Product Catalogue · Specalist Access & Rescue Products Ltd was founded in 2003 by Dave & Dorene...

Specialist Access & RescueProducts Ltd.

Product Catalogue2018/19

Catalogue 2018/19

Harnesses

Kits

Slings

Shock Absorbing Lanyards

Adjustable Lanyards

Work Positioning Lanyards

Karabiners

Ascenders & Descenders

Back-up Devices

Pulleys & Pulley Systems

Bags

Rope

Stretchers

Quadpod & Winch

Accessories & Bespoke Services

4 - 17

18 - 21

22 - 27

28 - 31

32 - 33

34 - 35

36 - 41

42 - 47

48 - 49

50 - 53

54 - 57

58 - 61

62 - 67

68 - 71

72 - 77

Specalist Access & Rescue Products Ltd was founded in 2003 by Dave & Dorene Allport, after Troll Safety Equipment closed their factory and moved production overseas.

Dave had worked for over 22 years as a Technical Specialist for rescue & rope access, designing equipment and techniques used in these areas. He founded the Troll Training School and trained Fire & Rescue Services, Police, and Military Forces around the world in rescue & rope techniques.

At SAR, we pride ourselves on manufacturing products that offer superior performance, reliability, user benefits and at the same time are cost effective.

Our market knowledge and experience is what sets us apart. Our customer focused attitude ensures that we continue to offer products that are backed up with exemplary customer support.

Our policy is to manufacture high quality products to meet the increased demand for safety in both the national and international markets. We are committed to customer service and quality management, having been certified with the BS EN ISO 9001:2015 standard.

Our highly skilled manufacturing department is where our innovative products are transformed from raw material to finished goods, within the 15,000 sq ft facility in Greater Manchester, England. All our products are manufactured from certified quality raw materials. The finished products are subject to sample destruction testing or proof loading tests in accordance with current manufacturing standards.

It is vital that every piece of safety equipment we make has been thoroughly tested and inspected by highly competent people, reassuring the user that each and every component meets the highest standards. These standards for quality are in place during all stages of production, from yarn input to shipping of the product.

All of SAR’s products are manufactured to the appropriate European standards required for it’s equipment type.

SAR Products Ltd now produces equipment that is shipped worldwide to our worldwide distributors

CONTENTSSAR PRODUCTS

2 3

Catalogue 2018/19

HARNESSES

HA

RNESSES

The Merlin full body harness has been designed for industrial rope access and technical rescue, where personnel wish to have either a wrap around or step in fit, with a pull over the head style. The wrap around fit has been constructed into all the SAR multi purpose harness range. This innovative pattern includes two independent front waist attachment points in different profiles. This is so the rope access and rescue technicians can utilise any type of rope descender without twisting the system.

The Merlin is also fitted with upper ‘D’ connection points at the front and rear for safety back-up and fall arrest attachment. The laminated foam and shaped shoulder pads give additional comfort to the user.

The Merlin harness comes in two different forms, the standard and Merlin Tech which has the addition of a fixed chest ascender. This gives an advantage to those who employ ‘frogging’ techniques for ascending.

MERLINFULL BODY HARNESS Conforms to:

EN361:2002, EN358:1999 & EN813:2008

Merlin 6 Full Body Harness Merlin 6 Tech Full Body Harness

Colour Choices:

Product code(s): Merlin Full Body HarnessMerlin 6: H0075 Merlin 6 QC: H0075QCMerlin 5: H0074 Merlin 5 QC: H0074QCMerlin 4: H0073 Merlin 4 QC: H0073QCMerlin 3: H0072 Merlin 3 QC: H0072QC

Product code(s): Merlin Tech Full Body HarnessMerlin 6 Tech: H0075T Merlin 6 Tech QC: H0075TQCMerlin 5 Tech: H0074T Merlin 5 Tech QC: H0074TQCMerlin 4 Tech: H0073T Merlin 4 Tech QC: H0073TQCMerlin 3 Tech: H0072T Merlin 3 Tech QC: H0072TQC

• Front fixed Karabiner (standard Merlin Harness only)• Front fixed Chest Croll (Merlin Tech Only)• Triple front attachments (Merlin 4 & 6 only)• Two side attachments. Fold back when not required. (Merlin 5 & 6 only)• One rear dorsal attachment. Fold away when not required• Belay loop 30kN and Dee connections 25kN• Fully adjustable waist and legs• Step in fitting or wrap around fitting• Twin adjustment on the waist• Quick clip buckles on leg loops fitted on the QC styles• Laminated sandwiched closed cell foam padding• Shaped waist and legs for extra comfort• Polyester webbing• Three reinforced catch free gear rack loops• Four equipment rings• Slotted waist for fitting pouches, bolt bags or tool frogs• Waist circumference: Min 74cm - Max 114cm

Specifications:

4 5

Catalogue 2018/19

The Kestrel fall arrest harness has been upgraded and now comes in two styles with four colour choices. The harness has a front and rear attachment point for fall arrest connection. We recommend the front be used for fall arrest. The side ‘D’s on the Kestrel 4 can be folded back when not in use, therefore reducing risk of inadvertent snarling.

Quick clip buckles can be fitted on the leg straps and fixed padding can also be fitted to any of the Kestrel range when ordered. The padding is made of sandwich laminated foam to give added comfort when donning, this also makes the harness easier to fit as the padding takes any twists from the webbing.

Fitting is normally wrap around but can be left fastened at the chest/sternum connection to give a quicker fitting. Shoulder adjustment buckles use two square link buckles and once adjusted to fit the user will not slip during everyday use.

Colour Choices: Colour Choices:

RAPTORFULL BODY HARNESS

KESTRELFALL ARREST HARNESS

The Raptor 4 & 6 full body harness has been specifically designed for rope access and technical rescue personnel who prefer a multi purpose full body without a restrictive chest strap. This approach comes from years of experience being suspended in harnesses and a different approach and attitude in the evolution of harness design. Modifications to the initial concept have been made over the years thanks to the constructive input from our world wide users.

The Raptor, like the Merlin has the innovative pattern that includes two independent front waist attachments points in different profiles, this is so rope access and rescue technicians can utilise any type of rope descender without twisting the system.

The Raptor 6 has two side ‘D’ connections that fold back flat when not required for use. The harness also has sandwich closed cell foam formed and shaped pads for waist and legs giving superb comfort.

• Belay loop 30kN and Dee’s 25kN• Triple front attachments• One rear attachment• Two side attachments (Raptor 6 only)• Fully adjustable waist and legs• Wrap around or step in fitting• Well-established and easy interlocking buckle system• Twin adjustment on the waist• Laminated sandwiched closed cell foam padding • Shaped waist and legs for extra comfort• High quality polyester webbing• Four reinforced catch free gear rack loops• Waist circumference: Min 74cm - Max 114cm• Leg/Thigh circumference: Min 42cm - Max 70cm• Weight: Raptor 4 - 1.50kg• Weight: Raptor 6 - 1.75kg

Product code(s): Raptor 4: H0030Raptor 6: H0031

Product code(s): Kestrel 2 REF: H0040 Kestrel 2 QC REF: H0042STDQCKestrel 4 REF: H0043 Kestrel 4 QC REF: H0043STDQC

Conforms to: EN361:2002, EN358:1999 & EN813:2008

Conforms to: EN361:2002 & *EN358:1999

Raptor 4 Full Body Harness

Raptor 4 Full Body Harness Raptor 6 Full Body Harness

Kestrel 2 Fall Arrest HarnessRaptor 6 Full Body Harness Kestrel 4 Fall Arrest Harness

HA

RNESSES

Specifications: Kestrel 2:• Conforms to: EN361:2002• Connections: One Sternal, One Dorsal• Weight: 960g• Standard size fits: S, M & L - we can make XS & XL to order

Kestrel 4:• Conform to: EN361:2002 & EN358:1999 • Connections: One Sternal, One Dorsal and Two side• Weight: 1.1kg• Standard size fits: S, M & L - we can make XS & XL to order

*Only the Kestrel 4 conforms to EN358:1999

Specifications: The leg connection is the standard square link and twin slot buckling system with a heavy duty elastic tidy for any excess webbing to be captivated and the alternative QC fitting also has an elastic tidy.

All Kestrel harnesses have the option to have fixed padding added to the harness to improve the comfort for the user. The padding is made of sandwich laminated foam to give added comfort when donning, this also makes the harness easier to fit as the padding takes any twists from the webbing.

The padding can not be removed from the harness & should be requested when placing the order.

6 7

Catalogue 2018/19

Colour Choices:

LINEMANFULL BODY HARNESS

The Lineman harness has been designed for use by utility companies and made to be easily fitted, just like putting on a jacket.

Fitted with a full set of quick clip cobra buckles, the Lineman harness can be easily fitted and removed. The front attachment point combines a quick clip cobra buckle with the D attachment point.

The harness incorporates 5 attachment points. 2 front and back attachment points, designed for fall arrest, 2 for work positioning, positioned on the side of the waist belt, these can be folded back when not in use. The final attachment point is used for abseiling and belaying.

The Lineman features 1 small and 2 large gear loops, in addition to 3 equipment rings. The back, waist and leg pads are made using high grade closed cell foam to give the maximum comfort when in use.

• Quick clip buckles throughout fully adjustable legs waist shoulder and back straps• Fold away side D’s• Simple clear access label• Polyester webbing• 2 large and 1 small gear loop with 3 equipment rings• Front chest Cobra D attachment point and Lower front connection point• Flat back attachment point• Reflective labels• Rated to 150Kg• Small Medium Size:

• Waist: 86cm - 137cm• Legs: 47cm - 61cm• Weight: 1.85Kg

• Large Size: • Waist: 95cm - 147cm• Legs: 47cm - 71cm• Weight: 2kg

Product code(s): Lineman Harness (Small/Medium) : H0076L

Lineman Harness (large) : H0076L

Conforms to: EN361:2002, EN358:1999 & EN813:2008

Specifications:

The Worker harness has been designed as a fall arrest harness and also a work positioning harness. The wrap around design and shoulder padding give this harness a comfortable fit as well as a speedy fit due to the use of the cobra buckles. The shoulder pads are also fitted with lanyard parking loops to store away lanyards in a easy to reach location when not in use.

The revolutionary design of the front attachment point utilises the cobra buckle with a built in D.

Colour Choices:

WORKERFALL ARREST HARNESS

Product code(s): Worker Full Body Harness: H0077

Conforms to: EN361:2002 & EN358:1999

HA

RNESSES

• Quick clip buckles throughout• Close cell foam padding• Fully adjustable legs and shoulder straps• Fold away side D’s• Simple clear access label• High grade polyester webbing• 2 lanyard parking loops• Flat back attachment point• Front chest Cobra D attachment point• Reflective labels• Rated to: 150Kg• Weight: 1.3Kg

Specifications:

NewProduct!

NewProduct!

8 9

Catalogue 2018/19

The Harrier sit harnesses have been re designed and upgraded and are rated for use up to 150Kg. They are designed for rope access and technical rescue service personnel who prefer a separate sit and chest harness format to that of a multi purpose full body harness.

The Harrier, like the Merlin and Raptor has the innovative pattern that includes two independent front waist attachment points in different profiles so that rope access and rescue technicians can utilise any type of rope descender without twisting the system.

The Harrier has a wrap around fitting system for ease of donning and safety which stops the harness getting soiled, as is common with the step in type harness. The QC style has quick clip buckles on the leg loops and can also be made with QC buckles on the waist if so required.

The Hawk sit harness has been created for military and mountain rescue personnel and those who require the security and durability of a very robust harness as an alternative to that of a rock climbing harness.

Quality materials, design, construction and simplicity in fitting make this the supreme personal issue sit harness.

The emphasis in design was placed upon strength, stability, light weight and comfort. The Hawk delivers in all these fields and is perfect for anyone who needs to ‘hang around’. The wrap around fitting is also ideal when wearing crampons etc., but if preferred you may keep the buckles fastened to give step in fitting.

HA

RNESSES

Harrier 4 Sit Harness with Harrier Chest Harness

HAWKSIT HARNESS

HARRIERSIT HARNESS

Colour Choices:Product code(s):

Hawk: H0003 Hawk Black: H0004

NSN: 4240-99-361-7438

• Front attachment• Double thickness 18mm belay loop 30kN• Fully adjustable waist and legs• Wrap around or step in fitting• Well-established and easy interlocking buckle system• Laminated formed, closed cell foam padding• Shaped waist and legs for extra comfort• High quality polyester webbing• Four reinforced gear rack loops• Waist circumference: Min 74cm - Max 120cm• Leg/Thigh circumference: Min 42cm - Max 70cm• Weight: 814g• Rated to 150kg

*EN361 - When linked with any SAR chest harness and Link Sling.

Specifications:

Conforms to: EN813:2008, EN12277-C:2015 & *EN36:2002

Conforms to: EN813:2008, *EN358:1999 & **EN361:2002

• Twin independent front attachment points - Belay loop 30kN and Dee 25kN• Two side attachments (Harrier 4 models only)• Fully adjustable waist and legs with twin adjustment on the waist • Wrap around or step in fitting• Well-established and easy interlocking buckle system on waist• Laminated foam padding with shaped waist and legs for extra comfort• High quality polyester webbing• Four reinforced gear rack loops & four plastic gear loops• Waist circumference: Min 74cm – Max 114cm.• Leg/Thigh circumference: Min 42cm – Max 70cm.• Weight: Harrier 2 - 1.1Kg• Weight: Harrier 4 - 1.3Kg• Rated to 150kg

*EN358 - Harrier 4 only**EN361 - When linked with any SAR chest harness and Link Sling.

