PRODUCT CATALOGUE

Structural & Decorative Tube Bar & Sections Seamless Tube Hygienic Tube Structural &Decorative Tube Aluminium Butt Weld Fittings Hygienic Fittings Architectural Stainless SteelRolled Products Mirror Polished Fittings Setting Industry Standards MIC 6 Rolled ProductsStainless Steel Welded Mesh Seamless Pipe Welded Pipe Brass Seamless Butt Weld FittingsWelded Butt Weld Fittings Yellow Metals Fittings Seamless Butt Weld Fittings Stainless SteelCopper Structural & Decorative Tube Hygienic Tube Sign & Display Materials Seamless TubeHygienic Tube Glazing Bar Flanges Fittings Rolled Products Nationwide Supply SolutionsWelded Pipe Circle Polish Welded Mesh Nationwide Supply Solutions Welded Pipe CirclePolish MIC 6 Butt Weld Fittings Bar & ctions Welded Mesh Rolled Products PipeSeamless Butt Weld Fittings Welded Pipe Welded Butt Weld Fittings Flanges Seamless TubeMirror Polish Fixtures & Fittings Hygienic Tube Stainless Steel Nationwide Supply SolutionsHygienic Fittings The Perfect Choice Bar & Sections Yellow Metals Welded Mesh MirrorPolish Aluminium Circle Polish Architectural Rolled Products Seamless Pipe BronzeSeamless Butt Weld Fittings Welded Butt Weld Fittings Welded Pipe Flanges Seamless TubeCircle Polish Hygienic Tube Mirror Polish Glazing Bar Structural & Decorative Tube BrassSign & Display Materials Seamless Tube Hygienic Tube Bar & Sections Butt Weld FittingsSeamless Tube Flanges Hygienic Fittings Fittings Rolled Products Welded Pipe Circle PolishMirror Polished Bronze MIC 6 Nationwide Supply Solutions Fixtures & Fittings Copper Bar& Sections Seamless Tube Hygienic Tube Structural & Decorative Tube Aluminium Butt WeldFittings Hygienic Fittings Architectural Stainless Steel Rolled Products Mirror PolishedFittings Setting Industry Standards MIC 6 Rolled Products Stainless Steel Welded MeshSeamless Pipe Welded Pipe Brass Seamless Butt Weld Fittings Welded Butt Weld Fittings

Product Catalogue

BLACKBURNS METALS LIMITED

Design and artwork by: www.digitalegg.net

Image courtesy of Princess Yachts International plc.

Our vision...

To be the premier supplier within our chosen marketswith a reputation for service, quality and innovation

1PRODUCT CATALOGUE

Contents

ALUMINIUM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

STAINLESS STEEL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30

YELLOW METALS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .68

SIGN & DISPLAY MATERIALS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .82

ARCHITECTURAL / SURFACE DESIGN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .108

FIXTURES & FITTINGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .118

GLAZING BAR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .146

ABOUT BLACKBURNS METALS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .152

Nationwide supply solutions for Aluminium,Stainless Steel and Non-Ferrous Alloys...

This product guide is a comprehensive listing of all the products and services availablefrom your local Blackburns Sales and Distribution Centre.

Our vast product range, fabrication and distribution services constantly evolve andinclude many specialist and bespoke products aimed at general and specialist markets.

If you require any further information, a quotation or technical advice, please contactyour local Blackburns or email [email protected].

Contact your local Blackburns today...(see back cover for location and contact details)

2 www.blackburnsmetals .com

3ALUMINIUM - Nationwide Supply Solutions...

BAR & SECTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

LADDER RUNG, MICROLIGHT TUBE, TUBE, SCAFFOLD TUBE . . . . . . . . . . . . . . . . . . . . . . . . . .7

CHANNEL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9

TEE SECTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

EQUAL ANGLE, METRIC ANGLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

UNEQUAL ANGLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

Z SECTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

MOULDINGS - GUTTER SECTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

MOULDINGS - COPE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

MOULDINGS - FLUTED EDGINGS & NOSINGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

MOULDINGS SECTIONS - DFE, HRM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15

WALLBOARD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16

MISCELLANEOUS SECTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18

HANGING Z SECTION, CARAVAN AWNING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19

SHEET - ALLOYS: 1050, 5083 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20

SHEET - OTHER ALLOYS, WHITE PAINTED, PRE-ANODISED . . . . . . . . . . . . . . . . . . . . . . . . . .21

PATTERNED SHEET . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22

SHATE & PLATE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23

CUT PLATE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24

ALUMINIUM CIRCLES - QUARTER HARD CIRCLES, SOFT CIRCLES . . . . . . . . . . . . . . . . . . . . .26

COIL PROCESSING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28

ANODISED COIL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29


Blackburns Aluminium...

Aluminium is the most plentiful element in the earths crust and with the high proportionof recycling; reserves of the metal are never likely to be depleted.

Some of the greatest technical developments over the past century since aluminiumbecame commercially available have centred around, or been enabled by, aluminium.

Some of the benefits in using aluminium include high strength to low weight ratio,formability, corrosion resistant, good conductivity of heat and electricity, does not burn,environmentally friendly as it is fully recyclable.

4 BLACKBURNS METALS LIMITED

Round BarALLOYS: 6082-T6

2011-T3/T6, 6262-T9

Dia Weight(in) per metre (Kg)

1⁄4 0.095⁄16 0.133⁄8 0.197⁄16 0.261⁄2 0.349⁄16 0.435⁄8 0.5416mm 0.5411⁄16 0.653⁄4 0.7720mm 0.8513⁄16 0.917⁄8 1.051 1.3711⁄8 1.7411⁄4 2.1515⁄16 2.3713⁄8 2.6035mm 2.6117⁄16 2.8411⁄2 3.0915⁄8 3.6313⁄4 4.2117⁄8 4.832 5.4921⁄8 6.2021⁄4 6.9523⁄8 7.7521⁄2 8.58

Dia Weight(in) per metre (Kg)

25⁄8 9.4623⁄4 10.43 12.431⁄4 14.531⁄2 16.833⁄4 19.34 22.041⁄4 24.841⁄2 27.843⁄4 31.05 34.351⁄4 37.851⁄2 41.553⁄4 45.46 49.461⁄2 58.07 67.371⁄4 72.271⁄2 77.28 87.981⁄2 99.29 11191⁄2 12410 13712 19813 23214 26915 30916 352

5Aluminium - EXTRUSIONS

Size Weight(in) per metre (Kg)

3⁄8 x 1⁄8 0.083⁄8 x 1⁄4 0.161⁄2 x 1⁄16 0.061⁄2 x 1⁄8 0.111⁄2 x 3⁄16 0.161⁄2 x 1⁄4 0.221⁄2 x 3⁄8 0.335⁄8 x 1⁄8 0.145⁄8 x 3⁄16 0.205⁄8 x 1⁄4 0.275⁄8 x 3⁄8 0.415⁄8 x 1⁄2 0.553⁄4 x 1⁄16 0.083⁄4 x 1⁄8 0.163⁄4 x 3⁄16 0.253⁄4 x 1⁄4 0.333⁄4 x 3⁄8 0.493⁄4 x 1⁄2 0.663⁄4 x 5⁄8 0.827⁄8 x 1⁄8 0.191 x 1⁄16 0.111 x 1⁄8 0.221 x 3⁄16 0.331 x 1⁄4 0.441 x 5⁄16 0.541 x 3⁄8 0.661 x 1⁄2 0.871 x 5⁄8 1.091 x 3⁄4 1.3111⁄4 x 1⁄8 0.2711⁄4 x 3⁄16 0.4111⁄4 x 1⁄4 0.5511⁄4 x 3⁄8 0.8211⁄4 x 1⁄2 1.0911⁄4 x 5⁄8 1.3711⁄4 x 3⁄4 1.6411⁄4 x 1 2.1911⁄2 x 1⁄16 0.1611⁄2 x 1⁄8 0.3311⁄2 x 3⁄16 0.4911⁄2 x 1⁄4 0.6611⁄2 x 3⁄8 0.98


11⁄2 x 1⁄2 1.3111⁄2 x 5⁄8 1.6411⁄2 x 3⁄4 1.9711⁄2 x 1 2.6211⁄2 x 11⁄4 3.2813⁄4 x 1⁄8 0.3813⁄4 x 1⁄4 0.7613⁄4 x 3⁄8 1.1513⁄4 x 1⁄2 1.5313⁄4 x 3⁄4 2.2913⁄4 x 1 3.0613⁄4 x 11⁄4 3.822 x 1⁄8 0.442 x 3⁄16 0.662 x 1⁄4 0.872 x 3⁄8 1.312 x 1⁄2 1.752 x 5⁄8 2.192 x 3⁄4 2.622 x 1 3.502 x 11⁄4 4.372 x 11⁄2 5.2521⁄2 x 1⁄8 0.5521⁄2 x 3⁄16 0.8221⁄2 x 1⁄4 1.0921⁄2 x 3⁄8 1.6421⁄2 x 1⁄2 2.1921⁄2 x 3⁄4 3.2821⁄2 x 1 4.3721⁄2 x 11⁄2 6.5621⁄2 x 2 8.743 x 1⁄8 0.663 x 3⁄16 0.983 x 1⁄4 1.313 x 3⁄8 1.973 x 1⁄2 2.623 x 5⁄8 3.283 x 1 5.253 x 2 10.5031⁄2 x 1⁄4 1.5231⁄2 x 1⁄2 3.04continued on next page...

Flat BarALLOYS: 6082-T6

6063-T6, 6063A-T6



4 x 1⁄8 0.874 x 3⁄16 1.304 x 1⁄4 1.754 x 3⁄8 2.624 x 1⁄2 3.504 x 5⁄8 4.374 x 3⁄4 5.254 x 1 6.994 x 11⁄4 8.74


4 x 2 14.005 x 1⁄4 2.195 x 1⁄2 4.376 x 1⁄8 1.316 x 1⁄4 2.626 x 3⁄8 3.936 x 1⁄2 5.256 x 1 10.50


1⁄4 0.115⁄16 0.173⁄8 0.251⁄2 0.445⁄8 0.683⁄4 0.987⁄8 1.341 1.75


11⁄4 2.7311⁄2 3.9313⁄4 5.352 6.9921⁄2 10.903 15.7031⁄2 21.404 28.00

Flat Bar(continued...)

ALLOYS: 6082-T6

6063-T6, 6063A-T6

Square BarALLOY: 6082-T6


1⁄2 x 1⁄2 x 16 swg 0.203⁄4 x 3⁄4 x 16 swg 0.313⁄4 x 3⁄4 x 10 swg 0.561 x 1 x 16 swg 0.421 x 1 x 10 swg 0.7811⁄4 x 11⁄4 x 16 swg 0.5311⁄4 x 11⁄4 x 10 swg 1.0011⁄2 x 11⁄2 x 16 swg 0.6411⁄2 x 11⁄2 x 10 swg 1.23


13⁄4 x 11⁄4 x 10 swg 1.452 x 2 x 16 swg 0.872 x 2 x 10 swg 1.682 x 2 x 1⁄4 swg 3.0621⁄2 x 21⁄2 x 10 swg 2.123 x 3 x 10 swg 2.574 x 4 x 10 swg 3.474 x 4 x 1⁄4 swg 6.56

Box SectionSQUARE

ALLOYS: 6063-T6, 6082-T6

Metric Box SectionALLOY: 6065

Size Weight(mm) per metre (Kg)

50 x 50 x 3.0 1.53



1 x 1⁄2 x 16 swg 0.3111⁄2 x 3⁄4 x 16 swg 0.4811⁄2 x 1 x 16 swg 0.5211⁄2 x 1 x 10 swg 1.002 x 1 x 10 swg 1.222 x 11⁄2 x 10 swg 1.343 x 1 x 10 swg 1.673 x 11⁄2 x 10 swg 1.90


3 x 13⁄4 x 10 swg 2.013 x 2 x 10 swg 2.114 x 1 x 10 swg 2.124 x 13⁄4 x 10 swg 2.454 x 2 x 10 swg 2.566 x 2 x 10 swg 3.406 x 3 x 3⁄8 swg 10.80

Box SectionRECTANGULAR

ALLOYS: 6063-T6, 6082-T6


1 x 10 swg 0.59

Ladder RungALLOY: 6082-T6


17⁄8 o/d x 17 swg 0.562 o/d x 17 swg 0.6021⁄8 o/d x 17 swg 0.6421⁄4 o/d x 17 swg 0.6721⁄2 o/d x 17 swg 0.7525⁄8 o/d x 17 swg 0.79


1⁄2 o/d x 20 swg 0.091 o/d x 17 swg 0.2911⁄8 o/d x 17 swg 0.3311⁄8 o/d x 16 swg 0.3811⁄8 o/d x 13 swg 0.5315⁄8 o/d x 17 swg 0.4813⁄4 o/d x 17 swg 0.52

Microlight TubeALLOY: 6082-T6



3⁄8 o/d x 16 swg 0.111⁄2 o/d x 18 swg 0.121⁄2 o/d x 16 swg 0.151⁄2 o/d x 10 swg 0.265⁄8 o/d x 18 swg 0.155⁄8 o/d x 16 swg 0.205⁄8 o/d x 10 swg 0.353⁄4 o/d x 18 swg 0.193⁄4 o/d x 16 swg 0.243⁄4 o/d x 10 swg 0.447⁄8 o/d x 18 swg 0.227⁄8 o/d x 16 swg 0.297⁄8 o/d x 10 swg 0.531 o/d x 18 swg 0.251 o/d x 16 swg 0.331 o/d x 10 swg 0.611 o/d x 3⁄16 0.8311⁄8 o/d x 18 swg 0.2811⁄8 o/d x 16 swg 0.3711⁄8 o/d x 10 swg 0.7011⁄4 o/d x 18 swg 0.3211⁄4 o/d x 16 swg 0.4211⁄4 o/d x 12 swg 0.6511⁄4 o/d x 10 swg 0.7911⁄4 o/d x 3⁄16 1.0813⁄8 o/d x 16 swg 0.4613⁄8 o/d x 10 swg 0.8811⁄2 o/d x 18 swg 0.3811⁄2 o/d x 16 swg 0.5011⁄2 o/d x 10 swg 0.9611⁄2 o/d x 3⁄16 1.3511⁄2 o/d x 1⁄4 1.7115⁄8 o/d x 16 swg 0.5515⁄8 o/d x 10 swg 1.0515⁄8 o/d x 3⁄16 1.48


13⁄4 o/d x 16 swg 0.5913⁄4 o/d x 10 swg 1.1417⁄8 o/d x 10 swg 1.232 o/d x 16 swg 0.682 o/d x 14 swg 0.842 o/d x 10 swg 1.322 o/d x 3⁄16 1.862 o/d x 1⁄4 2.3921⁄4 o/d x 16 swg 0.7721⁄4 o/d x 10 swg 1.4921⁄2 o/d x 16 swg 0.8621⁄2 o/d x 10 swg 1.6721⁄2 o/d x 3⁄16 2.3821⁄2 o/d x 1⁄4 3.0821⁄2 o/d x 3⁄8 4.3623⁄4 o/d x 10 swg 1.843 o/d x 16 swg 1.033 o/d x 12 swg 1.653 o/d x 10 swg 2.023 o/d x 3⁄16 2.903 o/d x 1⁄4 3.7631⁄2 o/d x 16 swg 1.2131⁄2 o/d x 10 swg 2.3731⁄2 o/d x 1⁄4 4.464 o/d x 16 swg 1.384 o/d x 12 swg 2.234 o/d x 10 swg 2.724 o/d x 1⁄4 5.1541⁄2 o/d x 10 swg 3.0741⁄2 o/d x 1⁄4 5.835 o/d x 10 swg 3.435 o/d x 1⁄4 6.5251⁄2 o/d x 1⁄4 7.216 o/d x 10 swg 4.136 o/d x 1⁄4 7.9061⁄2 o/d x 1⁄4 8.58

