Date post: | 22-Jan-2018 |
Category: |
Documents |
Upload: | truan-bailey |
View: | 206 times |
Download: | 1 times |
WHO ARE WE?
OUR MISSION
MAINLINE TRACK ARE NEW ZEALAND’S LEADING SUPPLIER OF THE TUFF-PART RANGE OF HIGH QUALITY WEARING PARTS FOR SMALL TO MEDIUM SIZED EARTH MOVING MACHINERY. THROUGH OUR DEDICATION TO SERVICE AND MANY YEARS OF EXPERIENCE WE HAVE BECOME NEW ZEALAND’S NO. 1 SOURCE OF RUBBER TRACKS AND ASSOCIATED WEARING PARTS.
OUR CUSTOMERS RANGE FROM MULTI-DEPOT NATIONAL HIRE GROUPS, TO SINGLE MACHINE OPERATORS AND ALL OF OUR CUSTOMERS ENJOY THE SAME LEVEL OF PERSONAL SERVICE AND INDIVIDUAL ATTENTION.
AT MAINLINE WE BELIEVE THAT TECHNICAL SUPPORT AND PRODUCT KNOWLEDGE ARE OUR COMPANY’S GREATEST STRENGTHS. WITH OVER 40 YEARS EXPERIENCE IN THE EARTHMOVING INDUSTRY, YOU CAN BE CONFIDENT THAT OUR SALES STAFF WILL ADVISE WHICH PRODUCT IS BEST SUITED TO YOUR REQUIREMENTS SO THAT YOUR MACHINE IS RETURNED TO WORK WITH MINIMAL DELAY.
BUILDING STRONG CUSTOMER LOYALTY THROUGH EXCEPTIONAL CUSTOMER SERVICE CREATING A POSITIVE DIFFERENCE IN EVERY CONTACT WE MAKE
NZ FREEPHONE: 0800 551 201 FAX: +64 3 541 0787
EMAIL: [email protected]
WWW.MAINLINETRACK.CO.NZ2
RUBBER TRACKS 4-7
RUBBER PADS 8-9
UNDERCARRIAGE COMPONENTS 10-11
EXCAVATOR BUCKETS 12-13
BUCKET TEETH 14-15
OUR PROMISES 16
IDENTIFICATION CHARTS 17
Crowd/Boom Pin & Bushes
Bucket Pin & Bushes
Crowd/Link Pin & Bushes
Ram Eye Bush
Bucket Pin & Bushes
8
9
10
10a
11
10
8
9
11
10a
A
BC
D
A
B
C
A
B
DELIVERY 18
3
NZ FREEPHONE: 0800 551 201 FAX: +64 3 541 0787
EMAIL: [email protected]
WWW.MAINLINETRACK.CO.NZ
Tuff-trac Rubber Tracks have been designed and developed to meet the challenges of the most demanding applications and to provide unrivalled durability in all working conditions. Using state of the art manufacturing techniques in environmentally controlled conditions, Tuff-trac Rubber Tracks are produced to the highest standards.
Tuff-trac Rubber Tracks are manufactured using rubber compound formulas developed over many years, giving optimum anti-abrasion properties and the natural/synthetic rubber blend ensures consistent quality and superior overall performance.
Tread designs are the product of experience and testing to ensure maximum traction whilst providing reliability and durability. The forged steel drive links are inserted during manufacture to a precise pitch to ensure the smoothest running with minimal vibration. In addition to increased comfort, this results in a reduction in machine maintenance and increased traction.
AVAILABLE TO FIT:-» MICRO – 10 TON EXCAVATORS» TRACKED DUMPERS» SKIP LOADERS» POWERED BARROWS» MINI CRAWLER CRANES
18 MONTHWARRANTY
RUBBERTRACKS
4
5
THE SUCCESS OF MAINLINE AS THE NEW ZEALAND’S LARGEST RUBBER TRACK SUPPLIER CONTINUES WITH OUR EVER INCREASING RANGE OF TRACK SIZES.
Currently holding stock of over 120 sizes of track, we are well placed to service all our customers requirements and together with our ‘Guaranteed-to-fit’ policy, you can be confident that your machine will be ready to earn without delay.