Specifications:


Harrier 2: H0001 Harrier 2 QC: H0001QCHarrier 4: H0002 Harrier 4 QC: H0002QC

The Harrier has also been designed to be used with any of the SAR chest harness range as well as it’s own Harrier chest harness models.

NewDesign!

10 11

Catalogue 2018/19H

ARN

ESSES

The Kite chest harness in combination with a threaded link sling have been designed to be used with any of the SAR sit harness range for added comfort and protection. The Kite can be utilised for climbing, mountaineering, rescue, intervention and technical access.

The harness has front loops for use with a link sling to keep the user in an upright sit position when connected to the sit harness to give a full body harness format conforming to EN361.

The Kite can be used for connecting a chest ascender by using the 25mm front strap threaded through the top hole of the ascender and the bottom of the ascender connected to the sit. The chest ascender can be fitted over the link sling and a karabiner in the chest loops giving the ability to be used in an instant.

The link sling can be fitted and kept in position and is easily removable to swap it out, the link sling keeps the user in an upright sit position when connected to the sit harness to give a full body harness format conforming to EN361.

The Kite & Kite QC chest harness must NOT be used on its own.

The Merlin sit harness is purposely designed for climbing walls, outdoor centres and youth groups. Based on the Hawk without the padding, it’s a ‘step in’ style sit harness with the buckles permanently interlocked so they cannot be removed or incorrectly fastened by untrained users. It also has different coloured leg loops and waist belt for ease of fitting and checking by supervisors or instructors.

When used in conjunction with the Merlin chest harness and link sling can be made into a full body harness format for more upright positioning.

The Merlin sit harness is tested to the more robust industrial standard for sit harnesses rather than the climbing standard for greater peace of mind. It is made from the same special polyester webs as our other harnesses for extra strength, abrasion resistance and UV resistance.

The Merlin chest harness and link sling have been designed to be used with any of the SAR sit harnesses for added comfort and protection to form a full body harness format. The Merlin chest harness and link sling have been designed to be used for climbing and mountaineering.

The front loops can be used with a link sling or karabiner threaded through and then connected to the sit harness to keep the user in an upright sit position when connected.

MERLINSIT HARNESS

MERLINCHEST HARNESS

KITECHEST HARNESS

Product code(s): Merlin Sit Harness: H0070

Product code(s): Merlin Chest Harness: H0071

• Front attachment• Double thickness 18mm belay loop 30kN• Fully adjustable waist and legs• Wrap around or step in fitting• Well-established and easy interlocking buckle system• Laminated formed, closed cell foam padding• Shaped waist and legs for extra comfort• High quality polyester webbing• Four reinforced gear rack loops• Waist circumference: Min 74cm - Max 120cm• Leg/Thigh circumference: Min 42cm - Max 70cm• Weight: 814g


Specifications:

Conforms to: EN813:2008 & *EN361:2002

Conforms to: *EN361:2002

Conforms to: *EN361:2002

• Fully adjustable chest• Wrap around cross fitting• Interlocking fixed shoulder buckle system• High quality polyester webbing• Weight: Chest 318g, Link Sling 50g• The Merlin chest conforms to EN361 only when used with a SAR Sit Harness

and the Link sling• Link sling conforms to EN365, EN566 & EN795


Specifications:

Colour Choices:Product code(s): Kite: H0010

NSN: 4240-99-229-5357Kite QC: H0010QC

• Fully adjustable chest• Wrap around cross fitting• Interlocking shoulder buckle system• High quality polyester webbing• Supplied with link sling• Quick Clip buckle front harness connection - Kite QC only• Weight:

• Kite - 350g • Kite QC - 445g

• Link sling conforms to EN365, EN566 & EN795


Specifications:

12 13

Catalogue 2018/19

The Harrier Chest harness and Harrier Chest plus harness are a new design to accompany the new Harrier sit harness range. The Harrier chest harnesses are made of high grade polyester webbing and the shoulders are padded with high grade closed cell foam.

The Harrier chest harness utilises a triple action karabiner on the front to attach to the Harrier sit harness and the Harrier chest plus has a sewn in chest ascender and connects to the front of the Harrier sit harness with a maillon. Both chest harnesses can be threaded into the back of the Harrier sit harness models meaning they can be permanently attached or replaced if damaged in anyway.

Both models of Harrier chest harness have a quick clip buckle on the shoulder to allow faster donning or removal.

HARRIERCHEST HARNESS Conforms to:

*EN361:2002 & *EN12277-D


Harrier Chest Harness: H0078Harrier Chest Plus Harness: H0078PL

• High grade polyester webbing throughout.• Close cell foam shoulder and back pad.• Front D fall arrest point only.• Weight:

• Harrier chest: 650g• Harrier chest plus: 800g

*EN361 & EN12277-D - When linked with any the Harrier Sit harness range

Specifications:

Harrier Chest Harness Harrier Chest Plus Harness

The Osprey chest harness is an improvement in design and materials of classic chest harness models produced in the past. The chest harness has fitted adjustable shoulder & chest straps for improved fit and comfort for the user. It can also be fitted with a front attachment quick clip buckle for easy donning and removal.

The chest harness has front loops for use with a link sling to keep the user in an upright sit position when connected to the sit harness to give a full body harness format conforming to EN361. The link sling can be fitted and kept in position when used with the Osprey QC

The Osprey can be used for connecting a chest ascender by using the 25mm front strap threaded through the top hole of the ascender and the bottom of the ascender connected to the sit. The chest ascender can be fitted over the link sling and a karabiner in the chest loops giving the ability to be used in an instant. The harnesses and link sling have been designed to be used for climbing, mountaineering, rescue, intervention and technical access.

HA

RNESSES

OSPREYCHEST HARNESS Conforms to:

*EN361:2002 & *EN12277-D


Osprey: H0016Osprey Black: H0016B - NSN: 4240-99-273-0406

Osprey QC: H0016QCOsprey QC with padding: H0016FP

• Fully adjustable chest• Wrap around cross fitting• Interlocking shoulder buckle system• High quality polyester webbing• Supplied with link sling• Rated to 150kg• Quick Clip buckle front harness connection - Osprey QC only• Weight:

• Osprey - 445g • Osprey QC - 505g

• Link sling conforms to EN365, EN566 & EN795

*EN361 - When linked with any SAR sit harness and Link Sling.

Specifications: The Osprey QC has the option to be fitted with non-removable padding, comes with a detachable gear rack for hanging tools or light equipment, lanyard parking loops, and velcro tabs for securing lanyard legs.

NewProduct!

14 15

Catalogue 2018/19H

ARN

ESSES

Our Dog Harness is now a well tested and proven design with updated materials which is very popular with search and rescue dog handlers. The harness comes in two sections for ease of fitting and flexibility of use for the dog with both sections being fully adjustable. The front/body harness has a padded chest for comfort and agility, with separate detachable leg loops for additional security.

The harness can be winched from the main lifting/lowering point with or without the leg loops dependent upon size, shape and weight of dog.

The Rescue Strop has the design of a split chest enabling the strop to be threaded around and under the casualty’s arms to reduce the chance of disturbing the surrounding ground.

The adjustment loops on the chest give it a large range of sizes from very young children to adults. The adjustment on the legs allows the wearer to be in a range of positions from vertical to sitting. The Rescue Strop is ideal for lifting into a sit position a person who is hanging in a fall arrest harness thereby stopping the possibility of suspension trauma. Also used for lifting people from water in a horizontal position and therefore reducing the possibility of shock.

The Bungee Ankle harness is a proven and tested pattern. The harness has been re-modelled and enhanced by utilising modern materials.

As there is no European standard for this type of restraint harness, we have fully tested it to a static load which is higher than the 15kN that is required for other products. However, as this is a restraint/positioning harness only, we advise that it is backed up to a harness that is fully compliant to the standards within the country being used. (e.g. EN361).

RESCUESTROP

DOGHARNESS

BUNGEE ANKLEHARNESSConforms to:

EN1497:2007

Chest:• 9mm closed cell laminated foam padding and 44mm polyester webbing• Three adjustment loops• Back pull handle for helicopter loading• Anodised alloy twist lock karabiner for rapid connection on the waist

Legs:• 44mm polyester webbing split leg loops• Two anodized alloy twist lock karabiners for rapid connection around legs

to central ring• Easy buckle adjustment from vertical to sit position and visa versa• Main lift connection: Large delta maillon• Weight: 1.35kg

Specifications:

Colour Choices:Product code(s): Rescue Strop: H0050

Product code(s): Dog Harness: H0015P

Product code(s): Bungee Ankle Harness: RS004

Colour Choices:

• Chest pad (removable). 6mm laminated closed cell foam• High grade 25mm and 45mm polyester webbing• Elastic retaining loops for stick light or torch• Fully adjustable for Sm, Med & Lrg size dogs• Weight: Chest section 300g

Specifications: • High quality polyester webbing• Close cell laminated foam ankle pads• SAR-ABS buckle system• Large range of adjustment• Magnetic webbing tidies• Static strength: 25kN• Weight: 390g

Specifications:

Colour Choices:

16 17

Catalogue 2018/19

KITS

KITS

This High Access Rescue kit uses our A-B auto-brake descender in the system. The system is pre-threaded within a rope bag as required by EN341.

This system can be used as an escape/self rescue procedure, to rescue an injured person in a two man load, or as a pick-off system, lifting a fallen casualty from their lanyard, rope or sling etc.

This kit can come with 25m or 50m of rope.

We advise that the user be trained in use of this equipment.

This kit includes:

• Small rescue rope bag• 11mm Low Stretch Rope - 25m or 50m• 1 x A-B Descender• 3 x Steel karabiners• 1 x 20cm Twin eye sling• 1 x 240cm 25mm round superweb sling• 2 x Heavy duty rope/sling protectors.• Safety knife and pouch

You can also add the equipment below to the kit to transfer it into a pick off rescue kit:

• 1 x 120cm round sling• 2 x Oval Karabiners• 2 x Std Pulley• 1 x Extension pole• 1 x Rocker

HIGH ACCESSRESCUE KIT

• Weight for 50m system approx. 5.7kg• All individual items conform to there own relevant EN standard• Please see individual products for their specifications

Specifications:

Product code(s): 25 Meter Kit: RS020A50 Meter Kit: RS025A

Additional Pick-Off Equipment: RS029

18 19

Catalogue 2018/19KITS

This kit includes:

• Merlin 6 Full Body Harness• Twin Clip Loop Lanyard• Industrial Helmet• RAD Rope Lanyard• Equipment Bag

Although these are the basic elements required for a riggers kit, we do understand these kits are very individual. Therefore, should you wish to purchase further items from our catalogue to compliment your kit or change any element, please advise and we will assist you in your selection.

The Rooftop Access Kit was developed to take advantage of using either a single or twin rope safety system. It can be used as a vertical safety fall arrest system on ladders, towers, tree’s etc. It can also be used as a work restraint or fall arrest system in rooftop areas where a single rope can be used to access an open edge, or a twin rope system to prevent pendulum movement.

There are no knots for the user to tie as this has been taken care of by either clipping the rope karabiner directly on to an anchor (EN795) or looping around a structure or girder then clipping back into the rope loop on the slider.

This kit includes:

• Kestrel 2 Harness• Twin Clip Loop Lanyard• Industrial Helmet• Equipment Bag

Although these are the basic elements required for the work at height kit, we do understand these kits are very individual.

Therefore, should you wish to purchase further items from our catalogue to compliment your kit or change any element, please advise and we will assist you in your selection.

• Each kit contains all the items shown in the picture with a 50m rope.• As a work restraint/positioning system it will conform to EN358 and as a

vertical back-up system EN353-2. Each individual item in the kit conforms to the correct EN standards and are compatible for this use. If a harness is not required because the client already has one this can be taken out as the kit can be used with any of the SAR full body harnesses or sit harness with the chest harness linked.

Specifications:

Product code(s): 25 Meter Kit: RS02250 Meter Kit: RS021

• Kits can be adapted at the users request.• Please see individual products for specifications.

Specifications: • Kits can be adapted at the users request.• Please see individual products for specifications.

Specifications:

Product code(s): Riggers Kit: RS033

Product code(s): Work At Height Kit: RS034

ROOFTOPACCESS KIT

WORK AT HEIGHTRIGGERS KIT

WORK AT HEIGHT KIT

The kit includes:

• Equipment Holdall 35L • Kestrel 2 Harness• 4 x Gator Karabiners• 4 x Oval Karabiners• 4 x Rope Protectors• 2 x Rockers• 2 x 10cm Twin Eye Slings • 11mm Low Stretch Rope - To required length

Training is highly recommended for this system so that the user understands its many uses.

20 21

Catalogue 2018/19

Our Twin Eye slings are made with a 18mm polyester superweb, and are rated to 24kN when new. This conforms to the highest standards set by EN354 of 22kN.