TubeALLOYS: 6082-T6

6063-T6, 6063A-T6

Scaffold Tube20FT LENGTH


129⁄32 o/d x 7 swg 1.53



3⁄8 x 3⁄8 x 1⁄16 0.111⁄2 x 1⁄2 x 1⁄16 0.061⁄2 x 1⁄2 x 1⁄8 0.275⁄8 x 5⁄8 x 1⁄16 0.195⁄8 x 5⁄8 x 1⁄8 0.363⁄4 x 1⁄2 x 1⁄8 0.443⁄4 x 3⁄4 x 1⁄16 0.243⁄4 x 3⁄4 x 1⁄8 0.497⁄8 x 7⁄8 x 1⁄8 0.521 x 1⁄2 x 1⁄8 0.381 x 3⁄4 x 1⁄8 0.491 x 1 x 1⁄16 0.311 x 1 x 1⁄8 0.601 x 1 x 3⁄16 0.8611⁄8 x 3⁄4 x 1⁄8 0.5211⁄8 x 1 x 1⁄8 0.6311⁄8 x 11⁄8 x 1⁄8 0.6811⁄4 x 1⁄2 x 1⁄8 0.4411⁄4 x 3⁄4 x 1⁄8 0.5511⁄4 x 1 x 1⁄8 0.6611⁄4 x 11⁄4 x 1⁄16 0.3911⁄4 x 11⁄4 x 1⁄8 0.7611⁄4 x 11⁄4 x 3⁄16 1.1011⁄2 x 1⁄2 x 1⁄8 0.4911⁄2 x 3⁄4 x 1⁄8 0.6011⁄2 x 1 x 1⁄8 0.7111⁄2 x 11⁄2 x 1⁄8 0.9311⁄2 x 11⁄2 x 1⁄4 1.7413⁄4 x 1 x 1⁄8 0.7613⁄4 x 13⁄4 x 1⁄8 1.0913⁄4 x 13⁄4 x 1⁄4 2.07


2 x 1⁄2 x 1⁄8 0.602 x 3⁄4 x 1⁄8 0.712 x 1 x 1⁄8 0.822 x 1 x 3⁄16 1.222 x 1 x 1⁄4 1.522 x 11⁄2 x 1⁄8 1.032 x 11⁄2 x 1⁄4 1.972 x 2 x 1⁄8 1.262 x 2 x 3⁄16 1.832 x 2 x 1⁄4 2.4021⁄4 x 11⁄4 x 3⁄16 1.4321⁄2 x 1 x 1⁄8 0.9321⁄2 x 11⁄4 x 3⁄16 1.523 x 1 x 1⁄8 1.043 x 11⁄2 x 1⁄8 1.263 x 11⁄2 x 3⁄16 1.843 x 11⁄2 x 1⁄4 x 5⁄16 2.663 x 2 x 1⁄8 1.483 x 2 x 3⁄16 2.173 x 2 x 1⁄4 2.8431⁄2 x 11⁄2 x 1⁄4 x 5⁄16 2.904 x 2 x 1⁄8 1.694 x 2 x 3⁄16 2.504 x 2 x 1⁄4 x 5⁄16 3.665 x 2 x 1⁄4 x 5⁄16 4.246 x 2 x 1⁄4 x 5⁄16 4.536 x 3 x 1⁄4 x 3⁄8 6.216 x 3 x 3⁄8 x 1⁄2 8.498 x 3 x 3⁄8 x 1⁄2 9.8010 x 3 x 3⁄8 x 1⁄2 11.33

ChannelALLOYS: 6082-T6

6063-T6, 6063A-T6

Dimensions are in the order:base x leg x base thicknessx leg thickness



3⁄8 x 3⁄8 x 1⁄16 0.081⁄2 x 1⁄2 x 1⁄16 0.101⁄2 x 1⁄2 x 1⁄8 0.195⁄8 x 5⁄8 x 1⁄16 0.135⁄8 x 5⁄8 x 1⁄8 0.253⁄4 x 3⁄4 x 1⁄16 0.163⁄4 x 3⁄4 x 1⁄8 0.307⁄8 x 7⁄8 x 1⁄8 0.361 x 1 x 1⁄16 0.211 x 1 x 1⁄8 0.411 x 1 x 3⁄16 0.591 x 1 x 1⁄4 0.7611⁄8 x 11⁄8 x 1⁄8 0.4611⁄4 x 11⁄4 x 1⁄16 0.2711⁄4 x 11⁄4 x 1⁄8 0.5211⁄4 x 11⁄4 x 3⁄16 0.7611⁄4 x 11⁄4 x 1⁄4 0.9811⁄2 x 11⁄2 x 1⁄16 0.3211⁄2 x 11⁄2 x 1⁄8 0.6311⁄2 x 11⁄2 x 3⁄16 0.92


11⁄2 x 11⁄2 x 1⁄4 1.2013⁄4 x 13⁄4 x 1⁄8 0.7413⁄4 x 13⁄4 x 3⁄16 1.0913⁄4 x 13⁄4 x 1⁄4 1.422 x 2 x 1⁄16 0.432 x 2 x 1⁄8 0.852 x 2 x 3⁄16 1.252 x 2 x 1⁄4 1.642 x 2 x 3⁄8 2.3821⁄2 x 21⁄2 x 1⁄8 1.0621⁄2 x 21⁄2 x 3⁄16 1.5821⁄2 x 21⁄2 x 1⁄4 2.0821⁄2 x 21⁄2 x 3⁄8 3.033 x 3 x 1⁄8 1.283 x 3 x 3⁄16 1.913 x 3 x 1⁄4 2.513 x 3 x 3⁄8 3.694 x 4 x 1⁄4 3.394 x 4 x 3⁄8 5.006 x 6 x 1⁄2 10.00

Tee SectionALLOYS: 6082-T6

6063A-T6

Equal AngleALLOYS: 6082-T6

6063-T6, 6063A-T6

Metric AngleALLOY: 6063


1⁄2 x 1⁄2 x 1⁄16 0.103⁄4 x 3⁄4 x 0.08 0.203⁄4 x 3⁄4 x 1⁄8 0.301 x 1 x 1⁄16 0.211 x 1 x 1⁄8 0.4111⁄4 x 11⁄4 x 1⁄8 0.5211⁄2 x 11⁄2 x 1⁄8 0.6311⁄2 x 11⁄2 x 3⁄16 0.92


11⁄2 x 11⁄2 x 1⁄4 1.202 x 1 x 1⁄8 0.632 x 2 x 1⁄8 0.852 x 2 x 3⁄16 1.252 x 2 x 1⁄4 1.643 x 3 x 1⁄4 2.513 x 3 x 3⁄8 3.69

Dimensions: cross piece x height x thickness

Size Weight(mm) per metre (Kg)

25 x 25 x 3 0.3950 x 50 x 3 0.7950 x 25 x 3 0.59



3⁄4 x 1⁄4 x 1⁄16 0.103⁄4 x 3⁄8 x 1⁄16 0.123⁄4 x 1⁄2 x 1⁄16 0.133⁄4 x 1⁄2 x 1⁄8 0.251 x 1⁄2 x 1⁄16 0.151 x 1⁄2 x 1⁄8 0.301 x 5⁄8 x 1⁄8 0.331 x 3⁄4 x 1⁄16 0.181 x 3⁄4 x 1⁄8 0.3611⁄4 x 1⁄2 x 1⁄8 0.3611⁄4 x 3⁄4 x 1⁄8 0.4111⁄4 x 1 x 1⁄8 0.4711⁄2 x 1⁄2 x 1⁄8 0.4111⁄2 x 3⁄4 x 1⁄8 0.4611⁄2 x 1 x 1⁄16 0.2711⁄2 x 1 x 1⁄8 0.5213⁄4 x 3⁄4 x 1⁄8 0.5213⁄4 x 7⁄8 x 1⁄8 0.5513⁄4 x 1 x 1⁄8 0.572 x 1⁄2 x 1⁄8 0.522 x 3⁄4 x 1⁄8 0.572 x 1 x 1⁄8 0.632 x 1 x 3⁄16 0.92


2 x 1 x 1⁄4 1.202 x 11⁄2 x 1⁄8 0.742 x 11⁄2 x 3⁄16 1.092 x 11⁄2 x 1⁄4 1.4221⁄2 x 1 x 1⁄8 0.7321⁄2 x 11⁄2 x 1⁄8 0.8521⁄2 x 11⁄2 x 3⁄16 1.2521⁄2 x 11⁄2 x 1⁄4 1.6421⁄2 x 2 x 1⁄4 1.863 x 1 x 1⁄8 0.853 x 1 x 1⁄4 1.643 x 11⁄2 x 1⁄8 0.963 x 11⁄2 x 3⁄16 1.403 x 11⁄2 x 1⁄4 1.863 x 2 x 1⁄8 1.073 x 2 x 3⁄16 1.583 x 2 x 1⁄4 2.084 x 1 x 1⁄8 1.064 x 2 x 1⁄8 1.294 x 2 x 1⁄4 2.514 x 3 x 1⁄4 2.955 x 2 x 1⁄4 2.926 x 3 x 3⁄8 5.63

Dimensions: height x legs x thickness

Unequal AngleALLOYS: 6082-T6

6063-T6, 6063A-T6

Ref. Size Weight(in) per metre (Kg)

No.921 11⁄8 x 3⁄4 x 1⁄8 0.52No.940 13⁄4 x 1 x 1⁄8 0.82No.941 11⁄4 x 1 x 1⁄8 0.67No.942 1 x 3⁄4 x 3⁄32 0.39No.943 3⁄4 x 1⁄2 x 1⁄16 0.18

Z SectionALLOY: 6063-T6


MouldingsGUTTER SECTIONS

8 2250.131 kg/m 0.129 kg/m

455 4660.275 kg/m 0.259 kg/m

5820.205 kg/m


MouldingsCOPE

84 3060.237 kg/m 0.219 kg/m

760 7670.228 kg/m 0.348 kg/m

794 8090.421 kg/m 0.302 kg/m

903 905 9060.089 kg/m 0.281 kg/m 0.232 kg/m


MouldingsFLUTED EDGINGS

& NOSINGS

36 2490.167 kg/m 0.237 kg/m

5270.247 kg/m

6730.455 kg/m

7480.491 kg/m

7860.368 kg/m


MouldingsHALF ROUND SECTIONS

MouldingsDOUBLE FEATHERED

SECTIONS

MouldingsCORNER SECTIONS

MouldingsLAP PLATE SECTIONS

730 9320.207 kg/m 0.217 kg/m

Half Round

Double Feather Edge

9000.418 kg/m


5⁄8 x 3⁄16 0.1283⁄4 x 3⁄16 0.1461 x 3⁄16 0.153


11⁄4 x 3⁄16 0.21011⁄2 x 3⁄16 0.2502 x 1⁄4 0.445


1 x 1⁄8 0.20711⁄4 x 1⁄8 0.26211⁄2 x 1⁄8 0.318


WallboardSections

FOR 1/8” BOARD

WallboardSections

FOR 3/16” BOARD

WallboardSections

FOR 1/4” BOARD

1⁄8” 1⁄8”

Continual Run End Stop

3⁄16”

Continual Run

3⁄16”

End Stop

1⁄4” 1⁄4”



WallboardSectionsFOR 1/2” BOARD

WallboardSectionsFOR 3/4” BOARD

WallboardSectionsFOR 1” BOARD

1⁄2” 1⁄2”


1⁄2” 1⁄2”

External Corner Internal Corner

1142 9533⁄4” 3⁄4”


1143 1144

1” 1”



MiscellaneousSections

924 926 9270.179 kg/m 0.394 kg/m 0.271 kg/m

807 855 8570.506 kg/m 0.271 kg/m 0.167 kg/m

733 734 8060.190 kg/m 0.210 kg/m 0.381 kg/m


MiscellaneousSections

928 929 952 9720.430 kg/m 0.368 kg/m 0.176 kg/m 0.506 kg/m

936 GM2040.298 kg/m

Hanging Z Section

Caravan Awning


Size Weight(mm) per sheet (Kg)

2000 x 1000 x 0.5 2.712500 x 1250 x 0.5 4.232000 x 1000 x 0.6 3.252500 x 1250 x 0.6 5.082000 x 1000 x 0.8 4.342500 x 1250 x 0.8 6.782000 x 1000 x 1.0 5.422500 x 1250 x 1.0 8.473000 x 1250 x 1.0 10.202000 x 1000 x 1.2 6.502500 x 1250 x 1.2 10.203000 x 1250 x 1.2 12.203000 x 1500 x 1.2 14.602000 x 1000 x 1.5 8.132500 x 1250 x 1.5 12.703000 x 1250 x 1.5 15.203000 x 1500 x 1.5 18.302000 x 1000 x 2.0 10.802500 x 1250 x 2.0 16.90


3000 x 1000 x 2.0 16.303000 x 1250 x 2.0 20.303000 x 1500 x 2.0 24.404000 x 1000 x 2.0 21.734000 x 1250 x 2.0 27.174000 x 1500 x 2.0 32.604000 x 2000 x 2.0 43.792000 x 1000 x 2.5 13.602500 x 1250 x 2.5 21.203000 x 1500 x 2.5 30.502000 x 1000 x 3.0 16.302500 x 1250 x 3.0 25.403000 x 1000 x 3.0 24.403000 x 1250 x 3.0 30.503000 x 1500 x 3.0 36.604000 x 1000 x 3.0 32.534000 x 1250 x 3.0 40.664000 x 1500 x 3.0 48.804000 x 2000 x 3.0 65.00

SheetALLOY: 1050A-H14

SheetALLOY: 5083


2500 x 1250 x 1.5 12.72500 x 1250 x 2.0 16.92500 x 1250 x 3.0 25.4

21Aluminium - ROLLED PRODUCTS


2500 x 1250 x 1.5 12.72500 x 1250 x 2.0 16.92500 x 1250 x 3.0 25.4

Pre-AnodisedSheet


2500 x 1250 x 0.7 5.92500 x 1250 x 0.9 7.62500 x 1250 x 1.0 8.53000 x 1500 x 1.0 12.3


2500 x 1250 x 1.2 10.22500 x 1250 x 1.5 12.83000 x 1500 x 1.5 18.52500 x 1250 x 1.8 15.6

SheetWhite Painted3105-H46 / 3003-H45

FULL WHITE GLOSS

CLEAR WASH COAT

LACQUER REVERSE

50 MICRON POLYCOATED

Size Alloys > 5251-H22 3103-H14 4015-H12 6082-T6(mm)

2000 x 1000 x 1.0 � �

2500 x 1250 x 1.0 � � �

2000 x 1000 x 1.2 � �

2500 x 1250 x 1.2 � � � �

3000 x 1500 x 1.2 �

2000 x 1000 x 1.5 � � �

2500 x 1250 x 1.5 � � � �

3000 x 1500 x 1.5 � �

2000 x 1000 x 2.0 � �

2500 x 1250 x 2.0 � � � �

3000 x 1250 x 2.0 �

3000 x 1500 x 2.0 � �

2000 x 1000 x 2.5 �

2500 x 1250 x 2.5 � �

2438 x 1219 x 2.83 �

2000 x 1000 x 3.0 �

2500 x 1250 x 3.0 � � � �

3000 x 1250 x 3.0 � �

3000 x 1500 x 3.0 � �

SheetOTHER ALLOYS



2000 x 1000 x 2.0 11.32500 x 1250 x 2.0 17.63000 x 1500 x 2.0 25.32000 x 1000 x 3.0 16.72500 x 1250 x 3.0 26.03000 x 1500 x 3.0 37.5


2000 x 1000 x 4.5 23.32500 x 1250 x 4.5 39.53000 x 1500 x 4.5 56.92000 x 1000 x 6.0 34.12500 x 1250 x 6.0 53.23000 x 1500 x 6.0 76.6

Five Bar Treadplate ALLOY: 5754-H111


2500 x 1250 x 1.5 13.92500 x 1250 x 2.0 18.12500 x 1250 x 3.0 26.6

Triple GripALLOY: 5052


2500 x 1250 x 1.5 13.63000 x 1500 x 3.0 40.6

PropellerALLOY: 3003


2000 x 1000 x 0.5 2.712500 x 1250 x 0.5 4.232000 x 1000 x 0.6 3.252500 x 1250 x 0.6 5.082000 x 1000 x 0.7 3.79


2500 x 1250 x 0.7 5.932000 x 1000 x 0.8 4.342500 x 1250 x 0.8 6.782500 x 1250 x 1.0 8.472500 x 1250 x 1.2 10.2

StuccoALLOY: 1050A-H14

1.5mm also available, contact your local Blackburns for furtherinformation, see back cover for location and contact details



2500 x 1250 x 4.0 33.92500 x 1250 x 5.0 42.32500 x 1250 x 6.0 50.82500 x 1250 x 8.0 67.82500 x 1250 x 10.0 84.32500 x 1250 x 12.0 102.3


2500 x 1250 x 4.0 33.92000 x 1000 x 5.0 27.12500 x 1250 x 5.0 42.33000 x 1500 x 5.0 61.22000 x 1000 x 6.0 32.52500 x 1250 x 6.0 50.8


2000 x 1000 x 4.0 21.82500 x 1250 x 4.0 33.93000 x 1500 x 4.0 49.02000 x 1000 x 5.0 27.13000 x 1500 x 5.0 61.2


