Product InformationIn order to use your Pro Tools | Duet, please follow the instructions included with your Pro Tools | Duet bundle.

Please address any inquiries to your dealer or directly to Avid at:Avid Technology, Inc.280 Bernardo AvenueMountain View, CA 94043

Website: www.avid.com

Support and Knowledgebase: http://www.avid.com/US/Support

© 2014, Avid, Inc. All Rights ReservedPN: 9320-65280-00_BPrinted in the U.S.A.

www.Avid.com

www.Avid.com

www.Avid.com

Part Number 9320-65280-00_B Revision 1.0

Environmental ComplianceDisposal of Waste Equipment by Users in the European Union

This symbol on the product or its packaging indicates that this product must notbe disposed of with other waste. Instead, it is your responsibility to dispose ofyour waste equipment by handing it over to a designated collection point for therecycling of waste electrical and electronic equipment. The separate collectionand recycling of your waste equipment at the time of disposal will help conservenatural resources and ensure that it is recycled in a manner that protects humanhealth and the environment. For more information about where you can drop o�your waste equipment for recycling, please contact your local city recyclingo�ce or the dealer from whom you purchased the product.

Proposition 65 Warning

This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.

EMC (Electromagnetic Compliance)Avid declares that this product complies with the following standards regulating emissions and immunity:• FCC Part 15 Class B• ICES-003 Class B• IEC/EN 55022 Class B• IEC/EN 55024• AS/NZS CISPR 22 Class B• CISPR 22 Class B

Declaration of Conformity This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference and (2) This device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant to Part 15 of the FCC Rules.Industry Canada NoticeThis Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.

Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le matérial brouilleur du Canada.

Declaration of Conformity – (Conformité Europénne)Avid hereby declares that the product, Pro Tools | Duet, to which this declaration relates, is compliant with the following Directives or other normative documents:EMC Directive 2004/108/ECLow Voltage Directive 2006/95/ECRoHS Directive 2011/65/EU

Declaration of Conformity – Japan Avid hereby declares that the product, Pro Tools | Duet, to which this declaration relates, is in material conformity with VCCI class B.

Declaration of Conformity – Australia (ACMA) – RCM Avid hereby declares that the Pro Tools | Duet is in material conformity with AS/NZS standard requirements.

CAUTION: Changes or modifications not expressly approved by Apogee Electronics Corporation compliance could void the user’s authority to operate the equipment. Rating: 5V 3.0A

Pro Tools® | DuetQuickStart Guide

Product InformationIn order to use your Pro Tools | Duet, please follow the instructions included with your Pro Tools | Duet bundle.

Please address any inquiries to your dealer or directly to Avid at:Avid Technology, Inc.280 Bernardo AvenueMountain View, CA 94043

Website: www.avid.com

Support and Knowledgebase: http://www.avid.com/US/Support

© 2014, Avid, Inc. All Rights ReservedPN: 9320-65280-00_BPrinted in the U.S.A.

www.Avid.com

www.Avid.com

www.Avid.com

Part Number 9320-65280-00_B Revision 1.0

Environmental ComplianceDisposal of Waste Equipment by Users in the European Union

This symbol on the product or its packaging indicates that this product must notbe disposed of with other waste. Instead, it is your responsibility to dispose ofyour waste equipment by handing it over to a designated collection point for therecycling of waste electrical and electronic equipment. The separate collectionand recycling of your waste equipment at the time of disposal will help conservenatural resources and ensure that it is recycled in a manner that protects humanhealth and the environment. For more information about where you can drop o�your waste equipment for recycling, please contact your local city recyclingo�ce or the dealer from whom you purchased the product.

Proposition 65 Warning

This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.

EMC (Electromagnetic Compliance)Avid declares that this product complies with the following standards regulating emissions and immunity:• FCC Part 15 Class B• ICES-003 Class B• IEC/EN 55022 Class B• IEC/EN 55024• AS/NZS CISPR 22 Class B• CISPR 22 Class B

Declaration of Conformity This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference and (2) This device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant to Part 15 of the FCC Rules.Industry Canada NoticeThis Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.

Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le matérial brouilleur du Canada.

Declaration of Conformity – (Conformité Europénne)Avid hereby declares that the product, Pro Tools | Duet, to which this declaration relates, is compliant with the following Directives or other normative documents:EMC Directive 2004/108/ECLow Voltage Directive 2006/95/ECRoHS Directive 2011/65/EU

Declaration of Conformity – Japan Avid hereby declares that the product, Pro Tools | Duet, to which this declaration relates, is in material conformity with VCCI class B.

Declaration of Conformity – Australia (ACMA) – RCM Avid hereby declares that the Pro Tools | Duet is in material conformity with AS/NZS standard requirements.

CAUTION: Changes or modifications not expressly approved by Apogee Electronics Corporation compliance could void the user’s authority to operate the equipment. Rating: 5V 3.0A

Pro Tools® | DuetQuickStart Guide

Avid Pro Tools® | DuetQuickStart Guide

Your Apple/PC Product Connect Power Supply Connect Cable Download Avid Pro Tools IO Control Check Firmware Update Install Avid Pro Tools IO Control Choose Duet as Input & Output Connect Breakout Cable and Microphone* Connect Headphones

Votre Produit Apple/PC Connecter l'alimentation Connecter le Câble Télécharger Avid Pro Tools IO Control Consulter Mise à Jour du Firmware Installer Avid Pro Tools IO Control Choisir Duet comme Entrée et Sortie Connecter le Câble Breakout et Microphone Brancher un Casque

Il tuo Prodotto Apple/PC Collega l'alimentazione Collega il Cavo Scarica Avid Pro Tools IO Control Veri�ca il Firmware Installa Avid Pro Tools IO Control Scegliere Duet come Entrata e Uscita Collegare il Cavo Breakout e Microfono Collega le Cu�e

Ihr Apple/PC-Produkt Netzteil Anschliessen Kabel Anschliessen Apogee Avid Pro Tools IO Control Herunterladen Firmware Update Prüfen Avid Pro Tools IO Control Installieren Duet als Input & Output Auswählen Breakout-Kabel & Mikrophon Anschließen Kopfhörer Anschließen

Su Producto de Apple/PC Conecte Fuente de Poder Conecte el Cable Descarga Avid Pro Tools IO Control Compruebe Actualización de Firmware Instale Avid Pro Tools IO Control Elija Duet Como Entrada y Salida Conecte el Breakout Cable y el Micrófono Conecte los Audifonos

Seu Producto Apple/PC Conectar a Alimentação Conecte o Cabo Baixar Avid Pro Tools IO Control Veri�que Atualização de Firmware Instale Avid Pro Tools IO Control Escolha Duet Como Entrada e Saída Conecte o cabo Breakout e Microfone Conecte os Fones de Ouvido

1 2 3 4 5 76 8 9Launch Avid Pro Tools IO Control Select Mic Input Select 48 V (Condenser Mic Only)

Lancer Avid Pro Tools IO Control Sélectionner Entrée Micro Choisir 48 V (Condenser Mic)

Avvia Avid Pro Tools IO Control Seleziona Ingresso Microfono Seleziona 48 V (Mic Condensatore)

Avid Pro Tools IO Control Starten Mic Input Auswählen 48 V Auswählen (Kondensatormikrophon)

Abra Avid Pro Tools IO Control Seleccione la Entrada de Mic Seleccione 48 V (Mic Condensador)

Lançamento Avid Pro Tools IO Control Selecione Entrada Mic Selecione 48 V (Condensa Mic)

10 11 12Set Microphone Level Push Knob, Select Headphones Adjust Headphone Level

Régler le Niveau du Micro Enfoncer le Bouton, Sélectionner Casque Régler le Niveau Casque

Regola il Livello Microfono Manopola di Spinta, Seleziona le Cu�e Regola il Livello Cu�e

Mikrophonlevel Einstellen Kopfhörer-Icon per Knopfdruck Auswählen Kopfhörer-Level Einstellen

Establecer Nivel de Micrófono Presione la Perilla, Seleccione los Audifonos Ajuste Nivel de Audifonos

