Prince Premium SWR Systems

8/19/2019 Prince Premium SWR Systems

1/19

Prince Premium SWR Systems For all practical purposes, the best you can buy.

Prince Premium SWR Systems include a wide range of pipes and fittings which have an equallywide range of applications. Tougher and economical, PRINCE uPVC SWR pipes and rainageSystems as well as for Vent !ines when compared to Cast iron and "s#estos Cement rainageSystems. What$s more,Prince Premium SWR Systems are approved #y CPW , %&S, '%C,C( C), %*" ".

This product is certified with "Certificate of Conformity" from +enya 'ureau of Standard.

Applications

or SWR rainage Systems at homes, offices, hotels,industries, hospitals as well as pu#lic places such asairports, railway stations, #us-stands, etc

or overflow lines and chemical waste lines atindustries, dairy plants, food processing plants, etc.

or vent lines in drainage systems and in mining pits.

A !anta es

Right from the inherent properties of uPVC to a virtual lifetime of trou#le-free performance,Prince Premium SWR Systems are far more superior to Cast (ron and "s#estos Cement drainage

systems.

Corrosion Resistant # uPVC material is unaffected #y most of the chemical and is rustproof.Fire Resistant # uPVC is self-e tinguishing and so special precautions are necessary duringinstallations.$on er $astin # !onger lasting due to its inertness to most chemical and superior mechanical

properties. "lso, it remains unharmed #y insects or rodents.Smooth # Smooth inside surface insures effective discharge and high flow rate.

$i ht Wei ht # &asy to transport and handle.Easy to install # &asy to install and less time consuming than C( or "C systems. Ru##er ringsealing ensures lea/proof 0oint.Stron # Strong with high impact strength, can withstand rough handling.Easy to maintain # Smooth inside #ore and threaded door caps provide ease of inspection andcleaning.%urable # 1o scale formations.Economical # &conomical in every way. "ll these advantages add up to a significant costreduction.


2/19

&echnicality # 'ac/ed up #y technical services, offered #y the company$s trained personal.

Si'e

"vaila#le in 23mm, 42mm, 53mm, 663mm ittings

&ype

S)C 7 S)C+&T 8 &%"!&9 fittingsSP( 7 SP(:)T 8%"!&9 fittings.

A!ailable in Color

!ight :ray, ar/ :ray, :olden 'rown, (vory and White.

&est

The toughest test comes at the performance stage. Prince Premium SWR pipes and fittings arespecially designed to withstand the e tremes from the free;ing cold temperatures of the !ada/hto the #la;ing heat of Ra0asthan. Continuous quality control is e ercised on all the products,which conform to the following standard<

Pipes IS # 6=25> SWR In(ection )oul e Fittin s Stan ar # (S6?4=2 < 6555

Fittin s %IN # 652=6 uP*C Pipe For Potable +ater supplies #(S ?5@2 <

>333

Rubber Rin s IS # 2=@> < 65@2 P*C Plumbin Pipe # "ST% 64@2

Pro uct Specifications

Sin le Soc-ete Pipe &ypeA/0

%ouble Soc-ete Pipe &ypeA/0 Plain Soc-ete Pipe


3/19

Pipe Connector +ith $ip Rin Pipe Connector 0ent &ype Coupler

Repair Coupler +ithoutCentral Re ister Sin le Push Fit Coupler Re ucer

0en 12.34 0en 12.34 +ith oor 0en 534


4/19

Cleansin Pipe Sin le &ee +ithout %oor Sin le &ee +ith %oor

%ouble &ee %ouble &ee +ith %oor Sin le 676

All imensions are in millimetres.

1 7 1ominal iameter.WT 7 Wall Thic/ness.P 7 Solvent Soc/eting.

