Pro-Lite Distributor Catalogue 2012

2013

1

Born of a racing heritage spanning more than 30 years and covering most of the globe, Pro-Lite brings the vision of professional racers to a

production team raised on hand-built quality. The experience that comes from building thousands of wheels, frames and other parts for decades as a manufacturer goes into every product we make, from budget friendly entry level models, right on up to the top of the line wind-slicing, world class race products used by professional athletes all over the world.

We know what you want.We make what you need.

2

Modena ...................................................Time Trial / Triathlon ...............................................................3Espresso Aerobuster ....................... Time Trial / Triathlon ...............................................................4Menaggio ............................................... Track ....................................................................................5Trentino Aerobuster ........................ Track ....................................................................................6Galileo ..................................................... Road .....................................................................................7Bella Pro GP ......................................... Road .................................................................................... 9Bella Plus GP........................................ Road .................................................................................. 11Bella Plus ............................................... Road .................................................................................. 12Bella GP .................................................. Road .................................................................................. 13Bella .......................................................... Road .................................................................................. 14Cuneo GP ............................................... Road .................................................................................. 15Cuneo ....................................................... Road .................................................................................. 16Cuneo 650 ............................................. Road .................................................................................. 17Carrara Sportif .................................... Road / Sportif ..................................................................... 18Piemonte II .......................................... Cyclecross .......................................................................... 19Aosta ........................................................ Cross Country ..................................................................... 20

Rome ............................................... TT / Track .........................Carbon 5 spokes .................................. 23Padova II ....................................... TT / Track .........................Carbon Disc .......................................... 25Vicenza ........................................... Road / Track 2 in 1 ............Carbon Tubular ..................................... 27Vicenza ........................................... Road / Track 2 in 1 ............Carbon / Alloy wall Clincher .................... 28Gavia ............................................... Road ................................Carbon Tubular ..................................... 29Gavia ............................................... Road ................................Carbon Clincher .................................... 30Gavia ............................................... Road ................................Carbon / Alloy wall Clincher .................... 31Gavia Volante ............................. Road ................................Alloy Clincher ........................................ 32Bracciano Carbon ..................... Road ................................Carbon Tubular ..................................... 33Bracciano Alloy .......................... Road ................................Alloy Clincher ........................................ 34Paula ................................................ Road ................................Alloy Clincher ........................................ 35Merano............................................ Road ................................Alloy Clincher ........................................ 36Verona ............................................ Road ................................Alloy Clincher ........................................ 39Garda .............................................. Road ................................Alloy Clincher ........................................ 39Como ............................................... Road ................................Alloy Clincher ........................................ 40Lucca ............................................... Cyclecross .........................Alloy Clincher ........................................ 40Rosa Carbon ................................ Track ...............................Carbon Tubular ..................................... 41Rosa Alloy ..................................... Track ...............................Alloy Clincher ........................................ 42Aneto XC ....................................... Cross Country....................Alloy Rim, Disc Brake ............................. 43Aragon AM .................................... All Mountain ......................Alloy Rim, Disc Brake ............................. 44Veleta .............................................. All Mountain ......................Alloy Rim, Disc Brake ............................. 45Teide ................................................MTB .................................Alloy Rim, Disc Brake ............................. 46

Frames

Wheelsets

Forks ..................................... 47

Headsets ............................. 49

Handlebars ......................... 50

Stem ..................................... 53

Saddles ................................ 56

Cranks .................................. 57

Wheelset Accessories ......59

Accessories .........................61

Handlebar Tapes ...............60

Sunglasses ..........................62

Clothing ................................63

3

Overcoming obstacles. It’s what you do every day. It’s what separates the wheat from the chaff, the men from the boys… the winners from the “also raced”.

It’s what we do at our in-house independent carbon fibre frame production factory, making the best of time in the wind tunnel, fine tuning the 3D moulding, using our own custom high vacuum forming machine incorporating the essence of speed into every square millimeter of bicycle.

And regardless of what your obstacles are, the other racers, the struggle inside your head or the relentless march of a stopwatch, after the starting tones count down, the pedal will turn and you will launch. You will overcome.

Modena - No obstacle will stand in your way.

Modena Full Carbon Monocoque Time Trial Frame

Size Small Medium Large

Frame Size (C-C+50mm) 502.7 507.6 517.5

Seat Tube - Center to Top 720 765 800

Seat Tube - Center to Center 452.7 457.6 467.5

Head Tube Length 85 90 100

Top Tube Horizontal 525 557 589

Bottom Bracket Drop 65 65 65

Seat Tube Angle 75 75 75

Head Tube Angle 72 72 72

Wheel Base 953.48 985.7 1018.3

Chain Stay Length 385 385 385

Fork Rake 43 43 43

Seat Tube ISP - Seat Clamp Included

Headset 1-1/8" Integrated Headset (41.8 Campy style)

• Designedusing"LeadingEdgeDeflectionTechnology"• Ultra-stiff bottom bracket and head tube• Wind-tunnel developed frame design • Dualseatpositionsforversatilityandgeometrycompliance

allowing for both time trial and triathlon positions • Adjustable CNC machined dropouts for perfect chain

adjustment and perfect performance• Fullinternalcableroutingforimprovedaerodynamics• Designed for close wheel tolerances resulting in ideal

aerodynamicsandpowertransferproperties.

2 Tone Finish Microadjustable design for 21c-23c tyres

4


Frame Size (C-C+50mm) 502.7 507.6 517.5


Seat Tube - Center to Center 452.7 457.6 467.5


Top Tube Horizontal 525 557 589



Head Tube Angle 72 72 72

Wheel Base 953.48 985.7 1018.3


Fork Rake 43 43 43



Espresso Aerobuster7005AlloyTimeTrialFrame-WithAerobusterSystem

U ltra fast. It's what everyone likes to say, but when you ride the Espresso, you will believe it. The compact Espresso frame features a unique CNC machined seat tube that gives you as much of the

aerodynamic benefit and rigidity found in the Modena. The cutaway on the seat tube also allows the rear wheel to be positioned closer to the seat tube, thus maximizing the power transfer that is so critical when every millisecond counts.

Standard equipment includes the Aerobuster seatpost and clamp with an optional adaptor that allows instant conversion to accept a 27.2mm round seat post.

• Designed using L.E.D.T. - Leading Edge Deflection Technology

• CNC machined Alloy microadjustable dropouts for track-tight performance

• Internal cable routing for improved aerodynamics

100% hand built!

Size 49cm 51cm 53cm 55cm 57cm

Seat Tube - Center to Top 490 510 530 550 570

Seat Tube - Center to Center 435.5 455.5 473.6 493.6 497.3

Head Tube Length 100 110 125 132 134

Top Tube Horizontal 504.6 509.4 519.8 536.5 557

Bottom Bracket Drop 68 68 68 68 68

Seat Tube Angle 76 76 76 76 76

Head Tube Angle 72 72.5 72.5 72.5 73

Wheel Base 949.7 950.9 962.3 979.5 995.7

Chain Stay Length 393 393 393 393 393

Fork Rake 40 40 40 40 40

Seat Tube Aerobuster (Included)


Light on White Finish 2 Tone Finish

Microadjustable design for 21c-23c tyres

5



Seat Tube - Center to Center 463 457.6 467.5


Top Tube Horizontal 523.41 555 580



Head Tube Angle 72.5 72.5 72.5

Wheel Base 944.71 977.21 1003.33


Fork Rake 43 43 43



MenaggioFull Carbon Monocoque Track Frame

2012. The year of the explosion.

No, it’s not the end of the world, but the world of track racing sits poised to explode. Between the London Olympics, World Championships in Melbourne and even video games based on track cycling set to break new ground, 2012 looks to be one of the most exciting years for track cycling in history. Cycling enthusiasts everywhere, at every level are getting drawn into the world of slick velodromes, shiny spotlights and the thrill of dumping raw power through a machine built to do just one thing: turn torque into speed.

2 Tone Finish



Seat Tube - Center to Center 445 475 485 505 525

Head Tube Length 130 140 150 165 186

Top Tube Horizontal 537.64 543.16 562.97 574.09 583.54



Head Tube Angle 74 74 74 74 74

Wheel Base 942.64 942.64 959.7 969.44 979.17


Fork Rake 40 40 40 40 40



• Designedusing"LeadingEdgeDeflectionTechnology"• Ultra-stiff bottom bracket and head tube• Wind-tunnel developed frame design • Dualseatpositionsforversatilityandgeometrycompliance

allowing for both sprint and pursuit positions • Adjustable dropouts for perfect chain adjustment• Designed for close wheel tolerances resulting in ideal

aerodynamicsandpowerproperties

Designed for track racing

6

Perfect for all track usage: sprint, madison, pursuit... The Trentino delivers amazing response to acceleration, being designed to turn raw power into maximum speed. Sharing the same CNC shaped

seat tube as its cousin the Espresso, the Trentino retains the same drive efficiency, stability and stiffness that you can't do without.

Standard equipment includes the Aerobuster seatpost and clamp with an optional adaptor that allows instant conversion to accept a 27.2mm round seat post.

Designed using L.E.D.T. - Leading Edge Deflection Technology.CNC machined stainless steel microadjustable dropouts.

100% hand built using Pro-Lite tubing.

