PRODUCT CATALOGUE ISSUE 3 - Passcomm · 1 Fibre Optic Products and Accessories 2 High Performance...

PRODUCT CATALOGUE ISSUE 3

TO O R D E R Te l : 0 192 5 82 1333 Fa x : 0 192 5 82 132 1 Ema i l : sa [email protected] .ukII

1 Fibre Optic Products and Accessories

2 High Performance Fibre Optics

3 Copper Termination and Jointing Products

4 Railway Products

5 Cabinets and Racks

6 Passive Optical LAN

7 Test Equipment and Tools

8 Highways Products

9 Free-Air Cooling

Te l : 0 192 5 82 1333 Fa x : 0 192 5 82 132 1 Ema i l : sa [email protected] .uk TO O R D E R 1

Sections

TO O R D E R Te l : 0 192 5 82 1333 Fa x : 0 192 5 82 132 1 Ema i l : sa [email protected] .uk2

About Us

Passcomm provides telecoms

solutions across a broad range of

industries. Whether it’s transportation,

utilities, oil and gas, tunnel signage

or fibre connectivity, the Passcomm way of working

is very simple; partner

with industry-leading

manufacturers to deliver

best in-class integrated

solutions.

We operate with

complete flexibility and commitment to offering

bespoke, in-house design,

tailored to customer and

project requirements.

Based in Warrington,

Cheshire, the business

thrives on a challenge.

With over 75 years

combined experience in the telecoms

industry, we have

a passionate and

committed approach

to delivering for our

customers.

Passcomm provides solutions, not

products. We provide these solutions

by first understanding our clients’ needs, then drawing on a wealth of

in-house telecoms knowledge and

experience.

Whether it’s a new

opportunity or a long-

standing relationship,

we pride ourselves

on delivering value-

added results. It drives

everything we do, every

day.

• It’s why we hold

numerous Network

Rail PADS acceptance

documents.

• It’s why we hold

annual technology

events for our clients to

showcase our suppliers’

latest innovations.

• It’s why we are

recognised as a trusted

advisor to Network Rail

and have been for over

16 years.


• It’s why customers from many different

industries rely on our flexible way of working.

Embracing new technologies has led

Passcomm to operate in a diverse mix of sectors and industries. Wherever we

are working, the Passcomm method

is always the same: carefully select

best-in-class supply partners and work

closely with them to understand the right

technologies to take to our customers.

In addition to delivering telecoms to

the transportation and utilities sectors,

Passcomm;

• Supplies Diamond high

performance fibre-optics for laser, photonics, harsh environment

and higher education research

applications - Section 2.

• Specialises in FTTx fibre-optic connectivity (Passive Optical LAN

and G-PON) – Section 6.

• Partners with SPIE to design

and engineer tunnel signage –

Section 8.

• Supplies the 4Energy Free-Air

Cooling System – Section 9.

Op t i c a l F i b r e P r o d u c t s a n d A c c e s s o r i e sOptical Fibre Products and Accessories


Optical Fibre Products and Accessories


Section 1Optical Fibre Products and AccessoriesContents

Optical Terminations

Fibre Optic Closures

Wall Mounted Closures

Powered Fibre Systems

FTTx Closures

Optical Distribution Frames

Fibre Accessories



Fiber Boxes At a Glance

VERTICAL MDU SOLUTIONS

BUDI-2S BUDI-1S BUDI-S BUDI-M FOWB MOBI MOBI

CO

MM

ON

FEA

TURES

BEST APPLICATION Building entranceSingle operator

Building entranceSingle operator




Building entranceOperator boxMulti operator

Buidling entranceCustomer boxMulti operator

INDOOR/OUTDOOR IP54 IP54 IP54 IP54 IP20 IP54 IP54

OUTER SIZE (H X W X D) 285x155x60 mm 420x240x120 mm 500x295x145 mm 550x360x175 mm 220x140x35 mm 183x456x155 mm 183x456x155 mm

SPLICE CAPACITY - SINGLE ELEMENT

36 96 168 216

SPLI

CED

SPLICE CAPACITY - SINGLE CIRCUIT

12 32 56 72

CABLE LOOP

SPLICE CAPACITY - SINGLE ELEMENT

48 48 144 144 24

CO

NN

ECTO

RIZ

ED

SPLICE CAPACITY - SINGLE CIRCUIT

12 16 48 48 3-7 mm

CABLE LOOP N/A

SC CONNECTIONS 8 16 24 up to 48 12

LC CONNECTIONS 12 32 48 72 24

PLU

G-A

ND

-PLA

Y SPLITTER MODULES 4 OCM6 6 OCM6 3 OCM7

SC CONNECTIONS 24 up to 96 48 48

LC CONNECTIONS 48 96 48

CABLE LOOP

320390.1 © 2015 CommScope All Rights Reserved.

BEST APPLICATION INDOOR/OUTDOOR FIBER COUNT CABLE DIAMETER PRE-TERMINATED CONNECTORS

CA

BLI

NG

MINI-BREAKOUTBuilding entrance

to floorIndoor 12/24 8.2 mm Possible SC/LC

MINI-BUNDLEBuilding entrance

to floorIndoor 48/72/96 8.2/9/11 mm Splicing only

TE

CO

NN

EC

TIV

ITY

- O

PT

ICA

L C

AB

LE

- M

INIB

RE

AK

OU

TT

E C

ON

NE

CT

IVIT

Y -

OP

TIC

AL

CA

BL

E -

MIN

IBU

ND

LE



Optical Terminations Passcomm manufactures fibre optic assemblies to national, international and customer specifications. Each termination is tested to stringent standards to ensure optical, mechanical and geometrical parameters meet

or exceed requirements. All industry standard connectors are terminated, such as FC/PC, SC/PC, ST, FC/APC and SC/APC.

To order terminated assemblies, contact our sales team today on 01925 821333.

Adapters and AttenuatorsAdaptersSinglemode and Multimode adaptors

can be supplied or pre-fitted in patch

panels or wall-mounted enclosures.

Attenuators Attenuators are available off

the shelf in a range of plug

types, polish grades and dB

values.

Attenuators are used to reduce

the power of a signal without

appreciably distorting its wave

form.

Ilsintech Splice-On Connectors Passcomm offers a range of Ilsintech

Splice-On Connectors, designed for FTTH

networks.

This includes:

• SC Type Connectors

• LC Type Connectors

• FC Type Connectors

• ST Type Connectors



Passcomm offers a bespoke kitting service for all Fibre and Copper Joints. To discuss your joint kitting

requirements in detail, call the Passcomm Sales team today on 01925 821333.

Fiber Closures At a Glance

FIST FOSC FIST-EDSA TENIO MST OTE

Number of Fibers Up to 960 Up to 768 Up to 192 Up to 192 Up to 12 Up to 48

Best Application Large fiber counts Large fiber counts Spliced drop closure Spliced drop closurePre-Terminated /

Pre-Cabled/Hardened Drop Closure

Spliced Closure with Hardened Drops

Ability to Grow

Flexibility Excellent Good Good Excellent Excellent Excellent

Feeder OSP Excellent Excellent Not Recommended Good

Distribution OSP Excellent Excellent Good Excellent

Drop OSP Not Recommended Not RecommendedExcellent for blown

fiber applicationExcellent Optimal Optimal

Looped Cable

Pre-Cabled

Pre-Terminated /Hardened

Field-Terminated

Single Circuit Splicing N/A

Single Element Splicing N/A

Spliced

Splitter

Fiber count per tray 4/8/12 12/24/48/96 4/8/12 12/24 N/A 12


Fibre Optic Closures



CommScope Tenio

TENIO™ fibre closures offer an innovative fibre connectivity and management solution for the

outside plant area of the network.

TENIO modular fibre closures feature a tool-less, fully-mechanical, innovative design, which assures

rapid installation and easy ongoing maintenance.

Designed for use with any fibre cable construction, such as loose buffer tube, central core tube, or loose

fibre. The closures can be deployed in any aerial, pedestal, handhole or manhole environment.

• Reduced total cost of ownership

• Tool-less, intuitive design assures rapid

installation and easy on-going maintenance

by less technical workforce

• Optimised cash flow and ROI• Modular closure platform allows phased

network deployment, lower initial CapEx expenditure

• Fibre and cable technology independent

Building on almost 30 years of innovation and

industry leadership, TENIO closures enable

30-percent faster, future-proof network deployments

in 30-percent less space.

TENIO closures feature modular building blocks and

combine proven fibre management hardware with a new sealing system to simplify training and reduce

inventory. The closure’s 100-percent mechanical,

tool-less and intuitive design facilitates lower-skilled

network deployments.

Full modularity of the closure platform supports

a phased CAPEX network deployment scheme,

reducing up-front CAPEX investment.

CommScope’s superior gel-sealing technology

guarantees sealing for most commonly available

cable types.

Designed for use with various cable constructions

(loose buffer tube and microsheath), the closures

deploy in any environment (aerial, pedestal,

handhole and manhole).

Cable Outs Diameter Range (mm) Max no. of In / Out ports

2a

2b

2c

13-16

11-14

9-12

12

3a

3b

7-10

5-8

18

3 flat 3 / 5 – 6 / 9 18

4 3-6 24

5 2-4 30



An introduction to the CommScope FIST SystemThe FIST (Fibre Infrastructure System Technology) philosophy calls for a ‘Total Fibre Management Solution’

which accommodates the following network requirements:

• A stable optical platform

• Network flexibility to suit different applications• Flexibility to accept changes in fibre infrastructure

(future proof)

• An end to end system solution

• Improved quality of service

• Easy integration with existing fibre networks• Cost effectiveness

The updated FIST-MK2 maintains the same system

philosophy. However, a number of innovative

capabilities and new features have been added:

• Compatibility with all common cable constructions;

e.g. Loose tube, central core, ribbon and blown

fibre cables• Reduction of installation time up to 30%

• Increase of fibre density and configuration flexibility in outside plant network elements

• Provision for controlled single circuit and

single element fibre management for in-line network elements

CommScope FIST-GCO2The generic closure FIST-GCO2 is an environmentally sealed enclosure for the FIST fibre management system allowing splicing and passive component integration in the external network.

Fibres Trays Fibres Trays Fibres Trays

GCO2 BC6 BC6 BD6 BD6 BE6 BE6

Single Circuit Splicing

Capacity

80 40 144 72 208 104

Single Element Splicing

Capacity

240 20 432 36 624 52

R4/R8 Splicing Capacity 160 20 288 36 416 52

R12 Splicing Capacity 144 12 288 24 384 32

Features • Single-ended design

• Base and dome sealed with clamp and O-ring

system

• 6, 8 or 16 round entry/exit ports for drop cables and 1 or 2 oval ports for looped cable

• UMS (universal mounting system) profiles provide foundation for mounting combinations of SOSA2

(splice only sub-assembly) and/or SASA3 (splitter array sub-assembly) modules, which consist of a

modular grooveplate and trays

• Compatible with most common cable types: e.g.

loose tube, central core, ribbon fibre and blown cabling

• Uncut fibres can be stored as single circuits in trays and/or as cable elements in storage space between profiles

• Storage baskets available for mass storage of

fibres of central core cable constructions• Closure can be

used in aerial,

pedestal and

underground

(up to 5 meters

head of water)

environments



CommScope FIST-GCO2-F (Flat)The generic closure FIST-GCO2 is an

environmentally sealed enclosure for the FIST

fibre management system allowing splicing and passive component integration in the external network.


• Base and dome sealed with clamp and

O-ring system

• 6, 8 or 16 round entry/exit ports for drop cables and 1 or 2 oval ports for looped

cable

• UMS (universal mounting system)

profiles provide foundation for mounting combinations of SOSA2 (splice only sub-

assembly) and/or SASA3 (splitter array sub-assembly) modules, which consist of

a modular grooveplate and trays

• Compatible with most common cable

types: e.g. loose tube, central core, ribbon

fibre and blown cabling

• Uncut fibres can be stored as single circuits in trays and/or as cable elements in storage space between profiles

• Storage baskets available for mass

storage of fibres of central core cable constructions

• Closure can be used in aerial, pedestal

and underground (up to 5 meters head of

water) environments



CommScope FIST-EDSA

The FIST-EDSA FTTH closure enables faster and

easier installation of direct buried cables and speed

pipes.

The FIST-EDSA features innovative sealing and

cable retention for a range of cables, combined

with proven gel seal technology and FIST fibre management hardware.

Features

• Single-ended base and dome design with

only two latches

• Four long oval-shaped gel-sealed drop ports

for 12 drop cables each (maximum 48 drops)• One oval shaped gel-sealed feeder port

• Feeder loop possibility

• Feeder cable diameter maximum 16mm• Drop cable diameter range: 5-8mm

• Fast, easy, toolless installation

• Single-sided UMS (Universal Mounting

System) frame allows mounting of FIST

management grooveplates and trays

• Repair and upgrade possibility

• Intuitive identification• Eliminates need for waterblock connectors

• New cable attachment design: toolless and

wrap-around installation

Dimensions in mm

Length 560

Width at base 270

Depth at base 150

Cable port dimensions in mm

Drop ports 1, 2, 3 and 4 112 x 40

Feeder port 67 x 40

Cable diameter in mm

Feeder port (2 cables/port)

Minimum ø 5

Maximum ø 16

Drop ports (12 cables/port)

Minimum ø 5

Maximum ø 8

Splice Capacity Fibres Trays

Single circuit splicing

(2 primary coated fibres)64 16

Single element splicing

(12 primary coated fibres)96 8



CommScope FIST-SCO2-BE6 & 10

This slim metal closure is specially

designed to fit in small sewage canal systems and is therefore resistant to very aggressive

environments. The FIST-SCO2 has the following

functionality and features:

• Single ended design

• Base and dome are made in AISI 316L stainless steel and are sealed with an O-ring under

controlled compression

• Base and dome contain fixation holes to mount the closure against the wall

• 6 or 10 round entry/exit ports for drop cables and 1 oval port for looped (uncut) cable

• Heat-shrinkable cable seals

• The base has an earthing provision and a ‘flash test’ valve

• The UMS (Universal Mounting System) profiles provide the foundation for mounting combinations of SOSA2 (Splicing Only Sub-Assembly) and/or SASA2 (Splitter Array Sub-Assembly) modules, which consist of a modular grooveplate and trays

• The FIST MK2 organiser system allows fibre management in a single circuit or single element way

• Uncut fibres can be stored as single circuits in SC trays or as loose buffer tubes at the back side of the UMS profile

Splicing Capacity (in # fibres) Fibres Trays

Single Circuit, primary coated 96 48

Single Element, primary coated (8 fibres/tray) 192 24

Single Element, primary coated (12 fibres/tray) 288 24



CommScope FIST-SOSA2Splicing sub-assemblies are the essential building

blocks that allow the user to build a variety of

networks.

A SOSA2 sub-assembly consists of the following

parts:

• Organiser trays, designed to store fibre and splices

• A ‘wraparound’ grooveplate designed

with slots for routing fibre to and from the organiser trays

Different types are designed to allow for:

• Single element management: fibres may be spliced according to their cable construction

• Single circuit management: the unique and

essential ability to manage fibres in a single circuit fashion

• Single ribbon fibre management

Parameter Single Circuit

Tray SC

Single Element

Tray SE

Single Element

Tray 5SE

Mass Storage

Tray SE

Ribbon

Tray R4/8

Ribbon

Tray R12

Tray Thickness (in UMS units) 1 2 8//5 3 2 3

Maximum number of splices250µm 4 (12) 12 (24) 12 (16)4 24 N/A N/A900µm 2 4 N/A 10 N/A N/AMixed 250/900µm 2 4 N/A 16 N/A N/ARibbon 4 mass splices N/A N/A N/A N/A 2 N/ARibbon 8 mass splices N/A N/A N/A N/A 1 N/ARibbon 12 mass splices N/A N/A N/A N/A N/A 1

Fibre Length Storage (each side of splice)

Minimum: 650mm 650mm 650mm 650mm 650mm 650mm

Maximum:250µm 2050mm 2050mm 1500mm 1500mm 2050mm 2050mm

900µm 1200mm 1500mm N/A 800mm N/A N/AMixed 250/900µm 1500mm 1500mm N/A 800mm N/A N/ARibbon 4 N/A N/A N/A N/A 2050mm N/ARibbon 8 N/A N/A N/A N/A 2050mm N/ARibbon 12 N/A N/A N/A N/A N/A 2050mm

Installed (heat-shrinkable) splice protector dimensions

Minimum ø 2.2mm 2.2mm 2.2mm 2.2mm 3.5mm 3.5mm

Maximum ø 2.8mm 2.8mm 2.8mm 2.8mm 5.0mm 5.0mm

Minimum Length 30mm 45mm 45mm 45mm 35mm 35mm

Maximum Length 45mm 45mm 45mm 45mm 45mm 45mm



Splitter array sub-assemblies are assemblies of trays which store and protect optical splitters whereby

incoming and outgoing fibres are stored on separate organiser trays ready for splicing into the network.

The FIST-SASA3 passive optical devices are factory mounted in a closed black-tray housing. The devices

are delivered mounted on a hinging plate together with the organiser trays that store their incoming and

outgoing fibre tails. The assemblies have a base plate that can be clipped onto the UMS (Universal

Mounting System) profile which is built into the various FIST network products, e.g. splicing shelves (FIST-

GSS2), closures (FIST-GCO2),

Provision for fibre, device and cable element identification is integrated in the design either by labelling or

by using coloured fibres. The splitter components are based on planar waveguide technology. For low split

ratios, FBT (fused biconic tapered) technology is used.

CommScope FIST-SASA3



FIST Work Stand

FIST Mounting Bracket

The work stand to be used in conjunction with all

CommScope FIST products, specifically the GCO2 Closure System.

The MOBRA mounting bracket is the bracket most

commonly used with the GCO2 Closure System

and can be used during jointing as well as for wall

mounting.

FIST AccessoriesA comprehensive list of accessories is available for

the CommScope FIST closure system, including

heat-shrink seal kits, strength member clamps,

fixing brackets etc.

Part Number FIST-MOBRA4-FIX (For 6 port base)

FIST-MOBRA-16-FIX (For 16 port base)

Part Number FIST-WORK-STAND (For 6 port base)



CommScope FOSC SystemFibre-Optic Splice Closures (FOSC™) combine

proven fibre management hardware with a highly reliable sealing system. An important part of a

robust, reliable network, FOSC closures help

ensure that fibre-optic cables are spliced and housed quickly and easily. FOSC closures facilitate

network maintenance and expansion. In addition, FOSC closures help ensure crucial network

fibre connections do not fail in the most severe conditions. Available in a range of sizes, they can

accommodate any cable size or construction and

protect fibre connections in any environment—aerial, pedestal, buried or underground. FOSC

closures combine proven fibre management hardware with a highly reliable sealing system.

Open, easy access fibre management:

• Organiser trays support fast, mass splicing

jobs in feeder and long-haul areas of the

network

• Hinged splice trays for access to any splice

without disturbing fibres in other trays

• Compatible with most common cable types

CommScope FOSC 400FOSC 400 closures combine proven fibre management hardware with a highly reliable sealing

system. Base-to-dome seals on FOSC 400 closures

are mechanical for ease of installation and re-entry

and cable seals feature a unique CommScope heat-

shrink sleeve and hot-melt adhesive system that

is installed with a hot-air gun. Common materials,

accessories and practices are used throughout the

product line to simplify training, reduce inventory and

enhance productivity. FOSC 400 fibre optic splice closures are available in four sizes: FOSC 400 A,

FOSC 400 B, FOSC 400 C and FOSC 400 D, with

multiple styles in some sizes. All sizes are designed

for use with any cable construction (loose buffer

tube, central core tube, loose fibre and ribbon), in any environment (aerial, pedestal, buried, handhole

and manhole) and for numerous splice applications

(express, tap off, branch and repair.)

Features

• Butt splice closures

• Heat-shrink technology

• Hinging trays

• Superior fibre management



CommScope FOSC 450 Gel Drop Seal

CommScope FOSC 500-AA In-Line Closure

The new FOSC 450 gel drop seal solution provides an improved level of

efficiency for adding flat drop fibre cables to a FOSC 450 B, B-Short (BS), C or D sized closure. Utilising compressed gel sealing technology, each gel drop seal

allows for adding up to 4 cables to a cable entry port without the need to open

the existing base and gel block. Drop cables can be added at the initial install or deferred, whichever is preferred, to maximise flexibility and minimize cost.

Features

• Accommodates typical outside plant flat drop style cables (1 to 12 fibres)• For use in all outside plant applications

• Each gel drop seal holds up to 4 flat drop cables• Compressed gel sealing activated by simple tightening

• Rugged housing

• Sturdy cable and strength member retention

• Gel drop seals can be placed to the closure day one or deferred until necessary

• Drop cables are added with little to no impact to any existing drop cables

Closure dimensions in mm

• Length (without mounting parts) 422

• Length (with mounting parts) (L) 472

• Height (H) 65

• Width (W) 125

• Splicing capacity

• Number of splicing trays 1

• Number of splices 48

• Cable ports

• Number of cable ports 2 + 2

• Cable ø range 5-15mm

Features

• Slim, elegant, compact in-line design

• Easy re-entry and re-closure mechanism with

hinge and latches

• 2 cable ports provided at each side of closure

• Cold applied cable sealing based on gel

technology (2 knobs for gel compression)

• Integrated cable jacket gripping devices

• Compatible with most existing cable constructions (loose tube, central core,

slotted core)

• Closure can be used in aerial, pedestal and

underground (up to 5 meters waterhead)

environments

The FOSC-500AA in-line closure is an

environmentally sealed closure for fibre management in the outside plant network. It is a cold applied re-

usable closure housing one mass splicing tray and

cable attachment units. The closure functions equally

well as a customer drop, tap-off or in-line splice

closure in the low fibre count part of the network.



CommScope FOSC 600 Gel Seal

Features

• Butt or inline splice closure

• Gel-seal technology

• Hinging trays

• Large fibre capacity • Superior fibre management • Excellent consolidation or rehabilitation

closure

Other features include:

• Up to 16 separate cable ports

• Sized for cables up to 35mm in diameter and 1728 fibres • Field configurable for butt or in-line splicing • All internal parts can be removed for reconfiguration • Both C and D closures use CommScope’s “D” size splice

trays

• Storage basket included with all closures can be extended in length or repositioned vertically depending on application

• Slack ribbon storage on the same tray as mass fusion

splices is possible with use of a ribbon tray

• Backed by CommScope’s extensive network of technical field support specialists.

The sealing system for FOSC 600 closures builds on the

proven reliability of FOSC 400 and FOSC 450 closures and

features the versatile and popular gel-sealing technology for

terminating cables and a unique latching system for quickly

opening and closing the body.

CommScope Outdoor Fibre Micro-ClosureThe gel sealed in-

line OFMC closure

offers a mechanical

and waterproof

protection (IP 68) for

fibre splices in the FTTH network (aerial,

manholes).

The housing is in two

parts openable by

using 2 long latches.

Cable entries are

easily accessible and allow cable loop through configuration in combination with up to eight-drop cables.

Depending on the configuration, the OFMC can be used as a track joint, a direct cable access or a loop through application. The

central base plate allows cables fixation and protection of the tube loop (micro sheet construction).

A hinge-able splicing tray offers a perfect protection for the storage

of bare fibre, of fibre splices and eventually of a splitter.

Features

• In-line compact closure 250 x 100 x 70mm = 1.75dm3

• Latch closing system

• Sealing made by compressing gel

during closing

• Tool less product Compatible with

RECORDsplice, SMOUV and ANT

splice protectors

• Easy individual drop cable

termination on strain relief device

• Main cable sealing from 6-11mm

• Drop cable sealing from 4-7.5mm

• The closure can be used as well in

aerial, pedestal and underground

(up to 2 meters) environment

• For G657 fibres only



CommScope BUDI Range Overview

Size BUDI-2S BUDI-1S BUDI-S BUDI-M

A: Height box (mm) 260 340 425 480

B: Height cover (mm) 285 420 500 550

C: Width (mm) 155 240 295 360

D: Depth (mm) 60 120 145 175

Wall Mounted Enclosures

WHAT IS BUDI?BUDI is a CommScope product range of compact, wall mountable fibre closures for indoor and outdoor use. They are specifically designed for fast deployment and easy customer connection. The FIST management system is a proven CommScope technology for optimal fibre organisation and splicing.In combination with a patch panel, this system offers ultimate flexibility. Available with splicing and/or patching capabilities, high connector density, small and larger footprints, the BUDI product range offers

flexible solutions for a wide range of applications in the access network.



