Product Catalogue
2019
3
© 2019–2020 MAFI AB. All rights reserved.
Layo
ut a
nd p
rodu
ctio
n: S
ahls
a Ko
mm
unik
atio
n
IntroductionMAFI Product PortfolioSupports and BracketsRadio BracketsAntenna BracketsWall Mount SolutionsRooftop Solutions– Fixed – Free standing
AccessoriesDistributorsTable of Content
4.6.8.
36.48.60. 75.
105.114.115.
Index
Index
4 5
The ever growing MAFI puzzleMAFI has had another successful year, and we feel very humble as our solutions are so well received worldwide.
However, as usual, we choose to focus on the future!
In the coming years, we will continue to broaden our services - and we have a lot going on! We are preparing new, innovative products, qualified logistics for high delivery reliability and innovative solutions for the forthcoming 5G rollout. Simultaneously, we will expand our organisation to match the growing needs and demands of us.
MSS and MIS
Our two business units, MAFI Support Solutions and MAFI Integrated Solutions have laid a stable foundation for further development, thanks to high-performance products in demand. We have a genuine focus both on our tailored solutions that match a specific requirement for a particular customer, and our broad and flexible product portfolio, where almost all needs are met concerning antenna brackets. To expand our customer base, we are strengthening with new employees continuously.
The 5G rollout will be a lot about co-locations and densifying as well as to update and complete existing sites. Through our close contacts with the industry, we already know to a large extent what the needs for this look like, and we have developed new, innovative solutions that will simplify the upcoming 5G rollout.
Environment first
Taking responsibility for the environment is essential to us. Our products are made of premium galvanised steel, a fully recyclable structural material with comparably low CO2 emissions.
By upgrading to high strength steel, we can reduce weight and material use by 20% with maintained capacity. Also, we design for minimal material usage and waste, to produce a more sustainable product.
It is also important for us to maintain the high quality of our products. Our design and verification process ensure this. We design for quality and avoid welds when possible since bolted joints are preferable. Moreover, our suppliers are verified, and we batch sample test manufactured parts and product kits in-house.
Delivery reliability
A growing challenge for us has been to maintain our high delivery reliability as we grow. Moreover, I would like to say that we have succeeded. We measure two dates to see how well we perform: the date the customer ask for us to deliver and the date we promise that we can deliver. So, for last year our accuracy was 98 % on the promised date. We are working hard become even better. Two ways of addressing this are to improve our forecasts for future orders and to even furthermore develop our second sources.
These are just a few pieces of the MAFI puzzle that we are putting together to keep ahead in a fierce global competition. We hope we will keep your trust and that we together with OEM´s, design companies, mounters, partners and friends, can develop and grow into the future.
Pierre Bengtsson, CEO
In a world where everyone has to depend on each other, Mafi wants to make your life easier. For 25 years our customer relations has been just as important as the quality of our products. Knowing this, we have built the worldwide company we are today. On paper, Mafi is an engineering company that designs, tests, manufactures and delivers steelwork solutions.
But we go further than that:
We are responsive – we see it as part of our mission to understand your actual need.
We are explorers — we are always looking for new ways to enhance our solutions.
We are reliable — we always deliver on our promises.
Whatever it takes to get you there, we’re always prepared to go the extra mile; making us your preferred strategical partner.
CE Marking, Product Development and Design AidsMafi is a EN 1090 certified organization, which means that our CE-marked kits comply with EN 1090-1, EN 1090-2 standards to Execution Class 2.
During the product development process, every component is designed and optimised using Finite Element Analysis techniques. Prototypes are then physically tested and refined in our laboratory.
Every design follows these guidelines:
• Make the kit as easy as possible to assemble and provide clear assembly instructions.
• The kit is packed in as small a box as possible to ensure efficient storage and transport.
• Make the product as light as possible for easy handling on site.
Every kit comes with a data sheet with load tables. The load tables give the maximum ultimate vertical
and horizontal loads that may be applied to the kit. For bracket kits that can be clamped to tubular parent members — or support a tubular member — there is also a table of torque resistance for different standard tube diameters. MAFI provides CAD blocks for all kits and we can also provide Excel tools for checking brackets and freestanders.Disclaimer: Design recommendations given by MAFI concerning the use of a particular product are based on site information provided by the customer. MAFI provides a Declaration of Performance for the product itself, and it is the customer’s responsibility to ensure that imposed loads are within the capacity of the product.
It is always the responsibility of the site designer to verify that the parent structure is adequate to support the loads imposed by the product and that the installation of the product will comply with the installation instructions and with statutory and site owner’s rules and regulations.
Your direction is our goal.
Our two business units, MAFI Support Solutions and MAFI Integrated Solutions have laid a stable foundation for further development.
Introduction Introduction
6 MAFI Product Portfolio
MAFI Product Portfolio
MAFI MSSIn the MSS segment you will find all kind of general steel structure products needed to build a reliable and sustainable telecom site, for example freestanding platforms, support brackets, tubes and accessories. Products that can fit or host equipment from any telecom equipment manufacturer is an MSS product and constitutes a standard assortment. MSS products are stocked in our own and our distributors warehouses ready for fast deliveries every day.
MAFI MISAn MIS product is developed as an integrated part of a customer solution or product. That means that every MAFI MIS product is tailor made for our customers. MAFI is constantly developing new MIS products for existing as well as new customers.
Mafi product portfolio is divided into two main product segments; Mafi Support Solutions – MSS and Mafi Integrated Solutions – MIS.
Products
8
© 2019–2020 MAFI AB. All rights reserved.
Supports and Brackets
3263
3272
3273
Content of kit
© 2019–2020 MAFI AB. All rights reserved.
*Article 3263/3265/3272/3273
Designed to allow an equipment pole to be offset froma parent pole or tower leg.
FlexibilityThe 3263, 3265 and 3273 brackets can be mounted on any vertical round member from Ø 25–169 mm/1–6.7 in and also on vertical angel sections. The offset pole can be Ø 60.3 mm/2.4 in or Ø 76.1 mm/3 in with the standard Ø 76 mm/3 in U bolts supplied, or optionally up to Ø 114.3 mm/4.5 in.
The 3273 provide a maximum c/c offset of 230 mm/9.1 in and the 3263 and 3265 provide a maximum c/c offset of420 mm/16.5 in respectively 400 mm/15.7 in.The 3272 fi ts round members from Ø 48–193 mm/1.9–15.5 in and provides a maximum offset of 800 mm.The 3272 incorporates a double clamp to cope with the high torque loads impose by antennas at a large offset.
Detailed design dataDetailed design data for this productcan be found at www.mafi .se.
How to OrderTo order this kit, please contact MAFI quoting article number:
3263 or E-order number (SEG): 60006673265 or E-order number (SEG): 60006683272 or E-order number (SEG): 60006653273 or E-order number (SEG): 6000666
Contact information can be found at www.mafi .se.
Rev 5
MAFI 3263*One-Direction Offset Family
MAFI 3263 One-Direction Offset Family
MAFI 3268 Symmetric Offset Family
MAFI 3610 Raking Tower Leg Offset Family
MAFI 3611 Vertical Tower Leg Offset Family
MAFI 3274 Small Universal Pole Mount
MAFI 43249 Combiclamp Family
MAFI 4418 3-Sector Antenna Mount
MAFI 5310 Joint Plate Kit
MAFI 5320 Crossover Kit
*Article 3263/3265/3272/3273
Rev 5
© 2019–2020 MAFI AB. All rights reserved.© 2019–2020 MAFI AB. All rights reserved.
9Rev 5*Article MAFI 3263/3265/3272/3273
Parts list
Part Material Quantity 3263/-65/-73 Quantity 3272
Clamp S355MC FZV 2 4
Bracket S355MC FZV 2 2
U-bolt M12 A4 or 8.8 FZV 2 2
Threaded rod M12 8.8 FZV 4 8
Fasteners 8.8 FZV Incl. Incl.
Package data
Product Length (mm/in) Width (mm/in) Height (mm/in) Weight (kg/lb)
3263 640/25.2 115/4.5 65/2.6 7.3/16.1
3265 640/25.2 150/5.9 70/2.8 7.5/16.5
3272 1050/41.3 170/6.7 65/2.6 19.4/42.8
3273 460/18.1 115/4.5 60/2.4 6.2/13.7
Product options
3265: 400 mm/15.7 in tube o� set kit that � ts Ø 89–114 mm/ 3.5–4.5 in
3272
3263/3265
3273
Tightening torque
Equipment pole
Parent pole/leg
© 2019–2020 MAFI AB. All rights reserved.
*Article 3263/3265/3272/3273
3263 & 3273:Ø 60–76 mmØ 2.4–3 in
3265:Ø 89–114 mmØ 3.5–4.5 in
40 × 40 mm–120 × 120 mm
1.6 × 1.6 in–4.7 × 4.7 in
40 × 40 mm–120 × 120 mm
1.6 × 1.6 in–4.7 × 4.7 in
3263, 3265 & 3273:Ø 25–169 mmØ 1–6.7 in
3272:Ø 48–193 mmØ 1.9–15.5 in
Threaded rods M12: 31 Nm
U-bolts M12: 31 Nm
Rev 5
32653263
3272 EN 10903273
Product nr. Max o� set (mm/in)
3263 420/16.5
3265 400/15.7
3272 800/31.5
3273 230/9.1
Resisting torque per single bracket
Parent Pole ø (mm/in)Torque (Nm)3263/65/73
Torque (Nm) 3272
25/1 77 —
42.3/1.7 152 —
48.3/1.9 178 356
60.3/2.4 230 460
76.1/3 298 596
88.9/3.5 353 706
101.6/4 408 816
114.3/4.5 462 924
152.4/6 627 1254
168.9/6.7 698 1396
193/7.6 — 1605
Mresisting
Fwind
Fmass
Ft
© 2019–2020 MAFI AB. All rights reserved.
*Article 3263/3265/3272/3273
Design resistance dataThe load limits given in this data sheet apply to the MAFI product only. The designer should always check thatthe supporting structure can safely carry the loads appliedto it by the MAFI product.
Vertical loadMax Supported Equipment mass3263/3265/3273 = 120 kg/264.6 lb
Max Supported Equipment mass 3272 = 60 kg/132.3 lb
Ultimate Transient Man-Load MAFI3263/3265/3272/3273 = 2.4 kN
Rotational slip resistanceWhen high side forces can be expected, use the tables below to check for rotational slip when mounting on a circular pole.Use ultimate loads and equipment offset to calculatethe applied torque.
Rev 5
© 2019–2020 MAFI AB. All rights reserved. © 2019–2020 MAFI AB. All rights reserved.
10 11Rev 5 Rev 5*Article 3263/3265/3272/3273*Article 3263/3265/3272/3273
Content of kit
3270
3268
© 2019–2020 MAFI AB. All rights reserved.
*Article 3268/3270
Designed to provide support for two similar antennas offset symmetrically from a central parent pole. A third antenna may be mounted on the parent pole.
FlexibilityFits any round member from Ø 76–169 mm/3–6.7 in.The offset poles can be Ø 60.3 or 76.1 mm/2.4 or 3 in and may be specifi ed in any length. The 3268 gives a c/c distance between the outer antennas of 800 mm/31.5 in,and the 3270 gives a c/c distance between the outerantennas of 1700 mm/66.9 in.
Detailed design dataDetailed design data for this productcan be found at www.mafi .se.
How to OrderTo order this kit, please contact MAFI quoting article number:
3268 or E-order number (SEG): 60006693270 or E-order number (SEG): 6000670
Contact information can be found at www.mafi .se.
Rev 6
MAFI 3268*Symmetric Offset Family
Parts list
Part Material Quantity
Clamp S355MC FZV 2
Bracket S355MC FZV 2
U-bolt M12 A4 or 8.8 FZV 4
Threaded rod M12 8.8 FZV 4
Fasteners 8.8 FZV Incl.
Package data
Product Length (mm/in) Width (mm/in) Height (mm/in) Weight (kg/lb)
3268 1050/41.3 170/6.7 65/2.6 12.1/26.7
3270 2000/78.7 160/6.3 160/6.3 40/88.2
Tightening torque
Equipment pole
Parent pole/leg
© 2019–2020 MAFI AB. All rights reserved.
*Article 3268/3270
Ø 60–76 mmØ 2.4–3 in
Ø 76–169 mmØ 3–6.7 in
Threaded rod M12: 31 Nm
U-bolts M12: 31 Nm
3270
3268
Rev 6
3268
3270 EN 1090
© 2019–2020 MAFI AB. All rights reserved. © 2019–2020 MAFI AB. All rights reserved.
12 13Rev 6Rev 6 *Article 3268/3270*Article 3268/3270
Ultimate Torque Capacity per bracket
Parent Pole ø (mm/in) Torque (Nm)
76.1/3 298
88.9/3.5 353
101.6/4 408
114.3/4.5 462
152.4/6 627
168.9/6.7 698
Fwind
Fmass
Ft
Fwind
Fmass
© 2019–2020 MAFI AB. All rights reserved.
*Article 3268/3270
Design resistance dataThe load limits given in this data sheet apply to the MAFI product only. The designer should always check thatthe supporting structure can safely carry the loads appliedto it by the MAFI product.
Vertical loadMax Supported Equipment mass (Fmass) 3268= 90 kg/198.4 lb
Max Supported Equipment mass (Fmass) 3270= 60 kg/132.3 lb
Ultimate Transient Man-Load (Ft)= 2.4 kN
Horizontal load Ultimate transient horizontal load per bracket (Fwind) 3268 = 2000 NUltimate transient horizontal loadper bracket (Fwind) 3270 = 2000 N.
Rotational slip resistanceWhen asymetyric forces can be expected, for exampleif the equipment area differs between offset arms,use the table below to check for rotational slipwhen mounting on a circular pole.Use ultimate loads to calculate the resulting torque.
Rev 5
3610Content of kit
3613Content of kit
© 2019–2020 MAFI AB. All rights reserved.
*Article 3610/3613
Designed for mounting an equipment poleon a raking parent pole or tower leg in a perpendicular or oblique direction. The kits consistsof a pair of brackets with all necessary fasteners.
FlexibilityThe raking tower leg offset can carry a tube with up to250 kg/551 lb of equipment mounted. This can be useful when radio and antenna equipment is to be preassembled off site to a tube and then lifted and mounted to a tower. Hole pattern on 3610 front clamp is designed to allow oblique installation on angular tower legsThe bracket arm can be fi xed at angles 45° or 60°, to the left or right, of the parent leg. Offset poles for either kit can range from Ø 60–114 mm/2.4–4.5 in with a maximum upper offsetof 350 mm/13.8 in c/c and a lower fi xed offset of250 mm/9.8 in c/c.
Detailed design dataDetailed design data for this productcan be found at www.mafi .se.
How to OrderTo order this kit, please contact MAFI quoting article number:
3610 or E-order number (SEG): 60006763613 or E-order number (SEG): 6000677
Contact information can be found at www.mafi .se.
Rev 4
Angle options for 3610
MAFI 3610*Raking Tower Leg Offset Family
© 2019–2020 MAFI AB. All rights reserved. © 2019–2020 MAFI AB. All rights reserved.
