Product catalogue - 2017€¦ · 09 281 1865 • [email protected] • Catalogue 2017 Section 1...

Product catalogue - 2017

www.aquasales.co.nz

www.aquasales.co.nz

Motorised Ball ValveSecion 16

pH ControllerSection 8

Solenoid Metering PumpSection 1

Motor Driven Metering PumpSection 4

Centrifugal Chemical PumpSection 6

Air Operated Chemical PumpSection 7

Ultrasonic Level SensorSection 18

RotameterSection 17

Double Union PVC ValveSection 16

CATALOGUE—2017

2017

PO BOX 300-596, ALBANY, AUCKLAND 0752, NEW ZEALAND 09 281 1865 [email protected]

SECTION 1 SOLENOID METERING PUMPS

SECTION 2 PERISTALTIC METERING PUMPS

SECTION 3 PNEUMATIC METERING PUMPS

SECTION 4 MOTOR DRIVEN METERING PUMPS

SECTION 5 METERING PUMP ACCESSORIES

SECTION 6 CENTRIFUGAL CHEMICAL PUMPS

SECTION 7 AIR OPERATED DOUBLE DIAPHRAGM PUMPS

SECTION 8 MEASUREMENT & CONTROL

SECTION 9 CHLORINE DIOXIDE GENERATORS

SECTION 10 WATER SOFTENERS

SECTION 11 REVERSE OSMOSIS

SECTION 12 DEMINERALISERS

SECTION 13 ULTRAVIOLET DISINFECTION

SECTION 14 CHEMICAL MIXERS

SECTION 15 FILTRATION

SECTION 16 VALVES

SECTION 17 FLOW

SECTION 18 LEVEL

SECTION 19 PRESSURE

SECTION 20 TESTING

SECTION 21 RESIN & MEDIA

SECTION 22 EMEC PUMP SPARE PARTS

SECTION 23 ASSEMBLIES

CONTENTS

CONTENTS

Contents

09 281 1865 • [email protected] • www.aquasales.co.nz


Catalogue 2017

Section 1Solenoid Metering PuMPS 1CATALOGUE—2017

2017


INDEX

K SERIES METERING PUMPS, 0-18LPH PAGE 1

KA SERIES METERING PUMPS, 0-13LPH, SELF VENTING PAGE 2

KMS SERIES METERING PUMPS, 0-18LPH PAGE 3

KMSA SERIES METERING PUMPS, 0-13LPH, SELF VENTING PAGE 4

KMS LPV SERIES METERING PUMPS, 0-18LPH, VISCOUS MEDIA PAGE 5

AMS SERIES METERING PUMPS, 0-60LPH PAGE 6

AMSA SERIES METERING PUMPS, 0-38.5 LPH, SELF VENTING PAGE 7

AMS DIGITAL METERING PUMPS, 0-60LPH PAGE 8

AMSA DIGITAL SERIES METERING PUMPS, 0-38.5LPH, SELF VENTING PAGE 9

AMS LPV SERIES METERING PUMPS, 0-60LPH, VISCOUS MEDIA PAGE 10

AMS P SERIES METERING PUMPS, 0-40LPH, HIGHLY VISCOUS MEDIA PAGE 11

T SERIES METERING PUMPS, 0-100LPH WALL MOUNTING PAGE 12

TA SERIES METERING PUMPS, 0-35LPH, SELF VENTING PAGE 13

T-P SERIES METERING PUMPS, 0-25LPH, WALL MOUNTING, VISCOUS MEDIA PAGE 14

V SERIES METERING PUMPS, 0-17LPH, WALL MOUNTING PAGE 15

VA SERIES METERING PUMPS, 0-13.5LPH, WALL MOUNTING, SELF VENTING PAGE 16

VMS SERIES METERING PUMPS, 0-17LPH, WALL MOUNTING PAGE 17

VMSA SERIES METERING PUMPS, 0-13.5LPH, WALL MOUNTING, SELF VENTING PAGE 18

WD SERIES SWIMMING POOL PUMPS WITH CONTROLLERS PAGE 19

WTC SERIES COOLING TOWER PUMPS WITH CONTROLLERS PAGE 20

F SERIES METERING PUMPS, 0-16LPH PAGE 21

SECTION 1—SOLENOID METERING PUMPS

Section 1 - Index Page

Section 1Solenoid Metering PuMPS


Catalogue 2017

1 CATALOGUE SECTION 1 — SOLENOID METERING PUMPS


2017 SECTION 1 PAGE 1

STANDARD FEATURES: MICROPROCESSOR TECHNOLOGY ANALOGUE CONTROLS STROKE LENGTH ADJUSTMENT 0-100% STROKE RATE ADJUSTMENT 0-100% HOUSING IN POLYPROPYLENE LIQUID END AND ACCESSORIES IN PVDF LEVEL OF PROTECTION IP65 2 YEAR WARRANTY*

PUMP SIZES:

Model Pressure (max) Bar Flow l/h Cc/Stroke Valve Size

BSP Tube Size

IDxOD

2001 20 1 0.10 3/8’ 4x6

1802 18 2 0.19 3/8” 4x6

1504 15 4 0.37 3/8” 4x6

1005 10 5 0.46 3/8” 4x6

0808 8 8 0.74 3/8” 4x6

0510 5 10 0.93 3/8” 4x6

0501 5 1 0.09 3/8” 4x6

0218 2 18 1.67 1/2” 6x8

PUMP MODELS: KCO PLUS Manual setup (Constant pump with stroke speed and stroke length adjustment), ÷10 function.

KCL PLUS Manual setup, with level probe input, ÷10 function.

KPLUS Manual setup plus input signals 4-20mA, 0-20mA or pulse with built in multiplier or divider function.

EMEC K SERIES METERING PUMPS

PUMP OPTIONS: Liquid end, valves and O-rings in alternative materials, alternative voltages, liquid ends for viscous media, selection of colours, compressed air driven option.

* Please refer to ‘Aqua Products Limited’ terms and conditions of sale for complete warranty conditions.

The K series metering pumps provide a high quality option for metering chemicals into industrial processes at competitive prices. K series pumps feature micro-processor control and double ball valves for accuracy, and the integral bleed assists with priming. A range of input signals can be used depending on the model (see below).

All pumps are supplied with suction tubing, discharge tubing, foot-valve and injection valve. A low level float switch and pacing cables are also included where relevant.

Page 1 - Section 1


Catalogue 2017

Section 1Solenoid Metering PuMPS 1CATALOGUE SECTION 1 — SOLENOID METERING PUMPS



EMEC KA SERIES SELF VENTING METERING PUMPS


The KA series metering pumps have a self venting liquid end fitted. For medias that emit gasses, the self priming function ensures reliable metering. KA series pumps feature micro-processor control and double ball valves for accuracy. A range of input signals can be used depending on the model (see below).

All pumps are supplied with suction tubing, discharge tubing, foot-valve and injection valve. A low level float switch in PVDF and pacing cables are also included where relevant.

PUMP SIZES: Model Pressure

(max) Bar Flow l/h Cc/Stroke Valve Size BSP

Tube Size IDxOD

1801 18 1 0.10 3/8” 4x6

1503 15 3 0.28 3/8” 4x6

1003.5 10 3.5 0.32 3/8” 4x6

1000.5 10 0.5 0.05 3/8’ 4x6

0805.5 8 5.5 0.51 3/8” 4x6

0507.5 5 7.5 0.69 3/8” 4x6

0213 2 13 1.20 1/2” 6x8

PUMP MODELS: KACO PLUS Manual setup (Constant output pump with stroke speed and stroke length adjustment).

KACL PLUS Manual setup, with level probe input.

KAPLUS Manual setup plus input signals 4-20mA, 0-20mA or pulse with built in multiplier or divider function.

PUMP OPTIONS: Liquid ends, valves and O-rings in alternative materials, alternative voltages, liquid ends for viscous media, selection of colours, compressed air driven option.


Section 1 - Page 2



Catalogue 2017




The KMS series metering pumps provide a high quality option with digital controls. These pumps provide advanced features and control options. KMS series pumps feature micro-processor control and double ball valves for accuracy, and the integral bleed assists with priming. A range of input signals can be used depending on the model (see below). All pumps are supplied with suction and discharge tubing, foot-valve and injection valve, and low level float switch in PVDF. Pacing cables are also included where relevant.

EMEC KMS DIGITAL SERIES METERING PUMPS

STANDARD FEATURES: MICROPROCESSOR TECHNOLOGY DIGITAL DISPLAY DIGITAL CONTROLS STROKE LENGTH ADJUSTMENT 0-100% STROKE RATE ADJUSTMENT 1SPH—180SPM HOUSING IN POLYPROPYLENE LIQUID END AND ACCESSORIES IN PVDF LEVEL OF PROTECTION IP65 2 YEAR WARRANTY*



Tube Size IDxOD

2001 20 1 0.10 3/8’ 4x6

1802 18 2 0.19 3/8” 4x6

1504 15 4 0.37 3/8” 4x6

1005 10 5 0.46 3/8” 4x6

0808 8 8 0.74 3/8” 4x6

0510 5 10 0.93 3/8” 4x6

0501 5 1 0.09 3/8” 4x6

0218 2 18 1.67 1/2” 6x8

PUMP MODELS: KMS DC Constant output pump, stroke length and stroke rate adjustment, standby input, alarm output, level control.

KMS MF Multifunction pump. Modes: constant, pulse divide, multiply, PPM, batch, Volt, mA, %, ml/q, standby input, flow sensor input, alarm output, level control.

KMS CL Digital pump with built in Chlorine controller, direct probe connection, proportional action.

KMS EN Digital pump with built in Timer, LCD display, level probe.

KMS PH Digital pump with built in pH controller, direct probe connection, proportional action.

KMS RH Digital pump with built in ORP controller, direct probe connection, proportional action.


Page 3 - Section 1


Catalogue 2017




The KMSA series metering pumps provide a high quality metering pump with digital controls and a self venting head. These pumps provide advanced features and control options. KMSA series pumps feature micro-processor control and double ball valves for accuracy, and have a self venting liquid end fitted. For medias that emit gasses, the self venting function ensures reliable metering. A range of input signals can be used depending on the model (see below). All pumps are supplied with suction and discharge tubing, foot-valve and injection valve, and low level float switch in PVDF. Pacing cables are also included where relevant.

EMEC KMSA DIGITAL SELF VENTING SERIES METERING PUMPS

STANDARD FEATURES: MICROPROCESSOR TECHNOLOGY DIGITAL DISPLAY DIGITAL CONTROLS STROKE LENGTH ADJUSTMENT 0-100% STROKE RATE ADJUSTMENT 1SPH—180SPM HOUSING IN POLYPROPYLENE LIQUID END AND ACCESSORIES IN PVDF LEVEL OF PROTECTION IP65 2 YEAR WARRANTY*

PUMP SIZES:

PUMP MODELS: KMSA DC Constant output pump, stroke length and stroke rate adjustment, standby input, alarm output, level control.

KMSA MF Multifunction pump. Modes: constant, pulse divide, multiply, PPM, batch, Volt, mA, %, ml/q, standby input, flow sensor input, alarm output, level control.

KMSA CL Digital pump with built in chlorine controller, direct probe connection, proportional action.

KMSA EN Digital pump with built in 7 day timer, LCD display, level probe.

KMSA PH Digital pump with built in pH controller, direct probe connection, proportional action.

KMSA RH Digital pump with built in ORP controller, direct probe connection, proportional action.


BSP Tube Size

IDxOD

1801 18 1 0.10 3/8” 4x6

1503 15 3 0.28 3/8” 4x6

1003.5 10 3.5 0.32 3/8” 4x6

1000.5 10 0.5 0.05 3/8’ 4x6

0805.5 8 5.5 0.51 3/8” 4x6

0507.5 5 7.5 0.69 3/8” 4x6

0213 2 13 1.20 1/2” 6x8


Section 1 - Page 4



Catalogue 2017




STANDARD FEATURES: MICROPROCESSOR TECHNOLOGY DIGITAL CONTROLS STROKE LENGTH ADJUSTMENT 0-100% STROKE RATE ADJUSTMENT 0-100% HOUSING IN POLYPROPYLENE LIQUID END IN PMMA LEVEL OF PROTECTION IP65 2 YEAR WARRANTY*

EMEC KMS-LPV SERIES METERING PUMPS FOR VISCOUS MEDIA (UP TO 8000CPS)

The KMS series metering pumps are a robust high quality pump with advanced features and control options. KMS-LPV series pumps feature dosing heads that are modified to handle viscous media up to 8000cPs. A range of input signals can be used depending on the model (see below). All pumps are supplied with suction and discharge tubing and an injection valve, Pacing and alarm cables are also included where relevant.


(max) Bar Flow l/h Cc/stroke Valve size BSP

Suction Hose

Injection Hose

1802 18 2 0.19 3/8” 16x22 8x12

1504 15 4 0.37 3/8” 16x22 8x12

1005 10 5 0.46 3/8” 16x22 8x12

0808 8 8 0.74 3/8” 16x22 8x12

0510 5 10 0.93 3/8” 16x22 8x12

0218 2 18 1.67 1/2” 16x22 8x12

PUMP MODELS:


K CO PLUS LPV Manual setup (Constant pump with stroke speed and stroke length adjustment), ÷10 function.

K CL PLUS LPV Manual setup, with level probe input, ÷10 function.

K PLUS LPV Manual setup plus input signals 4-20mA, 0-20mA or pulse with built in multiplier or divider function.

KMS DC LPV Digital constant output pump, standby input, alarm output, level control.

KMS MF LPV Multifunction pump. Modes: constant, pulse divide, multiply, PPM, batch, Volt, mA, %, ml/q, standby input, flow sensor input, alarm output, level control.

KMS EN LPV Digital pump with built in digital 7 day Timer, LCD display and level probe.

KMS CL LPV Digital pump with built in Chlorine controller, direct probe connection, proportional action.

KMS PH LPV Digital pump with built in pH controller, direct probe connection, proportional action.

KMS RH LPV Digital pump with built in ORP controller, direct probe connection, proportional action.

Valves and O-rings in alternative materials, alternative voltages, selection of colours, compressed air driven option.

Page 5 - Section 1


Catalogue 2017




The AMS analogue series metering pumps are similar in function to the K series, but for larger applications. The AMS analogue series features microprocessor control for accuracy, manual stroke rate and stroke length adjustment and a range of process input signals depending on the model.


EMEC AMS SERIES METERING PUMPS


PUMP SIZES:


BSP Suction Tube

Size IDxOD

Discharge Tube Size

IDxOD

2505 25 5 0.7 3/8” 4x6 4x6

1510 15 10 1.4 3/8” 4x6 4x6

1015 10 15 2.1 1/2” 6x8 6x8

0720 7 20 2.8 1/2” 6x8 6x8

0340 3 40 5.6 3/4” 8x12 8x10

0260 2 60 7.7 3/4” 8x12 8x10

PUMP MODELS: AMS CO PLUS Manual setup (Constant output pump with stroke speed and stroke length adjustment), ÷10 function.

AMS CL PLUS Manual setup with level control, ÷10 function.

AMS PLUS Manual setup plus signal input 4-20mA, 0-20mA or pulse input, with built in multiply or divide function.

PUMP OPTIONS: Liquid ends, valves and O-rings in alternative materials, alternative voltages, liquid ends for viscous media, selection of colours, compressed air powered option.


Section 1 - Page 6



Catalogue 2017




The AMS analogue series metering pumps are similar in function to the K series, but for larger applications. The AMSA is the same as the AMS, but features a self venting function, to ensure reliable operation with liquids that emit gasses.


EMEC AMSA SELF VENTING SERIES METERING PUMPS


PUMP SIZES:


BSP Suction Tube

Size IDxOD

Discharge Tube Size

IDxOD

2503.2 25 3.2 0.44 3/8” 4x6 4x6

1506 15 6 0.83 3/8” 4x6 4x6

1010 10 10 1.40 1/2” 6x8 6x8

0713 7 13 1.81 1/2” 6x8 6x8

0330 3 30 4.17 3/4” 8x12 8x10

0238.5 2 38.5 5.35 3/4” 8x12 8x10

PUMP MODELS: AMSA CO PLUS Manual setup (Constant output pump with stroke speed and stroke length adjustment), ÷10 function.

AMSA CL PLUS Manual setup with level control, ÷10 function.

AMSA PLUS Manual setup plus signal input 4-20mA, 0-20mA or pulse input, with built in multiply or divide function.

PUMP OPTIONS: Liquid ends, valves and O-rings in alternative materials, liquid ends for viscous media, alternative voltages, selection of colours, compressed air powered option.


Page 7 - Section 1


Catalogue 2017




The AMS digital series metering pumps feature smart microprocessor controls, providing outstanding accuracy with quartz timing, and EEPROM storage of data and settings during power outages. An LCD display is utilised for display of measured values, stroking rates, and assists with pump setup and calibration functions. A variety of input signals can be accepted depending on the model (see below).

All pumps are supplied with suction and discharge tubing, foot-valve, injection valve, and low level float switch in PVDF. Pacing cables are also included where relevant.

EMEC AMS DIGITAL SERIES METERING PUMPS

STANDARD FEATURES: MICROPROCESSOR TECHNOLOGY DIGITAL DISPLAY DIGITAL CONTROLS STROKE LENGTH ADJUSTMENT 0-100% STROKE RATE ADJUSTMENT 0-100% HOUSING IN POLYPROPYLENE LIQUID END AND ACCESSORIES IN PVDF LEVEL OF PROTECTION IP65 2 YEAR WARRANTY*

PUMP SIZES:


BSP Suction Tube

Size IDxOD

Discharge Tube Size

IDxOD

2505 25 5 0.7 3/8” 4x6 4x6

1510 15 10 1.4 3/8” 4x6 4x6

1015 10 15 2.1 1/2” 6x8 6x8

0720 7 20 2.8 1/2” 6x8 6x8

0340 3 40 5.6 3/4” 8x12 8x10

0260 2 60 7.7 3/4” 8x12 8x10

PUMP MODELS: AMS MF Multifunction pump, Modes: constant, pulse divide, multiply, PPM, batch, Volt, mA, %, ml/q, standby input,

flow sensor input, alarm output, level control.

AMS PH Digital pump with built in pH controller, direct probe connection, proportional action, including level probe.

AMS RH Digital pump with built in ORP controller, direct probe connection, proportional action, including level probe.

PUMP OPTIONS: Liquid ends, valves and O-rings in alternative materials, liquid ends for high viscosity, alternative voltages.


Section 1 - Page 8



Catalogue 2017




The AMSA digital series metering pumps feature smart microprocessor controls, providing outstanding accuracy with quartz timing. An LCD display is utilised for display of measured values, stroking rates, and assists with pump setup and calibration functions. A variety of input signals can be accepted depending on the model (see below). The AMSA series metering pumps have a self venting liquid end fitted. For medias that emit gasses, the self priming function ensures reliable metering. All pumps are supplied with suction and discharge tubing, foot-valve, injection valve, and low level float switch in PVDF. Pacing cables are also included where relevant.

EMEC AMSA DIGITAL SELF VENTING SERIES METERING PUMPS

STANDARD FEATURES: MICROPROCESSOR TECHNOLOGY DIGITAL DISPLAY DIGITAL CONTROLS STROKE LENGTH ADJUSTMENT 0-100% STROKE RATE ADJUSTMENT 0-100% HOUSING IN POLYPROPYLENE LIQUID END AND ACCESSORIES IN PVDF LEVEL OF PROTECTION IP65 2 YEAR WARRANTY*

PUMP SIZES:


BSP Suction Tube

Size IDxOD

Discharge Tube Size

IDxOD

2503.2 25 3.2 0.44 3/8” 4x6 4x6

1506 15 6 0.83 3/8” 4x6 4x6

1010 10 10 1.4 1/2” 6x8 6x8

0713 7 13 1.81 1/2” 6x8 6x8

0330 3 30 4.17 3/4” 8x12 8x10

0238.5 2 38.5 5.35 3/4” 8x12 8x10

PUMP MODELS: AMSA MF Multifunction pump, Modes: constant, pulse divide, multiply, PPM, batch, Volt, mA, %, ml/q, standby

input, flow sensor input, alarm output, level control.

AMSA PH Digital pump with built in pH controller, direct probe connection, proportional action, including level probe.

AMSA RH Digital pump with built in ORP controller, direct probe connection, proportional action, including level probe.

PUMP OPTIONS: Alternative voltages. Alarm relay for remote low chemical indication, range of colours, liquid ends, valves and O-rings in alternative materials.


Page 9 - Section 1


Catalogue 2017




EMEC AMS - LPV SERIES METERING PUMPS FOR VISCOUS MEDIA (UP TO 8,000CPS)

STANDARD FEATURES: MICROPROCESSOR TECHNOLOGY DIGITAL CONTROLS STROKE LENGTH ADJUSTMENT 0-100% STROKE RATE ADJUSTMENT 0-100% HOUSING IN POLYPROPYLENE LIQUID END IN PMMA LEVEL OF PROTECTION IP65 2 YEAR WARRANTY*



Suction Hose

Injection Hose

2505 25 5 0.7 3/4” 16x22 8x12

1510 15 10 1.4 3/4” 16x22 8x12

1015 10 15 2.1 3/4” 16x22 8x12

0720 7 20 2.8 3/4” 16x22 8x12

0340 3 40 5.6 3/4” 16x22 8x12

0260 2 60 7.7 3/4” 16x22 8x12

PUMP MODELS:

The AMS series metering pumps provide a high quality option with digital controls. These pumps provide advanced features and control options. AMS-LPV series pumps feature dosing heads that are modified to handle viscous media up to 8000cPs. A range of input signals can be used depending on the model (see below). All pumps are supplied with suction and discharge tubing and injection valve. Pacing and alarm cables are also included where relevant. Note: Flow may change according to viscosity. Indicated flow rates measured with water.

Liquid ends, valves and O-rings in alternative materials, alternative voltages, selection of colours. PUMP OPTIONS:


AMS CO PLUS LPV Manual setup (Constant pump with stroke speed and stroke length adjustment) ÷10 function.

AMS CL PLUS LPV Manual setup, with level probe input, ÷10 function.

AMS PLUS LPV Manual setup, plus input signals 4-20mA, 0-20mA or pulse with built in multiplier or divider function.

AMS MF LPV Multifunction pump. Modes: constant, pulse divide, multiply, PPM, batch, Volt, mA, %, ml/q, standby input, flow sensor input, alarm output, level control.

AMS PH LPV Digital pump with built in pH controller, direct probe connection, proportional action.

AMS RH LPV Digital pump with built in ORP controller, direct probe connection, proportional action.

Section 1 - Page 10



Catalogue 2017




The AMSP series metering pumps are specifically designed for handling very high viscosity liquids. A variety of input signals can be accepted depending on the model (see below).

EMEC AMS-P SERIES METERING PUMPS FOR VISCOUS MEDIA (UP TO 50,000CPS)

STANDARD FEATURES: MICROPROCESSOR TECHNOLOGY ANALOGUE CONTROLS STROKE LENGTH ADJUSTMENT 0-100% STROKE RATE ADJUSTMENT 0-100% HOUSING IN POLYPROPYLENE LIQUID END IN PMMA LEVEL OF PROTECTION IP65 2 YEAR WARRANTY*


(max) Bar Flow l/h Cc/Stroke Suction Hose

Discharge Hose

0802 8 2 0.28 20x27 16x22

0604 6 4 0.56 20x27 16x22

0410 4 10 1.4 20x27 16x22

0225 2 25 3.5 20x27 16x22

0140 1 40 5.6 20x27 16x22

PUMP MODELS: AP CO PLUS Manual setup (constant output pump with stroke speed and stroke length adjustment), ÷10 function.

AP PLUS Manual setup, plus level control, signal input 4-20mA or 0-20mA or pulse input, with built in multiply or divide function.

AMSP MF Multifunction pump, Modes: constant, pulse divide, multiply, PPM, batch, Volt, mA, %, ml/q, standby input, flow sensor input, alarm output, level control.

AMSP PH Digital pump with built in pH controller, direct probe connection, proportional action.

AMSP RH Digital pump with built in redox controller, direct probe connection, proportional action.

PUMP OPTIONS: Valves and O-rings in alternative materials, alternative voltages, selection of colours.

*Please refer to ‘Aqua Products Limited’ terms and conditions of sale for complete warranty conditions.

Page 11 - Section 1


Catalogue 2017




PUMP SIZES:

EMEC T SERIES METERING PUMPS

STANDARD FEATURES: WALL MOUNTING MICROPROCESSOR TECHNOLOGY ANALOGUE OR DIGITAL CONTROL OPTIONS STROKE RATE ADJUSTMENT 0-100% HOUSING IN POLYPROPYLENE LIQUID END IN PVDF LEVEL OF PROTECTION IP65 2 YEAR WARRANTY*

The T series metering pumps provide a simple, economical solution for larger applications, in a convenient wall mounting option. All pumps are supplied with suction and discharge tubing, foot-valve and injection valve. Pacing cables and low level chemical floats are also included where relevant.

Model Pressure (max) Bar Flow l/h Cc/Stroke Suction

Hose Discharge

Hose

2005 20 5 0.7 4x6 4x6

0515 5 15 2.1 6x8 6x8

0420 4 20 2.8 6x8 6x8

0330 3 30 4.2 8x12 8x10

0150 1 50 7 8x12 8x10

00100 0 100 14 12x18 12x18

PUMP MODELS: T CO Analogue pump (constant output pump with stroke speed adjustment).

T CL Analogue pump (constant output pump with stroke speed adjustment), with level control.

TMS DC Digital pump with stroke speed control, standby input, alarm output and low level float switch.

TMS MF Digital pump, multifunction, with stroke speed control. Modes: constant, divide, multiply, PPM, batch, volts, mA, %, ml/q, level control and optional alarm output.

TMS PH Digital pump with built in pH controller, proportional control action, level control.

TMS RH Digital pump with built in ORP controller, proportional control action, level control.

PUMP OPTIONS: Alternative voltages, liquid ends, valves and O-rings in alternative materials.


Section 1 - Page 12



Catalogue 2017




EMEC TA SELF VENTING SERIES METERING PUMPS

STANDARD FEATURES: WALL MOUNTING MICROPROCESSOR TECHNOLOGY ANALOGUE OR DIGITAL CONTROL OPTIONS STROKE RATE ADJUSTMENT 0-100% HOUSING IN POLYPROPYLENE LIQUID END IN PVDF LEVEL OF PROTECTION IP65 2 YEAR WARRANTY*

PUMP SIZES:

The T series metering pumps provide a simple, economical solution for larger applications, in a convenient wall mounting option. All pumps are supplied with suction and discharge tubing, foot-valve and injection valve. Pacing cables and low level chemical floats are also included where relevant.


Hose Discharge

Hose

2003.2 20 3.2 0.44 4x6 4x6

0510 5 10 1.39 6x8 6x8

0413 4 13 1.8 6x8 6x8

0320 3 20 2.7 8x12 8x10

0135 1 35 7.4 8x12 8x10

PUMP MODELS: TA CO Analogue pump (constant output pump with stroke speed adjustment).

TA CL Analogue pump (constant output pump with stroke speed adjustment), with level control.

TMSA DC Digital pump with stroke speed control, standby input, alarm output and low level float switch.

TMSA MF Digital pump, multifunction, with stroke speed control. Modes: constant, divide, multiply, PPM, batch, volts, mA, %, ml/q, level control and optional alarm output.

TMSA PH Digital pump with built in pH controller, proportional control action, level control.

TMSA RH Digital pump with built in ORP controller, proportional control action, level control.

PUMP OPTIONS: Alternative voltages, liquid ends, valves and O-rings in alternative materials.


Page 13 - Section 1


Catalogue 2017




PUMP SIZES:

EMEC T-P SERIES METERING PUMPS FOR VISCOUS MEDIA (UP TO 50,000CPS)

STANDARD FEATURES: WALL MOUNTING MICROPROCESSOR TECHNOLOGY ANALOGUE OR DIGITAL CONTROL OPTIONS STROKE RATE ADJUSTMENT 0-100% HOUSING IN POLYPROPYLENE LIQUID END IN PMMA LEVEL OF PROTECTION IP65 2 YEAR WARRANTY*

The T-P series metering pumps are fitted with a high viscosity liquid end, to handle liquids up to 50,000cPs.


Hose Discharge

Hose

0601 6 1 0.14 20x27 16x22

0403 4 3 0.42 20x27 16x22

0208 2 8 1.2 20x27 16x22

0120 1 20 2.8 20x27 16x22

0.525 0.5 25 3.5 20x27 16x22

PUMP MODELS: TP CO Analogue pump (constant output pump with stroke speed adjustment).

TMSP DC Digital pump with stroke speed control, and low level float switch.

TMSP MF Digital pump, multifunction, with stroke speed control. Modes: constant, divide, multiply, PPM, batch, volts, mA, %, ml/q, level control and optional alarm output.

TMSP PH Digital pump with built in pH controller, proportional control action, level control.

TMSP RH Digital pump with built in ORP controller, proportional control action, level control.


Section 1 - Page 14



Catalogue 2017




PUMP SIZES:

STANDARD FEATURES: WALL MOUNTING ANALOGUE CONTROLS STROKE RATE ADJUSTMENT 0-100% HOUSING IN POLYPROPYLENE LIQUID ENDS AND ACCESSORIES IN PVDF LEVEL OF PROTECTION IP65 2 YEAR WARRANTY*

The V series metering pumps provide effective metering in an economical wall mounting format. These units are commonly used in swimming pools, heating and cooling systems, and on rural water supplies. All pumps are supplied with suction tubing, discharge tubing, foot-valve and injection valve. A low level float switch and pacing cables are also included where relevant.

PUMP MODELS: V CO Constant output pump with stroke speed adjustment.

V CL Constant output pump with stroke speed adjustment, with level control.

V PVM Pump with external pulse signal input and pulse multiplier/divider function.


Model Pressure (max) Bar Flow l/h Cc/Stroke Tube Size IDxOD

2001 20 1 0.1 4x8

1802 18 2 0.19 4x8

1804 18 4 0.37 4x8

1502 15 2 0.19 4x6

1504 15 4 0.37 4x6

1505 15 5 0.46 4x6

1004 10 4 0.37 4x6

1005 10 5 0.46 4x6

1010 10 10 0.93 4x6

0706 7 6 0.56 4x6

0510 5 10 0.93 4x6

0512 5 12 1.11 4x6

0501 5 1 0.1 4x6

0408 4 8 0.74 4x6

0310 3 10 0.93 4x6

0217 2 17 1.57 6x8

0116 1 16 1.48 6x8

PUMP OPTIONS: Liquid ends and O-rings in alternative materials, alternative voltages.

EMEC V SERIES METERING PUMPS

Page 15 - Section 1


Catalogue 2017




PUMP MODELS:

PUMP SIZES:

EMEC VA SELF VENTING SERIES METERING PUMPS

STANDARD FEATURES: WALL MOUNTING ANALOGUE CONTROLS STROKE RATE ADJUSTMENT 0-100% HOUSING IN POLYPROPYLENE LIQUID ENDS AND ACCESSORIES IN PVDF LEVEL OF PROTECTION IP65 2 YEAR WARRANTY*

The VA series metering pumps feature self venting heads, to ensure reliable dosing for medias that release gasses during pumping. All pumps are supplied with suction tubing, discharge tubing, foot-valve and injection valve. A low level float switch and pacing cables are also included where relevant.


1802 18 2 0.19 4x8

1503 15 3 0.28 4x6

1501 15 1 0.10 4x6

1003.4 10 3.4 0.32 4x6

1007 10 7 0.65 4x6

1002 10 2 0.19 4x6

1000.5 10 0.5 0.05 4x8

0704 7 4 0.37 4x6

0507.5 5 7.5 0.70 4x6

0509 5 9 0.84 4x6

0405.5 4 5.5 0.51 4x6

0307 3 7 0.65 4x6

0213 2 13 1.2 6x8

0113.5 1 13.5 1.25 6x8

VA CO Constant output pump with stroke speed adjustment.

VA CL Constant output pump with stroke speed adjustment, with level control.

VA PVM Pump with external pulse signal input and pulse multiplier/divider function.


PUMP OPTIONS: Liquid ends and O-rings in alternative materials, alternative voltages.

Section 1 - Page 16



Catalogue 2017




PUMP MODELS:

PUMP SIZES:

EMEC VMS DIGITAL SERIES METERING PUMPS

STANDARD FEATURES: WALL MOUNTING DIGITAL CONTROLS STROKE RATE ADJUSTMENT 0-100% HOUSING IN POLYPROPYLENE LIQUID ENDS AND ACCESSORIES IN PVDF LEVEL OF PROTECTION IP65 2 YEAR WARRANTY*

The VMS Digital series metering pumps feature microprocessor control, a digital display and digital controls, in a compact wall mounting format. All pumps are supplied with suction and discharge tubing, foot-valve and injection valve, and low level float switch in PVDF. Pacing cables are also included where relevant.