Example sizes: 10cm & 20cm Twin Eyed slings. These can be used with the Rocker or as a short extension for many things such as a cow’s tails used in rope access.

30cm & 60cm Twin Eyed slings. They can be used as a safety back-up link for yourself or a casualty in rescue, main ascender link sling in ascending and many other uses for the experienced technician.

SLINGS

SLING

S

TWIN EYESLINGS

ROCKER SLINGASSEMBLY

Our Twin Eye slings have a test strength of 24kN when new. This conforms to the highest standards set by EN354 of 22kN. The Gator karabiners are made from high grade alloy, formed from round bar then pressed to shape to give extra strength.

They have a key lock on the nose and gate to stop web catching.

• Rated load 24kN• Made from high grade polyester webbing• Individual serial number• Length size variations available on request• Twin eyes available to be made with 25mm webbing, increasing the rated

load to 35kN

Specifications:

Conforms to: EN354:2010, EN566:2006 & EN795-B:1997


• Working length including karabiners 25cm• Rated load 24kN• High grade polyester webbing• Individual serial number• Karabiner conforms to: EN362• Weight: 128g• Size variations available on request

Specifications:

Product code(s): 10cm: S0001 20cm: S000330cm: S0005 60cm: S0007

Colour Choices:

Product code(s): Rocker Sling Assembly: S0014

Colour Choices:

22 23

Catalogue 2018/19

Our Link Sling is made from high grade polyester with a weave that keeps the locking stitch away from the edge to help reduce wear/abrasion. It is made in two different lengths which are colour coded, 15cm for children and 20cm for adults. Longer slings can be made if required, along with all black versions.

It is the main link between any of our chest and sit harnesses to form a full body harness, compliant with EN361 (Personal protective equipment against falls from height - full body harnesses).

LINKSLING

• Rated load 24kN• High grade polyester webbing• Individual serial number• Colour coded between sizes• Standard length: 20cm• Child length:15cm• Weight: 38g• Size variations available on request.

Specifications:


Product code(s): 15cm: H0021 20cm: H0020

NSN: 4240-99-213-8765

The Personal Positioning Sling (PPS) was designed for rescue technicians as a means of adjusting their height to that of the casualty they are rescuing. It complies to the same standards as our other slings and if required can be used in their place.

The rescuers PPS has been produced the same way as the Twin Eye sling, with a 18mm polyester superweb, and a test strength of 24kN when new, which confirms to the highest standards set by EN354 of 22kN. The PPS also has an addition of a full wrap of protection on the top and an extension tail of 1m to help with adjustment.

PERSONALPOSITIONING SLINGConforms to: EN354:2010, EN566:2006 & EN795-B:1997

• Rated load 24kN• High grade polyester webbing• Individual serial number• Size variations available on request.

Specifications:

Product code(s): 45cm: S0009

Colour Choices:

These Circular Slings are made using a 18mm polyester superweb and have a tensile strength of 24kN which is far above the required standard.

Standard sizes for the 18mm sling include 20cm, 30cm, 60cm, 150cm, 240cm, & 490cm. However the slings can be made to any required length requested by the client.

This type of sling is possibly the most used sling around the world. It has many uses for the experienced rope technician such as: anchors/belay’s, self equalizing belay, foot loops for traversing, high steppers.

Please Note: working length is half the advertised sling length.

These Circular Slings are made using a 25mm polyester superweb and have a tensile strength of 35kN which is far above the required standard.

Standard sizes for the 25mm sling include 120cm & 240cm, but can be made to any required length.

The most popular size for the circular sling is 240cm, this is because it has many uses for the experienced rope access or rescue technician in a variety of environments such as; anchors/belay’s, self equalizing belay, foot loops for traversing and as high steppers.

Please Note: Working length is half the advertised sling length.

SLING

S

CIRCULARSLINGS - 18mm

CIRCULARSLINGS - 25mm




Specifications:

Product code(s): 20cm: S0053 30cm: S0016

60cm: S0025 100cm: S0033 240cm: S0035 490cm: S0036

Product code(s): 120cm: S0011240cm: S0012480cm: S0013



Specifications:

24 25

Catalogue 2018/19

The Tri-Sling was developed after a request for a product that would comply with EN354, the industrial standard for lanyards and not just the lower standards EN566 for sports climbing and EN795-B industrial anchor. It carries all three standards so that any client who has a certain standard written into their files for use has a choice.

It was developed for multi use in outdoor centres. It can be connected to the user by any connecter conforming to EN362 or EN12275-Q or it can be choke hitched via the protection covered loop. It can be used to clip back into its ring forming a loop in one leg of the lanyard.

The sling is made with 18mm polyester webbing and a polished alloy ring.

We have upgraded our Wire Anchor Strop, it now conforms to an additional standard and can be made from two different materials.

Galvanised steel wire:It has a breaking load of 27kN and a safe working load of 270kg.

Stainless steel wire: This wire has a slightly lower breaking load of 25kN, with a safe working load of 250kg.

The strop can be supplied without the protective sleeve and without the thimble eye. The can be made to any length you require.

SLING

S

Product code(s): 120cm: S0055 240cm: S0056

WIRE ANCHORSTROP

TRISLING

Conforms to: EN354:2010, EN795-B:1997 & PD CEN/TS 16415-B:20013


• Material: 6mm galvanised or stainless steel wire• Manufactured to any size you require• Sling strength: 27kN/25kN• Option of thimble eye• Option of protective sleeve

Specifications:

Product code(s): N/A

Product code(s): Tri Sling: S0058

• Colours: Blue and Black (other colours available on order)• Material: Polyester webbing, polished alloy ring• Individual serial number• Size: Blue legs 63cm Black leg 28cm• Overall length 84cm• Weight: 204g• Sling strength: 24kN• Ring strength: 25kN• Conforms to: EN354, EN566 & EN795-B• Size variations available on request.

Specifications:

ANCHORSTROP

CIRCULARROPE SLING


Conforms to: EN566:2006 & EN795-B:1997

Product code(s): 50cm Strop: L0013 1m Strop: L0012 1.5m Strop: L0014


Colour Choices:

The Anchor Strop is made from 30mm heavy duty polyester webbing with two reinforced eyes to allow a karabiner to be passed through.

This heavy duty sling is for use on steel structures.

Our Rope Sling can be used for many different applications. The high-twist 32-strand mantle braid provides high dirt resistance, better grip and high abrasion protection.

The sling has a tensile strength of 22kN.

• Rated load 40kN• Heavy duty polyester webbing• Individual serial number• Size variations available on request.

Specifications: • Material: Nylon• Size variations available on request.• Weight: 80g per metre• Sling strength: 22kN• For specifications of the rope used, please see page 61

Specifications:

Y SHAPEDROPE LANYARD

ROPELANYARD

Conforms to: EN354:2010


Product code(s): 30-60cm Lanyard: L0022

60cm Lanyard: L002260 80cm Lanyard: L002280

Product code(s): 60cm Lanyard: L001760 1.5m Lanyard: L0017150

1m Lanyard: L0017100 2m Lanyard: L0017200

The Y-Shaped Rope Lanyard has multiple applications, with a tensile strength of 22kN.

The high-twist 32-strand mantle braid provides for high dirt resistance, better grip and high abrasion protection.

The Standard Rope Lanyard has a tensile strength of 22kN. The high-twist 32-strand mantle braid provides high abrasion protection, better grip and high dirt resistance.

• Material: Nylon low stretch rope.• Sizes: Size variations available on request.• Sling Strength: 22kN.• Note: These lanyards are not to be used for fall arrest. Lanyards complying to

EN354 must be used in conjunction with an energy absorber complying to EN355 for fall arrest and not to exceed 2m in length.

• Material: Nylon low stretch rope.• Sizes: Size variations available on request.• Sling Strength: 22kN.• Note: These lanyards are not to be used for fall arrest. Lanyards complying to

EN354 must be used in conjunction with an energy absorber complying to EN355 for fall arrest and not to exceed 2m in length.

Specifications: Specifications:

26 27

Catalogue 2018/19

SHOCK ABSORBING LANYARDS

• Material: 25mm polyester superweb• Clip loop eyes: 2 per leg• Length from absorber eye to fly end eye: 1.3m.• Length when fitted with karabiner/connector: 1.6m• Maximum working load 130kg• Weight:

• Single Leg: 445g (for a 1.3m without connectors)• Twin Leg: 475g (for a 1.3m without connectors)

• Conforms to EN355:2002 shock absorbing lanyard• Note: Other lengths can be made, up to a max. total length of 2m or the

lanyard can be supplied without any connectors fitted

Specifications:

Product code(s): Single Leg: L0010S (without Scaff Hooks)Single Leg: L0010SC (with Scaff Hooks)

Twin Leg: L0010T (without scaff hooks)Twin Leg: L0010TC (with scaff hooks)

For more details on all of our connectors please see pages 36-41

SINGLE & TWINCLIP LOOP LANYARD Conforms to:

EN355:2002

The Single Clip Loop Lanyard is made using 25mm polyester superweb with a total length of 1.3m. It has a protected connection eye on the leg of the lanyard. This is so the user can wrap the lanyard around larger anchors and still load the connector/karabiner in the correct profile. This also shortens the lanyard therefore reducing any potential fall distance.

The lanyard can be supplied with or without scaffold hooks & karabiner. Any connector from our range conforming to EN362 can be fitted to the lanyard.

SHO

CK A

BSORBIN

G LA

NYA

RDS

Colour Choices:

28 29

Catalogue 2018/19

• Material: Nylon 11mm low stretch rope• Standard size 1.3m, variations on request• Maximum working load 130kg

• Material: Nylon 11mm low stretch rope• Sizes: 1.5m • Weight: 1.7kg• Maximum working load 130kg• Size variations available on request under 1.5m

• Standard: Total length 1.6m• Standard: length of each leg 1.2m• Weight: 1.65kg• Maximum working load 130kg• Note: Other lengths can be made, up to a max. total length of 2m or the

lanyard can be supplied without any connectors fitted

Specifications: Specifications: Specifications:

Product code(s): Single 1.6m with connectors: L0019C

Single 1.3m without connectors: L0019

Twin 1.6m with connectors: L0021CTwin 1.3m without connectors: L0021

Product code(s): Twin 1.5m with connectors: L0021F

Product code(s): Without Scaffold Hooks: L0001

With Scaffold Hooks: L0005

SINGLE & TWINROPE LANYARD

TWINROPE LANYARD

TWIN CLIPBACK LANYARD Conforms to:

EN355:2002



Colour Choices:Colour Choices:

For more details on all of our connectors please see pages 36-41

SHO

CK A

BSORBIN

G LA

NYA

RDS

Our Single & Twin Shock Absorbing Rope Lanyards are made using a nylon 11mm low stretch rope. This product is the right choice for many different applications. The high-twist 32-strand mantle braid provides for high abrasion protection, better grip, and high dirt resistance.

The lanyards are fitted with a large aluminium ring so that the connector on the fly end can be clipped back or parked in position.

All connectors fitted conform to EN362. Our rope lanyards come in the standard white with red fleck or black on request.

This Lanyard meets the BS EN8513 standard and can be made no more than 1.5m long including connectors. The lanyard is supplied with none detachable connectors conforming to EN362 to meet the standard.

Our Twin Shock Absorbing Rope Lanyard is made using a nylon 11mm low stretch rope. This product is the right choice for many different applications. The high-twist 32-strand mantle braid provides for high abrasion protection, better grip, and high dirt resistance. The lanyards are fitted with a large aluminium ring so that the connector on the fly end can be clipped back or parked in position.

The Twin Clip Back Lanyard has been designed to give real benefits to the user. It complies with all the required European standards for fall arrest and impact forces. It has two separate slings complying with EN795, EN566 & EN354. The shock absorber is compliant with EN355 and the connectors are compliant with EN362 & EN12275-Q.

Each sling has a webbing protection and reinforced eyes. Each sling leg can be replaced by SAR if damaged, increasing the usable life of the lanyard.

The lanyard has a total length of 1.6m. Other lengths can be made up to a max total length of 2m. The lanyard can also be supplied with or without any connectors fitted.

30 31

Catalogue 2018/19

ADJUSTABLE LANYARDS ADJUSTABLEROPE LANYARD

EASY ADJUSTROPE LANYARD

Conforms to: EN354:2010 & EN358:1999


Product code(s): 1m Lanyard: L0018100

1.5m Lanyard: L0018150

Product code(s): 1m Lanyard: L0018100AL

1.5m Lanyard: L0018150AL


AD

JUSTA

BLE LAN

YARD

S

The Adjustable Rope Lanyard is a good choice for many different applications.

Made with a galvanised steel slide buckle and with a tensile strength of 22kN, the high-twist 32-strand mantle braid provides high abrasion protection, better grip and high dirt resistance.

This lanyard is ideal for work positioning and work restraint and also passes the full standard EN354.

This style of Adjustable Rope Lanyard, utilising an aluminium buckle is a good choice for many different applications where easy adjustment is needed.

With a tensile strength of 15kN, the high-twist 32-strand mantle braid provides high abrasion protection, better grip and high dirt resistance.

This lanyard is ideal for work positioning and work restraint and is also a favourite for high rope course centres.

