PROCESS29+1 SECONDS

Booklet

ITEMS QUANTITY

FOAM BOARDS 4MDF BOARD - A2 1MDF BOARD - A1 2MAGNETS 2 PAXMAGNETIC STRIPS 2 ROLLSSUPER GLUE 2 WOODEN ROD 2 SANDPAPER 2 PAINT 4 SPRAY PAINT 1LACQUER 1PIPES 2M 2BLACK CLOTH - 3.2M2PAINT BRUSH (l) 1

1

PAINT BRUSH SET 1WOODEN STICK 1MOUNTING BOARD - A2 2WOOD GLUE 1MULTIPURPOSE GLUE 1DIE 2COLORS PAPERS 5DRILL CHAINSAW & FILLE 1PRINTING

IDEA

GENERATOR

CHOSEN PROPOSAL

ENHANCE PROPOSALINSPIRATIONS

TUTORIALS

HOW TO

MAKE IT

1) Cut on A2 MDF board to size which is 37.3 cm x 38cmfor the base of the board game.2) For the stands, cut a wooden stick of 2 cm x 2 cm to thelength of 3 cm and glue it to the base of the board.3) Cut the foam board into circles with 5 different sizeswith the largest one being 30.8 cm and the smallest being5.5cm in diameter.4) Cut the mounting boards according to sizes of eachcircle which will be used as a reinforcement by stickingit on each circle.5) Magnets strips are cut and paste under each tile ofboard.6) Cut the wooden board into different lengths to be usedas the beams to elevate each board.7) Paste the printed tiles according to their sizes ontoeach individual boards.8) Final step is drill holes on each individual for thebeam that elevates the board.