2500 x 1250 x 4.0 33.92500 x 1250 x 5.0 42.32500 x 1250 x 6.0 50.82500 x 1250 x 8.0 67.42500 x 1250 x 10.0 84.32500 x 1250 x 12.0 102.32500 x 1250 x 15.0 126.42500 x 1250 x 20.0 168.52500 x 1250 x 25.0 210.7


2500 x 1250 x 5.0 42.32000 x 1000 x 6.0 32.72500 x 1250 x 6.0 50.83000 x 1500 x 6.0 73.2

Shate & PlateALLOY: 6082

ShateALLOY: 1050

ShateALLOY: 5251

Shate & PlateALLOY: 5083


Plate CUT TO BESPOKE SIZES

Size 6082 T6 5083 0 MIC 6 ALUMEC ALUMEC79 89

3.0mm � �

4.0mm � �

5.0mm � �

6.0mm � �

6.35mm � �

8.0mm � � �

9.53mm � �

10.0mm � � �

12.0mm � � �

12.7mm � � �

15.0mm � � �

15.88mm � � �

16.0mm � � �

19.05mm � � �

20.0mm � � � �

22.22mm � �

25.0mm � � � � �

25.4mm � � �

30.0mm � � � � �

31.75mm � � �

35.0mm � �

38.1mm � � �

40.0mm � � � � �

44.45mm � � �

50.0mm � �

50.8mm � � �

57.15mm �

60.0mm � � �


Size 6082 T6 5083 0 MIC 6 ALUMEC ALUMEC79 89

63.5mm � � �

69.85mm �

70.0mm � �

76.2mm � � �

80.0mm � �

82.55mm �

88.9mm � �

90.0mm � �

100.0mm � �

101.6mm � �

114.3mm � �

120.0mm � �

127.0mm � �

130.0mm �

150.0mm �

152.4mm � �

160.0mm �

170.0mm �

177.8mm �

200.0mm � �

203.2mm �

228.6mm �

250.0mm �

254.0mm �

304.0mm �

305.0mm �

400.0mm �

Plate CUT TO BESPOKE SIZES


Quarter HardCircles1200-H12

Soft Circles1200-0

Diameter Thickness Weighteach (Kg)

125mm 0.9mm 0.030155mm 0.9mm 0.046180mm 0.9mm 0.062190mm 0.9mm 0.069215mm 0.9mm 0.089220mm 0.9mm 0.093225mm 0.9mm 0.097320mm 0.9mm 0.196345mm 0.9mm 0.228240mm 1.2mm 0.147300mm 1.2mm 0.230305mm 1.2mm 0.238320mm 1.2mm 0.262330mm 1.2mm 0.278365mm 1.2mm 0.340380mm 1.2mm 0.369470mm 1.2mm 0.565620mm 1.2mm 0.983


180mm 1.2mm 0.083205mm 1.2mm 0.107240mm 1.2mm 0.147250mm 1.2mm 0.160270mm 1.2mm 0.186280mm 1.2mm 0.200300mm 1.2mm 0.230305mm 1.2mm 0.238330mm 1.2mm 0.278360mm 1.2mm 0.331380mm 1.2mm 0.369390mm 1.2mm 0.389400mm 1.2mm 0.409405mm 1.2mm 0.419420mm 1.2mm 0.451490mm 1.2mm 0.614550mm 1.2mm 0.773570mm 1.2mm 0.830600mm 1.2mm 0.920620mm 1.2mm 0.983


Soft Circles(continued...)1200-0


210mm 1.6mm 0.150240mm 1.6mm 0.196260mm 1.6mm 0.230265mm 1.6mm 0.239295mm 1.6mm 0.297305mm 1.6mm 0.317330mm 1.6mm 0.371375mm 1.6mm 0.479390mm 1.6mm 0.518430mm 1.6mm 0.630545mm 1.6mm 1.012610mm 1.6mm 1.268650mm 1.6mm 1.440680mm 1.6mm 1.576300mm 2.0mm 0.383320mm 2.0mm 0.436340mm 2.0mm 0.492390mm 2.0mm 0.648410mm 2.0mm 0.716440mm 2.0mm 0.825460mm 2.0mm 0.901495mm 2.0mm 1.043530mm 2.0mm 1.197550mm 2.0mm 1.289580mm 2.0mm 1.433270mm 2.5mm 0.388290mm 2.5mm 0.448305mm 2.5mm 0.496380mm 2.5mm 0.769465mm 2.5mm 1.151560mm 2.5mm 1.670345mm 3.0mm 0.761


Coil ProcessingCapabilities

ALUMINIUM SLIT COIL

Sizes range from:

• Gauge: 0.25mm > 3.0mm

• Widths available: 10mm > 1250mm

• Tolerance: ±0.127mm

STAINLESS STEEL SLIT COIL

Sizes range from:

• Gauge: 0.4mm > 2.0mm


• Tolerance: ±0.127mm

Please enquire for specific gauge and width

configurations available

ALUMINIUM PRECISION BLANKS

Sizes range from:

• Gauge: 0.25mm > 2.0mm


• Length Min/Max: 150mm > 3000m

• Tolerance Width: ±0.127mm

• Tolerance Length: ±0.5mm

STAINLESS STEEL PRECISION BLANKS

Sizes range from:

• Gauge: 0.4mm > 2.0mm


• Length Min/Max: 150mm > 3000m

• Tolerance Width: ±0.127mm

• Tolerance Length: ±0.5mm

Polycoating available on all products on request



CoilMILL FINISH

Anodised CoilLIGHTING

& ARCHITECTURAL

Thickness 1050 1200 3103 3004 3005 5251 5005 5182(mm)

0.25 � � �

0.28 �

0.30 � �

0.34 �

0.38 �

0.40 �

0.42 � �

0.46 �

0.480.50 � �

0.56 � �

0.60 �

0.65 �

0.70 � �

0.80 � �

0.90 � � �

1.00 � �

1.20 � � �

1.25 � �

1.40 �

1.50 � � �

1.60 � �

2.00 � � �

2.50 � �

3.00 � � �

Thickness ART90 ART101 ART180 ART145 ART125 ART230 ART235 ART250(mm)

0.40 � � � � � � �

0.50 � � � � �

Thickness V95100 V95138 V95145 MILL BGT WHITE STUCCO GOLD(mm)

0.30 � �

0.35 �

0.40 � � � �

0.45 �

0.50 � � �

0.77 �

0.90 �


31STAINLESS STEEL - Nationwide Supply Solutions...

BAR & SECTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32

WELDED MESH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39

CIRCLE POLISH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40

MIRROR POLISH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40

ROLLED PRODUCTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40

STAINLESS STEEL PIPE SIZES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44

SEAMLESS PIPE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46

SEAMLESS BUTT WELD FITTINGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .47

WELDED PIPE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50

WELDED BUTT WELD FITTINGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51

FLANGES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55

FITTINGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57

SEAMLESS TUBE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58

HYGIENIC TUBE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .60

HYGIENIC FITTINGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .61

STRUCTURAL & DECORATIVE TUBE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .62


Blackburns Stainless Steel...

Blackburns Metals Limited have been supplying industry with metal products such as

Aluminium, Stainless Steel, Brass and Copper and other non-ferrous semi-finished

products for over thirty years, building a reputation for quality and service with its many

customers in diverse market sectors.

Although synonymous with Aluminium, Blackburns also supplies Stainless Steel and has

access to one of the most comprehensive and largest stock ranges within Europe.

So why not join many of our existing customers who enjoy the benefits of our

nationwide distribution network for your supply of Stainless Steel.


Round303S31 (1.4305)

BRIGHT DRAWN

Round303S31 (1.4305)

SMOOTH TURNED

* BRIGHT GROUND

Round303S31 (1.4305)

ROUGH TURNED

33Stainless Steel - BAR & SECTIONS

Round304S31 (1.4301)

BRIGHT DRAWN IMA

Round304S31 (1.4301)

SMOOTH TURNED IMA


Round304S11/S31

(1.4307)

ROUGH TURNED

Round316S11/S31

(1.4404)

BRIGHT DRAWN IMA


Round316S11/S31

(1.4404)

SMOOTH TURNED

* BRIGHT GROUND IMA


Round316S11/S31

(1.4404)

ROUGH TURNED


Flat304S11/S31 &

316S11/S31

(1.4307 + 1.4404)

HOT ROLLED

Hexagon303S31 & 316S11/S31

(1.4305 + 1.4404)


FlatTYPE 304 & 316L

(1.4301 + 1.4404)

ROLLED EDGE

Square304S11/S31 &

316S11/S31

(1.4301 + 1.4404)

39Stainless Steel - BAR & SECTIONS / WELDED MESH

Angle304S31 & 316S11/S31

(1.4301 + 1.4404)

Welded MeshTYPE 304


Sheet1.4301

TYPE 304

POLISHED 240 GRIT,

WHITE POLYCOAT

Sheet1.4401

TYPE 316

POLISHED 240 GRIT,

WHITE POLYCOAT

Sheet1.4016

TYPE 430

POLISHED 240 GRIT,

BLACK POLYCOAT

SheetTYPE 304 (1.4301)

CIRCLE POLISH FINISH

SheetTYPE 304 (1.4301)

MIRROR POLISH FINISH

Other sizes available to order

41Stainless Steel - CIRCLE & MIRROR POLISH / ROLLED PRODUCTS

Sheet1.4301

TYPE 304

2B FINISH

Sheet1.4301

TYPE 304

2R (BA) FINISH

Sheet1.4401

TYPE 316

2B FINISH


Sheet1.4016

TYPE 430

2R (BA) FINISH

Plate / Sheet1.4003

1D FINISH

PlateCOLD ROLLED DESCALED

ASTM A240, ASME

SA 240 TYPE 304L & 316L

43Stainless Steel - ROLLED PRODUCTS

CPP Plate1D FINISH

ASTM A240, ASME

SA240: 304, 304L, 316, 316L

EN10088-2: 1.4301, 1.4307,

1.4401, 1.4404

Quarto Plate1D FINISH

ASTM A240, ASME

SA240: 304, 304L, 316, 316L

EN10088-2: 1.4301, 1.4307,

1.4401, 1.4404

BS1501 PT3: 304S31, 304S11,

316S31, 316S11

StainlessTreadplateAISI 304, ASTM A793/96

PATTERN B


Stainless SteelPipe Sizes

Pipe OD SCHEDULE 5S SCHEDULE 10S SCHEDULE 40S SCHEDULE 80SSize

1⁄8 10.3 - 1.24 1.73 2.411⁄4 13.7 - 1.65 2.24 3.023⁄8 17.1 - 1.65 2.31 3.201⁄2 21.3 1.65 2.11 2.77 3.733⁄4 26.7 1.65 2.11 2.87 3.911 33.4 1.65 2.77 3.38 4.5511⁄4 42.2 1.65 2.77 3.56 4.8511⁄2 48.3 1.65 2.77 3.68 5.082 60.3 1.65 2.77 3.91 5.5421⁄2 73.0 2.11 3.05 5.16 7.013 88.9 2.11 3.05 5.49 7.6231⁄2 101.6 2.11 3.05 5.74 8.084 114.3 2.11 3.05 6.02 8.565 141.3 2.77 3.40 6.55 9.536 168.3 2.77 3.40 7.11 10.978 219.1 2.77 3.76 8.18 12.7010 273.1 3.40 4.19 9.27 12.7012 323.9 3.96 4.57 9.53 12.7014 355.6 3.96 4.78 - -

16 406.4 4.19 4.78 - -

18 457 4.19 4.78 - -

20 508 4.78 5.54 - -

22 559 4.78 5.54 - -

24 610 5.54 6.35 - -

30 762 6.35 7.92 - -

45Stainless Steel - STAINLESS STEEL PIPE SIZES


Seamless PipeASTM A312, 304L

Seamless PipeASTM A312, 316L

47Stainless Steel - SEAMLESS PIPE / BUTT WELD FITTINGS

Seamless ButtWeld FittingsASTM A403, 316L


Seamless ButtWeld Fittings

ASTM A403, 304L

Seamless ButtWeld Fittings

ASTM A403, 304L

49Stainless Steel - SEAMLESS BUTT WELD FITTINGS

Seamless ButtWeld FittingsASTM A403, 316L


Welded PipeASTM A312, 304L

Welded PipeASTM A312, 316L

51Stainless Steel - WELDED PIPE / BUTT WELD FITTINGS

Welded ButtWeld FittingsASTM A403, 304L


Welded ButtWeld Fittings

ASTM A403, 316L

53Stainless Steel - WELDED BUTT WELD FITTINGS

Welded ButtWeld FittingsASTM A403, 304L


Welded ButtWeld Fittings

ASTM A403, 316L

55Stainless Steel - WELDED BUTT WELD FITTINGS / FLANGES

FlangesASTM A182,

ANSI B16.5

TYPE 304L & 316L


FlangesASTM A182, ANSI B16.5

TYPE 304L & 316L

57Stainless Steel - FLANGES / FITTINGS

FittingsTYPE 316L


Seamless TubeASTM A269

TYPE 304L


TYPE 316L

59Stainless Steel - SEAMLESS TUBE


TYPE 316L


Hygienic TubeWELDED, ANNEALED

POLISHED, BA

& DESCALED

TYPE 304L & 316L

Hygienic TubeWELDED, POLISHED

& DESCALED

TYPE 304L & 316L

(NOT ANNEALED)

61Stainless Steel - HYGIENIC TUBE / HYGIENIC FITTINGS

Hygienic FittingsTYPE 304L & 316L


Round 304WELDED

MIRROR POLISHED

Type 304 & 316STAINLESS STEEL WELDED

& UNANNEALED

Round 316WELDED

MIRROR POLISHED

Round 316WELDED DULL POLISHED

63Stainless Steel - STRUCTURAL & DECORATIVE TUBE

Square 304WELDED DULL POLISHED

Square 304WELDED UNPOLISHED

Type 304 & 316HANDRAIL SECTION,

WELDED, UNANNEALED,

DULL POLISHED

+ FITTINGS

(See Page 119 for full range)


Rectangular 304WELDED UNPOLISHED


Rectangular 304WELDED DULL POLISHED



Rectangular 316WELDED UNPOLISHED



Square 316WELDED UNPOLISHED




69YELLOW METALS - Nationwide Supply Solutions...

BRASS ROD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .70

BRASS HEXAGON . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .72

BRASS ANGLE, SQUARE, TUBE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .73

BRASS FLAT BAR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .74

BRASS SHEET . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .75

ALUMINIUM BRONZE, BRONZE DRAWN ROD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .76

BRONZE ROD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77

BRONZE SHEET . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77

COPPER FLAT BAR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .78

COPPER SHEET . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .79

COPPER ROUND BAR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .80

COPPER TUBE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .81


Blackburns Yellow Metals...

Blackburns range of yellow metals includes bronze, brass, copper and its alloys and iswidely used in many applications and industries.

The products versatility ensures good conductivity the properties include strength;ductility; hardness, corrosion resistance and low magnetic permeability. It is availablein a variety of colours, together with ease of machining, plating, forming and polishing.

Our local stocks enhanced by our central facility hold all of the frequently required formsof copper and its alloys including sheet, plate, machining rod & hollow rod, flat bar,hexagon bar and tube.

We also offer a complete range of fabrication and processing services includingmachining bar, pipe and tube cutting throughout our nationwide network of sales anddistribution centres.