De�nir Nível do Microfone Clique no Botão - Selecione Fones de Ouvido Ajuste o Nível dos Fones de Ouvido

13 14 15

Part Number 9320-65280-00-B Description Duet 2.5 Quickstart Guide, InsideRevision 1.0

您的 Apple/PC 产品 连接电源 连接线缆 下载 Avid Pro Tools IO Control 检查固件更新 安装 Avid Pro Tools IO Control 将 Duet 选为输入和输出 连接转接线缆和麦克风 连接耳机 启动 Avid Pro Tools IO Control 选择麦克风输入 选择 48 V (仅电容式麦克风) 设置麦克风音量 按下旋钮，选择耳机 调整耳机音量

*Microphone Not Included

Please visit www.Avid.com/Duethelp

Avid Pro Tools® | DuetQuickStart Guide

Your Apple/PC Product Connect Power Supply Connect Cable Download Avid Pro Tools IO Control Check Firmware Update Install Avid Pro Tools IO Control Choose Duet as Input & Output Connect Breakout Cable and Microphone* Connect Headphones

Votre Produit Apple/PC Connecter l'alimentation Connecter le Câble Télécharger Avid Pro Tools IO Control Consulter Mise à Jour du Firmware Installer Avid Pro Tools IO Control Choisir Duet comme Entrée et Sortie Connecter le Câble Breakout et Microphone Brancher un Casque

Il tuo Prodotto Apple/PC Collega l'alimentazione Collega il Cavo Scarica Avid Pro Tools IO Control Veri�ca il Firmware Installa Avid Pro Tools IO Control Scegliere Duet come Entrata e Uscita Collegare il Cavo Breakout e Microfono Collega le Cu�e

Ihr Apple/PC-Produkt Netzteil Anschliessen Kabel Anschliessen Apogee Avid Pro Tools IO Control Herunterladen Firmware Update Prüfen Avid Pro Tools IO Control Installieren Duet als Input & Output Auswählen Breakout-Kabel & Mikrophon Anschließen Kopfhörer Anschließen

Su Producto de Apple/PC Conecte Fuente de Poder Conecte el Cable Descarga Avid Pro Tools IO Control Compruebe Actualización de Firmware Instale Avid Pro Tools IO Control Elija Duet Como Entrada y Salida Conecte el Breakout Cable y el Micrófono Conecte los Audifonos

Seu Producto Apple/PC Conectar a Alimentação Conecte o Cabo Baixar Avid Pro Tools IO Control Veri�que Atualização de Firmware Instale Avid Pro Tools IO Control Escolha Duet Como Entrada e Saída Conecte o cabo Breakout e Microfone Conecte os Fones de Ouvido

1 2 3 4 5 76 8 9Launch Avid Pro Tools IO Control Select Mic Input Select 48 V (Condenser Mic Only)

Lancer Avid Pro Tools IO Control Sélectionner Entrée Micro Choisir 48 V (Condenser Mic)

Avvia Avid Pro Tools IO Control Seleziona Ingresso Microfono Seleziona 48 V (Mic Condensatore)

Avid Pro Tools IO Control Starten Mic Input Auswählen 48 V Auswählen (Kondensatormikrophon)

Abra Avid Pro Tools IO Control Seleccione la Entrada de Mic Seleccione 48 V (Mic Condensador)

Lançamento Avid Pro Tools IO Control Selecione Entrada Mic Selecione 48 V (Condensa Mic)

10 11 12Set Microphone Level Push Knob, Select Headphones Adjust Headphone Level

Régler le Niveau du Micro Enfoncer le Bouton, Sélectionner Casque Régler le Niveau Casque

Regola il Livello Microfono Manopola di Spinta, Seleziona le Cu�e Regola il Livello Cu�e

Mikrophonlevel Einstellen Kopfhörer-Icon per Knopfdruck Auswählen Kopfhörer-Level Einstellen

Establecer Nivel de Micrófono Presione la Perilla, Seleccione los Audifonos Ajuste Nivel de Audifonos