2001 20 1 0.1 4x8 1802 18 2 0.19 4x8 1804 18 4 0.37 4x8 1502 15 2 0.19 4x6 1504 15 4 0.37 4x6 1505 15 5 0.46 4x6 1004 10 4 0.37 4x6 1005 10 5 0.46 4x6 1010 10 10 0.93 4x6 0706 7 6 0.56 4x6 0510 5 10 0.93 4x6 0512 5 12 1.11 4x6 0501 5 1 0.1 4x6 0408 4 8 0.74 4x6 0310 3 10 0.93 4x6 0217 2 17 1.57 6x8 0116 1 16 1.48 6x8

VMS MF Multifunction pump. Modes: constant, pulse divide, multiply, PPM, batch, Volt, mA, %, ml/q, alarm output (option), level control.

VMS EN Digital pump with built in Timer, LCD display, level probe.

VMS PO Digital pump with built in pH/ORP controller, direct probe connection, proportional action.


Page 17 - Section 1


Catalogue 2017




PUMP MODELS:

PUMP SIZES:

EMEC VMSA DIGITAL SELF VENTING SERIES METERING PUMPS

STANDARD FEATURES: WALL MOUNTING DIGITAL CONTROLS STROKE RATE ADJUSTMENT 0-100% HOUSING IN POLYPROPYLENE LIQUID ENDS AND ACCESSORIES IN PVDF LEVEL OF PROTECTION IP65 2 YEAR WARRANTY*

The VMSA series metering pumps feature microprocessor controls and advanced functions as described below. All pumps are supplied with suction and discharge tubing, foot-valve, injection valve and low level float switch in PVDF. Pacing cables are also included where relevant.


1802 18 2 0.19 4x8

1503 15 3 0.28 4x6

1501 15 1 0.10 4x6

1003.4 10 3.4 0.32 4x6

1007 10 7 0.65 4x6

1002 10 2 0.19 4x6

1000.5 10 0.5 0.05 4x8

0704 7 4 0.37 4x6

0507.5 5 7.5 0.70 4x6

0509 5 9 0.84 4x6

0405.5 4 5.5 0.51 4x6

0307 3 7 0.65 4x6

0213 2 13 1.2 6x8

0113.5 1 13.5 01.25 6x8

VMSA MF Multifunction Pump. Modes: constant, pulse divide, multiply, PPM, batch, Volt, mA, %, ml/q, level control.

VMSA EN Digital pump with built in timer, LCD display, with level probe.

VMSA PO Digital pump with built in pH/ORP controller, direct probe connection, proportional action, with level probe.


Section 1 - Page 18



Catalogue 2017




OPTIONS:

PUMP MODELS:

EMEC WD SERIES DUAL PUMPS WITH BUILT IN CONTROLLERS FOR SWIMMING POOLS

STANDARD FEATURES: IP65 WALL MOUNTING MEASUREMENT AND CONTROL OF TWO

PARAMETERS SIMULTANEOUSLY WITH TWO INTEGRAL DOSING PUMPS 2 YEAR WARRANTY*

Self venting versions available on request.


Model Function

WDPHRH Swimming pool controller for pH(0-14) and redox (0-1000mV), with 2 x metering pumps for acid and disinfectant. LCD backlit display, alarm output, maximum dosing time alarm, probe check function, pH priority dosing, pump heads and accessories in PVDF, 7LPH or 10LPH at 3 Bar.

WDPHCL Swimming pool controller for pH(0-14) and Chlorine (or Bromine)(0-10PPM), with 2 x metering pumps for acid and disinfectant. LCD backlit display, alarm output, maximum dosing time alarm, probe check function, pH priority dosing, pump heads and accessories in PVDF, each pump 7LPH or 10LPH at 3 Bar.

WDPHCF Swimming pool controller for measuring pH(0-14) and Chlorine (0-10PPM), with 2 x metering pumps for acid and flocculant, plus electric valve output (e.g. - salt water chlorinator or chlorine gas), LCD backlit display, alarm output, maximum dosing time alarm, probe check function, pH priority dosing, pump heads and accessories in PVDF, each pump 7LPH or 10LPH at 3 Bar.

WDPHCA Swimming pool controller for measuring pH(0-14) and Chlorine (0-10PPM), with 2 x metering pumps for acid and algaecide, plus electric valve output (e.g.—for salt water chlorinator or chlorine gas control), weekly timer for algaecide dosing, LCD backlit display, alarm output, maximum dosing time alarm, probe check function, pH priority dosing, pump heads and accessories in PVDF, each pump 7LPH or 10LPH at 3 Bar.

WDPHOS Swimming pool controller for measuring pH(0-14) and Temperature (0-100 degrees C), with 2 x metering pumps for acid and Hydrogen Peroxide, LCD backlit display, alarm output, maximum dosing time alarm, probe check function, pump heads and accessories in PVDF, acid pump 10LPH max at 3 Bar, peroxide pump 4LPH, 3 Bar.

WDPHRHS Swimming pool controller for measuring pH(0-14) and ORP (0-1000mV), with 2x metering pump for acid and disinfectant (ORP), output relay for chlorine generator, LCD backlit display, alarm output, maximum dosing time alarm, probe check function, pH priority dosing, pump heads and accessories in PVDF, pump 10LPH max at 3 Bar.

WDPHCLS Swimming pool controller for measuring pH(0-14) and chlorine/bromine (0-10mg/l Cl2), with 2x metering pump for acid and chlorine/bromine, plus output for chlorine generator (hydrolysis), LCD backlit display, alarm output, maximum dosing time alarm, probe check function, pH priority dosing, pump heads and accessories in PVDF, pump 10LPH max at 3 Bar.

Page 19 - Section 1


Catalogue 2017




PUMP MODELS:

EMEC WTC SERIES DUAL PUMPS WITH BUILT IN CONTROLLERS FOR COOLING TOWERS STANDARD FEATURES: IP65 WALL MOUNTING CONDUCTIVITY MEASUREMENT AND

BLOWDOWN CONTROL BUILT IN BIOCIDE TIMERS WITH TWO INTEGRAL DOSING PUMPS 2 YEAR WARRANTY*

Model Function

WTC Cooling tower controller with conductivity input (probe included). Features blow down control and pre-bleed options. Two built in pumps can be configured to be driven by external flow meter (e.g. makeup), percentage mode, PPM mode, 1-4 week timer or feed and bleed. Additional output (timer controlled).

WTC IND Cooling tower controller with inductive conductivity probe. Features blow down control and pre-bleed options. All pumps can be configured to be driven by external flow meter (e.g. makeup), percentage mode, PPM mode, 1-4 week timer or feed and bleed.


Section 1 - Page 20



Catalogue 2017






Tube Size IDxOD

1201.5 12 1.5 0.17 3/8” 4x6

1002.2 10 2.2 .25 3/8” 4x6

0703 7 3 0.34 3/8” 4x6

0505 5 5 0.56 3/8” 4x6

0306.5 3 6.5 0.72 3/8” 4x6

0308.5 3 8.5 0.95 3/8” 4x6

PUMP MODELS: FCL Manual setup with low level float switch.

FIC F pump with external 4-20mA control signal input.

FPVM F pump with external pulse input signal, built in pulse multipliers/dividers.

FEN Digital version with built in time clock.

STANDARD FEATURES: STROKE RATE ADJUSTMENT 0-100% CHEMICAL LEVEL SWITCH INPUT HOUSING AND LIQUID ENDS IN

POLYPROPYLENE LEVEL OF PROTECTION IP65 PTFE DIAPHRAGM 2 YEAR WARRANTY*

The F series metering pumps provide effective metering in a low cost wall mounting configuration. These popular units are often applied in swimming pools, cooling and heating circuits, and in horticulture. A variety of input signals can be accepted depending on the model (see below). All pumps are supplied with suction and discharge tubing, foot-valve, injection valve and low level float switch. Pacing cables are also included where relevant. The F series pumps are in the process of being superseded by the V series (see pg 15-18). F series will remain available for the foreseeable future, but we will be reducing our stock in the near future. Please check our stock levels or discuss with us before quoting.

EMEC F SERIES METERING PUMPS


Page 21 - Section 1


Catalogue 2017

Section 2PeriStaltic Metering PuMPS

2

CATALOGUE—2017

2017


INDEX

V SERIES PERISTALTIC METERING PUMPS, MODEL 0 - 2 LPH PAGE 1

F SERIES PERISTALTIC METERING PUMPS, MODEL 0 - 2 LPH PAGE 2

SECTION 2—PERISTALTIC METERING PUMPS



Catalogue 2017


2

CATALOGUE SECTION 2 — PERISTALTIC METERING PUMPS



PUMP MODELS:

EMEC V SERIES PERISTALTIC METERING PUMPS

STANDARD FEATURES: LOW COST VALVE-LESS DOSING PUMPS

12 MONTH WARRANTY*

Each pump is supplied with a foot-valve, injection valve, and 4m of PVC suction or discharge tubing.

Model Tube Connections

Nominal Flow-Rate

L/hr

Maximum Back

Pressure

Maximum Operating

Time (minutes)

Maximum Duty Cycle

VPESR2 4x6 PVC 2 0.5 Bar 30 50%

VPESR00.8 4x6 PVC 0.8 0.5 Bar 30 50%

VPER002 4X6 PVC 0.154 - 2.0 0.5 Bar 30 50%

Peristaltic pumps use rotating rollers to compress a flexible tube, creating positive displacement. This produces an effective valve-less pump which is self priming. This pump is a low cost option, but it is limited to applications where operation is intermittent, and where there is minimal back pressure. Model VPESR features constant output with no control. Model VPER2 has a built in timer, on time and off time are independently adjustable from 5 to 60 seconds. Applications include cooling towers, rinse baths, fountains and swimming pools. Please call and discuss your application, so we can determine if a peristaltic pump is the right solution for you.


VPER002 VPESR

Page 1 - Section 2


Catalogue 2017


2

CATALOGUE SECTION 2 — PERISTALTIC METERING PUMPS



PUMP MODELS:

Peristaltic pumps use rotating rollers to compress a flexible tube, creating positive displacement. This produces an effective valve-less pump which is self priming. This pump is a low cost option, but it is limited to applications where operation is intermittent, and where there is minimal back pressure. Model VPESR features constant output with no control. Model FPER2 has a built in timer, on time and off time are independently adjustable from 5 to 60 seconds. Applications include cooling towers, rinse baths, fountains and swimming pools. Please call and discuss your application, so we can determine if a peristaltic pump is the right solution for you.

Model Tube Connections

Nominal Flow-Rate

L/hr

Maximum Back

Pressure

Maximum Operating

Time (minutes)

Maximum Duty Cycle

FPESR2 4x6 PVC 2 0.5 Bar 30 50%

FPESR00.8 4x6 PVC 0.8 0.5 Bar 30 50%

FPER002 4X6 PVC 0.154 - 2.0 0.5 Bar 30 50%

EMEC F SERIES PERISTALTIC METERING PUMPS

STANDARD FEATURES: LOW COST VALVE-LESS DOSING PUMPS 12 MONTH WARRANTY*

Each pump is supplied with a foot-valve, injection valve, and 4m of PVC suction or discharge tubing.


FPESR FPER002

Section 2 - Page 2

2


Catalogue 2017

Section 3PneuMatic Metering PuMPS

3

CATALOGUE—2017

2017


INDEX

RAC SERIES PNEUMATICALLY DRIVEN METERING PUMPS, 0-12LPH PAGE 1

KAC SERIES PNEUMATICALLY DRIVEN METERING PUMPS, 0-18LPH PAGE 2

AMS AC SERIES PNEUMATICALLY DRIVEN METERING PUMPS, 0-260LPH PAGE 3

TAC SERIES PNEUMATICALLY DRIVEN METERING PUMPS, 0-260LPH PAGE 4

SECTION 3—PNEUMATIC METERING PUMPS



Catalogue 2017


3

CATALOGUE SECTION 3 — PNEUMATIC METERING PUMPS

SECTION 3


PAGE 1 2017

STANDARD FEATURES: DRIVEN BY COMPRESSED AIR MANUAL STROKE LENGTH ADJUSTMENT

FROM 0-100% LIQUID END IN POLYPROPYLENE O-RING SEALS IN EPDM, VITON OR

NITRILE DIAPHRAGM IN PTFE WALL OR DIN RAIL MOUNTING 2 YEAR WARRANTY*

PUMP SIZES:

Model Pressure (max) Bar Flow l/h CC/Stroke Tube Size

IDxOD Valve Size

0601 6 1 0.14 4x6 1/2”

0603 6 3 0.42 4x6 1/2”

0606 6 6 0.83 4x6 1/2”

0612 6 12 1.66 4x6 1/2”

Max 120 strokes per minute. Air Requirements: 2.4 litres per minute at 6-8 Bar. Working Environment: –10 to +50 degrees C.

EMEC RAC SERIES PNEUMATICALLY DRIVEN METERING PUMPS

BRIEF SPECIFICATIONS:

MODELS: RAC Standard

RACV Integral Solenoid Valve

RACP Priming Button


Page 1 - Section 3


Catalogue 2017


3


SECTION 3


PAGE 2 2017

EMEC KAC SERIES PNEUMATICALLY DRIVEN METERING PUMP

STANDARD FEATURES: DRIVEN BY COMPRESSED AIR STROKE LENGTH ADJUSTMENT FROM

0-100% STROKE FREQUENCY ADJUSTMENT FROM 0-100% LIQUID END IN PVDF O-RING SEALS IN EPDM, VITON OR NITRILE DIAPHRAGM IN PTFE 2 YEAR WARRANTY*

PUMP SIZE:


IDxOD Valve Size

1018 10 18 2.1 6x8 1/2”

MODELS: KAC CO Manual setup (Constant output pump with stroke speed and stroke length

adjustment).

KAC CL Manual setup, with level probe input.

KMS AC MF Digital Multifunction pump, Constant, pulse, divide, multiply, PPM, Batch, Volt, mA, %, ml/q, standby, flow sensor input, alarm output, level control.

OPTIONS: Liquid Ends and Accessories in Alternative Materials. NOTE: Use compressed air from 6-10 bar without lubricant or water.


Section 3 - Page 2


Catalogue 2017


3


SECTION 3


PAGE 3 2017

EMEC AMS AC SERIES PNEUMATICALLY DRIVEN METERING PUMP

STANDARD FEATURES: DRIVEN BY COMPRESSED AIR STROKE LENGTH ADJUSTMENT FROM

0-100% STROKE FREQUENCY ADJUSTMENT FROM 0-100% LIQUID END IN PVDF O-RING SEALS IN EPDM, VITON OR

NITRILE DIAPHRAGM IN PTFE 2 YEAR WARRANTY*

PUMP SIZE:

Model Pressure (max) Bar Flow l/h CC/ Stroke Tube Size

IDxOD Valve Size

1050 10 50 7 8x10/8x12 1/2”

05140 5 140 19 13x16/12x18 3/4”

00220 0 220 30 13x16/12x18 3/4”

MODELS: A AC CO Manual setup (Constant output pump with stroke speed and stroke length

adjustment).

A AC CL Manual setup, with level probe input.

AMS AC MF Digital Multifunction pump, Constant, pulse, divide, multiply, PPM, Batch, Volt, mA, %, ml/q, standby, flow sensor input, alarm output, level control.

OPTIONS:

Liquid Ends and Accessories in Alternative Materials. NOTE: Use compressed air from 6-10 bar without lubricant or water.


Page 3 - Section 3


Catalogue 2017


3


SECTION 3


PAGE 4 2017

EMEC TAC SERIES PNEUMATICALLY DRIVEN METERING PUMP

STANDARD FEATURES: DRIVEN BY COMPRESSED AIR STROKE FREQUENCY ADJUSTMENT FROM

0-100% LIQUID END IN PVDF O-RING SEALS IN EPDM, VITON OR

NITRILE DIAPHRAGM IN PTFE 2 YEAR WARRANTY*

PUMP SIZE:


IDxOD Valve Size

1050 10 50 7 8x10/8x12 1/2”

05150 5 150 20 13x16/12x18 3/4”

00230 0 230 32 13x16/12x18 3/4”

MODELS: T AC CO Manual setup (Constant output pump with stroke speed and stroke length

adjustment).

T AC CL Manual setup, with level probe input.

TMS AC MF Digital Multifunction pump, Constant, pulse, divide, multiply, PPM, Batch, Volt, mA, %, ml/q, standby, flow sensor input, alarm output, level control.

OPTIONS:

Liquid Ends and Accessories in Alternative Materials. NOTE: Use compressed air from 6-10 bar without lubricant or water.


Section 3 - Page 4


Catalogue 2017

Section 4Motor driven Metering PuMPS

4

CATALOGUE—2017

2017


INDEX

SECTION 4—MOTOR DRIVEN METERING PUMPS

PRIUS D SERIES METERING PUMPS, 0-1000LPH PAGE 1 & 2

PRIUS D HIGH PRESSURE METERING PUMPS, UP TO 100 BAR PAGE 3

PRIUS D MF SERIES METERING PUMPS WITH BUILT-IN CONTROLS, 0-1000LPH PAGE 4 & 5

PRIUS D MF HIGH PRESSURE METERING PUMPS, UP TO 100 BAR PAGE 6

PRIUS P SERIES PLUNGER METERING PUMP, UP TO 320LPH AT 10 BAR PAGE 7

PRIUS P MF SERIES PLUNGER PUMP WITH BUILT-IN CONTROLS, UP TO 320LPH AT 10BAR PAGE 8


Sect

ion

4


Catalogue 2017


4

CATALOGUE SECTION 4 — MOTOR DRIVEN METERING PUMPS

SECTION 4


PAGE 1 2017


EMEC PRIUS D DIAPHRAGM METERING PUMPS

STANDARD FEATURES: POSITIVE DISPLACEMENT PUMP

WITH SPRING RETURN MECHANISM STROKE LENGTH ADJUSTABLE FROM

0-100% DOSING HEADS IN PVDF, PP AND SS ALUMINIUM ENCLOSURE WITH CHEMICAL

RESISTANT EPOXY COATING MANUAL DEGASSING VALVE (PVDF & PP) SINGLE PHASE OR THREE PHASE DOUBLE BALL CHECK VALVES 2 YEAR WARRANTY*

** Maximum Temperature can be exceeded for a short time during CIP.

NOTE: Protection against blocked discharge is recommended for motor pumps.

Robust and accurate, these industrial quality pumps have been developed for reliable metering in larger commercial and industrial applications. With pressure capabilities up to 100 BAR, and flow rates up to 1000LPH, there is a PRIUS model suitable for most applications.

PUMP OPTIONS: Power Supply 220 - 240VAC 1PH, 240/400VAC 3PH

Chemical Temperature for PVDF** -10 to 65°C

Chemical Temperature for SS** -10 to 90°C

Chemical Temperature for PP -10 to 40°C

Insulation Class 2

Protection IP55

Audible Level 78 dba (±5)

Max Suction Height 3M

Oil Capacity 0.3L

Page 1 - Section 4


Catalogue 2017


4


SECTION 4


PAGE 2 2017

PUMP MODELS:

EMEC PRIUS D METERING PUMPS

Model Capacity L/hr

Pressure (Bar)

Speed (SPM)

Pump Heads Available

Installation Kit

010024 24 10 70 PVDF, SS, PP A (Included)







005096 96 5 70 PVDF, SS, PP B


005128 128 5 94 PVDF, SS, PP B

005140 140 5 70 PVDF, SS, PP C


005176 176 5 70 PVDF, SS, PP C

005188 188 5 94 PVDF, SS, PP C

005212 212 5 70 PVDF, SS, PP C

005236 236 5 94 PVDF, SS, PP C

005240 240 5 175 PVDF, SS, PP B

005284 284 5 94 PVDF, SS, PP C

005350 350 5 175 PVDF, SS, PP C

005440 440 5 175 PVDF, SS, PP C

005530 530 5 175 PVDF, SS, PP C

003750 750 3 175 PP, PVC N/A

003M00 1000 3 175 PP, PVC N/A

NOTE: Installation Kits do not fit Pumps with Stainless Steel Heads.

Section 4 - Page 2

Sect

ion

4


Catalogue 2017


4


SECTION 4


PAGE 3 2017

PUMP MODELS:

Model Capacity L/hr

Pressure (Bar)

Speed (SPM)

Pump Head

Motor Size

1001.5 1.5 100 70 SS 0.37kW

100002 2 100 94 SS 0.37kW

100004 4 100 175 SS 0.37kW

060005 5 60 70 SS 0.37kW

060009 9 60 94 SS 0.37kW

040010 10 40 70 SS 0.37kW

040015 15 40 94 SS 0.37kW

060017 17 40 175 SS 0.37kW

040028 28 40 175 SS 0.37kW

030030 30 30 70 SS 0.37kW

030041 41 30 94 SS 0.37kW

020057 57 20 70 SS 0.37kW

030076 76 30 175 SS 0.37kW

020078 78 20 94 SS 0.37kW

020146 146 20 175 SS 0.37kW

EMEC PRIUS D HIGH PRESSURE METERING PUMPS

Page 3 - Section 4


Catalogue 2017


4


SECTION 4


PAGE 4 2017

PUMP OPTIONS:


EMEC PRIUS D MF DIAPHRAGM METERING PUMPS

NOTE: Protection against blocked discharge is recommended for motor pumps.

STANDARD FEATURES: MOTOR DRIVEN DIAPHRAGM PUMP WITH

BUILT IN SPEED CONTROL STROKE LENGTH ADJUSTABLE FROM

0-100% LEVEL CONTROL ALARMS ALUMINIUM ENCLOSURE WITH CHEMICAL

RESISTANT EPOXY COATING MANUAL DEGASSING VALVE SINGLE PHASE SUPPLY 2 YEAR WARRANTY*

The PRIUS D is now available in a MF version. With sophisticated electronics built in, these versatile pumps can accept a range of standard process signals for automatic speed control. With pressure capabilities up to 100 BAR and flow rates up to 1000LPH, there is a PRIUS model suitable for most applications.

Power Supply 220 - 240VAC 1PH

Pump Heads Available in PVDF, SS or PP

Chemical temperature for PVDF -10 to 65°C

Chemical temperature for SS -10 to 90°C

Chemical temperature for PP -10 to 40°C

Insulation Class 2

Protection IP55

Audible Level 78 dba (±5)

Max Suction Height 3M

Oil Capacity 0.3L

Operating Modes Constant, PPM, %, mlq, mA, Volt, Batch, Pause/Work, Low Chemical Level Input, Alarm Output, Standby Input

OR

Section 4 - Page 4

Sect

ion

4


Catalogue 2017


4


SECTION 4


PAGE 5 2017

EMEC PRIUS D MF METERING PUMPS

PUMP MODELS:

Model Capacity L/hr

Pressure (Bar)

Speed (SPM)

Pump Heads Available

Motor Size

Installation Kit

010012 12 10 35 PVDF, SS, PP 0.18kW A (Included)







005048 48 5 35 PVDF, SS, PP 0.37kW B




005070 70 5 35 PVDF, SS, PP 0.37kW C


005088 88 5 35 PVDF, SS, PP 0.37kW C

005096 96 5 70 PVDF, SS, PP 0.37kW B


005106 106 5 35 PVDF, SS, PP 0.37kW C

005128 128 5 94 PVDF, SS, PP 0.37kW B

005140 140 5 70 PVDF, SS, PP 0.37kW C


005176 176 5 70 PVDF, SS, PP 0.37kW C

005188(1) 188 5 94 PVDF, SS, PP 0.37kW C

005212 212 5 70 PVDF, SS, PP 0.37kW C

005236 236 5 94 PVDF, SS, PP 0.37kW C

005240 240 5 175 PVDF, SS, PP 0.37kW B

005284 284 5 94 PVDF, SS, PP 0.37kW C

005350 350 5 175 PVDF, SS, PP 0.37kW C

005440 440 5 175 PVDF, SS, PP 0.37kW C

005530 530 5 175 PVDF, SS, PP 0.37kW C

003750 750 3 175 PP, PVC 0.37kW N/A

003M00 1000 3 175 PP, PVC 0.37kW N/A

Page 5 - Section 4


Catalogue 2017


4


SECTION 4


PAGE 6 2017

EMEC PRIUS D MF HIGH PRESSURE METERING PUMPS

Model Capacity L/hr

Pressure (Bar)

Speed (SPM)

Pump Head

Motor Size

1001.5 1.5 100 70 SS 0.37kW

100002 2 100 94 SS 0.37kW

100004 4 100 175 SS 0.37kW

060005 5 60 70 SS 0.37kW

060009 9 60 94 SS 0.37kW

040010 10 40 70 SS 0.37kW

040015 15 40 94 SS 0.37kW

060017 17 40 175 SS 0.37kW

040028 28 40 175 SS 0.37kW

030030 30 30 70 SS 0.37kW

030041 41 30 94 SS 0.37kW

020057 57 20 70 SS 0.37kW

030076 76 30 175 SS 0.37kW

020078 78 20 94 SS 0.37kW

020146 146 20 175 SS 0.37kW

PUMP MODELS:

Section 4 - Page 6

Sect

ion

4


Catalogue 2017


4


SECTION 4


PAGE 7 2017

EMEC PRIUS P PLUNGER PUMPS

STANDARD FEATURES: PP OR SS PUMP HEAD STAINLESS OR CERAMIC PLUNGER ALUMINIUM ENCLOSURE WITH CHEMICAL RESISTANT EPOXY COATING STROKE LENGTH ADJUSTABLE FROM

0-100% 220-240VAC SINGLE PHASE OR 230/400V THREE PHASE 2 YEAR WARRANTY*

PUMP MODELS:

Model Pressure (Bar)

Speed (SPM)

Installation Kit

Capacity (L/hr)

010010 10 70 A (Included) 10

010013 10 94 A (Included) 13

010024 10 175 A (Included) 24

010032 10 70 A (Included) 32

010043 10 94 A (Included) 43

010052 10 70 A (Included) 52

010070 10 94 A (Included) 70

010080 10 175 A (Included) 80

010084 10 70 B 84

010113 10 94 B 113

010128 10 70 B 128

010130 10 175 A (Included) 130

010172 10 94 B 172

010210 10 175 B 210

010320 10 175 B 320

NOTE: Protection against blocked discharge is recommended for motor pumps. Installation Kits do not fit Pumps with Stainless Steel Heads.


Page 7 - Section 4


Catalogue 2017


4


SECTION 4


PAGE 8 2017

EMEC PRIUS P MF PLUNGER PUMPS

STANDARD FEATURES: MOTOR DRIVEN PLUNGER PUMP WITH BUILT

IN SPEED CONTROL STROKE LENGTH ADJUSTABLE FROM 0-100% PP HEAD WITH CERAMIC PLUNGER OR

STAINLESS HEAD AND PLUNGER OPTIONS WORKING MODES: CONSTANT,PPM,%, MA

VOLT, BATCH LEVEL CONTROL ALARMS ALUMINIUM ENCLOSURE WITH CHEMICAL

RESISTANT EPOXY COATING SINGLE PHASE SUPPLY 2 YEAR WARRANTY*

PUMP MODELS:

NOTE: Protection against blocked discharge is recommended for motor pumps. Installation Kits do not fit Pumps with Stainless Steel Heads.

Model Capacity L/hr

Pressure (Bar)

Speed (SPM)

Installation Kit

010010 10 10 70 A (Included)

010013 13 10 94 A (Included)

010024 24 10 175 A (Included)

010032 32 10 70 A (Included)

010043 43 10 94 A (Included)

010052 52 10 70 A (Included)

010070 70 10 94 A (Included)

010080 80 10 175 A (Included)

010084 84 10 70 B

010113 113 10 94 B

010128 128 10 70 B

010130 130 10 175 A (Included)

010172 172 10 94 B

010210 210 10 175 B

010320 320 10 175 B


Section 4 - Page 8


Catalogue 2017

Section 5Metering PuMP acceSSorieS

5


CATALOGUE—2017

2017


INDEX

1/2” INJECTION VALVES PAGE 1

3/4” INJECTION VALVES PAGE 2

FOOT VALVES PAGE 3

FOOT VALVES WITH LEVEL PROBE PAGE 4

INJECTION LANCES PAGE 5

SUCTION LANCES PAGE 5

MULTIFUNCTION VALVE PAGE 6

FLOW SENSOR PAGE 6

CALIBRATION CYLINDERS PAGE 6

PUMP MOUNTING BRACKETS PAGE 7

PULSATION DAMPENERS PAGE 7

CONNECTION SETS & VALVE BODIES PAGE 8

TUBING FOR METERING PUMPS PAGE 9

PRIUS ACCESSORY KITS PAGE 10

CHEMICAL TANKS PAGE 11

SECTION 5—METERING PUMP ACCESSORIES


Catalogue 2017


5

CATALOGUE SECTION 5 — METERING PUMP ACCESSORIES

SECTION 5


PAGE 1 2017

EMEC 1/2” INJECTION VALVES

TUBE CONNECTION

VALVE BODY

VALVE SEALS

PART CODE

4x6 PVDF VITON 073.1062.1

4x6 PVDF EPDM 073.1065.1

4x6 PVDF WAX 073.1111.1

4x6 PP EPDM 073.1390.1

4x6 PP WAX 073.1538.1

4x6 316SS VITON 073.0888.1


4x8 PVDF EPDM 073.1137.1

4x8 PVDF WAX 073.1167.1

4x8 PP EPDM 073.1541.1


6x8 PVDF EPDM 073.1112.1

6x8 PVDF WAX 073.1189.1

6x8 PP EPDM 073.1495.1

6x8 316SS VITON 073.0889.1

8x10 PVDF VITON 073.1080.1

8x10 PVDF EPDM 073.1135.1

8x10 PVDF WAX 073.1337.1

8x12 PVDF VITON 073.1081.1

8x12 PVDF EPDM 073.1136.1

8x12 PVDF WAX 073.1606.1

8x12 PP EPDM 073.1405.1

12x18 PVDF VITON 073.1132.1

12x18 PVDF EPDM 073.1133.1

12x18 PVDF WAX 073.1607.1

12x18 PP EPDM 073.1542.1

1/2” Valves feature 1/2” BSP taper thread and 1/4” BSP parallel thread. All springs Hastelloy C - 0.3 Bar. Other spring settings on request. PVDF up to 135°C. PP up to 40°C.


Page 1 - Section 5


Catalogue 2017


5


SECTION 5


PAGE 2 2017

EMEC 3/4” INJECTION VALVES

TUBE CONNECTION

VALVE BODY

VALVE SEALS

PART CODE

8x10 PVDF VITON 073.1212.1

8x10 PVDF EPDM 073.1213.1

8x10 PVDF WAX 073.1608.1

8x12 PP EPDM 073.1543.1

12x18 PVDF VITON 073.0008.1

12x18 PVDF EPDM 073.0009.1

12x18 PVDF WAX 073.1609.1

12x18 PP EPDM 073.1394.1

13X16 PVDF VITON 073.1214.1

13x16 PVDF EPDM 073.1215.1

13x16 PVDF WAX 073.1610.1

3/4” Valves feature 3/4” BSP taper thread and 3/8” BSP parallel thread. All springs Hastelloy C - 0.3 Bar. Other spring settings on request. PVDF up to 135°C, PP up to 40°C.


Section 5 - Page 2


Catalogue 2017


5


SECTION 5


PAGE 3 2017

EMEC 1/2” FOOT VALVES EMEC AXIAL FOOT VALVE (WITHOUT FLOAT SWITCH)

TUBE CONNECTION

VALVE BODY

VALVE SEALS

PART CODE


4x6 PVDF EPDM 074.0571.1

4x6 PVDF WAX 074.0572.1

4x6 PP EPDM 074.0666.1

4x6 PP WAX 074.0686.1


4x8 PVDF EPDM 074.0596.1

4x8 PVDF WAX 074.0643.1

4x8 PP EPDM 074.0704.1


6x8 PVDF EPDM 074.0597.1

6x8 PVDF WAX 074.0640.1

6x8 PP EPDM 074.0687.1

8x10 PVDF VITON 074.0578.1

8X10 PVDF EPDM 074.0598.1

8X10 PVDF WAX 074.0739.1

8x10 PP EPDM 074.0689.1

8X12 PVDF VITON 074.0579.1

8X12 PVDF EPDM 074.0599.1

8X12 PVDF WAX 074.0740.1

8X12 PP EPDM 074.0696.1

12X18 PVDF VITON 074.0600.1

12X18 PVDF EPDM 074.0601.1

12X18 PVDF WAX 074.0741.1

12X18 PP EPDM 074.0705.1

1/2” Valves feature 1/2” BSP thread. Filter removable for cleaning. Ball valve serviceable.


For Larger foot Valves see section 16

Page 3 - Section 5


Catalogue 2017


5


SECTION 5


PAGE 4 2017

Cable length 2m. Longer cables available on request.

EMEC FOOT VALVE WITH LEVEL SWITCH

TUBE CONNECTION

VALVE BODY

VALVE SEALS

PART CODE


4x6 PVDF EPDM 076.0148.1

4x6 PP EPDM 076.0339.1

4x6 PP WAX 076.0507.1


4x8 PVDF EPDM 076.0199.1

4x8 PP EPDM 076.0367.1


6x8 PVDF EPDM 076.0201.1

6x8 PVDF WAX 076.0166.1

6x8 PP EPDM 076.0344.1

8x10 PVDF VITON 076.0202.1

8X10 PVDF EPDM 076.0203.1

8X10 PVDF WAX 076.0496.1

8X12 PVDF VITON 076.0204.1

8X12 PVDF EPDM 076.0205.1

8X12 PVDF WAX 076.0497.1

8X12 PP EPDM 076.0158.1

12X18 PVDF VITON 076.0206.1

12X18 PVDF EPDM 076.0207.1

12X18 PVDF WAX 076.0498.1

12X18 PP EPDM 076.0331.1

Replacement float switch only—PVDF FP 076.0149.1

Replacement float switch only—PVDF EP 076.0150.1


Section 5 - Page 4


Catalogue 2017


5


SECTION 5


PAGE 5 2017

PART CODE DESCRIPTION PART CODE DESCRIPTION

LINI-V 1/2” Injection Lance PVDF / Viton LINIR-V LINI-V with PVC ball valve

LINIR-K LINI-V with PVDF ball valve

LINI-D 1/2” Injection Lance PP / EPDM LINIR-D LINI-D with PVC ball valve

The injection lance allows the injection fitting to be withdrawn, serviced and refitted without depressurising the process line.