14 15Rev 4*Article 3610/3613Rev 6 *Article 3268/3270
Parts list
Part Material Quantity
Clamp S355MC FZV 4
Bracket S355MC FZV 2
U-bolt M12 A4 or 8.8 FZV 2
Threaded rod M12 8.8 FZV 4
Fasteners 8.8 FZV Incl.
Package data
Product Length (mm/in) Width (mm/in) Height (mm/in) Weight (kg/lb)
3610 440/17.3 280/11 80/3.1 12.1/26.7
3613 500/19.7 400/15.7 100/3.9 16.5/36.4
Product options
2867-1: U-bolt kit for attaching Ø 114 mm/4.5 in equipment tube.
Small clamps (3610)
Large clamps (3613)
Shared offset brackets
Tightening torque
Equipment pole
Parent pole/leg
© 2019–2020 MAFI AB. All rights reserved.
*Article 3610/3613
Ø 60–76 mmØ 2.4–3 in
(Ø 114 mm/4.5 in as option)
3610:60 × 60–120 × 120 mm2.4 x 2.4–4.7 x 4.7 in
3613:120 × 120–200 × 200 mm4.7 x 4.7–7.9 x 7.9 in
3610:60 × 60–120 × 120 mm2.4 x 2.4–4.7 x 4.7
3613:120 × 120–200 × 200 mm4.7 x 4.7–7.9 x 7.9
3610:Ø 76.1–139.7 mmØ 3–5.5 in
3613:Ø 139.7–244.5 mmØ 5.5–9.6 in
Bolt M16: 210 Nm
Threaded rods M12: 31 Nm
U-bolts M12: 31 Nm
Rev 4
3610
3613 EN 1090
Ultimate Torque Capacity per bracket
Parent Pole ø (mm/in) Torque (Nm) 3610 Torque (Nm) 3613
76.1/3 298 -
88.9/3.5 353 -
101.6/4 408 -
114.3/4.5 462 -
139.7/5.5 572 572
152.4/6 - 627
168.9/6.6 - 698
193/7.6 - 802
244.5/9.6 - 1025
Fmass
Ft
When high side forces can be expected, use the tables opposite to check for rotational slip when mounting on a circular pole. Use ultimate loads and equipment offset to calculate the applied torque.
Mresisting
Fwind
© 2019–2020 MAFI AB. All rights reserved.
*Article 3610/3613
Design resistance dataThe load limits given in this data sheet apply to the MAFI product only. The designer should always check that the supporting structure can safely carry the loads appliedto it by the MAFI product.
Vertical loadMax Supported Equipment mass (including weightof offset pole) 3610/3613 = 250 kg/551.2 lb.
Ultimate Transient Man-Load (Ft) 3610/3613 = 2.4 kN
Horizontal load Ultimate transient horizontal load peroffset arm (Fwind) = 4000 N
Rotational slip resistanceWhen high side forces can be expected, use the table belowto check for rotational slip when mounting on a circular pole. Use ultimate loads and equipment offset to calculate the applied torque.
Rev 4
3.175
© 2019–2020 MAFI AB. All rights reserved. © 2019–2020 MAFI AB. All rights reserved.
16 17Rev 4Rev 4 *Article 3610/3613*Article 3610/3613
3612
3614 3615
3611
Angle options for 3611 and 3612
© 2019–2020 MAFI AB. All rights reserved.
*Article 3611/3612/3614/3615
Designed for mounting an equipment pole on a verticalparent pole or tower leg in a perpendicular or oblique direction. The kits consists of a pair of brackets with all necessary fasteners.
FlexibilityThe vertical tower leg offset can carry a tube with up to250 kg/551 lb of equipment mounted. This can be useful when radio and antenna equipment is to be preassembled off site to a tube and then lifted and mounted to a tower. Hole pattern on 3611/3612 front clamp is designed to allow oblique installation on angular tower legs.The bracket arms can be fi xed at angles 45° or 60°, to the left or right, of the parent leg. Offset poles for either kit can range from Ø 60–114 mm/2.4–4.5 in. Maximum c/c offset for 3612/3615 is250 mm/9.8 in. Maximum c/c offset for 3611/3614 is350 mm/13.8 in.
Detailed design dataDetailed design data for this productcan be found at www.mafi .se.
How to OrderTo order this kit, please contact MAFI quoting article number:
3611 or E-order number (SEG): 60006783612 or E-order number (SEG): 60006793614 or E-order number (SEG): 60006803615 or E-order number (SEG): 6000681
Contact information can be found at www.mafi .se
MAFI 3611*Vertical Tower Leg Offset Family
Rev 4
Parts list
Part Material Quantity
Clamp S355MC FZV 4
Bracket S355MC FZV 2
U-bolt M12 A4 or 8.8 FZV 2
Threaded rod M12 8.8 FZV 4
Fasteners 8.8 FZV Incl.
Package data
Product Length (mm/in) Width (mm/in) Height (mm/in) Weight (kg/lb)
3611 500/19.7 280/11 80/3.1 12.9/28.4
3612 500/19.7 280/11 80/3.1 11.2/24.7
3614 440/17.3 400/15.7 100/3.9 17.5/38.6
3615 440/17.3 400/15.7 100/3.9 16.1/35.5
Product options
2867-1: U-bolt kit for attaching Ø 114 mm/4.5 in equipment tube.
Small clamps (3611 and 3612)
Large clamps (3614 and 3615)
Shared offset brackets
3611 & 3612:Ø 76.1–139.7 mmØ 3–5.5 in
3614 & 3615:Ø 139.7–244.5 mmØ 5.5–9.6 in
3611 & 3612:60 × 60–120 × 120 mm2.4 x 2.4–4.7 x 4.7
3614 & 3615:120 × 120–200 × 200 mm4.7 x 4.7–7.9 x 7.9 in
Tightening torque
Equipment pole
Parent pole/leg
© 2019–2020 MAFI AB. All rights reserved.
*Article 3611/3612/3614/3615
Bolt M16: 210 Nm
Threaded rods M12: 31 Nm
U-bolts M12: 31 Nm
Rev 4
3611 & 3612:60 × 60–120 × 120 mm2.4 x 2.4–4.7 x 4.7 in
3614 & 3615:120 × 120–200 × 200 mm4.7 x 4.7–7.9 x 7.9 in
Ø 60–76 mmØ 2.4–3 in
(Ø 114 mm/4.5 in as option)
36123611
36153614 EN 1090
© 2019–2020 MAFI AB. All rights reserved. © 2019–2020 MAFI AB. All rights reserved.
18 19*Article 3611/3612/3614/3615*Article 3611/3612/3614/3615 Rev 4Rev 4
Mresisting
Fwind
Fmass
Ft
© 2019–2020 MAFI AB. All rights reserved.
*Article 3611/3612/3614/3615
Design resistance dataThe load limits given in this data sheet apply to the MAFI product only. The designer should always check thatthe supporting structure can safely carry the loads appliedto it by the MAFI product.
Vertical loadMax Supported Equipment mass (including weightof offset pole) 3611/-12/-14/-15 = 250 kg/551.2 lb.
Ultimate Transient Man-Load 3611/3612 = 2.4 kN
Ultimate Transient Man-Load 3614/3615 = 2.4 kN
Horizontal load Ultimate transient horizontal load per offset arm (Fwind)= 4000 N
Rotational slip resistanceWhen high side forces can be expected, use the tables below to check for rotational slip when mounting on a circular pole. Use ultimate loads and equipment offset to calculatethe applied torque.
Rev 4
Ultimate Torque Capacity per bracket
Parent Pole ø(mm/in)
Torque (Nm)3611/3612
Torque (Nm) 3614/3615
76.1/3 298 -
88.9/3.5 353 -
101.6/4 408 -
114.3/4.5 462 -
139.7/5.5 572 572
152.4/6 - 627
168.9/6.6 - 698
193/7.6 - 802
244.5/9.6 - 1025
© 2019–2020 MAFI AB. All rights reserved.
Article 3274
Designed for mounting an equipment pole on a parentpole or tower leg. The kit consists of a pair of bracketswith all necessary fi xings.
FlexibilityCan be mounted on any round member fromØ 25–114.3 mm/1–4.5 in as well as equal-angle or square section members up to 80 × 80 mm/3.1 × 3.1 in. Equipment poles can range from Ø 48–114.3 mm/1.9–4.5 in.
Detailed design dataDetailed design data for this productcan be found at www.mafi .se.
How to OrderTo order this kit, please contact MAFI quoting article number:
3274 or E-order number (SEG): 6000688
Contact information can be found at www.mafi .se.Content of kit
Rev 3
MAFI 3274Small Universal Pole Mount
© 2019–2020 MAFI AB. All rights reserved. © 2019–2020 MAFI AB. All rights reserved.
20 21Rev 3Article 3274*Article 3611/3612/3614/3615Rev 4
Parts list
Part Material Quantity
Clamp S355MC FZV 6
Threaded rod M10 8.8 FZV 4
Fasteners 8.8 FZV Incl.
Package data
Product Length (mm/in) Width (mm/in) Height (mm/in) Weight (kg/lb)
3274 410/16.1 110/4.3 50/2 5.8/12.8
Product options
Tubes of various lengths, diameters and wall thicknesses can be ordered from MAFI.
Tightening torque
Equipment pole
Parent pole/leg
© 2019–2020 MAFI AB. All rights reserved.
Article 3274
Ø 48–114.3 mmØ 1.9–4.5 in
40 × 40–80 × 80 mm1.6 × 1.6–3.1 × 3.1 in
Ø 25–114.3 mmØ 1–4.5 in
Threaded rods: 18 Nm
Rev 3
Middle clamp
Small clamp Threaded rod
3274 EN 1090
Ultimate Torque Capacity per bracket
Parent Pole ø (mm/in) Torque (Nm)
25/1 77
42.3/1.7 152
48.3/1.9 178
60.3/2.4 230
76.1/3 298
88.9/3.5 353
101.6/4 408
114.3/4.5 462
© 2019–2020 MAFI AB. All rights reserved.
Article 3274
Design resistance dataThe load limits given in this data sheet apply to the MAFI product only. The designer should always check thatthe supporting structure can safely carry the loads appliedto it by the MAFI product.
Vertical loadMax Supported Equipment mass (includingweight of offsetpole = 250 kg/551.2 lb
Ultimate Transient Man-Load = 2.4 kN
Horizontal load Ultimate transient horizontal load per bracket = 4000N
Rotational slip resistanceWhen high side forces can be expected, use the tables below to check for rotational slip when mounting on a circular pole. Use ultimate loads and equipment offset to calculatethe applied torque.
Fmass
Fhorizontal
Mresisting
Fwind
Rev 3
© 2019–2020 MAFI AB. All rights reserved. © 2019–2020 MAFI AB. All rights reserved.
22 23Rev 3Article 3274Article 3274Rev 3
4415Content of kit
4418Content of kit
© 2019–2020 MAFI AB. All rights reserved.
*Article 4415/4418
Designed to accommodate three large panel antennas attached to a single spine pole.
FlexibilityThe mounts will fi t spine poles ranging fromØ 76–114.3 mm/3–4.5 in. 4415 provides an offset of126 mm/5 in from the equipment pole center to the face ofthe spine pole. 4418 provides an offset of 226 mm/8.9 in from the equipment pole center to the face of the spine pole.The equipment poles can be Ø 60.3 or 76.1 mm/2.4 or 3 in.
Detailed design dataDetailed design data for this productcan be found at www.mafi .se.
How to orderTo order this kit, please contact MAFI quoting article number:
4418 or E-order number (SEG): 60006824415 or E-order number (SEG): 6000881
Contact information can be found at www.mafi .se.
Rev 6
MAFI 4418*3-Sector Antenna Mount
Parts list
Part Material Quantity
Clamp S355MC FZV 4
Bracket S355MC FZV 6
U-bolt M12 A4 or 8.8 FZV 6
Spacer bushing S355MC FZV 6
Fasteners 8.8 FZV Incl.
Package data
Product Length (mm/in) Width (mm/in) Height (mm/in) Weight (kg)
4415 390/15.4 230/9.1 120/4.7 13.5/29.8
4418 390/15.4 275/10.8 120/4.7 13.5/29.8
Product options
Tubes of various lengths, diameters and wall thicknesses can be ordered from MAFI.
4415
4418
Tightening torque
Equipment pole
Parent pole/leg
© 2019–2020 MAFI AB. All rights reserved.
*Article 4415/4418
Ø 60.3–76.1 mm2.4 –3 in
Ø 76–114.3 mmØ 3–4.5 in
Bolts M12: 31–80 Nm
U-bolts M12: 31 Nm
Rev 6
4415
4418 EN 1090
© 2019–2020 MAFI AB. All rights reserved. © 2019–2020 MAFI AB. All rights reserved.
24 25Rev 6Rev 6 *Article 4415/4418*Article 4415/4418
Fmass
Ft
Fwind
© 2019–2020 MAFI AB. All rights reserved.
*Article 4415/4418
Design resistance dataThe load limits given in this data sheet apply to the MAFI product only. The designer should always check thatthe supporting structure can safely carry the loads appliedto it by the MAFI product.
Vertical loadMax Supported Equipment mass per offset tube (Fmass) =60 kg/132.3 lb.
Ultimate Transient Man-Load (Ft)= 2.4 kN
Horizontal load Ultimate transient horizontal load per tube (Fwind) = 4000 N
Rev 6
© 2019–2020 MAFI AB. All rights reserved.
*Article 5310/5311/5312
Designed to provide perpendicular joints between solidor thick-walled circular member and square tubes.
FlexibilityFits parent poles ranging from Ø 25–60 mm/1–2.4 in.and square beams ranging from 50 × 50–60 × 60 mm/2 × 2–2.4 × 2.4 in.
See 5320/5321 for larger kits.
Detailed design dataDetailed design data for this productcan be found at www.mafi .se.
How to OrderTo order this kit, please contact MAFI quoting article number:
5310 or E-order number (SEG): 60006715311 or E-order number (SEG): 60006725312 or E-order number (SEG): 6000673
Contact information can be found at www.mafi .se.
MAFI 5310*JointPlate Kit
Rev 3
× 2Content of kit
5310
53125311
© 2019–2020 MAFI AB. All rights reserved. © 2019–2020 MAFI AB. All rights reserved.
26 27*Article 5310/5311/5312 Rev 3Rev 6 *Article 4415/4418
Parts list
Part Material Quantity
Plate S355MC FZV 2
U-bolt 8.8 FZV 4
Fasteners 8.8 FZV Incl.
Package data
Product Length (mm/in) Width (mm/in) Height (mm/in) Weight (kg/lb)
5310 150/5.9 110/4.3 40/1.6 2.8/6.2
5311 180/7.1 110/4.3 40/1.6 3.1/6.6
5312 180/7.1 110/4.3 40/1.6 3.1/6.8
Product options
Tubes of various lengths, diameters and wall thicknesses can be ordered from MAFI.
Tightening torque
Equipment pole
Parent pole/leg
© 2019–2020 MAFI AB. All rights reserved.
*Article 5310/5311/5312
50 × 50–60 × 60 mm2 × 2–2.4 × 2.4 in
5312:
50 × 50–60 × 60 mm2 × 2–2.4 × 2.4 in
5310Ø 25–35 mmØ 1–1.4 in
5311:Ø 35–60 mmØ 1.4– 2.4 in
U-bolt M12: 15 Nm
Rev 3
5311
53125310 EN 1090
U-bolt in 5311
U-bolt in 5310
U-bolt in 5312
© 2019–2020 MAFI AB. All rights reserved.
