ETUROPA

OOL

PRODUCT GUIDE 2017

• MILLING• THREADING• HOLEMAKING• INDEXABLE• TOOLHOLDING

SOLID CARBIDE DRILLING TOOLS

PULSARCARBIDE DRILL

ø3mm - 12mm, STUB Solid CarbideTiAlN Coated

High Hardened Steels HRC 50 to HRC 70

• Powerful drilling special geometry reduces cutting load.• Excellent chip evacuation and surface finish of work materials.• Extremely shortened working time & cost saving than EDM machining.

GOLDCARBIDE DRILLS

ø3mm - 20mm, STUB ø3mm - 20mm, 3xDø1mm - 20mm, 5xD

Solid CarbideTiAlN Coated

General PurposeHRC 30 to HRC 50

• Self centering drill point for precise drilling.• Excellent chip removal, high rigidity and excellent performance under

high speed and feed.• High accuracy drill diameter reaming not required.

GOLDCARBIDE DRILLS

ø3mm - 20mm, 3xD ø1mm - 20mm, 5xDø3mm - 12mm, 8xD

Solid Carbidewith Through Coolant

TiAlN Coated

General PurposeHRC 30 to HRC 50

• Self centering drill point for precise drilling.• Excellent chip removal, high rigidity and excellent performance under

high speed and feed.• High accuracy drill diameter reaming not required.

INOXCARBIDE DRILLS

ø3mm - 20mm, 3xD ø1mm - 20mm, 5xDø3mm - 14mm, 8xD

Solid Carbidewith Through Coolant

TiAlN Coated

Stainless Steels, Nickel Alloys and

Titanium Alloys up to HRC 35

• Special flute geometry suitable for stainless steels.• Coating gives excellent chip evacuation, good work piece surface

finish and longer tool life.• Good self centering point and makes good chip curling.

ALU-XPCARBIDE DRILLS

ø3mm - 20mm, 3xD ø3mm - 20mm, 5xDø3mm - 14mm, 8xD

Solid Carbidewith Through Coolant

Aluminium &Aluminium Alloys

• Bright polished flutes prevents built-up edge and gives good chip evacuation.

CFRPCARBIDE DRILL

ø2.5mm - 12mm Solid CarbideDiamond Coated

CFRPCarbon Fibre

Reinforced Plastic

• Special drill point enhances quality of holes and minimises burrs and delamination.

GOLDCARBIDE DRILLS

MQL TYPE

ø3mm - 14mm, 10xD ø3mm - 12mm, 15xDø3mm - 12mm, 20xDø3mm - 10mm, 25xDø3mm - 8mm, 30xD

Solid Carbidewith Through Coolant

TiAlN Coated

Carbon SteelsAlloy Steels

• For deep hole drilling.• Special flute design and surface treatment for excellent chip

evacuation.

GENERALCARBIDE DRILLS

ø2mm - 13mm, STUB ø2mm - 12mm, JOBBER Solid Carbide General Purpose • Long tool life, suitable for drilling soft, thin and general work materials.

NC-SPOTTINGCARBIDE DRILLS

ø6mm - 20mm x 90ºø6mm - 20mm x 120º Solid Carbide General Purpose • For centering and chamfering work materials.

CARBIDECENTRE DRILLS

ø0.5mm - 10mm Solid Carbide General Purpose • For making internal centres on work materials.• Excellent performance under general work conditions.

PRODUCT SIZE RANGE TOOLMATERIAL

WORKMATERIAL CHARACTERISTICS

DRILLING TOOLS

ETUROPA

OOL

ETUROPA

OOL

ETUROPA

OOL

ETUROPA

OOL

ETUROPA

OOL

ETUROPA

OOL

ETUROPA

OOL

ETUROPA

OOL

ETUROPA

OOL

ETUROPA

OOL

ETUROPA

OOL Tel: +44 (0) 24 7664 1282 Fax: +44 (0) 24 7664 1390 eMail: sales@europatool.co.uk http://www.europatool.co.uk

DRILLING TOOLS

HSS DRILLING TOOLS

SABRE DRILLS ø3mm - 13mm, STUB HSS-PM TiAlN Coated Multi Purpose

• Special point geometry for high performance.• Using HSS-PM prolongs tool life and improves performance compared

to HSS tools.