OPTIONS: Available with double suction connections for two pumps, LASP4 available with double float switches. Specify distance when ordering.

PVDF rated for 100°C at 8 Bar. PP rated at 40°C at 8 Bar. Extensions available 5,10 and 15cm long Available in a range of pipe connections, see page 8. Specify when ordering.

EMEC INJECTION LANCES

EMEC SUCTION LANCES EMEC RIGID SUCTION LANCE, WITH ADJUSTABLE HEIGHT,

FOOT VALVE AND FLOAT SWITCH BUILT IN

DESCRIPTION PART CODE

EMEC rigid suction lance, 4 x 6, 1/2”, PVC, Viton seals, available in 40, 63, 75, 108 and 122cm lengths LASP4/V

EMEC rigid suction lance, 4 x 6, 1/2”, PVC, EPDM seals, available in 40, 63, 75, 108 and 122cm lengths LASP4/D

EMEC rigid suction lance, 6 x 8 (or 8 x 12), 1/2”, PVC, Viton seals, available in 40, 63, 75, 108 and 122cm lengths

LASP5/V

EMEC rigid suction lance, 6 x 8 (or 8 x 12), 1/2”, PVC, EPDM seals, available in 40, 63, 75, 108, & 122cm lengths

LASP5/D


Page 5 - Section 5


Catalogue 2017


5


SECTION 5


PAGE 6 2017

EMEC MULTIFUNCTION VALVE COMBINED BACK PRESSURE, SAFETY, ANTI-SIPHON AND BLEED VALVE


3/8” valve, 4 x 6, PVDF with Viton seals (pump mount) MFKT/V

MFKT/V with wall bracket and hose fitting kit MFKTS/V

3/8” valve, 4 x 6, PP with EPDM seals (pump mount) MFKT/D

MFKT/D with wall bracket and hose fitting kit MFKTS/D

EMEC FLOW SENSOR FLOW SENSOR FOR CONFIRMATION OF PUMP OPERATION


Flow sensor PP, N/C contact, adjustable, EPDM seals SEFL/D

SEFL/D bracket version for wall mounting SEFLS/D

Flow sensor PVDF, N/C contact, adjustable, Viton seals SEFL/V

SEFL/V bracket version for wall mounting SEFLS/V

Add LPV to the part number for viscous liquids up to 8,000cPs.

PUMP ACCESSORIES


EMEC CALIBRATION CYLINDER 100ML CALIBRATION CYLINDER


Polypropylene, 4x6 connections CIL6

Polypropylene, 6x8 connections CIL8

Section 5 - Page 6


Catalogue 2017


5


SECTION 5


PAGE 7 2017

EMEC MOUNTING BRACKETS DESCRIPTION PART CODE

Wall mounting bracket for AMS/CMS series pump (side mount) STAMS

Wall mounting bracket for AMS/CMS series pump (front mount) STAMS2

Wall mounting bracket for K & H series pump STKN

Tank mounting bracket for K & H series pump STK1

Foot mounting bracket for T and G series pump STT

Foot mounting bracket for F series pump STF

Foot mounting bracket for V series pump STVN

Foot mounting bracket for W series dual pump STW

Tank Mounting bracket for PRIUS motor pump STPRIUS

EMEC PULSATION DAMPENERS

PUMP ACCESSORIES



0.09 Litre PVC pulsation dampener, Viton seals, 3/8” connection SOIM3/V

0.09 Litre PVC pulsation dampener, EPDM seals, 3/8” connection SOIM3/D

0.09 Litre PVDF pulsation dampener, Viton seals, 3/8” connection SOIM3K/V

0.5 Litre PVC pulsation dampener, Viton seals, 1/2” connection SOIM1/V

0.5 Litre PVC pulsation dampener, EPDM seals, 1/2” connection SOIM1/D

0.25 Litre PVC pulsation dampener, Viton seals SOIM2.5

0.5 Litre PVC pulsation dampener, Viton seals SOIM5

Page 7 - Section 5


Catalogue 2017


5


SECTION 5


PAGE 8 2017

EMEC CONNECTION SETS 3 PIECE CONNECTION SET, FOR CONNECTING TUBING

(ONE CONNECTION PER SET)

CONNECTIONS PART CODE

3/8” to 4 x 6 (ID x OD) tubing PP (BLACK) 025.0038.1

3/8” to 4 x 6 (ID x OD) tubing PVDF 025.0039.1

3/8” to 4 x 8 (ID x OD) tubing PVDF 025.0232.1


1/2” to 4 x 6 (ID x OD) tubing PVDF (BLACK) 025.0032.1





1/2” to 9 x 12 (ID x OD) tubing* PP BLACK 025.0967.1

1/2” to 5 x 8 (ID x OD) tubing * PVDF (BLACK) 025.0503.1

1/2” to 1/4” (0.25” OD) tubing ** PVDF (BLACK) 025.0954.1

1/2” to 3/8” (0.375”OD) tubing ** PVDF (BLACK) 025.0864.1

1/2” to 1/2” tubing ** PVDF (BLACK) 025.0570.1

EMEC EMPTY VALVE BODIES EMEC VALVE BODY (WITHOUT INTERNAL BALLS)


3/8” Valve body in Polypropylene, with Viton seals 025.0443.1

3/8” Valve body in PVDF, with Viton seals 025.0540.1

1/2” Valve body in Polypropylene, with Viton seals 025.0320.1

1/2” Valve body in PVDF, with Viton seals 025.0484.1

Add one connection set to make an adaptor to rigid pipe work.

Add two connections to join two tubes together, or adapt from one tube size to another.

Alternative O-ring materials on request. More sizes available on request.

Alternative colours and materials on request * Common size used with competing pump brands. ** For converting accessories for use with American pumps.

PUMP ACCESSORIES


Section 5 - Page 8


Catalogue 2017


5


SECTION 5


PAGE 9 2017

EMEC TUBING FOR METERING PUMPS — PER METER

All tubing above sold per metre and is cut to order.

PUMP ACCESSORIES


Suction tube 4 x 6, PVC 059.0003.0



Suction / Discharge tube, reinforced, 12 x 18, PVC 059.0005.0



Discharge tube 4 x 6, PE, Natural 059.0001.0

Discharge tube 4 x 6, PE, Black 059.0155.0


Suction / Discharge tube 6 x 8, PE, Natural 059.0010.0


Discharge tube 12x15, PE, Natural 059.0200.0

Discharge tube 18 x 25 PE, Natural 059.0944.0

Suction / Discharge tube 4 x 6, PVDF 059.0057.0





NOTE: To prevent compatibility issues and tube attachment failures, we recommend using genuine EMEC suction and discharge tubing. EMEC recommends using PVDF hoses when dosing sodium hypochlorite or concentrated sulphuric acid.


Suction tube 4 x 6, PVC, 50M roll 049.0363.0

Discharge tube 4 x 6, PE, Natural, 50M roll 049.0332.0

Discharge tube 4 x 6, PE, Black, 50M roll 049.0589.0

Suction / Discharge tube 4 x 6, PVDF, 50M roll 049.0483.0


EMEC TUBING — BULK ROLLS

Page 9 - Section 5


Catalogue 2017


5


SECTION 5


PAGE 10 2017

PRIUS INSTALLATION KITS


KIT A - 13mm ID tube

KIT B - 18mm ID tube

KIT C—30mm ID tube

Section 5 - Page10


Catalogue 2017


5


SECTION 5


PAGE 11 2017

OTHER PE TANKS


115 litre tank with place on lid D115


200 litre tank with two bungs D200B

200 litre tank with screw on lid D200C



EMEC PE DOSING TANK


EMEC DOSING TANK MODEL CNT PD 50 ONE PIECE MOULDED TANK 50L CAPACITY SCREW ON LID MOUNTING THREADS FOR METERING PUMPS MOUNTING THREADS FOR MIXER 7 ASSORTED DRILL OUT PORTS WITH BSP

THREADS CHEMICAL LEVEL SCALE

Page 11 - Section 5


Catalogue 2017

Section 6centrifugal cheMical PuMPS

6

CATALOGUE—2017

2017


INDEX

SECTION 6—CENTRIFUGAL CHEMICAL PUMPS

TMB SERIES PUMPS, 0-60L/MIN PAGE 1

TMP SERIES PUMPS, 0-200L/MIN PAGE 2

TMR SERIES PUMPS, 0-850L/MIN PAGE 3

TMA SERIES PUMPS, SELF PRIMING PAGE 4



Catalogue 2017


6

CATALOGUE SECTION 6 — CENTRIFUGAL CHEMICAL PUMPS

SECTION 6


PAGE 1 2017


ARGAL TMB CHEMICAL TRANSFER PUMPS

FEATURES: SINGLE PHASE IP54 230VAC

MOTOR MAGNETICALLY COUPLED NO METAL SHAFT OR

MECHANICAL SEAL LOW NOISE MAXIMUM VISCOSITY 20CPS ADMISSABLE LIQUID

TEMPERATURE 0-60°C GFR POLYPROPYLENE BODY & IMPELLOR

FOR SUPERIOR CHEMICAL RESISTANCE 12 MONTH WARRANTY*

NOTE: TMB Pumps cannot run dry. Flooded suction is recommended. Abrasive chemicals will reduce the life of the pump.

Model Max Head (m)

Max Capacity L/min Connections Power

Watts

TMB10 WR N 2 10 14mm hose tail 25

TMB20 WR N 3 20 3/4 BSP 29

TMB30 WR N 3 40 3/4 BSP 57

TMB35 WR N 8 15 3/4 / 3/8 BSP 57

TMB65 WR N 6 60 1” BSP 97

TYPICAL APPLICATIONS: Water treatment, ice making machines, beverage vending machines, corrosive chemical solutions, sea water, pure water (demineralised water), preservatives, horticultural applications, dyeing & etching, electroplating, de-scaling and toxic liquids.

PUMP MODELS:

PRINCIPAL OF OPERATION: The drive magnet is located outside of the sealed pump casing, and is driven by the motor. This drives the magnetic impellor inside the casing. In this way, the traditional shaft seal, and consequent leaking problems are eliminated.

Page 1 - Section 6


Catalogue 2017


6


SECTION 6


PAGE 2 2017

ARGAL TMP CHEMICAL PUMPS

FEATURES: IEC STANDARD MOTORS MAGNETICALLY COUPLED

CENTRIFUGAL PUMPS NO METAL SHAFT OR

MECHANICAL SEAL ALL THERMOPLASTIC (GFR/PP OR CFF/E-CTFE)

BODY & IMPELLOR FOR SUPERIOR CHEMICAL RESISTANCE

12 MONTH WARRANTY*

Model Max Head (m)

Max Capacity L/min Connections

TMP 0404 9 60 3/4” BSP

TMP 0408 9.5 120 1” BSP

TMP 0608 11 160 11/4” BSP

TMP 0610 12 200 11/4” BSP

NOTES: Order special version for run dry capability. Abrasive chemicals will reduce the life of the pump.

PUMP MODELS:

OPTIONS: Motor Single Phase, Three Phase, Assorted IP Ratings

Pump Head Available In GFR/PP or CFF/E-CTFE

3 Versions N, P or S for High SG Liquids (1.05, 1,35 and 1.8 respectively)

Impellor Shaft CER or SiC

Bushes CARB/HD, SiC or GFR/PTFE

O-Ring Gasket EPDM or Viton


Section 6 - Page 2


Catalogue 2017


6


SECTION 6


PAGE 3 2017

PUMP MODELS:

ARGAL TMR CHEMICAL PUMPS

FEATURES: IEC STANDARD MOTORS MAGNETICALLY COUPLED CENTRIFUGAL

PUMPS NO METAL SHAFT OR MECHANICAL SEAL ALL THERMOPLASTIC (GFR/PP OR CFF/E-CTFE) BODY & IMPELLOR FOR SUPERIOR CHEMICAL RESISTANCE 12 MONTH WARRANTY*

Model Max Head (m)

Max Capacity L/min

Connections Inlet - Outlet

TMR 06.10 22 40 1 1/2” - 1 1/4” BSP

TMR 10.10 20 266 1 1/2” - 1 1/4” BSP

TMR 10.15 18 400 1 1/2” - 1 1/4” BSP

TMR 16.15 23 430 2” - 1 1/2” BSP

TMR 16.20 26 500 2” - 1 1/2” BSP

TMR 02.30 32 100 2” - 1 1/2” BSP

TMR 20.15 20 600 2” - 1 1/2” BSP

TMR 20.20 24 660 2” - 1 1/2” BSP

TMR 20.27 30 600 2” - 1 1/2” BSP

TMR20.36 40 650 2” - 1 1/2” BSP

TMR 30.15 22 730 2” - 1 1/2” BSP

TMR 30.25 30 800 2” - 1 1/2” BSP

TMR36.30 35 850 2” - 1 1/2” BSP






Exclusive Patented Run Dry Option Available. Explosion Proof Version Available. Flanged Connections on Request.


Page 3 - Section 6


Catalogue 2017


6


SECTION 6


PAGE 4 2017

ARGAL TMA SELF PRIMING CHEMICAL PUMPS

FEATURES: SELF PRIMING PUMP—UPTO –5M SUCTION LIFT IEC STANDARD MOTORS MAGNETICALLY COUPLED CENTRIFUGAL PUMPS NO METAL SHAFT OR MECHANICAL SEAL ALL THERMOPLASTIC (GFR/PP OR CFF/E-CTFE) BODY & IMPELLOR FOR SUPERIOR CHEMICAL RESISTANCE 12 MONTH WARRANTY*

Model Max Head (m)

Max Capacity L/min Connections

TMA 0116 22 40 3/4” BSP

TMA 1014 20 266 11/2” BSP

NOTE: Abrasive chemicals will reduce the life of the pump.



3 Versions N, P or S for High SG Liquids (1.05, 1,35 and 1.8 respectively)




PUMP MODELS:


Explosion Proof Version Available.

Section 6 - Page 4


Catalogue 2017


6


SECTION 6


PAGE 5 2017

ARGAL CHEMICAL PUMPS LARGER CHEMICAL PUMPS ON REQUEST

Page 5 - Section 6


Catalogue 2017


6


SECTION 6


PAGE 6 2017

ARGAL CHEMICAL PUMP CURVES

TMB Series TMP Series

TMR Series

Section 6 - Page 6


Catalogue 2017

Section 7air oPerated double diaPhragM PuMPS

7

CATALOGUE—2017

2017


INDEX

ASTRA COMPACT SERIES PUMPS, 0—30 L/MIN PAGE 1

ASTRA SERIES PUMPS, 0—650 L/MIN PAGE 2

ASTRAFOOD SERIES FOOD GRADE PUMPS, 0—650 L/MIN PAGE 3

MISTRAL SERIES PUMPS 680—1280 L/MIN PAGE 4

AIRSATURN SERIES PUMPS 680—1280 L/MIN PAGE 5

ACTIVE PULSATION DAMPENERS PAGE 6

FLOW CURVES PAGE 7

FLOW CURVES PAGE 8

SECTION 7—AIR OPERATED DOUBLE DIAPHRAGM PUMPS



Catalogue 2017

7

Section 7air oPerated double diaPhragM PuMPSCATALOGUE SECTION 7 — AIR OPERATED DOUBLE DIAPHRAGM PUMPS

SECTION 7


PAGE 1 2017

OPTIONS:

PUMP MODELS:

ARGALAIR ASTRA COMPACT SERIES AIR OPERATED DOUBLE DIAPHRAGM PUMPS

STANDARD FEATURES: SELF PRIMING SUBMERSIBLE OR DRY MOUNT VARIABLE FLOW RATES & DISCHARGE PRESSURES DEAD HEAD WITHOUT DAMAGE RUN DRY WITHOUT DAMAGE HIGH SOLIDS HANDLING VISCOUS LIQUIDS HANDLING CORROSIVE LIQUIDS HANDLING GENTLE ON SHEAR SENSITIVE FLUIDS 12 MONTH WARRANTY*

Wastewater, chemicals, oils, ink, paint, industrial washing & de-greasing, drum transfer, cleaning products, solvents, lacquers.

Pump Case Material PP, PVDF, POMC, 316SS

Diaphragms Santoprene, Hytrel, PTFE

Balls PTFE, 316SS

Ball Seats PP, PVDF, POMC, 316SS

O-Rings EPDM, Viton, NBR, PTFE

Hazardous Area ATEX Zone 2 Rating Versions


Model Flow Rate (LPM)

Maximum Head (m)

Fluid Connections

Maximum Solids Size

DDA25-09 9 80 1/4” BSP 2.5mm

DDA38-18 18 80 3/8” BSP 3mm

DDA50-30 30 80 1/2” BSP 3.5mm

APPLICATIONS INCLUDE:

Page 1 - Section 7


Catalogue 2017


7

CATALOGUE SECTION 7 — AIR OPERATED DOUBLE DIAPHRAGM PUMPS

SECTION 7


PAGE 2 2017

ARGAL ASTRA SERIES AIR OPERATED DOUBLE DIAPHRAGM PUMPS

Model Max Press (m)

Max Capacity (L/min) Connections Solids Size

(MAX)

DDA 50-50 80 50 1/2” BSP 3.5mm

DDA 50-65 80 65 1/2” BSP 3.5mm

DDA 75-100 80 100 1/2” BSP 3.5mm

DDA 100-100 80 100 1” BSP 3.5mm

DDA 100-160 80 160 1” BSP 7.5mm

DDA 125-250 80 250 1-1/4” BSP 7.5mm

DDA 150-500 80 500 1-1/2” BSP 8.5mm

DDA 200-650 80 650 2” BSP 8.5mm

Wastewater, chemicals, oils, ink, paint, industrial washing & de-greasing, drum transfer, sand slurries, cleaning products, solvents, lacquers, chemical transfer, sump pump.


PUMP MODELS:

OPTIONS:

Pump Case Material PP,PVDF, Aluminium, 316SS

Diaphragms EPDM, NBR, PTFE, Santoprene, Hytrel

Balls EPDM, NBR, PTFE, 316SS

Ball Seats PVDF, 316SS, Aluminium, PE, PP, UPPE

O-Rings EPDM, Viton, NBR, PTFE

Hazardous Areas ATEX Zone 1 Rated Versions

STANDARD FEATURES: SELF PRIMING SUBMERSIBLE OR DRY MOUNT VARIABLE FLOW RATES & DISCHARGE PRESSURES DEAD HEAD WITHOUT DAMAGE RUN DRY WITHOUT DAMAGE HIGH SOLIDS HANDLING VISCOUS LIQUIDS HANDLING CORROSIVE LIQUIDS HANDLING GENTLE ON SHEAR SENSITIVE FLUIDS 12 MONTH WARRANTY*


Section 7 - Page 2


Catalogue 2017

7


SECTION 7


PAGE 3 2017

ARGAL ASTRAFOOD SERIES AIR OPERATED DOUBLE DIAPHRAGM PUMPS

STANDARD FEATURES: DESIGNED FOR TRANSFER OF FLUIDS IN THE

FOOD & BEVERAGE INDUSTRY MANUFACTURED WITH MATERIALS &

COMPONENTS COMPLIANT WITH FDA REGULATIONS

VISCOSITIES UP TO 50,000CPS ATEX ZONE 2 RATING 12 MONTH WARRANTY*

Model Max Press (m)

Max Capacity (L/min) Connections

DFA38-18 80 18 1/2” Tri-Clamp or BSP

DFA 50-30 80 30 1” Tri-Clamp or BSP



DFA 125-250 80 250 11/2” Tri-Clamp or BSP

DFA150-500 80 500 21/2” Tri-Clamp

DFA 200-650 80 650 21/2” Tri-Clamp or BSP

Jams, jellies, creams, fondants, sauces, honey, marmalade, peanut butter, fruit juice, syrups, oils, yeast, decanting wine, bottling, hops, yeast slurries, animal products, fish oil, fish scales, food additives, food colourings, butter.


PUMP MODELS:

OPTIONS:

Pump Case Material Polished 316SS

Diaphragms PTFE Coated Hytrel

Balls PTFE, 316SS

Ball Seats 316SS

O-Rings PTFE


Page 3 - Section 7


Catalogue 2017


7

C�� S�� 7 � A�� P��

S�� 7

PO B�� 300-596, A��, A�� 0752, N�� 09 281 1865 [email protected]

P�� 2017

A��AL M�� S�� A�� P��

S�� D�� E�� H�� D��

A�� C�� O�� P�� B�� 316L �L�� C�� E�� R�� C�� ATE� �� 1 R�� 12 M��

Model Max Press (m)

Max Capacity (L/min) Connections

MISTRAL 200 70 680 DN50 flange

MISTRAL 300 70 1100 DN80 Flange

MISTRAL 400 70 1280 DN100 Flange

Solids Size (MAX)

9mm

11mm

13mm

Oil, seawater, chemicals, cement mixer waste, de-watering.


P�� M��

�� Pump Case Material 316SS, 316L, Bronze

Diaphragms EPDM, NBR, Hytrel, Santoprene, PTFE

Balls EPDM, NBR, PTFE, 316L

Ball Seats EPDM, NBR, 316L, UPPE, PVDF

O-Rings EPDM, NBR, FKM, FEP

A��

Section 7 - Page 4


Catalogue 2017

7


SECTION 7


PAGE 5 2017

ARGAL AIRSATURN SERIES AIR OPERATED DOUBLE DIAPHRAGM PUMPS

STANDARD FEATURES: DESIGNED FOR HEAVY DUTY APPLICATIONS 316L CENTRE BLOCK NON METALLIC COMPONENTS IN CONTACT

WITH THE LIQUID EXTREMELY RESISTANT TO CORROSION ABRASION RESISTANT WIDE TEMPERATURE RANGE 12 MONTH WARRANTY*

Model Max Press (m)

Max Capacity (L/min) Connections Solids Size

(MAX)

AIRSATURN 300 70 1100 DN80 Flange 11

AIRSATURN 400 70 1280 DN100 Flange 13

Chemicals transfer, chemical wastewater, seawater applications.


PUMP MODELS:

OPTIONS:

Pump Case Material 316SS, FRP

Diaphragms EPDM, NBR, Santoprene, PTFE

Balls EPDM, NBR, PTFE, 316L

Ball Seats EPDM, NBR, 316L, UPPE, PVDF

O-Rings EPDM, NBR, FKM, FEP

INSERT PICTURE HERE


Page 5 - Section 7


Catalogue 2017


7


SECTION 7


PAGE 6 2017

ARGAL SELENE PNEUMATIC PULSATION DAMPENERS

STANDARD FEATURES: ACTIVE PNEUMATIC PULSATION DAMPENER REDUCES PRESSURE SPIKES & NOISE 8 BAR (MAX) BSP CONNECTIONS

Model Connections Use With Pumps

PDA 75 3/4” DDA25-09, DDA38-18, DDA50

PDA 100 1” DDA75-100, DDA100-100

PDA 150 1-1/2” DDA100-160, DDA125-250

PDA 200 2” DDA150-500, DDA200-650, MISTRAL200


MODELS:

OPTIONS:

Pump Case Material PP, PVDF, POMC, 316SS

Diaphragms PTFE, Santoprene, Keyflex

Balls EPDM, NBR, PTFE, 316SS

Hazardous Areas ATEX Zone 1 Rated Versions

Selene Pulsation Dampeners do not need tuning or pre-loading. They are self adaptive and can dampen the amplitude of pulsations by up to 90%.

Section 7 - Page 6


Catalogue 2017

7


SECTION 7


PAGE 7 2017

FLOW CURVES

DDA 25-09 FLOW CURVE






Page 7 - Section 7


Catalogue 2017


7


SECTION 7


PAGE 8 2017

FLOW CURVES






Section 7 - Page 8


Catalogue 2017

Section 8MeaSureMent & control

8

CATALOGUE—2017

2017


INDEX

JC SERIES PANEL MOUNT CONTROLLERS PAGE 1

J DIGITAL SERIES RACK MOUNT CONTROLLERS PAGE 2

DIN DIGITAL DIN RAIL MOUNTING CONTROLLERS PAGE 3

LD SERIES WALL MOUNTING CONTROLLERS PAGE 4

LD ENCODER SERIES SINGLE WALL MOUNTING CONTROLLERS PAGE 5

LD PLUS SERIES WALL MOUNTING CONTROLLERS PAGE 6

LD ENCODER SERIES DUPLEX WALL MOUNTING CONTROLLERS PAGE 7

MAX5 CONTROLLER PAGE 8

MTOWER COOLING TOWER CONTROLLERS PAGE 9

PH ELECTRODES PAGE 10 & 11

REDOX (ORP) ELECTRODES PAGE 12

CHLORINE / CHLORINE DIOXIDE SENSORS PAGE 13

CHLORINE / HYDROGEN PEROXIDE / OZONE / PARACETIC ACID SENSORS PAGE 14

CHLORINE / CHLORINE DIOXIDE / BROMINE SENSORS PAGE 15

CHLORINE SENSOR SPARE PARTS PAGE 16

GRAPHITE CONDUCTIVITY PROBES PAGE 17

INOX CONDUCTIVITY PROBES WITH STAINLESS ELECTRODES PAGE 18

STAINLESS STEEL CONDUCTIVITY PROBES PAGE 19

HIGH LINEARITY CONDUCTIVITY PROBES, INDUCTIVE CONDUCTIVITY PROBES PAGE 20

MISCELLANEOUS SENSORS—TEMPERATURE, TURBIDITY, DISSOLVED OXYGEN PAGE 21

PROBE HOUSINGS PAGE 22

OFF-LINE PROBE HOUSINGS PAGE 23

COOLING TOWER ACCESSORIES PAGE 24

SECTION 8—MEASUREMENT & CONTROL



Catalogue 2017


8

CATALOGUE SECTION 8 — MEASUREMENT & CONTROL

SECTION 8


PAGE 1 2017

OPTIONS:

MODELS:

EMEC JC SERIES RACK MOUNT CONTROLLER

Model Function

JC PH Digital pH meter (from 0-14 pH). Automatic temperature compensation, with two on/off or PWM (Pulse Width Modulated) set-points, and a 4-20mA output signal for remote indication or recording.

JC RH Digital Redox (ORP) meter (0-1000 mV), with two on/off or PWM set-points, and a 4-20mA output signal for remote indication or recording.

JC CL Digital chlorine meter (total chlorine, free chlorine, chlorine dioxide, hydrogen peroxide, ozone, bromine, peracetic acid), with two on/off or PWM set-points, and a 4-20mA output signal for remote indication or recording.

JC CD Digital conductivity control (0-20, 0-200, 0-2000uS, 0-20, 0-200mS), with two on/off or PWM set-points, and a 4-20 mA output signal for remote indication or recording.

STANDARD FEATURES: 96MM X 96MM PANEL MOUNT MEASURING

INSTRUMENT BACKLIT LCD DISPLAY TWO ON/OFF OR PWM CONTROL RELAYS FLOW ALARM 4-20MA SIGNAL OUT FOR MEASURED VALUE PROBES SUPPLIED SEPARATELY 2 YEAR WARRANTY*


9-18VDC, 18-36VDC, 110VAC, 230VAC

Temperature compensation for pH or Conductivity

Page 1 - Section 8


Catalogue 2017


8


SECTION 8


PAGE 2 2017

MODELS:

EMEC J DIGITAL SERIES RACK MOUNTED CONTROLLER

Model Function

J DIGITAL PH Digital pH meter (from 0-14 pH). Automatic temperature compensation, with two on/off or PWM (pulse width modulated) set-points, and a 4-20mA output signal for remote indication or recording.

J DIGITAL RH Digital Redox (ORP) meter (0-1000 mV), with two on/off or PWM set-points, and a 4-20mA output signal for remote indication or recording.

J DIGITAL CL Digital Chlorine meter (Total chlorine, free chlorine, hydrogen peroxide, bromine, peracetic acid), with two on/off or PWM set-points, and a 4-20mA output signal for remote indication or recording.

J DIGITAL CD Digital conductivity control (0-20, 0-200, 0-2000uS, 0-20, 0-200mS), automatic temperature compensation, with two on/off or PWM set-points, and a 4-20mA output signal for remote indication or recording.

J DIGITAL O3 Digital Ozone meter (0-1 or 0-10PPM), with two on/off or PWM set-points, and a 4-20mA output signal for remote indication or recording.

J DIGITAL O2 Digital Dissolved Oxygen meter (0-60PPM), with two on/off or PWM set-points, and a 4-20mA output signal for remote indication or recording.

J DIGITAL CLO2 Digital Chlorine Dioxide meter (0-2 or 0-20PPM), with two on/off or PWM set-points, and a 4-20mA output signal for remote indication or recording.

J DIGITAL TEMP Digital Temperature meter (0-100 degrees C), with two on/off or PWM set-points, and a 4-20mA output signal for remote indication or recording.

STANDARD FEATURES: 96MM X 48MM RACK OR PANEL MOUNT

MEASURING INSTRUMENT BACKLIT LCD DISPLAY TWO ON/OFF OR PWM CONTROL RELAYS FLOW ALARM 4-20MA OUTPUT FOR MEASURED VALUE PROBES SUPPLIED SEPARATELY 2 YEAR WARRANTY*


Section 8 - Page 2


Catalogue 2017


8


SECTION 8


PAGE 3 2017

MODELS:

EMEC DIN DIGITAL SERIES DIN RAIL MOUNTED CONTROLLER

Model Function

DIN DIGITAL PH Digital pH meter (from 0-14 pH). Automatic temperature compensation, two on/off or PWM (pulse width modulated) set-points, and a 4-20mA output signal proportional to read value.

DIN DIGITAL RH Digital Redox (ORP) meter (0-1000 mV). Two on/off or PWM set-points, and a 4-20mA output signal proportional to read value.

DIN DIGITAL CL Digital Chlorine meter (Total chlorine, free chlorine, hydrogen peroxide, bromine, peracetic acid). Two on/off or PWM set-points, flow alarm, 4-20mA output signal proportional to read value.

DIN DIGITAL CD Digital conductivity control (0-20, 0-200, 0-2000µS, 0-20, 0-200mS). Automatic temperature compensation, with two on/off or PWM set-points, and a 4-20mA output signal proportional to read value.

DIN DIGITAL O3 Digital Ozone Controller (0-1mg/l or 0-10mg/l), with two on/off or PWM set-points, and a 4-20mA output signal proportional to read value.

DIN DIGITAL O2 Dissolved Oxygen Controller (0-60 mg/l), with two on/off or PWM set-points, and a 4-20mA output signal proportional to read value.

DIN DIGITAL CLO2

Digital Chlorine Dioxide Controller (0-2 or 0-20mg/l), with two on/off or PWM set-points, a flow alarm, and a 4-20mA output signal proportional to read value.

DIN DIGITAL TEMP

Digital Temperature Controller (0-100 degrees C), with two on/off or PWM set-points, and a 4-20mA output signal proportional to read value.

STANDARD FEATURES: DIN RAIL MOUNTING MEASURING

INSTRUMENT BACKLIT LCD DISPLAY TWO ON/OFF OR PWM CONTROL RELAYS FLOW ALARM 4-20MA OUTPUT FOR MEASURED VALUE PROBES SUPPLIED SEPARATELY 2 YEAR WARRANTY*


Page 3 - Section 8


Catalogue 2017


8


SECTION 8


PAGE 4 2017

MODELS:

EMEC LD SERIES WALL MOUNTED CONTROLLER

Model Function

LDPH Digital pH meter (0-14 pH). Features two on/off set-points plus two proportional set-points, providing pulse train output for two way pH control via metering pumps, plus 4-20mA read signal out.

LDRH Digital Redox (ORP) meter (0-1000mV). Features two on/off set-points plus two proportional set-points, providing pulse train output for control of 2 metering pumps, plus 4-20mA read signal out.

LDCL Digital Free chlorine meter. Features two on/off set-points plus two proportional set-points, providing pulse train output for the control of metering pumps, plus 4-20mA read signal out.

LDCD Digital Conductivity controller (0-300mS). Features on/off set-point plus proportional set-point, providing pulse train output for the control of metering pumps, plus 4-20mA read signal out.

LDCDHT Digital Conductivity controller (0-300mS). Features on/off set-point plus proportional set-point, providing pulse train output for the control of metering pumps, plus 4-20mA read signal out. Suitable for temperatures up to 200°C.