Diameter Weight(inches unless per metre (Kg)specified)

1⁄8 0.073⁄16 0.155⁄32 0.104mm 0.115mm 0.177⁄32 0.216mm 0.241⁄4 0.277mm 0.339⁄32 0.345⁄16 0.428mm 0.4311⁄32 0.519mm 0.543⁄8 0.6110mm 0.6713⁄32 0.1715⁄32 0.957⁄16 0.8212mm 0.961⁄2 1.0813mm 1.1317⁄32 1.229⁄16 1.3614mm 1.3115mm 1.505⁄8 1.6316mm 1.7121⁄32 1.8617mm 1.9211⁄16 2.0418mm 2.1623⁄32 2.233⁄4 2.4220mm 2.6713⁄16 2.8422mm 3.237⁄8 3.3015⁄16 3.7929⁄32 3.5324mm 3.8425mm 4.17


1 4.3111⁄16 4.8626mm 4.5128mm 5.2311⁄8 5.4530mm 6.0113⁄16 6.0711⁄4 6.7315⁄16 7.4213⁄8 8.1435mm 8.1836mm 8.6517⁄16 8.9011⁄2 9.6940mm 10.7015⁄8 11.4013⁄4 13.2017⁄8 15.1050mm 16.702 17.2021⁄8 19.4021⁄4 21.8060mm 24.0023⁄8 24.3021⁄2 26.9065mm 28.2125⁄8 29.7023⁄4 32.603 38.8031⁄4 45.5031⁄2 52.804 68.9041⁄4 77.8041⁄2 87.20130mm 108.00140mm 129.00155mm 155.00180mm 210.00205mm 281.00230mm 353.00255mm 434.00

RodCW614N/CZ121MFREE MACHINING BRASS

3 METRE LENGTHS

BSEN 12164

71Yellow Metals - BRASS ROD

Diameter Weight(in) per metre (Kg)

1⁄4 0.273⁄8 0.617⁄16 0.821⁄2 1.089⁄16 1.325⁄8 1.6811⁄16 1.973⁄4 2.4213⁄16 2.757⁄8 3.301 4.31


11⁄8 5.4511⁄4 6.7313⁄8 8.1411⁄2 9.6913⁄4 13.202 17.2021⁄4 21.8021⁄2 26.9023⁄4 32.603 38.804 68.90


1⁄4 0.273⁄8 0.611⁄2 1.085⁄8 1.673⁄4 2.427⁄8 3.281 4.3111⁄4 6.73


11⁄2 9.6915⁄8 11.3013⁄4 13.112 17.2021⁄2 26.903 38.804 68.90


3⁄16 0.155mm 0.171⁄4 0.275⁄16 0.423⁄8 0.6110mm 0.66


7⁄16 0.821⁄2 1.085⁄8 1.683⁄4 2.427⁄8 3.301 4.31

RodCW606N/CZ131RIVETING QUALITY BRASS

3 METRE LENGTHS

BSEN 12164

RodCW721R & 722R/CZ114MHIGH TENSILE BRASS /

MANGANESE BRONZE

3 METRE LENGTHS

BSEN 12163

RodCW712R/CZ112NAVAL BRASS

3 METRE LENGTHS *

BSEN 12163

* Bars over 3 inches in diameter may vary in length


Size AF Weight(inches unless per metre (Kg)specified)

0.248 0.295mm 0.181⁄4 0.306mm 0.277mm 0.365⁄16 0.468mm 0.470.324 0.503⁄8 0.6710mm 0.7411mm 0.890.445 0.947⁄16 0.9112mm 1.061⁄2 1.1913mm 1.240.525 1.3114mm 1.449⁄16 1.5015mm 1.650.60 1.715⁄8 1.8616mm 1.8817mm 2.1311⁄16 2.2418mm 2.370.71 2.3919mm 2.663⁄4 2.6713⁄16 3.1420mm 2.950.820 3.1922mm 3.56

Size AF Weight(inches unless per metre (Kg)specified)

7⁄8 3.690.920 4.0215⁄16 4.1724mm 4.241 4.751.010 4.8411⁄16 5.361.100 5.7611⁄8 6.0130mm 6.631.200 6.8411⁄4 7.4232mm 7.541.300 8.0315⁄16 8.2913⁄8 8.9836mm 9.541.480 10.4011⁄2 10.7015⁄8 12.5041mm 12.401.670 13.2013⁄4 14.501.860 16.4046mm 15.6050mm 18.402.050 19.902.200 23.0021⁄2 29.7065mm 31.1023⁄4 35.903 42.70

HexagonCW614N/CZ121MFREE MACHINING BRASS

3 METRE LENGTHS

BSEN 12164

73Yellow Metals - HEXAGON / ANGLE / SQUARE / TUBE


1⁄8 0.093⁄16 0.191⁄4 0.345⁄16 0.543⁄8 0.777⁄16 1.051⁄2 1.375⁄8 2.143⁄4 3.087⁄8 4.20


1 5.4811⁄4 8.5711⁄2 12.3013⁄4 16.802 21.9021⁄4 27.8021⁄2 34.0023⁄4 41.503 49.40


1⁄2 x 1⁄2 x 1⁄8 0.303⁄4 x 3⁄4 x 1⁄8 0.941 x 1 x 1⁄8 1.2911⁄4 x 11⁄4 x 1⁄8 1.6311⁄2 x 11⁄2 x 1⁄8 1.9711⁄2 x 11⁄2 x 3⁄16 2.89


11⁄2 x 11⁄2 x 1⁄4 3.772 x 2 x 1⁄8 2.662 x 2 x 3⁄16 3.992 x 2 x 1⁄4 5.1421⁄2 x 21⁄2 x 1⁄4 6.433 x 3 x 11⁄4 7.71

AngleCW624N/CZ13012 FT LENGTHS

BSEN 12167

SquareCW614N/CZ121MFREE MACHINING BRASS

3 METRE LENGTHS

BSEN 12164


3⁄8 o/d x 20 swg 0.213⁄8 o/d x 18 swg 0.271⁄2 o/d x 20 swg 0.291⁄2 o/d x 18 swg 0.371⁄2 o/d x 16 swg 0.485⁄8 o/d x 20 swg 0.375⁄8 o/d x 16 swg 0.623⁄4 o/d x 16 swg 0.753⁄4 o/d x 20 swg 0.443⁄4 o/d x 18 swg 0.587⁄8 o/d x 20 swg 0.521 o/d x 20 swg 0.591 o/d x 18 swg 0.781 o/d x 16 swg 1.03


1 o/d x 10 swg 1.9111⁄4 o/d x 16 swg 1.3011⁄2 o/d x 20 swg 0.9011⁄2 o/d x 18 swg 1.1911⁄2 o/d x 16 swg 1.5711⁄2 o/d x 10 swg 3.0313⁄4 o/d x 16 swg 1.852 o/d x 20 swg 1.222 o/d x 18 swg 1.602 o/d x 16 swg 2.122 o/d x 10 swg 4.1321⁄2 o/d x 16 swg 2.673 o/d x 16 swg 3.22

TubeCW508L/CZ108HALF HARD

5 METRE LENGTHS

BSEN 12449



3⁄8 x 1⁄8 0.263⁄8 x 3⁄16 0.383⁄8 x 1⁄4 0.521⁄2 x 1⁄8 0.341⁄2 x 3⁄16 0.501⁄2 x 1⁄4 0.691⁄2 x 5⁄16 0.831⁄2 x 3⁄8 1.035⁄8 x 1⁄8 0.435⁄8 x 1⁄4 0.865⁄8 x 3⁄8 1.295⁄8 x 1⁄2 1.713⁄4 x 1⁄8 0.513⁄4 x 3⁄16 0.773⁄4 x 1⁄4 1.033⁄4 x 5⁄16 1.283⁄4 x 3⁄8 1.543⁄4 x 1⁄2 2.063⁄4 x 5⁄8 2.551 x 1⁄8 0.691 x 3⁄16 1.031 x 1⁄4 1.371 x 5⁄16 1.721 x 3⁄8 2.061 x 1⁄2 2.741 x 5⁄8 3.451 x 3⁄4 4.1111⁄4 x 1⁄8 0.8511⁄4 x 1⁄4 1.7111⁄4 x 3⁄8 2.5711⁄4 x 1⁄2 3.4311⁄4 x 3⁄4 5.1411⁄4 x 1 6.8511⁄2 x 1⁄8 1.0311⁄2 x 3⁄16 1.5411⁄2 x 1⁄4 2.0611⁄2 x 3⁄8 3.0811⁄2 x 1⁄2 4.11


11⁄2 x 5⁄8 5.1511⁄2 x 3⁄4 6.1111⁄2 x 1 8.2313⁄4 x 1⁄2 4.752 x 1⁄8 1.372 x 3⁄16 2.062 x 1⁄4 2.742 x 3⁄8 4.112 x 1⁄2 5.482 x 5⁄8 6.792 x 3⁄4 8.172 x 1 11.002 x 11⁄4 13.752 x 11⁄2 16.3021⁄2 x 1⁄4 3.4321⁄2 x 3⁄8 5.0821⁄2 x 1⁄2 6.8621⁄2 x 3⁄4 10.0221⁄2 x 1 13.6021⁄2 x 11⁄4 17.0321⁄2 x 11⁄2 20.3021⁄2 x 13⁄4 23.733 x 1⁄8 2.063 x 1⁄4 4.113 x 3⁄8 6.173 x 1⁄2 8.233 x 1 16.503 x 11⁄2 24.703 x 2 32.904 x 1⁄8 2.744 x 1⁄4 5.484 x 3⁄8 8.174 x 1⁄2 11.004 x 3⁄4 16.304 x 1 21.904 x 11⁄2 32.704 x 2 43.90

Flat BarCW614N/CZ121

FREE MACHINING BRASS

12 FT LENGTHS

BSEN 12167

75Yellow Metals - BRASS FLAT BAR / SHEET

Size Weightper sheet (Kg)

2m x 1m x 0.45mm 8.004' x 2' x 26 swg 2.902m x 1m x 0.55mm * 9.304' x 2' x 0.55mm 3.452m x 1m x 0.7mm * 11.804' x 2' x 0.7mm 4.408' x 1m x 0.9mm 19.002m x 1m x 0.9mm * 15.204' x 2' x 0.9mm 5.652.5m x 1.25m x 1.2mm 31.728' x 1mm x 1.2mm * 25.002m x 1m x 1.2mm * 20.304' x 2' x 18 swg 7.542.5m x 1.25m x 1.5mm 39.534' x 2' x 16 swg 10.00


8' x 1m x 1.5mm * 31.002m x 1m x 1.5mm * 25.302.5m x 1.25m x 2mm 52.812m x 1m x 2mm * 33.804' x 2' x 2mm 12.602m x 1m x 2.5mm * 42.254' x 2' x 12 swg 16.702m x 1m x 3mm * 50.702.5m x 1.25m x 3mm 79.214' x 2' x 10 swg 20.402m x 1m x 4mm 67.602m x 1m x 5mm 86.002m x 1m x 3⁄16" 80.002m x 1m x 1⁄4" 107.00

SheetCW508L-H095/CZ108-H/HBSEN 1652


2m x 1m x 0.45mm 8.002m x 1m x 0.55mm 9.304' x 2' x 24 swg 3.452m x 1m x 0.7mm 11.802m x 1m x 0.9mm 15.20


4' x 2' x 20 swg 5.652m x 1m x 1.2mm 20.304' x 2' x 18 swg 7.542m x 1m x 1.6mm 27.002m x 1m x 2mm 33.83

SheetCW505L/CZ10670 / 30 SOFT

SPINNING QUALITY

BSEN 1652

* Also stocked Bright Polished and Plastic Coated one side



5⁄8 1.503⁄4 2.177⁄8 2.961 3.8511⁄8 4.8711⁄4 6.0213⁄8 7.2811⁄2 8.6615⁄8 10.2013⁄4 11.802 15.4021⁄8 17.4021⁄4 19.5023⁄8 21.70


21⁄2 24.1025⁄8 26.5023⁄4 29.103 34.7031⁄4 40.7031⁄2 47.2033⁄4 54.504 61.6041⁄2 78.005 96.3051⁄2 116.006 139.007 189.00

Aluminium BronzeGRADE 2 PART 2

NES 833


1⁄2 1.125⁄8 1.753⁄4 2.527⁄8 3.431 4.4811⁄8 5.6811⁄4 7.0113⁄8 8.4811⁄2 10.0013⁄4 13.70


17⁄8 15.902 17.9021⁄8 20.4021⁄2 28.0023⁄4 33.903 40.4031⁄4 47.6031⁄2 54.904 71.70

Drawn RodPB102

BS 2874

77Yellow Metals - BRONZE / DRAWN ROD / ROD / SHEET


1⁄2 0.965⁄8 1.5020mm 2.397⁄8 2.951 3.8532mm 6.1111⁄2 8.6645mm 12.00


2 4.4060mm 4.4065mm 4.2070mm 5.203 5.7031⁄2 6.204 6.60

RodCA104ALUMINIUM BRONZE

BS 2874 / BSB 23


2m x 1m x 0.55mm 9.794' x 2' x 24 swg 3.642m x 1m x 0.7mm 12.502m x 1m x 0.9mm 16.00


4' x 2' x 20 swg 5.952m x 1m x 1.2mm 21.404' x 2' x 18 swg 7.942m x 1m x 1.5mm 28.50

SheetCW024A/C106SOFT

SPINNING QUALITY

BSEN 1652


Size Weight(inches unless per metre (Kg)specified)

1⁄2 x 1⁄8 0.361⁄2 x 3⁄16 0.541⁄2 x 1⁄4 0.725⁄8 x 1⁄8 0.453⁄4 x 1⁄8 0.543⁄4 x 3⁄16 0.813⁄4 x 1⁄4 1.0820mm x 5mm 0.8920mm x 6mm 1.0720mm x 10mm 1.7825mm x 3mm 0.6725mm x 5mm 1.1125mm x 6mm 1.3425mm x 10mm 2.221 x 1⁄8 0.721 x 3⁄16 1.081 x 1⁄4 1.441 x 1⁄2 2.8730mm x 3mm 0.8030mm x 5mm 1.3430mm x 6mm 1.6130mm x 10mm 2.6711⁄4 x 1⁄8 0.9011⁄4 x 3⁄16 1.3511⁄4 x 1⁄4 1.7911⁄2 x 1⁄8 1.0811⁄2 x 1⁄4 2.1511⁄2 x 3⁄8 3.2311⁄2 x 1⁄2 4.3140mm x 5mm 1.7840mm x 6mm 2.1440mm x 8mm 2.8540mm x 10mm 3.5650mm x 3mm 1.3450mm x 5mm 2.23

Size Weight(inches unless per metre (Kg)specified)

50mm x 6mm 2.6750mm x 8mm 3.5750mm x 10mm 4.452 x 1⁄8 1.442 x 3⁄16 2.152 x 1⁄4 2.872 x 3⁄8 4.312 x 1⁄2 5.742 x 3⁄4 8.6160mm x 6mm 3.2060mm x 10mm 5.3421⁄2 x 1⁄4 5.5921⁄2 x 3⁄8 5.3821⁄2 x 1⁄2 7.183 x 1⁄4 4.313 x 3⁄8 6.463 x 1⁄2 8.6180mm x 10mm 7.1280mm x 12mm 8.54100mm x 6mm 5.34100mm x 10mm 8.90100mm x 12mm 10.604 x 1⁄4 5.744 x 3⁄8 8.614 x 1⁄2 11.50120mm x 6mm 6.42120mm x 10mm 10.705 x 1⁄4 7.185 x 1⁄2 14.30150mm x 6mm 8.02150mm x 10mm 13.406 x 1⁄4 8.616 x 1⁄2 17.20160mm x 10mm 14.20200mm x 10mm 17.80

Flat BarCW004A/C101

HARD DRAWN

HIGH CONDUCTIVITY

RADIUS EDGE

4 - 4.2 METRE LENGTHS

BSEN 13601

79Yellow Metals - COPPER FLAT BAR / SHEET


2m x 1m x 0.55mm 9.794' x 2' x 24 swg 3.642m x 1m x 0.7mm 12.504' x 2' x 22 swg 4.632m x 1m x 0.9mm 16.004' x 2' x 20 swg 5.952.5 x 1.25m x 1.2mm 33.302m x 1m x 1.2mm 21.404' x 2' x 18 swg 7.942.5m x 1.25m x 1.5mm 41.702m x 1m x 1.5mm 26.724' x 2' x 16 swg 10.602.5m x 1.25m x 2mm 55.602m x 1m x 2mm 35.60


4' x 2' x 14 swg 13.202m x 1m x 2.5mm 44.504' x 2' x 12 swg 17.462.5m x 1.25m x 3mm 83.402m x 1m x 3mm 53.404' x 2' x 10 swg 21.502m x 1m x 4mm 74.004' x 2' x 3⁄16 31.502m x 1m x 5mm 89.002m x 1m x 6mm 106.002.5m x 1.25m x 6mm 174.002.5m x 1.25m x 8mm 235.002.5m x 1.25m x 10mm 289.00

SheetCW024A/C106HALF HARD

BSEN 1652


2m x 1m x 0.9mm 16.004' x 2' x 20 swg 5.942m x 1m x 1.2mm 21.402m x 1m x 1.5mm 26.701200 x 600 x 1.6mm 10.20


2m x 1m x 2mm 35.601200 x 600 x 2mm 12.802m x 1m x 3mm 53.404' x 2' x 10 swg 21.502m x 1m x 4mm 74.00

SheetCW004A/C101HALF HARD

BSEN 1652



1⁄4 0.285⁄16 0.443⁄8 0.6310mm 0.7012mm 1.011⁄2 1.135⁄8 1.7616mm 1.7920mm 2.803⁄4 2.547⁄8 3.4525mm 4.391 4.5111⁄8 5.7130mm 6.32


11⁄4 7.0513⁄8 8.5311⁄2 10.0040mm 11.2015⁄8 11.9013⁄4 13.8045mm 14.1050mm 17.402 18.0021⁄4 22.8021⁄2 28.2023⁄4 34.103 40.6031⁄4 45.304 72.20

Round BarCW004A/C101

HARD DRAWN

HIGH CONDUCTIVITY


BSEN 13601


1⁄2 1.133⁄4 2.541 4.51

Round BarCW114C/C111

HARD


BSEN 12614


If you can't find what you're looking for call us...

