PRODUCT CATALOG - taurusinctaurusinc.co.in/Yamato Scientific Catalog.pdf · Overview Advantages...

PRODUCT CATALOG

2012.indd 1 6/28/2012 1:59:04 PM

YAMATO SCIENTIFIC AMERICAwww.yamato-usa.com

Since 1889 Yamato Scientific has focused on providing the highest quality of advanced scientific and laboratory instruments available. As a trusted manufacturer of scientific instruments, research facilities, analytical instruments, industrial inspection devices, and medical equipment, Yamato actively progresses towards being a dependable global company.

We at Yamato Scientific America, are not just dedicated to providing the best quality in our equipment, but we are also committed to providing you with unprecedented customer service. With knowledgeable technicians, engineers, and sales representatives, you are not left with any unanswered questions.

All of our products come with a standard one year manufacturer’s warranty.

2012.indd 2 6/28/2012 1:59:04 PM

Table of Contents

Spray Dryer

Plasma Cleaner

Autostill

Freeze Dryer

Magnetic Stirrer

Overhead Stirrer

Shaker

Orbital Shaker

Incubator

Muffle Furnace

Benchtop Sterilizer

Sterilizers

Rotary Evaporators

Fume Hood

Ovens

3 - 6

7

8

9 - 10

11

12

13

14

15 - 16

17

18

19-20

21-22

23

24-30

Product Page

2012.indd 3 6/28/2012 1:59:04 PM

Overview

Advantages

Applications

Which model is best for your needs?

Yamato spray dryers have become increasingly popular due to their easy to use control panel, temperature accuracy, and drying effectiveness. The ADL, DL, and GB series models efficiently and reliably dry and transform liquid solution, suspension, or emulsion into a uniform, fine amorphous powder.

Processes samples as small as .5 g of solid matterSafe for heat-sensitive samples, such as food or medical productsNo risk of contamination Digital display of inlet/outlet temperature and drying air volume eases readabilityDetachable drying chamber, cyclone and product vesselFast and easy clean upUniversal power supply and multilingual touch screen controller

PharmaceuticalsFood and beverageCosmetics and fragrancesAdvanced ceramicsChemical and material scienceAgriculturalEnergy

Details

ADL - 311SA

GB - 210(CE)

DL - 410(CE)

Yamato’s ADL-311S does not require the liquid sample or solution to undergo any pre- or post-processes such as filtration, separation, or pulverization. The use of organic solvents is fully supported with the attachment of our GAS-410 organic solvent recovery unit. Small, expensive and/or heat sensitive samples can be dried quickly and efficiently with this easy to operate system.

Yamato’s GB-210 does not require the liquid sample or solution to undergo any pre- or post-processes such as filtration, separation, or pulverization. The use of organic solvents is fully supported with the attachment of our GAS-410 organic solvent recovery unit. The biggest difference between the GB and ADL is that the GB-210 can support two different glassware sets - one for spray drying and the other for granulation.

The DL-410 is a larger capacity spray dryer that also does not require the liquid sample or solution to undergo any pre or post-processes such as filtration, separation, or pulverization. The use of organic solvents is fully supported with the attachment of our GAS-410 organic solvent recovery unit. Small, expensive and/or heat sensitive samples can be dried quickly and efficiently with this easy to operate system.

SPRAY DRYERSADL - 311SA GB - 210(CE)DL - 410(CE)

ADL DLGB Higher water evaporation rateHigher inlet temperature

Can spray dry and granulateSmaller sample sizesQuick and easy to operate

ADL - 311S

3

2012.indd 4 6/28/2012 1:59:06 PM

Technical Specifications

MODEL ADL - 311 SA GB - 210(CE)Water Evaporation Rate Max. approx. 1,300 ml/h Max. approx. 1,300 ml/hTemperature Control Range 40˚C - 220˚C at inlet 40˚C - 220˚C at inletTemperature Control Accuracy ± 1°C at inlet ± 1°C at inletDry Air Flow Rate Max. 0.7 m³/min Max. 0.7 m³/minAir Spray Pressure Control Range 0 - 294 k Pa (0-3 kg/cm²) 0 - 294 k Pa (0-3 kg/cm²)Flow Rate for Sample Liquid Feed Pump Max. 26 ml/min Max. 26 ml/minTemperature Controller PID digital tempertaure controller PID digital tempertaure controllerTemperature Sensor K thermocouple K thermocoupleStainless Tube Heater 2.88 kW at 240V 2.88 kW at 240VSample Liquid Feeding Pump Quantitative peristaltic pump Quantitative peristaltic pump

Solvent Recovering CapabilityOrganic solvent recovery unit GAS-410 must be used

Organic solvent recovery unit GAS-410 must be used

Spray Line CleaningNozzle orifice cleaning (manual pulse-jet system)

Needle inside the nozzle to clean the mesh automatically

Safety DevicesSelf-diagnostic functions (e.g. temperature aberration); Sample feed reversal

Self-diagnostic functions (e.g. temperature aberration); Sample feed reversal

Air Spray Pressure Gauge Bourdon tube: 294k Pa (3 kg/cm²) Bourdon tube: 294k Pa (3 kg/cm²)

External Dimensions (W x D x H)602 x 591 x 1351 mm or 23.7 x 23.3 x 53.2 in

760 x 420 x 1350 mm or 30 x 16.5 x 53.2 in

Weight 125 kg or 275.6 lbs (including GF-300) 110 kg or 243 lbsPower Supply AC 200V - 240V, single-phase 18 A AC 200V - 240V, single-phase 18 ASample liquid tube Silicone tube - 2 pcs Silicone tube - 2 pcsSafety Cover Yes YesAir hose 1 pc 1 pcExhaust Duct 1 pc 1 pc

Required Accessories Mini Spray Attachment GF - 300 (Included) GF - 300 or GF - 200 Organic Solvent Recovery Unit GAS - 410 GAS - 410Inlet/outlet Temperature Recorder 212792 - factory installed 212792 - factory installedFine Powder Recovery Cyclone 212780 212780Viton/Tygon Feeding Tube W0180001 W0180001Nozzle 1A, 1, 2A, 2, 3 1A, 1, 2A, 2, 3

Compressed Air28 l/min or 3 kgf/cm²; not required when using GAS-410

28 l/min or 3 kgf/cm²; not required when using GAS-410

Type of GasN₂ gas (99.99% purity, medical grade) is required when using GAS-410

N₂ gas (99.99% purity, medical grade) is required when using GAS-410

Operational Requirements

Performance

Structure

Standard

Included Accessories

Optional Accessories

Nozzle Assembly No. Liquid Nozzle Air NozzleA 406B 1270A 508B 1270A 508B 1270A 711B 1270A 711B 1270

Nozzle Sizes by Diameter (μm)

1A

1

2A

2

3

C 1626

C 1626

C 1778

C 1778

C 1626

4

2012.indd 5 6/28/2012 1:59:06 PM


MODEL DL - 410(CE)Water Evaporation Rate Max. approx. 3,000 ml/hTemperature Control Range 40˚C - 300˚C at inletTemperature Control Accuracy ± 1°C at inletDry Air Flow Rate 0.31 - 1.2 m³/minAir Spray Pressure Control Range 0 - 600 k Pa (0-6.11 kg/cm²)Flow Rate for Sample Liquid Feed Pump Max. 80 ml/minTemperature Controller PID digital tempertaure controllerTemperature Sensor K thermocoupleStainless Tube Heater 2kW＋2kW at 240VSample Liquid Feeding Pump Quantitative peristaltic pump

Solvent Recovering CapabilityOrganic solvent recovery unit GAS-410 must be used

Spray Line CleaningNeedle inside the nozzle to clean the mesh automatically

Safety DevicesSelf-diagnostic functions (e.g. temperature aberration); Sample feed reversal

Air Spray Pressure Gauge Bourdon tube: 600k Pa (6.11 kg/cm²)

External Dimensions (W x D x H)1750 x 1060 x 880 mm or 69 x 42 x 35 in

Weight 180 kg or 397 lbsPower Supply AC 200V - 240V, single-phase 24 ASample liquid tube Silicone tube - 2 pcsSafety Cover YesAir hose 1 pcExhaust Duct 1 pc

Required Accessories Mini Spray Attachment N/AOrganic Solvent Recovery Unit GAS - 410Inlet/outlet Temperature Recorder 212792 - factory installedFine Powder Recovery Cyclone N/AViton/Tygon Feeding Tube Please inquireNozzle 3, 4, 5

Compressed Air28 l/min air volume and 8kgf/cm2 compressed air is required

Type of GasN₂ gas (99.99% purity, medical grade) is required when using GAS-410




Performance

Structure

Standard

5

2012.indd 6 6/28/2012 1:59:06 PM


GAS-410(CE)

Overview

Requirements

The GAS-410 (CE) organic recovery unit allows for use of organic or non-water based sam-ples to be spray dried safely. This unit can also be used with aqueous samples that require nitrogen gas to be processed, for example when preventing oxidization. The GAS-410 is also easy to set-up, use, and maintain.

This unit is required to run any organic solvent based samples through a Yamato spray dryer. The GAS-410(CE) allows for efficient collection of the solvent through the cold trap system, which prevents any damage to the spray dryer during sample runs.

ORGANIC SOLVENT RECOVERY UNIT

MODEL GAS - 410(CE)System Sealed circulation typeCirculating Gas N2 gasCirculating Volume .12 ~ .65m³/minSolvent Recovery System Capacitor (cold trap) + freezerFine Dust Collecting System Cartridge filterCirculating Blower Roots blowerSolvent Collecting Container 2ℓ flaskIndicators Trap temperature, oxygen concentrationMeters Filter differential pressure meter, flow meters

Filter For protecting the O2 sensorPump For circulation for measuring oxygen

Compressor For pushing spray nozzleSafety Device Oxygen concentration meter, flammable gas

N2 Gas 0.1 Mpa 15ℓ/hExternal Dimensions 700 x 950 x 1500 mm or 27.6 x 37.4 x 59.1 inWeight 130 kg or 287 lbsPower Supply AC 200V - 240V, single-phase 5AN2 Gas Source 99% or higherRecommended Volume of N2 304 ℓ


Performance

Structure

Standard

6

2012.indd 7 6/28/2012 1:59:07 PM

PLASMA CLEANERPR - 300/301/500/510

Overview

Advantages



Yamato’s PR Series is an all inclusive solution for your laboratory plasma cleaning requirements. Using a PR series plasma cleaner is advantageous for a wide variety of manufacturing operations that require removal of many types of contamina-tion including organic residues, polymer coatings or build-ups, waxes, metals and metal oxides, fluorine and other halo-gens. Since plasma cleaning involves removing impurities and contaminants through the use of energetic plasma created from gaseous species, samples are left without any water marks or stains. The Yamato Plasma Cleaner is designed with a small RF generator so the equipment itself is very compact and fits anywhere.