STANDARD FEATURES: ABS IP65 WALL MOUNTED CONTROLLER 2 ALARM SET-POINT RELAYS 2 ON/OFF OUTPUT RELAYS 2 PROPORTIONAL PULSE OUTPUTS 4-20MA OUTPUT FOR MEASURED VALUE STANDBY INPUT TANK LEVEL INPUT FLOW INPUT PROBE CLEANING OUTPUT DOSING TIMER 2 YEAR WARRANTY*


Section 8 - Page 4


Catalogue 2017


8


SECTION 8


PAGE 5 2017

OPTIONS:

MODELS:

EMEC LD ENCODER SERIES SINGLE READING WALL MOUNTED CONTROLLER

Model Function

LDSPH Digital pH Meter (0-14 pH)

LDSRH Digital Redox (ORP) Meter (0-1000mV)

LDSCL Free chlorine/bromine meter, hydrogen peroxide, ozone, paracetic acid. Range based on probe.

LDSCD Digital Conductivity Controller (0-300µS, 0-3000µS,0-30mS, 0-300mS)

LDSCDIND Digital Controller for Inductive Conductivity (0-3000µS, 0-30mS, 0-300mS)

LDSTORBH Turbidity controller (0-9999NTU)

LDSDO Dissolved Oxygen Controller (20mg/l O2)

LDSTRC Digital Tracer Controller (0-1000ppm)

LDSFL Digital Fluoride Controller (0-3ppm, 0-1000mV)

STANDARD FEATURES:

ABS IP65 WALL MOUNTED CONTROLLER STANDBY INPUT FLOW INPUT TEMPERATURE COMPENSATION WHERE

RELEVANT 2 ON/OFF ALARM RELAYS ON/OFF, PULSE WIDTH PROPORTIONAL OR

PROPORTIONAL PULSE CONTROL PROBE CLEANING OUTPUT DOSING TIMER DATA STORAGE WITH INTERNAL LOGGING 2 YEAR WARRANTY*

Datalogging to USB device

4-20mA signals out for measured value

Remote control by Ethernet. (LAN connection)

Remote control by GSM/GPRS modem (internal) SMS alert, Email alert

MODBUS


Page 5 - Section 8


Catalogue 2017


8


SECTION 8


PAGE 6 2017

OPTIONS:

MODELS:

EMEC LD PLUS SERIES SINGLE READING WALL MOUNTED CONTROLLER

Model Function

LDSPH PLUS Digital pH meter (0-14 pH).

LDSRH PLUS Digital Redox (ORP) meter (0-1000mV).

LDSCL PLUS Digital chlorine meter (Total chlorine, free chlorine, Bromine, Hydrogen Peroxide, Ozone, Paracetic acid.) Range depends upon probe selection.

LDSCD PLUS Digital Conductivity controller (0-300µS, 0-3000µS,0-30mS, 0-300mS).

LDSCDIND PLUS Digital Controller for Inductive Conductivity (0-3000µS, 0-30mS, 0-300mS).

LDSTORBH PLUS Turbidity controller (0-9999NTU).

LDSDO PLUS Dissolved Oxygen controller (20mg/l O2).

LDSTRC PLUS Digital Tracer Controller (0-1000ppm).

LDSFL PLUS Digital Fluoride Controller (0-3ppm, 0-1000mV).

STANDARD FEATURES:

IP65 WALL MOUNTED CONTROLLER EASY CONTROL BY ENCODER WHEEL FLOW CONTROL INTERNAL DATA STORAGE WITH SYSTEM LOG TEMPERATURE COMPENSATION INPUT WHERE

RELEVANT STAND-BY INPUT ALARM OUTPUT ON/OFF, IMPULSIVE PROPORTIONAL, PROPORTIONAL

PWM, FIXED PWM OR PID CONTROL PROBE CLEANING 5 OUTPUT RELAYS (2 SETPOINT; ALARM; PROBE

CLEANING; CIRCULATION) 2 YEAR WARRANTY*


mA Water Meter Input.

Datalogging to USB device.

4-20mA signals out for measured value.

Remote control by Ethernet.

Remote control by GSM/GPRS modem (internal) SMS alert, Email alert, HTTP: remote control).

MODBUS


Section 8 - Page 6


Catalogue 2017


8


SECTION 8


PAGE 7 2017

OPTIONS:

MODELS:

EMEC LD SERIES DUPLEX WALL MOUNTED CONTROLLER

STANDARD FEATURES:

ABS IP65 WALL MOUNTING CONTROLLER TWO PARAMETERS EASY CONTROL BY ENCODER WHEEL FLOW CONTROL INTERNAL STORAGE WITH SYSTEM LOG TEMPERATURE COMPENSATION WHERE RELEVANT STANDBY INPUT ON/OFF, IMPULSIVE PROPORTIONAL, PROPORTIONAL

PWM OR FIXED PWM CONTROL ALARM OUTPUT 2 YEAR WARRANTY*

Model Function

LDPHRH Digital pH meter (from 0-14pH), and redox meter (from 0-1000mV)

LDPHCL Digital pH meter (from 0-14pH), and Chlorine meter (configurable for Bromine)

LDPHCLH Digital pH meter (from 0-14pH), and Chlorine meter (with PID Control)

LDPHCD Digital pH meter (from 0-14pH), and Conductivity

LDPHCDIND Digital pH meter (from 0-14pH), and Inductive Conductivity

LDPHTORBH Digital pH meter (from 0-14pH), and Turbidity

LDPHTRC Digital pH meter (from 0-14pH), and Tracer

LDPHFL Digital pH meter (from 0-14pH), and Fluoride

When ordering you can specify any custom parameter combination.


4-20mA signals out for measured value

Remote control by Ethernet (LAN connection)

Remote control by GSM/GPRS modem (internal) SMS alert, Email alert

MODBUS


Page 7 - Section 8


Catalogue 2017


8


SECTION 8


PAGE 8 2017

OPTIONS:

EMEC MAX5 SERIES WALL MOUNTED CONTROLLER

STANDARD FEATURES:

MEASURE & CONTROL 5 PARAMETERS SIMULTANEOUSLY

SPECIFY YOUR REQUIREMENTS, SELECTING FROM: PH, REDOX, CHLORINE, CHLORINE DIOXIDE, OZONE, HYDROGEN PEROXIDE, PERACETIC ACID, TURBIDITY, CONDUCTIVITY, DISSOLVED OXYGEN OR TEMPERATURE

ABS IP65 WALL MOUNTING ENCLOSURE EASY CONTROL BY ENCODER WHEEL 6 SET-POINT RELAYS ON/OFF, PULSE WIDTH, PROPORTIONAL OR

PID CONTROL STANDBY INPUT 5 TANK LEVEL INPUTS 5 TIMERS BUILT IN WATER METER INPUT ALARM OUTPUT 2 YEAR WARRANTY*


6 x mA Signals out for measured values

Datalogging to USB

Remote control by Ethernet

Remote control by GPRS

MODBUS

Example of the MAX5, Pumps & Probes

mounted on a back plate.

Section 8 - Page 8


Catalogue 2017


8


SECTION 8


PAGE 9 2017

OPTIONS:

MODELS:

EMEC MTOWER COOLING TOWER CONTROLLER

STANDARD FEATURES:

IP65 WALL MOUNTING ENCLOSURE EASY CONTROL BY ENCODER WHEEL CONDUCTIVITY MEASUREMENT 2 BIOCIDE PUMP OUTPUTS 2 BIOCIDE ACTIVATOR OUTPUTS BLEED VALVE CONTROL INHIBITOR PUMP CONTROL MAKEUP FLOW METER INPUT BLEED FLOW METER INPUT STANDBY INPUT CHEMICAL TANK LEVEL INPUTS PRE-BLEED & BLEED LOCKOUTS TEMPERATURE INPUT ALARM OUTPUT 2 YEAR WARRANTY*

Model Function

MTOWER CD Base Model with features as described above

MTOWER CD/RH Same as CD but with fully functional redox controller built in

MTOWER CD/PH Same as CD but with fully functional pH controller built in

MTOWER CD/CL Same as CD but with fully functional Chlorine controller built in

MTOWER PLUS CD/PH/RH Same as CD but with fully functional Redox and pH controllers built in

MTOWER PLUS CD/PH/CL Same as CD but with fully functional pH and Chlorine controllers built in

mA Signals out for measured values


Remote control by Ethernet (USB connection for direct PC connection)

ERMES Web Communication

MODBUS


Page 9 - Section 8


Catalogue 2017


8


SECTION 8


PAGE 10 2017

PH ELECTRODE MODEL - EPHSC

PH ELECTRODE MODEL - EPHM/HF

PH ELECTRODE MODEL - EPHMD/100

PH ELECTRODE MODEL - EPHM/D

PH ELECTRODE MODEL - EPH

PH SENSORS

Description Single junction epoxy shaft pH electrode (pH 0-14). Max pressure 7 bar at 70 ºC. 12mm dia. Minimum conductivity 100µS.

Applications Potable water, swimming pools, laboratory use.

EPHS With 0.8 meter cable and BNC connector.

EPHM With 4.5 meter cable and BNC connector.

EPHL With 15 meter cable and BNC connector.

Description Double junction epoxy shaft pH electrode (pH 0-14). Max pressure 7 bar at 70ºC. 12mm dia. Minimum conductivity 1 µS.

Applications As above plus wastewater e.g. electroplating, and medias containing proteins, silver or sulphides. Also suitable for high purity water.

EPHM/D With 4.5 meter cable and BNC connector.

Description Epoxy shaft pH electrode (0-14 pH) with flat end and self cleaning action. Max pressure 7 bar at 70ºC. 12mm dia. Minimum 100µS.

Applications High solids wastewater, mount in flow path for self cleaning action.

EPHSC With 4.5 meter cable and BNC connector.

Description Double junction epoxy shaft pH electrode (0-14 pH) with 12mm dia. Minimum 100uS. 7 bar/Max 70°C.

Applications Hydrogen fluoride resistant.

EPHM/HF 4.5 m cable and BNC connector.

Description Double junction epoxy shaft pH electrode (0-14 pH) Max pressure 7 bar at 100°C, 12mm dia. Minimum 100uS.

Applications Wastewater e.g. electroplating, and medias containing proteins, silver or sulphides. Suitable for high temperature wastewater applications.

EPHMD/100 With 4.5 metre cable with BNC connector.


Section 8 - Page 10


Catalogue 2017


8


SECTION 8


PAGE 11 2017

ACCESSORIES FOR ORP AND PH PROBES INSTALLATIONS

PH ELECTRODE MODEL - EPHSN6, EPHM/D/SN6, EPHSC/SN6

CASN6S BNC/SN6 cable for ERHSN6 probe. 5m.

CASN6M BNC/SN6 cable for ERHSN6 probe. 10m.

CASN6L BNC/SN6 cable for ERHSN6 probe. 15m.

GHIERA PG13.5 threading nut for ORP probes, with O-ring.

Description Epoxy shaft pH electrode (0-14 pH) with PG13.5 mounting thread and SN6 connector.

EPHSN6 7 bar 70°C, Min conductivity 100 µS.

EPHM/D/SN6 Double junction, 7 bar 70°C, Min conductivity 1 µS.

EPHSC/SN6 7 bar 70°C, Min conductivity 100 µS, self cleaning (flat tip).

PH SENSORS


Page 11 - Section 8


Catalogue 2017


8


SECTION 8


PAGE 12 2017

REDOX ELECTRODE MODEL - ERHSN6, ERHSC/SN6

REDOX ELECTRODE MODEL - ERHSC

REDOX ELECTRODE MODEL - ERHMD/100

REDOX ELECTRODE MODEL - ERHM/D

REDOX ELECTRODE MODEL - ERH

REDOX (ORP) SENSORS

Description Single junction epoxy shaft Redox electrode. Max pressure 7 bar at 70ºC. 12mm dia. 100µS minimum.


ERHS With 0.8 meter cable and BNC connector.

ERHM With 4.5 meter cable and BNC connector.

ERHL With 15 meter cable and BNC connector.

ERHHL Special single junction probe for low chlorine and pure water applications. 10 meter cable, BNC connector, glass shaft, 6 Bar 80ºC.

Description Double junction epoxy shaft Redox electrode. Max pressure 7 bar at 70ºC. 12mm dia. 1µS minimum.

Applications As above plus low solids wastewater eg: electroplating, medias containing proteins, silver or sulphides. Suitable for high purity water.

ERHM/D With 4.5 meter cable and BNC connector.

Description Epoxy shaft Redox electrode with flat end and self cleaning action. Max pressure 7 bar at 70ºC. 12mm dia. Minimum 100uS.

Applications High solids wastewater, mount in flow path for self-cleaning action.

ERHSC With 4.5 meter cable and BNC connector.

Description Epoxy shaft Redox electrode. Max pressure 7 bar at 70ºC. 12mm dia. Minimum 100uS.


ERHSN6 With PG13.5 mounting thread and SN6 connector.

ERHSC/SN6 Self Cleaning double junction version.

Description Double junction epoxy shaft Redox electrode. Max pressure 7 bar at 100ºC. 12mm dia. 100µS minimum.

Applications As above plus low solids wastewater eg: electroplating, medias containing proteins, silver or sulphides. Suitable for high temperature wastewater applications.

ERHMD/100 With 4.5 meter cable and BNC connector.


Section 8 - Page 12


Catalogue 2017


8


SECTION 8


PAGE 13 2017

FREE CHLORINE PROBE MODEL - ECL7


TOTAL CHLORINE PROBE MODEL - ECL3

CHLORINE DIOXIDE PROBE MODEL - ECL2


CHLORINE SENSORS

Description

Closed amperometric Free Chlorine Cell (inorganic) for use with Sodium Hypochlorite, Calcium Hypochlorite and chlorine gas applications. Max pressure 1 bar, maximum temperature 40ºC. Automatic temperature compensation.

Applications Potable water, swimming pools, spa pools, laboratory use.

Ranges available: 0-2mg/l, 0-5mg/l, 0-20mg/l, 0-200mg/l

Description Closed amperometric Cell for Chlorine Dioxide measurement. Max pressure 1 bar, max temperature 40ºC. Automatic temperature compensation.

Applications Potable water, swimming pools, breweries, food processing.

Ranges available: 0-2mg/l, 0-20mg/l

Description Closed amperometric Chlorine Cell with pH compensation. Max pressure 1 bar, max temperature 40ºC. Automatic temperature compensation.

Applications Swimming pools where chlorine stabilizers are used.

ECL3S/10 Range: 0-10mg/l Total Chlorine

ECL3N Range: 0-2, 0-10, 0-200mg/l Free Chlorine

Description Open amperometric Free Chlorine Cell (organic and inorganic). Integral Flow rate control. Includes 2 x electrode holders for pH, Redox or temperature probe. With flow switch model SEPR.


Range: 1-10mg/l

Options ECL6/E - Budget version without additional electrode holders.

Description Open amperometric Free Chlorine Cell as ECL6, but manufactured to hold PG13.5 mounting versions of pH, Redox and temperature probes.


Range: 0-10mg/l


Page 13 - Section 8


Catalogue 2017


8


SECTION 8


PAGE 14 2017

CHLORINE PROBE MODEL - ECL12

PERACETIC ACID PROBE MODEL - ECL11

OZONE CELL MODEL - ECL10

HYDROGEN PEROXIDE CELL MODEL - ECL9

TOTAL CHLORINE PROBE MODEL - ECL8

CHLORINE, HYDROGEN PEROXIDE, OZONE & PERACETIC ACID SENSORS

Description Amperometric Total Chlorine Cell (organic and inorganic). Max pressure 1 bar, max temperature 40ºC. Automatic temperature compensation.


Range: 0-2 mg/l, 0-20 mg/l

Description Hydrogen Peroxide probe, max temperature 40ºC.

Applications Potable water, industrial processes, laboratory use.

Ranges: 0-200 mg/l,0-2000 mg/l

Description Ozone Cell , Max pressure 1bar, max temperature 40ºC.

Applications Potable water, swimming pools, industrial processes, salt water.

Range: 0-0.5 mg/l, 0-10 mg/l. Temperature compensated.

Description Amperometric Peracetic acid Cell. Max pressure 1 bar, max temperature 40ºC. Automatic temperature compensation.

Applications CIP systems.

ECL 11/200 Range: 0-200 mg/l

ECL 11/2000 Range: 0-2000 mg/l

Description Amperometric Free Chlorine Cell for salt water applications as ECL6, manufactured to hold pH, Redox and temperature probes.

Applications Salt water swimming pools.

Range: 0-10mg/l

Options ECL12/E - no additional probe mounting.


Section 8 - Page 14


Catalogue 2017


8

C��

��

PO B�� 00-596, A��, A�� 0752, �� 09 281 1865 [email protected]

�� 1� 2017

��

��

�� 17 � ��

�� 1� � ��

��

Description Closed amperometric Free Chlorine Cell (inorganic) for use with Sodium Hypochlorite, Calcium Hypochlorite and chlorine gas applications. Max pressure 8 bar, 5 -70ºC. Automatic temperature compensation.

Applications Potable water, industrial processes.

ECL18/2 Range: 0-2 mg/l

ECL 18/10 Range: 0-10 mg/l

Description Closed amperometric cell for Chlorine Dioxide measurement . Max pressure 8 bar, 5 -70ºC. Automatic temperature compensation.




Description Closed amperometric cell for Bromine measurement. Automatic temperature compensation. Max pressure 1bar, maximum temperature 40ºC.


EBR Range: 0-20 mg/l


Description Electrode for measurement of Chlorine, Chlorine Dioxide, Ozone. -5 to 70 degrees C, 16 BAR at 20 degrees C

Applications Potable water, industrial processes, wastewater.

EPS Range: 0-20 mg/l

Page 15 - Section 8


Catalogue 2017


8


SECTION 8


PAGE 16 2017

REPLACEMENT ELECTRODES

REPLACEMENT MEMBRANE CAPS

ELECTROLYTE FOR AMPEROMETRIC PROBES

CHLORINE SENSOR SPARE PARTS

Description For Refilling Membrane Style Amperometric Cells

ELECL1 Electrolyte for ECL1


ELECL3N Electrolyte for ECL3N (fresh water)

ELECL3S Electrolyte for ECL3S (fresh water)

ELECL3N/SEA Electrolyte for ECL3N (salt water)

ELECL3S/SEA Electrolyte for ECL3S (salt water)




ELEC11 Electrolyte for ECL11



ELEBR Electrolyte for EBR

Description Replacement Membrane Caps for Amperometric Cells

MECL1-2 Spare Membrane cap for ECL1 & ECL2

MECL3 Spare Membrane cap for ECL3

MECL8/20 Spare Membrane cap for ECL8/20

MECL8/2 Spare Membrane cap for ECL8/2




MEBR Spare Membrane cap for EBR

Description Replacement Electrodes for Amperometric Chlorine Sensors

ELE/PR Platinum & Copper electrodes for cell ECL6/7

ELE12 Platinum & Silver electrodes for cell ECL12

ELE/P Platinum electrode for ECL4 and ECL5

ELE/A Silver electrode for ECL5

ELE/R Copper electrode for ECL4

BIG2 Glass balls for ECL4/5/6/7 cells


Section 8 - Page 16


Catalogue 2017


8


SECTION 8


PAGE 17 2017

CONDUCTIVITY PROBE MODEL - ECDC20

CONDUCTIVITY PROBE MODEL - ECDCIM

CONDUCTIVITY PROBE MODEL - ECDCC

CONDUCTIVITY PROBE MODEL - ECDC

GRAPHITE CONDUCTIVITY PROBES

Description Conductivity probe with Graphite electrodes, PVDF body, 3/4” BSP thread, 4m cable, BNC plug, maximum pressure 7 bar at 60ºC.

ECDC/1 K=1, Maximum 20mS

ECDC/10 K=10, Maximum 200mS

Options Longer lead on request. 1/2” on request.

Description Conductivity probe, immersion style, with Graphite electrodes, PVDF body, 1/2” BSP thread, 4m cable, BNC plug, maximum pressure 7 bar at 60ºC.

ECDCIM/1 K=1, Maximum 20mS

ECDCIM/10 K=10, Maximum 200mS

Options Temperature compensation. longer lead on request, 1/2” on request.

ECDC20 K=1, Maximum 20mS, threaded with lock nut for through tank mounting

Options Longer lead on request.

Description Conductivity probe with Graphite electrodes, PVDF body, 3/4” BSP thread, 4m cable, BNC plug, maximum pressure 7 bar at 60ºC. Temperature compensation.

ECDCC/1 K=1, Maximum 20mS, NTC10k temp sensor

ECDCCPT/1 K=1, Maximum 20mS, PT100 temp sensor

ECDCC/10 K=10, Maximum 200mS, NTC10k temp sensor

ECDCCPT/10 K=10, Maximum 200mS, PT100 temp sensor

Options Longer lead on request. 1/2” on request.


Page 17 - Section 8


Catalogue 2017


8


SECTION 8


PAGE 18 2017

CONDUCTIVITY PROBE MODEL - ECDIIM

CONDUCTIVITY PROBE MODEL - ECDIC

CONDUCTIVITY PROBE MODEL - ECDI

Description Conductivity probe with Stainless Steel electrodes, PVDF body, 3/4” BSP thread, 4m cable, BNC plug, maximum pressure 7 bar at 60ºC.

ECDI/1 Maximum 5mS

ECDI/02 Maximum 500µS

ECDI/01 Maximum 200µS

Options Longer cable on request.

INOX CONDUCTIVITY PROBES WITH SS ELECTRODE

Description Conductivity probe immersion style, with Stainless Steel electrodes, PVDF body, 3/4” or 1/2” BSP thread, 4m cable, BNC plug, maximum pressure 7bar at 60ºC.

ECDIIM/1 Maximum 5mS

ECDIIM/0.2 Maximum 500µS

ECDIIM/01 Maximum 200µS

Options Available with temperature compensation, high temperature version, longer cable on request.

Description Conductivity probe with Stainless Steel electrodes, PVDF body, 3/4” BSP thread, 4m cable, BNC plug, maximum pressure 7 bar at 60ºC, temperature compensation.

ECDIC/1 Maximum 5mS, NTC 10k temp sensor

ECDICPT/1 Maximum 5mS, PT100 temp sensor

ECDIC/02 Maximum 500µS, NTC 10k temp sensor

ECDICPT/02 Maximum 500µS, NTC PT100 sensor

ECDIC/01 Maximum 200µS NTC 10k sensor

ECDICPT/01 Maximum 200µS PT 100 temp sensor



Section 8 - Page 18


Catalogue 2017


8


SECTION 8


PAGE 19 2017

CONDUCTIVITY PROBE MODEL - EICDHPT STAINLESS BODY

CONDUCTIVITY PROBE MODEL - EICDCPT STAINLESS BODY

CONDUCTIVITY PROBE MODEL - EICDC STAINLESS BODY

STAINLESS STEEL CONDUCTIVITY PROBES

Description

High temperature range conductivity probe with Stainless Steel electrodes, SS body, 3/4” BSP thread, 4m cable, BNC plug, maximum pressure 15 bar at 200ºC, PT100 temperature compensation.

EICDHPT/1 Maximum 20mS

EICDHPT/0.1 Maximum 200µS

EICDHPT/001 Maximum 20µS


Description Conductivity probe with Stainless Steel electrodes, 3/4” BSP thread, 4m cable, maximum pressure 15 bar at 130ºC, NTC 10k temperature compensation.

EICDC/1 Maximum 20mS

EICDC/01 Maximum 200µS

EICDC/001 Maximum 20µS


Description Conductivity probe with Stainless Steel electrodes, 3/4” BSP thread, 4m cable, maximum pressure 15 bar at 130ºC, PT100 temperature compensation.

EICDCPT/1 Maximum 20mS

EICDCPT/01 Maximum 200µS

EICDCPT/001 Maximum 20µS



Page 19 - Section 8


Catalogue 2017


8


SECTION 8


PAGE 20 2017

CONDUCTIVITY PROBE MODEL - ECDINDPT

CONDUCTIVITY PROBE MODEL - ECDHLCPT

CONDUCTIVITY PROBE MODEL - ECDHLC

CONDUCTIVITY PROBE MODEL - ECDHL

Description Conductivity probe with platinum electrode, 12mm dia, 4.5m cable, maximum pressure 7 bar at 70ºC

ECDHL/01 K=0.1, Maximum conductivity 200µS

ECDHL/1 K=1, Maximum conductivity 20mS

ECDHL/10 K=10, Maximum conductivity 200mS

Description High linearity conductivity probe with platinum electrode, 4.5m cable, maximum pressure 7 bar at 70ºC , NTC10k temperature compensation.

ECDHLC/01 K=0.1, Maximum conductivity 200µS

ECDHLC/1 K=1, Maximum conductivity 20mS

ECDHLC/10 K=10, Maximum conductivity 200mS

HIGH LINEARITY CONDUCTIVITY PROBES

An enormous range of conductivity probes are available. There are too many to list. Please enquire for assistance to choose a probe to suit your process.

Description All plastic construction, no metallic or conductive materials in contact with fluid, with PT100 temperature compensation, max pressure 8 bar max temp 85°C.

ECDINDPT Specify range 0-3mS, 0-30mS, 0-300mS

Pair with LDCDIND controller pg 4

Pair with PEL-IND in line probe holder pg 23

ECDSINDPT 0-10mS (compact probe)

Description High linearity conductivity probe with platinum electrode, 4.5m cable, maximum pressure 7 bar at 70ºC , PT100 temperature compensation.

ECDHLCPT/01 K=0.1, Maximum conductivity 200µS

ECDHLCPT/1 K=1, Maximum conductivity 20mS

ECDHLCPT/10 K=10, Maximum conductivity 200mS


Section 8 - Page 20


Catalogue 2017


8


SECTION 8


PAGE 21 2017

DISSOLVED OXYGEN SENSOR MODEL - EOLUM

TURBIDITY SENSOR MODEL - ETORBH

TURBIDITY SENSOR MODEL - ETORB40

TEMPERATURE PROBE MODEL - ETEHLP

MISCELLANEOUS SENSORS

Description High linearity temperature probe with PVDF body, 1/2”threading 0-100ºC, 10 Bar, 1mV=0.1ºC. 4m cable.

ETEHLP With 4m cable

ETEPCH18 NTC10kohm sensor, ECL6 or PEF Holder

ETEPCH18/L NTC 10kohm sensor, NPED PEF22 or PEF23 Holder

ETEPTCH18 PT100 sensor, ECL6 or PEF Holder

ETEPTCH18/L PT100 sensor, ECL6 or NPED or PEF22 or PEF23 Holder

Description Off line Turbidity Sensor, max flow 40 litres per hour, max pressure 0.5 bar.

ETORB40 0-40 NTU

Applications Swimming pools, potable water systems.

Description Self Cleaning turbidity sensor, maximum pressure 6 bar at 25°C (1 bar @ 50°C) internal temperature compensation, 7m cable.

ETORBH 0- 9999 NTU

Description Dissolved Oxygen probe with fluorescence membrane, max pressure 10 bar, -5- 50°C, temperature compensation (PT100), 15m cable.

EOLUM 0-20 mg/l O2


Page 21 - Section 8


Catalogue 2017


8


SECTION 8


PAGE 22 2017

IMMERSION PROBE HOUSING

IN LINE PROBE HOLDERS WITH “T” CONNECTION

IN LINE PROBE HOUSING

PROBE HOUSINGS

Description Immersion Probe Holder, PVC, 1m long.

PEC For 1 electrode 12mm diameter (eg - type EPH). Max 80°C. PP

PEC/SN6 For 1 electrode with PG13.5 mounting thread. Max 80°C. PP

PEC/IM For 1 x conductivity electrode 3/4” thread. Max 80°C. PP

PECAP/SN6 As PEC/SN6 with compressed air or water self cleaning system. Max 40°C. PP/PVC

PEC2 For 2 x 12 mm PG13.5 electrodes. Max 40°C. PVC

PECAP2 As PEC2 with compressed air or water self cleaning. Max 40°C. PVC

PEC-E For ETORBH or EOLUM. Polypropylene. Max 80°C

PEC-IND For ECDINDPT. Max 40°C. PVC

FIXING FLANGES:

FFP Fixing flange for PEC. Diameter 100mm, Height 30mm.

FFP AP Fixing flange for PEC AP. Diameter 100mm, Height 30mm.

Description For insertion into threaded connection in pipe work.

PEA/CH For 12mm epoxy shaft electrodes 1/2” BSP thread, suitable for max 90° at 7 bar or 130°C at 3 bar. PVDF.

PEB For 12mm epoxy shaft electrodes 3/4” BSP thread, suitable for max 90° at 7 bar or 130°C at 3 bar. Polypropylene.

PEA/SN6 For 12mm epoxy shaft with PG13.5 mounting thread and SN6 connector, suitable for max 90°C 7 bar. PVDF.

Description 40mm PVC Tee connection, for inserting a probe into a pipeline.

PEL For 12 mm epoxy shaft electrodes, 1/2” or 3/4” threading, PVDF

PELC As above - saddle connection

PEL-E For ETORBH or EOLUM probe, PVC.

PEL-IND For ECDINDPT probe, max 40°C, 7 bar, PVC

PEL-INDC For ECDINDPT probe, max 80°C, 7 bar, PVCC

PEL-IND-SS For ECDINDPT probe, max 80°C, 7 bar, SS


Section 8 - Page 22


Catalogue 2017


8


SECTION 8


PAGE 23 2017

OFF LINE PROBE HOUSING MODEL

OFF LINE PROBE HOUSING FOR CLOSED AMPEROMETRIC CELLS

Description Off line probe holder to suit closed type chlorine probe. Maximum pressure 5 Bar, maximum temperature 50ºC. PMMA body with 6x8 PVDF Fittings and 4m PE hose.

PEF1 For 2 x 12mm diameter electrodes, 1 temperature probe and 1 x Chlorine probe (e.g. - type ECL1), with SEPR flow switch.

PEF1/E For 1 x chlorine probe (eg - Type ECL1) and 1 temperature probe with SEPR flow switch.

PEF5 For 2 electrodes with PG13 mounting threads, 1 temperature probe and 1 x Chlorine probe (e.g. - type ECL1), with SEPR flow switch.

PEF2 For 2 x 12mm diameter electrodes and 1 temperature probe, with SEPR flow switch.

PEF3 For 2 x electrodes with PG13 mounting threads and 1 temperature probe, with SEPR flow switch.

PEF22 For 2 x 12mm diameter electrodes, 1 temperature probe and 2 Chlorine probes (e.g. - type ECL1), with SEPR flow switch.

PEF23 For 2 x 12mm diameter electrodes, 1 temperature probe and 2 Chlorine probes (e.g. - type ECL1) and 1 conductivity probe (3/4” threading), with SEPR flow switch.

ALSO AVAILABLE:

PEF1/K As PEF1 but with PVDF hose, suitable for 80°C at 5 bar.

PEF1/E/K As PEF1/E but with PVDF hose, suitable for 80° at 5 bar.

OPTION: Integral Anti-siphon valve on request.

Description Off line probe holder, maximum pressure 5 Bar, maximum temperature 40ºC. Fittings - 6x8mm.

NPED2 For 2 x electrodes 12mm diameter (eg - type EPHM/D).

NPED1 For 2 x electrodes with PG13.5 mounting thread.

NPED3 For 2x electrodes12mm diameter plus 1 x 3/4 “ electrode.

NPED4 For 2 x 12mm electrodes, with integral flow sensor.

NPED4/2F For 2 x 12 mm epoxy electrodes with 2 wires for sensor.

NPED4-3/4 As NPED3, with integral flow sensor.

NPED-E For ETORBH or EOLUM electrodes.

NPED-IND For ECDINDPT inductive conductivity probe.

NPED-INDS For ECDINDSPT inductive conductivity probe.

OFF-LINE PROBE HOUSINGS


Page 23 - Section 8


Catalogue 2017


8


SECTION 8


PAGE 24 2017

MANIFOLD FLOW SENSOR SPARES

MULTI-FUNCTION PROBE HOLDER

COOLING TOWER ACCESSORIES

MANIFOLD/E/3 Probe holder for 3/4” conductivity probe, with flow sensor and sample port. 3/4” water inlet.

MANIFOLD/E/1 Probe holder for 3/4” conductivity probe, with flow sensor and sample port. 1” water inlet.

MANIFOLD/3 Probe holder for conductivity probe, with flow sensor, sample port and two injection points. 3/4” water inlet.

MANIFOLD/1 Probe holder for conductivity probe, with flow sensor, sample port and two injection points. 1” water inlet.

MANIFOLD PLUS/3

Probe holder for conductivity probe plus 2 12mm dia probes, with flow sensor and sample port. 3/4” water inlet.

MANIFOLD PLUS/1

Probe holder for conductivity probe plus 2 12mm dia probes, with flow sensor and sample port. 1” water inlet.

SF/BNC Manifold flow sensor with BNC connection.

SEPR Manifold inductive flow sensor for probe holders and open amperometric cells.


Section 8 - Page 24


Catalogue 2017

Section 9chlorine dioxide generatorS

9

CATALOGUE—2017

2017


INDEX INDEX

LOTUS EASY CHLORINE DIOXIDE GENERATORS PAGE 1

LOTUS MINI CHLORINE DIOXIDE GENERATORS PAGE 2

LOTUS MAXI CHLORINE DIOXIDE GENERATORS PAGE 3

LOTUS AIR CHLORINE DIOXIDE GENERATORS PAGE 4

SECTION 9—CHLORINE DIOXIDE GENERATORS



Catalogue 2017


9

CATALOGUE SECTION 9 — CHLORINE DIOXIDE GENERATORS

SECTION 9 PAGE 1 2017



MODELS:

LOTUS EASY CHLORINE DIOXIDE GENERATOR

Food and beverage manufacturing, bottle washing, potable water, process water, produce washing and swimming pools.

