PRODUCT CATALOGUE - BekamentBEKAMENT PODUCT CATALOGUE 3About the Company Not far from the city of...

PRODUCT CATALOGUE

3BEKAMEnT PRODUCT CATALOGUE

About the CompanyNot far from the city of Arandjelovac, on the slopes of Venčac mountain Banja Komerc Bekament Ltd. is located - a factory for the production of materials for finishing works in construction industry. It was founded in 1992 and for over 20 years now it has successfully processed and produced grinding materials made of the famous "Venčac marble".

Our program consists of: coating for interior and exterior wall surfaces, construction adhesives, masses for smoothing and grouting, lime and machine mortar, decorative mineral thin layer mortar (powder), thin-film decorative plasters in paste form, emulsions and primers, floor materials, finest calcium carbonate fillers and other materials in the construction industry.

All the products have the appropriate certificates of quality. All of our products are sold in the market under the brand name of BEKAMENT.

In the early nineties under the name of Banja Komerc, a small family business was founded for the purpose of processing grinding material made from the famous Venčac stone. No one could have guessed that twenty years later, with a lot of enthusiasm, work, love and courage it would grow into a large company it is today. Therefore, not so long ago, in 1992, the production there began with only two products, and the range of products has expanded up to now into more than 70 products.

Today Banja Komerc company, which was recently renamed into Banja Komerc Bekament Ltd., also owns the daughter company Gea with two quarries and processing plants for calcium carbonate. In addition, there are two Bekament quarries for the production of calcium carbonate. Therefore, this company today can make round process from the basic raw material production to the final product.

Quality PolicyIn an effort to gain new customers and retain the existing ones, Banja Komerc Bekament Ltd. bases its business policy on the promotion and continuous improvement of the business quality and protection of the environment in which we and our clients live and work. For this reason we have decided to introduce our business principles and rules underlying the ISO 9001- Quality Management System (QMS) and ISO 14001- Environmental Protection Management System (EMS).

Banja Komerc Bekament Ltd. builds its business success and growth and improves the satisfaction and motivation of the users and all employees through meeting its strategic objectives, which are:

• Maximumqualityproducts,• Constantincreaseofcustomersatisfactionbymeetingtheirdemandsandexpectations,• Consistentproductioncontrolandprocessmanagementwhichbothensurecompletefulfilmentofcustomersrequirementsandall the relevant regulations as well as eliminate security risks, • Continuousinvestinginthedevelopmentandimprovementoftechnicalequipment,• Managementofalltheidentifiedaspectsoftheenvironment,• Commitmenttocontinuousimprovementandpollutionprevention,• Compliancewiththeapplicableregulationsandotheracceptedrequirementsrelatedtotheenvironmentalprotection,• Professionaltrainingofemployeesandincreasingtheircreativityandinitiative,• Constantincreaseoftheeffectivenessandefficiencyofworkprocessesandincreaseoftheoverallbusinessprofitability,• Reductionofthebusinesscostswiththeeffortofallemployeestodotheirdutieswellandontime;firstandeachothertime,• Creation,maintenanceandimprovementoffairpartnershipswiththesuppliersandcustomers.

4 5BEKAMEnT PRODUCT CATALOGUE BEKAMEnT PRODUCT CATALOGUE

1

1

1

1

1

1

1

1

2

2

4

3

5

5

5

5

6

6

6

6 7

7

7

7

7

7

7

7

7

7

8

8

8

88

9

9

9

9

10

10

10

10

1010

11

11

11

11

11

1111

1111

12

12

12

12

1 • BASESANDIMPREGNATIONS...........................................................2 • INTERNALCOLORS .........................................................................3 •INTERNALMORTARS .....................................................................4 • DECORATIVEMATERIALS ..............................................................5 • FACADECOLORS .............................................................................6 • FACADEPLASTERS ........................................................................7 • CONSTRUCTIONADhESIVES ..........................................................8 • SYSTEMFORASSEMBLINGCERAMICS .......................................9 • FLATTENINGMORTARS .................................................................10 • MEChANICALMORTARS .............................................................11 • hYDROINSULATIONMATERIALS ...............................................12 • INSULATION SYSTEMS .................................................................

(pg 7-9)(pg 10-11)(pg 12-13)(pg 14-17)(pg 18-20)(pg 21-24)(pg 25-27)(pg 28-29)(pg 30-32)(pg 33-34)(pg 35-36)(pg 37-41)


BASES AND IMPREGNATIONS www.bekament.com

WALL SURFACE GROUNDING BASE

STRUCTURAL BASE FOR ACRYLIC MORTARS AND PAINTS

UNIVERSAL STRUCTURAL BASE FOR ALL TYPES OF MORTARS AND PAINTS

Application: Concentrated emulsion intended for greater adhesiveness, equalizing and fixing mineral and other bases prior to interior paint application, as well as for coating highly absorbent bases.Preparation and application: If it is used as a primer prior to application of interior dispersion paints and in preparation of surfaces for skimming, the ratio BK-Podloga:water is 1:9, whereas for application prior to tile laying to old, fragile and unevenly absorbent bases, the ratio BK-Podloga:water is 1:4. The primer is usually applied with long-haired roller or by spraying in one layer (in case of very dry, absorbent bases, it is possible to ground twice within 2-3 hours. Drying time prior to application should be minimum 12 hours. Consumption: approx. 30-50 m2 (1 l of primer), depending on the absorption and purposeShelf life: 18 months in the original packaging. Store at temperatures between +5°C and +25°C, protected from sunlight and freezing.Packaging: 1, 3 and 5 l.

Application: Acrylic structural coat intended for equalization, neutralization, fixing and waterproofness of the base prior to the application of acrylic facade paints and decorative mortars. It is recommended that the shade of BK-Acryl base is the same as the finish coat. Preparation and application: The base to which BK-Acryl is applied must be solid, clean, dry, and without oil remains. Prior to application, BK-Acryl base is to be mixed and diluted with 15-20 % of water. The diluted base is applied to the wall with long-haired roller or brush in one layer. Drying time prior to the finish coat application is 24 hours. Application temperature: +5°C to +30°C. Do not work under direct sun, rain and strong wind.Consumption: approx. 0.2-0.25 kg/m2, depending on absorbing properties and surface roughness. Shelf life: 18 months in the original packaging. Store at temperatures between +5°C and +25°C, protected from sunlight and freezing.Packaging: 8 and 25 kg.

Application: Universal structural coat intended for equalization, neutralization, fixing and waterproofness of the base prior to the application of all types of facade paints and decorative mortars, except silicate paints/mortars. It is recommended that the shade of BK-Grund Universal base is the same as the finish coat.Preparation and application: The base to which BK-Grund Universal is applied must be solid, clean, dry, and without oil remains. Prior to application, BK-Grund Universal base is to be mixed and diluted with 15-20 % of water. The diluted base is applied to the wall with long-haired roller or brush in one layer. If necessary, in case of old, highly-absorbent surfaces, two groundings are possible within 2-3 hour timeframe. Drying time prior to the finish coat application is 24 hours. Application temperature: +5°C to +30°C. Do not work under direct sun, rain and strong wind.Consumption: approx. 0.2-0.25 kg/m2, depending on absorbing properties surface roughness. Shelf life: 18 months in the original packaging. Store at temperatures between +5°C and +25°C, protected from sunlight and freezing.Packaging: 8 and 25 kg.

BK-Podloga

BK-Acryl

BK-Grund Universal

CONTENT

BK-Podloga ........................................................................07BK-Acryl .............................................................................07BK-Grund Universal ..........................................................07BK-MicroGrund Universal .................................................08BK-Grund Silicat .................................................................08BK-Beton Kontakt ..............................................................09BK-Nivelator .......................................................................09BK-Penetrat........................................................................09

BK-Deco Acryl ....................................................................14BK-Stucco ..........................................................................14BK-Nova Era ......................................................................14BK-Nova Era Exclusive .....................................................15BK-Sunset ..........................................................................15BK-Iskra .............................................................................16BK-Natura ...........................................................................16BK-Perla ..............................................................................16BK-Travertino .....................................................................17

BK-StirolFix WDVS ............................................................25BK-StirolFix 1 .....................................................................25BK-StirolFix Special ...........................................................25BK-StirolFix White .............................................................26BK-ParketFix .....................................................................26BK-ParketFix Prime ..........................................................26BK-ParketFix PU ................................................................27BK-PlasterFix .....................................................................27BK-Fil ...................................................................................27

BK-Pol ................................................................................10BK-Pol Fresh .....................................................................10BK-Pol Gold ........................................................................10BK-Pol Crystal ...................................................................10BK-Sani CID ........................................................................11BK-Poli CID .........................................................................11BK-Color .............................................................................11

SiproFix BK 90 ....................................................................28SiproFix BK 110 ..................................................................28SiproFix BK 160 ..................................................................29BK-Fugomal .......................................................................29

BK-IN Plast ........................................................................12BK-Briv Universal ..............................................................12BK-Dekor ............................................................................13BK-IN Kul ............................................................................13BK-IN Kul Briliant ..............................................................13

BK-Fas Acryl ......................................................................18BK-MicroFas Acryl ............................................................18BK-Fas Silicat ....................................................................18BK-MicroFas Silicat ...........................................................19BK-Fas Silicon ....................................................................19BK-MicroFas Silicon ..........................................................19BK-Bet ................................................................................20BK-Fas Color ......................................................................20

BK-Plast .............................................................................21BK-S Plast ..........................................................................21BK-Sil ..................................................................................22BK-Sil Si&Si ........................................................................22BK-Kul ................................................................................23BK-Briv Special ..................................................................23BK-Terofa ...........................................................................24BK-Banjalit .........................................................................24

BASES AND IMPREGNATIONS CONSTRUCTION ADhESIVES

INTERNAL COLORS SYSTEM FOR ASSEMBLING CERAMICS

DECORATIVE MATERIALS

BK-GletEx Universal ...........................................................30BK-GletEx ............................................................................30BK-GletEx Premium ..........................................................30BK-GletEx S .........................................................................31BK-GletEx Acryl .................................................................31BK-GletEx S Acryl ...............................................................31BK-Liv .................................................................................32

FLATTENING MASS

INTERNAL MORTARS

BK-Mal 120 ........................................................................33BK-Mal 220 ........................................................................33BK-Mal 320 ........................................................................33BK-Mal 420 ........................................................................34

MEChANICAL MORTARS

FACADE COLORS

BK-hidroStop1 .................................................................35BK-hidroStop2 .................................................................35BK-hidroStopExtra ..........................................................35BK-Fleks .............................................................................36BK-hidroStop5/5 .............................................................36

hYDRO INSULATION MATERIALS

FACADE PLASTERS

BEKAThERMPrestige .......................................................39BEKAThERMStandard .....................................................40BEKAThERMPlus .............................................................41

INSULATION SYSTEMS

MIX SYSTEM


BASES AND IMPREGNATIONS www.bekament.comBASES AND IMPREGNATIONSwww.bekament.com

BK-Grund Silicat

BK-Beton Kontakt

BK-Nivelator

BK-Penetrat

STRUCTURAL BASE OF SILICATE MORTARS AND PAINTS

STRUCTURAL BASE FOR SMOOTh SURFACES

BASE FOR UNEVENLY ABSORBENT SURFACES

hIGhLY-PENETRATING COAT FOR MINERAL BASES

Application: Structural silicate base for coating lime, lime-cement and cement surfaces to equalize, neutralize and fix the base prior to application of silicate paints and silicate decorative mortars. It is recommended that the shade of BK-Grund Silicat base is the same as the finish coat. It can be used both for exterior and interior surfaces.Preparation and application: The base to which BK-Grund Silicat is applied must be solid, clean, dry and without oil remains. Prior to application, BK-Grund Silicat base is to be mixed and diluted with approx. 15 % of water. It is applied to the wall with long-haired roller or brush in one layer. Drying time before the application of the finish layer is 12 hours.Application temperature: +15°C to +30°C, relative humidity should not exceed 70%.Consumption: approx. 0.2-0.25 kg/m2, depending on its absorbing properties and surface roughness.Shelf life: 12 months in the original packaging. Store at temperatures between +5°C and +25°C, protected from sunlight and freezing.Packaging: 8 and 25 kg.

Application: Structural base intended for increasing and equalizing adhesiveness of poorly absorbent, smooth, high-density bases prior to rendering with cement-lime and plaster-lime mortars. BK-Beton Kontakt is particularly recommended for smooth types of concrete and for prefabricated concrete surfaces. It is also used as a base in the tile to tile bonding system.Preparation and application: The base to which BK-Beton Kontakt is applied must be solid, dry and free of dust. BK-Beton Kontakt should be well homogenized prior to use. The undiluted base is to be applied to wall with long-haired roller or brush in one layer. Mechanical application with appropriate equipment is also possible. Drying time prior to mortar application is min. 4 hours. Application temperature: +5°C to +30°C. Do not work under direct sun, rain and strong wind.Consumption: approx. 0.5 kg/m2.Shelf life: 18 months in the original packaging. Store at temperatures between +5°C and +25°C, protected from sunlight and freezing.Packaging: 6 and 20 kg.