De�nir Nível do Microfone Clique no Botão - Selecione Fones de Ouvido Ajuste o Nível dos Fones de Ouvido

13 14 15

Part Number 9320-65280-00-B Description Duet 2.5 Quickstart Guide, InsideRevision 1.0

您的 Apple/PC 产品 连接电源 连接线缆 下载 Avid Pro Tools IO Control 检查固件更新 安装 Avid Pro Tools IO Control 将 Duet 选为输入和输出 连接转接线缆和麦克风 连接耳机 启动 Avid Pro Tools IO Control 选择麦克风输入 选择 48 V (仅电容式麦克风) 设置麦克风音量 按下旋钮，选择耳机 调整耳机音量

*Microphone Not Included

Please visit www.Avid.com/Duethelp

Avid Pro Tools® | DuetQuickStart Guide

Your Apple/PC Product Connect Power Supply Connect Cable Download Avid Pro Tools IO Control Check Firmware Update Install Avid Pro Tools IO Control Choose Duet as Input & Output Connect Breakout Cable and Microphone* Connect Headphones

Votre Produit Apple/PC Connecter l'alimentation Connecter le Câble Télécharger Avid Pro Tools IO Control Consulter Mise à Jour du Firmware Installer Avid Pro Tools IO Control Choisir Duet comme Entrée et Sortie Connecter le Câble Breakout et Microphone Brancher un Casque

Il tuo Prodotto Apple/PC Collega l'alimentazione Collega il Cavo Scarica Avid Pro Tools IO Control Veri�ca il Firmware Installa Avid Pro Tools IO Control Scegliere Duet come Entrata e Uscita Collegare il Cavo Breakout e Microfono Collega le Cu�e

Ihr Apple/PC-Produkt Netzteil Anschliessen Kabel Anschliessen Apogee Avid Pro Tools IO Control Herunterladen Firmware Update Prüfen Avid Pro Tools IO Control Installieren Duet als Input & Output Auswählen Breakout-Kabel & Mikrophon Anschließen Kopfhörer Anschließen

Su Producto de Apple/PC Conecte Fuente de Poder Conecte el Cable Descarga Avid Pro Tools IO Control Compruebe Actualización de Firmware Instale Avid Pro Tools IO Control Elija Duet Como Entrada y Salida Conecte el Breakout Cable y el Micrófono Conecte los Audifonos

Seu Producto Apple/PC Conectar a Alimentação Conecte o Cabo Baixar Avid Pro Tools IO Control Veri�que Atualização de Firmware Instale Avid Pro Tools IO Control Escolha Duet Como Entrada e Saída Conecte o cabo Breakout e Microfone Conecte os Fones de Ouvido

1 2 3 4 5 76 8 9Launch Avid Pro Tools IO Control Select Mic Input Select 48 V (Condenser Mic Only)

Lancer Avid Pro Tools IO Control Sélectionner Entrée Micro Choisir 48 V (Condenser Mic)

Avvia Avid Pro Tools IO Control Seleziona Ingresso Microfono Seleziona 48 V (Mic Condensatore)

Avid Pro Tools IO Control Starten Mic Input Auswählen 48 V Auswählen (Kondensatormikrophon)

Abra Avid Pro Tools IO Control Seleccione la Entrada de Mic Seleccione 48 V (Mic Condensador)

Lançamento Avid Pro Tools IO Control Selecione Entrada Mic Selecione 48 V (Condensa Mic)

10 11 12Set Microphone Level Push Knob, Select Headphones Adjust Headphone Level

Régler le Niveau du Micro Enfoncer le Bouton, Sélectionner Casque Régler le Niveau Casque

Regola il Livello Microfono Manopola di Spinta, Seleziona le Cu�e Regola il Livello Cu�e

Mikrophonlevel Einstellen Kopfhörer-Icon per Knopfdruck Auswählen Kopfhörer-Level Einstellen

Establecer Nivel de Micrófono Presione la Perilla, Seleccione los Audifonos Ajuste Nivel de Audifonos