• Material: Nylon 11mm low stretch rope• Sizes: variations on request• Lanyard strength: 22kN• Note: These lanyards are not to be used for fall arrest. Lanyards complying to

EN354 must be used in conjunction with an energy absorber complying to EN355 for fall arrest and not to exceed 2m in length

Specifications: • Material: Nylon 11mm low stretch rope• Sizes: Eye size and length variations on request• Lanyard strength: 15kN• Note: These lanyards are not to be used for fall arrest

Specifications:

ADJUSTABLEWEBBING LANYARD Conforms to:

EN358:1999

Product code(s): 1m Lanyard: L0040-1

1.5m Lanyard: L0040-1.5

The Adjustable webbing lanyard is a good choice for many different applications. With a tensile strength of 15kN, made of high spec polyester webbing.

This lanyard is ideal for work positioning and work restraint.

• Material: High spec 25mm polyester webbing• Colours: Orange, Black, Blue, Yellow or Olive green• Lanyard strength: 15kN• Length: Variations on request.

Specifications:

Colour Choices:

NewProduct!

32 33

Catalogue 2018/19

WORK POSITIONING LANYARDS

• Average static load with above rope before creep 4kN• Static strength as in the test 15kN for 3mins• Weight: 315g + 80g per Meter of rope• Material: High strength alloy plates and handle anodized with stainless steel

cam and spindles• Colour: Black• Rope colour: white with red fleck/black on request• Size variations available on request• Conforms to EN 358 & EN12841-C

Specifications: Product code(s): with no connector

2m: RAD-2M 3m: RAD-3M4m:RAD-4M 5m: RAD-5M

Product code(s): with alloy hook2m: RAD-2MH 3m: RAD-3MH4m: RAD-4MH 5m: RAD-5MH

Product code(s): with scaffold hook2m: RAD-2MS 3m: RAD-3MS4m:RAD-4MS 5m: RAD-5MS

Our Rope Adjustment Device (RAD) evolved from our A-B Descender. Both multi functional devices, the RAD is smaller, lighter and has been tested to and conforms with more European standards for a wider variety of applications.

This means that the RAD can be used as a stand alone device in many more environments, therefore reducing the need for multiple devices and increased cost.

The RAD fully conforms to EN12841:2006-C, EN358:1999 & EN15151:2012 Type 6.

The swivel plate screw can be removed and the device opened for changing rope if inadvertently damaged during work, or for fitting onto a descent rope.

The RAD can be fitted with any length of rope you require. The rope used is our 11mm with a sewn eye at one end and a sewn block/stopper at the fly end. Any connector from our range complying to EN362 can be fitted to the rope.

The RAD can be used in many environments where an adjustable lanyard, pole strap/rope or restraint is required.

WO

RK POSITIO

NIN

G LA

NYA

RDS

RAD - WORKPOSITIONING LANYARD Conforms to:

EN358:1999 & EN12841-C

34 35

Catalogue 2018/19

KARABINERS GECKOKARABINER

GATORKARABINER

KLETKARABINER




• Material: Alloy, anodized black or gold screw gate• Strength: 30kN• Gate opening strength: 10kN• Sideways strength: 9kN• Gate open size: 22mm • Weight: 84g• Length:114mm• Width: 78mm• Individual serial number

• Material: Alloy, anodized black screwgate.• Strength: 25kN• Gate opening strength: 8kN • Sideways strength: 8kN• Gate open size: 15mm• Weight: 47g• Length: 100mm• Width: 64mm• Individual serial number

• Material: Alloy, anodized black or lobster • Strength: 30kN• Gate opening strength: 11kN• Sideways strength: 10kN• Gate open size: 26mm • Weight: 91g• Length: 119mm• Width: 77mm• Individual serial number

Specifications:

Specifications:

Specifications:

Product code(s): Gecko: K0001

Product code(s): Gator: K0016

Product code(s): Lobster Klet: K0005L

Black Klet: K0005B NSN:8465-99-488-9715

The Gecko is versatile and light. The Gecko is made from high grade alloy bar, which is then pressed into shape to give it extra strength.

This karabiner features a key lock design on the nose and gate to stop web catching.

The Gator karabiner, designed originally for sports climbing. The Gator is used for the rocker back-up sling assembly but is also ideal for use as a small spare karabiner for carrying accessories.

The Gator is made from high grade alloy bar, which is then pressed into shape to give it extra strength. This karabiner features a key lock design on the nose and gate to stop web catching.

The Klet karabiner is ideal for kits where weight is a factor and technical rope work required. It has a wide base and excellent gate clearance.

Made from high grade alloy bar, which is then pressed into shape to give extra strength, and a high tensile strength for its large size. The Klet features a screw closure and its key lock design gives it a catch free gate.

KARA

BINERS

36 37

Catalogue 2018/19KA

RABIN

ERS

HMS STEELKARABINER

LITEKLET

STEEL OVALKARABINER

STEELKLET

ALUMINIUMHOOK

TRIPLE ACTIONKLET







• Strength: 50kN • Gate opening strength: 12kN • Gate open size: 23mm • Weight: 266g • Length: 125mm • Width: 74mm

• Material: Alloy• Strength: 30kN• Gate opening strength: 10kN• Sideways strength: 10kN• Gate open size: 25mm• Weight: 72g• Length: 110mm• Width: 65mm• Individual serial number

• Material: Heat treated alloy, steel plated screwgate• Strength: 25kN• Gate open size: 18mm• Weight: 174g• Length: 107mm• Width: 56mm• Individual serial numbered on request

• Material: Steel zinc plated• Strength: 50kN• Gate opening strength: 20kN• Sideways strength: 15kN• Gate open size: 25mm• Weight: 235g• Length: 119mm• Width: 77mm• Individual serial number

• Weight: 144g• Gate opening gap: 21mm• Eye diameter: 18mm• Length: 134mm• Width: 68mm• Material: Aluminium• Finish: Natural• Minimum breaking strain: 25kN

• Material: Alloy• Strength: 30kN• Gate opening strength: 11kN• Sideways strength: 8kN• Gate open size: 26mm • Weight: 98g• Length: 119mm• Width: 77mm• Individual serial number




Product code(s): HSM Steel: K0009

Product code(s): Lite Klet: K0003

Product code(s): Steel Oval: K0017

Product code(s): Steel Klet: K0007

Product code(s): Aluminium Hook: K0006

Product code(s): Triple Action Klet: K0004

The HMS Steel karabiner is made from high grade steel, formed from round bar, has a screw gate and its strength has been increased to 50kN making it the ideal karabiner for industrial use in technical access and rescue as team kit.

The Lite Klet karabiner is ideal for kits where weight is a factor and technical rope work required. It has a wide base and excellent gate clearance.

Made from high grade alloy bar, which is then pressed into shape to give extra strength, and a high tensile strength for its large size. This variation of the Klet has the availability of having a pin fitted, making it ideal for adding to lanyards.

The standard Steel Oval karabiner with screw gate, with a high weight to strength ratio giving a high tensile strength making this a very versatile karabiner.

The steel variation of our Klet karabiner. The steel Klet has the same dimensions as the alloy Klet, a wide base and excellent gate clearance. Its heavier weight has the added benefit of almost doubling the tensile strength of the alloy version.

This karabiner features a screw closure and its key lock design gives it a catch free gate.

Our Aluminium Hook is ideal for use as a terminal and directional connector for lanyards. The double gate makes it easy to handle when wearing gloves and is shaped to protect the levers in case of impacts on flat surfaces.

The Triple Action Klet karabiner with a triple action lock gate, as with all of our Klet rage it features a high weight to strength ratio giving a high tensile strength making this a very versatile karabiner.

38 39

Catalogue 2018/19

DEESTEEL MAILLON

DOUBLE ACTIONSCAFFOLD HOOK

PEARSTEEL MAILLON

TRIPLE ACTIONSNAP HOOK

OVALSTEEL MAILLON

DELTASTEEL MAILLON

Conforms to: EN12275 & EN362:05/Q






• Material: Mild steel galvanised• Strength: 25kN• Gate open size:18mm• Weight: 174g• Length: 107mm • Width: 56mm• Individual serial numbered

• Weight: 490g• Gate opening: 65mm• Eye diameter: 30mm• Number of actions: 2• Material: Aluminium• Finish: Anodised• Colour: Natural• Minimum breaking strain: 25kN

• Material: Mild steel galvanised• Strength: WLL 720kg• Break load approx. 36kN• Gate open size: 20.5mm• Wire size: 10mm• Height: 118m• Width: 65mm• Weight: 184g• Individual serial numbered

• Weight: 108g• Gate opening gap: 22mm• Eye diameter: 20mm• Material: Aluminium• Finish: Anodized• Colour: red/grey, all black on request • Minimum breaking strain: 27kN• Individual serial number

• Material: Mild steel galvanised• Strength: WLL 800kg • Break load approx, 40kN • Gate open size: 16mm• Wire size: 7mm• Height: 78mm • Width: 30mm• Weight: 61g• Individual serial numbered

• Material: Mild steel galvanised• Strength: 45kN• Gate open size: 12mm• Wire size: 10mm. • Height: 88mm• Width: 66mm• Weight: 158g• Individual serial numbered

• Material: Mild steel galvanised• Strength: 27.5kN• Gate open size: 10mm• Wire size: 8mm• Height: 73mm• Width: 56mm• Weight: 92g• Individual serial numbered



Specifications: Specifications: 10mm Delta Specifications: 8mm Delta

Product code(s): 10mm: M0006

Product code(s): Double Action Scaffold Hook: X0035


Product code(s): Triple Action Snap Hook: X0079


Product code(s): 10mm Steel: M0001 10mm Black: M0001B8mm Steel: M0004 8mm Black: M0004B

The Dee Steel maillon was initially used by the sport & caving industry as a front connection to their sit harness. It allows the joining of the two webbing loops and also allows multiple connections of other mailions or karabiners.

The Double Action Scaffold Hook is the ideal connector for use on lanyards. The large gate opening makes this a versatile connector when working around steel work.

The Pear Steel maillon is used as an added connection to the front of sit harness, giving a second or third independent connection point.

It is also used in certain techniques in rescue for a multi connection point and its shape gives an added advantage to using the Dee or Delta maillon.

The Triple Action Snap Hook is fitted with a third action catch for increased safety. This triple-action hook is ideally suited for lanyards where triple action connectors are required. The safety heel further reduces the risk of accidental opening and the ‘Blind’ nose helps to prevent rope snagging.

The Oval Steel maillon is a long opening maillon and is possibly the most used style of all the maillon products. This maillon will cover most requirements in rope access and rescue, and can be used in lots of different areas.

The Steel Delta maillon is used mainly in rescue and rope access. It is used for three way loads, for equalizing two single pulleys to work as twin, to fix a pulley to an ascender for using it as a pulley brake and as a lifting link on stretcher straps to mention just a few.

KARA

BINERS

40 41

Catalogue 2018/19

ASCENDERS & DESCENDERS A-BDESCENDER Conforms to:

EN341-B:2011 and EN12841-C:2006

• Rope: 10.5mm to 12.5mm kernmantle• Max Load: 300kg• Control: Leaver/Cam & panic grab brake• Weight: 442gSample tests: • Min. Static Slip: 4.5kN 10.5mm x 22 plait • Route 44 Singing rock, 5.5kN 24 plait SAR. 8kN 12.5mm x 20 plait Cousin • Dynamic impact and slip distance 100kg FF1-1M: 10.5mm = 5.1kN & 51cm

6.2kN & 26cm, 12.5mm = 7kN & 15cm

Specifications:

Product code(s): Gold A-B: RA002

Black A-B: RA002BNSN: 4240-99-244-1085

ASC

END

ERS & DESC

END

ERS

Our A-B Descender has been designed for technical rope access, intervention, and rescue. It has a handle style control that can be used in two modes, either squeeze the handle or flip it down to give extra leverage when required. There is a spring fitted to help keep the handle close to the body when not in use and is also fitted with a panic grab brake.

The A-B fully conforms with two European standards, these are; EN12841-C rope adjustment device (descenders) and EN341-B descenders for rescue. The two standards are very different, EN12841-C covers the device only, so that it can be used with different types of kernmantle rope. EN341 is the standard for a descent rescue/egress system and any system conforming to this standard must be used with the type of rope with which it was tested.

Any strength quoted is when the product is new and is in accordance with the appropriate standards.

Colour Choices:

42 43

Catalogue 2018/19

RAD - ROPEADJUSTMENT DEVICE

PROALLP TECHConforms to:

EN12841:2006-C, EN15151:2012 Type 6 & EN358:1999Conforms to: EN341-B:2011 and EN12841-C:2006

• Control: Screw and Lever• Weight: 575g• Min Static slippage: 3.5 kN• Min Static load: against a barrel knot: 15kN• Max Impact:100kg mass F.F.2 with 1m strop: 6kN

• Weight: 310g• EN12841:2006-C – 10.5-12.7mm Rope Diameter rated to 200kg• EN358:1999 – 10.5-12.7mm Rope Diameter rated to 200kg• EN15151-1:2012 Type 6 – 9.9-11mm Dynamic Rope Diameter• Material: High strength alloy plates and handle anodized with stainless steel

cam and spindles.


Product code(s): Black Pro ALLP Tech: RA001B

Product code(s): RAD: X0147

The Pro ALLP Tech was the result of years of technical development and research and was originally designed for technical rescue. The screw control system of the Pro ALLP Tech has very fine speed control which allows the technical rope user a finer management of descent, especially in rescue.