Application: Deeply penetrating coat intended for equalization and neutralization of unevenly absorbent surfaces, such as gas concrete, brick, porous stone etc. It is used as a base in case of highly absorbent surfaces prior to rendering with cement-lime and plaster-lime mortars to prevent mortar uneven drying and cracking and prior to skimming with skim compounds.Preparation and application: The base to which the coat is applied must be solid, dry and free of dust. BK-Nivelator is diluted with water in the ratio 1:6 to 1:10 (coat:water), depending on the absorbing properties of the base. In case of more absorbent bases, the dilution ratio should be lower. The coat is applied with roller, brush or sprayer. In case of highly-absorbent surfaces, double, wet to wet, application can be done. Application temperature: +5°C to +30°C. Do not work under direct sun, rain and strong wind.Consumption: approx. 30-60 g/m2, depending on base absorbing properties.Shelf life: 18 months in the original packaging. Store at temperatures between +5°C and +25°C, protected from sunlight and freezing.Packaging: 10 and 20 kg.

Application: Deeply penetrating, steam-permeable coat intended for impregnation, equalization and fixing all types of mineral exterior and interior bases. It is particularly convenient for poorly absorbent surfaces prior to the application of the finish facade coat, which additionally improves its adhesiveness. Due to nano-particles, its penetration is extremely good and therefore convenient for reconstruction and rehabilitation of national heritage sites and old buildings of historical importance when it is necessary to additionally bind and reinforce worn and damaged surface mortars. Preparation and application: The base to which BK-Penetrat is applied must be clean, dry, free of remains of oil and old coats. It is also necessary to remove poorly bound parts to an extent possible. Prior to use, BK-Penetrat is to be diluted with water in the ratio 1:4 and mixed well. In order to achieve good penetration, it is necessary to comply with dilution instructions. It is applied with long-haired brush, long-haired roller or by spraying. In case of very old, absorbent surfaces, double, wet to wet, grounding should be done. Minimum drying time is 24 hours.Application temperature: +5°C to +30°C. Do not work under direct sun, rain and strong wind.Consumption: 50-80 ml/m2, depending on its absorbing properties and surface roughness.Shelf life: 12 months in the original packaging. Store at temperatures between +5°C and +25°C, protected from sunlight and freezing.Packaging: 1 and 5 l.

UNIVERSAL STRUCTURAL BASE WITh MICROFIBERS

Application: Universal structural coat with microfibers intended for equalization, neutralization, fixing and waterproofness of the base prior to the application of all types of facade paints and decorative mortars, except silicate paints/mortars. It is convenient for filling fine cracks and additional base reinforcing. It is usually used in combination with BK-MicroFas Acryl and BKMicroFas Silicon.Preparation and application: The base to which BK-MicroGrund Universal is applied must be solid, clean, dry, and without oil remains. Prior to application, BK-MicroGrund Universal base is to be mixed and diluted with 10-15 % of water. The diluted base is applied to wall with long-haired roller in two cross layers. Drying time between the layers is min. 4 hours. It should be worked evenly, with the ”full roller” in order to avoid concentration of the filler on one spot. Drying time before the application of the finish layer is 24 hours. Application temperature: +5°C to +30°C. Do not work under direct sun, rain and strong wind.Consumption: approx. 0.2-0.3 kg/m2, depending on absorbing properties and surface roughness. Shelf life: 18 months in the original packaging. Store at temperatures between +5°C and +25°C, protected from sunlight and freezing.Packaging: 8 and 25 kg.

BK-MicroGrund Universal


INTERNAL COLORSwww.bekament.com INTERNAL COLORS www.bekament.com

Application: Liquid biocide substance for protection and post-treatment of wall surfaces covered with facade materials, dispersion paints, stone, brick, concrete, with the exception of wood, from harmful microorganism action.Preparation and application: Prepare a solvent to work with. It is done as follows: shake well the bottle with the biocide substance, dilute BK-Sani Cid with water in the ratio 1:5 (one part of BK-Sani Cid to 5 parts of water). Surfaces are coated with the solvent until it foams. Dry coat surface poses no hazard to persons. Drying time, depending on conditions, is 2-4 hours. After 24 hours, rinse the coated facade surface with water or wipe the interior surfaces with wet cloth. If necessary, the substance can be applied several times by repeating the same procedure after 24 hours. It is applied with brush, roller or sponge until the surface is completely wet and the substance foams.Consumption: 450 ml of the prepared substance in the 1:5 ratio (prepared as per instructions) per m2 of surface. One bottle is sufficient for approx. 7m2.Shelf life: 12 months in the original packaging. Store at temperatures between +5°C and +25°C, protected from sunlight and freezing.Packaging: 500 ml.

Application: Liquid fungicide as an addition to interior dispersion paints, protecting the applied paint film from microorganism activity, preserving the desired properties of the paint coat. Preparation and application: Shake well the bottle prior to use and mix BK-Poli Cid well with the dispersion paint. Apply the coat to the surfaces. Dry coat surface poses no hazard to persons. Drying time, depending on conditions, is 4-6 hours. The affected surfaces are first to be disinfected with BK-Sani Cid. The product can be used at new paint application. It is applied with paint roller and/or brush. Note: For the final paint dilution, take into account the quantity of BK-Poli Cid added to the paint. Consumption: 60 ml of BK-Poli Cid to 1 kg of interior dispersion paint (BK-Pol, BK-Pol Gold and BK-Pol Crystal).Shelf life: 12 months in the original packaging. Store at temperatures between +5°C and +25°C, protected from sunlight and freezing.Packaging: 500 ml.

Application: Liquid, highly-concentrated pigment used to shade interior dispersion BK-Pol, BK-Pol Gold and BK-Pol Crystal paints.Preparation and application: Prior to application shake the bottle and pour the content into the container with paint. Mix the mixture carefully until it is even.Consumption: The consumption depends on the desired shade.Shelf life: 18 months in the original packaging. Store at temperatures between +5°C and +25°C, protected from sunlight and freezing.Packaging: 100 ml.

WALL ALGAE AND MOULD REMOVAL SUBSTANCE

SUBSTANCE FOR PREVENTION OF WALL MOULD

PIGMENT PASTE FOR INTERIOR DISPERSION PAINT ShADES

BK-Sani CID

BK-Poli CID

BK-Color

Application: Dispersion, high-quality polymer emulsion based paint intended for interior use. It has excellent covering properties and steam permeability and is dry-wiping resistant. There is a possibility of over 500 shades.Preparation and application: The surface to which the paint is applied must be solid, clean, dry, and BK-Podloga impregnated. The paint is prepared by adding 15-20% of water and mixed well until fully homogenized. It is usually applied with short-haired roller in two layers. The second layer is applied after the first layer is completely dry.Consumption: approx. 0.2-0.3 kg/m2 for a two-layer coat.Shelf life: 18 months in the original packaging. Store at temperatures between +5°C and +25°C, protected from sunlight and freezing.Packaging: 1.5, 5, 8, 15 and 25 kg.

Application: Dispersion, high-quality polymer emulsion based paint with lemon aroma intended for interior use. It has excellent covering properties and steam permeability and is dry-wiping resistant. There is a possibility of over 500 shades.Preparation and application: The surface to which the paint is applied must be solid, clean, dry and BK-Podloga impregnated. The paint is prepared by adding 15-20% of water and mixed well until fully homogenized. It is usually applied with short-haired roller in two layers. The second layer is applied after the first layer is completely dry.Consumption: approx. 0.2-0.3 kg/m2 for a two layer coat.Shelf life: 18 months in the original packaging. Store at temperatures between +5°C and +25°C, protected from sunlight and freezing.Packaging: 1.5, 5, 8, 15 and 25 kg.

Application: Interior, high-quality acrylic emulsion based paint, convenient for residential and business rooms. It is wet-wiping resistant, has excellent covering properties, good steam permeability and is exceptionally white. There is a possibility of over 500 shades.Preparation and application: The surface to which the paint is applied must be solid, clean, dry and BK-Podloga impregnated. The paint is prepared by adding 5-10% of water and mixed well until fully homogenized. It is usually applied with short-haired roller in two layers. The second layer is applied after the first layer is completely dry. Consumption: approx. 120-130 ml/m2 for a two-layer coat.Shelf life: 18 months in the original packaging. Store at temperatures between +5°C and +25°C, protected from sunlight and freezing.Packaging: 1, 3, 5, 10, and 15 l.

Application: Water-wiping, interior, high-quality acrylic emulsion based paint, convenient for residential and business rooms exposed to dirt. It has excellent covering properties, good steam permeability and is exceptionally white. There is a possibility of over 500 shades.Preparation and application: The surface to which the paint is applied must be solid, clean, dry, and BK-Podloga impregnated. The paint is prepared by adding 5-10% of water and mixed well until fully homogenized. It is usually applied with short-haired roller in two layers. The second layer is applied after the first layer is completely dry. Consumption: approx. 110-120 ml/m2 for a two-layer coat.Shelf life: 18 months in the original packaging. Store at temperatures between +5°C and +25°C, protected from sunlight and freezing.Packaging: 1, 3, 5, 10, and 15 l.

DISPERSION PAINT FOR INTERIOR WALLS

SCENTED DISPERSION PAINT FOR INTERIOR WALLS

ACRYLIC PAINT FOR INTERIOR WALLS

ACRYLIC WATER-WIPING PAINT FOR INTERIOR WALLS

BK-Pol

BK-Pol Fresh

BK-Pol Gold

BK-Pol Crystal


PRODUCT GRANULATIONGrain size

REIBstructure

aprox. consumption

FULL structure

aprox. consumption

Specially delicate grains 1,0 mm / 2,5 kg/m2

Delicategrains 1,5 mm 2,5 kg/m2 3,0 kg/m2

Semi-delicategrains 2,0 mm 3,0 kg/m2 3,5 kg/m2

INTERNAL MORTARS www.bekament.comINTERNAL MORTARSwww.bekament.com

Application: Mineral powdery compound intended for protection and decoration of interior wall surfaces. It can also be used as the first layer when skimming rougher interior mortars due to a possibility of a thicker one-layer application.Preparation and application: The base to which the paint is applied must be solid, clean, dry and, if necessary, in case of poor-quality and absorbent surfaces, BK-Podloga impregnated. The compound is prepared by adding approx. 38-40 % of water and mixing it intensely until fully homogenized. The content is left to rest for 10 minutes and then well mixed again. It is applied with metal trowel and finally treated with sponge, rubber or plastic roller, depending on the desired structure. Consumption: approx. 2-3 kg/m2, depending on the desired structure and base quality. Shelf life: 12 months in the original packaging in a dry room on pallets. Packaging: 25kg.

Application: Noble, mineral, thin-layer lime-cement based mortar intended for all finely levelled lime-cement and cement mortar bases, for interior use.Mortar structure: rilled (reib) and full (kratz).Preparation and application: The base to which the mortar is applied must be solid, clean and dry. Depending on the absorbing properties and qualities of the base, it can be grounded with BK-Grund Universal one day earlier. The compound is prepared by adding approx. 25-28% of water against intense mixing to obtain the desired homogenity. The mixture is left to rest for approx. 10 min. and then mixed again. The compound is applied with metal trowel in the biggest grain thickness. Depending on the desired structure, the mortar is treated with plastic trowel in the following way: full(kratz)structure-tobestructuredincircularmovementsimmediatelyafterapplication;rilled(reib) structure - after application it is structured in circular movements until the desired structure is obtained. Application temperature: +5°C to +30°C.Consumption:INThETABLE.Shelf life: 12 months in the original packaging in a dry room on pallets.Packaging: 25 kg.

Application: high-quality acrylic decorative mortar paste of great hardness, waterproofness,exceptional workability for interior use. Mortar structure: rilled (reib) and full (kratz).Preparation and application: The base to which the mortar is applied must be solid, clean, dry, and coated with BK-Acryl. Prior to application, BK-Plast is to be mixed and, if necessary, diluted with a small quantity of water (1-2 %). The mortar is applied with steel trowel in the biggest grain thickness. Depending on the desired structure, the mortar is treated with plastic trowel in the following way: full(kratz)structure-tobestructuredincircularmovementsimmediatelyafterapplication;rilled(reib) structure - after application it is structured in circular movements until the desired structure is obtained. It is necessary to work evenly and without interruptions on continuous wall surfaces. Note: The compound needed for a continuous facade surface should be made even by mixing the content of several containers. Application temperature: +5°C to +30°C. high humidity and low temperatures can significantlyprolong mortar binding time. Consumption:INThETABLE.Shelf life: 18 months in the original packaging. Store at temperatures between +5°C and +25°C, protected from sunlight and freezing. Packaging: 25kg.

SPANISh-STYLE WALL COMPOUND

NOBLE MINERAL MORTAR

DECORATIVE ACRYLIC MORTAR FOR INTERIOR WALLS

BK-Dekor

BK-Briv Universal

BK-IN Plast


REIBstructure

aprox. consumption

FULL structure

aprox. consumption




BK-IN KulMOSAIC MORTAR FOR INTERIOR USE

Application: Decorative mosaic mortar of multi-coloured grain for treatment of interior wall surfaces, hallways, pillars and details to be pointed out. The mortar can be applied to fine cement mortars, flat concrete surfaces, fibre-cement and plasterboard tiles etc. The product is not convenient for application on fresh plaster mortars and wet surfaces. It is extremely hard and waterproof. Granulation (grain size): 1.0 mm. Preparation and application: The base to which the mortar is applied must be solid, clean, dry, and coated with BK-Acryl primer, and in case of darker bases, with BK-Micro Grund Universal. Prior to application, BK-In Kul should be mixed to make it foam and, if necessary, diluted with a small quantity of water (up to 1 %). The compound is mixed by pouring it from container into container, manually or with a low-speed mixer. The mortar is applied with steel trowel, in bottom-up strokes, in the thickness exceeding grain size by 50 %. The applied layer should be well levelled to eliminate visible voids between marble grains. It is necessary to work evenly and without interruptions on continuous wall surfaces. Application temperature: +5°C to +30°C. high humidity and low temperatures can significantlyprolong mortar binding time.Consumption: approx. 3 kg/m2.Shelf life: 18 months in the original packaging. Store at temperatures between +5°C and +25°C, protected from sunlight and freezing.Packaging: 25kg.