De�nir Nível do Microfone Clique no Botão - Selecione Fones de Ouvido Ajuste o Nível dos Fones de Ouvido

13 14 15

Part Number 9320-65280-00-B Description Duet 2.5 Quickstart Guide, InsideRevision 1.0

您的 Apple/PC 产品 连接电源 连接线缆 下载 Avid Pro Tools IO Control 检查固件更新 安装 Avid Pro Tools IO Control 将 Duet 选为输入和输出 连接转接线缆和麦克风 连接耳机 启动 Avid Pro Tools IO Control 选择麦克风输入 选择 48 V (仅电容式麦克风) 设置麦克风音量 按下旋钮，选择耳机 调整耳机音量

*Microphone Not Included

Please visit www.Avid.com/Duethelp

Avid Pro Tools® | DuetQuickStart Guide

Your Apple/PC Product Connect Power Supply Connect Cable Download Avid Pro Tools IO Control Check Firmware Update Install Avid Pro Tools IO Control Choose Duet as Input & Output Connect Breakout Cable and Microphone* Connect Headphones

Votre Produit Apple/PC Connecter l'alimentation Connecter le Câble Télécharger Avid Pro Tools IO Control Consulter Mise à Jour du Firmware Installer Avid Pro Tools IO Control Choisir Duet comme Entrée et Sortie Connecter le Câble Breakout et Microphone Brancher un Casque

Il tuo Prodotto Apple/PC Collega l'alimentazione Collega il Cavo Scarica Avid Pro Tools IO Control Veri�ca il Firmware Installa Avid Pro Tools IO Control Scegliere Duet come Entrata e Uscita Collegare il Cavo Breakout e Microfono Collega le Cu�e

Ihr Apple/PC-Produkt Netzteil Anschliessen Kabel Anschliessen Apogee Avid Pro Tools IO Control Herunterladen Firmware Update Prüfen Avid Pro Tools IO Control Installieren Duet als Input & Output Auswählen Breakout-Kabel & Mikrophon Anschließen Kopfhörer Anschließen

Su Producto de Apple/PC Conecte Fuente de Poder Conecte el Cable Descarga Avid Pro Tools IO Control Compruebe Actualización de Firmware Instale Avid Pro Tools IO Control Elija Duet Como Entrada y Salida Conecte el Breakout Cable y el Micrófono Conecte los Audifonos

Seu Producto Apple/PC Conectar a Alimentação Conecte o Cabo Baixar Avid Pro Tools IO Control Veri�que Atualização de Firmware Instale Avid Pro Tools IO Control Escolha Duet Como Entrada e Saída Conecte o cabo Breakout e Microfone Conecte os Fones de Ouvido

1 2 3 4 5 76 8 9Launch Avid Pro Tools IO Control Select Mic Input Select 48 V (Condenser Mic Only)

Lancer Avid Pro Tools IO Control Sélectionner Entrée Micro Choisir 48 V (Condenser Mic)

Avvia Avid Pro Tools IO Control Seleziona Ingresso Microfono Seleziona 48 V (Mic Condensatore)

Avid Pro Tools IO Control Starten Mic Input Auswählen 48 V Auswählen (Kondensatormikrophon)

Abra Avid Pro Tools IO Control Seleccione la Entrada de Mic Seleccione 48 V (Mic Condensador)

Lançamento Avid Pro Tools IO Control Selecione Entrada Mic Selecione 48 V (Condensa Mic)

10 11 12Set Microphone Level Push Knob, Select Headphones Adjust Headphone Level

Régler le Niveau du Micro Enfoncer le Bouton, Sélectionner Casque Régler le Niveau Casque

Regola il Livello Microfono Manopola di Spinta, Seleziona le Cu�e Regola il Livello Cu�e

Mikrophonlevel Einstellen Kopfhörer-Icon per Knopfdruck Auswählen Kopfhörer-Level Einstellen

Establecer Nivel de Micrófono Presione la Perilla, Seleccione los Audifonos Ajuste Nivel de Audifonos

De�nir Nível do Microfone Clique no Botão - Selecione Fones de Ouvido Ajuste o Nível dos Fones de Ouvido