HPD-SUS DRILLS ø2mm - 13mm, STUB ø2mm - 20mm, JOBBER

HSS-EX Superior

TiN Coated

Stainless Steel Mild Steels, Copper & Aluminium Alloys

• High helix and sharp cutting edge avoid built-up edge gives high performance drilling.

• HSS-EX material and coating give higher speed and feed with longer tool life.

• Also gives high quality work piece surface finish.

HPD DRILLS ø2mm - 32mm, JOBBERHSSCo

SuperiorTiN Coated

General Steels

• Geometry gives good chip removal,self centering point and reducing thrust for improved accuracy.

• Premium cobalt with superior tin coating for higher speed & feed, increased tool life.

• Also gives high quality work piece surface finish.

GOLDEX DRILLS ø2mm - 32mm, JOBBER DIN338HSS & HSS-E HSS-E DH100 Worm Pattern

Steels, Cast Steels Alloyed and

Non-Alloyed Steels Grey Cast Iron etc

• Competive price but high performance general purpose drills.• Good quality base material and tin coated for excellent tool life to drill

cost ratio.

WORM PATTERNDRILLS

(Parabolic Flute)

ø2mm x 10.5mm DIN1869/1ø3mm x 10.2mm DIN1869/2 ø4mm x 10mm DIN1869/3

HSS-ETiAlN Coated

Carbon Steels, Alloy Steels, Tool Steels,

Hardened Steels, & Cast Iron

• Designed for drilling of deep holes and particular suitable to drill deep holes without pecking cycle.

STRAIGHT SHANK DRILLS

ø1mm - 31mm, STUB DIN1897 ø1mm - 20mm, JOBBER DIN338

ø2mm - 12mm, LONG DIN340

HSS & HSS-E HSS & HSS-E

HSS-E

General Purpose Soft and Tough

Materials

• All CNC ground drills excellent performance with various working conditions.

• Two-tone drills available above 5.0mm.

TAPER SHANK DRILLS ø13mm - 60mm DIN345 HSS General Purpose• All CNC ground drills excellent performance with various working

conditions.• Mainly for drilling of large diameter holes.

NC-SPOTTING DRILLSø3mm - 20mm x 90º

ø3mm - 20mm x 120º HSSCo General Purpose • For centering and chamfering work materials.

CENTRE DRILLSø0.5mm - 10mm

BS1 TO BS7HSS-EX

HSS General Purpose • For making internal centers on work materials.• Excellent performance under general work conditions.

PRODUCT SIZE RANGE TOOLMATERIAL

WORKMATERIAL CHARACTERISTICS

SPADE DRILLING TOOLS

4F-POINT SPADE INSERT

ø9.5mm - 47.63mm T15 TiAlNP40 TiAlN General Purpose

• New point geometry gives improve stability hole straightness and self centering point.

• Insert system to give interchangeable insert for drilling body to reduce tooling costs.

SPADE INSERT

ø18mm - 114.30mmø9.5mm - 65.09mm

ø9.5mm - 35mmø9.5mm - 35mmø9.5mm - 35mm

ø9.5mm - 47.63mm

M4 TiN / TiAlN T15 TiN / TiAlN M48 TiN / TiAlN K10 TiN / TiAlN K20 TiN / TiAlN P40 TiN / TiAlN

General Purpose • Insert system to give interchangeable insert for drilling body to reduce tooling costs.

FLAT BOTTOM SPADE INSERT

ø9.5mm - 35mm T15 TiAlN General Purpose• Insert system to give interchangeable insert for drilling body to reduce

tooling cost.• With flat bottom geometry for blind hole.

PRODUCT SIZE RANGE TOOLMATERIAL

WORKMATERIAL CHARACTERISTICS

ETUROPA

OOL

ETUROPA

OOL

ETUROPA

OOL

ETUROPA

OOL Tel: +44 (0) 24 7664 1282 Fax: +44 (0) 24 7664 1390 eMail: sales@europatool.co.uk http://www.europatool.co.uk

THREADING TOOLS

CARBIDE TAPSM2 - M20 Carbide

Cast Iron andHigh Silicon Aluminum

• For tapping of through or blind holes, longer tool life and higher precision than HSS taps.