BK-IN Kul BriliantDECORATIVE MOSAIC MORTAR WITh ShINY PARTICLES

Application: Decorative mosaic mortar of multi-coloured grain with shiny particles for treatment of interior wall surfaces, hallways, pillars and details to be pointed out. The mortar can be applied to fine cement mortars, flat concrete surfaces, fibre-cement and plasterboard tiles etc. The product is not convenient for application on fresh plaster mortars and wet surfaces. It is extremely hard and waterproof. Granulation (grain size): 1.0 mm.Preparation and application: The base to which the mortar is applied must be solid, clean, dry, and coated with BK-Acryl primer, and in case of darker bases, with BK-Micro Grund Universal. Prior to application, BK-In Kul Briliant should be mixed to make it foam and, if necessary diluted with a small quantity of water (up to 1 %). The compound is mixed by pouring it from container into container, manually or with a low-speed mixer. The mortar is applied with steel trowel, in bottom-up strokes, in the thickness exceeding grain size by 50 %. The applied layer should be well levelled to eliminate visible voids between marble grains. It is necessary to work evenly and without interruptions on continuous wall surfaces. Application temperature: +5°C to +30°C. high humidity and low temperatures can significantlyprolong mortar binding time.Consumption: approx. 3 kg/m2.Shelf life: 18 months in the original packaging. Store at temperatures between +5°C and +25°C, protected from sunlight and freezing.Packaging: 25kg.


DECORATIVE MATERIALS www.bekament.comDECORATIVE MATERIALSwww.bekament.com

BK-Deco Acryl

BK-Stucco

BK-NovaEra

DECORATIVE MATERIAL BASE

INTERIOR DECORATIVE PUTTY

DECORATIVE INTERIOR PAINT

Application: Acrylic base intended for equalization, neutralization and improvement of adhesiveness of interior decorative materials. Its fine particles create a slight rough surface to which decorative materials are easily applied. Preparation and application: Surfaces to which this base is applied must be solid, clean and dry, free from remains of grease and oils. The appropriate bases to which BK-Deco Acryl is applied are all surfaces levelled with BK-GletEx Universal or BK-GletEx Acryl. BK-Deco Acryl base is to be mixed prior to use and diluted with approx. 10 % of water. The base is applied with brush in one layer. Drying time is min. 6 hours. Consumption: approx. 130-150 ml/m2, depending on its absorbing features and surface roughness. Shelf life: 18 months in the original packaging. Store at temperatures between +5°C and +25°C, protected from sunlight and freezing.Packaging: 1 l.

Application: high-qualitydecorativeputtyintendedfordecorationofinteriorsurfaces.Theputtyispartially transparent, which enables various effects by the application of appropriate techniques: multi-colour effect, stone, marble wall, wood imitation. Appropriate bases are all surfaces levelled with BK-GletEx Universal and BK-GletEx Acryl. BK-Stucco is wet-wiping resistant if it is waxed.Colour: White + shades according to BK-Stucco colour chart. Shades can be mixed in arbitrary ratios.Preparation and application: Prior to the application of a decorative technique, skimmed surfaces should be coated with BK-Podloga (drying time min. 6 hours). If necessary, BK-Stucco can be diluted with up to 3% of water. It is applied with stainless metal trowel in three layers. The structure is obtained by treatment with metal trowel while the compound is pasteous, in different techniques, depending on the desired effect. The final appearance is obtained by polishing the dry material with metal trowel. In case a high shiny effect is desired, additional polishing with protective wax is necessary. When waxed, BK-Stucco is wet-wiping resistant. Optimum working temperature: +8°C to +35°C. Drying time prior to the application of the next layer is approximately 4-6 hours, depending on the layer thickness.Consumption: approx. 400-500 g/m2, depending on the application technique.Shelf life: 12 months in the original packaging. Store at temperatures between +5°C and +25°C, protected from sunlight and freezing.Packaging: 3,5 kg.

Application: Acrylic, steam permeable paint for interior wall decoration. Appropriate surfaces are all surfaces levelled with BK-GletEx Universal or BK-GletEx Acryl. BK-Nova Era is wet-wiping resistant. Colour: White + shades according to BK-NovaEra colour chart. Shades can be mixed in arbitrary ratios. Preparation and application: Prior to the application of a decorative technique, skimmed surfaces should be coated with BK-Deco Acryl (drying time min. 6 hours). It is applied with a paint brush, usually in two layers. The final appearance is obtained by flattening with plastic fan. Optimum working temperature: +8°C to +35°C. Drying time prior to the application of the next layer is 4-6 hours. The coat is completely dry after 24 hours. Consumption: approx. 200-300 ml/m2 for each layer.Shelf life: 12 months in the original packaging. Store at temperatures between +5°C and +25°C, protected from sunlight and freezing.Packaging: 2.5l.

BK-NovaEra ExclusiveDECORATIVE INTERIOR PAINT

Application: Acrylic steam permeable paint for interior wall decoration. Appropriate surfaces are all surfaces levelled with BK-GletEx Universal or BK-GletEx Acryl. BK-Nova Era Exclusive is wet-wiping resistant.Colour: Gold,silverorbronze;thesecolourscanbeappliedtothewallsalreadypaintedwithBK-PolGold or BK-Pol Crystal. Shades can be mixed in arbitrary ratios.Preparation and application: Prior to the application of a decorative technique, skimmed surfaces should be coated with BK-Deco Acryl (drying time min. 6 hours). After the base is applied, BK-Pol Gold or BK-Pol Crystal can be applied in the desired shade and when the paint is dry, BK-NovaEra Exclusive can be applied. The paint is applied with paint brush, usually in one layer. The final appearance is obtained by flattening with plastic fan. Optimum working temperature: +8°C to +35°C. Drying time prior to the application of the next layer is 4-6 hours. The coat is completely dry after 24 hours. Consumption: approx. 200-300 ml/m2 per layer.Shelf life: 12 months in the original packaging. Store at temperatures between +5°C and +25°C, protected from sunlight and freezing.Packaging: 1l.

BK-SunsetDECORATIVE INTERIOR PAINT

Application: Special acrylic paint for interior wall surface decoration. Appropriate surfaces are all surfaces levelled with BK-GletEx Universal or BK-GletEx Acryl. BK-Sunset is wet-wiping resistant.Colour: Silver + shades according to BK-Sunset colour chart.Preparation and application: Prior to the application of the decorative technique, skimmed surfaces should be coated with BK-Deco Acryl (drying time min. 6 hours). BK-Sunset paint is pre-prepared for application. It is applied with paint brush in one or two layers, depending on the desired effect, which is usually the final step as, when applied to the wall, interesting patterns are produced. If desired, finish treatment of the surface can also be done with plastic fan. The paint is applied to continuous surfaces without interruption. BK-Sunset may also be applied to surfaces painted with BK-Pol Gold or BK-Pol Crystal. Optimum working temperature: +8°C to +35°C. The coat is completely dry after 24 hours. For more details, see product datasheet.Consumption: approx. 150-200 ml/m2, depending on the application technique.Shelf life: 12 months in the original packaging. Store at temperatures between +5°C and +25°C, protected from sunlight and freezing.Packaging: 1 l.


DECORATIVE MATERIALS www.bekament.comDECORATIVE MATERIALSwww.bekament.com

BK-Iskra

BK-Natura

BK-Perla

BK-TravertinoINTERIOR DECORATIVE PAINT

INTERIOR DECORATIVE PASTEOUS MIXTURE

INTERIOR DECORATIVE PASTEOUS MIXTURE

INTERIOR DECORATIVE MORTARApplication: This is a special acrylic paint intended for interior surface decoration. Brilliant final structure is obtained from shiny crystals combined with micro pigments yielding full colour effect. Appropriate bases are all surfaces levelled with BK-GletEx Acryl or BK-GletEx Universal (plasterboard tiles, unrendered concrete, various fine mortars, fibre-cement tiles etc.). BK-Iskra is wet-wiping resistant.Colour: White + shades according to BK -Kristal colour scale chart.Preparation and application: Prior to the decorative paint application, skimmed surfaces should be coated with BK-Deco Acryl base in the final paint shade (drying time is min. 6 hours). The paint is prepared by adding B component (crystal) into A component (paint base). The mixture is slowly mixed and the undiluted paint is applied in two layers with painting brush. The application of the first layer is done without interruptions on continuous surfaces from one part of the wall to the other whereby it is necessary to make a slight diagonal to avoid visible material joints and material drying. The second layer is applied after the first is dry (approx. 6 hours later) with the same procedure, starting from the opposite side of the wall surface.Optimum working temperature: +8°C to +35°C. The coat is completely dry after 24 hours. For more detailed instructions, see product datasheet.Quantity: Approx. 150-200 ml/m2, depending on the application procedure.Shelf life: 12 months in the original packaging. Store at temperatures between +5°C and +25°C, protected from freezing and direct exposure to sunlight.Packaging: 1 l, BK-Kristali 40g

Application: The pasteous mixture is intended for interior surface decoration. The final structure is obtained with different application techniques and with the use of different tools (wood, crocodile skin, marble imitation etc.). A dry coat is decorated with Velatura semi-transparent paint. Appropriate bases are all surfaces levelled with BK-GletEx Acryl or BK-GletEx Universal (plasterboard tiles, unrendred concrete, various fine mortars, fibre-cement tiles etc.). The coat is wet-wiping resistant. Colour: White + shades according to Natura/Velatura colour scale chart.Preparation and application: Prior to the application of the decorative paint, skimmed surfaces are to be coated with BK-Deco Acryl base (drying time min. 6 h). BK-Natura is material prepared for application. The content is slowly mixed and applied with trapezoid plastic putty knife in one layer. The wall finish structure is obtained with round plastic putty knife, a ”comb” for decorative materials, texture rollers and other similar tools, depending on the desired structure. After drying, which is 24 hours, an additional effect is achieved by applying BK-Velatura paint with a painting brush. While the paint is still wet, the excess Velatura is to be removed with a sponge or plastic putty knife.Optimum working temperature: +8°C to +35°C. The coat is completely dry after 24 hours. For more detailed instructions, see product datasheet.Quantity: Natura: approx. 300-500 ml/m2, depending on the application technique. Velatura: approx. 150-200 ml/m2, depending on the application technique.Shelf life: 12 months in the original packaging. Store at temperatures between +5°C and +25°C, protected from freezing and direct exposure to sunlight.Packaging: 5 l BK-Natura, 1 l BK-Velatura

Application: The acrylic pasteous mixture is intended for interior surface decoration. It has excellent steam permeability and is resistant to microorganism development. Due to special additives, the coat has a fine structure resembling that of pearls. Appropriate bases are all surfaces levelled with BK-GletEx Acryl or BK-GletEx Universal (plasterboard tiles, unrendered concrete, various fine mortars, fibre-cement tiles etc.) The coat is wet-wiping resistant.Preparation and application: Prior to the application of the paint, skimmed surfaces have to be coated with the primer (drying time min. 6 hours). BK-Perla is material ready for application. It is to be slowly mixed. The first layer is applied with a hard plastic putty knife with one rounded side. The second and third layers are applied after the first one is completely dry and the desired effect is achieved with plastic rounded tool. Drying time between the layers is 6 - 8 hours. Depending on the application technique, different texture effects are obtained.Optimum working temperature: +8°C to +35°C. The coat is completely dry after 24 hours. For more detailed instructions see product datasheet.Consumption: approx. 250-300 ml/m2, depending on the application technique.Shelf life: 12 months in the original packaging. Store at temperatures between +5°C and +25°C, protected from freezing and direct exposure to sunlight.Packaging: 1 l.

Application: This decorative mineral pasteous mortar is intended for decoration of interior surfaces. Its properties are excellent steam permeability and microorganism development resistance. Travertino yields a traditional, rustic final structure. Appropriate bases are all surfaces levelled with BK-GletEx Acryl or BK-GletEx Universal (plasterboard tiles, unrendered concrete, various fine mortars, fibre-cement tiles etc.). The coat is wet-wiping resistant.Preparation and application: Prior to the application of the decorative paint, skimmed surfaces need to be coated with BK-Acryl primer (drying time min. 12 hours). The mixture is to be slowly mixed with a law-speed mixer. The first 1-2 mm thick layer is applied with metal putty knife. The second layer of the same thickness is applied 24 hours after the first one and it is to be immediately treated with sponge roller. The additional mortar effect is obtained with an iron trowel. Depending on the desired structure, the material can be treated with a sharp blade of metal putty knife. Optimum working temperature: +8°C to +35°C. Mortar is completely dry after 24h. Consumption: approx. 2,4-2,7 kg/m2, depending on the application technique.Shelf life: 12 months in the original packaging. Store at temperatures between +5°C and +25°C, protected from freezing and direct exposure to sunlight.Packaging: 8 and 25 kg.


