Process & Instrumentation ValveEquipment for Oil & Gas
Osaka Plant
ISO 9001 certified
CAT：No.813-02E-F
Tsukuba Research Plant
OHSAS18001 certified
Vietnam Plant
ISO9001/14001 certified
Tsukuba Research Plant
ISO 14001 certified
1
Introduction Process & Instrumentation Valve Equipment for Oil & Gas.
’s flow control technologies are state of the arteverywhere: earth, ocean and sky.
has become the top manufacturing corporation for not only specific-purpose valves but also super high precision flow control systems.Our cutting edge technology is used in every area that demands the highest technology.
Solar and Fuel Cells Aerospace Marine Vessels Iron and Steel
Nano Devices Medical, Pharmaceutical and Food Ocean Development Petrochemicals Cryogenic Equipment
Semiconductor
Application & AchievementHolding a share of more than 80% of instrumentation valves for Oil & Gas plant in Japan, contributes to safety, security and reliability of the nuclear power stations also.
Oil & Gas Production
Petroleum Refining
Petrochemicals & Chemicals
GTL / DME
LNG Oil Platform
2
Process & Instrumentation Valve Equipment for Oil & Gas.
3
Products Process & Instrumentation Valve Equipment for Oil & Gas.
Manual Valves
Valves for high temperature, high pressure, and cryogenic evironments
Needle ValvesValves with precise and stable flow control, and shutoff ability
Ball ValvesBall valves that cover a wide range of purposes from general to special
Bellows ValvesMetal bellows provides reliable seal to atmosphere
Severe ServiceValveshigh pressure, high temperature, cryogenic( (
4
Products Process & Instrumentation Valve Equipment for Oil & Gas.
Manual Valves
Manifold ValvesIntegrated valves compliant with all pressure instrumentation devices and wide pressure range
Gauge ValvesGauge valves correspond to multiple flows and connections
Plug ValvesHigh performance valves that enable to switch flow paths easily and accurately
Toggle ValvesCompact Design Open and Close quickly
5
Process & Instrumentation Valve Equipment for Oil & Gas.Products
5
Automatically Operated Valves
Pneumatic Control ValvesMini-Control Valve with diaphragm actuatorProduct lineup covers a wide range of environments from high pressure to vacuum and from high temperature to extremely low temperature
Ball ValvesCompact and light weight automatic ball valves with high durability
ElectricControl ValvesElectric control valves driven by solenoid or stepping motorsHigh response performance
Fine Ceramic Ball ValvesCeramic materials offer greatest hardness and excellent abrasion and corrosion resistance.CosmixTM Ball Valves feature fine ceramics in all wetted parts.
6
Process & Instrumentation Valve Equipment for Oil & Gas.ProductsOther Valves
Check Valves
Vent Plugs
Relief Valves
Filters
Compact, lightweight safety devices for fluids
Fixed Cracking Pressure From 1/3 to 25 psig (0.03 to 1.8 bar) Standard: 1 psig
Service up to 6000 psig (413 bar)
7
Process & Instrumentation Valve Equipment for Oil & Gas.ProductsFittings Pipe Equipments
Pipe Equipments
Pipe FittingsFittings compliant with all configurations and connections
Pipes & Tubes
Flexible Tubes
Flanges & Gaskets
TUBEFittingsFittings for tubes that have connections from small to large nominal diameters,from extremely low to high temperatures, and from to vacuum to high pressure Heat & Tube
Tracing SystemsProcess tube, tracer tube, electric motor, lagging material, and PVC jacket are integrated in the product. The product can shorten the period of construction and reduce the cost of construction.
8
Process & Instrumentation Valve Equipment for Oil & Gas.ProductsEquipment for Pipe Work and Inspection
Provider Power Unit
Fine Bubble Custom Order Processing Parts
These products offer high performance in pipe construction and a wide variety of inspections.
Leak Detection Fluid
Compressor / Pump
9
Process & Instrumentation Valve Equipment for Oil & Gas.ProductsEquipment for Analysis and Sampling Pipes
IGS(Integrated Gas System)
Fine series (Clean Valves and Fittings)
Mass Flow Controllers
FCS(Flow Control System)
Thermal Type
Pressure Type
Weir Diaphragm Valves
Weirless Diaphragm Valves
These products offer the highest standard of oil free treatments in the world.
10
Process & Instrumentation Valve Equipment for Oil & Gas.ProductsOthers
Mini Channel Valves
Fail-Proof Devices (Safety Handles)
Static Fluid Mixer
These products meet various demands in relation to flow control systems.
11
Delivery Records Process & Instrumentation Valve Equipment for Oil & Gas.
Process & Instrumentation Valve Equipment for Oil & Gas and General Industries
12
Network Process & Instrumentation Valve Equipment for Oil & Gas.
We are increasing our market share worldwide.The global network capitalizes upon global trends. has a 40% share of the world market in super ultra-precise flow-control equipment. We established our global network with world-renowned cutting-edge technology.
Taiwan Service CenterTaiwan Service Center
Fujikin Korea Service CenterFujikin Korea Service Center
Fujikin Vietnam Co.,LtdFujikin Vietnam Co.,Ltd
Fujikin Singapore Pte. Ltd.Fujikin Singapore Pte. Ltd.
China Service CenterChina Service Center
Osaka High-Tech Research & Creative Development CenterOsaka High-Tech Research & Creative Development Center 東北工場
Tohoku Plant
Osaka KashiwaraEnterprise
Tohoku PlantOsaka Plant
(Osaka Distribution Center)Osaka Plant
(Osaka Distribution Center)
Tsukuba Advanced Technology Center(Tsukuba Distribution Center)Tsukuba Advanced Technology Center(Tsukuba Distribution Center)
Jap an
Our binary management system responds to customers in East and West Japan.
TK-FUJIKIN CORPORATION（2nd Factory）TK-FUJIKIN CORPORATION（2nd Factory）
TK-FUJIKIN CORPORATION（Head quarter）TK-FUJIKIN CORPORATION（Head quarter）
FUJIKIN BAC NINH INCORPORATEDFUJIKIN BAC NINH INCORPORATED
Fujikin Vietnam Co.,Ltd.Fujikin Vietnam Co.,Ltd.