The Pro ALLP Tech was the first descender to be tested to prEN 12841-C rope adjustment devices. Most personnel are lead to think that EN341 is the standard for descenders but this is incorrect. EN341 is descenders for rescue, which is a system, not an item of equipment, to fully conform with this standard the descender must be sold with the correct rope as a package.

The Pro ALLP Tech was tested under laboratory conditions and was proven to be compatible with low stretch ropes of 10.5 to 12.7mm from one manufacturer, in compliance with EN1891. The Pro ALLP Tech was also tested with a 200kg mass at F.F.1 1m.

We strongly recommend the that users be trained in the many applications of the Pro ALLP Tech.

Our RAD (Rope Adjustment Device) evolved from our A-B Descender. Both multi functional devices, the RAD is smaller, lighter and has been tested to and conforms with more European standards for a wider variety of applications.

This means that the RAD can be used as a stand alone device in many more environments, therefore reducing the need for multiple devices and increased cost. The RAD is capable of being used in many environments as a belay device or as a descender.

ASC

END

ERS & DESC

END

ERS

44 45

Catalogue 2018/19

FIGURE OF 8WITH EARS

CLEAN CAMASCENDER

STANDARDASCENDER

CHESTCROLL

Conforms to: EN567:1997 & EN12841:2006-B


Conforms to: EN567:2013 & EN12841:2006-B

• Rope size: 9 – 13mm dia.• MBS: 35kN• Colour: Black

Specifications: • Material: Anodized aluminium.• Colour: Right Handed: Lobster or Black - Left Handed: Black• Fits Rope Size: 8mm to 13mm• Weight: 216g

Specifications:

Product code(s): Figure of 8: RA017

Product code(s): Left Handed

Black: RA022BNSN:8465-99-153-7623

Product code(s): Right Handed

Lobster: RA023LBlack: RA023B

NSN:8465-99-687-3300

The Clean Cam Ascender is made for continuous use in the most arduous of conditions. The frames are formed using high strength aluminium plate and it has a stainless steel self clean cam. The handle grip is of soft moulded nylon.

This product comes as right and left handed. Right handed having a orange body & the left handed having a black body. The Right handed ascender is also available in all back.

The Figure of 8 descender is used for lowering or abseiling. Manufactured from high strength aluminium alloy. It has a large eye with room for an extra karabiner and ears to prevent the rope rolling into a locked position. The figure of 8 does twist the rope and is best used on firm rather than soft rope. It is not recommended for use with rope that comes straight out of a rope bag.

It should only be used with a back-up safety lock, such as a Rocker or Prussic style rope lock.

The chest croll was designed to fit flat against the body around the upper stomach/lower sternum area of the chest. Use along with a handled ascender and foot loop for ascending rope.

It can be connected to any of our harness range. Our Kite chest harness has the required connection strap included in its design to fit into the top strap hole of the Croll without the need for an extra shoulder strap.

The Ascender is made for continuous use in the most arduous of conditions. The frames are machined from high strength extruded aluminium and have a stainless steel cam.

This product comes as right or left handed, the right having a green handle and the left red. When tested on a 12.7mm superline there was a primary failure of the rope sheath at 11kN with the ascender still operable.

• Material: Anodized aluminium • Colour: Left Handed Red, Right Handed Green• Weight: 400g• Rope dia: 10 to13mm

• Material: Anodized Aluminium• Colour: Black • Fits Rope Size: 8 to 13mm• Weight: 130g• Standard: EN567• From summer 2015 this product will also conform to EN1284:2006-B for 10 -

13mm rope at 100kg


Product code(s): Left Handed: RA004

Right Handed: RA005

Product code(s): Chest Croll: RA009

ASC

END

ERS & DESC

END

ERS

46 47

Catalogue 2018/19

ROCKERBACK-UP DEVICE Conforms to:

EN353-2:2002, EN358:2000 & EN12841-A:2006

• Average static load: 3.5kN• Max dynamic impact: 5.9kN• Static strength: 15kN• Max dynamic impact: 200kg 5.7kN• Max Static 350kg• Weight: 169g• Material high strength alloy with hard anodising on cams

Uses:• Fall arrest back up device• Work positioning locking device• Horizontal safety line absorbing anchor• Rope Access & Rescue safety back-up• Pulley brake• Ascender• Belay brake

Specifications:

Product code(s): Gold Rocker: RA003

Black Rocker: RA003BNSN: 4240-99-820-0579

Rocker Sling Assembly: S0014

Colour Choices:

The Rocker is primarily used as a safety back-up in industrial rope access, fire service or technical rescue as a fall arrest device in the event of main line failure.

It can also be used as a rescue back-up device for two people as the Rocker has been tested for this purpose using a 200kg mass in a fall factor two scenario. The test was undertaken using an 11mm, 32plait low stretch rope and a 1m sling. The maximum impact recorded was 5.7kN, with a slip distance of 1.10m.

The Rocker complies to EN353-2:02, EN358:00 and EN12841-A:06. We recommend it to be used with a 10 cm Rocker link sling with two Gator karabiners. This set up comes as a kit for use with the Rocker and we highly recommend it to be connected to the chest connection point on the harness. This would put the user in an upright position and is therefore compliant with fall arrest standards. It is for this reason it is also not recommended to be used with a long cow’s tail from the waist connection point of the harness.

BAC

K UP D

EVICES

This device can also be used in many other situations i.e. as a hauling/pulley bake etc.

The Rocker was confirmed in the U.K. H.S.E. industrial rope access investigation into items of personal protective equipment as the best performer and to have the highest degree of consistency.

We strongly recommend that users be trained in use of the Rocker.

Rocker Sling AssemblyFor more information see page 23

48 49

BACK UP DEVICES

Catalogue 2018/19

PULLEYS & PULLEY SYSTEMS MINIPULLEYS

STANDARDPULLEYS



• Side plate size: Height 75mm• Width: 45mm• Material: High grade alloy• Strength: 36kN• Weight: 87g• Max 13mm rope• Individual serial number






Product code(s): Single Mini Pulley: P0010

Double Mini Pulley: P0014

Product code(s): Single Standard Pulley: P0016

Double Standard Pulley: P0019


PULLEYS & PU

LLEY SYSTEMS

The Double Pulley has been produced for those who prefer specific kit systems. Both styles have swivel cheek/side plates for ease of fitting to rope.

The Double Pulley of this set is mainly used in systems that are pre-rigged or as traveller pulleys along twin line cable-ways.

This Standard Pulley size is the most common. The standard single pulley can be used in all situations. With knowledge and experience it is the ideal pulley to be used in a rescue teams or access teams kit.

This Mini Pulley has been designed for the individual and as an aid for the big wall climbers in the sporting environment.

50 51

Catalogue 2018/19


• Side plate size: Height 130mm• Width: 88mm• Material: Stainless steel• Finish: Polished• Strength: 40kN• Weight: 398g• Max 13mm rope

• Max working length: 2m• Pulley working ratio: 6-1• W.L.L. 150kg safety factor 6-1• Pouch Size: 20cm x 16cm x 7cm• Weight: 812g• Fits onto harness waist belt and comes with its own waist strap• Variations in lengths on request

• Max. working length from the casualty: 7.5m• Max. working length from top anchor: 10m• W.L.L. 150kg safety factor 6-1• Pulley working ratio: 3-1• Weight: 2kg• Bag size: 40cm long x 20cm dia• Variation in lengths on request

Specifications: Specifications: Specifications: Specifications:

Product code(s): Single Double Ended Pulley: P0018

Product code(s): Single Steel Pulley: P0020

Product code(s): 6-1 Pulley System: P0001

Product code(s): 3-1 Pulley System: P0002

SINGLE DOUBLEENDED PULLEY

SINGLESTEEL PULLEY

CASUALTY PULLEY SYSTEM

RESCUEPULLEY SYSTEM


Conforms to: EN12278:1998 & NFPA 1983

Colour Choices:

The Single Double Ended pulley is used in systems along with the double pulley.

It can be used for all the same uses as the standard single with a extra connection point. This makes the product ideal where there is a requirement for the twin connections.

The Single Steel Pulley has been designed for use with wire rope and for use on zip wires. The bushing bearing on this pulley is ideal for high loads.

A Double Steel Pulley can be produced on request

Our Casualty Pulley System uses small marine grade pulleys and 6mm prussic cord and is used to lift casualties onto stretchers or transfer their load from safety lines, slings or rope to the rescuer or rescue system.

It has a 6:1 mechanical advantage ratio and when tested with the cord and positioned in its locking cleat held at 9kN.

It is both neat and compact and comes as shown with chest ascender and karabiner fitted complete with its own storage pouch.

PULLEYS & PU

LLEY SYSTEMS

The Rescue Pulley System is made from marine grade pulleys and 8mm kernmantle cord, has an integral twin cam brake that can be set at differing angles for positive locking or unlocking and has a 3:1 mechanical advantage ratio.

It is an ideal piece of kit for getting an injured worker up a cable line, off an activated lanyard or transferring from rope to rope, along with many other emergency applications.

It must always be used along with a safety back-up system.

52 53

Catalogue 2018/19

BAGS ROPE BAGS

• Small Bag - 20Ltrs or 66m of 11mm rope • Medium Bag - 30Ltrs or 100m of 11mm rope • Large Bag - 50Ltrs or 200m of 11mm rope• X Large Bag - 84Ltrs or 250m of 11mm rope

Sizes: Product code(s): Rope Bags

Small Bag: B0003Medium Bag: B0006

Large Bag: B0009X Large Bag: B0012

Product code(s): Rescue Rope BagsSmall Rescue Bag: B0008

Medium Rescue Bag: B0007Large Rescue Bag: B0010

Colour Choices:

Our Rope Bags are available in four sizes and six different colours. All SAR bags have an outside pocket for any documentation such as the rope record card, draw cord closure and fitted stainless steel hauling karabiner.

Our small bag has one simple adjustable shoulder carrying strap. The medium, large and ex. large bags have twin adjustable shoulder straps and a side carrying strap. All the bags are made from heavy duty high grade PVC reinforced polyester.

The Rescue Rope Bag is a customised version of our rope bag with a red reflective rescue label and reflective strip. The bags can be any colour within our stock range, with red being the standard colour for rescue bags.

BAG

S

54 55

Catalogue 2018/19

EQUIPMENTBACKPACK

35L EQUIPMENTHOLDALL

EQUIPMENTPOUCH

CRAGKIT BAG

75L EQUIPMENTHOLDALL

BOLTBAG

Colour Choices: Colour Choices:Colour Choices: Colour Choices:

Product code(s): Equipment Backpack: B0015

Product code(s): 35L Holdall: B0018

Product code(s): Crag Kit Bag: B0026

Product code(s): 75L Holdall: B0019

• Small - Height 15cm x Width 9cm x Depth 5cm• Med - Height 20cm x Width 16cm x Depth 7cm• Large - Height 23cm x Width 18cm x Depth 7cm

• Height: 27cm• Width: 23cm• Depth: 7cm• Weight: 472g

• Height: 34cm• Width: 23cm• Depth: 7cm• Weight: 558g

Sizes: Sizes: Medium Sizes: Large

The Equipment Backpack has been designed for rope access and rescue personnel to carry their individual equipment such as harness, helmet, slings, karabiners etc.

On the outside front panel is an equipment draw cord for carrying such items as rope, splints, etc.

It has two rucksack style shoulder straps and top carrying handle.

The Crag Kit Bag was designed in association with the Oldham Mountain Rescue Team.

With a number of compartments on internal walls that fold out it is an ideal way to keep the team kit knowing that it is all in the one bag and easy to access.

The Crag Kit Bag comes complete with shoulder straps.

The Equipment Bag is a multipurpose draw string bag made from heavy duty cordura nylon.

The bag has an adjustable shoulder strap, drain hole, and a steel spring hook so you can attach it to other equipment and gear loops.

Our Equipment Pouches come in three sizes and are made from heavy duty cordura nylon.

The smallest is mainly used as a harness pouch, the other two for equipment storage within your equipment bag.

They have velcro belt loops that can be used to strap them on your carrying bag or back pack.

The Bolt Bag is made from heavy duty hard wearing materials.

It has a velcro flap lid, two belt loops that can be threaded onto a waist belt on your harness and two drain holes in the base.

The 35L holdall is a standard simple design with a single zip closure with reinforced carrying handles. The bag is made from the same high quality material as our rope bags and equipment backpack. The holdall is available in six different colours, blue being standard.

The 75L equipment holdall has been designed for rope access and rescue personnel to carry their individual equipment and for those wishing to pack team equipment into one bag.

The twin zip flap lid allows the user to access all areas of the bag with ease. The bag has two carrying strap handles that are reinforced around the base of the bag, two drag handles at each end that can be used for hauling vertically when required and two padded shoulder carrying straps.

BAG

S

ROPELEG BAG

EQUIPMENTBAG

Colour Choices:

Product code(s): Rope Leg Bag: B0014

Product code(s): Equipment Bag: B0016SARBK

Product code(s): Small: B0021 Medium: B0024 Large: B0025

The Leg Rope Bag has been designed looking at slight modifications to the standard to enhance the fit and securing system.

