Woman Owned Business

Services• Gas Carburize • Vacuum Carburize• Press & Plug Quench• Vacuum Heat Treat• Neutral Hardening• Gas Nitriding• And much more…

AUSA Member MADE IN U.S.A.

Toll-‐free: 1.866.587.6970

www.astralloy.com

Armor V2®

BP6:33®

MIL-‐DTL-‐46100E

MIL-‐DTL-‐12560K

PREFERREDBY THE

MILITARY

Astralloy_Govt_Mkt_Pkg_Ad_0115_v2.indd 1 1/27/15 10:59 AM

A Trusted Source to All Major U.S. Defense, Intelligence,

and Civilian AgenciesIT Infrastructure• Cabinets & Racks• Cabling & Panels• Power & Cooling • Testers & Tools• Remote Monitoring

High-Performance KVM• Desktop KVM Switches• KVM Extenders• KVM Matrix Switches• KVM-over-IP• Secure KVM

Specialty Networking• WAN Encryption• Ethernet Switches & Extenders• Media Converters• Power-over-Ethernet• Hardened Devices

AV & Digital Signage• AV-over-IP• Switches & Extenders• Scalers & Converters• Splitters & Cables• Digital Signage Systems

724-746-5500 | blackbox.com

GSA Schedule 70, Contract #GS-35F-0158J.Cage Code 59951, DUNS# 082254871, Federal ID# 25-1272662.

Black Box accepts all government purchasing cards.

Request a catalog: blackbox.com/FBG11

DeCon “U” ShowerAncillary Equipment

MITI Portable DeCon “U” Shower

FR In-Line Pressure Reducers

FSI Soap Injectors

High Pressure Manifolds

WYE Fittings

3183 HALL AVENUEGRAND JUNCTIONCOLORADO 81504

TOLL FREE866-545-6484

PHONE (970) 243-9500FAX (970) [email protected] All products GSA Approved GS 07F 5622R

MADE IN USA

877.998.1945www.birdbgone.com

Professional Bird Control Products

Partner with the company

that worksas hard

as you do.

1 – Superior Training

Free 1-day training at

Bird•B•Gone’s manufacturing

facility in Santa Ana, CA.

2 – Superior Products

Full line of products available:

bird spikes, bird netting,

electric track and more!

3 – Superior Service Our bird control engineers lead

the industry with more than 90

years of hands on experience.

Call today for detailed advice from the leading industry experts in bird control

The fastest weigh to zero waste.™

If your organization has a goal to achieve zero waste, then you need to know how you’re measuring up along the way. LoadMan can help by accurately weighing each and every load with 99% accuracy. But the measurement doesn’t stop there–you need data. LoadMan’s weigh-in-motion, on-board truck scale

system gives you an end-to-end solution. LoadMan’s fully automated system will let your drivers drive™ while collecting and sharing data in real time. And using LoadMan Load Management software, custom reports are just a few key strokes away. Start tracking your progress to zero waste today.

www.LoadMan.com 888.LoadMan (888.562.3626) [email protected]

It’s all about the data.™

Advancing cell and protein analysisAt Molecular Devices, we enable our customers to see more, do more, and know more with our innovative instruments, scientific expertise, assays, and analysis tools.

www.moleculardevices.com | 800.635.5577

© 2015 Molecular Devices. All rights reserved. The trademarks mentionedherein are the property of Molecular Devices, LLC or their respective owners.FOR RESEARCH USE ONLY. NOT FOR USE IN DIAGNOSTIC PROCEDURES.

• Microplate Readers

• Washers

• High Content Imaging Systems

• Microarray Scanners

• High Throughput Cellular Screening

• Cell Screening & Bioproduction

• Conventional and Automated Electrophysiology

• Assays and Reagents

Unleash your brilliance™

Panther provides Premium Logistics® solutions for the domestic and international movement of arms, ammunition and explosives.

With premium logistics services on six continents, Panther offers bulletproof SOPs, world-class tracking and tracing, and security-cleared personnel.

Transportation Protective Services:

Constant Surveillance Service (CIS)Dual Driver Protective Service (DDP)Protective Security Service (PSS)Security Escort Vehicle Service (SEV)Motor Surveillance Service (MVS)Satellite Motor Surveillance (SNS)

Call us today to find out how to best ship your high-risk, time sensitive freight.

Call (866) 455-8205.

www.pantherexpedite.com

ITARCOMPLIANT

Panther_DOD_Ad_FINAL.indd 1 6/28/12 4:20 PM

WHEN YOUR FLEET IS ON THE LINE,

YOU WANT ROTARY IN YOUR SHOP.

Rotary’s heavy-duty lift lineup is built to take on any challenge.For 90 years, Rotary has set the standard in design, testing and manufacturing. Our Indiana-based employees take pride in producing world-class lifts the right way, every day.

You can count on it.

Christine BilzGovernment Sales Leader1.800.445.5438 x5655

For more information and a complete guide to our product offering, visit us on the web at rotarylift.com.

Rotary World Headquarters2700 Lanier Drive Madison, IN 47250, USA

Shown: MCH418U100 with M140015 runway system attached

60,000 lbs. capacity

Shown: MOD35 MOD235xyz2-post inground lift

60,000 lbs. capacityTM

GS07F8953D

Rotary FED Buyers Guide ad file 2015.indd 1 2/12/2015 10:55:17 AM

Artista Gallery, Inc.Artista Gallery, Inc.Artista Gallery, Inc. 1004 Briarcliff Road1004 Briarcliff Road1004 Briarcliff Road

Warner Robins, GA 31088Warner Robins, GA 31088Warner Robins, GA 31088---405840584058 CAGE Code: 4QNL0CAGE Code: 4QNL0CAGE Code: 4QNL0 PH: (478) 320PH: (478) 320PH: (478) 320---250225022502 FX: (404) 420FX: (404) 420FX: (404) 420---289028902890

Email: [email protected]: [email protected]: [email protected] www.NewRetroDining.comwww.NewRetroDining.comwww.NewRetroDining.com www.NewRetroDesign.comwww.NewRetroDesign.comwww.NewRetroDesign.com www.NewRetroCars.comwww.NewRetroCars.comwww.NewRetroCars.com

www.NewRetroDining.com has mid century modern retro1950�’s style restaurant furniture and furnishings thatare nostalgic and Proudly Made in USA. Visit ourNewRetroDesign.com where you will find a full servicedesign team, and restaurant supply company. We possessa unique ability to execute custom designs at packagedesign prices because we are also the factory representatives for the seating and millwork manufacturers.This allows you to achieve factory direct pricing atan affordable price! We provide you with cost effective personalized service with a high attention toevery detail. We provide highly qualified designersand project managers who have practical, real worldrestaurant management experience and therefore willbest understand you and the Government�’s needs.