CARBIDE THREAD MILLS

M1.6 - M20No.1 - 1.1/8” UNC 1/4 - 1.1/2” UNF1/8 - 1.1/2” NPT1/16 - 1” BSP

CarbideTiAlN Coated

with and without through Coolant

Hole

Various Materials • For blind holes and through holes with one single tool.• Higher cutting speed and feed than taps.

UNIMASTER UNIVERSAL TAPS

M3-M20 Metric Coarse & Fine No.4 - 1” UNC & UNF

HSS-EBright, Blue, TiN

(Black Ring)HSS-PM Blue(Green Ring)

Multi Purpose• Specially designed and patent geometry to prevent oversize threads

and reducing gauging problems and effective on a very wide range of work materials.

APPLICATION TAPS SPIRAL POINT (DIN)

M2- M30 Metric Coarse & Fine No.4 - 1” UNC & UNF

1/8” - 1” BSP

HSS-EBright

(Colour Ring)All Materials

• Suitable for tapping of through holes in various materials.• Taps are identified with a colour ring to signify suitable tapping material

and easy quick identification.• Made from HSSE material and with treated surface to suit the required

tapping material to give long tool life and good work piece surface finish.

APPLICATION TAPS SPIRAL FLUTE (DIN)

M2- M30 Metric Coarse & Fine No.4 - 1” UNC & UNF

1/8” - 1” BSP

HSS-EBright

(Colour Ring)All Materials

• Suitable for tapping of blind holes in various materials.• Taps are identified with a colour ring to signify suitable tapping material

and easy quick identification.• Made from HSSE material and with treated surface to suit the required

tapping material to give long tool life and good work piece surface finish.

COLD FORMING TAPS (FLUTELESS

OR ROLL TAPS)

M2 - M20 Metric Coarse

HSS-ETiN Coated

HSS-ETiAlN Coated

Cast Aluminum, Brass, Copper,

Aluminum &Steels < 700N/mm2

• Suitable for threading ductile materials.

NUT TAPSM4-M30 Metric Coarse HSSE-Bright

(Yellow Ring) General Purpose • Taps for the high production of nuts.

HAND TAPS (ISO)M1- M30 Metric Coarse & Fine

No.1 - 1” UNC & UNF1/8” - 1” BSPF / BSPT

HSS General Purpose• Designed for hand and machine tapping a variety of materials and

applications.• All taps bright finish ground precision threads.

SPIRAL POINT SPIRAL FLUTE (ISO)

M1.6- M30 Metric Coarse & Fine No.1 - 1” UNC & UNF1/8” - 1” BSPF / BSPT

HSS General Purpose

• Designed for machining tapping a variety of materials and applications.• All taps are blue finish (steam tempered).• Blue wizard - spiral point.• Blue merlin - spiral flute.

CIRCULAR DIES HEXAGON DIENUTS

M3- M30 Metric Coarse & Fine No.10 - 1” UNC & UNF /8” - 1” BSPF / BSPT

HSS General Purpose

• Designed for producing threads on external diameters by hand driven stock or by machine.

• Dienuts for reclaiming damaged external threads.• Diestocks also supplied to suit all sizes.

PRODUCT SIZE RANGE TOOLMATERIAL

WORKMATERIAL CHARACTERISTICS

ETUROPA

OOL

ETUROPA

OOL

ETUROPA

OOL

ETUROPA

OOL

ETUROPA

OOL

ETUROPA

OOL

ETUROPA

OOL

ETUROPA

OOL Tel: +44 (0) 24 7664 1282 Fax: +44 (0) 24 7664 1390 eMail: sales@europatool.co.uk http://www.europatool.co.uk

MILLING TOOLS

ETUROPA

OOL Tel: +44 (0) 24 7664 1282 Fax: +44 (0) 24 7664 1390 eMail: sales@europatool.co.uk http://www.europatool.co.uk

SOLID CARBIDE MILLING TOOLS

MASTERMILL VXEND MILLS

ø3mm - 25mmMicro Grain

Solid CarbideVX Coated

Steel <HRc 40, Stainless, Titanium,

Nickel alloys

• Excellent performance in aerospace materials.• Multi flute tools for trochoidal milling.• Variable helix tools for vibration reasistance and long tool life.• Highly suitable for High speed cutting (HSC)

PULSAR BLUEEND MILLS

ø0.1mm - 25mmNano Grain

Solid Carbide Blue Coated

High Hardened Steels HRc 45 - HRc 70

• High speed cutting and dry cutting conditions.• High precision milling, long tool life and excellent workpiece finish.