FACADE COLORSwww.bekament.com FACADE COLORS www.bekament.com

ACRYLIC DISPERSION PAINT FOR EXTERNAL WALLS

ACRYLIC DISPERSION PAINT WITh MICROFIBERS

EXTERIOR WALL SILICATE DISPERSION

Application: Acrylic dispersion paint for protection and decoration of new and old facade surfaces. It is made of high-quality components and has excellent covering properties, waterproofness, as well as UV radiation and atmospheric impact resistance. Due to high resistance, it is also convenient for application on interior walls of public buildings. There is a possibility of over 500 shades.Preparation and application: The base to which the dispersion paint is applied must be solid, clean, dry and coated with BK-Acryl. The paint is prepared by adding 10-15 % of water and it is well mixed until fully homogenized. BK-Fas Acryl is usually applied with long-haired roller in two layers. The second layer is applied when the first layer is completely dry, which, under normal conditions (T=+23-35°C, relative air humidity=50-60%), takes 4-6 hours. It should be worked evenly, without interruptions on continuous surfaces. Application temperature: +5°C to +30°C. Do not work under direct sun, rain and strong wind.Consumption: approx. 0.25-0.35 kg/m2, depending on its absorbing features and surface roughness. Shelf life: 18 months in the original packaging. Store at temperatures between +5°C and +25°C, protected from sunlight and freezing. Packaging: 5, 8 and 25 kg.

Application: Acrylic dispersion paint with microfibers for protection and decoration of new and old facade surfaces. It is made of high-quality ingredients and has excellent covering properties, waterproofness, UV radiation and atmospheric impact resistance. This product covers well and fills thin cracks in mortar (max.0.5 mm) and thus prevents occurrence of subsequent cracks or visible traces on finished surfaces. Due to high resistance, it is also convenient for application on interior walls of public buildings. There is a possibility of over 500 shades.Preparation and application: The base to which the dispersion paint is applied must be solid, clean, dry, and coated with BK-MicroGrund Universal. The paint is prepared by adding max. 5-10 % of water and it is well mixed until fully homogenized. BK-MicroFas Acryl is usually applied with long-haired roller in two cross layers. The second layer is applied when the first layer is completely dry, which, under normal conditions (T=+23-35°C, relative air humidity=50-60%), takes 4-6 hours. It should be worked evenly, without interruptions on continuous surfaces, with the ”full roller” in order to avoid concentration of the filler on one spot. Application temperature: +5°C do +30°C. Do not work under direct sun, rain and strong wind.Consumption: approx. 0.4-0.45 kg/m2, depending on its absorbing properties and surface roughness. Shelf life: 18 months in the original packaging. Store at temperatures between +5°C and +25°C, protected from sunlight and freezing. Packaging: 5, 8 and 25 kg.

Application: Silicate dispersion paint for protection and decoration of exterior and interior wall surfaces with excellent steam permeability and covering properties. Due to a specific way of binding with surface, it is convenient for repair of surfaces of old buildings and national heritage sites. The dispersion is UV radiation and weather impact resistant.Preparation and application: The base to which the paint is applied must be solid, clean, dry and coated with BK-Grund Silicat base. It is prepared by adding approx. 10% of water and the compound is mixed until fully homogenized. BK-Fas Silicat is usually applied with a long-haired roller in two layers. The second layer is applied after the first layer is entirely dry, which under normal conditions (T=+23-25°C relative air humidity 50-60%) takes 4-6h. It is to be applied evenly with no interruptions oncontinuoussurfaces.highhumidityandlowtemperaturesmayprolongthetimeofbindingandaffect shade evenness. At application, protective shades are to be used. Application temperature: +15°C to +30°C, relative humidity should not exceed 70%. Do not work under direct sunlight, rain or strong wind.Consumption: approx. 0.35 kg/m2, depending on the absorbing properties of the base.Shelf life: 12 months in the original packaging. Store at temperatures between +5°C to +25°C, protected from sunlight and freezing.Packaging: 5, 8 and 25 kg.

BK-Fas Acryl

BK-MicroFas Acryl

BK-Fas Silicat

BK-MicroFas Silicat

BK-MicroFas Silicon

BK-Fas Silicon

SILICATE DISPERSION PAINT WITh MICROFIBERS

SILICONE DISPERSION PAINT WITh MICROFIBERS

SILICONE DISPERSION PAINT FOR EXTERNAL WALLS

Application: Silicate dispersion paint with microfibers for protection and decoration of exterior and interior wall surfaces. Due to its high steam permeability, it is very convenient for rehabilitation of old facades and national heritage sites. It is high-quality silicate binder and additive-based, has excellent coverage properties and UV radiation and atmospheric impact resistance. This product covers well and fills thin cracks in mortar (max. 0.5 mm) and thus prevents occurrence of subsequent cracks or visible traces on finished surfaces. There is a possibility of over 300 shades.Preparation and application: The base to which the dispersion paint is applied must be solid, clean, dry and coated with BK-Grund Silicat. The paint is prepared by adding max. 5-10 % of water and it is well mixed until fully homogenized. BK-MicroFas Silicat is usually applied with long-haired roller in two cross layers. The second layer is applied when the first layer is completely dry, which, under normal conditions (T=+23-35°C, relative air humidity=50-60%), takes 4-6 hours. It should be worked evenly, without interruptions on continuous surfaces, with the ”full roller” in order to avoid filler concentrationononespot.highhumidityand low temperatures (lateautumn, e.g.)mayextendbinding time and affect the shade evenness. At application, the use of protective covers is necessary. Application temperature: +15°C to +30°C, relative humidity below 70 %. Do not work under direct sun, rain and strong wind.Consumption: approx. 0.4-0.45 kg/m2, depending on its absorbing features and surface roughness. Shelf life: 12 months in the original packaging. Store at temperatures between +5°C and +25°C, protected from sunlight and freezing. Packaging: 5, 8 and 25 kg.

Application: Silicone dispersion paint for protection and decoration of new and old facade surfaces. high-qualitysiliconeresinbased,ithasexcellentcoveringproperties,waterproofness,goodsteampermeability, as well as UV radiation and atmospheric impact resistance. Due to high resistance, it is also convenient for application on interior walls of public buildings. This product covers well and fills thin cracks in mortar (max. 0.5 mm) and thus prevents occurrence of subsequent cracks or visible traces on finished surfaces. There is a possibility of over 300 shades.Preparation and application: The base to which the dispersion paint is applied must be solid, clean, dry and coated with BK-MicroGrund Universal. The paint is prepared by adding max. 5-10 % of water and it is well mixed until fully homogenized. BK-MicroFas Silicon is usually applied with long-haired roller in two cross layers. The second layer is applied when the first layer is completely dry, which, under normal conditions (T=+23-35°C, relative air humidity=50-60%), takes 4-6 hours. It should be worked evenly, without interruptions on continuous surfaces, with the “full roller” in order to avoid concentration of the filler on one spot. Application temperature: +5°C do +30°C. Do not work under direct sun, rain and strong wind.Consumption: approx 0.4-0.45 kg/m2, depending on its absorbing properties and surface roughness.Shelf life: 18 months in the original packaging. Store at temperatures between +5°C and +25°C, protected from sunlight and freezing. Packaging: 5, 8 and 25 kg.

Application: Silicone dispersion paint for protection and decoration of new and old facade surfaces. high-quality silicone resin based, it has excellent covering properties, waterproofness, good steampermeability, as well as UV radiation and atmospheric impact resistance. Due to high resistance, it is also convenient for application on interior walls of public buildings. There is a possibility of over 300 shades.Preparation and application: The base to which the dispersion paint is applied must be solid, clean, dry and coated with BK-Grund Universal. The paint is prepared by adding approx. 10 % of water and it is well mixed until fully homogenized. BK-Fas Silicon is usually applied with long-haired roller in two layers. The second layer is applied when the first layer is completely dry, which, under normal conditions (T=+23-35°C, relative air humidity=50-60%), takes 4-6 hours. It should be worked evenly, without interruptions on continuous surfaces. Application temperature: +5°C to +30°C. Do not work under direct sun, rain and strong wind.Consumption: approx. 0.3-0.35 kg/m2, depending on its absorbing properties and surface roughness.Shelf life: 18 months in the original packaging. Store at temperatures between +5°C and +25°C, protected from sunlight and freezing. Packaging: 5, 8 and 25 kg.



REIBstructure

aprox. consumption

FULL structure

aprox. consumption





REIBstructure

aprox. consumption

FULL structure

aprox. consumption




FACADE COLORSwww.bekament.com FACADE PLASTERS www.bekament.com

BK-Bet

BK-Fas Color

ACRYLIC CONCRETE PAINT

FACADE DISPERSION PAINT - FULL ShADE

Application: Acrylic paint of high stability, intended for the protection of concrete and facade concrete surfaces. Its properties are excellent waterproofness and adhesiveness to concrete surfaces, UV radiation and atmospheric impact resistance. It protects the surface from wear and dust and makes it look more attractive. It is produced in 14 standard shades within the colour chart. Preparation and application: The base to which the paint is applied must be solid, clean, dry and coated with BK-Grund Universal or BK-Bet and diluted with 25 % of water. The compound is prepared by adding 5 % of water and mixing it well until full homogenization is obtained. BK-Bet is usually applied with brush or roller in two layers. The second layer is applied after the first is completely dry. It is necessary to work evenly and without interruptions on continuous surfaces. Application temperature: +5°C to +30°C. Do not work under direct sun, rain and strong wind.Consumption: approx. 0.4 kg/m2, depending on its absorbing properties and surface roughness. Shelf life: 18 months in the original packaging. Store at temperatures between +5°C and +25°C, protected from sunlight and freezing. Packaging: 1 and 5 kg.

Application: Facade dispersion paint made on the basis of high-quality acrylic emulsion. It is applied for decorative protection of elements both on new, quality and old facade surfaces. It is also used as dispersion paint and facade mortar shading substance. Its properties are excellent waterproofness, UV radiation and atmospheric impact resistance. Due to high resistivity, it is also convenient for application on interior walls of public facilities. It is produced in 13 standard shades.Preparation and application: The base to which the dispersion paint is applied must be solid, clean, dry, and coated with BK-Acryl. If necessary, the paint is prepared by adding max. 5-10 % of water and it is well mixed until fully homogenized. BK-Fas Color is usually applied with long-haired roller in two layers. The second layer is applied when the first layer is completely dry, which, under normal conditions (T=+23-35°C, relative air humidity=50-60%), takes 4-6 hours. It should be worked evenly, without interruptions on continuous surfaces. Application temperature: +5°C to +30°C. Do not work under direct sun, rain and strong wind.Consumption: Consumption depends on the desired shade. If it is used as an independent paint, the consumption is approx. 0.25 kg/m2, depending on the absorbing properties and surface roughness. Shelf life: 18 months in the original packaging. Store at temperatures between +5°C and +25°C, protected from sunlight and freezing. Packaging: 1 kg.

BK-Plast

BK-S Plast

DECORATIVE ThIN-LAYER ACRYLIC-BASED MORTAR

DECORATIVE ThIN-LAYER SILICATE-BASED MORTAR

Application: high-quality acrylic decorative mortar paste of great hardness, waterproofness,exceptional workability, UV radiation and atmospheric impact resistance. There is a possibility of over 1000 shades. Mortar structure: rilled (reib) and full (kratz).Preparation and application: The base to which the mortar is applied must be solid, clean, dry and coated with BK-Acryl. Prior to application, BK-Plast is to be mixed and, if necessary, diluted with a small quantity of water (1-2 %). The mortar is applied with steel trowel in the biggest grain thickness. Depending on the desired structure, the mortar is treated with plastic trowel in the following way: full (kratz) structure - to be structured in circularmovements immediately after application; rilled(reib) structure - after application it is structured in circular movements until the desired structure is obtained. It is necessary to work evenly and without interruptions on continuous wall surfaces. Note: The compound needed for a continuous facade surface should be made even by mixing the content of several containers. Application temperature: +5°C to +30°C. Do not work under direct sun, rain and strong wind. The facade should be adequately protected with net. high humidity and low temperatures can significantlyprolong mortar binding time. Consumption:INThETABLE.Shelf life: 18 months in the original packaging. Store at temperatures between +5°C and +25°C, protected from sunlight and freezing. Packaging: 25 kg.

Application: high-qualitysilicatedecorativemortarpasteofgreathardness,exceptionalworkabilityand good steam permeability, UV radiation and atmospheric impact resistant. Due to its properties it is recommended for rehabilitation of old buildings and national heritage sites. There is a possibility of over 300 shades. Mortar structure: rilled (reib) and full (kratz).Preparation and application: The base to which the mortar is applied must be solid, clean, dry and coated with BK-Grund Silicat. Prior to application, BK-S Plast is to be mixed and, if necessary, diluted with a small quantity of water (1-2 %). The mortar is applied with steel trowel in the biggest grain thickness. Depending on the desired structure, the mortar is treated with plastic trowel in the following way:full(kratz)structure-tobestructuredincircularmovementsimmediatelyafterapplication;rilled(reib) structure - after application it is structured in circular movements until the desired structure is obtained. It is necessary to work evenly and without interruptions on continuous wall surfaces. Note: The compound needed for a continuous facade surface should be made even by mixing the content of several containers. Application temperature: +15°C to +30°C, relative humidity max. 70 %. Do not work under direct sun, rainandstrongwind.Thefacadeshouldbeadequatelyprotectedwithnet.highhumidityand lowtemperatures can significantly prolong mortar binding time. Consumption:INThETABLE.Shelf life: 12 months in the original packaging. Store at temperatures between +5°C and +25°C, protected from sunlight and freezing. Packaging: 25 kg.