Trentino Aerobuster7005AlloyTrackFrame-WithAerobusterSystem

Light on White Finish 2 Tone Finish




Head Tube Length 130 140 150 165 186





Wheel Base 942.64 942.64 959.7 969.44 979.17


Fork Rake 40 40 40 40 40



Designed for track racingCro-Mo for high torque




Head Tube Length 98 122 138 157 177

Top Tube Horizontal 525 537.5 550 560 575


Seat Tube Angle 74 73.5 73.5 73 73


Wheel Base 955.6 969 981.7 990 1005


Fork Rake 45 45 45 45 45

Seat Tube 27.2 mm


Black Finish

Full Carbon Road FrameGalileo

2 Tone Finish

7

Everything you could want in a road frame. Perfect for getting you onto the podium. There is no other carbon frame on the market than can offer such amazing power transfer properties.

Torque channeling stiffness. Dependable strength. Race bred geometry. Vibration soaking carbon fibre. All-day comfort. No lugs. No Compromise.

Pure efficiency.

100% hand made!

The first carbon frame in the world to pass EN vertical and horizontal testing using the same frame.

8

9

Bella Pro GPIt’s no secret that Pro-Lite has a deep interest in speed on two wheels. It may surprise some that we have been receiving direct feedback from MotoGP riders for many years now, but with the dedication to speed and the demand for precision production, it’s a natural synergy. Whether taming a nimble Moto GP beast or something a little less powerful, the instincts gained from working in the world of motorcycle racing can have direct application to getting the most out of an ultra-light road frame.

Take the aerodynamics and strength of a monocoque time trial frame like the Modena, the feather lightness of our Cuneo road frame and add the newly re-designed vibration defeating carbon stays of the Bella series and what do you get?

• Superb climbing properties• Aero advantages from the specific tube designs• Stiffness to enhance power transfer• Amazing comfort for long distance rides

Light on White Finish

7046AlloyFramewithDualCarbonStaysandAerobuster40SeatPost

Liguria fork and Ancona Headset sold separately.

Top Tube Profile

Down Tube Profile

10

Size 48cm 50cm 52cm 54cm 56cm 58cm

Seat Tube - Center to Top 485 505 525 545 565 585

Seat Tube - Center to Center 445 465 485 505 525 545

Head Tube Length 90 102 120 140 160 178

Top Tube Horizontal 500 520 535 550 560 575

Bottom Bracket Drop 67 67 67 67 67 67

Seat Tube Angle 74 74 74 73.5 73.5 73

Head Tube Angle 72 72.5 73 73 73 73

Wheel Base 943.6 953.5 965 980.80 990.8 1002.8

Chain Stay Length 400 400 400 405 405 407

Fork Rake 45 45 45 45 45 45

Headset Tapered Integrated (Suggested: Ancona headset)

Fork Tapered Fork (Suggested: Liguria Fork)

Seat Post Aero Type (Aerobuster 40 Included )

SoftStay3DProfile

Includes Aerobuster 4 0 s e a t p o s t a n d clamp.

11

Bella Plus GPOur designs are inspired following hundreds of hours of discussions with riders and mechanics all over the world. Our new GP edition frames improve stiffness, power transfer and cornering.

The unique 7046 ultralight tubing helps to provide a really light frame with truly amazing handling properties. For any rider concerned with weight, you cannot ignore the range of frames we produce using 7046 tubing.

Built without compromise to give you nothing but the best that money can buy.




Head Tube Length 90 102 120 140 160 178



Seat Tube Angle 74 74 74 73.5 73.5 73

Head Tube Angle 72 72.5 73 73 73 73

Wheel Base 943.6 953.5 965 980.60 990.8 1003


Fork Rake 45 45 45 45 45 45

Headset Tapered Integrated (Suggested: Ancona headset)


Seat Post 31.6 mm




Head Tube Length 90 102 120 140 160 178



Seat Tube Angle 74 74 74 73.5 73.5 73

Head Tube Angle 72 72.5 73 73 73 73

Wheel Base 943.6 953.5 965 980.6 990.8 1002.8


Fork Rake 45 45 45 45 45 45

Seat Tube 31.6mm



7046AlloyFrame-withGPSoftStay3DProfilestays

2 Tone Finish

SoftStay3DProfile

To make the most of any of our GP series frames, pair it with the brand new Liguria

all-carbon fork and Ancona headset (sold separately).

Top Tube Profile

Down Tube Profile

12

Bella Plus




Head Tube Length 90 102 120 140 160 178



Seat Tube Angle 74 74 74 73.5 73.5 73

Head Tube Angle 72 72.5 73 73 73 73

Wheel Base 943.6 953.5 965 980.6 990.8 1002.8


Fork Rake 45 45 45 45 45 45

Seat Tube 31.6mm


Adding a beautifully hand-made set of carbon chain-stays, the Bella Plus is yet another step in the evolution of the Bella frame. Both sets of stays are built using high modulus carbon for those wanting full carbon fibre seat & chain stays. Like its sibling the Bella, the carbon is bonded using proven Pro-Lite technology to exclusive Pro-Lite 7046 PBS tubing.

100% Hand Built!


7046AlloyFramewithDualCarbonStays

2 Tone Finish

Top Tube Profile

Down Tube Profile

13

The Bella range has been developed for riders who want to be able to perform at the best of their ability and know that their hard work is producing the best results. Bella frames use a variety of methods to improve stiffness, power transfer and cornering. Both the Bella and Bella GP use the fantastic 7046 alloy tubing produced in house at Pro-Lite's factory. The ultimate in 7000 series tubing.




Head Tube Length 90 102 120 140 160 178



Seat Tube Angle 74 74 74 73.5 73.5 73

Head Tube Angle 72 72.5 73 73 73 73

Wheel Base 943.6 953.5 965 980.60 990.8 1002.8


Fork Rake 45 45 45 45 45 45

Headset Tapered Integrated (Suggested: Ancona)


Seat Post 31.6 mm

Bella GP


7046AlloyFramewithCarbonSeatStay

2 Tone Finish

SoftStay3DProfile

To make the most of any of our GP series frames, pair it with the brand new Liguria

all-carbon fork and Ancona headset (sold separately).

Top Tube Profile

Down Tube Profile

14

The Bella range is a true race series. The tubing took more than four years to develop. The perfect tube shapes allow the rider to benefit from the weight saving benefits 7046 offers over other 7000 series tubes. We can ensure that every watt of power supplied from the rider is transferred into forward motion.

100% hand-built using exclusive Pro-Lite 7046 PBS tubing.




Head Tube Length 90 102 120 140 160 178



Seat Tube Angle 74 74 74 73.5 73.5 73

Head Tube Angle 72 72.5 73 73 73 73

Wheel Base 943.6 953.5 965 980.6 990.8 1002.8


Fork Rake 45 45 45 45 45 45

Seat Tube 31.6mm


Bella7046AlloyFramewithCarbonSeatStay


2 Tone Finish

Top Tube Profile

Down Tube Profile

15

Cuneo GP7046-FullAlloyFrame

What more could you ask for? The beauty of the Cuneo GP shouts at you to ride it. The unique tube shapes deliver optimal power transfer. The strength of the tubes produced from 7046 tubing is simply amazing. We ran this though the CEN fatigue test three times for over a million cycles and still could not break it. You have it all: looks, performance and light weight.

The Cuneo GP - The perfect choice when speed is more than just a dream.




Head Tube Length 90 102 120 140 160 178



Seat Tube Angle 74 74 74 73.5 73.5 73

Head Tube Angle 72 72.5 73 73 73 73

Wheel Base 943.6 953.5 965 980.60 990.8 1002.8


Fork Rake 45 45 45 45 45 45

Headset Tapered Integrated (Suggested: Ancona Headset)


Seat Post 31.6 mm


2 Tone Finish

To make the most of any of our GP series frames, pair it with the brand new Liguria all-carbon fork and

Ancona headset (sold separately).

Top Tube Profile

Down Tube Profile

Seat Stay Profile

16

Cuneo 7046-FullAlloyFrame

PBS 7046 = POWER, BODY AND SOUL.

This specially developed tubing is the PRO-LITE answer to SCANDIUM tubing. A full alloy frame comes in at around 1048 grams without the heavy price tag of SCANDIUM.

PBS tubing was four years in development and PRO-LITE is the only frame producer in the world able to produce such high quality frames out of this amazing, economical material.

7046 is 16% stronger than 7005 and 12% lighter, providing a truly superb ride time and time again.




Head Tube Length 90 102 120 140 160 178



Seat Tube Angle 74 74 74 73.5 73.5 73

Head Tube Angle 72 72.5 73 73 73 73

Wheel Base 943.6 953.5 965 980.6 990.8 1002.8


Fork Rake 45 45 45 45 45 45

Seat Tube 31.6mm



2 Tone Finish

Top Tube Profile

Down Tube Profile

Seat Stay Profile

17

Size 650C

Seat Tube - Center to Top 440

Seat Tube - Center to Center 395

Head Tube Length 96

Top Tube Horizontal 509

Bottom Bracket Drop 48

Seat Tube Angle 73

Head Tube Angle 71.8

Wheel Base 915.25

Chain Stay Length 370

Fork Rake 43

Seat Tube 27.2mm


Cuneo 650 7046-FullAlloy650cFrame

Road Racing and 650c. It’s rare to see the two things together but, the truth is, no matter how tall or short you might be, there is no compromise for having a bicycle that fits. The costs of having a frame custom made can be frightening, and using the wrong frame for the job can impair comfort and performance. Responding to the needs of smaller riders everywhere, Pro-Lite has taken the lessons learned from our youth series and made a truly professional solution for the ‘naturally aerodynamic’.

