Product Catalogue 2018 - 2019Battens • Sail Hardware • Webbing & Velcro • Seaming & SewingAdhesives • Tapes & Luff Tapes • Components • FastenersSprayhood Fittings • Zippers • Cover Fabrics
ww
w.c
onte
nder
-tt.
com
Telephone: +31 (0)297 237575 • [email protected]
2 Addresses
Contender U.S.54 Front StreetFall River, Massachussetts 02721-4302United StatesPhone: (+1) 508 674 7700Fax: (+1) 508 674 [email protected]
Contender Australia4a Wilmette PlaceMona Vale N.S.W. 2103AustraliaPhone: (+61) 2 9997 4099Fax: (+61) 2 9997 [email protected]
Contender U.K.Unit 12b The IO CentreStephenson RoadSegensworth SouthFareham - HampshirePO 15 5 RUUnited KingdomPhone: (+44) 1329 849 036Fax: (+44) 1329 845 [email protected]
Contender France18 rue Jean RouxelZac de la Pentecôte44700 OrvaultFrancePhone: (+33) 240 637 313Fax: (+33) 240 635 [email protected]
Contender ItalyVia Aldo Moro, 2138062 Arco (TN)ItalyPhone: (+39) 0464 514 020Fax: (+39) 0464 514 [email protected]
Contender GermanyWendenstrasse 455D 20537 HamburgGermanyPhone: (+49) 40 2111 9722Fax: (+49) 40 2111 [email protected]
Contender New Zealand3/19 Hannigan DrivePanmure, Auckland 1072New ZealandPhone: (+64) 9 527 2123Fax: (+64) 9 527 [email protected]
Contender SpainC/Pep Ventura, 12 - Pol. Industrial Sud08440 Cardedeu(Barcelona)SpainPhone: (+34) 902 995 670Fax: (+34) 938 464 [email protected]
Contender SwedenJohannesfredsvägen 9cS-16869 BrommaSwedenPhone: (+46)8261820Fax: (+46) 8 [email protected]
Contender B.V.Nijverheidsweg 17A3641 RP MijdrechtThe Netherlands
P.O. Box 2093640 AE MijdrechtThe Netherlands
Chamber of Commerce: 30077741
Phone: +31 (0)297 237575Fax: +31 (0)297 281670www.contendersailcloth.comwww.contender-tt.cominfo@contender.nl
HEADOFFICE: CONTENDER NETHERLANDS
Product Catalogue 2018 - 2019 • Contender B.V.
3Table of contents
Battens 5
Sail Hardware 27
Webbing & Velcro 53
Seaming & Sewing 61
Adhesives 71
Tapes & Luff Tapes 75
Components 81
Fasteners 85
Zippers 103
Fabrics 109
Sprayhood Fittings 95
Terms of Trading 127
ww
w.c
onte
nder
-tt.
com
BATTENSBlueStreak • RBS • Roller Battens • Contract Battens Round Battens • Batten fittings
7
Product Catalogue 2018 - 2019 • Contender B.V.
Battens
THE BLUESTREAK® BATTEN RANGEOcean Racer/Cruiser Tapered Leech BattensA range of tapered battens designed with soft tips, starting with the OR1 and progressing in stiffness to the OR5. These battens are ideal for use as leech battens in mainsails and jibs.
Ocean Racer/Cruiser Tapered Full BattensA range of tapered battens designed with a drive point of 40%. These battens are suitable for full length top battens and fully battened mainsails.
Dinghy Tapered Leech BattensA range of 10 mm and 15 mm tapered battens designed with a soft tip. These battens are ideal to use as leech battens in mainsails and jibs for dinghies and smaller keelboats.
Un-tapered Contract CoilA complete range of 10 mm, 15 mm, 20 mm Ocean Racer 1 to 5 and 28 mm Amazon, profiles supplied in 15 meter coils. These are ideal to use as 50% top battens and also in fully battened mainsails.
RBS EPOXY BATTENSRBS E-GLASS battens are constructed using unidirectional pretensioned E-GLASS fibres impregnated with a specially formulated flexible epoxy resin. This unique combination produces an extremely durable, stiff and virtually unbreakable batten that can be tapered down to less than 1 mm creating an extremely soft tip.
RBS Battens: low weight – high stiffness – virtually unbreakable. Suitable for use in High Aspect jibs.
Index
8
Telephone: +31 (0)297 237575 • [email protected]
Battens
MAINSAIL BATTEN SELECTION GUIDEThis guide is not leading, only to give a direction to which batten to use on which boat.
FRACTIONAL RIG MASTHEAD RIG
BOATSIZE HARDNESS TYPE BLUE STREAK RBS HARDNESS TYPE BLUE STREAK RBS
25 ft. #1 15mm stiff HE15180 #1 15mm stiff HE15180
7.50 m #2 15mm x-stiff HE15230 #2 15mm x-stiff HE15230
#3 15mm x-stiff HE15265 #3 15mm x-stiff HE15265
#4 OR1 HE19230 #4 OR1 HE15300
#5 OR1 HE19230 #5 OR1 HE15300
30 ft. #1 OR1 HE19230 #1 OR1 HE15265
9 m #2 OR1 HE19230 #2 OR1 HE19230
#3 OR2 HE19265 #3 OR2 HE19265
#4 OR2 HE19300 #4 OR2 HE19265
#5 OR2 HE19300 #5 OR2 HE19265
35 ft. #1 OR1 HE19230 #1 OR1 HE19230
10.50 m #2 OR2 HE19265 #2 OR2 HE19265
#3 OR3 HE19300 #3 OR3 HE19265
#4 OR3 HE19350 #4 OR3 HE19300
#5 OR3 HE19350 #5 OR3 HE19300
40 ft. #1 OR2 HE19265 #1 OR1 HE19230
12 m #2 OR2 HE19300 #2 OR2 HE19265
#3 OR3 HE19350 #3 OR3 HE19300
#4 OR4 HE19350 #4 OR4 HE19300
#5 OR4 HE19350 #5 OR4 HE19300
45 ft. #1 OR2 HE19265 #1 OR1 HE19265
15 m #2 OR3 HE19300 #2 OR2 HE19300
#3 OR4 HE19350 #3 OR3 HE19300
#4 OR5 HE19400 #4 OR4 HE19350
#5 OR5 HE19400 #5 OR4 HE19350
50 ft. #1 OR2 HE19300 #1 OR2 HE19265
17 m #2 OR3 HE19350 #2 OR3 HE19300
#3 OR4 HE19400 #3 OR4 HE19350
#4 OR5 HE19400 #4 OR4 HE19400
#5 OR5 HE19400 #5 OR4 HE19400
Index
9
Product Catalogue 2018 - 2019 • Contender B.V.
Battens
BATTEN CONVERSION TABLE
BLUESTREAK RBS EPOXY
- Offshore Inshore - Grand Prix
HEX 1 - 10 x 3.0 mm light HE10120 - 10 x 3.0 mm
HEX 2 - 10 x 5.0 mm medium HE10180 - 10 x 4.6 mm
WR2 - 15 x 4.8 mm stiff HE15180 - 15 x 4.6 mm HE10230 - 10 x 5.8 mm
WR3 15 x 6.5 mm x-stiff HE15265 - 15 x 6.7 mm
OR 1 - 20 x 6.0 mm HE19230 - 19 x 5.5 mm HE15265 - 15 x 6.7 mm
OR 2 - 20 x 8.0 mm HE19300 - 19 x 7.6 mm
OR 3 - 20 x 9.0 mm HE19350 - 19 x 8.9 mm
OR 4 - 20 x 10.0 mm HE19400 - 19 x 10.2 mm
OR 5 - 20 x 12.0 mm HE25400 - 25 x 10.2 mm *
Amazon - 28 x 13.0 mm HE25500 - 25 x 12.7 mm *
* Non-catalog references, consult us
Index
10
Telephone: +31 (0)297 237575 • [email protected]
Battens
BLUESTREAK® TAPERED LEECH BATTENS
LENGTH 20 MM X 6 MM 20 MM X 8 MM 20 MM X 9 MM 20 MM X 10 MM 20 MM X 12 MM
750 mm HP0750OR1 HP0750OR2 – – –
900 mm HP0900OR1 HP0900OR2 – – –
1050 mm HP1050OR1 HP1050OR2 HP1050OR3 – –
1250 mm HP1250OR1 HP1250OR2 HP1250OR3 HP1250OR4 –
1500 mm HP1500OR1 HP1500OR2 HP1500OR3 HP1500OR4 HP1500OR5
1800 mm HP1800OR1 HP1800OR2 HP1800OR3 HP1800OR4 HP1800OR5
2100 mm HP2100OR1 HP2100OR2 HP2100OR3 HP2100OR4 HP2100OR5
2400 mm – HP2400OR2 HP2400OR3 HP2400OR4 HP2400OR5
2700 mm – HP2700OR2 HP2700OR3 HP2700OR4 HP2700OR5
PART NO.
HP0750OR1
HP0900OR1
HP1050OR1
HP1250OR1
HP1500OR1
HP1800OR1
HP2100OR1
HP0750OR2
HP0900OR2
HP1050OR2
HP1250OR2
HP1500OR2
HP1800OR2
HP2100OR2
HP2400OR2
HP2700OR2
PART NO.
HP1050OR3
HP1250OR3
HP1500OR3
HP1800OR3
HP2100OR3
HP2400OR3
HP2700OR3
HP1250OR4
HP1500OR4
HP1800OR4
HP2100OR4
HP2400OR4
HP2700OR4
HP1500OR5
HP1800OR5
HP2100OR5
HP2400OR5
HP2700OR5
OR 1 OR 2 OR 4OR 3 OR 5
Index
11
Product Catalogue 2018 - 2019 • Contender B.V.
Battens
BLUESTREAK® TAPERED FULL BATTENS 20 MM
LENGTH 20 MM X 6 MM 20 MM X 8 MM 20 MM X 9 MM 20 MM X 10 MM 20 MM X 12 MM
1200 mm HPF1200OR1 HPF1200 0R2 HPF1200OR3 – –
1500 mm HPF1500OR1 HPF1500OR2 HPF1500OR3 – –
1800 mm HPF1800OR1 HPF1800OR2 HPF1800OR3 – –
2100 mm HPF2100OR1 HPF2100OR2 HPF2100OR3 – –
2400 mm HPF2400OR1 HPF2400OR2 HPF2400OR3 HPF2400OR4 –
2700 mm – HPF2700OR2 HPF2700OR3 HPF2700OR4 –
3000 mm – – HPF3000OR3 – –
3600 mm – – HPF3600OR3 HPF3600OR4 –
4200 mm – – HPF4200OR3 HPF4200OR4 HPF4200OR5
5000 mm – – – – HPF5000OR5
6000 mm – – – – HPF6000OR5
PART NO.
HPF1200OR1
HPF1500OR1
HPF1800OR1
HPF2100OR1
HPF2400OR1
HPF1200OR2
HPF1500OR2
HPF1800OR2
HPF2100OR2
HPF2400OR2
HPF2700OR2
PART NO.
HPF1200OR3
HPF1500OR3
HPF1800OR3
HPF2100OR3
HPF2400OR3
HPF2700OR3
HPF3000OR3
HPF3600OR3
HPF4200OR3
HPF2400OR4
HPF2700OR4
HPF3600OR4
HPF4200OR4
HPF6000OR4
HPF4200OR5
HPF5000OR5
HPF6000OR5
OR 1 OR 2 OR 4OR 3 OR 5
Index
12
Telephone: +31 (0)297 237575 • [email protected]
Battens
BLUESTREAK® TAPERED DINGHY BATTENS
LENGTH LIGHT 10X3 MM
MEDIUM 10X5 MM
STIFF 15X4.8 MM
X-STIFF 15X6.5 MM
450 mm HPD0450L HPD0450M – –
600 mm HPD0600L HPD0600M HPD0600S –
750 mm HPD0750L HPD0750M HPD0750S HPD0750X
800 mm HPD0800L HPD0800M HPD0800S HPD0800X
900 mm HPD0900L HPD0900M HPD0900S HPD0900X
1050 mm HPD1050L HPD1050M HPD1050S HPD1050X
1200 mm – HPD1200M HPD1200S HPD1200X
1350 mm – HPD1350M HPD1350S HPD1350X
1500 mm – – HPD1500S HPD1500X
PART NO.
HPD0450L
HPD0600L
HPD0750L
HPD0800L
HPD0900L
HPD1050L
HPD0450M
HPD0600M
HPD0750M
HPD0800M
HPD0900M
HPD1050M
HPD1200M
HPD1350M
PART NO.
HPD0600S
HPD0750S
HPD0800S
HPD0900S
HPD1050S
HPD1200S
HPD1350S
HPD1500S
HPD0600X
HPD0750X
HPD0800X
HPD0900X
HPD1050X
HPD1200X
HPD1350X
HPD1500X
Index
13
Product Catalogue 2018 - 2019 • Contender B.V.
Battens
BLUESTREAK® UNTAPERED COILS15 m coils
PART. NO. TYPE THICKNESS MM
HPCWRSTIFF STIFF 15 mm 4.8
HPCWRXTST X STIFF 15 mm 6.5
HPCOR1 OR1 20 mm 6.0
HPCOR2 OR2 20 mm 8.0
HPCOR3 OR3 20 mm 9.0
HPCOR4 OR4 20 mm 10.0
HPCOR5 OR5 20 mm 12.0
HPCAMAZON AMAZON 28 mm 13.0
ENDCAPS FOR BLUESTREAK®
PART NO. TYPE
HPE10C 10 mm dinghy batten crescent
HPE10T 10 mm dinghy batten tie-in
HPET15TT 15 mm dinghy batten triangle
HPE15BLANK 15 mm dinghy batten blank
HPE20TRIINN 20 mm inner
HPE20BLANK 20 mm blank
HPEOUTOR1 20 mm outer OR1
HPEOUTOR2 20 mm outer OR2-3
HPEOUTOR4 20 mm outer OR4
HPEOUTOR5 20 mm outer OR5
HPEAMA Endcap Amazon batten
15/20 mm blank
15 mm triangle 20 mm triangle inner 20 mm triangle outer
10 mm crescent 10 mm tie-in
Index
14
Telephone: +31 (0)297 237575 • [email protected]
Battens
RBS EPOXY LEECH BATTENS (FLEX)
LENGTH HE10120 HE10140 HE10160 HE10180 HE10230 HE15180 HE15230
EI# 1,2 1,7 2,3 3,1 6,8 4,8 9,7
450 mm HE10120-045 – – – – – –
600 mm HE10120-060 – – HE10180-060 – – –
750 mm HE10120-075 – – HE10180-075 HE10230-075 – –
900 mm HE10120-090 HE10140-090 – HE10180-090 HE10230-090 HE15180-090 HE15230-090
1050 mm – – HE10160-105 HE10180-105 HE10230-105 HE15180-105 HE15230-105
1250 mm – – – HE10180-125 HE10230-125 HE15180-125 HE15230-125
1350 mm – – – – – HE15180-135 HE15230-135
1500 mm – – – – HE10230-150 HE15180-150 HE15230-150
1800 mm – – – – HE10230-180 – HE15230-180
The number EI corresponds to a measure of stiffness of the batten, it is obtained by a method internal to RBS and makes it possible to compare the stiffness between the battens.
PART NO.
HE10120
HE10120-045
HE10120-060
HE10120-075
HE10120-090
HE10140
HE10140-090
HE10160
HE10160-105
HE10180
HE10180-060
HE10180-075
HE10180-090
HE10180-105
HE10180-125
HE10230
HE10230-075
HE10230-090
HE10230-105
HE10230-125
HE10230-150
HE10230-180
PART NO.
HE15180
HE15180-090
HE15180-105
HE15180-125
HE15180-135
HE15180-150
HE15230
HE15230-090
HE15230-105
HE15230-125
HE15230-135
HE15230-150
HE15230-180
HE10120
10 x 3.10 mm
HE10140
10 x 3.6 mm
HE10160
10 x 4.1 mm
HE10180
10 x 4.6 mm
HE10230
10 x 5.8 mm
HE15180
15 x 4.6 mm
HE15230
15 x 5.8 mm
Index
15
Product Catalogue 2018 - 2019 • Contender B.V.
Battens
RBS EPOXY LEECH BATTENS (FLEX)
LENGTH HE15265 HE15300 HE19230 HE19265 HE19300 HE19350
EI# 14,7 21,1 11,4 17,9 26 42
900 mm HE15265-090 – – – – –
1050 mm HE15265-105 HE15300-105 – – – –
1250 mm HE15265-125 HE15300-125 HE19230-125 HE19265-125 HE19300-125 –
1350 mm HE15265-135 – – – – –
1500 mm HE15265-150 HE15300-150 HE19230-150 HE19265-150 HE19300-150 HE19350-150
1800 mm HE15265-180 HE15300-180 HE19230-180 HE19265-180 HE19300-180 HE19350-180
2100 mm – – HE19230-210 HE19265-210 HE19300-210 HE19350-210
2400 mm – – – HE19265-240 HE19300-240 HE19350-240
2740 mm – – – HE19265-274 HE19300-274 HE19350-274
3000 mm – – – – HE19300-300 –
3600 mm – – – – HE19300-360 –
The number EI corresponds to a measure of stiffness of the batten, it is obtained by a method internal to RBS and makes it possible to compare the stiffness between the battens.
PART NO.
HE15265
HE15265-090
HE15265-105
HE15265-125
HE15265-135
HE15265-150
HE15265-180
HE15300
HE15300-105
HE15300-125
HE15300-150
HE15300-180
HE19230
HE19230-125
HE19230-150
HE19230-180
HE19230-210
HE19265
HE19265-125
HE19265-150
HE19265-180
HE19265-210
HE19265-240
HE19265-274
PART NO.