13 14 15

Part Number 9320-65280-00-B Description Duet 2.5 Quickstart Guide, InsideRevision 1.0

您的 Apple/PC 产品 连接电源 连接线缆 下载 Avid Pro Tools IO Control 检查固件更新 安装 Avid Pro Tools IO Control 将 Duet 选为输入和输出 连接转接线缆和麦克风 连接耳机 启动 Avid Pro Tools IO Control 选择麦克风输入 选择 48 V (仅电容式麦克风) 设置麦克风音量 按下旋钮，选择耳机 调整耳机音量

*Microphone Not Included

Please visit www.Avid.com/Duethelp

Avid Pro Tools® | DuetQuickStart Guide

Your Apple/PC Product Connect Power Supply Connect Cable Download Avid Pro Tools IO Control Check Firmware Update Install Avid Pro Tools IO Control Choose Duet as Input & Output Connect Breakout Cable and Microphone* Connect Headphones

Votre Produit Apple/PC Connecter l'alimentation Connecter le Câble Télécharger Avid Pro Tools IO Control Consulter Mise à Jour du Firmware Installer Avid Pro Tools IO Control Choisir Duet comme Entrée et Sortie Connecter le Câble Breakout et Microphone Brancher un Casque

Il tuo Prodotto Apple/PC Collega l'alimentazione Collega il Cavo Scarica Avid Pro Tools IO Control Veri�ca il Firmware Installa Avid Pro Tools IO Control Scegliere Duet come Entrata e Uscita Collegare il Cavo Breakout e Microfono Collega le Cu�e

Ihr Apple/PC-Produkt Netzteil Anschliessen Kabel Anschliessen Apogee Avid Pro Tools IO Control Herunterladen Firmware Update Prüfen Avid Pro Tools IO Control Installieren Duet als Input & Output Auswählen Breakout-Kabel & Mikrophon Anschließen Kopfhörer Anschließen

Su Producto de Apple/PC Conecte Fuente de Poder Conecte el Cable Descarga Avid Pro Tools IO Control Compruebe Actualización de Firmware Instale Avid Pro Tools IO Control Elija Duet Como Entrada y Salida Conecte el Breakout Cable y el Micrófono Conecte los Audifonos

Seu Producto Apple/PC Conectar a Alimentação Conecte o Cabo Baixar Avid Pro Tools IO Control Veri�que Atualização de Firmware Instale Avid Pro Tools IO Control Escolha Duet Como Entrada e Saída Conecte o cabo Breakout e Microfone Conecte os Fones de Ouvido

1 2 3 4 5 76 8 9Launch Avid Pro Tools IO Control Select Mic Input Select 48 V (Condenser Mic Only)

Lancer Avid Pro Tools IO Control Sélectionner Entrée Micro Choisir 48 V (Condenser Mic)

Avvia Avid Pro Tools IO Control Seleziona Ingresso Microfono Seleziona 48 V (Mic Condensatore)

Avid Pro Tools IO Control Starten Mic Input Auswählen 48 V Auswählen (Kondensatormikrophon)

Abra Avid Pro Tools IO Control Seleccione la Entrada de Mic Seleccione 48 V (Mic Condensador)

Lançamento Avid Pro Tools IO Control Selecione Entrada Mic Selecione 48 V (Condensa Mic)

10 11 12Set Microphone Level Push Knob, Select Headphones Adjust Headphone Level

Régler le Niveau du Micro Enfoncer le Bouton, Sélectionner Casque Régler le Niveau Casque

Regola il Livello Microfono Manopola di Spinta, Seleziona le Cu�e Regola il Livello Cu�e

Mikrophonlevel Einstellen Kopfhörer-Icon per Knopfdruck Auswählen Kopfhörer-Level Einstellen

Establecer Nivel de Micrófono Presione la Perilla, Seleccione los Audifonos Ajuste Nivel de Audifonos

De�nir Nível do Microfone Clique no Botão - Selecione Fones de Ouvido Ajuste o Nível dos Fones de Ouvido