Using the same PBS 7046 alloy as the standard Cuneo, the unbelievable lightness and rigid power transfer of the Cuneo 650 blends professional quality with racing vision. Full race geometry delivers true performance.

The Cuneo 650 is a perfect match for our new Bracciano 650 wheelset. Available in selected countries as a complete bike. Please also check www.pro-lite.net for The One series.


Top Tube Profile

Down Tube Profile

Seat Stay Profile

18

Carrara Sportif7046FullAlloySportifFrame

The surging popularity of Sportif and Gran Fondo has brought the excitement of racing to the masses, with the focus on cameraderie and the enjoyment of the ride softening the edge of competitivity. To match this, Pro-Lite has developed the Carrara frame. Using the latest race-inspired technologies like tapered headtubes, rare 7046 alloy and aerodynamic internal cable routing, this ultra-light frame is everything you could want, whether you are riding to win or just for the joy of the ride.

The Carrara is a classically modern road frame drawn from geometries that have proven themselves over time. The Carrara was not built for the sake of nostalgia. It is designed with geometry aimed at stable handling and comfort over the long ride. But this is no soft touch road frame either; it will power you over great distances for as long as you can keep pedaling. Sleek classic-inspired styling and custom tubing will make sure you have something to be proud of on every ride.



Seat Tube - Center to Center 388.68 439.79 470.95 501.37 531.02

Head Tube Length 115 121 145 175 200



Seat Tube Angle 74.48 74.03 73.52 73.07 72.69

Head Tube Angle 72 72.5 73 73 73.3

Wheel Base 960.73 967.81 981.02 999.15 1012.25


Fork Rake 45 45 45 45 45

Headset Tapered Integrated (Suggested: Ancona Headset)


Seat Post 31.6 mm


2 Tone Finish

To make the most of the Carrara, pair it with the brand new Liguria all-carbon fork and Ancona

headset (sold separately).

19

Piemonte II7046AlloyCycloCrossFramewithCustomCarbonStays-DiscBrakeEnabled

Enjoying a new freedom brought about by the addition of disc brakes to cyclocross racing standards, the Piemonte embraces the future, inside and out. The reinforced internal structure complements the custom formed rear stays. Laughing away mud, these racer-designed stays welcome a wide range of tires, revel in rough terrain and adapt to the stresses of rim or hub based braking. The standard frame is available with cantilever brake bosses and of course, the option to equip disc brakes is now possible. Also new is the Enna II, our carbon cyclocross fork reworked with disc brake mounts.

For riders who don’t believe in limits.




Head Tube Length 105 125 145 160 175

Top Tube Horizontal 520 540 550 560 570


Seat Tube Angle 74.5 74 74 73.5 73

Head Tube Angle 71 71 71 72 72.5

Wheel Base 1010.3 1026.8 1037.9 1034.3 1034.6


Fork Rake 50 50 50 50 50

Seat Tube 31.6mm

Headset 1-1/8" Integrated headset (41.8 Campy style)

Disc brake capable


20

Aosta7046-FullAlloyMTBFrame

What does any cross country rider want? Speed, stiffness and handling.

With the superior stiffness and strength of 7046 PBS alloy, the Aosta can be built incredibly light. High zinc content 7000 series alloys are known as having the strongest potential and we have taken advantage of that to create a frame that astounds with its low weight & fantastic handling.

If you want a light frame for a light XC bike that just feels right, your choice just got a lot easier.

Size C to T 16.5" 18.5" 19.5"

Seat Tube - Center to Top 419-16.5" 470-18.5" 495-19.5"

Seat Tube - Center to Center 379 430 455


Top Tube Horizontal 568.5 590.5 594.6


Seat Tube Angle 73.1 73.1 73.1

Head Tube Angle 70.9 70.9 70.9

Wheel Base 1062.7 1064.7 1070.7


Fork Rake 39 39 39

Seat Tube 31.6mm

Headset 1-1/8" Semi-integrated headset (H/T OD 50mm/ID 44)


Disc brake capable

21

Model Size

A B C D E F G H I

Headset Front Mech Seat Post Seat Tube

Length (Center to Top)

Head Tube Length

Effective Top Tube

Horizontal

Head Tube Angle

Seat Tube Angle

Chain Stay Length Fork Rake

Bottom Bracket Drop

Wheelbase

MODENA

S 720 85 525 72 75 385 43 65 953 Integrated

41.8 Braze-on

Integrated Clamp included

M 765 90 557 72 75 385 43 65 986

L 800 100 589 72 75 385 43 65 1018

ESPRESSO

49cm 490 100 504.6 72 76 393 40 68 950

Integrated 41.8

Braze-onAerobuster

55mm

51cm 510 110 509.4 72.5 76 393 40 68 951

53cm 530 125 519.8 72.5 76 393 40 68 962

55cm 550 132 536.5 72.5 76 393 40 68 980

57cm 570 134 557 73 76 393 40 68 996

MENAGGIO

S 720 85 523.41 72.5 75 380 43.01 65 945 Integrated

41.8 x


M 765 105 555 72.5 75 380 43.01 65 977

L 800 130 580 72.5 75 380 43.01 65 1003

TRENTINO

49cm 490 130 537.64 74 74 370 40 50 943

Integrated xAerobuster

55mm

52cm 520 140 543.16 74 74 370 40 50 943

54cm 540 150 562.97 74 74 370 40 50 960

56cm 560 165 574.09 74 74 370 40 50 979

58cm 580 186 583.54 74 74 370 40 50 969

GALILEO

50cm 500 98 525 73 74 402 45 65 956

Integrated 41.8

Braze-on 27.2

52cm 520 122 537.5 73 73.5 405 45 65 969

54cm 540 138 550 73 73.5 405 45 65 982

56cm 560 157 560 73 73 408 45 65 990

58cm 580 177 575 73 73 408 45 65 1005

BELLA PRO GP

48cm 485 90 500 72 74 400 45 67 944

Integrated 1-1/8” Upper 1.5” Bottom

Braze-onAerobuster

40mm

50cm 505 102 520 72.5 74 400 45 67 954

52cm 525 120 535 73 74 400 45 67 965

54cm 545 140 550 73 73.5 405 45 67 981

56cm 565 160 560 73 73.5 405 45 67 991

58cm 585 178 575 73 73 407 45 67 1003

BELLA PLUS GP BELLA GP CUNEO GP

48cm 485 90 500 72 74 400 45 67 944


Braze-on 31.6

50cm 505 102 520 72.5 74 400 45 67 954

52cm 525 120 535 73 74 400 45 67 965

54cm 545 140 550 73 73.5 405 45 67 981

56cm 565 160 560 73 73.5 405 45 67 991

58cm 585 178 575 73 73 407 45 67 1003

BELLA PLUS BELLA CUNEO

48cm 485 90 500 72 74 400 45 67 944

Integrated 41.8

Braze-on 31.6

50cm 505 102 520 72.5 74 400 45 67 954

52cm 525 120 535 73 74 400 45 67 965

54cm 545 140 550 73 73.5 405 45 67 981

56cm 565 160 560 73 73.5 405 45 67 991

58cm 585 178 575 73 73 407 45 67 1003

CUNEO 650C 44cm 440 96 509 71.8 73 370 43 48 915 Integrated

41.8Clamp-on

31.827.2

CARRARA

44cm 440 115 513.6 72 74.48 404 45 69 961


Braze-on 31.6

49cm 490 121 529.2 72.5 74.03 404 45 69 968

52cm 520 145 550.6 73 73.52 405 45 69 981

55cm 550 175 570.3 73 73.07 408 45 69 999

58cm 580 200 590.8 73.3 72.69 408 45 69 1012

PIEMONTE

54cm 540 105 520 71 74.5 430 50 60 1010

Integrated 41.8

Braze-on 31.6

56cm 560 125 540 71 74 430 50 60 1027

58cm 580 145 550 71 74 430 50 60 1038

60cm 600 160 560 72 73.5 430 50 60 1034

62cm 620 175 570 72.5 73 430 50 60 1035

AOSTA

16.5 Inch 419 123 568.8 70.9 73.1 424 39 34 1063 Internal OD 50mm

ID 44

Clamp-on 34.9

31.618.5 Inch 470 123 590.2 70.9 73.1 424 39 34 1065

19.5 Inch 495 130 594.6 70.9 73.1 424 39 34 1071

A Seat Tube Length (Center to Top)

B Head Tube Length

C Effective Top Tube Horizontal

D Head Tube Angle

E Seat Tube Angle

F:ChainStayLength

G: Fork Rake

H Bottom Bracket Drop

I Wheelbase

2222

Model Size

A B C D E F G H I

Headset Front Mech Seat Post Seat Tube

Length (Center to Top)