HE19300
HE19300-125
HE19300-150
HE19300-180
HE19300-210
HE19300-240
HE19300-274
HE19300-300
HE19300-360
HE19350
HE19350-150
HE19350-180
HE19350-210
HE19350-240
HE19350-274
SPLICE (from 3000 mm)
HESPLICE
Extra sleeve for battens from 3000 mm
HE15265
15 x 6.7 mm
HE15300
15 x 5.1 mm
HE19230
19 x 5.8 mm
HE19265
19 x 6.7 mm
HE19300
19 x 7.6 mm
HE19350
19 x 8.9 mm
Index
16
Telephone: +31 (0)297 237575 • [email protected]
Battens
RBS EPOXY FULL BATTENS (COMPRESSION)
LENGTH HE10120 HE10140 HE10160 HE10180 HE10230 HE15180 HE15230
EI # 1,2 1,7 2,3 3,1 6,8 4,8 9,7
450 mm – – – –HE10230-
045C– –
600 mm – – – –HE10230-
060C– –
750 mm – – – –HE10230-
075C– –
900 mm – – – –HE10230-
090C– –
1050 mmHE10120-
105CHE10140-
105CHE10160-
105CHE10180-
105C–
HE15180-105C
HE15230- 105C
1250 mm – – –HE10180-
125C–
HE15180-125C
HE15230- 125C
1350 mm – – – – –HE15180-
135CHE15230-
135C
1500 mm – – – – –HE15180-
150CHE15180-
150C
1800 mm – – – –HE10230-
180CHE15180-
180CHE15180-
180C
The number EI corresponds to a measure of stiffness of the batten, it is obtained by a method internal to RBS and makes it possible to compare the stiffness between the battens.
PART NO.
HE10120
HE10120-105C
HE10140
HE10140-105C
HE10160
HE10160-105C
HE10180
HE10180-105C
HE10180-125C
HE10230
HE10230-045C
HE10230-060C
HE10230-075C
HE10230-090C
HE10230-180C
PART NO.
HE15180
HE15180-105C
HE15180-125C
HE15180-135C
HE15180-150C
HE15180-180C
HE15230
HE15230-105C
HE15230-125C
HE15230-135C
HE15230-150C
HE15230-180C
RBS splice
system
HE10120
10 x 3.10 mm
HE10140
10 x 3.6 mm
HE10160
10 x 4.1 mm
HE10180
10 x 4.6 mm
HE10230
10 x 5.8 mm
HE15180
15 x 4.6 mm
HE15230
15 x 5.8 mm
Index
17
Product Catalogue 2018 - 2019 • Contender B.V.
Battens
RBS EPOXY FULL BATTENS (COMPRESSION)
LENGTH HE15265 HE15300 HE19230 HE19265 HE19300 HE19350
EI # 14,7 21,1 11,4 17,9 26 42
1250 mm – – HE19230-125C HE19265-125C – –
1350 mm – – – – – –
1500 mm – HE15300-150C HE19230-150C HE19265-150C – –
1800 mm HE15265-180C HE15300-180C HE19230-180C HE19265-180C – –
2100 mm – HE15300-210C HE19230-210C HE19265-210C – –
2400 mm – – – – HE19300-240C –
2740 mm – – – HE19265-274C HE19300-274C –
3000 mm – – – – HE19300-300C* HE19350-300C*
3600 mm – – – – HE19300-360C* HE19350-360C*
5000 mm – – – – – HE19350-500C*
The number EI corresponds to a measure of stiffness of the batten, it is obtained by a method internal to RBS and makes it possible to compare the stiffness between the battens.
*To facilitate transport and storage, these references are delivered because of their length with a connection sleeve. This one will be invoiced in addition, ref, HESPLICE
PART NO.
HE15265
HE15265-180C
HE15300
HE15300-150C
HE15300-180C
HE15300-210C
HE19230
HE19230-125C
HE19230-150C
HE19230-180C
HE19230-210C
HE19265
HE19265-125C
HE19265-150C
HE19265-180C
HE19265-210C
HE19265-274C
PART NO.
HE19300
HE19300-240C
HE19300-274C
HE19300-300C*
HE19300-360C*
HE19350
HE19350-300C*
HE19350-360C*
HE19350-500C*
HESPLICE
HESPLICE
HE15265
15 x 6.7 mm
HE15300
15 x 5.1 mm
HE19230
19 x 5.8 mm
HE19265
19 x 6.7 mm
HE19300
19 x 7.6 mm
HE19350
19 x 8.9 mm
Index
18
Telephone: +31 (0)297 237575 • [email protected]
Battens
RBS HOLE END CAP
PART NO. FOR RBS BATTEN
HECH10265 10120 - 10265
HECH15230 15180 - 15230
HECH15300 15265 - 15300
HECH19265 19230 - 19265
HECH19350 19300 - 19350
RBS ROCKET BATTEN TENSIONER
PART NO. BATTEN SIZE - PART. NO.
HEBT10x5.0 HE10120-XX - HE10230-XX*
HEBT15X7.6 HE15180-WW - HE15265-XX
HEBT19X6.7 HE19230-XX - HE19265-XX
HEBT19X8.9 HE19300-XX - HE19350-XX
HEBTKEY Adjustment wrench 10x5.0
OUTER END CAPS FOR RBS BATTENS
PART NO. FOR RBS BATTEN
HEC10140 HE10120-XX and HE10140-XX
HEC10180 HE10160-XX and HE10180-XX
HEC10200 HEC10200-XX
HEC15180 HEC15180-XX
HEC15230 HEC15230-XX
HEC15265 HEC15265-XX
HEC15300 HEC15300-XX
HEC19230 HEC19230-XX
HEC19265 HEC19265-XX
HEC19300 HEC19300-XX
HEC19350 HEC19350-XX
Index
19
Product Catalogue 2018 - 2019 • Contender B.V.
Battens
ROLLER BATTENHalf stainless steel battens covered with a polyester strap.
PART NO. PRODUCT DESCRIPTION
WIDTH MM
LENGTH MM
WEIGHT GR
RECOMMENDED BOATSIZE
HR3140-030 single 40 300 53 <32ft
HR3141-030R reinforced 40 300 85 <40ft
HR3140-040 single 40 400 70 <32ft
HR3141-040R reinforced 40 400 112 <40ft
HR3140-050 single 40 500 98 <32ft
HR3141-050R reinforced 40 500 140 <40ft
HR3141-060R reinforced 40 600 163 <40ft
HR3150-050 single 50 500 118 30-40ft
HR3151-050R reinforced 50 500 190 40-50ft
HR3150-060 single 50 600 145 30-40ft
HR3151-060R reinforced 50 600 230 40-50ft
HR3150-070 single 50 700 166 30-40ft
HR3151-070R reinforced 50 700 265 40-50ft
HR3170-070 singel 70 700 235 >37ft
HR3170-080 singel 70 800 270 >37ft
HR3170-090 singel 70 900 290 >37ft
Rutgerson Roller Battens are established and wide spread as a solution to furling sails world-wide. The product was originally an innovation from Rutgerson and there is today an extensive range of sizes. The roller batten rolls up smoothly on the furling system and allows the boat owner to us e a roller furl cover. It can also be used in furling mainsails.
There are two versions, standard and reinforced. The reinforced battens will be indicated with an ”R”. The core consists of two curved battens made of Swedish stainless steel and the reinforced version has four curved battens for a stronger and stiffer result. Stainless steel is the optimal material for this purpose but like all materials, it has a limit. The material allows the batten to bend but if the product is used incorrectly and the batten is bent to a radius smaller than of approximately 50mm, the product cannot recover and it will be permanently bent.
Make sure not to bend the batten to a radius smaller than 50mm.
Index
20
Telephone: +31 (0)297 237575 • [email protected]
Battens
STAINLESS STEEL ENDCAPS FOR VERTICAL ROUND BATTENSThese end caps are available in a range of lengths and are made of stainless, acid proof steel and are supposed to be used together with the Batten connectors. NOTE: Both 1545-XX and 1547-XX are supposed to be bonded to the batten with Araldit 2045 or similar.
DIMENSIONS (MM)
PART NO. Ø LENGTH A LENGTH B OUTER Ø B
HR1545-0657 6 mm 57 97 8
HR1545-08150 8 mm 150 250 8
HR1545-0857 8 mm 57 97 10
HR1545-0885 8 mm 85 125 10
HR1545-10150 10 mm 150 250 12
HR1545-1057 10 mm 57 97 12
BATTEN CONNECTORS STAINLESS STEEL, DIVIDEDRutgerson has introduced the first manufactured connector for round battens. It is made of stainless, acid proof steel. Joins battens of identical diameter. Especially suited for vertical battens in roller furl mainsails. The refined designs facilitate the connector to enter the roller furl mainsail. The connector is strong and easy to separate. The parts are glued upon the batten ends with Araldit 2015.
PART NO. FOR BATTEN OUTER Ø MM LENGTH MM PACKED QTY
HR1547-06 6 8 200 10
HR1547-08 8 10 200 10
HR1547-10 10 12 200 10
BATTEN CONNECTORS, ALUMINIUM Special anodized aluminium connectors for use with round battens. Allows the joining of round battens of identical, or different diameters to form a tapered effect. Lock the batten into the connectors using double sided tape.
PART NO. CONNECT BATTEN Ø MM PACKED QTY
HR1548 - 0406 4 and 6 10
HR1548 - 0608 6 and 8 10
HR1548 - 0810 8 and 10 10
HR1548 - 1013 10 and 13 10
HR1548 - 0606 6 10
HR1548 - 0808 8 10
HR1548 - 1010 10 10
HR1548 - 1313 13 10
HR1548 - 1616 16 10
Index
21
Product Catalogue 2018 - 2019 • Contender B.V.
Battens
ROUND SAIL BATTENSUntapered stock battens in glass fibre plastic, colour white. Cannot be shipped rolled!
PART NO. LENGTH Ø MM SUITABLE ENDCAPS
HFL8806 6000 mm 6 HMB 8106
HFL8808 6000 mm 8 HMB 8108
HFL8810 6000 mm 10 HMB 8110
HFL8812 6000 mm 12 HMB 8112
HFL8816 6000 mm 16 HMB 8116
WHITE END CAPS FOR ROUND BATTENS, PVC
PART NO. Ø MM PACKED QTY
HMB8106-1 6 100
HMB8108-1 8 100
HMB8110-1 10 100
HMB8112 12 10
HMB8116 16 10
Index
22
Telephone: +31 (0)297 237575 • [email protected]
Battens
GLASS FIBER UNTAPERED YELLOW BATTENSUntapered stock battens in glass fibre plastic, colour yellow, coated
PART NO. LENGTH WIDTH & THICKNESS SUITABLE ENDCAPS
HMB8216-5 5000 mm 16 x 2.0 mm HMB 8016
HMB8316-5 5000 mm 16 x 3.0 mm HMB 8016
HMB8324-5 5000 mm 24 x 3.0 mm HMB 8024
HMB8332-5 5000 mm 32 x 3.0 mm HMB 8032
HMB8424-5 5000 mm 24 x 4.0 mm HMB 8040
HMB8440-5 5000 mm 40 x 4.0 mm HMB 8040
HMB8448-5 5000 mm 48 x 4.0 mm HMB 8048
BLUE ENDCAPS, PVC
PART NO. WIDTH MM PACKED QTY
HMB8016 16 10
HMB8018 18 10
HMB8024 24 10
HMB8032 32 10
HMB8040 40 10
HMB8048-1 48 100
NEW
Index
23
Product Catalogue 2018 - 2019 • Contender B.V.
Battens
BATTEN POCKET PROTECTORS
PART NO. MAX. DEPTH MM WIDTH MM PACKED QTY
HHA151 4.5 35 1
HHA51 14 27 1
HHA351 18 40 10
HHA451 15 25 10
HHD6612 21 35 1
HHD6614 24 50 1
HHB3290 25 47 10
HHA851 22 40 10
BATTEN RECEPTACLES AND CONNECTOR
PART NO. DESCRIPTION
HHA419S Non Adjustable, 40 x 6 mm, 16 mm round, M10
HHA419L Non Adjustable, 53 x 10 mm, 22 mm round, M10
HHA102 M10 stud only with toggle to suit slides for full batten sails
Batten Fitting HA419 with M10 stud HA 102
HA151 HA351 HB3290 HA51 HA451 HD6612/14 HD851
Index
24
Telephone: +31 (0)297 237575 • [email protected]
Battens
1490
1590
1596
1595
1580
1585
1490-1
NEW ADJUSTABLE BATTEN RECEPTACLE BANTAMThe batten receptacle Bantam 1600 has the same ingenious construction as the 1600 with the button function to open the lid, but it’s suitable up to approximately 55ft monohull and 40ft multihull, depending on the batten stiffness. The batten receptacle 1600 range is completely unique on the global marine market due to a snap function, which means that no tools are required to remove the sliding lid. With the snap function-innovation the batten receptacle becomes very user-friendly to sailors, which in turn makes sailing more effortless.
NEW
Index
25
Product Catalogue 2018 - 2019 • Contender B.V.
Battens
BATTEN RECEPTACLESThe Rutgerson full batten receptacle range sets the standard for quality, durability, easy handling and performance. The fittings are made of a very light and extremely durable composite material with very high UV-resistance.
PART NO. LENGHT MM WIDTH MM
WEIGHT MM MAX. DIMENSION
BOAT LENGHT FT.
CORRESPONDING SLIDES
HR1490 83 63 63 (45)* ø12, 45 40
HR1525-XX, HR1526-XX, (HR1530-XX15, HR1535-XX15)*, (HR1531-XX15,
HR1536-XX15)*
HR1490-1B (Black)
83 63 63 (45)* ø12, 45 40
HR1525-XX, HR1526-XX, (HR1530-XX15, HR1535-XX15)*, (HR1531-XX15,
HR1536-XX15)*
HR1490-1G (Grey)
83 63 63 (45)* ø12, 45 40
HR1525-XX, HR1526-XX, (HR1530-XX15, HR1535-XX15)*, (HR1531-XX15,
HR1536-XX15)*
HR1580 110 49 120ø10, 20 x 4,
30 x 6, 20 x 1025 - 36 HR153X-XX05
HR1585 125 57 140 ø10, 25 x 10 28 - 32 HR153X-XX05
HR1590 145 78 185 40 x 6 35 - 50 HR153X-XX05
HR1595 145 78 221 25 x 10 35 - 50 HR153X-XX05
HR1596 145 78 220 ø10 - 12 35 - 50 HR153X-XX05
*Note: case previously cut out at the nose and shackle removed.
LIMOUSINE BIG BOAT BATTEN RECEPTACLEThe Rutgerson 1600 Bantam and Limousine batten receptacle are machined from solid aluminium and anodized black. They are filling the gap in the boat segment for applications from 35' until 60' in length. The battens are front loading via the unique quick release cover plate that can be removed without tools. Bantam and limousine are each available in both M10 and M12 thread sizes.
PART NO. PRODUCT DESCRIPTION
LENGTH MM WIDTH MM MAX SIZE FLAT BATTEN MM
MAX ROUND BATTEN MM
WEIGHT MM
HR1601 Bantam M10 128 55 25 x 10 16 294
HR1602 Bantam M12 128 55 25 x 10 16 294
HR1610 Limousine M10 153 67 34 x 14 22 475
HR1612 Limousine M12 153 67 34 x 14 22 475
NEW
Index
ww
w.c
onte
nder
-tt.
com
Sail HardwarePress Rings • Headboards and Clewboards • BattcarsSlides and Shackles • Cleats • Rings • Hanks
29
Product Catalogue 2018 - 2019 • Contender B.V.
Sail Hardware
SUPER RINGS RUTGERSONThe SR-rings are made of high grade stainless steel. They are light, strong, thin and corrosion resistant. Easy to install or remove, reliable and competitively priced. Rutgerson Super Rings are the benchmark for sailmaking rings and used by the majority of sailmakers in the world today. The rings are made of three parts: toothed washer, centre piece and plastic insert. Remember, only Rutgerson rings have their own ingenious ring remover! DO NOT USE IN COMBINATION WITH CARBON FIBRE REINFORCED SAILCLOTH.
PART NO. Ø I MM
Ø O MM
HOLE PUNCH
MM
PRESS FORCE ON DIES APPROXIMATELY MAX. LOAD KG
APPLICATIONS PACKED QTY.
HR1000-10 10 23 11 By hand 150 - 250 Dinghies 100
HR1000-12 12 26 13 By hand 300 - 350 Dinghies 100
HR1000-14 14 28 15 3 - 5 ton / By hand 350 - 500 Little cruisers 100
HR1000-14LD 14 28 15 3 - 5 ton / By hand 350 - 500 Industrial 100
HR1000-20 20 40 22 11 - 13 ton 700 - 1500 Boats 25 to 30 feet 100
HR1000-20LD 20 40 22 11 - 13 ton 600 - 1125 Front and Spinnaker sails 100
HR1000-25 25 46 28 15 ton 1000 - 1600 Boats 28 to 32 feet 100
HR1000-25LD 25 46 28 15 ton 750 - 1300 Spinnaker 100
HR1000-35 35 58 38 22 ton 1455 - 2045 Boats 30 to 36 feet 50
HR1000-45 47 72 48 25 ton 2000 - 2500 Boats 34 to 46 feet 50
HR1000-55 55 86 60 25 ton (1st) 30 ton (2nd) 2800 - 3200 Boats 46 to 80 feet 10
Index
30
Telephone: +31 (0)297 237575 • [email protected]
Sail Hardware
HOLE PUNCHERS
PART NO. FOR RING NO HOLE Ø MM
HLO05 Grommet 000 5
HLO06 Grommet 00 6
HLO08 Grommet 0 8
HLO09 Grommet 0 9
HR1060-11 SR - 10 11
HR1060-13 SR - 12 13
HR1060-15 SR - 14 15
HR1060-22 SR - 20 22
HR1060-28 SR - 25 28
HR1060-38 SR - 35 38
HR1060-48 SR - 45 48
HR1060-60 SR - 55 60
HHY1 cutting pad 350 x 350 x 25 mm
SUPER RING PRESS TOOLSThe press tools for SR10 and SR12 are suitable for hand hammering operations. The SR14 can be applied manually or in combination with a hydraulic press. All other types should only be applied with a hydraulic press. The SR55 requires a two-step process. Step 1 for the correct allignment and step 2 for the fixation. The press tool is a three piece tool (see drawing).