Made from heavy duty black cordura nylon with velcro leg securing straps, foot loop/stirrup strap and a hand carry strap which will allow the user to clip the bag onto their harness if required.

It has a comfortable rope capacity of 40metres of 11mm rope.

Product code(s): Medium: B0027 Large: B0029

56 57

Catalogue 2018/19

ROPE

Product code(s): White with red fleck Rope: RR002

Black Rope: RR002B NSN: 4020-99-887-0485

11mm STANDARDLOW STRETCH ROPE

11 mm RESCUE& ACCESS ROPE

Conforms to: EN1891-A:1998


Product code(s): 11mm Low Stretch Rope: RR001

Colour Choices:


The 11mm Rescue & Access Tactical Rope has been developed to withstand heavy loads for e.g. winches, dirt and climatic influences.

The rope is extremely robust and compact and also soft in handling making it ideal for tactical intervention and rescue. The rope has a tensile strength of 32kN.

• Diameter: 11mm• Material: Low stretch nylon• Outer plait (sheath): 16• Outer braids: 32• Inner core: 14• Static strength: 32kN• Static strength fig 8 knot: 18kN

• Diameter: 10.6mm • Material: Low Stretch Nylon • Outer Plait (Sheath): 32 • Outer Braids: 64 • Inner Core: 16• Static strength: 34kN • Static strength fig 8 knot: 15kN

• Diameter: 11mm• Material: Low stretch nylon• Outer plait (sheath): 16• Outer braids: 32• Inner core: 14• Static strength: 32kN• Static strength fig 8 knot: 18kN

Specifications:

Specifications:

Specifications:

10.6mm LOWSTRETCH ROPE

ACCESSORYCORD



Product code(s): 10.6mm Rope: RR002W

Product code(s): 6mm Cord: RR0128mm Cord: RR013

The 10.6mm Low Stretch Rope has been developed to withstand heavy loads for e.g. winches, dirt and climatic influences.

The rope is extremely robust and compact and also soft in handling making it ideal for tactical intervention and rescue. The rope has a tensile strength of 34kN.

The Prusik cord is made of high grade polyester and is used for Prusik slings and for universal applications.

The high twist 32 strand mantle braid makes the accessory cord immune to dirt and provides for ergonomic handling and high abrasion resistance. High quality manufacturing provides for high strength and a low danger of cracking.

• High-grade polyester• High-twist 32-strand mantle braid• Slip-proof, dirt-resistant, abrasion-resistant• 6mm and 8mm• Minimum breaking strength 6mm Cord 940daN • Minimum breaking strength 8mm Cord 1400daN

Specifications:

• Static strength fig 10 knot: 22kN• Elongation: 3-5%• Free cutting and labelling service on

orders. • Rope can be cut up to 200m on standard

orders and 700m on special request.

• Free cutting and labelling service on orders

• Rope can be cut up to 200m on standard orders and 700m on special request

• Static strength fig 10 knot: 22kN• Elongation: 3-5%• Free cutting and labelling service on

orders. • Rope can be cut up to 200m on standard

orders and 700m on special request.

ROPE

Our Low Stretch Rope is exceptionally appealing because of its low weight and high breaking strength.

Due to the high strength and the low danger of cracking, SAR ropes are the right choice for many different applications.

The high-twist 32-strand mantle braid provides for high dirt resistance, better grip and high abrasion protection.

58 59

Catalogue 2018/19

ROPEPROTECTORS

ROPEDOGS

EDGEBARS

STITCHEDROPE EYE

FLAT PADROPE PROTECTOR

KNOTTED NYLONEYE WITH HEATSHRINK

• Width: 15cm• Length: 50cm • Velcro fastener• 4mm cord tab• Colour: Red

• Width: 15cm• Length: 70cm• Velcro fastener• 4mm cord tab• Colours: Yellow or black

• Sewn terminated eye• Individual serial number per set

• Static strength 22kN

• Stainless steel bars• Aluminium powder coated side plates• Segment/unit length: 150mm• Segment/unit width: 100mm• Weight: inclusive of maillons 332gm per segment.• Total weight inc. equipment pouch: 728g

• Width: 30cm• Length: 50cm• Velcro fastener• 4mm cord tab

Specifications: Heavy Duty Specifications: Standard

Specifications:

Specifications:

Specifications:

Specifications:

Product code(s): Heavy Duty: RR020

Standard: RR021

Product code(s): Rope Dogs: RR025

Product code(s): Edge Bars : RA015

Product code(s): Stitched Rope Eye: RR015

Product code(s): Flat Pad Rope Protector: RR019

Product code(s): Knotted Nylon Eye With Heatshrink: RR014

Our heavy duty Rope Protector is made from high quality polyester. They are extra thick giving more protection over sharp edges than the standard Rope Protectors.

Our standard Rope Protectors are made from PVC reinforced polyester sheet material available in blue, red, black or yellow. On running ropes both the above can glaze due to friction.

Rope Dogs are a soft type of rope clamp used in preference to mechanical devices where some types of rope clamp will grip the rope until the rope sheath or mantle will rip or tear. The rope dog will slip, therefore being kinder to the rope it is attached to. This makes the Rope Dog ideal for tensioning systems where overloading would cause a system failure. The Rope Dog can also be off loaded and re-loaded whilst under tension.

Our Rope Dogs are manufactured using 11mm nylon rope. This makes it ideal for use with a variety of ropes from 10.5-12.5mm in diameter. Correct loading of the Rope Dog is vitally important, if loaded too loose it will slip at lower loads than if loaded correctly.

The Edge Bars have been designed as a caterpillar/edge roller style rack. Made in two segments of four 12.5mm dia. x 100mm stainless steel fixed bars. The two segments with two bars each give a total length of 32cm. Each segment is joined by two small steel maillons so they can be disconnected and used as two separate units if required, or others can be added.

The full unit comes with in an Equipment Pouch that can be fitted to a belt or back pack straps.

We can add a sewn eye termination on any length of 11mm rope in our range. The sewn termination has passed the test requirements of a sewn termination.

All rope sewn terminations are marked up with a unique serial number, length, rope diameter, and year of manufacture.

The sewn eye is also covered with a transparent protective sheath that helps protect the stitching against abrasion and the ingress of dirt but allows for the ease of inspection. All standard eyes can be fitted with a thimble to protect the rope.

This Rope Protector is a two sided multi use rope protector. One side is made using heavy duty polyester webbing for use with static ropes and the other side is canvas for use with running ropes. Sandwiched in between is 6mm foam for extra padding.

The Rope Protector can also be wrapped around rope using the velcro fastener.

This system shows a barrel knot used with a nylon eye and heat shrink and the karabiner is clipped into the loop of rope running through the rope slider.

A fig 10 knot sealed in clear heat shrink can also be used and has a higher tensile strength than the barrel knot and the standard figure of eight knot. The figure of 10 knot will on most 10.5mm and 11mm kernmantle ropes hold a static load of 22kN for three minutes as required by EN353-2 back-up safety devices on flexible line.

ROPE

60 61

Catalogue 2018/19

STRETCHERS & ACCESSORIES

• Width: 68cm• Length: 205cm• Packed size inc. bag: 75 x 30cm• Weight: 7.2kg• The EVAC stretcher conforms to EC Declaration Of Conformity 93/42/EEC

concerning medical devices. Article 11 (5) and annex VII Class 1 devices.

Specifications:

STRETCH

ERS & ACC

ESSORIES

We are always striving to keep at the forefront of development & design. As a result of this we have once again improved our EVAC body splint. The thickness of the lower outer skin has been increased to give more resistance to abrasion, whilst using a new lightweight material on the upper skin in order to maintain the overall weight of the item. We have also changed the head strap to give two fitting systems to give a firmer head restraint.

The EVAC has a width of 68cm across both the shoulder and hip areas and is 205cm long, giving more security and protection to the casualty.

It has six horizontal lifting loops, three down each side, positioned along the main trunk/torso of the casualty. All the main casualty securing cross straps are of 50mm webbing with adjustable clip buckles. It has an integral body harness made from 25mm web with crutch padding and adjustable foot support with padding for extra security and to stop body slip when in a vertical or angular mode of lift.

The two main vertical lifting loops are positioned at the shoulder which gives a true vertical lifting position for the casualty. The head section can be formed into a cone to disperse debris when dragging through confined spaces.

The strap holding the Body Splint in position when rolled has a fitted pad and can be used for a head restraint by threading it around the outer loops on the coned area.

It can also be used as a lifting mat without the use of the straps. Two people can transfer a casualty from one flat area to another keeping the casualty in a horizontal mode.

The lower outer material is made from orange flame retardant, heavy duty PVC reinforced with nylon. The inner and bag are made from standard PVC reinforced with nylon.

EVAC BODY SPLINT

Colour Choices:Product code(s): EVAC Splint: ST003

62 63

Catalogue 2018/19

• Weight of stretcher: 11kg• Lifting straps: 1.2M - 1.40kg• Length open: 210cm• Length folded: 105cm• Max width: 60cm• Runner depth: 9cm• Stretcher depth: 12cm• Powder Coated Silver Metallic

• Weight of stretcher: 13.45kg• Weight of lifting straps: 1.75kg• Length open: 2.1m• Length folded: 1.05m• Max width: 60cm• Runner depth: 7cm

• Stretcher: 12.45kg• Handles: 2.45kg• Lifting straps: 2m - 1.60kg• Length open: 210cm• Length folded: 105cm• Max width: 60cm• Runner depth 9cm• Stretcher depth: 12cm• Powder Coated Silver Metallic

• Weight of stretcher: 15.02kg• Weight of handles: 3.42kg• Weight of Lifting straps: 1.80kg• Length open: 2.1m• Length folded: 1.05m• Max width: 60cm• Runner depth 7cm

Specifications: Alpine CR Lite Specifications: Alpine CR

Specifications: Alpine MR Lite Specifications: Alpine MR

The Alpine stretchers have been designed with the ever growing population in mind. It is slightly larger all round as the section from the shoulders to the hips has been made parallel and the length has been increased by 10cm. The flat bed style of the Alpine stretchers gives excellent security for spinal injuries and makes the loading of the casualty much better than a basket type stretcher, allowing far more casualty care.

All versions of the Alpine stretcher fold in half ski to ski to facilitate easy backpacking by one person, to reduce bulk on the carriers back and for economical storage. When the stretcher is opened to receive a casualty it is not reliant on the side locks to remain secure when in the horizontal position, however the locks are required when being used for vertical lifting, when sliding/sledging over edges or rough terrain.

The mountain rescue (MR) stretcher has a ski pan set between the head end skis for ease of sliding over rough terrain and snow but more importantly to protect the casualty’s back from rocks etc. The stretcher can be split in 2, if required for long carries into casualty sites but due to the lightness of the stretcher this is not always necessary.

Both the MR & CR stretcher come with casualty securing straps and lifting straps, (2 metre straps for the MR, 1.2 metre straps for the CR) and these may be used for lifting, winching, carrying, sledging or as pulling straps.

The stretcher comes with storage bag that has a single padded shoulder carrying strap and outside pouch for inspection record card. Carrying handles can be fitted to the stretcher, and they come as standard with the MR stretcher.Both accept the fitting of the stretcher wheel and head protection canopy. These must be ordered separately.

The Stretchers Conform To:EC Declaration Of Conformity 93/42/EEC concerning medical devices. Article 11 (5) and annex VII Class 1 devices.

STRETCH

ERS & ACC

ESSORIES

ALPINELITE STRETCHER

ALPINESTEEL STRETCHER

Product code(s): Alpine CR Lite (Civil Rescue) REF: ST001L

Alpine MR Lite (Mountain Rescue) REF : ST002L

Product code(s): Alpine CR (Civil Rescue) REF: ST001

Alpine MR (Mountain Rescue) REF : ST002

64 65

The Alpine Lite stretchers have been designed with the ever growing population in mind. It is slightly larger all round and the section from the shoulders to the hips has been made parallel and the length has been increased by 10cm. The flat bed style of the Alpine lite stretchers gives excellent security for spinal injuries and makes the loading of the casualty much better than a basket type stretcher, allowing far more casualty care. All versions of the Alpine stretcher fold in half, ski to ski, to facilitate easy backpacking by one person, to reduce bulk on the carriers back and for economical storage.

When the stretcher is opened to receive a casualty it is not reliant on the side locks to remain secure when in the horizontal position, however the locks are required when being used for vertical lifting, when sliding/sledging over edges or rough terrain. The mountain rescue (MR) stretcher has a ski pan set between the head end skis for ease of sliding over rough terrain and snow, but more importantly to protect the casualty’s back from rocks etc.

Also the ski sections have an added high grade polyethylene ski fixed to them as a protection for the alloy over rock, gravel or any other hard abrasive surface.

The stretcher can be split in 2, if required for long carries into casualty sites but due to the lightness of the stretcher this is not always necessary.

Both the MR & CR stretcher come with casualty securing straps and lifting straps, (2 metre straps for the MR, 1.2 metre straps for the CR) and these may be used for lifting, winching, carrying, sledging or as pulling straps.

The stretcher comes with storage bag that has a single padded shoulder carrying strap and outside pouch for inspection record card. Carrying handles can be fitted to the stretcher, and they come as standard on the MR stretcher.Both accept the fitting of the stretcher wheel and head protection canopy. These must be ordered separately.