*Article 5310/5311/5312
Design resistance dataThe load limits given in this data sheet apply to the MAFIproduct only. The designer should always check thatthe supporting structure can safely carry the loads appliedto it by the MAFI product.
Vertical loadMax Supported Equipment mass per joint Fmass = 100 kg/220 lb.
Tightening torque Recommended tightening torque, with oiled nuts and bolts in delivery state Mt= 15 Nm.
Rev 3
Fmass
Mt
© 2019–2020 MAFI AB. All rights reserved. © 2019–2020 MAFI AB. All rights reserved.
28 29Rev 3*Article 5310/5311/5312*Article 5310/5311/5312Rev 3
© 2019–2020 MAFI AB. All rights reserved.
*Article 5320/5321
Designed to provide perpendicular joints between circular members and square tubes.
Flexibility5320 fi ts circular tubes of Ø 76.1 mm/3 in and square beams ranging from 50 × 50–60 × 60 mm/2 × 2–2.4 × 2.4 in.5321 fi ts circular tubes of Ø 114.3 mm/4.5 in and square beams ranging from 50 × 50–60 × 60 mm/2 × 2–2.4 × 2.4 in.
See 5310/5311/5312 for smaller kits.
Detailed design dataFor use when designing sites, detailed design data for this product can be found at www.mafi .se.
How to OrderTo order this kit, please contact MAFI quoting article number:
5320 or E-order number (SEG): 60006745321 or E-order number (SEG): 6000675
Contact information can be found at www.mafi .se.
Content of kit
5320
5321
Rev 3
MAFI 5320*Crossover Kit
Parts list
Part Material Quantity
Bracket S355MC FZV 1
Plate S355MC FZV 2
U-bolt 8.8 FZV or A480 2
Fasteners 8.8 FZV Incl.
Package data
Product Length (mm/in) Width (mm/in) Height (mm/in) Weight (kg/lb)
5320 220/8.7 140/5.5 50/2 2.4/5.3
5321 250/9.8 150/5.9 50/2 2.7/6
Product options
Tubes of various lengths, diameters and wall thicknesses can be ordered from MAFI.
Tightening torque
Square tube
Circular tube
© 2019–2020 MAFI AB. All rights reserved.
*Article 5320/5321
50 × 50–60 × 60 mm2 × 2–2.4 × 2.4 in
5320:
5321:
Ø 76.1 mmØ 3 in
Ø 114.3 mmØ 4.5 in
U-bolt M12: 15 Nm
MAFI 5320 MAFI 5321
Rev 3
5320
5321 EN 1090
© 2019–2020 MAFI AB. All rights reserved. © 2019–2020 MAFI AB. All rights reserved.
30 31Rev 3*Article 5320/5321*Article 5320/5321Rev 3
Ultimate torque capacity
Parent Pole ø (mm/in) Torque (Nm)
76.1/3 298
114.3/4.5 462
Mr
Fwind
Fmass
Fr
© 2019–2020 MAFI AB. All rights reserved.
*Article MAFI 5320/5321
Design resistance dataThe load limits given in this data sheet apply to the MAFI product only. The designer should always check thatthe supporting structure can safely carry the loads appliedto it by the MAFI product.
Vertical loadMax Supported Equipment mass Fmass = 100 kg/220 lb.
Lateral reaction forceUltimate lateral reaction force Fr = 3875 N
Rotational slip resistanceWhen high side forces can be expected, use the tablebelow to check for rotational slip. Use ultimate loadsto calculate the applied torque.
Rev 3
© 2019–2020 MAFI AB. All rights reserved.
*Article 43246/43247/43248/43249
Designed to provide perpendicular joints betweentwo circular members.
Flexibility43249 joints two circular tubes of Ø 114.3 mm/4.5 in.43248 joints one circular tube of Ø 114.3 mm/4.5 into a circular tube of Ø 76.1 mm/3 in.43247 joints two circular tubes of Ø 76.1 mm/3 in.43246 joints one circular tube of Ø 60.3 mm/2.4 into a circular tube of Ø 48.3 mm/ 1.9 in. The products are delivered with all necessary bolts and nuts.
Detailed design dataFor use when designing sites, detailed design data for this product can be found at www.mafi .se.
How to OrderTo order this kit, please contact MAFI quoting article number:
43249432484324743246
Contact information can be found at www.mafi .se.
Rev 4
43249
43248 43247
43246
MAFI 43249*CombiclampFamily
© 2019–2020 MAFI AB. All rights reserved. © 2019–2020 MAFI AB. All rights reserved.
32 33*Article 43246/43247/43248/43249 33 Rev 4*Article 5320/5321Rev 3
Parts list
Part Material Quantity
Bracket S355MC FZV 1
U-bolt 8.8 FZV or A480 4
Fasteners 8.8 FZV Incl.
Package data
Product Length (mm/in) Width (mm/in) Height (mm/in) Weight (kg/lb)
43249 280/11 280/11 100/3.9 7.8/17.2
43248 280/11 280/11 100/3.9 6.9/15.2
43247 230/9.1 230/9.1 75/2.9 4.4/9.7
43246 210/8.3 210/8.3 75/2.9 3.2/7.1
Product options
Tubes of various lengths, diameters and wall thicknesses can be ordered from MAFI.
Tightening torque
Parent pole/leg
© 2019–2020 MAFI AB. All rights reserved.
*Article 43246/43247/43248/43249
43249:
43248:
43247:
43246:
Ø 114.3 mmØ 4.5 in
Ø 114.3 mmØ 4.5 in
Ø 76.1 mmØ 3 in
Ø 76.1 mmØ 3 in
Ø 60.3 mmØ 2.4 in
Ø 48.3 mmØ 1.9 in
U-bolt M12: 15 Nm
U-bolt M16: 20 Nm
4324843247
43249
43246
Rev 4
4324743246
4324943248 EN 1090
Ultimate Torque Capacity
Parent Pole ø (mm/un) Torque (Nm)
48.3/1.9 178
60.3/2.4 230
76.1/3 298
114.3/4.5 462
Fmass
Fr
Mr
Frot
Frot
© 2019–2020 MAFI AB. All rights reserved.
*Article 43246/43247/43248/43249
Design resistance dataThe load limits given in this data sheet apply to the MAFI product only. The designer should always check thatthe supporting structure can safely carry the loads appliedto it by the MAFI product.
Vertical loadMax Supported Equipment mass Fmass = 200 kg/440.9 lb
Lateral reaction force Ultimate lateral reaction force Fr = 2000 N
Axial moment Ultimate axial moment Mr: 43249 = 1000 Nm
43248 = 350 Nm
43247 = 350 Nm
43246 = 150 Nm
Rotational slip resistanceWhen forces that attempt to rotate the bracket around the tube are to be expected, use the table below to check for rotational slip. Use ultimate loads to calculate the applied torque.
Rev 4
© 2019–2020 MAFI AB. All rights reserved. © 2019–2020 MAFI AB. All rights reserved.
34 35Rev 4Rev 4 *Article 43246/43247/43248/43249 33*Article 43246/43247/43248/43249 33
36
© 2019–2020 MAFI AB. All rights reserved.
*Article 3611/3612/3614/3615
Radio Brackets
© 2019–2020 MAFI AB. All rights reserved.
Article 5110
Designed for attaching radios to existing cable trays.
FlexibilityThe support is delivered as a flat pack and can easilybe mounted on cable trays of width 200–500 mm/7.9–19.7 in.Self-tapping screws are included.
Detailed design dataDetailed design data for this productcan be found at www.mafi .se.
How to OrderTo order this kit, please contact MAFI quoting article number:
5110 or E-order number (SEG): 6000687
Contact information can be found at www.mafi .se. Content of kit
Rev 4
MAFI 5110Radio Support
MAFI 5110 Radio Support
MAFI 6024 Dual ERS Bracket
MAFI 6029 Multi ERS Bracket XL
MAFI 1234 RRU Adaptor Plate
MAFI 1236 PSU Adapter Plate
MAFI 4036 Single/Dual RRU Support
MAFI 1237 RRU C-Rail Bracket
MAFI 1241 Micro ERS Vertical
MAFI 4019 RRU Mount Family
© 2019–2020 MAFI AB. All rights reserved.
37Article 5110 Rev 4
Parts list
Part Material Quantity
Support bracket DX51D Z350 2
Self-tapping screw 8.8 Fe/ZnNi8P4 8
Bolt M10 A4 4
Fasteners FZV Incl.
Package data
Product Length (mm/in) Width (mm/in) Height (mm/in) Weight (kg/lb)
5110 540/21.3 345/13.6 20/0.8 3.3/7.3
Product options
91103: Adaptor plate for Nokia RRH.
1234: Adaptor plate for Ericsson ERS.
Parent structure
© 2019–2020 MAFI AB. All rights reserved.
Article 5110
Width of cable tray:200–500 mm/7.9–19.7 in.
Rev 4
5110
Parent pole/leg
60 × 60–80 × 80 mm2.4 x 2.4–3.1 x 3.1 in
50 × 50–80 × 80 mm2 x 2–3.1 x 3.1 in
Ø 55–114 mmØ 2.2–4.5 in
Parent pole/leg
60 × 60–80 × 80 mm2.4 x 2.4–3.1 x 3.1 in
50 × 50–80 × 80 mm2 x 2–3.1 x 3.1 in
Ø 55–114 mmØ 2.2–4.5 in
6024 6029
© 2019–2020 MAFI AB. All rights reserved.
Article 6024/6029
Bracket for attaching two standard or Heavy ERS units with a hole pattern of c/c 30 mm/1.2 in and/or c/c 80 mm/3.1 in. Mount on either a pole, wall, angle tower or square tube.The bracket also allows a mix of RRU and fi lter/PSU. Maximum equipment weight 80 kg/176 lb.
Rev 1
Bracket for attaching six standard or four Heavy ERS units, (or a mix), with a hole pattern of c/c30 mm/1.2 in and/or c/c 80 mm/3.1 in. Mount on either a pole, wall, angle tower or square tube.Maximum equipment weight 120 kg/264 lb.
6024Dual ERS Bracket
6029Multi ERS Bracket XL
© 2019–2020 MAFI AB. All rights reserved. © 2019–2020 MAFI AB. All rights reserved.
38 39Rev 1Rev 4 Article 6024/6029Article 5110
© 2019–2020 MAFI AB. All rights reserved.
Article 1234Rev 2
To be used when modernizing or expanding capacity on existing footprint. The plate allows you to mount one face mounted or two bookshelf mounted Ericsson RRUs.The plate also allow for PSU mounting behind the RRUs.
FlexibilityThe adaptor plate can be mounted on MAFI products:4010, 4015, 4020, 4019 and 4036-family. Or on similar brackets with same footprint.
Detailed design dataDetailed design data for this productcan be found at www.mafi .se.
How to OrderTo order this kit, please contact MAFI quoting article number:
1234 or E-order number (SEG): 6000825
Contact information can be found at www.mafi .se.
Design resistance dataThe load limits given in this data sheet apply to the MAFI product only. The designer should always check thatthe supporting structure can safely carry the loads appliedto it by the MAFI product.
MAFI 1234RRU Adaptor Plate
Content of kit
Parts list
Part Material Quantity
Adaptor Plate S355MC FZV 1
Bolt M8 A4 8
Washer M8 A4 8
Bolt M10 8.8 FZV 4
Washer M10 8.8 FZV 8
Nut M10 8.8 FZV 8
Locking Nut M4 A4 4
Washer M4 A4 4
Package data
Product Length (mm/in) Width (mm/in) Height (mm/in) Weight (kg/lb)
1234 300/11.8 300/11.8 30/1.2 2.4/5.3
Tightening torque
Mountable products
© 2019–2020 MAFI AB. All rights reserved.
Article 1234 Rev 2
4010, 4015, 4020, 4019, 4036 and 5110 family or on similar brackets withthe same footprint.
Bolt M8: 22 Nm
Bolt M10: 40 Nm
Equipment weight
Maximum: 35 kg/77.2 lb
1234 EN 1090
© 2019–2020 MAFI AB. All rights reserved. © 2019–2020 MAFI AB. All rights reserved.
40 41Rev 2Article 1234Article 1234Rev 2
C-rail compability
H1 ≈ 41 mm/1.6 inH2 ≥ 20 mm/0.8 inW ≥ 20 mm/0.8 in
1236 1237
© 2019–2020 MAFI AB. All rights reserved.
Article 1236/1237
Adapter plate that that enables mounting of PSU-08 to an RRU with PSU hole pattern 167.5 x 228 mm/6.6 x 9 in.
Rev 1
Plate for mounting a single ERS, PSU or fi lter to a C-rail in either bookshelf or portrait position. Mounting a legacy RRU requires two plates for each RRU.
1236PSU Adapter Plate
1237RRU C-Rail Bracket
Parent pole/leg Performance
50 × 50–80 × 80 mm2 x 2–3.2 x 3.2 in
50 × 50–80 × 80 mm2 x 2–3.2 x 3.2 in
Maximum equipment weight: 10 kg/22 lbMaximum horizontal reaction force: 800 NØ 76–114 mm
Ø 3–4.5 in
1241© 2019–2020 MAFI AB. All rights reserved.
Article MAFI 1241
Bracket for mounting Micro ERS units with a maximum weight of 10 kg/22 lb on a wall, circular member, angle member or box beam section.Azimuth is adjustable ±30° and downtilt up to 45°.
Rev 1
Wall mount
Pole mount 0°
Pole mount 45° downtilt
MAFI 1241Micro ERS Vertical
© 2019–2020 MAFI AB. All rights reserved. © 2019–2020 MAFI AB. All rights reserved.
42 43Rev 1Article MAFI 1241Article 1236/1237Rev 1
© 2019–2020 MAFI AB. All rights reserved.
Article 4019-2/4019-3/4019-4/4020
Designed to provide a secure mounting solution for 1–4 Ericsson RRUs, with or without PSU. Single (4020), and double (4019-2) RRU mount can also be used in A2 confi gurations.
FlexibilityThe products can be mounted on circular or square tubes, as well as angle profi les. Single RRU mount (4020), can also be used for wall mounting.
Detailed design dataDetailed design data for this productcan be found at www.mafi .se.
How to OrderTo order this kit, please contact MAFI quoting article number:
4019-2 or E-order number (SEG): 60006844019-3 or E-order number (SEG): 60006854019-4 or E-order number (SEG): 60006864020 or E-order number (SEG): 6000683
Contact information can be found at www.mafi .se.
Rev 4
MAFI 4019*RRU Mount Family
4019-4
4019-3
4019-2
4020
Parts list
Part MaterialQuantity4019-2
Quantity4019-3
Quantity4019-4
Quantity4020
Clamp S355MC FZV 4 4 4 2
Bracket S355MC FZV - 2 2 2
Bushing S355J2H FZV 4 8 8 -
Threaded Rod M10 8.8 FZV 4 4 4 4
Flange Bolt M10 A4 8 12 16 4
Fasteners 8.8 FZV Incl. Incl. Incl. Incl.