PART NO. FOR SR-RING PRESS FORCE ON DIES
HR1030-10 # 10 by hand
HR1030-12 # 12 by hand
HR1030-14 # 14 3-5 ton / by hand
HR1030-20 # 20 11-13 ton
HR1030-25 # 25 15 ton
HR1030-35 # 35 22 ton
HR1030-45 # 45 25 ton
HR1030-55 # 55 25 ton (1st) 25 ton (2nd)
Upper die
Toothed
washer
Cloth
Plasticwasher
Centerpiece
Lower die
HY1
Index
31
Product Catalogue 2018 - 2019 • Contender B.V.
Sail Hardware
SUPER RING REMOVER TOOLSQuickly presses rings from the sail without damaging or weakening the structural integrity of the sailcloth, and makes it possible to fit a new ring in the same hole, with the same strength.
PART NO. REF # FOR SR-RING
HR1040-14 RP14 # 14
HR1040-20 RP20 # 20
HR1040-25 RP25 # 25
HR1040-35 RP35 # 35
HR1040-45 RP45 # 45
HR1040-55 RP55 # 55
SPUR TOOTHED GROMMETS NICKEL AND TOOLS
PART NO. SIZE PACKED QTY ØI MM PART. NO TOOL
HGH68430 000 1000 4 HGH6930
HGH68420 00 1000 5 HGH6920
HGN0 Stimpson 0 144 8 HGT0
HGN1 Stimpson 1 144 11 HGT1
HGN2 Stimpson 2 144 12 HGT2
HGN3 Stimpson 3 144 14 HGT3
HGN4 Stimpson 4 144 17 HGT4
HGN5 Stimpson 5 144 19 HGT5
HGN6 Stimpson 6 144 21
A
C
B
Place the pressed ring on Lower Die (B) with the teethed washer
on top and the rolled liner washer on the bottom, seated in the
Lower Die (B).
Place the Punch (A) over the guide post with Cutting Edge
down on top of the ring. The Cutting Edge is recognized by
its “ concave” shape.
Press untill the bottom of the ring has sheared completely free of
the toothed ring or untill the bottom of the red band on the punch
has been reached.
To remove the remaining toothed washer, place the
patch on top of the support cup (C). Use a screwdriver
or something similar to remove the toothed washer.
Index
32
Telephone: +31 (0)297 237575 • [email protected]
Sail Hardware
MAINSAIL SYSTEM HEADBOARDSThe headboards are black anodized. They are easily attached to the headboard car. Please find the specifications in the card below.
PART NO. PRODUCT DESCRIPTION ASPECT RATIO THICKNESS MM WEIGHT VERTICAL SWL WEBBING SLOTS
HRA1 Standard A1 156 x 140 40 deg 4 120 g 850 kg 3 x 30 mm
HRA2 Square top A2 157 x 189 90 deg 4 160 g 850 kg 5 x 30 mm
HRB1 Standard B1 217 x 194 40 deg 6 295 g 1350 kg 4 x 30 mm
HRB2 Square top B2 218 x 246 90 deg 6 350 g 1350 kg 5 x 30 mm
HRC1 Standard C1 180 x 199 40 deg 10 485 g 2800 kg 3 x 40 mm
HRC2 Square top C2 180 x 237 90 deg 10 600 g 2200 kg 4 x 40 mm
Monohull headboard A1
Multihull and fat headboard A2
Monohull headboard B1
Multihull and fat headboard B2
Monohull headboard C1
Multihull and fat headboard C2
For price information of the car system; see page 38
SYSTEM A SYSTEM B SYSTEM C
156 m
m
157 m
m
217 m
m
218 m
m
180 m
m
180 m
m
140 mm
189mm
194 mm
246 mm
199 mm
237 mm
Index
33
Product Catalogue 2018 - 2019 • Contender B.V.
Sail Hardware
QUICK FLEX FITTING HEADBOARDS, FOR LINER FASTENINGThe QFF headboard are available in a wide range of sizes to cover the required range of mainsails for boats up to approximately 50ft. Available in both black and silver 25μm anodized aluminium, this standard fitting only requires liners and no additional rivets. This makes the assembly of the boards quick and easy, which saves valuable time in sailmakers production by being more efficient. As all boards can be turned to make any straight side the vertical top side, this product will also decrease product variances in stock. Webbing to add strength and/or spreading loads can be applied through the liners if necessary.
PART NO. PRODUCT DIMENSIONS COLOUR LINERS REQUIRED MM
HR1115-070S 115 x 080 x 2 mm Silver 3 x 19
HR1115-070B 115 x 080 x 2 mm Black 3 x 19
HR1115-115S 151 x 115 x 3 mm Silver 3 x 19
HR1115-115B 151 x 115 x 3 mm Black 3 x 19
HR1115-121S 160 x 135 x 3 mm Silver 3 x 19
HR1115-121B 160 x 135 x 3 mm Black 3 x 19
HR1115-150S 175 x 150 x 3 mm Silver 4 x 19
HR1115-150B 175 x 150 x 3 mm Black 4 x 19
HR1115-175S 215 x 185 x 3 mm Silver 4 x 19
HR1115-175B 215 x 185 x 3 mm Black 4 x 19
1115-070
1115-150
1115-115
1115-175
1115-121
Index
34
Telephone: +31 (0)297 237575 • [email protected]
Sail Hardware
ONE DESIGN HEADBOARDSThese headboards are suitable for the majority of One Designs, 1102-113 has webbing slots for extra strong attachments in the sail.
PART NO. A MM B MM THICKNESS MM LINERS PCS MM
HR1102-112 112 140 2 1 x 19
HR1102-113 112 140 2 3 x 19
HEAVY DUTY HEADBOARDSThese heavy duty headboards are designed to avoid the headboard from hooking on the backstay and/or Lazy Jack lines when hoisting.
PART NO. A MM B MM C MM THICKNESS MM
LINERS PCS MM
HR1120-125 125 140 150 2.5 4 x 19
HR1120-170 170 195 205 3.0 4 x 19
HR1120-210 210 230 245 4.0 5 x 19
COMPOSITE HEADBOARDSThe FFC Flex Fitting Composite headboard is available in a wide range of sizes and thicknesses, and is a cost efficient solution for dinghy and One-Design applications. These headboards are made in a strong polyamide composite material. All headboards have 5 mm rivet holes. DO NOT PUT TO MUCH PRESSURE ON THE LINERS WHEN PRESSING!!
PART NO. DIMENSION A MM DIMENSION B MM THICKNESS MM LINERS MM
HR1104-90 70 90 2 1 x 14
HR1105-90 70 90 2 1 x 14
HR1105-115 100 115 3 3 x 14
HR1105-135 115 135 4 3 x 19
ALUMINIUM HEADBOARDSThe two larger sizes have webbing slots for extra strong attachments in the sail. There is a webbing slot along the luff-side to make it possible to “web on”.
PART NO. A MM B MM THICKNESS MM LINERS PCS MM
HR1102-075 75 103 2 1 x 19
HR1102-090 90 120 2 1 x 19
HR1102-115 115 162 2 1 x 19
HR1102-135 135 185 2 1 x 19
HR1103-135 135 185 3 1 x 19
HR1103-160 160 220 3 1 x 19
B
A
1105-115
A
B
1105-135
A
B
1104-0901105-090 (black)
Index
35
Product Catalogue 2018 - 2019 • Contender B.V.
Sail Hardware
QUICK FITTING CLEWBOARDS, FOR LINER FASTENINGThese clewboards are designed to quickly and easily attach to the sail using just 19 mm liners eliminating the time consuming task of installing rivets. Available in either silver or black in three different sizes.
PART NO. PRODUCT DESCRIPTION LENGHT MM WIDTH MM THICKNESS MM LINERS REQUIRED
HR1191-018S QFI Clewboard #3 Silver 183 45 3 5 x 19
HR1191-018B QFI Clewboard #3 Black 183 45 3 5 x 19
HR1191-025S QFI Clewboard #2 Silver 258 55 3 6 x 19
HR1191-025B QFI Clewboard #2 Black 258 55 3 6 x 19
HR1191-030S QFI Clewboard #1 Silver 305 60 4 7 x 19
HR1191-030B QFI Clewboard #1 Black 305 60 4 7 x 19
#3 1191 - 18x#2 1191 - 025X#1 1191 - 030X
CLEWBOARDS, FOR RIVET AND LINER FASTENINGA range of aluminium clewboards for self tacking jibs. All these clewboards use 4.5 mm rivets.
PART NO. PRODUCT DESCRIPTION
A MM B MM TICKNESS MM LINERS REQUIRED MM
RIVETS REQUIRED
HR1190-05 Clewboard #3 190 50 2 5 x 14 5
HR1190-07 Clewboard #2 230 70 2 5 x 14 14
HR1190-090 Clewboard #9 260 90 3 5 x 19 14
1190-050 1190-0701190-090
Index
36
Telephone: +31 (0)297 237575 • [email protected]
Sail Hardware
CARBON FIBRE PRODUCTSThrough extensive research and testing, Rutgerson has set up a Carbon Fibre pre-preg lamination process. They can now offer clewboards, headboards and other products in carbon fibre.
The new carbon fibre-range outperforms conventional products due to the extraordinary strength and bending properties of carbon fibre. All carbon fibre products are manufactured on individual request.
Saving weight is critical for racing. An entire market has evolved due to the increasing demand for lighter and stronger fittings. For example, the most critical location on the boat to save weight is the top of the sail. Carbon fibre headboards would be the optimal solution.
Due to the flexible facilities, there is have the possibility to produce customised products made of carbon fibre, not only including headboards and clewboards but all kinds of products.
Index
37
Product Catalogue 2018 - 2019 • Contender B.V.
Sail Hardware
CLOSING TOOL FOR HOLLOW TUBULAR RIVETS FOR HEADBOARDS AND CLEW BOARDS.This tool only can be used in a hydraulic-, fly- ,toggle-, or cam-operated press.
PART NO.
HR1240 two piece closing tool SS Rivets
SEMI TUBULAR ALUMINIUM RIVETS
PART NO. L1 MM LI MM Ø MM B MM PACKED QTY
HAN11 10.0 3.5 3.9 9.0 100
HAN12 12.5 3.5 3.9 9.0 100
HAN1 10.0 3.5 4.6 9.5 100
HAN2 12.5 3.5 4.6 9.5 100
HAN3 15.0 3.5 4.6 9.5 100
H1230 closing tool for HAN 1-3 1
LINERSStainless Steel Liners for headboards and clew boards
PART NO. OUTER Ø MM LENGHT MM PACKED QTY.
HR1250-14 14 15 20
HR1250-19 19 22 20
HR1250-23 23 17 20
CLOSING TOOL FOR LINERS
PART NO. LINER MM
HR1260-14 14
HR1260-19 19
HR1260-23 23
Index
38
Telephone: +31 (0)297 237575 • [email protected]
Sail Hardware
CLEWBLOCKSRutgerson’s Clewblocks come with 60, 80 or 100 mm removable delrin sheaves and are available in both silver and black anodized cheek plates. The webbing slots are smoothly rounded in order to prevent chafe. The sheave can easily be removed by unscrewing the M5 bolt that assembles the construction through a SS socket.
PART. NO. COLOUR SHEAVE Ø MM CHEEK MM FOR WEBBING MM MAX ROPE MM APPROX SWL
HR1692-060S Silver 60 3 30 12 1200 kg
HR1692-060B Black 60 3 30 12 1200 kg
HR1692-080S Silver 80 4 40 16 1650 kg
HR1692-080B Black 80 4 40 16 1650 kg
HR1692-100S Silver 100 4 40 16 3000 kg
HR1692-100B Black 100 4 40 16 3000 kg
152
27
82º
10
4
Ø60
228
42
84º
15
3
Ø100
196
37
84º
13
2
Ø80
Index
39
Product Catalogue 2018 - 2019 • Contender B.V.
Sail Hardware
Index
40
Telephone: +31 (0)297 237575 • [email protected]
Sail Hardware
PRESSURE ABSORBING SLIDE & BATTCAR MAST SELECTION GUIDEWith roughly 120.000 units sold since 2003, the Rutgerson Battcar has proven to be a winner for sailors on all oceans and in all environments. Available for a wide variety of masts. This fullbatten car makes the mainsail safer and simpler to handle.
The numbering system works as follows:
- The first 4 digits determine the model of the car.
- The middle 2 digits determine the mast profile they fit.
- The last 2 digits determine the attachment to the sail.
Rutgerson Battcar ref #
BATTCAR REF -->
HR1525-11 HR1530-11-XX HR1535-11-XX
HR1525-16 HR1530-16-XX
HR1525-19 HR1530-19-XX
HR1525-20 HR1530-20-XX
HR1525-23 HR1530-23-XX HR1535-23-XX
HR1526-11 HR1531-11-XX HR1536-11-XX
HR1528-23 HR1540-23-XX
EQUIVALENT HOLT ALLEN
HA89 HA90 HA91
SPARCRAFTF135, F195, F305, F385, F460, I620, S622, I830,
S830
NG60, NG70, NG80, NG86, F580, F740,
F1060, F1395, S1630, S2100, F2390, F3360,
F4600
F35, F50, F67, F78,
F101, S137, S180, S260, S330, IMS80,
IMS256
NG60, NG70, NG80, NG86, NG105, F580, F740,F1060,
F1395, F2390, F3360,F4600
SELDÉN1)
1335
C156, C175, C193, C211, C227, C245, C264, C285,
C304
JOHN MAST 135D, 148D, 150D, 165D, 167D, 185D, 186D, 208D, 222D, 245D, 280D, 305D,
335D
220E, 262E, 290E
150E, 116E, 125E
220E, 262E, 290E
Z SPARS Z301, Z351, Z380, Z401, Z501, Z531, Z601,Z602, Z701, Z702
Z209, Z1001, Z1250, Z1400
Z170, Z190, Z230, Z265
Z1001, Z1250, Z1400
SOROMAP NF200, NF270, NF350, NF430, NF540, NF710,
NF1410
Note:For application in monohull mainsails >50m2 (592sq ft.) use the High Load Battcar versions with reference no 1535-XX-XX. It is also mandatory to applicate all Rutgerson battcars with the assembly screw pointing upwards in the mast gate. It is not recommended to use any of Rutgerson Battcars in mainsails >80m2 (861sq ft.).1) If the Seldén mast is equipped with a sail entry gate with a cassette with tongue and rubber spring pad, it has to be converted to a track gate insert for fullbatten sails (Seldén part no 505-516-01, 505-524-01) For information regarding applications in other mast sections than the above specified, please contact us.
BATTCAR LIMOUSINE, FOR BOATS UP TO 60FTRutgerson is now filling the gap in the boat segment for cruising applications on monohulls up to approximately 60' in length. Available in 23mm profile width, this battcar will cover the majority of the larger spar sections from Sparcraft, as well as other HA91 profiles. It is manufactured in aluminium from a solid extrusion, which makes it extremely strong. Available in two versions. The RU-1540-23-05 with M12 stainless steel thread for full batten applications, fx the 1612 big boat batten receptacle. The RU-1528-23 is a composite intermediate version for 25mm webbing
1540-23-05
1528-23
Index
41
Product Catalogue 2018 - 2019 • Contender B.V.
Sail Hardware
BATTCAR ATTACHMENT SYSTEM
BATTCAR GENERAL DIMENSIONS
1530-XX-03
Alu Fork with Swivel
The 1530-XX-03 battcar has an aluminum fork with swivel. To be used with receptacle 1490.
1530-XX-09
SS M10 Extended Thread
The 1530-XX-09 has an extended M10 thread adapter and stainless steel base. Use with 1580, 1590 or 1595. Sail off set is 64 mm.
The 1530-XX-05 has a M10 thread adapter and stainless steel base. Use with 1580, 1590 or 1595. Sail off set is 39 mm.
1530-XX-05
SS M10 Thread
Body 11 mm
1530-11-XX & 1535-11-XX
Body 20 mm
1530-20-XX
Body 16 mm
1530-16-XX
Body 23 mm
1530-23-XX & 1535-23-XX
Body 19 mm
1530-19-XX
Body 16 mm with big wheel
1531-16-XX
Body 11 mm with big wheel
1531-11-XX
Body 23 mm with big wheel
1531-23-XX
The 1530-XX-10Battcar is designed to use with a webbing strap. With remov-able pin.
1530-XX-10
Intermediate Capstan
The 1525-XX Battcar is designed to use with a webbing strap. No removable pin.