Head Tube Length

Effective Top Tube

Horizontal

Head Tube Angle

Seat Tube Angle

Chain Stay Length Fork Rake

Bottom Bracket Drop

Wheelbase

MODENA

S 720 85 525 72 75 385 43 65 953 Integrated

41.8 Braze-on


M 765 90 557 72 75 385 43 65 986

L 800 100 589 72 75 385 43 65 1018

ESPRESSO

49cm 490 100 504.6 72 76 393 40 68 950

Integrated 41.8

Braze-onAerobuster

55mm

51cm 510 110 509.4 72.5 76 393 40 68 951

53cm 530 125 519.8 72.5 76 393 40 68 962

55cm 550 132 536.5 72.5 76 393 40 68 980

57cm 570 134 557 73 76 393 40 68 996

MENAGGIO

S 720 85 523.41 72.5 75 380 43.01 65 945 Integrated

41.8 x


M 765 105 555 72.5 75 380 43.01 65 977

L 800 130 580 72.5 75 380 43.01 65 1003

TRENTINO

49cm 490 130 537.64 74 74 370 40 50 943

Integrated xAerobuster

55mm

52cm 520 140 543.16 74 74 370 40 50 943

54cm 540 150 562.97 74 74 370 40 50 960

56cm 560 165 574.09 74 74 370 40 50 979

58cm 580 186 583.54 74 74 370 40 50 969

GALILEO

50cm 500 98 525 73 74 402 45 65 956

Integrated 41.8

Braze-on 27.2

52cm 520 122 537.5 73 73.5 405 45 65 969

54cm 540 138 550 73 73.5 405 45 65 982

56cm 560 157 560 73 73 408 45 65 990

58cm 580 177 575 73 73 408 45 65 1005

BELLA PRO GP

48cm 485 90 500 72 74 400 45 67 944


Braze-onAerobuster

40mm

50cm 505 102 520 72.5 74 400 45 67 954

52cm 525 120 535 73 74 400 45 67 965

54cm 545 140 550 73 73.5 405 45 67 981

56cm 565 160 560 73 73.5 405 45 67 991

58cm 585 178 575 73 73 407 45 67 1003

BELLA PLUS GP BELLA GP CUNEO GP

48cm 485 90 500 72 74 400 45 67 944


Braze-on 31.6

50cm 505 102 520 72.5 74 400 45 67 954

52cm 525 120 535 73 74 400 45 67 965

54cm 545 140 550 73 73.5 405 45 67 981

56cm 565 160 560 73 73.5 405 45 67 991

58cm 585 178 575 73 73 407 45 67 1003

BELLA PLUS BELLA CUNEO

48cm 485 90 500 72 74 400 45 67 944

Integrated 41.8

Braze-on 31.6

50cm 505 102 520 72.5 74 400 45 67 954

52cm 525 120 535 73 74 400 45 67 965

54cm 545 140 550 73 73.5 405 45 67 981

56cm 565 160 560 73 73.5 405 45 67 991

58cm 585 178 575 73 73 407 45 67 1003

CUNEO 650C 44cm 440 96 509 71.8 73 370 43 48 915 Integrated

41.8Clamp-on

31.827.2

CARRARA

44cm 440 115 513.6 72 74.48 404 45 69 961


Braze-on 31.6

49cm 490 121 529.2 72.5 74.03 404 45 69 968

52cm 520 145 550.6 73 73.52 405 45 69 981

55cm 550 175 570.3 73 73.07 408 45 69 999

58cm 580 200 590.8 73.3 72.69 408 45 69 1012

PIEMONTE

54cm 540 105 520 71 74.5 430 50 60 1010

Integrated 41.8

Braze-on 31.6

56cm 560 125 540 71 74 430 50 60 1027

58cm 580 145 550 71 74 430 50 60 1038

60cm 600 160 560 72 73.5 430 50 60 1034

62cm 620 175 570 72.5 73 430 50 60 1035

AOSTA

16.5 Inch 419 123 568.8 70.9 73.1 424 39 34 1063 Internal OD 50mm

ID 44

Clamp-on 34.9

31.618.5 Inch 470 123 590.2 70.9 73.1 424 39 34 1065

19.5 Inch 495 130 594.6 70.9 73.1 424 39 34 1071

2323

Rome

The Rome 5-spoke carbon wheel is the ultimate in monocoque carbon wheels. Producing incredible rigidity and perfect responsivenes, the superb ride experienced on this wheel will truly enhance any

rider's performance.

By using the very latest 3D software and manufacturing techniques, we have ensured that the aerodynamics of this wheel cut through the air with minimum drag and maximum performance. There is no other carbon spoked wheel on the market with such finely designed aerodynamic function.

Cutting-edge high pressure forming techniques were developed specifically for this wheel which yield extremely high lateral rigidity. Maximized rigidity results in maximized power output without compromising weight or aerodynamics.

Virtually maintenance free and featuring exceptionally low rolling resistance angular contact bearings, riders can simply fit it and ride.

The high modulus carbon fibre is perfect for both track and road conditions and can even handle the extreme stresses of tandem cycling as well.

Rome Full Carbon Five-Spoke Tubular Wheel

Front

Rear: Road Type

Rear: Track Type

2424

Front

Rear: Road Type

Rear: Track Type

25

Padova II Disc Wheel - Tubular or Clincher

Padova II

The original Padova set the bar pretty high. The extraordinary power transfer properties and super smooth bearings have earned the Padova many podium placings around the world, even as a key choice for young rider Aaron Gate, named Rider of the Year in 2010 in the World Series of Cycling.

The Padova II takes things one step further, with improvements to the flange design that improve power transfer yet more, while lightening the overall mass.

For serious strength and serious speed at an astonishing price, the Padova II simply cannot be ignored.

The Padova disc wheel has a useful 2 in 1 hub that lets the rider to switch from road to track in less than one minute. The wheel is supplied with all the parts necessary for the conversion.

Video tutorial now available! Please visit www.pro-lite.net for more information.

Shimano Tubular

Campy Tubular

Shimano Clincher

Campy Clincher

Shimano Tubular

Campy Tubular

Shimano Clincher

Campy Clincher

26

27

Rim High modulus T700 Carbon. Tubular

Front Hub Vicenza 2 in 1 - 20H

Lacing Front: Radial

Spokes PRO-LITE 3.2mm stainless steel aero spokes

Nipples Integrated

QR & Track kit Track Axle and Road QR skewer supplied

Accessories Wheelbag. Spare Spoke set. Tools. Brake Pads

Profile Type Weight

90mm Front 950g

Rim High modulus T700 Carbon. Tubular

Rear Hub Vicenza 2 in 1 - 24H

Lacing Rear: 2 Cross


Nipples Integrated

QR & Track kit Track axle kit and Road QR skewer supplied

Accessories 16t & 15t (1/2 x 1-1/8") Sprocket / Lockring / Wheelbag. Spare Spoke set. Tools. Brake Pads

Weight Shimano: 1084g Campy: 1114g

Full Carbon Tubular Wheel

Front wheel with 90mm rim

Profile Type Weight

90mm Front 720g

Front thru-axle for Track

Front Quick Release

Vicenza Large Flange Hub

Front wheel with 50mm rim

Vicenza 2 in 1 Road/Track hub

Vicenza-F90-MT Vicenza-F50-MT

Vicenza-R90-MT Rear wheel with 90mm rim

Front wheel with 50mm or 90mm rim

28

Vicenza CarbonClincherwithAlloybrakingsurface

Rim High modulus T700 Carbon. Alloy wall Clincher

Rear Hub Vicenza 2 in 1 - 24H

Lacing Rear: 2 Cross


Nipples Integrated

QR & Track kit Track axle kit and Road QR skewer supplied

Accessories 16t &15t (1/2 x 1/8") Sprocket / Lockring / Wheelbag. Spare Spoke set. Tools. Brake Pads

Weight Shimano: 1342g Campy: 1370g

Rear wheel with 90mm rim

Profile Type Weight

50mm Front 1010g

Vicenza-F50-XH

Profile Type Weight

90mm Front 1160g

Vicenza-F90-XH

Rim High modulus T700 Carbon. Alloy Wall Clincher

Front Hub Vicenza 2 in 1 - 20H

Lacing Front: Radial


Nipples Integrated

QR & Track kit Track Axle and Road QR skewer supplied

Accessories Wheelbag. Spare Spoke set. Tools. Brake Pads

Front thru-axle for Track

Front Quick Release

Vicenza Large Flange Hub

Front wheel with 50mm or 90mm rim

2 in 1 Road/Track hub

Vicenza-R90-XH

Front wheel with 90mm rim Front wheel with 50mm rim

29

Gavia Full Carbon Tubular Wheelset 90mm and 50mm combinations

Rim High modulus T700 Carbon - Tubular

ETRTO 13-622

Front Hub Bolzano - 20H

Rear Hub Bolzano - 24H

Lacing Front: 2 Cross / Rear: 3 Cross


Nipples Integrated

Skewer Brunico Carbon / Titanium Rod

Accessories Wheelbags. Spare Spoke set. Tools. Brake Pads

Pro-Lite Patented Bolzano HubAmazing low rolling resistance.Wheel Technology at its finest!

From 2012, the Gavia comes standard with our patented spoke

braces for the rear wheel.

Profile F/R Weight F/R

90mm / 90 mm Shimano: 910g / 1070gCampy: 910g / 1100g





Gavia-P55-MT

Gavia-P59-MT Gavia-P99-MT

30

Gavia Full Carbon Wheelset 50mm Clincher

Rim High modulus T700 Carbon - Clincher

ETRTO 13-622

Front Hub Bolzano - 20H

Rear Hub Bolzano - 24H


Spokes PRO-LITE 3.2mm stainless steel aero spoke

Nipples Integrated



Weight F/RShimano: 828g / 1012gCampy: 828g / 1042g

Gavia-P55-MH-S (50mm+50mm)Unlike other manufacturers rims - which are saddled with impractically low "maximum tyre pressure" and rider weight limits, the Pro-Lite carbon clincher rim lets you run your tyres at full race pressure... and you dont need to be a mere slip of a rider to be able to use them.