Package data
Product Length (mm/in) Width (mm/in) Height (mm/in) Weight (kg/lb)
4019-2 360/14.2 230/9.1 90/3.5 5.8/12.8
4019-3 430/16.9 360/14.2 60/2.4 10.6/23.4
4019-4 810/31.9 260/10.2 60/2.4 11.5/25.4
4020 230/9.1 210/8.3 85/3.3 4.3/9.5
Equipment weight
Compatible RRU-models
Parent pole/leg
© 2019–2020 MAFI AB. All rights reserved.
Content of kit 4019-4
Article 4019-2/4019-3/4019-4/4020
Ericsson RRU family or other units with horizontal c/c distance of 146 mm/5.75 in
4019-3/4019-4:40 × 40–80 × 80 mm1.6 × 1.6–3.1 × 3.1 in4020:35 × 35–80 × 80 mm1.4 × 1.4–3.1 × 3.1 in
4019-2: 2 × 35 kg/77.1 lb4019-3: 3 × 35 kg/ 77.1 lb4019-4: 4 × 35 kg/77.1 lb4020: 1 × 40 kg/88.2 lb
Rev 4
Content of kit 4019-3
Content of kit 4020
Content of kit 4019-2
4019-2:Ø 40–114 mmØ 1.6–4.5 in4019-3/4019-4/4020:Ø 25–114 mmØ 1–4.5 in
4019-2/4019-3/4019-4:40 x 40–80 x 80 mm1.6 × 1.6–3.1 × 3.1 in4020:35 × 35–80 x 80 mm1.4 × 1.4–3.1 × 3.1 in
4019-34019-2
40204019-4 EN 1090
© 2019–2020 MAFI AB. All rights reserved. © 2019–2020 MAFI AB. All rights reserved.
44 45Rev 4Article 4019-2/4019-3/4019-4/4020Rev 4 Article 4019-2/4019-3/4019-4/4020
© 2019–2020 MAFI AB. All rights reserved.
*Article 4036/4037
Designed to provide a secure mounting solution for oneEricsson RRU, or two RRUs with the optional Dual RRU support expansion, with or without PSU or A2/A3.
FlexibilityThe support can be used on a range of pole diameters withor without a PSU or A2/A3 attached to the backside of the RRU. It can also be mounted on angle irons as well as box sectional beams. The support is manufactured of high quality steel with hot dip galvanization treatment.
Detailed design dataDetailed design data for this productcan be found at www.mafi .se.
How to OrderTo order this kit, please contact MAFI quoting article number:
4036 or E-order number (SEG): 60008264037 or E-order number (SEG): 6000827
Contact information can be found at www.mafi .se.
4036Content of kit
4037 Option
Rev 1
MAFI 4036*Single/Dual RRU Support
Product options
4037: Dual RRU support expansion kit.
Parts list
Part Material Quantity 4036 Quantity 4037
Clamp S355MC FZV 4 -
Arm S355MC FZV 2 2
Bushing S355 FZV 6 6
Threaded rod M10 8.8 FZV 4 -
Bolt M10 8.8 FZV, A4 10 10
Fasteners 8.8 FZV Incl. Incl.
Package data
Product Length (mm/in) Width (mm/in) Height (mm(in) Weight (kg/lb)
4036 405/15.9 105/4.1 100/3.9 5.7/12.6
Tightening torque
Equipment weight
Compatible RRU-models
Parent pole/leg
© 2019–2020 MAFI AB. All rights reserved.
*Article 4036/4037
Ericsson RRUs and otherunits with horizontal c/c distance of 146 mm/5.7 in
35 × 35–80 × 80 mm1.4 × 1.4–3.1 × 3.1 in
35 × 35–80 × 80 mm1.4 × 1.4–3.1 × 3.1 in
Ø 35–114 mmØ 1.4–4.5 in
Threaded rods M10: 18 Nm
Bolts with bushings M10: 48 Nm
Flange bolts M10: 41 Nm
Maximum: 40 kg/88.2 lb
Rev 1
4036
© 2019–2020 MAFI AB. All rights reserved. © 2019–2020 MAFI AB. All rights reserved.
46 47Rev 1Rev 1 *Article 4036/4037*Article 4036/4037
48
© 2019–2020 MAFI AB. All rights reserved.
Antenna Brackets
MAFI 3058 GPS Mount
MAFI 5012, 5013 AIR Light Bracket
MAFI 3116 Antenna Offset
MAFI 5022, 5023 AIR Medium Bracket
MAFI 3117 Antenna Offset Large
MAFI 5030, 5031 AIR Heavy Bracket
© 2019–2020 MAFI AB. All rights reserved.
Article 3058
Designed to carry a GPS unit attached to a vertical or inclined structural leg member.
FlexibilityThe support is designed with slotted holes on the back clamp for easy pre-assembling on ground. Tiltable up to 10°.
Detailed design dataDetailed design data for this productcan be found at www.mafi .se.
How to OrderTo order this kit, please contact MAFI quoting article number:
3058 or E-order number (SEG): 6956996
Contact information can be found at www.mafi .se.
Content of kit
Rev 1
MAFI 3058GPS Mount
Tilting possibility
© 2019–2020 MAFI AB. All rights reserved.
49Rev 1Article 3058
Parts list
Part Material Quantity
O� set arm S355MC FZV 1
Clamp S355MC FZV 2
Threaded Rod M10 8.8 FZV 2
Fasteners 8.8 FZV Incl.
Package data
Product Length (mm/in) Width (mm/in) Height (mm/in) Weight (kg/lb)
3058 420/16.5 100/3.9 110/4.3 2.6/5.7
Tilting
Equipment weight
Parent pole/leg
© 2019–2020 MAFI AB. All rights reserved.
Article 3058
Maximum 2 kg/4.4 lb
35 × 35–80 × 80 mm1.4 × 1.4–3.2 × 3.2 in
Maximum 10°
Rev 1
Ø 25–114 mmØ 1–4.5 in
35 × 35–80 × 80 mm1.4 × 1.4–3.2 × 3.2 in
3058
Rev 5
© 2019–2020 MAFI AB. All rights reserved.
*Article 3115/3116/31154
Designed to allow for radios to be mounted behind a panel antenna without any extra equipment pole.
FlexibilityThe offset bracket can handle a wide range of towerand mast leg sections. The bracket fi ts either directlyagainst the antenna or tilt brackets if used.The optional 31154 antenna adapter kit allows mounting of antennas with 150 mm/5.9 in c/c fi xings in the vertical plane.
Detailed design dataDetailed design data for this productcan be found at www.mafi .se.
How to OrderTo order this kit, please contact MAFI quoting article number:
3115 or E-order number (SEG): 60625143116 or E-order number (SEG): 600095131154 or E-order number (SEG): 6000883
Contact information can be found at www.mafi .se.
MAFI 3115*AntennaOffset
3115Content of kit
3115 with option 31154, antenna adapter kit
3116Content of kit
© 2019–2020 MAFI AB. All rights reserved. © 2019–2020 MAFI AB. All rights reserved.
50 51Rev 5*Article 3115/3116/31154Rev 1 Article 3058
Parts list
Part Material Quantity
O� set plate S355MC FZV 2
Clamp S355MC FZV 2
U-bolt A4 or 8.8 FZV 2
Fasteners 8.8 FZV and A4 Incl.
Package data
Product Length (mm/in) Width (mm/in) Height (mm/in) Weight (kg/lb)
3115 250/9.8 150/5.9 100/3.9 4/8.8
3116 178/7 175/6.9 82/3.2 3.2/7.1
Product options
31154: Antenna adapter kit. Optional for both 3115 and 3116.
Rev 5
Tightening torque
Parent pole/leg
© 2019–2020 MAFI AB. All rights reserved.
*Article 3115/3116/31154
Ø 25–76.1 mmØ 1–3 in
U-bolt M12: 31 Nm
3115/3116
Option: 31154
3115
3116 EN 1090
Ultimate Torque Capacity per Bracket
Parent Pole ø (mm/in) Torque (Nm)
25/1 77
42.3/1.7 152
48.3/1.9 178
60.3/2.4 230
76.1/3 298
Rev 5
© 2019–2020 MAFI AB. All rights reserved.
*Article 3115/3116/31154
Design resistance dataThe load limits given in this data sheet apply to the MAFI product only. The designer should always check thatthe supporting structure can safely carry the loads appliedto it by the MAFI product.
Vertical loadMax Supported Equipment mass = 50 kg/110.2 lb
Ultimate Transient Man-Load = 2.4 kN
Rotational slip resistanceWhen high side forces can be expected, use the tables below to check for rotational slip when mounting on a circular pole. Use ultimate loads and equipment offset to calculatethe applied torque.
Mresisting
Fwind
© 2019–2020 MAFI AB. All rights reserved. © 2019–2020 MAFI AB. All rights reserved.
52 53Rev 5 Rev 5*Article 3115/3116/31154*Article 3115/3116/31154
Rev 1
© 2019–2020 MAFI AB. All rights reserved.
Article 3117
Designed to allow for radios to be mounted behind a panel antenna without any extra equipment pole.
FlexibilityThis larger version of antenna offset can handle a wide range of tower and mast leg section. The brackets hole pattern fi ts either directly against the antenna or tilt brackets if used.The antenna offset large is suitabel for larger and heavier antennas. The optional 31154 antenna adapter kit allows mounting of antennas with 150 mm/5.9 in c/c fi xings in the vertical plane.
Detailed design dataDetailed design data for this productcan be found at www.mafi .se.
How to OrderTo order this kit, please contact MAFI quoting article number:
311731154 or E-order number (SEG): 6000883
Contact information can be found at www.mafi .se.
MAFI 3117AntennaOffset Large
3117Content of kit
3117 with option 31154, antenna adapter kit
Parts list
Part Material Quantity
O� set plate S355MC FZV 2
Clamp S355MC FZV 2
Threaded rod M10 8.8 FZV 4
Fasteners 8.8 FZV and A4 Incl.
Package data
Product Length (mm/in) Width (mm/in) Height (mm/in) Weight (kg/lb)
3117 280/11 180/7.1 120/4.7 6.2/13.7
Product options
31154: Antenna adapter kit.
Rev 1
Tightening torque
Parent pole/leg
© 2019–2020 MAFI AB. All rights reserved.
Article 3117
Ø 42.3–114.3 mmØ 1.7–4.5 in
Threaded rods M10: 26 Nm
Option: 31154
3117
© 2019–2020 MAFI AB. All rights reserved. © 2019–2020 MAFI AB. All rights reserved.
54 55Rev 1Article 3117Article 3117Rev 1
Rev 1
Ultimate Torque Capacity per Bracket
Parent Pole ø (mm/in) Torque (Nm)
42.3/1.7 152
48.3/1.9 178
60.3/2.4 230
76.1/3 298
88.9/3.5 353
101.6/4 408
114.3/4.5 462
© 2019–2020 MAFI AB. All rights reserved.
Article 3117
Design resistance dataThe load limits given in this data sheet apply to the MAFI product only. The designer should always check thatthe supporting structure can safely carry the loads appliedto it by the MAFI product.
Vertical loadMax Supported Equipment mass = 70 kg/154.3 lb
Ultimate Transient Man-Load = 2.4 kN
Rotational slip resistanceWhen high side forces can be expected, use the tables below to check for rotational slip when mounting on a circular pole. Use ultimate loads and equipment offset to calculatethe applied torque.
Mresisting
Fwind
5012
5013 pole mount
5012 wall mount, down tilt 5012 pole mount, up tilt
Performance
Maximum equipmentweight: 30 kg/66 lb
Maximum horizontal reactionforce: 800 N50 × 50–80 × 80 mm
2 x 2–3.1 x 3.1 in50 × 50–80 × 80 mm2 x 2–3.1 x 3.1 in
Ø 76–114 mmØ 3–4.5 in
Parent pole/leg
5013
5012
© 2017 MAFI AB. All rights reserved.
Article MAFI 5012/5013
Brackets for mounting an AIR unit with a maximum weight of 30 kg/66 lb.Both brackets provide ±30° azimuth adjustment and can be mounted on a wall, circular member, angle member or box beam section. 5012 also provide tilting of the unit ±30°.
Rev 1
5013
MAFI 5012, 5013AIR Light Bracket
© 2019–2020 MAFI AB. All rights reserved. © 2019–2020 MAFI AB. All rights reserved.
56 57Rev 1Article MAFI 5012/5013Rev 1 Article 3117
5022
5023 pole mount
5022 wall mount, down tilt 5022 pole mount, up tilt
Parent pole/leg Performance
50 × 50–80 × 80 mm2 x 2–3.1 x 3.1 in
50 × 50–80 × 80 mm2 x 2–3.1 x 3.1 in
Maximum equipment weight: 70 kg/154 lb.
Maximum horizontal reaction force: 2 000 NvØ 76–114 mm
Ø 3–4.5 in
6024
6022
© 2019–2020 MAFI AB. All rights reserved.
Article MAFI 5022/5023
Brackets for mounting an AIR unit with a maximum weight of 70 kg/154 lb.Both brackets provide ±30° azimuth adjustment and can be mounted on a wall, circular member, angle member or box beam section.5022 also provide tilting of the unit ±20°.
Rev 1
5023
MAFI 5022, 5023AIR Medium Bracket
5030
50315031 pole mount
5030 pole mount 5030 pole mount, down tilt
Parent pole/leg Performance
50 × 50–100 × 100 mm2 x 2–3.9 x 3.9 in
50 × 50–100 × 100 mm2 x 2–3.9 x 3.9 in
Maximum equipmentweight: 120 kg/264 lb
Maximum horizontalreaction force: 2 000 NØ 76–120 mm
Ø 3–4.7 in
5030
5031
© 2019–2020 MAFI AB. All rights reserved.
Article MAFI 5030/5031
Brackets for mounting an AIR unit with a maximum weight of 120 kg/264 lb.Both brackets provide ±30° azimuth adjustment and can be mounted on a wall, circular member, angle member or box beam section. 5030 also provide tilting of the unit ±20°.
Rev 1
MAFI 5030, 5031AIR Heavy Bracket
© 2019–2020 MAFI AB. All rights reserved. © 2019–2020 MAFI AB. All rights reserved.
58 59Article MAFI 5030/5031Article MAFI 5022/5023 Rev 1Rev 1
Wall Mount Solutions
© 2019–2020 MAFI AB. All rights reserved.
Article 3541
Designed for mounting an equipment pole on a wall.The kit is dimensioned to carry medium-weighttubes and equipment mounted between the wall brackets.The kit consists of a pair of brackets withall necessary U-bolts.
FlexibilityThe product can be mounted either directly to brickor concrete walls, or using through-mounts with back plates. Equipment poles can range from Ø 60–114 mm/2.4–4.5 in.
Detailed design dataDetailed design data for this productcan be found at www.mafi .se.
How to OrderTo order this kit, please contact MAFI quoting article number:
3541 or E-order number (SEG): 6062659
Contact information can be found at www.mafi .se.
Content of kit
Rev 4
MAFI 3541MediumDuty Wall Mount
MAFI 3541 Medium Duty Wall Mount
MAFI 43692 Corner Wall Mount
MAFI 3544 Large Offset Wall Mount
MAFI 8057 Wall Mounted Cabinet Platform
MAFI 2414 Heavy Duty Wall Mount
© 2019–2020 MAFI AB. All rights reserved. © 2019–2020 MAFI AB. All rights reserved.