1525-XX
Intermediate
Index
42
Telephone: +31 (0)297 237575 • [email protected]
Sail Hardware
BATTCAR
PART NO. PRODUCT DESCRIPTION RECOMMENDED FITTNG APPROX. PUSH KG
APPROX. PULL KG
11 mm (for Selden 1335 mast profile)
HR1525-11 Intermediate HR1490G/strap - -
HR1530-1110 Intermediate Capstan HR1490G/strap - 350
HR1530-1103 Alu Fork, with Swivel HR1490 290 260
HR1530-1105 SS M10 Thread HR1580 / HR1585 / HR1590 / HR1595 550 350
HR1530-1109 SS M10 Extended Thread HR1580 / HR1585 / HR1590 / HR1595 550 350
HR1530-1115 SS fork (no swivel) HR1490G* 200 175
HR1535-1105 SS M10 Thread, HIGH LOAD HR1580 / HR1585 / HR1590 / HR1595 785 450
HR1535-1110 Intermediate, HIGH LOAD HR1490G/strap - 450
HR1535-1115 SS fork (no swivel) HR1490G* 785 450
HR1540-1105 SS M12 Limousine HR1602 / HR1612 1000 920
HR1540-1106 SS M10 Limousine HR1601 / HR1610 1000 920
HA111 Headboard Car System A - - -
HB11 Headboard Car System B - - -
16 mm (equivalent HA 89)
HR1525-16 Intermediate HR1490G/strap - -
HR1530-1610 Intermediate Capstan HR1490G/strap - 400
HR1530-1603 Alu Fork, with Swivel HR1490G* 290 260
HR1530-1605 SS M10 Thread HR1580 / HR1585 / HR1590 / HR1595 550 400
HR1530-1609 SS M10 Extended Thread HR1580 / HR1585 / HR1590 / HR1595 550 400
HR1530-1615 Alu Fork, with Swivel HR1490G* 200 175
HA16 Headboard Car System A - - -
19 mm (equivalent HA 90)
HR1525-19 Intermediate HR1490G/strap - -
HR1530-1910 Intermediate Capstan HR1490G/strap - 420
HR1530-1903 Alu Fork, with Swivel HR1490G* 290 260
HR1530-1905 SS M10 Thread HR1580 / HR1585 / HR1590 / HR1595 550 420
HR1530-1909 SS M10 Extended Thread HR1580 / HR1585 / HR1590 / HR1595 550 420
HR1530-1915 SS fork (no swivel) HR1490G* 200 175
HA19 Headboard Car System A - - -
20 mm (for Selden C Track mast profile)
HR1525-20 Intermediate HR1490G/strap - -
HR1530-2010 Intermediate Capstan HR1490G/strap - 400
HR1530-2003 Alu Fork, with Swivel HR1490G* 290 260
HR1530-2005 SS M10 Thread HR1580 / HR1585 / HR1590 / HR1595 550 420
HR1530-2009 SS M10 Extended ThreadHR1580 / HR1585 / HR1590 / HR1595 /
HR1596 / HR1597550 450
HR1535-2005 SS M10 Thread, HIGH LOAD HR1580 / HR1585 / HR1590 / HR1595 785 550
HR1535-2010 Intermediate, HIGH LOAD HR1490G/strap - 550
HA20 Headboard Car System A - - -
Index
43
Product Catalogue 2018 - 2019 • Contender B.V.
Sail Hardware
PART NO. PRODUCT DESCRIPTION RECOMMENDED FITTNG APPROX. PUSH KG
APPROX. PULL KG
23mm (equivalent HA 91)
HR1525-23 Intermediate HR1490G/webbing - -
HR1530-2310 Intermediate Capstan - - 450
HR1530-2303 Alu Fork, with Swivel HR1490G* 290 260
HR1530-2305 SS M10 ThreadHR1580 / HR1585 / HR1590 / HR1595 /
HR1596 / HR1597550 450
HR1530-2309 SS M10 Extended ThreadHR1580 / HR1585 / HR1590 / HR1595 /
HR1596 / HR1597550 450
HRA111 Headboard Car System A - - -
HR1535-2305 SS M10 Thread, HIGH LOADHR1580 / HR1585 / HR1590 / HR1595 /
HR1596 / HR1597900 575
HR1535-2309 SS M10 Extended ThreadHR1580 / HR1585 / HR1590 / HR1595 /
HR1596 / HR1597900 575
HR1535-2310 Intermediate, HIGH LOAD - - 575
HRB11 Headboard Car System B - - -
HR1528-23 Intermediate Capstan Limousine Webbing - -
HR1540-2305 SS M12 Limousine HR1601 / HR1610 1000 920
HR1540-2306 SS M12 Limousine HR1601 / HR1610 1000 920
HRC Headboard Car System C - - -
11 mm Big Wheel
HR1526-11 Intermediate HR1490G/webbing - -
HR1531-1110 Intermediate Capstan - - 350
HR1531-1105 SS M10 ThreadHR1580 / HR1585 / HR1590 / HR1595 /
HR1596 / HR1597575 350
HR1531-1115 SS fork (no swivel) HR1490G* 200 175
HR1536-1105 SS M10 ThreadHR1580 / HR1585 / HR1590 / HR1595 /
HR1596 / HR1597785 450
HR1536-1110 Intermediate - - 450
HR1536-1115 SS fork (no swivel) HR1490G* 785 450
HRA111 Headboard Car System A - - -
16 mm Big Wheel
HR1526-16 Intermediate HR1490G/webbing - -
HR1531-1605 SS M10 ThreadHR1580 / HR1585 / HR1590 / HR1595 /
HR1596 / HR1597550 400
23 mm Big Wheel
HR1526-23 Intermediate HR1490G/webbing - -
HR1531-2305 SS M10 ThreadHR1580 / HR1585 / HR1590 / HR1595 /
HR1596 / HR1597550 450
HR1536-2305 SS M10 ThreadHR1580 / HR1585 / HR1590 / HR1595 /
HR1596 / HR1597900 575
HR1536-2310 Intermediate - - 575
Index
44
Telephone: +31 (0)297 237575 • [email protected]
Sail Hardware
RUTGERSON HEADBOARD CARSThe headboard cars in black anodized aluminium are robust and easily attached to the corresponding headboard. The system is constructed with either 2 or 3 cars that can easily be disassembled from the cheek plate with a retractable circlip on system A and B or Allen key on system C. The initial version of the headboard cars has been upgraded with jointed battcars. The battcars can move independent of each other, which means that the headboard cars can more easily enter the track gate.
FIND CORRESPONDING HEADBOARDS AND THEIR SPECIFICATIONS UNDER CHAPTER BOARDS.
SYSTEM CAR SYSTEM MONO SAIL AREA MULTI SAIL AREA WEIGHT
HRA111 2 x 1530 < 38ft 40 m2 < 31 ft 28 m2 230 gr
HRB11 3 x 1535 < 47 ft 55 m2 < 38 ft 40 m2 357 gr
HRC 2 x 1540 < 60 ft 80 m2 < 47 ft 55 m2 740 gr
* Available on request
LUFFSHUTTLE: MULTI ROLLER-CAR SYSTEM FOR FULLY BATTENED SAILSDesigned and manufactured by Contender Italy, these batten luff shuttles are similar to the Rutgerson 1530 series, but each car comes with nine different carbon slides so they will fit almost all mast tracks. With a stainless steel M10 thread the cars are compatible with most batten receptacles. An intermediate shuttle slide car is also available to compliment the luff shuttle suitable for boats up to 38 feet. Each pack of a luff shuttle comes complete with all the different attachments.
PART NO.
HLUFFINNER with aluminium joint for webbing connection with sail
HLUFFBATT with 10 mm RVS steel ball joint for connection to batten fitting
SYSTEM A SYSTEM B SYSTEM C
sail
mast
3 c
m
Index
45
Product Catalogue 2018 - 2019 • Contender B.V.
Sail Hardware
A
B
Db
CE F
CLEW SLIDER
PART NO. L MM B1 MM Ø MM
HSS0760 76 4 11.7
RUTGERSON SINGLE SLUG SLIDES
PART NO. PRODUCT DESCRIPTION LENGTH MM Ø MM PLATE THICKNESS MM
APPROX. SWL KG
HR1201 Slug Slide Ø7 mm 48 7 2 250
HR1202 Slug Slide Ø12 mm 54 12 2 500
HR1203 Slug Slide Ø9 mm 48 9 2 500
HR1204 Slug Slide 12 mm 54 - 2 500
RUTGERSON SUPER RING INTEGRAL SLUG SLIDESThe stainless steel integral slug slides fit the Rutgerson Super Ring System. Using the corresponding sized SR Ring, the slug slide can be pressed into the sail in one operation.
PART NO. SR RING SLUG SLIDE A MM B MM B MM C MM E MM F MM
HR1012-07 14 1201 48 7 2 7 28 34
HR1012-09 14 1203 54 9 2 9 33 47
HR1014-07 20 1201 48 7 2 7 28 34
HR1014-09 20 1203 54 9 2 9 33 47
HR1014-12 20 1204 61 12 2 12 31 45
HR1016-09 25 1203 54 9 2 9 33 47
HR1016-12 25 1204 61 12 2 12 31 45
1201 1203 1202 1204
NEW
Index
46
Telephone: +31 (0)297 237575 • [email protected]
Sail Hardware
SELDÉN/KEMP SLIDESSpecial slug slides, Nylon, White. Black slide for full batten sails
PART NO. LENGTH MM
B1 MM
FOOT MM
PACKED QTY
HHA458 30 4 15 100
HHA558 25 4 11 100
HR2241-1030 30 8 20 100
HR2241-1040 40 8 20 100
HHA1158 45 4.5 15 10
ROUND SLUG SLIDESRound slug slides, Nylon, White. Black slides for full batten sails
PART NO. LENGTH MM
B1 MM Ø MM
PACKED QTY
HHA158 21 3 9 50
HHA258 25 3 14 50
HHA358 22 3 13 100
HHA1058 45 4 7 10
HHA958 45 4 9 10
HHA758 45 4 11.5 10
FLAT INTERNAL TRACK SLIDESInternal track slides, Nylon, White. Black slides for full batten sails (45 mm long)
PART NO. FOR TRACK PACKED QTY
HHA89 16 mm 100
HHA90 19 mm 100
HHA91 22 mm 100
HSS0662 25 mm 100
HHA95 16 mm 10
HHA92 19 mm 10
HHA96 22 mm 10
SLUG SLIDES WITH STAINLESS STEEL BAIL
PART NO. LENGTH MM
Ø MM
PACKED QTY
HHB1416 25 7.5 10
HHB1417 25 9.0 10
HHB1419 30 11.0 10
HHB1418 30 12.5 10
L
O
Index
47
Product Catalogue 2018 - 2019 • Contender B.V.
Sail Hardware
SNAP ON SHACKLES - PLASTIC
PART NO. LA MM LI MM BI MM PACKED QTY
HHA749 37 20 9 100
HHA849 39 22 9 100
HSS0461 38 23 7 100
HSS0459 46 30 8 100
HSS0458 51 42 8 100
SCREW ON SHACKLES - STAINLESS STEEL
PART NO. LA MM LI MM BI MM Ø
HPI160051 28 17 12 M5
HPI160042 28 20 11 M4
HPI165206 36 23 16 M6
HPI160052 36 24 16 M5
HPI160043 36 27 11 M4
HPI160053 47 36 16 M5
*Available on request
SCREW ON SHACKLES - PLASTIC
PART NO. LA MM LI MM BI MM PACKED QTY
HHA349 26 18 3 100
HHA449 44 27 6 100
HHA549 53 33 6 100
HA
HA
SS
La
Bi
Li
ÿ
Index
48
Telephone: +31 (0)297 237575 • [email protected]
Sail Hardware
LUFF PROTECTORSTransparant plastic material, for piston hanks
PART NO. LL MM LA MM FOR USE WITH SIZE
PRICE/ST
HCT151 34 60 “0”, “1” 100
HCT152 37 65 “2” 100
HCT153 47 73 “3” 100
HCT154 54 80 “4”, “5” 100
PLASTIC JIB HANKS
PART NO. FORESTAY LENGTH MM PACKED QTY
HHA144 max. 3 mm 31 100
HHA244 max. 4 mm 33 100
SAIL BLOCKSThe solution for lazy jack and/or covers for furling sails
PART NO. L MM B MM Ø MM PACKED QTY
HHA886 40 6 16 100
HRMRS01 sew on eyelets
HRMRS03 sew on blocks
HA886 RMRS01 RMRS03
Index
49
Product Catalogue 2018 - 2019 • Contender B.V.
Sail Hardware
SNAP-ON HANKSStainless steel
PART NO. LENGTH MM FORESTAY MM SIZE
HSR2486 50 7.5 0
HSR2483 55 9.0 1
HSR2487 65 11.0 2
HSR2489 80 13.0 3
HSR2488 90 17.0 4
Bronze with stainless steel spring
HSR72486 50 7.5 0
HSR72483 55 9.0 1
HSR72487 65 11.0 2
PISTON HANKSBrass, made in Sweden
PART NO. LENGTH MM FORESTAY MM SIZE
HHK5040 40 7 0
HHK5050 50 9 1
HHK5060 60 12 2
HHK5070 70 16 3
HHK5080 80 17 4
HHK5090 90 21 5
HHK5100 100 23 6
WICHARD WEB ON SNAP HOOKS, EXTRA STRONG
PART NO. LENGTH MM Ø1 MM BRL KG WL KG
HSR2381 75 10 1600 880
HSR2382 100 14 4000 1680
WICHARD WEB ON SNAP HOOKS
PART NO. LENGTH MM Ø1 MM BRL MM WL MM
HSR2480 50 6 300 200
HSR2481 75 10 700 480
HSR2482 100 13 1500 1120
Index
50
Telephone: +31 (0)297 237575 • [email protected]
Sail Hardware
LEECHLINE CLEATS
PART NO. TYPE ROPE Ø MM
MATERIAL TOTAL LENGTH MM
DISTANCE HOLES MM
WIDTH MM RIVET Ø
HCL212 Cleat Star Board 2 - 5 Nylon 70 49 21 4.5
HCL212BP Backplate 2 - 5 Nylon 71 49 21 4.5
HCL212A Cleat Cover 2 - 5 Nylon 70 49 21
HCL214W Cleat Port 2 - 5 Nylon 70 49 21 4.5
HCL221 Dinghy-cleat 0 - 3 Nylon 43 33 17 3
HCL233 Sail Line-cleat 2 - 6 Nylon 57 - 34 sew on
HCL233B Backplate 2 - 6 Nylon 57 - 34 sew on
HCL241 Racing Sail Line (starboard) 3 - 6 Aluminium 70 49 21 4.5
HCL273 Racing Sail Line (port) 3 - 6 Aluminium 70 49 21 4.5
HCL258 Racing Fine Line (starboard) 3 - 6 Aluminium 70 49 21 4.5
HCL259 Racing Fine Line (port) 3 - 6 Aluminium 70 49 21 4.5
HCL267 Racing Sail Edge cleat 1 - 4 Nylon/Alu - - - 14
HCL269 Sail Edge cleat 1 - 4 Nylon - - - 14
GRAN-SEGEL® CLEATS
PART NO. SIZE FOR LINE Ø MM
LENGTH MM
FOR USE ON
HGS1 small 1 - 2.5 30 Surf and dinghy sails
HGS2 medium 1 - 4.0 45 Yachts up to 10 m
HGS3 large 2 - 5.0 60 Yachts up to 15 m
CL221 CL212BP
CL212 CL214WCL212A
CL259
CL241
CL267
|-------- 50 mm --------|
CL269
CL233
CL233BP
CL258
Index
51
Product Catalogue 2018 - 2019 • Contender B.V.
Sail Hardware
ROUND RINGSHigh grade stainless steel A304
PART NO. ØI MM THICKNESS MM
HCT0711 20 3
HCT0712 25 4
HCT0713 25 5
HCT0714 30 4
HCT0716 30 5
HCT0717 35 6
HCT0718 30 6
HCT0719 40 5
HCT0720 40 6
HCT0721 40 8
HCT0723 45 8
HCT0724 50 6
HCT0725 50 8
HCT0727* 50 10
HCT0729* 75 8
HCT0731* 75 10
HCT0733* 100 10
*Available on request.
D-RINGSHigh grade stainless steel A304
PART NO. BI MM THICKNESS MM
HCT0911 20 3
HCT0912 25 3
HCT0914 25 4
HCT0918 25 5
HCT0913 30 3
HCT0915 30 4
HCT0917 40 4
HCT0923 50 5
HCT0928 50 6
*Available on request
Index
52
Telephone: +31 (0)297 237575 • [email protected]
Sail Hardware
SHOCK CORD ON ROLL
PART NO. DESCRIPTION ROLL (M)
HAL041-100 Shock cord 4 mm white 100
HAL049-100 Shock cord 4 mm black 100
HAL061-075 Shock cord 6 mm white 75
HAL69-075 Shock cord 6 mm black 75
HAL089-75 Shock cord 8 mm black 75
SHOCK CORD CLAMPS
PART NO. DESCRIPTION
HHB1230 Clamp plier
HHB4-100 Clamps 4-5 mm - 100 pc
HHB6-100 Clamps 6 mm - 100 pc
HHB8-100 Clamps 8 mm - 100 pc
Index
ww
w.c
onte
nder
-tt.
com
Webbing & VelcroYKK Velcro • Buckles & Loops • Polyester WebbingDyneema Webbing
55
Product Catalogue 2018 - 2019 • Contender B.V.
Webbing & Velcro
WEBBING BRIDGES
PART NO. DESCRIPTION L MM HOLE DISTANCE WEBBING MM
RVS
HSS0596 Curved strip 51 40 25
HSR9211 Curved strip 64 54 25
HRVSBB25 Solid 48 37 25
HRVSBB25ROND Solid curved 48 - 25
HSR9212 Curved thread 76 66 30
HSS0597 Curved strip 72 61 40
HSS0598 Curved strip 81 67 50
HSR9222 Curved wire 97 82 50
HEK36252 Curved wire 88 77 50
Plastic
HD693 White nylon 48 38 30
HD694 White nylon 61 50 40
HD695 White nylon 69 58 50
HHA38-10 Grey Polyprop 58 42 25
HHA138-10 Grey Polyprop 67 50 35
SS0596
RVSBB25
HA38
HD693/4/5
DYNEEMA WEBBINGRoll lenght 50 m, sold per roll.