Fujikin Korea Service CenterFujikin Korea Service CenterChina Service CenterChina Service CenterTaiwan Service CenterTaiwan Service Center
US Connecticut FactoryUS Connecticut Factory
FUJIKIN BAC NINH INCORPORATEDFUJIKIN BAC NINH INCORPORATED
Carten Controls Ltd. (CCL)Carten Controls Ltd. (CCL)
A globalto Asia and
The 2
m n
13
History Process & Instrumentation Valve Equipment for Oil & Gas.
Fujikin has been developing technology for over 80 years.In May 1930, 's forerunner, Kojima Shouten, was founded at Itachibori in Osaka city, Japan by the former president, Junji Kojima. We have a 80-years history of manufacturing super high precision flow control equipment, as well as specific purpose valves.
1930May: We enter the business of pipe materials, machine tools and wholesaling of metal parts. Our main business consists of exporting to mainland China and meeting domestic demand. Company founderand first president,Junji Kojima
1935January: A new engineering department is created to cater to surging demand for valve cocks. Meanwhile, the company acquires the Shigino Plant in Joto Ward, Osaka, and operations are launched. Products are sold under the “Carp” trademark.
1948January: Fujishima Koki Kabushikigaisha, a corporate body, is established, to continue with the business. *Fujishima Koki Kabushikigaisha continues to do business as the Osaka Plumbing Sanitary Trade Assoc. in the Ebie district of Fukushima Ward, Osaka. The company is a special agent of ours and is specially contracted to pipe-equipment and materials makers.
1969December: The Kansai Branch opens at a location adjacent to the Head Office.
1972July: The Nagoya Central Office is established in Nakamura Ward, Nagoya, as a base for the Tokai region.
September: Fuji Kyosokai is launched as an organization representing cooperative factories.
October: We receive approval for high-pressure gas production from the office of the governor of Osaka.
1979November: The late Toshi Kojima, Company President, becomes Chairman of the Board, and the Vice President, the late Shuhei Ogawa, becomes President.
1973February: The Osaka governor gives us an award for “contributory achievements in the implementation of outstanding devices and promoting the research and development of new technologies.”
April: Our experimental high-pressure gas manufacturing plants are certified and authorized by the Minister of International Trade and Industry.
1974July: The Yokohama Central Office is established in the Naka Ward of Yokohama as a base for the Yokohama-Kawasaki region.
October: The Keiyo Office is established in the Shinmachi district of Chiba City, as a base for the Chiba region.
October: The (former) “Fuji Technical Trading Company” is established in Kita Ward, Osaka. We succeed in producing the first domestic measurement valves for nuclear power.
1975January: The Fine Ceramic Valves, which are highly resistant to corrosion and abrasion, are developed.
1976June: A world-leading cleanroom is established inside the Osaka Plant for the production of valves for use in rockets.
1978March: We are selected as a company based in Osaka Prefecture with outstanding quality control.
August: Micrometer Super Mini Valves, for use in ultra-fine adjustments, are developed.
1970May: The electromagnetic needle valves are developed.
June: The compact casted ball valves are developed.
August: The W-bite fittingsTM are developed and go into mass production.
1971March: At the request of our customers in Western Japan, the Western Japan Central Office is established east of Hakata Station, at the center of Kita Kyushu’s industrial zone.
1954September: Fuji Kinzoku Kosaku Kabushikigaisha is founded and acquires the Itachibori sales office and the Shigino and Hikone factories of the aforementioned Fujishima Koki Kabushikigaisha. Efforts are launched to enhance the sales office.
1959March: Mechaload ValveTM, a valve for use in vacuums conditions is developed.
1961September: The superiority of forging over casting for small valves becomes clear, and so a brass forging plant and a processing facility are constructed.
1962April: We participate in the Fifth Osaka International Trade Fair.Our unique line of products, including a new corrosive-resistant alloy, FujibloyTM receives high appraisal.
1964April: QS Valve, a semi-permanent valve, is developed, and a special patent for it is acquired for 7 countries.
1966May: World prices of copper surge due to rising oil prices. In response, AlchessTM, a corrosive resistant forged aluminum valve, is successfully commercialized.
1967February: Labor-saving fittings, dubbled “LS Fittings, ” that don’t require sealant are developed.
1958June: CarpectTM, a total check valve is developed.
November: A new factory is constructed in Higashi Osaka City to respond to a surge in orders. The Shigino and Hikone plants are sold, and company facilities are to be concentrated in the new location, where new construction booms.
December: Though sales in the Kanto region had been handled by an agent, the job is taken over by the Tokyo Head Office, which opens in the Hachijobori district of Chuo Ward, in response to requests from customers.
May: The Chugoku Office is established in the Inari district of Minami Ward, Hiroshima, as a base for the Central Shikoku region.
October: The Hokuriku Central Office is established in Fukuyama City, as a base for the Hokuriku region.
1953October: A patent for the Needle Valve is acquired.
1957September: The late Toshi Kojima succeeds company founder Junji Kojima after his sudden passing.
November: Because of the need to expand, Head Office duties are relocated to the Kita Hankyu Building in the Shibata district of Kita Ward, Osaka.
November: Following the relocation of the Head Office, the old headquarters is renamed the Kansai Branch to focus its activities on sales.
1982January: PhenixTM (now New Generation CosmixTM), a fine ceramic valve jointly developed with Kyocera Corp., is given the 24th Judai Award for New Products by Nikkan Shimbun.
1981February: The development of electronic valves with the world’s smallest CV value is launched.
March: An office is established in Dusseldorf, West Germany.
April: Our company’s plants appear on Mid-sized Company Report, a program on NHK’s Educational Channel, a first for our industry and a development that generates a large response.
July: An excursion takes place to climb Mt. Fuji to mark the company’s 50 anniversary and raise employee morale.
July: An office is established in the U.S. state of New Jersey.