The carbon fibre layup uses the highest grade carbon fibre from Japan. The design provides ultra high sidewall stiffness and maximum torsional stiffness. Link this to the amazing patented Bolzano hub and you have simply the best wheel on the market for power transfer. The Pro-Lite stainless steel spokes are made from Sandvik stainless steel and are up to 30% stronger than any other spoke on the market.

The patented Bolzano hub allows all the spokes to leave at a tangent, optimal for power transfer. Spinning on Japanese EZO angular contact bearings, you end up with the most amazing low rolling resistance wheels you can get your hands on.





31

Rim High modulus T700 Carbon . Alloy Wall Clincher

ETRTO 13-622

Front Hub Bolzano - 20 H

Rear Hub Bolzano - 24 H


Spokes PRO-LITE 3.2mm stainless aero spoke

Nipples Integrated



Weight F/R

Shimano: 1002g / 1354gCampy: 1002g / 1385g

Gavia-P55-XH

Gavia-P99-XH

Gavia

Gavia-P59-XH

Carbon/AlloyClincherWheelset90mm and 50mm combinations










32

Gavia VolanteSuperlightLowProfileFullAlloyWheelset

Gavia-P22V-AH (21mm+21mm)

Rim Alloy T10 - 21mm / Eyelets / Sleeved

ETRTO 15-622

Front Hub Bolzano - 20 H

Rear Hub Bolzano - 24 H


Spokes PRO-LITE 2.2 mm Double Butted stainless steel aero spokes

Nipples Brass 14G

Skewer Alloy Quick release

Weight F/R Shimano: 628g / 836gCampy: 628g / 866g





"The rigidity and stiffness is immediately apparent, especially over the Sram I had run previously... the wheels are excellent, just excellent. I'm a big guy (6' 3", 120kg) and when I really got on it, putting the power down, I'd swear you could feel the difference with the power transmission of the wheels… the wheels felt really fast. Maintaining speed was noticeably easier.” – Mark G.

"The Bolzano hub is absolutely amazing...second to none. My local bike shop spent ten minutes passing it around, spinning it, captivated by the smoothness of the bearings.” - Jamie C.

The Gavia Volante carries on our tradition with some of the lightest low profile rims flash welded for minimal weight and superb strength. The new spoke braces (patent pending) create a ‘virtual flange’ that resists flexing under load, carrying the advantages of tying and soldering without the hassle. The Gavia’s trademark power transfer just got upgraded.

You will feel the difference, no question about it.

33

The award winning Bracciano receives a facelift along with a couple of new siblings. Now accompanied by a 650c version and a stunningly light 50mm carbon variant, the Bracciano continues to deliver performance and value that you would never have imagined at this price. Both versions sport in-house made carbon rims with the Team Race edition rim pre-build weight at just 370 grams and the Special Edition superlight rim weighing in at a scant 320 grams!

Now you have the build quality of the race-bred Gavia, the amazingly low weight of our brand new custom carbon rim layup and the classic strength and power transfer properties that Pro-Lite is famous for all over the world… It’s time to turn the world of carbon wheels on its head.

Carbon Rim Tubular Wheelset - 50mm

Rim Full Carbon Monocoque Tubular

ETRTO 13-622

Front Hub 2 sealed bearings - 20H

Rear Hub 4 sealed bearings - 24H

Lacing Front: Radial / Rear: 2 Cross

Spokes PRO-LITE 2.2mm double butted stainless steel

aero spokes

Nipples Alloy T73

Skewer Alloy

Special Edition: 492g / 688gTeam Race Version: 545g / 740g

Bracciano Carbon

From 2012, the Barcciano comes standard with our patented spoke


Weight F/R

Superlight: 492g / 688g (Shimano) 492g / 718g (Campy)

Team Race: 545g / 740g (Shimano) 545g / 770g (Campy)

34

BraccianoFullAlloyClincherWheelset-27mm

Rim Alloy 6066 - Flash Welding

ETRTO 13-622




Spokes PRO-LITE 2.2mm double butted stainless steel aero spokes

Nipples Alloy T73

Skewer Alloy

Finish Type Weight F/R

Shot Peened / Black Shimano 618g / 864g

Shot Peened / Black Campy 618g / 894g

Finish Type Weight F/R

Polished Silver Shimano 618g / 864g

Polished Silver Campy 618g / 894g

650C Version available

From 2012, the Barcciano comes standard with our patented spoke


Having been scrutinized in direct comparison to more competitor wheels than probably any other Pro-Lite wheel, the Bracciano continues to outshine wheels even three times the price! Lighter, stiffer and better priced, again and again reviewers and magazines pit it against top end brand name offerings to discover that the Bracciano is the superior choice for almost any avenue of cycling.

35

Always wanted to try a super-low spoke count wheel, but unsure about strength? Worry no longer.

Extreme oversized nipples. Ultra-solid 7050 alloy 4.5mm spokes and a brand new hub design with smooth rolling Japanese EZO bearings. Straight pull front and tangent pull rear. CNC machined weight reduction in the robust 6069 alloy rim.

Finally, a light low-spoke-count wheelset that inspires confidence, delivers outstanding performance and won't break the bank.

PaulaFullAlloyCNCMachinedLightweightWheelset

Rim Alloy T10- 25mm - Flash Welded

ETRTO 15-622



Lacing Front: Radial Rear: NDS Radial / DS 2 Cross

Spokes PRO-LITE 4.5 alloy spokes

Nipples Oversized Alloy

Skewer Alloy

Weight F/R Shimano: 680 / Campy: 880

36

MeranoFullAlloyRacingWheelset

A superb wheel designed for a lifetime of use whether you are looking for a wheel for racing or training. The 30mm profile rims give maximum aerodynamic performance, yet supply the strength you need to pedal your way to victory.

Rim Alloy T10-30mm-Sleeved

ETRTO 13-622





Nipples Alloy T73

Skewer Alloy

Weight F/R

Shimano: 730g / 940g

Campy: 730g / 970g

37

Merano-SE

Rim Alloy T10-30mm-Sleeved

ETRTO 13-622




Spokes PRO-LITE 2.2mm Double Butted stainless steel aero spokes

Nipples Alloy T73

Skewer Alloy

Weight F/R

Weight: 1558g

front : 690g / rear 868g

An upgrade from the Merano, the Merano SE use’s double butted spokes which is the perfect choice for people who look for savings in weight without compromising power transfer properties. Front and Rear weight 1558g.

38

Merano CarbonMerano-P55-XH

Rim High modulus T700 Carbon . Alloy Wall Clincher

ETRTO 13-622`




Spokes PRO-LITE 2.2mm Double Butted stainless steel aero spokes

Nipples Alloy T73 Intergraded

Skewer Alloy

Weight F/R

Weight: 2002g

front : 906g / rear 1096g

Encompassing all the benefits of the Merano wheel this beauty comes with carbon rim and agin the unique Pro-Lite spoke braces. From 2012, the Merano carbon comes

standard with our patented spokebraces for the rear wheel.

39

One of the more unusual wheels in our lineup is the Verona. The asymmetrical hub is more than it might appear though, directly addressing the imbalance inherent in every dished wheel. While more dish can give better lateral strength that helps when hammering out of the saddle, increasing the offset also decreases the tension, making the wheel more susceptible to fatigue and eventual failure.Building a large flange on the non-drive side allows a higher tension to be used, compensating for the imbalance introduced by the need for space for a cassette.Asymmetrical – but balanced.

Rim Alloy -25mm -Sleeved

ETRTO 13-622

Front Hub 2 sealed bearings - Straight Pull

Rear Hub 2 sealed bearings, 2 loose ball bearing -Straight Pull

Lacing Front 20H - Radial

Lacing Rear 24H - 2 Cross Drive side / Radial Non Drive side

Spokes PRO-LITE 2.3mm stainless steel aero spokes straight pull

Nipples Alloy

Skewer Alloy

Weight F/R Shimano: 670g / 964g

Verona

Garda

FullAlloyRacingWheelsetwithAsymmetricalHub

FullAlloyRacingWheelset

Rim Alloy -30mm - Pinned

ETRTO 13-622

Front Hub 2 sealed bearings

Rear Hub 2 sealed bearings and 2 loose ball bearings



Nipples Brass

Skewer Alloy


• Only available for Shimano cassette

An upgrade from the Como, designed for a lifetime of use, the new Garda uses 6061 Alloy material with a 30mm profile rim for superior aerodynamic performance. It features high end sealed bearing hubs for maximum life. The Garda is the perfect choice for race teams or riders working with a budget who still want to ride wheels made with quality materials and built by masters of wheelbuilding.

40

Rim Alloy -25mm -Sleeved

ETRTO 13-622


Rear Hub 2 sealed bearings, 2 loose ball bearing -Straight Pull

Lacing Front 20H - Radial

Lacing Rear 24H - 2 Cross Drive side / Radial Non Drive side

Spokes PRO-LITE 2.3mm stainless steel aero spokes straight pull

Nipples Alloy

Skewer Alloy


ComoFullAlloyRacingWheelsetRace Proven. A superior value wheelset, with tried and tested cup and cone style bearings, the Como is a dependable, stalwart choice for training, commuting, casual long-distance riding or even stepping in as a backup wheelset for race day. The 30mm profile gives superior aerodynamic performance.