FACADE PLASTERSwww.bekament.com FACADE PLASTERS www.bekament.com

BK-Sil

BK-Sil Si&Si

DECORATIVE ThIN-LAYER SILICONE RASIN-BASED MORTAR

SILICATE-SILICONE DECORATIVE MORTAR

Application: high-quality siliconedecorativemortar paste of good steampermeability, exceptionalworkability, waterproofness, UV radiation and atmospheric impact resistance. There is a possibility of over 300 shades.Mortar structure: rilled (reib) and full (kratz).Preparation and application: The base to which the mortar is applied must be solid, clean, dry and coated with BK-Grund Universal. Prior to application, BK-Sil is to be mixed and if necessary diluted with a small quantity of water (1-2 %). The compound is applied with steel trowel in the biggest grain thickness. Depending on the desired structure, the mortar is treated with plastic trowel in the following way:full(kratz)structure-tobestructuredincircularmovementsimmediatelyafterapplication;rilled(reib) structure - after application it is structured in circular movements until the desired structure is obtained. It is necessary to work evenly and without interruptions on continuous wall surfaces. Note: The compound needed for a continuous facade surface should be made even by mixing the content of several containers. Application temperature: +5°C to +30°C. Do not work under direct sun, rain and strong wind. The facade should be adequately protected with net. high humidity and low temperatures can significantlyprolong mortar binding time. Consumption: INThETABLE.Shelf life: 18 months in the original packaging. Store at temperatures between +5°C and +25°C, protected from sunlight and freezing. Packaging: 25 kg.

Application:high-qualitysilicatedecorativemortarpasteofgreathardness,exceptionalworkabilityand good steam permeability, with silicone additives to boost waterproofness. It is also UV radiation and atmospheric impact resistant. Due to its properties it is recommended for rehabilitation of old buildings and protection of national heritage sites. There is a possibility of over 300 shades. Mortar structure: rilled (reib) and full (kratz).Preparation and application: The base to which the mortar is applied must be solid, clean, dry and coated with BK-Grund Silicat. Prior to application, BK-Sil Si&Si is to be mixed and if necessary diluted with a small quantity of water (1-2 %). The mortar is applied with steel trowel in the biggest grain thickness. Depending on the desired structure, the mortar is treated with plastic trowel in the following way:full(kratz)structure-tobestructuredincircularmovementsimmediatelyafterapplication;rilled(reib) structure - after application it is structured in circular movements until the desired structure is obtained. It is necessary to work evenly and without interruptions on continuous wall surfaces. Note: The compound needed for a continuous facade surface should be made even by mixing the content of several containers. Application temperature: +15°C to +30°C, relative humidity max. 70%. Do not work under direct sun, rainandstrongwind.Thefacadeshouldbeadequatelyprotectedwithnet.highhumidityand lowtemperatures can significantly prolong mortar binding time. Consumption:INThETABLE.Shelf life: 12 months in the original packaging. Store at temperatures between +5°C and +25°C, protected from sunlight and freezing. Packaging: 25 kg.

BK-Kul

BK-Briv Special

MOSAIC MORTAR FOR EXTERNAL USE


Application: Decorative mosaic mortar of multi-coloured grain for lasting protection of facade surfaces. Its properties are exceptional hardness, waterproofness and stability when exposed to atmospheric impacts. Granulation (grain size): 1.5 mm. It is manufactured in 28 standard shades.Preparation and application: The base to which the mortar is applied must be solid, clean dry and coated with BK-Acryl primer. Prior to application, BK-Kul should be mixed to make it foam and, if necessary, diluted with a small quantity of water (up to 1 %). The compound is mixed by pouring it from container into container, manually or with a low-speed mixer. The mortar is applied with steel trowel, in bottom-up strokes, in the thickness exceeding grain size by 50 %. The applied layer should be well levelled to eliminate visible voids between marble grains. It is necessary to work evenly and without interruptions on continuous wall surfaces. When the coat is partially dry, the surface is to be flattened again.Granulation (grain size): 1.5mmApplication temperature: +5°C to +30°C.Donotworkunderdirectsun,rainandstrongwind.highhumidity and low temperatures can significantly prolong mortar binding time.Consumption: approx. 5 kg/m2.Shelf life: 18 months in the original packaging. Store at temperatures between +5°C and +25°C, protected from sunlight and freezing. Packaging: 25 kg.

Application: Noble, mineral, thin-layer lime-cement based mortar intended for all finely leveled lime-cement and cement mortar bases, for exterior use.Mortar structure: rilled (reib) and full (kratz).Preparation and application: The base to which the mortar is applied must be solid, clean and dry. Depending on the absorbing properties and qualities of the base, it is to be grounded with BK-Grund Universal one day earlier. The compound is prepared by adding approx. 25-28% of water against intense mixing to obtain the desired homogeneity. The mixture is left to rest for approx. 10 min. and then mixed again. The compound is applied with metal trowel in the biggest grain thickness. Depending on the desired structure, the mortar is treated with plastic trowel in the following way: fullstructure-tobestructuredincircularmovementsimmediatelyafterapplication;rilledstructure- after application it is structured in circular movements until the desired structure is obtained. Application temperature: +5°C to +30°C. Do not work under direct sun, rain and strong wind.Consumption:INThETABLE.Shelf life: 12 months in the original packaging in a dry room on pallets.Packaging: 25 kg.


REIBstructure

aprox. consumption

FULL structure

aprox. consumption





REIBstructure

aprox. consumption

FULL structure

aprox. consumption





REIBstructure

aprox. comnsumption

FULL structure

aprox. comnsumption





FACADE PLASTERSwww.bekament.com CONSTRUCTION ADhESIVES www.bekament.com

BK-Terofa

BK-Banjalit

MINERAL MORTAR FOR EXTERIOR WALL SPARYING


Application: Mineral, thin-layer lime-cement based mortar, intended for finely levelled lime-cement and cement mortar bases, for exterior and interior use. Preparation and application: The base to which the mortar is applied must be solid, clean and dry. Depending on the absorption properties, it is recommended to wet the base several hours prior to application. In case of highly absorbent, old, dry and/or dust-producing bases, they should be coated with BK-Grund Universal. The compound is prepared by adding approx 28 % of water against intense mixing to obtain the desired homogeneity. The mixture is left to rest for approx 10 min. and then mixed again. The compound is applied in two layers by spraying with taper-foot roller, covering the entire surface. The second layer is applied after the previous layer is partly dry. Application temperature: +5°C to +30°C. Do not work under direct sun, rain and strong wind. Consumption: approx. 3.0-4.0 kg/m2, depending on the desired structure and base quality.Shelf life: 12 months in the original packaging in a dry room on pallets.Packaging: 25 kg.

Application: Noble, mineral, thin-layer lime-cement based mortar, intended for all finely leveled lime-cement and cement mortar bases, for exterior and interior use. It has a craved structure resembling oak bark. Preparation and application: The base to which the mortar is applied must be solid, clean and dry. In case of highly absorbent, old, dry and/or dust-producing bases, they should be coated with BK-Grund Universal. The compound is prepared by adding approx. 28 % of water against intense mixing to obtain the desired homogeneity. The mixture is left to rest for approx. 10 min. and then mixed again. The compound is applied with metal trowel, and, usually, the final treatment is surface rilling with a piece of styrofoam. Application temperature: +5°C to +30°C. Do not work under direct sun, rain and strong wind. Consumption: approx. 2.7-3.3 kg/m2.Shelf life: 12 months in the original packaging in a dry room on pallets. Packaging: 25 kg.

BK-StirolFix WDVS

BK-StirolFix 1

BK-StirolFix Special

SPECIAL ADhESIVE FOR EPS BOARDS AND INSERTION OF REINFORCING MEShES

FLEXIBLE ADhESIVE FOR EPS BOARDS AND INSERTION OF REINFORCING MEShES

hIGhLY-FLEXIBLE STYROFOAM, STYRODUR AND STONE WOOL ADhESIVE

Application: For binding styroforam thermal-insulation boards to solid facade surfaces, insertion of reinforcing mesh and levelling the entire facade surface. BK-StirolFix WDVS is used as adhesive for EPS boards within Bekatherm Standard Thermal-Insulation System.Preparation and application: The base to which the adhesive is applied must be solid, clean, load-bearing, free from blooming and free from remains of oil or paint. It is prepared by mixing the powder with approx. 26-28 % of water until it is fully homogeneous. The mixture is left to rest for approx. 10 minutes, before mixing it again to obtain the adhesive of appropriate thickness. The prepared adhesive is applied to thermal-insulation plates (in dots in the middle and in stripes along the edges), and the plates are glued by pressing to the base. At reinforcing, the adhesive is applied with steel notched trowel (notch size 8-10 mm) to a dust-free styrofoam surface, and reinforcing mesh is laid top-down (min. 10 cm of mesh stripes overlapping) to the fresh adhesive. After drying, the entire surface is levelled with a new layer of the adhesive and the total thickness of the final adhesive layer is 4-5 mm. The adhesive should be protected from too fast drying and freezing. Possibility of inserting reinforcing mesh: after 48 hours at the earliest. Possibility of application of finish layers: after 7 days at the earliest. Application temperature: +5°C to +30°C. Consumption: 4-5 kg/m2, for bonding and approx. 4-5 kg/m2 for levelling.Shelf life: 12 months in the original packaging in a dry room on pallets.Packaging: 25 kg.

Application: Mineral flexible adhesive for EPS boards, insertion of reinforcing meshes and levelling of entire facade surface. BK-StirolFix 1 is used as a primer, i.e. reinforcing adhesive within Bekatherm Standard Thermal-Insulation System.Preparation and application: The base to which the adhesive is applied must be solid, clean, load- bearing, free from blooming and free from remains of oil or paint. It is prepared by mixing the powder with approx. 26-28 % of water until it is fully homogeneous. The mixture is left to rest for approx. 10 minutes, before mixing it again to obtain the adhesive of appropriate thickness. The prepared adhesive is applied to thermal-insulation plates (in dots in the middle and in stripes along the edges), and the plates are glued to the base by pressing them. At levelling, the adhesive is applied with steel notched trowel (notch size 8-10 mm) to a dust-free styrofoam surface, and reinforcing mesh is laid top-down (min. 10 cm of mesh stripes overlapping) to the fresh adhesive. After drying, the entire surface is levelled with a new layer of the adhesive and the total thickness of the final adhesive layer is 4-5 mm. The adhesive should be protected from too fast drying and freezing. Possibility of inserting reinforcing mesh: after 48 hours at the earliest. Possibility of application of finish layers: after 7 days at the earliest. Application temperature: +5°C to +30°C.Consumption: 4-5 kg/m2, for gluing and approx. 5-6 kg/m2 for levelling.Shelf life: 12 months in the original packaging in a dry room on pallets. Packaging: 25 kg.

Application: Mineral, highly-flexible adhesive intended for bonding styrofoam, styrodur and stone wool elements, as well as for the insertion of reinforcing mesh and levelling the entire facade surface. Preparation and application: The mixture is prepared by adding powder to approx. 26-28 % of water until the compound is fully homogenized. Leave it to rest for 10 minutes and mix it again prior to application. The prepared adhesive is applied to thermal-insulation tiles, on their edges and inthemiddleandtheyarebypressuregluedtoaflat,solidandcleansurface.Reinforcingmeshis inserted in a layer of BK-StirolFix Special, applied in the thickness of 3-4 mm to already glued thermal-insulation tiles. The entire surface is then levelled with a new layer of adhesive. Freshly done surfaces are to be protected from rain and intense sunshine.Consumption: approx. 4-6 kg/m2 for gluing and approx. 4-7 kg/m2 for levelling, depending on the elements to be glued.Shelf life: 12 months in the original packaging in a dry room on pallets. Package: 25 kg.


CONSTRUCTION ADhESIVES www.bekament.comCONSTRUCTION ADhESIVESwww.bekament.com

BK-ParketFix

BK-ParketFix Prime

PARQUET FLOORING ADhESIVE

SINGLE-COMPONENT POLYUREThANE COAT

Application: Synthetic polymer emulsion based adhesive intended for gluing the classic parquet and laminate to cement screeds, concrete and wooden subfloors. Its properties are exceptional adhesiveness to the surface and flexibility.Preparation and application: The base to which the adhesive is applied must be solid, clean and dry, without remains of old oil or paint. Prior to parquet laying the subfloor should be grounded with BK-ParketFix diluted with approx. 30 % of water. Cement subfloors must not contain more than 3 % of humidity, and parquet not more than 8 %. If necessary, the adhesive can be diluted with a small quantity of water of up to 1% in order to obtain the desired consistency. The adhesive is applied to the base with trowel notch in a 3-5 mm thick layer. The parquet is to be laid and well pressed. Parquet grinding is possible not sooner than 24 hours after bonding. Application temperature: +5°C to +25°C. Consumption: approx. 1-1.2 kg/m2, depending on the flooring type.Shelf life: 12 months in the original packaging. Store at temperatures between +5°C and +25°C, protected from sunlight and freezing. Packaging: 5, 8 and 25 kg.