Compact designDoes not leave stains or water spotsRemoves organic and aqueous residuesFast and efficient

SemiconductorsLensesPre-coating treatmentPrinted circuit boards

300 500

Applications

301 5103 separate chambersCompact size

Pyrex glass chamber Quartz chamberLarge chamber size

Quartz chamberLarge chamber size

MODEL PR - 300 PR - 301 PR - 500 PR - 510Cleaning Method Direct Plasma (DP) Direct Plasma (DP) Direct Plasma (DP) Direct Plasma (DP)RF 300W variable (100 x 3 chambers) Max. 300W Max. 500W Max. 500WOscillating Frequency 13.56 MHz 13.56 MHz 13.56 MHz 13.56 MHzReaction Chamber Material Hard glass Pyrex Glass Quartz QuartzChamber Dimensions Ф 64 x 160 mm or Ф2.5 x 6.2 in Ф118 x 160 mm or Ф4.6 x 6.2 in Ф215 x 305 mm or Ф8.4 x 12 in Ф215 x 305 mm or Ф8.4 x 12 in

External Dimensions438 x 520 x 556 mm or 17.2 x 20.4 x 21.8 in

438 x 520 x 656 mm or 17.2 x 20.4 x 25.8 in

438 x 520 x 760 mm or 172.4 x 20.4 x 29.9 in

438 x 520 x 760 mm or 17.2 x 20.4 x 29.9 in

Power Supply 115 V, Single phase 115 V, Single phase 115 V, Single phase 220 V, Three Phases

Performance

Structure

PR - 301 PR - 500 PR - 510

7

2012.indd 8 6/28/2012 1:59:07 PM

AUTOSTILLSWG - 270/280

Overview

Advantages



The WG series is designed to completely decontaminate and eliminate all impurities and other elements from the water for your laboratory needs. Yamato’s original Total Organic Carbon (TOC) degradation system can consistently maintain a Type 1 water quality. The distilled water storage tank digitally monitors TOC levels which preserves the purity of the water at all times.

Distilled water storage tank digitally monitors TOC level (WG280)Required maintenance indicator and warning lamp on display panelEquipped with water intake tray and drainage systemComes standard with membrane filter

SemiconductorsEnergyChemical and bioengineering

Applications

MODEL WG - 270 WG - 280Distilled Water ProcessDistilled Water ProductionDe-ionized Water Process External DimensionsDistilled Water Tank CapacityTrayInterface

Standard Power Supply 115 VAC 115 VACWater Feeding Hose 1 pc 1pcHose Clamp 1 pc 1 pcResin Cartridge 1 pc 1 pcPre-Treatment Cartridge 1 pc 1 pcPurity Cartridge 1 pc 1pcMembrane Filter 1 pc 1 pcDrain Hose 1 pc 1 pcIon Exchange Resin Cartridge Part No. CPCN30010 Part No. CPCN30010High Purity Cartridge Part No. CPCNS30011 Part No. CPCNS30011Pre-Treatment Cartridge Part No. 253099 Part No. 253099Membrane Filter Part No. 9020010004 Part No. 9020010004Air Vent Filter Part No. 9020020001 Part No. 9020020001UV Lamp, TOC Gauge Part No. 253251 Part No. 253251UV Lamp, TOC Reducing UV-71 Part No. 253250 Part No. 253250Deaeration Membrane Module Part No. 253249 Part No. 253249

600 x 660 x 780 mm or 23.6 x 26 x 30.7 in

Accessories for Maintenance


PerformanceIon Exchange Distillation Filtration

Sliding trayDigital display

Structure

Ion Exchange Filtration

20 ℓ or 0.7 ft³

1.8 ℓ / hr

270 280 Digitally monitors TOC levelEasy to maintain

Easy to maintain20 liter water tank capacity

WG - 270 WG - 280

MODEL PR - 300 PR - 301 PR - 500 PR - 510Cleaning Method Direct Plasma (DP) Direct Plasma (DP) Direct Plasma (DP) Direct Plasma (DP)RF 300W variable (100 x 3 chambers) Max. 300W Max. 500W Max. 500WOscillating Frequency 13.56 MHz 13.56 MHz 13.56 MHz 13.56 MHzReaction Chamber Material Hard glass Pyrex Glass Quartz QuartzChamber Dimensions Ф 64 x 160 mm or Ф2.5 x 6.2 in Ф118 x 160 mm or Ф4.6 x 6.2 in Ф215 x 305 mm or Ф8.4 x 12 in Ф215 x 305 mm or Ф8.4 x 12 in


438 x 520 x 656 mm or 17.2 x 20.4 x 25.8 in

438 x 520 x 760 mm or 172.4 x 20.4 x 29.9 in

438 x 520 x 760 mm or 17.2 x 20.4 x 29.9 in

Power Supply 115 V, Single phase 115 V, Single phase 115 V, Single phase 220 V, Three Phases

Performance

Structure

8

2012.indd 9 6/28/2012 1:59:07 PM

FREEZE DRYERSDC - 41A/41BDC - 401

Overview

Applications

Details

Yamato’s freeze dryers have become a common piece of equipment in the laboratories of many industries due to the fact that they make the drying process faster, more accurate, and easier to facilitate through innovative freeze drying technol-ogy and design. Yamato’s advanced freeze drying technology has made the process quicker, which means shorter wait times and rapid results. Samples stay contamination free throughout the process with the Automatic Leak System, which prevents any vacuum oil backflow to occur. The pre-installed Pirani vacuum gauges give precise readings of the internal conditions which give the needed information to reproduce the procedure when needed.

DC - 41A/41B

DC - 401

Prevents oil backflowShort cycle timeEasy to useContaminant free system

Food and beverageAgricultureCosmetics

The DC - 41A and DC - 41B are in demand for their compact design and programmable timer. The included drying agent (molecular sieve) is reusable after cleaining and drying in a laboratory oven.

The DC - 401 freeze dryer comes equipped with a cold trap that drops to - 45°C. This freeze dryer can also handle larger batch sizes as it can be ordered with 8, 12, or 16 flask port attachments. This flexibility makes it dynamic and highly versatile in any lab.

Advantages


BenchtopCan fit anywhere Equipped with cold trap40141

9

2012.indd 10 6/28/2012 1:59:07 PM


How It Works

DC - 401 DC - 41A DC - 41BTemperature of Cold Trap - 45°C N/A N/AMaximum Freeze Dryable Amount 0.6ℓ or .02 ft³ 200g/batch 200g/batchChamber Capacity of Cold Trap 4ℓ or .14 ft³ N/A N/AVacuum Meter Pirani Guage Bourdon Tube Thermocouple

Safety Devices


340 x 340 x 446 mm or 13.4 x 13.4 x 17.6 in

340 x 340 x 446 mm or 13.4 x 13.4 x 17.6 in

Cold Trap Dimensions Ф153 x H235mm N/A N/AWeight 51 kg or 112.4 lbs 14 kg or 30.9 lbs 14 kg or 30.9 lbsPower Supply AC 115 V, 5A AC 115 V, 1A AC 115 V, 1AVacuum Valve N/A 5 pcs 5 pcsVacuum Hose N/A 1 meter x 15 mm, 1 pc 1 meter x 15 mm, 1pcMolecular Sieve N/A 2.5 kg, 1 pc 2.5 kg, 1pc8 Port Flask Chamber Attachment Part No. 21256112 Port Flask Chamber Attachment Part No. 21256016 Port Flask Chamber Attachment Part No. 212562Dry Chamber Attachment Part No. 212563Sealed Dry Chamber Attachment Part No. 212564Flask - 120 ml 1 pc - Part No. 212820 1 pc - Part No. 212820 1 pc - Part No. 212820Flask - 250 ml 1pc - Part No. 212821 1pc - Part No. 212821 1pc - Part No. 212822Straight Joint Flask Adapter 1 pc - Part No. 212570 1 pc - Part No. 212570 1 pc - Part No. 212570Angled Joint Flask Adapter 1 pc - Part No. 212571 1 pc - Part No. 212571 1 pc - Part No. 212571Vacuum Hose DCRHKIT N/A N/AVacuum Pump ILM - 30210201 ILM - 30210201 ILM - 30210201

N/A N/A

Required Accessories

Performance

MODEL

Standard


StructurePurge valve for oil back flow prevention, electric leakage break with

over current protection, and refrigerator overload relay

DC - 401with 12 port attachment

(Part No. 212560)

Freeze-drying works by freezing the sample at down to -80°C, then reducing the surrounding pressure and adding enough heat to allow the frozen water in the material to sublime directly from the solid phase to the gas phase.

10

2012.indd 11 6/28/2012 1:59:08 PM

MAGNETIC STIRRERSVEL - F20500010/F20510010

Overview

Advantages

Applications


Yamato’s AREC series magnetic stirrers have white ceramic heating plates that are highly resistant to corrosion and easy to clean. This magnetic stirrer is excellent for observing change in color (i.e. titrations). The built-in electronic systems keep the stirring speed constant, even when used with viscous samples. Magnetic stirrers are a safe, easy to use, and reliable, and advanced solution to your stirring needs.

