Finishes for Wood / Wall / Metal Surfaces
PRODUCT BENEFITS
BEST IN CLASS
HIGH
MEDIUM
LOW
PRODUCT CODE 0064
Premium Satin EnamelAsian Paints Apcolite Premium Satin Enamel is a soft sheen enamel with the gentle, soothing sheen of a Satin fabric. It is just as durable as premium high gloss enamels and gives a long lasting washable finish.
**Actual coverage may vary from the quoted coverage due to factors such as method and condition of application and surface roughness and porosity.
* All Asian Paints products contain no added Lead, Mercury, Arsenic or Chromium
from April 2008.
On smooth masonry surface by brushing
1 COAT
240 - 280 sq.ft/ltr**
2 COATS
110 - 130 sq.ft/ltr**
WASHABILITY COLOURS AVAILABLE COVERAGE
AVAILABLE PACKS FINISH
PAINT APPLICATION PROCESSPRE PAINTING STEPS
STEP 6SANDING
STEP 4SANDING
STEP 3 KNIFING PASTE FILLER (METAL / WOOD)WALL PUTTY (MASONORY) PUTTY KNIFE
STEP 1 SANDING
STEP 7 FIRST COAT PREMIUM SATIN ENAMEL BRUSH / SPRAY / ROLLER
STEP 8 SECOND COAT PREMIUM SATIN ENAMEL BRUSH / SPRAY / ROLLER
BRUSH 30 - 40SPRAY 20 - 25
BRUSH 30 - 40SPRAY 20 - 25
BRUSH 4 - 10SPRAY 12 - 15
BRUSH 4 - 10SPRAY 12 - 15
0016
1354
BRUSH 35 - 40SPRAY 22 - 25
BRUSH 15 - 20SPRAY 35 - 400064
6 - 8 HRS
4 - 6 HRS
BASED ON REQUIREMENT
BASED ON REQUIREMENT
6 - 8 HRS
6 - 8 HRS
6 - 8 HRS
6 - 8 HRSBRUSH 35 - 40SPRAY 22 - 25
BRUSH 15 - 20SPRAY 35 - 400064
WATEROR
MTO
MTO*
MTO*
MTO*
MTO*
SAND THE SURFACE WITH EMERY PAPER 180 AND WIPE CLEAN
SAND THE SURFACE WITH EMERY PAPER 320 AND WIPE CLEAN
APPLICATION CODE DILUTION % APPLICATION VISCOSITY1
RECOATING PERIOD
THINNERPLASTER New masonary surfaces must be allowed to cure completely. It is recommended to allow 28 days as the curing time for new masonary surfaces.
CLEANING Surface should be free from any loose paint, dust or grease. Growths of fungus, algae or moss should be removed by wire brushing and water. In case of areas having excessive dampness use Asian Paints DampBlock to limit further dampness. When the underlying surface exhibits chalkiness, in spite of thorough surface cleaning, use Asian Paints Exterior Sealer.
FILLING FOR CRACKS For filling masonary upto 3mm use Asian Paints Crack Seal.
FILLING FOR HOLES & DENTS In case of dents and holes use Asian Paints Acrylic Wall Putty or white cement and fine sand in the ratio 1:3
Premium Satin Enamel should not be applied on surfaces / substrates that are subjected to continuous seepage or dampness.
Refer to sheen levels in technical detailsShelf life: 3 years from date of manufacture in original tightlyclosed containers away from direct sunlight and excessiveheat.
Soft Sheen Finish Premium Satin Enamel gives you a rich, sophisticated look that makes your house look a cut above the rest
Stain GuardSuperior washability & stain resistance helps you remove stains easily.
Anti-fungal Shield The imported biopack in Premium Satin Enamel protects surfaces from black spots and retains the beauty of your house!
High CoveragePremium Satin Enamel covers upto 25% more area than regular enamels – which means more savings for you!
*Currently available in 1788 shades as per the Colourworld Fandeck
PRODUCT FEATURES
HOW TO APPLY
SOLVENT BASED
1. As measured through a Ford cup.2. Recoat period is quoted for 25°C and 50% Relative Humidity, these may vary under different conditions.* Mineral Turpentine Oil3. Ensure that the metal substrates are free from oil, grease and rust before paint application.