Chevie Chair Chevie Booth Set

•• •• •• •• •• •• •• •• •• •• •• ••

••

••

•• •• •• ••

Over 30 Years Providing Variable Temperature Materials

Characterization & Custom Cryogenic Solutions

2015

Co

mp

an

y

Ca

pab

ilit

ies

2015 Company Capabilities Proudly Presented to:

From:

Col. Richard Pember, US Army Retired

CEO

US Headquarters

2802 Flintrock Trace, Suite 201, Austin, Texas 78738

US Telephone: (512) 366-8122

[email protected]

www.jdandersonglobal.com

Middle East Office

Chamber of Commerce Building, 5th Floor, Al-Fanateer Square,

Jubail Industrial City, Kingdom of Saudi Arabia

Telephone: +966 13 343 9412

Fax: +966 13 343 9418

Confidentiality Statement

THIS DOCUMENT AND THE INFORMATION IN IT ARE PROVIDED IN CONFIDENCE, FOR

THE SOLE PURPOSE OF DETERMING CAPABILITIES AND MAY NOT BE DISCLOSED TO

ANY THIRD PARTY OR USED FOR ANY OTHER PURPOSE WITHOUT THE EXPRESS

WRITTEN PERMISSION OF JD ANDERSON & ASSOCIATES.


http://www.jdandersonrecruiting.com/

Confidential • JD Anderson & Associates 2015 Company Profile • Table of Contents • Page i - 1

JD Anderson & Associates • 2802 Flintrock Trace, Suite 201, Austin, Texas 78738 • Telephone: (512) 366-8122

Table of Contents

1.0 Company ..................................................................................................... 1-1

1.1 Company Overview ................................................................................................................... 1-1

1.2 Mission Statement ..................................................................................................................... 1-1

1.3 Values ......................................................................................................................................... 1-1

1.4 Global Presence ........................................................................................................................ 1-2

1.5 Office Locations ........................................................................................................................ 1-3

1.6 US Government/Corporate Identifiers ...................................................................................... 1-4

1.7 SDVOSB Certifications & Small Business Programs ............................................................. 1-4

1.8 Our Partners, Joint Ventures & other Key Alliances ............................................................. 1-5

1.9 Facilities Clearance .................................................................................................................. 1-7

1.10 EEO Statement & Policy ......................................................................................................... 1-7

1.11 Health, Safety & Security ........................................................................................................ 1-8

1.12 Health & Safety Management System ISO:18001 ................................................................ 1-8

1.13 Quality Management System ISO:9001 .................................................................................. 1-9

1.14 Environmental Management System ISO:14001 ................................................................... 1-9

1.15 Associations & Consortiums ................................................................................................ 1-10

1.16 Corporate Philanthropy ....................................................................................................... 1-10

2.0 Key Management Team .............................................................................. 2-1

2.1 Company Ownership ................................................................................................................. 2-1

2.1.1 Chief Executive Officer (CEO) .............................................................................................. 2-1

2.1.2 President – US Department of Defense Service Disabled Veteran (SDV) ............................. 2-1

2.1.3 Chief Operations Officer (COO) ............................................................................................ 2-2

2.1.4 Chief Financial Officer (CFO) ............................................................................................... 2-3

2.2.5 Chief Information Officer (CIO) ............................................................................................. 2-3

2.1.6 Director of Middle East EPC Management ............................................................................ 2-4

2.1.7 Director of Middle East EPC Business Development ............................................................ 2-5

2.1.8 Director of IT Management Services – US Office .................................................................. 2-5

2.1.9 Operations Manager ............................................................................................................ 2-6

2.1.10 Director of IT Recruitment .................................................................................................. 2-6

2.1.11 Director of EPC Recruitment .............................................................................................. 2-6

Confidential • JD Anderson & Associates 2015 Company Profile • Table of Contents • Page i - 2


3.0 Products & Services................................................................................... 3-1

3.1 Our Services .............................................................................................................................. 3-1

3.2 Sample IT, Engineering & Construction Contract Staffing & Permanent Placement ............ 3-2

3.3 Information Technology Management Services ..................................................................... 3-2

3.4 Commercial Construction Management ................................................................................. 3-2

3.5 Civil Construction Management .............................................................................................. 3-3

3.6 Energy Construction & Process Management ....................................................................... 3-4

3.7 Engineering & Design Management ........................................................................................ 3-4

3.8 Management, Scientific, and Technical Consulting Services ............................................... 3-5

3.9 Facilities Management .............................................................................................................. 3-5

4.0 References .................................................................................................. 4-1

Confidential • JD Anderson & Associates 2015 Company Profile • Page 1 - 1


1.0 About Us

1.1 Company Overview

JD Anderson & Associates is a Service-Disabled Veteran-Owned Small Business (SDVOSB) specializing in IT, Engineering & Construction Management Services, Contract Staffing & Permanent Placement solutions. Our SME Advisory & Management expertise and focus include the following Industries:

IT, Engineering & Construction Recruiting

Information Technology Management

Commercial & Industrial Construction Management

Civil Construction Management

Energy Construction & Process Management

Engineering & Design Management

Management, Scientific & Technical Consulting Services

Facilities Management Finally, JD Anderson & Associates are approved for participation in the US Department of Defense, Small Business Administration and American Corporate Partners Mentor-Protégé Programs.