Model Capacity Max Press

LOTUS EASY 8 8 (g/h) 8 bar




STANDARD FEATURES: LOW COST OPTION FOR PRODUCING &

DOSING CHLORINE DIOXIDE PROPORTIONAL TO FLOW

SODIUM CHLORITE / HYDROCHLORIC ACID METHOD

INSTANTANEOUS CLO2 PRODUCTION FLOW CONTROL INPUT TANK LEVEL ALARMS WATER METER INPUT STANDBY INPUT SERVICE REMINDER 2 YEAR WARRANTY*


Page 1 - Section 9


Catalogue 2017


9





OPTIONS:

VERSIONS:

MODELS:

LOTUS MINI CHLORINE DIOXIDE GENERATOR

Ethernet connection, GPRS option, Data logging to USB, remote control via the ERMES webserver, MODBUS. GAS detector option.



LOTUS MINI 8 8 (g/h) 8 bar

LOTUS MINI 20 20 (g/h) 8 bar

STANDARD FEATURES:

SODIUM CHLORITE / HYDROCHLORIC ACID METHOD

INSTANTANEOUS CLO2 PRODUCTION WATER INJECTION TO LIMIT THE

CONCENTRATION STRENGTH LEAVING THE REACTION VESSEL

DOSING PROPORTIONAL TO FLOW OR REMOTE CONTROLLED FLOW CONTROL INPUT TANK LEVEL ALARMS WATER METER INPUT STANDBY INPUT INTERNAL DATALOGGING 4-20MA OUTPUT SERVICE REMINDER COLOUR CODED PUMPS & SUCTION LANCES 2 YEAR WARRANTY*

Standard Version

ERH Built in Redox measurement

ECL2 Built in Chlorine Dioxide Measurement

ECL17 Built in Chlorine Dioxide Measurement (high pressure or high temperature)


Section 9 - Page 2


Catalogue 2017


9





OPTIONS:

VERSIONS:

MODELS:

LOTUS MAXI CHLORINE DIOXIDE GENERATOR

Ethernet connection, GPRS option, Data logging to USB, remote control via the ERMES webserver, MODBUS.



LOTUS MAXI 80 80 (g/h) 8 bar






STANDARD FEATURES: SODIUM CHLORITE / HYDROCHLORIC ACID

METHOD INSTANTANEOUS CLO2 PRODUCTION DOSING PROPORTIONAL TO FLOW OR RESIDUAL SET-POINT FLOW CONTROL INPUT TANK LEVEL ALARMS WATER METER INPUT STANDBY INPUT INTERNAL DATALOGGING 4-20MA OUTPUT SERVICE REMINDER COLOUR CODED PUMPS & SUCTION LANCES 2 YEAR WARRANTY*

Standard Version





Page 3 - Section 9


Catalogue 2017


9





OPTIONS:

VERSIONS:

MODELS:

LOTUS AIR CHLORINE DIOXIDE GENERATOR


STANDARD FEATURES: SODIUM CHLORITE / HYDROCHLORIC ACID

METHOD BATCH CHLORINE DIOXIDE PRODUCTION CLO2 MANUFACTURED & STORED AT ATMOSPHERIC PRESSURE FLOW CONTROL INPUT TANK LEVEL ALARMS WATER METER INPUT STANDBY INPUT SERVICE REMINDER 2 YEAR WARRANTY*


LOTUS AIR 10 10 (g/h) 8 bar



Ethernet connection, GPRS option, Data logging to USB, remote control via the ERMES webserver, MODBUS. Gas detector option.

Standard Version





Section 9 - Page 4


Catalogue 2017

Section 10Water SoftenerS

10

CATALOGUE—2017

2017


INDEX INDEX

SECTION 10—WATER SOFTENERS

DELTA ESCALDA WATER SOFTENER, 3L PAGE 1

DELTA TIBERA WATER SOFTENER, 3.3L X 2 PAGE 2

DELTA ONEGA WATER SOFTENER, 9L PAGE 3

DELTA ONEGA DUPLEX WATER SOFTENER, 9L X 2 PAGE 4

DELTA ONTARIO WATER SOFTENER 12L PAGE 5

DELTA ONTARIO DUPLEX WATER SOFTENERS, 12L PAGE 6 & 7

AUTOTROL 268 WATER SOFTENERS PAGE 8

AUTOTROL 298 MAGNUM WATER SOFTENERS PAGE 9

AUTOTROL DUPLEX WATER SOFTENERS PAGE 10



Catalogue 2017


10

CATALOGUE SECTION 10 — WATER SOFTENERS



DIMENSIONS:

APPLICATIONS:

MODELS:

DELTA ESCALDA WATER SOFTENER The Amazing Escalda water softener sets a new standard

for efficiency and performance.

STANDARD FEATURES: ULTRA COMPACT EASY TO INSTALL EASY TO USE NO POWER REQUIRED AUTOMATIC DEMAND BASED REGENERATION USES LESS WATER USES LESS SALT BYPASS VALVE 2 YEAR WARRANTY*

Small enough to fit under a sink bench, the Delta Escalda can soften up to 1500 litres per hour of water. Regenerating automatically as required, the Escalda regenerates in just 15 minutes, using only 18 litres of water and 0.3kgs of salt. The softener sits inside the brine tank for a compact tidy finish.

Model Code Capacity Operating Range

ESCALDA 3L LR 150ppm/m3 50-200ppm Hardness

ESCALDA 3L 150ppm/m3 150-600ppm Hardness

Domestic use, cafés, commercial kitchens, dishwashers, dispensing machines, humidifiers, reverse osmosis pre-treatment, package boilers and cooling tower feed.

240mm (W) x 540mm (L) x 483mm (H)


Page 1 - Section 10


Catalogue 2017


10




DIMENSIONS:

APPLICATIONS:

MODELS:

DELTA TIBERA WATER SOFTENER

Two water softeners in one tidy package. The Tibera Duplex Softener with duty/standby operation provides continuous uninterrupted soft water.

STANDARD FEATURES: ULTRA COMPACT EASY TO INSTALL EASY TO USE NO POWER REQUIRED AUTOMATIC DEMAND BASED REGENERATION CONTINUOUS UNINTERRUPTED SOFT WATER USES LESS WATER USES LESS SALT BYPASS VALVE 2 YEAR WARRANTY*

The Tibera has two 3.3L water softeners mounted inside a brine tank. The Tibera can soften up to 1500 litres per hour of water. Regenerating automatically as required, each softener regenerates in just 15 minutes, using only 18 litres of water and 0.3kgs of salt. Two softeners sit inside one brine tank for a compact tidy finish.

522mm (W) x 518mm (L) x 468mm (H)

Domestic use, Cafés, commercial kitchens, dishwashers, dispensing machines, humidifiers, reverse osmosis pre-treatment, package boilers and cooling tower feed.


TIBERA 3.3L LR 2x150ppm/m3 50-200ppm Hardness

TIBERA 3.3L 2x150ppm/m3 150-600ppm Hardness


Section 10 - Page 2


Catalogue 2017


10




MODELS:

APPLICATIONS:

DIMENSIONS:

DELTA ONEGA WATER SOFTENER

The Delta Onega water softener provides a higher capacity option, with the same controller design for high performance and efficiency.

STANDARD FEATURES: COMPACT EASY TO INSTALL EASY TO USE NO POWER REQUIRED AUTOMATIC DEMAND BASED REGENERATION USES LESS WATER USES LESS SALT BYPASS VALVE 2 YEAR WARRANTY*

276mm (W) x 553mm (L) x 552mm (H)



ONEGA 1x9L 450ppm/m3 200-600ppm Hardness

The Delta Onega can soften up to 2000 litres per hour of water. Regenerating automatically as required, the Onega regenerates in just 24 minutes, using 40 litres of water and 0.9kgs of salt. The softener sits inside the brine tank.


Page 3 - Section 10


Catalogue 2017


10




MODELS:

APPLICATIONS:

DIMENSIONS:

DELTA ONEGA DUPLEX WATER SOFTENER

STANDARD FEATURES: COMPACT EASY TO INSTALL EASY TO USE NO POWER REQUIRED AUTOMATIC DEMAND BASED REGENERATION CONTINUOUS UNINTERRUPTED SOFT WATER USES LESS WATER USES LESS SALT BYPASS VALVE 2 YEAR WARRANTY*

The Delta Onega Duplex also softens up to 2000 litres per hour of water. For high capacity and continuous soft water, a duty/standby configuration is recommended. Regenerating automatically as required, the Onega regenerates in just 24 minutes, using 40 litres of water and 0.9kgs of salt. Two softeners sit inside a single container with matching brine tank.

552mm (W) x 553mm (L) x 552mm (H)



ONEGA 2x9L 2 x 450ppm/m3 200-600ppm Hardness

The Delta Onega Duplex water softener provides high capacities and continuous soft water, in a compact format.


Section 10 - Page 4


Catalogue 2017


10




MODELS:

APPLICATIONS:

DELTA ONTARIO WATER SOFTENER

STANDARD FEATURES: COMPACT EASY TO INSTALL EASY TO USE NO POWER REQUIRED AUTOMATIC DEMAND BASED REGENERATION USES LESS WATER USES LESS SALT BYPASS VALVE 2 YEAR WARRANTY*

The Delta Ontario water softener provides the highest capacity option in the Delta range.



ONTARIO 12L 600ppm/m3 200-600ppm Hardness

The Delta Ontario is the largest softener in the Delta range. It can soften up to 2000 litres per hour of water. Regenerating automatically as required, the Ontario uses only 100 litres of water and 1.2kgs of salt. The softener sits inside the brine tank for a compact tidy finish.


Page 5 - Section 10


Catalogue 2017


10




MODELS:

APPLICATIONS:

DELTA ONTARIO DUPLEX WATER SOFTENER

Larger capacity 12 Litre water Softener. The Duplex version has separate brine tank.

STANDARD FEATURES: EASY TO INSTALL EASY TO USE NO POWER REQUIRED AUTOMATIC DEMAND BASED REGENERATION CONTINUOUS UNINTERRUPTED SOFT WATER USES LESS WATER USES LESS SALT BYPASS VALVE 2 YEAR WARRANTY*

The Delta Ontario can soften up to 2,000 litres per hour of water. Regenerating automatically as required, using 100 litres of water and 2.4kgs of salt. For larger flow rates and capacities, simply connect more units in parallel. Max pressure 8 bar.

Domestic, production plants, sports facilities, reverse osmosis pre-treatment, package boilers and cooling tower feed.


ONTARIO 1x12L 600ppm/m3 200-600 ppm Hardness

ONTARIO 2 1200ppm/m³


Section 10 - Page 6


Catalogue 2017


10




DELTA MULTIPLE WATER SOFTENERS

For all the advantages of the Delta softeners with larger capacities, Delta assemble multiple dual water softeners in parallel.

Further information on request.


Page 7 - Section 10


Catalogue 2017


10




MODELS:

AUTOTROL WATER SOFTENERS

Model Service Flow

Backwash Flow

Capacity (grains) Connections Size—DxH

(mm)

AWS735-268-762 7lpm 5lpm 10,500 1” BSP 152 x 890

AWS844-268-762 17lpm 6lpm 22,000 1” BSP 200 x 1120

AWS1054-268-762 30lpm 9lpm 44,000 1” BSP 250 x 1380

AWS1252-268-762 45lpm 13lpm 66,000 1” BSP 300 x 1320

AWS1465-268-762 70lpm 18lpm 88,000 1” BSP 350 x 1650

For the removal of Hardness from water in industrial, rural and domestic applications.

STANDARD FEATURES: FULLY AUTOMATIC QUALITY COMPONENTS THROUGHOUT AUTOTROL 268 HIGH CAPACITY VALVE 762 SERIES DEMAND BASED

REGENERATION AUTOTROL TURBULATOR ASSEMBLY

STANDARD 12 MONTH WARRANTY*

Larger units available on request. Please contact us with details of your application, and we will size a unit for you.


Section 10 - Page 8


Catalogue 2017


10




MODELS:

AUTOTROL MAGNUM WATER SOFTENERS

The Autotrol Magnum Valve is a commercial 2” ported valve for larger applications.

STANDARD FEATURES: VALVE MANUFACTURED IN NORYL OPERATING PRESSURE 20-125PSI FOR 4” TANK OPENING 12 MONTH WARRANTY*

Model Tank Size (mm) Service Flow

Backwash Flow

Capacity (grains) Connections

AWS1665-298-762 400 dia x 1,650 98 LPM 24 LPM 123,620 2” BSP




Larger softeners may require additional external valves - further information on request


Page 9 - Section 10


Catalogue 2017


10




MODELS:

AUTOTROL DUPLEX WATER SOFTENERS

For high capacity applications, and where continuous uninterrupted soft water is required, a duplex softener is recommended.

STANDARD FEATURES: TWIN ALTERNATING SYSTEMS FULLY AUTOMATIC QUALITY COMPONENTS THROUGHOUT AUTOTROL HIGH CAPACITY VALVES 764 SERIES DEMAND BASED REGENERATION 12 MONTH WARRANTY*


Larger units available on request. Please contact us with details of your application, and we will size a unit for you.

Model Tank Size (mm)

Service Flow

Backwash Flow

Capacity (grains) Connections

AWS-844-278-764 200 dia x 1,120 17.5 LPM 6 LPM 22,075 x 2 1” BSP

AWS-1054-278-764 250 dia x 1,370 31.6 LPM 9 LPM 39,735 x 2 1” BSP

AWS-1252-278-764 300 dia x 1,320 45 LPM 13 LPM 57.395 x 2 1” BSP

AWS-1465-278-764 350 dia x 1,650 70 LPM 18 LPM 88,300 x 2 1” BSP

Section 10 - Page 10


Catalogue 2017

Section 11reverSe oSMoSiS

11

CATALOGUE—2017

2017


INDEX

SECTION 11—REVERSE OSMOSIS

PRF RO REVERSE OSMOSIS UNIT PAGE 1

KRO REVERSE OSMOSIS MACHINES PAGE 2

LDOSIN REVERSE OSMOSIS CONTROLLERS PAGE 3



Catalogue 2017


11

CATALOGUE SECTION 11 — REVERSE OSMOSIS



APPLICATIONS:

MODELS:

GE WATER REVERSE OSMOSIS

PRF RO Reverse Osmosis Unit

The PRF RO offers a viable alternative to traditional RO for small scale applications. Driven by water pressure, the PRF RO utilises new high output low pressure membranes, eliminating the need for pumps. Compact, designed for domestic undersink use, these versatile units have found their way into many small industrial applications as well.

STANDARD FEATURES: COMPACT LOW COST PUMP FREE EASY TO MAINTAIN BUILT IN PRE-FILTRATION UP TO 2500 LITRES PER DAY BUILT IN WATER SHUT OFF VALVE

Model Code Description

PRF RO Reverse Osmosis System

MER3027637 PRF RO Membrane

MER1244746 PRF Activated Carbon Pre-Filter

MER1266690 PRF Sediment Cartridge

Domestic potable water, coffee makers, water coolers, humidifiers, aquariums, first stage treatment for laboratories. Suitable for use on potable water only.


Page 1 - Section 11


Catalogue 2017


11




MODELS:

KRO REVERSE OSMOSIS MACHINES

STANDARD FEATURES: POWDER COATED SS FRAME PERMEATE FLOW METER CONCENTRATE FLOW METER RECYCLE FLOW METER INLET PRESSURE GAUGE OPERATING PRESSURE GAUGE CONCENTRATE PRESSURE GAUGE 2 STAGE PRE-FILTERS MICROPROCESSOR CONTROL TEMPERATURE MONITOR CONDUCTIVITY MONITOR AUTO FLUSH SYSTEM MANUAL FLUSH PUSH BUTTON

Model Nominal Permeate

Flow Recovery

Rate Typical Ion Rejection

No. of Elements

Membrane Size

Power Consumption

KRO 1500 180 LPH 50-75% 95-98% 1 4.0” x 40” 1.5kW 1 phase

KRO 3000 360 LPH 50-75% 95-98% 2 4.0” x 40” 1.5kW 1 phase

KRO 6000 725 LPH 50-75% 95-98% 4 4.0” x 40” 2.2kW 3 phase

KRO 9000 1090 LPH 50-75% 95-98% 6 4.0” x 40” 3kW 3 phase

KRO 12000 1450 LPH 50-75% 95-98% 8 4.0” x 40” 4kW 3 phase

KRO 15000 1815 LPH 50-75% 95-98% 10 4.0” x 40” 4kW 3 phase

KRO 18000 2180 LPH 50-75% 95-98% 12 4.0” x 40” 5kW 3 phase


Section 11 - Page 2


Catalogue 2017


11




EMEC REVERSE OSMOSIS CONTROLLERS

LDOSIN Reverse Osmosis Controller

Inlet and outlet conductivity display, RO pump output, dosing pump output, inlet solenoid control, outlet solenoid control, flushing solenoid control, level control for storage tank, inlet and outlet pressure monitoring, standby input.

Also available in a panel mount version to suit OEM assemblies.

STANDARD FEATURES: MICROPROCESSOR BASED RO SYSTEM

CONTROLLER IP56 WALL MOUNTING CONFIGURATION DUAL CONDUCTIVITY DISPLAY 2 YEAR WARRANTY*


Page 3 - Section 11


Catalogue 2017

Section 12deMineraliSerS

12

CATALOGUE—2017

2017


INDEX

SECTION 12—DEMINERALISERS

MINI-DEMINERALISER PAGE 1

DEMINERALISER BOTTLES PAGE 2

REGENERATING DEMINERALISERS, 3.7 LPM — 22 LPM PAGE 3



Catalogue 2017


12

CATALOGUE SECTION 12 — DEMINERALISATION



OPTIONS:

APPLICATIONS:

SPECIFICATIONS:

MINI-DEMINERALISER Our customers kept asking us for a simple low cost method for producing small quantities of high purity water. This is what we came up with.

ZYIA Flowmeter with integral flow control valve. See the flow section of this catalogue.

HM DIGITAL in line water quality meter. See the testing section of this catalogue.

Laboratory use, for pharmaceutical ingredients and reagents, battery filling, cosmetic manufacturing, streak free cleaning. Can be used as a water polisher after other treatment steps.

Designed for the lowest possible on-going running costs, the housing can be simply refilled with loose mixed bed resin as required.

STANDARD FEATURES: HIGH QUALITY THREE PIECE AQUA

HOUSING INTERNAL DIFFUSER PLATE RISER TUBE WITH OUTLET SCREEN FILLED WITH MIXED BED

DEMINERALISATION RESIN

Recommended Flow Rate Up to 2lpm

Pressure Rating 800 Kpa

Volume Holds 1 Litre of Mixed Bed Resin

Capacity Purifies 150 Litres of Town Supply Water (typical)

Connections 1/4” Tube Connections


Page 1 - Section 12


Catalogue 2017


12




APPLICATIONS:

SPECIFICATIONS:

Model Size (mm) Volume (l)

PW716 178 ø x 400 h (7”ø x 16”high) 7.5

PW844 200 ø x 1120 h (8”ø x 44”high) 25

For larger volumes, and a popular option for post reverse osmosis water polishing, we also supply mixed bed resin in convenient refillable fibreglass pressure vessels.

Laboratory use - for pharmaceutical ingredients and reagents, cosmetic manufacturing, battery filling, streak free cleaning. Popular as a polisher after other treatment equipment.

You can refill the bottles yourself with mixed bed resin, or we offer an exchange service on request. For media & media specifications, see the media section of this catalogue.

DEMINERALISER BOTTLES


Section 12 - Page 2


Catalogue 2017


12




MODELS:

For the production of high purity water for industrial and commercial applications.

REGENERATING DEMINERALISERS

STANDARD FEATURES: AUTOMATIC AUTOTROL CONTROL HEADS

FOR PROCESS CONTROL CATION & ANION EXCHANGE RESIN

BOTTLES HIGH QUALITY DEMINERALISING RESIN AUTOMATIC OR SEMI-AUTOMATIC

REGENERATION USING HYDROCHLORIC ACID & CAUSTIC SODA


Model Flowrate (max)

ADI735 3.7LPM

ADI844 5.7LPM

ADI1054 11LPM

ADI1252 15LPM

ADI1465 22LPM

Page 3 - Section 12

13


Catalogue 2017

Section 13ultraviolet diSinfectionCATALOGUE—2017

2017


INDEX

GREENWAY VALIDATED ULTRAVIOLET DISINFECTION, 0-60L/MIN PAGE 1

UVGUARD S SERIES COMMERCIAL UV DISINFECTION, 0-550L/MIN PAGE 2

UVGUARD X SERIES INDUSTRIAL UV DISINFECTION, 0-318M3/HR PAGE 3

UVGUARD P SERIES INDUSTRIAL UV DISINFECTION, SALT WATER & CORROSIVE LIQUIDS PAGE 4

UVGUARD T SERIES INDUSTRIAL UV DISINFECTION, TANK AIR SPACE PAGE 5

SECTION 13—ULTRAVIOLET DISINFECTION


Section 13ultraviolet diSinfection


Catalogue 2017

13 CATALOGUE SECTION 13 — ULTRAVIOLET DISINFECTION



GREENWAY ULTRAVIOLET DISINFECTION

STANDARD FEATURES: NSF55 CLASS A CERTIFIED SATISFIES NZ DRINKING WATER STANDARD

REQUIREMENTS UV INTENSITY MONITOR LAMP ALARM & COUNTDOWN TIMER PROGRAMMABLE ALARMS COMPACT DESIGN 12 MONTH WARRANTY*

MODEL RATED FLOW (LPM)

LAMP (W)

CHAMBER DIMENSIONS

GAUV-20HMA 40.2 60 8.9 cm x 70.8 cm

GAUV-32HMA 61.3 90 8.9 cm x 100.3 cm

The O.W.L. Optical Water Log UV Monitor system is used with the Greenway® Advance UV systems with sensor port. The O.W.L. UV Monitor system includes a calibrated 254nm UV detection probe, OWL touch screen controller, USB with computer interface programs and computer interface cable. The OWL monitor system can monitor UV intensity levels inside the UV disinfection chamber and display the UV intensity or actual UV dose. It can also log all UV data as well as any fault conditions to give added confidence that the water is safe for consumption. The complete UV installation including the O.W.L monitor meets NSF55 Class A certification.


UV disinfection destroys pathogens in water without chemicals. Ultraviolet light inactivates Bacteria, Virus, Giardia and Cryptosporidium, making it an ideal point of use technology for ensuring safe drinking water.

Page 1 - Section 13

13


Catalogue 2017

Section 13ultraviolet diSinfectionCATALOGUE SECTION 13 — ULTRAVIOLET DISINFECTION



UVGUARD S-SERIES COMMERCIAL ULTRAVIOLET DISINFECTION

STANDARD FEATURES: HIGH GRADE 316 STAINLESS STEEL REACTOR BSP THREADED CONNECTIONS VIEWING PORT WATERMARK CERTIFIED NUMEROUS INLET/OUTLET LOCATIONS CUSTOMISED TO SUIT EACH APPLICATION

Model Capacity (LPM) Connections

(BSP) Power (watts)

Dimensions (LxW cm) 40mJ/cm2 30mJ/cm2

UVG S20 17 23 3/4” 20 32x6.2

UVG S30 25 34 3/4” (1”) 30 59x6.2

UVG S40-62 35 46 1” 40 97x6.2

UVG S40-76 45 60 1” 40 97x7.6

UVG S75 90 120 1”, 11/2” 80 97x7.6

UVG S80 86 115 1”, 11/2” 80 97x7.6

UVG S80-100 118 157 2” 80 97x10

UVG S125 137 183 2’ 125 97x7.6

UVG S172 186 248 2’ 172 97x7.6

UVG S125-100 188 250 2’ 125 97x10

UVG S160 203 270 2’ 160 128x7.6

UVG S245 263 351 2’ 245 128x7.6

UVG S160-100 271 361 2” BSP, 3” Flanged 160 128x10

UVG S245-100 358 478 2” BSP, 3” Flanged 245 128x10

UVG S440 553 737 3” Flanged 440 154x10

OPTIONS: Basic indoor controller, digital indoor controller, weatherproof PLC controller, customised PLC options, UV intensity monitoring, thermal relief valve, remote control options. APPLICATIONS: Wastewater, process water, aquaculture, swimming pools, water fountains, irrigation water, hot water, food and beverage, medical, pharmaceutical.

Section 13 - Page 2



Catalogue 2017




UVGUARD X-SERIES INDUSTRIAL ULTRAVIOLET DISINFECTION

STANDARD FEATURES:

HIGH GRADE 316 STAINLESS STEEL REACTOR SPACE SAVING DESIGNS 10 BAR RATED LONG LIFE (16,000HR) LAMPS WATERMARK CERTIFIED NUMEROUS INLET/OUTLET LOCATIONS CUSTOMISED TO SUIT EACH APPLICATION AVAILABLE UPTO 500M3 +

Model No. of Lamps

Capacity M3/hr (40mJ/cm2)

Flange Size

Power (watts)

Length mm)

X1-160 1 22 3” 185 1,220

X2-160 2 37 3” 370 1,220

X3-160 3 54 4” 555 1,220

X4-160 4 71 4” 740 1,220

X1-245 1 28 3” 240 1,220

X2-245 2 48 3” 480 1,220

X3-245 3 71 4” 720 1,220

X4-245 4 93 4” 960 1,220

X1-440 1 48 4” 450 1,420

X2-440 2 72 4” 900 1,420

X3-440 3 110 4” 1,350 1,420

X4-440 4 172 6” 1,800 1,420

X5-440 5 274 8” 2,250 1,420

X6-440 6 318 8” 2,700 1,420

OPTIONS: Customisable inlet/outlet configurations, UV intensity monitoring, automatic quartz wiping systems, reactor temperature management, customisable PLC control, skid mounting options. APPLICATIONS: Wastewater, process water, ultrapure water, hot water, sugar syrups, dam water, stormwater.

Page 3 - Section 13

13


Catalogue 2017

Section 13ultraviolet diSinfectionCATALOGUE SECTION 13 — ULTRAVIOLET DISINFECTION



UVGUARD P-SERIES INDUSTRIAL ULTRAVIOLET DISINFECTION

STANDARD FEATURES:

FOR SALT WATER & CORROSIVE LIQUIDS HIGH DENSITY POLYETHYLENE REACTOR 5 BAR RATED VIEWING PORT CUSTOMISED TO SUIT EACH

APPLICATION AVAILABLE UPTO 1,100M3 /HR

Model No. of Lamps

Capacity M3/hr (40mJ/cm2) Connections Power

(watts) Length (mm)

P80 1 8 2” Union 80 970

P125 1 13 2” Union 127 970

P172 1 14 2” Union 172 970

P160 1 21 2” Union 185 1,220

P245 1 26 2” Union 240 1,220

P1-440 1 77 3” Flange 450 1,420

P2-440 2 573 4” Flange 900 1,420

P3-440 3 869 4” Flange 1350 1,420

P4-440 4 1,153 6” Flange 1800 1,420

OPTIONS: Indoor or outdoor controllers, UV intensity monitoring, reactor temperature management, customisable PLC control. APPLICATIONS: Fish farming, hatcheries, aquariums, zoos, fountains, water features, thermal springs, brackish water, corrosive fluids.

Section 13 - Page 4



Catalogue 2017




UVGUARD T-SERIES INDUSTRIAL ULTRAVIOLET DISINFECTION

STANDARD FEATURES:

TANK AIR SPACE DISINFECTION HIGH GRADE 316SS FLANGED CONNECTION EASY INSTALLATION, HORIZONTAL OR

VERTICAL

Model Connections Lamp Power (watts)

UVG T20 2” Flange 20




OPTIONS: Indoor or outdoor controllers. APPLICATIONS: Prolong the life of stored liquids, including water, sugar syrups etc, Prevent bacterial infection from head spaces in high purity ring main buffer tanks. Prevent insects and pests from infesting water storage tanks.

Page 5 - Section 13


Catalogue 2017

Section 14ChemiCal mixerS

14

CATALOGUE—2017

2017


INDEX

SECTION 14—CHEMICAL MIXERS

MECHANICAL MIXERS PAGE 1

MANUAL MIXERS PAGE 2

STATIC MIXERS PAGE 3



Catalogue 2017

Section 14cheMical MixerS

14

CATALOGUE SECTION 14 — CHEMICAL MIXERS

SECTION 14


PAGE 1 2017

MODELS AVAILABLE:

EMEC MIXERS

MODEL RATED POWER

ROTATIONAL SPEED

SHAFT LENGTH

PROPELLER DIAMETER

USE FOR TANKS

MIXN8 0.09 kW 65 or 200 RPM 630 or 730mm 150mm Up to 250L

MIXVN8 0.09 kW 1400 RPM 630 or 730mm 70mm Up to 250L

MIXN4 0.18 kW 65, 200 or 400 RPM 730, 980 or1100mm 150mm Up to 1000L

MIXVN4 0.18 kW 1400 RPM 730 & 980mm 90mm Up to 500L

MIXN2 0.37 kW 65, 200 or 400 RPM 1100mm 150mm Up to 1000L

MIXVN2 0.37 kW 1400 RPM 730, 980 &1100mm 90mm Up to 1000L

IP55 flanged mixers, top mounting, designed for tanks from 100 to 1000 litres. All models available in three phase or single phase. Stainless steel shaft with PVC coating, fluorocarbon rotary seal fitted to the flange

to protect motor from chemical vapours.

MIXN


MIXVN

Page 1 - Section 14


Catalogue 2017

Section 14ChemiCal mixerS

14


SECTION 14


PAGE 2 2017

CHEMICAL TANK MIXER

MODELS AVAILABLE:

MODEL DESCRIPTION

MIX MAN PVC mixer 130mm diameter impeller 450, 650, 770mm or 1100 Shaft

MIX WITH PISTON

PVC piston type mixer 450mm Shaft

EMEC MANUAL MIXER

Manual mixer for chemical tanks, to keep chemical solutions in suspension.


Section 14 - Page 2


Catalogue 2017

Section 14cheMical MixerS

14


SECTION 14


PAGE 3 2017

MODELS AVAILABLE:

IN LINE CHEMICAL MIXER

MODEL DESCRIPTION

MIX STATICO 1 1/4” 1 1/4” PVC mixer, Polypropylene mixing elements, serviceable, 1/2” Injection valve.

MIX STATICO 1 1/2” 1 1/2” PVC mixer, Polypropylene mixing elements, serviceable, 1/2” Injection valve.

MIX STATICO 2” 2” PVC mixer, Polypropylene mixing elements, serviceable, 1/2” Injection valve.

MIX STATICO D40 1 1/4” PVC mixer, Polypropylene mixing elements, /2” Injection valve.

EMEC STATIC MIXER


Page 3 - Section 14


Catalogue 2017

Section 15filtration

15

CATALOGUE—2017

2017


INDEX

STAINLESS STEEL CLUSTER FILTER HOUSINGS PAGE 1

PVC CLUSTER FILTERS PAGE 2

AUTOMATIC BACKWASH MULTIMEDIA FILTERS PAGE 3

AUTOMATIC BACKWASH ACTIVATED CARBON FILTERS PAGE 4

AQUA AP PRO AUTOMATIC FILTRATION PAGE 5

AQUA AP EASY FILTRATION PAGE 6

AQUA CARTRIDGE FILTER HOUSINGS PAGE 7

OTHER CARTRIDGE FILTER HOUSINGS PAGE 8

SPUN FIBRE FILTER CARTRIDGES PAGE 9

PLEATED FILTER CARTRIDGES PAGE 10

ACTIVATED CARBON CARTRIDGES PAGE 11

AQUA WASHABLE NET FILTERS PAGE 11

SPECIALIST FILTER CARTRIDGES PAGE 12

SECTION 15—FILTRATION



Catalogue 2017


15

CATALOGUE SECTION 15 — FILTRATION

SECTION 15


PAGE 1 2017

MODELS:

STAINLESS STEEL CLUSTER FILTERS

For the removal of particulate matter from water.

STANDARD FEATURES: 304 STAINLESS STEEL (316 ON REQUEST) 7 CARTRIDGES PER HOUSING FITS STANDARD OPEN END CARTRIDGES TEMPERATURE RANGE 4-140°C 4 BAR DRAIN FITTING VENT OR GAUGE PORT

Model Height Fits Cartridges Flow Rate Connections

WH304SSCF10-7 540mm 10” 105LPM 1-1/2”NPT

WH304SSCF20-7 780mm 20” 210LPM 1-1/2” NPT

WH304SSCF30-7 1060mm 30” 315LPM 2” NPT

WH304SSCF40-7 1340mm 40” 420LPM 2” NPT


Bag Filters available on request

Page 1 - Section 15


Catalogue 2017


15


SECTION 15


PAGE 2 2017

MODELS:

PVC CLUSTER FILTERS


STANDARD FEATURES: UPVC 5 CARTRIDGES PER HOUSING FITS STANDARD OPEN END CARTRIDGES TEMPERATURE RANGE 4-38°C 5 BAR VENT OR GAUGE PORT

Model Height Fits Cartridges

Flow Rate Connections

WHPVCCF10-5 480mm 10” 75LPM 1-1/2” Socket

WHPVCCF20-5 730mm 20” 150LPM 1-1/2” Socket

WHPVCCF30-5 980mm 30” 225LPM 2” Socket

WHPVCCF40-5 1230mm 40” 300LPM 2” Socket


Section 15 - Page 2


Catalogue 2017


15


SECTION 15


PAGE 3 2017

MODELS:

AUTOMATIC BACKWASH MULTIMEDIA FILTERS


STANDARD FEATURES: AUTOMATIC BACKWASH TIMER AUTOTROL 263 HIGH CAPACITY VALVE QUALITY COMPONENTS THROUGHOUT 12 MONTH WARRANTY*

Model Size (mm) Service Flow (Max)

Backwash Flow (Min) Connections

AMMF844-263-742 200 dia x 1120 high 1135 LPH 1070 LPH 1” BSP




Larger sizes on request. OPTIONS:

Page 3 - Section 15


Catalogue 2017


15


SECTION 15


PAGE 4 2017

MODELS:

AUTOMATIC BACKWASH ACTIVATED CARBON FILTERS

For the removal of Chlorine, taste & odours from water.