Ceramic coated plate prevents corosion and maintains heat uniformityInnovative design prevents corosion of equipment from spillsEasy to operateSimultaneous heating and mixingTitration observation capableMaintains constant stirring speed

Cosmetics and fragranceFood and beverageChemical compoundsEnvironmental studies

MODEL VEL - F20500010 VEL - F20510010Speed RangeMax. Stirring VolumeTemperature Range

Plate Material

HeaterTemperature ControlMotorDimensionsDimensions of PlateWeightPower Supply - AC 115 V N/A 7APower Supply - AC 230 V 3A N/A6 x 35 mm Stir Bar9.5 x 60 mm Stir Bar10 x 40 mm Stir Bar

205 x 96 x 335 mm or 8 x 3.7 x 13.2 in20 x 20 mm or 7.9 x 7.9 in

Performance

Structure

Standard

Aluminum die-cast housing with a highly developed paint to ensure excellent resistance

to chemical and mechanical agents

800 WElectronic Probe

High-power driving magnet type "PCM"

50 - 1300 rpm15ℓ or 4 gallons

5° - 540°C

Optional AccessoriesPart No. VEL-A00001056Part No. VEL-A00001061Part No. VEL-A00001060

3.9 kg or 8.6 lb

11

2012.indd 12 6/28/2012 1:59:09 PM

Overview

Advantages

Applications


Yamato overhead stirrers are used widely in food and cosmetics industries along with various other R&D laboratories. The ability to keep constant rotation speeds in various viscosities has made the LT series very popular. Unlike conventional stirrers, the power-ful DC brushless motor and feedback control circuit of the laboratory stirrers maintain constant speed in samples that are high in viscosity. Our powerful digital stirrers handle from 10 to 1200 rpm. The dynamism and power of the motor has proven to be very durable and sturdy.

Variable torque rangePrevents injury with safety cover Wide selection of compatible propeller sizes and shaft lengthsGlass shaft and propeller available for corrosive solutions

Cosmetics and fragranceFood and beverageChemical compoundsEnvironmental studies

OVERHEAD STIRRERSLT - 400A/B/C/D

LT - 500A/B

MODEL LT - 400 A LT - 400 B LT - 400 C LT - 400 D LT - 500 A LT - 500 BSpeed Range 10 - 300 rpm 15 - 600 rpm 25 - 1200 rpm 60 - 300 rpm 15 - 600 rpm 25 - 1200 rpmMax. Torque (N m) 0.9 0.5 0.3 0.1 1.0 0.6Viscosity of Material High Medium Medium - Low Low High MediumMotor 30 W 30 W 30 W 30 W 70 W 70 WChuck Ф 8 mm drill chuck Ф 8 mm drill chuck Ф 8 mm drill chuck Ф 8 mm drill chuck Ф 8 mm drill chuck Ф 8 mm drill chuckSpeed Control Feedback control Feedback control Feedback control Feedback control Feedback control Feedback controlDisplay PanelSafety DevicesExternal DimensionsWeightPower SourceChuck Key 1 pc 1 pc 1 pc 1 pc 1 pc 1 pcSafety Cover 1 pc 1 pc 1 pc 1 pc 1 pc 1 pcClamp 1 pc 1 pc 1 pc 1 pc 1 pc 1 pc500 mm Stirring Shaft Part No. 231384 Part No. 231384 Part No. 231384 Part No. 231384 Part No. 231384 Part No. 231384PropellerStand and Rod Assembly Part No. LR - 41 -124 Part No. LR - 41 -124 Part No. LR - 41 -124 Part No. LR - 41 -124 Part No. LR - 41 -124 Part No. LR - 41 -12475 mm Four -Bladed Propeller Part No. LSA-11 Part No. LSA-11 Part No. LSA-11 Part No. LSA-11 Part No. LSA-11 Part No. LSA-1160 mm Four-Bladed Propeller Part No. LSA-12 Part No. LSA-12 Part No. LSA-12 Part No. LSA-12 Part No. LSA-12 Part No. LSA-1240 mm Four-Bladed Propeller Part No. LSA-13 Part No. LSA-13 Part No. LSA-13 Part No. LSA-13 Part No. LSA-13 Part No. LSA-1360 mm Turbine Propeller Part No. LSA -15 Part No. LSA -15 Part No. LSA -15 Part No. LSA -15 Part No. LSA -15 Part No. LSA -15100 mm Turbine Propeller Part No. LSA-16 Part No. LSA-16 Part No. LSA-16 Part No. LSA-16 Part No. LSA-16 Part No. LSA-1660 mm Adjustable 2 Stage Turbine Propeller Part No. 2310630101 Part No. 2310630101 Part No. 2310630101 Part No. 2310630101 Part No. 2310630101 Part No. 231063010160 mm Glass Shaft and Propeller Part No. 231385 Part No. 231385 Part No. 231385 Part No. 231385 Part No. 231385 Part No. 231385Folding Propeller (18/45 mm) Part No. LSA-14 Part No. LSA-14 Part No. LSA-14 Part No. LSA-14 Part No. LSA-14 Part No. LSA-1428 mm Two-bladed Propeller LSA-19 LSA-19 LSA-19 LSA-19 LSA-19 LSA-19Adapter for Decompression Stirrer LSA-03 LSA-03 LSA-03 LSA-03 LSA-03 LSA-03Auxiliary Stirrer LSA-01 LSA-01 LSA-01 LSA-01 LSA-01 LSA-01


Performance

- - - - - - Digital speed display, overload display, torque indicator (20% gradation) - - - - - -- - - - - - Current-restraining circuitry, thermal overload cut-off, drill chuck protector - - - - - -

- - - - - - - - - - - AC 100 - 125 V, 50/60 Hz, single phase - - - - - - - - - - - -- - - - - - - - - - - - - - - 2.4 kg or 5.3 lbs - - - - - - - - - - - - - -- - - - - - - - - - - 146 x 154 x 165 mm or 5.8 x 6.1 x 6.5 in - - - - - - - - - - -

Structure

Standard



- - - - - - - - Please refer to "Optional Accessories" below - - - - - - - - -

LT - 400B

12

2012.indd 13 6/28/2012 1:59:10 PM


SHAKERSSA - 300/320/400

Overview

Advantages

Applications


The SA series of Yamato Laboratory Shakers have been designed with efficiency and ease-of-use in mind. This shaker series offers a variety of shaking abilities and a wide array of accessories and fittings to customize the shaker to specific laboratory needs and sample requirements. The SA-300 provides two-dimensional shaking; horizontal and vertical. The SA-320 shaker provides rotary shaking that yields a higher shaking effect for samples that are harder to mix. The SA-400 is a dual-sided vertical shaking type, which is ideal for laboratories that need multiple samples shaken simultaneously.

VersatilityVariety of attachments for different shaking methodsStable shaking frequenciesHigh-torque shaking powerEasy to use dial settings and digital displays

Food and beverageCosmetics and fragranceChemical and biosciencesPharmaceutical

Two dimensional shaking; horizontal and vertical Rotary shaking Dual-sided vertical shaking300 320 400

MODEL SA - 300 SA -320 SA - 400Shaking Method Reciprocate shakings Rotary shakings Reciprocate ShakingsShaking Speed 20 - 300 rpm 20 - 210 rpm 20 - 300 rpmTimer 0 - 60 min. 0 - 60 min. 0 - 60 min.


425 x 460 x 425 mm or 16.1 x 17.8 x 26.4 in

520 x 460 x 462 mm or 20.5 x 18.1 x 18.2 in

Weight

Power Supply

Fuse 1 pcs 1 pcs 1 pcs

Carbon Brush 1 set 1 set 1 set

Centrifuged Tube Holder Part No. 232087 Part No. 232087 Part No. 232087

Separating Funnel Holder Part No. 232096 Part No. 232096 Part No. 232096

Test Tube Holder Part No. 232086 Part No. 232086 N/A

Mounting Stage Part No. 232095 Part No. 232095 N/ATest Tube Holder Part No. 232086 Part No. 232086 N/ATest Tube Rack Holder Part No. 232088 Part No. 232088 N/AErlenmeyer Flask Holder Part No. 232097 Part No. 232097 N/A

Erlenmeyer Flask Holder Clamp

Part No. 232062 (100mℓ) Part No. 232063 (200 mℓ) Part No. 232064 (300mℓ) Part No. 232065 (500 mℓ) Part No. 232066 (1ℓ)

Part No. 232062 (100mℓ) Part No. 232063 (200 mℓ) Part No. 232064 (300mℓ) Part No. 232065 (500 mℓ) Part No. 232066 (1ℓ)

N/A

- - - - - - 40 kg or 88 lbs - - - - - -

Optional Requirements

Performance

Standard



115V 1.9A 50/60Hz - also available in 220V operation

SA - 320 SA - 300 SA - 400

13

2012.indd 14 6/28/2012 1:59:12 PM

ORBITAL SHAKERSOU-300

Overview

Advantages

Applications


The Yamato Digital Orbital Shaker is a powerful orbital shaker in a compact size ideal for bench-top and cold room applications. It is capable of shaking flasks up to 2 liters in size and racks of 15ml and 50ml tubes at speeds on 50 to 300 rpm. It has a orbit size of 19mm (0.75 inch) and takes up only 12” x 12” (1 sqft.) of bench space. This orbital shaker uses advanced digital controls and reliable brushless mo-tor technology for smooth and quiet operation. The easy to use controls allow the user to digitally set both speed and time and the gentile ramp up to speed helps protect delicate samples.

Easy to attach and remove platformsUniversal platform with 3 different clamp sizesTube platformSimple controls - plug and play design

Cosmetics and fragrancePharmaceuticalsChemical compoundsEnvironmental studies

SOU-300 shown with universal platform and various flask clampsMODEL SOU-300

Speed 50 to 300 rpm in increments of 10 rpmTimer Up to 99 hours in increments of 1 minuteOrbit Diameter 19 mm

External Dimensions 11 x 10 x 5 inches

Weight 12 lbsMotor Brushless DCPower Supply 115V 1.5A 50/60Hz - also available in 220V operationTest Tube Platform or Part No. SOU-SBT3001550Universal Platform Part No. SOU-SBT300UNV125ML FLASK CLAMP Part No. SOU-FCLAMP125250ML FLASK CLAMP Part No. SOU-FCLAMP125500ML FLASK CLAMP Part No. SOU-FCLAMP125

Optional Requirements

Performance

Standard


14*Not available for sale in the U.S.