7 a#ricated.

t 7 eet.% 7 %eter

Pro uct Specifications


5/19

Sin le 676 +ith %oor %ouble 676 %ouble 676 +ith %oor

*ent Co+l Pipe Clip Roun 8ali 9oles

Roun 8ali Strips S:uare 8ali 9oles S:uare 8ali Strips

Internal Re ucer $on Arm 0en +ith %oor %oor Cap


6/19

;ffset Soc-et Plu Rubber Rin

%oor


7/19

Nahani &rap +ithout Inlet Nahani &rap +ith Inlet Floor &rap

Floor &rap "2" P &rap +ith Air *ent =0i > P &rap +ith Ait *ent =Small>

P &rap +ithout Air *ent =0i > P &rap +ithout Air *ent=Small> P &rap ?@?@

P &rap ?@ 3 B &rap ?@?@ B &rap ?@ 3


8/19

S &rap ?@?@ S &rap ?@ 3 )ini &rap

0 ) &rap 0ell )outh Floor 0ell )outh &rap

All imensions are in millimetres.

1 7 1ominal iameter.WT 7 Wall Thic/ness.P 7 Solvent Soc/eting.

7 a#ricated.t 7 eet.

% 7 %eter

Chemical Chart Ri i P*C Chemical Resistance &able

The resistance of Rigid PVC to a wide range of chemicals is listed in the following ta#le. Thedata is indicative only and not to #e used as a gaurantee since the suitaility of Rigid PVC for a

particular chemical will also depend upon the actual wor/ing conditions, contaminations ofchemical, mechanical strsses etc.

C9E)ICA$ RI


9/19

"ceton B B

"lcohol 8?3A9 S B

"luminium louride S S

"luminium Sulphate S S

"mmonia :as 8 ry9 S S "mmonium Car#onate S S

"mmonium Car#onate S S

"mmonium 1itrate S S

"mmonium Phosphate 81eutral9 S S

"mmonium Sulphate S S

'arium Car#onate S S

'arium *ydro ide S S

'eer S S 'en;ene or 'en;ol B B

'rine S S

Calcium Chloride S S

Calcium Car#onate S S

Calcium *ypochlorite S S

Car#on Tetra-Chloride S B

Car#on io ide 8Wet ry9 S S

Castor )il S S

Chloric "cid 8>3A9 S S

Chlorine 8 ry-:as9 !iquid B B

Chromic "cid 8=3A9 S S

Cottonseed )il S S

Crude )il S B

etergents 81ormal ilution9 S S

iesel )il S S

&thers B B

&thylene Chloride B B &thylene :lycol S S

atty "cids S S

errous Chloride S S

lourine :as 8Wet9 S S

ormaldehyde 8?3A9 S S


10/19

ormic "cid 823A9 S B

ruit Duices, Pulp S S

:as 81atural %ethane9 S S

*ydrochloric "cid 8=3A9 S S

*ydrochlorous "cid S S *ydroflouric "cid 863A9 S B

*ydrogen Sulphide S S

+etones B B

+erosene S S

!inseed )il S S

%agnesium *ydro ide S S

%ercury S S

%ethane S S %ethyl Chloride B B

%il/ S S

%ineral )il S B

1aphtha S S

1itric "cid 863A9 S B

1itric "cid 8E@A9 B B

)ils F ats S S

) ygen S S

Phosphoric "cid 823A9 S S

Photographic Solution S S

Plating Solutions S S

Potassium Chloride S S

Potassium-*ydro ide S S

Propane S S

Sewage Residential S S

Soaps S S

Sodium Car#onate S S Sodium Chloride S S

Sodium *ydro ide 823A9 S S

Sodium 1itrate S S

Spirits 8Whis/y etc.9 S S

Sulphur io ide 8 ry9 S S


11/19

Sulphur io ide 8Wet9 S B

Sulphuric "cid upto 843A9 S S

Sulphuric "cid 842A- 53A9 S B

Trichloroehtylene B B

Tri-Sodium Phosphate S S Brea S S

Vinegar S S

Water Salt- resn S S

Ginc 1itrate S S

Ginc Sulphate S S

Comparision Chart Ri i P*C Chemical Resistance &able

The resistance of Rigid PVC to a wide range of chemicals is listed in the following ta#le. Thedata is indicative only and not to #e used as a gaurantee since the suitaility of Rigid PVC for a

particular chemical will also depend upon the actual wor/ing conditions, contaminations ofchemical, mechanical strsses etc.

