Product GuideProlube LubricantsP.O Box 543515 Pinacle St. Brendale QLD 4500
E: [email protected]: 07 3881 1733F: 07 3881 1708W: www.prolube.com.au
PRODUCT INFORMATION SHEET
Product Name: AGLUBE HTX HARVESTER HYDRAULIC OIL
PRODUCT
Prolube Aglube HTX is an exceptionally shear stable hydraulic oil with excellent anti- wear, anti-foam, anti-corrosion and anti-oxidant properties. It has a very high viscosity index which prevents thinning out at high temperature.
Viscosity
ISO 68 Typical 68 cSt@40oCViscosity Index Typical 149
APPLICATION
Specifically blended to meet the stringent requirements of AUSTOFT and CAMECO DOWN UNDER cane harvesters but can be used in all hydraulic applications where high temperature and severe working conditions exist.
STANDARDS
Meets performance requirements of all major hydraulic pump manufacturers including • Vickers 1-286-S, M-2950-S. • DIN 51524, Part 2. • Parker Hannifin HF-0. • Lee Norse 100-1 • US Steel 136, 127. • Commercial Hydraulics except those with silver bearing surfaces. • General Motors LH-04-1, LH-06-1, LH-15-1. • AFNORE 48-603. • Racine variable volume vane pumps. • Cincinnati Milacron P.68, P.69, P.70.
It is NOT for use in hydraulic equipment with silver bearing surfaces. CONTAINER SIZES
205 Litres, 20 Litres. CONTACT
PROLUBE Lubricants,
P.O. Box 5435, Telephone: (07) 3881.1733 15 Pinacle St, Brendale, Qld. 4500.
Fax: Email: Internet:
(07) 3881.1708 admin@prolube .com.au www.prolube.com.au
Issue Date 26/6/12
PRODUCT INFORMATION SHEET
Product Name: AGLUBE MF (STOU) (SUPER TRACTOR OIL UNIVERSAL)
PRODUCT
Prolube Aglube MF STOU is designed for use in engine crankcases and transmissions, including wet brakes and hydraulics. It is a low phosphorous oil especially blended to give the highest level engine, gear and anti-squawk performance.
Viscosity Typical 13.0 cSt @ 100oC
APPLICATION
Recommended for use in the crankcase of diesel and four stroke petrol engines, hydraulics, transmissions, final drives (API GL4 or less severe applications), wet brakes, power take-offs, hydrostatics and power steerings.
STANDARDS
Meets or exceeds the following: SAE: 20W40 API: CF4 CF CE SF ACEA E2 Caterpillar: TO-2 Ford M2C159B John Deere: JDM J27 Massey Ferguson: M1139, M1144, M1145 Daimler Benz: Sheet 227.1, 228.1, 228.3 API: GL4 (Gear Oil) ZF: TE-ML06B, 06C O6D and 07B Allison: C-4 MAN 271MIL-L-2104D
CONTAINER SIZES
205 Litres, 20 Litres,
CONTACT
PROLUBE Lubricants,
P.O. Box 5435, Telephone: (07) 3881.1733 15 Pinacle St, Brendale, Qld. 4500.
Fax: Email: Internet:
(07) 3881.1708 admin@prolube .com.au www.prolube.com.au
Issue Date 26/6/12
PRODUCT INFORMATION SHEET
Product Name: AGTRANS 410 / 430 / 450 / 460 Transmission / Hydraulic Fluid
PRODUCT
Prolube Agtrans 410, 430 450 and 460 are sophisticated transmission oils which have been developed to meet a range of transmissions used in agricultural and off- road equipment. They meet the requirements of the very latest Caterpillar TO-4, Allison C4, Komatsu and also Eaton and Dana manual transmissions. These oils provide excellent resistance to oxidation and friction and have desirable seal swell characteristics.
410 30 450 460 Viscosity (cSt @ 40oC Typ) 41 98 200 270 Viscosity (cSt @ 100oC) 6.4 11.6 18.7 24.5 SAE Viscosity 10 30 50 60
APPLICATION
Agtrans 410/430 are the primary recommendations for Allison C4 (except "WT") and Caterpillar powershift transmissions. Agtrans 450/460 is the primary recommendation for most heavy duty truck transmissions including Caterpillar, Fuller, Roadranger and Volvo.
STANDARDS
Meets performance requirements of major off-road transmission manufacturers including
Caterpillar: TO4 Allison: C-4 Komatsu Eaton/Fuller ZF: TE-ML03/TE-ML01
. CONTAINER SIZES
205 Litres, 20 Litres. CONTACT
PROLUBE Lubricants,
P.O. Box 5435, Telephone: (07) 3881.1733 15 Pinacle St, Brendale, Qld. 4500.
Fax: Email: Internet:
(07) 3881.1708 admin@prolube .com.au www.prolube.com.au
Issue Date 26/6/12
PRODUCT INFORMATION SHEET
Product Name: AGTRANS TTF PRODUCT
Prolube Agtrans TTF is a high performance Tractor Transmission and Hydraulic Fluid, blended to meet the requirements of most modern Tractors and is suitable for application where manufacturers specify a Tractor Transmission Fluid. TTF also provides excellent frictional characteristics necessary to eliminate brake chatter or squawk in wet brakes. Agtrans TTF has the added bonus of a corrosion inhibition package to coat and protect internal metal surfaces in periods of shut down. Viscosity Typical 10.5 cSt @ 100oC
APPLICATION
This fluid is designed for use in tractors requiring a common lubricant for transmission, final drive, hydraulics and wet brakes. It has been formulated for temperate to hot conditions where sustained thermal stability is essential.