2012.indd 15 6/28/2012 1:59:14 PM

Details

IC

IN

IN-602CSS

This series includes desktop incubators that are space saving. Each IC model is ergonomically designed with control panels placed so that users can operate the incubator comfortably and easily.

These programmable low temperature incubation chambers can be used for a wide variety of applications, such as storage of culture media, serum, and medicine, as well as for cultivation of microorganisms, and incubation to environ-mental testing. Glass inner doors minimize temperature change when inspecting samples.

Programmable low temperature incubator. In addition to all of the characteristics and functions of the IN series incuba-tor, the IN-602CSS is equipped with an outlet for the SOU-300 orbital shaker. Glass inner doors minimize temperature change when inspecting samples.

INCUBATORS IC - 103C/103CW/403CR/603CR/803CIN - 604/602CSS/804

Overview

Advantages

Applications


Yamato incubators accurately control the temperature and humidity conditions in which microbiological cultures and samples can be maintained. The IC and IN series include a variety of sizes to fit your specific needs, whether it is for a classroom experiment or state of the art pharmaceutical laboratory. The innovative design of a dual door system allows you to view the samples without disrupting the chamber conditions.

Observation glass doorVariety of sizesCommunication port comes standrard with IC - X03CR models

MicrobiologyFermentationBiochemical studiesBacteriologyHematological studiesUSDA Microbiology Guidebook proceduresCrystallization studiesSalmonella within Food Processing Quality Control procedures

IC - 101IC - 101W

IC INHigher max temperatureVariety of sizesNautral convection

Lower minimum temperatureLarger CapactiyForced circulationProgrammable

15

2012.indd 16 6/28/2012 1:59:15 PM


MODEL IC - 103C / 103CW IC - 403C/403CW/403CR IC - 603C / 603CR IC - 803CRCirculation MethodTemperature Range Room temp. +5° - 60° CTemperature Control AccuracyTemperature Distribution AccuracyTemperature ControllerObservationSafety Devices

External Dimensions410 x 380 x 520 mm or 16 x 15 x 21 in

560 x 606 x 820 mm or 22.1 x 23.9 x 32.3 in

710 x 656 x 870 mm or 28 x 25.8 x 34.3 in

710 x 656 x 1619 mm or 28 x 25.8 x 63.8 in

Chamber Dimensions350 x 300 x 360 mm or13.7 x 11.8 x 14.1 in

450 x 480 x 450 mm or17.7 x 18.9 x 17.7 in

600 x 530 x 500 mm or23.6 x 20.8 x 19.6 in

600 x 530 x 1000 mm or23.6 x 20.8 x 39.3 in

Chamber Capacity 37 ℓ or 1.3 ft³ 97 ℓ or 3.4 ft³ 159 ℓ or 5.6 ft³ 318 ℓ 11.2 ft³Weight 17 kg or 37.5 lbs 45 kg or 99.2 lbs 65 kg or 143.3 lbs 102 kg or 224.9 lbsPower Supply - AC 115 V 1.8 Amps 2.8 Amps 3.7 Amps 6.6 AmpsCommunication Port N/A Model No. IC - 403CWR Model No. IC - 603CR YesObservation Window Model No. IC - 103CW Model No. IC - 403CW N/A N/AShelves 2 pcs 2 pcs 2 pcs 4 pcsShelf Brackets 4 pcs 4 pcs 4 pcs 8 pcsStand Part No. 211856 Part No. 211856 Part No. 211856 N/AShelf and Brackets Part No. 211192 Part No. 212246 Part No. DN-63-903 Part No. DN-63-903Communication Terminal Part No. R5232ODK19 Part No. R5232ODK19 Part No. R5232ODK19 Part No. R5232ODK19Temperature Output Terminal Part No. ODK -12 Part No. ODK -12 Part No. ODK -12 Part No. ODK -12Communication Converter Part No. R52232ODK18 Part No. R52232ODK18 Part No. R52232ODK18 Part No. R52232ODK18

- - - - - - - - - - - - - ± 1.0° C @ 37° C - - - - - - - - - - - - - -

Performance

- - - - - - - - - - - PID controlled by micro processor - - - - - - - - - - - - - - - - - - - - - Inner glass door for sample observation - - - - - - - - - -

- - - - - - - - - - - Gravity convection by air jacket - - - - - - - - - - -

- - - - - - - - - - - - - - ± .5° C @ 37° C - - - - - - - - - - - - - - - - - - - - - - - Room temperature +5° - 80° C - - - - - - - - -

Standard



Self diagnostic function, independent overheat prevention, and key lockStructure

MODEL IN - 604/604W IN - 602CSS IN - 804Circulation MethodTemperature RangeTemperature Control Accuracy

Temperature ControllerObservationProgrammable ControllerSafety Devices

External Dimensions710 x 645 x 1630 mm or 28 x 25.8 x 64.2 in

Chamber Dimensions600 x 477 x 1000 mm or 23.6 x 18.7 x 39.3 in

Chamber Capacity 286 ℓWeight 120 kg or 264.6 lbsWindow NoneCable Port 30 mmPower Supply - AC 115 V 10.4 AmpsShelves 5 pcsShelf BracketsInterior Power Hook Up N/A Yes N/AShaker N/A SOU-300 10 pcs

Optional Accessories Shelf and Brackets Part No. 211221

30 mm 8.7 Amps

3 pcs

Part No. 211221

6 pcsIncluded Accessories

PID controlled by micro processorInner glass door for sample observation

Self diagnostic function, independent overheat prevention, and key lock

-10° to 50° C

Programmable with 32 step

Performance

Structure

Standard

± .3° C / ± 1.0° C when refrigerator is in constant operation

Forced circulation

710 x 654 x 913 mm or 28 x 25.8 x 36 in

600 x 477 x 500 mm or 23.6 x 18.7 x 19.6 in

143 ℓ93 kg or 205 lbs

IN-604W

IN - 802

16

2012.indd 17 6/28/2012 1:59:15 PM

Overview

Advantages

Applications


Yamato muffle furnaces are recognized for their durability and tightly sealed doors, which is of utmost importance when the furnace reaches their maximum temperatures of over 1000° Celsius. Yamato muffle furnaces are front-loading and are used for high-temperature applications such as fusing glass, creating enamel coatings, ceramics and soldering and brazing metals. They are also used in many research facilities by chemists to ensure a sample is completely dry. The FO series represents the standard type of muf-fle furnaces that use a microprocessor-controlled thermo-regulator that is characterized by excellent repeatability.

Reaches max temperature in ~60 min. (FO-110/210 models only) Large internal capacityEquippped with self-diagnositic functions for increased safetyTightly sealed chamber door to prevent any injuryVarious accessories for use of different types of samples

JeweleryCeramicsMiningEnvrionmental testingPharmaceutical developmentContaminant evaluation

MUFFLE FURNACESFO - 100C/200C/310C/410C/510CR

MODEL FO - 110C FO - 210C FO - 310C FO - 410C FO - 510CRTemperature Range 100° - 1150° C 100° - 1150° C 100° - 1150° C 100° - 1150° C 100° - 1150° C

Temperature Control Accuracy ± 2° C @ 1150° C ± 2° C @ 1150° C ± 2° C @ 1150° C ± 2° C @ 1150° C ± 2° C @ 1150° C

Time Required to Reach Max. Temp. ~ 60 min. ~60 min. ~70 min. ~70 min. ~80 min.

Operating Ambient Temp. Range 5° - 35° C 5° - 35° C 5° - 35° C 5° - 35° C 5° - 35° C

Temperature Controller

Temperature Sensor

Heater 1 Kw 1.5 kW 2.0 kW 2.2 kW 2.5 kW

Cooling Fan Axial Fan Motor Axial Fan Motor Axial Fan Motor Axial Fan Motor Axial Fan Motor

Chamber Ceramic Fiber Ceramic Fiber Ceramic Fiber Ceramic Fiber Ceramic Fiber

Additional Functions

Safety Devices

External Dimensions346 x 405 x 517 mm or 13.6 x 16 x 20.4 in

346 x 505 x 567 mm or 13.6 x 19.9 x 22.3 in

446 x 505 x 567 mm or 17.6 x 19.9 x 22.3 in

446 x 554 x 567 mm or 17.6 x 21.8 x 22.3 in

507 x 504 x 627 mm or 20.0 x 19.8 x 24.7 in

Internal Dimensions100 x 150 x 100 mm or 3.9 x 5.9 x 3.9 in

100 x 250 x 150 mm or 3.9 x 9.8 x 5.9 in

200 x 250 x 150 mm or 7.9 x 9.8 x 5.9 in

200 x 300 x 150 mm or 7.9 x 11.8 x 5.9 in

300 x 250 x 150 mm or 11.8 x 9.8 x 5.9 in

Chamber Capacity 1.5 ℓ or .05 ft³ 3.75 ℓ or .13 ft³ 7.5 ℓ or .26 ft³ 9 ℓ or .32 ft³ 11.3 ℓ or .40 ft³

Weight 24 kg or 52.9 lbs 30 kg or 66.2 lbs 37 kg or 81.6 lbs 38 kg or 83.8 lbs 44 kg or 97 lbs

Power Supply - AC 220V 5 Amps, single phase 7.5 Amps, single phase 10 Amps, single phase 11 Amps, single phase 12.5 Amps, single phase

Included Accessories Exhaust Port Cap 1 pc 1 pc 1 pc 1 pc 1 pc

Exhaust Unit 1 pc - Part No. 214097 1 pc - Part No. 214097 1 pc - Part No. 214097 1 pc - Part No. 214097 1 pc - Part No. 214097

Temperature Output Terminal (4 - 20 mA) ODK12 ODK12 ODK12 ODK12 ODK12

N₂ Gas Inlet Port

Sample Tray Part No. 281310 Part No. 281310 Part No. 281310 Part No. 281310 Part No. 281310

*Communication Terminal and R5232ODK19 R5232ODK19 R5232ODK19 R5232ODK19 R5232ODK19

Communication Converter R5232ODK18 R5232ODK18 R5232ODK18 R5232ODK18 R5232ODK18

Standard

Optional Accessories- - - - - - - - - - - Please indicate when ordering; must be installed at factory - Part No. 281303 - - - - - - - - - - -

Performance

Structure

- - - - - - - - - - PID controlled by VS4 controller with digital settings and digital display - - - - - - - - - -

- - - - - - - - - - - - - - - - R thermocouple (W sensor) - - - - - - - - - - - - - - -

- - - - - - - - - - - Locking door, auto recovery after power failure, calibration offset - - - - - - - - - - -

Earth leakage/circuit breaker, overheat prevention, self-diagnostic functions (informs user about errors; i.e. memory, sensor, SSR short circuit error)

FO - 100C FO - 310C

17

2012.indd 18 6/28/2012 1:59:16 PM

BENCHTOP STERILIZERSK-100C/110C

Overview

Advantages

Applications


Yamato’s SK series provides a sterilizer with 18 liter chamber for research processes and samples that do not require much space. High pressure steam is the most widely used method for sterilization due to its speed, reliability, and effectiveness. Yamato’s newly de-signed small capacity autoclaves provide a safe, reliable high pressure steam sterilizaing environment within a self-contained unit that is particularly easy to use. This series of autoclaves is ideal for a wide range of applications.

