4
Specification Modem PRIME 1 | Copyright © 2012, Fideltronik PRIME PLC modem • Used for data transmission in low voltage mains networks; • Intended to use by electric utility providers; • Certified for compliance with EN50065 EMC requirements and PRIME specifications; • Based on ST Microelectronics integrated circuits. STMicroelectronics is member of the PRIME Alliance. Techical specification: Model Modem PRIME Supply Supply voltage 85~265VAC 50/60Hz Power consumption 1.2 W / 230VAC Maximum supply current – PRIME data transmission <2,5A max. (230VAC) Communication ports Communication port - PRIME Data lines internally shorted with supply lines L and N Communication port - RS232 Tx out and Rx in signals – full duplex, modem lines RTS and CTS Communication port - RS485 (option) A & B signals (optional transmission lines), not connected as a standard Signaling POWER Power on RS ACTIVE RS232 connection active PRIME ACTIVE PRIME connection active PRIME 1 Status (GPIO5 pin) - configurable by firmware PRIME 2 Status (GPIO3 pin) - configurable by firmware Environmental conditions Operating temperature and humidity -0°C~ + 40°C, 20% ~ 90%RH Storage temperature and humidity -20°C~ + 85°C,10% ~ 95%RH Mechanical specification Dimensions 157mm x 87mm x 60mm Weight 0.23 kg Safety and EMC standards Safety EN60950-1 Class I Electromagnetic compatibility EN50065-1, EN50065-7 EN61000-4-2, EN61000-4-3, EN61000-4-4, EN61000-4-5, EN61000-4-6, EN61000-4-8, EN61000-4-11, EN 50065-2-3 Certificates CE, PRIME, RoHS