PART NO. WIDTH MM COLOUR BREAKING LOAD
HDW025 25 White 1200 kg
HDW050 50 White 2500 kg
Index
56
Telephone: +31 (0)297 237575 • [email protected]
Webbing & Velcro
LADDER BUCKLES
PART NO. COLOUR WEBBING PACK
YKKLG58020 Black nylon 20 100
YKKLG58025 Black nylon 25 100
YKKLG58030 Black nylon 30 100
YKKLG58038 Black nylon 38 100
PLASTIC BUCKLES
PART NO. DESCRIPTION WEBBING PACK
HYKKSCG58020 Black nylon 20 100
HYKKSCG58025 Black nylon 25 100
HYKKSCG58030 Black nylon 30 100
HYKKSCG58038 Black nylon 38 100
HYKKSCG58050 Black nylon 50 100
STAINLESS STEEL CLAMP BUCKLES
PART NO. DESCRIPTION WEBBING
RVSKGMF25Z RVS Type HD 25
RVSKGMF25 RVS Type Make Fast 25
RVSKGMF25
RVSKGMF25Z
Index
57
Product Catalogue 2018 - 2019 • Contender B.V.
Webbing & Velcro
SLIDING BAR BUCKLES
PART NO. DESCRIPTION WEBBING
HHD0412 Stainless steel buckle, Nylon bar 25
HRVSSG25 Stainless steel buckle, Stainless steel bar 25
HSS0670 Stainless steel buckle, Nylon bar 30
HSS0674 Stainless steel buckle, Nylon bar 40
HSS0678 Stainless steel buckle, Nylon bar 50
HSS0672 Stainless steel buckle, Aluminium bar 30
HSS0676 Stainless steel buckle, Aluminium bar 40
HSS0680 Stainless steel buckle, Aluminium bar 50
SS2548 Mounting plate for SS0678 + 0680 -
* Available on request
PLASTIC LEVER BUCKLE
PART NO. COLOUR WEBBING PACK
HYKKKG58020 Black nylon 20 100
HYKKKG58025 Black nylon 25 100
Nylon slide
Mounting plate
Aluminum slide
STAINLESS STEEL LEVER BUCKLE
PART NO. WEBBING
HD324 25
HD325 40
HD350 50
PLASTIC SNAP BUCKLES
PART NO. COLOUR WEBBING PACK
HYKKSTG58015 Black nylon 15 100
HYKKSTG58020 Black nylon 20 100
HYKKSTG58025 Black nylon 25 100
HYKKSTG58030 Black nylon 30 100
HYKKSTG58038 Black nylon 38 100
HYKKSTG58050 Black nylon 50 100
Index
58
Telephone: +31 (0)297 237575 • [email protected]
Webbing & Velcro
YKK VELCRO
PART NO. HOOK PART NO. LOOP WIDTH MM COLOUR LENGTH MM
HYKKKBH57320 YKKKBL57320 20 Beige 25
HYKKKBH57720 YKKKBL57720 20 Grey 25
HYKKKBH07120 YKKKBL07120 20 Navy 25
HYKKKBH57325 YKKKBL57325 25 Beige 25
HYKKKBH57725 YKKKBL57725 25 Grey 25
HYKKKBH07125 YKKKBL07125 25 Navy 25
POLYESTER VELCRO
ARTICLE HOOK ARTICLE LOOP WIDTH MM COLOUR LENGTH ROLE M
HVK510 HVK511 16 White 25
HVK590 HVK591 16 Black 25
HVK310 HVK311 20 White 25
HVK390 HVK391 20 Black 25
HVK110 HVK111 25 White 25
HVK190 HVK191 25 Black 25
HVK410 HVK411 30 White 25
HVK490 HVK491 30 Black 25
HVK610 HVK611 38 White 25
HVK210 HVK211 50 White 25
HVK290 HVK291 50 Black 25
Index
59
Product Catalogue 2018 - 2019 • Contender B.V.
Webbing & Velcro
WHITE POLYESTER WEBBINGRoll length 100m, except light weight = 50m, sold per roll
PART NO. GW WIDTH MM BREAKING LOAD
Light weight
HGU101110 GW1110 10 -
Standard weight
HGU111120 GW1120 20 710 kg
HGU111125 GW1125 25 907 kg
HGU111130 GW1130 30 1170 kg
Heavy weight
HGU121120 GW2120 20 610 kg
HGU121125 GW2125 25 825 kg
HGU121130 GW2130 30 968 kg
HGU121140 GW2140 40 1275 kg
HGU121150 GW2150 50 1630 kg
Extra heavy weight
HGU131125 GW3125 25 1295 kg
HGU131130 GW3130 30 1530 kg
HGU131140 GW3140 40 1985 kg
HGU131150 GW3150 50 2550 kg
POLYESTER WEBBING, COLOURED
PART NO. GW NRS COLOUR WIDTH MM LENGTH M
HGU179020 GW8920 Black 20 100
HGU179025 GW8925 Black 25 100
HGU179050 GW8950 Black 48 100
Index
ww
w.c
onte
nder
-tt.
com
Seaming & SewingSewing Thread • Needles • Venture Tape • Accessories
63
Product Catalogue 2018 - 2019 • Contender B.V.
Seaming & Sewing
CONTENDER SOLBOND - BONDED SEWING THREADSolbond is produced by the German company Zwicky who are recognised as the leading producer of industrial sewing thread. Solbond offers excellent sewability, outstanding abrasion resistance and high breaking strength as well as UV resistance. Solbond has been developed for yacht sails, sun protection and textile structures.
SOLBOND 10 SOLBOND 20 SOLBOND 30 SOLBOND 40
Bobbin size 1000 m 1.500 m 2.500 m 3.000 m
Application 9.5 oz-16 oz 7.0 oz- 10 oz 4.0 oz - 8.0 oz 0.75 oz - 4.0 oz
Needle sizeNM 160- 200
23 – 26NM 120- 160
19 – 23NM 110 – 130
18 – 21NM 90 – 110
14 – 18
TECHNOLOGY
Ticket / dtex No. 10 No. 20 No. 30 No. 40
dtex 2500 dtex 1500 dtex 1000 dtex 750
Strength 13.0 kg 8.9 kg 5.5 kg 4.5 kg
elongation 20% (17%-23%) 16 % (13 % – 19 %) 14 % (11 % – 22 %) 14 % (11 % – 22 %)
CHEMICAL PROPERTIES
Wash fastness (ISO 105 C03) – Note 4 - 5
Water fastness (ISO 105 E01) – Note 4 and better
Rub fastness (ISO 105 X12) – Note 4 and better
Colour retention (ISO 105 B02) – Note 4 and better
PRICES CONTENDER SOLBOND
PART NO. TYPE SPOOL LENGTH M
HSOL10…. Solbond No. 10 1000
HSOL20…. Solbond No. 20 1500
HSOL30…. Solbond No. 30 2500
HSOL40…. Solbond No. 40 3000
* Solbond 10 only in Natural, Black and Red
Available colours
Natural111
Tanbark9386
Burgundy9446
Red9514
Blue9515
Grey9499
Steel Grey9356
Black9527
Index
64
Telephone: +31 (0)297 237575 • [email protected]
Seaming & Sewing
GORE™ TENARA® SEWING THREADFor seams that last as long as the fabric. 15 year warranty.
PART NO. DESCRIPTION MAKE POLYESTER EQUIVALENT
(NM)
LENGTH PER SPOOL (M/KLOS)
Clear
HM1000LTR-L5 Tenara Clear Light Mono filament 50/V69 2100
HM1000KTR-L5 Tenara Clear Medium Mono filament 35/V92 1750
To order coloured GORE™ TENARA® thread in the thickness M1000TR-XX-5 or M1003HTR-XX-5, add the following colour codes "XX": WH (White), CB (Chesapeake Blue), RD (Red), GY (Grey), LG (Light grey), TN (Beige), BK (Black), NB (Navy Blue)
Colored
HM1000TR-(XX)-5 Tenara Medium Mono filament 35/V92 1750
GORE™ TENARA® SEWING THREADTENARA® manufactured by W.L. Gore & associates. TENARA® is developed for high speed seewing, beside that it is developed for excellent UV en chemical durability.
M1000LTR M1000KTR
Length of spool 2.100m 1.750 m
Usage Pillows, bindingCanopies, UV covers, yacht sails,
shade sails
Needle sizeNM 90 – 110
14 – 16NM 100- 120
18
TECHNOLOGY
Ticket No./ dtex No./Tkt. 50 No./Tkt. 35
dtex 1111 dtex 1556
Strength/colour 3.5 kg 5.0 kg / 4.0 kg
Available colours
White Chesapeake Blue
TANRed BlackLight GreyNavy Blue
NEW
Index
65
Product Catalogue 2018 - 2019 • Contender B.V.
Seaming & Sewing
TERKO THREAD - POLYESTER / COTTON INDUSTRIAL SEWING THREAD FOR WATERPROOF SEAMS.Terko is a cotton wrapped polyester corespun thread. Terko threads are specially developed for water sports and various outdoor applications where a waterproof seam is required.
TERKO 20 TERKO 25
Application area Coated acrylic fabric
Bobbin size 2.000m 2.500m
Colours Natural, Black, Perla, Antracita, Marino, Cafe, Vison, Beige, Granate, Avena, Admiral
Needle size NM 120 – 140 / 19 – 22 NM 110 – 130 / 18 – 21
Filament number 4 ply 3 ply
Ticket No./ dtex No./Tkt. 20 – dtex 1500 No./Tkt. 25 – dtex 1050
Strenght > 6.5 kg > 5.0 kg
Elongation Ø 19% (16%-24%) Ø 19% (16%-24%)
CHEMICAL PROPERTIES
Washing at 60C (ISO 105 C03) – Note 4
Water fastness (ISO 105 E01) – Note 4
Rub fastness (ISO 105 X12) – Note 4
TERKO SATIN
PART NO. DESCRIPTION SPOOL LENGTH M
HTERKO20-….. TERKO 20 satin 2.000
HTERKO25-….. TERKO 25 satin 2.500
Available colours
NaturalNATRL
BurgundyR3983
Black09700
ToastHO673
ChocalateR8987
SandR8569
BeigeH1919
WhiteR1700
NavyM0287
RoyalH0016
SilverR9138
CharcoalH0004
Index
66
Telephone: +31 (0)297 237575 • [email protected]
Seaming & Sewing
SCISSORSMedium scissors for use on any kind of cloth, with polished blades. The RQ1026 is especially designed for cutting Carbon, Kevlar and Dyneema materials. The blades are made of high Carbon Molybdenum Vanadium stainless steel for extra long edge life. Ergonomic styled and padded grip made of soft plastic.
PART NO. LENGTH MM
HRQ102603 250 Right Normal use 56-58 HRC
HRQ104603 250 Left Normal use 56-58 HRC
HRQ1026 240 Right Aramid
* Available on request
HOT KNIFE
PART NO. DESCRIPTION
HEW0 60 watt - 230 volt with EURO-plug, without blades
ACCESSORIES
HEW1 Blade for cloth
HEW2 Blade for rope
THREAD CLIPSStainless steel blades, plastic handles
PART NO. DESCRIPTION
HRQ203761 Thread Clip curved
HRQ203861 Thread Clip straight
HHB1558 Seam Ripper
HHB1557 Thread Clip
Curved
Straight
ew2 ew1
Seam ripper
Index
67
Product Catalogue 2018 - 2019 • Contender B.V.
Seaming & Sewing
SCRATCH AWLTop quality with yellow plastic handle
PART NO. LENGTH MM PACKED QTY
HHB1571 110 12
PALMS
PART NO. DESCRIPTION
HWS8051 Palm no. 2 1/2 Right
HWS8052 Palm no. 2 1/2 Left
HWS8151 Palm Right Hand “Professional Seaming”
HWS8152 Palm Left Hand “Professional Seaming”
ACRYLIC SEAMING TAPENon yellowing pure acrylic double sided tape with anti fungicide. A top quality seaming tape, for any kind of material.
PART NO. WIDTH MM ROLL LENGTH M
HAD9006-208 6 50
HAD9009-208 9 50
HAD9012-208 12 50
HAD9015-208 15 50
HAD9020-208 20 50
HAD9100-208 1000 10
*Can also be used for PVC
3M VENTURE SUPER TACK SEAMING TAPENon yellowing high perfomance acrylic double sided tape on a polyester carrier film for excellent adhesion on sailcloth, acryl and WeatherMax!
PART NO. WIDTH MM ROLL LENGTH M
HADVT06 6 50
HADVT09 9 50
HADVT12 12 50
HADVT15 15 50
HADVT19 19 50
HADVT25 25 50
PUSH PINSStainless steel pins with plastic or aluminium head
PART NO. LENGTH PACKED QTY
HHB1570 28 mm with red plastic head 100
HHB1572 28 mm with aluminium head 100
Index
68
Telephone: +31 (0)297 237575 • [email protected]
Seaming & Sewing
HAND SEWING THREADWhite, prewaxed. A spool is approximately 16 oz / lbs
PART NO. TYPE LENGTH PER SPOOL
HHB81346 V346 960 m
HHB81462 V462 715 m
SAIL REPAIR SETS
PART NO. TYPE
HWS5201 SRS type 1
HWS5202 SRS type 2
SAILMAKING NEEDLESWILLIAM SMITH & SON® Tri-angular, packed quantity 25
PART NO. LENGTH MM Ø MM
HWS5109 No. 9 102 mm 3.5
HWS5110 No. 10 89 mm 3.0
HWS5112 No. 12 81 mm 2.6
HWS5113 No. 13 79 mm 2.3
HWS5114 No. 14 76 mm 2.0
HWS5115 No. 15 72 mm 1.9
HWS5116 No. 16 69 mm 1.6
HWS5117 No. 17 65 mm 1.4
HWS5118 No. 18 62 mm 1.2
HWS5119 No. 19 49 mm 1.0
HWS5120 Envelope with 5 assorted needles (No. 13,15,16,17,18)
HWS5121 Tube with 20 assorted needles (4 each No. 14 - 18) + 2 sewing needles
WS 5201 WS 5202
Index
69
Product Catalogue 2018 - 2019 • Contender B.V.
Seaming & Sewing
STAEDLER PENCILS
PART NO. COLOUR PACKED QTY.
HSTAEDT108-0 white 12
HSTAEDT108-9 black 12
SPEEDY STITCHER
PART NO. DESCRIPTION PACKED QTY.
HGA1 Wooden handle + 2 needles 1
Related items
HGA03-12 Replacement needle GA1 12
HGA13-12 Needles short 12
HGA04-12 Replacement bended GA1 12
HGA14 Coil (without yarn) 1
HGA15 Coarsely waxed yarn for speedy stitcher 160 m
HGA17 Fine waxed yarn 160 m
Index
ww
w.c
onte
nder
sailc
loth
.com
AdhesivesPolyester Insignia • Sailnumbers • Insignia TapesAdhesive Foam • Spinnaker Repair Tape
73
Product Catalogue 2018 - 2019 • Contender B.V.
Adhesives
POLYESTER INSIGNIAAdhesive backed polyester cloth, width 137 cm. Full rolls only, 10 and 50 yards.
PART NO. COLOUR
HCM 10 White
HCM 20 Dark Blue
HCM 60 Red
HCM 90 Black
HCM 93 Light Grey
UV coated, also for printing
IN00UV White
SAILNUMBERSPacked quantity 10
PART NO. SIZE COLOUR
HCTZ02* 250 mm Blue
HCTZ06* 250 mm Red
HCTZ09* 250 mm Black
HCTZ22* 300 mm Blue
HCTZ26* 300 mm Red
HCTZ29* 300 mm Black
HCTZ52* 380 mm Blue
HCTZ56* 380 mm Black
HCTZ59* 380 mm Red
*please fill after the part no. the letter or number of choice.
DIGITAL SAILNUMBERSPacked quantity 10
PART NO. SIZE COLOUR
HCTC228 300 mm Blue
HCTC268 300 mm Red
HCTC298 300 mm Black
NED
Index
74
Telephone: +31 (0)297 237575 • [email protected]
Adhesives
ADHESIVE WHITE FOAM, 5 MM THICK
PART NO. WIDTH ROLL LENGTH
HFOAM -40MM 40 mm 25 m
HFOAM -50MM 50 mm 25 m
HFOAM 100 cm 50 m
* Sold per full roll only
MYLAR REPAIR TAPEMylar with adhesive
PART NO. DESCRIPTION WIDTH MM
ROLL LENGTH M
HPSG050310 Mylar 0.5 mil 50 3
HPSG150310 Mylar 0.5 mil 150 3
HPSK750110 Kevlar/Mylar 75 1.5
SPINNAKER REPAIR TAPENylon Insignia on rolls of 4.5 m in 50 mm width
PART NO. COLOUR
HPSA500411 White
HPSA500421 Light Blue
HPSA500422 Dark Blue
HPSA500429 Pink
HPSA500430 Green
HPSA500441 Yellow
HPSA500443 Fluor Yellow
HPSA500450 Orange
HPSA500460 Red
HPSA500490 Black
HPSA500491 Grey
INSIGNIA TAPES
PART NO. LENGTH WIDTH COLOUR
HHB1922 45 m 20 mm Blue
HHB1926 45 m 20 mm Red
HHB1929 45 m 20 mm Black
HHB1D 45 m 25 mm (1”) White
HHB2D 45 m 50 mm (2”) White
HHB3D 45 m 76 mm (3”) White
HHB4D 45 m 102 mm (4”) White
Index
ww
w.c
onte
nder
-tt.
com
Tapes & Luff TapesWelded Luff Tapes • Seamed Luff Tapes • Bolt RopesLuff Lines • Tape Folders • Polyester Tapes • Nylon Tapes
77
Product Catalogue 2018 - 2019 • Contender B.V.
Tapes & Luff Tapes
CONTENDER PVC COATED LUFF TAPE WITH HARD BRAIDED LUFF LINEThe base for the luff tape is a 500 x 500 denier polyester cloth which is coated with PVC on the inside to weld the tape firmly around a hard braided Gleistein luff line. The outside of the tape is impregnated with a special formula to prevent it from getting mildew and ensure the tape to slide easily through the head stay profile.