STANDARD FEATURES: AUTOMATIC BACKWASH TIMER AUTOTROL 263 HIGH CAPACITY VALVE QUALITY COMPONENTS THROUGHOUT 12 MONTH WARRANTY*

Model Size (mm) Service Flow (Max)

Backwash Flow (Min) Connections

ACF735-263-742 150 dia x 890 high 4 LPM 5 LPM 1” BSP






Larger sizes on request. OPTIONS:

Section 15 - Page 4


Catalogue 2017


15


SECTION 15


PAGE 5 2017

MODELS:

AP PRO AUTOMATIC FILTRATION BY AQUA

Innovative Automatic Filtration from Italy. The AP PRO filter is designed to remove suspended particles, sand and metal particles from water.

HOW IT WORKS:

Dirt and particulate matter collects on the inside of the 89 micron filter screen. To clean the filter simply rotate the knob counter clockwise until fully open, and then clockwise to close it again. This operates the drain valve. Simultaneously an innovative nozzle is rotated around the inside of the screen. This reverses the flow though a small area of the filter, literally vacuuming it clean. There is no need for disassembly and there is no interruption to water flow while cleaning is in progress.

Code Model Connections Nominal Flow Rate m3/hr

MAX Flow Rate m3/hr Dimensions

A8000030 AP PRO 1/2” BSP 3 4.6 165x344

A8000020 AP PRO 3/4” BSP 3.5 5.1 174x344

A8000010 AP PRO 1” BSP 4 5.9 190x398

A8000040 AP PRO PLUS 1-1/4” BSP 5 7.4 198x398

A8000050 AP PRO PLUS 1-1/2” BSP 6 8.9 257x398


Page 5 - Section 15


Catalogue 2017


15


SECTION 15


PAGE 6 2017

MODELS:

AP EASY FILTRATION BY AQUA

Particles collect on the outside of the filter where they can be seen through the transparent housing. Cartridge can be flushed as required by operating the drain valve.

STANDARD FEATURES: AIR BLEED VALVE BRASS INSERTS POLYPROPYLENE HEAD 3-PIECE CONSTRUCTION FOR EASY

DISASSEMBLY TRANSPARENT SAN HOUSING RE-USABLE 80 MICRON MESH FILTER

CARTRIDGE WORKING PRESSURE 8 BAR BURST PRESSURE 35 BAR OPERATING TEMPERATURE 0-50

DEGREES C

Part No. Model Connections Nominal Flow Rate m3/hr

MAX Flow Rate m3/hr Dimensions

A8000510 AP EASY 3/4” BSP 3.8 4.7 122 x 388


Section 15 - Page 6


Catalogue 2017


15


SECTION 15


PAGE 7 2017

10” 3-PIECE SLIMLINE FILTER HOUSING

5” 3-PIECE SLIMLINE FILTER HOUSING

CARTRIDGE FILTER HOUSINGS

Part No A2020090

Description Quality 3-Piece Filter Housing

Size For 1 5” x 2.5” Slimline Cartridge

Connections 1/2” BSP

Specifications 0-50°C, 800 Kpa

Part No A2020150

Description Quality 3-Piece Filter Housing

Size For 1 10” x 2.5” Slimline Cartridge

Connections 3/4” BSP

Specifications 0-50°C, 800 kPa


Page 7 - Section 15


Catalogue 2017


15


SECTION 15


PAGE 8 2017

20” BIG WHITE FILTER HOUSING

10” BIG WHITE FILTER HOUSING

20” FILTER HOUSING

10” BUDGET FILTER HOUSING

CARTRIDGE FILTER HOUSINGS

Part No Description

10DOH3/4 10” Filter Housing Opaque

10DOHC3/4 10” Filter Housing Clear

Specifications For 1 10” x 2.5” Slimline Cartridge, 3/4” BSP connections, 0-45°C, 600 kPa

Integral bleed valve, wall bracket and spanner included.

Part No Description

20BWH COM 20” Big White Filter Housing

Specifications For 1 20” x 4” Jumbo Cartridge,1” BSP connections, 0-45°C, 600 Kpa

Integral bleed valve, wall bracket and spanner included. Also available with 1½ connections.

Part No Description

10BWH 10” Big White Filter Housing Only

10BWH COM 10” Big White Filter Housing Complete - Integral bleed valve, wall bracket and spanner included.

Specifications For 1 10” x 4” Jumbo Cartridge, 1” BSP connections, 0-45°C, 600 Kpa

Also available with 1½ connections.

Part No Description

20AH3/4 20” Filter Housing

Specifications For 1 20” x 2.5” Cartridge, 3/4” BSP connections, 0-45°C, 600 KPa

Integral bleed valve, wall bracket and spanner included.


Section 15 - Page 8


Catalogue 2017


15


SECTION 15


PAGE 9 2017

POLYPROPYLENE SPUN FIBRE FILTER CARTRIDGES Part No Description 2100250N 10” x 2.5” 50 Micron (Nominal) filter cartridge

2100220N 10” x 2.5” 20 Micron (Nominal) filter cartridge












2100450N 10” x 4” 50 Micron (Nominal) filter cartridge








FILTER CARTRIDGES


OPTIONS: Dual gradient cartridges, Absolute rated cartridges, alternative end connections

Page 9 - Section 15


Catalogue 2017


15


SECTION 15


PAGE 10 2017

POLYPROPYLENE PLEATED FILTER CARTRIDGES

FILTER CARTRIDGES

Part No Description 3100250N 10” x 2.5” 50 Micron (Nominal) filter cartridge




3100201A 10” x 2.5” 1 Micron (Absolute) filter cartridge










3100401A 10” x 4” 1 Micron (Absolute) filter cartridge





3200401A 20” x 4” 1 Micron (Absolute) filter cartridge




Catalogue 2017


15


SECTION 15


PAGE 11 2017

Other sizes on request.

AQUA WASHABLE NET CARTRIDGES

ACTIVATED CARBON CARTRIDGES

FILTER CARTRIDGES

Part No Description

6050201N 5” x 2.5” 0.5 Micron (Nominal) carbon cartridge

6100205N 10” x 2.5” 5 Micron (Nominal) carbon cartridge


6200205N 20” x 2.5” 5 Micron (Nominal) carbon cartridge


6100405N 10” x 4” 5 Micron (Nominal) carbon cartridge

6200405N 20” x 4” 5 Micron (Nominal) carbon cartridge

Aqua washable cartridges can be washed and re-used over and over again. The washable net cartridge is ideal for removing suspended solids, sand, slime and rust particles. Easy to clean and non-shredding.

Part No Micron Length Flow (l/hr)

A4030100 80 5” 1750

A4030010 250 5” 2250

A4030030 80 10” 3500

A4030120 250 10” 4500


Page 11 - Section 15


Catalogue 2017


15


SECTION 15


PAGE 12 2017

SPECIALIST FILTER CARTRIDGES

Part No Description

RFFE20-BB 20” x 4” Pentek iron removal cartridge 20lpm, <3ppm

AAL 10” x 2.5” Fluoride removal filter

NRC 10” x 2.5” Nitrate removal filter




Catalogue 2017

Section 16valveS

16

CATALOGUE—2017

2017


INDEX

SANKING COMPACT PVC BALL VALVES PAGE 1

SANKING DOUBLE UNION BALL VALVES PAGE 2

SANKING SINGLE UNION NON-RETURN VALVES PAGE 3

SANKING DOUBLE UNION NON-RETURN VALVES PAGE 4

SANKING FOOT VALVES PAGE 5

SANKING SWING CHECK VALVES PAGE 6

SANKING BUTTERFLY VALVES PAGE 7

SANKING DIAPHRAGM VALVES PAGE 8

KLD20 MINI MOTORISED VALVES PAGE 9

KLD200 MOTORISED VALVES PAGE 10

KLD MOTORISED VALVES—LARGER SIZES ON REQUEST PAGE 11

SANKING PNEUMATIC BALL VALVES PAGE 12

SANKING PNEUMATIC BUTTERFLY VALVES PAGE 13

SANKING ELECTRIC BALL VALVES PAGE 14

SANKING ELECTRIC BUTTERFLY VALVES PAGE 15

KLD MODULATING CONTROL VALVES PAGE 16

SECTION 16—VALVES



Catalogue 2017

Sect

ion

4Section 16valveS

16

CATALOGUE SECTION 16 — VALVES

SECTION 16


PAGE 1 2017

OPTIONS:

SANKING COMPACT BALL VALVES

STANDARD FEATURES: PVC BODY EPDM SEALS REMOVABLE HANDLE BSP THREADS 0-55°C UV RESISTANT 0-10 BAR 12 MONTH WARRANTY*


Part No Description

S.KVN UPVC 15 EP BSP DN15 Compact ball valve, UPVC, EPDM, BSP Threads






Alternative colours, socket ends.

Page 1 - Section 16


Catalogue 2017

Section 16valveS

16


SECTION 16


PAGE 2 2017

SANKING DOUBLE UNION BALL VALVES

Part No Description

S.KVT UPVC 15 EP BSP DN15 Double union ball valve, UPVC, EPDM, BSP Threads



S.KVT UPVC 32 EP BSP DN32 Double union ball valve, UPVC ,EPDM, BSP Threads



S.KVT UPVC 1/2 EP SCH80 DN15 Double union ball valve, UPVC ,EPDM, Socket ends

S.KVT UPVC 3/4 EP SCH80 DN20 Double union ball valve, UPVC ,EPDM, Socket ends

S.KVT UPVC 1 EP SCH80 DN25 Double union ball valve, UPVC, EPDM, Socket ends

S.KVT UPVC 1-1/4 EP SCH80 DN32 Double union ball valve, UPVC, EPDM, Socket ends

S.KVT UPVC 1-1/2 EP SCH80 DN40 Double union ball valve, UPVC, EPDM, Socket ends

S.KVT UPVC 2 EP SCH80 DN50 Double union ball valve, UPVC ,EPDM, Socket ends

STANDARD FEATURES: ANSI SCHEDULE 80 OR BSP PVC BODY EPDM SEALS DOUBLE UNION CONNECTIONS SERVICEABLE VALVE REMOVABLE HANDLE UV RESISTANT 0-55°C 0-10 BAR 12 MONTH WARRANTY*

Valve in UPVC, CPVC, PPH, Clear PVC, PVDF. BSP threads, socket ends or alternative international connections. EPDM or Viton seals. Available up to DN100 on request.

OPTIONS:


Section 16 - Page 2


Catalogue 2017

Sect

ion

4Section 16valveS

16


SECTION 16


PAGE 3 2017

SANKING SINGLE UNION NON-RETURN VALVES

STANDARD FEATURES: ANSI SCHEDULE 80 OR BSP PVC BODY EPDM SEALS SINGLE UNION CONNECTION UV RESISTANT 0-55°C 0-10 BAR 12 MONTH WARRANTY*

Spring assisted on request. Valve in UPVC, CPVC, PPH. Alternative colours on request. BSP threads, socket ends or alternative international connections. EPDM or Viton seals.

OPTIONS:

Part No Description

S.KCVS100 UPVC 15 EP BSP DN15 Check valve, UPVC, EPDM, BSP Threads






S.KCVS100 UPVC 1/2 EP SCH80 DN15 Check valve, UPVC, EPDM, Socket ends

S.KCVS100 UPVC 3/4 EP SCH80 DN20 Check valve, UPVC, EPDM, Socket ends

S.KCVS100 UPVC 1 EP SCH80 DN25 Check valve, UPVC, EPDM, Socket ends

S.KCVS100 UPVC 1-1/4 EP SCH80 DN32 Check valve, UPVC, EPDM, Socket ends

S.KCVS100 UPVC 1-1/2 EP SCH80 DN40 Check valve, UPVC, EPDM, Socket ends

S.KCVS100 UPVC 2 EP SCH80 DN50 Check valve, UPVC, EPDM, Socket ends


Page 3 - Section 16


Catalogue 2017

Section 16valveS

16


SECTION 16


PAGE 4 2017

SANKING DOUBLE UNION NON-RETURN VALVES

STANDARD FEATURES: ANSI SCHEDULE 80 OR BSP PVC BODY EPDM SEALS DOUBLE UNION CONNECTIONS SERVICEABLE VALVE PATENTED SPRINGLESS DESIGN UV RESISTANT 0-55°C 0-10 BAR 12 MONTH WARRANTY*

Valve in UPVC, CPVC, PPH, Clear PVC. BSP threads, socket ends or alternative international connections. EPDM or Viton seals.

OPTIONS:

Part No Description

S.KCVB100 UPVC 15 EP BSP DN15 Double union check valve, UPVC, EPDM, BSP Threads






S.KCVB100 UPVC 1/2 EP SCH80 DN15 Double union check valve, UPVC, EPDM, Socket ends

S.KCVB100 UPVC 3/4 EP SCH80 DN20 Double union check valve, UPVC, EPDM, Socket ends

S.KCVB100 UPVC 1 EP SCH80 DN25 Double union check valve, UPVC, EPDM, Socket ends

S.KCVB100 UPVC 1-1/4 EP SCH80 DN32 Double union check valve, UPVC, EPDM, Socket ends

S.KCVB100 UPVC 1-1/2 EP SCH80 DN40 Double union check valve, UPVC, EPDM, Socket ends

S.KCVB100 UPVC 2 EP SCH80 DN50 Double union check valve, UPVC, EPDM, Socket ends


Section 16 - Page 4


Catalogue 2017

Sect

ion

4Section 16valveS

16


SECTION 16


PAGE 5 2017

SANKING FOOT VALVES

STANDARD FEATURES: BSP CONNECTION PVC BODY EPDM SEALS SERVICEABLE VALVE NO SPRING 0-55°C 0-10 BAR 12 MONTH WARRANTY*

Part No Description

S.KFVS100 UPVC 15 EP BSP DN15 Foot valve, BSP Thread






OPTIONS: Foot valve in UPVC, CPVC, PPH, PVDF. BSP thread, socket end or alternative international connections. EPDM or Viton seals. Foot valves up to DN200 on request.


Page 5 - Section 16


Catalogue 2017

Section 16valveS

16


SECTION 16


PAGE 6 2017

SANKING SWING CHECK VALVES

STANDARD FEATURES: ANSI SCHEDULE 80 OR BSP PVC BODY EPDM SEALS STAINLESS STEEL PIVOT HORIZONTAL OR VERTICAL INSTALLATION UV RESISTANT 0-55°C 0-10 BAR 12 MONTH WARRANTY*

Valve in UPVC, CPVC. BSP threads, socket ends or alternative international connections. Available in DN65-DN200 flanged. EPDM or Viton seals.

OPTIONS:

Part No Description

S.KCVC100 UPVC 65 EP BSP DN65 Swing check valve, UPVC, EPDM, BSP Threads

S.KCVB100 UPVC 80 EP BSP DN80 Swing check valve, UPVC, EPDM, BSP Threads




Section 16 - Page 6


Catalogue 2017

Sect

ion

4Section 16valveS

16


SECTION 16


PAGE 7 2017

SANKING BUTTERFLY VALVES

STANDARD FEATURES: PVC BODY EPDM SEALS FLANGE CONNECTION LOCKABLE HANDLE UV RESISTANT 0-55°C 0-10 BAR 12 MONTH WARRANTY*

Valve in UPVC, CPVC, PPH. EPDM or Viton seals.

OPTIONS:


S.KVBLW UPVC 8 EP DN200 Butterfly valve, UPVC, EPDM, with worm drive



Part No Description

S.KVBL UPVC 1-1/2 EP DN40 Butterfly valve, UPVC, EPDM

S.KVBL UPVC 2 EP DN50 Butterfly valve, UPVC, EPDM

S.KVBL UPVC 2-1/2 EP DN65 Butterfly valve, UPVC, EPDM






Page 7 - Section 16


Catalogue 2017

Section 16valveS

16


SECTION 16


PAGE 8 2017

SANKING DIAPHRAGM VALVES

STANDARD FEATURES: PVC BODY EPDM SEALS UNION CONNECTIONS POSITION INDICATOR UV RESISTANT 0-55°C 0-10 BAR 12 MONTH WARRANTY*

Valve in UPVC, CPVC, PPH, Clear PVC, PVDF. Available with or without unions, BSP, flanged or socket connections. Diaphragm in EPDM, Viton or PTFE. EPDM or Viton seals.

OPTIONS:

Part No Description

S.KDVT UPVC 1/2 EP SCH80 DN15 Diaphragm valve, UPVC, EPDM, Socket ends

S.KDVT UPVC 3/4 EP SCH80 DN20 Diaphragm valve, UPVC, EPDM, Socket ends

S.KDVT UPVC 1 EP SCH80 DN25 Diaphragm valve, UPVC, EPDM, Socket ends

S.KDVT UPVC 1-1/4 EP SCH80 DN32 Diaphragm valve, UPVC, EPDM, Socket ends







Section 16 - Page 8


Catalogue 2017

Sect

ion

4Section 16valveS

16


SECTION 16


PAGE 9 2017

KLD20 MINI MOTORISED VALVES

The KLD20 motorised valve offers a popular alternative to solenoid valves. Often retrofitted into difficult applications where solenoid valves are problematic, KLD ball valves have no diaphragms to rupture, no pilot tubes to block, no minimum pressure requirement and no restriction to flow. These valves also feature a manual over-ride and a visual indication of valve position.

STANDARD FEATURES: ULTRA COMPACT MINI ACTUATOR, 55x65x60mm RELIABLE OPERATION, 70,000+ CYCLES TYPICAL)** FAST OPERATION, 5-7 SECONDS LOW POWER CONSUMPTION, 5 WATTS VALVE POSITION INDICATOR WINDOW MANUAL OVERRIDE (OPTIONAL) IP54 12 MONTH WARRANTY*

** Based on manufacturers testing on cold water at 1mPa.


Part No Connections (BSP) Bore Diameter Valve Body Voltage

KLD20S KT2 DN15 PVC 24V 15/25mm 15mm PVC 24V AC/DC

KLD20S KT2 DN15 PVC 230VAC 15/25mm 15mm PVC 230V AC

KLD20S KT2 DN15 SS 24V 15mm 15mm 316 SS 24V AC/DC

KLD20S KT2 DN15 SS 230VAC 15mm 15mm 316 SS 230V AC





KLD20S BD3 DN15 PVC 24V 15/25mm 15mm PVC 24V AC/DC

KLD20S BD3 DN15 PVC 230VAC 15/25mm 15mm PVC 230V AC

KLD20S BD3 DN15 SS 24V 15mm 15mm 316 SS 24V AC/DC

KLD20S BD3 DN15 SS 230VAC 15mm 15mm 316 SS 230V AC





1. KT2=2 wire self closing. BD3=3 wire powered to open and close. 2. KLD20S DN15 PVC valves can be used as either a 15mm BSP valve or a 25mm BSP valve by the use/removal of an insert. 3. For alternative voltages, control types or valve materials please enquire. 4. Normally open (NO) available on request.

KLD20COVER—Weather cover for outdoor use.

Page 9 - Section 16


Catalogue 2017

Section 16valveS

16


SECTION 16


PAGE 10 2017

KLD200 MOTORISED VALVES

STANDARD FEATURES: COMPACT ACTUATOR, 70x84x102mm FAST OPERATION, 10 SECONDS LOW POWER CONSUMPTION, 36 WATTS VALVE POSITION INDICATOR WINDOW MANUAL OVERRIDE IP54 12 MONTH WARRANTY*


Part No Connections (BSP) Bore Diameter Valve Body Voltage

KLD200N BD3 DN25 PVC 24VAC 25mm 25mm PVC 24VAC




KLD200N BD3 DN32 304SS 24VAC 32mm 32mm 304SS 24VAC

KLD200N BD3 DN40 304SS 24VAC 40mm 40mm 304SS 24VAC

KLD200N BD3DN50 304SS 24VAC 50mm 50mm 304SS 24VAC

Other Voltages: 24VDC, 230VAC Other Control Types: B3S (with feedback switches) Other Valve Materials: Nickel plated brass

OPTIONS:



Catalogue 2017

Sect

ion

4Section 16valveS

16


SECTION 16


PAGE 11 2017

KLD MOTORISED VALVES LARGER SIZES — ON REQUEST



Catalogue 2017

Section 16valveS

16


SECTION 16


PAGE 12 2017

SANKING PNEUMATIC BALL VALVES

STANDARD FEATURES: COMPRESSED AIR OPERATED (45 –120 PSI) DOUBLE OR SINGLE ACTING ACTUATOR POSITION INDICATOR DOUBLE UNION BALL VALVE 10 BAR MEDIA WORKING PRESSURE 0-55°C (UPVC) EPDM SEALS

12 MONTH WARRANTY*

OPTIONS: Valve in UPVC, CPVC, PPH, PVDF. BSP threads, socket ends or alternative international connections. EPDM or Viton seals.


Part No Description

S.PA KVT 1/2 UPVC EP SCH80 DN15 Air operated double union ball valve, UPVC, Socket ends

S.PA KVT 3/4 UPVC EP SCH80 DN20 Air operated double union ball valve, UPVC, Socket ends

S.PA KVT 1 UPVC EP SCH80 DN25 Air operated double union ball valve, UPVC, Socket ends

S.PA KVT 1-1/4 UPVC EP SCH80 DN32 Air operated double union ball valve, UPVC, Socket ends








Catalogue 2017

Sect

ion

4Section 16valveS

16


SECTION 16


PAGE 13 2017

SANKING PNEUMATIC BUTTERFLY VALVES

STANDARD FEATURES: COMPRESSED AIR OPERATED (45–120 PSI) DOUBLE OR SINGLE ACTING ACTUATOR POSITION INDICATOR UV STABILISED UPVC VALVE 10 BAR MEDIA WORKING PRESSURE 0-55°C (UPVC) EPDM SEALS 12 MONTH WARRANTY*

OPTIONS:

Valve in UPVC, CPVC, PPH, PVDF. EPDM or Viton seals.


Part No Description

S. PA KBVL UPVC 1-1/2 EP DN40 Air operated butterfly valve, UPVC, EPDM

S. PA KBVL UPVC 2 EP DN50 Air operated butterfly valve, UPVC, EPDM

S. PA KBVL UPVC 2-1/2 EP DN65 Air operated butterfly valve, UPVC, EPDM










Catalogue 2017

Section 16valveS

16


SECTION 16


PAGE 14 2017

SANKING ELECTRIC BALL VALVES

STANDARD FEATURES: ELECTRIC MOTOR DRIVEN VALVE ADJUSTABLE LIMIT STOP 15 TO 90 DEGREES MANUAL OVER-RIDE POSITION INDICATOR DOUBLE UNION BALL VALVE 10 BAR MEDIA WORKING PRESSURE 0-55°C (UPVC) EPDM SEALS

12 MONTH WARRANTY*

Part No Description

S.EA KVT 1/2 UPVC EP SCH80 DN15 Motor operated double union ball valve UPVC, Socket ends

S.EA KVT 3/4 UPVC EP SCH80 DN20 Motor operated double union ball valve UPVC, Socket ends

S.EA KVT 1 UPVC EP SCH80 DN25 Motor operated double union ball valve UPVC, Socket ends

S.EA KVT 1-1/4 UPVC EP SCH80 DN32 Motor operated double union ball valve UPVC, Socket ends






OPTIONS: Valve in UPVC, CPVC, PPH, PVDF. BSP threads, socket ends or alternative international connections. EPDM or Viton seals. 24VAC, 24VDC or 230VAC.




Catalogue 2017

Sect

ion

4Section 16valveS

16


SECTION 16


PAGE 15 2017

SANKING ELECTRIC BUTTERFLY VALVES

Part No Description

S. EA KBVL UPVC 1-1/2 EP DN40 Motor operated butterfly valve, UPVC, EPDM

S. EA KBVL UPVC 2 EP DN50 Motor operated butterfly valve, UPVC, EPDM

S. EA KBVL UPVC 2-1/2 EP DN65 Motor operated butterfly valve, UPVC, EPDM








OPTIONS: Valve in UPVC, CPVC, PPH, PVDF. EPDM or Viton seals.

STANDARD FEATURES: ELECTRIC MOTOR DRIVEN VALVE ADJUSTABLE LIMIT STOP 15 TO 90 DEGREES MANUAL OVER-RIDE POSITION INDICATOR 10 BAR MEDIA WORKING PRESSURE 0-55°C (UPVC) EPDM SEALS

12 MONTH WARRANTY*




Catalogue 2017

Section 16valveS

16


SECTION 16


PAGE 16 2017

KLD MODULATING VALVES

STANDARD FEATURES: 4-20MA INPUT LCD DISPLAY OF VALVE POSITION ULTRA COMPACT MINI ACTUATOR, 55x67x60mm SPECIAL MOTOR, EXTRA LONGLIFE ROLLER

BEARINGS UP TO 500,000 CYCLES LOW POWER CONSUMPTION, 5 WATTS 4-20MA FEEDBACK SIGNAL FOR VALVE POSITION MANUAL OVERRIDE IP54 12 MONTH WARRANTY* LINEARISING FLOW ORIFICE OPTION AVAILABLE IN 24VDC OR 230VAC


Part No Nominal Diameter Bore Diameter Valve Body Voltage

KLD20T KV DN 8 SS 24VDC DN8 8mm 304SS 24V AC/DC

KLD20T KV DN 8 SS 230VAC DN8 8mm 304SS 230V AC

KLD20T KV DN10 SS 24VDC DN10 10mm 304SS 24V AC/DC

KLD20T KV DN10 SS 230VAC DN10 10mm 304SS 230V AC

KLD20T KV DN15 SS 24VDC DN15 15mm 316SS 24V AC/DC

KLD20T KV DN15 SS 230VAC DN15 15mm 316SS 230V AC

KLD20T KV DN20 SS 24VDC DN20 20mm 316SS 24VDC

KLD20T KV DN20 SS 230VAC DN20 20mm 316SS 230VAC

KLD20T KV DN25 SS 24VDC DN25 20mm 316SS 24VDC

KLD20T KV DN25 SS 230VAC DN25 20mm 316SS 230VAC

Electronic flow characteristics options. Standard or reverse actions. 4 x flow linearisation profiles.

OPTIONS:



Catalogue 2017

Section 17flow

17

CATALOGUE—2017

2017


INDEX

SECTION 17—FLOW

LZM SERIES PANEL MOUNTING IN-LINE ROTAMETERS, 0-170L/MIN PAGE 1

LZM-Z SERIES PANEL MOUNT ROTAMETERS, WITH FLOW CONTROL, 0-170L/MIN PAGE 2

LZM-SW SERIES PANEL MOUNT ROTAMETERS, WITH ALARM LIMIT SWITCH, 0-170L/MIN PAGE 3

LZM-G SERIES IN-LINE ROTAMETERS, 0-750L/MIN PAGE 4

LZS SERIES PLASTIC TUBE FLOW METERS, 0-120M3/HR PAGE 5

LZS SERIES PLASTIC TUBE FLOW METERS, WITH LIMIT SWITCHES PAGE 6

EMEC CATFI & CATCI PULSE OUTPUT WATER METERS PAGE 7

EMEC CATFIT & CATCIT PULSE OUTPUT WATER METERS WITH TEFLON COATING PAGE 8

EMEC CWFA & CWCA FLANGED PULSE OUTPUT WATER METERS PAGE 9

EMEC CWFAT FLANGED PULSE OUTPUT WATER METERS, WITH TEFLON COATING PAGE 10



Catalogue 2017

Section 17flow

17

SECTION 17


PAGE 1 2017

CATALOGUE SECTION 17 — FLOW

MODEL:

LZM SERIES PANEL MOUNTING IN-LINE ROTAMETERS

STANDARD FEATURES: CONSTRUCTED OF STAINLESS STEEL,

ACRYLIC & ABS DUAL SCALES IN LITRES & GALLONS

PER MINUTE MAXIMUM WORKING PRESSURE 10 BAR MAXIMUM TEMPERATURE 60°C BSP PIPE THREADS SUITABLE FOR WATER & COMPATIBLE

LIQUIDS WITH AN SG OF 1 12 MONTH WARRANTY*

Model Flow Rate Dimensions Connections

LZM-15-4 0.5 to 4 LPM 220 x 32 x 38mm (h x w x d) 1/2” BSPT male

LZM-15-8 0.8 to 8 LPM 220 x 32 x 38mm (h x w x d) 1/2” BSPT male

LZM-15-18 2 to 18 LPM 220 x 32 x 38mm (h x w x d) 1/2” BSPT male

LZM-15-28 2 to 28 LPM 220 x 32 x 38mm (h x w x d) 1/2” BSPT male

LZM-20-40 8 to 40 LPM 233 x 39 x 44mm (h x w x d) 3/4” BSP male



LZM-25-60 6 to 60 LPM 250 x 45 x 50mm (h x w x d) 1” BSPT male

LZM-25-170 20 to 170 LPM 250 x 45 x 50mm (h x w x d) 1” BSPT male

Smaller and larger sizes, alternative flow ranges and alternative materials, are available on request.

OPTIONS:


Page 1 - Section 17


Catalogue 2017

Section 17flow

17

SECTION 17


PAGE 2 2017


LZM-Z SERIES PANEL MOUNTING ROTAMETERS WITH FLOW CONTROL

STANDARD FEATURES: BUILT IN STAINLESS STEEL FLOW

CONTROL VALVE CONSTRUCTED OF STAINLESS STEEL,




MODEL: Model Flow Rate Dimensions Connections

LZM-15ZT-4 0.5 to 4 LPM 175 x 35 x 40mm ( h x w x d) 1/2” BSP

LZM-15ZT-7 0.7 to 7 LPM 175 x 35 x 40mm ( h x w x d) 1/2” BSP

LZM-15ZT-11 1 to 11 LPM 175 x 35 x 40mm ( h x w x d) 1/2” BSP

LZM15-ZT-18 2 to 18 LPM 175 x 35 x 40mm ( h x w x d) 1/2” BSP

LZM25-ZT-60 6 to 60 LPM 234 x 45 x 46mm (h x w x d) 1” BSP

LZM25-ZT-170 17 to 170 LPM 234 x 45 x 46mm (h x w x d) 1” BSP

OPTIONS:



Section 17 - Page 2


Catalogue 2017

Section 17flow

17

SECTION 17


PAGE 3 2017


LZM-SW SERIES PANEL MOUNTING ROTAMETERS WITH ALARM LIMIT SWITCH

STANDARD FEATURES: AVAILABLE WITH LOW AND/OR HIGH

FLOW LIMIT SWITCHES CONSTRUCTED OF STAINLESS STEEL,





MODEL: Model Flow rate Dimensions Connections

LZM-25-35-SW 5 to 35 LPM 250 x 45 x 50mm (h x w x d) 1” BSPT male






OPTIONS:


Page 3 - Section 17


Catalogue 2017

Section 17flow

17

SECTION 17


PAGE 4 2017


STANDARD FEATURES: CONSTRUCTED OF STAINLESS STEEL,

ACRYLIC & ABS DUAL SCALES IN LITRES & GALLONS PER

MINUTE MAXIMUM WORKING PRESSURE 10 BAR MAXIMUM TEMPERATURE 60°C BSP PIPE THREADS SUITABLE FOR WATER & COMPATIBLE


LZM-G SERIES IN-LINE ROTAMETERS


MODEL: Model Flow rate Dimensions Connections

LZM-10G-45 5-45 LPH 187mm x 22mm diameter 1/2” BSP male

LZM-10G-60 6-60 LPH 187mm x 22mm diameter 1/2” BSP male

LZM-15G-4 0.4 to 4 LPM 210mm x 32mm diameter 1/2” BSP female



LZM-20G-36 4 to 36 LPM 278mm x 44mm diameter 3/4” BSP female

LZM-25G-70 10 to 70 LPM 265mm x 51mm diameter 1” BSP female

LZM-40G-170 20 to 170 LPM 306mm x 51mm diameter 11/2” BSP male

LZM-40G-220 80 to 220 LPM 306mm x 51mm diameter 11/2” BSP male

LZM-50G-300 80 to 300 LPM 380mm x 75mm diameter 2” BSP female or male



OPTIONS:


Section 17 - Page 4


Catalogue 2017

Section 17flow

17

SECTION 17


PAGE 5 2017


LZS SERIES PLASTIC TUBE FLOW METERS

STANDARD FEATURES: TAPERED TUBE IS CHEMICAL RESISTANT

AS PLASTIC FLOAT IS ABS GUIDE IS 316SS (PTFE ON REQUEST) END CONNECTIONS ARE PVC (ABS ON

REQUEST) UNION CONNECTIONS FOR EASY

DISASSEMBLY / CLEANING ACCURACY ±4% TEMPERATURE RANGE 0-60°C PRESSURE (MAX) 6 BAR 12 MONTH WARRANTY*

D=short type with float guide. Also available in long version without guide. Available with flange connections. Body available in polysulphone, fittings available in PVC, floats available in SS for higher temperatures. Available up to DN150 and flowrates to 200m3/hr.