CommScope BUDI SpliceFeatures

Designed to operate in category C

(controlled), category G (outdoor

ground level) and category A

(aerial) as characterised by IEC

61753-1

• Fire retardant, LSZH

materials

• UV stable material for

outdoor above ground use

• Multiple cable ports

available

• Bottom cable seal blocks

are wraparound

• UMS (Universal Mounting System) available

to mount single element/single circuit trays splice trays

• Compatible with pre-connectorised Mini-

Breakout cable

• Allows integration of passive optical

components

• Small and large footprints

• Multiple accessories available to terminate

and seal different cable types

• Removable enclosure lid

• Quareo Scan Assist compatible

Benefits• Easy to install

• Compact and flexible design

• Fast customer connection

• Extensive product range

• Proven FIST fibre management system

Features Type of BUDI

BUDI-2S BUDI-1S BUDI-S BUDI-M

UMS 6 16 28 36

Splices (single element) (up to 12 splices per tray) 36 96 168 216

Splices (single circuit) (up to 2 splices per tray) 12 32 56 72

Cable loop No Yes Yes Yes

Lock Lead wire Key Key Key

FSASA splitter integration No Yes Yes Yes

Quareo Scan Assist compatibility Yes Yes Yes Yes



CommScope BUDI Connectorised

Benefits • Easy to install

• Compact and flexible design • Fast customer connection

• Extensive product range • Proven FIST fibre management system

Features

• Designed to operate in category C (controlled),

category G (outdoor ground level) and category A

(aerial) as characterised by IEC 61753-1

• Fire retardant, LSZH materials

• UV stable material for outdoor above ground use

• Multiple cable ports available

• Bottom cable seal blocks are wraparound

• UMS (Universal Mounting System) available to

mount single element/single circuit trays splice trays

• Compatible with pre-connectorised MiniBreakout

cable

• Allows integration of passive optical components


• Multiple accessories available to terminate and

seal different cable types



Features Type of BUDI

BUDI-2S-T BUDI-1S-T BUDI-S-T BUDI-M-TP BUDI-M-TA

UMS 2 8 24 24 24

Ports SC 8 16 24 36 48

LC 12 32 48 72 64

Splices Single circuit 12 16 48 48 48

Single element 36 48 144 144 144

Cable loop no yes yes yes yes

Lock lead wire key key key key

FSASA splitter integration no yes yes yes yes

Quareo Scan Assist

compatibility

yes yes yes yes yes



CommScope BUDI Plug and Play

The BUDI Plug-and Play speeds up FTTH

deployments and is therefore especially suited for

PON and point-to-point networks. Available with

splicing and/or patching capabilities, high connector density, small and larger footprints, the BUDI product

range offers flexible solutions for a wide range of applications in the access network.

Benefits • Plug-and-play solution

• Reduced installation time


• Compact and flexible design

• Extensive product range

Features • Designed to operate in category C

(controlled), category G (outdoor

ground level) and category A (aerial) as

characterised by IEC 61753-1

• Fire retardant, LSZH materials

• UV stable material for outdoor above ground

use

• Multiple cable ports available

• Bottom cable seal blocks are wrap-around

• Accommodates SC, LC and other connectors

• Compatible with pre-connectorised Mini-

Breakout cable

• Allows integration of passive optical

components


• Multiple accessories on cable termination

and connectorisation (PON, P2P)

• Can serve as demarcation between

residential and business customers





3M BPEO Evolution Size 1 Splice Closure


3M BPEO Evolution Size 1.5 Splice Closure


Features

• Watertight closure IP68

• Easily re-enterable using standard tools

• No re-entry kit required

• ECAM type cable entries

• Organiser with three management zones

• 12 slot organiser for swivel mounted cassettes

• Fibres supported and managed into each tray

position

• Plugs on all inlet ports and test valves as standard

Applications• FTTH / B Networks• Transportation Networks

• Distribution Networks

• FTTA Networks

Available in three additional different sizes:



CommScope Powered Fibre Cabling System

Passcomm is proud to

introduce Commscope’s

Powered Fibre Cabling System

to the UK.

By utilising a PoE Extender and copper and fibre Hybrid Cabling, PoE distance capability is increased

by up to 30x. This allows you to power and communicate with IP CCTV cameras, IP telephones,

wireless access points, or any connected device up

to 3km away.

When challenged with remote locations, the Powered

Fibre Cabling System is a cost-effective way to

power and communicate with the device in locations

previously out of reach with conventional PoE.

An added benefit is that because the cable is carrying low voltage DC it does not need to be installed by a

qualified electrician.

Powered Fibre Cabling System ReelPasscomm has designed the PFCS Reel for temporary installations, such as

festivals, exhibitions or any events where IP devices are installed. The PFCS Reeled version provides power and connectivity for IP CCTV, Wireless Access

Points and Small Cells up to 3km from power source.

The ‘plug and play’ system also allows users to re-use the system at future

events, making it a cost-effective method for taking power to remote locations.

Simultaneously power and communicate with

network devices. Ideal for Wi-Fi Access Points, HD

CCTV, IP Telephony, ONT’s and small cell devices.

• 30x the distance of PoE

• 1Gb data transfer

• Up to 30 watts power at remote devices

• Eliminate the need for local power sources

• Centrally located UPS

• SELV and NEC Class II compliant



Stainless Steel Closures

Passcomm offers a wide range of

flexible options for Stainless Steel Closures. Assembled on-site at the

Passcomm manufacturing facility

in Warrington, bespoke stainless

steel closures can be pre-drilled,

pre-wired and pre-terminated to

your exact requirements.

Passcomm supplies stainless

steel closures that utilise the FIST

management system used by BT

and approved for use by Network

Rail. This offers ultimate flexibility of both connector type and cable

capacity.

Offering a wide range of sizes,

locking mechanisms, gland plates,

backmount plates, ‘express’ loop-through cabling as well as LC/PC and SC/APC connectorisation, Passcomm is well equipped to

design and manufacture to your

specific brief.

To discuss a specific requirement for Stainless Steel Closures,

please call Passcomm Sales on

01925 821333 today.



Indoor Fibre Distribution BoxIFDB enclosures or floor boxes are points at which to break out fibres from an indoor riser cable into individual drops to the living units of an MDU. These

drops provide a fibre optic connection to the living units.

The IFDB enclosures allow fibres from certain riser cables to be broken out without interrupting the

strength member by making a small window cut,

providing easy handling and fast installation.

IFDB for Connectorised Applications General Features

• IP 30 rating, indoor use only

• Front accessible

• Flame retardant LSZH material

• Compatible with mechanical, SMOUV and ANT

splice protectors

• Not required to cut loop-through fibres from riser cable

• Wrap-around riser cable installation

• Controlled fibre management

• Transient-free customer provisioning

• In-line or butt configurations possible for riser cable

Benefits • Compact & aesthetic design

• Easy to install Compatible with CommScope’s

unique mini-breakout & mini-bundle riser cables


• Highly reliable, low maintenance and easy access

Offer fast deployment and easy customer

connection. The larger IFDB-M floor box offers a clear ‘homes passed’ deployment. The new fibre management system is especially designed for easy

fibre routing and storage. Once all splices are made, connections can be managed by less specialised

installation crews. During the ‘homes connected’

rollout, the customer can easily be connected by

patching connectors to the floor box. The patch panel offers operators ultimate flexibility.

IFDB enclosures are available for

every application: spliced,

connectorised and

plug-and-play.



Stainless Steel Cabinets

Customer Wall Outlet – COWO’s COWO is a fibre optic customer outlet that allows easy and unobtrusive termination of fibre optic cables in an office, home or communications room.

Features

• Accommodates two termination/splice connections

• 2 SC simplex or 1 LC duplex adapters

• 2 crimp, mechanical or heat shrink splices

• IP20 rated

• Very flat design, mounts on a standard flush mount electrical outlet

• Utilizes reduced bend radius fibre (G657.A and B)

• Possibility to invert the adapter in the holder to prevent disconnection when pulling the patch cords

• RoHS compliant

• Conforms to UL 94 V-O

• Lockable with screw or lead-wire seal

• Cable entrance from the bottom, left and rear

• Made of moulded plastic (halogen free, LSZH-1), white (RAL 9010)



Fiber ShelvesAt a Glance

FACT FIST FOMS Splitter Shelf NGF Shelf OMX Modules

Preferred location CO CO POP CO/POP CO CO

Density Per Unit Extremely high High High Medium Medium Medium

Mounting Style 19" / ETSI 15" /19" / ETSI 15" /19" / ETSI 15" /19" / ETSI Proprietary Proprietary

Connector Types SC, LC, E2000 SC, LC, E2000, others LC, SC NA SC, LC SC, LC

Splice / Patch / Splice and Patch

Y/Y/Y Y/Y/Y NA/Y/Y NA/NA/NA Y/ Y/N Y/ Y/N

Splice OptionSingle element/ mass splicing

Single circuit/ single element/ mass splicing

Mass splicing NASingle element/ mass splicing

Single element/ mass splicing

Cable Management ++++ +++ ++ NA NA NA

Patch Cord Management ++++ +++ ++ ++ +++ +++

Internal Overlength Storage

Pre-fibering NA

Pre-cabling NA

Transient Free Fiber /Handling ++++ ++++ + NA +++ ++

Sliding (S) / Pivoting (P) S S P NA NA P

Front (F) / Tray Patching (T) T T F NA F F

Patch Flexibility +++ + +++ NA ++ +++

Optical Module Integration ++++ +++ NA ++++ +++ +++



Optical Distribution FramesCommScope FIST-GPS2/3

Features

• Patching, using patch cords, connectorised breakout or intrafacility cables

• Splicing loose tube cables, non-connectorised intrafacility or breakout cables to pigtails and patching

these pigtails to patch cords

• Supports integration of passive optical splitters and wavelength division multiplexers • Various connector/adapter types possible • Optional jumper over-length storage facility (for 19-inch shelves)

• Full patching capability on the tray and between trays in one shelf

• Use of connectorised cables allows repair of pigtails

• Easy identification of each fibre • Available with various capacities and in different heights (44, 89, 125 and 175mm; please note, 44mm

height is available only for 19-inch shelves)

• Kits available to attach cables at the side or back of shelf

• Wrap-around side panel and pigtail guide for easy re-patching (except in 44mm versions) • Can be installed in CommScope’s FIST racks and other 19-inch or metric (ETSI) rack sizes - FIST-GPS2

mount in ETSI and 19-inch frames - FIST-GPS3 mount in 15-inch frames

• Shelves are shipped with the maximum number of trays already installed

FIST-GPS shelves feature the FIST fibre management system and provide a platform for patching and splicing within a rack environment. The shelves house FIST splice and patch trays (FIST-GPST-12 or FIST-

GPSTF-12). They mount in ETSI (FIST-GR3), 19- or 15-inch (FIST-GR3F) racks. FIST-GPS2 shelves are

used in ETSI and 19-inch frames.

These shelves feature FIST-GPST 19-inch trays with adapter/retainers; trays are staggered for easy fibre routing and access to connectors and are provided in sets of two trays. FIST-GPS3 shelves feature FIST-

GPST 15-inch trays without retainers; trays can be stacked directly on each other. FIST-GPS3 shelves are

used in 15-inch frames.



Benefits of Tray Patching • Clean: Both sides easily accessible for cleaning

adapters

• Safe: Laser light oriented perpendicularly to the

operator

• Accessible: Full front access at both sides of

connection

• Visible: Patch cords do not hamper access or

visibility of ports

• Reconnection to other positions in the same tray

or shelf does not result in uncontrolled over-

lengths

• Bend controls guide and protect the pigtail cable

and ensure controlled cable routing

• Manipulation of patch cords does not cause

transient losses on other circuits

• Secure: Because of their position in the trays,

connectors are better protected than in some

front facing patch shelves

• Shelves are painted (powder-coated) in light grey

(RAL 7035)

• Shelves are always ordered fully loaded

• FIST-GPS2 shelves feature trays with adapters

and retainers

• FIST-GPS3 shelves feature trays with adapters

without retainers

• For a list of accessories, consumables and tools,

please refer to the GPS2/3 accessories ordering guide

CommScope FIST-GPS219”/ETSI rack mounting; mounting brackets for both mounting environments included in kit

Maximum connection capacity

Dimensions in mm Without storage basket

(Standard/small-form factor

connectors and adapters)

With storage basket (Standard/

small-form-factor connectors

and adapters)

Height Width Depth

174 (4HU) 485/535 280 96/192 72/144

125 (3HU) 485/535 280 72/144 48/96

89 (2HU) 485/535 280 48/96 24/48

44 (1HU) 485/535 280 24/48 12/24.

CommScope FIST-GPS315” rack mounting

Maximum connection capacity

Dimensions in mm (Standard/small-form-factor connectors & adapters)

Height Width Depth

174 (4HU) 385 280 96/192

125 (3HU) 385 280 72/144

89 (2HU) 385 280 48/96



CommScope FIST-GPST-12 Tray

The Generic Patch/Splice Tray, FIST-GPST-12 is a mechanical tray assembly for the FIST fibre management system in a rack environment. FIST-GPST-12’s are typically used in conjunction with a FIST

splice and patch shelf (FIST-GPS2).

The unit has the following functions and features:• Patching only, using patch cords, connectorised

break-out or intra-facility cable

• Splicing loose tube cable, non connectorised intra-

facility or break-out cable to pigtails and patching

these pigtails to patch cords

• Splitters can be integrated

• Full patching capability on the tray and between

the trays of one shelf Patching trays are used

instead of front patch panels

Patching trays are used instead of front patch panels• Patch cords are better managed in a horizontal

plane

• Full access at both sides of the connection

• Reconnection to other positions in the same tray

or shelf does not result in uncontrolled over-

lengths

• Various connector adapters possible

• Bend controls guide and protect the pigtail cable

and ensure controlled cable bending

• Empty versions available as well as filled with various types of adapters/retainers and eventually pre-fibred with the conforming pigtails

Dimensions and CapacityDescription Dimensions Maximum Capacity Std.

Connectors

SFF Connectors

Height

mm

Width

mm

Depth

mm

FIST-GPS-12 18 355 190 12 24



Features

• Can be installed in CommScope’s FIST ETSI and

15-inch racks and other 19-inch or metric (ETSI)

rack sizes (both back and front mounting)

• FIST-GSS3 mount in 15-inch frames

• FIST-GSS2 mount in ETSI and 19-inch frames

• Accessories available for termination of most

common cable types e.g. loose tube or other cable

constructions

• UMS (Universal Mounting System) profiles provide foundation for mounting combinations of SOSA2

(Splice Only Sub-Assembly) and/or SASA3/FSASA (Splitter Array Sub Assembly) modules which

consist of modular groove plate and trays

• Termination units for aramid yarn can be mounted

in the shelf to provide necessary strain relief when

terminating common pigtail types

• Design of aramid yarn termination units and trays

prevents transient loss on adjacent pigtails and

fibres during handling of pigtails and fibres

• Factory-installed fibre guiding tubes and bend controls allow for easy, controlled access to fibres and splices

• When shelf is back mounted, wrap-around side

panel and pigtail guide designed for easy addition

of pigtails

• Easy identification of each fibre

Dimensions and Capacities

Dimensions

in mm

FIST-GSS2 (19”) FIST-GSS3

19”/ETSI 15”

Height 125 125

Width 485 385

Depth 280 280

The FIST-GSS2 and FIST-GSS3 multi-purpose splice

shelves feature FIST fibre management system technology. They mount in ETSI (FIST-GR3), 19- or

15-inch (FIST-GR3F) racks.

These shelves store splices for:

• External to external/indoor cable

• External/indoor cable to pigtails

• External/indoor cable to break-out (BOC) or intrafacility cable (IFC)

• Pigtails to pigtails

CommScope FIST-GSS



CapacitySplice capacity cable to

cable:

Trays Number of

splices

Trays Number of

splices

FIST-SOSA2-BSC (2F/4F) 48 96/192 36 72/144

FIST-SOSA2-4SE (12F) 24 288 18 216

Number of tubes in / maximum number of fibres per tube

16 (3.1mm)/24 16 (3.1mm)/24

Number of tubes out / maximum number of fibres per tube

16 (3.1mm)/24 16 (3.1mm)/24

Splice capacity cable to

single pigtail

Trays Number of

splices

Trays Number of

splices

FIST-SOSA2-BSC (2F/4F) 48 96/192 36 72/144

FIST-SOSA2-4SE (12F) 24 192 18 144

Number of tubes in 24 (3.1mm) 24 (3.1)mm

Number of single pigtails

out (1.8 or 2.4mm)

Total pigtails

out

Space in shelf

for maximum 12

FIST-SPTK2

Total pigtails

out

Space in shelf

for maximum 9

FIST-SPTK2 kits

12 x 16 pigtails 16 pigtails per

FIST-SPTK2-16

9 x 64 pigtails - 144

16 pigtails per

FIST-SPTK2-16

Splice capacity cable to

IFC/BOC

Trays Number of

splices

Trays Number of

splices

FIST-SOSA2-BSC (2F/4F) 48 96/192 36 72/144

FIST-SOSA2-4SE (12F) 24 288 18

FIST-SOSA2-5SE (12F) 30 360

Number of tubes in 24 (3.1mm) 24 (3.1mm)

Number of 24-fibre IFC out (maximum diameter 8.5mm

without strength member)

Total IFC-24

cables out

Space in shelf

for maximum 12

FIST-SPTK3 kits

Total IFC-24

cables out

Space in shelf

for maximum 9

FIST-SPTK3 kits

12x24 IFC = 288 fibres

12xFIST-SPTK3 for IFC-24

9x24=216 9xFIST-SPTK3 for 9 IFC-24

15x24 IFC 360 fibres

15xIFC-24 per FIST-ITK2

10x24=240 10xIFC-24 per FIST-ITK3



CommScope FACT ODFThe FACT ODF system enables faster and easier installation

in a high-density environment. The tool-less system and the

high level of modularity guarantee easy migration towards

new connectivity platforms and expansion of existing central office sites.FACT modules support full patch and/or splice-patch functions within a rack environment. Trays within the element

can be configured with adapters, splicing and passive optical components. Trays are staggered for easy fibre routing and access to connectors. Currently available, the FACT standard version integrates into a current partially or

non-equipped FIST-GR2/3 frame or lineup.

Cable Fibre

Count

SC connectors/adapters LC connectors/adapters

24 SC connectors per element¹ 48 LC connectors per element²

Number of FCEs Height Units Number of FCEs Height Units

24 1 Fits 1HU 1 Fits 1HU






288 6 Fits 5HU

Intuitive installation• Simple access to connectors by full front

accessibility of trays

• Tool-less installation of FACT modules into rack

• Easy-to-install cable termination unit

• Lightweight

Unparalleled modularity• Upgradeable FACT elements to create modules

• Follows modularity of active equipment line cards

and at the same time follows trends of fibre count of feeder cables

• Adaptable to new connector technologies with low

investment

• Fits typical telecom CO layouts (19-inch/ETSI racks, 300mm deep)

High-density footprint• Standard connectivity (LC-single adapters)

30 percent higher density, up to 2688, in a

900mm x 300mm rack setup• Ultra high density; up to 4032 connections for

adapter pack & 1.2mm patch cord technology in

a 900mm x 300mm rack set up• Non-moving fibre principle during tray

manipulations

• Pre-cabled solutions for FACT modules

• Fits typical telecom CO layouts (ETSI racks,

300mm deep)



19” High Density Front Patching/Splicing ShelfDesigned for fibre management in a rack environment, the FOMS-FPS-HD is a high density

multi-purpose mechanical shelf with front patching

and optional single element splicing. The compact

design makes it possible to handle a large amount

of fibres in a small footprint. FOMS-FPS-HD delivers carrier-class fibre management to central offices and points-of-presence, as well as FTTH, mobile and

local area networks.

Two versions are available

• Patching only

• Splicing and patching to terminate loose tube,

central core, IFC (intrafacility cable) and break-out

cables

Shelf DimensionsMeasurements 19” Chassis

Standard 1HU

Version

2HU Version

Width (with/without

mounting

brackets)

481 / 444mm 481 / 444mm

Height 44mm 88mm

HU-Height

Units

(requires 1x19” HU)

(requires

2x19” HU)

Depth 280mm 280mm

Note: A HU is a “height unit”. Refer to rack

documentation for more details.

Shelf CapacityDescription FOMS-FPS-HD

Splice & Patch

Patch Only

Number of

FOSC A splicing

trays

2 or 4 for 1HU

4 or 8 for 2HU

NA(b)

FOSC A splicing

tray capacity

12 or 24 NA

Incoming cable 2 NA

Patch panel

capacity

(1HU / 2HU)

48/96 48/96

Patch cord

length inside the

shelf - from the

trumpet til the

back side of the

patch panel (a)

N/A 0.50 - 0.90m

Patch cord

length inside the

shelf - from the

trumpet til the

back side of the

patch panel (b)

0.06 - 0-40m 0.06 - 0-40m



FIST-ETSI RACKS

Flexibility• Compatible with CommScope’s FIST-GR2 racks

• Accepts CommScope‘s FIST-GSS2/GPS2 and FIST-GSS3/GPS3 shelves

• Depth and width in accordance with ETSI

• ETSI mounting profiles with cage nuts for shelf mounting provided at rear of the rack for optimal

access from the front

• Optional units allow horizontal and vertical patch

cord management and storage of excess patch cord overlength

• Bend control on all fibre routing

All-Purpose rack• Structured division and distribution of cable elements

• Wide variety of optional accessories

• Cable attachment plates incorporated into

side duct

• Easy access to cables, pigtails and jumpers

during installation, maintenance and upgrade

• Easy adaptation to specific applications by changing rack or shelf configuration, as well as routings of pigtails and jumpers

• Various mounting options

• Wall mounting, stand-alone or multiple side-

to-side mounting (optional kit)

• Back-to-back mounting

• Various rack options to suit all application requirements

• Different side ducts (150, 300mm) with drums

for proper fibre management• Different doors

• Front mounting options

• Depth extension kits• Overlength storage bays

Dimensions (mm) and CapacityDescription Dimensions Capacity

H W D Height Units (ETSI) Number of FIST/FOMS Shelves

FIST-GR3(F)-

R-X-18

1800 - 300 64-8=56 11 (3 Hus = 125mm = 5 ETSI Hus)

16 (2 Hus = 88mm - 4 ETSI Hus)

28 (1 HU = 44mm = 2 ETSI Hus)

FIST-GR3(F)-

R-X-22

2200 - 300 80-8=72 14 (3 Hus = 125mm = 5 ETSI Hus)

20 (2 Hus = 88mm = 4 ETSI Hus)

36 (1 HU = 44mm = 2 ETSI Hus)

All-purpose, easy-to-assemble FIST-GR3 and

FIST-GR3F racks accommodate the FIST fibre management system in a central office, head-end or customer premises environment.

Several versions of the rack are available:One series based on the ETSI standard (600 mm

wide); and one on the 15-inch standard (450 mm

wide). With the addition of side ducts, total width

of the rack framework varies between 600 and

1200mm. Rack heights of 1.8 or 2.2 meters are

available. All versions feature flexible shelf spacing and accept a range of accessories such as panels

and doors to complete the installation.

Both racks house connector panels and separate

shelves for splicing, patching, equipment and

devices. The racks allow superior management and

storage of pigtail and patch cord overlengths.

FeaturesEasy handling• Compact, efficient packaging means less waste• Easy to transport, store, handle and install due to

compact design

• Universal installation manual (drawings, no words)

• Assembly requires only simple tools allowing faster

installations than standard racks



The FIST-GMS2 features

the FIST fibre management system and is a multi-purpose

mechanical shelf assembly

used to store splices of

external/indoor cable to pigtails. These shelves

combine splice, storage and patching functions. The

shelf accommodates a patch panel containing 24

standard or 48 small-form factor connections.