ETRTO 13-622

Front Hub CNC ground cup & cone w/Ball Bearings - 20H

Rear Hub CNC ground cup & cone w/Ball Bearings - 24H



Nipples Brass

Skewer Alloy

Weight F/R

Shimano: 906g / 1192g

Campy: 906g / 1255g


ETRTO 13-622

Front Hub 2 sealed bearings - 28H for disc brake

Rear Hub 4 sealed bearings - 32H for disc brake

Lacing Front: 3 Cross Rear: 3 Cross

Spokes PRO-LITE 2.8 mm stainless steel aero spokes

Nipples Brass

Skewer Alloy


LuccaFullAlloyDiscEnabledCycloCrossWheelset

Mud, rocks, grass and grime. These are the domain of cyclocross – and the bane of rim brake performance. Enter the disc brake.Say goodbye to uncertain braking.Hand-built quality gives the Lucca the strength and rigidity that people have come to expect from Pro-Lite.The Lucca will be a perfect match for the newly updated Piemonte II which complies with new UCI regulations allowing disc brakes in cyclocross competition.


ETRTO 13-622

Front Hub 2 sealed bearings

Rear Hub 2 sealed bearings and 2 loose ball bearings



Nipples Brass

Skewer Alloy


41

RosaCarbon Track Wheelset - 50mm or 90mm


50mm / 50 mm 732g / 840g


90mm / 90mm 975g / 1076g

ROSA-P55-MT

ROSA-P99-MT

Rim High modulus Carbon. Tubular

ETRTO 13-622

Front Hub Rosa Track - 20H

Rear Hub Rosa Track - 24H - Double Sided Thread



Nipples Integrated

Skewer Non-Slipping Axle lock nut

Accessories 16t & 15t (1/2 x 1/8") Sprocket / Lock ring / Wheelbags. Spare Spoke set. Tools.

The carbon rims used on the Rosa are the same rims that allowed the Gavia and Vicenza to pass the UCI crash testing with almost negligible damage.

42

Rim Alloy - 30 mm / Clincher / Pinned

ETRTO 13-622

Front Hub Rosa Track - 32H

Rear Hub Rosa Track - 36H - Double Sided Thread



Nipples Brass 14G

Skewer Non-Slipping Axle lock nut

Accessories 16t & 15t (1/2 x 1/8") Sprocket / Lock ring

Weight F/R 1066g / 1180g

RosaFullAlloyTrackWheel-30mm

Building a true track wheel is all about balancing power transfer with durability. Track wheels require tremendous strength and fatigue resistance to deal with massive torque from riders strong enough to rip spokes clean out.

The finest Swedish stainless steel goes into Pro-Lite spokes. Produced with precision machined threads, they are laced into thoroughly lubricated, fine-tolerance nipples, decreasing unwanted residual spoke torsion. Mix that with super-low resistance bearings and you have the Rosa.

Designed by people who have raced and won on the track and understand the lure of the podium.

Another great feauture is the double sided rear hub allowing you to easily switch the sprocket. Naturally, we include two sprockets. Truly Race Ready.

43

Everybody knows that carbon fibre is light and strong. But not everybody is familiar with the intricacies of multi-directional forces within a hub. A deep knowledge of carbon fibre, calling on more than 30 years of wheelbuilding experience, has helped the R&D team to put together a hub with a carbon fibre shell carefully bonded to alloy flanges and super low friction bearings.

Using a revolutionary rim with an I-Beam internal structure laced to a composite/alloy hub, the Aneto XC brings anorexic weight to durability and versatility.

2 in 1 front hub - compatible with QR and 15mm thru-axles3 in 1 rear hub - compatible with X12, 12mm and QR

Carbon/alloy Front Hub I-Beam rim internals

Rim Alloy - I.B.T. / Flash Welded / Disc Brake / Reinforced Eyelets

ETRTO 19-559


2 in 1 (15mm & QR)

Rear Hub 4 sealed bearings - Straight Pull

QR, 12mm, X12mm (O.L.D 142 mm)

Lacing Front Radial & 2 Cross - 24H

Lacing Rear 3 Cross - 28H

Spokes PRO-LITE 2.0-1.8mm stainless steel Round spokes

Nipples Alloy Oversize

Weight Front: 632g / Rear: 970g

Aneto XCAlloyXCWheelsetwithHybridCarbonFibreFrontHub

I.B.T.I Beam Technology

Flash Welded

Front hub:Carbon Fiber bodybonded to alloy

Rear hub - Alloy

44

Aragon AMFullAlloyAllMountainWheelset

With the same I-Beam rim as the Aneto XC uses, the Aragon adds the strength of an overbuilt All-Mountain hub to perfectly blend light weight together with serious durability. The Aragon doesn’t shy away from taking its fair share of knocks while you blast over rocks, roots and anything else in your path.

3 in 1 front hub - compatible with 20mm, 15mm or standard QR thru-axles3 in 1 rear hub - compatible with X12, 12mm and QR

I-Beam rim internals

Rim Alloy - I.B.T. / Flash Welded / Disc Brake / Reinforced Eyelets

ETRTO 21-559

Front Hub 2 sealed bearings - 28H - Straight Pull

3 in 1 (20mm, 15mm & QR)

Rear Hub 4 sealed bearings - 32 H - Straight Pull

Rear: QR, 12mm, X12mm (O.L.D 142mm)

Lacing Front Radial & 2 Cross -28H

Lacing Rear 3 Cross - 32H

Spokes PRO-LITE 2.0-1.8mm stainless steel round spokes

Nipples Alloy Oversize



Flash Welded

45

VeletaVeleta-FullAlloyMTBWheelset(Disconly)

Rim Alloy -I.B.T .- Sleeved / Disc Brake/ Eyelets Reinforced

ETRTO 26": 21-55929": 21-622

Front Hub 2 sealed bearings - 32 H - Straight Pull

2 in 1 (15mm & QR)

Rear Hub 2 sealed bearings - 32 H - Straight Pull

QR only

Lacing Front 3 Cross

Lacing Rear 3 Cross

Spokes PRO-LITE 2.0mm stainless steel round spokes

Nipples Brass

Weight 26" Front: 918g / Rear: 1090g29" Front: 986g / Rear: 1160g

Quality, affordability and versatility. The Veleta wins on all counts. The slick and sexy disc-only rim is made with the same kind of production standards that you would expect to find in top end race wheels. This means that you will get consistently high quality wheels that are strong and trouble free.

With the Veleta, you can add 100% hand-built quality to your wish list.

2 in 1 front hub - compatible with QR and 15mm thru-axles

The rear hub comes set up for standard QR.I-Beam rim internals

Available in 29" or 26".

Rim Alloy - Pinned / CNC side wall

ETRTO 19-559

Front Hub CNC ground cup & cone w/ball bearings

Rear Hub CNC ground cup & cone w/ball bearings

Lacing Front 32H - 3 Cross

Lacing Rear 32H - 3 Cross


Nipples Brass



Sleeved

46

TeideFullAlloyMTBWheelset(RimBrake/Disc)

Taking the aerodynamic design from the Veleta and adding CNC machined braking surfaces to the rims, the Teide enjoys the same hand-built quality, affordability and versatility as the Veleta.

Especially useful for people who own several bikes with and without disc brakes, you can’t go wrong with the Teide.

Rim Alloy - Pinned / CNC side wall

ETRTO 19-559

Front Hub CNC ground cup & cone w/ball bearings

Rear Hub CNC ground cup & cone w/ball bearings

Lacing Front 32H - 3 Cross

Lacing Rear 32H - 3 Cross


Nipples Brass



Sleeved

Pinned

47

Forks Liguria Ponente Liguria Levante

GiralbaGrande

Road Road

Road Road

Weight: 395g

Carbon Monocoque Tapered(1.5" to 1-1/8")

Offset: 43mm

Weight: 398g

Carbon Monocoque Tapered(1.5" to 1-1/8")

Offset: 43mm

Weight: 382g

Carbon Monocoque

Offset: 43mm

Weight: 520g

Carbon or Alloy Steerer

Offset: 43mm

48

Ferrara

Weight: 450g

Carbon Steerer

Offset: 43mm

Offset 38mm

Lenght 440mm (Crown to Axle)

Weight: 910g

Offset 47mm

Lenght 470mm (Crown to Axle)

Weight: 950g

Weight: 498g

Carbon or Alloy Steerer

Offset: 43mm

Weight: 840g

Alloy Steerer

Offset: 38 mm

26 inch

29 inch

Giavanni

Gorizia TT Gorizia TK

Enna II

Sold Separately

Road CycloCross

For Disc or CantileverBrakes

TrackTime Trial MTB - 26" or 29"

Weight: 460g

Carbon Steerer

Offset: 38 mm

49

AnconaIntegrated Headset for Tapered Headtubes

Code PL-HS-INT-CAM PL-HS-INT-CAK PL-HS-INT- CAB

Type Campy Cane Creek FSA

Semi Integrated

OD (mm) 41.8 41 50

Angular Contact Bearing 45º/45º 36º/45º 36º/45º

Head Tube OD 45mm or 46mm 45mm or 46mm 50mm

Weight 68g 58g 80g

Supplied with star nut for alloy steerer (26g)

Belluno Conventional 1-1/8" headset

Code PL-HS-INT-ANC

Type Tapered 1.5"- 1 1/8"

OD 51.2mm lower, 41.8mm upper

Angular Contact Bearing 45º/45º

Head Tube OD 56mm

Weight 76g

PL-HS-INT-CMC PL-HS-INT-CMK PL-HS-INT-CMB

Campy Cane Creek FSA

Semi Integrated

41.8 41 50

45º/45º 36º/45º 36º/45º

45mm or 46mm 45mm or 46mm 50mm

106g 116g 118g

Available with Cable Hanger for CycloCross

• High rolling sealed anglular contact bearings

• Super smooth running no matter how heavily tightened

• Fit it and forget it.