FEATURES:-» AVAILABLE IN OVER 120 SIZES» 18 MONTHS WARRANTY» INCREASED DURABILITY DUE TO OPTIMUM
NATURAL/SYNTHETIC RUBBER BLEND» CONTINUOUS STEEL CORE BAND TECHNOLOGY» GUARANTEED TO FIT POLICY» FORGED EMBEDDED METAL DRIVE LINKS» NEXT-DAY DELIVERY TO MOST PARTS OF NEW ZEALAND» KNOWLEDGEABLE AND FRIENDLY SALES STAFF
Tuff-trac Rubber Tracks have been designed and manufactured with strength and durability being of prime importance.
Extensive research and development has proved that short pitch tracks constructed using continuous steel core bands ensures longer serviceability and greatly reduces the risk of de-tracking.
BENEFITS OF SHORT PITCH:-» REDUCED NOISE WHEN TRACKING» REDUCED VIBRATION» REDUCED UNDERCARRIAGE WEAR» REDUCED PIN & BUSH WEAR ON MACHINE» INCREASED STRENGTH» INCREASED DRIVER COMFORT
SHORTPITCH
RUBBERTRACKS
NZ FREEPHONE: 0800 551 201 FAX: +64 3 541 0787
EMAIL: [email protected]
WWW.MAINLINETRACK.CO.NZ6
TRACK IDENTIFICATION TO ENSURE THAT WE DELIVER THE CORRECT RUBBER TRACK FOR YOUR MACHINE, IT IS ESSENTIAL THAT WE ARE PROVIDED WITH THE CORRECT INFORMATION. OUR KNOWLEDGEABLE SALES STAFF ARE TRAINED TO GUIDE YOU THROUGH THE PROCESS OF IDENTIFICATION, SO THAT YOU CAN BE CONFIDENT OF RECEIVING THE CORRECT SIZE TRACK FOR YOUR MACHINE.
THE CRITICAL INFORMATION REQUIRED IS AS FOLLOWS:-» MACHINE MAKE» MACHINE MODEL» TRACK WIDTH IN MM» TRACK PITCH IN MM (CENTRE TO CENTRE OF DRIVE LINKS)» NUMBER OF DRIVE LINKS
We may request additional information at times to ensure correct track is supplied.
EXAMPLE
WIDTH
DRIVE LINKS
PITCHcentre to centre
300MM 52.5MM 80WIDTH PITCH LINKS
7
RUBBERPADS
THE TUFF-PAD RANGE OF RUBBER PADS ARE EXCLUSIVELY MANUFACTURED FOR SPS AND ARE AVAILABLE FOR TRACKED EXCAVATORS FROM 5-30 TONS.
This unique system of heavy duty rubber pads allows you to retain your existing steel tracks for use on rough terrains whilst enabling them to be converted to rubber when working on surfaces which must not get damaged.
Easily fitted in minimal time, this system allows you to interchange between steel and rubber depending on site conditions without ever changing the tracks.
TUFF-PADS ARE AVAILABLE IN 3 DIFFERENT STYLES AND IN A NUMBER OF SIZES.
BOLT ON PADS
Bolt on pads are very popular for excavators which have bolt holes pre-drilled in the steel pads and are available in various sizes.
Please have available for us the width of the steel Track Pad and bolt hole spacings as shown in fig. B & C on page 17.
NZ FREEPHONE: 0800 551 201 FAX: +64 3 541 0787
EMAIL: [email protected]
WWW.MAINLINETRACK.CO.NZ8
CITY PADSThese pads are different from other types in that they are bolted directly on to the Track chain using track bolts in the same way that a steel track would be.
CLIP-ON RUBBER PADSClip-on type Rubber pads are available for use when you do not have pre-drilled bolt holes in your steel pads.
THESE VERSATILE PADS ARE AVAILABLE FOR A WIDE RANGE OF DIFFERENT MACHINES.
In order to identify which clip-on pad you require it is necessary for us to know the following information:
» TRACK PAD WIDTH (MM)» TOTAL NUMBER OF PADS» TRACK CHAIN PITCH
9
TRACK ROLLERS» TOP AND BOTTOM ROLLERS» MANUFACTURED FROM HEAT TREATED ALLOYS FOR UNIFORM HARDNESS» LIFETIME LUBRICATED WITH SEALED ASSEMBLIES
FOR 0.75 – 8 TON MACHINESCOMPLEMENTING OUR RANGE OF RUBBER TRACKS AND PADS, WE HAVE A WIDE RANGE OF TUFF-PART UNDERCARRIAGE COMPONENTS FOR RUBBER AND STEEL TRACKED EXCAVATORS.