MATT HIGH GLOSSLOW SHEEN HIGH SHEEN
STEP 2 METAL PRIMER (METAL) / DECOPRIME ST (MASONORY) / WOOD PRIMER (WOOD)
STEP 5 METAL PRIMER (METAL) / DECOPRIME ST (MASONORY) / WOOD PRIMER (WOOD)
1788*
500 ml 1 ltr 4 ltr 10 ltr 20 ltr
SAND THE SURFACE WITH EMERY PAPER 180 AND WIPE CLEAN
000503590007
000503590007
SILKY SMOOTH
Finishes for Wood / Wall / Metal Surfaces
ADDITIONAL INFORMATION
Browse through Asian Paints colour tools to help you find the right colour combination
COLOUR SPECTRA FAN DECK*
POST PAINTING CARE
For the best performance of the paint, ensure proper washing and cleaning of all algal and fungal growth, if any, at regular intervals of six months.
TECHNICAL DETAILS
a. Drying time: Surface dry time 2.5 hrsb. Sheen levels: 15-35 at 60 deg GHc. Flash point 1s101/1987 Part 1 Sec 6 : 35 Deg C (95 Deg F) d. Stability of thinned paint: To be used within 24 hours
PRECAUTIONS
Do not apply when ambient temperature is less than 10°C or if the temperature might drop to this level within 4 hrs of application.Do not over-thin or over-extend the brush.Tint using Asian Paints machine colourants onlyStir well and strain before use.Tinted paints need thorough shaking immediately after tinter addition as well as before use.
>
>>
>>
SAFETY FEATURES
Kindly refer to the MSDS for Asian Paints Premium Satin Enamel which gives detailed information on safety measures while handling the paint. Store the container with the lid tightly closed in an upright position, in a cool, dry placeKeep out of reach of children and away from food, drinkMay be harmful if swallowed. In case of ingestion seek immediate medical attention.Wear eye protection during application. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.In case of skin contact immediately wash skin with soap and plenty of water. Get medical attention if irritation develops or persists.Do not breathe vapour or spray.It is recommended to wear suitable nose pad during sanding and surface preparation to avoid dust inhalationDo not pour leftover paint down the drain or in water courses.In the event of spills, contain spillage using sand or earth.Safety Data Sheet available for professional user on request.No added Lead, Mercury or Chromium compounds
>
>
>>>
>
>
>>
>>
HOW TO CHOOSE COLOURS
Versio
n No
. VN
01/07/2012
Version No. VN27/02/2013. Please note that this datasheet supersedes all previous versions For Feedback/complaints, write to Marketing Manager ServicesAsian Paints Limited, 6A, Shantinagar, Santacruz(E), Mumbai 400 055, India
*These shades are for reference only. Please refer to the Colour Spectra or Colour Palette for correct shade reference
ENAMEL SHADE CARD
Finishes for Wood / Wall / Metal Surfaces
PRODUCT BENEFITS
BEST IN CLASS
HIGH
MEDIUM
LOW
PRODUCT CODE 0026 / 0001
Premium Gloss EnamelAsian Paints Apcolite Premium Gloss Enamel imparts a shiny new look to surfaces painted with this finish. It forms a tough film that is highly resistant to household stains. It thereby serves as a protective armour around the painted surface.
**Actual coverage may vary from the quoted coverage due to factors such as method and condition of application and surface roughness and porosity.
* All Asian Paints products contain no added Lead, Mercury, Arsenic or Chromium
from April 2008.
On smooth masonry surface by brushing
1 COAT
185 - 225 sq.ft/ltr**
2 COATS
95 - 110 sq.ft/ltr**
WASHABILITY COLOURS AVAILABLE COVERAGE
AVAILABLE PACKS FINISH
PAINT APPLICATION PROCESSPRE PAINTING STEPS
STEP 7 FIRST COAT PREMIUM GLOSS ENAMEL BRUSH / ROLLER / SPRAY
STEP 8 SECOND COAT PREMIUM GLOSS ENAMEL BRUSH / ROLLER / SPRAY
BRUSH 55 - 60SPRAY 22 - 25
BRUSH 8 - 10SPRAY 15 - 20
0001 0026
6 - 8 HRS
6 - 8 HRSBRUSH 55 - 60SPRAY 22 - 25
BRUSH 8 - 10SPRAY 15 - 20
0001 0026
MTO*
MTO*
APPLICATION CODE DILUTION % APPLICATION VISCOSITY1
RECOATING PERIOD
THINNERPLASTER New masonary surfaces must be allowed to cure completely. It is recommended to allow 28 days as the curing time for new masonary surfaces.