Supplied with star nut for alloy steerer (26g)

CODE Spec

PL-HS-01 Ahead 1-1/8

Stack (top) 17.2mm Stack (bottom) 13.8mm

This wedge is designed to be used with forks that have carbon steerers without damaging them.

Please remember to request this item as needed.

Weight: 42g

Wedge for Carbon Steerer (optional)

Supplied with Wedge for carbon and alloysteerer(42)

Headsets

Arezzo - For Cantilever BrakesAmpezzoIntegrated Headset

50

Wedge for Carbon Steerer (optional)

Vercelli

Weight: 250g @ 42cm

Weight: 282g @ 42cm

• AL 6061 Racing handlebar • Triple Butted taper bar • Cable routing for Shimano and Campagnolo • Bar center 31.8mm • Shot peened black finish • Sizes: 36, 38, 40, 42, 44cm (center to center)

6061Alloy

Weight: 282g @ 42 cm

• AL 7050 Racing handlebar • Triple Butted taper bar - super low weight • Cable routing for Shimano and Campagnolo • Bar center 31.8mm • Shot peened black finish• Sizes: 40, 42, 44cm (center to center)

More commonly found in the aircraft industry, the exotic 7050 alloy is excellent for non-welded applications and takes advantage of resistance to stress cracking, allowing us to make a light yet strong bar that will surprise you.

7050Alloy

Santa Marina

The Santa Marina track bar is yet another great addition to the Pro-lite range. It is light yet very strong. Best of all, this bar is designed for the track by track riders. Manufactured from 6061 alloy tubing and then finished with shot peening to help increase the strength of the bar. The drop section of the bar is produced longer than other brands of track bars to allow the rider to cut the lower section to the exact length they require.

• Sizes: 40, 42, 44cm (center to center)

Handlebars

Track Handlebar

51

The Salemo Aero bar and extenders are perfect for either Time Trial or Triathlon use. Amazing stiffness, lightness and performance let the rider really focus on giving 100% effort to the ride. Microadjustors on the extensions allow the rider to fine tune their position to exactly where they want to be with a minimum of time and hassle.

• Extremely aerodynamic - designed using L.E.D.T. - Leading Edge Deflection Technology• Constructed to allow maximum adjustments without interfering with the aerodynamic features• Clamps are also removable for track use.


Barbore D 31.8mm

Clamp A 150mm

Reach B 163.5mm

Angle R 165mm

Rise H 20mm

Width L 400/420/440

Trieste Solo AlloyAerobaronly

Triathlon

TimeTrial

A super sleek product that will enhance any rider's performance. Rigid, stylish and at a price that blows the other brands away. Great for use on the road or track.

Salemo Full Carbon Aero Bar with Extenders

Barbore D 31.8mm

Clamp A 125mm

Reach B 150mm

Angle R 160mm

Rise H 35mm

Width L 420mm


52

The EPO Plus range is another racer-designed item benefiting from our use of wind-tunnel aerodynamics. These bolt-on extenders show our relentless pursuit of excellence and ultimate versatility for your desired geometry. The EPO Plus refines comfort for longer rides when the last thing you want to be thinking of is how much your arms ache.

Time Trial

Triathlon

With adjustments to width, angle and even height, it is possible to reach the most aggressive position with the maximum comfort to achieve maximum output.

The robust construction and rigid outriggers will harness your energy for powerful starts and out-of-the saddle efforts.

EPO Plus Enhanced-Power-Output

• New adjustors under the pads • Width and angle of arm rests fully

adjustable • Detachable pads • Clamp on type adaptor, available for

25.4, 26.0 and 31.8mm

Time TrialTriathlon

Trieste AlloyAeroBarwithEPOPlusExtenders

Weight: 470g

Extension Angle

90mm ± 7°

100mm ± 7°

110mm ± 7°

120mm ± 7°

Parma

Extension Angle

60mm ± 6°

70mm ± 6°

80mm ± 6°

90mm ± 10°

100mm ± 10°

110mm ± 10°

120mm ± 10°

Extension Angle

90mm ± 6°

100mm ± 6°

110mm ± 6°

120mm ± 6°

ElbrusUltra-Lite 2014 Alloy wrapped in Carbon Fibre, to absorb vibration and increase stiffness.4 bolts for better load spreading at the clamp.H-type plate maximizes grip with minimum weight.

PedrosaOne piece forged to maximise strength and rigidity.4 bolts for better load spreading at the clamp.

7050 forged Alloy, wide bolt pattern and a custom, fine-tuned contact surface plate take the Parma up a notch.

You won't want to miss it.

Weight: 100g @ 90mm

Weight: 124g @ 100mm



Parma 7050AlloyStem

Elbrus2014AlloyCarbonWrappedStem

Pedrosa3DForged6061AlloyStem

53

54

Full Monocoque Carbon SeatpostNew for the 2012 model year!

New custom designed rail clamp for even greater adjustability, easier use and more solid performance.

Incredibly, we managed to reduce the weight by 22% for same length.

Size Weight

27.2 210g

31.6 228g

- Carbon Fibre T700/3K

Size Weight

27.2 235g

31.6 242g

• 7075 Alloy Head (CNC machined)• Ultra Light 2014 post • Quick set hassle-free one-tool adjustment• Extended, reversible rail support • 350mm length • Available in 27.2mm and 31.6mm

-Alloy2014

• 7075 Alloy Head (CNC machined)• High modulus composite T700 3K carbon post • Quick set hassle-free one-tool adjustment • Extended, reversible rail support • 350mm length • Available in 27.2mm and 31.6mm

Size Weight

27.2 244g

31.6 256g

Pellegrino III

Novara

Novara

55

From the rails to the unseen internals, there is no compromise. Top grade 3k carbon fibre is used throughout, with a specific designed centre region. This is one saddle that will keep you comfortable, safe and supported for as long as you can keep churning the pedals.

Weight: 164g

With a wide variety of sizes and shapes in our test rider base, we know what it takes to have a saddle that works for the individual. But this does not mean that the rider will be happy with lower quality. The rails meet the back of the saddle with a very wide stance. Coupled with a soft, flexible shell, the entire shape of the saddle will adjust to match the area of contact. Steep, smooth sides augment this and prevent chafing.

Weight: 244g

The comfort of microfibre. The strength of Cro-Moly. The shape of experience. The quality of Pro-Lite.

Designed primarily with the needs of long distance riding in mind, the San Leo’s unique profile works great with all shapes of pelvic bone structure and the smooth microfibre allows high-cadence, long-duration comfort.

Weight: 230g

A scooped design towards the back and a wider stance allows for superior support for the rider, while high quality, modern saddle construction standards combine to make a great light saddle that will carry you as fast as you can go.

Weight: 246g

Massa

Molise

San Clement

San Leo

THE FIRST RIDER WEIGHT SPECIFIC SADDLES IN THE WORLD

56

Forged 7075 alloy cranks with broad, aerodynamic arms optimized to transfer maximum torque from even the most powerful riders make a solid, reliable and attractive alternative for those who want maximum control.

The Resana is available with compact or racing chainring options and uses the outer bearing system.

Super rigid T700/3K carbon fibre is molded into a hollow form which is then cured in Pro-Lite’s own high-pressure vacuum forming machine and mated to a durable alloy pedal thread and your choice of racing or compact chainring configurations.

Crank Chainring BCD

170mm 53/39 110mm

172.5mm 53/39 110mm

175mm 53/39 110mm

170mm 50/34 110mm

172.5mm 50/34 110mm

175mm 50/34 110mm

Crank Chainring BCD

170mm 53/39 110mm

172.5mm 53/39 110mm

175mm 53/39 110mm

170mm 50/34 110mm

172.5mm 50/34 110mm

175mm 50/34 110mm

Vittorio Crankset

Resana Crankset

Crankset: 615g @ 172.5mm BB Set: 95g

Crankset: 770g @ 172.5mm BB Set: 98g

All Pro-Lite cranks use forged rings for strength which are then CNC machined to give precise, smooth shifting.

All Pro-Lite cranks use forged rings for strength which are then CNC machined to give precise, smooth shifting.

Hollow Carbon Crankset

Forged7075AlloyCrankset

57

Sardinia Crankset

This little beauty is designed to do one thing only. Deliver your power quickly and efficiently. The beautiful finish makes it stand out from the crowd, capped with state of the art CNC machined chainrings.

What more could you ask for?

Full Alloy 6061-T6 Forged CranksetAlloy T6 BCD 144 full CNC chainring 48 TChain ring: 1/2" x 1/8"Weight @ 172.5mm - 562g (Right Side) - 216g (Left Side)

Forged6061-T6AlloyCrankset

58

59

Ultra light weight 3k carbon levers

Front: 38g Rear: 43g

For optimal performance, Pro-Lite carbon brake pads provide the ideal balance of stopping power and brake feel. More importantly, they keep the rims cool enough to prevent damage during braking. Required for trouble-free use of carbon rims with carbon braking surfaces, these brake pads also deliver great stopping power for alloy braking surfaces.