PRINCEPRE)I ) SWR

S7S&E)SCAS& IR;N

S7S&E)S

AS0ES&;SCE)EN&S7S&E)S

Strength - *ighimpact strength :ood :ood -----

ura#ility23 years, BVsta#ili;er resistdamage from the sun.

>3 years 1o guarantee

(nertness tochemicals Very good :et o idised :ood resistance

ungus growth 1egative Positive Positive

Scale formation 1egative Positive 1egative

Weight 8inde 9 Very light E times PVC ? times PVC

(nstallation Very quic/ Very slow Slow

Setting up !ess la#our %ore la#our %ore la#our


12/19

(nside #ore Very smooth 1ot as smooth 1ot as smooth

Smooth inside #ore:ood flow rate. 1o

particle accumulationat all.

iminished flowrate. Particleaccumulation ta/es

place .

iminished flow rate.Particle accumulationta/es place .

%aintenance&asy to clean andinspect due tothreaded door caps.

iminished due torough inside #ore -difficult to open door caps.

iminished due torough inside #ore -difficult to open doorcaps.

Dointing !ea/proof 1ot lea/edproof 1ot lea/edproof

Repair &asy to repair Freplace 1ot easy to repair !ess easy to repair

Cost "verage %ore than PVC !ess than PVC

Instruction Sli in Soc-et SWR Pipes

Prince Premium SWR Systems with sliding soc/et 0oint are manufactured in dar/ grey color in?3mm, 23mm, E=mm, 42mm, 53mm, 663mm, 6E3mm dia si;es, with overall standard length of= metres. These pipes conform to indian standards (S< 6=25> and are designed to withstandcontinuous internal hydraulic pressure of ?/gf cm so as to ensure life-long trou#le- freewor/ing.The pipes are provided with an integral ru##er ring type soc/et at one end while otherend is /ept plain, smooth and free from #urrs. Ru##er ring type soc/et ends provide easy push-fittype 0oining. Simultaneously, allowance for thermal e pansion can also #e provided duringinstallation.

Pipe clips

The special design of PR(1C& pipe clips /eep Prince Premium SWR Pipe F ittings away fromthe #uilding wall, ma/ing the #uilding and pipes and fittings, maintenance easy, without SWR

messing up the #uilding e teriors.

Rubber Seal Rin s For 8oints An Access %oors

%anufactured in accordance with (S< 2=@> for 23mm, 42mm, 53mm, 6E3mm si;es. These aremade out of natural ru##er with a shore H"$ hardness of 23 I 2 provide superior resistance to

#iological attac/. Special design of cross section ensure perfect sealing.


13/19

$ubricant

"vaila#le in 633gms and 233 gms pac/ing. Specially formulated for compata#ility with ru##er seal as well as PVC. oes not support the growth

of #acteria or fungi.

Installation )etho s

Abo!e


14/19

with a new piece of pipe using two repair couplers.

Stora e

To avoid any possi#ility of damage to uPVC Pipes and fittings, a few points should #e /ept inmind.

J Pipes and fitting should not #e /ept on sharp o#0ects.

J !ift, do not drag pipes and fitting.

J ittings should #e stored in cartons or #ags.

J Pipes should stac/ed on an even surface, the stac/ing height not e eeding6.2 meters if they have to #e stored for a long period.

J Ru##er ring should #e /ept tension free.

J !u#ricants and solvent cement should #e stored in a cool place, away from direct sunlight.

8ointin Proce ure For Rubber Rin Soc-et

Step ?#

Cut the pvc with a fine toothed saw to the required length. Pipeshould #e cut square.