13 14 15

Part Number 9320-65280-00-B Description Duet 2.5 Quickstart Guide, InsideRevision 1.0

您的 Apple/PC 产品 连接电源 连接线缆 下载 Avid Pro Tools IO Control 检查固件更新 安装 Avid Pro Tools IO Control 将 Duet 选为输入和输出 连接转接线缆和麦克风 连接耳机 启动 Avid Pro Tools IO Control 选择麦克风输入 选择 48 V (仅电容式麦克风) 设置麦克风音量 按下旋钮，选择耳机 调整耳机音量

*Microphone Not Included

Please visit www.Avid.com/Duethelp

Product InformationIn order to use your Pro Tools | Duet, please follow the instructions included with your Pro Tools | Duet bundle.

Please address any inquiries to your dealer or directly to Avid at:Avid Technology, Inc.280 Bernardo AvenueMountain View, CA 94043

Website: www.avid.com

Support and Knowledgebase: http://www.avid.com/US/Support

© 2014, Avid, Inc. All Rights ReservedPN: 9320-65280-00_BPrinted in the U.S.A.

www.Avid.com

www.Avid.com

www.Avid.com

Part Number 9320-65280-00_B Revision 1.0

Environmental ComplianceDisposal of Waste Equipment by Users in the European Union

This symbol on the product or its packaging indicates that this product must notbe disposed of with other waste. Instead, it is your responsibility to dispose ofyour waste equipment by handing it over to a designated collection point for therecycling of waste electrical and electronic equipment. The separate collectionand recycling of your waste equipment at the time of disposal will help conservenatural resources and ensure that it is recycled in a manner that protects humanhealth and the environment. For more information about where you can drop o�your waste equipment for recycling, please contact your local city recyclingo�ce or the dealer from whom you purchased the product.

Proposition 65 Warning

This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.

EMC (Electromagnetic Compliance)Avid declares that this product complies with the following standards regulating emissions and immunity:• FCC Part 15 Class B• ICES-003 Class B• IEC/EN 55022 Class B• IEC/EN 55024• AS/NZS CISPR 22 Class B• CISPR 22 Class B

Declaration of Conformity This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference and (2) This device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant to Part 15 of the FCC Rules.Industry Canada NoticeThis Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.

Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le matérial brouilleur du Canada.

Declaration of Conformity – (Conformité Europénne)Avid hereby declares that the product, Pro Tools | Duet, to which this declaration relates, is compliant with the following Directives or other normative documents:EMC Directive 2004/108/ECLow Voltage Directive 2006/95/ECRoHS Directive 2011/65/EU

Declaration of Conformity – Japan Avid hereby declares that the product, Pro Tools | Duet, to which this declaration relates, is in material conformity with VCCI class B.

Declaration of Conformity – Australia (ACMA) – RCM Avid hereby declares that the Pro Tools | Duet is in material conformity with AS/NZS standard requirements.

CAUTION: Changes or modifications not expressly approved by Apogee Electronics Corporation compliance could void the user’s authority to operate the equipment. Rating: 5V 3.0A

Pro Tools® | DuetQuickStart Guide

Guide Part Number 9329-65463-00_A MNL PDF, QS GUIDE PRO TOOLS DUET

Product InformationIn order to use your Pro Tools | Duet, please follow the instructions included with your Pro Tools | Duet bundle.

Please address any inquiries to your dealer or directly to Avid at:Avid Technology, Inc.280 Bernardo AvenueMountain View, CA 94043

Website: www.avid.com

Support and Knowledgebase: http://www.avid.com/US/Support

© 2014, Avid, Inc. All Rights ReservedPN: 9320-65280-00_BPrinted in the U.S.A.

www.Avid.com

www.Avid.com

www.Avid.com

Part Number 9320-65280-00_B Revision 1.0

Environmental ComplianceDisposal of Waste Equipment by Users in the European Union

This symbol on the product or its packaging indicates that this product must notbe disposed of with other waste. Instead, it is your responsibility to dispose ofyour waste equipment by handing it over to a designated collection point for therecycling of waste electrical and electronic equipment. The separate collectionand recycling of your waste equipment at the time of disposal will help conservenatural resources and ensure that it is recycled in a manner that protects humanhealth and the environment. For more information about where you can drop o�your waste equipment for recycling, please contact your local city recyclingo�ce or the dealer from whom you purchased the product.