The Stretchers Conform To:EC Declaration Of Conformity 93/42/EEC concerning medical devices. Article 11 (5) and annex VII Class 1 devices. The stretcher has been lifted by the RAF in exercise with the Oldham Mountain Rescue Team and found to be no different in handling to that of the steel version.

Catalogue 2018/19STRETC

HERS & A

CCESSO

RIES

ADJUSTABLE STRETCHER LIFTING SLINGS

ALPINESTRETCHER WHEEL

BASKET STRETCHERLIFTING SLINGS

ALPINESTRETCHER HANDLES

STRETCHERLIFTING BRIDAL

EVACLIFTING SLINGS

• Tensile Strength of each Strap: 11kN• 2 Straps vertical lift: 22kN.• 4 Straps horizontal lift: 44kN• All connections using Maillons EN362:05/Q & EN12275 • Weight: 1.4kg (1.2m lifting slings)

• Tensile Strength of each Strap: 11kN• 2 Straps vertical lift: 22kN• 4 Straps horizontal lift: 44kN • Central connections: 3 Maillons EN362:05/Q & EN12275.• Stretcher Connection: Extra large karabiner 40kN EN362 with a 48mm gate opening• Weight: 2.5kg

• Tensile Strength of each Strap: 11kN• 2 Strap vertical lift: 22kN• 4 straps horizontal lift: 44kN • Central connections: 3 x Maillons EN362:05/Q & EN12275.• Stretcher Connection: Extra large karabiner 40kN EN362 with a 48mm gate opening• Weight: 2.5kg

• Standards conforming to: Slings EN354, EN566, & EN795-B. Karabiner EN362 and Maillons - EN362:05/Q & EN12275

• Max length of each leg including connectors:73cm• Weight complete with connectors: 1.2kg• Weight of bag: 58g• Standard Colour: Orange

Specifications:

Specifications:

Specifications:

Specifications:

Product code(s): Alpine CR 1.2m Adjustable Stretcher Lifting Slings: ST007 Alpine MR 2m Adjustable Stretcher Lifting Slings: ST016

Product code(s): Steel Stretcher Wheel (Red): ST004Lite Stretcher Wheel (Grey): ST004L

Product code(s): 1.2m Basket stretcher Lifting Slings: ST008

Product code(s): Steel Stretcher Handles (Red): ST014Lite Stretcher Handles (Grey): ST014L

Product code(s): Stretcher Lifting Bridal: ST020

Product code(s): EVAC Lifting Sling: ST021

The Adjustable Stretcher Lifting Slings have been designed for rescue, therefore are not (PPE) personal protective equipment. They are adjustable lifting slings for use with stretchers in mountaineering, industrial rescue and helicopter winching. They can also be used for lifting and lowering in both horizontal and vertical positions.

The Adjustable Lifting Slings have been approved for lift by RAF SAR Force UK & Bristow UK Search and Rescue

The Stretcher wheel frame has been designed to be assembled quickly and easily by just slotting the foot end forks into the main front forks. The frame connects onto the stretcher bed frame in four places.

The angle of the frame down to the wheel puts all the downward force onto the wheel axle as is normal with a bike.

The Basket Stretcher Lifting Slings have been designed for rescue, therefore are not (PPE) personal protective equipment. They are adjustable in length with large connectors for use with stretchers in mountaineering, industrial rescue and helicopter winching. They can also be used for lifting and lowering in both horizontal and vertical positions.

Our stretcher handles have been redesigned to improve the fitting system. They are now fitted using a screw making it easier to fit and to give more security.

Adaptation kits can be bought to bring the older stretcher handles in line with the latest development.

The Stretcher Lifting Bridal has been designed for rescue, therefore are not (PPE) personal protective equipment. They are adjustable liftings slings for use with stretchers in mountaineering, industrial rescue and helicopter winching. They can also be used for lifting and lowering in both horizontal and vertical positions.

The EVAC Lifting Slings have been designed for rescue and are made up of items conforming to the relevant standards for (PPE) personal protective equipment. They are for use with stretchers in mountaineering, industrial rescue and helicopter winching.

The complete set is made up of 4 x 60cm twin eye slings, 4 steel oval karabiners and 2 medium and 1 large delta maillons. Each of the items can be used independently if needed. They come complete with their own equipment storage pouch.

66 67

Catalogue 2018/19

QUADPOD & WINCH QUADPOD

Materials & Coatings:• Legs: Aluminium powder coated• Head: Stainless steel powder coated• Eye bolts & pins: Stainless steel & mild steel nickel plated• Feet: Flexible studded rubber• Straps: Polyester webbing, hooks steel nickel plated• Leg Adjustment: 10 holes on each leg• Max height as standard pyramid: 2m• Packed size in bag: 1.2m x 17cm dia• Standard: EN795-B• WLL in a standard pyramid shape 500kg

Weight:• Quadpod: 12.8kg • Leg straps: 1.0kg

Specifications:

Conforms to: EN795-B

QU

AD

POD

& WIN

CH

The Quadpod is a multi adjustable portable anchor. It was designed to supersede the tripod, design to provide more stability and reliability during a rescue situation. It is in use all over the world by many rescue organisations, military units and the UK coastguard.

The Quadpod can be used in many modes and gives greater access to areas that tripods or other devices cannot access. The head of the Quadpod has multi-connection points, and up to two legs can be disconnected for special uses or transportation.

It has been found that the need to have a 2.3m - 2.5m centre height for confined space rescue is not necessary when using the Quadpod. The extraction of casualties in body splints/stretchers once partially extracted can be brought out the rest of the way at an angle giving more casualty care, room and stability.

It comes complete with leg straps and a storage bag. These products can also be purchased separately.

Product code(s): Quadpod: QU001

68 69

Catalogue 2018/19

WINCH

The Winch has been made to fit in various positions on our Quadpod. It can also be used separately from the Quadpod, however this would require training for the users.

Our winch can be used with kernmantle rope size between 10.5-12.5mm. The lifting load is dependent on the type of rope and the number of turns on the capstan before fitting into the self tailing guide.

As a guide, using 11mm rope with two turns on the capstan, then a third turn placed onto the self tailing guide and into the gripping flange, the maximum load it will take is approx. 250kg. At this load the rope will start to slip in the gripping flange so as not to over load the system. One person can lift or lower two people easily.

There should always be a safety back-up system in place and a rope lock on the main rope i.e. the Rocker. We strongly advise that users be trained in its many uses and learn about its physical strengths and weaknesses.

The Quad leg straps come as standard when ordering the Quadpod. The straps are light to carry and pack into the bags’ side pouch. They are extremely fast to connect and have very fine adjustment.

The Quadpod bag comes as standard when ordering the Quadpod. The bag has an adjustable strap for carrying over the shoulder and has two storage compartments for straps and documents.

QU

AD

POD

& WIN

CH

QUADPODBAG

QUADLEG STRAPS

• Heavy duty PVC• Side pouch for leg straps/documentation• Colours: Blue or Black

• Materials: Polyester webbing, mild steel plated buckle• Plated hardened steel hooks• Colours: Black or Orange• Weight: 1kg per set of 4• Strength: 300kg each strap

Specifications: Specifications: • Two Speeds: 3 – 1 & 9 – 1.• Separate handle• Weight: 12.8kg• Complete with storage bag

Materials: • Winch: Stainless steel and brass• Bracket: High grade alloy, pins in plated mild steel

Specifications:

Product code(s): Winch: QW001

Product code(s): Quadpod Bag: QU003

Product code(s): Quad Straps: QU002


70 71

Catalogue 2018/19

• Material: ABS (Acrylonitrile Butadiene Styrene).

• External shell: Advanced thermo material (ABS)

• Internal shell: High density polystyrene (EPS)

• Size: unisize 54/62cm• Weight: 400g

• Material: ABS (Acrylonitrile Butadiene Styrene).

• External shell: advanced thermo material (ABS)

• Internal shell: High density polystyrene (EPS)

• Size: unisize 54/62cm • Weight: 395g

Specifications: EN397 Specifications: EN12492

INDUSTRIAL &CLIMBING HELMETS

GROUNDSPIDER

Conforms to: EN397:2012 or EN12492:2012

Industrial Helmet - EN397On the Industrial helmet the ventilation holes are closed. The chinstrap is designed to open in case of collision: opening at 25 daN (According to European standard EN397 for safety helmets). The helmet meets the following optional requirements: lateral deformation and low temperature use (-30°C).The helmet is fitted with clips for fixing a headlamp. It is suitable for all types of work at height and for industrial use.

Mountaineering Helmet - EN12492This helmet has a new Up/Down adjustable size system for better fitting and comfort.Headband covered with allergenic textile.The helmet is fitted with clips for fixing a headlamp.This helmet has been designed for canyoning, mountaineering, ice climbing, caving & sport climbing.It is also suitable for school camps and adventure parks.

The Ground Spider is made from a high specification alloy bar and each spike inter-folds along the main bar for storage and stops the spike from damaging other equipment or causing injury. The Ground Spider comes with its own storage bag made from heavy duty nylon cordura.

Each leg is linked using a 60mm x 18cm round sling and a medium delta maillon both of which conform to the relevant EN standards. All the items are in black and pack away to an approximate size of 40cm long and 7cm in diameter, tapering to 4cm.

There is no formal test procedure or standard for this item, however it has been load tested to 15kN and it held for three minutes as required in most EN standards. Users must be competent and trained and fully understand how it holds on different types of ground.

ACC

ESSORIES

ACCESSORIES

Product code(s): Industrial Helmet: HP004IND

Mountaineering Helmet: HP004

Product code(s): Ground Spider: RS007

Colour Choices:

• Material: Main bars, aluminium powder coated• Sling: Superweb polyester• Maillon: Steel plated• Bag: Nylon cordura• Colour: Black• Leg length: 3 x 33cm and 2 x 26cm• Spike length: 15cm• Sling: 60cm Circ. x 18mm superweb - EN354, EN566 & EN795-B• Delta maillon: 8mm EN362:05/Q & 12275• Weight: 832g• Strength: Lab test only, 15kN

Specifications:

72 73

Catalogue 2018/19

The knife blade is stainless steel and is razor sharp, it easily cuts an 11mm rope even if it is not loaded. The knife is designed so you select the rope you want to cut to insert it into the opening. The blade is protected to prevent accidental cutting when it hangs on the pouch.

The knife is connected to the pouch with a 3mm elastic safety cord. The pouch has a press stud lid and a velcro belt loop to enable you to fix it to your waist belt without the need for threading.

Rigging plates were developed for putting multiple connections into one point or anchor. They are to help clean up a system of multi connections and to help stop twist from karabiner to karabiner.

They are increasing in popularity with Fire & Rescue rope teams, available in three sizes: small, medium, and large.

Our access seat has been designed to give the user extra comfort. It connects to the karabiner attached to the waist belay point on your harness. With adjustable straps so the load is taken from the harness. It has two gear rings on each side.

Manufactured from heavy duty PVC reinforced polyester and strong polyester straps with a 12mm plastic base with closed cell foam padding. Easy to fold away flat when not in use.

ACC

ESSORIES

ROPEGLOVES

KNIFE& POUCH

RIGGINGPLATES

ACCESSSEAT

FOOTLOOPS

LIFTINGBRIDAL

5 RUNGETRIER

Product code(s): Rope Gloves: RS011

Product code(s): Knife & Pouch: RS006

Product code(s): Access Seat: RS009

Product code(s): Lifting Bridal: RS002

• Max working length: 175cm• Min working length: 45cm• Weight of single: 154g• Weight of double: 194g

• Slings conform to EN354 EN566 and EN795-B• Delta maillon: 8mm EN362:04/Q & EN12275• Width: 36cm• Height: 45cm• Weight: 1.1kg

• Working Length: 170cm• Weight: 188g• Karabiner NOT included

Specifications:

Specifications:

Specifications:

The 5 Rung Etrier is made from our 18mm superweb. It comes with its own storage bag that can be connected to your harness when not in use.

This is not for use as PPE (Personal Protective Equipment) as there is no standard for this type of product. You must always use a separate sling or rope as your safety.

Our Single & Twin Foot Loops are fully adjustable using an alloy grip tight buckle, 25mm hard wearing polyester web and a reinforced foot loop.

Our technical rope gloves have been designed with the user in mind and not just as an abseiling glove. Normal abseiling gloves are thick, stiff, bulky and heavy. Our glove can be worn and used as a general purpose glove.

With its cut off thumb and first finger it can be used on jobs that require fingertip control.

Our harness lifting bridle has been designed for the use of lifting and lowering personnel from confined spaces when used in conjunction with an over the shoulder fall arrest harness.

The lifting bridle is made up of individual parts that comply to their own standards and the main body is made of formed 4mm stainless steel covered in a high grade tubular webbing.

Product code(s): Single Foot Loop: RS012 Twin Foot Loop: RS013

Product code(s): Etrier: RS014



• Material: Anodised high strength aircraft alloy • Minimum breaking load: 40kN• Weight: 219g• Hole: 20mm• Length: 160mm • Width: 100mm



Specifications: Medium Rigging Plate

Specifications: Small Rigging Plate Specifications: Large Rigging Plate

Product code(s): Small Rigging Plate: RS015 Medium Rigging Plate: RS016 Large Rigging Plate: RS017

• Medium• Large• XX Large

Sizes:

NewDesign!