• Installs in ETSI (FIST-GR3) or 19-inch racks

• Accessories available for termination of most

common cable types

• UMS (Universal Mounting System) profiles provide foundation for mounting combinations of SOSA2

(Splice Only Sub-Assembly) and/or SASA3/FSASA (Splitter Array Sub Assembly) modules which

consist of modular groove plate and trays

• 24-position panel

• Supports a mix of connector/adapters (up to 24 SC or 48 LC) and termination units for aramid

yarn (up to 96 fibres)• Termination units provide necessary strain relief

when terminating common pigtail types

• Factory-installed fibre guiding tubes and bend controls allow easy, controlled access to fibres and splices

Features• Slim footprint: 300mm wide, 300mm deep

• Modular concept: basic rack that accepts up

to 4 modules for the splicing and patching

function

• Up to 144 fibres can be terminated to push-pull connectors having splices organised in

a single circuit way. The capacity is limited to

96 terminations for other connector types

• Cable attachment provision and patchcord

management system included in the rack

• Cable entrance and patchcord outlet

possible both in the top or both in the bottom

of the rack

• Bend control on all fibre routing• Transparent acrylic door

FIST-Small ODF

FIST-GMS2 Mixed Splice/Patch Shelf

FIST-SODF2 is a metal rack designed

to serve as small optical distribution

frame in an exchange, head end or customer premises environment.

The small ODF accommodates FIST

modules that provide the functions of

splicing and patching.

Description Dimensions in

mm

Capacity

H W D

FIST-SODF2 2200 300 300 4 modules

The rack is painted (powder coated) in light grey

(RAL-7035)

19” Closure dimensions in mm

Height 125

Width 485

Depth 280

Storage capacity

Pigtail (900 µ) length in shelf 2 metres

Patch cord length (from trumpet

to patch panel)

0.8 to 1.0 metre

Splicing cable to 900 µ pigtails

using connector/adapters

Fibres Trays

Single circuit splicing (2 fibres per tray / 4 fibres per tray)

24/48 12


(12 fibres per tray)24/48 2/4

Splicing cable to 1.8mm

pigtails µ sing termination

units for aramid yarn

Fibres Trays

Single circuit splicing (2 fibres per tray / 4 fibres per tray)

48/96 24


(12 fibres per tray)48/96 4/8

Dimensions and Rack Capacity




FOMS-FPS Front Patching/Splicing ShelfThe front patching/splicing shelf, FOMS-FPS, is a multi-purpose mechanical shelf

assembly for a fibre management system in a rack environment. Its compact design and

high-density capacity allow the FOMS-FPS

to deliver carrier-class fibre management to central offices, POPs, FTTx, mobile systems and LANs.

Two versions are available:• Patching only

• Patching & splicing to terminate loose tube, central core, IFC and ribbon cables

Features• 19” size: suitable for any 19” electronic equipment rack (also compatible with ETSI, 23” or

• CommScope GR2 and UR using adaptation brackets)

• Accommodates up to 24 standard or 48 small form factor connectors on the shelf front. Different

connector types can be mixed in the same shelf• Pivoting tray allows easy access to the interior of the shelf, even when equipment jumpers have been

installed. FOMS-FPS Front patching/splicing shelf• Angled connector patch panel reduces the risk of eye damage and ensures a positive fibre management

for the equipment jumpers

• Restricted depth guarantees optimum access to the back for cable termination

• An optional transparent cover will protect the equipment jumpers if open frames without front doors are

used

• Repair facility when terminating IFC cable

• Mounting brackets can be installed at the front or back of the shelf

• Trumpet to protect the incoming pigtails at the side or the back of the shelf

• Proven FOSC tray splicing concept ensures bend radius protection and solutions for all types of fibres and splice protectors (SMOUV-ANT)

• Shelf can be delivered with pigtails and connector adapters in the kit

• Shelves with integrated passive components (splitters, WDMs) available on request

19”

Dimensions (mm) Splicing cable to pigtails

Height 44 Number of splicing trays 2

Width 481 Number of connectors 24

Depth (incl. cover) 280 Number of SFF connectors 48

Depth 220




Swing Frame Patch Panels Passcomm offers a huge range of both multimode

and singlemode 19” patch panels in 1U with the full

range of connector types:

• FC/PC• SC/PC• ST

• MU

• LC

• FC/APC• SC/APC• MT-RJ

All panels can be supplied with pigtails, adapters,

splice bridges, splice protectors, entry glands and

cage nuts.

Pigtail ClampsCable ManifoldsPasscomm manufactures custom cable manifolds

for stranded loose tube fibre cables to protect cable elements and simplify cable management within

racks and enclosures.

Pigtail clamps are designed to enable a ruggedised

pigtail to be attached securely to a bulkhead in

either an FC/PC ‘D’ hole or SC/PC form.



Fibre AccessoriesHeatshrink Cable Glands CommScope Heat-

Shrinkable Cable Entry

Seals (CES) provide a

watertight, fume-tight

seal where cables enter

connection boxes, bulkheads or other

enclosures

For the full range of CommScope Heatshrink Cable

Glands, please see the Copper Products Section of

the catalogue

Part No Min

expanded

ID mm

Max

recovered

ID mm

Hole

Size

ACC-HG-CES-1 12.7 4.5 25

ACC-HG-CES-2 19 6.3 25

ACC-HG-CES-3 28 12.7 35

ACC-HG-CES-4 41 19 50

ACC-HG-CES-5 70 36 89

This kit contains the necessary tools to enable most

optical fibre telecoms cables to be prepared for jointing and terminating.

Kit Contents:

• Canvas Tool Bag

• Longitudinal Cable Stripper

• Junior Hacksaw (150mm)

• Circumferential Cutter

• Industrial Cleaning Cloths (150 per box)

• Adjustable Wrench (250mm – 30mm)

• Fibre Strippers

• Knipex 125mm Side Cutters (Flush)

• Rotary Fibre Tube Cutter

• Central Strength Member Cutter

• Lockable Solvent Dispenser

• 250ml Sharps Bin

• Tape Measure

• Tool Carrier

*For Copper Cable Prep Kit see Copper Products

Section

Part Number KIT-CCK-01 Part Number KIT-CPK-F-01

Fibre Cable Preparation Kit

Connector Cleaning Kit Small kit for the cleaning of fibre connectors containing the

following:

• Solvent

Dispenser

• Aero Duster

• Lint Free

Cloths

• Lint Free

Cleaning

Sticks

• Carry Pouch



Part Number TES-CCR-01 (single slot)

TES-CCR-02 (double slot)

TES-CCR-200 (disposable)

Lint Free ClothsPacket of 100 lint free cloths

100mm x 100mm.

Cleaning Reel

Fibre Cleaning and Preparation Kit• Fibre Stripper – Primary Coating

• Lint Free Cloth (4” x 4”) – 100pk• Fibre Preparation Fluid 3oz

• Kabifix FK28 Cable Sheath Stripper 6/28mm• Aramid Yarn scissors

• Rotary Tube Cutter, 3.1mm tube diameter

• Canvas Carry Case

Fibre Bend Limiting Tube (FBLT)Fibre Bend Limiting Tube (FBLT)

gives the highest possible

protection against crushing and

kinking of fibres and perilous tensile loads; whilst ensuring

fibre bends are limited to an acceptable radius. Ideal for

routing fibre in racks and cable nodes, or for making

rugged patch cords in tough

workplace environments. Available in

white, coloured and V0 versions. 5mm and 3mm OD.

FBLT is also available in a retro-fit split version.

Part Number KIT-CPK-F-03

Part Number COS-LFT-4/8

Part Number COS-LFC-4/4

Part Number TES-CCR-RR

Part NumberFBLT-3/14-BK – 3mm black

FBLT-5/31 5mm whiteFBLT-S-5/31 5mm white split

Lint Free TissuesPacket of 280 lint free tissues

Replacement reels available, please call Passcomm

Sales on 01925 821333.

Connector cleaning reel for optical fibre connectors.

High Performance Fibre Optics


Section 2High Performance Fibre Optics

Contents

Connectors

Pre-assembled Cabling

Active Modules

Intelligent Components



DIAMOND is a worldwide leader in supplying high

precision fibre optic solutions and has been serving successfully several markets for over 30 years.

Diamond is known as a dynamic and innovative

company, able to develop reliable, customized

components and equipment, in response to

increasingly demanding customer requirements.

Manufactured in Losone, Switzerland, Diamond

products are known to offer the ultimate in ultra-low

loss. This reputation and product set means that

Diamond products are used in critical applications

in the Telecoms/Photonics/Military/Space/Avionics/Medical markets across the world.

E2000 – The ideal plug for your network infrastructureA high level of demand is placed on modern fibre-optic connections. They have to work at all times,

under various challenging circumstances and in

different fields of application, which, in the long term, is only possible if high quality, well-thought out and

tested connectors are used.

The Diamond E-2000

• High quality material = durability

• Safety covers on connectors and mating adapters

• Excellent optical parameters, 0.1dB• On-site assembly is possible

• IP65 protection

• Push-pull locking

• No corrosion

• Excellent vibration resistance• Connectors can be sealed

Available as:

• E-2000 Simplex • E-2000 Compact

• E-2000 Duplex • E-2000 Backplane

• E-2000 PS Simplex • E-2000 PS Backplane

• E-2000 Interlock

HE-2000 ConnectorThe new push-pull

four-channel

HE-2000

connector,

which includes

the DM insert,

has the following

features:

• Automatic protection shutter on connector (manual

on bulkhead)

• Harsh-environment plastic shell, made from nylon

with 25% fibre-glass reinforcement• IP67

• Easy front-face ferrule access for cleaning and

inspection

• Push-pull mechanism for easy handling

• Mechanical and colour-coding upon request

• Electrical pins 20 AWG

• Available on cable reels up to 500 metres in length

F-3000 Simplex ConnectorThe F-3000™ is a small form factor fibre optic connector based onto 1.25 mm ferrule style.

Diamond’s F-3000™ connector is designed according

to IEC 61 754-28 international standard and therefore

fully LC standard compatible.

Standard, modular designed F-3000™ simplex mating adapter with interchangeable modular

mounting brackets*.(Special brackets upon request)

The innovative design permits dense packing and

offers: - several installation solutions - spring-loaded

metal protection shutters - high precision alignment

sleeve (zirconia)

Available as:

• F-3000 Simplex • F-3000 Duplex• F-3000 Backplane

• F-3000 PS Simplex• F-3000 r and rs



Fan-Out and Break-Out

Client specific cable lengths

• For MM 50 µm, MM 62.5 µm and SM 9 µum

• Connector types: E-2000, F-3000, FC, SC, ST,

MT-RJ, etc

• Feed-in protection for Fan-Out

• Colour-coded fibre labelling• Stable fibre divider made from metal (fan-out)• Supplied as a ring or on a roll

• Delivery incl. test report

Dia-Flex – Flexible multi-fibre Fan-Out connectorThe DiaFlex connection

provides

increased

flexibility when installing and linking up fibre-optic networks. Cable ends can be replaced flexibly, quickly and without spending a great deal of time or money.

This connection method grants the user a large

application range, with both 12 and 24 fibres. Thanks to the feed-in cap, which has a small design

(ø20mm) pre-assembled cables can be directly

inserted into a pipe or cable duct without the need

for any complicated splicing work.

• Connector flexibility – fibre whips can be replaced as necessary

• Cables can be extended as necessary• A greater degree of flexibility in cable entry due to

the small diameter (ø20mm)

• Short replacement times thanks to pre-assembled

cable whips

• Extremely easy to use on-site

Industrial Gigabit SwitchThe DIAMOND Industrial Switch line includes a

6 – and a 10- port Ethernet

modules. The high

performing redundant

Ethernet ring capability

(commutation time

<20 ms) provide the

necessary reserve

for time and volume

critical applications

as well as increasing

data traffic. The rugged structure design makes this

product suitable for particularly

demanding use in industrial environment. The

35mm DIN-Rails snap fitting allows quick and simple mounting in wall distributors and panels

without need of particular tooling.

The Switches offers the following functions:

2 Fast Ethernet/Gigabit optical fibre connections 100BaseFX/1000BaseSX allowing the implementation of a fault-tolerant optical fibre ring and chain linking several industrial switches. Large

distances can be convenient realized.

4 - 7 Port 10/100BaseTX connections for Ethernet terminals like machine and control systems,

consoles or further network user and 1 Port

10/100/1000BaseT for uplink connection.

Pre-Assembled Cabling

Active Modules



MAT/MARMAT active

device transmitter

modules permit

the direct

coupling

of signals

into fibres terminated with

E-2000™ connectors.

MAR receivers perform the

reverse receiving function.

Both types are carefully designed to offer a high

degree of optical stability over widely-varying

environmental and mechanical-stress conditions.

Rugged construction ensures stable, repeatable

operation over 1000 mate/demate cycles. MAT and MAR incorporate the following features: positive

latching mechanism, spring-loaded shutters for eye-

safety and compact footprint.

F-3000 SFP ModuleThe DIAMOND flexos SFP modules (transceivers)

allow direct

connection to

active components,

such as switches,

converters, routers etc. which have SFP ports with

a transmission speed of 100Mbit/s respectively 1 Gbits, according to standard IEEE802.3 The main

advantage of these transceivers is the flexibility with which they can be used, according to the application

field; where parameters like the transmission speed and the applied fibre type (MM & SM) don’t represent unsolvable obstacles.

Features and Benefits:• Compatible with F-3000™

and LC connector styles

• Plug and Play

• Hot Swappable

• Singlemode or

Multimode versions with appropriate marking

• Metal Package with release latching mechanism

SFP-BIDI-(WDM)-MODUL

The SFP Bidi WDM modules (transceivers) allow

direct connection to active components, such as

switches, converters, routers etc. which have SFP

ports with a transmission speed of 1 Gbits, according

to standard IEEE802.3 The main advantage of these

transceivers is the flexibility with which they can be used, according to the application field.

Features:

• Bi-directional Fibre SFP modules

• 3km on 9/125micron single-mode fibre

• Compatible with F-3000s and LC connector types

• Tx=1310nm Rx=1550nm / Tx=1550nm Rx=1310nm

• Hot swappable



OLID AdaptersDIAMOND plug-in OLiD

Adapters are components

based on FBG (Fibre

Bragg Grating)

technology and

are suitable for line

testing within fibre optic P2P networks. These can be plugged in

both in the Central Office or in the OTO (Optical Termination Outlet). The Optical Line Identification (OLiD) adapters allow fibre-optics lines to be clearly identified thanks to an FBG code written directly into the fibre and do not interfere with standard telecom P2P bandwidths.

OLID Outlets

DIAMOND OLiD outlets are products that include

OLiD pigtails based on FBG (Fibre Bragg Grating)

technology and are suitable for permanent installation

in fibre optic P2P networks.

OLiD pigtails allow clear Optical Line Identification thanks to an FBG code directly written into the fibre and does not interfere with standard P2P telecom

wavelengths. In a P2P network installation, this

technology is used to identify each fibre line and manage the OLiD information through a database

owned by the network operator. The OLiD can

also be remotely read using the Diamond OLiD

interrogator.

Intelligent ComponentsDiamond OLiD intelligent components are all based on FBG (Fibre Bragg Grating) technology and are suitable

for fibre optic line testing before its activation or to be permanently integrated into an existing P2P network. These can be installed both on the central office and onto the OTO (Optical Termination Outlet) and allow a fast and clear Optical Line Identification to avoid installation errors as well as for easy trouble shooting.

OLID AssembliesDIAMOND OLiD pigtails

and patchords are

products that

include FBG

(Fibre Bragg

Grating)

technology and are

suitable for permanent

integration into fibre optic P2P networks. These can be installed anywhere along a fibre optic line, typically in the central office or in the OTO (Optical Termination Outlet).

OLiD assemblies allow clear Optical Line

Identification thanks to an FBG code directly written into the fibre and does not interfere with standard P2P telecom wavelengths.

In a P2P network installation, this technology is

used to identify each fibre line and manage the OLiD information through a database owned by the

network operator. The OLiD can also be remotely

read using the Diamond OLiD interrogator.



An independent provider of broadband services

had identified a cluster of business customers who required the latest broadband connectivity. However,

the distance from the nearest exchange to the industrial estate on which they were located was

too far away to be connected using conventional

fibre optic connectivity. Utilising the latest DiaReach solution these businesses have been successfully

connected and are enjoying affordable, ultra-fast

and ultra-reliable broadband services.

Fibre optic GPON (Gigabit Passive Optical Network)

technology provides an ideal balance of affordability

and performance to deliver broadband services.

Due to the operating wavelengths used by GPON

equipment, once the optical power budget has

been exceeded due to the length of fibre optic cable, number of optical connectors and equipment

degradation over time, the optical signal cannot be

affordably amplified or re-generated. These factors ultimately limit the distance which can be reached

between the exchange and the end customer.

The GPON network was to be configured using a 64-way split and three connector pairs. Two pairs

were to be located at the exchange for the input and output connections to the fibre optic splitter and one pair at the wall outlet in the customer

premises. Based on the use of the highest power

C+ interfaces, a 30.5dB EoL (End of Life) power

budget was available from the active equipment.

Using low loss fibre optic cable, splitter and SC/APC connectors the maximum distance that could be reached was 23km. Unfortunately, this was 5km too

short for the industrial estate to be reached.

Following extended laboratory trials, it was decided to utilise the latest “loss less” fibre optic connectivity from Diamond which uses actively aligned Titanium

technology as part of the DiaReach solution. To

ensure an efficient operational model, the SC/APC style of interface was retained by using the Diamond

Titanium ULL (Ultra Low Loss) SC/APC connectors and adapters. The result was an increase in range of

2.3km per connector pair, translating to an increased

reach of 6.9km. The initial “problem” industrial estate

was comfortably connected with an additional three

industrial estates now also within reach, 30km from

the PoP.

The DiaReach solution includes all industry standard

connector styles and can be used in environmentally

uncontrolled applications which are exposed to wide temperature fluctuations, significant shock/vibration and at risk of contamination through the use

of shuttered connector types such as E-2000 and

F-3000.

DiaReach enables remote broadband connections

For more details on GPON products, please see section 6

Copper Termination and Jointing Products


Section 3Copper Termination and Jointing Products

Contents

Heatshrink Closures

Mechanical Closures

Connectors

Connection Boxes

MDF’s

Duct Sealing

Cable Accessories

Op t i c a l F i b r e P r o d u c t s a n d A c c e s s o r i e sCopper Termination and Jointing Products


Copper Closures at a GlanceFrom Feeder to Drop


Exchange

Office/Apartment

Main Distribution

Frame

Cross-Connect Cabinet

Cross-Connect CabinetAerial Butt

Closure

Aerial Closure

Aerial Distribution

Point

Pedestal Block

Underground DP

Building Entrance Terminal

Cable Block

Pressurized Closure

Cable Block

Cable Block Distribution Joint

Pressure Access

Duct Seal

NIDRJ11

NID NID NID



CommScope XAGA Range OverviewThe CommScope XAGA® splice closure system

provides a fast, simple way to seal telephone

cable splices in pressurised or non-pressurised

telephone cable. The XAGA splice closure is used

for aerial, buried and underground applications on

polyethylene or lead sheathed cable in sizes up to

3600 pairs. The XAGA splice closure sleeve is made

of SuperSleeve sealing material, which combines

the strength and durability of composite design

with proven heat-shrink technology. SuperSleeve

sealing material is composed of several layers of

specially blended polymers, adhesives and fibre-reinforcing layer. The fibre-reinforcing layer provides excellent mechanical strength and eliminates the

propagation of localised damage that can result

from overheating or other errors in installation.

Once the XAGA closure sleeve has been installed,

the composite design of the SuperSleeve sealing

material provides superior mechanical protection

from forces such as impact, abrasion, UV light and

atmospheric contamination.

Features:

• Underground splice used on pressurised and

non-pressurised cable

• Re-enterable

• No cable bleed down required

• Use on aerial, buried or underground applications

• Simple and easy to install

• Provides excellent mechanical strength

Heat-shrinkable composite joint closure system for

environmental and mechanical protection of joints

in the unpressurised telephone network: aerial,

buried or ducted, non-filled or jelly filledcables with polyethylene, lead, steel or aluminium sheaths

• Composite structure of the reinforced

Rayfort sleeve offers an excellent resistance to mechanical abuse during and after the

installation

• Integrated moisture barrier completely

reconstitutes the cable sheath over the total

splice area

• Hotmelt adhesive forms a watertight seal to the

cable sheath

• Supporting liner insulates, shapes and compacts

the splice bundle

• Up to 3 cables at each end can be

accommodated using three finger clips with hotmelt adhesive

• Installation indication: heat sensitive paint and

adhesive flow, white line• Extended size range can accommodate splices

up to 800 pairs

• Unlimited shelf life

XAGA 500 - Joint Closure System for Unpressurised Copper Telephone Networks

Part Number Max.

Bundle

Size

(mm)

Min.

Sheath

Dia.

(mm)

Sheath

Opening

(mm)

XAGA-500-43/8-150 43 8 150

XAGA-500-43/8-300 43 8 300

XAGA-500-55/12-150 55 12 150

XAGA-500-55/12-300 55 12 300

XAGA-500-75/15-240 75 15 240

XAGA-500-75/15-300 75 15 300

XAGA-500-75/15-400 75 15 400

XAGA-500-100/25-460 100 25 460

XAGA-500-100/25-500 100 25 500

XAGA-500-125/30-265 125 30 265

XAGA-500-125/30-460 125 30 460



Heat-shrinkable composite joint closure system

for environmental and mechanical protection of

joints in the unpressurised telephone network:

aerial, buried or ducted, non-filled or jelly filled, with polyethylene, lead, steel or aluminium

sheaths.

Composite structure of the reinforced

Rayfort sleeve offers an excellent resistance to mechanical abuse during and after the

installation.

• Integrated moisture barrier completely

reconstitutes the cable sheath over the

total splice area

• Hotmelt adhesive forms a watertight seal

to the cable sheath

• A metal canister shapes and

mechanically protects the splice bundle

• Up to 3 cables at each end can be

accommodated using three finger clips with hotmelt adhesive

• Installation indicators: heat sensitive

paint and adhesive flow, white line

• Extended size range can accommodate splices up to 3600 pair with any

connector type


XAGA 550 – Joint Closure System for Unpressurised Copper Telephone Networks

Part Number Max.

Bundle

Size

(mm)

Min.

Sheath

Dia.

(mm)

Sheath

Opening

(mm)

XAGA-550-43/8-200 43 8 200

XAGA-550-43/8-350 43 8 350

XAGA-550-43/8-500 43 8 500

XAGA-550-75/12-500 75 15 250

XAGA-550-75/15-350 75 15 350

XAGA-550-75/15-500 75 15 500

XAGA-550-75/15-650 75 15 650

XAGA-550-92/25-300 92 25 300

XAGA-550-92/25-500 92 25 500

XAGA-550-92/25-650 92 25 650

XAGA-550-122/30-300 122 30 300

XAGA-550-122/30-500 122 30 500

XAGA-550-122/30-650 122 30 650

XAGA-550-122/30-900 122 30 900

XAGA-550-160/42-500 160 42 500

XAGA-550-160/42-650 160 42 650

XAGA-550-160/42-720 160 42 720

XAGA-550-160/42-900 160 42 900

XAGA-550-200/50-500 200 50 500

XAGA-550-200/50-650 200 50 650

XAGA-550-200/50-720 200 50 720

XAGA-550-200/50-900 200 50 900



High performance heat-shrinkable closure for

pressurised applications

• Suitable for aerial, buried and ducted

applications

• Composite material provides high

mechanical strength

• Range of closures to suit all cable sizes

• Applicable for polyethylene and metal

jacketed cables

• Pre-installed valve for pressure access

and measuring

• Suitable for use with all standard

connector systems

• Up to 4 cables out at each end

• Wraparound closure suitable for both

maintenance and new construction

• Interchangeable air valve/connector

• Hotmelt adhesive designed specifically for pressurised closure applications

XAGA 1000 – Joint Closure System for Pressurised Copper Telephone Networks

Part Number Max.

Bundle

Size

(mm)

Min.

Sheath

Dia.