PART NO. DIAMETER TAPE MM DISTANCE TO 2ND CORD MM
HCL4.0 4 -
HCL4.5 4.5 -
HCL5.0 5 -
HCL5.5 5.5 -
HCL6.0 6 -
HCL7.0 7 -
HCL4.0-2 4 13
HCL4.5-2 4.5 13
HCL5.0-2 5 13
HCL5.5-2 5.5 13
HCL6.0-2 6 13
A cutting fee will be charged for a cut length.
TRADITIONAL SEAMED LUFF TAPEThe base of the luff tape is 7 oz polyester cloth, traditionally sewn around a braided line
PART NO. DIAMETER LUFFLINE MM DISTANCE TO 2ND CORD MM
HKL201 3 -
HKL205 4 -
HKL206 4.5 -
HKL209 5 -
HKL207 6 -
HKL220 8 -
HKL217 4.5 10
HKL208 5 10
HKL213 6 10
HKL202 4 25
HKL210 4.5 25
HKL203 5 25
HKL214 6.5 25
A cutting fee will be charged for a cut length.
Index
78
Telephone: +31 (0)297 237575 • [email protected]
Tapes & Luff Tapes
BOLT ROPEBolt rope in Polyester for stretchy luff. 3-strand. Sold per reel.
PART NO. DIAMETER MM REEL LENGTH M
HRSO124006 6 200
HRSO124007 7 200
HRSO124008 8 200
HRSO124009 9 200
HRSO124010 10 200
TEFLON TAPESpecial tape for use on forestay systems, extremely low friction
PART NO. WEIGHT WIDTH MM COLOUR
HTeflon 8 oz - 125 White
TAPE FOLDER
PART NO. DESCRIPTION
HR1650 folds your tape, in a quick and easy way accurately
LUFFLINEPrestretched Polyester, low elongation. 16 plait cover with fibre inlay. Sold per reel.
PART NO. DIAMETER MM REEL LENGTH M
HGR423011 3.0 250
HGR423511 3.5 250
HGR424011 4.0 250
HGR424511 4.5 250
HGR425011 5.0 250
HGR426011 6.0 250
HGR428011 8.0 250
User guide:– Loosen the two wing nuts (A). Push the two stainless steel
plates outwards as shown.– Fold and crease half a metre of the tape (D), exactly in the
middle, that you want to fold.– Insert the folded and creased tape into either the top or lower
slot.Use the narrow slot for tapes lighter than 280 grams/sqm, and the wider slot for tapes heavier than 280 grams/sqm. The fold should point towards the stainless plate. If necessary you can use slot E to feed the tape through the folder.
– Push the two stainless steel plates inwards untill the crease of the folded tape has been reached. Then tighten the two wing nuts A.
– Pull the tape through the tape holder.– The tape folder can be placed in a vice or bolted to a bench
(using holes F), for added stability, when pulling the tape.
Index
79
Product Catalogue 2018 - 2019 • Contender B.V.
Tapes & Luff Tapes
POLYESTER TAPES, NATURALSold per roll (100M)
PART NO. WEIGHT OZ-G/M2
WIDTH MM
HTAP40025 4 - 170 25
HTAP40030 4 - 170 30
HTAP40040 4 - 170 40
HTAP40050 4 - 170 50
HTAP40060 4 - 170 60
HTAP50050 5 - 210 50
HTAP50060 5 - 210 60
HTAP50070 5 - 210 70
HTAP50080 5 - 210 80
HTAP50090 5 - 210 90
HTAP50100 5 - 210 100
HTAP60050 6 - 255 50
HTAP60060 6 - 255 60
HTAP60070 6 - 255 70
HTAP60080 6 - 255 80
HTAP60090 6 - 255 90
HTAP60100 6 - 255 100
HTAP60125 6 - 255 125
HTAP70060 7 - 300 60
HTAP70070 7 - 300 70
HTAP70080 7 - 300 80
HTAP70090 7 - 300 90
HTAP70100 7 - 300 100
HTAP70120 7 - 300 120
HTAP70125 7 - 300 125
HTAP70150 7 - 300 150
Index
80
Telephone: +31 (0)297 237575 • [email protected]
Tapes & Luff Tapes
POLYESTER TAPES, COLOUREDSold per roll
PART NO. WEIGHT WIDTH MM COLOUR
HTAP40730 4 oz - 170 g/m2 30 Red
HTAP40750 4 oz - 170 g/m2 50 Red
HTAP46630 4 oz - 170 g/m2 30 Dark Blue
HTAP46650 4 oz - 170 g/m2 50 Dark Blue
HTAP699050 6 oz - 255 g/m2 50 Black
HTAP699060 6 oz - 255 g/m2 60 Black
HTAP699070 6 oz - 255 g/m2 70 Black
HTAP699080 6 oz - 255 g/m2 80 Black
HTAP699090 6 oz - 255 g/m2 90 Black
HTAP699100 6 oz - 255 g/m2 100 Black
HTAP799060 7 oz - 300 g/m2 60 Black
HTAP799070 7 oz - 300 g/m2 70 Black
HTAP799080 7 oz - 300 g/m2 80 Black
HTAP799090 7 oz - 300 g/m2 90 Black
HTAP799100 7 oz - 300 g/m2 100 Black
HTAP794070 7 oz - 300 g/m2 70 Grey
HTAP794080 7 oz - 300 g/m2 80 Grey
HTAP794090 7 oz - 300 g/m2 90 Grey
HTAP794100 7 oz - 300 g/m2 100 Grey
FIBERCON® TAPES, NATURALSold per roll
PART NO. WEIGHT WIDTH MM
HTAP638060 6.38 oz – 255 g/m2 60
HTAP638070 6.38 oz – 255 g/m2 70
HTAP638080 6.38 oz – 255 g/m2 80
HTAP638090 6.38 oz – 255 g/m2 90
HTAP638100 6.38 oz – 255 g/m2 100
HTAP638120 6.38 oz – 255 g/m2 120
HTAP738070 7.38 oz - 300 g/m2 70
HTAP738080 7.38 oz - 300 g/m2 80
HTAP738090 7.38 oz - 300 g/m2 90
HTAP738100 7.38 oz - 300 g/m2 100
Index
ww
w.c
onte
nder
-tt.
com
ComponentsBattenpockets • Sail Reinforcements
83
Product Catalogue 2018 - 2019 • Contender B.V.
Components
LEECH BATTEN POCKET 75 MM TAPEFits OR1/OR2/OR3
PART NO. LENGTH MM
HXBPL07501 750
HXBPL09001 900
HXBPL10501 1050
HXBPL12501 1250
HXBPL15001 1500
HXBPL18001 1800
HXBPL21001 2100
CONTENDER BATTEN POCKETSReady to be stitched on to the sail. Complete with Velcro closing. The leech pockets come with finished front end, while the full batten pockets come with an open front end. Packed quantity is 10 pcs.
LEECH BATTEN POCKET 100 MM TAPEFits OR4/OR5
PART NO. LENGTH MM
HXBPL15004 1500
HXBPL18004 1800
HXBPL21004 2100
FULL BATTEN POCKET 75 MM TAPEFits OR1/OR2/OR3
PART NO. LENGTH MM
HXBPF10002A 1000
HXBPF12002A 1200
HXBPF15002A 1500
HXBPF18002A 1800
HXBPF24002A 2400
HXBPF30002A 3000
FULL BATTEN POCKET 100 MM TAPEFits OR4/OR5
PART NO. LENGTH MM
HXBPF30003A 3000
HXBPF36003A 3600
HXBPF42003A 4200
HXBPF50003A 5000
HXBPF60003A 6000
Batten Pocket
Velcro Insert
Index
84
Telephone: +31 (0)297 237575 • [email protected]
Components
CLEW/TACK PATCHES
PART NO. WEIGHT EDGE LENGTH MM PACKED QTY.
A B
HXCLEW641 6.4 400 280 10
HXCLEW6415 6.4 560 390 10
HXCLEW642 6.4 700 490 10
HXCLEW743 7.4 1000 700 10
HXCLEW744 7.4 1300 910 10
HXCLEW745 7.4 1600 1120 10
MAIN HEAD PATCHES
PART NO. WEIGHT EDGE LENGTH MM PACKED QTY.
A B C
HXHEADM641 6.4 120 500 375 10
HXHEADM742 7.4 170 1000 750 10
HXHEADM743 7.4 220 1500 1125 10
GENOA HEAD PATCHES
PART NO. WEIGHT EDGE LENGTH MM PACKED QTY.
A B C
HXHEADJ641 6.4 40 600 260 10
HXHEADJ742 7.4 60 900 400 10
HXHEADJ743 7.4 80 1200 540 10
A
B
CGenoa Head Patch
A
B
C
Mainsail Head Patch
A
BClew/Tack Patch
Index
ww
w.c
onte
nder
-tt.
com
FASTENERSLoxx • DOT Fasteners • Q-Snap • Perfix • CAF 316
87
Product Catalogue 2018 - 2019 • Contender B.V.
Fasteners
LOXXLoxx is the recognized fastener in the marine market, consisting of a self-locking push-button and a bullet. Loxx is made from nickel-plated brass or chrome-plated brass, the inside of the button is always made of stainless steel.
TOP PARTSPacked per 50
PART NO. DESCRIPTION
HLOXX01 Hybrid stainless steel / Nickel plated
HLOXX15 chrome-plated brass
HLOXX12 nickel-plated brass
HLOXX13 100% Stainless steel
*Custom top parts with company logo are available. Minimum order quantity of 3000 pieces.
LOXX TOOLS
PART NO. DESCRIPTION
HLOXX20 Small stainless steel key for buttons cloth confirmation
HLOXX29 Tool for opening LOXX with wooden handle
HTARIEP Tool for opening LOXX with plastic handle
BOTTOM-PARTSPacked per 100
PART NO. DESCRIPTION
HLOXX03 Mounting cloth with thread, nickel-plated
HLOXX04 Mounting cloth with thread, chromed
HLOXX05 Plate for two screws, nickel-plated L = 34.2 mm
HLOXX09 Stainless steel screw 12mm, chrome plated brass ball
HLOXX14 Stainless steel screw 12mm, nickel plated brass ball
HLOXX10 Stainless steel screw 12mm, stainless steel ball
HLOXX16 Stainless steel screw 16mm, chrome plated brass ball
HLOXX11 Stainless steel screw 16mm, nickel plated brass ball
HLOXX06 Stainless Steel wire M5 x 10 mm brass ball, chromed
HLOXX07 Stainless Steel wire M5 x 10 mm brass ball, nickel-plated
HLOXX08 Stainless Steel wire M5 x 12 mm stainless steel ball
Index
88
Telephone: +31 (0)297 237575 • [email protected]
Fasteners
DURABLE DOTWhen superior snap action and holding strength is needed, Durable DOT is the fastener to use. Self-piercing, so no pre-punching is required, the Durable DOT heavy-duty construction assures a firm grip that will remain secure through years of use.
CAPS (A), NICKEL PLATE
PART NO. DESCRIPTION
HTRW10128 Cap, 4.4 mm pin
HTRW10128-9 Cap black, 4.4 mm pin
HTRW10128N Blue cap, 4.4mm pin
HTRW10127 Cap, 6.4 mm pin
HTRW10129 Cap, 7.9 mm pin
HTRW10224 Stud (B) for 10127/10128/10129
STUDS (C), NICKEL PLATE
PART NO. DESCRIPTION PACKED
HTRW10370 Standard stud 100
HTRW10373 Eyelet stud, without flange 100
HTRW10379 Eyelet stud, low shelf (used for rivets) 100
HTRW10342 Gyspy stud (with pin) 100
HTRW10412 Post / Eyelet 6.1 mm pin 100
HTRW10413 Post / Eyelet 7.9 mm pin 100
HTRW10301-12 Screw Stud, with flange, # 8 12.0 mm, self-drilling 100
HTRW10301-20 Screw Stud, with flange, # 8 20.0 mm, self-drilling 100
HTRW10302L Screw Stud, with flange, # 10 14.0 mm, self-drilling 100
HTRW10393-12 Screw Stud, with flange, # 8 12.0 mm, self-tapping 100
HTRW10393-20 Screw Stud, with flange, # 8 20.0 mm, self-tapping 100
HTRW10708-12 Screw Stud, with flange, bolt # 10-32, 12.0 mm 100
HTRW10708-20 Screw Stud, with flange, bolt # 10-32, 20.0 mm 100
HTRW10388 Windshield clip for table 19.1 mm 100
HTRW10388-10 Windshield clip for table 19.1 mm 10
HTRW10391 Windshield clip for table 22.2 mm 100
HTRW10391-10 Windshield Clip for list 22.2 mm 10
HTRW10314 Rivet button for 1.6 to 4.8 mm thick material 100
HTRW10319 Rivet button for 4.8 to 9.6 mm thick material 100
TRW10370
Cap (A)
heig
ht
Stud (B)
TRW10373
TRW10412
TRW10342
Screw stud
TRW10388
Rivet
Index
89
Product Catalogue 2018 - 2019 • Contender B.V.
Fasteners
COMMON SENSECommon Sense fasteners are positive locking fasteners that will not open accidentally. Each fastener is assembled with a spring mechanism that holds the fastener under tension in the desired position until turned and released by hand. Common Sense fasteners can both be applied onto hard and soft undergrounds.
TURN BUTTONS, NICKEL PLATEPacked per 100.
PART NO. DESCRIPTION
HTRW78322 Turn button, two screw hole base, height 17 mm
HTRW78323 Turn button, two screw hole base, height 20 mm
HTRW78332 Turn button, two prong base, height 17 mm
HTRW78507 Backplate for TRW78332
GROMMETSPacked per 100
PART NO. DESCRIPTION
HTRW78403 Grommets
HTRW78505 Washer for TRW8403
HTRW78510 Back Plates for TRW78403
TRW78322
TRW78403
TRW78323
TRW78505
TRW78332
TRW78510
TRW78507
DURABLE DOT RVS
PART NO. DESCRIPTION
HTRW40127 Cap, 6.4 mm pin
HTRW40128 Cap, 4.4 mm pin
HTRW40224 Stud ( B ) for HTRW 40127 / 40128
HTRW40370 Part ( C )
HTRW40412 Cloth fastening 6.1 mm pin
Index
90
Telephone: +31 (0)297 237575 • [email protected]
Fasteners
PULL-THE-DOTPull-the-DOT is a heavy duty, three sided locking snap fastener, that is designed to withstand extreme pressure on three sides without unlocking. When pulled on the fourth side where the Pull-the-DOT trademark appears, the fastener will release instantly. This unique feature sets the Pull-the-DOT apart from other standard fasteners.
CAPS, NICKEL PLATEPacked per 100
PART NO. DESCRIPTION
HTRW18100 Cap (A) with pin
HTRW18201 Sockets (B)
BOTTOM PARTS ( C ), NICKEL PLATEPacked per 100
PART NO. DESCRIPTION
HTRW18307 Screw studs, #8 x 9.5 mm
HTRW18303 Studs
HTRW10412 Posts/ Eyelets TRW18303, 6.1 mm pin
TRW18100
TRW18307
TRW18201
TRW18303 TRW10412
Index
91
Product Catalogue 2018 - 2019 • Contender B.V.
Fasteners
TOOLSThe DOT® M-840 hand attaching press is light and portable, therefore easy to carry wherever required. The tool ensures that any DOT® item can be attached with only one hand in a single movement.
PROFESSIONAL TOOLS M840
PART NO. DESCRIPTION
HTRWM840 Hand Attaching Press (no dies incl)
HTRWM840-1 Replacement rubber for stamp confirmation
HTRWM840-2 Replacement rubber for stamp confirmation, oval
HTRWM840-3 Replacement rubber for stamp confirmation, old version
Dies for DOT DURABLE®
HTRW4403 Cap die, upper, for TRW 10128/10127
HTRW4303 Print die, under, for TRW10224
HTRW4304 Button die, upper, for TRW 10370/10379
HTRW4404 Cloth fastening die, under, for TRW 10412/10413
Dies for COMMON SENSE®
HTRW4103 Hole die, upper, for TRW 78403
HTRW4203 Hole die, under, for TRW78403
HTRW4302 Assembly die, upper, for TRW 78403
HTRW4402 Assembly die, under, for TRW 78505
Dies for PULL-THE-DOT®
HTRW4405 Cap die, upper, for TRW 18100
HTRW4305 Print die, under, for TRW 18201
HTRW4304 Button die, upper, for TRW 18303
HTRW4404 Cloth fastening die, under, for TRW 10412
HAND TOOLS
PART NO. DESCRIPTION FOR
Hand tools for DURABLE DOT®
HTRWH9936 Dies 18100, 10127, 10128, 10412, 10413
HTRWH164 Slagstempel 10127, 10128, 10129, 10412, 10413
HTRWH169N Snapmaster setting tool 10301, 10302
Hand tools for COMMON SENSE®
HTRWH9908 Snapmaster setting tool 78324, 78325
HTRWH171 Snapmaster cutting tool 78332, 78507
HTRWH450 Snapmaster cutting tool 78403 , 78505
Hand tools for PULL-THE-DOT®
HTRWH169N Cutting punch 18307
TRW840
TRWH9936
TRWH164
TRWH169N
TRWH9908
TRWH171
TRWH450
Index
92
Telephone: +31 (0)297 237575 • [email protected]
Fasteners
ACCESSOIRES
PART NO. DESCRIPTION PACKED
HHQ19020-1 Q-STUD holder 1
HHQ19020-10 Q-STUD holder 10
HHQ19030-1 Q-STUD marker 1
HHQ19030-5 Q-STUD marker 5
HHQ19040-10 Q Installation Pin 10
HHQ190500 Tools for Q-STUD/CAP 1
HQ15001
HQ19020
HQ19030
HQ19040
HQ19010
HQ190500
Index
93
Product Catalogue 2018 - 2019 • Contender B.V.