Manufactured using modern state of the art machinery, these components are available from stock for immediate delivery.
UNDER CARRIAGE
COMPONENTS
NZ FREEPHONE: 0800 551 201 FAX: +64 3 541 0787
EMAIL: [email protected]
WWW.MAINLINETRACK.CO.NZ10
SPROCKETS» DESIGNED TO WORK UNDER THE
MOST ARDUOUS CONDITIONS» PRECISION MACHINED AND DEEP
HARDENED TO GIVE LONG SERVICE
IDLERS» IMPACT AND WEAR RESISTANT IDLER
WHEELS FOR LONGER LIFE» LIFETIME LUBRICATED BEARINGS» SUPPLIED COMPLETE WITH SIDE
BLOCK MOUNTINGS FOR IMMEDIATE FITTING
11
FOR 0.75 – 8 TON MACHINES The Tuff-bucket range of Excavator Buckets have been designed and developed with the user in mind. This exclusive range are manufactured to a high specification using superior grade wear resistant steel to maximise wear life, even in the most adverse working conditions.
SPECIAL FEATURES INCLUDE:-» HEAVY DUTY HANGER BRACKETS» BOLT ON REPLACEABLE TEETH
AND SIDE CUTTERS» WEAR STRIPS» HARDENED STEEL CUTTING EDGES» HEAVY DUTY STEEL SIDES
NZ FREEPHONE: 0800 551 201 FAX: +64 3 541 0787
EMAIL: [email protected]
WWW.MAINLINETRACK.CO.NZ
EXCAVATOR BUCKETS
NZ FREEPHONE: 0800 551 201 FAX: +64 3 541 0787
EMAIL: [email protected]
WWW.MAINLINETRACK.CO.NZ12
IN ADDITION TO STANDARD TUFF-BUCKETS, WE CAN MANUFACTURE BUCKETS TO SUIT CUSTOMER’S REQUIREMENTS.
SPECIAL ORDERS INCLUDE:-» CLAY BUCKETS» GRAVE DIGGING BUCKETS» RIDDLE BUCKETS» TELE-HANDLER BUCKETS» BUCKETS TO SUIT DEDICATED QUICK HITCHES» EXTRA HEAVY DUTY UTILITY BUCKETS» BUCKETS WITHOUT TEETH AND FITTED
WITH REVERSIBLE BOLT-ON UNDERBLADES
13
RH
2
1
LH
1
2
32
1
3
4
DESCRIPTION PART NO. 1 2 3 BOLT TYPE
SINGLE STRAP MINI TOOTH 81/20 40mm N/A 13mm 12 x 40mm Countersunk
DOUBLE STRAP MINI TOOTH 131/14 40-45mm 16mm 14mm 12 x 45mm Hex bolt
DOUBLE STRAP KUBOTA TOOTH 122/14 55mm 16mm 16mm 14 x 45mm Hex bolt
DOUBLE STRAP KUBOTA SIDECUTTER 123/14BS 55mm 16mm 16mm 14 x 45mm Hex bolt
DOUBLE STRAP JCB TOOTH MR2 45mm 20mm 21mm 3/4” x 2 1/2” Plow bolt
DOUBLE STRAP JCB SIDECUTTER MR1 45mm 20mm 21mm 3/4” x 2 1/2” Plow bolt
DOUBLE STRAP MASSEY FERGUSON TOOTH 113/14 53mm 25mm 17mm 5/8” x 2 1/2” Plow bolt
DOUBLE STRAP MASSEY FERGUSON SIDECUTTER 113/14BS 53mm 25mm 17mm 5/8 x 2 1/2” Plow bolt
BOLT ON BUCKET TEETHINCLUDED IN THE TUFF-PART RANGE IS OUR EVER INCREASING RANGE OF BUCKET TEETH FOR EXCAVATORS 0.75 – 40 TON.