1980To mark the company’s 50th anniversary, Hideo Itokawa, the “father of Japanese space and rocket development,” comes to deliver a lecture. March: Our technology and the high level of quality of our projects are recognized, and our plants become certified by TUV of West Germany, a first for our industry.
July: American professor W. Edwards Deming, a world authority on quality control, visits and inspects our plants. He praises our unique quality-control system.
October: An office is established in Rotterdam, the Netherlands, as part of our strategy aimed at developing global markets.
October: We receive a commendation award from the High-Pressure Gas Society of Osaka Prefecture.
14
History Process & Instrumentation Valve Equipment for Oil & Gas.
1984January: The company receives the 17th Medium and Small Business Research Institute Award from the Medium and Small Business Research Institute.
July: Fuji Technical Trading Company changes name to Fujikin Soft Co., Ltd., responding to the need for “software” in the economy.
October: The Fine Ceramic Valves receive the Vaaler Award in the U.S., and its outstanding qualities are thereby recognized.
November: The Sendai Office is established as a base for the Tohoku region.
1985March: We take part in the 1985 Science Tsukuba World Exposition (Technocosmos) to mark our 55th anniversary, as one of the cutting-edge companies based in Osaka. It was the first time in history for companies from different industries to participate jointly in a World Expo, and we received a favorable reception. Our participation was organized under the theme of an “ultra and extreme world.”
1986January: The high-tech restaurant Gourmet 5 opens in Tsukuba Science City.
October: The late Shuhei Ogawa, then Company President, is presented the Person of Merit Commendation for High-Pressure Gas Safety from the Minister of International Trade and Industry.
November: Then Chairperson Toshi Kojima receives the Fourth Order of the Sacred Treasure. Publication of “Work Philosphy of the Daruma, Conferring a Commemoration.”
1987We successfully develop MEGA-ONETM, Japan’s first valve for use in semiconductor manufacturing.
1989April: Stage 1 of the construction of the Fujikin Tsukuba Research Plant is completed. Sapporo Central Office is established.
November: An ultra super cleanroom (Class 1) opens at the Osaka Kashiwara Enterprise.
1990April: The “Daruma Dome” is put on display at the Flower Expo to mark 60 years of our founding.
November: Carton Controls Ltd. (CCI, CCL), a U.S. and Irish precision valve company, is acquired.
1991April: We receive the Incentive Prize for the 3rd Small and Medium-sized Enterprise for products with outstanding new technologies.
1992March: The Toshi Kojima Science Education Promotion Fund is established (now called the Fujikin Kojima-Ogawa Science Education Promotion Fund).
April: Success is achieved in artificially breeding Sturgeon at the Fujikin Tsukuba Research Plant.
October: The “Fujikin Space Environment Instruments Lecture” is established and conducted on behalf of the Department of Aerospace of the University of Osaka Prefecture.
November: Then President Shuhei Ogawa receives the Blue Ribbon Medal.
November: “Daruma Management, High-Tech Company: the Fujikin Story” is published.
1993January: We receive a top certification for the N-II Fittings, under a new certification system, following an amendment to the High Pressure Gas Control Law.
February: We are certified for the Compliance System under COCOM regulations.
1999Sophram ValveTM, a soft-diaphragm valve for use in biotechnology, is successfully developed.
2000March: Shu Nakamura earns a Ph.D., becoming the third employee to earn a doctorate.
Domestic share for valves used in semiconductor manufacturing reaches 70%, while global share is 30%.
1996April: We are recognized by the Japan Patent Office for using the industrial property system and for our contributions to regional economic development.
1998March: Kazuya Ikeda and Yasuyuki Shirai earned doctorates as Fujikin’s first social doctors.
May: In order to cater to advanced needs, our ultra super cleanroom is installed in the Osaka Kashiwara Enterprise.
May: To mark our 55th anniversary, we publish the first edition of “The Zen,” an external PR magazine that seeks to explore exchanges around the theme of “ultra and the extreme” that has pioneered the 21st century.
July: We are commissioned to serve as a director of Japan Technomart and as a certified member of the Japan Technomart Foundation.
1988January: The Osaka High-Tech Research & Creative Development Center is completed. Fujikin Soft’s Osaka Technoport Create Center starts operation.
September: An office in San Jose, in America’s Silicon Valley, is opened.
July: The Fujikin pension fund is inaugurated.
October: We receive a commendation （for a superior production facility） from the Minister of Trade and Industry at the 28th High-Pressure Gas Safety Conference.
1997July: We receive a letter of appreciation from the University of Osaka for our cooperation in their installation of an ultra cleanroom.
November: Then President Shuhei Ogawa, in his role as director of the International Business Organization of Osaka, receives a certificate of gratitude from the Governor of Osaka for his efforts toward the industrial development of Osaka Prefecture.
November: We receive a letter of commendation from the Minister of Labor for our efforts in promoting technical skills.
December: The late former Chairperson Toshi Kojima is conferred the Sixth Rank.
October: The Osaka Plant acquires international IS09001 certification for quality.
September: We publish “Beyond the Flow of Things,” a technical knowledge magazine to mark the 70 years since our founding.
2001February: Keihin Chuo Branch opens.
April: Then Vice President Hiroshi Ogawa is awarded the Medal with Yellow Ribbon.
July: We are a participant in the 2001 Internet Exhibition.
February: Dr. Pettit, dean of Georgia State University in the U.S., visits our company to learn about advanced R&D.
April: We are recognized by the Small and Medium Enterprise Agency for having a rationalized model plant for a small or medium-sized enterprise.
June: Osaka Kashiwara Enterprise is completed.
September: The company’s name is changed to Fujikin Inc.
The award ceremony takes place for the 1981 Judai Award for New Products.
A TV commercial
1983February: PhenixTM is given the Grand Prize at the 8th
Annual Invention Awards.
September: PhenixTM a fine ceramic value, receives the 1983 Chemical Plant Show Excellent Product Award.
15
History Process & Instrumentation Valve Equipment for Oil & Gas.