Fasteners
CAF 316CAF 316 consists of 4 parts. The CAF-cap and CAF-socket are fixed in fabric. The CAF-stud in mounted on either a fixed surface (with screw, M4, self-drilling screw or blind rivet) or on fabric as well with an eyelet. All parts are made of stainless steel and available in packs of 100 or 1000.
CAPS (A), STAINLESS STEEL
PART NO. DESCRIPTION
HHQ21000-100 Cap, 4.4 mm high pin
HHQ21010-100 Cap, 6.4 mm high pin
HHQ210001-0100 Cap Black, 4.4 mm stift
HHQ210006-0100 Cap Navy Blue, 4.4 mm stift
SOCKETS (B)
PART NO. 100 PC DESCRIPTION
HHQ220000-100 Socket
STUDS & FIXING ( C ), CAF 316For fastening purposes with screw,bolt, or attaching to cloth
PART NO. DESCRIPTION
HHQ230000-100 Cap
HHQ240500-100 Eyelets for cap HQ23000
HQ22000
HQ210000
HQ23000
HQ240500
Index
94
Telephone: +31 (0)297 237575 • [email protected]
Fasteners
MINAX QUICK FASTENERClosure
PART NO. DESCRIPTION PACKE D
HMF01-100 Quick fastener cap white 100
HMF019-100 Quick fastener cap black 100
Bottom parts
HMF03-100 stainless steel screw 100
HMF04-100 Bolt M4 x 20mm 100
HMF07-100 Quick fastener bottom part white 100
HMF079-100 Quick fastener bottom part black 100
Tools
HMF18 key professional 1
HMF19 key easy 1
Index
ww
w.c
onte
nder
-tt.
com
Sprayhood FittingsDeck Fittings • Deck Hinges • End Plugs • Connectors • TubesTube Trimming Tools • Clamps
97
Product Catalogue 2018 - 2019 • Contender B.V.
Sprayhood Fittings
SWIVEL BALL FITTINGS
PART NO. DESCRIPTION TUBE Ø MM
HRVSMSDB22 For rail mount 22
HRVSMSDB25 For rail mount 25
HRVSKGSV22 For deck mount 22
HRVSKGSV25 For deck mount 25
DECK FITTINGS
Several deck fittings for tents and sprayhoods
PART NO. DESCRIPTION
HRVSDPRECHTS Deck fitting 90° with screw
HRVSDPRECHTP90 Deck fitting 90° with pin
HRVSDPSS Deck fitting 80° with screw
HRVSDPRECHTP80 Deck fitting 80° with pin
HRVSDPRS Round deck fitting with screw
HRVSDPRP Round deck fitting with pin
DECK FITTINGS
Several tiltable-,rotating-, and detachable deck fittings
PART NO. DESCRIPTION
HEK86657 SS Deck fitting for tubes with 22mm Ø, removeable
HEK86658 SS Deck fitting for tubes with 25mm Ø, removeable
HRVSDPKBL Tiltable deck fitting with stainless steel base and nylon fork
HRVSDPKS Tiltable deck fitting in stainless steel with screw
HRVSDPKBP Tiltable deck fitting in stainless steel with pin
HRVSDD 360° rotating deck fitting in SS with screw deluxe
HRVSDPKBL360 360° rotating deck fitting in SS with screw low
EK86657
Index
98
Telephone: +31 (0)297 237575 • [email protected]
Sprayhood Fittings
GUARDIAL AND TUBE FITTINGS- RECTANGULAR BASE
PART NO. TUBE Ø MM ANGLE LA MM LL MM BA MM BL MM
HEK86078 22 30° 75 15 43 23
HEK87038 22 60° 78 61 44 26
HEK87040 22 90° 77 60 43 27
HEK86178 25 30° 81 27 47 32
HEK87039 25 60° 83 66 48 29
HEK87041 25 90° 81 66 48 29
HEAVY DUTY CAST DECK FITTINGS
PART NO. TUBE Ø MM L MM Ø MM
HEK91722 22 97 63.5
HEK91625 25 97 73.0
Heavy duty cast stainless deck fitting for recessed mounting with removable fork
HEK86596-1 footplate 83 59.0
HEK86596-2 approach - -
GUARDIAL AND TUBE FITTINGS - ROUND BASE
PART NO. TUBE Ø MM ANGLE ØA MM LL1 MM LL2 MM
HEK87029 22 30° 67 43 43
HEK87030 25 30° 71 47 47
HEK87032 22 60° 67 50 35
HEK87033 25 60° 71 54 38
HEK87034 22 90° 67 43 43
HEK87035 25 90° 71 47 47
LLLa
BL Ba
LL2LL2
LL1
Øa
�
Index
99
Product Catalogue 2018 - 2019 • Contender B.V.
Sprayhood Fittings
TUBE HOLDER
PART NO. DESCRIPTION
HRVSBKHZ20 Stainless steel 20mm
HRVSBKHZ22 Stainless steel 22mm
HRVSBKHZ25 Stainless steel 25mm
JOINT FITTINGS
PART NO. DESCRIPTION TUBE Ø MM
HRVSMS20 Joint fitting equipped with one set screw 20
HRVSMS22 Joint fitting equipped with one set screw 22
HRVSMS25 Joint fitting equipped with one set screw 25
HRVSMS30 Joint fitting equipped with one set screw 30
HEK86601 Joint fitting with eye 22
HEK86603 Joint fitting with eye 25
HRVSMSDLX22 Joint fitting with deluxe imbus 22
HRVSMSDLX25 Joint fitting with deluxe imbus 25
HRVSMSDEEL22 Unfolding joint fitting with drop nose pin 22
HRVSMSDEEL25 Unfolding joint fitting with drop nose pin 25
HRVSMSDEEL30 Unfolding joint fitting with drop nose pin 30
HEK86592 Unfolding joint fitting with quick locking and drop nose pin 22
HEK86595 Unfolding joint fitting with quick locking and drop nose pin 25
HEK86593 Unfolding joint fitting with quick locking and drop nose pin 30
Index
100
Telephone: +31 (0)297 237575 • [email protected]
Sprayhood Fittings
END PLUGS
PART NO. OUTSIDE Ø MM INSIDE Ø MM
HHD591 18.0 13.0
HHD601 19.0 15.9
HHD601A 19.0 16.7
HHD611 22.0 19.8
HHD621 25.0 21.0
HHD591A 20 Plug Adapter for HD 591
ADJUSTABLE END PLUGS
PART NO. DESCRIPTION TUBE Ø MM
HHD8029 internally 20
HHD8030 internally 22
HHD8032 internally 25
HRVSESV22 externally 22
HRVSESV22 externally 25
END PLUGS
PART NO. DESCRIPTION TUBE Ø MM
HRVSES20 End plug with eye equipped with one set screw 20
HRVSES22 End plug with eye equipped with one set screw 22
HRVSES25 End plug with eye equipped with one set screw 25
HEK86310 End plug with eye equipped with one set screw 30
HRVSESDLX22 End plug deluxe, 2x imbus 22
HRVSESDLX25 End plug deluxe, 2x imbus 25
HEK86600 End plug with fork 22
HEK86602 End plug with fork 25
HRVSESH22 End plug, hooked 22
HRVSESH25 End plug, hooked 25
HD591
Index
101
Product Catalogue 2018 - 2019 • Contender B.V.
Sprayhood Fittings
KNOB BOLTS AND PINS
PART NO. DESCRIPTION
HEK37757 Knurled-head screw for canopy fittings, 17 mm
HEK37765 Knurled-head screw for canopy fittings, 25 mm
HEK11630Quick Release Pin with ball lock, with 15 cm steelwire,
Ø 6.35 mm, 22 mm length
HRVSQRP Quick Release pin with wire
HRVSBP Fast pin with ring 25 mm
SIDE PLATES
PART NO. DESCRIPTION
HRVSSZP Deck hinge side mounted with screw
HHD625 Side plate for Keylock endplug, flat mounting base
HHD625C Side plate for Keylock endplug, hollow for tube
KEY LOCK ENDPLUGS
PART NO. OUTSIDE Ø MM INSIDE Ø MM
HHD3329 18 13.0 mm
HHD3336 19 (¾") 15.9 mm (5/8")
HHD3330 25(1") 21.0 mm
HHD591A 20 Adapter for HD3329
DECK TRACKS
PART NO. DESCRIPTION
HHD2602 Stainless steel tracks 3.0 m
HHD2604-4 Stainless steel tracks 1.2 m
HHD2603 Plastic endplug
HHD2604 Sliding car for HD603
HHD2601 Sliding car for HD866
MAKEFAST DECK TRACKS
PART NO. DESCRIPTION
HHD3360-12 RVS rail, 25 mm width, 1.2 m long
HHD3360-18 RVS rail, 25 mm width, 1.8 m long
HHD3380 Stainless steel slider with straight fork
HHD3381 Stainless steel slider with angled fork
HHD3390 2 stainless steel end stoppers for HD3360
HD2604
Index
102
Telephone: +31 (0)297 237575 • [email protected]
Sprayhood Fittings
DOUBLE TAKE OFF CLAMPS
PART NO. DESCRIPTION TUBE Ø MM
HHD615 Pipe clamp RVS, 2 bolts 19
HHD616 Pipe clamp RVS, 2 bolts 22
HHD617 Pipe clamp RVS, 2 bolts 25
HHD608 knob for HD615-617 -
VARIOUS PIPE FITTINGS
PART NO. DESCRIPTION
HER87101 Aluminum Connector for tube 20 mm Ø x 2.0 mm
HHD4218 Stainless Steel Connector for tube 22 mm Ø x 1.5 mm
HHD4219 Stainless Steel Connector for tube 25 mm Ø x 1.5 mm
HEK9106005 Double take off clamp for winch
HALTC22 Plastic tube connector 22 mm Ø x 1.5 mm
HALTC25 Plastic tube connector 25 mm Ø x 1.5 mm
KNEE PIECES
PART NO. DESCRIPTION TUBE Ø MM
HRVSKSP22 Hinged end piece, high-gloss polished stainless steel 22
HRVSKSP25 Hinged end piece, high-gloss polished stainless steel 25
TUBE BENDING DEVICEA manageable tool for bending aluminum and stainless steel tubes, possibly on location. Interchangeable bending wheels for 20, 22 and 30 mm Ø pipes. Supplied as standard with rollers for Ø 25 mm pipe. Suitable for tubes up to 30 mm Ø and 1.5 mm wall thickness. For tight turns it will be necessary to make the right turn in several corridors.
PART NO. DESCRIPTION
HHD9330 Tool with Rollers for 25 mm tube
HHD9330A Rollers for 20 mm tube
HHD9330B Rollers for 22 mm tube
HHD9330C Rollers for 30 mm tube
HD615
HD616
HD9330
Index
ww
w.c
onte
nder
-tt.
com
ZIPPERSOPTILON • YKK
105
Product Catalogue 2018 - 2019 • Contender B.V.
Zippers
OPTILON RT 25 ZIPPERSHigh quality zipper with extra durable pin and box. The used polyester band is treated with a UV stabilizer and a water repellent coating. The zippers are available in a wide range of colors and lengths. For ordering please fill in the color code where xxxx is positioned in the article code.
PART NO. LENGTH CM DESCRIPTION WIDTH MM
HOPT25RTxxxx100 100 Closed end / double pull 11
HOPT25RTxxxx150 150 Closed end / double pull 11
HOPT25RTxxxx200 200 Closed end / double pull 11
HOPT25RTxxxx250 250 Closed end / double pull 11
HOPT25RTxxxx300 300 Closed end / double pull 11
HOPT25RTxxxx350 350 Closed end / double pull 11
HOPT25RTxxxx400 400 Closed end / double pull 11
ONLY IN NATURAL LENGTH M
HOPT25RT2710600 6 Closed end / double pull 11
HOPT25RT2710800 8 Closed end / double pull 11
HOPT27101000 10 Closed end / double pull 11
HOPT27101300 13 Closed end / double pull 11
HOPT27101600 16 Closed end / double pull 11
HOPT27102000 20 Closed end / double pull 11
HOPT25RTxxxxROL 100 on a rol 11
HOPT25RT3763 na nickel slider -
Natural2710
Beige8542
Black9700
Grey9971
Silver9389
Index
106
Telephone: +31 (0)297 237575 • [email protected]
Zippers
YKK COIL 10MM ZIPPERS SINGLE CLOSED ENDHigh quality zipper with extra durable pin and box. The used polyester band is treated with a UV stabilizer and a water repellent coating. The zippers are available in a wide range of colors and lengths. For ordering please fill in the color code where xxxx is positioned in the article code.
PART NO. LENGTH CM DESCRIPTION WIDTH MM
HYKKSP1xxx008 80 double pull 10
HYKKSP1xxx010 100 double pull 10
HYKKSP1xxx015 150 double pull 10
HYKKSP1xxx020 200 double pull 10
HYKKSP1xxx025 250 double pull 10
HYKKSP1xxx030 300 double pull 10
HYKKSP1xxx035 350 double pull 10
HYKKSP1xxx040 400 double pull 10
HYKKSP1xxx045 450 double pull 10
HYKKSP1xxx050 500 double pull 10
HYKKSP1xxx100 10m double pull 10
HYKKSP1xxx120 12m double pull 10
HYKKSP1xxx150 15m double pull 10
HYKKSP1xxx200 20m double pull 10
YKK COIL 8MM ZIPPER CLOSED ENDHigh quality zipper with extra durable pin and box. The used polyester band is treated with a UV stabilizer and a water repellent coating. The zippers are available in a wide range of colors and lengths. For ordering please fill in the color code where xxxx is positioned in the article code.
PART NO. LENGTH CM DESCRIPTION WIDTH MM
HYKKSP8xxx010 100 double pull 8
HYKKSP8xxx015 150 double pull 8
HYKKSP8xxx020 200 double pull 8
HYKKSP8xxx025 250 double pull 8
HYKKSP8xxx030 300 double pull 8
HYKKSP8xxx035 350 double pull 8
Natural582
Beige573
Black580
Navy071
Silver577
Index
107
Product Catalogue 2018 - 2019 • Contender B.V.
Zippers
YKK MOLDED 10MM ZIPPERS SINGLE CLOSED ENDHigh quality zipper with extra durable pin and box. The used polyester band is treated with a UV stabilizer and a water repellent coating. The zippers are available in a wide range of colors and lengths. For ordering please fill in the color code where xxxx is positioned in the article code.
PART NO. LENGTH CM DESCRIPTION WIDTH MM
HYKKBT1xxx010 100 double pull 8
HYKKBT1xxx015 150 double pull 8
HYKKBT1xxx020 200 double pull 8
HYKKBT1xxx025 250 double pull 8
HYKKBT1xxx030 300 double pull 8
YKK COIL 10MM ZIPPER OPEN ENDHigh quality zipper with extra durable pin and box. The used polyester band is treated with a UV stabilizer and a water repellent coating. The zippers are available in a wide range of colors and lengths. For ordering please fill in the color code where xxxx is positioned in the article code.
PART NO. LENGTH CM DESCRIPTION WIDTH MM
HYKKSPDDxxx015 150 double pull 10
HYKKSPDDxxx020 200 double pull 10
HYKKSPDDxxx025 250 double pull 10
HYKKSPDDxxx030 300 double pull 10
HYKKSPDDxxx040 400 double pull 10
HYKKSPDDxxx050 500 double pull 10
HYKKSPDDxxx060 600 double pull 10
YKK ZIPPER ON ROLLHigh quality zipper with extra durable pin and box. The used polyester band is treated with a UV stabilizer and a water repellent coating. The zippers are available in a wide range of colors and lengths. For ordering please fill in the color code where xxxx is positioned in the article code.
PART NO. LENGTH M DESCRIPTION WIDTH MM
HYKKSP1xxxROL 100 5 colours on a rol 10
HYKKSP8xxxROL 100 5 colours on a rol 8
HYKKSC10D nvt slider double pull 10
HYKKSC10E nvt slider double pull 10
HYKKSC8D nvt slider double pull 8
HYKKSC8E nvt slider double pull 8
Index
ww
w.c
onte
nder
-tt.
com
FabricsWeatherMax™ • Flagship • Sattler PVC • Masacril® • Clear PVC FilmTrampoline Mesh • Sail Bag Fabric
WEATHERMAX™Contender is distributing the WeatherMax™ cover and awning material – a fabric that combines breakthrough UV technology with water resistance and durability. WeatherMax™ is the perfect balance of science, toughness and style.
The WeatherMax™ fabric has taken away the need to make a choice between a waterproof and a breathable fabric by offering a solution to both. WeatherMax™ has a HydroMax finish which ensures there is no need for extra coatings. This makes WeatherMax™ lightweight, water resistant, non sagging and durable. The HydroMax finish also provides excellent breathability to help reduce condensation and mildew.
WeatherMax™ is woven using SaturaMax yarn. SaturaMax yarn technology gives this fabric the same long term colour retention associated with acrylic materials, but with the significant advantage of higher strength, stability and abrasion resistance.
WeatherMax™ is available in two weights and a wide range of colours to suit all applications.
WeatherMax™ is an ideal solution for covers, awnings, UV strips, upholstery, cushions, umbrellas and sun shades.
WEATHERMAX™ 80 COATEDWeatherMax™ Coated is an excellent alternative for Acrylics. With a special coating WeatherMax™ is now waterproof with a water column of 1000mm.
WeatherMax™ Coated quite simply outperforms the competition. It has twice the strength of acrylic and is six times more durable under abrasion and rubbing. WeatherMax Coated has a long life, very good UV properties, fade resistance and an antimildew treatment.
WEATHERMAX™ BIAS BINDINGWeathermax bias binding utilizes the unique qualities of the WeatherMax™ 80 to produce the best bias binding available. It is 44mm wide bias WeatherMax™ 80 folded and fused to 22mm 7/8" finished width. Its fantastic abrasion resistance and superb colour retention make this bias binding suitable for all applications and will outperform all others. Available in various colours and a Suisei binder is available for ease of production and a truly professional finish.