Manufactured from abrasion resistant steels, these teeth are designed to provide unrivalled performance even in the harshest of working conditions.
Any reference to manufacturers’ names is for identification purposes only and DOES NOT indicate they are made by that company.
BUCKET TEETH
14
NZ FREEPHONE: 0800 551 201 FAX: +64 3 541 0787
EMAIL: [email protected]
WWW.MAINLINETRACK.CO.NZ
CAT SYSTEM TEETH AS PART OF THE TUFF-STEEL RANGE THE CAT TYPE SYSTEM IS AVAILABLE FOR MACHINES FROM 10-40 TONS.
This system gives outstanding performance due to its self sharpening design and the quality abrasion resistant steel.
STANDARD LONG TIP» SIDE PIN AND RETAINER LOCK» RANGE OF SIZES» HEAVY DUTY ABRASION AND PENETRATION STYLES AVAILABLE
15
OUR PROMISES
TO YOU “ WE PROMISE YOU CAN RELY ON WHAT WE SAY “
“ WE PROMISE INDUSTRY LEADING WARRANTY “
“ WE PROMISE KNOWLEDGEABLE HELPFUL STAFF “
“ WE PROMISE TO REWARD LOYALTY “
“ WE PROMISE TO HOLD OUR PROMISES “NZ FREEPHONE: 0800 551 201
FAX: +64 3 541 0787EMAIL: [email protected]
WWW.MAINLINETRACK.CO.NZ16
IDENTIFICATION CHARTS
» RUBBER TRACKS
RH
2
1
LH
1
2
32
1
3
4
FIG A
1 MAXIMUM OUTER GUIDE WIDTH2 MINIMUM OUTER GUIDE WIDTH3 INNER GUIDE WIDTH4 HEIGHT OF LINK
FIG B
1 CLIP ON
» RUBBER PADS
For Clip On Pads please have available the dimensions shown on the left:
Crowd/Boom Pin
Bucket Pins
Crowd/Link Pin
Ram Eye Bush
Bucket Pins
1
2
3
4
5
3
1
2
5
4
A
BC
D
A
B
A
B
C
For Bolt on and City pads please have available the dimensions shown below:
Crowd/Boom Pin
Bucket Pins
Crowd/Link Pin
Ram Eye Bush
Bucket Pins
1
2
3
4
5
3
1
2
5
4
A
BC
D
A
B
A
B
C
Crowd/Boom Pin
Bucket Pins
Crowd/Link Pin
Ram Eye Bush
Bucket Pins
1
2
3
4
5
3
1
2
5
4
A
BC
D
A
B
A
B
C
FIG C
2 BOLT ON FIG D
3 CHAIN ON
» PINS AND BUSHES
Crowd/Boom Pin & Bushes
Bucket Pin & Bushes
Crowd/Link Pin & Bushes
Ram Eye Bush
Bucket Pin & Bushes
8
9
10
10a
11
10
8
9
11
10a
A
BC
D
A
B
C
A
B
FIG E
17
At Mainline we understand the importance of a fast and reliable delivery service and we have chosen to work with premium carrier companies to ensure that your goods arrive at the required destination on time.
Our highly efficient sales staff together with our dedicated warehouse team ensures that all orders received before 4pm are delivered where possible the following day.
As well as Next Day delivery we do offer the option of timed deliveries where downtime is required to be reduced to the absolute minimum. For customers local to our warehouse in Nelson, it is also possible to collect goods if time is of the essence.
DELIVERY OPTIONS:
» NEXT DAY - NATIONWIDE
» AM DELIVERY
» TIMED DELIVERY
» COLLECTION FROM OUR DISTRIBUTION CENTRE
NZ FREEPHONE: 0800 551 201 FAX: +64 3 541 0787
EMAIL: [email protected]
WWW.MAINLINETRACK.CO.NZ
DELIVERY
18
NZ FREEPHONE: 0800 551 201 FAX: +64 3 541 0787
EMAIL: [email protected]
WWW.MAINLINETRACK.CO.NZ
19
NZ FREEPHONE: 0800 551 201 FAX: +64 3 541 0787
EMAIL: [email protected]
WWW.MAINLINETRACK.CO.NZ
MAINLINE TRACK LTD20A Poutama Street
Richmond Nelson
7020 New Zealand