Proposition 65 Warning

This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.

EMC (Electromagnetic Compliance)Avid declares that this product complies with the following standards regulating emissions and immunity:• FCC Part 15 Class B• ICES-003 Class B• IEC/EN 55022 Class B• IEC/EN 55024• AS/NZS CISPR 22 Class B• CISPR 22 Class B

Declaration of Conformity This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference and (2) This device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant to Part 15 of the FCC Rules.Industry Canada NoticeThis Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.

Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le matérial brouilleur du Canada.

Declaration of Conformity – (Conformité Europénne)Avid hereby declares that the product, Pro Tools | Duet, to which this declaration relates, is compliant with the following Directives or other normative documents:EMC Directive 2004/108/ECLow Voltage Directive 2006/95/ECRoHS Directive 2011/65/EU

Declaration of Conformity – Japan Avid hereby declares that the product, Pro Tools | Duet, to which this declaration relates, is in material conformity with VCCI class B.

Declaration of Conformity – Australia (ACMA) – RCM Avid hereby declares that the Pro Tools | Duet is in material conformity with AS/NZS standard requirements.

CAUTION: Changes or modifications not expressly approved by Apogee Electronics Corporation compliance could void the user’s authority to operate the equipment. Rating: 5V 3.0A

Pro Tools® | DuetQuickStart Guide

Product InformationIn order to use your Pro Tools | Duet, please follow the instructions included with your Pro Tools | Duet bundle.

Please address any inquiries to your dealer or directly to Avid at:Avid Technology, Inc.280 Bernardo AvenueMountain View, CA 94043

Website: www.avid.com

Support and Knowledgebase: http://www.avid.com/US/Support

© 2014, Avid, Inc. All Rights ReservedPN: 9320-65280-00_BPrinted in the U.S.A.

www.Avid.com

www.Avid.com

www.Avid.com

Part Number 9320-65280-00_B Revision 1.0

Environmental ComplianceDisposal of Waste Equipment by Users in the European Union

This symbol on the product or its packaging indicates that this product must notbe disposed of with other waste. Instead, it is your responsibility to dispose ofyour waste equipment by handing it over to a designated collection point for therecycling of waste electrical and electronic equipment. The separate collectionand recycling of your waste equipment at the time of disposal will help conservenatural resources and ensure that it is recycled in a manner that protects humanhealth and the environment. For more information about where you can drop o�your waste equipment for recycling, please contact your local city recyclingo�ce or the dealer from whom you purchased the product.

Proposition 65 Warning

This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.

EMC (Electromagnetic Compliance)Avid declares that this product complies with the following standards regulating emissions and immunity:• FCC Part 15 Class B• ICES-003 Class B• IEC/EN 55022 Class B• IEC/EN 55024• AS/NZS CISPR 22 Class B• CISPR 22 Class B

Declaration of Conformity This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference and (2) This device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant to Part 15 of the FCC Rules.Industry Canada NoticeThis Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.

Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le matérial brouilleur du Canada.

Declaration of Conformity – (Conformité Europénne)Avid hereby declares that the product, Pro Tools | Duet, to which this declaration relates, is compliant with the following Directives or other normative documents:EMC Directive 2004/108/ECLow Voltage Directive 2006/95/ECRoHS Directive 2011/65/EU

Declaration of Conformity – Japan Avid hereby declares that the product, Pro Tools | Duet, to which this declaration relates, is in material conformity with VCCI class B.

Declaration of Conformity – Australia (ACMA) – RCM Avid hereby declares that the Pro Tools | Duet is in material conformity with AS/NZS standard requirements.

CAUTION: Changes or modifications not expressly approved by Apogee Electronics Corporation compliance could void the user’s authority to operate the equipment. Rating: 5V 3.0A

Pro Tools® | DuetQuickStart Guide