Additional Certifications: US Department of Veteran’s Affairs (VA) – Certified National Minority Supplier Development Council (NMSDC) – Certified The South Central Texas Certification Agency - Certified

1.2 Mission Statement JD Anderson & Associates will be a leader in providing value-added services to our customers by creating a successful partnership with them throughout their Program or Project requirements. Our pledge is to establish lasting relationships with our customers by exceeding their expectations and gaining their trust through exceptional performance by every member of the JD Anderson & Associates Team.

http://www.acq.osd.mil/osbp/sb/programs/mpp/

https://www.sba.gov/content/mentor-protege-program

https://www.sba.gov/content/mentor-protege-program

http://www.acp-usa.org/

http://www.vetbiz.gov/

http://www.nmsdc.org/

http://www.sctrca.org/applications.asp



1.3 Values We want to be the first choice for Clientele seeking Expert IT, Engineering & Construction Management Services and Contract Staffing & Permanent Placement solutions with a reputation for exceptional ethics, expertise, and client focus. We want to continue to attract and retain great people, drawn by our reputation for innovation, opportunity and an enjoyable and satisfying work environment. We want to be valued as model corporate citizens by all the communities in which we operate, with a reputation for generosity, responsiveness, and wise stewardship.

1.4 Global Presence

JD Anderson & Associates focus their management services and recruiting efforts in the US, Middle East/N. Africa (MENA) & Near/Far East.

2015-2016 JD Anderson & Associates Service Area

1.4.1 2015-2016 Coverage Area: USA, Afghanistan, Algeria, Angola, Bahrain, China, Cyprus, Djibouti, Egypt, India, Indonesia, Iraq, Israel, Jordan, Kuwait, Lebanon, Libya, Malaysia, Morocco, Nigeria, Oman, Pakistan, Palestine, Philippines, Qatar, Saudi Arabia, South Korea, Syria, Tunisia, Turkey, UAE & Yemen.



1.5 Office Locations

1.5.1 US Headquarters: JD Anderson & Associates maintains offices in Austin, Texas and Jubail, Saudi Arabia. US Headquarters: 2802 Flintrock Trace, Suite 201 Austin, Texas 78738 US Telephone: (512) 366-8122 www.jdandersonglobal.com

Middle East Office: Chamber of Commerce Building 5th Floor, Al-Fanateer Square, Jubail Industrial City, Kingdom of Saudi Arabia Telephone: +966 13 343 9412 Fax: +966 13 343 9418

https://www.google.com/maps/place/2802+Flintrock+Trace+%23201,+Austin,+TX+78738/@30.3364463,-97.9714163,17z/data=!3m1!4b1!4m2!3m1!1s0x865b39cde0e54b23:0xa94b7f66f1c81ef5

http://www.jdandersonglobal.com/

https://www.google.com/maps/place/Chamber+of+Commerce/@27.128458,49.568676,15z/data=!4m2!3m1!1s0x0:0x74f19bbc8b373f71?sa=X&ei=LeC7VJjaF6vnsAT33IDYDg&ved=0CHkQ_BIwCw



1.6 US Government/Corporate Identifiers Founded: 2014 EIN: 46-5239958 Texas LLC: 801972349 DUNS: 079353633 CAGE: 748U6

1.7 Our Partners, Joint Ventures & other Key Alliances JD Anderson & Associates have reached out to their colleagues at the following companies for Partnering/Teaming opportunities and other services.

Business References Company Contact

Banking

Wells Fargo Bank, NA

Katherine (Pong) Chitwood - Personal Banker

2301 Ranch Road 620 South, Lakeway, Texas 78734

Phone: 512-263-5395

DBA Insurance (Government Works)

Worldwide Risk Management

Jason Allen, FIC, RHU - President 949 Brighton Ave., Portland, ME 04102

Phone (US): 207-878-2510 Phone (Outside): 207-576-3201

Fax: 207-221-1067

Recruiting Technology

Bullhorn Meredith Cook

Phone: 617.478.9107

Construction Teaming Agreements

MAC Middle East & N.

Africa

Elie Abdallah – Sr. VP MAC Construction

(Modern Arab Construction Co. Ltd.) Salahuddin Al-Ayoubi Street

P.O.Box 855 Al-Khobar 31952

Saudi Arabia Tel: 966-3-882 2233 Fax: 966-3-882 5804

WRA & Associates Afghanistan/

Pakistan

Steve Cole Mobile: +44-7547-38-1966 Skype-stephen.cole5757

http://www.bullhorn.com/


http://macconstruct.com/

http://macconstruct.com/





Shaheen Traders Pakistan

Syed Zulnurain Shah Director Business Development Tir Andaz Market, 1-Bull Road,

Lahore-Pakistan Tel: +92 42 37651319

Mob: +92 321 7788882

UT3 LTD. Pakistan

David Crawford Blackrock House, 2 Millar Crescent

Edinburgh, EH10 5HW, UK Tel +44 131 4472899

Fax +44 131 4477026 / 4529061

SAQR AL-KHYALA GROUP

Middle East Business

Development

Mohammed Ashraf International Business Development

Phone: +966 12 6723062 Jeddah, KSA

American Iraqi Food Company &

Al Sabbour Commercial

Agencies Ltd - Iraq

Dr. Ali Alobaidi Senator “Kit” Christopher S. Bond

Jason Van Eaton President and Founder

Mobile Iraq: 011-964-7904-287314 Tel: 011-964-7706-630556 Mobile USA: 405-762-2562

IT Teaming Agreement

SRA International 4300 Fair Lakes Court

Fairfax, VA 22033 (703) 803 - 1500

Facilities Teaming Agreement

Varsity Facility Services

Varsity Facility Services 1055 South 3600 West

Salt Lake City, UT 84104 888.888.1130

Design Teaming Agreements

Robert & Company

Brian Kluttz 229 Peachtree Street N.E.

International Tower Suite 2000

Atlanta, GA 30303 Phone: 404.577.4000

MWH Global 380 Interlocken Crescent, Suite 200

Broomfield, CO 80021 USA Tel: +1 303 533 1900

Steel Buildings

http://www.shaheen.com.pk/


http://ut3group.com/company_profile.html


http://www.saqrgroup.com/

http://www.saqrgroup.com/


http://www.aifciraq.com/

http://www.aifciraq.com/


http://www.sra.com/

http://www.varsityfs.com/

http://www.varsityfs.com/

http://www.robertandcompany.com/


http://www.mwhglobal.com/



Olympia Steel Buildings

Mr. Arnold Davis - CEO 400 Island Avenue

McKees Rocks, PA 15136 Toll Free 1- 888-449-7756

HV Electrical Supply

Melec Group

Sandra Wehbe Ghorfine Main Rd.