Low water sensor to prevent damagePortable, table topDigital display with programmable sterilizing time and temp Drain valve for easy clean up and dual exterior wall makes safe to touch

Food and beverageAgricultureCosmeticsHospitalsHealth clinicsDay SpasBiology and Chemical LaboratoriesDental and Orthodontic OfficesTattoo Parlors

MODEL SK - 100C SK - 110CSystemTemperature Control Range 50° - 126° C 50° - 126° CMaximum Operational Pressure .165 Mpa .165 MpaTemperature ControllerChamber Temperature SensorWater Temperature Sensor Float Switch Float SwitchHeater for Sterilization Pipe heater 1100W Pipe heater 1100WTime Range: 0 - 999 min Range: 0 - 999 minLoading Top loading Top loadingSafety Devices

External Dimensions 440 x 440 x 545 mm or 17.3 x 17.3 x 21.5 in

440 x 440 x 545 mm or 17.3 x 17.3 x 21.5 in

Internal Dimensions Ф296 x 245 mm orФ11.6 x 9.6 in

Ф296 x 245 mm orФ11.6 x 9.6 in

Chamber Capacity 18 ℓ or .635 ft³ 18 ℓ or .635 ft³Weight 14 kg or 30.9 lbs 14 kg or 30.9 lbsPower Supply AC 110-120 V; 9-12 Amps AC 200-240 V; 4-6 Amps

Standard

Performance

Structure

Pt 100 Ω resistance thermometer sensor

Water level detection (liquid expansion method), safety valve

PID control by micro processor

Automatic high pressure steam sterilization

18

2012.indd 19 6/28/2012 1:59:17 PM

Details

SN Series

SQ Series

SM Series

The SN series sterilizers are equipped with a highly efficient cooling fan which results in a much shorter cooling time that ultimately reduces the sterilization time. The SN series comes pre-programmed with presets for commonly used sample types. These presets make sterilization quick and easy for users.

SQ series sterilizers are popular for their short stature making it very accessible and easier to clean and also its larger capacity. The SQ series come pre-programmed as well with presets for commonly used sample types.

SM series sterilizers are great for their drying capabilitiy. These sterilizers have a pre-installed drying cycle that quickly dries the sample inside, making the sample ready for use right after sterilization.

STERILIZERSSN - 300C/310C/500C/510CSQ - 500C/510C/810CSM - 300/310/500/510

Overview

Advantages

Applications


Yamato’s SN, SQ, and SM series provide a versatile line of high quality sterilizers. High pressure steam is the most widely used method for sterilization due to its speed, reliability, and effectiveness. Yamato top-loading autoclaves provide a safe, reliable high pressure steam sterilizing environment within a self-contained unit that is particularly easy to use. These reliable, energy saving autoclaves are ideal for a wide range of applications.

Top loadingLow water indicator to prevent damage Easy to useEasy to maintainMobile; on wheels

Fast cooling timePreset modes for common samplesSlow pressure release

Wider and shorter structurePreset modes for common samplesSlow pressure release

EconomicalHighly mobileDrying cycle

Food and beverageAgricultureCosmeticsHospitalsHealth ClinicsDay SpasBiology laboratoriesChemistry laboratories

SN SQ SM

SM - 200 SN - 500C SQ - 810C

19

2012.indd 20 6/28/2012 1:59:19 PM


MODEL SM - 200 / SM - 210 SM - 300 / SM - 310 SM - 500 / SM - 510SystemSterilizing Temperature Range 105° - 123° C 105° - 128° C 105° - 128° CDrying Temperature Range 150° - 180° C 150° - 180° C 150° - 180° CMaximum Operational Pressure .18 Mpa (26.1 psi) .2 Mpa (29.0 psi) .2 Mpa (29.0 psi)Temperature ControllerChamber Temperature SensorWater Temperature Sensor Type T thermocouple Type T thermocouple Type T thermocoupleHeater for Sterilization Pipe heater 1.3 kW Pipe heater 1.7 kW Pipe heater 2.0 kWHeater for Drying Band heater 1.0 kW Band heater 1.5 kW Band heater 1.5 kWLoading Top loading Top loading Top loadingPortability On casters On casters On castersSafety DevicesExternal Dimensions 410 x 470 x 957 mm

440 x 530 x 968 mm

440 x 530 x 1088 mm

Internal Dimensions Ф240 x 445 mm

Ф300 x 445 mm Ф300 x 665 mm Chamber Capacity 20 ℓ or .8 ft³ 32 ℓ or 1.1 ft³ 47 ℓ or 1.7 ft³

Weight 65 kg or 143.3 lbs 80 kg or 176.4 lbs 85 kg or 187.5 lbsPower Supply - AC 115 V SM - 200, 13 Amps SM - 300, 17 Amps SM - 500, 15 AmpsPower Supply - AC 220 V SM - 210, 6 Amps SM - 310, 11 Amps SM - 510, 11 Amps

Standard

Performance

Structure

Self diagnostic function, locking lid mechanism, safety valve

Automatic high pressure steam sterilization

PID control by micro processorPt 100 Ω resistance thermometer sensor

MODEL SN - 300C / SN - 310C SN - 500C / SN - 510C SQ - 500C / SQ - 510C SQ - 810CSystemTemperature RangeMaximum Operational PressureCoolingTemperature ControllerLoadingPortabilitySafety Devices


460 x 590 x 1058 mm or 18.1 x 23.2 x 41.6 in

520 x 660 x 881 mm or 20.5 x 26 x 34.6 in

520 x 660 x 1161 mm or 20.5 x 26 x 45.7 in

Internal Dimensions Ф300 x 445 mm Ф300 x 665 mm Ф370 x 470 mm Ф370 x 750 mm Chamber Capacity 32 ℓ or 1.1 ft³ 47 ℓ or 1.7 ft³ 50 ℓ 1.8 ft³ 80 ℓ 2.8 ft³Weight 75 kg or 165.4 lbs 85 kg or 187.5 lbs 95 kg or 209.5 lbs 105 kg or 231.5 lbsPower Supply - AC 100 - 120 V SN - 300C 16.5 - 20 Amps SN - 500C 19.5 - 23.5 Amps SQ - 500C 20.5 - 24.5 Amps N/APower Supply - AC 200 - 240 V SN - 310C 8.5 - 10 Amps SN - 510C 10 - 12 Amps SQ - 510C 10.5 - 12.5 Amps SQ - 810C 10.5 - 12.5 AmpsStainless Steel Basket (mesh) 2 pcs 3 pcs 2 pcs 3 pcsVapor Cup 1 pc 1 pc 1 pc 1 pcDrain Bottle 1 pc 1 pc 1 pc 1 pcBottom Plate 1 pc 1 pc 1 pc 1 pcFilter 1 pc 1 pc 1 pc 1 pcStainless Steel Basket (mesh) No. 241088 No. 241089 No. 241099 No. 241099Stainless Steel Basket (mesh) with Stacking Fitting No. 241092 No. 241091 No. 241090 No. 241090Stainless Steel Basket (mesh) with Mesh Shelf No. 241095 No. 241094 No. 241097 No. 241097Stainless Steel Solid Basket No. 241084 No. 241084 No. 241098 No. 241098Stainless Steel Bucket No. 241151 No. 241151 No. 241152 No. 241152Chamber Temperature SensorSample Temperature SensorPressure GaugeRecorderExternal Alarm Output TerminalTmperature Output TerminalTime-Up Output Terminal

- - - - - - - - - - - - - - Top loading - - - - - - - - - - - - - -- - - - - - - - - - - - - - On casters - - - - - - - - - - - - - -

- - - - - - Self diagnostic function, locking lid mechanism, safety pressure valve - - - - - -

- - - - - - - - - - - - Equipped with cooling fan - - - - - - - - - - - -

- - - - - - - - - Automatic High pressure steam sterilization - - - - - - - - -- - - - - - - - - - - - - - 45° - 135° C - - - - - - - - - - - - -

- - - - - - - - - - - - - - .255 Mpa - - - - - - - - - - - - - -

- - - - - - - - - - - PID control by micro processor - - - - - - - - - - -


Performance

Structure

Standard


1 pc, 4 - 20 mA- No. 2411581 pc, relay, contact output - No. 241159

3 pcs, type T thermocouple - No. 2411531 pc, type T thermocouple - No. 2411541 pc, external installation - No. 241155

1 pc, records temperature and pressure, external installation - No. 2411561 pc - No. 241157

Mesh Baskets

20

2012.indd 21 6/28/2012 1:59:19 PM

ROTARY EVAPORATORSRE - 200/301/601/801

Overview

Advantages

Applications

Yamato’s rotary evaporators are built with metal bodies, making this equipment highly dependable and extremely durable. Rotary evaporation is the most common and efficient method of separating liquids. The rotating flask generates an effective heat transfer for fast evaporation, which in turn prevents the sample from being overheated. Yamato rota-vaps are known for the steady rotation speeds of the sample flask which allows for uniformity within the sample, especially when composed of various solvents.