February: In order to increase production in Vietnam, we move into a new factory that has five times more floor space than the previous facility.
September: We receive the Special Award in the Business Category at the Japan New Business Awards.
March: We receive the 3rd
Manufacturers Awards, Part Category Prize: Machinery Component Award (from Nihon Kogyo Shimbun).
April: We are selected as one of the Top 300 Notable Small and Medium Enterprises.
May: Our first employee to study overseas, Kensuke Kojima, receives a bachelors degree with a major in finance from Boston University (and he earns an MBA in September 2007).
2006
2008March: We receive the Technology Award from the Japan Society of Chemical Engineers.
April: Our sturgeon are exhibited at “Samehaku 2010” at the Osaka Aquarium Kaiyukan.
April: Our “New Headquarters” opens in the Akihabara district of Tokyo, an urban information hub for government, academia and business.
May: We take part in the Osaka Pavilion of the Shanghai Expo as a special sponsor and participant to mark our 80th anniversary.
July: The Chief Priest of Kiyomizu-dera, Seihan Mori, is invited to take part as a guest in the 57th edition of “Super Talk,” which appears in THE ZEN. The magazine is published as a special edition to express gratitude for our 80 years in business.
July: Online retailing site is launched.
July: TKSCT, a South Korean manufacturer of valves and joints, is acquired.
2007February: We receive the Promotion of Machinery Chairman’s Award, New Machine Promotion Prize.
October: We receive the Manufacturers Awards, Parts Grand Prize and Environment Award (from the Nihon Kogyo Shimbun, Monozukuri, Nippon.)
2010February: The Japan Society of Mechanical Engineers awards us the Chairman’s Award for Excellent Energy Saving Equipment for “KongokunTM” and “BunsankunTM”.
April: President and CEO Hiroshi Ogawa is made Chairman and CEO, and Managing Director Shinya Nojima becomes President and COO.
October: We receive the Manufacturers Awards, Parts Grand Prize and Machinery Award (from Nihon Kogyo Shimbun, Monozukuri, Nippon.)
May: The Chief Priest of Kiyomizu-dera, Seihan Mori, kindly creates calligraphy of the character “so” to mark our 80th anniversary. In addition, we commission the creation of gourds and ornaments from Shimizu Daisuke, believed to be the progenitor of ceramic manufacturing.
March: We receive the Technology Award from the Fluid and Particle Processing Division of the Japan Society of Chemical Engineers.
We receive the 4th Manufacturers Awards, Part Category Prize: Incentive Award (from the Nihon Kogyo Shimbun).
Employee Toru Hirai earns a doctorate degree.
June: We receive a letter of appreciation for our contributions to the development of the H-II rocket, in particular for the implementation of launch service.
November: Fujikin Tsukuba Research Plant receives a commendation from Ibaraki Prefecture for being an excellent manufacturing facility.
July: We receive a commendation from the Russian Association of Fisheries, Managers and Exporters for our sturgeon operations.
2009April: The Japan Society of Mechanical Engineers award us with the Excellent Product Prize for “KongokunTM” and “BunsankunTM”.
2002March: Masafumi Kitano, Masaaki Nagase and Kaoru Hirata earn doctorate degrees.
September: Fujikin Tsukuba Research Plant acquires IS014001, an international environmental certification. The Vietnam Plant is founded in Hanoi to serve as a manufacturing base for Asia.
October: The China Service Center is established.
2004March: We receive the 1st Manufacturers Awards: Part Category Prize: Incentive Award (from the Nihon Kogyo Shimbun).
Fujikin Soft receives the Grand Prize at the 5th Annual IT Management Competition (Nihon Kogyo Shimbun).
2003June: We receive a letter of appreciation from the Association for International Manpower Development of Medium and Small Enterprises, Japan, for our training of students overseas.
June: The Korea Service Center is established.
July: The Tohoku Service Plant (now called the Tohoku Plant) is established.
Akihabara Chuo General, Koshin Central Office and Yamanashi Service Center are established.
October: Chairman Hiroshi Ogawa is presented the Person of Merit Commendation from the Minister of International Trade and Industry for High-Pressure Gas Safety.
September: Upon the sudden passing of former company President Shuhei Ogawa, Hisae Ogawa is made Chairman, and Vice President Hiroshi Ogawa becomes President.
The Taiwan Service Center is established.
Atsushi Hidaka becomes the latest employee to receive a doctorate degree.
We receive the 2nd Manufacturers Awards, Part Category Prize, Incentive Award, and the Higashi Osaka Manufacturing Grand Gold Prize.
August: We move into Saito Bio Incubator and Creation Core Higashi Osaka.
2005March: We participate in and give support to the Seto People’s Pavilion at the Aichi Expo.
August: We receive the 1stMonozukuri (Manufacturing) Nippon Grand Awards: Excellence Prize from the Prime Minister of Japan.
16
History Process & Instrumentation Valve Equipment for Oil & Gas.
2014February: We are recognized by the Ministry of Economy, Trade and Industry as an “IT Management Implementation Company”.
2015January: Fujikin Carp Group medical devices adopted by the Ministry of Defense.
February: Japan External Trade Organization (JETRO) Chairman Hiroyuki Ishige is the featured “Super Talk” guest in the 63rd edition of THE ZEN. The magazine is a special edition published to recognize our 85th year in business.
February: Tsukuba Research Plant receives certification according to the OHSAS18001 international labor standards.
February: We receive Rostechnadzor (RTN) certification from Russia authorizing installation of technical equipment.
April: Kyoto University President Hiroshi Matsumoto is the featured “Super Talk” guest in the 60th edition of THE ZEN. The magazine is a special edition published to commemorate reaching the milestone of having 60 editions published.
November: Eight hundred people attend the Koyasan University Shuhei Ogawa Memorial Lecture at Osaka City Central Public Hall.
2013
April: Fujikin Umekita Knowledge Center and Science [創] SO opens at Grand Front Osaka.
May: Life Science site goes public, marking our full-scale entry into the market.
November: Vol. 10 published as commemorative volume of “New Technomart SO”.
