PRISM II: THE PRISM II was originally developed for this kind of adaptability in screen printing processesand later evolved into the PRISM II rotary machine. This heavy duty design, armed with an overabundance of features, enables a wide variety of custom and specialized functionality. In primary application of textile printing durability and strength of the PRISM II is extreme. Because we consider THE PRISM II SERIES to be a commercial tool, we consider the concept of the word option a little differently. We are not offering pneumatic clamps, digital off-contact and advanced software as options -these features are provided as standard features. In the standard version of the PRISM II we offer one of the longest print strokes in rotary screen printing machines - 110 cm. Not only do we offer the fully equipped standard version of the PRISM II we are ready to customize the machine according to our customers' needs.The PRISM II also comes with front-rear advanced screen clamping system as a standard feature, with mechanical isolation of the flash it enables of use Constant print area rule - which allows the printer to pass along characteristics of print length to width and vice versa. In addition to the generous standard image area on every head, the operator can enlarge image areas by reducing THE PRISM II screen printing rotary machine with MULTITASK SYSTEM enables the screen printing of different substrate and surfaces for use with specialty products.
SALES, SERVICE AND PARTS SUPPLIED BY the O.T.S. company [email protected] / 909-772-7645 / 951-696-5072
8-20 COLORS
IMAGE AREA 20”x28”
SERVO PALLET ROTATION
SERVO PALLET LIFT / LOWER
AC ELECTRIC PRINT HEADS
STANDARD FEATURES
Rotation
• Precise servo driven rotation
• Parameterized for different pallet weights ensuring smooth rotation
• Bi-directional rotation – Clockwise and Counter-Clockwise
• Servo driven indexing in combination with multi-print f lashing saves a print position
Lifting • Precision servo drive with tension spring
• Precisely set the central off-contact enables reliable repeatability in each cycle
• Combined with SEQUENCING feature creates 3-D print possibility
Print head • Membrane panel with full control of all head functions and machine motion movements
• AC driven print stroke with frequency converter for speed and torque control
• Longest serial equipped print stroke – full stroke length dependent on machine size
• Inner and outer print stroke adjustment with fault proof carriage system – eliminates
possibility of head crash
• Constant print area rule - which allows the printer to pass along characteristics of print length
to width and vice versa
Advanced programming functions • Software is constantly upgraded according to printers suggestions (We gladly listen to your
comments, as they help us create a better screen printing tool and help us grow as a
manufacturer!)
Screen Locks • Pneumatic screen locks controlled directly from every print head
• Additional manual clamps for increased screen pressure
Registration • Division tolerance is extremely accurate because we understand that proper registration is
directly responsible for print quality
• Upper division has an acceptable range of +/-0,01 mm
• Printing point on pallets has maximum deviation of +/- 0,025 mm.
• The numbers above ensure maximum accuracy for textile screen printing and also enables
accuracy for other specialty materials and surface printing
• Front micro-alignment with 3 axis
• Rear micro-alignment with 1 axis
• Fast print alignment with f loor light pallet
Squeegee and f lood bar • Independent settings for squeegee and f lood bar
• Fast and simple squeegee and f lood bar angle adjustment
• Single touch fast squeegee and f lood bar locks
Warranty and service • 2 year warranty
• Service agreement with special conditions
SALES, SERVICE AND PARTS SUPPLIED BY the O.T.S. company
[email protected] / 909-772-7645 / 951-696-5072
SPECIFICATIONS:
7 CFM @110 PSI 7 CFM @ 110 PSI 7 CFM @ 110 PSI 8 CFM @ 110 PSI 9 CFM @ 110 PSI 11 CFM@ 110 PSI
1 PHASE 208 VAC 33 A 3 PHASE 208 VAC 20 A
1 PHASE 208 VAC 38 A 3 PHASE 208 VAC 22A
1 PHASE 208 VAC 43 A 3 PHASE 208 VAC 25 A
1 PHASE 208 VAC 48 A 3 PHASE 208 VAC 28 A
1 PHASE 208 VAC 52 A 3 PHASE 208 VAC 30 A
1 PHASE 208 VAC 57 A 3 PHASE 208 VAC 33 A
15.25’ 17.5’ 18.5’ 19.25’ 20’ 21’