60 61Rev 4Article 3541
Parts list
Part Material Quantity
Wall bracket S355MC FZV 2
U-bolt M12 A4 or 8.8 FZV 4
Nut M12 8.8 FZV 16
Washer 8.8 FZV 12
Package data
Product Length (mm/in) Width (mm/in) Height (mm/in) Weight (kg/lb)
3541 385/15.2 300/11.8 90/3.5 4.9/10.8
Product options
Tubes of various lengths, diameters and wall thicknesses can be ordered from MAFI.
Tightening torque
Equipment pole
© 2019–2020 MAFI AB. All rights reserved.
Article 3541
Ø 60–114.3 mmØ 2.4–4.5 in
U-bolts: 15 Nm
Rev 4
3541 EN 1090
Ultimate Torque Capacity per bracket
Parent Pole ø (mm/in) Torque (Nm)
60.3/2.4 115
76.1/3 159
88.9/3.5 176
101.6/4 204
114.3/4.5 231
© 2019–2020 MAFI AB. All rights reserved.
Article 3541
Design resistance dataThe load limits given in this data sheet apply to the MAFI product only. The designer should always check thatthe supporting structure can safely carry the loads appliedto it by the MAFI product.
Vertical loadMax Supported Equipment mass = 100 kg/220 lb
Reaction force Ultimate lateral reaction force (Flat) : 1200 N per bracket
Rotational slip resistanceWhen high side forces can be expected, use the table belowto check for rotational slip when mounting on a circular pole. Use ultimate loads to calculate the applied torque.
Flat
Rev 4
Fmass
Mresisting
© 2019–2020 MAFI AB. All rights reserved. © 2019–2020 MAFI AB. All rights reserved.
62 63Rev 4 Rev 4Article 3541Article 3541
© 2019–2020 MAFI AB. All rights reserved.
Article 3544
Designed for mounting an equipment pole on a wall whena large clearance is required. The product is dimensionedto carry medium-weight tubes and equipment mounted between the wall brackets. The kit consists of a pairof brackets with all necessary U-bolts.
FlexibilityThe product can be mounted either directly to brick or concrete walls, or using through-mounts with back plates.Equipment poles can range from Ø 60–114 mm/2.4–4.5 in.
Detailed design dataDetailed design data for this productcan be found at www.mafi .se.
How to OrderTo order this kit, please contact MAFI quoting article number:
3544 or E-order number (SEG): 6062518
Contact information can be found at www.mafi .se.
Rev 3
MAFI 3544Large Offset Wall Mount
Content of kit
Parts list
Part Material Quantity
Wall bracket S355MC FZV 2
U-bolt M12 A4 or 8.8 FZV 4
Nut M12 8.8 FZV 16
Washer 8.8 FZV 12
Package data
Product Length (mm/in) Width (mm/in) Height (mm/in) Weight (kg/lb)
3544 590/23.2 450/17.7 150/5.9 13.8/30.4
Product options
Tubes of various lengths, diameters and wall thicknesses can be ordered from MAFI.
Tightening torque
Equipment pole
© 2019–2020 MAFI AB. All rights reserved.
Article 3544
Ø 60–114.3 mmØ 2.4–4.5 in
U-bolts: 23 Nm
Rev 3
3544 EN 1090
© 2019–2020 MAFI AB. All rights reserved. © 2019–2020 MAFI AB. All rights reserved.
64 65Rev 3Article 3544Article 3544Rev 3
Ultimate Torque Capacity per Bracket
Parent Pole ø (mm/in) Torque (Nm)
60.3/2.4 172
76.1/3 223
88.9/3.5 264
101.6/4 306
114.3/4.5 346
© 2019–2020 MAFI AB. All rights reserved.
Article 3544
Design resistance dataThe load limits given in this data sheet apply to the MAFI product only. The designer should always check thatthe supporting structure can safely carry the loads appliedto it by the MAFI product.
Vertical loadMax Supported Equipment mass = 100 kg/220 lb
Ultimate Transient Man-Load = 2.4 kN
Reaction force Ultimate lateral reaction force (Flat) : 2300 N per bracket
Rotational slip resistanceWhen high side forces can be expected, use the table belowto check for rotational slip when mounting on a circular pole. Use ultimate loads to calculate the applied torque.
Rev 3
Mresisting
Fmass
Flat
© 2019–2020 MAFI AB. All rights reserved.
Article 2414
Designed to provide a pole mount on a wall.The productis dimensioned to carry heavy poles and equipment.
FlexibilityThe product can be mounted either directly bolted to brickor concrete walls or using through-mounts with reinforcementon the back.
Detailed design dataDetailed design data for this productcan be found at www.mafi .se.
How to OrderTo order this kit, please contact MAFI quoting article number:
2414 or E-order number (SEG): 6000693
Contact information can be found at www.mafi .se.
Content of kit
Rev 4
MAFI 2414Heavy DutyWall Mount
© 2019–2020 MAFI AB. All rights reserved. © 2019–2020 MAFI AB. All rights reserved.
66 67Rev 4Article 2414Rev 3 Article 3544
Parts list
Part Material Quantity
Cantilever S355MC FZV 2
Support plate S355MC FZV 8
Bushing S355JR FZV 4
U-bolt, M12 8.8 FZV 4
Bolt, M16 8.8 FZV 4
Nut, M16/M12 8.8 FZV 24
Package data
Product Length (mm/in) Width (mm/in) Height (mm/in) Weight (kg/lb)
2414 385/15.2 295/11.6 200/7.9 17/37.5
Product options
Tubes of various lengths, diameters and wall thicknesses can be ordered from MAFI.
Tightening torque
Equipment pole
Mounting structure
© 2019–2020 MAFI AB. All rights reserved.
Article 2414
Ø 101.6–114.3 mmØ 4–4.5 in
Brick and concrete walls.
U-bolts M12: 31 Nm
Bolts M16: 150 Nm
Rev 4
2414 EN 1090
Ultimate Torque Capacity per Cantilever
Parent Pole ø (mm/in) Torque (Nm)
101.6/4 816
114.3/4.5 924
© 2019–2020 MAFI AB. All rights reserved.
Article 2414
Design resistance dataThe load limits given in this data sheet apply to the MAFI product only. The designer should always check thatthe supporting structure can safely carry the loads appliedto it by the MAFI product.
Vertical loadConfi guration 1: Max supported equipment mass (Fmass) = 500 kg/1102.3 lb Ultimate Transient Man-Load = 2400 NConfi guration 2:Max supported equipment mass (Fmass) = 240 kg/529.1 lbUltimate FRd (reaction force to Fwind)= 12000 NUltimate Transient Man-Load = 2400 N
Rotational slip resistanceIn some cases the equipment pole can suffer torque loading; in these cases it is important to verify that the pole will not slip. To check this, the data from the torque resistance table canbe used. The table opposite gives the ultimate torque capacity per cantilever for different pole diameters.
Mresisting
Fmass
Fwind
FRd
Confi guration 2
Confi guration 1
Fmass
Rev 4
© 2019–2020 MAFI AB. All rights reserved. © 2019–2020 MAFI AB. All rights reserved.
68 69Rev 4Article 2414Rev 4 Article 2414
Content of kit
© 2019–2020 MAFI AB. All rights reserved.
Article 43692
Designed to provide a pole mount at the corner of a wall with a clearance of 50 mm/2 ines. The product is dimensioned to carry medium-weight tubes and equipment mounted between the wall brackets. The kit consists of a pair of brackets with all necessary U-bolts.
FlexibilityThe product can be mounted either directly to brick or concrete walls, or using though-mounts with back plates.Equipment poles can range from Ø 60–114 mm/2.4–4.5 in.
Detailed design dataDetailed design data for this productcan be found at www.mafi .se.
How to OrderTo order this kit, please contact MAFI quoting article number:
43692 or E-order number (SEG): 6000694
Contact information can be found at www.mafi .se.
Rev 3
MAFI 43692Corner Wall Mount
Parts list
Part Material Quantity
Wall bracket S355MC FZV 2
U-bolt M12 A4 or 8.8 FZV 4
Nut M12 8.8 FZV 16
Washer 8.8 FZV 8
Package data
Product Length (mm/in) Width (mm/in) Height (mm/in) Weight (kg/lbs)
43692 800/31.5 600/23.6 340/13.4 12.5/27.6
Product options
Tubes of various lengths, diameters and wall thicknesses can be ordered from MAFI.
Tightening torque
Equipment pole
© 2019–2020 MAFI AB. All rights reserved.
Article 43692
Ø 60–114.3 mmØ 2.4–4.5 in
U-bolts M12: 31 Nm
Rev 3
43692 EN 1090
© 2019–2020 MAFI AB. All rights reserved. © 2019–2020 MAFI AB. All rights reserved.
70 71Rev 3Article 43692Rev 3 Article 43692
Ultimate Torque Capacity per Bracket
Parent Pole ø (mm/in) Torque (Nm)
60.3/2.4 230
76.1/3 298
88.9/3.5 353
101.6/4 408
114.3/4.5 462
© 2019–2020 MAFI AB. All rights reserved.
Article 43692
Design resistance dataThe load limits given in this data sheet apply to the MAFI product only. The designer should always check thatthe supporting structure can safely carry the loads appliedto it by the MAFI product.
Vertical loadMax Supported Equipment mass = 100 kg/220 lbs.
Ultimate Transient Man-Load = 2.4 kN
Reaction force Ultimate lateral reaction force (Flat) : 2300 N per bracket
Rotational slip resistanceWhen high side forces can be expected, use the table belowto check for rotational slip when mounting on a circular pole. Use ultimate loads to calculate the applied torque.
Flat
Fmass
Mresisting
Rev 3
© 2019–2020 MAFI AB. All rights reserved.
Article 8057
Designed as a lightweight wall-mount platform to carry small and medium sized cabinets.
FlexibilityThe elongated slots and slidable cross beams allow you to create the hole pattern you need for any cabinet.
Detailed design dataDetailed design data for this product can be found atwww.mafi .se
How to OrderTo order kit, please contact MAFI quoting article number:
8057
Contact information can be found at www.mafi .se.
Design resistance dataThe load limits given in this data sheet apply to the MAFI product only. The designer should always check thatthe supporting structure can safely carry the loads appliedto it by the MAFI product.
Rev 1
Content of kit
MAFI 8057WallMountedCabinetPlatform
© 2019–2020 MAFI AB. All rights reserved. © 2019–2020 MAFI AB. All rights reserved.
72 73Rev 1Article 8057Rev 3 Article 43692
Free Stander
Fixed
75
© 2019–2020 MAFI AB. All rights reserved.
Parts list
Part Material Quantity
Steel beam, long S355MC FZV 2
Steel beam, short S355MC FZV 4
L-pro� le 65 x 65 x 7 S355MC FZV 2
L-pro� le 50 x50 x5 S355MC FZV 2
Fasteners 8.8 FZV Incl.
Package data
Product Length (mm/in) Width (mm/in) Height (mm/in) Weight (kg/lb)
8057 1400/55.1 800/31.5 350/13.8 57/ 125.7
Cabinet bolt dimension
Tightening torque
Bolt M12: 80 Nm
Equipment weight
Maximum per section:300 kg/661.4 lb
Maximum in total:600 kg/1322.8 lb
© 2019–2020 MAFI AB. All rights reserved.
Article 8057
Maximum M12
Rev 1
Fsection Fsection
8057
Rooftop Solutions
MAFI 2230 Telescopic Strut Support
MAFI 3022 Adapter Beams
MAFI 3510 Rafter Bracket Kit
MAFI 4316 Single Pole
MAFI 4112 Free Stander Light
MAFI 91110 Extra Pole Kit
MAFI 4309 Free Stander Medium
MAFI 8051 Small Adjustable Cabinet Platform
MAFI 4310 Free Stander Platform
MAFI 4600 Free standing Corner Mount
© 2019–2020 MAFI AB. All rights reserved.
74 Rev 1 Article 8057
© 2019–2020 MAFI AB. All rights reserved.
*Article 2230/2231/2232/2233/2234/2235
Designed to provide fl exible bracing to a pole.The support can be fi tted as part of a new installation or retrofi tted to an existing pole. All that is required is two structural attachment points within reach of the pole.The attachment points can be horizontal, vertical or anything in between. The kit consists of a pair of telescopic struts with feet and a pole attachment bracket.
FlexibilityThe 2230-family comprises three lengths of struts and two standard sizes of pole attachment clamps availableto fi t poles with Ø 76 or 114 mm/3 in or 4.5 in.Please see the table on the next page.An optional pole attachment clamp is the 3396 that fi ts poles up to Ø 76 mm/3 in.
Detailed design dataDetailed design data for this productcan be found at www.mafi .se.
How to OrderTo order this kit, please contact MAFI quoting article number:
2230 or E-order number (SEG): 60008652231 or E-order number (SEG): 60008662232 or E-order number (SEG): 60008672233 or E-order number (SEG): 60008682234 or E-order number (SEG): 60008692235 or E-order number (SEG): 6000870
Contact information can be found at www.mafi .se.
Content of kitOption: 4328
Rev 2
MAFI 2230*Telescopic Strut Support
Parts list
Part Material Quantity
Strut S355 FZV 2
Strut foot S355MC FZV 2
Clamp S355MC FZV 2
U-bolt M12 A4 or 8.8 FZV 2
Bolt M12 8.8 FZV 4
Fasteners 8.8 FZV Incl.
Package data
Product Length (mm/in) Width (mm/in) Height (mm/in) Weight (kg/lb)
2230/2233 1100/43.3 160/6.3 100/3.9 13.8/30.4
2231/2234 2100/82.7 160/6.3 100/3.9 20.3/44.8
2232/2235 3100/122 160/6.3 100/3.9 26.8/59.1
Product options
4328: Equipment pole foot.
3396: 2 sets of clamps for tubes up to Ø 76.1 mm/3 in.
2240: Strut support for tube Ø 76.1 mm/3 in.
2250: Strut support for tube Ø 114.3 mm/4.5 in.
Tubes of various lengths, diameters and wall thicknesses can be ordered from MAFI.
Product X Length (m/ft)Clamp widthØ (mm/in)
2230 1.0–1.4/3.3–4.6 76/3
2231 2.0–2.4/6.6–7.9 76/3
2232 3.0–3.4/9.8–11.2 76/3
2233 1.0–1.4/3.3–4.6 114/4.5
2234 2.0–2.4/6.6–7.9 114/4.5
2235 3.0–3.4/9.8–11.2 114/4.5
Tightening torque
Strut lengthand clamp width
Equipment pole
© 2019–2020 MAFI AB. All rights reserved.
*Article 2230/2231/2232/2233/2234/2235
2230, 2232:Ø 76.1 mmØ 3 in
2233, 2235:Ø 114.3 mmØ 4.5 inOptional up to Ø 76 mm/3 in
U-bolt: 31 Nm Small
46 Nm Large
M12 screws: 80 Nm
M16 screws: 100 Nm
Clamp set Ø 76 mm
Clamp set Ø 114 mm
Rev 2
2233
2231
2232
2230
22352234 EN 1090
© 2019–2020 MAFI AB. All rights reserved. © 2019–2020 MAFI AB. All rights reserved.