June: Information Security Management System ISO27001 certification acquired.
October: We receive the MONODZUKURI Awards, Parts Category Prize: Incentive Award (Nihon Kogyo Shimbun / Monodzukuri Nippon Conference).
November: Koyasan University and Fujikin Shuhei Ogawa Memorial Lecture held at Osaka City Central Public Hall.
March: We are awarded a spot amongst the "Global Niche Top 100 Companies" recognized by the Ministry of Economy, Trade and Industry.
August: Umekita SOUAN opens in Grand Front Osaka.
August: “Koyasan University and Fujikin Shuhei Ogawa Memorial Lecture in Umekita” held in Umekita.
June: Construction begins on a new production facility in Vietnam (Bắc Ninh).
May: Kongōbu-ji Temple Abbot and Sumpreme Archbishop of Koyasan Shingon-shu, His Holiness Yukei Matsunaga is the featured “Super Talk” guest in the 62nd edition of THE ZEN. The magazine is a special edition published in recognition of our 85th year in business.
October: We receive the MONODZUKURI Awards, Parts Category Prize: Electrical and Electronic Component Award (Nihon Kogyo Shimbun / Monodzukuri Nippon Conference)
October: Administrative Vice-Minister of Defense Masanori Nishi is the featured “Super Talk” guest in the 61st edition of THE ZEN. The magazine is a special edition published to recognize in advance our 85th year in business.
October: Koyasan University and Fujikin Shuhei Ogawa Memorial Lecture held at Osaka City Central Public Hall.
February: “New Technomart SO” remade into an informational magazine focused on intellectual and human capital strategies.
2011April: Gallery [創] SOU opens on the 4th floor of the Osaka Fukoku Seimei Building, as part of our efforts to forge links between the people of Osaka, Osaka University and the government, academia and industry.
August: Fujikin Singapore is established.
October: We receive the Manufacturers Awards, Part Category Prize: Machinery Component Award (from the Nihon Kogyo Shimbun, Monozukuri, Nippon.)
April: With the aim of invigorating intellectual property, we publish a preliminary issue of “New Technomart SO,” an information-based magazine about intellectual property strategies.
September: A special lecture event is held at the Hotel Grandvia Osaka to mark our 80th + 1 year anniversary.
July: Junichiro Kawaguchi, an official responsible for the planning of JAXA’s Hayabusa spacecraft, is invited to take part as a guest in the 58th edition of “Super Talk,” which appears in THE ZEN. The magazine is published as a special edition to express gratitude for our 80 years in business.
October: Our second employee to study overseas, Masafumi Kitano, attends Stanford University.
October: Fujikin Tsukuba Research Plant receives a commendation for a business site from the Ibaraki Labor Standards Association.
November: We receive the Shared Prize and Special Prize for Manufacturing (from the Nihon Kogyo Shimbun, Monozukuri, Nippon.)
November: We receive the Manufacturers Awards, Part Category Prize, Incentive Award (from the Nihon Kogyo Shimbun,Monozukuri, Nippon.)
May: President Shinya Nojima delivers a special lecture at the Osaka Institute of Technology.
November: We receive the MONODZUKURI Awards, Parts Category Prize: Machinery Component Award (Nihon Kogyo Shimbun / Monodzukuri Nippon Conference).
April: We receive certification as an American Society of Mechanical Engineers stampholder.
*TKSCT Corporation
A special lecture event is held at the Akihabara Dai Building to mark our 80th anniversary.
August: Issued first issue “New Technomart SO”. 2012
April: Osaka University President Toshio Hirano is the featured “Super Talk” guest in the 59th edition of THE ZEN. The magazine is a special edition published in recognition of our 80th + 1 year in business.
September: We receive the Economy, Trade and Industry Minister's Award presented by the Prime Minister of Japan at the 5th MONODZUKURI (Manufacturing) Nippon Grand Awards.
Prime Minister Shinzo Abe was also in attendance at the gala dinner.
17
Certifications & Awards Process & Instrumentation Valve Equipment for Oil & Gas.
ISO14001Certificate
Tsukuba Advanced Technology Center
OHSAS18001Certificate
Tsukuba Advanced Technology Center
ISO 9001 / 14001Certificate(Vietnam Plant)
OHASAS 18001 Certificate
(TK-FUJIKIN CORPORATION)
Plant certified for high-pressure gas safety by METI(Ministry of Economics,Trade and Industry)
(Osaka Plant)
Plant certified by Japaneseassociation for Marine survey,
inspection, and analysis
EU ConformityCertificationCE Marking
ISO9001Certificate
(Osaka Plant Higashiosaka)
ASME-NPTCertificate
(TK-FUJIKIN CORPORATION)
Royal Dutch ShellVendor Approval
in SQS
Royal Dutch ShellVendor Approval
in SQS
Company name:
Company ID: 100127Subscription to SQS - Stage 2
RTN PermissionRussian Federation Regulatory
Agency of Environment,Technology and Nuclear Power
( ) ( )
18
Certifications & Awards Process & Instrumentation Valve Equipment for Oil & Gas.
The 1st MonodzukuriNippon Grand Awards
Excellence Prize(2005)
Association of fisheryproduction and
export President(Russia)
ASME BPESubcommittee
Vaaler Award(1984)
RoHSCompliance
etc.
Top 300 NotableSmall and Medium
Enterprises(2006)
Technology Awardform Japan ChemicalIndustry Association
Outstanding PerformanceProduct Award fromThe Japan Society ofMechanical Engineers
Blue RibbonMedal
Yellow RibbonMedal
Type certification by Nippon Kaiji Kyokai
(ClassNK)
Fourth Order ofthe SacredTreasure
19
PROFILE Process & Instrumentation Valve Equipment for Oil & Gas.