Protect your investment with our wheel bag (single wheel size)

Carbon Rim Brake Pads

Valve Extender

Nipple Wrench Ice CubeSpoke Holder

Wheelset Accessories

Wheel Bag

50mm. Stackable.

BrunicoComposite Skewers

We haven't forgotten about the little things. Great accessories are essential and we have all the bases covered.

Every little bit counts!

Spoke BracesAvailable for aero 2.2mm and 3.2mm spokes Sold in package of 12

60

Clean Grip Handlebar Tape

SmoothWhiteMicrofibre

SoftGraySuede

SmoothBlackMicrofibre

SimplySensible

• Gel based cushion backing for superior comfort• Silicon bands create a perfect transition when riding

with your hands on the top of the bars. No more horrible crinkly tape, just a perfectly smooth feeling.

• Vibration damping synthetic material• ABS Polymer bar end plug with Chrome Finish• Can be removed, cleaned & re-applied several times

61

Garda Seat Clamp• Forged - CNC seat clamp • Offset cut to spread load on Carbon Seat posts• Pivoting nut to allow perfect tightening • Available for seat tube size 31.8 and 34.9 mm

ID 31.8 and 34.9, available with lip or without.

Weight: 22g / 31.8mm Weight: 24g / 34.9mm

Bassano: 25gCastel Franco: 19g

Pro Lite cages are lighter than virtually any other... but that weight saving has not been at the expense of durability. Beware cheap copies that might only look like carbon fibre.

• High Modulus Carbon 3k• Universal fitting

Water Bottle Cage

62

Bassano: 25g

The next step in the evolution of the popular Rovigo sunglasses combines style with fit factor and cutting-edge technology. The Rovigo TX has lenses that respond to bright UV light and change at a comfortable rate to a darker shade. This in turn helps prevent eye strain and headaches. Lightweight and ergonomically designed, the glasses will stay in place no matter how much you sweat and will not fog up, even in the most extreme riding conditions. Sleek new hard shell zipper case included.

Light Gray to Dark Gray

Brown to Dark Gray

Pro-Lite incorporates geometric styling to give unsurpassed fit factor. Each frame comes with 5 sets of lenses that allow you to freely manage light and mood conditions. Pro-Lite only uses specific materials that provide durable comfort.

Pro-Lite Sunglasses are designed with close ergonomic standards that fit close for light and wind rejection while the lenses offer high optical clarity. Pro-Lite sunglasses come with a soft Microfiber cloth for cleaning and a semi-hard molded polymer case.

Rovigo TX Photochromatic Sunglasses

Rovigo Sunglasses

63

Born of more than 2 years of testing, tweaking and even a couple of fresh starts, the fruits of our labour have finally matured and are ripe for the picking! European brands lead the way in clothing so our top priority was to find a way to match the quality of the best brands in the world. In order to do that, we imported DuPont Lycra, ink from Italy and a lot of European know-how. Using cutting edge fabric technology, 3D tailoring and race-inspired function we have some of the best cycling clothing you will ever wear.

Clothing

The Pro-Lite chamois has been produced from a stretchable anti-bacterial & moisture micro polyester. Designed and moulded in 3D, the Pro-Lite Chamois conforms to your anatomy, bending exactly where it should, also ensuring that the shorts don't catch your seat when getting in or out of the saddle.

The patterned weave of the fabric layer is designed to maximise moisture wicking, keeping the skin surface drier and the greatest level of comfort where it counts.

The use of mesh fabric in strategic places helps the rider stay cool and comfortable and most importantly - keep pedaling.

Double flatlock stitching is the only real choice for preventing chafing and ensuring maximum durability in an environment of heavy sweating and repeated washing.

Batch-dyed blacks and heat-sublimated with the very best inks imported from Italy will keep you looking good from every angle, even after months of heavy use.

Loose V-stitching keeps the chamois pad in place without tearing the fabric and prevents the edges of the pad from making a 'bad impression' where saddle meets flesh.

Since there are known potential side effects that can cause skin problems for some riders, we have ensured that our elastic gripper is human friendly by using hypo-allergenic silicon backing.

64

SANITIZED AG is the leading worldwide producer of antimicrobial hygiene function and material protection for textiles and plastics. For over 50 years this pioneering Swiss company has used the latest technology to develop antimicrobial hygiene solutions.

The Sanitized® hygiene function works like a built-in deodorant and effectively prevents the development of unpleasant odors on clothing, even despite heavy perspiration. It's not just the smell... you can see the benefits: your clothing remains fresh longer so you feel safe and confident the whole day through.

Genuine DuPont LYCRA® is the one of the keys to the extraordinary performance and longevity of our new clothing range. LYCRA® SPORT fabric combines stretch fibre technology and demanding fabric performance test standards, resulting from years of innovation and research in the world of sport.

Under the LYCRA® name, DuPont pioneered the engineering of movement in textiles. Coming direct from industry-leading polymer specialization factories, LYCRA® SPORT fabrics deliver a range of stretch and recovery power designed to help consumers move and perform at their best, while feeling comfortable. LYCRA® SPORT fabric is designed to move with you, in all directions.

Given the choice of top quality fabrics used by the top brands on the market, we had the freedom to find exactly what we wanted. Simply put, it's the one that performed the best when climbing 4000m ascents in tropical weather and 100% humidity, yet felt soft and warm when descending. It held up the best when we pulled too hard on the pockets, washed it too many times with things that should never be put into a washing machine and kept riding it for way more kilometers than it was meant for.

Yes, it has brand name technology behind it that makes it perform as you would expect from professional level cycling kit, but we knew you wanted more. Because you are looking for something that gives you the edge - something that goes farther... faster.

Pro-Lite cycling clothing, just like everything else we make, takes you beyond your expectations.

Highly-breathable fabric used for the jerseys is made with Coolplus®, giving the best fit, durability and comfort. Drop-needle stitching provides aeration, while the texture on the inner side stops the material from clinging to you when your body sweats.

65

Short-Sleeve Jersey

Front

Size Chart S M L XL

Chest inches 37-38 39-40 40-41 42-43

cm 94-97 97-102 102-104 105-110

Long-Sleeve Jersey

Rear

Front

Rear

66

Size Chart S M L XL

Chest inches 37-38 39-40 40-41 42-43

cm 94-97 97-102 102-104 105-110

Bib Shorts

Size Chart S M L XL

Waist inches 30-32 32-34 34-36 36-38

cm 75-81 81-86 86-91 91-96

Bib Tights

67

68

Rain Jackets

The last few years have seen some amazing new fabrics, with stunning material features. Pro-Lite rain jackets are breatheable but keep you dry both inside and out. The high tech material is not only waterproof but very light. It can be squashed down into a fist sized ball and fit into any jersey pocket.

Two models are available: Rain Jacket and Wind Jacket, each with use-specific features.

• Super light fabric• Waterproof but breathable• Windproof• Snug, aerodynamic fit• Folds up super compact for storage in jersey pocket• Mesh fabric armpit vents• Reflective piping• As seen below, the wind jacket also features a back vent that

draws air out of the garment by flapping in the wind at speed.

Bandana: seamless and a thouasnd uses.

Scarf

Mask

Desert Scarf Skullcap

HairbandHood

Headband

Pirate wrap

Buff

Arm Wamers are available with fleece lining or ultra fine with a mesh section for those rides where you might need a little or a lot of extra warmth.

Leg Wamers also come with the option for fleece lining or non fleece lining.

Arm Warmers

Leg Warmers

Arm Warmer

S M L XL

Length inches 17 1/2" 18" 18 1/2" 19"

cm 44 46 47 48

Top Width inches 8 1/2-9" 9-9 1/2" 9 1/2-10" 10-10 1/2"

cm 21-22.5 22.5-24 24-25.5 25.5-27

Leg Warmer

S M L XL

Length inches 19" 19 1/2" 20" 20 1/2"

cm 48 50 51 52

Top Width inches 15-16" 16-17" 17-18" 18-19"

cm 38-40.5 40.5-43 43-45.5 45.5-48

69

Racing Cap100% Cotton

Size (cm)

S 53-58

M 58-63

Baseball CapCotton

Cycling SocksCotton

Size Chest Clothing length

3XL 50" 32"

2XL 48" 31.25"

XL 46" 30.5"

L 44" 29.5"

M 42" 28.5"

S 40" 27.5"

Work Shirt

(inches) Chest Clothing length

Sleeve length

2XL 53" 32" 9"

XL 47" 30" 9"

L 44" 28" 8 3/4"

M 41" 27" 8 1/4"

S 38" 25" 7 1/2"

XS 35" 24" 7 1/4"

T-Shirt100% Cotton

Arm Warmer

S M L XL

Length inches 17 1/2" 18" 18 1/2" 19"

cm 44 46 47 48

Top Width inches 8 1/2-9" 9-9 1/2" 9 1/2-10" 10-10 1/2"

cm 21-22.5 22.5-24 24-25.5 25.5-27

Leg Warmer

S M L XL

Length inches 19" 19 1/2" 20" 20 1/2"

cm 48 50 51 52

Top Width inches 15-16" 16-17" 17-18" 18-19"

cm 38-40.5 40.5-43 43-45.5 45.5-48

70

Date post:	21-Mar-2016
Category:	Documents
Upload:	luby-huang
View:	232 times
Download:	3 times

Pro-Lite Distributor Catalogue 2012

Documents