Application: Single-component polyurethane coat, free from water and solvent for interior application. It is suitable for grounding dusty, wet bases prior to applying BK-ParketFix PU and for steam barrier (maximum base humidity 4-5 %).Preparation and application: The base to which the coat is applied must be solid, clean, dry and free from remains of oil, fats and other materials. The coating is suitable for all mineral bases, such as concrete surfaces, cement screed, anhydrite bases etc. The coating must not be diluted. It is to be applied with painting brush or short-haired roller evenly along the base in a thin layer. With bases with higher humidity content grounding is to be repeated after a 2-3 hour interval. Flooring bonding is to be made after the coat is completely dry (min. 24 hours).Application temperature: +10°C to +25°C.Consumption: approx. 0.1-0.15 kg/m2/layer, depending on the type of base.Shelf life: 12 months in the original packaging. Store at temperatures between +5°C and +25°C, protected from sunlight and freezing. Packaging: 6 kg.

BK-StirolFix WhiteWhITE ADhESIVE FOR EPS BOARDS

Application: White cement-based mineral adhesive intended for bonding styrofoam elements, insertion of reinforcing mesh and levelling the entire facade surface.Preparation and application: The base to which the adhesive is applied must be solid, clean, load-bearing, free from blooming and free from remains of oil or paint. It is prepared by mixing the powder with approx. 26-28 % of water until it is fully homogeneous. The mixture is left to rest for approx. 10 minutes, before it is mixed again to obtain the adhesive of appropriate thickness. The prepared adhesive is applied to thermal-insulation plates (in dots in the middle and in stripes along the edges), and the plates are glued to the base by pressing them slightly. At reinforcing, the adhesive is applied with steel notched trowel (notch size 8-10 mm) to a dust-free styrofoam surface, and reinforcing mesh is laid top-down (min. 10 cm of mesh stripes overlapping) to the fresh adhesive. After drying, the entire surface is levelled with a new layer of the adhesive and the total thickness of the final adhesive layer is 4-5 mm. The adhesive should be protected from too fast drying and freezing. Possibility of inserting reinforcing mesh: after 48 hours at the earliest. Possibility of application of finish layers: after 7 days at the earliest. Application temperature: +5°C to +30°C. Consumption: 4-5 kg/m2, for gluing and approx. 4-5 kg/m2 for levelling.Shelf life: 12 months in the original packaging in a dry room on pallets. Packaging: 25 kg.

BK-PlasterFix

BK-Fil

PLASTERBOARD TILE ADhESIVE

PLASTERBOARD TILE SEAM JOINT COMPOUND

Application: BK-PlasterFix is plaster-based adhesive intended for fixing plasterboard tiles to wall surfaces.Preparation and application: The base to which the adhesive is applied must be solid, clean and dry, without poorly bound parts, free from grease stains etc. In case of very smooth surfaces, it is necessary to previously coat them with BK-Nivelator. The adhesive is prepared by adding approx. 35 % of water against intense mixing until it is fully homogenized. The mixture is left to rest for approx 10 min. and then mixed again.The content is applied in dots along the edges and the middle of plasterboard tiles, with approx. 30 cm distance among them. Alternatively, the adhesive can be applied in stripes along the entire surface of the plasterboard tile. Application temperature: +5°C to +30°C. Do not work under direct sunshine, strong wind and rain. Consumption: approx. 3.5-4.0 kg/m2, depending on the base and coat thickness.Shelf life: 12 months in the original packaging in a dry room on pallets.Packaging: 25 kg.

Application: Plaster-based joint compound intended for plasterboard tile and board jointing (screws, damaged spots etc.). Preparation and application: The base to which the plaster mixture is applied must be solid, clean and dry, without poorly bound parts, free from grease, stains etc. The compound is prepared by mixing powder with approx. 50 % of water until it is fully homogenized. Jointing is made in the appropriate thickness until it is levelled with the tile surface. The width of the applied layer should be 20-25 cm and a reinforcing joint tape is placed on it and slightly impressed with trowel. After the first layer is dry, the second layer of BK-Fil, 25-30 cm wide, is applied with which the reinforced surface is levelled. After drying, possible wrinkles are removed with glass paper. Consumption: approx. 0.35-0.45 kg/m2.Shelf life: 12 months in the original packaging in a dry room on pallets. Packaging: 5 kg.

BK-ParketFix PUTWO-COMPONENT POLYUREThANE PARQUET FLOORING ADhESIVE

Application: high-quality,two-component,polyurethaneadhesiveofhighinitialandfinalhardness,free from water and solvent, for interior application. It is suitable for gluing all types of parquets, laminate floorings, board floorings, and exotic-wood parquet (with test gluing) to absorbent and non-absorbent subfloors. Due to good adhesiveness and flexibility, it is convenient for laying parquet flooring on bases with underfloor heating.Preparation and application: The subfloor to which the adhesive is applied must be solid, clean, dry and free from dust, remains of oil, grease and other materials, as well as grounded with BK-ParketFix Prime. Subfloors must not contain more than 2 % humidity (special measuring is recommended). Punch a plastic insert with component B with screwdriver or other convenient tool and let all the quantity into the bucket containing component A. Mix the components with a slow-moving mixer to obtain a homogeneous mixture. The adhesive is applied with notched putty knife, B3 type. Lay the flooring to the fresh adhesive by pressing it to the subfloor. Grind the floor linings not earlier than 24 hours after gluing. Clean the tool immediately after the work is finished. Note: Pay attention to adhesive binding time which is 60-75 minutes. Mixing components in an arbitrary ratio is not allowed.Application temperature: +10°C to +25°C. Binding and drying time of the adhesive is prolonged at lower and shortened at higher temperatures. Consumption: approx. 0.9-1.3 kg/m2, depending on the type of lining and subfloor.Shelf life: 12 months in the original packaging. Store at temperatures between +5°C and +25°C, protected from sunlight and freezing. Packaging: 10.5 kg (Component A and component B packed together).


SYSTEM FOR ASSEMBLING CERAMICSwww.bekament.com

SiproFix BK 90

SiproFix BK 110SiproFix BK 160

BK-Fugomal

STANDARD CEMENT-BASED ADhESIVE FOR NORMAL LOAD VALUES

IMPROVED CEMENT-BASED ADhESIVE FOR hIGhER LOAD VALUES

FLEXIBLE CEMENT-BASED ADhESIVE FOR hIGh LOAD VALUES

WATERPROOF JOINT COMPOUND

Application: For bonding ceramic tiles to wall and floor surfaces, exclusively solid bases (cement, lime and concrete-based mortars), for interior use, of excellent adhesiveness and high firmness.Preparation and application: The base to which the adhesive is applied must be solid, clean, load-bearing, unfrozen, free from blooming and free from oil or paint leftovers. The powder is added into approx. 26-28 % of water against intense mixing to obtain full homogeneity. The compound is left to rest for approx. 10 min., before it is mixed again to obtain the adhesive of appropriate thickness. The adhesive is applied with spiked trowel with appropriate tooth size, so that minimum 65 % of the tile surface is covered with the adhesive. Tooth size depends on tile dimension (optimum 4-6 mm for tiles the size of which is 10-25 cm). Tiles are inserted into a layer of adhesive and if the surface is uneven, the adhesive is also to be applied to tiles for the purpose of levelling. Wet highly-absorbent, porous tiles prior to laying. The excess adhesive is removed with wet sponge and hardened parts are removed mechanically. Open working time is approx. 20 min. (depending on the base). Skimming is possible after approx 24 hours. Consumption: approx. 3-3.5 kg/m2, depending on the base and coat thickness.Shelf life: 12 months in the original packaging in a dry room on pallets. Packaging: 25 kg.

Application: For bonding ceramic tiles to wall, floor and facade surfaces, i.e. exclusively hard bases (cement, lime and concrete mortars), for exterior and interior use, excellent adhesive properties, high hardness and waterproofness. It is used to bond absorbent ceramic tiles.Preparation and application: The base to which the adhesive is applied must be solid, clean, load-bearing, unfrozen, free from blooming and free from oil or paint leftovers. The powder is added into approx. 27-29 % of water against intense mixing to obtain full homogeneity. The compound is left to rest for approx. 10 min., before it is mixed again to obtain the adhesive of appropriate thickness. The adhesive is applied with spiked trowel, with appropriate tooth size, so that minimum 65 % of tile surface is covered with the adhesive (in case of interior use) and minimum 90 % (in case of exterior use). Tooth size depends on tile dimension (optimum 4-6 mm for tiles the size of which is 10-25 cm). Prior to laying, highly-absorbent tiles should be wetted. The excess adhesive is removed with wet sponge and hardened parts are removed mechanically. Open working time is approx 30 min. (depending on the base). Skimming is possible after approx. 24 hours. Application temperature: 5°C to 30°C. Do not work under direct sunshine, strong wind and rain. Consumption: approx. 3-3.5 kg/m2 , depending on the surface and application thickness.Shelf life: 12 months in the original packaging in a dry room on pallets. Packaging: 5 and 25kg.

Application: For bonding ceramic tiles, marble, granite, natural and artificial stone onto wall, floor and facade surfaces, i.e. exclusively hard bases (cement, lime and concrete mortars), for exterior and interior use. The adhesive has excellent adhesive properties, it is of high hardness, flexibility and is humid resistant. It is convenient for bonding low-absorbent tiles (~absorption ≤ 3%), tiles of big dimensions and for tiling on already tiled surfaces and on bases with under-floor heating.Preparation and application: The base to which the adhesive is applied must be solid, clean, load-bearing, unfrozen, free from blooming and free from oil or paint leftovers. The powder is added into approx. 27-29 % of water against intense mixing to obtain full homogeneity. The compound is left to rest for approx. 10 min., before it is mixed again to obtain the adhesive of appropriate thickness. The adhesive is applied with spiked trowel, with appropriate tooth size, so that minimum 65 % of tile surface is covered with the adhesive (in case of interior use) and minimum 90 % (in case of exterior use). Tooth size depends on tile dimension (optimum 4-6 mm for tiles the size of which is 10-25 cm). Tiles are inserted into a layer of adhesive and if the surface is uneven, the adhesive is also applied to tiles for the purpose of levelling. Wet highly-absorbent, porous tiles prior to laying. The excess adhesive is removed with wet sponge and hardened parts are removed mechanically. Open working time is approx. 30 min. (depending on the base). Skimming is possible after approx. 24 hours. Application temperature: +5°C to +30°C. Do not work under direct sunshine, strong wind and rain.Consumption: approx. 3-3.5 kg/m2, depending on the base and coat thickness.Shelf life: 12 months in the original packaging in a dry room on pallets. Packaging: 5 and 25kg.

Application:highquality,waterproofjointcompoundintendedforceramicandglasstilesandtilesofartificial and natural stone, on horizontal and vertical surfaces. It is intended for 10 mm wide joints, for interior and exterior use. The joint compound is mould resistant. It is available in 24 shades. Preparation and application: Prior to joint compound application, seams are to be cleaned from adhesive remains and dust. Seams are to be wetted 1 hour prior to jointing in case of highly-absorbent tiles and when working at high temperatures. The joint compound is prepared by gradually adding approx. 28 % of water against constant mixing until it is fully homogenized. The prepared compound is to be used within 1 hour. It is applied with rubber trowel or with 45 degree angled trowel, thus ensuring complete filling of seams with the joint compound. After 20-30 min., when the joint surface hardness, tiles are wiped with wet sponge in the direction diagonal to the laid tiles, and then polished with dry cloth. Walking is possible on floor tiles after minimum 8 hours after jointing if drying conditions are normal.Application temperature: +5°C to +30°C. high humidity and low temperatures can prolong jointcompound hardening time.Consumption: approx. 0.5-1 kg/m°, depending on seam width and tile size.Shelf life: 24 months in the original packaging in a dry room on pallets. Packaging: 2kg.Note: If porous tiles are jointed, test jointing is recommended. If the adhesive is not sufficiently dry, there is a possibility of a sporadic change of joint compound colour. The joint compound is not convenient for natural stone prone to colour change.

SYSTEM FOR ASSEMBLING CERAMICS www.bekament.com

C1

C2E

C2TE

S1


PRE-MADE SKIM COAT COMPOUND FOR INTERIOR WALLS LEVELING

PRE-MADE SKIM COAT COMPOUND WITh MICROFIBERS FOR EXTERNAL WALLS LEVELING

Application: Pre-made skim compound for mechanical and manual thin-layer leveling of interior walls.Preparation and application: The base to which it is applied must be solid, clean and dry, and in case of highly absorbent surfaces, it has to be impregnated with BK-Podloga or BK-Nivelator. The compound is applied with steel trowel, usually in two layers, in the total thickness of up to 3 mm. After mechanical application, the surface is manually troweled in order to remove the excess material. The other layer is applied after the first one is completely dry, and possible wrinkles from the layer should be removed with the appropriate glass paper, fineness 180-240, depending on the thickness and purpose. Consumption: approx. 1.5-2 kg/m2.Shelf life: 12 months in the original packaging in a dry room on pallets. Packaging: 3, 8 and 25 kg.

Application: Pre-made skim compound with microfibers for machine and manual thin-layer leveling of exterior walls.Preparation and application: The base to which it is applied must be solid, clean and dry, and in case of highly absorbent surfaces, it has to be impregnated with BK-Podloga or BK-Nivelator. The compound is applied with steel trowel, usually in two layers, either mechanically or manually, in the total thickness of up to 3 mm. After mechanical application, the surface is manually troweled in order to remove the excess material. The other layer is applied after the first one is completely dry, and possible wrinkles from the layer are removed with the appropriate glass paper, fineness 150-220, depending on the thickness and purpose. Consumption: approx. 1.5-2 kg/m2.Shelf life: 12 months in the original packaging. Store at temperatures between +5°C and +25°C, protected from sunlight and freezing. Packaging: 8 and 25 kg.

