15
Product range
Product range
your projects,our passion
IndexUniQa 3/4/5000 Spreaders 3
One 2500/3500 Spreaders 5
Syrob Roadway Debris Collector 12
SD Salt Brine Production Station 13
CL De-Icing Spreaders 7
Airport De-Icing Spreaders 9
Solid capacity(water level, m3)
Solution capacity(lt)
UniQa 3000(UH, UK, UP)
from 4.0 to 7.0 2,270
UniQa 4000(UH, UK, UP)
from 5.0 to 9.02,600 (STD)
3,000 (XL)
UniQa 5000(UH)
from 7.0 to 16.0 3,700
Feeding systems
The feeding system is realized by a wide steel chain
conveyor with cross-bars. The chain is guided by
toothed pinions that enables a constant traction
maintaining a correct translation synchrony,
without skidding.
Chain Rubber belt AugerUH UK UP
The feeding system is realized by a double layer
natural rubber belt with polyester and nylon core.
The traction roller that moves the rubber belt is
crowned to avoid side deviations and tired to
minimize skidding.
The feeding system is realized by an auger with
variable pitch turn that is designed to assure a
continuous feeding of the material and a linear
emptying of the hopper. The auger is finished
with a special paint treatment to provide lasting
protection against the corrosion.
6
Driving systems
Hydraulic Auxiliary engineA/ID A/D A/D*A3/K
Driven by vehicle hydraulic system complying the
European Standards EN15431.
Driven by air-cooled (A/D) or liquid-cooled Diesel
engine.
Working scheme
Grid
Feeding system (chain, rubber belt or auger)
PVC hopper folding cover
Lightening plate
Polyethylene water proof box for electronic power pack and proportional valves block
Disc with double stage to obtain a better homogenising of solid and liquid. Possibility of spraying 100% brine.
Transverse roller/breaker
Ladder
Polyethyleneconveyor
Spreaders
Spraying bar through pressure nozzles for the spraying of 100% of the brine.
Spraying barU12/N
Twin discs spreading disc to increase the salt and/or brine spreading width.
Twin discsM2
7
Fifth wheelA/W
Driven by fifth wheel
TWSA/R
Driven by
Truck Wheel System
Feeding systems
Chain Rubber belt Auger
Solid capacity(water level, m3)
Soliution capacity(lt)
One 2500(OH, OK, OP)
from 2.2 to 3.7 1,600
One 3500(OH, OK, OP)
from 3 to 5 2,200
The feeding system is realized by an AISI 304
stainless steel chain with cross-bars. The chain
is guided by toothed pinions that enables
a constant traction maintaining a correct
translation synchrony, without skidding.
OH OK OP
The feeding system is realized by a double layer
natural rubber belt with polyester and nylon core.
The traction roller that moves the rubber belt is
crowned to avoid side deviations and tired to
minimize skidding.
The feeding system is realized by an auger with
variable pitch turn. The bottom of the feeding
system is realized in AISI 304 Stainless Steel to
enable the passage of bigger lumps avoiding the
auger blockage.
8
Driving systems
Hydraulic Auxiliary engineA/ID A/D
Driven by vehicle hydraulic system complying the
European Standards EN15431.
Driven by air-cooled Diesel engine (A/D).
Working scheme
Grid
Feeding system(chain, rubber belt or auger)
PVC hopper folding cover
Ladder
Lightening plate
Polyethylene water proof boxfor electronic power pack and proportional valves block
Roller breaker
Spreading group(solid / liquid)
Polyethylene conveyor
Hydraulic motor
Disc with 6adjustable blades
9
Spreaders
Capacity(m3)
Length on the chassis (mm)
No. of tanks
Tank capacity(lt)
CL 8.37 8,000 3,700 4 2,000
CL 10.45 10,000 4,500 5 2,000
CL 12.53 12,000 5,300 6 2,000
CL 14.61 14,000 6,100 7 2,000
CL 10.37 10,000 3,700 4 2,500
CL 13.45 12,500 4,500 5 2,500
CL 15.53 15,000 5,300 6 2,500
CL 18.61 17,500 6,100 7 2,500
Spreading systemNine spraying sets (three on the right, three on the
left, and three in the center) consisting of twenty-
seven nozzles, which regulate the spraying therefore
reaching a max. width of 10.5 m (symmetrical/
asymmetrical spraying with steps of 3.5 m) .