(mm)

Sheath

Opening

(mm)

XAGA-1000-45/8-350 45 8 350

XAGA-1000-62/15-250 62 15 250

XAGA-1000-62/15-350 62 15 350

XAGA-1000-62/15-500 62 15 500

XAGA-1000-62/15-650 62 15 650

XAGA-1000-92/30-300 92 30 300

XAGA-1000-92/30-350 92 30 350

XAGA-1000-92/30-500 92 30 500

XAGA-1000-92/30-650 92 30 650

XAGA-1000-122/38-300 122 38 300

XAGA-1000-122/38-500 122 38 500

XAGA-1000-122/38-650 122 38 650

XAGA-1000-122/38-900 122 38 900

XAGA-1000-160/55-300 160 55 300

XAGA-1000-160/55-500 160 55 500

XAGA-1000-160/55-650 160 55 650

XAGA-1000-160/55-720 160 55 720

XAGA-1000-160/55-900 160 55 900

XAGA-1000-200/65-500 200 65 500

XAGA-1000-200/65-720 200 65 720

XAGA-1000-200/65-900 200 65 900

Part Number Max.

Bundle

Size

(mm)

Min.

Sheath

Dia.

(mm)

Sheath

Opening

(mm)

XAGA-550-43/8-200 43 8 200

XAGA-550-43/8-350 43 8 350

XAGA-550-43/8-500 43 8 500

XAGA-550-75/12-500 75 15 250

XAGA-550-75/15-350 75 15 350

XAGA-550-75/15-500 75 15 500

XAGA-550-75/15-650 75 15 650

XAGA-550-92/25-300 92 25 300

XAGA-550-92/25-500 92 25 500

XAGA-550-92/25-650 92 25 650

XAGA-550-122/30-300 122 30 300

XAGA-550-122/30-500 122 30 500

XAGA-550-122/30-650 122 30 650

XAGA-550-122/30-900 122 30 900

XAGA-550-160/42-500 160 42 500

XAGA-550-160/42-650 160 42 650

XAGA-550-160/42-720 160 42 720

XAGA-550-160/42-900 160 42 900

XAGA-550-200/50-500 200 50 500

XAGA-550-200/50-650 200 50 650

XAGA-550-200/50-720 200 50 720

XAGA-550-200/50-900 200 50 900



Part Number MJC-10/20PR-CE or INLMJC-50/100PR-CE or INL

Watertight splice closure for aerial, underground

and direct buried splices in the unpressurised

copper telecommunication network

• Robust construction with high mechanical

strength

• Proven gel sealing system:

• Easy to handle at all temperatures,

• Easy to re-enter

• Innovative cable fixation system• No special tools needed for installations or

re-entry

• Closure uses over-centring ‘ski boot’ type latches

• Flexible branching plug system allowing installation of cables from 5pair 0.5mm to 100pair

0.5mm

• Integrated mounting brackets for aerial and wall

installation

• Reduced inventory as fewer size closures

needed to cover a wide range of applications up

to 100 pairs

• Both dome-ended and in-line closures are

available

• Cable configuration changes possible with a minimum of extra accessories

• No shelf life.

MJC – Mechanical Joint Closure

Pedcap Dome Ended Closure• The Pedcap butt closure is a general purpose

product designed for a variety of applications in

distribution networks

• One piece end cap with heat-shrinkable outlet for

sealing onto the cables

GelsnapThe GELSNAP closures are a range of cold-applied

products for the protection of telecommunications

joints up to 30 pairs. They consist of two moulded

parts, each filled with a customised gel material. The two halves sandwich the splice.

• 3 sizes

• butt, in-line and

branch configurations • no installation tools

required

• spring closure mechanism

• aerial, underground and direct-buried

Part Number Capacity (pairs)

GLSP-A-10/5-80 Upto 3pr

GLSP-B-14/5-130 Upto 10pr

GLSP-C-18/5-180 Upto 30pr

Part Number PED-CAP-R-3-INT

PED-CAP-R-4L-INT

PED-CAP-R-4S-INT

• Provides an excellent environmental and

mechanical seal for

telephone splices in the

distribution network

• Suitable for use as an

overhead, underground or

pedestal joint closure in

both new construction and

maintenance applications

• Accommodates cables

ranging from 2 to 200 pairs

• Versatile branching system




Tel-SpliceTel-Splice connectors provide an

economical and reliable means of

splicing telephone cable conductors.

They are available in several

configurations for different applications.

Advantages• Durable—Highly resistant to moisture and

chemical attack. Flame-retardant models available

• Economical—lower applied cost; IDC (installation displacement connectors), gas-tight connections,

no pre-stripping required, means minimal operator

preparation

• Versatile—Available filled or unfilled; colour coded for easy identification: 2-wire, 3-wire, half-tap and Clear & Cap in loose piece or welded sticks

Applications

• Load coils

• Stub cables

• Ready access terminals

• Trunk and tool cables

Part Number CM-TS-19/26-1K – 2 wireCM-TS/3W-19/26-1K – 3 wire

Part Number CM-PBZ-YEL

CM-PBZ-PUR

Pica-Bond PICABOND®

connectors provide

an economical and

reliable means of

splicing multiconductor

telephone cable.

Lightweight and

compact, PICABOND

splices reduce the

space required

over other splicing

techniques by up to 33

percent.

• No pre-stripping or

cutting required,

can tap without service interruptions, eliminates

“turndowns”

• Colour coded to indicate size and type of wire;

used for butt, straight, bridge and half-tap

applications

• Lower applied cost, minimum training required

and higher application rates

The VX-connection

module provides

a connection point

between an exchange-side cable pair and

a distribution pair.

It incorporates a

5-point plug in module

to provide continuity and

a range of other options

including protection.

Removal of the plug-in module does not disturb

wire connections but makes contacts to them

available for testing to both sides of the network. It is

especially recommended for:

• Outdoor connections where the environmental

conditions are extremely aggressive

• Terminations where user development

characteristics require future flexibility in terms of the type of protection or filtering capabilities

The connection modules are designed for mounting

on a standard DIN rail and can therefore be

mounted in a variety of housings in whatever

quantities are required. The small footprint (2cm

wide) ensures a compact product.

VX Modules

Part Number:

CM-U-VX-MD-P VX Module

CM-VX-MD-CG04 VX 3 Pt Protector inc. Module



3M 211 Trim Out ConnectorThe 3M

Scotchlok™ Trim-

Out connector

is a “no-break

change” maintenance

connector. The

connector is

polypropylene IDC

with a built in cut-off

blade and test port. Wires

are positioned in the connector

from the sides, allowing the 211 to

be used as a replacement for problem connectors

without interrupting service.

Suitable for wire ranges from 0.4 – 0.9mm, with a

maximum insulation diameter of 2.08mm.

Scotchlok™ 557TG Self-Stripping Dropwire ConnectorsSelf-Stripping

Dropwire Connector

(as manufactured

by 3M, Part 557TG)

capable of connecting

two solid copper

wires, in the range

of 22-16 AWG

(0.6-1.29mm). The

maximum insulation diameter is .120” (3.0mm)

Krone LSA-PLUS® Disconnection Module

The Krone Disconnect is the industry leading

disconnect module.

A technically and commercially superior quick

connection system for all state-of-the-art networks.

Contacts that ensure the highest degree of reliability

even under the most adverse environmental and

climatic conditions. A completely reliable, gas-tight

connection between the contact and conductor.

That’s LSA-PLUS® technology.

The LSA-PLUS System family consists of a

comprehensive and diverse range of high density,

standard and special modules, mounting hardware,

test and patch cords, accessories and protection

devices. Voice, high-speed data transmission via

ISDN, ADSL, VDSL, cable TV, Internet access,

mobile networks: working in conjunction with

CommScope you will be able to confidently face the issues created by vast amounts of network

traffic. In addition, CommScope quality ensures total end-customer satisfaction. CommScope copper

connectivity solutions are designed to deliver fast,

safe and reliable transmission.

• Full disconnection module for jointing up to 10

pairs

• Suitable for solid wires diameter 0.4 to 0.8mm

with overall diameter 0.7 to 1.6mm

• Suitable for stranded wires diameter 7 x 0.12 to 0.32mm with overall diameter 0.7 to 1.6mm

• Look both ways test facility without the need to

disconnect

• Industry standard

Part Number CM-T211-1K

Part Number CM-TG-16/22

Part Number CM-IDC-K237A



Krone 237E Earthing BlockAll conductors in the

block are commoned to

a lead with a terminal

connection. It is

suitable for up to 20

wires when there are two wires per contact.

Krone 10 pr Dust CoverFor areas of high dust contamination the dust cover

can be fitted over the LSA-

PLUS® for

additional

protection.

Krone Label HoldersA range of fixed and flip top label holders

are available.

Krone Protection MagazineUnequipped

LSA-PLUS®

overvoltage

protection

magazine

2/10 for 10 off 3-pole GDTs 8x13. 3-point, primary overvoltage protection.

Please see below for details of the 3-pole GDT.

Part Number CM-IDC-K237E

Part Number CM-IDC-K237/PM

Part Number CM-IDC-K/S

Part Number CM-IDC-K237/DC

Krone 3-Pole Overvoltage Arrester• Standard overvoltage protection elements

• Limit overvoltages

• Absorption of high currents

• Two and three electrode versions

• Thermal overload protection

• Meets international standards

Passcomm can supply the full range of

standard and fail safe CommScope Overvoltage

Arresters. For more details, call Passcomm Sales today

on 01925 821333.

Locking Wedge – KroneUsed for marking a single pair,

particularly for high priority circuits.

Prevents disconnection or use of

test leads. Requires the use of the

insertion tool extraction hook for removal.

Part Number CM-IDC-K237/L 53A LABEL BLOCK & LABEL

CM-IDC-K237/51A

51A FLIP TYPE LABEL HOLDER & LABEL

Part Number CM-IDC-K24A

Part Number CM-4PCORD-K-2

CM-4PTEST-K-1.5BP

Test and Connection Leads for Krone 10pr Disconnection ModuleA range of 4 pole test and

connection leads are available for use

with the Krone 10pr disconnection module. The

connection leads have a plug fitted to both ends to enable connection of two modules, whereas the test

leads have a plug at one end only.

Insertion Tool – Krone• Designed for the use on all LSA-PLUS® contacts

• Service Life

0.4mm wire: 200,000 connections



• Ensures unparalleled contact security



Box Connection 201D

Available in standard low profile version, the box connection 201D is manufactured from shock

resistant, flame retardant ABS and is supplied empty or fitted with two off strips connection 237A and common earthing point, giving a total capacity of 20

pair.

Part Number:

Box Connection 201D Standard c/w 237A’s

CM-WB20-201D/2

Box Connection 201D Standard without 237A’s

CM-WB20-201D

Standard box dimensions 120 x 170 x 55mm

See separate section for 237A connection modules

and accessories

Box Connection 250 and 300 Series

The 250 and 300 Series Connection Box is a versatile plastic box designed to contain various backmount frames and mounting ancillary

components. The base has generous provision

for fixing cable ties, jumper rings, earth posts and connector mountings.

Part Number:

Box Conn 250 with 5 way backmount frame, 4 x Jumper Rings, Earth Post.

CM-WB50-251

Box Conn 251/5 with 5 x 237A’s

CM-WB50-251/5

Box Conn 300 Standard with 10 way backmount

frame, 4 x Jumper Rings, Earth Post.

CM-WB100-301

Box Conn 301/10 with 10 x 237A’s

CM-WB100-301/10

See separate section for 237A modules and

protection

Internal Environment Termination



501 Series Metal Connection BoxA range of four

cabinets that

compliments the larger

500 series Connection

Box range, meeting the requirements of

local pair distribution,

100, 200 and 400 pair

capacities. Each box is equipped with a stainless steel backmount frame to support 237A modules,

all doors open through 180 degrees to allow ease

of access. A two piece cover plate top and bottom

allows a range of options for cable access, cable

clamping points are behind the cover plates and

Jumper rings are fitted.

Part Number

501 Box with backmount frame, 100 pair capacity, 235

x 350 x 115mm, 3.2kg

CM-WB100-501

502H Box with backmount frame, 2 x 100 pair capacity, 425 x 350 x 115mm, 5.4kg

CM-WB200-502H


x 700 x 115mm, 5.2kg

CM-WB200-502


x 700 x 115mm, 8.6kg

CM-WB400-504

Backmount FramesThe Frame Mounting (or

backmount frame) is the

standard mounting frame

for 237 modules and IDC

strips. Manufactured from

Chromium Steel and

available in a wide range

of lengths, simple to use,

adaptable. lightweight and

corrosion resistant.

Part Number

Backmount Frame 11mm deep,

1 way

CM-BF11-1


5 way

CM-BF11-5


1 way

CM-BF30-1


10 way

CM-BF30-10


20 way

CM-BF30-20


34 way

CM-BF50-34


50 way

CM-BF50-50

Part Number

1U, Sub Rack, 3 way, Flat, 30 pair VF-91F-30




1U, Sub Rack, 3 way, Recessed, 30 pair VF-91R-30




19 Inch Sub RacksThe range of 19 inch sub racks

allow 10 pair 237 style IDC strips

to be fitted inside standard 19 inch



MDF (Main Distribution Frames) 111B, 222B/108AA series of extremely strong lightweight, vertical,

modular distribution frames for

terminating copper pair cables.

The 111B is compatible with

older style MDFs, eg 105, 108,

to allow extensions to existing installations.

All units can be side by side

wall mounted, or back to back

for free standing applications

using the fixings provided. Cable management is provided

by large jumper rings top and

bottom between terminal banks,

whilst individual terminal blocks

are provided with fixed fanning strips. Earthing is provided via

heavy copper earth communing

bar fitted to the bottom of the frame, running the full width.

Adjustable legs allow for uneven

floors, legs can be removed where height is a limitation.

Single Vert MDF.

Each single vert has a capacity of 69 x 10 Pair IDC strips, integral colour coded fanning strips allow

quick and easy pair identification

Part Number 111B Single vert MDF

VF-S-111B

Part Number Double Vert MDF

VF-D-222B

MDF Vert accessoriesPart Number

Slide Cover VF-SCVR-PR

Front Cover VF-FCVR-LK

Stand Off Kit VF-SOK

High Capacity Jumper Rings VF-JRK

Plinth 1A VF-P1A

Computer Leg Kit VF-CLK

Height with legs fitted, 2010 x 280 x 150mm, weight 6.8kg

Double Vert MDF (108A type)

The double vert MDF has a capacity of 138 x 10 Pair IDC strips

Height with legs 2010 x 570 x 150mm, weight, 25kg



Duct SealingTDUX and AccessoriesThe TDUX system is

a unique, inflatable, wraparound duct

sealing product for

permanently sealing

telephone cable ducts

in order to prevent the

leakage of water from

the duct into exchange vaults or manholes.

The system can be

installed even while

water is flowing out of the duct, resulting in

considerable time and cost savings.

• full product range for all duct diameters

• lifetime ± 20 years

• fast and easy to install and remove

• withstands 5 meters head of water and severe

environments

Duct SealsPart Number

ACC-TDUX-35 for cable ducts from 25-35mm

Inside Diameter (Packs of 25)











ACC-TUDX-150 for cable ducts from 125-150mm


Duct ClipsFor 3 or more cable entries the TDUX CL clip is

required

Part Number

ACC-TDUX-CL-60 for cable ducts from

75-100mm Inside Diameter

(Packs of 5)

ACC-TDUX-CL-80 for cable ducts from

100-125mm Inside Diameter

(Packs of 5)

TDUX Inflation ToolInflation tool using CO

2 gas cylinders. The tool

is designed with an ON/OFF switch and has an automatic pressure monitoring system to guarantee

the required inflation pressure of 3,0 ± 0,2 bar.

Part Number

Inflation Tool HT-TDUX-IT

CO2 Gas Canisters (Pack of 10) ACC-TDUX-CO2

TDUX Inflation GunInflation gun to be connected to a pressurised air bottle, pump or compressor, having an

outlet pressure

of 4 to 10 bar to

feed the inflating gun. The inflating gun is designed with a

safety relief valve and

audio signal device to

facilitate the installation.

Part Number

Inflation Gun HT-TDUX-IG



SimplexSimplex entry seals effectively seal around

and support conduits

and cables in through-

penetration openings or

core drilled penetrations, such

as building entrances or conduit openings. Simplex entry seals prevent leakage around conduits and

cables entering structures of all kinds. Because

of their split design, these plugs are retrofitable, removable and reusable.

Benefits:• Watertight and airtight

• Simple installation around in-place cables

• Excellent conduit or cable support• Stainless steel fasteners

• Ideal for manholes, buildings and cabinets

The service life of cable, splices, manhole hardware

and electronics can be increased when contact with

moisture is reduced. Underground structures can

be accessed more quickly and easily when they are

isolated and sealed from the inflow of water. Simplex plugs feature standard sized fasteners made of

stainless steel, easily installed with widely available

tools and are sized to fit the most commonly used core-drill bits, conduits and conduit termination

fittings.

BiplexCommScopes’ Biplex plugs seal 1 or 2 cables in a (nominal) 50mm O.D. (with 4.6mm wall) duct.

• All plastic construction-corrosion proof

• Water tight

• Simple to install

• Removable and reusable

• Chemically resistant

• No special tools required

on installation

• Protects cable from sharp corners at the duct entry

QuadplexQuadplex duct plugs are split plugs for sealing around,

organizing and supporting up to three subducts,

pipes, or cables. These plugs are designed for use in

round openings such as conduits, conduit fittings and core-drilled wall penetrations. Effective, long-term

watertight and air-tight seals, prevent mud, backfill and slurry from entering handholes, manholes and

buildings during the construction process. The

service life of cable, splices, manhole hardware

and electronics can be increased when contact with

moisture is reduced. Flooded underground structures

are accessed more quickly when they are isolated

from the ingress of water, mud and slurry.

Benefits:• Split design for retrofitting without disassembly• Anchor and organize subducts or multiple duct

systems

• Eliminate duct-edge abrasion to cables

• Expandable gasket allows for expansion and contraction of cables or subducts without leakage

• Excellent for supporting cables at the tops of riser

Hole plugsDesigned to temporarily or permanently

seal cable port or subduct openings

in Simplex, Triplex and Quadplex sealing devices, hole plugs are made

of solid polypropylene plastic and

larger sizes feature pull tabs

for easy removal. After an

initial cable installation,

additional cables may be

required in the future. To

accommodate this need, a multi-

port plug equipped with hole plugs is

recommended to allow for future cabling and proper

sealing without replacing the plug. Depending on the

new cable size, a Bushing Sleeve Adaptor might be

needed to complete the installation.

Jack Moon & Accessories



Blank Duct PlugsBlank duct plugs effectively seal conduits to reduce

the cost of cable placement and maintenance in

new underground construction projects and routine

work. These plugs are economical because they are

removable and reusable.

Duct Plug Durability:

Manufactured from high-impact plastic components,

combined with durable elastic gaskets, Blank plugs

are corrosion proof and effective as long-term or

temporary seals.

Economy and Safety:

Both water-tight and gas-tight, Blank duct

plugs prevent the flow of water and the costly sedimentation of duct banks and conduit systems

while confining problems of dangerous vapours to their source.

Convenience:

Each Blank plug is equipped with a rope tie device

to allow the securing of pull rope to the plug’s back

compression plate. Installers needing to prove the

duct or place pull rope can attach the rope to the

back compression plate of the plug and store excess slack rope behind the plug within the conduit system

for future use.

Bushing Sleeve AdaptorsDesigned to adapt to the CommScope Simplex, Triplex or Quadplex plug’s hole sizes to different cable or subduct sealing ranges, Bushing Sleeve

Adaptors allow installers to customize our duct

sealing product range to project-specific needs. When cables of different sizes occupy the same

conduit, Bushing Sleeves, rather than expensive custom plugs, solve the problem.

RoxtecA Roxtec sealing module consists of

two halves and has

removable layers

and a center core.

Thanks to the multi-

diameter technology,

one single module

can seal a cable

of several different

diameters simply by

peeling layers from the

module halves until a

perfect fit is achieved.

Made from EPDM

rubber Roxylon a module is flexible enough to shape itself

around a cable. Yet,

at the same time it is

rigid enough to retain its basic resilience and integrity

against physical and chemical exposure.

The Roxtec sealing system and its Roxylon have an approved record from the majority of certifying

authorities around the world for withstanding

exposure to a number of hazards and providing safety such as:

• fire resistance, halogen free, bromide free

• gas and water pressure resistance

• pull-out resistance

• stress load relaxation resilience

• UV resilience

• Blast load resistance

• Electromagnetic Compatibility (EMC)

Roxtec modules are used in frames and fitted around cables, as spare capacity or as compensation. The

modules can accommodate a cable diameter range

from 3.0 to 99.0 millimeters.

Roxtec safety seals are used extensively in the London Underground network.

To discuss any products from the full Roxtec range,

please call Passcomm Sales on 01925 821333.



Moisture Barrier Riveting ToolScrew-Type Moisture Barrier

Riveting Tool for the riveting of

267A moisture barrier rivets.

MaxCellMaxCell is the only flexible fabric innerduct system

designed specifically for the network construction

industry.

The unique fabric

construction allows MaxCell to conform to the shape of cables placed within, greatly reducing the wasted

space associated with rigid innerduct.

Today’s network owners and builders use MaxCell to increase their cable density by as much as

300%. Faced with the challenge of deploying new

infrastructure while minimizing investment costs,

using MaxCell will:• Reduce the number of conduits required for new

network construction

• Minimize the need for additional conduit in overlay

applications

• Enable incremental deployment to match system

requirement

MaxCell innerduct has been successfully installed in a variety of applications including:

• Telecom

• Wireless Backhaul

• Power/Utilities• Municipalities

• University, Corporate and Hospital campuses

• Cable TV

• Military and Government installations

Part Number CM-MBK-267

Part Number CM-MBR-267-T

Part Number CC-MBC-FTN

Part Number HT-RDG-50ML

Part Number HT-RDG-50ML

ACC-CTK-9BFR

ACC-CTK-9BFR2 (2 packs of resin)

ACC-CTK-9BFR-10 (10 kits and free gun)

ACC-CTK-9BFR2-10 (10 kits, each with

2 packs of resin and a free gun)

Cable AccessoriesMoisture Barrier Connector (Rivet) Complete Moisture

Barrier Connector

kit using 267A type

rivets to secure earth

continuity conductor

to cable sheath. Moisture Barrier Continuity Lead (Crimp)A 350mm, 2.5mm2 stranded,

tinned, black insulated

wire crimped at both ends with a

moisture barrier crimp. This provides continuity of

metallic moisture barriers in cable joints.

Cable Termination KitThe Cable Termination Kit

consists of a plastic sleeve

with heatshrink sleeve for

attaching to the cable and a

twin-pack syringe of resin for

blocking the cable grease.

Also included is a moisture

barrier continuity wire.

A tool is required for dispensing the resin correctly

Cable Resin Dispensing GunFor use with cable termination kit

above. For accurate mixing and dispensing of resin.



Heatshrink Sleeving

MWTM heat-shrinkable tubing is made from high

performance cross linked polyolefin for general use in the communications industry. It is available uncoated

for use as an insulator, or with a co-extruded hot melt adhesive where high mechanical and sealing

strength is required.

Part Number

MWTM 10/3 With Adhesive ACC-MW/AL-K-10/3-L

MWTM 10/3 Without Adhesive ACC-MWTM-K-10/3-L





MWTM 50/16 With Adhesive ACC-MW/AL-K-50/16 -L

MWTM 50/16 Without Adhesive ACC-MWTM-K-50/16 -L







Standard lengths available 250, 500, 750, 1000 and

1500mm.

Heatshrink End CapsPart Number

ACC-ECU-max/min (Unpressurised)

ACC-ECP-max/min (Pressurised)

Heat shrinkable end caps for pressurised and

unpressurised cables. Suitable for polyethylene and

metal sheathed cables. Can be supplied with a pre-

installed valve for pressure feeding or testing.

Non-pressurised cable end cap

Dimensions (mm)

Description Cable dia Length

min. max. min.

ACC-ECU-10/4 4 10 38

ACC-ECU-17/8 8 17 55

ACC-ECU-30/15 15 30 90

ACC-ECU-50/25 25 50 143

ACC-ECU-70/35 35 70 150

ACC-ECU-95/45 45 95 162

ACC-ECU-105/70 70 105 145

Pressurised cable end cap

Dimensions (mm)

Description Cable dia Length

min. max. min.

ACC-ECP-20/9 9 20 60

ACC-ECP-30/16 16 30 85

ACC-ECP-48/26 26 48 95

ACC-ECP-75/44 44 75 125

ACC-ECP-95/71 71 95 150



Cold Applied Shrink Tube 3M cold applied shrink tube for

environments where heat

shrink tubing is not an option,

hazardous areas and Mass

Transit installations where use of a flame and the granting of fire certificates is prohibitive.