BK-GletEx Acryl

BK-GletEx S Acryl

BK-GletEx Universal

BK-GletEx

BK-GletEx Premium

BK-GletEx SCOMPOUND FOR MEChANICAL AND MANUAL LEVELING OF INTERIOR WALLS

SKIM COAT COMPOUND FOR INTERIOR WALLS LEVELING

INTERIOR WALL LEVELING COMPOUND

EXTERIOR WALL LEVELING COMPOUND

Application: Compound for thin-layer levelling of interior walls, for mechanical and manual use. Preparation and application: The base to which BK-GletEx Universal is applied must be solid, clean and dry and, if necessary, impregnated with BK-Podloga or BK-Nivelator in case of poorer, old or highly absorbent surfaces. The compound is prepared by adding powder to approx. 40 % of water and mixing it until the content is homogenous, with no lumps. The compound is left to rest for at least 30 minutes (and longer if possible). Prior to application, it should be mixed again and, if necessary, more water can be added to obtain the desired consistency. The compound is usually applied in two layers, either mechanically or manually, in the total thickness of up to 3 mm. The other layer is applied after the first one is completely dry, and possible wrinkles on the layer should be removed with the appropriate glass paper, fineness 180-240, depending on the thickness and purpose. Consumption: approx. 1.5-2 kg/m2, depending on the base roughness.Shelf life: 12 months in the original packaging in a dry room on pallets. Packaging: 25 kg.

Application: Powdery lime-based skim mixture for thin-layer levelling of interior walls. Preparation and application: The base to which it is applied must be solid, clean and dry, and in case of highly absorbent surfaces, it has to be impregnated with BK-Podloga or BK-Nivelator. The compound is prepared by adding powder to approx. 36 % of water and mixing it until the content is homogenous with, no lumps. The compound is left to rest for 10 minutes and prior to application, it should be mixed again. The compound is usually applied in two layers, manually, with metal trowel, in the total thickness of up to 4 mm. The other layer is applied after the first one is completely dry, and possible wrinkles on the layer should be removed with the appropriate glass paper, fineness 180-240, depending on the thickness and purpose. Consumption: approx. 1-1.5 kg/m2, depending on the coat thickness.Shelf life: 12 months in the original packaging in a dry room on pallets. Packaging: 5 and 25 kg.

Application: Lime-based skim coat compound for interior walls levelling. Due to a possibility of thicker coats, BK-Gletex Premium is extremely convenient for levelling rough walls treated with cement-lime, lime and plaster-lime mortars, as well as for levelling concrete and plasterboard slabs.Preparation and application: The base to which BK-GletEx Premium is applied must be solid, clean and dry, and in case of highly absorbent surfaces, it has to be impregnated with BK-Podloga or BK-Nivelator. The compound is prepared by adding powder to approx. 38% of water and mixing it until the content is homogenous with no lumps. The compound is left to rest for 10 minutes and prior to application it should be mixed again. The compound is usually applied in two layers, manually, with metal trowel, in the total thickness of up to 6 mm. The other layer is applied after the first one is completely dry, and possible wrinkles on the layer should be removed with the appropriate glass paper, fineness 180-240, depending on the thickness and purpose. Prior to dispersion paint application, it is necessary to prepare the surface by applying the primer.Consumption: approx. 1.5-2 kg/m2, depending on the coat thickness.Shelf life: 12 months in the original packaging in a dry room on pallets. Packaging: 25 kg.

Application: Micro-reinforced mineral-based powder for thin-layer levelling of exterior walls. It is used for manual application in the total thickness of maximum 5 mm.Preparation and application: The base to which BK-GletEx S applied must be solid, clean and dry and in case of highly absorbent surfaces, it has to be impregnated with BK-Podloga or BK-Nivelator. The compound is prepared by adding powder to approx. 40 % of water and mixing it until the content is homogenous, with no lumps. The compound is left to rest for 10 minutes and prior to application, it should be mixed again. The compound is usually applied in two layers, manually, with metal trowel, in the total thickness of up to 5 mm. The other layer is applied after the first one is completely dry, and possible wrinkles on the layer should be removed with the appropriate glass paper, fineness 150-220, depending on the thickness and purpose. Application temperature: +5°C to +30°C. Do not work under direct sunshine, strong wind and rain. Consumption: approx. 1.5-2.5 kg/m2, depending on the roughness of the surface.Shelf life: 12 months in the original packaging in a dry room on pallets. Packaging: 5 and 25 kg.

FLATTENING MORTARFLATTENING MORTARwww.bekament.com www.bekament.com


MEChANICAL MORTARS www.bekament.comFLATTENING MORTARwww.bekament.com

BK-Mal 120

BK-Mal 220

BK-Mal 320

SPRAYING CEMENT MORTAR

CEMENT-LIME MORTAR

PLASTER-LIME MORTAR

Application: Spraying cement mortar for manual and mechanical application on exterior and interior walls (brick, block, siporex block and concrete). It equalizes the absorption capacity of the base and renders rough surface and therefore improves the adhesiveness prior to rendering with machine mortars BK-Mal 220 and BK-Mal 420.Preparation and application: The base to which the mortar is applied must be solid, clean and dry, free from poorly bound parts. Absorbing bases need wetting or coating with BK-Nivelator prior to application. The mortar is prepared by intense mixing of the powder with approx. 23-25 % of water until it is fully homogenized. If possible, the mortar should rest a bit, and, prior to use, it has to be mixed once again and applied to the surface either manually or mechanically. The mortar is applied either mechanically or manually with plastering trowel or putty knife. It is usually applied in two phases, by applying the fresh to fresh, mechanical caterpillar method to the previously prepared base. After it is applied to the wall, the spraying mortar is not levelled, but left rough so that other type of mortar can be applied over it. BK-Mal 120 is not intended for filling holes on the base. The mortar must harden evenly. Direct heating of the mortar is not recommended. Application temperature: +5°C to +30°C. The mortar should be protected from too fast drying. Consumption: 8-12 kg/m2, depending from the thickness and coverage. Shelf life: 12 months in the original packaging in a dry room on pallets. Packaging: 40 kg.

Application: Cement-lime mortar for mechanical and manual application to interior walls (brick, blocks, siporex blocks and concrete). It is convenient for sanitary blocks and for surfaces to which ceramic equipment will be placed.Preparation and application: The base to which the mortar is applied must be solid, clean and dry, free frompoorlyboundpartsandgreasystains.holes, jointsandelectricpoweropeningsshouldbeclosedprior to rendering. In case of rendering concrete or other smooth surfaces, it is necessary to apply BK-Beton Kontakt to the base in order to improve mortar adhesiveness. In case of highly-absorbent, porous bases (e.g. siporex blocks) BK-Nivelator should be applied to the base to prevent uneven mortar drying and cracking. In case of significant unevenness of the surface, BK-Mal 120 should be applied. The mortar is prepared by intense mixing of the powder with approx. 22-24 % of water. The mortar should be applied by the mechanical caterpillar method, in the thickness of minimum 10 mm and maximum 25 mm. Following that, themortar istobespreadwithh-rod,cut-off, feltedandflatten. Incasegreaterthicknessesarerequired, the mortar is to be continuously, fresh on fresh, applied until the required thickness (max. 40 mm) is obtained. The mortar must harden evenly. Direct heating of the mortar is not recommended. Consumption: approx. 11-12 kg/m2/cm of thickness. Application temperature: +5°C to +30°C. The mortar should be protected from too fast drying. Shelf life: 12 months in the original package in a dry room on pallets. Packaging: 30 kg.

Application: Plaster-lime mortar for mechanical and manual application to interior walls (brick, blocks, siporex blocks and concrete). It is not convenient for sanitary blocks or for surfaces to which ceramic tiles will be laid.Preparation and application: The base to which the mortar is applied must be solid, clean and dry, freefrompoorlyboundparts,greasystainsetc.holes, jointsandelectricpoweropeningsshouldbe closed prior to rendering. In case of rendering concrete or other smooth surfaces, it is necessary to apply BK-Beton Kontakt to the base in order to improve mortar adhesiveness. In case of highly-absorbent, porous bases (e.g. siporex blocks) BK-Nivelator should be applied to the base to prevent uneven mortar drying and cracking. The mortar is prepared by intense mixing of the powder with approx. 30% of water. The mortar should be applied by the mechanical caterpillar method, in the thickness of minimum 10 mm and maximum 25 mm. Following that, the mortar is to be spread withh-rod, cut-off, feltedand flatten. In casegreater thicknessesare required, themortar is tobe continuously, fresh on fresh, applied until the required thickness (max. 40 mm) is obtained. The mortar must harden evenly. Direct heating of the mortar is not recommended. Consumption: approx. 10-11 kg/m2/cm of thickness. Application temperature: +5°C to +30°C. The mortar should be protected from too fast drying. During the drying and hardening phase, additional mortar wetting is not allowed.Shelf life: 12 months in the original packaging in a dry room on pallets. Packaging: 30 kg.

SELF-LEVELING FLOOR MIXTURE

Application: Self-spreading mixture for thin-layer levelling of cement floor surfaces prior to placing parquet, ceramic tiles, PVC and other floorings in residential, business and similar facilities. Maximum layer thickness is 5 mm and drying time is 1 day/mm of thickness. Greater thickness is obtained by applying multilayers.Preparation and application: The foundation to which the mixture is applied has to be solid, clean and free from dust. In order to obtain as good adhesiveness to the foundation as possible, it is recommended to apply BK-Acryl base as per instruction, independently of the foundation quality. In case of new cement lining, it is possible only to pre-wet the foundation, whereas in the case of absorbent, old linings impregnation is obligatory. The mixture is prepared by adding powder to approx. 23 % against constant mixing until full homogeneity is obtained. The prepared material is spread with trowel and particular caution should be paid to corners. After spreading, it is desirable to remove the surface air with special spiked roller (comb). Application temperature: +5°C to +25°C. The mortar should be protected from too fast drying. Consumption: approx. 1 kg/m2/mm of thickness.Shelf life: 12 months in the original packaging in a dry room on pallets. Packaging: 25 kg

BK-Liv


BK-hidroStop 1

BK-hidroStop 2

SINGLE-COMPONENT WATERPROOFING FLEXIBLE COAT

TWO-COMPONENT WATERPROOFING COAT

Application: Single-component, waterproofing, flexible coat for horizontal and vertical protection from humidity. It is used for waterproofing of potentially humid rooms: kitchens, bathrooms, shower cabins, swimming pools, cellars, terraces etc. It is intended for interior and exterior use, for the positive and negative, ≤1.5 bar, water pressure. This material is not intended for final surface treatment or for systems in permanent contact with water. Preparation and application:ThebasetowhichBK-hidroStop1isappliedhastobesolid,freefromdust, free from oils, mould and poorly bound parts. Smooth, poorly absorbing types of concrete are to be coated with BK-Beton Kontakt. The coat is prepared by mixing it with approx. 30 % of water until full homogenization is obtained. The mixture rests for approx. 5 min. and then it is mixed again and applied to the prepared base within 60 minutes. It is applied with a brush in two cross coats, until the surface is fully covered. The thickness of one layer is approx. 1 mm, and the other layer is applied after the first one hardens. The waterproofing coat is to be protected from fast dehydradtion (sun, wind, etc.).Consumption: approx. 2-2.5 kg/m2, depending on the base quality. Application temperature: +5° to +30°C.Donotworkindirectsunlight,windandrain.highhumidityand low temperatures can extend the coat drying time. Shelf life: 12 months in original packaging in a dry room on pallets.Packaging: 25 kg.