MODEL: Model Flow Rate Nominal Diameter Height Connections

LZS-15D-50 5-50LPH 15mm 202mm 1/2” BSP

LZS-15D-100 10-100LPH 15mm 202mm 1/2” BSP

LZS-15D-250 25-250LPH 15mm 202mm 1/2” BSP

LZS-15D-500 50-500LPH 15mm 202mm 1/2” BSP

LZS-15D-1000 100-1000LPH 15mm 202mm 1/2” BSP

LZS-25D-1000 4-40 LPM 25mm 226mm 3/4” BSP

LZS-25D-1600 160-1600 LPH 25mm 226mm 3/4” BSP

LZS-25D-2500 250-2500LPH 25mm 226mm 3/4” BSP

LZS-32D-6 0.6-6 m3/hr 32mm 288mm 1” BSP

LZS-50D-16 1.6-16 m3/hr 50mm 341mm 1 1/2” BSP

LZS-65D-40 4-40 m3/hr 65mm 430mm 2” BSP

LZS-65D-60 6-60 m3/hr 65mm 430mm 2” BSP

LZS-100D-120 12-120 m3/hr 100mm 550mm Flange

OPTIONS:


Page 5 - Section 17


Catalogue 2017

Section 17flow

17

SECTION 17


PAGE 6 2017


LZS SERIES PLASTIC TUBE FLOW METERS WITH LIMIT SWITCH

STANDARD FEATURES: TAPERED TUBE IS CHEMICAL RESISTANT

AS PLASTIC FLOAT IS ABS GUIDE IS 316SS (PTFE ON REQUEST) END CONNECTIONS ARE PVC (ABS ON

REQUEST) UNION CONNECTIONS FOR EASY

DISASSEMBLY / CLEANING ACCURACY ±4% TEMPERATURE RANGE 0-60°C PRESSURE (MAX) 6 BAR 12 MONTH WARRANTY*

Model Flow Rate Nominal Diameter Height Connections

LZS-15D-50 SW 5-50 LPH 15mm 202mm 1/2” BSP






LZS-25-1600 SW 160-1600 LPH 25mm 226mm 3/4” BSP

LZS-25-2500 SW 250-2500 LPH 25mm 226mm 3/4” BSP

LZS50D-16 SW 1.6-16 m3/hr 50mm 341mm 1 1/2” BSP

MODEL:


Section 17 - Page 6


Catalogue 2017

Section 17flow

17

SECTION 17


PAGE 7 2017


EMEC PULSE OUTPUT WATER METERS

PULSE OUTPUT OPTIONS FOR CATFI / CATCI:

0.25, 0.5, 1, 2.5, 5, 10, 25, 50, 100, 250, 500, 1000 litres per pulse. All meters come with 2.5m cable standard. Longer cable available on request.

MODEL:

CATCI HOT WATER METERS WITH DRY DIAL: MAXIMUM TEMPERATURE 90°C, 16 BAR.

Model Nominal Diameter

mm

Nominal Flow-rate

M3/hr

Maximum Flow-rate

M3/hr

Minimum Flow-rate

L/hr

Lowest reading unit

litres Fittings Size

LxWxH

CATCI15 15 1.5 3 10 0.01L 1/2” 110x80x110

CATCI20 20 2.5 5 15 0.01L 3/4” 130x80x110

CATCI25 25 3.5 7 20 0.1L 1” 160x100x132

CATCI30 30 5 10 20 0.1L 1 1/4” 180x100x132

CATCI40 40 10 20 25 0.1L 1 1/2” 200x110x137

CATCI50 50 15 30 50 0.5L 2” 300x108x131


CATFI COLD WATER METERS WITH DRY DIAL: MAXIMUM TEMPERATURE 30°C, 16 BAR.


mm

Nominal Flow-rate

M3/hr

Maximum Flow-rate

M3/hr

Minimum Flow-rate

L/hr

Lowest reading unit

litres Fittings Size

LxWxH

CATFI15 15 1.5 3 10 0.01L 1/2” 110x80x110

CATFI20 20 2.5 5 15 0.01L 3/4” 130x80x110

CATFI25 25 3.5 7 20 0.1L 1” 160x100x132

CATFI30 30 5 10 20 0.1L 1 1/4” 180x100x132

CATFI40 40 10 20 25 0.1L 1 1/2” 200x110x137

CATFI50 50 15 30 50 0.5L 2” 300x108x131

Page 7 - Section 17


Catalogue 2017

Section 17flow

17

SECTION 17


PAGE 8 2017


EMEC PULSE OUTPUT WATER METERS

MODEL:

MULTIPLE PULSE OUTPUT OPTIONS ARE AVAILABLE:

Specify 1, 10 or 100 litres per pulse. Others available on request. All meters come with 2.5m cable standard. Longer cable available on request.

Teflon coated for corrosion resistance


CATFIT COLD WATER METERS WITH DRY DIAL AND INTERNAL & EXTERNAL TEFLON COATING: MAXIMUM TEMPERATURE 30°C, 16 BAR.


mm

Nominal Flow-rate

M3/hr

Maximum Flow-rate

M3/hr

Minimum Flow-rate

L/hr

Lowest reading unit

litres

Max Pressure

Bar Size

LxWxH

CATFIT15 15 1.5 3 10 0.01L 16 110x80x110

CATFIT20 20 2.5 5 15 0.01L 16 130x80x110

CATFIT25 25 3.5 7 20 0.1L 16 160x100x132

CATFIT30 30 5 10 20 0.1L 16 180x100x132

CATFIT40 40 10 20 25 0.1L 16 200x110x137

CATCIT HOT WATER METERS WITH DRY DIAL AND INTERNAL & EXTERNAL TEFLON COATING: MAXIMUM TEMPERATURE 90°C, 16 BAR.


mm

Nominal Flow-rate

M3/hr

Maximum Flow-rate

M3/hr

Minimum Flow-rate

L/hr

Lowest reading unit

litres

Max Pressure

Bar Size

LxWxH

CATCIT15 15 1.5 3 10 0.01L 16 110x80x110

CATCIT20 20 2.5 5 15 0.01L 16 130x80x110

CATCIT25 25 3.5 7 20 0.1L 16 160x100x132

CATCIT30 30 5 10 20 0.1L 16 180x100x132

CATCIT40 40 10 20 25 0.1L 16 200x110x137

Section 17 - Page 8


Catalogue 2017

Section 17flow

17

SECTION 17


PAGE 9 2017


EMEC FLANGED PULSE OUTPUT WATER METERS

MODEL:

CWFA FLANGED COLD WATER METERS WITH DRY DIAL: MAXIMUM TEMPERATURE 60°C, 16 BAR.


mm

Nominal Flow-rate

M3/hr

Maximum Flow-rate

M3/hr

Minimum Flow-rate

M3/hr

Lowest reading unit

litres Flange Size

LxWxH

CWFA50 50 15 100 0.3 1 2” 200x165x214

CWFA65 65 25 100 0.4 1 2 1/2” 200x185x228

CWFA80 80 40 170 0.4 1 3” 230x200x234

CWFA100 100 60 300 0.6 10 4” 250x200x250

CWFA150 150 150 410 1.0 10 6” 300x283x310

CWFA200 200 250 730 2 100 8” 350x340x338

CWFA250 250 400 1400 6 100 10” 450x406x438

CWFA300 300 600 2000 7 100 12” 500x460x465

CWCA FLANGED HOT WATER METERS WITH DRY DIAL: MAXIMUM TEMPERATURE 130°C, 16 BAR.


mm

Nominal Flow-rate

M3/hr

Maximum Flow-rate

M3/hr

Minimum Flow-rate

M3/hr

Lowest reading unit

litres Flange Size

LxWxH

CWCA50 50 15 100 0.3 1 2” 200x165x214

CWCA65 65 25 100 0.4 1 2 1/2” 200x185x228

CWCA80 80 40 170 0.4 1 3” 230x200x234

CWCA100 100 60 300 0.6 10 4” 250x200x250

CWCA150 150 150 410 1.0 10 6” 300x283x310

CWCA200 200 250 730 2 100 8” 350x340x338


Page 9 - Section 17


Catalogue 2017

Section 17flow

17

SECTION 17


PAGE 10 2017


EMEC FLANGED PULSE OUTPUT WATER METERS


EMEC KDPV CONNECTION KIT

PULSE OUTPUT OPTIONS:

250, 500, 1000 litres per pulse. Others on request.

CWFAT FLANGED COLD WATER METERS WITH DRY DIAL AND INTERNAL & EXTERNAL TEFLON COATING: MAXIMUM TEMPERATURE 60°C, 16 BAR.


mm

Nominal Flow-rate

M3/hr

Maximum Flow-rate

M3/hr

Minimum Flow-rate

M3/hr

Lowest reading unit

litres Flange Size

LxWxH

CWFAT50 50 15 100 0.3 1 2” 200x165x214

CWFAT65 65 25 100 0.4 1 2 1/2” 200x185x228

CWFAT80 80 40 170 0.4 1 3” 230x200x234

CWFAT100 100 60 300 0.6 10 4” 250x200x250

Model Description

KDPV Connection kit to control two proportional pumps with one pulse emitter water meter. Cable BNC/BNC (1m)

Teflon coated for corrosion resistance

MODEL:



Catalogue 2017

Section 18level

18

CATALOGUE—2017

2017


INDEX

SECTION 18—LEVEL

AQUA FLOAT SWITCHES PAGE 1

AQUA FLOAT WEIGHTS PAGE 2

SUBMERSIBLE LEVEL TRANSDUCERS PAGE 3

CXULM G INDUSTRIAL ULTRASONIC LEVEL DETECTOR WITH DISPLAY PAGE 4

CXULM T PLASTIC ULTRASONIC LEVEL DETECTOR WITH DISPLAY PAGE 5

CXULM CIT MINIATURE ULTRASONIC LEVEL DETECTOR PAGE 6

CXULM C ULTRASONIC LEVEL DETECTOR PAGE 7



Catalogue 2017

Section 18level

18

CATALOGUE SECTION 18 — LEVEL



AQUA FLOAT SWITCHES

AQUA BMS FLOAT SWITCH

AQUA GMS FLOAT SWITCH COMPACT GENERAL PURPOSE FLOAT SWITCH

Materials Polypropylene Body, Rubber Cable

Applications Switching pumps, for filling or emptying, alarms or control

Operating temperature 0 - 40 degrees C

Specifications 20 (8)A 250VAC N/O and N/C 200ml buoyancy, IP68, 1 Bar

Dimensions 74 x 124 x 38mm

Approvals TUV, CE

Model No: Description:

A5010050 With 3m Cable




HEAVY DUTY FLOAT SWITCH

Materials Polypropylene Body, Rubber Cable

Applications Suitable for dirty water applications, e.g. chambers with sludge and scum

Operating temperature 0 - 40 degrees C

Specifications 20 (8)A 250VAC N/O and N/C 560ml buoyancy, IP68, 1 Bar


Approvals TUV, CE


Page 1 - Section 18


Catalogue 2017

Section 18level

18




AQUA FLOAT WEIGHTS


A5018060 Small Weight, to suit GMS floats

A5018040 Large Weight, to suit BMS floats

AQUA FLOAT WEIGHTS COUNTERWEIGHT FOR CORRECT FLOAT OPERATION

Features Built in re-usable cable lock


Section 18 - Page 2


Catalogue 2017

Section 18level

18




SUBMERSIBLE LEVEL TRANSDUCER


CXPTB-1 Submersible Level Transducer 0-1m, 2 wire 4-20mA, 2m cable

CXPTB-2 Submersible Level Transducer 0-2m, 2 wire, 4-20mA, 3m cable



STANDARD FEATURES: ECONOMICAL IP68 316 STAINLESS STEEL ACCURACY 0.5% FS LONG TERM STABILITY 24VDC 4-20MA OUTPUT 0-60°C NO CALIBRATION REQUIRED 12 MONTH WARRANTY*

APPLICATIONS INCLUDE: Water tanks, Wells, Lakes, Rivers, Sewage plants, Ground water monitoring.

MODELS:

OPTIONS:

5VDC version, 1-5V output, Hart protocol, depth ranges up to 200m, longer cables on request. Remote level display.


Page 3 - Section 18


Catalogue 2017

Section 18level

18




ULTRASONIC LEVEL DETECTOR MODEL CX-ULM-G


CXULM GA-2 Ultrasonic level detector, 3 wire, 4-20mA, 0-2m, 24VDC, LED display, programmable min and max depth, 1 1/2” mounting thread

CXULM GA-5 Ultrasonic level detector, 3 wire, 4-20mA, 0-5m, 24VDC, LED display, programmable min and max depth, 1 1/2” mounting thread

STANDARD FEATURES: NON CONTACT TANK DEPTH MEASUREMENT INDUSTRIAL CAST ALUMINIUM HOUSING LCD DISPLAY ACCURACY ±0.3% OF FULL SCALE DEAD BAND 0.3M 24VDC, 1.5W OUTPUT: 4-20MA. AUTOMATIC TEMPERATURE COMPENSATION PROGRAMMABLE RANGE SETTING LEVEL OF PROTECTION: IP65 12 MONTH WARRANTY*

APPLICATIONS INCLUDE: Water storage tanks, wastewater tanks, Sedimentation ponds, environmental monitoring, Clarifiers, sludge thickening.

MODELS:

OPTIONS: Sensing ranges: 0 to 2, 5, 8, 10, 15, 20 or 25m. LED display. Explosion proof version. Corrosion resistant version. 2 wire or 3 wire version. 485 (MODBUS) version. Relay outputs.


Section 18 - Page 4


Catalogue 2017

Section 18level

18




ULTRASONIC LEVEL DETECTOR MODEL CX-ULM-T


CXULM T1A Ultrasonic level detector, 3 wire, 4-20mA, 0-1m, 24VDC, LCD display, 0.06m dead band

CXULM T2A Ultrasonic level detector, 3 wire, 4-20mA, 0-2m, 24VDC, LCD display, 0.15m dead band

STANDARD FEATURES: NON CONTACT TANK DEPTH MEASUREMENT HIGH RESOLUTION (1MM) HOUSING OF ABS AND PP LCD DISPLAY UNDER CAP ACCURACY ±1.5MM AUTOMATIC TEMPERATURE COMPENSATION PROGRAMMABLE RANGE SETTING 24VDC, 1.5W OUTPUT: 4-20MA LEVEL OF PROTECTION: IP65 12 MONTH WARRANTY*

APPLICATIONS INCLUDE: General purpose liquid measurement in small tanks where high accuracy is important.

MODELS:

OPTIONS: LED display. Explosion proof version. RS485 (MODBUS) version.


Page 5 - Section 18


Catalogue 2017

Section 18level

18




ULTRASONIC LEVEL DETECTOR MODEL CX-ULM-CIT


CXULM CIT-1 Ultrasonic level detector, 3 wire, 4-20mA, 0-1m, 24VDC, 0.06m dead band

CXULM CIT-2 Ultrasonic level detector, 3 wire, 4-20mA, 0-2m, 24VDC, 0.15m dead band

STANDARD FEATURES: NON CONTACT TANK DEPTH MEASUREMENT ULTRA COMPACT (30MM DIA X 95MM H) HOUSING OF ABS AND PP NO DISPLAY ACCURACY ±0.3% OF FULL SCALE AUTOMATIC TEMPERATURE COMPENSATION 24VDC, 1W OUTPUTS: 4-20MA LEVEL OF PROTECTION: IP65 M12 PLUG CONNECTION 12 MONTH WARRANTY*

APPLICATIONS INCLUDE: General purpose liquid measurement in limited space applications.

MODELS:

OPTIONS: LCD display. RS485 (MODBUS) version. Remote LCD display.


Section 18 - Page 6


Catalogue 2017

Section 18level

18




STANDARD FEATURES: NON CONTACT TANK DEPTH MEASUREMENT 55MM DIAMETER X 119 HIGH NO DISPLAY ACCURACY ±0.3% OF FULL SCALE 4-20MA OUTPUT 24VDC/300MA LEVEL OF PROTECTION: IP67 1.5M CABLE 12 MONTH WARRANTY*

General purpose liquid measurement - water, wastewater, chemical storage, pharmaceuticals, environmental monitoring, sewage treatment.

ULTRASONIC LEVEL DETECTOR MODEL CX-ULM-C


CXULM C-1 Ultrasonic level detector, 3 wire, 4-20mA, 0-1m, 0.3m dead band

CXULM C-2 Ultrasonic level detector, 3 wire, 4-20mA, 0-1m, 0..25m dead band

CXULM CR-2 Ultrasonic level detector, 2 wire, 4-20mA, 0-2m, 0.25m dead band


MODELS:

OPTIONS: RS485 (MODBUS). Explosion proof version. Detection ranges up to 8m. Remote LCD display.


Page 7 - Section 18


Catalogue 2017

Section 19PreSSure

19

CATALOGUE—2017

2017


INDEX

SECTION 19—PRESSURE

PRESSURE GAUGES PAGE 1

PRESSURE GAUGES WITH LIMIT SWITCHES PAGE 2

PRESSURE TRANSDUCERS PAGE 3

PRESSURE SWITCHES PAGE 4



Catalogue 2017

Section 19PreSSure

19

CATALOGUE SECTION 19 — PRESSURE



GENERAL PURPOSE PRESSURE GAUGE

Model No: Pressure Range:

YTN63-200 0-200kPa

YTN63-400 0-400kPa

YTN63-600 0-600kPa

YTN63-800 0-800kPa

YTN63-1000 0-1000kPa

YTN63-2000 0-2000kPa

GENERAL PURPOSE PRESSURE GAUGE

Supplied complete with removable panel mount bracket.

OIL DAMPENED GAUGE WITH DUAL SCALE (KPA & PSI)

Dimensions 63mm diameter

Connections 1/4” BSPT Back Entry

Materials Stainless steel case, brass internals

Application Gases, water and other liquids not corrosive to brass

Operating Temperature 0-55°C

Enquire about different diameters, different ranges, alternative threads, alternative scales, budget options, gauges with stainless steel internals and vacuum gauges.

PRESSURE GAUGES

OIL DAMPENED GAUGE WITH DUAL SCALE (KPA & PSI) Dimensions 63mm diameter

Connections 1/4” BSPT Bottom Entry

Materials Stainless steel case, brass internals

Application Gases, water & other liquids not corrosive to brass


Model No: Pressure Range:

YTN63Z-200 0-200kPa

YTN63Z-400 0-400kPa

YTN63Z-600 0-600kPa

YTN63Z-800 0-800kPa

YTN63Z-1000 0-1000kPa

YTN63Z-2000 0-2000kPa


Page 1 - Section 19


Catalogue 2017

Section 19PreSSure

19




SWITCH GAUGE

PRESSURE GAUGES WITH LIMIT SWITCHES

PRESSURE GAUGE WITH ADJUSTABLE LOW & HIGH LIMIT SWITCHES

Dimensions 60mm diameter

Connections 1/4” BSPT bottom entry

Materials Plastic case, brass internals

Application Gases, water and other liquids not corrosive to brass


Ranges 0-1MPA

Contacts 230VAC / 30VA

Model No: YXC-60


Section 19 - Page 2


Catalogue 2017

Section 19PreSSure

19




CXPTB100H PRESSURE SENSOR

PRESSURE TRANSDUCERS

Dimensions 34mm diameter x 75mm high

Connections 1/2” NPT

Materials 316SS

Application Air and liquid pressure measurement

Operating Temperature -20 to 125°C

Protection IP65

Input Voltage 24VDC

Output 4-20mA


CXPTB100H-35 Pressure transducer 1/2” NPT 0-35kpa, 2 wire, 4-20mA

CXPTB100H-400 Pressure transducer 1/2” NPT, 0-400kpa, 2 wire, 4-20mA

CXPTB100H-600 Pressure transducer 1/2” NPT, 0-600kpa, 2 wire, 4-20mA

CXPTB100H-1000 Pressure transducer 1/2” NPT, 0-1Mpa, 2 wire, 4-20mA

MODELS:

OPTIONS: Pressure ranges from 10kpa to 100Mpa, 5V version, Alternative connection options.


Page 3 - Section 19


Catalogue 2017

Section 19PreSSure

19




TELEMECHANIQUE PRESSURE SWITCH

PRESSURE SWITCHES

Model No: XMPA12B2131

N/C PRESSURE SWITCH


Connections 1/4” BSP bottom entry

Materials Plastic case, brass internals

Application Contact closes when the pressure goes low, for pump operation.

Pressure 19-174 psi

Contacts 230V, 12A, 1.5kW

Option Also available in 3 phase version


Section 19 - Page 4


Catalogue 2017

Section 20teSting

20

CATALOGUE—2017

2017


INDEX

SECTION 20—TESTING

WATER QUALITY TEST STRIPS PAGE 1

WATER HARDNESS TEST TABLETS PAGE 2

REAGENT STRIPS FOR FREE CHLORINE DPD 10ML SAMPLE PAGE 2

POOL & SPA WATER QUALITY TEST STRIPS PAGE 3

EXACT MULTIFUNCTION PHOTOMETER TESTERS PAGE 4

EXACT IDIP PHOTOMETER TESTER PAGE 5

EXACT PHOTOMETER REAGENT STRIPS PAGE 6 & 7

HM DIGITAL HANDHELD DIGITAL WATER TESTERS PAGE 8 & 9

HM DIGITAL IN–LINE TDS MONITORS PAGE 10

BUFFER SOLUTIONS PAGE 11

CORROSION COUPONS PAGE 12



Catalogue 2017

Section 20teSting

20

CATALOGUE SECTION 20 — TESTING



WATER QUALITY TEST STRIPS

Code Parameter No. of Tests Ranges

480005 Alkalinity—Total (+ pH) Bottle of 50 TA: 0,80,120,180,240,360 ppm. pH: 6-9

480001 Bromine Bottle of 50 0, 0.05, 0.25, 0.5, 0.75, 1, 2, 3, 4, 5 ppm

480007 Total Chlorine Ultra Low Packet of 30 <0.01, 0.01, 0.015, 0.02, 0.025, 0.05 ppm

480010 Chlorine – Total Bottle of 50 0, 0.05, 0.1, 0.15, 0.2, 0.5, 0.8, 1, 4, 10 ppm

481026 Chlorine – Free Bottle of 50 0, 0.05, 0.1, 0.2, 0.4, 0.6, 0.8, 1.2, 1.5, 2, 2.6, 4, 6 ppm

480022 Chlorine – Free (High Range) Bottle of 50 0, 1, 2, 5, 10, 20, 30, 40, 80, 120 ppm

481028 Chlorine Dioxide Bottle of 50 Two methods provide two ranges—0 to 0.3, 0 to 1.6ppm

480031 Chlorine Dioxide (high Range) Bottle of 50 0, 0.5, 2, 5, 10, 25, 50, 100 ppm

480042 Copper Bottle of 25 0, 0.05, 0.1, 0.2, 0.4, 1, 2, ppm

480008 Hardness– Total Bottle of 50 0, 40, 80, 120, 180, 250, 425, 1000 ppm

480025 Iron Bottle of 25 0, 0.02, 0.05, 0.1, 0.2, 0.3, 0.5, 0.75, 1, 2, 5 ppm.

481020 Manganese Packet of 24 0.05, 0.1, 0.2, 0.5, 1, 2 ppm

480009 Nitrate, Nitrite Bottle of 50 NO2: 0.15, 0.3, 1, 1.5, 3, 10, NO3: 0.5, 2, 5, 10, 20, 50 ppm

481234 Ozone Bottle of 50 0, 0.05, 0.1, 0.2, 0.3, 0.4, 0.5 ppm

480014 Peroxide Bottle of 50 0, 0.5, 2, 5, 10, 25, 50, 100 ppm

481104 pH—Extended Range Bottle of 50 2, 3, 4, 5, 6, 6.5, 7, 7.5, 8, 8.5, 9, 9.5, 10, 11, 12 pH

482029 Total Dissolved Solids Bottle of 50 <50, 100, 250, 500, >750 ppm

480026 Zinc Bottle of 50 0, 2, 5, 10, 20, 40, 100 ppm

Our comprehensive range of test strips provide an easy, accurate, non technical method of checking for common water problems, and verifying the performance of water treatment equipment.

Page 1 - Section 20


Catalogue 2017

Section 20teSting

20




WATER HARDNESS TEST TABLETS

DESCRIPTION: HARDNESS YES/NO EASY TO USE QUICK WATER SOFTENER TEST COLOUR CHANGE AT 20MG/L

HARDNESS AS CACO3

Code Product Name No. of Tests

AD-1012 PalintestR Water Hardness Yes/No Test Tablets 250 tablets

DESCRIPTION: DPD1 FREE CHLORINE REAGENT STRIPS ALTERNATIVE REAGENT DELIVERY METHOD NO POWDER TO SPILL, NO TABLETS TO CRUSH FAST AND ACCURATE FOR ALL METERS WITH 10ML SAMPLE


484101 DPD1 Free Chlorine reagent strips 100

Section 20 - Page 2


Catalogue 2017

Section 20teSting

20




POOL & SPA WATER QUALITY TEST STRIPS


Range and Resolution

481335 Pool CheckTM 3in1 test strip Bottle of 50 Free Chlorine: 0, 0.5, 1, 3, 5, 10, 20 ppm pH: 6, 6.4, 6.8, 7.2, 7.6, 8.2, 9 Total Alkalinity: 0, 40, 80, 120, 180, 240, 360 ppm

481330 Pool CheckTM 6in1 test strip Bottle of 50 Free Chlorine: 0, 0.5, 1, 3, 5, 10, 20 ppm. Total Chlorine / Total Bromine: 0, 0.5, 1, 3, 5, 10 pH: 6, 6.8, 7.2, 7.6, 7.8, 8.2, 9 Total Alkalinity: 0, 40, 80, 120, 180, 240, 360 ppm Total Hardness: 0, 50, 120, 200, 400, 1000 Cyanuric Acid:

481336 Spa CheckTM 3in1 test strip Bottle of 50 Total Bromine: 0, 1, 3, 6, 9, 12, 20 pH: 6, 6.4, 6.8, 7.2, 7.6, 7.8, 8.2, 9 Total Alkalinity: 0, 40, 80, 120, 180, 240, 360 ppm

481348 Pool CheckTM Copper 3in1 test strip

Bottle of 50 Copper: 0, 0.2, 0.4, 0.6, 0.8, 1, 2 ppm pH: 6, 6.4, 6.8, 7.2, 7.6, 8.2, 9 Total Alkalinity: 0, 40, 80, 120, 180, 240, 360 ppm

481347 Pool CheckTM TDS test strip Bottle of 35 Total Dissolved Solids: 0, 500, 1500, 3000, 5000 ppm

482341 Pool CheckTM Salt test strip Bottle of 16 Sodium Chloride: 1500, 2000, 2500, 3000, 5000 ppm

Designed with the pool and spa owners in mind, Pool CheckTM test strips offer quick and reliable results. Pool CheckTM offers a wide range of multi-parameter tests to suit all your customers needs.

Page 3 - Section 20


Catalogue 2017

Section 20teSting

20




EXACT MULTIFUNCTION WATER TESTER PHOTOMETER

DESCRIPTION: IDEAL FOR DRINKING WATER, POOLS,

ENVIRONMENTAL & EDUCATIONAL TESTING MULTIPLE PARAMETERS AVAILABLE LCD DISPLAY OF MEASURED VALUE BLUETOOTH COMMUNICATION

Code Standard Water Quality Testing Parameters

Range

Exact Chlorine Plus 486696-PlusK (525nm)

Free and total Chlorine Bromine Ozone Chlorine Dioxide Peracetic Acid Hydrogen Peroxide Transmission (custom tests) High range Chlorine

0.00-11ppm 0.0-14ppm 0.01-9ppm 0-12ppm 0-9ppm 0-3ppm 99.9-0.01% 0-300ppm

Exact Micro 20 (Dual Wavelength)* 486700-WD (Well driller) (525 and 638nm)

Free and total Chlorine Total Iron Total Alkalinity Total Hardness pH Copper Manganese

0-5ppm 0.04-8ppm 1-320ppm 4-300ppm 5.5-8.8pH 0-11ppm 0.02-1.5ppm

Exact Micro 20 (Dual Wavelength)* 486700-K (Standard)

Free and total Chlorine 0-5ppm

* The Exact Micro 20 Meter can be used for additional parameters with the correct reagents, including Aluminium, Ammonia, Calcium Hardness, Chloride, Chlorine Dioxide, Cyanide, Fluoride, Permanganate, Nitrites, Nitrates, Phosphates, Ozone, Peracetic Acid, Sulphates and Sulphides.

Advanced photometric handheld water tester for use with Sensafe reagent strips.

Section 20 - Page 4


Catalogue 2017

Section 20teSting

20




EXACT IDIP TESTER

DESCRIPTION: MULTIPLE PARAMETER DIGITAL TESTER USES EXACT REAGENT STRIPS BLUETOOTH ENABLED FOR COMMUNICATION LCD DISPLAY OF MEASURED VALUE DOWNLOAD THE APP FROM THE APP STORE TRANSFER TEST RESULTS TO SMART PHONE

WITH DATE STAMP & LOCATION STORE RESULTS INDEFINITELY SEND RESULTS BY TEXT, EMAIL ETC

Pre-installed tests are Total Alkalinity, Free Chlorine, Combined Chlorine and pH. Further tests methods are downloaded as required from the App Store. Tests are added to the App Store for download as they are developed. There are currently 41 parameters available.

Page 5 - Section 20


Catalogue 2017

Section 20teSting

20




EXACT PHOTOMETER REAGENT STRIPS

Code Parameter Range (PPM) No of tests

486641 Alkalinity (total) 10-210 100

486821 Aluminium 0.01 to 1.2 50

486654 Ammonia 0.02 to 2.4 25

486636 Bromine (DPD1) 0.01 to 12 100

486629 Calcium Hardness 20 to 400 100

486757 Chloride (as NaCl) 3 to 270 (50 to 5400) 100

486633 Chlorine Dioxide (DPD1) 0.04 to 7 100

486638 DPD3 Combined Chlorine 0.01 to 6.2 100

486637 DPD1 Free Chlorine 0-6 100

486672 Chlorine (high range) 1-300 50

486670 DPD4 Total Chlorine 0.01 to 6.2 100

486632 Copper 0.01 to 11 50

486643 Fluoride 0.04 to 1.5 50

486630 Hardness (low range) 1 to 80 100

486656 Hardness (high range) 60-600 50

Section 20 - Page 6


Catalogue 2017

Section 20teSting

20

�� 20 � ��

�� 20 P�� 7 2017

PO �� 300-596� A�� A�� 0752� N�� 09 281 1865 [email protected]

�� P�� R��

Code Parameter Range (PPM)

486675 Peracetic Acid (high range) 0.01 to 430

486626 Permangenate (DPD1) 0.01 to 5

486639 pH (drinking water) 6.2-8.4

486624 pH (acid) 3.2 to 6

486609 pH (alkali) 7.2 to 9.8

486814 Phosphate 0.03 to 4

486608 Sulphate 0.01 to 1.6

486818 Sulphide 0.01 to 1.6

More parameters available on request

No of tests

100

100

100

50

50

50

50

50

486650 Iron (total) 0.03 to 6 50

486606 Manganese 0.01 to 1.5 24

486655 Nitrate (as NO3) 0.01 to 30 50

496634 Ozone (DPD4) 0.01 to 2 100

486674 Peracetic Acid (low range) 0.01 to 6 100

486648 Hydrogen Peroxide 0.3 to 100 50

Page 7 - Section 20


Catalogue 2017

Section 20teSting

20




HM DIGITAL HANDHELD TESTERS

HM Digital handheld premier water quality meters are extremely simple to use, accurate, and waterproof (IP67-floats). Large LCD display, with auto-off, data hold and low battery indicator.

HM DIGITAL COM-100 ELECTRICAL CONDUCTIVITY / TOTAL DISSOLVED SOLIDS METER

Measures Electrical Conductivity, Total Dissolved Solids and Temperature. Ranges: 0 to 9990µS, 0 to 9.99mS 0 to 8560 ppm, 8.56 ppt 1 to 80°C Resolution: 0.1µS or 0.1ppm Accuracy: +/- 2% Three calibration options: KCL, 442, NaCl. Automatic temperature compensation.

HM DIGITAL PH-200 PH METER

Measures pH and Temperature. Ranges: 0.00 to 14.00 1 to 80°C Resolution: 0.01pH , 0.1°C Accuracy: +/- .02pH Automatic temperature compensation. Includes reference solution in cap. Replaceable glass sensor and reference tube.

HM DIGITAL ORP-200 ORP METER

Measures Oxidation Reduction Potential (REDOX) and Temperature. Ranges: -999 to 1000mV 1 to 80°C Resolution: 1mV, 0.1°C Accuracy: +/- 0.5% Glass sensor and platinum electrode. Replaceable electrode.