Patented condenser designsWater bath has a removable bowl for easy cleaning3 different compatible glassware sets for different usesCustomize your rotary evaporator with various accessoriesSimple and intuitive assembly for easy cleaning and storage

Crime scene investigation Chemical trialsEnvironmental testingSeparation observation

Ordering Guide

RE - 200

RE -301/601/801

RE - 200 - 100 A

RE - 300 A W T* 2**

Water bath size; select either 100, 200, or 400 to indicate size of water bath

Glassware type; select either A, B, or C. Glass-ware set A includes a diagonal diagnoal condenser, glassware set B includes a vertical condenser, and glassware set C includes a vertical condenser for solvents with low boiling points

Glassware type; select either A, B, or C. Glassware set A includes a diagonal condenser, glassware set B includes a vertical condenser, and glassware set C includes a vertical condenser for solvents with low boiling points

Bath type; select between “W” and “O”. W is for the BM-500 water bath and O is for the BO-400 oil bath

Option; select between “T” or “V”. T is for the vapor temper-ature indicator, while V is for the vacuum regulator

* can be blank** can be “2” or blank - 2 is for 220V rotary evaporator sets

RE - 301AW RE - 200-200B RE - 601CW

21

2012.indd 22 6/28/2012 1:59:19 PM

* can be blank** can be “2” or blank - 2 is for 220V rotary evaporator sets


Additional AccessoriesThis cool water circulator keeps the water in the condenser at a stable low temperature, allowing ideal conditions for collecting the maximum amount of solvent.


MODEL RE - 200/210 RE - 301 RE - 601 RE - 801Rotational Frequency Control Range 20 - 180 rpm 20 - 250 rpm 20 - 250 rpm 20 - 250 rpmData N/A N/AMotorLift Manual Automatic Automatic AutomaticMaterial Metal Diecast Metal Diecast Metal Diecast Metal

Standard Power Supply 115 V, 11 Amp; 230V, 5 A 100 - 240 VAC, 1.5 A 100 - 240 VAC, 1.5 A 100 - 240 VAC, 1.5 AIncluded Accessories Vacuum Regulator N/A Option VR - 600 VR - 800

Glassware A, B, or C A, B, or C A, B, or C A, B, or CWater or Oil Bath BM-100/200/400 or BO-600 BM-500/510 or BO-400/410 BM-500/510 or BO-400/410 BM-500 or BO-401Arm Jack JK200 N/A N/A N/ACooling Water CirculatorAspirator WP - 15 (115V) or WP - 25 (220V) WP - 15 (115V) or WP - 25 (220V) WP - 15 (115V) or WP - 25 (220V) WP - 15 (115V) or WP - 25 (220V)

Vacuum PumpILM - 40017106 (8mbar, 6 torr) or ILM - 40008203 (2 mbar, 1.5 torr)

ILM - 40017106 (8mbar, 6 torr) or ILM - 40008203 (2 mbar, 1.5 torr)



Vacuum Regulator N/A Part No. VR-300 Included IncludedVapor Temperature Indicator N/A Part No. TA-300 Included Included

Data of 53 solvents can be memorized



Structure

- - - - - - - - CF -300 only with glassware A or B - - - - - - - -

- - - - - - - - - DC brushless motor - - - - - - - - -

Performance

CF -300/701

MODEL CF - 300 CF - 701Circulation TypeOperating Temperature RangeTemp. Adjustment AccuracyCooling Capacity @ Lquid Temp. 20° C N/A N/ACooling Capacity @ Lquid Temp. 10° C ~ 450W (385 Kcal/hr) ~900W (770 Kcal/hr)Cooling Capacity @ Lquid Temp. 0° C ~ 350W (300 Kcal/hr) ~700W (600 Kcal/hr)Cooling Capacity @ Lquid Temp. -10° C ~260W (220 Kcal/hr) ~480W (410 Kcal/hr)

Standard Power Supply 50/60Hz 115VAC 3.9A 115VAC 13A

Performance

Closed system, circulation by pump-20° C - Room Temp.

±2° C

22

2012.indd 23 6/28/2012 1:59:20 PM

FUME HOODMS-90C

Overview

Advantages

The interior and workbench surfaces are made from chemical-resistant stainless steel. The accessory options can meet the diverse needs of a client’s application requirements. Its simplified installation requires no excessive wiring or piping and makes it ready for immediate use.

EconomicalEfficient size


MODEL MS - 90CExterior Surface Cold rolled steel plate with chemical-resistant coatingInterior Surface Stainless steel plate SUS304Workbench Surface Stainless steel plate SUS304Air Exhaust Pipe Stainless steel plate SUS304Glass Door 5 mm tempered glass. Sliding weight balanced door

Fluorescent Lamp Single phase; 115V 20 W, 1 LampWater Valve 1 ValveSocket AC 115V 5A, 2 SocketsExhaust Air Flow 7 m³/min (recommended)Inside Static Pressure 40pA (4mmH₂O; recommended)Exhaust Motor 200 WPower Source Single phase AC 115V, 15ASize (W x D x H) 35.5 x 30 x 80 inches (not included extruding parts)Weight Approx. 287 lbsIncluded Accessories Drain pipe, waste liquid recycle tank, trolley

Structure

Standard

Exhaust

23

2012.indd 24 6/28/2012 1:59:22 PM

GRAVITY OVENSDVS - 402/602

DX - 302/402/602

Overview

Advantages

Applications


Yamato’s gravity or natural convection ovens come in various sizes and are very economical. The DX and DVS series ovens are a great solution to basic laboratory needs.

EconomicalVariety of sizes

DryingAgingCuringBonding

Details

DVS Series

DX Series

The DVS series gravity ovens are programmable, making it easy to record exact settings and replicate experiments later on. Ramp, soak, and fall time are also all adjustable.

The DX series is great for basic laboratory oven needs; it is economical, easy to use and maintain.

DVS DX EconomicalReaches temperature of 260° C

30 step programmabilityAdjustable ramp, soak, and fall times

MODEL DVS - 402C DVS-602C DX-302C DX-402C DX-602CCirculation MethodTemperature RangeTemperature Control AccuracyTemperature Distribution AccuracyTemperature ControllerTime to Reach Max. Temperature Approx. 45 min. Approx. 60 min. Approx. 80 min.Observation Window

Controller

Safety Devices

External Dimensions560 x 601 x 820 mm or22.0 x 23.7 x 32.3 in

710 x 651 x 870 mm or28.0 x 25.6 x 34.3 in

400 x 440 x 630 mm or15.7 x 17.3 x 24.8 in

550 x 540 x730 mm or21.7 x 21.3 x 28.7 in

700 x 640 x 830 mm or27.6 x 25.2 x 32.7 in

Internal Dimensions450 x 490 x 450 mm or17.7 x 19.3 x 17.7 in

600 x 540 x 500 mm or23.6 x 21.3 x 19.7 in

300 x 310 x 300 mm or11.8 x 12.2 x 11.8 in

450 x 410 x 400 mm or17.7 x 16.1 x 15.7 in

600 x 510 x 500 mm or23.6 x 20.1 x 19.7 in

Chamber Capacity 99 ℓ or 3.5 ft³ 162 ℓ or 5.7 ft³ 28 ℓ or 1.0 ft³ 74 ℓ or 2.6 ft³ 153 ℓ or 5.4 ft³Weight 48 kg or 106 lbs 63 kg or 139 lbs 23 kg or 51 lbs 38 kg or 84 lbs 56 kg or 123 lbsPower Supply - AC 115 V 11 Amps 12.5 Amps 9.5 Amps 14 Amps 14 AmpsPower Supply - AC 220 V Retrofit only Retrofit only Retrofit only Retrofit only Retrofit onlyShelves 2 pcs 2 pcs 2 pcs 2 pcs 2 pcsShelf Brackets 4 pcs 4 pcs 4 pcs 4 pcs 4 pcsStand 1pc - DV-21187 1pc - DV-21187 1pc - DV-21187 1pc - DV-21187 1pc - DV-21187Shelf and Brackets 1pc - 212246 1pc - DN-63-903 1pc - 212094 1pc - YSA0000026 1pc - DN-63-903External Communication Adaptor 1pc - RS232ODK18 1pc - RS232ODK18 1pc - RS232ODK18 1pc - RS232ODK18 1pc - RS232ODK18External Communication Terminal 1pc - RS232ODK19 1pc - RS232ODK19 1pc - RS232ODK19 1pc - RS232ODK19 1pc - RS232ODK19Temperature Output Board 1pc - 1020000055 1pc - 1020000055 1pc - 1020000054 1pc - 1020000054 1pc - 1020000054Temperature Output Terminal 1pc - ODK12 1pc - ODK12 1pc - ODK12 1pc - ODK12 1pc - ODK12

Fixed temperature operation, Quick auto stop, Auto stop, Auto start

- - - - - - - - - None - - - - - - - - -

Standard



Structure

PID control by microprocessor

Self diagnostic function, indpenedent overheat prevention, and key lock

PID control by microprocessorApprox. 90 min.

250 x 280, Tempered glass (3.0mm thickness)

Fixed temperature operation, Program operation, Auto start, Auto stop, Quick Auto-stop,

6 pattern programmable controller

Performance

- - - - - - - - - - - - - - - Natural convection - - - - - - - - - - - - - - -Room temperature +10° - 260° C Room temperature +5° - 300° C

± 1.0° C @ 210° C ± 1.0° C @ 300° C± 5.0° C @ 260° C ± 10° C @ 300° C


DX - 302DVS - 402

DVS - 602

24

2012.indd 25 6/28/2012 1:59:23 PM

CONVECTION OVENSDKN - 302/402C/412C/602C/612C/812C/912CDNE - 400/600/810/910DNF - 400/600/810/910

Overview

Advantages

Applications


Yamato’s forced convection ovens provide high temperature accuracy and uniformity. These convection ovens augment traditional ovens by circulating heated air using a Sci-roco type fan. Yamato ovens have long been known for their reliability and durability. Recently, Yamato has utilized their innovation to spearhead the “go green” movement by developing two different energy saving convection ovens, the DNE and DNF series.