76 77Rev 2Rev 2 *Article 2230/2231/2232/2233/2234/2235*Article 2230/2231/2232/2233/2234/2235
© 2019–2020 MAFI AB. All rights reserved.
*Article 2230/2231/2232/2233/2234/2235
Design resistance dataThe load limits given in this data sheet apply to the MAFI product only. The designer should always check thatthe supporting structure can safely carry the loads appliedto it by the MAFI product.
Load capacityEach strut is designed to take a maximum tension/compression force according to below:
Ø 76 mm/3 in tube clamp: Fstrut= 10 kN
Ø 114 mm/4.5 in tube clamp: Fstrut = 15 kN
Rev 1
FstrutFstrut
© 2019–2020 MAFI AB. All rights reserved.
Article 3022
Designed to work as adapter beams between pole or enclosure and already existing structural beams on site without drilling or welding.
FlexibilityThe adapter beams can be mounted either with clamps around existing structural beams, or with spacers and washers on the top flange when there is no space underneath the structural beams. Requires no drilling or welding on site.
Detailed design dataDetailed design data for this productcan be found at www.mafi .se.
How to OrderTo order this kit, please contact quoting
article number: 3022
Contact information can be found at www.mafi .se.
Content of kit
Rev 2
Option 4316
Enclosure mounted with clamps
Enclosure mounted with washers
MAFI 3022Adapter beams
© 2019–2020 MAFI AB. All rights reserved. © 2019–2020 MAFI AB. All rights reserved.
78 79Article 3022 Rev 2Rev 2 *Article 2230/2231/2232/2233/2234/2235
Parts list
Part Material Quantity
Adapter beam S355MC FZV 2
Clamp S355MC FZV 4
Threaded rod, M10 8.8 FZV 8
Spacer (5, 8 and 10 mm) S355MC FZV 24
Square washer, 12 mm S355MC FZV 8
Washer 8.8 FZV 16
Fasteners 8.8 FZV Incl.
Package data
Product Length (mm/in) Width (mm/in) Height (mm/in) Weight (kg/lb)
3022 1040/40.9 95/3.7 170/6.7 21/46.3
Product options
4316: Single pole 1.8 m/3.3 ft tall with foot.
Cabinet bolt dimension
Equipment weight
Tightening torque
© 2019–2020 MAFI AB. All rights reserved.
Article 3022
Maximum M12
Rev 2
Adapter beam top flange
ClampMaximum 450 kg/992.1 lb
Threaded rods M10: 18 Nm
Square washers, 12 mm: 26 NmAdapter beam bottom flange
3022 EN 1090
Torque and reaction force table
Load case Resistance torque MR Reaction force FR per bolt
1: Wind load side 4075 Nm 3485 N
2: Wind load front 6490 Nm 5455 N
© 2019–2020 MAFI AB. All rights reserved.
Article 3022
Design resistance dataThe load limits given in this data sheet apply to the MAFI product only. The designer should always check thatthe supporting structure can safely carry the loads appliedto it by the MAFI product.
Overturning resistanceFor these adapter beams the critical dimensioning parameter is the resistance torque and reaction forces when ultimate wind loads are acting on the equipment.
The numbers in the table may not be exceeded.
Rev 1
FWind (N)
MR (Nm)
FR(N) FR(N)
F Wind(N)
FR(N)
MR (Nm)
FR(N)
Load case 2: Wind load frontLoad case 1: Wind load side
© 2019–2020 MAFI AB. All rights reserved. © 2019–2020 MAFI AB. All rights reserved.
80 81Rev 2Article 3022Rev 2 Article 3022
© 2019–2020 MAFI AB. All rights reserved.
Article 3510
Designed to provide a pole mount on to rafters or roof trusses for tubes of Ø 60.3–114.3 mm/2.4–4.5 in.
FlexibilityThe product can be mounted directly on to the wooden structure using through-mounts with large square washers on the back. The kit consist of high quality steel parts with hot dip galvanization treatment or from acid proof stainless steel.
Detailed design dataDetailed design data for this productcan be found at www.mafi .se.
How to OrderTo order this kit, please contact MAFI quoting article number:
3510 or E-order number (SEG): 6000882
Contact information can be found at www.mafi .se.
Content of kit4328 Option
Rev 3
MAFI 3510RafterBracket Kit
Parts list
Part Material Quantity
Bracket S355MC FZV 4
Threaded rod M12 8.8 FZV 4
Threaded rod M8 A4 14
Fasteners 8.8 FZV Incl.
Package data
Product Length (mm/in) Width (mm/in) Height (mm/in) Weight (kg/lb)
3510 210/8.3 160/6.3 120/4.7 6/13.2
Product options
4328: Foot for equipment pole.
53001G: Rubber roof � ashing Ø 82–162 mm/ 3.2–6.4 in.
53003G: Rubber roof � ashing Ø 60–102 mm/2.4–4 in.
Tubes of various lengths, diameters and wall thicknesses can be ordered from MAFI.
Tightening torque
Equipment pole
Mounting structure
© 2019–2020 MAFI AB. All rights reserved.
Article 3510
Ø 60.3–114.3 mmØ 2.4–4.5 in
Wooden beams minimum:120 × 45 mm/4.7 × 8 in.
Threaded rods M12: 31 Nm
Threaded rods M8: 21 Nm
Rev 3
3510 EN 1090
© 2019–2020 MAFI AB. All rights reserved. © 2019–2020 MAFI AB. All rights reserved.
82 83Rev 3Article 3510Article 3510Rev 3
Ultimate Torque Capacity per Bracket
Parent Pole ø (mm/in) Torque (Nm)
60.3/2.4 230
76.1/3 298
88.9/3.5 353
101.6/4 408
114.3/4.5 462
© 2019–2020 MAFI AB. All rights reserved.
Article 3510
Design resistance dataThe load limits given in this data sheet apply to the MAFI product only. The designer should always check thatthe supporting structure can safely carry the loads appliedto it by the MAFI product.
Vertical loadUltimate Fmass resistance = 3000 N
Ultimate Transient Man-Load = 2400 N
Ultimate FRd (reaction force to Fwind)= 10000 N
Rotational slip resistanceIn some cases the equipment pole can suffer torque loading;in these cases it is important to verify that the pole will not slip. To check this, the data from the torque resistance table can be used. The table below gives the ultimate torque capacity per cantilever for different pole diameters.
Mresisting
Fwind
Fmass
FRd1
FRd2
Rev 3
© 2019–2020 MAFI AB. All rights reserved.
Article 4316
Designed to carry telecom equipment, either on a free standing platform or existing structutal beams with or without optional adaptor beams.
FlexibilityThe kit consists of a single 1.8 meter/5.9 ft pole with a diameter of 76.1 mm/3 in, fasteners and a foot.
Foot and pole assembly can be mounted on adaptor beams or a free stander allowing for secure mounting of equipment on, for example, a roof top. When mounted on the free stander 4310 the equipment pole is tiltable up to 6° for vertical alignment.
Detailed design dataDetailed design data for this productcan be found at www.mafi .se.
How to OrderTo order this kit, please contact MAFI quoting
article number: 4316
Contact information can be found at www.mafi .se.
Mounted on 3022
Rev 2
Mounted on 4310
MAFI 4316Single Pole
© 2019–2020 MAFI AB. All rights reserved. © 2019–2020 MAFI AB. All rights reserved.
84 85Rev 2Article 4316Rev 3 Article 3510
Parts list
Part Material Quantity
Foot base S355MC FZV 1
Tube P235TR1 FZV 1
Fasteners 8.8 FZV Incl.
Top-hat Pole cover Polyethylene 1
Package data
Product Length (mm/in) Width (mm/in) Height (mm/in) Weight (kg/lb)
4316 1850/72.8 350/13.8 230/9.1 27/59.5
Tightening torque
Equipment pole
Equipment weight
Compatible products
© 2019–2020 MAFI AB. All rights reserved.
Article 4316
View mounting instructions.
Ø 76.1 × 4.5 mmØ 3 × 0.2 in
Rev 2
Maximum 285 kg/628.3 lb.
MAFI products 3022and 4310.
4316 EN 1090
© 2019–2020 MAFI AB. All rights reserved.
Article 4316
Design resistance dataThe load limits given in this data sheet apply to the MAFI product only. The designer should always check thatthe supporting structure can safely carry the loads appliedto it by the MAFI product.
Overturning momentFor this single pole the critical dimensioning parameter is the ability to resist overturning.The overturning moment need to be higher than the moment applied by the ultimate wind loads acting on the pole andthe supported equipment.
Fwind (N)
MR (Nm)
Rev 2
Overturning moment table
Overturning moment MR (Nm) 1720 Nm
© 2019–2020 MAFI AB. All rights reserved. © 2019–2020 MAFI AB. All rights reserved.
86 87Rev 2Article 4316Rev 2 Article 4316
© 2019–2020 MAFI AB. All rights reserved.
*Article 4112/41121
Designed as a free standing equipment pole for lowwind-load generating equipment such as RRUs placedin areas of low risk. The 4112 is assembled on siteallowing it to be carried by one man alone in components weighing less than 25 kg/55.1 lb.
FlexibilityThe pole on the free stander light is tiltable up to 6°,so that the pole will always be vertical.
Detailed design dataDetailed design data for this productcan be found at www.mafi .se.
How to OrderTo order this kit, please contact MAFI quoting article number:
4112 or E-order number (SEG): 6062548
Contact information can be found at www.mafi .se.
Content of kit 4112
Rev 3
Content of kit 41121
MAFI 4112*Free Stander Light
Parts list
Part Material Quantity 4112 Quantity 41121
Steel plate S355MC FZV 2 2
Nut M12 8.8 FZV 19 19
Threaded rod M12 8.8 FZV 3 3
Ballast weight Concrete 3 × 20 kg/44.1 lb 3 x 20 kg/44.1 lb
Screw M12 8.8 FZV 2 2
Washer 8.8 FZV 9 9
Protective mat - 1 1
Tube 1000 mm/3.3 ft P235TR1 FZV 1 -
Package data
Product Length (mm/in) Width (mm/in) Height (mm/in) Weight (kg/lb)
4112 1200/47.2 800/31.5 340/13.4 122/269
41121 1200/47.2 800/31.5 340/13.4 118/260.1
Tightening torque
Equipment pole
© 2019–2020 MAFI AB. All rights reserved.
*Article 4112/41121
Ø 60.3 mmØ 2.4 in
Threaded rods: 35 Nm
Grub screws: 10 Nm
Rev 3
4112
41121 EN 1090
© 2019–2020 MAFI AB. All rights reserved. © 2019–2020 MAFI AB. All rights reserved.
88 89Rev 3*Article 4112/41121Rev 3 *Article 4112/41121
© 2019–2020 MAFI AB. All rights reserved.
*Article 4112/41121
Design resistance dataThe load limits given in this data sheet apply to the MAFI product only. The designer should always check thatthe supporting structure can safely carry the loads appliedto it by the MAFI product.
Overturning momentFor this free standing structure the critical dimensioning parameter is the ability to resist overturning moment.The fi gures in the table need to be higher than the moment applied by the ultimate wind loads acting on the pole andthe supported equipment. A stability calculation should be done in every case – if you need help, please contact MAFI.
Fwind
MO
Rev 2
Overturning moment table
Con� guration Overturning moment MO (Nm)
3 concrete blocks of each 20 kg/44.1 lb 265
© 2019–2020 MAFI AB. All rights reserved.
*Article 4309/43091/43092
Designed to carry antennas and other equipment on places where a free standing structure is suitable.
FlexibilityThe ballast in the structure can be varied to suit the windload and there’s a lot of space for mounting equipment.The equipment pole is tiltable up to 6° to so that the polecan be kept vertical.
Detailed design dataDetailed design data for this productcan be found at www.mafi .se.
How to OrderTo order this kit, please contact MAFI quoting article number:
4309 or E-order number (SEG): 60625644309143092 or E-order number (SEG): 6062656
Contact information can be found at www.mafi .se.
4309 with option 43090 and 1 layer option 42071
Rev 6
4309 with 1 layer option 42071
43091 with 1 layer option 42071
43092
MAFI 4309*Free StanderMedium
© 2019–2020 MAFI AB. All rights reserved. © 2019–2020 MAFI AB. All rights reserved.
90 91Rev 6*Article 4309/43091/43092Rev 3 *Article 4112/41121
Parts list
Part MaterialQuantity4309
Quantity43091
Quantity43092
Pocket S355MC FZV 4 4 4
Cross S355MC FZV 1 1 1
Foot S355MC FZV 1 1 1
Tube, 3000 mm/118.1 in P235TR1 FZV 1 - -
Tube, 1000 mm/39.4 in P235TR1 FZV - 1 -
Strut S355MC/P235TR1 FZV 4 - 4
Protective mat Polyethylene 1 1 1
Fasteners 8.8 FZV Incl. Incl. Incl.
Product options
43090: Corner pockets to increase base width and weight.
42071: Concrete blocks to increase ballast weight.
Tubes of various lengths can be ordered from MAFI.
Package data
Product Length (mm/in) Width (mm/in) Height (mm/in) Weight (kg/lb)
4309Tube packed separately
1200/47.2 800/31.5 340/13.4 111/244.7
43091 1200/47.2 800/31.5 340/13.4 94.9/209.2
43092 1200/47.2 800/31.5 340/13.4 100.7/222 43091
430924309 EN 1090
Equipment pole
© 2019–2020 MAFI AB. All rights reserved.
*Article 4309/43091/43092
76.1 × 2.9 mm3 x 0.1 in
Maximum tilt 6°
Tilting
Rev 6
4309, 43091, 43092
43091 4309
Overturning moment table
Con� gurationOverturningresistance MRd (Nm)
4 concrete blocks* (Half ballast). 1000
8 concrete blocks* (Full ballast). 1600
16 concrete blocks* (Full ballast togetherwith option 43090).
3750
© 2019–2020 MAFI AB. All rights reserved.
*Article 4309/43091/43092
Design resistance dataThe load limits given in this data sheet apply to the MAFI product only. The designer should always check thatthe supporting structure can safely carry the loads appliedto it by the MAFI product.
Overturning resistanceFor this free standing structure the critical dimensioning parameter is the ability to resist overturning.The fi gures in the table need to be higher than the moment applied by the ultimate wind loads acting on the pole andthe supported equipment.
The roof structure should to be checked by an engineerto confi rm that it can withstand the total weight of the structure. Also it should be confi rmed that the frictionbetween the free stander's rubber mat and the roof is enoughto prevent sliding.
Fwind
MRd
Rev 6
*) Each concrete block must weigh at least 25 kg/55 lb.
© 2019–2020 MAFI AB. All rights reserved. © 2019–2020 MAFI AB. All rights reserved.
92 93Rev 6*Article 4309/43091/43092Rev 6 *Article 4309/43091/43092
MAFI 4112*Free Stander Light
© 2019–2020 MAFI AB. All rights reserved.
Article 4310
Designed to carry equipment on places where a free standing structure is suitable. The platform comes with a rubber mat to prevent sliding and to protect the underlaying surface.
FlexibilityThe ballast in the structure can be varied to suit the wind load and there is plenty of space for mounting equipment.Cross pattern is designed for 4316. When used together the equipment pole is tiltable up to 6° for a vertical alignment.