Section 20 - Page 8


Catalogue 2017

Section 20teSting

20




HM DIGITAL HANDHELD TESTERS

HM DIGITAL TDS-3 TOTAL DISSOLVED SOLIDS METER

Measures Total Dissolved Solids and Temperature. Ranges: 0 to 9990 ppm 1 to 80°C Resolution: 1ppm to 999ppm, 10ppm to 9990ppm Accuracy: +/- 2% Automatic temperature compensation. 1000 hour battery life. Supplied with handy belt-clip carry case. 3 year warranty.

Economical commercial hand-held conductivity meters with large LCD display.

HM DIGITAL EC-3 ELECTRICAL CONDUCTIVITY METER

Measures Electrical Conductivity and Temperature. Ranges: 0 to 9990 µS 1 to 80°C Resolution: 1µS: 0 to 999uS, 10uS: 1000µS to 9990µS Accuracy: +/- 2% Automatic temperature compensation. 1000 hour battery life. Supplied with handy belt-clip carry case. 3 year warranty.


Page 9 - Section 20


Catalogue 2017

Section 20teSting

20




HM DIGITAL IN-LINE TDS MONITORS

HM DIGITAL DM-2 DUAL IN-LINE TOTAL DISSOLVED SOLIDS METER

Displays instant TDS levels of the feed water and purified water with in & out sensors. Large easy to read LCD display, splash proof housing. Ranges: 0-9990ppm Resolution: 1ppm Accuracy: +/- 2% Fittings: 1/4” T-fittings (also available with 3/8” or 1/2”) Dimensions: 11.6 x 6.8 x 1.8 cm 116cm Sensor cable length. Automatic Temperature compensation (1 to 65°C). Installs in minutes. Powered by 2 AA batteries. 750 hours battery life.

HM DIGITAL SM-1 IN-LINE TOTAL DISSOLVED SOLIDS METER

Displays the TDS level of a single water line. Ideal for knowing instantly if your water purification system is performing or not. Auto-off function conserves battery power; unit shuts off automatically after 10 minutes of non-use. Ranges: 0-9990ppm Resolution: 1ppm Accuracy: +/- 2% Fittings: 1/4” T-fitting (also available with 3/8” or 1/2”) Dimensions: 7.6 x 2 x 4.7 cm 62cm Sensor cable length. Automatic Temperature compensation (1 to 65°C). Installs in minutes. Powered by 2 x 1.5V button cells. 1000 hour battery life.



Catalogue 2017

Section 20teSting

20




EMEC CONDUCTIVITY BUFFER SOLUTION

EMEC OXYGEN BUFFER SOLUTION

PH BUFFER SOLUTIONS RICCA Chemical Company pH buffers. Traceable to US National Institute of standards and technology standard reference material.

pH 4 buffer solution Red - 500ml 1501

pH 7 buffer solution Yellow - 500ml 1551

pH 10 buffer solution Blue - 500ml 1601

EMEC TURBIDITY BUFFER SOLUTION Turbidity buffer solution 40NTU - 20ml BSTORB-40

Turbidity Buffer solution 0NTU - 20ml BSTORB-0

EMEC REDOX (ORP) BUFFER SOLUTION Redox (ORP) buffer solution 650mV - 50ml BSD

EMEC PH BUFFER SOLUTION pH4 buffer solution - 50ml BSA

pH 7 buffer solution - 50ml BSB

pH 10 buffer solution - 50ml BSC

Oxygen (O2) buffer solution - 50ml BSU

Conductivity buffer solution 12.88uS@25°C - 50ml BSI

Conductivity Buffer solution 1.43uS@25°C - 50ml BSE

Conductivity Buffer solution 84uS@25°C - 50ml BSE84

BUFFER SOLUTIONS



Catalogue 2017

Section 20teSting

20




CORROSION COUPONS

CORROSION COUPONS FOR USE WITH OUR CORROSION RACKS

Part No: Description:

M.CO1054170104100 Copper Coupon

M.CO1051590104100 316SS Stainless Coupon

M.CO1053750104100 Mild Steel Coupon

Many other materials available on request

For Corrosion Racks see section 23—Assemblies



Catalogue 2017

Section 21reSin & Media

21

CATALOGUE—2017

2017


INDEX

SECTION 21—RESIN & MEDIA

ION EXCHANGE RESIN & FILTER MEDIA PAGE 1



Catalogue 2017

Section 21reSin & Media

21

CATALOGUE SECTION 21 — RESIN & MEDIA



RESINEXTM ION EXCHANGE RESIN

RX KW-8 Water Softener Resin

RX MX-2 Mixed Bed De-ionizing Resin

RX MX-2 I Mixed Bed De-ionizing Resin with colour indicator

RX K8- H Cation Resin for demineralisers

RX A4 UB Anion Resin for demineralisers

FILTER MEDIA

35304 0.6-1.2mm Filter Sand

35303 Under-Bed Gravel

3534010 Anthracite Filter Media

3533009 Granular Activated Carbon

AK Akdolit pH Correction Media

SALT22 25kg Bag Grade 22 Salt

ION EXCHANGE RESIN & FILTER MEDIA

Many more specialised resins available on request

Page 1 - Section 21


Catalogue 2017

Section 22eMec PuMP SPare PartS & Media

22

CATALOGUE—2017

2017


INDEX

EMEC PUMP HEAD CODES PAGE 1

EMEC MAINTENANCE KITS PAGE 2 & 3

EMEC COMMON SPARE PARTS - F SERIES PAGE 4

EMEC COMMON SPARE PARTS - H SERIES PAGE 5

EMEC COMMON SPARE PARTS - V SERIES PAGE 6

EMEC COMMON SPARE PARTS - K SERIES PAGE 7

EMEC COMMON SPARE PARTS - A SERIES PAGE 8

SECTION 22—EMEC PUMP SPARE PARTS



Catalogue 2017


22

CATALOGUE SECTION 22 — EMEC PUMP SPARE PARTS

SECTION 22


PAGE 1 2017

EMEC SOLENOID PUMP SPARE PARTS

EMEC PUMP MODEL:

PUMP HEAD CODE:

EMEC PUMP MODEL:

PUMP HEAD CODE:

EMEC PUMP MODEL:

PUMP HEAD CODE:

K series 2001 I T series 0330 S VA series 1000.5 JA

K series 1802 L T series 0150 S VA series 0704 KA

K series 1504 L T series 00100 T VA series 0507.5 KA

K series 1005 L TA series 2003.2 LA VA series 0509 KA

K series 0808 L TA series 0510 NA VA series 0405.5 KA

K series 0510 L TA series 0413 NA VA series 0307 KA

K series 0501 I TA series 0320 SA VA series 0213 KA

K series 0218 M TA series 0135 TA VA series 0113.5 KA

KA series 1801 LA V series 2001 J WD series K

KA series 1503 LA V series 1802 K H series 2001 A

KA series 1003.5 LA V series 1502 K H series 1802 A or B*

KA series 1000.5 IA V series 1504 K H series 1004 B

KA series 8005.5 LA V series 1505 K H series 0706 B

KA series 5007.5 LA V series 1004 K H series 0408 B

KA series 0213 MA V series 1005 K H series 0216 B

A series 2505 L V series 1010 K HA series 2000.5 A (PMMA) A series 1510 M V series 0706 K HA series 1801 A or B* (PMMA) A series 1015 M V series 0510 K F series 1201.5 PCS

A series 0720 N V series 0512 K F series 1002.2 PCS

A series 0340 S V series 0501 J F series 0703 PCS

A series 0260 T V series 0408 K F series 0505 PCS

AA series 2503.2 LA V series 0310 K F series 0306.5 PCS

AA series 1506 MA V series 0217 K F series 0308.5 PCS

AA series 1010 MS V series 0116 K FA series 1000.6 PCA

AA series 0713 MS VA series 1802 KA FA series 1003.2 PCA

AA series 0330 SA VA series 1503 KA FA series 0701.5 PCA

AA series 0238.5 TA VA series 1501 KA FA series 0503.2 PCA

T series 2005 L VA series 1003.4 KA FA series 0304.7 PCA

T series 0515 N VA series 1007 KA FA series 0306.5 PCA

T series 0420 N VA series 1002 KA

* Early versions were A heads, later versions are B heads. There is an A or a B stamped into the plastic head. To select correct materials please refer to the chemical list - Section 30.

EMEC pump liquid ends are identified by a code. To select the correct spare parts, identify the code from the list below and then find the parts you need on the pages following. If you have any questions please contact us.

Page 1 - Section 22


Catalogue 2017


22


SECTION 22


PAGE 2 2017

EMEC MAINTENANCE KITS

Section 22 - Page 2


Catalogue 2017


22


SECTION 22


PAGE 3 2017

PUMP HEAD CODE: PART CODE: PUMP HEAD CODE: PART CODE:

J (PVDF+ EP 4x8 V Pump) 110.0620.1 “LA” PVDF + EP 4x6 AMS Pump Reinforced 110.0678.1

J (PVDF+ FP 4x8 V Pump) 110.0907.1 “LA” PVDF + FP 4x6 AMS Pump Reinforced 110.0679.1

JA (PVDF+ EP 4x8 V Pump) 110.0622.1 “LA” PVDF + EP 4x6 T Pump Reinforced 110.0684.1

JA (PVDF+ FP 4x8 V Pump) 110.0623.1 “LA” PVDF + FP 4x6 T Pump Reinforced 110.0685.1

K (PVDF + EP 4x6 V Pump) 110.0624.1 “M” PVDF + EP 6x8 K Pump 110.0663.1

K (PVDF + FP 4x6 V Pump) 110.0625.1 “M” PVDF + FP 6x8 K Pump 110.0662.1

K (PVDF + EP 6x8 V Pump) 110.6682.1 “M” PVDF + EP 4x6 AMS Pump Reinforced 110.0683.1

K (PVDF + FP 6x8 V Pump) 110.0876.1 “M” PVDF + FP 4x6 AMS Pump Reinforced 110.0686.1

KA (PVDF + EP 4x6 V Pump) 110.0626.1 “M” PVDF + EP 6x8 AMS Pump Reinforced 110.0920.1

KA (PVDF + FP 4x6 V Pump) 110.0627.1 “M” PVDF + FP 6x8 CMS Pump Reinforced 110.0836.1

KA (PVDF + FP 6x8 V Pump) 110.6683.1 “MA” PVDF + EP 6x8 K Pump 110.0959.1

KA (PVDF + EP 6x8 V Pump) 110.6684.1 “MA” PVDF + FP 6x8 K Pump 110.0665.1

I (PVDF + EP 4x6 K Pump Reinforced) 110.0659.1 “MA” PVDF + EP 4x6 AMS Pump Reinforced 110.0687.1

I (PVDF + FP 4x6 K Pump Reinforced) 110.0658.1 “MA” PVDF + FP 4x6 AMS Pump Reinforced 110.0864.1

IA (PVDF + EP 4x6 K Pump Reinforced) 110.0730.1 “MA” PVDF + EP 6x8 AMS Pump Reinforced 110.0688.1

IA (PVDF + FP 4x6 K Pump Reinforced) 110.0680.1 “MA” PVDF + FP 6x8 AMS Pump Reinforced 110.0914.1

L (PVDF + EP 4x6 K Pump) 110.0661.1 “N” PVDF + EP 6x8 AMS/T Pump 110.0689.1

L (PVDF + FP 4x6 K Pump) 110.0660.1 “N” PVDF + FP 6x8 AMS/T Pump 110.0690.1

L (PVDF + EP 4x6 K Pump Reinforced) 110.6685.1 “NA” PVDF + EP 6x8 AMS/T Pump 110.0865.1

L (PVDF + FP 4x6 K Pump Reinforced) 110.0955.1 “NA” PVDF + FP + CE 6x8 AMS/T Pump 110.0957.1

L (PVDF + EP 4x6 AMS Pump Reinforced) 110.0675.1 “S” PVDF + EP 8x10/8x12 AMS/T Pump 110.0925.1

L (PVDF + FP 4x6 AMS Pump Reinforced) 110.0863.1 “S” PVDF + FP 8x10/8x12 AMS/T Pump 110.0924.1

L (PVDF + EP 4x6 T Pump Reinforced) 110.0681.1 “SA” PVDF + EP 8x10/8x12 AMS/T Pump 110.0691.1

“L” (PVDF + FP 4x6 T Pump Reinforced) 110.0682.1 “SA” PVDF + FP 8 x10/8x12 AMS/T Pump 110.0692.1

“LA” (PVDF + EP 4x6 K Pump) 110.0672.1 “T” PVDF + EP 8x10/8x12 AMS Pump 110.0693.1

“LA” (PVDF + FP 4x6 K Pump) 110.0664.1 “T” PVDF + FP 8x10/8x12 AMS Pump 110.0694.1

“LA” (PVDF + EP 4x6 K Pump Reinforced) 110.0676.1 “TA” PVDF + EP 8x10/8x12 AMS Pump 110.0695.1

“LA” (PVDF + FP 4x6 K Pump Reinforced) 110.0677.1 “TA” PVDF + FP 8x10/8x12 AMS Pump 110.0696.1

EMEC MAINTENANCE KITS

PUMP HEAD CODE: PART CODE: PUMP HEAD CODE: PART CODE:

J (PVDF+ EP 4x8 V Pump) 110.0620.1 LA (PVDF + EP 4x6 AMS Pump Reinforced) 110.0678.1

J (PVDF+ FP 4x8 V Pump) 110.0907.1 LA (PVDF + FP 4x6 AMS Pump Reinforced) 110.0679.1

JA (PVDF+ EP 4x8 V Pump) 110.0622.1 LA (PVDF + EP 4x6 T Pump Reinforced) 110.0684.1

JA (PVDF+ FP 4x8 V Pump) 110.0623.1 LA (PVDF + FP 4x6 T Pump Reinforced) 110.0685.1

K (PVDF + EP 4x6 V Pump) 110.0624.1 M (PVDF + EP 6x8 K Pump) 110.0663.1

K (PVDF + FP 4x6 V Pump) 110.0625.1 M (PVDF + FP 6x8 K Pump) 110.0662.1

K (PVDF + EP 6x8 V Pump) 110.6682.1 M (PVDF + EP 4x6 AMS Pump Reinforced) 110.0683.1

K (PVDF + FP 6x8 V Pump) 110.0876.1 M (PVDF + FP 4x6 AMS Pump Reinforced) 110.0686.1

KA (PVDF + EP 4x6 V Pump) 110.0626.1 M (PVDF + EP 6x8 AMS Pump Reinforced) 110.0920.1

KA (PVDF + FP 4x6 V Pump) 110.0627.1 M (PVDF + FP 6x8 CMS Pump Reinforced) 110.0836.1

KA (PVDF + FP 6x8 V Pump) 110.6683.1 MA (PVDF + EP 6x8 K Pump) 110.0959.1

KA (PVDF + EP 6x8 V Pump) 110.6684.1 MA (PVDF + FP 6x8 K Pump) 110.0665.1

I (PVDF + EP 4x6 K Pump Reinforced) 110.0659.1 MA (PVDF + EP 4x6 AMS Pump Reinforced) 110.0687.1

I (PVDF + FP 4x6 K Pump Reinforced) 110.0658.1 MA (PVDF + FP 4x6 AMS Pump Reinforced) 110.0864.1

IA (PVDF + EP 4x6 K Pump Reinforced) 110.0730.1 MA (PVDF + EP 6x8 AMS Pump Reinforced) 110.0688.1

IA (PVDF + FP 4x6 K Pump Reinforced) 110.0680.1 MA (PVDF + FP 6x8 AMS Pump Reinforced) 110.0914.1

L (PVDF + EP 4x6 K Pump) 110.0661.1 N (PVDF + EP 6x8 AMS/T Pump) 110.0689.1

L (PVDF + FP 4x6 K Pump) 110.0660.1 N (PVDF + FP 6x8 AMS/T Pump) 110.0690.1

L (PVDF + EP 4x6 K Pump Reinforced) 110.6685.1 NA (PVDF + EP 6x8 AMS/T Pump) 110.0865.1

L (PVDF + FP 4x6 K Pump Reinforced) 110.0955.1 NA (PVDF + FP + CE 6x8 AMS/T Pump) 110.0957.1

L (PVDF + EP 4x6 AMS Pump Reinforced) 110.0675.1 S (PVDF + EP 8x10/8x12 AMS/T Pump) 110.0925.1

L (PVDF + FP 4x6 AMS Pump Reinforced) 110.0863.1 S (PVDF + FP 8x10/8x12 AMS/T Pump) 110.0924.1

L (PVDF + EP 4x6 T Pump Reinforced) 110.0681.1 SA (PVDF + EP 8x10/8x12 AMS/T Pump) 110.0691.1

L (PVDF + FP 4x6 T Pump Reinforced) 110.0682.1 SA (PVDF + FP 8 x10/8x12 AMS/T Pump) 110.0692.1

LA (PVDF + EP 4x6 K Pump) 110.0672.1 T (PVDF + EP 8x10/8x12 AMS Pump) 110.0693.1

LA (PVDF + FP 4x6 K Pump) 110.0664.1 T (PVDF + FP 8x10/8x12 AMS Pump) 110.0694.1

LA (PVDF + EP 4x6 K Pump Reinforced) 110.0676.1 TA (PVDF + EP 8x10/8x12 AMS Pump) 110.0695.1

LA (PVDF + FP 4x6 K Pump Reinforced) 110.0677.1 TA (PVDF + FP 8x10/8x12 AMS Pump) 110.0696.1

Page 3 - Section 22


Catalogue 2017


22


SECTION 22


PAGE 4 2017

PUMP HEAD SPARES

EMEC—F SERIES DOSING HEAD DESCRIPTION: PART CODE:

Dosing Head Complete (PCS) - EP (EPDM) seals 020.0496.1

Dosing Head Complete - FP (Viton) seals 020.0482.1

Suction / Discharge Valve 3/8” 4x6, EP 025.0436.1

Suction / Discharge Valve 3/8”, 4x6, FP 025.0459.1

Bleed Valve Kit - EP 025.0454.1

Bleed Valve Kit - FP 025.0601.1

Head O-ring - EP 127EPR

Head O-ring - FP 127V

Diaphragm PTFE 018.0001.0

EMEC—F SERIES SELF VENTING DOSING HEAD DESCRIPTION: PART CODE:

Dosing Head Complete (PCA) - FP (Viton) seals 020.0492.1

Self Vent Valve, PP, 4x6, FP 025.0721.1

Discharge Valve, 3/8” with Spring, 4x6, FP 025.0596.1

Suction Valve 3/8”, 4x6, FP 025.0459.1


Diaphragm PTFE 018.0001.0

Section 22 - Page 4


Catalogue 2017


22


SECTION 22


PAGE 5 2017

PUMP HEAD SPARES

EMEC—H SERIES DOSING HEAD DESCRIPTION: PART CODE:

Dosing Head Complete (A) - PP EP (EPDM seals), 4x8 020.0636.1

Dosing Head Complete (A) - PP FP (Viton seals), 4x8 020.0635.1

Dosing Head Complete (B) - PP EP (EPDM seals), 4x6 020.0467.1

Dosing Head Complete (B) - PP FP (Viton seals), 4x6 020.0560.1

Suction / Discharge Valve 3/8” 4x6, EP 025.0436.1

Suction / Discharge Valve 3/8”, 4x6, FP 025.0459.1

Bleed Valve Kit - EP 025.0454.1

Bleed Valve Kit - FP 025.0601.1

Head O-ring - EP (B) 127EPR

Head O-ring - FP (B) 127V

Diaphragm PTFE (A) 018.0027.0

Diaphragm PTFE (B) 018.0033.0

EMEC—H SERIES SELF VENTING DOSING HEAD DESCRIPTION: PART CODE:

Dosing Head Complete (A) - PMMA FP (Viton seals), 4x6 020.0839.1

Dosing Head Complete (B) - PMMA FP (Viton seals), 4x6 020.0705.1

Suction Valve 3/8” PVDF 4x6, FP 025.0424.1

Discharge Valve 3/8” PVDF, 4x6, FP with spring 025.0631.1

Bleed Valve Kit PVDF, 4x6, FP 025.0729.1

Head O-ring - FP (B) 127V

Diaphragm PTFE (A) 018.0027.0

Diaphragm PTFE (B) 018.0033.0

Page 5 - Section 22


Catalogue 2017


22


SECTION 22


PAGE 6 2017

EMEC—V SERIES DOSING HEAD DESCRIPTION: PART CODE:

Dosing Head Complete (J) - PVDF EP (EPDM) seals, 4x8 020.0986.1

Dosing Head Complete (J) - PVDF FP (Viton) seals, 4x8 020.0985.1

Dosing Head Complete (K) - PVDF EP (EPDM) seals, 4x6 020.0988.1

Dosing Head Complete (K) - PVDF FP (Viton) seals, 4x6 020.0987.1

Suction Valve Kit 4x6, EP 025.0906.1

Suction Valve Kit 4x6, FP 025.0811.1

Discharge Valve Kit 4x6, EP 025.0907.1

Discharge Valve Kit 4x6, FP 025.0812.1

Head O-ring - EP 127EPR


Diaphragm PTFE (K) 018.0001.0

Diaphragm PTFE (J) 018.0027.0

EMEC—VA SERIES SELF VENTING DOSING HEAD DESCRIPTION: PART CODE: Dosing Head Complete (JA) - PVDF FP (Viton) seals, 4x8 020.1196.1 Dosing Head Complete (KA) - PVDF FP (Viton) seals, 4x6 020.1015.1 Suction Valve Kit PVDF, FP 025.0811.1 Discharge Valve Kit PVDF, FP 025.1042.1 Bleed Valve Kit 4x6, PVDF, FP 025.0926.1 Head O-ring - FP 127V Diaphragm PTFE (KA) 018.0001.0 Diaphragm PTFE (JA) 018.0027.0

PUMP HEAD SPARES

Section 22 - Page 6


Catalogue 2017


22


SECTION 22


PAGE 7 2017

EMEC—K SERIES DOSING HEAD

EMEC—KA SERIES SELF VENTING DOSING HEAD DESCRIPTION: PART CODE: Dosing Head Complete (IA) - PVDF EP (EPDM) seals, 4x6 020.1163.1

Dosing Head Complete (IA) - PVDF FP (Viton) seals, 4x6 020.1162.1

Dosing Head Complete (LA) - PVDF EP (EPDM) seals, 4x6 020.1129.1

Dosing Head Complete (LA) - PVDF FP (Viton) seals, 4x6 020.1130.1

Dosing Head Complete (MA) - PVDF EP (EPDM) seals, 4x6 020.1131.1

Dosing Head Complete (MA) - PVDF FP (Viton) seals, 4x6 020.1132.1





Bleed Valve Kit, 4x6, EP 025.0910.1

Bleed valve Kit, 4x6, FP 025.0926.1

Head O-ring - EP (L) 127EPR

Head O-ring - FP (L) 127V

Diaphragm PTFE—L Head 018.0033.0

Diaphragm PTFE—I Head 018.0027.0

Diaphragm PTFE—M Head 018.0004.0

DESCRIPTION: PART CODE: Dosing Head Complete (I) - PVDF EP (EPDM) seals, 4x6 020.1123.1

Dosing Head Complete (I) - PVDF FP (Viton) seals, 4x6 020.1124.1

Dosing Head Complete (L) - PVDF EP (EPDM) seals, 4x6 020.1125.1

Dosing Head Complete (L) - PVDF FP (Viton) seals, 4x6 020.1126.1

Dosing Head Complete (M) - PVDF EP (EPDM) seals, 6x8 020.1127.1

Dosing Head Complete (M) - PVDF FP (Viton) seals, 6x8 020.1128.1





Head O-ring - EP (L) 127EPR

Head O-ring - FP (L) 127V

Diaphragm PTFE—L Head 018.0033.0

Diaphragm PTFE—I Head 018.0027.0

Diaphragm PTFE—M Head 018.0004.0

PUMP HEAD SPARES

Page 7 - Section 22


Catalogue 2017


22


SECTION 22


PAGE 8 2017

PUMP HEAD SPARES

DESCRIPTION: PART CODE: Dosing Head Complete (L) - PVDF, EP (EPDM seals), 4x6 020.1125.1 Dosing Head Complete (L) - PVDF, FP (Viton seals), 4x6 020.1126.1 Dosing Head Complete (M) - PVDF, EP (EPDM), 6x8 020.1127.1 Dosing Head Complete (M) - PVDF, FP (Viton), 6x8 020.1128.1 Dosing Head Complete (N) - PVDF, EP, 6x8 020.1635.1 Dosing Head Complete (N) - PVDF, FP, 6x8 020.1634.1 Dosing Head Complete (S) - PVDF, EP, 8x10, 8x12 020.1637.1 Dosing Head Complete (S) - PVDF, FP, 8x10, 8x12 020.1636.1 Dosing Head Complete (T) - PVDF, EP, 8x10, 8x12 020.1672.1 Dosing Head Complete (T) - PVDF, FP, 8x10, 8x12 020.1668.1 Suction Valve Kit, Head L, 4x6, PVDF, EP 025.0906.1 Suction Valve Kit , Head L, 4x6, PVDF, FP 025.0811.1 Suction Valve Kit, Head M, 6x8, PVDF, EP 025.1256.1 Suction Valve Kit, Head M, 6x8, PVDF, FP 025.1255.1 Suction Valve Kit, Head N, 6x8, PVDF, EP 025.1319.1 Suction Valve Kit, Head N, 6x8, PVDF, FP 025.1318.1 Suction Valve Kit, Head S or T, 8x12, PVDF, EP 025.1321.1 Suction Valve Kit, Head S or T, 8x12, PVDF, FP 025.1320.1 Discharge Valve Kit , Head L, 4x6, PVDF, EP 025.0907.1 Discharge Valve Kit , Head L, 4x6, PVDF, FP 025.0812.1 Discharge Valve Kit , Head M, 6x8 PVDF, EP 025.1258.1 Discharge Valve Kit , Head M, 6x8, PVDF, FP 025.1257.1 Discharge Valve Kit , Head N, 6x8 PVDF, EP 025.1325.1 Discharge Valve Kit , Head N, 6x8, PVDF, FP 025.1324.1 Discharge Valve Kit , Head S or T, 8x10, PVDF, EP 025.1331.1 Discharge Valve Kit , Head S or T, 8x10, PVDF, FP 025.1330.1 Diaphragm, Head L, PTFE 018.0033.0 Diaphragm, Head M, PTFE 018.0004.0 Diaphragm, Head N, PTFE 018.0022.0 Diaphragm, Head S, PTFE 018.0003.0 Diaphragm, Head T, PTFE 018.0045.0

EMEC—A SERIES DOSING HEAD

Section 22 - Page 8


Catalogue 2017

Section 23aSSeMblieS

23

CATALOGUE—2017

2017


INDEX

SECTION 23—ASSEMBLIES

ASSEMBLIES OVERVIEW PAGE 1

HOT INJECTION SET PAGE 2

CORROSION RACKS PAGE 3

UV STERILISER ASSEMBLY PAGE 4

WTC COOLING TOWER CONTROL PANEL PAGE 5

MTOWER COOLING TOWER CONTROL PANEL PAGE 6

2 WAY PH CONTROL PANEL PAGE 7

PROPORTIONAL DOSING SYSTEM PAGE 8



Catalogue 2017


23

CATALOGUE SECTION 23 — ASSEMBLIES



At Aqua Products Limited, we supply a number of custom assemblies, that are designed and constructed to meet our customers requirements. Many of these assemblies feature our customers proprietary designs, so we can’t include images in our catalogue. However we are pleased to provide a few examples of typical assemblies for your consideration. You can choose one of these proven designs, or we can design and build to your requirements on request.

ASSEMBLIES

Page 1 - Section 23


Catalogue 2017


23




EMEC has advised that their PVDF injection valves supplied standard with K, V, and A Series pumps, are suitable for use at up to 85 degrees C at 18 Bar, or up to 130 degrees C at 5 bar. Our recommendation, allowing for a margin of safety, is to use a hot injection set, in any installation with the potential to operate at above 100 degrees C, and for any installation operating above 85 degrees C under pressure.

HOT INJECTION SET

For injecting chemicals into hot pipelines or tanks.


FEATURES: RECOMMENDED FOR BOILER APPLICATIONS

AND FOR HOT TANKS ALLOWS FOR INSTALLATION INTO EITHER A

1/2” OR 1/4” BSP CONNECTION INJECTION QUILL TO DELIVER CHEMICAL INTO

THE CENTRE OF THE PIPEWORK ISOLATING VALVE, SO THAT THE INJECTION

VALVE CAN BE EASILY SERVICED/REPLACED WITHOUT PROCESS WATER SHUTDOWN

0.5 METERS OF 6MM SS PIPE PO DISSIPATE THE HEAT

ADAPTOR TO 6MM FLEXIBLE TUBING

Section 23 - Page 2


Catalogue 2017


23




CORROSION RACKS Corrosion racks hold corrosion coupons in a sample water

flow, to simulate the corrosion of similar metals in the system.

For Corrosion Coupons see section 20–Testing.

STANDARD FEATURES: HIGH QUALITY SCHEDULE 80 PVC CONSTRUCTION DOUBLE UNION ISOLATING BALL VALVES EASY TO USE UNION STYLE COUPON HOLDERS PVC BACK PLATE FOR EASY MOUNTING

OPTIONS: Standard version or Deluxe version (with flow meter). Alternative pipe materials. 2, 3 and 4 pass available standard. Custom builds on request. Flow switch on flowmeter.

Page 3 - Section 23


Catalogue 2017


23




UV IN A BOX

Greenway UV Steriliser Model GAUV20-HMA and Pre-Filters Mounted in an IP66 Box for outdoor use.

NSF55: Class A Compliant Meets the requirements of the NZ Drinking Water Standards UV Intensity Monitoring Event Logging Audible Alarm Lamp Life Timer Temperature Management Optional Shut Off Valve

Section 23 - Page 4


Catalogue 2017


23




WTC COOLING TOWER CONTROL PANEL

Conductivity control of cooling tower bleed. Timer control of dual biocide dosing, or Timer controlled biocide plus water meter control of inhibitor dosing. Timer output for control of an additional dosing pump. Alarm output.

CONSISTING OF: IP66 PLM ELECTRICAL ENCLOSURE WITH HINGED LID EMEC WTC CONTROLLER WITH DUAL PUMPS BUILT-IN EMEC MANIFOLD/3 CONTROL MANIFOLD KLD MOTORISED BLEED VALVE

FUNCTION:

Page 5 - Section 23


Catalogue 2017


23




MTOWER COOLING TOWER CONTROL PANEL

Conductivity control of cooling tower bleed. Timer control of dual biocide dosing. Water meter control of inhibitor dosing.

CONSISTING OF: IP66 PLM ELECTRICAL ENCLOSURE WITH HINGED LID EMEC MTOWER CD CONTROLLER EMEC MANIFOLD/3 CONTROL MANIFOLD KLD MOTORISED BLEED VALVE 2 X EMEC FPESR0002 PERISTALTIC DOSING PUMPS 1 X EMEC FPVM102.2EP METERING PUMP

FUNCTION:

OPTIONS: 4-20mA output signals Data-logging to USB Remote Monitoring and Management MODBUS

Section 23 - Page 6


Catalogue 2017


23




2 WAY PH CORRECTION SYSTEM

Continuous on line monitoring of pH. Acid and Alkaline dosing pumps for pH correction in either direction.

CONSISTING OF: IP66 PLM ELECTRICAL

ENCLOSURE WITH HINGED LID EMEC LDSPH PLUS PH

CONTROLLER FLOW METER WITH INTEGRAL

FLOW SWITCH EMEC VCO ACID PUMP EMEC VCO CAUSTIC PUMP SCHEDULE 80 PIPEWORK ISOLATING VALVES NON RETURN VALVE

FUNCTION:

OPTIONS: Automatic Temperature compensation. 4-20mA signal output. Datalogging to USB. Remote control by LAN connection. Remote control by GPRS. MODBUS.

Page 7 - Section 23


Catalogue 2017


23




PROPORTIONAL DOSING SYSTEM

The Proportional Dosing System injects chemical to achieve the same ratio of chemical to water, regardless of variations in flowrate.

CONSISTING OF: EMEC PULSE OUTPUT WATER METER EMEC CHEMICAL DOSING PUMP PIPEWORK IN SCHEDULE 80 PVC ISOLATING VALVES NON RETURN VALVE PVC BACKING BOARD

FUNCTION:

OPTIONS: Pipework and water meter sized to suit the flowrate. Materials of construction selected for Chemical compatibility. Pump capacity selected to suit application.

Section 23 - Page 8

Product Section Page No:



www.aquasales.co.nz

www.aquasales.co.nz

eMec — Dosing & Control Systems argal — Chemical Transfer Pumps Kld — Motorised Valves SaNKINg — Valves & Fittings ZYIa — Flowmeters delta — Water Softeners HM dIgItal — Meters ItS — Testing

9V Lovell Court Rosedale Auckland 0632PO Box 300 596 Albany Auckland 0752

09 281 [email protected]

Date post:	01-Oct-2020
Category:	Documents
Upload:	others
View:	0 times
Download:	0 times

Product catalogue - 2017€¦ · 09 281 1865 • [email protected] • Catalogue 2017 Section 1...

Documents