PULSAREND MILLS

ø0.4mm - 25mmNano Grain

Solid CarbideTiAlN Coated

High Hardened Steels HRC 45 - HRC 65

Cast Iron

• High speed cutting and dry cutting conditions.• High performance to tool cost ratio very high.

PULSAR DMXEND MILLS

ø0.1mm - 25mmMicro Grain

Solid CarbideDMX Coated

Pre-Hardened Steels, General Steels

<HRC55Cast Iron

• Suitable for a large range of materials, specifically for increasing tool life when machining pre-hardened materials, low hardness materials and cast iron.

• High speed cutting (HSC), dry and wet both recommended.

HX2 & ET1END MILLS

ø3mm - 25mmMicro Grain

Solid CarbideTiAlN Coated

Stainless Steels, Titanium &

Low Hardness Materials

• Special patent geometry to reduce cutting vibration and noise. • Excellent workpiece finish under high speed and deep cut.• High performance for difficult-to-cut materials, and good workpiece

surface finish.

HX2S ROUGHINGEND MILLS ø6mm - 25mm

Micro GrainSolid CarbideHX Coated

Cast Iron, Carbon Steels, Alloy Steels,

Tool Steels,Pre-Hardened Steels

• Unique flute design gives excellent chip evacuation and reduction to vibration.

• Optimal roughing tooth profile to reduce cutting forces.• Special tool geometry for high feed rate and heavy cutting.• Strong end tooth design for plunge and pocket milling.• Custom engineered coating to allow long tool life.

ALU-XPEND MILLS

ø2mm - 20mmMicro Grain

Solid CarbidePolished Flutes

Aluminum and Non-Ferrous Materials

• Specialy designed geometry with polished flutes to give superior chip removal and workpiece surface finish.

CFRP & GRAPHITEEND MILLS

ø2mm - 12mm Micro Grain

Solid CarbideDiamond Coated

Carbon Fibre, Graphite &

Non-Ferrous Materials

• Maximum tool life with tool high hardeness and superior finish.• Produced from new ultra fine carbide with diamond coating to give

excellent resistance to abrasion of composite materials - CFRP, GFRP• Geometry designed to reduce delamination and burrs.

CFRP ROUTERS

ø6mm - 12mmMicro Grain

Solid CarbideDiamond Coated

Carbon Fibre, GFRP &

Non-Ferrous Materials

• Produced from new ultra fine carbide with diamond coating to give excellent resistance to abrasion of composite materials - CFRP, GFRP

• Geometry designed to reduce delamination and burrs.

K30 CARBIDEEND MILLS

ø1mm - 25mm

Micro GrainSolid Carbide

Unoated & TiAlN Coated

General Purpose up to HRC 55

• All applications most materials.• High quality carbide and tool performance in ration to tool cost.• Good regrindability.

PRODUCT SIZE RANGE TOOLMATERIAL

WORKMATERIAL CHARACTERISTICS

ETUROPA

OOL

ETUROPA

OOL

ETUROPA

OOL

ETUROPA

OOL

ETUROPA

OOL

ETUROPA

OOL

ETUROPA

OOL

ETUROPA

OOL

ETUROPA

OOL

ETUROPA

OOL

MILLING TOOLS

ETUROPA

OOL Tel: +44 (0) 24 7664 1282 Fax: +44 (0) 24 7664 1390 eMail: sales@europatool.co.uk http://www.europatool.co.uk

INDEXABLE INSERT MILLING TOOLS

MASTERMILL IDXCOPY MILLING

ø8mm - 32mm

Carbide Insert Coated

HSS & Carbide Holders

Hardened Steels & General Purpose

Materials

• Two types of inserts available - TiAlN coated for general materials up to HRC 50.

• Special coating for hardened steels up to HRC 65 specialized geome-try and coating for excellent performance.

MASTERMILL IDXGENERAL MILLING

ø16mm - 32mmEnd Mills

ø40mm - 80mmFace Mills

Carbide Insert Coated

HSS Holders

Alloy Steels, Stainless Steel,

Cast Iron

• Nano technology and multilayer PVD coating achieves the optimal performance.