The establishment of a solid business foundation enhances the use of 21st century technology.In the present severe business environment, has continued with positive and solid management. will challenge the future and continue to grow with the rest of the
● Corporate Name: Fujikin Incorporated● Foundation: May 1930● Incorporation: September 1954● Sales: 49.1 billion yen
(group total, as of March 31, 2015)● Assets: 16.1 billion yen (as of March 31,
2015, non-consolidated)
33.9 billion yen (as of March 31,
2015, consolidated)● Capital: 5.4 billion yen
(group total as of March 31, 2015)● Employees: 2,600
(group total as of March 31, 2015)● Average Age: 33.77 years● Head Office: 2-3-2 Itachibori, Nishi-ku, Osaka
550-0012, Japan
Tel. +81-6-6532-5601● Corporate Headquarters: Kita Hankyu Bldg., 1-4-8 Shibata,
Kita-ku, Osaka 530-0012, Japan
Tel. +81-6-6372-7141● New Headquarters
Akihabara Chuo Central: Akihabara Dai Bldg., 1-18-13
Sotokanda, Chiyoda-ku, Tokyo
101-0021, Japan Tel: +81-3-3252-0301● Home Office: 20-1 Kamitobawaranden, Minami-ku,
Kyoto 601-8133, Japan
Tel. +81-75-661-6791
● Accounts (Osaka Area) Development Bank of Japan, Kansai
Branch
Mizuho Bank, Ltd., Nishinoda Branch
Shoko Chukin Bank, Osaka Branch
Bank of Tokyo-Mitsubishi UFJ, Umeda
Branch
Joyo Bank, Osaka Branch
● Accounts (Tokyo Area) Mizuho Bank, Ltd., Yaesuguchi Branch
Bank of Tokyo-Mitsubishi UFJ, Yaesu-dori
Branch
Bank of Tokyo-Mitsubishi UFJ,
Nihonbashichuo Branch
● International Accounts Mizuho Bank, Ltd.
Fleet Bank
Bank of Ireland
● Chairman & CEO Hiroshi Ogawa
● President & COO Shinya Nojima
● Senior Managing Director Michio Yamaji Tetsuro Miyatani Hisashi Tanaka
● Senior Corporate Director Kazuya Ikeda Tsuneo Yoshida Hiroshi Ueda
● Corporate Director Hideyuki Miyagawa
● Standing Corporate Auditor Takao Kan
● Corporate Auditor Kouji Kanao
● Deputy Corporate Director Kazuo Akiyama Toshiki Kanai Michio Kuramochi Shuichi Kuriyama
● Senior Executive Corporate Officer Naoki Akamatsu Kazuyoshi Mihashi Masami Maeda
● Senior Operating Officer Mikio Inoue
● Operating Officer Osamu Fukata Masahiro Nakamura Nagami Kobayashi Shigeaki Tanaka Motohide Matsunaga Toshihiko Nakatani Yoshinori Shimomura Kunihiko Daido Eiichi Kitagawa Koji Nishino Kunio Ueda Akio Kawabata Katsuya Fujita Tsutomu Shinohara Masato Takahashi Yoshiaki Ohtomo Shuichi Shibata● Supreme Advisor Tetsuya Kojima● Honorary Advisor Hideo Miyahara (President Emeritus of Osaka University)
Fujikin Soft Co., Ltd.
All Japan Fuji Metal Communities
Organization
Fuji Kyosoukai Association.
Fujikin of America Inc.
Carten-Fujikin Incorporated
Carten Controls Ltd.
Fujikin Deutschland GmbH
Fujikin of China Incorporated（富士金閥門（上海）有限公司）
Falcon Incorporated（日美隼包装机械科技（上海）有限公司）
Fujikin Taiwan Incorporated（台灣富士金閥門股份有限公司）
TK-FUJIKIN CORPORATION
Vina World Link Co., Ltd.
Fujikin Vietnam Co., Ltd.(Cong Ty Fujikin Vietnam)
FUJIKIN BAC NINH INCORPORATED
Fujikin Singapore Pte.Ltd.
Company Outline Affiliated Companies
Subsidiaries
PROFILE Process & Instrumentation Valve Equipment for Oil & Gas.
USAThe USA Vaaler Award(1984)
Awarded by the Director General of Small and Medium CompaniesCommendation for Cooperative Activity Services（All Japan Fuji Metal Communities Organization）Received for successful management of small and medium companies (January 1996).
Received for efforts in the enhancement of small and medium company organization (May 2001).
2014 IT Management Awards(February.2014)
Ministry of Economy Trade and Industry Named by Minister of Economy Trade and Industry as one of 300 Vigorous Monodzukuri Small and Medium-sized Enterprises that Support the Japan of Tomorrow (2006).
Awarded by the Minister of International Trade and Industry (Prevention of High-pressure Gas Disaster) Received by Shuhei Ogawa for his many years of contribution to the prevention of high-pressure gas disaster. (October 1986).
Awarded by the Director General of Patents Commendation for Union Services (All Japan Fuji Metal Communities Organization)Fujikin Incorporated,For effective utilization of patent rights. (January 1996)
Awarded by the Minister of LaborFor efforts in promotion of technical ability (November 1997).
Awarded by the Prime Minister of JapanThe 1st Monodzukuri Nippon Grand Awards: Excellence Prize (August 2005).
Japan Chemical Industry AssociationChemical Plant Show: Excellence Award(1983).The Technical Award(2007).
The Japan Society of Mechanical EngineersThe Award of Excellence(2008).
Japan Society for the Promotion of Machine Industry The New Machine Promotion Awards for Chairman’s Award (2007).
The Japan Machinery FederationCommendation for Outstanding Energy Saving Parts and Components for Chairman’s Award(2009).
Nikkan Kogyo ShimbunGrand Prize for IT Management in Japan, Nikkan Kogyo Shimbun Award(2004).
Higashi Osaka Chamber of Commerce and IndustryHigashi Osaka Monodzukuri Grand Prize Golden Prize(2005).
Japan New Business Conferences1st Grand Prize for Japan New Business Creation Special Prize (2006).