High temperature uniformitySturdy and reliableVersatile

CuringBondingDryingAging

Details

DKN Series

DNE Series

DNF Series

The DKN ovens have built in exhaust ports which can be used for several different purposes, including the use of in-ternal temperature sensors (thermocouples) which use external temperature readers or recorders. Models DKN-302C, DKN-402C/412C, and DKN-602C/612C are fitted with observation windows so that the samples inside can be viewed at anytime. All DKN ovens are programmable.

The DNE series ovens are each equipped with a simple key input system and a multi-functional controller which makes usability much more user friendly. They achieve an energy-saving rate of 30 to 40% compared to other convection oven models. All DNE models have an external communcation device and temperature output terminal. The DNE-400 and DNE-600 models are stackable.

The DNF series ovens achieve an energy savings rate of 30-40% as well. These high performance “green” ovens are equipped with air velocity controls and exhaust dampers. Operability is also enhanced with the slider-type open/close adjustment knob on the front side of the main unit.

DKN DNE DNFHigh temperature uniformityObservation window (up to DKN-602)

Energy savings rate of 30-40%Max temperature of 260˚ CEnergy savings rate of 30-40%

DKN - 402CDKN - 602C

DKN - 812C

25

2012.indd 26 6/28/2012 1:59:23 PM


MODEL DKN - 302 DKN - 402C/412C DKN - 602C/612C DKN - 812C DKN - 912CCirculation Method

Temperature RangeRoom temperature +10° - 210° C

Temperature Control AccuracyTemperature Distribution Accuracy ± 2.5° C @ 210° CTemperature Controller PID control PID control PID control PID control PID controlTime to Reach Max. Temperature 90 min. 90 min. 90 min. 60 min. 60 min.Observation Window 180 x 180 250 x 280 250 x 280 None NoneControllerSafety Devices


560 x 601 x 820 mm or 22.1 x 23.7 x 32.3 in

710 x 651 x 870 mm or 28 x 25.6 x 34.3 in

710 x 651 x 1608 mm or 28 x 25.6 x 63.3 in

1180 x 651 x 1616 mm or 46.5 x 25.6 x 63.6 in


450 x 450 x 450 mm or 17.7 x 17.7 x 17.7 in

600 x 500 x 500 mm or 23.6 x 19.7 x 19.7 in

600 x 500 x 1000 mm or 23.6 x 19.7 x 39.4 in

1070 x 500 x 1000 mm or 42.1 x 19.7 x 39.4 in

Chamber Capacity 27 ℓ or 1.0 ft³ 90 ℓ or 3.2 ft³ 150 ℓ or 5.3 ft³ 300 ℓ or 10.6 ft³ 535 ℓ or 18.9 ft³Weight 35 kg or 112 lbs 50 kg or 185 lbs 65 kg or 220 lbs 110 kg or 292 lbs 190 kg or 607 lbsPower Supply - 115 V 7.5 Amps DKN -402C: 11 Amps DKN-602C: 14 Amps N/A N/APower Supply - 220 V N/A DKN-412C: 6 Amps DKN-612C: 7 Amps 15 Amps 18 AmpsShelves 2 pcs 2 pcs 2 pcs 4 pcs 8 pcsShelf Brackets 4 pcs 4 pcs 4 pcs 8 pcs 16 pcsStand 1pc - 211856 1pc - 211856 1pc - 211856 N/A N/AShelf and Brackets 1pc - 212094 1pc - 212246 1pc - DN-63-903 1pc - DN-63-903 1pc - 212490Communication Terminal 1pc - RS23200K19 1pc - RS23200K19 1pc - RS23200K19 1pc - RS23200K19 1pc - RS23200K19Temperature Output Terminal 1pc - ODK-12 1pc - ODK-12 1pc - ODK-12 1pc - ODK-12 1pc - ODK-12Communication Converter 1pc - RS2320DK18 1pc - RS2320DK18 1pc - RS2320DK18 1pc - RS2320DK18 1pc - RS2320DK18

- - - - - - - - - Self diagnostic function, indpenedent overheat prevention, and key lock - - - - - - - - -

Standard



Performance

Mechanical convection

Room temperature +10° - 260° C

± 1.0° C @ 210° C± 2.5° C @ 210° C with Damper closed; ± 2.8° C @ 260° C with Damper closed

Structure- - - - - - - - - 30 step, 3 pattern programmable controller with repeat function - - - - - - - - -

MODEL DNE - 400/410 DNE - 600/610 DNE - 810 DNE - 910Circulation MethodTemperature RangeTemperature Control AccuracyTemperature Distribution AccuracyTemperature Controller PID control by microprocessor PID control by microprocessor PID control by microprocessor PID control by microprocessorTime to Reach Max. Temperature 60 min. 60 min. 45 min. 60 min.Safety Devices


730 x 696 x 910 mm or 28.7 x 27.4 x 35.8 in

730 x 696 x 1675 mm or 28.7 x 27.4 x 65.9 in

1220 x 696 x 1675 mm or 48.0 x 27.4 x 65.9 in


600 x 500 x 500 mm or 23.6 x 19.7 x 19.7 in

600 x 500 x 1000 mm or 23.6 x 19.7 x 39.4 in

1090 x 500 x 1000 mm or 42.9 x 19.7 x 39.4 in

Chamber Capacity 90 ℓ or 3.2 ft³ 150 ℓ or 5.3 ft³ 300 ℓ or 10.6 ft³ 540 ℓ or 19.1 ft³Weight 60 kg or 132.3 lbs 76 kg or 167.6lbs 112 kg or 246.9 lbs 178 kg or 392.4 lbsPower Supply - AC 115 V DNE - 400: 11 Amps DNE - 600: 13 Amps N/A N/APower Supply - AC 220 V DNE - 410: 6 Amps DNE - 610: 7 Amps 12 Amps 15 AmpsShelves 2 pcs. 2 pcs. 4 pcs. 8 pcs.Shelf Brackets 4 pcs. 4 pcs. 8 pcs. 16 pcs.Stand Part No. 211856 Part No. 211856 N/A N/AShelf and Brackets Part No. 212246 Part No. DN-63-903 Part No. DN-63-903 Part No. 212490

Standard



- - - - - - - - - Self diagnostic function, indpenedent overheat prevention, and latched door - - - - - - - - -

Performance

Structure

Mechanical convectionRoom temperature +10° - 210° C

± 0.5° C @ 210° C± 2.0° C @ 210° C

MODEL DNF - 400/410 DNF - 600/610 DNF - 810 DNF - 910Circulation MethodTemperature RangeTemperature Control AccuracyTemperature Distribution AccuracyTemperature ControllerTime to Reach Max. Temperature 75 min. 75 min. 60 min. 75 min.Observation WindowSafety Devices


730 x 696 x 910 mm or 28.7 x 27.4 x 35.8 in

730 x 696 x 1675 mm or 28.7 x 27.4 x 65.9 in

1220 x 696 x 1675 mm or 48.0 x 27.4 x 65.9 in


600 x 500 x 500 mm or 23.6 x 19.7 x 19.7 in

600 x 500 x 1000 mm or 23.6 x 19.7 x 39.4 in

1090 x 500 x 1000 mm or 42.9 x 19.7 x 39.4 in

Chamber Capacity 90 ℓ or 3.2 ft³ 150 ℓ or 5.3 ft³ 300 ℓ or 10.6 ft³ 540 ℓ or 19.1 ft³Weight 61 kg or 134.5 lbs 77 kg or 169.8 lbs 113 kg or 249.1 lbs 180 kg or 396.8 lbsPower Supply - AC 115 V 11.7A 13.9A N/A N/APower Supply - AC 220 V 6.4A 7.3A 14A 16.4AShelves 2 pcs. 2 pcs. 4 pcs. 8 pcs.Shelf Brackets 4 pcs. 4 pcs. 8 pcs. 16 pcs.Stand Part No. 211856 Part No. 211856 N/A N/AShelf and Brackets Part No. 212246 Part No. DN-63-903 Part No. DN-63-903 Part No. 212490

± 2.5° C @ 260° C

None


Mechanical convection with air velocity control (manual slide type exhaust damper)Room temperature +10° - 260° C

PID control by microprocessor

- - - - - - Self diagnostic function and indpenedent overheat prevention - - - - - -

Performance

Structure

Standard


± 0.5° C @ 260° C

26

2012.indd 27 6/28/2012 1:59:23 PM

FINE OVENSDF - 410/610/811/1011DH - 411/611/811/1011

Overview

Advantages

Applications


Yamato’s fine ovens provide reliable high-performance for high temperature drying needs. All fine ovens are programmable and feature an easy-input digital display and control pad. Settings are inputted on a text-based interactive basis, and the scan feature fixes the setting information by a convenient jog-dial. Both the DF and DH series have high temperature accuracy and uniformity which is great for sensitive samples.

High temperature accuracy and uniformityEasy to read display panelsOverheat preventionSelf diagnosis capability increases safety

CuringBondingDryingSemiconductorsR&D LabsAging

Details

DF Series

DH Series

The DF series fine ovens are recognized for their sturdy structure and high temperature control and distribution accu-racy. All of the DF models are controlled by PID controllers.

The DH series models DH-411 and DH-611 have a higher maximum temperature of 360° C and the larger capacity models the DH-811 and DH-1011 have a maximum temperature of 300° C. All models have a temperature control ac-curacy of ± 0.2° C.