81Yellow Metals - COPPER ROUND BAR / TUBE


1⁄4 o/d x 20 swg 0.141⁄4 o/d x 18 swg 0.173⁄8 o/d x 20 swg 0.223⁄8 o/d x 18 swg 0.291⁄2 o/d x 20 swg 0.301⁄2 o/d x 18 swg 0.391⁄2 o/d x 16 swg 0.505⁄8 o/d x 20 swg 0.383⁄4 o/d x 20 swg 0.463⁄4 o/d x 18 swg 0.613⁄4 o/d x 16 swg 0.79


7⁄8 o/d x 20 swg 0.547⁄8 o/d x 16 swg 0.947⁄8 o/d x 18 swg 0.721 o/d x 20 swg 0.631 o/d x 18 swg 0.831 o/d x 16 swg 1.0811⁄4 o/d x 16 swg 1.3711⁄2 o/d x 16 swg 1.662 o/d x 16 swg 2.2421⁄2 o/d x 16 swg 2.81

TubeCW024A/C106HALF HARD

6 METRE LENGTHS

BSEN 12449


83SIGN & DISPLAY MATERIALS - Nationwide Supply Solutions...

ALOCHROMED & PAINTED SHEET . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .84

ALUMINIUM CIRCLES, TRIANGLES, OCTAGONS & BLANKS (+ BOLLHOFF RAILS) . . . . . . . .85

ALUMINIUM RAILS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .86

ALUMINIUM TEE SECTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .87

ALUMINIUM ROUND POSTS & SQUARE POSTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .88

STEEL ROUND POSTS & SQUARE POSTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .89

BUCKLE SYSTEMS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .90

STAINLESS STEEL BANDING SYSTEMS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .91

STAINLESS STEEL CLIP SECTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .92

ALUMINIUM OFFSET BRACKETS & TWO PIECE UNI-CLAMP . . . . . . . . . . . . . . . . . . . . . . . . . .93

COMPLETE OFFSET BRACKET ASSEMBLIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .93

BCP COMPOSITE SHEET . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .94

BCP HOARDING PANEL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .96

BCP COMPOSITE TRAY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .96

STAINLESS STEEL SHEET . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .97

GRP CIRCLES, TRIANGLES & SHEET . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .98

PRE-ANODISED SHEET . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .100

PATTERNED SHEET . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .101

PLASTISOL COATED STEEL CIRCLES, TRIANGLES, SHEET & BLANKS (+ BOLLHOFF RAILS) . . .102

RAL COLOUR GUIDE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .104


Blackburns Sign & Display Materials...

Blackburns continue to lead the market for the supply of component parts for the

commercial and traffic sectors. With a comprehensive range of sign components

together with ‘kit’ and ‘semi fabrication’ options, sign makers will be able to choose

between buying individual components such as aluminium painted sheet, rails or posts

as separate items, or in kit form with bespoke fabrication to the customers finished

requirements. Processing equipment has recently been enhanced and Blackburns now

have the ability to produce bespoke sign tray or cassettes and intricate shape signs for

external and internal purposes.


Alochromed& Painted Sheet Grey one side 6’ x 3’ x 11swg

6’ x 4’ x 11swg8’ x 4’ x 11swg10’ x 4’ x 11swg10’ x 5’ x 11swg2438mm x 600mm x 11swg3048mm x 600mm x 11swg2100mm x 1525mm x 11swg2500mm x 1250mm x 1.5mm2438mm x 1219mm x 2.5mm

Grey two sides 6’ x 3’ x 11swg8’ x 4’ x 11swg

Grey back with white front 6’ x 3’ x 11swg6’ x 4’ x 11swg8’ x 4’ x 11swg2100mm x 1525mm x 11swg2438mm x 1219mm x 2.5mm10’ x 5’ x 11swg

Grey back with black front 8’ x 4’ x 11swgBlack one side 6’ x 3’ x 11swg

6’ x 4’ x 11swg 8’ x 4’ x 11swg10’ x 5’ x 11swg

Alochromed only 8’ x 4’ x 11swg(all sizes can be Alochromed) 10’ x 5’ x 11swg

2500mm x 1250mm x 1.5mmWhite one side 2500mm x 1250mm x 0.7mm

2500mm x 1250mm x 1.0mm2500mm x 1250mm x 1.5mm2500mm x 1250mm x 1.8mm2500mm x 1250mm x 2.0mm3000mm x 1250mm x 1.5mm3000mm x 1500mm x 1.5mm8’ x 4’ x 11swg

Silver anodised sheet 2500mm x 1250mm x 1mm2500mm x 1250mm x 1.5mm2500mm x 1250mm x 2mm2500mm x 1250mm x 3mm

Bright Silver 1219mm x 610mm x 0.5mmBright Gold 1219mm x 610mm x 0.5mmBright Copper 1219mm x 610mm x 0.5mmBrushed Silver 1219mm x 610mm x 0.635mmBrushed Gold 1219mm x 610mm x 0.5mmHammertone 1850mm x 610mm x 0.5mmAlumaplus 2500mm x 1232mm x 0.9mmAlumaplus 2500mm x 1232mm x 1.2mmDuramatt 1219mm x 610mm x 0.5mm

Processing facilities areavailable to cut tocustomised finished sizes.

All sizes can be suppliedwith fixing rails attachedusing the blind rivetingsystem.

Sheets are available inother colours and sizeson request.

FINISH SIZE

PRE-ANODISED SHEET SIZE ( also see Page 18 )

85Sign & Display Materials

Aluminium Circles

AluminiumTriangles

All Aluminium blanks can be supplied with Sign Channels attachedusing a blind rivet system.

TO EN12881/1REGULATIONS

300mm � � � �

450mm � � � �

600mm � � � �

750mm � � � �

900mm � � � �

1200mm � � � �

1500mm � �

Other sizes available upon request

PAINTED PAINTED PAINTED PAINTEDSIZE GREY BLACK GREY BLACK

(BS 381C/693) (RAL 9005) (WITH RAIL ATTACHED)by Bollhoff System

600mm � � � �

750mm � � � �

900mm � � � �

1200mm � � � �

1500mm � �




AluminiumOctagons

600mm � � � �

750mm � � � �





5000mm � � �

Aluminium Rails

MINI RAIL

SMALL RAIL

MEDIUM RAIL

LARGE BOLLHOFF RAIL

MEDIUM INTERLOCK

LARGE INTERLOCK

5000mm � � �

3000mm � � �

5000mm � � �

6000mm � � � �

6000mm � �

5000mm � �

6000mm � �

6000mm � �

3000mm � � � �

5000mm � � � �

PAINTED PAINTED PAINTED MILLLENGTH GREY BLACK WHITE FINISH

(BS 381C/693) (RAL 9005) (RAL 9016)

SMALL FLANGED RAIL


AluminiumTee Sections

SMALL TEE SECTION

LARGE TEE SECTION

3000mm � � � �

5000mm � � � �

3000mm � � � �

5000mm � � � �

PAINTED PAINTED PAINTED MILLLENGTH GREY BLACK WHITE FINISH

(BS 381C/693) (RAL 9005) (RAL 9016)

For more informationon Uni-Clamps and ourrange of Offset Bracketsand Complete OffsetBracket Assemblies,please see Page 11.

SUPPORT &SIGN STIFFENING CD

Blackburns Metals offera Signload Programfor Support and SignStiffening toBS EN 12889-1.(System Requirements:

Windows 2000, XP and Vista)

For further details pleasecontact your nearestBlackburns sales office.

(see back cover for locationand contact details...)


AluminiumRound Posts

AluminiumSquare Posts

50mm � �

76mm � � �

Available in 3m to 6m lengths.

A full range of post caps and base plates are also available with priceson request.

Standard RAL Colours to order.

PAINTED ANODISED MILLSIZE Ø GREY SILVER FINISH

(BS 381C/693) (AA25)

50 x 50mm � � �

76 x 76mm � � �

100 x 100mm � � �

Available in 3m to 6m lengths.

Aluminium Square Posts can also be Anodised Silver on request.

A full range of post caps and base plates are also available with priceson request.

Standard RAL Colours to order.

PAINTED PAINTED MILLSIZE BLACK WHITE FINISH

(RAL 9005) (RAL 9016)


SIZE PVC GREY

SteelRound Posts

SteelSquare PostsAvailable on request �

Available from 3m lengths upwards.

A full range of stainless steel clips, post caps and base plates are alsoavailable with prices on request.

50mm � �

60mm � �

76mm � �

89mm � �

114mm � �

140mm � �

168mm � �

197mm � �

219mm � �

Available from 3m lengths upwards.

A full range of stainless steel clips, post caps and base plates are alsoavailable with prices on request.

SIZE Ø PVC GREY GALVANISED


Buckle Systems

Buckles are sold in quantities of 100

TYPE 1 BUCKLE

TYPE 2 BUCKLE

TYPE 3 BUCKLE

STANDARD BUCKLE

1/2” Wide

3/4” Wide

BUCKLE SYSTEMS


Stainless SteelBanding Systems

BANDING

Banding is available in:

1/2” x 100ft Coils

3/4” x 100ft Coils

CHANNEL CLAMPS

1/2” WIDE SCREW BAND BUCKLE STRAPS

16” Lengths

18” Lengths

24” Lengths

36” Lengths

44” Lengths

1/2” WIDE BUCKLE STRAPS

18” Lengths

26” Lengths

36” Lengths

44” Lengths

3/4” WIDE BUCKLE STRAPS

18” Lengths

26” Lengths

36” Lengths

44” Lengths

BANDING SYSTEMS


Stainless SteelClip Sections

BACK TO BACK CLIPS

TWO BOLT CLIPS

TWO BOLTHEAVY DUTY ‘D’ CLIPS

TWO BOLT MINI ‘D’ CLIPS

ONE PIECE CLIPS

SQUARE &RECTANGULAR CLIPS

50mm

60mm

76mm

89mm

114mm

140mm

168mm

194mm

219mm

244mm

50mm

60mm

76mm

89mm

114mm

127mm

50mm

60mm

76mm

89mm

114mm

13mm

16mm

19mm

25mm

50 x 50mm

76 x 76mm

80 x 80mm

100 x 100mm

SIZE Ø


CompleteSmallOffset BracketAssemblies

CompleteLargeOffset BracketAssemblies

AluminiumOffset Brackets

SMALL & LARGE ALUMINIUM BRACKETS

Also available pre-punched

TWO PIECE UNI-CLAMP

76mm Diameter

SMALL & LARGE ALUMINIUM OFFSET BRACKET

WITH TEE SECTION ATTACHED

ALUMINIUM OFFSET BRACKETS & TWO PIECE UNI-CLAMP

150mm � � �

225mm � � �

300mm � � �

375mm � � �

450mm � � �

LENGTH PAINTED PAINTED MILLincorporating BLACK GREY FINISHTee Section (RAL 9005) (BS 381C/693)

150mm � � �

225mm � � �

300mm � � �

375mm � � �

450mm � � �

600mm � � �

750mm � � �

900mm � � �

LENGTH PAINTED PAINTED MILLincorporating BLACK GREY FINISHTee Section (RAL 9005) (BS 381C/693)


BCPComposite Sheet Aluminium features Al-Mn alloy series 1100

Sheet thickness 0.3mm

Panel exterior surface Gloss

Polyester coating 20 microns

Protective plastic film 50 microns

Panel interior surface Matt

Standard size 2440 x 1220 x 2mm

3050 x 1500 x 2mm

Not all sizes are listed. 3050 x 1000 x 3mm

Please contact your local 2440 x 1220 x 3mm

Blackburns Sales Office 3050 x 1500 x 3mm

for more information. 4050 x 1500 x 3mm

3050 x 1250 x 4mm

3050 x 1500 x 4mm

4050 x 1500 x 4mm

Standard colours in 3mm

2mm / 4mm thickness

Available in White only

Customer specials require a minimum run of 600m2

RAL 9016

RAL 5002RAL 5022

RAL 3020

RAL 6024

RAL 1023

BronzeMetallic

RAL 9006RAL 9005

RAL 1015

BrushedAluminium

Mirror PolishedSilver

Mirror PolishedGold

BLACKBURNS COMPOSITE PANEL (BCP)

RAL 6005


BCP (POLYESTER COATING) SHEET SPECIFICATIONS

PANEL DIMENSIONS

Panel Thickness 2mm / 3mm / 4mm

Aluminium Thickness 0.3mm

Sheet Weight 3.17m2.k / 4.27m2.k / 5.10m2.k

Thickness ±0.1mm

Width -1mm ~ +2mm

Length -1mm ~ +3mm

Diagonal ≤3mm

Thermal Expansion ≤4.00 x 10 -5 / oC

Aluminium Thickness ±0.02mm

Paint Thickness (micron) ≥20

Pencil Hardness ≥HB

Toughness of coating ≤HB

Impact Strength 50kg . cm2, Excellent, without crack

Boiling Water Resistance Boiling for ≥2hrs in 99oC±1 without change

Acid Resistance No Change (Immerse in 2% HCl 24hrs)

Alkali Resistance No Change (Immerse in 2% NaOH 24hrs)

Solvent Resistance No Change (Cleaned x100, with Xylene by 1kgf)

Cleaning Resistance No Change (Immerse in 20# Engine Oil 24hrs)

Peel Strength 180o ≥5.8 N/mm

Temperature Resistance 50 to 90oC

Sound Absorption NRC 0.05

Sound Attenuation Rw db 27 / 28 / 29

Water Absorption % by Vol. 0.01

Thermal Performance Thermal Deforming ≥105oC - ASTM D 648-01

Thermal Resistance 0.033 (m2.k) / W

Thermal Conduction Coefficient 5.31W / m2.k

Core Composition High Pressure LDPE Polyethylene

DIMENSIONAL TOLERANCES

SURFACE PROPERTIES

PRODUCT PROPERTIES (2mm / 3mm / 4mm)


BCPHoarding Panel

BCPComposite Sheet

BCPComposite Tray BCP COMPOSITE TRAY SIGNS MADE TO ORDER...

Blackburns Metals Limited offer an in-house service to manufacture BCPinto return-edge signs.

Sign Channels can also be attached using the blind rivet system.

BCP FOR ALL YOUR SIGN MAKING NEEDS...

Due to the excellent hard smooth finish, BCP lends itself extremely wellto sign manufacture. BCP can be digitally or screen printed, have vinyllettering and sheet applied and can also be spray painted. Combinedwith the pre-finished coloured polyester coating, it is truly a remarkableproduct for creating signs that can be shaped and formed, with a unique,hardwearing finish that exudes quality. A range of colours and finishes areavailable from our branches throughout the UK.

If you have a requirement for a specific RAL or Pantone colour then pleasecontact your local Blackburns sales team, we also provide a range offinishes from granite and timber effects to metallics in many colours.

2440 x 1220 x 2mm �

2440 x 1220 x 3mm � �

3050 x 1500 x 3mm �

(Aluminium skin thickness 0.21mm)

WHITE WHITE WHITESIZE (RAL 9016) (RAL 9016) (RAL 9016)

MATT BOTH SIDES MATT ONE SIDE MATT / GLOSS

300mm

450mm

600mm

750mm

900mm

1200mm


BCP CIRCLES (DIAMETER) - STANDARD ROAD TRAFFIC SIZES

600mm

750mm

900mm


BCP TRIANGLES (VERTICAL HEIGHT) - STANDARD ROAD TRAFFIC SIZES


Stainless SteelSheetSatin Polished 2500 x 1250 x 0.7mm T304

(One Side 240s) 2500 x 1250 x 0.9mm T304

2500 x 1250 x 1.2mm T304

2500 x 1250 x 1.5mm T304

2500 x 1250 x 3.0mm T304

Satin Polished 2500 x 1250 x 0.7mm T316

(One Side 240s) 2500 x 1250 x 0.9mm T316

2500 x 1250 x 1.2mm T316

2500 x 1250 x 1.5mm T316

2500 x 1250 x 3.0mm T316

Mirror Polished 2500 x 1250 x 0.7mm T304

(One Side) 2500 x 1250 x 0.9mm T304

Sheets are available in other gauges and sizes on request

FINISH SIZE TYPE


GRP Circles

GRP Triangles

GRP Sheet

300mm

450mm

600mm

750mm

900mm

1200mm

1500mm


CIRCLE SIZES (DIAMETER)

600mm

750mm

900mm

1200mm

1500mm


TRIANGLE SIZES (VERTICAL HEIGHT)

8’ x 4’ x 3.2mm (also available in white)

10’ x 5’ x 3.2mm


SHEET SIZE

All GRP Sheet sizes can be supplied with Sign Channels attached usinga blind rivet system.