10.5 m
3.5 m
3.5 m 3.5 m
3.5 m 3.5 m
up to 17.5 m
12
As option six spraying nozzles (three on the left side and three on the right one) enable to reach a max. width up to 17.5 m.
Additional nozzlesU9
Driving systems
Auxiliary engineA/DHydraulicA/ID
Driven by vehicle hydraulic system complying the
European Standards EN15431.
Driven by air-cooled Diesel engine (A/D).
Rear hood to protect the technical compartment
(all the valves, pump, electric / electronic
components and Diesel engine, when mounted).
The rear hood opens by means of gas cylinders
for easy access.
Rear hood
Inside breakwater
Chassis made of structural steel (option stainless steel AISI304)
Modular tanks in rotational recyclable polyethylene Manhole
for maintenance inside the tank
Technical compartment with metal protection hood
Working scheme
13
Spreaders
14
CLA-BD
De-icing spreader with disc technology with
closed arms up to 10.5 m spreading width, with
opened arms up to 24 or 30 m spreading width.
CLA-BU
De-icing spreader with nozzles technology with
closed arms up to 10.5 m spreading width, with
opened arms up to 24 or 30 m spreading width.
15
SLA-BD
Combi spreader (solid and liquid) with salt
spreader and de-icing disc technology.
Spreading with closed arms for solid from 4 to 24
m spreading width, for liquid up to 14 m.
Spreading with opened arms for liquid up to 24
m spreading width.
SLA-BU
Combi spreader (solid and liquid) with salt
spreader and de-icing nozzle technology.
Spreading with closed arms for solid from 4 to 24
m spreading width, for liquid up to 14 m.
Spreading with opened arms for liquid up to 24
m spreading width.
Airport equipment
The technical compartment is built-in the
vehicle chassis.
Patented spreading group with twin discs
reaching up to 24 m width spreading (de-
icing solid solution).
One unit, “four seasons”.
Thanks to the concept of modularity given by the “twist-
lock” chassis (Option), it is possible to replace the solid
spreader (mod. UniQa) with liquid tanks to increase the
autonomy of the liquid de-icing products, transforming the
vehicle from “solid-liquid” sprayer into “all liquid” sprayer
according to the weather conditions.
28 spraying nozzles reaching a max. width of
14 meters with closed arms.
Solid spreader UniQaTwist-Lock
Liquid tanks
16
Airport equipment
26
Syrob collector
NewSyrob collector
New solution for the patrol vehicles of the highways to collect
foreign objects on the asphalt with maximum safety for the
operators.
Main highlights
• Collector made by steel basket
• Speed collecting up to 60 km/h
• Reduced height of the basket to not limit the windscreen
visibility from the driver’s cabin.
• Movements driven with an electro-hydraulic unit by the cab
Dissolution station
27
Production (l/h)Pump flow
(l/min)
SD 20 2,000 330
SD 40 4,000 330
SD dissolution station
Designed for sodium chloride brine production
(NaCl).
Main highlights
• Max 26% dissolution percentage.
• Storage tank (option)
Salt loading in the hopper to reach the
maximum level and start the production.
general valve opened to inject clear water
with constant pressure and flow in the
lower part of the salt.
Level increasing till when reaches the
opening to pass in the brine tank.
Transfer from the tank to the external
storage tank.
Operational principles
1
2
3
1
2
3
NaCl hopperSolutionoutflow tank
Technicalcompartment
Injectionboom
Printed in April 2012
The technical data here mentioned and the picturesare indicative only and not binding.
graphic: estroverso - Saluzzo
Giletta SpA
Via A. De Gasperi, 1
12036 Revello
tel +39 0175 25 88 00
fax +39 0175 25 88 25
Arvel Industries Sarl
Z. A. Pérache
63114 Coudes
tél +33 (0) 4 73 96 92 22
fax +33 (0) 4 73 96 92 14
www.giletta.com
Rev.
01/
13