Step #

Chamfer the edge of the pipe to #e inserted at an angle of a#out 62Kto a#out 6 =rd the wall thic/ness, using a coarse file.

Step D#


15/19

%a/e sure the spigot and soc/et are thoroughly clean and dry.

Step 5#

(nsert the pipe into the soc/et without the seal ring and mar/ alongthe pipe, when it is fully inserted.

Step 3#

i the ru##er ring into the groove without twisting it.

Step #

"pply PR(1C& 0ointing lu#ricant to the chamfered end of the pipe,up to the mar/ made on spigot or to the soc/et end of fitting.

Step 2 #

Push the pipe firmly into the soc/et till the gap #etween the mar/ onthe spigot and soc/et is a#out 63mm to allow for thermal e pansion.

Note # &very care has #een ta/en to see that the information given in this page is correct andcurrent #ut is not intended to form any part of any contract. 1o warranty is intended to #egiven or implied in respect of the contents thereof.

8ointin )etho for P*C Nahani &rap P*C Pipe/Fittin s

Step ?#

"pply lu#ricant on the ru##er ring already in the grove of thefitting and also on the outlet of the nahani traps chamfered end.


16/19

Step #

Push-fit the nahani trap straight into the pipe fitting.

European WC 6P6 &rap P*C Strai ht WC Connector

Step ?#

%a/e sure the spigot and soc/et are thoroughly clean and dry.

Step #

&uropean WC with $P$ trap

Step D#

Place lip-ring on the soc/et end of the WC Connector and thenapply ru##er lu#ricant over the inside portion of the lip-ring.

Step 5#

Push-fit the WC Connector over the outlet of the &WC $p$ trap.

European 6S6 &rap P*C 0en WC Connector

Step ?#

&uropean WC with $s$ Trap.


17/19

Step #

'end WC Connector with lip-ring and ru##er lu#ricant.

Step D#

Place ru##er ring over the soc/et of the 'end WC Connectorand apply ru##er lu#ricant over the inside portion of the lip-ring.

Step 5#

Push-fit the 'end WC Connector over the outlet of the &WC $s$trap.

Note

&very care has #een ta/en to see that the information given in this page is correct and

current #ut is not intended to form any part of any contract. 1o warranty is intended to #egiven or implied in respect of the contents thereof.

8ointin P*C to C.I. an A.C.

Step ?#

Roughen the outside surface of the pipe fitting end to the e tentof the > inches on the circumference with coarse emery paper8sand paper9.


18/19

Step #

"pply thin coat of solvent cement on roughened surface with #rush.

Step D#

Sprin/le medium si;e dry sand on the solvent cement coat andleave it to dry for few minutes. " rough #ase is ready for good

#onding with cement.

Step 5#

(nsert the solvent cement #ase PVC pipe in to the soc/et ofC.(. ".C F fill the gap with ordinary portland cement.

8ointin CI P*C

Step ?#

or 0ointing C( into PVC ma/e rough solvent #ase on the insidesoc/et portion of pipe fitting of PVC as shown in a#ove figure.(nsert C( pipe in PVC pipe fitting soc/et and fill the gap withordinary portland cement.

Fi in P*C Pipe Clips on P*C Pipes

Step ?#

Pipe clip should always #e fi ed 0ust #elow the soc/et portionand not on the soc/et.


19/19

Step #

or 0ointing 63ft. pipe vertically one pipe clip to #e fi ed 0ust #elow the soc/et and otherclip at the centre of the pipe. i.e. at 2ft distance as shown in the diagram.

Step D#

or hori;ontal fi ing of PVC pipes, pipes clip, should #e fi edat =ft. internal as shown in the diagram.

1ote

&very care has #een ta/en to see that the information given inthis page is correct and current #ut is not intended to form any

part of any contract.

1o warranty is intended to #e given or implied in respect of thecontents thereof.

Date post:	07-Aug-2018
Category:	Documents
Upload:	abdul-rauf
View:	219 times
Download:	0 times

Prince Premium SWR Systems

Documents