111
Product Catalogue 2018 - 2019 • Contender B.V.
Fabrics
PERFORMANCE PROPERTIES WEATHERMAX™ 80
WEATHERMAX™ COATED
WEATHERMAX™ 65
WEATHERMAX™ FR
Yarn type Saturamax Saturamax Saturamax Saturamax
Finish Hydromax PU coated Hydromax FR Coated
Weight gr/m² 271 300 220 305
Roll width cm 152 150 152 152
Roll length m 68 50 91 59
Tensile strength N/5cm Warp 1810 1850 1700 1875
N/5cm Fill 1710 1840 1300 1750
Tear strength N Warp >85 >45 >65 >55
N Fill >75 >45 >42 >60
Hydro static pressure mm >650 >1350 >550 >900
Spraytest Note 100 Note 90 Note 100 Note 100
Color fastness Note >6 Note >6 Note >6 Note >6
Flame retardant - - - V
Cleaning instructionsWeatherMax™ fabrics may be spot washed by using a soapy solution of a mild detergent and lukewarm water. Rinse thoroughly with clean water to remove the soap and allow to air dry. For mildew stains, prepare a solution of one (1) cup of bleach plus half (1/2) cup of mild detergent per 4 liters water. Spray on the entire area and allow soaking. Rinse with clean water and allow to air dry.
The printed colour may differ from the actual colour. Please only use for your reference.
True Red
80 2934465 29343FR FR344
Scarlet
80 29374
Burgundy
80 29338FR FR338
For est Green
80 2934265 29341FR FR342
Slate Heather
80 29471
Moss
80 29403FR FR403
Pacific Blue
80 2934665 29345FR FR346
Royal
80 29401
Captain Navy
80 2935465 29353
Black
80 2935565 29335FR FR355
Forrest Tweed
80 29397
Light Charcoal
80 2933465 29333FR FR334
Mist
80 2946865 29469
Taupe
80 29377 65 29387
Sand
80 29376
Toast
80 29348 65 29347FR FR348
Sapphire Tweed
80 29396
Graphite
80 29431
Oyster
80 29423
White
80 2937165 29372FR FR371
Yellow
80 2935265 29350FR FR352
Chocolat
80 2943065 29429
Sandstone Heather
80 29470
Beige
80 29389
Index
112
Telephone: +31 (0)297 237575 • [email protected]
Fabrics
WEATHERMAX™ 80
PART NO. COLOUR
HWM80 29334 Light Charcoal
HWM80 29338 Burgundy
HWM80 29342 Forest Green
HWM80 29344 True Red
HWM80 29346 Pacific Blue
HWM80 29348 Toast
HWM80 29352 Yellow
HWM80 29354 Captain Navy
HWM80 29355 Black
HWM80 29371 White
HWM80 29374 Scarlet
HWM80 29376 Sand
HWM80 29377 Taupe
HWM80 29468 Mist
HWM80 29389 Beige
HWM80 29396 Saphire Tweed
HWM80 29397 Forest Tweed
HWM80 29401 Royal Blue
HWM80 29403 Moss
HWM80 29423 Oyster
HWM80 29430 Chocolate
HWM80 29431 Graphite
WEATHERMAX™ 80 LINEN
PART NO. COLOUR
HWM80 29470 Sandstone heather
HWM80 29471 Slate heather
Sandstone Heather
80 29470
Slate Heather
80 29471
Index
113
Product Catalogue 2018 - 2019 • Contender B.V.
Fabrics
WEATHERMAX™ 65
PART NO. COLOUR
HWM65 29333 Lt Charcoal
HWM65 29335 Black
HWM65 29341 Forest Green
HWM65 29343 True Red
HWM65 29345 Pacific Blue
HWM65 29347 Toast
HWM65 29350 Yellow
HWM65 29353 Captain Navy
HWM65 29372 White
HWM65 29469 Mist
WEATHERMAX™ 80 COATED
PART NO. COLOUR
HWM80CTD334 Light Charcoal
HWM80CTD346 Pacific Blue
HWM80CTD354 Captain Navy
HWM80CTD355 Black
HWM80CTD371 White
HWM80CTD376 Sand
HWM80CTD401 Royal Blue
HWM80CTD431 Graphite
HWM80CTD468 Mist
Index
114
Telephone: +31 (0)297 237575 • [email protected]
Fabrics
WEATHERMAX™ 65 - PSA BACKED - UV LEECH COVER GENOA
PART NO. COLOUR
25 cm wide
HWM65A00025 White
HWM65A66025 Pac.Blue
HWM65A77025 Capt.Navy
HWM65A93025 Mist
HWM65A94025 Lt.Charcoal
50 cm wide
HWM65A00050 White
HWM65A66050 Pac.Blue
HWM65A77050 Capt.Navy
HWM65A93050 Mist
HWM65A94050 Lt.Charcoal
150 cm wide
HWM65A00150 White 29371
HWM65A66150 Pac.Blue 5
HWM65A77150 Capt.Navy
HWM65A93150 MIst
HWM65A94150 Lt.Charcoal
WEATHERMAX™ FR
PART NO. COLOUR
HWM80FR334 Light Charcoal
HWM80FR338 Burgundy
HWM80FR344 True Red
HWM80FR346 Pacific Blue
HWM80FR348 Toast
HWM80FR401 Royal Blue
HWM80FR354 Capt. Navy
HWM80FR355 Black
HWM80FR431 Graphite
HWM80FR403 Moss
WEATHERMAX BIAS BINDING 22MMOn 50m rolls
PART NO.
HWM80BBXXX XXX is colour
HWM1650-1022 Suisei binder 22 mm
Index
115
Product Catalogue 2018 - 2019 • Contender B.V.
Fabrics
Index
117
Product Catalogue 2018 - 2019 • Contender B.V.
Fabrics
FLAGSHIP FRFlagship FR is available in two weights. Both are woven with a high-tenacity polyester yarn, therefore having strong tear resistance, low stretch, and good dimensional stability. The fabric is PU c oated on one side, resulting in a very light weight in comparison to more traditional canvasses.
PERFORMANCE PROPERTIES FLAGSHIP 150 FR FLAGSHIP 220 FR FLAGSHIP 450 FR
Yarn HT Polyester HT Polyester
finish PU coated PU coated PU coated
weight gr/m² 150 220 450
roll width cm 205 205 163
roll length m 100 50 50
tensile strength N/5cm warp 1300 2300 2100
N/5cm fill 1300 2100 1500
tear strength N warp >80 >130 58
N fill >80 >130 23
water column mm >3000 >5000 >1000
Spraytest Note 90 Note 90 Note 90
colour fastness Note 6-8 Note 6-8 Note 7-8
flame retardant B1/M1 B1/M1 B1/M1
FLAGSHIP FR
PART NO. AVAILABLE IN DESCRIPTION WEIGHT GR/M²
HFS150FRxx 2 colours Flagship 150 FR - B1/M1 150
HFS220FRxx 1 colours Flagship 220 FR - B1/M1 220
HFS450FR348 Toast Flagship 450 FR - B1/M1 450
Pearl White
150 FR 01
Pearl White
220 FR 01
Silver
150 FR 02
Toast
450 FR 02
Index
118
Telephone: +31 (0)297 237575 • [email protected]
Fabrics
FLAGSHIP COVER
PART NO. AVAILABLE IN DESCRIPTION WEIGHT GR/M²
HFS450Cxx 5 colours Flagship 450 Cover 450
available in cut lengths
FLAGSHIP COVERContender Flagship Cover consists of two different varieties, and is very suitable for covering purposes.
PERFORMANCE PROPERTIES FLAGSHIP 450
yarn Polyester
finish PU coated
weight gr/m² 370
roll width cm 163
roll length m 50
tensile strength N/5cm warp 2000
N/5cm fill 1500
tear strength N warp >80
N fill >80
water column mm >1000
Spraytest Note 90
colour fastness Note >7
flame retardant -
Graphite
450 cover 431
Pacific Blue
450 cover 346
Silver
450 cover 382
Navy
450 cover 354
Black
450 cover 355
Index
119
Product Catalogue 2018 - 2019 • Contender B.V.
Fabrics
Index
120
Telephone: +31 (0)297 237575 • [email protected]
Fabrics
PERFORMANCE PROPERTIES -MASACRIL®
Masacril® is a high quality range of acrylic fabrics that gives an excellent performance in many applications in the nautical sector. Its excellent properties: long life, great resistance to UV radiation, permeability to air and watertightness, anti-mould properties, light weight, ease of maintenance and solution dyed Masacril® acrylic, make it the fabric of choice. For over thirty years there has been no other fabric that can compare. The very durable waterproof coating ensures a water column of more than 1000 mm and excellent shape holding; still, there is enough stretch in the fabric so that a canopy can be pulled effortlessly to the attachments and has enough stability to prevent sagging.
Specifications: Acryl-coated
Material: 100% acrylic
Construction: warp 31 yarns/cm fill 15 yarns/cm
Tensile strength: warp 140 daN/5 cm fill 95 daN/5 cm
Weight: 330 gr/m2
Water column: 1000 mm
Finish: Teflon/fluor carbon
Width: 153 cm
Roll length: 50 meter
Index
121
Product Catalogue 2018 - 2019 • Contender B.V.
Fabrics
SAULEDA MASACRIL COATED ACRYL FABRIC
COLOUR COLOUR CODE COLOUR COLOUR CODE
Azul 2401 Grafito 2466
Beige 2403 Pink 2469
Blanco 2405 Regata 2470
Granate 2407 Tweed Gris Claro 2471
Silver 2409 Botella 2488
Racing 2410 Tweed Azul 2660
Marfil 2411 Tweed Verde 2710
Marino 2413 Tweed Rojo 2718
Marron 2415 Tweed Avena 2719
Perla 2417 Rioja 2729
Brisa 2418 Verde 2742
Rojo 2419 Tweed Midnightblue 2743
Gris 2421 Indigo 2746
Azul Reaal 2423 Mineral 2750
Cafe 2442 Purpura 2752
Integral 2443 Negro 2881
Armada 2448 Commodore 3554
Admiral Navy 2449 Optik 3589
Avena 2451 Piedra 3599
Vison 2452 Naranja 8250
Seda 2453 Amarillo 8634
Aquamarina 2460 Vanilla 8668
Antracita 2461 Teja 8733
Tweed Negro 2463 Carbon / Coal 8860
Coco 3597
* Surcharge for orders under 5 meters.
MASACRIL® BIAS BINDING 20MMon 50 m rolls
PART NO.
HMABBXXXX XXX is color
HWM1650-1022 Suisei binder 22mm
Index
122
Telephone: +31 (0)297 237575 • [email protected]
Fabrics
MASACRIL TAPE
PART NO. WIDTH MM COLOUR
HMATAP2403 20 Beige
HMATAP2405 20 Blanco
HMATAP2407 20 Granata
HMATAP2411 20 Marfil
HMATAP6932 20 Contender Blue
HMATAP2417 20 Perla
HMATAP2442 20 Cafe
HMATAP2449 20 Adm.Navy
HMATAP2452 20 Vison
HMATAP2461 20 Antracita
HMATAP2881 20 Negro
HMATAP8860 20 Carbon
SAULEDA NAUTIC MASACRIL® DECK & DECK PRODeck & Deck Pro concerns the last addition to the Sauleda cloth range. With a weight of only 320 gr / m2 and a laminated interior, the fabric is extremely suitable for covers and other cover applications. Available on rolls of 50 meters with a width of 220 cm.
ARTICLE COLOUR COLOUR CODE
HMADECK6010 Pro Marino - Carbon Look 6010
HMADECK6011 Pro Negro - Carbon Look 6011
HMADECK6991 Perla 6991
HMADECK6992 Gris Naval 6992
HMADECK6993 Arena 6993
HMADECK6995 Marino 6995
HMADECK6998 Negro 6998
SAULEDA NAUTIC MASACRIL® DECK & DECK PRODeck is the new luxury range fabric collection for nautical applications.
It is manufactured using the latest fabric structure techniques, wich considerably increases the fabric’s mechanical resistance.
The upper side of the fabric is coated with PVC using a special formulation that gives it unparalleled properties in marine environments.
Deck is supplied in two finishes:
Deck with a slightly raised grain print.
Deck Pro wich has a trend type print and a more pronouced relief in keeping with new market trends.
Index
123
Product Catalogue 2018 - 2019 • Contender B.V.
Fabrics
SAULEDA NAUTIC PORTSauleda is producing a PVC coated fabric specially developed for the marine environment. Port has a leather-like imprint on one side. Port has a long life, great resistance to UV, solid colours and total water tightness and is mould treated.
PORT COLOUR CODE COLOUR
HMAPOR6931 6931 Blanco
HMAPOR6920 6920 Hueso
HMAPOR6921 6921 Marfil
HMAPOR6922 6922 Avena
HMAPOR6927 6927 Naranja
HMAPOR6929 6929 Granate
HMAPOR6925 6925 Botella
HMAPOR6926 6926 Azul Real
HMAPOR6932 6932 Contender Blue
HMAPOR6923 6923 Silver
HMAPOR6928 6928 Grafito
HMAPOR6930 6930 Negro
* Surcharge for orders under 5 meters
PORT
Fabric Poly 280 dtex
Coating PVC 2 sided
Weight (gr/m2) 400
Thickness(mm) 0.35
Tear warp x fill 13 daN x 10 daN
Temperature 0C -30 tm +70
Roll length 50
Width (cm) 220
SAULEDA PORT PVC BAND 20 MMon 50 m rolls
PART NO. COLOUR
HMAPOR6921-20MM Marfil
HMAPOR6922-20MM Avena
HMAPOR6932-20MM Contender Blue
HMAPOR6928-20MM Grafito
HMAPOR6929-20MM Granata
HMAPOR6930-20MM Negro
HMAPOR6931-20MM Blanco
Index
124
Telephone: +31 (0)297 237575 • [email protected]
Fabrics
SAULEDA PORT TAPESold per roll (50M)
PART NO. COLOUR WIDTH MM
HMAPOR6921-20mm Marfil 20
HMAPOR6922-20mm Avena 20
HMAPOR6828-20mm Grafito 20
HMAPOR6929-20mm Granata 20
HMAPOR6930-20mm Negro 20
HMAPOR6931-20mm Blanco 20
HMAPOR6932-20mm Contender blue 20
NYLON SAILBAG FABRICQuality Nylon fabric with good tensile strength, light permeable PU-finish on one side (sewing finish), not waterproof, 420 den x 420 den, ca. 180 g/m2, width 150 cm, roll length 100 m (also sold by metre, cutting fee applicable)
PART NO. COLOUR
HKZ10 White
HKZ13 Red
HKZ28 Gold
HKZ29 Yellow
HKZ49 Green
HKZ66 Dark Blue
HKZ69 Medium Blue
HKZ77 Navy Blue
HKZ95 Dark Grey
HKZ94 Grey
HKZ99 Black
Coloured woven cloth can stain under certain circumstances! Please make sure that sails in their sailbag are not stored for longer periods under damp conditions.
Index
125
Product Catalogue 2018 - 2019 • Contender B.V.
Fabrics
PVC WINDOW FILM WITH UV PROTECTIONOnly on full rolls
ARTICLE LENGTH THICKNESS WIDTH CM
HFF050 25 0.5 137
HFF050-50 50 0.5 137
HFF050-WW 30 0.5 180
HFF065 30 0.65 137
HFF075 30 0.75 137
HFF050-FR 50 0.50 137
CLEAR MYLAR FILMMonoFilm Only full 25 m rolls, AX sold by metre
PART NO. DESCRIPTION WIDTH CM
HPSG100125C Monofilm 5.0 mil 150
HPSG100175C Monofilm 7.0 mil 150
HPSG100250C Monofilm 10.0 mil 150
HAX 04 Film with X-ply 4.0 mil 137
TRAMPOLINE FABRICWeight 290 gr/m2, width 190 cm, roll length 100m, (also sold by metre, a cutting fee will be charged)
PART NO. COLOUR
HTRAMPO G Grey
HTRAMPO B Black
Index
Terms of Trading
ww
w.c
onte
nder
-tt.
com
Product Catalogue 2018 - 2019 • Contender B.V.
129Terms of Trading
StatusThese terms of trading are a summary of the terms registered at the Chamber of Commerce in Utrecht, the Netherlands, under number 2405. No modification, alteration or amendment of any of the provisions of these terms of trading shall be valid unless in writing and signed by Contender B.V.
PricesAll quoted prices are net FOB from our warehouses in The Netherlands, and/or K.B.C. Germany and are exclusive of VAT. All prices are subject to change without notice.
PaymentInvoices are dated as per the day of despatch of the goods. We retain ownership of the goods supplied until full payment has been received in accordance with the set payment terms.
Overdue AccountsDespatch of new orders may be withheld where accounts are overdue. Interest may be applied to overdue accounts on a monthly basis from the due date until the date of receipt of payment. The interest rate is 1½% per month. Any portion of a month shall count as a full month.
Method of DeliveryThe customer should specify whether “regular” or “express” delivery service is required. If neither is specified we will assume that regular service applies.
Where regular delivery is specified, despatch will be made by post provided weight and size permitting, or alternatively by normal road or air carrier.
ReturnsGoods may be returned by prior arrangement. Any goods returned for credit must be delivered to our warehouse within 60 days of invoice date.
LiabilityAll materials sold by Contender have been specifically developed for the manufacturing of sails and/or other marine associated applications. Contender can not be held liable if their products are used otherwise.
Product liability is restricted to the value of the specific item delivered by Contender.
All further liabilities are excluded.
Index
Product Catalogue 2018 - 2019 • Contender B.V.
131
Index
Contender B.V.
Nijverheidsweg 17 A/B3641 RP Mijdrecht
PO Box 2093640 AE MijdrechtThe Netherlands
Phone: +31 (0)297 237575Fax : +31 (0)297 281670