Cable range Part Number

14mm - 8mm ACC-CSE-14/8-152

21mm - 10mm ACC-CSE-21/10-203

25mm - 13mm ACC-CSE-25/13-279

33mm - 18mm ACC-CSE-33/18-152

33mm - 18mm ACC-CSE-33/18-305

33mm - 18mm ACC-CSE-33/18-406

End Caps - Cold ShrinkThe 3M Cold Shrink EC-Series End

Caps environmentally seal and mechanically protect

exposed cable ends using no tools, mastics or tapes. The 3M Cold Shrink EC-Series End Caps install

quickly and cleanly without flame or grease. Cold Shrink end caps are factory expanded on removable inner-supporting plastic cores. Once the end cap is

positioned for installation around the end of a cable,

the supporting core is unwound and removed. With

the core removed, the live-memory action of the

specially formulated material shrinks the end cap into

position. The constant radial pressure of the Cold

Shrink material ensures a durable environmental

seal. The Cold Shrink material resists abrasion,

fungus, acids and alkalis and retains its resiliency

for years. Freezing or overheating due to ambient

temperatures encountered during shipping or storage

does not impair the end caps.

Cable range Part Number

20.9mm – 11.6mm ACC-ECCS-21/12

30.1mm – 15.9mm ACC-ECCS-30/16

49.2mm – 26.0mm ACC-ECCS-49/26

84.3mm – 45.5mm ACC-ECCS-84/46

Heatshrink Cable GlandsCommScope Heat-Shrinkable

Cable-Entry Seals (CES)

provide a watertight, fume-

tight seal where cables enter

connection boxes, bulkheads, or other enclosures.

CESs are available in two basic types: standard and

threaded. The standard CES for thin-wall enclosures

consists of a three-part assembly — a rigid plastic nylon nut, an O-ring and a heat-shrinkable moulded

area. The CES for threaded hole applications is a

one part assembly that combines a tapered thread

in rigid plastic nylon with a heat-shrinkable moulded

area.

Part Number Min

expanded

ID mm

Max

recovered

ID mm

Hole

Size

ACC-HG-CES-1 12.7 4.5 25

ACC-HG-CES-2 19 6.3 25

ACC-HG-CES-3 28 12.7 35

ACC-HG-CES-4 41 19 50

ACC-HG-CES-5 70 36 89



CWST Sheath RepairCWST repair sleeves are

based on the CommScope

Rayfort technology and can

be used on all unpressurised

cable types. The hotmelt

adhesive and split resistant

nature of the material ensure a permanent and

reliable watertight seal. Size range is from 8mm to

200mm diameter.

Sizing/ordering informationDimension in mm

Description Max.

Cable

dia.

Min.

cable

dia.

Lengths

supplied

CR-Size-Length 43 8 1500, 1000,

750, 500, 250

55 12 1500, 1000,

750, 500, 250

75 15 1500, 1000,

750, 500, 250

100 25 1500, 1000,

750, 500, 250

125 30 1500, 1000,

750, 500, 250

164 42 1500, 1000,

750, 500, 250

200 50 1500, 1000,

750, 500, 250

Cable De-Greasing Kit3M cable

degreasing

bag, a self-

contained kit, to

allow efficient, quick cable

degreasing.

Copper Cable Preparation KitContains sufficient tools to enable most

copper telecoms cables

to be prepared ready for

jointing and terminating.

Contains• KMS Cable Stripper

• Junior Hacksaw


• Cleaning Cloths

• Adjustable Wrench

• Insulation Strippers

• Insulated Screwdriver (Cross Head)

• Insulated Screwdriver (Flat Blade)

• Side Cutters – Flush Blade

• Tape Measure

• Electrician’s Scissors

• Tool Carrier

Part Number ACC-FCCK-600

Part Number KIT-CPK-C-01

Part Number ACC-TK/OS-25/50-BK-2 (25mm wide x 50mm high x 2m long)

ACC-TK/OS-37/37-BK-2 (37.5mm wide x 37.5mm high x 2m long)

Part Number ACC-TK/OS-25/50-GY-2

(25mm x 50mm x 2m)ACC-TK/OS-25/75-GY-2

(25mm x 75mm x 2m)ACC-TK/OS-37/37-GY-2

(37.5mm x 37.5mm x 2m)ACC-TK/OS-37/50-GY-2

(37.5mm x 37.5mm x 2m)ACC-TK/OS-50/50-GY-2

(50mm x 50mm x 2m)

Betaduct Trunking (Black) Black, UPVC betaduct

trunking. Open slot with clip on

lid. Available in 2 metre lengths.

Betaduct Trunking (Grey)Grey, UPVC betaduct trunking. Open slot with clip on

lid. Available in 2 metre lengths.



Critchley Cable Marker Carry Case Kit

The Critchley Cable Marker kit is now available in a

handy carry-case.

Always running out of the same characters?

Replacing the whole box every time?This new carry case is perfect for taking to site. It

contains segments for each character, meaning that

when characters need replenishing, they can be

easily identified without the need for a whole new kit.

Part Number 7 Way Strip; ACC-K-C7

12 Way Strip; ACC-K-C12


Part Number KIT-K-BY-100

Part Number ACC-K-BY-KIT-50

Part Number ACC-K-BY-character

Critchley “K” Type cable markers

K-Type markers and carrier strips are ideal for

identifying large cables, conduit and pipes, either

before or after termination. The standard carrier has

slotted ends allowing fastening with cable ties or

cable strapping.

Available as individual characters on reels of 500.

Critchley Carrier StripsCritchley Refill Kit



CommScope “Snap-on” MarkersCommScope

snap-on

markers are

convenient

and easy to

use. These

markers are

supplied

on a ‘wand’ applicator that simplifies and reduces installation time and saves on the cost of marking.

Snap-on markers are designed to stand the test of

time, preventing costly re-work before the life of the

equipment ends. This is why CommScope snap-

on markers are found today in power stations, oil

refineries, offshore platforms and other major projects around the world.

Features and benefits• Snap-on markers are the perfect way to

permanently and rapidly mark cables, wires, leads

and cores after termination and installation

• Easy to alter identification on cables that are already marked

• Secure grip for positive fixing to cable

• The high elasticity of the marker enables all types

of installation and conduction material to be

permanently marked without damage

• Applicator has a patented slit to prevent over-

expansion of the marker during application

• Made from polyoxymethylene which guarantees strength, dimensional stability, low moisture

absorption and resistance to chemicals

• Resistant against oils, cleaning agents, fuels and

alkaline solutions

• Zero-halogen material

• Ten sizes for cable diameters 0.04” to 0.75”

• Colour-coded option

Z Type Cable MarkersZ-Type® markers are individual push-on characters

used to identify wires and small cables permanently.

They are designed with an expanding profile, enabling each marker to accommodate a wide range

of wire/cable sizes. Z-Type® markers are a simple, cost-effective solution for many commercial wire

identification applications. The markers are supplied either straight cut or chevron cut: the chevron cut

option ensures the legends remain aligned. Standard

Z-Type® markers are yellow or white with black

legends and can be supplied as loose pieces packed

in boxes or on reels. Colour coded markers are also available.

• Resistant to sea water, fuels and oils

• 9 sizes covering wire diameters from 1.5mm to

12.7mm

Part Number ACC-STD-(AA=size, B=colour,

C=character)

Part Number ACC-CM/Z-AA-B-C

(AA=size, B=colour, C=character)

Railway Products


Railway Products


Section 4 Railway ProductsContents

Cabinets

Fibre Optic Products

Cable Products

Labels and Marking

Tools

Lineside Telephony

PAD’s Lists

Railway Products


Passcomm Box on PostThe Passcomm

BOP is a high

quality, lightweight

exterior Box On Post specially

designed for

trackside telecomm

and signalling use

where a full or half

loc cabinet is not

required. Easy to

deliver to site and

available pre-

wired with tailed

cables to customer

specifications

The BOP enclosure

offers three

DIN rail vertical

mountings, each

of which provides

a maximum capacity of up to

30 Mondragon

VX connectors.

Each DIN rail

vertical mounting

is provided with

a label holder for identification purposes. Wire management is maintained by the use of both

BetaDuct trunking and evenly spaced jumper rings.

All enclosure metal parts are bonded. The enclosure

door offers 3 point locking and has a full door length

stainless steel piano hinge for added security. The

door also opens to 180° for easy access. The base

blanking plate is pre-drilled with three main cable

ports and 10 spur cable ports.

• Weather protection meets requirements of

BS EN 60529:IP543CR12

• Material: 4003 Stainless Steel

• Available with 4003 stainless steel post

• Fits a standard SPT pre-cast concrete base

Passcomm Active Box on Post

The Passcomm Active BoP is designed for

applications where there is a requirement to house

trackside active equipment, such as the Cisco IE2000

and the associated power and cable management.

The Active BoP was developed for and has been

successfully installed on the Network Rail Edinburgh

– Glasgow Improvement Programme (EGIP).

• Weather protection meets requirements of

BS EN 60529:IP543CR12


• Available with 4003 stainless steel post

• Fits a standard SPT pre-cast concrete base

For full details of the project, a Case Study is

available on www.passcomm.co.uk

Can be configured, pre-kitted and pre-tailed to specific project requirements. To discuss, call Passcomm Sales today on 01925 821333.

Railway Products


Part Number Box - CAB-BOP-D275 Post – CAB-BOP-POST-D275

Passcomm Box on Post – D

The Passcomm BOP-D is a deeper and wider

variant of the standard BoP. The BOP-D features

a pitched roof, designed to offer protection

against solar gain.

The Passcomm BOP-D is designed to

accommodate up to 2x Cisco IE4000 switches.

The Passcomm BOP-D can be pre-kitted and pre-

tailed to your project specific requirements.

• Enclosure Size (WDH): 550 x 275 x 1667mm (inc post)


• Pitched solar shield roof

• Adapter bracket available to suit standard

half loc base

Railway Products


The cabinet is designed as a flexible housing to suit both current and future needs. It

accommodates this flexibility by providing for alternative pre-configured and interchangeable mountings to suit requirements. Other

configurations are also easily accommodated depending upon requirements.

Features:

• Cross Connect 208pairs with 104 Pairs per

side (Using CommScope VX Connectors)

• IDC Cross Connect 1500 Pairs (Using

Krone 237a LSA-Plus Connectors)

• Enclosure Size (WDH) 580x500x1805mm

• Up to 28/29 U-spaces available

• Tested to BS EN 60529 IP55

• Enclosure Weight: 120kg Empty

• Finish Grey BS4800:00A05

• Pitched ‘Pent Roof’

• Door hold back bar to minimum of

110degrees

• 3 point locking with extra hole cut-out for customer specified locking mechanism

• Document holders provided

• Earth post in base of enclosure

• Protected cable entry and exit through base

• A pre-cut sealing gasket to suit the base

footprint is supplied

• Supplied with lifting points

Passcomm XC Cross Connection Cabinet

Railway Products


XC with GCO2-F Flat FISTThe XC with

GCO2-F is a

copper and fibre combined cabinet.

The copper

connections can

be accessed from

one door and the

Unistrut mounted

FIST-GCO2-F

can be accessed,

spliced and jointed

from the opposite

site.

This provides total

flexibility for the number of cable

entries, number

of splices and

differing cable

sizes which may

be required. The

GCO2-F has

capacity for up to:

Single Circuit Splicing: 48 splices on 24 trays

Single Element Splicing: 144 splices on 12 trays

In many locations, this configuration of the XC removes the need for a trackside pit.






• Door hold back bar to minimum of 110degrees





• A pre-cut sealing gasket to suit the base footprint

is supplied

XC with BUDISimilarly to the

XCNR1 with

GCO2, the XC

with BUDI utilises

both sides of

the XC cabinet

to provide both

a copper and

fibre interface for trackside

telecoms and

signalling

locations.

The CommScope

BUDI-M is

marine-ply

mounted in the

cabinet and

provides capacity

for up to 144

splices (single

element) and

provides space for a cable loop.











• A pre-cut sealing gasket to suit the base footprint

is supplied

Railway Products


FIST-GCO2The generic closure FIST-GCO2 is an

environmentally sealed enclosure for the FIST fibre management system

allowing splicing and

passive component

integration in the external network.

Features

• Single-ended design

• Base and dome

sealed with clamp and

O-ring system

• 6, 8 or 16 round entry/exit ports for drop cables and 1 or 2 oval ports for looped cable

• UMS (universal mounting system) profiles provide foundation for mounting combinations of SOSA2

(splice only sub-assembly) and/or SASA3 (splitter array sub-assembly) modules, which consist of a

modular grooveplate and trays


loose tube, central core, ribbon fibre• Uncut fibres can be stored as single circuits in

trays and/or as cable elements in storage space between profiles

• Storage baskets available for mass storage of

fibres of central core cable constructions• Closure can be used in aerial, pedestal and

underground (up to 5 meters) environments

FIST-GCO2-F (Flat)The generic closure FIST-

GCO2-F is a compact version of

CommScope’s standard FIST-

GCO2 closure. Like the FIST-

GCO2, the FIST-GCO2-F is an environmentally

sealed enclosure for the FIST fibre management system allowing splicing and passive component

integration in the external network.


• Base and dome sealed with latches and O-ring

system

• Bases available with 6 round ports (drop cables)

and 1 oval port (looped cables) or 8 round ports

• Single-sided UMS (Universal Mounting System)

frame provides foundation for mounting

combinations of SOSA2 (splice only sub-

assembly) and/or FSASA2 (field-installable splitter array sub-assembly) modules, which

consist of a modular grooveplate and trays


loose tube, central core, ribbon fibre and blown cabling

• Uncut fibres can be stored in trays • Mounting ears available as part of the dome

• Well-suited for use in combination with heat

shrink or multi-out gel seals

• Closure can be used in aerial, pedestal and

underground (up to 5 meters head of water)

environments

Passcomm Anti-Vandal Telephone EnclosurePasscomm offer a stainless steel anti-vandal enclosure for

lineside phone, fitted with BR number 1 lock.

Dimensions: 450mm x 230mm x 310mm

Railway Products


Part Number CF-BPE-O-TC

Part Number CL0ISASA9PS-BOX

Oval Port Seal Kit

Part Number CF-BC6-OSK-DJ

Part Number CF-BC6-RSK-DJ

Circular Port Kit Extra length heatshrink circular port seal kit for use with the CommScope FIST GCO2 Closure when

double jacketed cables are used.

Available individually

Fibrain Launch Lead

Fibre Closure

Fibre Launch LeadLaunch Lead kit,

comprises of 1km

of Samsung fibre, boxed and terminated, supplied with 2

Patchcords, SC/APC – SC/APC and SC/APC –FC/PC


3M BPEO Mechanical

Closure Kit for use,

prior to active cabinet

installation. Closure sits

inside the troughing.

Available individually.

Extra length heatshrink oval port seal kit for use with the CommScope FIST GCO2 Closure when double

jacketed cables are used.


Fibrain Launch Lead

designed with colour

coding for easy

identification of fibre types, including G.657

and OM1/2/3/4

Railway Products


Jumper WireTinned Jumper Wire , 0.5mm,

2W jumper wire blue/yellow and red/white with black bandings on each leg. This

jumper wire supercedes CW1257D

100m Reels

Part Number CU-JW-9541NR-100 (Blue/Yellow w/blk bands)

CU-JW-9557NR-100 (Red/White w/blk bands)

Part Number CM-JB10-VX-U-1/5N

Part Number CM-SP35

10 Pair VX Enclosure Plastic enclosure with one

cable input and 5 cable

outputs, 10 VX modules

mounted on DIN Rail.

VX Spacer Screw fix spacer for the VX Connector Modules mounted on Din Rail


Pre-Terminated Optical Fibre Cable AssembliesDesigned to be used in applications

where there is insufficient space for an Optical Distribution Frame or BUDI

termination enclosure. Available in 4, 8 and

12 fibre configurations, using the 12F Drop Cable.

Connector Options:• SC/APC • LC/PCCan be pre-terminated at both ends, or single-ended

where a drop is required from a track joint.

Designed for ease of installation and maintenance

in enclosures such as the XC and Active BoP and

BoP-D.

Custom made to specific lengths and connector types.

Part Number FIB-12-7A1-LT-CST-PE-BK

CommScope 12F Drop Cable12 Fibre singlemode cable, designed for trackside

use specifically in ‘drop’ applications where the traditional 24F FTN cable is either physically too big

or creates unnecessary cable management issues,

such as:

• Requirement to manage all unused fibres, as per Network Rail standard

• Transportation weight

• Bend radius of the cable and fibre

Features and Benefits• A gel filled central loose tube contains 12x bend

insensitive (G657A1+)* optical fibres• Single jacketed = easy to manage and prepare

• Layer of rodent resistant E-glass yarn strength

members

• Corrugated Steel Tape Armour

• LLDPe sheath

• 96kg per kilometre compared with 280kg for the

FTN 24F cable

*G657A1+ - bend insensitive fibre which is backward compatible with the standard G652D fibre used in the FTN cables.

Heatshrink ‘GAP’ Kit Wraparound Heatshrinkable Closure

Kit for ‘gapping’ the cable sheath,

both fibre and copper cables.Available individually

Part Number CG-100-55-12

Part Number CG-100-55-12-SAC

Heatshrink GAP Kit (DISAC) Wraparound Heatshrinkable Closure

Kit for ‘Gapping’ the DISAC (Super

Armoured) optical fibre cable sheath.

Railway Products


Part Number SPL0001 60mm clear splice protector

SPL0002 45mm clear splice protector

Part Number CC-43/8-150CC-55/12-300

CC-100/25-460

Part Number CM-TS-19/26-1K

Heatshrinkable Closure for Copper Cables A CommScope XAGA Heatshrinkable Closure,

wraparound zip type, for use with all FTN Copper

cables up to and including 50 pair 0.9mm This closure

has been designed specifically for Network Rail approved specification cables.

Heatshrink SleevingMWTM heat-shrinkable tubing is made from

high performance cross linked

polyolefin for general use in the communications

industry. It is available

uncoated for use as an insulator, or with a co-

extruded hot melt adhesive where high mechanical and sealing strength is required.

Standard lengths available 250, 500, 750, 1000 and

1500mm.

Other lengths are available on request.

Telsplice ConnectorsTelsplice IDC Connectors for use with all

Network Rail Copper cables connector


HD Connectors and U LinksA range of type 43

HDC connectors

and U links are

available. HDC

U-Link for type 43

connectors, used to

link adjacent pairs

of connectors on the

DDF mounting block

Part Number WEI-STL5

Part Number CON-H43-UA U-link

CON-H43-UB U-link with test port

Standard 2BA Terminal BlockTerminal Block for up to

6 terminations, washers

and nuts supplied.

STL 5 Terminal BlockG-rail Mounted Terminal

Block for stranded wires

up to 2.5 sq mm

Part Number CM-2BA-KIT

Heatshrink Splice Protectors

Cabinet Moisture Barrier Termination Kit

Part Number CM-MBK-CAB

Kit contains

2 x 0.75M Stranded, 2.5 sq

mm MB Wire

2 x 2.5 sq mm, Din Rail mounted screw

terminals

Available as individual kits

Passcomm carry 1000’s of

clear 45mm and 60mm splice

protectors for ex-stock delivery, plus a range of colour coded

protection sleeves and ribbon

splice protectors.

Railway Products


Part Number ACC-STD02-W-0 to 9

ACC-STD02-W-A to Z

CommScope ‘Snap-On’ Markers

Exterior Cabinet Labels

Part Number FTN-CAB-LBL-INT

Part Number FTN-CAB-LBL-EXT

Part Number FTN-CAB-LBK-VA (For the A vert)

FTN-CAB-LBK-VB (For the B vert)

Interior Cabinet Labels230 x 45mm Self Adhesive, Black on White with individual cable designation X-XXXX-XXXX-X-XX

Available individually (Cable designation needs to be

provided)

Interior Cabinet Vert Labels

FTN Engraved Cabinet Labels

CommScope snap-on markers are convenient and

easy to use. These markers are supplied on a ‘wand’

applicator that simplifies and reduces installation time and saves on the cost of marking. Snap-on markers

are designed to stand the test of time, preventing

costly re-work before the life of the equipment ends.

This is why CommScope snap-on markers are

found today in power stations, oil refineries, offshore platforms and other major projects around the world.

Features and Benefits• Snap-on markers are the perfect way to

permanently and rapidly mark cables, wires, leads

and cores after termination and installation

• Easy to alter identification on cables that are already marked

• Secure grip for positive fixing to cable• The high elasticity of the marker enables all types

of installation and conduction material to be

permanently marked without damage

• Applicator has a patented slit to prevent over

expansion of the marker during application• Made from polyoxymethylene that guarantees

strength, dimensional stability, low moisture

absorption and resistance to chemicals

• Resistant against oils, cleaning agents, fuels and

alkaline solutions

• Zero-halogen material

• Ten sizes for cable diameters 0.04” to 0.75”

• Color-coded option

Traffelite Vert labels, screw fixing (screws supplied), 105 x 20mm, Black on White with individual cable designation (two labels per cabinet for the A and B

vert) X-XXXX-XXXX-(A or B)

Available as a pair (cable designation needs to be

provided)

230 x 45mm Self Adhesive,

Black on Yellow, with individual

cable designation, X XXXX-XXXX-X-XX

Available individually (Cable designation needs to be

provided)

Railway Products


Critchley ‘K’ Type Cable MarkersK-Type markers and

carrier strips are

ideal for identifying

large cables,

conduit and pipes,

either before or after

termination. The standard

carrier has slotted ends

allowing fastening with cable ties or cable strapping.

Available as individual characters on reels of 500.

Critchley Carrier Strips

Critchley Cable Marker Carry Kit with Case

Passcomm has produced a handy carry case for the

Critchley Cable Marker kit. This makes taking the kits

to site easier and allows users to re-order individual

letters and keep the carry case.

Part Number KIT-K-BY-100

MDFs MDF (Main Distribution Frames) 111B, 222B/108AA series of extremely strong lightweight, vertical,

modular distribution frames

for terminating copper

pair cables. The 111B is

compatible with older style

MDFs, eg 105, 108, to

allow extensions to existing installations.

All units can be side-by-

side wall, mounted, or back

to back for free standing

applications using the fixings provided. Cable management

is provided by large jumper

rings top and bottom between

terminal banks, whilst individual

terminal blocks are provided

with fixed fanning strips. Earthing is provided via heavy

copper earth communing bar

fitted to the bottom of the frame, running the full width.

Adjustable legs allow for

uneven floors, legs can be removed where height is a

limitation.

Part Number 111B Single vert MDF

VF-S-111B

Part Number Double Vert MDF

VF-D-222B

Part Number 7 Way Strip; ACC-K-C7



Part Number ACC-K-BY-KIT-50

Part Number ACC-K-BY-character

Critchley Refill Kit

Single Vert MDF.

Each single vert has a capacity of 69 x 10 Pair IDC strips, integral colour coded fanning strips allow quick

and easy pair identification

Double Vert MDF (108A type)

The double vert MDF has a capacity of 138 x 10 Pair IDC strips

Height with legs 2010 x 570 x 150mm, weight, 25kg

Railway Products


ToolingCrimping Pliers (Telsplice)CommScope

Telsplice ratchet

crimp tool.

BetaDuct TrunkingSlotted, Black or Grey,

BetaDuct Trunking

with clip on lid,

25mm wide x 50mm high x 2M long.

Available in 2m lengths

Part Number CM-TS-FTN-RCT

Part Number T000030

Part Number HT-TC-370141

Part Number CM-TS-FTN-CT

Part Number CM-T211-1K

Part Number CM-MBK-MDF

Part Number CM-SCK-2P

Part Number ACC-TK/OS-25/50-GY-2ACC-TK/OS-25/50-BK-2

Gas Nozzle‘C’ Type Gas Nozzle

for heatshrinking

applications.

Telsplice Crimp ToolEconomy Telsplice crimp tool.

3M UDC IDC IDC crimp for

effecting a “no

break” change

to a copper

wires

Stainless Steel Tube CutterTube cutter

for the super

armoured optical

fibre cable (DISAC).