Judai New Product Award(1982)1st Monodzukuri Grand Award for Parts Parts Award(2004)2nd Monodzukuri Grand Award for Parts Incentive Award(2005)3rd Monodzukuri Grand Award for Parts Machinery Award(2006)4th Monodzukuri Grand Award for Parts Incentive Award (2007)5th Cho Monodzukuri Award for Parts Award for Parts Related to the Environment(2008)
● 2005 Received the 1st Group Cooperation Award
● 2006 Received the 2nd Group Cooperation Award
● 2007 Received the 3rd Group Cooperation Award
● 2009 Received the 5th Group Cooperation Award
● 2011 Received the 7th Group Cooperation Award
● 2012 Received the 8th Group Cooperation Award
From the High Pressure Gas Safety Institute of Japan
Awarded by the Director General of the Science and Technology AgencyNational Commendation for the Promotion of Science and Technology, 1st awards ceremonyReceived by then-Chairperson Toshi Kojima for her many years of contribution to society through corporate achievement (October 1981).
Designated as a streamlined model factory for a small and medium-sized enterprise (April 1982).
Commendation for Achievements in Research, 9th awards ceremonyReceived by Yoshiteru Sonoda at the Technical Development Center for his research into the ceramic flow-control valve (April 1983).
Winner of the 17th (corporate) Small and Medium-sized Enterprise Award（January 1984）.
Commendation for Originality and Creativity, 27th awards ceremony Received by Atsuo Hashimoto from the Production Division for his improvement on the process operation of cryogenic flow-control equipment (April 1986).
Commendation for the Promotion of Science and Technology, 7th awards ceremonyReceived by President Hiroshi Ogawa (then Managing Director) for his contribution to the development of electronic flow-control system equipment (April 1987).
Commendation for the Promotion of Science and Technology, 10th awards ceremony Received by then-President Shuhei Ogawa for his contribution to the development of small valves for nuclear power plant facilities (April 1990).
Commendation for Originality and Creativity, 41st awards ceremony Received by Takashi Onishi at the Osaka Plant for his improvements to the L-type joint process jig (April 2000).
Minister of International Trade and Industry Award for Manufacturing Facility High-pressure Gas Safety ExcellenceOsaka Plant recognized as a manufacturing facility with excellent high-pressure gas safety.(October 1991)
Minister of Economy, Trade and Industry Award for Distinguished Individual Contribution to High-pressure Gas SafetyPresident Hiroshi Ogawa recognized for his distinguished contributions in the area of high-pressure gas safety. (October 2005)
Minister of Economy, Trade and Industry Award for Manufacturing Supervision Excellence in High-pressure Gas SafetySusumu Mikami of the Osaka Plant.(October 2011)
Nikkan Kogyo Shimbun
GLOBAL NICHE TOP 100 (May. 2014).
The 5th Monodzukuri Nippon Grand Awards: Overseas deployment section, Award of Excellence Ministry of Economy,Trade and Industry（September 2013）.
The Fourth Order of the Sacred Treasure
Received by then-Chairperson Toshi Kojima for her lifetime contribution to the scientific and technological industries (November 1986).
The Blue Ribbon Metal
Received by then-President Shuhei Ogawa for his lifetime contribution to the development of the valve industry (November 1992).
The Yellow Ribbon Metal
Received by Representative Director & Chairman President Hiroshi Ogawa for his contributions to society and to the Japanese economy through the development of electronic flow-control system equipment (April 2001).
6th Cho Monodzukuri Award for Parts Machinery Award(2009)7th Cho Monodzukuri Award for Parts Machinery Award(2010)8th Cho Monodzukuri Award for Parts Incentive Award (2011)6th Monodzukuri Associated Grand Award Special Award(2011)9th Cho Monodzukuri Award for Parts Machinery Award(2012)10th Cho Monodzukuri Award for Electricity Electron Section Award(2013）11th Cho Monodzukuri Award for Parts Incentive Award (2014）12th Cho Monodzukuri Award for Parts Incentive Award (2015）
Awards
20
PROFILE Process & Instrumentation Valve Equipment for Oil & Gas.
● Passed the Electrical Machinery and Apparatus with Explosion-proof Structure Examination
● Vice Chairman’s Company of the Osaka Prefecture High-Pressure Gas Safety Association
● Auditing Company of the West Japan Area Minister Certification Examination Takers Conference
● Permanent Assembly Members Company of Osaka Prefecture Central Meeting for Small and Medium Companies
● Participating Company in the Osaka Science and Technology Center
● Permanent Assembly Members Company of the Higashiosaka Chamber of Commerce and Industry Board Company
● Permanent Member Company of the Higashi Osaka Employees’ Association
● Company for the Osaka Community Foundation and Fujikin Kojima-Ogawa Science Education Promotion Fund
● Auditing Company of the Semiconductor Equipment Association of Japan
● Directors Company of the Japan Valve Manufacturers’ Association
● Japan-China Economic Association● Japan New Business Conference● Association for Rational Administration
(Osaka) Inc. ● The New Business Conference Kansai● Manufacturing and Technology Promotion
Association● Japan Cross-industry Cooperation
Association ● All Japan Fuji Metal Communities
Organization● Founding Company of Koyasan University
Fujikin Shuhei Ogawa Memorial Lecture● Directors Company of the NPO Higashi
Osaka Regional Vitalization Support Institution● Committee Company of Osaka-Tetsusyou
Health Insurance Society * The minister of Economy, Trade and Industry
was formerly the Minister of Trade and Industry● Representative Officer Company of the
Kashiwara-Habikino Industrial Complex Association
● Ministry of Defense Osaka
ISO9001 certified plants
Applicable scope: Osaka Plant Higashi Osaka
ISO14001 certified plants
Applicable scope: Tsukuba Advanced Technology Center
European safety standard Conforms with CE standards
Stamp Holder Certifications of theAmerican Society of Mechanical Engineers (ASME)●ASME-N Nuclear power vessels, pumps, piping systems for nuclear equipment
●ASME-NPT Components for use in nuclear power (parts for valve parts, etc.)
OHSAS18001Certified PlantApplicable scope: Tsukuba Advanced Technology Center
Applicable scope: TK-FUJIKIN CORPORATION
1.The development,operation and maintenance of software2.The selling of medical device for telemedicine software3.The design and manufacturing of calendar
Applicable scope: Vietnam Plant
Applicable scope: FUJIKIN BAC NINH INC.