CLEANING Surface should be free from any loose paint, dust or grease. Growths of fungus, algae or moss should be removed by wire brushing and water. In case of areas having excessive dampness use Asian Paints DampBlock to limit further dampness. When the underlying surface exhibits chalkiness, in spite of thorough surface cleaning, use Asian Paints Exterior Sealer.
FILLING FOR CRACKS For filling masonary upto 3mm use Asian Paints Crack Seal.
FILLING FOR HOLES & DENTS In case of dents and holes use Asian Paints Acrylic Wall Putty or white cement and fine sand in the ratio 1:3
Premium Gloss Enamel should not be applied on surfaces / substrates that are subjected to continuous seepage or dampness.
Refer to sheen levels in technical detailsAlso available in 50 ml,100 ml, 200 ml and 500 ml
Shelf life: 3 years from date of manufacture in original tightlyclosed containers away from direct sunlight and excessiveheat.
SILKY SMOOTH
High Gloss Finish Premium Gloss Enamel gives a mirror like gloss for your doors, windows, grills & gates
Tough and DurableThe oil based film of Premium Gloss Enamel makes it one of the toughest & most durable paints which forms a protective armour around surfaces
Stain Gaurd Premium Gloss Enamel is a highly washable paint, thus you can wipe off most common household stains easily
1737**Currently available in 1737 shades as per the Colourworld Fandeck
PRODUCT FEATURES
HOW TO APPLY
SOLVENT BASED
1. As measured through a Ford cup.2. Recoat period is quoted for 25°C and 50% Relative Humidity, these may vary under different conditions.* Mineral Turpentine Oil3. Ensure that the metal substrates are free from oil, grease and rust before paint application.
MATT HIGH GLOSSLOW SHEEN HIGH SHEEN
STEP 6SANDING
STEP 4SANDING
STEP 3 KNIFING PASTE FILLER (METAL / WOOD)WALL PUTTY (MASONORY) PUTTY KNIFE
STEP 1 SANDING
BRUSH 30 - 40SPRAY 20 - 25
BRUSH 30 - 40SPRAY 20 - 25
BRUSH 4 - 10SPRAY 12 - 15
BRUSH 4 - 10SPRAY 12 - 15
0016
1354
6 - 8 HRS
4 - 6 HRS
BASED ON REQUIREMENT
BASED ON REQUIREMENT
6 - 8 HRS
6 - 8 HRS
WATEROR
MTO
MTO*
MTO*
SAND THE SURFACE WITH EMERY PAPER 180 AND WIPE CLEAN
SAND THE SURFACE WITH EMERY PAPER 320 AND WIPE CLEAN
CODE APPLICATION VISCOSITY1
RECOATING PERIOD
THINNER
STEP 2 METAL PRIMER (METAL) / DECOPRIME ST (MASONORY) / WOOD PRIMER (WOOD)
STEP 5 METAL PRIMER (METAL) / DECOPRIME ST (MASONORY) / WOOD PRIMER (WOOD)
SAND THE SURFACE WITH EMERY PAPER 180 AND WIPE CLEAN
000503590007
000503590007
20 ltr10 ltr4 ltr1 ltr
Finishes for Wood / Wall / Metal Surfaces
ADDITIONAL INFORMATION
Browse through Asian Paints colour tools to help you find the right colour combination
COLOUR SPECTRA FAN DECK*
POST PAINTING CARE
For the best performance of the paint, ensure proper washing and cleaning of all algal and fungal growth, if any, at regular intervals of six months.
TECHNICAL DETAILS
a. Drying time: Surface dry time 3 hrsb. Gloss levels: 75 - 85 on tin plate at 20 Deg Gloss Head c. 1s101/1987 Part 1 Sec 6 35 Deg C (95 Deg F) d. Stability of thinned paint: To be used within 24 hours
PRECAUTIONS
Do not apply when ambient temperature is less than 10°C or if the temperature might drop to this level within 4 hrs of application.Do not over-thin or over-extend the brush.Tint using Asian Paints machine colourants onlyStir well and strain before use.Tinted paints need thorough shaking immediately after tinter addition as well as before use.
