PRL LED ROADWAY LIGHT WWW.JADEMAR.COM Miami, FL USA - [email protected]T: 305.640.0465 - F: 305.640.0468 Page 1 of 2 Informaon contained herein is subject to change without noce. Values are nominal. Revised 07/2020 Performance Summary Product Description The PRL LED Roadway Light distills the benefits of the latest in LED technology into a high performance, high efficacy, long-life luminaire. The outstanding photometric performance results in sites with excellent uniformity, greater pole spacing and lower power density. The PRL LED Series is the better alternative for traditional street and area lighting with quick payback and improved performance. Features • Tool-less entry, Designed with 0-10V dimming capabilities. Controls options available. • Die cast aluminum housing with two-bolt bracket mounts to • 1-1/4” to 2” (1-5/8” to 2-3/8” O.D.) diameter mast arm bracket available as an option. Leveling adjustment from ± 5°. • Requires ANSI 3-wire, ANSI 5-wire or ANSI 7-wire Photocontrol Receptacle option. • Photocontrol ( PE) requires 100-277, 347-480V or shorting cap option. • Small Four Point Mounting-Mounts to 1.25" (32mm) IP, 1.66"(42mm) O.D. horizontal tenon / Large Four Point Mounting-Mounts to 2" (51mm) IP, 2.375"(60mm) O.D. horizontal tenon - Available as a separate accessory • Minimum 4KV surge rating. When ordering the SPD option, a separate surge protection device is installed within the luminaire which meets a minimum Category C Low (per ANSI/IEEE C62.41.2). • Precision-molded proprietary acrylic lenses provide multiple photometric distributions tailored specically to building mounted applications. • Features an ultra-durable powder topcoat, providing excellent resistance to corrosion, ultraviolet degradation and abrasion. • Power Distribution Terminal Block Board can be used the wire of 2-14 AWG(2.0-22mm2) . Electrical System • Input Voltage: 100-277V or 347-480V, 50/60Hz • Power Factor : > 0.9 at full load • Total Harmonic Distortion: < 20% at full load • Integral 10kV surge suppression protection standard • Luminaire is qualied to operate at ambient temperatures of -40°C to+50°C. Regulatory & Voluntary Qualications • UL Listed - Suitable for wet locations. • Certied to ANSI C136.31-2001, 3G vibration standards. • 10kV surge suppression protection tested in accordance with IEEE/ • ANSI C62.41.2. • Meets FCC Part 15 standards for conducted and radiated emissions. • Luminaire and nish endurance tested to withstand 3,000 hours of elevated ambient salt fog conditions as dened in ASTM Standard B117. • Dark Sky Friendly, IDA Approved. • RoHS compliant. Consult factory for additional details. • DesignLights Consortium ®(DLC) qualied product. Not all versions of this product may be DLC qualied. Please check the DLC Qualied • Products List at www.designlights.org to conrm which versions are qualied. Input Power 25W / 40W / 65W / 70W / 80W / 100W Efcacy 128 Lms/W max CCT Options 3000K / 4000K/ 5000K / 5700K Construction Die Cast Aluminum Housing with Powder Topcoat Finish and Molded Acrylic Lens Input Voltage 100-277VAC/ 347-480VAC Optional Ingress Protection IP65 CRI >70 Compliance UL / DLC Premium Surge Protection 10KV Standard Lifetime Based on TM21 L70 ≥100,000 Hrs / L80 ≥75,000 Hrs / L90 ≥50,000 Hrs Warranty 7 Year Limited 10.2” (260mm) 18.0" (458mm) 4.0” (102mm) Certications 7 Product Dimensions
Informa�on contained herein is subject to change without no�ce.
Values are nominal.
Revised 07/2020
Performance SummaryProduct DescriptionThe PRL LED Roadway Light distills the benefits of the latest in LED technology into a high performance, high efficacy, long-life luminaire. The outstanding photometric performance results in sites with excellent uniformity, greater pole spacing and lower power density.
The PRL LED Series is the better alternative for traditional street and area lighting with quick payback and improved performance.
Features• Tool-less entry, Designed with 0-10V dimming capabilities. Controls options
available.• Die cast aluminum housing with two-bolt bracket mounts to• 1-1/4” to 2” (1-5/8” to 2-3/8” O.D.) diameter mast arm bracket available as
an option. Leveling adjustment from ± 5°.• Requires ANSI 3-wire, ANSI 5-wire or ANSI 7-wire Photocontrol Receptacle
option.• Photocontrol ( PE) requires 100-277, 347-480V or shorting cap option.• Small Four Point Mounting-Mounts to 1.25" (32mm) IP, 1.66"(42mm) O.D.
horizontal tenon / Large Four Point Mounting-Mounts to 2" (51mm) IP, 2.375"(60mm) O.D. horizontal tenon - Available as a separate accessory
• Minimum 4KV surge rating. When ordering the SPD option, a separate surge protection device is installed within the luminaire which meets a minimum Category C Low (per ANSI/IEEE C62.41.2).
• Precision-molded proprietary acrylic lenses provide multiple photometric distributions tailored specically to building mounted applications.
• Features an ultra-durable powder topcoat, providing excellent resistance to corrosion, ultraviolet degradation and abrasion.
• Power Distribution Terminal Block Board can be used the wire of 2-14 AWG(2.0-22mm2) .
Electrical System• Input Voltage: 100-277V or 347-480V, 50/60Hz• Power Factor : > 0.9 at full load• Total Harmonic Distortion: < 20% at full load• Integral 10kV surge suppression protection standard• Luminaire is qualied to operate at ambient temperatures of -40°C to+50°C.
Regulatory & Voluntary Qualications• UL Listed - Suitable for wet locations.• Certied to ANSI C136.31-2001, 3G vibration standards.• 10kV surge suppression protection tested in accordance with IEEE/• ANSI C62.41.2.• Meets FCC Part 15 standards for conducted and radiated emissions.• Luminaire and nish endurance tested to withstand 3,000 hours of elevated
ambient salt fog conditions as dened in ASTM Standard B117.• Dark Sky Friendly, IDA Approved.• RoHS compliant. Consult factory for additional details.• DesignLights Consortium ®(DLC) qualied product. Not all versions of this
product may be DLC qualied. Please check the DLC Qualied• Products List at www.designlights.org to conrm which versions are qualied.
Input Power 25W / 40W / 65W / 70W / 80W / 100W
Efcacy 128 Lms/W max
CCT Options 3000K / 4000K/ 5000K / 5700K
ConstructionDie Cast Aluminum Housing with Powder Topcoat Finish and Molded Acrylic Lens
Input Voltage 100-277VAC/ 347-480VAC Optional
Ingress Protection IP65
CRI >70
Compliance UL / DLC Premium
Surge Protection 10KV Standard
Lifetime Based on TM21 L70 ≥100,000 Hrs / L80 ≥75,000 Hrs /L90 ≥50,000 Hrs