Jbeil, Lebanon (961) 9 621 030/31/32

Security Systems

Point Security 677 W. Front St. Hutto, TX 78634 512-252-1100

Communications

ICS Robert A. Foehrkolb

512-433-4706

Personnel Security

OAM Glenn Towill

+61 8 9242 8111

Tactical Solutions International

Brian Bewley President/CEO

177 Burris Lenore Road, Crowheart, Wyoming 82512 USA

Phone : (307) 486-2336 Fax : (307) 486-2337

1.8 Facilities Clearance (DSS)

JD Anderson & Associates maintains a Defense Security Service Facilities Clearance for our US Headquarters Office. The Facilities Clearance is required by several of our Clients for accessing their Classified IT, Engineering & Construction Management & Staffing requirements.

http://www.olympiabuildings.com/

http://www.olympiabuildings.com/



http://www.pointsecured.com/

http://www.ics-com.net/


http://oam-group.com/


http://www.tacticalsolutionsintl.com/

http://www.tacticalsolutionsintl.com/

http://www.dss.mil/isp/fac_clear/fac_clear.html



1.9 EEO Statement & Policy

It is the policy of JD Anderson & Associates to provide equal employment opportunity (EEO) to all persons regardless of age, color, national origin, citizenship status, physical or mental disability, race, religion, creed, gender, sex, sexual orientation, gender identity and/or expression, genetic information, marital status, status with regard to public assistance, veteran status, or any other characteristic protected by federal, state or local law. In addition, JD Anderson & Associates will provide reasonable accommodations for qualified individuals with disabilities. JD Anderson & Associates goal is to increase representation of women, people of color, veterans and individuals with disabilities. Our programs are designed to comply with all applicable federal, state and local laws, directives and regulations and cover all human resource actions including employment, compensation, benefits, training, education, tuition aid, transfers, promotions and social/recreational programs. JD Anderson & Associates CEO and senior leadership team regularly receive and review affirmative action reports and have the responsibility to monitor progress, reinforce policies and hold the organization accountable to meet objectives. Responsibility Bobby Anderson, Chief Operations Officer, and his designee, Karolina Stanley – Operations Manager are responsible for leading JD Anderson & Associates affirmative action efforts and ensuring that the principle of equal employment opportunity is understood and followed. The HR head for each JD Anderson & Associates establishment is responsible for local affirmative action efforts. All members of management must be familiar with this policy, must fully support it, and are responsible for applying these principles in good faith. All employees are responsible for conduct consistent with JD Anderson & Associates EEO Policy and are expected to demonstrate respect for all co-workers. JD Anderson & Associates posts this statement to inform applicants and employees of JD Anderson & Associates commitment to equal opportunity in employment. The Affirmative Action Plans for: Women and Minorities; Individuals with Disabilities; and Protected Veterans are located in local HR offices and may be reviewed by applicants and employees on weekdays during normal working hours.

This space intentionally left blank. Please refer to next page.



1.10 Health, Safety & Security

JD Anderson & Associates policy is to conduct business in a manner that protects people, assets, intellectual property, and the environment. This commitment is facilitated through a management system for Health, Safety, Environment, and Security that promotes:

Line management and employee accountability, commitment, and individual contribution

Measurable goals and plans for continual improvement aimed at zero incidents; conservation of energy, water and other resources; reduced emissions; and the prevention of pollution

Integration of Health, Safety, Environment, and Security matters into all business activities

Identification and effective management of Health, Safety, Environment, and Security risk

Provision of training, controls, and protective measures based on sound assessment of personal health and safety, equipment and process safety, workforce and asset security, and environmental and social responsibility

Collaboration with customers, regulators, contractors, suppliers, and community leaders to improve overall performance

Compliance with applicable legislation, regulations, and industry standards

A culture where Stop Work is an individual obligation and a company responsibility

Asset integrity (traceability and preventative maintenance), equipment design, and lifecycle management

Audit and review of systems and communication of performance

Understanding of crisis alert levels, response plans, and the crisis management process

Protection of all JD Anderson & Associates intellectual property

Allocation of appropriate resources to implement this policy JD Anderson & Associates is a responsible corporate citizen committed to the protection of people, the environment, and company resources, while supplying products and services in a sustainable manner. This commitment adds value to employees, customers, shareholders, and communities. This policy is made available to employees, customers, contractors, suppliers, and the public.

1.11 Health & Safety Management System ISO:18001

JD Anderson & Associates has completed their requirements for its ISO:18001 Health & Safety Management System. The system provides the following benefits:

Minimizing the risks of delays

Providing a safe environment to do business

Demonstrating our commitment to maintain an effective health and safety policy

It will make our organization more efficient, able to meet its legal requirements and help to improve staff morale by making the workplace a safer environment to work in.



Improving our reputation and increasing our opportunities to gain new business

Minimizing risks of downtime through accidents

Demonstrating our commitment to meet legal obligations

Possible cost savings from public liability insurance premiums

Maintaining compliance to legal requirements

Providing a robust system to maintain and continually improve health and safety

1.12 Quality Management System ISO:9001

JD Anderson & Associates has completed their requirements for its ISO:9001 Quality Management System. The system provides the following benefits:

Cost Savings – Optimize our operations and therefore improved our bottom line.

Enhanced Customer Satisfaction – Improve quality, enhance our customer satisfaction and our increase sales.

Access to New Markets – Prevent trade barriers and open up global markets.

Increased Market Share – Increase our productivity and competitive advantage.

Environmental Benefits – Reduce negative impacts on the environment.

1.13 Environmental Management System ISO:14001

JD Anderson & Associates has completed their requirements for its ISO:14001 Environmental Management System. The system provides the following benefits:

Cost savings in waste, recycling and consumption

Advantage over competitors when tendering for business

Management of environmental risks

Compliance with individual countries environmental regulations

Demonstrates our commitment to improving the environment

Shows we are a responsible future focused organization

Can reduce insurance cover costs

Can increase employee engagement in the knowledge that they are working in an environmentally friendly organization



1.14 Associations & Consortiums

1.16 Corporate Philanthropy

JD Anderson & Associates and its Partners volunteer a substantial amount of their time and resources to support Charity:Water, the American Red Cross and Habitat for Humanity to raise awareness and funding to support their efforts in the US and abroad.