>
>>
>>
SAFETY FEATURES
Kindly refer to the MSDS for Asian Paints Premium Gloss Enamel which gives detailed information on safety measures while handling the paint. Store the container with the lid tightly closed in an upright position, in a cool, dry placeKeep out of reach of children and away from food, drinkMay be harmful if swallowed. In case of ingestion seek immediate medical attention.Wear eye protection during application. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.In case of skin contact immediately wash skin with soap and plenty of water. Get medical attention if irritation develops or persists.Do not breathe vapour or spray.It is recommended to wear suitable nose pad during sanding and surface preparation to avoid dust inhalationDo not pour leftover paint down the drain or in water courses.In the event of spills, contain spillage using sand or earth.Safety Data Sheet available for professional user on request.No added Lead, Mercury or Chromium compounds
>
>
>>>
>
>
>>
>>
HOW TO CHOOSE COLOURS
Versio
n No
. VN
01/07/2012
Version No. VN27/02/2013. Please note that this datasheet supersedes all previous versions For Feedback/complaints, write to Marketing Manager ServicesAsian Paints Limited, 6A, Shantinagar, Santacruz(E), Mumbai 400 055, India
*These shades are for reference only. Please refer to the Colour Spectra or Colour Palette for correct shade reference
ENAMEL SHADE CARD
Finishes for Wood / Wall / Metal Surfaces
PRODUCT BENEFITS
BEST IN CLASS
HIGH
MEDIUM
LOW
PRODUCT CODE 0074
Premium Semi Gloss EnamelAsian Paints Premium Semi Gloss Enamel provides semi glossy finish and good resistance to stains. It has low odour and excellent non-yellowing properties. It does not yellow with passage of time, unlike alkyd enamels, giving your doors that ‘shiny-as-new’ look for a long time.
**Actual coverage may vary from the quoted coverage due to factors such as method and condition of application and surface roughness and porosity.
* All Asian Paints products contain no added Lead, Mercury, Arsenic or Chromium
from April 2008.
On smooth masonry surface by brushing
1 COAT
120 - 150 sq.ft/ltr**
2 COATS
80 - 100 sq.ft/ltr**
WASHABILITY COLOURS AVAILABLE COVERAGE
AVAILABLE PACKS FINISH
1 ltr 4 ltr 20 ltr
PAINT APPLICATION PROCESSPRE PAINTING STEPS
STEP 6SANDING
STEP 4SANDING
STEP 1 SANDING
STEP 7 FIRST COAT PREMIUM SEMI GLOSS ENAMEL BRUSH / ROLLER / SPRAY STEP 8 SECOND COAT PREMIUM SEMI GLOSS ENAMEL BRUSH / ROLLER / SPRAY
13540016
10170005
10170005
4 - 6 HRS6 - 8 HRS
4 - 6 HRS
6 - 8 HRS
4 - 6 HRS00074
WATER ORMTO*
WATER ORMTO*
WATER ORMTO*
WATER
SAND THE SURFACE WITH EMERY PAPER 180 FOLLOWED BY EMERY PAPER 320 AND WIPE CLEAN
APPLICATION CODE DILUTION % APPLICATION VISCOSITY1
RECOATING PERIOD
THINNERPLASTER New masonary surfaces must be allowed to cure completely. It is recommended to allow 28 days as the curing time for new masonary surfaces.
CLEANING Surface should be free from any loose paint, dust or grease. Growths of fungus, algae or moss should be removed by wire brushing and water. In case of areas having excessive dampness use Asian Paints DampBlock to limit further dampness. When the underlying surface exhibits chalkiness, in spite of thorough surface cleaning, use Asian Paints Exterior Sealer.
FILLING FOR CRACKS For filling masonary upto 3mm use Asian Paints Crack Seal.
FILLING FOR HOLES & DENTS In case of dents and holes use Asian Paints Acrylic Wall Putty or white cement and fine sand in the ratio 1:3
Premium Semi Gloss Enamel should not be applied on surfaces / substrates that are subjected to continuous seepage or dampness.
Refer to sheen levels in technical detailsShelf life: 3 years from date of manufacture in original tightlyclosed containers away from direct sunlight and excessiveheat.
SILKY SMOOTH
Highly WashablePrevents stains like pickles, crayons & sauces from spoiling the look of your house!
Non YellowingRemains white even after a few years, whereas regular enamels start becoming yellow and looking old!