PRODUCT SIZE RANGE TOOLMATERIAL

WORKMATERIAL CHARACTERISTICS

HSS MILLING TOOLS

SABRE ROUGHING(FINE PITCH)

ø6mm - 25mm HSS-PM Sabre Coated

Stainless Steels Nickel Alloys Alloy Steels

• Using HSS PM sabre coated roughers gives prolonged tool life and improves performanc due to increase tool toughness and red hardness compared to hss tools.

PM3THROWAWAY

ø1mm - 12mm HSS-PMVX coated

SteelsStainless Steel

TitaniumCast Iron

• Unique HSS-PM high performance substrate.• Utilizing new VX technology coating for long tool life.• DIN standard shank

HSSCoGENERAL MILLING

ø1mm - 50mm(depending on type) HSS - Cobalt General Purpose

• Various types and forms available 2 & 3 flute multi flute finishing and roughing types to suit various milling applications.

• Flatted shank to DIN1835B.

HSS(SCREWED SHANK)

ø1.5mm - 50mm(depending on type) HSS General Purpose

• Various types and forms available 2 & 3 flute multi flute finishing and roughing types to suit various milling applications.

• Screwed shank to BS122/4.

HSS & HSSCoFORM TOOLS

ø10mm - 52.5mm(depending on type)

HSSHSS-Cobalt General Purpose

• Various types and forms available: Dovetail, T-Slot, Woodruff & Corner Rounding.

• HSSCo flatted shank & HSS screwed shank.

PRODUCT SIZE RANGE TOOLMATERIAL

WORKMATERIAL CHARACTERISTICS

ETUROPA

OOL

ETUROPA

OOL

ETUROPA

OOL

OTHER TOOLS

ETUROPA

OOL Tel: +44 (0) 24 7664 1282 Fax: +44 (0) 24 7664 1390 eMail: sales@europatool.co.uk http://www.europatool.co.uk

UNIMASTER IDXTo suit all ISO

toolholdersHigh performance carbide substrate All work materials

• ISO indexable inserts for turning, milling and drilling.• Grade ET801 for general turning, ET1001 for cast iron turning and

ET602 for milling & drilling. Suitable for demanding applications

REAMERSø2mm - 20mm Carbide General purpose

• For reaming holes to higher tolerance and good finish after general drilling.

• Two types; machine reamers straight flute & machine reamers LH spiral - RH cutting, both with unequal flute spacing.

REAMERSø2mm - 50mm x 0.01(depending on type)

HSSHSS-E General purpose

• Designed for precision sizing of parallel holes.• Available in types hand reamers, machine taper shank, straight shank

chucking & taper shank chucking.

COUNTERSINKS ø4.3mm - 50mm HSSHSS-E General purpose • For deburring, chamfering and countersinking holes.

COUNTERBORESM4 - M202BA - 1”

HSSHSS-E General purpose

• Counterbores are fixed pilot.• Designed for machining screw head seats like fillister screw caps,

socket head screw caps and ejector caps in moulds.

ROTARY BURRSø1.5mm - 25mm Carbide General steels

Non-ferrous metals• For removal sharp corners, burrs and fins etc.• Forms A,B,C,D,E,F,G,H,J,K,L,M,N, all give excellent performance.

PRODUCT SIZE RANGE TOOLMATERIAL

WORKMATERIAL CHARACTERISTICS

ETUROPA

OOL

ETUROPA

OOL

ETUROPA

OOL

SSK TOOL CO., LTD High performance spindle tooling, balanced up 25,000 rpm

Europa Tool Co Ltd

Unit 2 Kingfisher CourtHemdale Business ParkNuneatonWarwickshireCV11 6GY

Tel: +44 (0) 24 7664 1282Fax: +44 (0) 24 7664 1390email: sales@europatool.co.uk

www.europatool.co.uk

ETUROPA

OOL

Thanks to our manufacturing companies’ high quality and reliability of constant product development through innovation, Europa has been rapidly expanding its market share with its global partners.

As one of the leading cutting tool manufacturers in the world we are now ever expanding our customers and products in various cutting tool solutions globally. In order to achieve the most efficient logistics, production, and marketing we have now established a global network across 75 countries.

This gives Europa the opportunity to provide our customers with more success in their business and meet our promise to give our customers the best products & service.

“A whole world of performance tooling”