This space intentionally left blank. Please refer to next Section.

http://www.charitywater.org/

http://www.redcross.org/

http://www.habitat.org/



2.0 Key Management Team

2.1 Company Management

2.1.1 Chief Executive Officer (CEO) Colonel Richard Pember – US Army Retired US Headquarters & Middle East Office (US Headquarters Primary)

Colonel Richard Pember – US Army Retired maximizes profits and returns on invested capital by accomplishing objectives, serving customers, maintaining the company's stability, ensuring growth and building and maintaining organizational reputation in the community.

Richard is a retired US Army Colonel with 30 years of large capacity leadership, team building, and management experience. 20 of these years have been within Construction Project & Program Management.

He has a Bachelor’s and Master’s Degree in Mechanical Engineering. He holds an Active Top Secret Security Clearance and his geographical experience includes the US & Middle East. 2.1.2 President – US Department of Defense Service Disabled Veteran (SDV)

Jeff Anderson – USAF Retired US Headquarters







Jeff Anderson manages the day to day operations of the US office and also focuses on background investigations for Candidate Security Clearances and the Security and Safety of all JD Anderson & Associate Team Members in the US & OCONUS. Jeff has retired from both the USAF, as an Active/Reserve Superintendent (E-8) and the Travis County Sheriff’s Office, as the Supervisor over Criminal Investigations. He brings with him 21 years of Active Duty & Reserve military leadership experience and 26 years of civilian law enforcement leadership experience. Jeff maintains an Active Security Clearance and holds a Bachelors of Criminal Justice & Business Administration. Additionally, he has advanced Certifications in Criminal Justice & Emergency Management thru the FBI, USAF & FEMA. His geographical experience includes the US, Middle & Far East.

2.1.3 Chief Operations Officer (COO) Bobby Anderson, PMP, MSA – Subject Matter Expert US Headquarters & Middle East Office (Middle East Office Primary)

Bob Anderson provides the leadership, management and vision necessary to ensure that the company has the proper operational controls, administrative and reporting procedures, and people systems in place to effectively grow the organization and to ensure financial strength and operating efficiency. His position accomplishes this through a respectful, constructive and energetic style, guided by the objectives of the company. Bob has over 20 years of experience and progressive responsibilities in Construction, Health & Safety (HSE) and Geographic Information Systems (GIS). His geographical experience includes the US, Middle/Near East and North Africa. He has a Bachelor’s degree in Construction Management & a Master’s degree in Business Management & Organizational Security. He maintains an Active Secret Security Clearance. Bob assists with the day to day operations of the US & Middle East office.





2.1.4 Chief Financial Officer (CFO)

Michele McDaniel - Subject Matter Expert US Headquarters (Middle East as Required)

Michele McDaniel develops financial well-being of the organization by providing financial projections and accounting services; drafting contracts, preparing growth plans and directing staff as required. Michele has over 25 years of progressive experience in Contracts and Finance with some of the world’s top Engineering & Construction firms, the US Government & World Bank. Her background includes Communications, Civil, Commercial, Industrial, Institutional & Military Design-build Engineering & Construction in the US, Middle & Near East. She has a Bachelor’s in Business Administration and Accounting and a Certification in Advanced Contracts Management. She also maintains an Active SECRET Security Clearance. 2.1.5 Chief Information Officer (CIO)

Michael Clark – Subject Matter Expert US Headquarters

Michael Clark is responsible for developing and executing company sales and marketing plans, including implementing new ideas and tools for the company in the US. He will provide direction and planning for the company and oversee the IT workings of the US Headquarters Office. Michael secures contracts with new customers, as well as manages ongoing contracts. He also writes proposals for new and existing clients, identifies and sets company goals, and creates plans to achieve goals. Finally, he develops and maintains our network of contacts within and outside of the company.






Michael has over 20 years of experience and progressive responsibilities in the Defense, Finance and Aerospace IT Consulting and Project Management sectors throughout North America. Michael has a Bachelor's Degree in Journalism from Arizona State University and is a Cisco Certified Sales Expert. Michael and his wife Kim are dog lovers and proud parents of their son, who is attending the University of Florida. 2.1.6 Director of Middle East EPC Management

Sam Brumfield – Subject Matter Expert Middle East Office

Sam Brumfield sets goals, monitors international work and evaluates the results to ensure that company objectives and operating requirements are met and consistent with the needs and vision of JD Anderson & Associates.. He delivers top and bottom line results required by the company on an annualized basis and performs additional assignments as required by the needs of the company as directed by the COO. Sam is a talented and decisive Project Manager and Director offering over 27 years of business acumen and outstanding success in roles involving multi-agency coordination to include construction, medical facilities, utility and O&M management programs.

Sam has taught operations & maintenance courses and has degrees in Ecological Controls, Maintenance Production Management, and Human Resources Management. He also possesses Master’s degree in Management with a Project Management focus. He is also a Member of the Project Management Institute (PMI) and the Construction Management Association of America (CMAA). His geographical experience includes the US, Middle & Far East and maintains a Secret Security Clearance.

This space intentionally left blank. Please refer to next page.




2.1.7 Director of Middle East EPC Business Development

Allen Gilbert – Subject Matter Expert Middle East Office

Allen Gilbert is responsible for developing and executing company sales and marketing plans, including implementing new ideas and tools for the company in the Middle East. He provides direction and planning for the company and oversees the workings of the Middle East Office and works closely with our Middle East Commission-Based Sales Staff. Allen secures contracts with new customers, as well as manage ongoing contracts. He also writes proposals for new and existing clients, identifies and sets company goals, and create plans to achieve goals. Finally, he develops and maintains our network of contacts within and outside of the company. Allen has over 20 years of experience in Logistics, Construction Management and Business Development with the past 8 years spent in the Middle East & Southwest Asia supporting various U.S. Military projects. Allen holds an Active Secret Security Clearance and will be in charge of all EPC Business Development for the company in the Middle East.

2.1.8 Director of IT Management Services

Ray Martinez – Subject Matter Expert US Headquarters







Ray Martinez directs, supervises, and governs all IT corporate projects in the US. He reviews proposals to

determine costs, timeline, funding, staffing requirements, and goals. He oversees the work of Project

Managers and their Project Teams. He reports directly to the COO.