74 75

Catalogue 2018/19BESPO

KE PROD

UC

TS

At SAR we are committed to making products that will fit all your needs, but if you need something to suit your specific needs we will happily design and manufacture products bespoke to you.

Bespoke products can be designed to include any customisation that you require. This can include your own company branding & colours.

If you would like a product designing for you, or would like an existing product personalised for you. Please contact us by emailing [email protected] or give us a call on 0161 621 0309

We are able to personalise a selection of our bags. These can be printed with your company’s logo or any other design you require. These designs can be printed in a wide choice of colours.

PERSONALISEDPRODUCTS

76 77

Catalogue 2018/19

T: +44 (0) 161 621 0309E: [email protected] W: www.sar-products.com Sarena House, Vulcan Street, Oldham, OL1 4LQ

Specialist Access & Rescue Products Ltd. - Terms and Conditions

1. (i) Goods are supplied subject to these terms and conditions which override any conditions of sale stipulated by the Buyer, unless specifically agreed in writing by Specialist Access & Rescue Products Ltd a company registered in England and Wales with company number 04881460 and whose registered office is at 18 Fernthorpe Avenue, Uppermill, Oldham OL3 6EA (“SAR”). Buyer means any person or entity who places an order for Goods with SAR. Specialist Access & Rescue Products Ltd.

(ii) Goods means those Goods supplied by SAR and ordered by the Buyer. No waiver or variation by SAR of any terms or of any breach of a contract committed by the Buyer shall be considered as a waiver or variation of any subsequent contract terms or any subsequent breach.(iii) Goods supplied for re-sale by SAR are only for sale by the Buyer from their own premises, unless otherwise agreed.(iv) SAR reserves the right to amend specifications and or prices as necessary and to decline to supply.(v) SAR expressly warrants that the Goods supplied by it comply with relevant specifications which accompany those Goods. No other term, condition, warranty or representation (whether express or implied by statute or usage) as to the nature, quality or fitness of the Goods to their conformity with any description or sample is given by SAR and the Buyer.(vi) Only a Director of SAR may make representations on behalf of SAR in respect of matters to which this contract relates, and such representations must be written to bind SAR. No other person is authorised by SAR to make representations on its behalf.

2. All prices quoted are exclusive of V.A.T. and other duties or taxes, unless otherwise specifically stated.

3. Orders will be despatched by SAR’s method and choice of carrier, unless agreed otherwise prior to despatch by SAR.

4. (i) Where Goods are supplied on a pro-forma basis those Goods will be dispatched only upon receipt of cleared funds. When paying by cheque, please allow 5 working days for clearance.(ii) SAR will not offer any settlement discount on pro-forma orders.(iii) SAR reserves the right at any time to review any credit arrangements which it makes with any Buyer and to cancel such credit facilities without notice.

5. (i) Orders are placed by the Buyer however they are only contractually binding from the time of acceptance by SAR (“Orders”). Cancellations of Orders can only be accepted with prior written agreement from SAR. (ii) Cancellations received after dispatch will incur a handling charge. Goods are to be returned at the Buyer’s expense and in the same condition as when despatched by SAR.

Good designis something to be proud of.

SAR Products - Terms & Conditions

(iii) Once accepted by SAR, an Order for any non-standard goods (meaning goods which have been manufactured to the Buyer’s own instructions and which would not otherwise be manufactured by or on behalf of SAR) is binding and cannot be cancelled.(iv) Standard Goods returned (which will be subject to a handling charge) must be current model and packaged in re-salably condition and received in the same condition as when despatched by SAR. (v) The Buyer must accept the Goods even if delivered late. Time of delivery is not of the essence of the contract. If the contract is one to be delivered in installments, the failure to deliver one installment does not entitle the Buyer to terminate the contract.(vi) If the Buyer fails to take delivery of the Goods in accordance with the terms of this contract, SAR shall be entitled to terminate the contract with immediate effect. On termination, SAR may, in its discretion, exercise any of the following rights, either alone or in combination:

(a) dispose of the goods as it thinks fit; (b) retain any deposit or part-payment made by the buyer; (c) recover damages from the Buyer in respect of any losses it suffers as a result of the Buyer’s failure to take delivery, including, but not limited to, the profit it would have made had the Buyer performed its obligations, the costs of storage and disposal of the goods. 6.(i) Delivery dates given by SAR are a genuine forecast in the light of current conditions but are given without legal commitment and SAR accepts no liability in the event that it is unable to meet those dates.(ii) If events beyond SAR’s reasonable control prevent SAR from delivering any Goods by the appropriate delivery date, such date shall be postponed for a reasonable period. Beyond such period SAR may without liability cancel this contract as regards such Goods.

7. SAR will endeavour to supply the exact quantities of Goods ordered in the specified number of consignments.

8. SAR reserves the right to cancel balance of Orders. The Buyer will pay for the actual quantities of Goods delivered even though part of the consignment may still be outstanding.

9. Non-receipt of goods for delivery in the U.K. must be notified in writing to SAR within 5 working days of receiving an invoice for such a delivery.

10. (i) Errors and shortages must be notified in writing to SAR within 5 working days of receipt of goods. (ii) SAR shall, as its option, replace, repair or refund the purchase price of any Goods proved to its reasonable satisfaction to have been delivered short or to be defective provided in each case:

(a) The Buyer as soon as reasonably practicable and in no event later than 5 working days of delivery informs SAR of the alleged short delivery or defect; and(b) The Buyer has paid for the Goods in full; and(c) No authorised repairs or alterations have been made to the defective Goods; and (d) The Goods have been maintained and used with reasonable care and in accordance with the directions or standard industry procedure and the Buyer provides full information and documentation to verify compliance with these conditions; and(e) If the Goods have been incorporated into other goods, the nature of those goods is stated; and (f ) The defect derives solely from the design, work or materials of SAR and was not caused wholly or partly as a result of delivery to the Buyers or any third party’s work, material or design. (iii) Consignments are packed to the highest standard. Damaged goods must be refused on delivery and the dispatch note marked ‘damaged in transit’. To ensure the dispatch of a replacement consignment the Buyer must advise SAR in writing of the damaged consignment within 5 working days of the damaged delivery.

11. (i) Ownership in the Goods remains with SAR until SAR has received cleared funds in full of the price of all the Goods supplied at any time by SAR to the Buyer as well as any other payment due under any other subsisting contract between SAR and the Buyer.(ii) The Buyer holds all goods owned by SAR as SAR’s fiduciary agent and bailee. (iii) All risk in the goods passes to the Buyer upon delivery. The Buyer must take all necessary protection of the goods including insurance until full payment is received.(iv) Until full payment as defined in clause 22 (i) has been received at SAR, the Buyer will hold the goods supplied on unpaid invoices in such a way that in the event of prior resale SAR shall be entitled to the proceeds of such a sale. (v) The Buyer shall if so requested by SAR store all goods not paid for in full so that they are clearly shown to be the property of SAR. The Buyer must maintain records of the location of the goods so they remain easily identifiable.(vi) Goods are supplied subject to the understanding that the credit Buyer authorises SAR to enter the Buyer’s premises in order to repossess goods for which full payment has not been received and all costs and expenses reasonably incurred by SAR shall be paid by the Buyer.

12. (i) SAR agrees to indemnify the Buyer:(a) against liability for personal injury or death directly attributable to the negligence of SAR; and (b) against physical damaged caused to the Buyer’s property directly arising from the negligence of SAR in connection with the supply of the Goods. (ii) SAR’s total indemnity to the Buyer under the indemnity contained above shall not exceed the price at which the Goods were sold to the Buyer for one or more related claims.(iii) Subject to the indemnity given above, SAR is not liable to the Buyer for any loss, expense or damage of any kind (direct, indirect, financial or consequential and whether arising from negligence or otherwise) arising from the supply, purported supply, failure to supply or from the Buyer’s use, possession or re-sale of the Goods. (iv) No officer or employee of SAR is liable to the Buyer in any circumstances for any loss, expense or damage of any kind (direct, indirect, financial or consequential and whether arising from negligence or otherwise) arising from any act or omission of this during the performance of this employment or other duties.

13. All copyright, patent, trade secret and other proprietary and intellectual property rights in the Goods and all information which SAR may provide to the Buyer or its agent shall (as between the parties) at all times remain vested in SAR and the Buyer does not acquire any intellectual property rights or licence relating to the Goods and may not copy or imitate the Goods.

14. In addition to any other right of termination, SAR may terminate this contract if:(i) the Buyer defaults in the payments on its due date of any sum under this contract or commits any continuing or serious breach of this contract and fails to remedy that breach (if capable of remedy) within 10 working days of SAR’s notice to do so; and(ii) any of the following events occurs: (i) distress or execution is levied against any of the Buyer’s assets or a receiver is appointed with respect to any of the Buyer’s assets; or(ii) a petition is presented for the winding up of or for an administration order to be made in relation to the Buyer or a resolution passed for the Buyer’s winding up; or(iii) the Buyer suspends or threatens to suspend payment of its debts or is deemed unable to pay its debts for the purposes of Section 123 Insolvency Act 1986.(iv) at any time SAR has reasonable grounds to believe that any of the events mentioned in (i) and (ii) above is likely to happen within a period of three months thereafter.

15. On termination of this contract for any reason:(i)SAR shall be discharged from any further liability to perform under the contract;(ii) the Buyer shall pay SAR on demand for all work performed by SAR for the Buyer prior to termination; and (iii) SAR is granted an irrevocable licence to enter the Buyer’s premises to recover any goods or materials which are SAR’s property.

16. The contract shall be governed by English law and be subject to the jurisdiction of the English courts.

17. (i) Demonstration and loan equipment is supplied solely on the understanding that the prospective customer takes full responsibility for its use.(ii) Supply of demonstration and load equipment can only be made if the prospective customer confirms in writing their full acceptance of responsibility.

18. Please note; climbing, mountaineering, caving, rescue, work at height and similar or associated activities can be hazardous and carry dangers which may lead to serious injury or even death. Goods to be used in these disciplines must only be used by competent and informed persons who understand and accept the risks involved. An apprenticeship in appropriate techniques and safety measures is the responsibility of the user, who assumes responsibility for all risks and damages which may arise from the use of such equipment.

19. It is the responsibility of the Buyer to ensure that all technical data and instruction provided with the product by SAR is supplied to the end user.

20. (i) Payment shall be due by the Buyer in full and cleared funds to SAR 30 days from the date of invoice.(ii) Every time a cheque, standing order or banker’s order fails to clear the Buyer’s bank on presentation we will separately surcharge the Buyer’s account.(iii) SAR understands and reserves the right to exercise our statutory right to claim interest and compensation for debt recovery costs under the Late Payment of Commercial Debts (Interest) Act 1998 (as amended) in the event that SAR is not paid according to agreed credit terms.(iv) If payment is received without instructions as to which invoice it should be matched against, it will be matched against the oldest invoice(s) on the account.(v) SAR expects customers to whom a credit note has been issued to claim the credit within 6 months. Where an account has been dormant for more than 6 months SAR will write off any credit notes and reserve the right to make an administrative charge in respect of any subsequent claim on them.(vi) Accounts that lie dormant for a minimum of 12 months will be closed. SAR reserves the right to make an administration charge for any subsequent reinstatement. 21. (i) In the event of any claim under warranty, guarantee or consumer protection law, SAR requires that Goods be returned to SAR for inspection.(ii) In order to minimise delay for the customer, SAR aims to inspect goods within 3 working days of receipt at SAR. (iii) Where goods are faulty and cannot, in SAR’s opinion, be repaired or replaced, a credit note will be issued to the original value of the faulty goods.(iv) SAR will not recognise as valid debit notes generated by the Buyer.

22. (i) SAR shall not be liable for any claims in respect of any Goods which have been misused, permitted or allowed to fall into a bad state of condition or repair and have not been maintained in accordance with the manufacturer’s instructions.

23. (i) Should any provision of this contract become illegal or void for any reason, the validity of the remaining provisions shall not be affected and the parties shall enter into negotiations in good faith to find a replacement for the provision which is of similar economic effect.

24. All notices, requests, claims, demands and other communications hereunder shall be in writing, Such notices shall be given: (i) By delivery in person(ii) By a nationally recognised next day courier service,(iii) By first class, registered or certified mail, postage prepaid,(iv) By facsimile or(v) By electronic mail to the address as either party may specify in writing. Notices so given shall be effective upon (i) receipt by the party to which notice is given, or (ii) on the fifth (5th) day following mailing, whichever occurs first.

25. If any provision or provisions of this Agreement shall be held to be invalid, illegal, unenforceable or in conflict with the law of any jurisdiction, the validity, legality and enforceability of the remaining provisions shall not in any way be affected or impaired thereby.

78 79

Specialist Access & Rescue Products Ltd.Sarena House,Vulcan Street,

Oldham,OL1 4LQ

United Kingdom

T: +44 (0)161 621 0309E: [email protected]: www.sar-products.com

Date post:	18-Jul-2020
Category:	Documents
Upload:	others
View:	3 times
Download:	1 times

Product Catalogue · Specalist Access & Rescue Products Ltd was founded in 2003 by Dave & Dorene...

Documents