+ All Categories
Home > Documents > Processing Room Blast gunrange of abrasive selection so that it is suitable for trial tests or...

Processing Room Blast gunrange of abrasive selection so that it is suitable for trial tests or...

Date post: 08-Aug-2021
Category:
Upload: others
View: 3 times
Download: 0 times
Share this document with a friend
2
Product Brochure Jr. Type II is a compact wet blasting equipment for research and development. A wide gun developed by unique technology in 1-axis drive enables uniform processing. Various surfaces can be created with a large range of abrasive selection so that it is suitable for trial tests or setting conditions. Automatic Type Blast Gun 160mm X Axis Gun Driving Compact Wet Blasting Cell Jr. Type II Processing Room Blast gun Concept & Features 1. Compact Size - Suitable for Lab use (850×920×1450mm) 2. Enables to uniform processing by 1-axis drive 3. Able to create any surface with various kind of abrasive selection. 4. Excellent test environment (Almost no dust) Compact / Versatility Wet Blasting Equipment for testing.
Transcript
Page 1: Processing Room Blast gunrange of abrasive selection so that it is suitable for trial tests or setting conditions. Blast Gun 160mm X Axis Gun Driving Automatic Type Compact Wet Blasting

Product Brochure

Jr. Type II is a compact wet blasting equipment for research and development. A wide gun developed by unique technology in 1-axis drive enables uniform processing. Various surfaces can be created with a large range of abrasive selection so that it is suitable for trial tests or setting conditions.

Automatic TypeBlast Gun 160mm X Axis Gun Driving

C o m p a c t W e t B l a s t i n g C e l l

Jr. Type II

Processing Room

Blast gun

Concept & Features

1. Compact Size - Suitable for Lab use(850×920×1450mm)

2. Enables to uniform processing by 1-axis drive

3. Able to create any surface with various kind of abrasive selection.

4. Excellent test environment (Almost no dust)

Compact / VersatilityWet Blasting Equipment for testing.

Page 2: Processing Room Blast gunrange of abrasive selection so that it is suitable for trial tests or setting conditions. Blast Gun 160mm X Axis Gun Driving Automatic Type Compact Wet Blasting

Product Brochure

525 Kanawa, Isurugi-machi, Nagaoka City, Niigata 940-2032 JAPAN TEL +81-258-47-1729 FAX +81-258-21-4124 URL www.macoho.co.jpMACOHO Co., Ltd.

Jr. Type II

General View

Specifications

compact Wet B last ing Cel l

Dimensions

Blast Gun

Table Size

Gun Drive Type

Gun Drive Speed

Gun Drive Range

Air Pressure

Power Supply

Power Consumption

Power Capacity

Air Supply Pressure

Air Consumption

850[W]×920[D]×1450[H]mm

Wide Gun 1×160mm [Selectable for your application. Available gun: wide gun, max. 1 × 160mm 1pc]

420[W]×300[D]mm

1-axis horizontal slide

1-200m/sec

300mm

0.1-0.4MPa [The setting range varies according to the mounted gun.]

AC200V, 50/60Hz, 3 phases

Approx. 2.6kW [Total rated apparent power of all the equipments]

5.2kVA [Excl. incoming current]

0.5MPa-0.7MPa

2.0m3/min[NTP] and below [The consumption varies according to the mounted gun and the setting of air pressure.]

Water Supply Port 10A

Compressed Air Supply Port 20A

Feed Port G3/4

850920Tower light, Buzzer

Wide Gun 1*160

300Stroke

Control panel

Circuit Breaker

Measuring cylinder for concentration measurement

Slurry outlet for concentration measurement

1450 16

40

Emergency Stop

Operation Panel

MACOHO Sales [email protected]

Please see the product pages of our web site for further information.

www.macoho.co.jpB1030-03-1705 Copyright© 2017 MACOHO Co., Ltd. All Rights Reserved.

The specifications are subject to change without notice. The actual product might be deferent from the drawings/pictures in this brochure. The specifications in this brochure are as of January, 2017. * Extreme caution is taken to create the brochure, however the company is not responsible for any losses that may occur through typographical errors.


Recommended