+ All Categories
Home > Documents > Primo 73 Primo 75 Primo 81 Primo 91 Primo 93 - MSI USA · Primo 73, 75, 81, 91 & 93 – Firmware...

Primo 73 Primo 75 Primo 81 Primo 91 Primo 93 - MSI USA · Primo 73, 75, 81, 91 & 93 – Firmware...

Date post: 27-Nov-2018
Category:
Upload: lamkhue
View: 268 times
Download: 6 times
Share this document with a friend
10
0 Primo 73 Primo 75 Primo 81 Primo 91 Primo 93 Firmware Recovery Guide Prepared by MSI NB FAE Team | Version: 2.1 | Date: 2013/12/23
Transcript

0

Primo 73

Primo 75

Primo 81

Primo 91

Primo 93 Firmware Recovery Guide

Prepared by MSI NB FAE Team | Version: 2.1 | Date: 2013/12/23

Primo 73, 75, 81, 91 & 93 – Firmware Recovery Guide | 1

I. Source package download and tool installation (MSI recommends Windows 7 for

firmware tool installation)

1. Download firmware package from MSI Primo 73, Primo 75, Primo 81, Primo 91

and Primo 93 page.

Primo 73:http://www.msi.com/product/windpad/Primo-73.html

Primo 75:http://www.msi.com/product/windpad/Primo-75.html

Primo 81:http://www.msi.com/product/windpad/Primo-81.html

Primo 91:http://www.msi.com/product/windpad/Primo-91.html

Primo 93 : http://www.msi.com/product/windpad/Primo-93.html

CAUTION: Update firmware will wipe all data on tablet. MSI strongly recommends that user

should prepare a backup before proceeding with firmware upgrade.

2. Extract file PhoenixSuit1.0.6.zip and find PhoenixSuit_EN.

Primo 73, 75, 81, 91 & 93 – Firmware Recovery Guide | 2

3. Execute PhoenixSuit_EN and press ”Next” button.

4. Select installation folder and press “Next”.

Primo 73, 75, 81, 91 & 93 – Firmware Recovery Guide | 3

5. Confirm installation and click the “Next”

6. Use ”Device Driver Installation Wizard” and click ”Next” to continute.

Primo 73, 75, 81, 91 & 93 – Firmware Recovery Guide | 4

7. Press “Install the driver software anyway” in Windows Security.

8. Click ”Finish” to end the installation.

Primo 73, 75, 81, 91 & 93 – Firmware Recovery Guide | 5

9. Click “Close” to exit the installer.

Primo 73, 75, 81, 91 & 93 – Firmware Recovery Guide | 6

II. Firmware Recovery

1. Execute ”PhoenixSuit” as below.

2. Move to “Firmware” tab and use “Image” button to select “XXXX.img”.

Primo 73:N71J.img

Primo 75 : N71H.img

Primo 81:N821.img

Primo 91:N913.img

Primo 93:N915.img

Primo 73, 75, 81, 91 & 93 – Firmware Recovery Guide | 7

3. Long press the power key at least 10 seconds to power off the device.

4. Release “power key” after the system shut down (For now, Do NOT connect to

PC)

5. Press “Volume +” and do NOT release it.

6. Keep pressing “Volume +” button and connect to PC through USB2.0.

7. Keep pressing “Volume +” button and push 5 times on “power” key. ( Please make

sure “Volume +” and “power” are pressed together when you push the fifth time on

“power” key)

8. Release all key which are pressed and the device should start the auto upgrade

process. (If the upgrading didn’t start, please repeate the steps 3~7)

Primo 73, 75, 81, 91 & 93 – Firmware Recovery Guide | 8

9. Does mandatory format? Please select ”Yes”.

10. Are you sure to force format? Please select “Yes”.

Primo 73, 75, 81, 91 & 93 – Firmware Recovery Guide | 9

11. Firmware update is starting.

12. Upgrade firmware succeed. Click the “OK” to end process.

Disconnect the PC and tablet first. And we can restart our system.


Recommended