TABLE 2

Note: These self-piercing rivets are supplied with either a silver or blackKalgard finish and are available from either Bollhoff or Henrob.

RIVET PART NO. R20845CK02 R20845C05

RIVET LENGTH 8mm 8mm

RIVETING THICKNESS 4mm 6mm

SIGN FACE GRP GRP

STIFFENER Aluminium Aluminium

BOLLHOFF / HENROB RIVET RECOMMENDATIONS


SIGN CONSTRUCTION

The adherable sign face can be applied to either face of the GRP Panels.

STIFFENING AND RIVETING

Support channels may be secured to the back of the panels by thefollowing methods:

• BOLLHOFF non-penetrating rivet system.• Adhesives using 3M 4980 VHB Tape or 3M Scotchweld DP 460.

SUPPORT RAIL RECOMMENDATIONS

GRP Sheet has good tensile strength and impact resistance. The nature ofGRP is that it is more flexible than Aluminium. To obtain the best use andservice life it is recommended that the support rails, which providestiffening, are fixed in accordance with Table 1.

TABLE 1

SUPPORT RAILS SHOULD BE FIXED A MINIMUM OF 30MM FROM THE RUNNING EDGE OF

THE SIGN. IF A SHEET JOINING SECTION IS TO BE FITTED BY MEANS OF RIVETING, THEN

THE RIVET SHOULD NOT BE WITHIN 15MM OF THE SHEET EDGE.

GRP Sheet is available in 3.2mm thickness. When fixing aluminiumsupport rails by means of a non-penetrating rivet system, a maximum rivetspacing of 150mm should be adopted.

Note: GRP Sheet signs will flex more than Aluminium signs of the samesize until they are mounted on posts, hence it is advisable to storecompleted signs flat or with support rails vertical to prevent possibledamage to the sign facings.

BOLLHOFF / HENROB RIVET RECOMMENDATIONS

Due to the different properties of the Aluminium alloy and GRP sign plateused for signs, it is necessary to change rivets for each material thicknessas per Table 2 (page 16).

• DO NOT rivet within 15mm from the edge of the GRP sign plate.• Riveting pressure may need to be adjusted to suit the ductility of

the materials being rivetted.• Should not be necessary to change Upsetting Die or Nose Assembly.

0.50m 2 400mm

0.75m 3 325mm

0.90m 3 400mm

1.00m 4 300mm

1.20m 4 366mm

1.50m 5 350mm

1.75m 6 380mm

2.00m 7 317mm

2.25m 8 340mm

2.44m 8 335mm

SIGN SECTION HEIGHT NO. OF RAILS MAX. RAIL SPACING


Pre-AnodisedSheet

AVAILABLE IN A WIDE RANGE OF COLOURS AND FINISHES...

Lorin products are produced by our partner, the world’s largest pre-anodiser of aluminium. Lorin’s name has become synonymous withproduct ingenuity, consistent quality and innovative surface design. Lorinpre-anodised products are suitable for many applications whereaesthetics, durability and distinctive decor are required.

Blackburns Metals are the UK’s sole distributor for these unique productsand have in stock a wide range of colours and finishes, from bright tospecial finishes, including patterned and colour anodised sheet and coil.

Bright Silver 1219mm x 610mm x 0.5mm

Bright Gold 1219mm x 610mm x 0.5mm

Bright Copper 1219mm x 610mm x 0.5mm

Brushed Silver 1219mm x 610mm x 0.635mm

Brushed Gold 1219mm x 610mm x 0.5mm

Hammertone 1850mm x 610mm x 0.5mm

Alumaplus 2500mm x 1232mm x 0.9mm

Alumaplus 2500mm x 1232mm x 1.2mm

Duramatt 1219mm x 610mm x 0.5mm

SHEET FINISH SIZE


Patterned Sheet

PROVIDINGDRAMATIC, DECORATIVESURFACE DESIGN...

For use in interior andexterior flooring andcladding, providingdramatic decorativesurface design.

All our Patterned Sheetsare available in variousfinishes and colours,including bright polishedfinishes and an anodisedcolour range available insmall batches. The onlylimitation to the colourand finish is thedesigners imagination.

Patterned Sheet isavailable in a wide rangeof sheet sizes andthicknesses to suit yourapplication, we can supplybespoke panel sizes andfabricate to yourrequirements.

Please contact your localBlackburns Sales office formore information.

Five Bar Treadplate

Propeller

Triple Grip

Circle Polish

Five Bar Treadplate 2000mm x 1000mm x 2.0mm 11.3 kg

2500mm x 1250mm x 2.0mm 17.6 kg

3000mm x 1500mm x 2.0mm 25.3 kg

2000mm x 1000mm x 3.0mm 16.7 kg

2500mm x 1250mm x 3.0mm 26.0 kg

3000mm x 1500mm x 3.0mm 37.5 kg

2000mm x 1000mm x 4.5mm 23.3 kg

2500mm x 1250mm x 4.5mm 39.5 kg

3000mm x 1500mm x 4.5mm 56.9 kg

2000mm x 1000mm x 6.0mm 34.1 kg

2500mm x 1250mm x 6.0mm 53.2 kg

3000mm x 1500mm x 6.0mm 76.6 kg

Propeller 2500mm x 1250mm x 1.5mm 13.6 kg

3000mm x 1500mm x 3.0mm 40.6 kg

Triple Grip 2500mm x 1250mm x 1.5mm 13.9 kg

2500mm x 1250mm x 2.0mm 18.1 kg

2500mm x 1250mm x 3.0mm 26.6 kg

Circle Polish 2500mm x 1250mm x 0.9mm 23.0 kg

Mirror Polish 2500mm x 1250mm x 0.7mm 17.9 kg

2500mm x 1250mm x 0.9mm 23.0 kg

2500mm x 1250mm x 1.2mm 30.7 kg

SHEET FINISH SIZE WEIGHT

1.5mm also available, contact your local Blackburns for furtherinformation, see back cover for location and contact details


PLASTISOL CoatedSteel Circles

PLASTISOL CoatedSteel Triangles

PLASTISOL CoatedSteel Sheet

PLASTISOL Coated Steel Circles 300mm

450mm

600mm

750mm

900mm

1200mm

PLASTISOL Coated Steel Triangles 600mm

750mm

900mm

1200mm

PLASTISOL Coated Steel Sheet 2500mm x 1200mm x 1.2mm

SHAPE SIZE

All PLASTISOL Panel sizes can be supplied with Sign Channels attachedusing a blind rivet system.

RESISTANCE TO AGGRESSIVE SUBSTANCES

• Acids: very good

• Alkalis: very good

• Chlorine solvents: good- Aromatic: average- Alcoholic: very good- Alphatic: good

• Mineral oils: Resistance depends on the gas or liquid concentrations, and whether there is permanent contact.In all cases please consult us.

PROPERTIES OF PVC PLASTISOL

Total dry film thickness: . . . . . . . . . . . . . . . . . . . . . . . . . . .200 micronsCoating finish: . . . . . . . . . . . . . . . . . . . . . . . . . . .Leathergrain embossGloss level: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30 - 40%Maximum ambient temperature: . . . . . . . . . . . . . . . . . . . . . . . . . .60°CMinimum forming temperature: . . . . . . . . . . . . . . . . . . . . . . . . .+10°CMinimum bending radius: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .OTScratch resistance: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3500gCorrosion resistance:1. Salt spray . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1000 hours2. Humidity cabinet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1000 hoursReverse coat: Although the coat on the reverse side is usually notrequired to have UV resistance, it must still be corrosion resistant andhighly adhesive. On a well cleaned and chemically pre-treated surface,the primer and epoxy coats on the reverse side provide a coating thatfully meets these requirements.


PERFORMANCE

The time period before first maintenance is needed varies from 10 to 17years, depending on the environment, profile, orientation and colour.

INFORMATION

Polyvinyl chloride based thermoplastic resin (PVC Plastisol) particularlysuitable for industrial applications. This coating is available in coil or cut-length form supplied on hot-dipped galvanised substrate.

This products has good corrosion resistance and good handle-ability dueto the thickness of the coating. it has excellent formability characteristicsand is suited for Road Sign manufacture.

Standard colours are Road Traffic Grey and Black.

EMBOSSED PLASTISOL 200�m

Recommended for aggressive atmospheres: urban sites, chemicalindustry, coastal zones.

COATING TECHNICAL PROPERTIES

Thickness (thicknesses are nominal values)

• Embossed Plastisol 200�m - 5�m (primer) + 195�m

• Protection: None or FST film

Flexibility

• Bending: (up to 1.5mm) OT on galvanised

• Drawability: good

• Shock resistance: excellent

Heat Resistance

• Maximum continuous temperature: 60°C

• Fire classification: M1

CHEMICAL CHARACTERISTICS

Corrosion resistance

• Tropical test: 1000 hours

• ECCa T8 Salt Spray Test: 1000 hours


RAL Colour Guide

PLEASE NOTE:This guide is for illustrationpurposes only. Colours willvary slightly due to CMYK

printing ink conversion.

RAL 1001 RAL 1002 RAL 1003 RAL 1006

RAL 1007 RAL 1012 RAL 1013 RAL 1014

RAL 1015 RAL 1016 RAL 1018 RAL 1019

RAL 1021 RAL 1023 RAL 2000 RAL 2001

RAL 2002 RAL 2009 RAL 3000 RAL 3001

RAL 3002 RAL 3003 RAL 3004 RAL 3005

RAL 3007 RAL 3009 RAL 3011 RAL 3012

RAL 3015 RAL 3020 RAL 3027 RAL 4004

RAL 4005 RAL 5000 RAL 5002 RAL 5003

RAL 5004 RAL 5005 RAL 5007 RAL 5008

RAL 5009 RAL 5010 RAL 5011 RAL 5012

RAL 5013 RAL 5014 RAL 5015 RAL 5017


Can’t find thecorrect colour?

If you require a differentRAL colour, or colourswatch please contactyour local BlackburnsSales office.


RAL 5018 RAL 5019 RAL 5021 RAL 5022

RAL 5024 RAL 6000 RAL 6001 RAL 6002

RAL 6003 RAL 6004 RAL 6005 RAL 6006

RAL 6007 RAL 6009 RAL 6010 RAL 6011

RAL 6012 RAL 6016 RAL 6017 RAL 6018

RAL 6019 RAL 6020 RAL 6021 RAL 6024

RAL 6025 RAL 6026 RAL 6027 RAL 6028

RAL 6029 RAL 6032 RAL 7000 RAL 7001

RAL 7004 RAL 7005 RAL 7006 RAL 7010

RAL 7011 RAL 7012 RAL 7015 RAL 7016

RAL 7021 RAL 7022 RAL 7024 RAL 7026

RAL 7030 RAL 7031 RAL 7032 RAL 7033


RAL Colour Guide(continued...)

PLEASE NOTE:This guide is for illustrationpurposes only. Colours willvary slightly due to CMYK

printing ink conversion.

Can’t find thecorrect colour?

If you require a differentRAL colour, or colourswatch please contactyour local BlackburnsSales office.


RAL 7035 RAL 7037 RAL 7038 RAL 7039

RAL 7040 RAL 7042 RAL 7043 RAL 7044

RAL 8003 RAL 8004 RAL 8007 RAL 8011

RAL 8012 RAL 8014 RAL 8015 RAL 8016

RAL 8017 RAL 8019 RAL 8024 RAL 8040

RAL 8070 RAL 8080 RAL 9001 RAL 9002

RAL 9003 RAL 9004 RAL 9005 RAL 9010

RAL 9011 RAL 9016 RAL 9018 CALL BLACKBURNS...

NEED ANOTHERCOLOUR?



109ARCHITECTURAL / SURFACE DESIGN - Nationwide Supply Solutions...

DECORBRITE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .110

PATTERNED ALUMINIUM SHEET . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .114

SUBLIMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .115

COMPOSITE SHEET . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .116

PRE-ANODISED PRODUCTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .117

FIXTURES & FITTINGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .118

GLAZING BAR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .146


Blackburns Architectural / Surface Design...

Blackburns is one of the countries leading nationwide distributors of Aluminium,

Stainless Steel and other semi-finished non-ferrous products. Its name is synonymous

with quality and high service levels throughout the architectural market sector, with a

reputation for innovative products and architectural metal designs.


Ideal for diverse architecture and decorative design...

Decorbrite is produced on continuous coil processing lines underconstant technological development, capable of providing the widestpossible range of products, from mirror finish to satin matt, brushedfinishes and special mechanical textures.

DEPENDABILITY

While having a low specific weight, Decorbrite also guarantees a highmechanical strength and chemical resistance. It is chemically inert,does not corrode and maintains its beautiful hi-tech appearance overa long period of time.

QUALITY

Decorbrite is manufactured using processes that assure a high level ofproduct quality. The use of continuous coil treatment guarantees theformation of a uniform anodic oxide film with a perfectly homogeneousaesthetic appearance and uniform surface protection.

VERSATILITY

Pre-anodised Aluminium is an extraordinarily flexible and versatilematerial, able to take up a diverse range of forms to meet the creativeneeds of design and industry. Malleable and ductile, it lends itself tomany internal architectural applications such as structural anddecorative components. It can also be easily bonded to othermaterials.

ECO-FRIENDLINESS

Decorbrite is the natural choice for eco-friendliness. It is totallyrecyclable and is produced using ecologically safe products andprocesses. It therefore makes the ideal environmental choice tocomplete any project, from large scale panelling to small decorativearticles, providing the intelligent choice for both the present and thefuture.

ARCHITECTURE, SURFACE AND STRUCTURE

The successful growth of pre-anodised aluminium in the architecturalfield is a clear indication of the unique characteristics, which make thismaterial the natural ally of the designer.

The capability to combine maximum adaptability with aesthetic impactmakes Decorbrite the ideal choice for decorative panelling andcladding while its low density allows the development of structuresthat are particularly light but at the same time strong.

Decorbrite

111Architectural / Surface Design - DECORBRITE

DESIGN OBJECTIVES AND IDEAS

Contemporary creative design has discovered pre-anodised aluminiumand transformed it into the preferred material for expressing designideas of every form, from exclusive accessories in limited editions tomass produced components. The excellent malleability and formabilityof Decorbrite and its wide range of reflective and decorative surfaceeffects makes it the ideal solution for projects in both high volume andexclusive individual designs. Easy to shape onto other components,Decorbrite is an ideal surfacing material for a multitude of products oforiginal and innovative design.

INTERIORS HI-TECH FUNCTIONALITY

Suitable for use as both a structural element and a bonded surfacelayer, Decorbrite is a valuable aid to design and production in alldecorative fields. Ideal for use in accessories and hi-tech solutions,such as kitchens and furniture in contact with foods and liquids, it alsoproves itself functional and aesthetically outstanding in many otherapplications. In this sector of the industrial market, Decorbrite confirmsthe many advantages of its versatility, facilitating the creation of variousshape and surface finish combinations. Its specific characteristics ofcorrosion resistance and stability in all conditions of use complete thescenario of technical applicability, which makes this material the newreference for contemporary interiors.


Technical Data

THE CHARACTERISTICS OF DECORBRITE

Each of the Decorbrite products is characterised by its distinctiveaesthetic appearance, obtained by a combination of mechanical rolltexturing and successive chemical treatments.

The key finishing processes are electrolytic brightening, which confersgloss and surface homogeneity, and anodising, during which thealuminium surface layers are converted into a thin hard layer ofaluminium oxide that is completely transparent and very resistant. inthis manner the resulting composite structure combines the inherentnature of aluminium metal with the surface properties of chemicalinertness, high surface hardness, resistance to chemical agents, anti-static character and resistance to scratching and finger marks.

The careful control of processes and parameters used at each stage ofthe material’s production guarantees constant product characteristics. The Decorbrite range is environmentally friendly as it contains no resinsor solvents, is completely recyclable and, compared to steel, has theadvantage of light weight (2,7g/cm3 against 7,9g/cm3 for steel).Thanks to its high formability, Decorbrite gives flight to the designer’sfantasies in every environment for a multitude of applications.

AVAILABILITY

We carry a standard range of material in coil form, enabling us to slitand cut to length on our in-house coil processing facilities providingthe opportunity to satisfy immediately the demand of the designer,architect or sub-contractor requiring bespoke sizes or finishes.

Decorbrite is exclusive to Blackburns Metals in the United Kingdomand Ireland.

Decorbrite

113Architectural / Surface Design - DECORBRITE


Providing dramatic decorative surface design...

For use in interior and exterior flooring and cladding, providingdramatic decorative surface design.