ISO9001/14001 certified plants
ISO9001 certified plants
FUJIKIN SOFT.CO.LTDHead OfficeFUJIKIN UMEKITAKNOWLEDGE CENTER
OHSAS18001 Plant with Labor Safety Hygiene Management System Certification(TK-FUJIKIN CORPORATION)
IS027001
IS612541/ ISO27001
Plant designated as a model of efficiency by the small and Medium Enterprise Agency
Plant designated as a government - supported R&D factory for key technology by the Agency of Industrial Science and Technology under the Ministry of International Trade and Industry Agency
Applicable product:
Type certification by Nippon Kaiji Kyokai (ClassNK)
Applicable product:Low-temperature valve
Certification by the Eurasian Economic Community and under the jurisdiction of the service organizations certified by the Russian Federation
Type certification by GL (Germanischer Lloyd classification society)
Applicable product: Low-temperature valve
Design and manufacturing certification by ABS(American Bureau of Shipping)
Target： Primarily ship-relatedproduct： fittings（TK-FUJIKIN CORPORATION）
Certification by EIL (India's certifying body)
Target： Primarily oil and gasproduct： fittings, instrumentation valves, piping (manifold valves)
（TK-FUJIKIN CORPORATION）
글로벌 강소기업 육성사업 참여증서Certification by (GLOBAL strength, Small & Medium Business Administration)
（TK-FUJIKIN CORPORATION）
KEPIC (Korea Electric Power Industry Code)-MN certified (TK-FUJIKIN CORPORATION)
Applicable product:
Certification of compliance with ASTM F1387 standards
Applicable product:
Certification of compatibility with Swagelok Company
Acquisition of Russian TRCU(Technical Regulation Customs Union Declaration of Conformity)
Sale and leasing approval forspecially controlled medical devices
Type certification by Nippon Kaiji Kyokai (ClassNK)
Qualifications and Authorizations● High-pressure gas plant recognized by Minister of Economy,
Trade and Industry. ● Company recognized by Minister of Economy, Trade and
Industry compliance program. ● Practical technical proficiency testing plant recognized by
Minister of Health Labor and Welfare. ● Designated as a streamlined model factory for a small and
medium-sized enterprise.● Plant certification by Nippon Kaiji Kyokai (ClassNK)
21
PROFILE Process & Instrumentation Valve Equipment for Oil & Gas.
D.Eng.: Kotohiko Sekoguchi, Kazuya Ikeda, Masafumi Kitano, Masaaki Nagase, Kaoru Hirata, Atsushi Hidaka, Toru Hirai, Kiyotaka Hayakawa, Satoru Yamashita Michio Yamaji Masayoshi KawashimaDoctorate of Science: Mikio InoueDoctorate of Pharmacology:
Toshihiro HiraoProfessional Engineer: Kiyoshi Hiraoka(Fisheries)MBA: Tadashi Uwai, Ryuichi Masuda, Kensuke KojimaSmall &Medium EnterpriseManagement Consultant: Shinya Nojima Kenji Oi Labor and Social Security Attorney Akira ItohPatent Attorney Hidenobu Sato
Qualifications, etc.
Grant for patent application of an outstanding invention for the development of the long life QS Valve (with patents granted in seven countries)
1965
Grant for research and development of automated production facilities
1972
Grant for technological improvement costs
1973
Grant for research into the realization of inventions
1974
Grant for overseas patent applications, and grant for research and development of new technologies and products
1975
Grant from Osaka Prefecture for research in new technology and product development
1979
Grants for technological improvements from the Small and Medium Enterprise Agency
19851988
Grant from the Kinki Bureau of International Trade and Industry for technological improvement
1992
Grant from the Ministry of International Trade and Industry for the development of knowledge-integrated businesses
1992
Grant under the Facilitation Act for advancement of new fields, etc. from the Small and Medium Enterprise Agency
1995
From the Small and Medium Enterprise Agency of Osaka Prefecture for the cooperative development of applied technology by local industry, academia and the government
19961997
From the Japan Science and Technology Agency for activities to foster creative research results
1998
From the New Energy and Industrial Technology Development Organization (NEDO) for research and development of local consortium
1998 1999 2000
Grant from the Small and Medium Enterprise Agency for advancement of new fields, etc.
1999
The research item “optimal control by fuzzy control”
19992000
Research and development programs for new technologies for promotion activities of innovative technologies in response to new technology issues
19992000
F/S new technology research survey business (commissioning business) for the Japan Small and Medium Enterprise Corporation
2001
R&D new technology research survey business (commissioning business) for the Japan Small and Medium Enterprise Corporation
2002 2003
Commissioning duties related to basic technological development for the safe use of hydrogen, etc.
2003
Project (a consortium) to reinforce strategic and basic technologies
2003
Research item: “Experimental study on development of low-energy consumption backlights and energy-saving manufacturing technologies.”
2004
Research and development project for a regional regeneration consortium of the Ministry of Economy, Trade and Industry
2005
Grant (as part of assistance for al development, etc.) to support the development of manufacturing
2009
Development assistance for development costs for the practical application of innovations and for the application of industrial technologies
2010
Grant for important projects with emphasis on Active Osaka Promotion Fund (Development assistance projects such as hydrogen infrastructure)
201120122013
Assistance for the practical application of venture company
2013
Grant as part of assistance for trial development, etc to support the Small and Medium Enterprise Agency, Small companies manufacturing.
20132014
Innovation Commercialization Venture Support Project
2014
Assistance to create high levels of strategic and basic technologies
2011
Grants for being an enterprise that conducts research and development of key national technologies
19811982
Grant from Osaka Prefecture for research in new technology and product development
1989
Achievements in support and training in economics (commerce) and industry grants
Grant from Osaka Prefecture for research in new technology and product development
1993
Energy and Industrial Technology Development Organizatio(NEDO) for a project to elicit proposals from the general public for new industry creation
1998
22