Application: Two-component, waterproofing, polymer-cement coat for horizontal and vertical protection from humidity. It is used for waterproofing of potentially humid rooms: kitchens, bathrooms, shower cabins, swimming pools, cellars, terraces etc. It is intended for interior and exterior use, for the positive and negative, ≤1.5 bar, water pressure. This material is convenient for waterproofing of surfaces under a prolonged direct contact with water.Preparation and application:ThebasetowhichBK-hidroStop2isappliedhastobesolid,freefromdust, free from grease, mould and poorly bound parts. Smooth, poorly absorbing types of concrete are to be coated with BK-Beton Kontakt. The mixture is prepared by slowly mixing the powdery A component with the liquid B component and by adding smaller quantities of water to achieve the right consistency (5-8 % to the total content). The content homogeneity is to be good. It is carefully applied with brush in two to three coats, with cross movements until the surface is fully covered. The thickness of a layer is approx. 1-2 mm, and the next layer is to be applied after the previous one hardens. It is recommended to level the finish layer with metal trowel. The prepared content is to be used within 1 hour. The waterproofing coat should be protected from fast dehydration (sun, wind, etc.). Consumption: approx. 2-2.5 kg/m2, depending on the base quality. Application temperature: +5°C to +30°C. Do not work under direct sunlight, wind and rain. highhumidity and low temperatures can extend the coat drying time. Shelf life: 12 months in the original packaging in a dry room on pallets. B component is to be protected from sunlight and freezing.Packaging: 20 kg of A component and 5 l of B component, 10 kg of A component and 3 l of B component

hYDRO INSULATION MATERIALS www.bekament.comMEChANICAL MORTARSwww.bekament.com

BK-Mal 420REINFORCED CEMENT-LIME MORTAR

Application:Reinforced cement-limemortar formechanical andmanualapplication toexteriorwalls(brick, blocks, siporex blocks and concrete). It is convenient for sanitary blocks and for surfaces to which ceramic tiles will be laid. Its properties are high mechanical hardness and good adhesiveness to the base, which is why this type of mortar is particularly convenient for use at places where heavier wall elements will be additionally placed. Preparation and application: The base to which the mortar is applied must be solid, clean and dry, free frompoorlyboundpartsandgreasystains.holes,jointsandelectricpoweropeningshouldbeclosedpriorto rendering. In case of rendering concrete or other smooth surfaces, it is necessary to apply BK-Beton Kontakt to the base in order to improve mortar adhesiveness. In case of highly-absorbent, porous bases (e.g. siporex blocks) BK-Nivelator should be applied to the base to prevent uneven mortar drying and cracking. In case of significant unevenness on the surface, BK-Mal 120 should be applied. The mortar is prepared by intense mixing of the powder with approx. 22-24 % of water. The mortar should be applied by the mechanical caterpillar method, in the thickness of minimum 10 mm and maximum 25 mm. Following that,themortaristobespreadwithh-rod,cut-off,feltedandflatten.Incasegreaterthicknessesarerequired, the mortar is to be continuously, fresh on fresh, applied until the required thickness (max. 40 mm) is obtained. The mortar must harden evenly. Direct heating of the mortar is not recommended.Application temperature: +5°C to +30°C. The mortar should be protected from too fast drying.Consumption: approx. 11-12 kg/m2/cm of thickness. Shelf life: 12 months in the original packaging in a dry room on pallets. Packaging: 30 kg.

BK-hidroStop ExtraFLEXIBLE WATERPROOFING COAT

Application: Waterproofing, flexible coat for horizontal and vertical protection from humidity. It is used for waterproofing of potentially humid rooms: kitchens, bathrooms, shower cabins, swimming pools, cellars, terraces etc. It is intended for interior and exterior use, for the positive and negative, ≤1.5 bar, water pressure. Due to its high flexibility it is convenient for the protection of surfaces exposed to stresses.Preparation and application:ThebasetowhichBK-hidroStopExtraisappliedhastobesolid,freefromdust, free from grease, mould and poorly bound parts. Smooth, poorly absorbing types of concrete are to be coated with BK-Beton Kontakt. The coat is prepared by its mixing with approx 30 % of water, until full homogeneity is achieved. The content rests for approx. 5 min. and then is mixed again and applied to a wet surface within 60 minutes. It is applied carefully with brush, in two cross coats, until the surface is fully covered. The thickness of one layer is approx. 1 mm and the other layer is applied after the first one hardens. The waterproofing coat is to be protected from fast dehydration (sun, wind, etc.).Consumption: approx. 2-2.5 kg/m2, depending on the base quality. Application temperature: +5°C to +30°C.Donotworkunderdirectsunlight,windandrain.highhumidityand low temperatures can extend the coat drying time. Shelf life: 12 months in the original packaging in a dry room on pallets. Packaging: 5 kg.

36 BEKAMEnT PRODUCT CATALOGUE

hYDRO INSULATION MATERIALSwww.bekament.com

BK-hidrostop 5/5TWO-COMPONENT WATERPROOFING FLEXIBLE COAT

Application: Two-component, waterproofing, flexible, polymer-cement coat for horizontal and vertical protection from humidity. It is used for waterproofing of potentially humid rooms: kitchens, bathrooms, shower cabins, swimming pools, cellars, terraces etc. It is intended for interior and exterior use, for the positive and negative, ≤1.5 bar, water pressure. Preparation and application: The surface towhich BK-hidroStop 5/5 is applied has to be solid,free from dust, free from grease, mould and poorly bound parts. Smooth, poorly absorbing types of concrete are to be coated with BK-Beton Kontakt. The coat is prepared by adding the powdery A component into the liquid B component against mixing until full homogenization. The content is to rest for approx. 5 min. and then mixed again. For the first layer 10 % of water may be added to the prepared content. The prepared content is to be used within 1 hour. The layer thickness is approx. 1 mm, and the second layer is applied after the previous hardens. The waterproofing coat is to be protected from fast dehydration (sun, wind, etc.). Application temperature: +5°C to +25°C. Consumption: approx. 2-2.5 kg/m2, depending on the base quality. Shelf life: 12 months in the original packaging in a dry room on pallets. Packaging: 10 kg (two components packed together).

BK-FleksWATERPROOFING COAT FOR FLAT ROOFS

Application: Waterproofing, flexible coat is intended for rehabilitation and protection of flat roofs. Its adhesiveness to concrete is good and the dry film is exceptionally elastic and waterproof. Preparation and application: The base to which it is applied has to be solid, clean and free from dust. In case of older surfaces, it is necessary to remove all parts that do not adhere well to the surface and uneven parts and cracks are to be filled with a flexible filling. It is necessary to impregnate the bases with BK-Fleks diluted with water in the 1:1 ratio, after which an undiluted dispersion is applied with a brush. It is recommended to reinforce the coat by inserting a glass grid while the first layer is still wet. When the first layer is completely dry (min. 12 hours), the second layer is applied, and, if necessary, the third as well.Application temperature: 5°C to 25°C. Until the film hardens it is necessary to protect the coat from a direct impact of rain, fast drying and frost. Consumption: approx. 0.7 kg/m2, depending on the roughness of the base.Shelf life: 18 months in the original packaging. Store at temperatures between +5°C and +25°C, protected from sunlight and freezing. Packaging: 6 and 20 kg.Important: Surfaces to which BK-Fleks is applied must have a slight inclination and steam barrier.


PhASES OF WORK: SYSTEM COMPONENT: CONSUMPTION: DRYING: FEATURES:

LAMINATION

Approx. 5.0-7.0 kg/m² 1 day

Excellent quality processing Good adhesion Universal application highvapourpermeability

2 plates per m²

Easy processing Optimal thermal protectionOld ConstructionNew Construction

Angles: 4 pcs / m² Flat panels: 6 pcs / m²

Additional plates fixing There is no risk of corrosion

MESH INSTALLATION AND PLATES ADJUSTMENT

1.1 m²Resistancetoalkalishighresistancetopulling,tearingandstretchingThere is no possibility of softening

Approx. 5.0 - 6.0 kg / m² 7 days


IMPREGNATION AND INSTALLATION OF THE

FINISH DECORATIVE FACADE

0.25 kg/m² 24 hoursTo improve adhesion, equalization, neutralization, firming and water resistance of all mineral and other surfaces

1.5mm / reib/ 2.5kg / m²1.5mm / full / 2.7kg / m²2.0mm / reib/ 3,0kg / m²

2.0mm / full / 3,15kg / m²

Minimum 7 days under stable weather

conditions *

highvapourpermeabilityhighwaterresistancehighmechanicalstrengthExcellent processing quality

* Stable weather conditions are those in which the temperature will not fall below the threshold default values (+ 15°C for silicates, + 5°C for other decorative façades), and if there is no recorded occurrence of precipitation nor high humidity.

INSULATIONLarge climate changes that are happening around the world lead us to think carefully about the attitude towards the environment in which we live as well as about the maximum energy saving. Environmental, economic and energy crisis suggest that the current way of exploitation of resources is unsustainable and that the ecology and energy are two causal problems of the future of humanity. Architecture has become one of the primary goals of environmental reform because it is estimated that residential buildings use 1/6 of the world's stock of drinking water, 1/4 of forest areas and 2/5 of fossil fuels. In a residential building 20% of its energy is lost through the roof, 20% through the windows and doors, 6% through basement slab and 25-40% through walls.The role of the external wall as a protective element of building is to protect it from overheating, heat loss, atmospheric effects, and it has also a good accumulative ability to provide heat in the house as well as the acoustic comfort with the aim to reduce energy consumption. As the largest losses are through the exterior walls, company Banja Komerc Bekament has decided to develop a façade systems with the aim to reduce the energy consumption. All the products of Banja Komerc Bekament have certificates and attestations in our country and in the EU. Banja Komerc Bekament has been certified by ETA (European Technical Assessment) standard, which confirms the quality of our products, in addition to ISO-9001 and ISO-14001 standards.

Rock wool is recommended as insulation for tall buildings from the third floor and above for the fire protection.

INITSTRAININGCENTER,COMPANYBANJA KOMERC BEKAMENT LTD.PROVIDESTRAININGANDISSUESCERTIFICATESThATThECONTRACTORASWELLASThEPRODUCERCANGIVEASAGUARANTEEONThEQUALITYANDDURABILITYOFMATERIALSANDPERFORMEDWORKS

highlydurableandresistantthermalinsulationsystem-Bekatherm Prestige insulation system with BK-StirolFix Special adhesive - offers high resistance, high thermal and sound insulation and guarantees long lifetime. The combination of the fins of rock wool combines non combustibility and high permeability.

Variety of primers: ** BK-Grund Universal - universal primer ** BK-Micro Grund Universal - universal primer with micro-fibres ** BK-Grund Silicat - primer on silicate basis. Variety of final decorative façade: ** BK-Sil - Silicone decorative façade ** BK-Sil Si & Si-silicate-silicone decorative façade ** BK-S Plast - silicate decorative façade ** BK-Briv Special - gentle mineral thin layer decorative façade

INSULATION SYSTEMSwww.bekament.com INSULATION SYSTEMS www.bekament.com

WARRANTY

www.bekament.co

m

Insulation Systems. YEARS



LAMINATION

Approx. 4.0 kg/m² 1 day


2 pcs per 1,5m²

Easy processingOptimum thermal protectionOld ConstructionNew Construction

FIXINGThEBUILDINGUPTO20mhEIGhTISNOTNEEDED


1,1 m²Resistancetoalkalishighresistancetopulling,tearingandstretchingThere is no possibility of softening

Approx. 4.0 kg/m² 3 days





1.5mm / reib / 2.5kg / m² 1.5mm / full / 2.7kg / m² 2.0mm / reib / 3,0kg / m²2.0mm / full / 3,15kg / m²


conditions *

highstrengthNon combustibilityExcellent quality processing

* Stable weather conditions are those in which the temperature will not fall below the threshold default values (+ 15°C for silicates, + 5°C for other decorative façades), and if there is no recorded occurrence of precipitation, nor high humidity.

EXTRUDED POLYSTYRENE PANELS - XPSEXPANDED POLYSTYRENE PANELS - EPS


LAMINATION

Approx. 4.0 kg/m² 1 day


2 plates per m²

Easy processing Optimal thermal protectionThickness of the insulation as needed Old construction, New construction

Angles: 4 pcs / m² Flat panels: 6 pcs / m²

Additional panel fixing There is no danger of corrosion


1.1 m²Resistancetoalkalishighresistancetopulling,tearingandstretchingThere is no possibility of softening

Approx. 4.0 kg/m² 7 days





1.5mm / reib / 2.4 kg / m² 1.5mm / full / 2.7 kg / m²

2.0 mm / reib / 2.7 kg / m²2.0mm / full / 3,15kg / m²


conditions *

highwaterresistancehighmechanicalstrengthExcellent processing quality

* Stable weather conditions are those in which the temperature will not fall below the threshold default values (+ 15°C for silicates, + 5°C for other decorative façades), and if there is no recorded occurrence of precipitation, nor high humidity.

Economical and tested system of thermal insulation Bekatherm Standard insulation system meets the technical and economic requirements of the external building insulation. Combination with expanded polystyrene panels (EPS) unites durability and economy.

Variety of primers:

** BK-Acryl - primer on the acrylic basis ** BK-Grund Universal - universal primer ** BK-MicroGrund Universal - universal primer with micro-fibres

Variety of final decorative façade:

** BK-Sil-silicone decorative façade ** BK-Sil - Acrylic decorative façade ** BK-Briv Special - gentle mineral thin layer decorative façade

Persistent and high resistant thermal insulation system Bekatherm Plus thermal insulation system offers high resistance ensures a long lifetime and high thermal insulation. The combination with extruded polystyrene panels is used for insulation of the retaining house walls, the universal application and high strength.

Variety of primers:

** BK-Acryl - primer on the acrylic basis** BK-Grund Universal - universal primer ** BK-MicroGrund Universal - universal primer with micro-fibres

Variety of final decorative façade:

** BK-Sil - Silicone decorative façade ** BK-Sil - Acrylic decorative façade ** BK-Kul - decorative mosaic plaster ** BK-Briv Special - gentle mineral thin layer decorative façade

INSULATION SYSTEMSwww.bekament.com INSULATION SYSTEMS www.bekament.com

In order to maximize the compliance with the requirements of clients in the current offer there are over 1000 shades of plasters and dispersion paints that can be made in Bekament Mix System.

25 kg ≈ 100 m²INTWOLAYERS

Banja Komerc Bekament DOO34304 BanjaArandjelovac

SERBIA

Tel: +381 34 6777 500Fax: +381 34 6777 506

E-mail: [email protected]

WWW.BEKAMENT.COM

Date post:	25-Jul-2020
Category:	Documents
Upload:	others
View:	2 times
Download:	0 times

PRODUCT CATALOGUE - BekamentBEKAMENT PODUCT CATALOGUE 3About the Company Not far from the city of...

Documents