All of our patterned sheets are available in various finishes, colours,including bright polished finishes and an anodised colour rangeavailable in small batches. The only limitation to the colour and finishis the designer or architects imagination.

Available in a wide range of different sheet sizes and thicknesses to suityour application, we can supply bespoke panel sizes and fabricate toyour requirements.

PATTERNED ALUMINIUM SHEET

• Five Bar Treadplate

• Triple Grip

• Propeller

• Stucco

PatternedAluminium Sheet

Five Bar Treadplate

Propeller

Triple Grip

Stucco

115Architectural / Surface Design - PATTERNED SHEET / SUBLIMATION

The leading supplier of sublimation aluminium...

For many in the architectural and interior design sectors, sublimationproducts are a totally new concept, although sublimation printing is afamiliar term within the printing industry.

So what is sublimation printing? It is a procedure of transferring fullcolour graphics or photographs onto a wide selection of products.These include metals, ceramics and unisub plastics and glass items allspecially pre-coated and therefore sublimation receptive.

Our focus is aluminium and we are the leading supplier of sublimationaluminium in the UK and many worldwide markets, through keydistribution customers.

We believe the opportunities for aluminium sublimation offer interiordesigners in particular, an innovative opportunity to apply bespokedesigns and photographs onto aluminium panels for interior décor.

Sublimation


Architectural and surface design...

Aluminium composite sheet is particularly suitable for architectural andsurface design applications, due to its high strength, rigidity anddurability. This rigidity is achieved by its construction of a polythenecore sandwiched between two thin aluminium sheets.

This combination of products and manufacturing process provides aproduct that can be up to a third of the weight for the same rigidity ofmore traditional architectural cladding and panelling products, it isclear to see why this has become a firm favourite for decorative andcladding solutions.

All of our composite panels are available pre-finished in polyesterpaint, offering a five year product guarantee. In addition to standardcolours, any colour is available providing you can satisfy a minimumproduction run. All colours are available in an anti-graffiti finish whichis particularly popular for communal access areas.

We can also provide Special finishes, from granite and timber effect tometallic and polished metals. These special finishes offer many diverseopportunities for both the architect and the interior designer.

Our composite panels can be digitally and screen-printed and can alsobe spray painted, facilitating the opportunity for bespoke surfacedesign.

Composite Sheet

117Architectural / Surface Design - COMPOSITE / PRE-ANODISED

Pre-anodised panels for interior & exterior applications...

Lorin products are produced by our partner, the world’s largest pre-anodiser of aluminium coil, in the United States. Lorin’s name hasbecome synonymous with product ingenuity, consistent quality andinnovative surface design.

INTERIOR APPLICATIONS

Lorin pre-anodised products are suitable for many interior applicationswhere aesthetics, durability and distinctive interior décor is required.These include ceiling systems, panelling, partitions, framing and worksurfaces.

One such innovative product is Alumaplus, which is a stainless steellook alike with one third of the weight of stainless steel. Alumaplus hasgreater finger print resistance, forms to tighter tolerances and hashigher formability than stainless steel. These attributes makeAlumaplus an ideal alternative in many architectural and surface designapplications, such as kitchens, washrooms, reception areas, point ofdisplay and medical display areas.

EXTERIOR APPLICATIONS

Lorin pre-anodised aluminium is not limited to interior design andprovides excellent opportunities for cladding, roof finishes and trimsand has been used widely in both commercial and domesticarchitectural and design applications throughout the world.

AVAILABILITY

Blackburns Metals are the UK sole distributor for these uniqueproducts and have available from stock, a wide range of colours andfinishes from bright to special finishes, including patterned andcoloured anodised coil.

Our in-house process centre has the ability to slit and cut to length tothe bespoke sizes specified by the customer.

Pre-AnodisedProducts

CROSINOX - Stainless steel modular system...

Blackburns Metals has recently extended its stock of stainless steelarchitectural products to include the Crosinox range of stainless steelfixtures and fittings, including the complete range of handrail fittings.The extensive Crosinox range is available in grades 304 and 316 witha 240 grit satin polish as standard. Full details including installationinstructions are available on www.crosinox.com or contact your localBlackburns for further information.


119Architectural / Surface Design - FIXTURES & FITTINGS

TUBES & BARS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .120

GLASS CLAMPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .122

END CAPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .126

FLOOR MOUNTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .128

SIDE MOUNTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .130

HANDRAIL BRACKETS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .132

ACCESSORIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .135

HANDRAIL HOLDERS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .136

CROSSBAR HOLDERS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .137

FITTINGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .138

WOODLINE FITTINGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .142

SLOTTED TUBE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .144


Blackburns Fixtures & Fittings...

CROSINOX - Stainless steel modular system...

Blackburns Metals has recently extended its stock of stainless steel architectural

products to include the Crosinox range of stainless steel fixtures and fittings,

including the complete range of handrail fittings. The extensive Crosinox range is

available in grades 304 and 316 with a 240 grit satin polish as standard. Full details

including installation instructions are available on www.crosinox.com or contact

your local Blackburns for further information.

� Blue item = Exstock UKRed item = Special Order

Delivery 7-10 days subject to availability


Tube

Solid Bar

Item No. Material Dimensions Ø

E001 AISI 304 42.4 x 2mm L=3000� E001/6 AISI 304 42.4 x 2mm L=6000

E001/S AISI 316 42.4 x 2mm L=3000� E001/6/S AISI 316 42.4 x 2mm L=6000

E0012 AISI 304 48.3 x 2mm L=3000� E0012/6 AISI 304 48.3 x 2mm L=6000

E0012/S AISI 316 48.3 x 2mm L=3000� E0012/6/S AISI 316 48.3 x 2mm L=6000


E005 AISI 304 12mm L=3000� E005/6 AISI 304 12mm L=6000

E005/S AISI 316 12mm L=3000� E005/6/S AISI 316 12mm L=6000

All items in stock are also available with a 2.5mm wall

121Fixtures & Fittings - TUBES & BARS


E003 AISI 304 42.4 x 900mmE003/S AISI 316 42.4 x 900mmE003/48 AISI 304 48.3 x 900mmE003/48/S AISI 316 48.3 x 900mm

TubePRE-DRILLED WITH

5 HOLES, TO SUIT

CROSS BAR HOLDERS

(M5 HOLE)




4 HOLES, TO SUIT

CROSS BAR HOLDERS

(M5 HOLE)




6 HOLES, TO SUIT

CROSS BAR HOLDERS

(M5 HOLE)


E03/1 AISI 304 42.4 x 900mmE03/1/S AISI 316 42.4 x 900mmE03/1/48 AISI 304 48.3 x 900mmE03/1/48/S AISI 316 48.3 x 900mm


2 HOLES, SINGLE SIDE,

TO SUIT CROSS BAR

HOLDERS (M8 HOLE)




4 HOLES, 90O,

TO SUIT CROSS BAR

HOLDERS (M8 HOLE)




2 HOLES, IN LINE,

TO SUIT CROSS BAR

HOLDERS (M8 HOLE)


Zinc Glass ClampFOR 8mm, 8.75mm, 10mm

* ONLY 6mm - 8mm

** 10.76mm - 12.76mm

Item No. Application Material Dimensions

E00740 flat back Zinc 43 x 59mmE00741* flat back Zinc 38 x 49mmE00743* flat back Zinc 38 x 49mmE007401 for tube Ø 42.4mm Zinc 43 x 59mmE007402 for tube Ø 48.3mm Zinc 43 x 59mmE007403** flat back Zinc 43 x 59mmE007405** for tube Ø 48.3mm Zinc 43 x 59mm

Zinc Glass ClampFOR 8mm, 10mm

* ONLY 6mm - 8mm


E00760 for tube Ø 42.4mm Zinc 55 x 55mmE00761 for tube Ø 48.3mm Zinc 55 x 55mmE00762 flat back Zinc 55 x 55mmE00766* for tube Ø 42.4mm Zinc 43 x 43mmE00767* for tube Ø 48.3mm Zinc 43 x 43mmE00768* flat back Zinc 43 x 43mm

Stainless SteelGlass ClampFOR 8mm, 10mm


E0093 flat back AISI 316 53 x 53mmE0092 for tube Ø 42.4mm AISI 316 53 x 53mmE00921 for tube Ø 48.3mm AISI 316 43 x 43mmE00931 flat back AISI 316 43 x 43mm

123Fixtures & Fittings - GLASS CLAMPS


� E0091 flat back AISI 316 43 x 59mmE00911 flat back AISI 316 38 x 49mm

� E00973* flat back AISI 316 53 x 64mmE0091/HP** flat back AISI 316 43 x 59mmE00911/HP** flat back AISI 316 38 x 49mm

Stainless SteelGlass ClampFOR 8mm, 8.75mm

10mm GLASS

* 10.76mm - 12.76mm

** MIRROR POLISHED

Stainless SteelGlass ClampFOR 6mm, 8mm

8.75mm, 10mm GLASS

** MIRROR POLISHED


� E009 for tube Ø 42.4mm AISI 316 43 x 59mm� E0090 for tube Ø 48.3mm AISI 316 43 x 59mm

E00912 for tube Ø 42.4mm AISI 316 38 x 49mmE0090/HP** for tube Ø 42.4mm AISI 316 43 x 59mmE00912/HP** for tube Ø 48.3mm AISI 316 43 x 59mm

Stainless FinishGlass ClampFOR 10.76mm - 12.76mm


� E00982 for tube Ø 48.3mm AISI 316 55 x 55mm� E00983 flat back AISI 316 55 x 55mm


Item No. Application Material Dimensions Ø

E00990 flat back AISI 316 60 x 35mmE00991 for tube Ø 42.4mm AISI 316 60 x 35mmE00992 for tube Ø 48.3mm AISI 316 60 x 35mm

Item No. Material For

DS01/M6 AISI 304 M6DS01/M6/S AISI 316 M6DS01/M8 AISI 304 M8DS01/M6/S AISI 316 M8

Stainless SteelGlass Clamp

FOR 8mm, 8.75mm

10mm GLASS

Glass ClampFOR 8mm, 10mm

10.76mm GLASS



Glass ClampFOR 12mm - 12.76mm

GLASS

Item No. Application Dimension

EG/L For Series E 00911 6mmEG/S For Series E 0091 6mm

6mmRubber Insert

125Fixtures & Fittings - GLASS CLAMPS



Glass ClampFOR 8mm, 10mm

10.76mm GLASS



Item No. Application Material

E40571 flat back AISI 316 M12 x 50E40573 for tube Ø 42.4mm AISI 316 M12 x 50E40574 for tube Ø 48.3mm AISI 316 M12 x 50


E00950/H for tube Ø 42.4mm AISI 316 52 x 64mmE00950/V for tube Ø 42.4mm AISI 316 52 x 64mmFor various sizes visit the website for more information...

Glass ClampFOR 12mm -12.76mm

GLASS

Glass ClampØ 70mm MAX: 18mm

Glass ClampFOR 8mm -10mm GLASS


127Fixtures & Fittings - END CAPS

End CapsItem No. Application Material Dimensions

� E4090 for tube Ø 42.4mm AISI 316 2.0 - 2.6� E316 for tube Ø 42.4mm AISI 304 2.0 - 2.6� E4091 for tube Ø 48.3mm AISI 316 2.0 - 2.6

E4092 for tube Ø 60.3mm AISI 316 2.0 - 2.6


E465 for tube Ø 42.4mm AISI 316 42.4 x 2mmE466 for tube Ø 48.3mm AISI 316 48.3 x 2mm


� E01151 for tube Ø 42.4mm x 2mm AISI 304 42.4 x 8mm� E01152 for tube Ø 48.3mm x 2mm AISI 304 42.4 x 8mm


E0119 for tube Ø 42.4mm x 2mm AISI 304 42.4 x 8mm� E4120 for tube Ø 42.4mm x 2mm AISI 316


E4100 for tube Ø 42.4mm x 2mm AISI 316


E4141 for tube Ø 42.4mm x 2mm AISI 316E4142 for tube Ø 48.3mm x 2mm AISI 316


� E4130 for tube Ø 42.4mm x 2mm AISI 316 M8� E4136 for tube Ø 48.3mm x 2mm AISI 316 M8


E4110 for tube Ø 42.4mm x 2mm AISI 316 M8


Floor Base

Floor Base

Item Application Material Dimensions No.

E4141 for tube Ø 42.4mm x 2mm AISI 316 100 x 100 x 6mmE4142 for tube Ø 48.3mm x 2mm AISI 316 100 x 100 x 6mm

Floor Base Item No. Application Material Dimensions Ø

�E403 for tube Ø 42.4mm AISI 316 100 x 85mm�E403/483 for tube Ø 48.3mm x 2.6mm AISI 316 100 x 85mm

Floor BaseALUMINIUM FOR GLUE


E014 for tube Ø 42.4mm Aluminium 38 x 100mmE016 for E014 Aluminium Ø 75 x 8mm


�E40310 for tube Ø 42.4mm x 2mm AISI 316 100mmE40310/26 for tube Ø 42.4mm x 2mm AISI 316 100mm

�E40320 for tube Ø 48.3mm x 2mm AISI 316 100mm�E40320/26 for tube Ø 60.3mm x 2mm AISI 316 100mm

129Fixtures & Fittings - FLOOR MOUNTING

Cast Weldable BaseItem No. Application Material Dimensions Ø

�E40820 for tube Ø 42.4mm AISI 316 105 x 17mm�E40830 for tube Ø 48.3mm AISI 316 105 x 17mm

Profile BaseItem No. Application Material Dimensions Ø


Cover PlateItem No. Application Material Dimensions

E4078 for E404 AISI 316 102 x 102mmE40783 for E404/483 AISI 316 125 x 125mm

Cover PlateItem No. Application Material Dimensions Ø

�E4072 for E404 AISI 316 105 x 25mm�E4073 for E404/483 AISI 316 105 x 25mm

E019 for E404/483 AISI 304 82 x 15mm


Rectangular SideMounted Base

Circular SideMounted Base

Circular SideMounted Base

Side Mounted Base


�E406 for tube Ø 42.4 x 2mm AISI 316 180 x 90mm�E407 for tube Ø 48.3 x 2mm AISI 316 180 x 90mm


�E40350 for tube Ø 42.4 x 2mm AISI 316 100 x 10mm�E40350/26 for tube Ø 42.4 x 2.6mm AISI 316 100 x 10mm�E40360 for tube Ø 48.3 x 2mm AISI 316 100 x 10mm�E40360/26 for tube Ø 48.3 x 2.6mm AISI 316 100 x 10mm


E40300/424 for tube Ø 42.4mm AISI 316 100 x 10mm


E400 for tube Ø 42.4mm AISI 316 75 x 8mm

131Fixtures & Fittings - SIDE MOUNTING

Flexible HandrailSupport


E4474/424 for tube Ø 42.4 x 2mm AISI 304 75 x 57.5mmE4474/483 for tube Ø 48.3 x 2mm AISI 304 75 x 57.5mm

Flat BackFOR TUBE


E40590 flat back AISI 316 27 x 43mmE40592 for tube Ø 42.4mm AISI 316 27 x 43mm

SquareMounted Base


E401 for tube Ø 42.4mm AISI 316 100 x 100 x 6mm

Distance HolderItem No. Application Material Dimensions Ø

E01 for tube Ø 42.4mm AISI 304 20 x 15mm


Straight Saddle Item No. Application Material Dimensions

�E031 for tube Ø 42.4 x 2mm AISI 304 5 x 65mm�E031/S for tube Ø 42.4 x 2mm AISI 316�E031/483 for tube Ø 48.3 x 2mm AISI 304�E031/48S for tube Ø 48.3 x 2mm AISI 316

Adjustable Saddle Item No. Application Material Dimensions

�E030 for tube Ø 42.4 x 2mm AISI 304 95 x 65mm�E030/S for tube Ø 42.4 x 2mm AISI 316�E030/483 for tube Ø 48.3 x 2mm AISI 304�E030/48S for tube Ø 48.3 x 2mm AISI 316

Wall Support Item No. Application Material Dimensions Ø

�E0223 for tube Ø 42.4mm AISI 304 42.4 x 30mm


�E45910 for tube Ø 42.4mm AISI 316 84 x 100mm

Wall Support

133Fixtures & Fittings - HANDRAIL BRACKETS


E022 for tube Ø 42.4mm AISI 304 95 x 95mmE022/N for tube Ø 42.4mm AISI 316 95 x 95mm


E4586 for tube Ø 42.4 - 48.3mm AISI 316 95 x 65mm

Wall Support

Wall Support


135Fixtures & Fittings - ACCESSORIES

Aluminium GlueItem No. Application Dimensions

� E4054 Glue 50ml

Product CareItem No. Application Dimensions

E4051 Cleaning Spray 500mlE4052 Protection Spray 400mlE4051/CL Surface Cleaner 200ml

FixingsItem No. Application Dimensions

ES01 Glass Clamps M8 x 20 DIN912ES02 Handrail Holder M8 x 20 DIN966ES03 Round Bar Holder M8 x 20 DIN7991


Saddle Plate Item No. Application Material Dimensions

E01198 for tube Ø 42.4 - 48.3mm AISI 316 65 x 27mmE01197 for tube Ø 42.4 - 48.3mm AISI 304 65 x 27mm

90o Saddle Plate Item No. Application Material

E01198/90 for tube Ø 42 - 48.3mm AISI 316

Handrail Bracket Item No. Application Material Dimensions

E4583 flat back AISI 316 76 x 65mmE4583/424 for tube Ø 42.4mm AISI 316 76 x 65mm

FlexibleHandrail Bracket


E0225 for tube Ø 42.4mm AISI 316E02251 flat back AISI 316

137Fixtures & Fittings - HANDRAIL & CROSSBAR HOLDERS

Handrail BracketItem No. Application Material Dimensions Ø

E4582/424 for tube Ø 42.4 x 2mm AISI 316 hole 42mmE4582/483 for tube Ø 48.3 x 2mm AISI 316 hole 42mm

Handrail BracketItem No. Application Material Dimensions

E4584 flat back AISI 316 76 x 65mmE4584/424 for tube Ø 42.4mm AISI 316 76 x 65mm

Crossbar HolderEnd

Item Application Material Dimensions ØNo.