Detailed design dataDetailed design data for this productcan be found at www.mafi .se.
How to OrderTo order this kit, please contact MAFI quoting
article number: 4310
Contact information can be found at www.mafi .se.
Content of kit
Rev 2
Option 43090 and MAFI 42071 Option 4316
MAFI 4310Free StanderPlatform
Parts list
Part Material Quantity
Pocket S355MC FZV 4
Cross S355MC FZV 1
Protective mat 1
Fasteners 8.8 FZV Incl.
Package data
Product Length (mm/in) Width (mm/in) Height (mm/in) Weight (kg/lb)
4310 1200/47.2 800/31.5 340/13.4 65.7/144.8
Product options
4316: Single pole 1.8 m/5.9 ft tall with foot.
43090: Extra ballast pockets to increase base width and weight.
42071: Ballast concrete block 500 × 500 × 50 mm/19.7 × 19.7 × 2 in.
Tightening torque
© 2019–2020 MAFI AB. All rights reserved.
Article 4310
View mounting instructions.
Rev 2
4310 EN 1090
© 2019–2020 MAFI AB. All rights reserved. © 2019–2020 MAFI AB. All rights reserved.
94 95Rev 2Article 4310Article 4310Rev 2
© 2019–2020 MAFI AB. All rights reserved.
Article 4310
Design resistance dataThe load limits given in this data sheet apply to the MAFI product only. The designer should always check thatthe supporting structure can safely carry the loads appliedto it by the MAFI product.
Overturning momentFor this free standing structure the critical dimensioning parameter is the ability to resist overturning.The overturning moment need to be higher than the moment applied by the ultimate wind loads acting on the equipped free stander.
Overturning moment table
Con� gurationOverturningmoment MR (Nm)
4 concrete blocks (Half ballast). 870
8 concrete blocks (Full ballast). 1470
Extra ballast pockets 43090 and 12 concrete blocks 2070
Fwind (N)
MR (Nm)
Rev 2
© 2019–2020 MAFI AB. All rights reserved.
*Article 4600/4601/4602
Designed to provide mounting oportunity for antennasand other equipment on locations where free standing solutions are needed.
FlexibilityThe structure is designed to support equipment-carrying tubes using ballast as counter weight. This provides mounting opportunity without penetrating weatherproofi ng layers on rooftops. Adjustable ballast-carrying cross beams makeit possible to account for different sizes of concrete blocks depending on availability. The interface between the frame and the equipment pole is a cone-shaped folded steel sheet that provides a three-point contact even when tilting so that the pole can be kept vertical if the surface is sloping.
Detailed design dataDetailed design data for this productcan be found at www.mafi .se.
How to OrderTo order this kit, please contact MAFI quoting article number:
4600 or E-order number (SEG): 60006894601 or E-order number (SEG): 60006904602 or E-order number (SEG): 6000691
Contact information can be found at www.mafi .se.
Content of kit
4602 4600
91124Optional
4601
Rev 4
4600*Free standing Corner Mount
© 2019–2020 MAFI AB. All rights reserved. © 2019–2020 MAFI AB. All rights reserved.
96 97Rev 4*Article 4600/4601/4602Rev 2 Article 4310
Parts list
Part MaterialQuantity4600
Quantity4601
Quantity4602
Cone S355MC FZV 1 1 1
Frame side S355J2H FZV 4 4 4
Cross beam S355MC FZV 3 4 5
Strut P235TR1 FZV 2 2 2
Protective mat Cell polyethylene RG 100 4 4 4
Fasteners 8.8 FZV or equivalent Incl. Incl. Incl.
Product options
42071: 500 × 500 × 50 mm/19.7 × 19.7 × 2 in, 28 kg/61.7 lb concrete block.
91124: Additional strut for yoke arms to be attached to Ø 76.1 mm/3 in tube.
91125: Clamp set for Ø 114.3 mm/4.5 in tube. 3 clamps with U-bolts included.
Tubes of various lengths, diameters and wall thicknesses can be ordered from MAFI.
Package data
Product Length (mm/in) Width (mm/in) Height (mm/in) Weight (kg/lb)
4600 1250/49.2 350/13.8 350/13.8 65/143.3
4601 1750/68.9 350/13.8 350/13.8 105/231.5
4602 2300/90.6 350/13.8 350/13.8 137/302
Tightening torque
Equipment pole
© 2019–2020 MAFI AB. All rights reserved.
*Article 4600/4601/4602
Ø 76.1 mmØ 3 in
View mountinginstructions.
Recommended maximum tilt: 4°.
4600: 2 rowsLenght: 1040 mm/40.9 inWidth: 100–505 mm/3.9–19.9 in
4601: 3 rowsLenght: 1540 mm/60.6 inWidth: 100–505 mm/3.9–19.9 in
4602: 4 rowsLenght: 2040 mm/80.3 inWidth: 100–505 mm/3.9–19.9 in
Ballast block capacity
Tilting
Rev 4
4600
46024601 EN 1090
Overturning moment table
Product Ballast on� guration (kg/lb)Overturningresistance MR (Nm)
4600 Max ballast 224 kg/493.8 lb 1410
4601 Max ballast 504 kg/1111.1 lb 4260
4602 Max ballast 896 kg/1975.3 lb 9790
© 2019–2020 MAFI AB. All rights reserved.
*Article 4600/4601/4602
Design resistance dataThe load limits given in this data sheet apply to the MAFI product only. The designer should always check thatthe supporting structure can safely carry the loads appliedto it by the MAFI product.
Overturning resistanceFor this family of freestanding structures the critical dimensioning parameter is the ability to resist overturning.The fi gures in the overturning moment table need to be higher than the moment applied by the design wind loads(i.e ultimate load including load factors) acting on the poleand the supported equipment.
The roof structure should be checked by an engineer to confi rm that it can withstand the total weight of the structure. Also it should be confi rmed that the friction between the product´s rubber mat and the roof is enough to prevent sliding.
*Article MAFI 4600/4601/4602
Product Lever arm (m/ft)Productweight (kg/lb)
Max overturning resistance (Nm)
4600 0.58/1.9 48.5/106.9 1410
4601 0.83/2.7 74.0/163.1 4260
4602 1.10/3.6 107.5/237 9790
Rev 4
For custom calculations regarding design resistancefor overturning, use the formula and the table below.The maximum allowed ballast and overturning resistanceis not to be exceeded.
MR = (Ballast weight + Product weight) × 9.81 × Lever arm
© 2019–2020 MAFI AB. All rights reserved. © 2019–2020 MAFI AB. All rights reserved.
98 99Rev 4*Article 4600/4601/4602Rev 4 *Article 4600/4601/4602
© 2019–2020 MAFI AB. All rights reserved.
Article 91110
Designed to provide mounting opportunity for an extra pole on the freestanding corner mounts 4601 and 4602.
FlexibilityKit for mounting an extra 76.1 mm/3 in tube to 4601 or 4602. The recommended length of the tube is max 1.5 m/4.9 ft.Easily mounted when assembling the freestanders corner mounts or added onto already built structures.
Detailed design dataDetailed design data for this productcan be found at www.mafi .se.
How to OrderTo order this kit, please contact MAFI quoting article number:
91110
Contact information can be found at www.mafi .se.
Design resistance dataOverturning ResistanceAll restistance data accoring to the platform, (4601or 4602), the extra pole kit is to be mounted on.
Content of kit
91110 mounted on 4601
91110 mounted on 4602
Rev 2
MAFI 91110ExtraPole Kit
Parts list
Part Material Quantity
Strut P235TR1 FZV 2
Frame corner with cone S355MC FZV 1
Fasteners 8.8 FZV or equivalent Incl.
Package data
Product Length (mm/in) Width (mm/in) Height (mm/in) Weight (kg/lb)
91110 2300/90.6 300/11.8 200/7.9 22/48.5
Product options
Tubes of various lengths, diameters and wall thicknesses can be ordered from MAFI.
Tightening torque
Equipment pole
© 2019–2020 MAFI AB. All rights reserved.
Article 91110
Ø 76.1 mmØ 3 in
View mounting instructions.
Rev 2
Mou
nted
on
4601
: 125
0 - 1
700
Mou
nted
on
4602
: 600
- 12
50
91110 EN 1090
© 2019–2020 MAFI AB. All rights reserved. © 2019–2020 MAFI AB. All rights reserved.
100 101Rev 2Article 91110Article 91110Rev 2
© 2019–2020 MAFI AB. All rights reserved.
*Article 8051/91100/91101
Lightweight platform designed to provide a level basefor up to 2 cabinets placed in areas of low risk.
FlexibilityThe elongated slots and slidable cross beams allow you to create the hole pattern you need for any cabinet.
The ball-jointed feet allow you to compensate for a maximum roof slope of 6°.
Outriggers can be specifi ed in following lengths:8051: 1100 mm/43.3 in91100: 1500 mm/59.1 in91101: 2000 mm/78.7 in
DesignWith all freestanders, it's absolutely essential to check for overturning, sliding and roof pressure. Contact MAFI if you need help with this.
How to OrderTo order kit, please contact MAFI quoting article number:
8051 9110091101
Contact information can be found at www.mafi .se.
Concrete blocks to be ordered separately
Rev 2
MAFI 8051
MAFI 91100
MAFI 91101
MAFI 8051*SmallAdjustableCabinet Platform
Parts list
Part MaterialQuantity8051
Quantity91100
Quantity91101
Steel beam, long S355MC FZV 2 2 2
Steel beam, short S355MC FZV 4 4 4
Ball-jointed foot Plastic and A2 4 4 4
Stub S355MC FZV 4 - -
Outrigger, 1500 mm/59.1 in S355MC FZV - 2 -
Outrigger, 2000 mm/78.7 in S355MC FZV - - 2
Protective mat - 4 4 4
Fasteners 8.8 FZV Incl. Incl. Incl.
Package data
Product Length (mm/in) Width (mm/in) Height (mm/in) Weight (kg/lb)
8051 1400/55.1 800/31.5 350/13.8 86/189.6
91100 1640/64.6 450/17.7 310/12.2 105/231.5
91101 2140/84.3 450/17.7 310/12.2 120/264.6
Product options
42071: 500 × 500 × 50 mm/19.7 × 19.7 × 2 in, 28 kg/61.7 lb concrete block.
Cabinet bolt dimension
Ground/Roof slope
© 2019–2020 MAFI AB. All rights reserved.
*Article 8051/91100/91101
Maximum M12
Maximum: 6°
Rev 2
MAFI 8051, 91100, 91101
Base platform
91100
911018051 EN 1090
© 2019–2020 MAFI AB. All rights reserved. © 2019–2020 MAFI AB. All rights reserved.
102 103Rev 2*Article 8051/91100/91101*Article 8051/91100/91101Rev 2
105
© 2019–2020 MAFI AB. All rights reserved.
4
© 2019–2020 MAFI AB. All rights reserved.
*Article 8051/91100/91101Rev 2
Maximum equipment weight per section (Fsection): 300 kg/ 661.4 lb.Maximum equipment weight total: 600 kg/1 322.8 lb
Fsection Fsection
Design resistance dataThe load limits given in this data sheet apply to the MAFI product only. The designer should always check thatthe supporting structure can safely carry the loads appliedto it by the MAFI product.
Overturning resistanceFor this family of freestanding platforms the critical dimensioning parameter is the ability to resist overturning.Wind forces, dimensions and weights of the cabinets must be taken into consideration when designing a platform solution.
A stability calculation should be done in every case– If you need help, please contact MAFI.
The roof structure should be checked by an engineer to confi rm that it can withstand the total weight of the structure. Also it should be confi rmed that the friction between the product´s rubber mat and the roof is enough to prevent sliding.
Fwind
Mresisting
Accessories
MAFI 32655 Cable Holder Family
Tubes, beams, threaded rods and U-bolts
MAFI 7000 Stainless Steel 10-hole Earthbar
Various Accessories
© 2019–2020 MAFI AB. All rights reserved.
104 Rev 2 *Article 8051/91100/91101
© 2019–2020 MAFI AB. All rights reserved.
*Article 32655/32657/32658/32660/32663/32664
Designed as an easily-fi tted tower-leg clampto accommodate a number of feeder cables.
FlexibilityThe different models in the family can accommodate tubular tower-legs ranging from Ø 20–192 mm/0.8–7.6 in, and angle legs from 60 × 60–130 × 130 mm/2.4 × 2.4–5.1 × 5.1 in.
Detailed design dataDetailed design data for this productcan be found at www.mafi .se.
How to OrderTo order this kit, please contact MAFI quoting article number:
32655 or E-order number (SEG): 606253332657 or E-order number (SEG): 600069532658 or E-order number (SEG): 600069632660 or E-order number (SEG): 606253432663 or E-order number (SEG): 600069732664 or E-order number (SEG): 6000698
Contact information can be found at www.mafi .se.
32655/57/58
32660/63
32664
Rev 3
MAFI 32655*Cable Holder Family
Parts list
Part MaterialQuantity
32655/57/58/60/63
Quantity
32664
Bracket S355MC FZV 1 1
Clamp S355MC FZV - 1
U-bolt M12 A4 or 8.8 FZV 1 -
Nut M12 8.8 FZV 4 8
Washer 8.8 FZV 2 4
Package data
Product Length (mm/in) Width (mm/in) Height (mm/in) Weight (kg/lb)
32655/-57/-58 400/15.7 100/3.9 50/2 1.2/2.6
32660/-63 550/21.7 100/3.9 70/2.8 2/4.4
32664 550/21.7 100/3.9 70/2.8 2.7/6
Product Parent member dim. (mm/in)
32655 Ø 20–50/0.8–2
32657 Ø 40–76/1.6–3
32658 Ø 89–114/3.5–4.5
32660 Ø 35–76/1.4–3
32663 Ø 89–114/–4.5
32664 Ø 76–192/3–7.6
60 × 60–130 × 130/2.4 × 2.4–5.1 × 5.1
Tightening torque
Parent pole/leg
© 2019–2020 MAFI AB. All rights reserved.
*Article 32655/32657/32658/32660/32663/32664
Threaded rods M12: 40 Nm
U-bolts M12: 30 Nm
Rev 3
32660/63/64 32664
32655/57/58
3266432660/-63
32655/-57/-58
© 2019–2020 MAFI AB. All rights reserved. © 2019–2020 MAFI AB. All rights reserved.
106 107Rev 3*Article 32655/32657/32658/32660/32663/32664Rev 3 *Article 32655/32657/32658/32660/32663/32664
Rev 3
© 2019–2020 MAFI AB. All rights reserved.
Article 7000
Designed to be used as an earthbar for towersand feeder runs.
FlexibilityThe earthbar can easily be fi tted to round members fromØ 42–76 mm/1.7–3 in or angle members up to 50 × 50 mm/2 × 2 in. It can also be readily attached to cable ladder,cable tray and C-channel members.
Detailed design dataDetailed design data for this productcan be found at www.mafi .se.
How to OrderTo order this kit, please contact MAFI quoting article number:
7000 or E-order number (SEG): 6062665
Contact information can be found at www.mafi .se.