Ray is a world-class IT Project Manager with an outstanding track record of delivering cutting edge

solutions for mission critical systems on time and on budget. He has an excellent track record successfully

leading multiple projects simultaneously with a broad technical breadth to provide a unique vision for

problem solving, and strong technical depth in infrastructure development, QA and automated deployment

to achieve high quality results. He has an in-depth knowledge of systems analysis, design, implementation,

integration, and testing.

He is a retired US Marine with a Master’s of Science (MS) in Information Systems and maintains an active

TSI.

2.1.9 Operations Manager

Karolina Stanley – Subject Matter Expert US Headquarters

Karolina Stanley manages the day-to-day operations and activities of the Headquarters Office and assists with the Middle East Office activities (remote) as required. She assists in evaluating current and proposed systems and procedures and recommends changes when necessary and assists in implementation of the new processes. Finally, she supervises office activities to achieve maximum expense control and productivity and assist all departments as required. Karolina has over 15 years’ experience with Government/Military contracting at various locations within the United States and has served as the liaison of sensitive military operations in Middle Eastern Countries. She has a Bachelor's degree in Systems Engineering, Certifications in Program Management and Logistics with Defense Acquisition University. She has a unique employment history with extensive knowledge of U.S. State Department National and International regulations. Karolina maintains an Active Secret Security Clearance. Karolina will manage the operations and handle the accounting for the Austin, Texas Headquarters Office. 2.1.10 Director of IT Recruitment Carter Einhorn – Subject Matter Expert US Headquarters





Carter Einhorn is responsible for managing, mentoring & training the IT Recruitment Department. As a Technical Recruiter, he screens, interviews, and recommends prospective employees for employment in entry-level and experienced technical positions to our Clientele. He works with Clients, identifies their needs and determines the optimum recruitment methods to develop and maintain a highly qualified candidate pool. He achieves staffing objectives by recruiting and evaluating job candidates; advising managers; managing relocations and intern programs. Carter has 23 years of progressive responsibilities of recruiting leadership in IT professional services organizations, staffing agencies, Oil and Gas, Construction, Engineering, Energy, and Municipal Governments. His experience is focused on Canada, United States, Australia and Asia Pacific. He degreed in Business Systems and Computer Programming. He is certified in Performance Based Hiring and Strategic Workforce Planning. 2.3.5 Director of EPC Recruitment

Armand Daniels – Subject Matter Expert US Headquarters

Armand Daniels is responsible for managing, mentoring & training the EPC Recruitment Department. As a Technical Recruiter, he screens, interviews, and recommends prospective employees for employment in entry-level and experienced technical positions to our Clientele. He works with Clients, identifies their needs and determines the optimum recruitment methods to develop and maintain a highly qualified candidate pool. He achieves staffing objectives by recruiting and evaluating job candidates; advising managers; managing relocations and intern programs.




Armand has over 15 years of experience in the Engineering & Construction industry. He has over 8 years technical recruiting and business development experience in building solid relationships with companies from start-up to multi-billion/multi-national corporations.

Armand has a natural ability to find a balance between the highly qualified candidate's career goals and the client's mission critical needs. Through his efforts, he continuously strives to ensure a mutually beneficial and successful future for all parties involved.

This space intentionally left blank. Please refer to next section.



3.0 Products and Services

3.1 Our Services 3.1.1 Our Primary Services include:

IT, Engineering & Construction Contract Staffing & Permanent Placement

Information Technology Management

Commercial & Institutional Construction Management

Civil Construction Management

Energy Construction & Process Management

Engineering & Design Management

Management, Scientific & Technical Consulting Services

Facilities Management 3.1.2 Other Value Added Services: Background Investigations – Upon request, we will provide comprehensive Background Investigations for our Clientele. Logistics - Upon request, we will provide relocation & package assistance including Moving, Storage, Insurance, Payroll, Taxes, Visas, Transportation, Housing and all other required Life Support following selection & placement. Miscellaneous

• Drug Screening

• Assessment Testing

• Salary Trending by Location, Industry & Position

• Training & Resource Development

3.2 Sample IT, Engineering & Construction Contract Staffing & Permanent Placement Positions

541612 Human Resources Consulting Services

561311 Employment Placement Agencies

561312 Executive Search Services

561320 Temporary Help Services

561330 Professional Employer Organizations

The following reflects ongoing employment opportunities that JD Anderson & Associates recruits for both

the US & International marketplaces. We recruit from the same pool for our IT, Engineering &

Construction Management Services projects.

Information Technology Contract Staffing & Permanent Placement

C-Level • Mobile Application Developers • Data Architects • Business Intelligence Analysts • Technical

Engineers • Wireless Network Engineers • Software Development Product Managers • Software

Engineers • Software Developers • Practice Managers • Project Managers • Senior IT Auditors • Systems

Security Analysts

http://www.census.gov/cgi-bin/sssd/naics/naicsrch?code=541612&search=2012%20NAICS%20Search







Engineering & Construction Contract Staffing & Permanent Placement

C-Level • Program and Project Managers • Architects & Engineering • Operations • Contracts • O&M •

HSE • Security • Controls • Instrumentation • Commissioning • QA/QC • Proposals • Business

Development • Facilities • Fit Out • Scheduling • Cost • Procurement • Logistics

3.3 Information Technology Management Services

JD Anderson & Associates support the entire life cycle of our customers' IT systems, including

infrastructure services, software and systems development, cyber security, cloud computing, business

intelligence, big data and mobile solutions.

In addition, we provide customers with an extensive array of Professional Services focused on helping

leaders and organizations define vision and strategy, navigate complex change, and achieve new levels

of performance.

Our expertise across this wide range of domains will help our customers develop and integrate

innovative, relevant and creative solutions to address their toughest operational challenges.

518210 Data Processing, Hosting, and Related Services

541511 Custom Computer Programming Services

541512 Computer Systems Design Services

541513 Computer Facilities Management Services

541519 Other Computer Related Services

3.4 Commercial Construction Management

JD Anderson & Associates and their Subject Matter Expert (SME) Team Member’s Construction

Management backgrounds are quite diverse. Our Team Members have overseen and managed many

complex projects throughout the US, Middle East/North Africa (MENA) and Asia. This includes various

Commercial, Civil, MEP & EPC projects.