Anti FungalResists fungal attacks that result in black spots on the surfaces of doors, walls & cupboardsenamels start becoming yellow and looking old!
Odour Free Premium Semi Gloss Enamel does not have any smell like a regular enamel paint - you won’t even realise that your house is being painted!
Quick DryingDries within 30 minutes & can be recoated in 4 hours - so you can finish your paint job in just one day - unlike regular enamels which require 2 days!
1530**Currently available in 1530 shades as per the Colourworld Fandeck
PRODUCT FEATURES
HOW TO APPLY
WATER BASED
1. As measured through a Ford cup.2. Recoat period is quoted for 25°C and 50% Relative Humidity, these may vary under different conditions.* Mineral Turpentine Oil
MATT HIGH GLOSSLOW SHEEN HIGH SHEEN
STEP 2 PREMIUM AQUA PRIMER /METAL PRIMERBRUSH / SPRAY
STEP 5 PREMIUM AQUA PRIMER /METAL PRIMERBRUSH / SPRAY
SAND THE SURFACE WITH EMERY PAPER 180 FOLLOWED BY EMERY PAPER 320 AND WIPE CLEAN
LIGHT SANDING WITH EMERY PAPER 320 OR 400 AND WIPE CLEAN
100% WATER ORBRUSH 8 - 10SPRAY 12 - 15
BASED ONREQUIREMENT
BASED ONREQUIREMENT
100% WATER ORBRUSH 8 - 10SPRAY 12 - 15
BRUSH 15 - 25SPRAY 25 - 35
BRUSH 30 - 35SPRAY 20 - 25
13 -15 ORBRUSH 30 - 40SPRAY 20 - 25
4 - 6 HRS
6 - 8 HRS
13 -15 ORBRUSH 30 - 40SPRAY 20 - 25
STEP 3 ACRYLIC WALL PUTTY (CEMENT) /KNIFING PASTE FILLER (WOOD / METAL)PUTTY KNIFE
4 - 6 HRS00074 WATER BRUSH 15 - 25SPRAY 25 - 35
BRUSH 30 - 35SPRAY 20 - 25
Finishes for Wood / Wall / Metal Surfaces
ADDITIONAL INFORMATION
Browse through Asian Paints colour tools to help you find the right colour combination
COLOUR SPECTRA FAN DECK*
POST PAINTING CARE
For the best performance of the paint, ensure proper washing and cleaning of fungal growth, if any, at regular intervals of six months.
TECHNICAL DETAILS
a. Drying time: Surface dry time 30 minb. Sheen levels: 50 - 60 at 60 deg GHc. Flash point IS101/1987 Part 1, Sec 6: NAd. Stability of thinned paint: To be used within 24 hours
PRECAUTIONS
Do not apply when ambient temperature is less than 10°C or if the temperature might drop to this level within 4 hrs of application.Do not over-thin or over-extend the brush.Tint using Asian Paints machine colourants onlyStir well and strain before use.Tinted paints need thorough shaking immediately after tinter addition as well as before use.
>
>>
>>
SAFETY FEATURES
Kindly refer to the MSDS for Asian Paints Semi Gloss Enamel which gives detailed information on safety measures while handling the paint. Store the container with the lid tightly closed in an upright position, in a cool, dry placeKeep out of reach of children and away from food, drinkMay be harmful if swallowed. In case of ingestion seek immediate medical attention.Wear eye protection during application. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.In case of skin contact immediately wash skin with soap and plenty of water. Get medical attention if irritation develops or persists.Do not breathe vapour or spray.It is recommended to wear suitable nose pad during sanding and surface preparation to avoid dust inhalationDo not pour leftover paint down the drain or in water courses.In the event of spills, contain spillage using sand or earth.Safety Data Sheet available for professional user on request.No added Lead, Mercury or Chromium compounds
>
>
>>>
>
>
>>
>>
HOW TO CHOOSE COLOURS
Versio
n No
. VN
01/07/2012
Version No. VN27/02/2013. Please note that this datasheet supersedes all previous versions For Feedback/complaints, write to Marketing Manager ServicesAsian Paints Limited, 6A, Shantinagar, Santacruz(E), Mumbai 400 055, India
*These shades are for reference only. Please refer to the Colour Spectra or Colour Palette for correct shade reference
ENAMEL SHADE CARD