VX Spur Kit For CabinetsSpur Cable Kit for 2pr cable

Moisture Barrier Termination Kits For MDFMoisture Barrier Termination

Kit for 1 cable on

MDF (c/w DIN Rail)

Railway Products


Longitudinal Cable Stripper

Part Number HT-KMS

Part Number HT-KMS-BLADE


Replacement Blades

“Can opener”

type sheath

stripper, easy

action.

Cable De-Greasing Kit3M cable

de-greasing

bag, a self-

contained kit, to

allow efficient, quick cable

degreasing.

Part Number Part No.HT-CCS-4/29 For cables 4.5mm-19mm

Part No.HT-CCS-19/40 For cables 19mm-40mm

Circumferential Cable Stripper Cable sheath stripper with circumferential action.

Part Number HT-CCS-6/25

Kabifix FK28 Cable Sheath Stripper Hand-operated, easy to use. Cable

Sheath O.D. range 6.0-28.0mm.

Safe and fast stripping even for

strong outer sheaths.

Kabifix LK25 Cable Sheath Stripper• Constructed especially for

optical cable, coaxial and moisture-proof cables 0 6 -

25mm (1”) in diameter

• Constructed also to cut plastic

tubing 0 6 - 25mm (1”) in

diameter

• Durable and accurate enough to

cut strong outer sheaths reinforced

with aluminium screening

• Rocking lever changes from circular to

longitudinal cutting

• Adjustable cutting depth


Railway Products


Fixed Telecoms

RA708 Weatherproof telephoneCB, grey, with curly cord

Part Number

PADS No.

CAB-TEL-DAC-EXCC

087/000658

Part Number

PADS No.

CAB-TEL-DAC-EXCC-Y

087/000657

Part Number

PADS No.

CAB-TEL-DAC-EX

087/000660

Part Number

PADS No.

CAB-TEL-DAC-EX-Y

087/000659

Part Number

PADS No.

CAB-TEL-DAC-FKCC

087/000654

Part Number

PADS No.

CAB-TEL-DAC-FKCC-Y

087/000653

Part Number

PADS No.

CAB-TEL-DAC-FKSC

087/000656

Part Number

PADS No.

CAB-TEL-DAC-FKSC-Y

087/000655

Lineside TelephonyPasscomm supply DAC rail telephony products. DAC design and manufacture a wide range of weatherproof

telephones, emergency telephones and help points. This includes the Network Rail PADS accepted RA708 and

RA711 telephones, which are available as PSTN, GSM/GSM-R and VoIP. These highly reliable and easy to install telephones and handsets are manufactured to extremely high standards.

Vandal and weather resistant telephones are a vital component when providing private and public access

communication.

RA708 Weatherproof telephoneCB, grey, with steel cord

RA708 Weatherproof telephoneFull Keypad, grey, curly cord.

RA708 Weatherproof telephoneFull Keypad, grey, steel cord.

RA708 Weatherproof telephoneCB, yellow, curly cord.

RA708 Weatherproof telephoneCB, yellow, steel cord.

RA708 Weatherproof telephoneFull Keypad, yellow, curly cord.

RA708 Weatherproof telephoneFull Keypad, yellow, steel cord.

Railway Products


Part Number

PADS No.

RA711-SB

087/000664

Part Number

PADS No.

RA711-CB

087/000665

Part Number

PADS No.

503483

087/000667

Part Number

PADS No.

RA711-NR

087/000666

Part Number

PADS No.

RA711-2B

087/000663

Part Number

PADS No.

RA708-CB-G-S-WL

087/000651

Part Number

PADS No.

RA711-3B

087/000662

Part Number

PADS No.

RA708-CB-G-C-ND

087/000669

Part Number

PADS No.

RA711-FK

087/000661

Part Number

PADS No.

600025

087/000668

RA711 Single button, CB (hot dial) telephone

RA711 Single button auto dial telephone.

RA711 Two button auto dial telephone.

RA711 Three button auto dial telephone.

RA711 Telephone with full keypad

On Wall Box for RA711 Telephone

Top of pole telephone mounting bracket

RA708 Weatherproof telephoneCB, grey, steel cord, No1 BR Lock

RA708 Trackside telephoneCB, for use when housed within AVH.

Universal bracket (for use on existing Gai-Tronics and Passcomm mounts).

Railway Products


GSM-R and GSM Telephones

Part Number

PADS No.

RA708-FK-Y-C-GSMR

087/038193

RA708 Weatherproof telephonefull keypad, yellow, curly cord,

GSM-R

Part Number

PADS No.

RA708-CB-Y-C-GSMR

087/038197

RA708 Weatherproof telephoneCB, yellow, curly cord, GSM-R

Part Number

PADS No.

RA708-FK-G-C-GSMR

087/038194

Part Number

PADS No.

RA708-CB-Y-S-GSMR

087/038198

RA708 Weatherproof telephonefull keypad, grey, curly cord, GSM-R

RA708 Weatherproof telephoneCB, yellow, steel cord, GSM-R

RA708 Weatherproof telephonefull keypad, grey, steel cord, GSM-R

Part Number

PADS No.

RA708-CB-G-C-GSMR

087/038199

Part Number

PADS No.

RA708-FK-G-S-GSMR

087/038195

RA708 Weatherproof telephoneCB, grey, curly cord, GSM-R

Part Number

PADS No.

RA708-CB-G-S-GSMR

087/038200

Part Number

PADS No.

RA708-FK-Y-S-GSMR

087/038196

RA708 Weatherproof telephonefull keypad, yellow, steel cord,

GSM-R

RA708 Weatherproof telephoneCB, grey, steel cord, GSM-R

Lineside PostGalvanized steel post with welded base

that mounts onto concrete base. Post has

a welded plate top that accepts the fixings on both weatherproof and level crossing

lineside telephones.

Lineside Post Post has a welded galvanized top

mounted fixing plate to accept anti-vandal lineside telephone enclosure.

Part Number CAB-POST-LP104ET6

Part Number CAB-POST-FP104E

Railway Products


Description Item Code PADS Number

Flat FIST Optical Through Closure c/w oval port kit CF-FC6-24-6-DJ-T 087/004358Flat FIST Optical Spur Closure c/w oval port and round port kits CF-FC6-24-6-DJ-S 087/004359Extra length heathshrink circular/round port seal kit CF-BC6-RSK-DJ 087/004355FIST GCO2 Optical Through Closure c/w oval port kit CF-BC6-24-6-DJ-T 087/004460FIST GCO2 Optical Spur Closure c/w oval port and round port kits CF-BC6-24-6-DJ-S 087/004461Oval Port Seal Kit for 24 Fibre Closures - Extended CF-BC6-OSK-DJ 087/004462Round Port Seal Kit for 24 Fibre Closures - Extended CF-BC6-RSK-DJ 087/004463Add. Items for Oval Port Seal for 24 Fibre DISAC KIT0007-24SA 087/004464Add. Items for Round Port Seal for 24 Fibre DISAC KIT0007-24SA/RSK 087/004465FIST SB2 Fibre Termination Box (See Cert for details) FIST-SB2-8KIT005 087/004337FIST MB2-T Fibre Termination Box (See Cert for details) FIST-MB2-T 087/004371FIST MB2-S Fibre Splice Box (See Cert for details) FIST-MB2-S-N-01 087/004374FIST CTB2 Compact Fibre Termination Box (See Cert for details) FIST-CTB2-4-S2-S 087/004363FIST GB2 Fibre patch/splice box (See Cert for details) FIST-GB2-24-AT 087/004372TYCO Splice trays 4 way single circuit FIST-SOSA2-4-SC-S 087/004365TYCO Splice trays 4 way single element FIST-SOSA2-4-SE-S 087/004361TYCO Splice trays 8 way single circuit FIST-SOSA2-8-SC-S 087/004362Patchcord cable gland 4-way FIST-GB-GLD16-PT4 087/004804Cable gland PG16 FIST-GB-GLD16 087/004805SC/APC Adapter and retainer CF-GB/AD-SA 087/004368Strain Relief Device (ENSTO) with double-D washer FIST-SB/MB-STRBR-01 087/004367Heatshrink cable gland 3-12mm ACC-HG-CES-1 054/109179Heatshrink cable gland 6-17mm ACC-HG-CES-2 054/109175Heatshrink cable gland 13-26mm ACC-HG-CES-3 054/109176Heatshrink cable gland 19-40mm ACC-HG-CES-4 054/109164Heatshrink cable gland 36-70mm ACC-HG-CES-5 054/109181Telsplice CM-TS-19/26-1K 054/012233Box on Post (excluding post and base) CAB-BOP-AT02-5 087/007528Post for BOP CAB-BOP-POST-AT02-5 087/007529Concrete base for BOP CAB-BASE-LSTP 087/007530BOP including post and base CAB-BOP-30/3-B 087/007531XCNR1 Cross Connection Cabinet (Cabinet Only) CAB-XC1-55/3 087/007525Half loc concrete base for XCNR1 CAB-HLC-CBK 087/007526XCNR1 Cross Connection Cabinet and half loc concrete base CAB-XC1-55/3-B 087/007527Sheath gap kit (copper and optical) CG-100-55-12 087/037942Mondragon VX module and continuity plug CM-U-VX-MD-P 087/002901Mondragon VX 3 point protector including module CM-VX-MD-CG04 087/029907Tyco FIST GPS2 fibre splice management system FIST-GPS2-1-1AF-6-UK16 087/004310Side Cable Termination Unit FIST-CT-S-2 087/004311Back Cable Termination Unit FIST-CT-B-2 087/004312Chassis 268142-000 087/004313E2000/APC Pigtails 411120-000 087/004314E2000/APC Adapters & Retainer 636034-000 087/004315

Network Rail - PADS Ref List Updated: July 2016

Railway Products


Description Item Code PADS Number

125mm Chassis Trays FIST-GPST-8-EAN-2 087/004316Krone 237a LSA-PLUS Disconnection Module CM-IDC-K237A 087/050050Krone 237a LSA-PLUS insertion tool with sensor CM-IDC-K/S 087/050051Krone 237a LSA-PLUS insertion tool without sensor CM-IDC-K/LSA 087/050052Krone 237a LSA-PLUS Protector Magazine CM-IDC-K237/PM 087/002958Krone 237a LSA-PLUS Gas Gap Arrester CM-IDC-K-OVA/14FS 087/004225Krone 237a LSA-PLUS Surge Arrester CM-IDC-K-5P180 087/004222Krone 237a LSA-PLUS Surge Arrester - Maintenance Free CM-IDC-K-5PBOD 087/004223Krone 237a LSA-PLUS Earthing Rail CM-IDC-K-ER 087/004224Jumper Wire (Blue/Yellow w/black bands) CU-JW-9541NR 006/047241Jumper Wire (Red/White w/black bands) CU-JW-9557NR 006/04724210 Pair VX Tunnel Box CM-JB10-VX-U-1/5 087/039422Heatshrink Wraparound Cable Joint 2-10pr CC-43/8-150 087/037984Heatshrink Wraparound Cable Joint 10-50pr CS-55/12-300 087/037985Heatshrink Wraparound Cable Joint 50-100pr CC-100/25-460 087/037986Heatshrink Wraparound Cable Joint Branching Kit 2-50pr BOKT-5S-43/8-75/15 087/037987Heatshrink Wraparound Cable Joint Branching Kit 50-100pr BOKT-5M-92/25-125/30 087/037988Heatshrink Wraparound Cable Joint for Pressurised Cables XAGA-1000-200/65-720 087/037989Heatshrink Wraparound Cable Joint for Pressurised Cables XAGA-1000-200/65-900 087/037990Lineside Telephone Box (Anti-Vandal Enclosure) CAB-BOP-TEL-A/T 087/007540Singlemode Laser Light Source (1310 and 1550) TES-DL1315 087/011037Multimode Light Source TES-LS20D 086/011038Optical Power Meter TES-PM32H 086/011039Network Rail Maintenance Joint - Flat Fist CF-FC6-NR-MAINT 087/004466

FIST-GCO2-BC6-NN 087/004352DAC

Lineside Telephone - grey, steel cord RA708-CB-G-S CAB-TEL-DAC-EX 087/000660Lineside Telephone - grey, curly cord, no door RA708-CB-G-C-ND CAB-TEL-DAC-IN 087/000669Lineside Telephone - yellow, steel cord RA708-CB-Y-S CAB-TEL-DAC-EX-Y 087/000659Lineside Telephone - grey, steel cord w/ No1 BR lock RA708-CB-G-S-WL 087/000651Lineside Telephone - grey, curly cord w/ No1 BR lock RA708-CB-G-C-WL 087/037802Lineside Telephone - full keypad, grey, curly cord RA708-FK-G-C 087/000654Lineside Telephone - full keypad, grey, steel cord RA708-FK-G-S 087/000656Lineside Telephone - full keypad, yellow, curly cord RA708-FK-Y-C 087/000653Lineside Telephone - yellow, curly cord RA708-CB-Y-C 087/000657Lineside Telephone - grey, curly cord RA708-CB-G-C 087/000658Telephone - handsfree telephone, full keypad RA711-FK 087/000661Telephone - handsfree telephone, CB RA711-CB 087/000665Telephone - handsfree telephone, single button autodialler RA711-SB 087/000664Telephone - handsfree telephone, two button autodialler RA711-2B 087/000663Telephone - handsfree telephone, three button autodialler RA711-3B 087/000662Wall/Post Mountable back box for surface mounting RA711 RA711-NR 087/000666Side of post mounting brackets for RA708 (pair) 6/10/3425 087/038155Universal bracket (for use on existing GAI-Tronics mounts) 600025 087/000668Top of post mounting kit grey for RA708 503483/2-1 087/000667

Cabinets & Racks


Section 5Cabinets & RackContents

CommScope Racks

Passcomm Rail Cabinets


Multimedia Cabinets

Anti-vandal Cabinet

Accessories

Cabinets & Racks


CommScope FIST-GR2The Generic Rack, FIST-GR2, is an all-purpose

metal rack designed to accommodate the FIST

fibre management system in an exchange, head end or customer premises environment. FIST-GR2

is typically used to house connector panels and

separate shelves for splicing, patching, equipment

and devices.

The unit has the following features:


• Many rack configurations are possible by using different combinations of the base frame and side

duct(s)

• ETSI mounting profiles with cage nuts for shelf mounting are provided at the rear of the rack,

allowing optimal access from the front

• Horizontal and vertical patchcord management

(HPM and VPM) for storage of functional patchcord

overlength

• Horizontal and vertical patchcord storage (HPS

and VPS) for excess patchcord overlength between the shelves and either the equipment or

adjacent racks

• Bend control on all fibre routing• A structured division and distribution of the cable

elements

• A wide variety of options –

– Cable attachment plates can be mounted in any

location (top/bottom) in the side duct

– Mounting bracket adapters for 19” shelf

mounting - Equipment mounting bracket

adapters

– Easy access to cables, pigtails and jumpers

during installation, maintenance and upgrade

– Easy adaptation to specific applications by variation of the rack configuration, the shelf configuration and routings of pigtails and jumpers

• Various mounting options - Wall mounting: stand

alone or multiple side-to-side mounting - Back-to-

back mounting

Cabinets & Racks


CommScope FIST-GR3

All-purpose, easy-to-assemble FIST-GR3 and

FIST-GR3F racks accommodate the FIST fibre management system in a central office, head-end or customer premises environment.

Several versions of the rack are available:

One series based on the ETSI standard

(600mm wide); and one on the 15-inch standard

(450mm wide).

With the addition of side ducts, total width of the

rack framework varies between 600 and 1200mm.

Rack heights of 1.8 or 2.2 meters are available. All

versions feature flexible shelf spacing and accept a range of accessories such as panels and doors to

complete the installation.

Both racks house connector panels and separate

shelves for splicing, patching, equipment and

devices. The racks allow superior management

and storage of pigtail and patch cord overlengths.

FeaturesEasy handling

• Compact, efficient packaging means less waste• Easy to transport, store, handle and install due to

compact design

• Universal installation manual (drawings, no words)

• Assembly requires only simple tools allowing faster

installations than standard racks

Flexibility

• Compatible with CommScope’s FIST-GR2 racks

• Accepts CommScope‘s FIST-GSS2/GPS2 and FIST-GSS3/GPS3 shelves


• ETSI mounting profiles with cage nuts for shelf mounting provided at rear of the rack for optimal

access from the front

• Optional units allow horizontal and vertical patch

cord management and storage of excess patch cord overlength

• Bend control on all fibre routingAll-Purpose rack

• Structured division and distribution of cable

elements

• Wide variety of optional accessories

• Cable attachment plates incorporated into side

duct

• Easy access to cables, pigtails and jumpers during

installation, maintenance and upgrade

• Easy adaptation to specific applications by changing rack or shelf configuration, as well as routings of pigtails and jumpers


• Wall mounting, stand-alone or multiple side-to-side

mounting (optional kit)

• Back-to-back mounting

• Various rack options to suit all application

requirements

• Different side ducts (150, 300mm) with drums for

proper fibre management• Different doors

• Front mounting options

• Depth extension kits• Overlength storage bays

Cabinets & Racks


FIST-UniversalThe Universal Rack, FIST-UR is an all-purpose metal

rack to accommodate the FIST fibre management system in an exchange, head end or customer premises environment. FIST-UR is typically used

to accommodate splicing and patching shelves and

other equipment shelves.

The unit has the following features:• A solid, 400mm deep rack

• Various sizes to accommodate low, medium and

high fibre densities

– Height: 2.2m

– Width: 0.8m, 1.0m and 1.2m

• Its unique sliding mechanism allows easy

reconfiguration

– To accommodate metric, 19” as well as 23”

shelves

– To adapt the available space left and right from

the shelves

• Horizontal and vertical pigtail management (HPM

and VPM) for storage of patchcord overlength

allowing patching within a single rack without

uncontrolled overlengths

• Horizontal and vertical pigtail storage (HPS and

VPS) for excess patchcord length

• Bend control on all fibre routing

• A structured division and distribution of the cable

loose tubes

• A wide variety of options

– Cable attachment plates

– Drum plate enlargers

– Equipment mounting brackets

• Easy access to cables and patchcords during

installation, maintenance and upgrade

• Easy adaptation to specific applications by variation of the rack configuration, the shelf configuration and routings of patchcords


– Stand-alone

– Wall mounting

– Back-to-back mounting

– Multiple side-to-side mounting

• Available with metal or transparent doors

Cabinets & Racks


• Cable attachment plate with C-profile included

• Installer friendly wall attachment kit

• Offers dust-proof, environmental and mechanical

protection for the fibre management functions

• Integrated fibre, pigtail and cable management

The unit has the following features:• Accommodates FIST splicing and patching sub-

racks and horizontal patchcord management

modules

• Metal compact housing with 2 front doors and

swing handle with lock and key

• Field adaptive mounting profiles to 19” or ETSI width

• Extensive cable inlet/outlet possibilities on top and bottom, left and right: breakout ports for cable and

pigtail seals

FIST-Wall RackThe FIST wall-mountable rack is a unique sealed physical fibre management system that is designed to be used in an exchange, head end or customer premises environment. It is typically used in vault applications to splice outdoor cable to indoor cable, but it can as well be used as ODF for limited fibre counts.

Cabinets & Racks


Passcomm Box on Post Features• Enclosure Size (WDH)

454x170x812mm• IP55 rated

• Post length of 790mm

• Material Chrome Steel (3CR12)

• Enclosure Weight: 25kg

• Post Weight: 15kg


• Angled back roof

• Door hold back bar to 120°

• 3 Lock positions, 2 pre-installed

with Triangular locks and a third for

customer specified locking mechanism• Document holder provided


• Gland plate pre-drilled to suit up to 30 pair cable

and 10 cable spurs

• Protected cable entry and exit through easily removable covered base

• The enclosure can be easily removed from the

post for ease of transit

• A pre-cut sealing gasket to suit the post footprint is

supplied, providing an external seal for the base• Base mounting holes to suit Line side Base

CAB-BASE-LSTP

The Passcomm BOP is a high quality, lightweight

exterior Box On Post specially designed for trackside telecomm and signaling use.

Both the BOP enclosure and post are manufactured

from corrosion resistant chrome steel (3CR12) of

all welded construction. The use of high chromium,

corrosion resistant steels throughout the construction,

provides operational life expectancy in excess of 20 years with limited maintenance.

The finish is polyester powder coated colour BS4800:00A07 and is provided for decorative

purposes.

The BOP enclosure offers three DIN rail vertical

mountings, each of which provides a maximum capacity of up to 30 Mondragon VX connectors. Each

DIN rail vertical mounting is provided with a label

holder for identification purposes. Wire management is maintained by the use of both betaduct trunking

and evenly spaced jumper rings. All enclosure metal

parts are bonded. The enclosure door offers 3 point

locking and has a full door length stainless steel

piano hinge for added security. The door also opens

to 180° for easy access. The roof is angled back,

which aids in the prevention of water dripping into the

enclosure whilst the door is open. The base blanking

plate is pre-drilled with three main cable ports and 10

spur cable ports.

Passcomm BoP Range OverviewThe Box on Post is a Passcomm manufactured product, originally designed for lineside telephone connectivity applications where a full or half loc cabinet is not required (i.e. for applications that require 30

pairs or fewer). Due to its size and weight, it is easier and quicker to deliver to site and install.

Following the success of the Copper BoP, Passcomm has since developed a Fibre BoP which is designed

to house PoE switchgear that powers VoIP lineside telephones.

Passcomm BoP-DThe Passcomm BOP-D is a deeper and wider variant

of the standard BoP. The BOP-D features a pitched

roof, designed to offer protection against solar gain.

The Passcomm BOP-D is designed to accommodate

up to 2x Cisco IE4000 switches.The Passcomm BOP-D can be pre-kitted and and

pre-tailed to your project specific requirements.

• Enclosure Size (WDH):

550x275x1667m (inc post) • Material: 4003 Stainless Steel

• Pitched solar shield roof

• Adapter bracket available to suit

standard half loc base

Part Number Box - CAB-BOP-D275 Post – CAB-BOP-POST-D275

Cabinets & Racks


XC Cabinet OverviewThe cabinet is designed as a

flexible housing to suit both current and future needs. It

accommodates this flexibility by providing for alternative pre-

configured and interchangeable mountings to suit requirements.

Other configurations are also easily accommodated

depending upon requirements.

Features• Cross Connect 208 pairs

with 104 Pairs per side (Using CommScope VX

Connectors)

• IDC Cross Connect 1500 Pairs (Using Krone 237a

LSA-Plus Connectors)

• Enclosure Size (WDH) 580x500x1805mm• Up to 28/29 U-spaces available• Tested to BS EN 60529 IP55








• Protected cable entry and exit through base• A pre-cut sealing gasket to suit the base footprint

is supplied

XC with GCO2 Flat FISTThe XC with GCO2 is a copper

and fibre combined cabinet. The copper connects can be accessed

from one door and the Unistrut

mounted FIST-GCO2 can be

accessed, spliced and jointed

from the opposite site.

This provides total flexibility for the number of cable entries, number

of splices and differing cable

sizes which may be required. The

GCO2 has capacity for up to:

Single Circuit Splicing: 224 splices on 112 trays

Single Element Splicing: 144 splices on 12 trays

In many locations, this configuration of the XCNR1 removes the need for a trackside pit.

• Enclosure Size (WDH) 580x500x1805mm• Tested to BS EN 60529 IP55








• Protected cable entry and exit through base• A pre-cut sealing gasket to suit the base footprint

is supplied

XC with BUDISimilarly to the XC with GCO2, the

XC with BUDI utilises both sides

of the XC cabinet to provide both

a copper and fibre interface for trackside telecoms and signalling

locations.

The CommScope BUDI-M is

marine-ply mounted in the cabinet

and provides capacity for up to

144 splices (single element) and

provides space for a cable loop.

• Enclosure Size (WDH) 580x500x1805mm• Tested to BS EN 60529 IP55




• Door hold back bar to minimum of 110 degrees




• Protected cable entry and exit through base• A pre-cut sealing gasket to suit the base footprint is supplied

Cabinets & Racks



Passcomm offer a wide range of flexible options for Stainless Steel Closures. Assembled on-site at

the Passcomm manufacturing facility in Warrington,

bespoke stainless steel closures can be pre-

drilled, pre-wired and pre-terminated to your exact requirements.