E40651 flat back AISI 316 22 x 30, 12.2mm holeE40650 for tube Ø 42.4mm AISI 316 22 x 30, 12.2mm hole

Crossbar HolderIntermediateFOR Ø 12mm


E0069 for tube Ø 42.4mm AISI 304 22 x 30mm�E4040 for tube Ø 42.4mm AISI 316 22 x 30mm�E4041 for tube Ø 48.3mm AISI 316 22 x 30mm�E4044 flat back AISI 316 22 x 30mm


90o Curved Elbow Item No. Application Material Dimensions

�E450 for tube Ø 42.4 x 2.0mm AISI 316 A = 65mm�E450/26 for tube Ø 42.4 x 2.6mm AISI 316 A = 65mm�E2002 for tube Ø 48.3 x 2.0mm AISI 316 A = 73mm�E2002/26 for tube Ø 48.3 x 2.6mm AISI 316 A = 73mm

90o Mitred Elbow Item No. Application Material Dimensions

�E451 for tube Ø 42.4 x 2.0mm AISI 316 A = 65mm�E451/26 for tube Ø 42.4 x 2.6mm AISI 316 A = 65mm�E2012 for tube Ø 48.3 x 2.0mm AISI 316 A = 67mm�E2012/26 for tube Ø 48.3 x 2.6mm AISI 316 A = 67mm

Adjustable Elbow Item Application Material DimensionsNo.

�E446 for tube Ø 42.4 x 2.0mm AISI 316 A=97mm B=22mmE446/26 for tube Ø 42.4 x 2.6mm AISI 316 A=97mm B=22mm

�E4462 for tube Ø 48.3 x 2.0mm AISI 316 A=109mm B=25mmE4462/26 for tube Ø 48.3 x 2.6mm AISI 316 A=109mm B=25mm

Internal Connector Item Application Material DimensionsNo.

�E455 for tube Ø 42.4 x 2.0mm AISI 316 A=54mm B=25.5mm�E455/26 for tube Ø 42.4 x 2.6mm AISI 316 A=54mm B=25.5mm�E2062 for tube Ø 48.3 x 2.0mm AISI 316 A=55mm B=25.5mm

E2062/26 for tube Ø 48.3 x 2.6mm AISI 316 A=55mm B=25.5mm

139Fixtures & Fittings - FITTINGS

FlushTee Connector

Item Application MaterialNo.

�E453 Flush Tee Connector to suit Ø 42.4 x 2.0mm AISI 316E453/26 Flush Tee Connector to suit Ø 42.4 x 2.6mm AISI 316

�E2042 Flush Tee Connector to suit Ø 48.3 x 2.0mm AISI 316E2042/26 Flush Tee Connector to suit Ø 48.3 x 2.6mm AISI 316

Flexible ElbowItem Application Material DimensionsNo.

�E4471 for tube Ø 42.4 x 2.0mm AISI 316 90mm x 90mm�E4471/26 for tube Ø 42.4 x 2.6mm AISI 316 90mm x 90mm�E4472 for tube Ø 48.3 x 2.0mm AISI 316 103mm x 103mm�E4472/26 for tube Ø 48.3 x 2.6mm AISI 316 103mm x 103mm

Wall FlangeItem Application Material DimensionsNo.



45o Mitred Elbow Item Application Material DimensionsNo.

�E2015 for tube Ø 42.4 x 2.0mm AISI 316 A=50mm�E2017 for tube Ø 48.3 x 2.0mm AISI 316 A=55mm

Adaptor Item Application Material DimensionsNo.

E454 for tube Ø 42.4 x 2.0mm AISI 316 A=27mm B=20mmE454/26 for tube Ø 42.4 x 2.6mm AISI 316 A=27mm B=20mmE2052 for tube Ø 48.3 x 2.0mm AISI 316 A=31mm B=22mm

End Connector Item Application MaterialNo.

E4842 for tube Ø 42.4 x 2.0mm AISI 316E4843 for tube Ø 42.4 x 2.6mm AISI 316

Elbow withWall Flange

(radius)

Item Application Material DimensionsNo.

E4561 for tube Ø 42.4 x 2.0mm AISI 316 A=84mm B=100mmE4562 for tube Ø 42.4 x 2.6mm AISI 316 A=94mm B=105mm

141Fixtures & Fittings - FITTINGS

AdjustableConnector


E4483 for tube Ø 42.4 x 2.0mm AISI 316 A=83mm B=60mmE4484 for tube Ø 42.4 x 2.6mm AISI 316 A=90mm B=69mm

Elbow withWall Flange(mitred)


E4566 Ø 42.4 x 2.0mm AISI 316 A=84mm B=65mm C=95mmE4567 Ø 42.4 x 2.6mm AISI 316 A=95mm B=67mm C=105mm


90o Radius Item Application Material Dimensions ØNo.

E600 for Ø 45mm AISI 304 45mm

Woodline Glue Item Application Material DimensionsNo.

2010 for E600/T Glue 20g

90o Mitred Item Application Material Dimensions ØNo.

E601 for Ø 45mm AISI 304 45mm


E603 for tube Ø 45mm AISI 304 45mm

Connector


E604 for tube Ø 45mm AISI 304 45mm

Flexible Elbow

143Fixtures & Fittings - WOODLINE FITTINGS

Nylon End CapConnector


E600/T for tube Ø 45mm Nylon 45mm

End CapsItem Application Material DimensionsNo.

E4260 for tube Ø 45mm AISI 304 45mmE4265 for tube Ø 45mm AISI 304 45mm


TubeLGD: 6000mm

Item No. Application Material Weight (kg)

� E1000424 for tube Ø 42.4mm AISI 304 ca.11� E1000483 for tube Ø 48.3mm AISI 304 ca.13� E1100424 for tube Ø 42.4mm AISI 316 ca.11� E1100483 for tube Ø 48.3mm AISI 316 ca.13

Vertical 90oItem No. Application Material Weight (kg)

� E1500100 for tube Ø 42.4mm AISI 316 0.362� E1500110 for tube Ø 48.3mm AISI 316 0.440

Horizontal 90oItem No. Application Material Weight (kg)

� E1400100 for NR Ø 42.4mm AISI 316 0.286� E1400110 for NR Ø 48.3mm AISI 316 0.400

Rubber Inserts Item No. Application

� E1999100 Insert to suit glass thickness 8 - 10.76mm for NR 42.4mm� E1999200 Insert to suit glass thickness 12 - 16.76mm for NR 42.4mm� E1999300 Insert to suit glass thickness 16.76 - 18mm for NR 42.4mm� E1999400 Insert to suit glass thickness 8 - 13mm for NR 48.3mm� E1999500 Insert to suit glass thickness 14 - 18mm for NR 48.3mm� E1999600 Insert to suit glass thickness 18 - 20.76mm for NR 48.3mm

145Fixtures & Fittings - SLOTTED TUBE

AdaptorItem No. Application Material Weight (kg)

E1300100 Adaptor for NR 42.4mm AISI 316 0.112E1300110 Adaptor for NR 48.3mm AISI 316 0.140

StraightConnector

Item No. Application Material Weight (kg)

� E1200100 for NR 42.4mm AISI 316 0.128� E1200110 for NR 48.3mm AISI 316 0.176

End CapItem No. Application Material Weight (kg)

� E1100100 NR 42.4mm AISI 316 0.098� E1100110 NR 48.3mm AISI 316 0.116


Glazing Bar The simple solution for commercial & domestic glazing

THE SYSTEM

Ezi-Glaze is a new patent glazing system to suit glass or polycarbonate,based on a simple range of components. It is suitable for pitched *and some vertical applications.

* Minimum recommended pitch 5 degrees.

KEY FEATURES

• Self draining channels

• Polycarbonate up to 35mm

• 6mm to 25mm single or double glazing

• Snap on aluminium capping requiring no screws

• Thermally broken to achieve acceptable u-values

• Suitable for both commercial and domestic applications

• EPDM gasket to both sides of glass providing good water tightness

147Architectural / Surface Design - GLAZING BAR

...simple through design, easy to install

APPEARANCE

Ezi-Glaze aluminium sections are to BS EN755-9: 2001 and available inmill finish or powder coated to most RAL and BS colours conformingto BS 6496. Thus offering maintenance free use.

PERFORMANCE

The Ezi-Glaze system has been designed to conform with therequirements of BS 5516: 1991 when installed with the manufacturersrecommendations.

Typical assembly detail for single glazed, 15º roof slope

Clearance for Roof Sheetexpansion/contraction

i.e. +/-15mm


Loading the Ezi-Glaze System

STAGE 1

For the type of glazing being installed, determine the appropriate loadconditions.

• Vertical Glazing subject to wind load and imposed load.

• Sloped Glazing subject to wind and snow load plus self weight andany imposed loads.

STAGE 2

Refer to standards relevant to the structure being erected.

• BS 6399 Part 1 - Dead Loads and Imposed Loads

• BS 6399 Part 2 - Wind Loads

• BS 6399 Part 3 - Snow Loads

• BS 5516 - Patent Glazing

STAGE 3

Determine combinations of loading conditions and check for worstcase that dictates choice of glazing bar or span limit.

• Combining self-weight and snow loads, or self-weight and imposedloads or whatever is deemed to give the worst case/limiting combination.

STAGE 4

The outcome will give the load on the glazing bar as uniform load perunit length or point load, plus load per unit length.

• Loads given per unit area can be converted to a load per unit length by multiplying by the glazing bar centres.

STAGE 5

Refer to Load v Span charts to determine bar configuration required tomeet the site conditions.

CHARTS KEY

6mm Glass16 and 25mm Polycarbonate plus 24mm SU35mm Polycarbonate

Glazing Bar(continued...)



Ezi-Glaze System Parts

PART NO. GB2 - 2m LengthsPART NO. S3 - 100m CoilsPART NO. S2 - 100m CoilsAll other sections - 6m lengths

All material can be cut and coated to the customersspecific requirements.

Glazing Bar(continued...)



Nationwide supply solutions for Aluminium,Stainless Steel and Non-Ferrous Alloys...

Blackburns is one of the countries leading nationwide stockholders of aluminium,

stainless steel and other semi finished non-ferrous products. Its name is synonymous

with high quality and service levels throughout both industry and the commercial

sectors with a reputation for innovative products and supply solutions.

A strategically placed nationwide network of sales and distribution centres provides

immediate stock availability and local service to a wide range of industries and

market sectors, with what is probably the most comprehensive product range and

processing facilities in the UK. Local stock is enhanced by a central facility which

carries over 10,000 tonnes of material in over 200,000 square feet, all of which is

available on a daily basis to each of our centres throughout the UK, ensuring

ongoing stock availability.

Focused on the requirements of our customers, a significant investment has been

made in fabrication and processing facilities allowing us to supply material closer to

final form, providing the option of bespoke sizes and finishes previously unavailable,

creating a real opportunity for a ‘one stop shop’.

Blackburns remains responsive to the constant fluctuations in demand faced by

industry, and with the ability to supply to most parts of the UK within 24 hours, we

are committed to building long term cost saving relationships with our customers.


PRODUCT CATALOGUE

ALUMINIUM

• Sheet• Patterned Sheet• Plate• Coils & Blanks• Circles• Shate• Special Extrusions• Angles• Tee & Zed Sections• Channels• Flat Bar• Round Bar• Square Bar• Welding Wire• Round Tube• Rectangular Tube• Gutters & Cope• Fluted Edges & Nosings• Wallboard Sections

STAINLESS STEEL

• Sheet• Treadplate• Plate• Coil• Section• Pipe• Circle Polished• Flanges• Seamless Tube• Hygienic Tube & Fittings• High Purity Tube & Fittings• Screwed Fittings• Socket Weld Fittings• Structural & Decorative Tube

BRASS

• Rod• Hexagon• Angle• Square• Tube• Plate• Flat Bar• Sheet

BRONZE

• Drawn Rod• Rod• Hexagon• Hollow Bar• Plate• Sheet

COPPER

• Tube• Flat Bar• Sheet• Plate• Round Bar

COIL PROCESSING

• Aluminium Slit Coil• Stainless Steel Slit Coil• Aluminium Precision Blanks• Stainless Steel Precision Blanks

PLATE

• Aluminium Plate 5083• Aluminium Plate 6082• Alumec 79-89-99• MIC-6

ARCHITECTURAL PRODUCTS/ SURFACE DESIGN

• Composite Panels• Glazing System• Lorin• Aluart• Decorbrite• Anodised Sheet• Patterned Sheet

FABRICATION PROCESSING

• Plastic Coating• Guillotining• Bench Tooling• Bending• Slitting• Shearing• Sawing• Tapping & Drilling• Blanking• Mitring• Punching• Pressing

SIGNS & SIGN COMPONENTS

• Alochromed & Painted Sheet• Aluminium Circles• Aluminium Triangles• Aluminium Rails• Aluminium Tee Sections• Aluminium Round Posts• Aluminium Square Posts• Steel Round Posts• Steel Square Posts• Plastisol Coated Sheet• Planking Systems• Trays• Clip Sections• Composite Panels• Stainless Steel Banding Systems• Nationwide Supply Solutions...

©2008 BLACKBURNS METALS LTD

All rights are reserved and no part of this publicationmay be reproduced, stored or transmitted in anyform or by any means without the prior permission ofBlackburns Metals Limited.

DISCLAIMER

The information contained herein is for guidance only.No liability will be accepted by the Company.

Blackburns Products & Services

BEDFORDEdison Road

Elms Farm Industrial EstateBedford MK41 0HUt. 01234 684100

[email protected]

BRIDGENDCoegnant Close

Brackla Industrial EstateBridgend

Mid Glamorgan CF31 2AHt. 01656 683900

[email protected]

BRISTOLSt.Andrews Trading Estate

Third Way, AvonmouthBristol BS11 9YE

t. 0117 948 [email protected]

EDENBRIDGEFircroft WayEdenbridge

Kent TN8 6ESt. 01732 582700

[email protected]

HAYDOCKUnits 3 & 4

Haydock Lane Industrial EstateHaydock Lane, HaydockSt. Helens WA11 9UVt. 01942 758800

[email protected]

KINGSWINFORD31 The Pensnett Estate

KingswinfordWest Midlands DY6 7UE

t. 01384 [email protected]

LEEDSUnits 3 & 4Benyon Park

Leeds LS12 6DPt. 0113 386 3280

[email protected]

LITTLEHAMPTONUnit 9, Thorgate Road

Lineside Industrial EstateLittlehampton

West Sussex BN17 7LUt. 01903 733500

[email protected]

NORWICH13 Concorde Road

NorwichNorfolk NR6 6BJ


PLYMOUTHUnit K1, Eagle Road

Langage Business ParkPlymouth, Devon PL7 5JY


READING9-10 Stadium Way

ReadingBerkshireRG30 6BX

t. 0118 945 [email protected]

PLATE CENTREBirmingham New Road

TiptonWest Midlands DY4 9AG


Contact your local Blackburns or visit us online: www.blackburnsmetals.com

COIL CENTREBirmingham New Road

TiptonWest Midlands DY4 9AG


Date post:	13-Nov-2014
Category:	Documents
Upload:	mikedigitalegg
View:	39 times
Download:	2 times

PRODUCT CATALOGUE

Documents