Additionally, JD Anderson & Associates has teamed with many US & Foreign General Construction

Contractors that have passed our rigorous Pre-Qualification process. Please refer to Section 1 for a

partial list of these Firms.

Retail/Commercial • Residential • Institutional • Industrial • Educational • Medical • Military

236115 New Single-Family Housing Construction

236116 New Multifamily Housing Construction

236210 Industrial Building Construction

236220 Commercial and Institutional Building Construction Residential

Apartments

Apartments (CAN)

Condominiums

Residences (CAN)

Townhomes

Single Family (Custom)

Single Family (Tract)

Educational

Elementary & Preschools

Jr & Sr. High Schools

Educational (CAN)

Special Schools

Classrooms

Cafeterias

School Auditoriums

School Laboratories

Dormitories

Vocational Training

College/University Misc.

Medical

Hospitals/Clinics

Hospitals (CAN)



Medical Offices

Medical Bldgs. (CAN)

Nursing Homes

Retail/Commercial

Automotive

Bank Branches

Broadcast Studios

Food Stores

Funeral Homes

Hotels/Motels

Individual Stores

Motor Vehicle Services (CAN)

Movies/Entertainment

Museums

Offices

Offices (CAN)

Office/Warehouse

Recreational Buildings (CAN)

Restaurants

Retail/Wholesale Services

(CAN)

Shopping Centers

Shopping Centres (CAN)

Arenas & Convention Centers

Institutional

Clubs & Community Centers

Courthouses

Defense/Law Enforcement

(CAN)

Fire/Police Stations

Government Offices

Governmental Offices

Government Misc

Gyms & Athletic Buildings

Libraries

Parking Garages

Park Buildings

Post-Offices

Prisons

Public Buildings (CAN)

Religious Auditoriums

Religious Buildings (CAN)

Military

Military Housing

Military Offices

Military Miscellaneous

Industrial

Agricultural

Laboratories

Manufacturing

Manufacturing (CAN)

Oil Refineries

Processing Plants (CAN)

Rental Warehouses

Transportation Terminals

Warehouses

Warehouses (CAN)

Other

Communications Distribution

Electrical Work

Machinery & Supplies

3.5 Civil Construction Management Roads & Bridges • Communications • Water & Sewer • Transportation • Site Work & Landscaping

237110 Water and Sewer Line and Related Structures Construction

237210 Land Subdivision

237310 Highway, Street, and Bridge Construction

237990 Other Heavy and Civil Engineering Construction

541360 Geophysical Surveying and Mapping Services

Roads & Bridges

Bridges

Bridges & Culverts

Pavement Markers

Roads

Sidewalks, Curbs & Gutters

Tunnels

Water & Sewer

Sewers, Watermains (CAN)

Sewage & Water Plants

(CAN)

Water & Sewage Piping

Water & Sewage Treatment

Transportation

Airport Construction

Marine Work

Marine Eng (CAN)

Passenger Terminals (CAN)

Railroad/Subway

Railroads (CAN)

Tunnels & Subways (CAN)

Sitework & Landscaping

Athletic Fields & Courts

Demolition

Excavating & Grading

Fencing

Flood Control

Parks/Landscaping

Sitework

Other Civil

Dams

Dams & Canals

Military Non Building

Tanks



3.6 Energy Construction & Process Management Coal • Electric • Natural Gas • Nuclear • Petroleum • Renewable (Hydroelectric, Wind, Solar & Alternative)

237120 Oil and Gas Pipeline and Related Structures Construction

237130 Power and Communication Line and Related Structures Construction

213112 Support Activities for Oil and Gas Operations

213113 Support Activities for Coal Mining

213114 Support Activities for Metal Mining

213115 Support Activities for Nonmetallic Minerals (except Fuels) Mining

3.7 Engineering & Design Management JD Anderson & Associates provides Sole-Source Solutions for the following:

Architectural • Civil • Structural • Electrical • Mechanical • Chemical • Industrial • Environmental • Health, Safety &

Security

541310 Architectural Services

541320 Landscape Architectural Services

541330 Engineering Services

541410 Interior Design Services

541420 Industrial Design Services

541490 Other Specialized Design Services

541620 Environmental Consulting Services

3.7.1 MILCON

Architecture

Laboratory Design

Clinics/Hospitals

Industrial Manufacturing

Distribution Facilities

Academic Buildings

Military Works

Engineering

Civil

Structural

Mechanical

Electrical

Hydro

Maritime

Process

IT

Communications

Commercial Aviation

Services

Airport Fueling System

Design

Airfield Runway and Taxiway

Design

Aircraft Hangar Design

Maintenance Bay Design

Fuel Control Center Design

Refueler Station Design

Military Services

Fuel System Design

Aircraft Fueling Systems

Air Field Design Services

Runway and Taxiway Design

Aircraft Maintenance Hangar

Design

All Base Designs

General Aviation

Airport Master Plan and

Layout

Airfield Pavement Rehab

Airfield Drainage

Approach Lighting

Instrument Landing System

(ILS)

Air Traffic Control Towers

Runway and Taxiway

Widening

Aircraft Parking Aprons

Navigational Aids (NAVAID)

Terminal Building

Improvements

Hangars

Ground Access

Auto Parking Lots

Fuel Storage Facilities

Security Fencing

Heliports

Automated Weather

Observing System (AWOS)