Passcomm supply Stainless Steel Closures that

utilise the FIST management system used by BT

and approved for use by Network Rail. This offers

ultimate flexibility of both connector type and cable capacity.

Offering a wide range of sizes, locking mechanisms,

gland plates, backmount plates, ‘express’ loop-through cabling as well as LC/PC and SC/APC connectorisation, Passcomm are well equipped to

design and manufacture to your specific brief.

Cabinets & Racks


Designed for the particular needs of outside broadcasting from

permanent locations, e.g. race tracks and football grounds,

these cabinets provide facilities for rapid temporary connection

to fibre optic data networks inside a secure enclosure.The robust 16U 19” Swing Frame, opens to provide access to

the rear mounted backboard and five socket RCB protected Power Distribution Unit. The Swing Frame itself is pre-fitted with space for fitting a further two. Twin fibre tubes, ready laid for making the installation of internal fibres as painless as possible.The Type 2 cabinet features an external cable access box. Allowing external cables to be quickly connected to equipment inside the cabinet, then allowing the cabinet door to be

secured over the installed cables. When not required the box incorporates a shutter to prevent access by rodents.

Cabinets are supplied with a 19” rack mount frame (16U capacity). The frame is designed to hold up to

100kg of equipment and hinges on the left hand side to allow easy access to the rear of the equipment.

The frame has integral cable management features in order to hold cabling secure when the swing rack is

opened.

OrderingType Part No.

c/w 2 fans

Part No.

c/w 3 fans

Multimedia

Type 1 (Green)

CAB-19S2M1-16UG CAB-19S3M1-16UG

Multimedia

Type 1 (Black)

CAB-19S2M1-16UK CAB-19S3M1-16UK

Multimedia

Type 2 (Black

c/w cable entry door)

CAB-19S2M2-16UK CAB-19S3M2-16UK

Keys CAB-19S-KEY

Construction and DimensionsShell 3mm

Aluminium

Size Overall

(W x H x D)728 x 1220 x 545mm

Root 3mm Chrome

Steel

Height (after

installation)

Approx 1000mm

Finish Polyester

powder-

Standard

colours green

and black

Door

Aperture

640 x 840mm

Security

Standard

Heavy duty

Stainless

Steel,

19” Rack 16U, fitted with fibre tubing and

splice tray.

Security

Optional

Provision for:-

Secondary

security locks

and padlocks.

Backboard 20mm Marine

Ply. 650 x 800mm in

rear

Ventilation Low level

louvers and

two/three fans in top

Other fittings 5 way 8 Amp

RCB socket

block. Space

for LEB fused

outlet

Equipment Mounting (Backboards)

For further flexibility in mounting equipment, a marine ply backboard (800mm high x 650mm wide) is also supplied. All wooden boards are pretreated for fire resistance to BS476 Part 7:1971

An 8 Amp RCB protected five way socket block is fitted on the right hand side. The block is pre-terminated for installation into a Local Electricity

Board supplied fused outlet (space provided).

The cabinet has capacity for up to 3 standard cable

entry ducts.

Multimedia Cabinet

Cabinets & Racks


Passcomm Anti-Vandal Telephone CabinetFeatures• Enclosure Size (WDH) 310 x 230 x 450mm• Material Chrome Steel (3CR12)


• Angled back roof

• Accepts BR No.1 door lock

• IP54 rating

The anti-vandal telephone cabinet is designed

for housing emergency telephone units in

exposed locations, offering a high degree of weather protection and resistance to

vandalism.

The

cabinet is

suitable for

installation

on wall, pole

or post and

can accept

a variety of

emergency

phone

types.

ConstructionThe anti-vandal telephone cabinet is manufactured from

welded chrome steel (3CR12) with reinforcements in key

areas.

Size and Exterior AppearanceExternal dimensions (WDH) 310x230x450mm nominal. Unit has a flush fit door with cabinet sides; base and roof extended to provide weather protection and improved resistance to vandal attack. The hinged door is secured by

the standard British Rail No. 1 corridor door lock. The door

is fitted with a spring assisted self-closing feature and a permanently fixed handle. Door lock keyhole is fitted with a light steel shroud to assist location in darkness. The Roof

section has a light rear-facing incline for forced water run

off. Overall weather protection to IP54.

InternalThe cabinet is fitted with a standard removable mounting plate capable of supporting a variety of telephone units.

The mounting plate leans backwards to ensure that the

telephone is firmly located when not in use.

SecurityThe cabinet was designed to withstand a vandal attack

to LPS1175 category B. There are no externally visible fastenings. Welded steel brackets reinforce the door and

cabinet hinged face. Flush door provides protection from

leverage.

Cage NutsStandard cage nuts for use with

19” and ETSI rack mounts.

Conversion BracketsConversion brackets are available to enable 19”

equipment to be housed in either 21” or ETSI racks.

Brackets are available in various heights to suit

different equipment types.

Part Number ACC-M4-CN (pack of 100)

Part Number ACC-M6-CNB-100 (pack of 100)

Part Number HT-EXT-CN

Part Number ACC-19/21-nU (where n = height in U)ACC-9/E-nU (where n = height in U)

Cage Nut and Panel Screw Kit

Cage Nut Extraction ToolSmall hand held tool to aid in the extraction of the cage nuts from racks.

Accessories

Cage nut, panel screw and washer kit.

For use with 19” and ETSI rack mounts.

Passive Optical LAN


Section 6Passive Optical LAN

Passive Optical LAN


Passive optical LANs are significantly faster, more efficient, sustainable, cost effective, scalable and more adaptable to future requirements than traditional

copper-based infrastructure. Optical LANs remove

the distance constraints, power requirements and

heat dispersion issues associated with copper. They

deliver increased network security, performance and

operational efficiency. There is no doubt that this is the future of network

connectivity.

Passcomm has supplied the passive equipment

to connect 1000+ customers to Optical LANs that

deliver five key advantages over legacy copper LAN technologies.

• Simple

• Secure

• Scalable

• Stable

• Smart

SimpleOptical LANs are simpler than copper. There is

less equipment and cabling to house and maintain.

Centralized management makes changes easier,

faster and more cost effective. Fibre has the ability

to converge multiple services into one medium

dramatically simplifies operations. Optical LANs remove the need for expensive, power hungry switchgear.

SecureOptical LAN’s are immune to electromagnetic, radio

frequency and electromagnetic pulse interference

and far less susceptible to intrusion than copper.

ScalableOptical LANs’ endpoint capacity surpasses copper

by a factor of four. Single-mode fibre cable used in optical LANs can reach 30 kilometres without signal

regeneration. Superior density and reach, combined

with lower installation costs, mean maximum scalability.

StableOptical LAN’s typically deliver carrier-class 99.999

percent availability. Redundancy and distribution

network options further protect availability. And optical

cabling is futureproof, with the bandwidth to support

migration to next-gen technologies without requiring replacement.

SmartFewer electronics, less cabling, no telecom closets

and lower power consumption mean reduced network

costs. Greater density and reach along with future-

proof cable bandwidth mean scalability to meet future

needs.

Overview – What is Passive Optical LAN?Passive Optical LAN is a revolution in local area networking!

Sometimes referred to as Fibre LAN, PO-LAN is the future of local area connectivity. Using new, pliable fibre optic cables PO-LAN can replace or even work alongside current copper LAN infrastructures.

Based around GPON (Gigabit Passive Optical Network) technology P-LAN provides a secure, future proof,

resilient, low management high performance network.

Over the last ten years GPON technology has been deployed to millions of users around the world to

provide voice, video and data services. This highly efficient network architecture ensures that a wide range of services can be accessed by users as quickly as possible (at the speed of light) without adversely

impacting other users.

Optical LANs: A transformative solution for a connected future

Passive Optical LAN


Applications Multi-floor Office/Building Complex PO-LAN is well positioned to provide bandwidth relief as new

applications to the desktop continue to explode and the emerging “Cloud-Computing” environment

threatens to further restrict already clogged

LAN networks. Similarly, new graphic intensive

applications, video sharing and editing all place new

constraints on the Legacy Copper Switched LAN.

Multi-building Campus Multi-Building Campus

environments, where distance and operational cost

are major considerations for delivering voice, video

and high speed data, PO-LAN is the optimal solution!

Multi-floor: Hotel In the Hospitality Industry where space is limited and demands for High Speed

Internet Access, Voice, Television and Security

monitoring is increasing, PO-LAN provides optimal

performance characteristics for the preferred LAN

infrastructure.

Multi-building – Harsh – Environment - Industrial/Factory Complex) Developed for Industrial, Factory or other harsh environments where high speed data,

voice and security cameras are mandatory, but

space, cooling and power are limited as PO-LAN

provides Passive Optical Splitters – suited for any

environment.

Why Fibre Vs. Copper? • Advances in technology never stop moving, from

simple handheld personal devices, to computers,

to company network architectures

• Keeping pace with these advances has led to

networks packed with an array of racks, wires,

patch panels and switches

• Designing a new network infrastructure or

refurbishing your existing network is a significant investment. Traditional network designs carry

an array of considerations; capacity, efficiency, security, scalability, capital investment and green

initiatives

• Fibre has demonstrably superior performance

• Smaller or Reduced Footprint (Equipment is much

smaller)

• Fibre is Greener than Copper

• Greater Distance (up to 12 miles)

• Fibre is Less Expensive than Copper-wire • Unmatched Security

• Fibre has a much smaller Cable Diameter

(Significantly harder to tap than copper) • Fibre has no cross-talk

A high performance fibre optic network has been successfully

installed and commissioned within

an old four storey building in central

London, which initially housed

forty five small businesses in self-contained, secure offices. Using passive optic equipment

supplied by Passcomm, the network

provides secure, future proof high speed connectivity

for voice, video and data traffic to each individual business.

The user devices such as PCs, lap tops, tablets

and smartphones are connected to the service via

dedicated copper or wireless interfaces.

Each business is provided with a specific guaranteed symmetric connection speed of between 30Mb/s and 1Gb/s depending upon their specific needs. Since the initial installation, a further fifteen businesses have been added onto this network with a projected

Case Studies BBC UGLI Building – Central London

total of eighty businesses when the building is fully

re-occupied.

By using OLT’s and ONU’s, all switchgear is removed

from the network. This has significant effects on the network design and costs.

• Up to 75% reduction in CapEx costs• Removes requirement for Air Conditioned Comms

Rooms (up to 85% saving on power).

• Space requirements cut by up to 92%.

• Passive equipment does not require mains power

Passive Optical LAN


OLT An optical line terminal (OLT) is a device that is located at the service provider’s central office and is the endpoint of a passive optical network (PON).

The Building Blocks of an Optical LAN

Fibre Network CableThe cable used in P-LAN networks is

bend-insensitive G657A1+ All-Wave. This provides

low-loss and great usability for installers.

ONT and Optical SplitterOptical Network Terminal (ONT) is a device that is located at the customer/end-user location. The fibres are terminated at this location and each ONT provides Gigabit connectivity to the end-user. The optical splitter

can be 32 or 64-way depending on the number of end-users.

Test Equipment and Tools


Section 7Test Equipment and ToolsContents

Fibre Testers

Copper Testers

Network Testers

Telecom Testers

Fusion Splicers

Fibre Cleavers

Tool Kits

Tooling Equipment



Fibre TestersIdeal Networks - OTDR II Fibre Tester

The Ideal Networks OTDR II is the first tablet inspired OTDR that is handy, lightweight and rugged enough

for any environment.

• 7-inch, outdoor-enhanced touchscreen

• Dynamic range of up to 36 dB in SM and 29 dB in

MM

• iOLM: Converts complex graphs into easy to read diagrams

• Pass/Fail status for each eventThe most efficient hand held display in the industry, delivering an unprecedented user experience. Its intuitive user interface including on-board manual

ensures a fast learning curve for the user. Plus, its

new and improved OTDR platform offers icon-based

functions, instant boot-up, automatic macrobend

finders as well as improved auto and real-time modes.

Ideal Networks FibreMeter - Light Source and Power MeterQuickly measures cabling loss

(dB) with calibration feature

• Measures fibre optic power for troubleshooting

• Universal/FC power meter connectors

• Interchangeable light source

SC/ST/FC connectors• Multi-mode and single mode

options

The IDEAL FiberMASTER™

fibre optic testing kit allows the user to measure absolute

power and calculate the loss

of fibre optic links at several wavelengths.

Absolute power measurements

are helpful when trouble

shooting equipment that may

not be operating properly.

The dB calibration feature

allows the operator to set a

reference level to the light

source and directly read the loss of fibre optic links without needing to manually calculate the values.

The unique form factor allows the light source to be

docked neatly within the power meter. This makes

the kit compact for easy storage while still allowing

full operation of both the source and meter.

Passcomm offers a wide range of test equipment, fibre splicing tools and accessories. As UK channel partner for Ideal Networks, Ilsintech and Greenlee, Passcomm is well placed to provide cutting edge

precision test equipment and tools whilst offering great value.

Passcomm staff are on-hand to facilitate product trials, product demonstrations and both web-based and

face-to-face technical support from both manufacturers should you require.

To find out more about these products, contact our Sales team today on 01925 821333.



Ideal Networks Fibre Optic Visible Fault Finder

• Visually identifies and locates faults in fibre optic cabling

• 2.5mm universal adaptor for all ST, SC and

FC connectors

• Useful over a distance of 5km (3 miles)

• Up to 80 hours of

operation

• Ruggedised aluminium

body

The Visual Fault Finder is a

visible laser light source used to

check continuity, locate breaks,

poor mechanical splices and

damaged connectors in fibre optic cabling.

Used to verify continuity, test

and find breaks in fibre links, locate pinched fibre strands in termination cabinets, or

anywhere fibre optic cables are terminated and subject to

mechanical damage.

The VFF5 is also an excellent aide to technicians terminating

mechanical splices or pre-

polished connectors where

leaking light is an indicator of

a poor fibre cleave or other misalignment.

Ideal Networks FibreTek III – Cable Certifier

• Attenuation/insertion loss (dB) measurement

• Multimode and single-mode options

• Encircled Flux compliant (optional)

• Built-in visible light source for troubleshooting

• Full Tier 1 fibre certification

• Complies with TIA/ISO/IEC

• FiberTEK III adapters are used with LanTEK

III for fast and simple certification of high bandwidth single-mode and multimode fibre optic cabling including support for encircled

flux testing (optional)

• To pinpoint fibre cabling faults every FiberTEK III adapter includes a built-in visible

light source to help you visually pinpoint

faults and locate fibre ports

• FiberTEK III provides optical loss (dB)

measurements meeting Tier 1 certification requirements

• Available in multi-mode (850/1300nm) and single mode (1310/1550nm) varieties



Copper TestersIdeal Networks VDV II Copper Cable Verifier

Ideal Networks SignalTEK-CT

• Advanced wiremapping with TDR fault location

• Gigabit performance test to the IEEE802.3ab

Ethernet standard

• Automatic generation of PDF reports

• Report upload to USB memory stick without a PC

If you install or maintain data cabling, SignalTEK CT

allows you to generate PDF test reports that prove

installed links run at Gigabit Ethernet transmission

rates.

For installers, this means having a cost-effective way

to demonstrate that the copper cabling was installed

correctly and is capable of supporting Ethernet

applications. By proving real world performance,

SignalTEK CT confirms a professional job - reducing the risk of call backs.

SignalTEK CT also gives network owners the

assurance that installed cabling will support

bandwidth hungry services like VoIP, IP CCTV and

video streaming following moves, adds and changes.

SignalTEK CT automatically generates test

reports in PDF or CSV format. Use the free IDEAL

AnyWARETM app from IDEAL Networks to view

/ send data cable and network test reports to colleagues and clients anywhere.

The hassle of connecting to local Wi-Fi is eliminated

to provide a superior user experience, because the IDEAL tester serves as Wi-Fi hotspot.

• Measures cable length

• Provides distance to fault (TDR)

• Identifies wiring errors instantly• Determines services running: ISDN, PBX and PoE

The new VDV II Series are easy to use cable testers

that check the integrity of copper cables commonly

found in domestic, commercial or industrial voice,

data or video installations, including telephone wiring,

data network and video/security cabling.

Employing state-of-the-art technology, VDV II offers

functionality not previously available in a wiremapper.

The advanced wiremap engine accurately displays

complex wiring faults instantaneously whilst TDR (Time Domain Reflectometry) aids troubleshooting and improves on-site productivity.



Ideal Networks – LanTEK III Series

Network TestersIdeal Networks – SignalTEK – NT

• New permanent link adapter saves money

• Send test data anywhere using IDEAL AnyWARE

app

• Certifies multimode and single-mode fibre (optional)

• Professional PDF reports with free software

• Certifies twisted pair cabling to TIA/ISO standards• New troubleshooting features that save time

and money – Locate hidden connections, splices

and cable faults using Time Domain Return Loss

(TDRL) and Time Domain Crosstalk (TDX)

• New permanent link adapter saves money –

Reduce down time and lower maintenance costs

with field replaceable RJ45 contacts• New FiberTEK III modules – Tier 1 certification

of fibre cabling eliminates the need for additional fibre testers. Available on 500MHz and 1000MHz models

• Industry leading battery life – 18 hours of

continuous testing without interruption

• New test data software – Create powerful client

reports quickly and easily from multiple testers

using one PC application

• Gigabit performance testing on passive cabling

and active networks

• Generates test reports to IEEE 802.3ab standard

• Simulates VoIP/CCTV/Web/IP video network traffic

• Tests connection speed, port ID, ping, traceroute,

IPv4/IPv6

• Advanced PoE/PoE+ testing

If you install, maintain or troubleshoot data cabling

and Ethernet networks, SignalTEK NT allows you

to prove the performance up to Gigabit Ethernet

transmission rates. By simulating actual network

traffic users are able to test and document network and data cable performance to Gigabit Ethernet

standards. Where system warranties are not required

the SignalTEK NT is a cost effective way of proving

your copper and fibre networks provide error-free performance.



Ideal Networks – NaviTEK – NT

• Network troubleshooter (copper/fibre)• PoE, service detection and port information

• Real time display of network traffic• Test storage and PDF reporting

• Cable tracing/distance to fault (TDR)The new NaviTEK NT is a network tester for

troubleshooting and maintenance of active and

passive copper and fibre networks. Incorporating an improved graphical interface NaviTEK NT

allows network technicians to pinpoint and solve

network connectivity issues faster than ever before.

Subsequently, tests can be saved as pdf reports and

shared with colleagues and clients using the free

IDEAL AnyWare™ app.

LAN – Xplorer PRO

LanXPLORER Pro is a hand held tester for analysing

and diagnosing problems in networks, cabling and

Ethernet devices using copper, fibre and Wi-Fi interfaces.

Using the LanXPLORER Pro in-line and end point

modes, IT Technicians can pinpoint issues that are

unable to be found with management software as it

physically connects to the point of interest instead of

scanning the entire network.

LanXPLORER Pro does not examine the contents of the data being analysed therefore personal and

confidential information will remain confidential.



Telecom Testers

Carrier users

• Telco, cable TV, broadband, metro Ethernet WAN

and leased line service providers

• Mobile network operators

• Data centres

Enterprise users:

• Managers of public utility, industrial, transportation,

health care, education and financial networks• LAN installation and maintenance personnel

• System integrators

Ideal Networks – UniPro MGig1 Series

• Ethernet transmission tester for carrier and

enterprise networks

• Comprehensive in-line network monitoring

• Simplified set-up of target devices, services and tests

• RFC2544, BERT, SLA-Tick and Y.1564 (NetSAM)

• Simultaneous testing of multiple services

• QoS tests - multiple VLAN (QinQ), MPLS, ToS and

DSCP

Designed for comprehensive turn-up testing,

monitoring and troubleshooting of fixed line, mobile, microwave and wireless carrier Ethernet links.

UniPRO MGig1 is suitable for use on any backhaul

link at speeds of up to 1 Gb/s.

UniPRO MGig1 allows enterprise users to monitor

the actual bandwidth and performance compared to

the agreed service levels from the service provider.

It can also be used to stress test and monitor the

performance of LAN backbone links.



The K11 splicer is the most advanced and best

performing core-to-core alignment machine. Ideal for

medium and long range optical circuits, LAN, CATV

and FTTx with minimum loss. With a compact, light, rugged design and long life battery, it delivers high

precision performance. Furthermore the 5 inch colour

monitor with touch screen offers users a much more

convenient and efficient working process.

Features and BenefitsInternet remote access maintenance

IPAAS Technology Basis Core Alignment

• K11 is the core alignment splicer based on the

IPAAS (Image Pattern Analysis Alignment System)

Technology. The fine pixel technology perfects lowest splice loss average

Compact, Lightweight and FastThis splicer is one of the smallest, lightest and fastest

among all the existing core alignment splicers.

Dimension: 143(W) x 163(L) x 140(H)

• Weight: 2.25kg

• Splicing Time: 6 seconds

• Tube heat: 9sec (IS-45 Sleeve, IS-45mode),

13sec (IS-60 Sleeve, IS-60mode)

Resistance to Shock, Dust and Water

The splicer has stable performance even in a

harshest of environments

• Shock-Free Fall : 76cm from 5 sides

• Waterproof : IPx2• Dust-proof : IP5x

Powerful Lithium Polymer Battery with Large Capacity• Performs 300 cycles of fusion splicing and sleeve

heating with the standard battery

5 inch Colour LCD Monitor with Touch Screen• Magnification : 200X, Max 400X• For user’s convenience, LCD monitor has been

designed with touch screen in addition to the

standard keys

• Bi-directional Operation System

• Depending on the user’s preference, the screen

can be rotated for easier viewing

Equipped with Sleeve Loader to Prevent Contamination and to Provide Convenience• While working in a manhole, the loader prevents

the supplementary sleeve from falling and being

contaminated

• Working in aerial space such as telephone pole,

the loader also prevents the supplementary sleeve

from falling down

Auto-Calibration• Detects the surrounding environment for

temperature, humidity, air pressure and measures

discharge calibration rate automatically

Ilsintech offer a comprehensive range of fusion splicers and the associated cleavers and accessories.

Ilsintech Splicers are designed to operate with ultimate efficiency, in the harshest environments.

K11

Ilsintech K11 Fusion Splicer



Ilsintech S5 Fusion Splicer Features and Benefits• Remote Internet maintenance

• Integrated - 5 functions in one

unit (Stripping, Cleaning,

Cleaving, Splicing and

Protecting)

• 4.3 inch

Colour

LCD

monitor

with touch

screen and

bidirectional

operation

• Powerful Lithium

Polymer battery with large

capacity

• Resistance to shock, dust and

water

• Built-in dual-sleeve heater

• IPAAS Technology based Core Alignment

• Compatible with Fusion Splice-On Connector

(SOC) in accordance with the industrial standard

Ilsintech KF4 Fusion Splicer The KF4 is versatile and

super accurate

active cladding

alignment fusion

splicer. It is slim,

yet rugged and

extremely light. The budget priced KF4 assures

users of a simple and stable

splicer with high performance.

Features and Benefits• Compact, Lightweight and Convenient

• Best Active Cladding Alignment fusion splicer with

slim and light form factor

Size: 124(W) × 189(L) × 75(H) mm

Weight: 1.1 kg (Including battery)

• Splicing time: 7 sec

Heating: 13 sec (IS-60 mode, IS-60 sleeve)

• Resistance to Shock, Dust and Water

The splicer has stable performance even in the

harshest environments.

Shock – Free Fall : 76cm

Waterproof: IPx2

Dust-proof: IP5x• Resistance Wide LCD: 4.3 inch

Crystal clear and wide 4.3″ LCD

Ilsintech KF4A Fusion SplicerThe KF4A is a highly advanced and accurate ACTIVE

cladding alignment fusion splicer, which has been

designed to perform the major 5 multi-function

features systematically: stripping, cleaning, cleaving,

splicing and sleeving. (ALLINONE) The KF4A is

the best fit for fusion splicing and fusion Splice-On Connector (SOC) for FTTx network applications, which eliminates fatal issues with conventional

mechanical connectors (low quality, weak durability

and high maintenance cost). The KF4A + fusion

Splice-On-Connector gives our customers the best

ROI.

KF4A

KF4

S5



Ilsintech R5 Fusion Splicer The Swift R5’s simple and user-friendly design

enables users to splice quickly and conveniently

throughout the 5 processes; stripping, cleaning,

cleaving, splicing & sleeving –

ALLINONE. Also, the Swift

R5’s thermal automatic

stripper eliminates

scratches on the

fibre surface, whereas

a manual

stripper

can leave

scratches

on the fibre, which can lead

to problems over time.