MAFI 7000Stainless Steel 10-hole Earthbar
Parts list
Part Material Quantity
Plate A2 1
U-bolt A4 1
Bolt M8/M6 A2 12
Nut M8 A2 10
Washer M8/M6 A2 34
Package data
Product Length (mm/in) Width (mm/in) Height (mm/in) Weight (kg/lb)
7000 390/15.4 370/14.6 50/2 0.5/1.1
Rev 3
7000
Parent pole/leg
© 2019–2020 MAFI AB. All rights reserved.
Article 7000
Ø 42–76 mmØ 1.7–3 in
Rail anchor:Inner dimension up to 49 mm/1.9 in
Up to 50 x 50 mmUp to 2 x 2 in
© 2019–2020 MAFI AB. All rights reserved. © 2019–2020 MAFI AB. All rights reserved.
108 109Rev 3Article 7000Article 7000Rev 3
The MAFI range of tubes can be ordered in different standard lengths.The tables below contain information about material, dimension and weight.
Order by entering article number with the appendixindicating the length.
Ex: GT60329-20GT60329-20: Galvanized Tube.GT60329-20: Outer Ø: 60.3 mm/2.4 in and wall thickness: 2.9 mm/0.1 in. GT60329-20: Length: 2000 mm/78.7 in.
All measurements in mm/in and kg/lb if not stated otherwise.
© 2019–2020 MAFI AB. All rights reserved.
Tubes and BeamsRev 2
Tubes and Beams
Aluminium Tubes EN AW-6082T6 nature anodized 20μm
Article no.(Square pro� le)
Dimension (mm/in)Wall thickness(mm/in)
Weight(kg per m)
Article no. corresponding to available length(ex. 2000 mm length corresponds to -20)
AT605-XX 60.3/2.4 5.00/0.2 2.33 -10, -15, -17, -20, -25, -30, -60
AT755-XX 75/2.9 5.00/0.2 3.02 -20, -30, -60
Steel Tubes P235TR1 FZV
Article no.(Circular pro� le)
Outer Ø (mm/in)Wall thickness(mm/in)
Weight(kg per m)
Article no. corresponding to available length(ex. 2000 mm length corresponds to -20)
GT483325-XX 48.3/1.9 3.25/0.13 3.61 -033, -10, -30
GT60329-XX 60.3/2.4 2.90/0.11 4.11 -10, -15, -20, -25, -30, -60
GT76129-XX 76.1/3 2.90/0.11 5.24 -075, -10, -15, -20, -25, -30, -40, -60
GT76145-XX 76.1/3 4.50/0.18 7.96 -10, -15, -20, -30, -60
GT88932-XX 88.9/3.5 3.20/0.13 6.76 -10, -15, -20, -25, -30, -40, -60
GT101636-XX 101.6/4 3.60/0.14 8.70 -10, -20, -25, -30, -60
GT114336-XX 114.3/4.5 3.60/0.14 9.83 -075, -10, -15, -20, -25, -30, -40, -60
GT114350-XX 114.3/4.5 5.00/0.2 13.51 -10, -15, -20, -30, -40, -60
Steel Beams S355J2H FZV
Article no.(Square pro� le)
Dimension (mm/in)Wall thickness(mm/in)
Weight(kg per m)
Article no. corresponding to available length(ex. 2000 mm length corresponds to -20)
GB50503-XX 50 × 50/2 × 2 3.00/0.12 4.32 -07, -10, -12, -15, -20, -30, -60
GB50505-XX 50 × 50/2 × 2 5.00/0.2 6.85 -30, -60
GB60603-XX 60 × 60/2.4 × 2.4 3.00/0.12 5.26 -10, -15, -20, -25, -30, -60
U-boltsThe MAFI range of U-bolts are made of 8.8 FZV or A4 steel. They range in size and shape to fi t different member profi les. The U-bolt kits inthe table include nuts and washers.
© 2019–2020 MAFI AB. All rights reserved.
Threaded Rods and U-boltsRev 2
Threaded Rods andU-bolts
Type A Type CType B
Article no. Material Length (mm/in) Ø (metric)
9705 A4 1000/39.4 M8
33817 FZV 8.8 200/7.9 M10
33815 FZV 8.8 250/9.8 M10
9535 A4 1000/39.4 M10
29272 FZV 8.8 100/3.9 M12
23122 FZV 8.8 200/7.9 M12
23121 FZV 8.8 250/9.8 M12
23131 FZV 8.8 330/13 M12
29191 FZV 8.8 400/15.7 M12
23651 FZV 8.8 500/19.7 M12
9438 FZV 8.8 1000/39.4 M12
9562 A4 1000/39.4 M12
27851 FZV 8.8 330/13 M16
27853 FZV 8.8 400/15.7 M16
29291 FZV 8.8 500/19.7 M16
9282 FZV 8.8 1000/39.4 M16
9671 A4 1000/39.4 M16
9281 FZV 8.8 2000/78.7 M16
9532 FZV 8.8 1000/39.4 M20
9664 FZV 8.8 2000/78.7 M20
Article no. TypeC–C(mm/in)
Ø
(metric)
Thread length (mm/in)
E� ectivelength (mm/in)
3756-1 A 70/2.8 M8 45/1.8 50/2
3013-1 B 90/3.5 M8 95/3.7 107/4.2
2802-1 A 81/3.2 M10 85/3.3 95/3.7
3011-1 B 90/3.5 M10 70/2.8 77.1/3
33802-1 A 49/1.9 M12 60/2.4 112/4.4
3380-1 A 62/2.4 M12 55/2.2 75/2.9
33801-1 A 74/2.9 M12 60/2.4 125/4.9
2638-1 A 76.1/3 M12 75/2.9 88/3.5
33803-1 C 74/2.9 M12 60/2.4 154/6.1
2801-1 A 92/3.6 M12 91/3.6 97/3.8
33804-1 A 103/4.1 M12 110/4.3 150/5.9
2867-1 A 130/5.1 M12 102/4 108/4.3
2868-1 A 130/5.1 M12 118/4.6 170/6.7
3572-1 A 144/5.7 M12 100/3.9 120/4.7
2637-1 A 134/5.3 M16 60/2.4 111/4.4
4000-1 A 205/8.1 M16 165/6.5 187/7.4
Whole Threaded RodsThe MAFI range of whole threaded rods can be ordered in different standard materials, lengths and diameters.
© 2019–2020 MAFI AB. All rights reserved. © 2019–2020 MAFI AB. All rights reserved.
110 111Rev 2Rev 2 Threaded Rods and U-boltsTubes and Beams
© 2019–2020 MAFI AB. All rights reserved.
Article no.Tube dimension (mm/in)
Wall thickness(mm)
Height(mm/in)
Material
4397 Ø 114.3/4.5 - 53/2.1 FZV
43971 Ø 76.1/3 - 43/1.7 FZV
43972 Ø 88.9/3.5 - 53/2.1 FZV
95361 Ø 48.3/1.9 2.5 - Polyethylene
95362 Ø 76.1/3 2.9 - Polyethylene
95363 Ø 76.1/3 4.5 - Polyethylene
Article no.Cable ladderwidth (mm/in)
Plate dimension(mm/in)
Hole dimension(mm/in)
4406 200/7.9 1000 × 200/39.4 × 7.9 12/0.5
44061 300/11.8 1000 × 300/39.4 × 11.8 12/0.5
44062 400/15.7 1000 × 400/39.4 × 15.7 12/0.5
44063 500/19.7 1000 × 500/39.4 × 19.7 12/0.5
Article no. Tube dimension (mm/in) Length (mm/in) Bolts (metric)
439711 Ø 76.1/3 520/20.5 M6
439720 Ø 88.9/3.5 530/20.9 M6
43970 Ø 114.3/4.5 530/20.9 M6
Various Accessories
Top-hat Pole CoversDesigned as a waterproof cover for the top of a pole.
Cable Ladder Cover PlateDesigned to provide a protective cover to cable ladders or cable trays. Kit contains mounting material.
Lightning ProtectorDesigned to protect equipment poles from lightning current.
Rev 2
All measurements in mm/in and kg/lb if not stated otherwise.
How to orderTo order, please contact MAFI quoting article number according to tables.
Contact information can be found at www.mafi .se.
Various Accessories
© 2019–2020 MAFI AB. All rights reserved.
Various Accessories Rev 2
Rubber MatDesigned to prevent damage to roof fi nish.
Article no. Product � t Dimension (mm/in) Quantity
2831 42071 550 × 550 × 10/21.7 × 21.7 × 0.4 3
42102 4309/4310 1200 × 1200 × 10/47.2 × 47.2 × 0.4 1
42105 4248 Ø 140 × 4/5.5 × 0.16 1
42106 4328 129 × 188 × 4/5.1 × 7.4 × 0.16 1
Rubber InsertDesigned to prevent any cable deformation.Fits any 7/8" cable holder.
Article no. Outer diameter (mm/in) Inner diameter (mm/in) Length (mm/in)
2141 Ø 26/1 Ø 22/0.87 × 1 pc. 50/2
2142 Ø 26/1 Ø 9/0.35 × 2 pcs. 50/2
2143 Ø 26/1 Ø 7/0.28 × 3 pcs. 50/2
2141
2142
2143
Rubber Roof FlashingsDesigned to effectively seal any round inlets coming through sheet-metal roofs.
Article no. Base size (mm/in) For pipe diameter (mm/in)
53003G 205 × 205/8.1 × 8.1 Ø 60–125/2.4–4.9
53001G 245 × 245/9.6 × 9.6 Ø 80–160/3.1–6.3
Concrete PlateDesigned to act as ballast weight to increase performance of free standing products.
Article no. Base size (mm/in) Weight (kg/lb)
42071 500 × 500 × 50/19.7 × 19.7 × 2 28 kg/61.7
Steel band kitDesigned to use with steel band solution for fastening brackets to a utility pole.
Article no. Dimension (mm/in) Product � t Material
91133 243 × 30 × 1/9.6 × 1.2 × 0.04 5012, 5013 A4
91134 236 × 35 × 1/9.3 × 1.4 × 0.04 6024 A4
© 2019–2020 MAFI AB. All rights reserved. © 2019–2020 MAFI AB. All rights reserved.
112 113Rev 2Rev 2 Various AccessoriesVarious Accessories
EuropeElektroskandia Sweden AB Norrvikenleden 97 SE-191 83 Sollentuna, Sweden www.elektroskandia.seRegoort Network Infrastructure Griendwerkersstraat 11 3334 KB Zwijndrecht, The Netherlands www.regoort.nlGraphicshow Cable Accessories (GCA) LtdRonell Place 41A Shire Hill Industrial Estate Saffron Walden, Essex CB11 3AQ United Kingdom www.gcaltd.co.uk
North AmericaVallen North America2730 Edmonds Ln. Ste 100 Lewisville, TX 75067 USA www.vallen.com
Central AmericaVallen Proveedora IndustrialAv. Presidente Juarez no.2007-4 Tlalnepantla, Edo de Mex. Mexico C.P. 54070, Mexico www.vallen.com.mx
AfricaMafi East AfricaKatko Complex LR No. 149977, Unit 32. Mombasa Rd.Nairobi, Kenya www.mafi.com/eastafricaElectroWave Solutions Durban KwaZulu Natal South Africa www.electrowavesa.com
AsiaElektroskandia (Shanghai) Co.,Ltd.355 Qin Qiao Road, Jinqiao Export Processing Zone, 201206, Shanghai, P.R.Chinawww.elektroskandia.com.cnESK India Commerse & Trade Pvt Ltd229/239, Rectangle No. 51 Khasra No. 02, Vill.Kherki Daula Near Haldirams, Gurgaon-122004, India www.eskindia.in
Distributors114 115
© 2019–2020 MAFI AB. All rights reserved. © 2019–2020 MAFI AB. All rights reserved.
Table of content
Article no. Product name Page
1234 RRU Adaptor Plate 40
1236 PSU Adapter Plate 42
1237 RRU C-Rail Bracket 42
1241 Micro ERS Vertical 43
2230 Telescopic Strut Support 76
2231 Telescopic Strut Support 76
2232 Telescopic Strut Support 76
2233 Telescopic Strut Support 76
2234 Telescopic Strut Support 76
2235 Telescopic Strut Support 76
2414 Heavy Duty Wall Mount 67
3022 Adapter beams 79
3058 GPS Mount 49
3115 Antenna Offset 51
3116 Antenna Offset 51
3117 Antenna Offset Large 54
3263 One-Direction Offset Family 9
3265 One-Direction Offset Family 9
3268 Symmetric Offset Family 12
3270 Symmetric Offset Family 12
3272 One-Direction Offset Family 9
3273 One-Direction Offset Family 9
3274 Small Universal Pole Mount 21
3510 Rafter Bracket Kit 82
3541 Medium Duty Wall Mount 61
3544 Large Offset Wall Mount 64
3610 Raking Tower Leg Offset Family 15
3611 Vertical Tower Leg Offset Family 18
3612 Vertical Tower Leg Offset Family 18
3613 Raking Tower Leg Offset Family 15
3614 Vertical Tower Leg Offset Family 18
3615 Vertical Tower Leg Offset Family 18
4019-2 Double RRU Support 44
4019-3 Triple RRU Support 44
4019-4 Quattro RRU Support 44
4020 Single RRU Mount 44
4036 Single RRU Support 46
4037 Dual RRU Support 46
4112 Free Stander Light 88
Article no. Product name Page
4309 Free Stander Medium 91
4310 Free Stander Platform 94
4316 Single Pole 85
4415 3-Sector Antenna Mount 24
4418 3-Sector Antenna Mount 24
4600 Free standing Corner Mount 97
4601 Free standing Corner Mount 97
4602 Free standing Corner Mount 97
5012 Air Light Bracket 57
5013 Air Light Bracket 57
5022 Air Medium Bracket 58
5023 Air Medium Bracket 58
5030 Air Heavy Bracket 59
5031 Air Heavy Bracket 59
5110 Radio Support 37
5310 Joint Plate Kit 27
5311 Joint Plate Kit 27
5312 Joint Plate Kit 27
5320 Crossover Kit 30
5321 Crossover Kit 30
6024 Dual ERS Bracket 39
6029 Multi ERS Bracket XL 39
7000 Stainless Steel 10-hole Earthbar 108
8051 Small Adjustable Cabinet Platform 102
8057 Wall Mounted Cabinet Platform 73
31154 Antenna Offset 51
32655 Cable Holder Family 106
32657 Cable Holder Family 106
32658 Cable Holder Family 106
32660 Cable Holder Family 106
32663 Cable Holder Family 106
32664 Cable Holder Family 106
41121 Free Stander Light 88
43091 Free Stander Medium 91
43092 Free Stander Medium 91
43246 Combiclamp Family 33
43247 Combiclamp Family 33
43248 Combiclamp Family 33
43249 Combiclamp Family 33
43692 Corner Wall Mount 70
91100 Small Adjustable Cabinet Platform 102
91101 Small Adjustable Cabinet Platform 102
91110 Extra Pole Kit 100
Threaded rods and U-bolts 111
Tubes and Beams 110
Various accessories 112
Table of ContentDistributors
MAFI AB
Seljavägen 15/Box 275 SE-792 24 Mora, Sweden
Tel: +46 (0)250-381 60
Overall e-mail adress: [email protected] Order e-mail adress: [email protected] Personell: [email protected]
www.mafi.se