To Print!
1 Go to Print and adjust settings.
2 Under size options, make sure ‘fit’ is checked. You will want to print the poster
on 11x17 paper.
3 Make sure ‘Choose paper source by PDF page size’ is clicked to eliminate white
borders and have the Constitution fill out the whole paper whenever possible.
4 You are now ready to print! You will have a total of 6 pages for each poster.
To Assemble!
• Fold any remaining white edges behind the paper so that they are not showing.
(You can also tape the edges back if you like.)
• Then take pages 1 and 2 and tape them so they are attached vertically.
• Next, you will repeat the process for pages 3 and 4, and 5 and 6.
• Once you have the cross sections finished, assemble the three sections horizontally.
• Repeat this process for the second page of the poster!
Constitution Poster PRINT INSTRUCTIONS