Planning

Comprehensive Land Use

Plans

Downtown Master Plans

Urban Design

Studies/Guidelines

Corridor Studies



Zoning and Form-Based

Codes

Urban Redevelopment Plans

Campus Master Plans

Historic Preservation Studies

Park and Recreation Plans

Community Visioning

Landscape Design

General site design, planning

and analysis

Master Planning

Institutional Design

Public/Civic Design

Streetscape Design

Recreational Design

Corridor Studies

Bicycle and pedestrian

Facility Design

Environmental Assessments

Transportation

Enhancements (TE) and

SPLOST-funded projects

Historical Preservation

Master Plans for Historic

Landscapes and Gardens

Historic Structure Reports

Cultural Landscape Reports

Historic Cemetery Master

Plans and Preservation

Studies

Site Restoration Plans

Preservation Plans for

Historic Downtowns,

Neighborhoods and

Communities

Historic Preservation Studies

Master Plans for Botanical

Gardens, and Arboretums

Garden Conservancy

Historic Landscape

Inventories

Consultation Services for

Historic Sites

Green (LEEDs) Design

Sustainable Site Design

Rain Water and Run Off

Contamination Prevention

Stormwater Drainage

Overflow Protection

Erosion Prevention

Hazardous Spill Prevention

and Capture

Recycling Facilities

Waste Management

Waste Water Processing

Contaminated Earth

Sterilization

Bio-Swale Design

Rain Garden Design

Natural Resource Protection

Cathodic Protection 3.7.2 Water/Energy

Clean Energy & Sustainability Coastal, Ports & Waterways Dams Hydropower Mining Oil & Gas Pipelines & Tunnels Power Delivery Remediation & Closure Transportation Water Resources Water Treatment Water/Wastewater Treatment Wet Weather/Storm water

3.8 Management, Scientific, and Technical Consulting Services

541611 Administrative Management and General Management Consulting Services

541690 Other Scientific and Technical Consulting Services

3.9 Facilities Management

561210 Facilities Support Services

JD Anderson & Associates provide an optimum mix of Facility Management services including "in-house"

& "sub-contracted" services to suit the Client's specific needs.

After understanding the nature & scalability of services required we propose flexible facility management

organizations, ones designed to meet changing business requirements as they occur.

Finally, we will provide these Management Services to government-owned and commercial buildings.

Our services include, but are not limited to, IT, the maintenance of A/C Systems, Plumbing, Electric,

Lighting and other general property/systems maintenance.




4.0 Key Team Member References

4.1 References

Name Position

Col. Richard Pember – US Army Retired Chief Executive Officer (CEO)

No. Name Company Industry Telephone Email Address

1 Bob Crumb Warrensburg, MO Public

Works Director Municipal Government 660-441-7510 [email protected]

2 Col. Jim Stephenson US Army Reserves

11th Aviation Command US Department of

Defense 770-826-8233 [email protected]

3 General Wayne Brock US Army Reserves

335th Signal Command US Department of







Richard’s Subject Matter Expertise & Past Performance: Engineering, Operations & Construction: Energy; Communications; Forward Operating Bases; Housing (MILCON) & MEP.

Jeff’s Subject Matter Expertise & Past Performance: Safety & Security: Military; Law Enforcement; Homeland Security.

Bob’s Subject Matter Expertise & Past Performance: Operations & Construction: Hospitals; Airports; Infrastructure; Universities; Bio-Labs; High-Tech; Classified Base Development/MILCON/Housing; Water/Wastewater; Power; Communications.

Name Position

Jeff Anderson – USAF Retired President


1 Joe Escribano Travis County Sheriff’s

Office Law Enforcement 512-799-4594 [email protected]

2 Scott Johnson USAF US Department of


3 Rose Castro Real Estate Broker Texas Real Estate 512-656-3281 [email protected]

Name Position

Bobby Anderson, PMP, MSA Chief Operations Officer (COO)


1 Terry Lukan PAE Government Services EPC Management 202-286-0732 [email protected]

2 Gary Belson Gary Belson & Associates Special Security

Operations 904-491-8358 [email protected]

3 Laurie Goossens US Department of State Diplomatic Services 813-777-0101 [email protected]

Name Position

Michele McDaniel – Subject Matter Expert Chief Financial Officer (CFO)


1 Mike Simone DoD US Department of


2 Kin LaFate Raytheon US Department of












Michele’s Subject Matter Expertise & Past Performance: Finance & Contracts Management: Communications; Civil; Commercial; Industrial; Institutional & Military Design-Build.

Michael’s Subject Matter Expertise & Past Performance: Information Technology Management: US Department of Defense; Finance; Aerospace.

Karolina’s Subject Matter Expertise & Past Performance: Operations & Logistics: US Department of Defense; US Department of State.

3 JJ Fair Retired Energy 619-606-1318 [email protected]

Name Position

Michael Clark – Subject Matter Expert Chief Information Officer (CIO)


1 Michael Sheehan Market Communications PR 646-258-0133 [email protected]

2 Chris Corridon IP Trade Investments 917-968-8694 [email protected]

3 Tracey Carter Tri Care Insurance 512-922-7642 [email protected]

Name Position

Karolina Stanley – Subject Matter Expert Operations Manager


1 Col Christopher Lackovik US Secretary of the Army

USARMY War College US Department of


2 LTC James Bryant, Jr. DISA Command Center

Operations US Department of


3 Barry Wheeler Engineering Solutions &

Products, LLC. EPC Management 254-535-4784 [email protected]

Name Position

Carter Einhorn – Subject Matter Expert Director of IT Recruitment


1 Jeff MacPherson City of Edmonton Municipal Government 780-496-7800 [email protected]

2 Bob Mabry Hitachi Consulting IT Recruiting 469-955-0559 [email protected]












Carter’s Subject Matter Expertise & Past Performance: Recruitment & IT Management: IT Contract Staffing; Permanent Placement; Oil and Gas; Construction; Engineering; Energy; Federal/State & Local Government.

Armand’s Subject Matter Expertise & Past Performance: Recruitment & EPC Management:• EPC Contract Staffing; Permanent Placement; Commercial & Institutional Construction Management; Civil Construction Management; Energy Construction & Process Management; Engineering & Design Management; Management, Scientific & Technical Consulting Services; Facilities Management.

3 Ken Helstowski Legato Consulting Services Storage Network

Professional Services 508-769-9943 [email protected]

Name Position

Armand Daniels – Subject Matter Expert Director of EPC Recruitment


1 David Baley Capitol Systems Inc. US Government

Contractor 512-894-0725 [email protected]

2 Kenneth Hayden Crossroads Systems Data Storage Solutions 512-349-0300 [email protected]

3 Joe Brummer MicroMain Facilities &

Maintenance Management Software

888-888-1600 [email protected]





Date post:	21-Jul-2016
Category:	Documents
Upload:	federal-buyers-guide-inc
View:	258 times
Download:	22 times

Prime - April 2015

Documents