Features and

BenefitsStripping

• No scratches from heated stripping

• Over one million life cycles of the motor

• Over 5kg/f Tensile Strength of fibre after strippingCleaning

• One-touch pump

• Easy to refill cleaning alcohol

Cleaving

• Single-action cleaving

• Fibre sharps collector attached

• Maintenance via remote internet access

4.3-inch Colour LCD Monitor with Touch Screen

• Magnification: 20X • User-friendly and ergonomically designed by

navigational touch screen

Resistance to Shock, Dust and Water

• The splicer has excellent reliability with stable performance even in the harshest of environments

• Waterproof: IPx2• Dust-proof: IP5x• Shock: 76cm from 5 sides

Powerful Lithium Polymer Battery with Large

Capacity

• More than 320 splices and heatshrink sleeving

operations on a full charge

• Equipped with Splice Protector Loader to Prevent

Contamination and to Provide Convenience

• Prevents the supplementary sleeve from

contamination and falling

Built-in Dual Sleeve Heater

• Productivity can be improved by up to 30% due to

the simple & user-friendly design

• The dual-heater can work for both Fibre to Fibre

and Fibre to Splice-on-Connector

The clad-to-clad KF2A is budget priced member of

the All-In-One family giving users all the benefits of All-In-One at affordable price. By its very nature the

KF2A fusion splicer makes working on Fusion Splice

On Connector termination extremely easy.

Ilsintech KF2A Fusion Splicer



Equipped with Sleeve Loader to Prevent

Contamination and to Provide Convenience

• While working in a manhole, the loader prevents

the supplementary sleeve from falling and being

contaminated

• Working in aerial space such as telephone pole,

the loader also prevents the supplementary

sleeve from falling down

Built-in Dual Sleeve Heater

• Productivity can be increased up to 30% due to the

simple & user-friendly design

• The dual-heater can work for both fibre to fibre and fibre to Swift Connector

Auto-Calibration

• Detects the surrounding environment for

temperature, humidity and air pressure, then

measures discharge calibration rate automatically

Features and BenefitsRemote web access maintenance

• User friendly GUI

Resistance to Shock, Dust and Water. The high

reliability splicer has stable performance even in

the harshest environments

• Shock-Free Fall: 76cm from 5 sides

• Waterproof: IPx2• Dust-proof: IP5xPowerful Lithium Polymer Battery with Large

Capacity

• Performs 200 cycles of fusion splicing and sleeve

heating with the standard battery

4.3-inch Colour LCD Monitor with Touch Screen

• Magnification: 20X, MAX 55X• For convenience, the LCD monitor has been

designed with touch screen in addition to the

normal operating buttons

Bidirectional Operation System

• Depending on the user’s preference, the screen

can be rotated for easier viewing

Ilsintech KR7 Ribbon Fusion Splicer



Fibre CleaversIlsintech Swift CI-01 Fibre Cleaver • Stable operation –

Step-Action

process

• Compact design

• High precision

blade with 16 cleave

channel

Specification• Fibre Diameter: 125µm

• Coating Diameter: 250 ~ 900µm

• Cleave Angle: 90° ± 0.5°

• Cleave Length: Single 5mm to 16mm

(coated fibre ≤ 250 µm) Single 10mm ~ 16mm

• Blade Lifetime: 50,000

• Dimensions: 58 x 55 x 48mm• Weight: 340g

Ilsintech Swift CI-02 Fibre Cleaver• Long life cycle with double

bearing system

• Oil damper system

• Fully automatic action

for cleaving and

collecting fibre sharps






• Single 10mm ~ 16mm



• Single action for

cleaving (fully

automatic)


• Compact design

• Specification• Fibre Diameter:

125µm

• Coating Diameter:

250 ~ 900µm

Part Number TES-CI-03A

Part Number TES-CI-01 Part Number TES-CI-02

Ilsintech Swift CI-03A Fibre Cleaver• Cleave Angle: 90° ± 0.5°



Ribbon 10mm





Ilsintech Swift CI-03B Fibre Cleaver • Fully automatic action for cleaving and collecting

fibre sharps• Oil damper system

• High precision blade

with 16 cleave

channels






Ribbon 10mm



Part Number TES-CI-03B Part Number TES-CI-06

Part Number TES-CI-08

Ilsintech Swift CI-06 Fibre Cleaver

Specification• Coating Diameter: 250 ~ 900 µm

• Cleave life: 2,000


Ilsintech Swift CI-08 Fibre Cleaver

• Typical cleaving angle deviation: 6° ~ 9°


• One touch for tension, twisting and cleaving


• Coating Diameter: 250 ~ 900 µm

• Cleave angle: 6° ~ 9°

• Blade life time: 30,000




Tool KitsConnector Cleaning KitSmall kit for the cleaning of fibre connectors containing the following:

• Solvent Dispenser

• Aero Duster

• Lint Free Cloths

• Lint Free Cleaning

Sticks

• Carrying Pouch

Part Number KIT-CCK-01

Fibre Cable Prep KitContains sufficient tools to enable

most optical fibre telecoms cables to

be prepared

ready for

jointing and

terminating.

Contains


• Junior Hacksaw


• Cleaning Cloths

• Adjustable Wrench

• Fibre Strippers

• Side Cutters (Flush)

• Rotary Fibre Tube Cutter

• Central Strength Member Cutter

• Lockable Solvent Dispenser

• Sharps Bin

• Tape Measure

• Tool Carrier

Fibre Cleaning and Preparation Kit• Fibre Stripper – Primary Coating

• Lint Free Cloth (4” x 4”) – 100pk• Fibre Preparation Fluid 3oz

• Kabifix FK28 Cable Sheath Stripper 6/28mm

• Aramid Yarn

scissors

• Rotary Tube Cutter,

3.1mm tube diameter

• Canvas Carry Case

Part Number KIT-CPK-F-03

Copper Cable Preparation KitCable jointers tool bag which contains tools to enable

almost all copper cables to be prepared ready for

jointing and terminating.

Contains:


• Junior Hacksaw

• Circumferential Cable

• Stripper

• Cleaning Cloths

• Adjustable

Wrench

• Insulation

Strippers

• Insulated Screwdriver (cross-head)

• Insulated Screwdriver (flat blade)• Side Cutters (flush cut)• Tape Measure

• Electricians Scissors

• Tool Carrier

Part Number KIT-CPK-C-01Part Number KIT-CPK-F-01



Tooling EquipmentLong Nose Pliers150mm, 3 function, long

reach jaws.

Standard Pliers 175mm combination

pliers, 3 jaw

function.

Mains Test ScrewdriverTerminal screwdriver with mains test and

mains sensor indicator, c/w alkaline batteries.

Side CuttersDiagonal side

cutting pliers,

130mm,

angled jaw.

Part Number HT-SCF-130

Side CuttersDiagonal side cutting pliers, 150mm,

angled jaw.

Adjustable Pipe WrenchForged carbon steel, black phosphate

finish, 5 position slip joint head.

Part Number HT-LNP-150

Part Number HT-PLIERS-175

Part Number HT-MTS-01

Part Number HT-SCF-150

Part Number HT-APW-01

Part Number HT-LAW-240

Part Number HT-JHSAW-150

Part Number HT-SHSAW-300

Part Number HT-IS-0.15/1

Precision Lockable Adjustable Wrench240mm, double

grooved,

non-slip.

Junior Hacksaw152mm, epoxy finish, c/w blade.

HacksawHeavy duty,

die cast grip,

rectangular

frame, c/w blade.

Insulation StrippersWire insulation strippers for

wire sizes 0.15mm2

– 1mm2.



Trimming Knife Adjustable SpannerDrop forged carbon steel, 250mm,

polished steel finish.

150mm retractable blade, adjustable to 3 positions,

c/w blade.

Part Number HT-TKR-150

Part Number HT-ADS-250

Part Number HT-ISD-X

Part Number HT-BC-610

Part Number HT-ISD-F-100 (4mm x 100mm)HT-ISD-F-150 (6.5mm x 150mm)

Part Number HT-CSM-5

Part Number HT-SCI-M

Part Number HT-PC-3/30Part Number HT-SP12-6/22

Insulated ScrewdriversCross head insulated screwdriver,

1000v rated.

Insulated ScrewdriversFlat blade insulated

screwdrivers, 1000v

rated

Electrician’s ScissorsPair of electrician’s scissors,

for light materials cutting.

Spanner Set Twelve-piece spanner

set, from 6 – 22mm,

open ended and ring

spanner Chrome

vanadium mirrored

finish.

Allen Key Set8 hexagon key wrench set on ring, metric sizes

from 1.5 – 6.0mm

Part Number HT-AK8-1.5/6

Bolt Cutter61cm (24”) steel bolt cutter

Central Strength Member CutterScissor action

cutter suitable for

cutting steel strength members

up to 5mm diameter.

Pipe CuttersCapacity; 3mm – 30mm, gives a clean

square cut on thin wall copper, brass

or aluminium tubing.



Measuring WheelLightweight aluminium handle,

telescopic function, 14.2cm wheel

with PVC rim. Counter with re-

set button. Measures

up to 1000 metres.

Aramid Yarn ScissorsScissors for cutting aramid

yarns in optical cables.

Part Number HT-MW-1K

Part Number HT-TM-5

Part Number HT-TW

Part Number HT-FS-250

Part Number HT-SCI-K

Part Number HT-RTC-45-162

Part Number COS-LFC-4/4

Part Number HT-CS-01

Part Number COS-SB-01

Tape Measure5m lockable tape

measure

Digital Callipers

Measuring range 0 – 150mm

Resolution 0.1 – 0.01, 4-digit digital display,

includes silver oxide battery.

Part Number HT-DC-150

Tweezers

Stainless steel insulated fine tweezers.

Miller Stripper Miller

Stripper 10A,

for removing

primary and secondary

coatings from fibre.

Rotary Fibre Tube CutterIdeal Industries rotary fibre tube cutter.

Fibre ScribeCarbide scribe for fibre cleaving, specifically for test applications.

Sharps Bin250ml container for the safe

disposal of fibre sharps.

Lint Free ClothPacket of 100 lint free cloths,

100 x 100mm.



Cleaning ReelConnector cleaning reel for

optical fibre connectors. Replacement reels

available.

Fibre Cleaning SticksLint free cleaning sticks suitable

for optical fibre connectors and adaptors. Available in packs of

50.

Solvent DispenserLockable solvent dispenser

Lint Free TissuesPacket of 280 lint free tissues.

Part Number COS-IAW

Part Number COS-SD-01

Part Number HT-TSL-01

Part Number TES-CCR-01

Part Number TES-CCR-RR

Part Number COS-AD-300

Part Number HT-TC-370141

Part Number COS-LFT-4/8

Alcohol WipesIsopropyl alcohol impregnated

cleaning cloths.

Replacement Reels

Aero DusterCompressed dry air canister for light

dust removal.

Rehau Tube Splitter

Precision slitting tool for fibre tubes of diameter from 1.8 –

4.2mm. Allows the opening up of a

single fibre element.

Super Armoured Cable CutterPrecision tube steel cutter for removing

the steel fibre tubes from super armoured cable.

Part Number TES-ATK-SK-01 (1.25mm)

TES-ATK-SK-02 (2.5mm)



Crimping Pliers (Telsplice)CommScope

Telspilce ratchet

crimp tool.

Part Number CM-TS-FTN-RCT

Part Number CM-TS-FTN-CT

Part Number CM-IDC-K/S

Part Number HT-CCS-6/28-SB



Part Number HT-CCS-6/25-SB


Kabifix LK25 Cable Sheath Stripper• Constructed especially for optical

cable, coaxial and moisture-proof cables Ø 6 - 25mm (1”) in diameter

• Constructed also to cut plastic

tubing Ø 6 - 25mm (1”) in diameter

• Durable and accurate enough to cut

strong outer sheaths reinforced with aluminium

screening

• Circular and Longitudinal cutting

Telsplice Crimp ToolEconomy Telsplice crimp

tool.

Insertion Punchdown Tool – Krone Krone punch down insertion tool

for LSA range of 10pr IDC strips.

Kabifix FK28 Cable Sheath StripperHand-operated, easy to use, Cable

sheath O.D. range 6.0-28.0mm.

Safe and fast stripping even for

strong outer sheaths.

Replacement Blade

Replacement Blade

Cable De-Greasing Kit3M cable de-greasing bag, as

part of a self-contained kit to

allow efficient cable de-greasing.

Longitudinal Cable Stripper ‘Can Opener’ type sheath

stripper with easy action.

Replacement blades

available.

Part Number HT-KMS

HT-KMS- BLADE (Spare Blade)



Circumferential Cable Stripper Cable sheath stripper with

circumferential action.

Gas Torch KitGas torch kit including torch,

nozzles and gas hose.

Part Number T000030

Part Number HT-WN-01

Part Number CM-SK-E/9BM Part Number HT-GTK-01

Part Number CON-BFA-FP

Part Number HT-CCS-19/40 for 19mm – 40mm

Gas Nozzle ‘C’ Type gas nozzle

for heat-shrink

applications.

The Scotchlok E-9BM Crimping ToolWith adjustable jaw inserts,

crimps Scotchlok

discrete

connectors and

is a maintenance

tool for modular

splicing.

Bare Fibre AdapterThe bare fibre adapter is used as an interface between unconnected optical

fibre and test equipment. It allows for a temporary connection to be made

without the need for splicing on a

connectorised tail.

Bare Fibre Adapters are available in a

number of connector styles (FC/PC is the most common)

Portable WorkbenchStandard portable

workbench used

primarily on-site

for telecom cable

preparation

applications.

Part Number COS-CS-150

Cleaning Sheets Lint free cleaning sheets,

150 per box.

Highways Products


Section 8 Highways Products

Contents

Telecoms / Electrical Cabinet Integration

Tunnel Signage

Highways Products


Telecoms/Electrical Cabinet IntegrationPasscomm has a 5000 square foot factory in Warrington, Cheshire that delivers bespoke cabinet integration

for the rail and highways networks. The cabinets have a wide range of configurations, including electrical power distribution, copper cable terminations, pre-tailed and pre-terminated cabinets and pre-loaded optical

fibre termination racks.

For the highways network, Passcomm manufacture the complete range of Highways England / Transport For Scotland approved MCX Power and Fibre enclosures.

All cabinet and rack termination work takes place in a controlled, ISO-9000 accredited environment by

highly trained staff working against customer drawings and requirements. This significantly reduces expensive time required trackside and roadside on installations. Passcomm technical staff are available to visit project site locations to ensure the products are built to the required specifications.

All cabinets are supplied with all of the necessary accessories required for on-site install. This includes

tools, splicing equipment and Jointing Closures.

To discuss any projects you may have that require bespoke cabinets, please contact our Sales Team today

on 01925 821333.

MCX 0164 Power BoxThe pre-wired HE 0164

Escarpment Interface

(EI) wiring is to the

relevant MCX sheet

number using only

approved materials and

enclosures. Each enclosure

is fully tested to the correct

IEE Regulations and all test

records can be provided with

the cabinets.

MCX 0165 ‘A’-Side and MCX 0165 ‘B’ SideThe pre-wired HE 0165 Rural

Enclosure, with wiring of

both the ‘A’ and ‘B’ sides are

to the relevant MCX sheet

number using only approved

materials and enclosures. Each

enclosure is fully tested to the

correct IEE Regulations and all

test records can be provided

with the cabinets.

Highways Products


MCX 0489 Fibre ClosureThe MCX 0489 is

an above ground

Optical Fibre

enclosure for use

within a HE type

609 cabinet. The

enclosure adheres

fully to the HE

specification and is supplied with a full

kit of parts required

to install the

cables. The fibre cassettes are the

CommScope SOSA

variant.

MCX 0911 Gantry Mains Distribution BoxThe pre-

wired HA

MCX 0911 is

manufactured

to the relevant

MCX sheet

number, using

only approved

materials and

enclosures.

Each

enclosure is

fully tested to

the correct IEE

Regulations

and all test

records can be

provided with

the cabinets.

MCX 0170 Gantry and MCX 0170 CantileverThe pre-wired HE MCX 0170 Gantry and MCX 0170 Cantilever

are manufactured to the relevant MCX sheet number, using only

approved materials and enclosures. Each enclosure is fully tested to

the correct IEE Regulations and all test records can be provided with

the cabinets.

Highways Products


Highways England Copper Modem EnclosureTo be mounted in the HE post 75 cabinet

• Enclosure Dimensions (with lid): 465mm (H) x 232mm (W) x 96mm (D)

• Enclosure Material – 4003 Grade Stainless Steel – painted black

• Enclosure to be mounted on plinth to fit over 9902 power distribution box

• Access to 9902 through cut-out

Part Number HE-NRTS-CME-CXR

Part Number HE-NRTS-OSE-PMPart Number HE-NRTS-OSE-609

Highways England Optical Switch Enclosure for 609 CabinetUsed to house the Alcatel Lucent

Optical Switch (7210 SAS D) its

associated power supply, fibre splicing, CAT5E termination

a 230VAC and 12 -24VDC

connection capability.

• Enclosure size (with lid):

746mm (H) x 278mm (W) x 130mm (D)

• Enclosure Material:

Polycarbonate

• Clear lid for visibility of

internal components

Highways England Pole Mounted Optical Switch Enclosure

• Enclosure size (with lid):

746mm (H) x 278mm (W) x 130mm (D)

• Enclosure Material:

Polycarbonate

• Includes Solar Gain Shield

• Includes pole fitting straps

Highways Products


Tunnel Signage Passcomm, in conjunction with SPIE UK has developed a range of signage products for the tunnel

environment.

This includes; Wayfinders, Exit Signs, Tri Signs and Secret Signs. All signs are supplied with the necessary control panels associated with the complex SCADA systems that are used to run and maintain the safe traffic management of the tunnel.All materials used are selected in full consultation with the client to suit the environment and the specific project. This can include stainless steel, high impact glass-reinforced polyester and Low Smoke Zero

Halogen. Signs can either be wall mounted or recessed in tunnel reveals.

Incorporated in all Passcomm signage is the latest low-wattage, long-lifespan LED technology.

Passcomm Design and Engineering staff are available to visit project site locations to ensure local

conditions are accounted for in any designs, as well as assessing local power requirements. This also

allows Passcomm to design and manufacture to a schedule that creates minimal disruption in the tunnel

environment, during install and maintenance.

To discuss a tunnel signage project, call Passcomm Sales today on 01925 821333.

Passcomm has developed a slimline Wayfinder Emergency Exit sign, powered by the latest LED Technology, offering in excess of 50,000 continuous hours life.

The sign enclosure is manufactured to IP66

specification, in brushed stainless steel 316. Commonly the location of the sign demands a

shallow profile specifically designed to allow the enclosure to be sited near pedestrian walkways,

removing sharp edges and end faces. The sign has

been tested for light output in Candelas per metre

squared with a calibrated light meter to 600cd/m2.

These signs use less electricity than conventional

fluorescent fittings. These LED signs combine a large number of bright light-emitting diodes to illuminate the

sign from inside.

The sign detail is mounted on the inside face of

the clear polycarbonate sheet so as to remove any

possible damage from the aggressive cleaning

process.

Enclosure Specifications: • Enclosure IP rating: IP66

• Enclosure Material: 316 Stainless Steel, brushed

finish • Standard Enclosure Dimensions: (h):520mm x

(w):1230mm x (d)35mm • Weight (kitted): approximately 18kg• Graphics to: dft drawing NP2711.01

• Power consumption: approximately 32W (double aspect sign)

• LED lifetime: 50,000 hours continuous lighting

• Easy installation and removal of LED assembly

Mains supply voltage: 230-240Vac

Passcomm also manufactures Exit Signs with the following features:

• Triangular

• Reduced depth Triangular

• White Noise – directional sound is a broad band,

multi frequency broadcast that is easily located

by the human ear. The unit assists in identifying

evacuation routes in dense smoke

• Down-lighter

Passcomm Wayfinder – Emergency Exit Sign

Highways Products


Triangular Emergency Sign An Incoming

Call Beacon

sign

illuminated

by LED

technology,

complete

with xenon beacon to

indicate an

incoming call.

The sign

enclosure is

manufactured

to IP66

specification in stainless

steel 316 with

a brushed

finish.

The location

of this sign

demanded

a triangle

shaped

enclosure

to increase

visibility. The

sign has been

tested for light output in candelas per metre squared.

Also available are a combined Call Beacon / Fire Hydrant Indicator version and a version incorporating

a red flashing LED, to indicate emergency evacuation to the hard of hearing.

Enclosure Specifications: • Enclosure IP rating: IP66

• Enclosure Material: 316 Stainless Steel

• Enclosure weight (kitted): approximately 10kg

• Power consumption: approximately 20W/enclosure

Secret SignsPasscomm can manufacture any of the above

signage in ‘secret sign’ polycarbonate.

This provides the option for the signs to remain

unpowered until required, eliminating unnecessary

and potentially distracting messages within the tunnel

environment.

Due to their power consumption, the Secret Signs

significantly reduce maintenance costs.

• Low maintenance – greater than 5 years lamp

life

• Energy saving – up to 10 times more efficient than fluorescent signage

• Improved visual light source

To discuss a Secret Signage project, call Passcomm

today on 01925 821333.

Free-Air Cooling


Section 9 Free Air Cooling

Op t i c a l F i b r e P r o d u c t s a n d A c c e s s o r i e sFree-Air Cooling


What is Free-Air Cooling?Free-Air Cooling is a unique system

that utilises the natural environment

to provide cooling which is viable year

round in over 90% of the world.

The system drags external airflow through a unique filtration system using a high energy efficient fan.

When combined with the SMARTset

energy management platform, users

are able to see at first hand the energy efficiencies and cost-savings that are guaranteed with the system.

COOLflow4E Force is the latest cooling system from 4energy, the renowned

free-air specialists. Designed, tested

and manufactured with a wealth of

free-cooling knowledge, COOLflow4E Force can be deployed in a wide range

of applications including equipment

rooms and telecommunications cabins.

COOLflow4E Force is guaranteed to reduce carbon emissions significantly and deliver energy spend savings up

to 95%.

The COOLflow4E Force range has been designed to deliver maximum performance in all conditions. The

combination of the latest generation,

cutting edge composite construction

fans, together with 4energy’s

proven and patented COOLfilter4E technology, provides an unrivalled

level of power and efficiency.

• Savings of up to 25% on OpEX

cooling equipment maintenance

• Extends the life of your existing cooling equipment by 3+ years

• Enables intelligent capacity

expansion by optimising your existing infrastructure

Free-Air Cooling


SmartSET4energy SMARTset is a state of the art energy

management platform for technical facilities.

• ENTERPRISE focused

• REAL-TIME data from any sensor, equipment or

system

• REMOTE CONTROL and alarms

• ANALYSE and aggregate

• INTEGRATE with 3rd party systems

Coolflow4EBenefitsDelivering site

energy savings of

up to 30% at an

exceptional ROI

Extending the life of current cooling

assets at a lower

maintenance cost

Provides visibility

into energy and

equipment usage

• SAVE up to

30% on your

energy bill

• SAVE on

maintenance

• EASY

UPGRADE to full

system with modular

design

• PROLONG SERVICE

LIFE of your existing air conditioners

SMARTset4e Monitoring SoftwareSMARTset4e is a state-of-the-art IoT platform that provides operational managers with the tools to

connect to any equipment, sensor or element of their built environment. It can analyse that data to

discover insights and if required locally or centrally control source equipment and sensors.

It is suitable for technical estates, data centres, communication rooms and street cabinet applications

and connecting industrial built environments for SME’s or as part of a Demand Side Response

initiative.

To understand how the 4energy Free-Air Cooling System can save money for your business, call the Passcomm sales team today on 01925 821333.

Unit 24 Tatton CourtKingsland Grange

WarringtonCheshire

WA1 4RR

t: 01925 821 333f: 01925 821 321

e: [email protected]: www.passcomm.co.uk

Date post:	24-Aug-2018
Category:	Documents
Upload:	hadan
View:	217 times
Download:	0 times

PRODUCT CATALOGUE ISSUE 3 - Passcomm · 1 Fibre Optic Products and Accessories 2 High Performance...

Documents