DF DH Higher maximum temperatureProgrammable

High maximum temperatureProgrammable

DF - 410DH - 611

27

2012.indd 28 6/28/2012 1:59:25 PM


MODEL DF - 410 DF - 610 DF - 811 DF - 1011Circulation MethodTemperature RangeTemperature Control AccuracyTemperature Distribution AccuracyTemperature ControllerTime to Reach Max. TemperatureObservation WindowControllerSafety Devices


1200 x 780 x 1000 mm or 47.2 x 30.7 x 39.3 in

1500 x 1015 x 1330 mm or 59.1 x 39.9 x 52.3 in

1700 x 1215 x 1530 mm or 66.9 x 47.8 x 60.2 in


600 x 600 x 600 mm or23.6 x 23.6 x 23.6 in

800 x 800 x 800 mm or31.5 x 31.5 x 31.5 in

1000 x 1000 x 1000 mm or39.3 x 39.3 x 39.3 in

Chamber Capacity 91 ℓ or 3.2 ft³ 216 ℓ or 7.6 ft³ 512 ℓ or 18.1 ft³ 1000 ℓ or 35.3 ft³Weight 78 kg or 172 lbs 109 kg or 240 lbs 160 kg or 353 lbs 230 kg or 507 lbsPower Supply (50/60 Hz) 220V single phase, 10 A 220V single phase, 14.6 A 3-phase 220V, 13.6 A 3-phase 220V, 18 AShelves 2 pcs 3 pcs 3 pcs 3 pcsShelf Brackets 4 pcs 6 pcs 6 pcs 6 pcsStand 1pc - 415461 1pc - 415463 N/A N/AShelf and Brackets 1pc - 211063 1pc - 211099 1pc - YSA0000071 1pc - YSA0000215External Communication Adaptor 1pc - ODF32 1pc - ODF32 1pc - ODF32 1pc - ODF32External Communication Terminal 1pc - ODF3240000 1pc - ODF3240000 1pc - ODF3240000 1pc - ODF3240000Observation Window Must be installed at factory Must be installed at factory N/A N/ATemperature Output Terminal 1pc - 211860 1pc - 211860 1pc -211860 1pc -211860


N/A

Standard


± 1.5° C @ 260° C ± 3.0° C @ 200° C

Structure

- - - - - - - - - - - PID control by microcomputer - - - - - - - - - - -Approx. 60min (to 260° C) Approx. 60min (to 200° C)

Performance

Forced convection and ventilation

Optional

Room temperature +15° - 200° C± 0.1° C @ 260° C ± 0.2° C @ 200° C

Fixed temperature operation, Automatic-start, Automatic-stop, Programmable (Max 16 segments)Self diagnostic function, indpenedent overheat prevention, key lock function and electric leakage breaker

Room temperature +10° - 260° C

MODEL DH - 411 DH - 611 DH - 811 DH - 1011Circulation MethodTemperature RangeTemperature Control AccuracyTemperature Distribution AccuracyTemperature ControllerTime to Reach Max. TemperatureObservation WindowControllerSafety Devices


1200 x 780 x 1000 mm or 47.2 x 30.7 x 39.4 in

1500 x 1015 x 1330 mm or 59.1 x 40.0 x 52.4 in

1700 x 1215 x 1530 mm or 66.9 x 47.8 x 60.2 in


600 x 600 x 600 mm or23.6 x 23.6 x 23.6 in

800 x 800 x 800 mm or31.5 x 31.5 x 31.5 in

1000 x 1000 x 1000 mm or39.4 x 39.4 x 39.4 in

Chamber Capacity 91 ℓ or 3.2 ft³ 216 ℓ or 7.6 ft³ 512 ℓ or 18.1 ft³ 1000 ℓ or 35.3 ft³Weight 78 kg or 172 lbs 109 kg or 240 lbs 160 kg or 353 lbs 230 kg or 507 lbsPower Supply (50/60 Hz) 220V single phase 220V single phase 3-phase 220V 3-phase 220V

12.7 Amps 18.2 Amps 20 Amps 27 AmpsShelves 2 pcs 3 pcs 3 pcs 3 pcsShelf Brackets 4 pcs 6 pcs 6 pcs 6 pcsStand 1pc - 415461 1pc - 415463 N/A N/AShelf and Brackets 1pc - 211063 1pc - 211099 1pc - YSA0000071 1pc - YSA0000215External Communication Adaptor 1pc - ODF32 1pc - ODF32 1pc - ODF32 1pc - ODF32External Communication Terminal 1pc - ODF3240000 1pc - ODF3240000 1pc - ODF3240000 1pc - ODF3240000Observation Window Must be installed at factory Must be installed at factory N/A N/ATemperature Output Terminal 1pc - 211860 1pc - 211860 1pc -211860 1pc -211860

Standard



N/A N/AFixed temperature operation, Automatic-start, Automatic-stop, Programmable (Max 16 segments)Self diagnostic function, indpenedent overheat prevention, key lock function and electric leakage breaker

Structure

- - - - - - - - - - - PID control by microcomputer - - - - - - - - - - -Approx. 80min (to 360° C) Approx. 60min (to 300° C)

Performance

Forced convection and ventilationRoom temperature +10° - 360° C Room temperature +15° - 300° C

± 0.2° C @ 360° C ± 0.2° C @ 300° C± 2.5° C @ 360° C ± 3.0° C @ 300° C

28

2012.indd 29 6/28/2012 1:59:25 PM

VACUUM OVENSADP - 200C/210C/300C/310CDP - 43C/63C

Overview

Advantages

Applications


Yamato’s vacuum ovens are designed to serve a variety of industrial or laboratory pro-duction needs, including drying, curing, aging, vacuum storage, component drying, and baking under vacuum conditions. The input system of Yamato vacuum ovens are logical and user friendly which enhances the overall user experience and enables trouble-free replication of any experiment.

Vacuum pump can be stored in the holderEasy input of parameters and settingsEquipped with interactive key input device and graphic monitorEnriched safety measures, including a self-diagnostic function Independent overheat prevention deviceEasy maintanence

CuringBondingDryingAgingSterilizing

Details

ADP Series

DP Series

The ADP series is perfect for drying that requires a conditions that has decreased amounts of oxygen. The ADP series ovens are customizable with nitrogen gas inlet and communication ports.

The DP series is great for laboratories that need larger sized vacuum ovens. This series is built with storage space under the oven perfect for vacuum pumps and instruction manuals. Just like the ADP series the DP ovens are ideal for dry-ing that requires a conditions that has decreased amounts of oxygen. The DP series ovens are also customizable with nitrogen gas inlet and communication ports.

ADP DP Larger capacityStorage space under oven

Capacity for smaller sample sizesCompact and easy to fit anywhere

DP - 43DP - 63

29

2012.indd 30 6/28/2012 1:59:26 PM


MODEL ADP - 200C/210C ADP - 300C/310C DP - 43C DP - 63CCirculation MethodTemperature RangeTemperature Control AccuracyOperating pressoure rangeTemperature ControllerTime to Reach Max. Temperature Approx. 70min. Approx. 100min. Approx. 80min. Approx. 120min.Observation Window Yes Yes Yes Yes

Controller

Safety Devices

External Dimensions 400x 411 x 580 mm 500 x 463 x 684 mm 670 x 669 x 1500 mm 820 x 819 x 1650 mm or 32.3 x 32.2 x 65.0 in


300 x 300 x 300 mm or11.8 x 11.8 x 11.8 in

450 x 450 x 450 mm or17.7 x 17.7 x 17.7 in

600 x 600 x 600 mm or23.6 x 23.6 x 23.6 in

Chamber Capacity 10 ℓ or .35 ft³ 27 ℓ or 1 ft³ 91 ℓ or 3.2 ft³ 216 ℓ or 7.6 ft³Weight 30 kg or 66 lbs 30 kg or 121 lbs 190 kg or 419 lbs 290 kg or 639 lbsPower Supply - AC 115 V ADP-200C: 7 Amps ADP-300C: 10 Amps N/A N/APower Supply - AC 220 V ADP-210C: 4 Amps ADP-310C: 5.5 Amps 11 Amps 17 AmpsShelves 2 pcs 3 pcs 2 pcs 2 pcsShelf Brackets N/A N/A 4 pcs 4 pcsStand Part No. DV-21187 Part No. DV-21187 N/A N/AShelf and Brackets Part No. ADP21-4038 Part No. ADP31-4038 Part No. DP41-11 Part No. DP61-11Communication Converter Part No. RS232ODK18 Part No. RS232ODK18 Part No. 212893 Part No. 212893Communication Terminal Part No. RS232ODK19 Part No. RS232ODK19 Part No. 212892 Part No. 212892Temperature Output Board Part No. 1020000054 Part No. 1020000054 Part No. DP-43-0065A Part No. DP-43-0065ATemperature Output Terminal Part No. ODK12 Part No. ODK12 Part No. ODP30 Part No. ODP30


± 1° C @ 200° C

Fixed temperature operation, automatic-start, and automatic-stop

Fixed temperature operation, automatic-start, automatic-stop, program operation (Max 16 segments)

101 ~ 0.1 kPa (760~1 Torr) at absolute pressoure


101 ~ 0.1 kPa (760~1 Torr) at absolute pressure

Structure

ON/OFF, PID control by microcomputer - - - - - - PID control by microcomputer - - - - - -

- - - - - - - - - - Over current earth leakage breaker, Dual overheating prevention function - - - - - - - - - -

PerformanceRoom temperature +5° to 240° C Room temperature +10° to 200° C

± 1.5° C @ 240° C

Vacuum drying by decompressed chamber direct heating

Standard

Additional AcessoriesAsk your customer representative for the appropriate vacuum pump. Select between two different connecting kits; rubber hose versus stainless steel hose.

Select your connecting kit by assessing the corosiveness of the sample you will put in-side the vacuum oven. If it is corosive at all; the stainless steel connecting kit is highly recommended.

Vacuum Pump

Connecting Kits

30

2012.indd 31 6/28/2012 1:59:26 PM

Yamato Scientific America, Inc.925 Walsh AvenueSanta Clara, CA 95050, USAPhone: 408-235-7725Toll Free: 1-800-2-YAMATO

www.yamato-usa.com

Yamato Scientific Latin America18 Calle 24-69 Zona 10Empresarial Zona Pradera Torre III Nivel 17 Oficina 1706GuatemalaTelefono: 011(502)2261-7359Fax: 408-235-7730

2012.indd 32 6/28/2012 1:59:26 PM

Date post:	25-Jun-2018
Category:	Documents
Upload:	lykiet
View:	228 times
Download:	0 times

PRODUCT CATALOG - taurusinctaurusinc.co.in/Yamato Scientific Catalog.pdf · Overview Advantages...

Documents