STANDARDS
Meets or exceeds the following: Ford ESN-M2C 134-D, ESN-M2C86-B/C FNHA-2-C-200.00/201.00 Massey Ferguson M1135, M1141, M1143, M1145 John Deere J20C, J20D JDM Case MS.1207, MS 1210 Case New Holland CNH MAT3505, MAT 3525, MAT 3509 ZF TE-ML 05F, 03E, 06K, 17E Kubota UDT Fluid Allison C4 Caterpillar TO-2 Volvo VCE WB 101 API: GL4/80W
CONTAINER SIZES
205 Litres, 60 litres, 20 Litres, 5 Litres. CONTACT
PROLUBE Lubricants,
P.O. Box 5435, Telephone: (07) 3881.1733 15 Pinacle St, Fax: (07) 3881.1708 Brendale, Qld. 4500. Email: admin@prolube Internet: www.prolube.com.au
Issue Date 24/5/2012
PRODUCT INFORMATION SHEET
Product Name: AQUACLEAN PRODUCT
Prolube Aquaclean is a Heavy Duty Aqueous Degreaser consisting of a unique combination of surfactants, chelating agents, alkaline salts and water soluble solvents blended to give a cleaner and outstanding power whilst minimizing environmental impacts and maintaining "Quick Break" capacity.
APPLICATION
Ideal for use in housekeeping, restaurants and all areas of the hospitality industry, as well as workshop environments. Prolube Aquaclean is also excellent as a hard surface cleaner and sanitizer for kitchens, bathrooms and toilet areas and stainless steel.
Degreasing 1 part Aquaclean : 10 parts water Carpet Shampooing 1 part Aquaclean : 25 parts water Concrete Cleaning 1 part Aquaclean : 10 parts water Floor Cleaning 1 part Aquaclean : 20 parts water Window Washing 1 part Aquaclean : 100 parts water High Pressure Cleaning 1 part Aquaclean : 10 parts water Steam Cleaning 1 part Aquaclean : 8 parts water (assumes 1:15 venturi)
Wear gloves and eye protection when handling this product.
CONTAINER SIZES
200 Litres 20 Litres 5 Litres. CONTACT
PROLUBE Lubricants,
P.O. Box 5435, Telephone: (07) 3881 1733 15 Pinacle Street, Brendale, Qld. 4500.
Fax: Email: Internet:
(07) 3881 1708 admin@prolube .com.au www.prolube.com.au
Issue Date 16/1/2014
PRODUCT INFORMATION SHEET
Product Name: AUTOMAX IID AUT OMAT IC T RANSMISSION FLUID
PRODUCT
Prolube Automax IID is an Automatic Transmission Fluid formulated from high quality virgin base oil blended with an excellent additive pack to provide a lubricant which exceeds the requirements of the GM Dexron IIE/IID specifications. This product can be used also in power steering and many hydraulic systems. Although Dexron II is originally a General Motors Specification, there are a number of other vehicle manufacturers who recommend the use of this fluid.
Viscosity Typical 6.9 cSt @ 100oc
APPLICATION
Designed for automatic transmissions, power steering systems, fluid drive systems and hydraulic systems where a Dexron II fluid is specified or indicated.
STANDARDS
Meets or exceeds the following: • General Motors Dexron IIE/IID • caterpillar TO-2 • Sperry, Vickers, Denison and Sunstrand for hydraulic pump systems.
CONTAINER SIZES
205 Litres, 60 Litres, 20 Litres, 5 Litres. CONTACT
PROLUBE Lubricants,
P.O. Box 5435, Telephone: (07) 3881.1733 15 Pinacle St, Fax: (07) 3881.1708 Brendale, Qld. 4500. Email: admin@prolube .com.au Internet: www.prolube.com.au
Issue Date 18/4/13
PRODUCT INFORMATION SHEET
Product Name: AUTOMAX IIID AUTOMATIC TRANSMISSION FLUID
PRODUCT
Prolube Automax IIID is an Automatic Transmission Fluid formulated from high quality base oils blended with an excellent additive pack to provide a lubricant which meets the specific requirements of the GM Dexron® III specifications. Although Dexron® III is a General Motors specification for their vehicles, there are some hydraulic pump manufacturers who recommend the use of this fluid in their hydraulic pump applications.
Viscosity Typical 6.0 cSt @ 100oC
APPLICATION
Designed for automatic transmissions, power steering systems, fluid drive systems and hydraulic systems where a Dexron® III fluid is specified.
STANDARDS
Meets or exceeds the following:
• General Motors Dexron®
III-H, III-G, III-F, III-E, III-D • Mercedes Benz 236.1, 236.5,236.6,236.7 • ZF TE-ML 02F, 04D, 09, 11A, 14A, 17C • Voith 55,6335 and 55,6336 • Allison C4, TES 389 • Caterpillar TO-2 • Chrysler Transmissions (except where MS-9602 or MS-7 176 is specified)
® • Ford Mercon , Ford M2C138-CJ, M2C 166-H Fluids
• Volvo 97340, 97341 • MAN 339 Z1, V1, Z2, V2 • Sperry, Vickers, Denison and Sunstrand for hydraulic pump systems. •
CONTAINER SIZES
205 Litres, 60 Litres, 20 Litres, 5 Litres, 1 Litre. CONTACT
PROLUBE Lubricants,
P.O. Box 5435, Telephone: (07) 3881.1733 15 Pinacle St, Brendale, Qld. 4500.
Fax: Email: Internet:
(07) 3881.1708 admin@prolube .com.au www.prolube.com.au
Issue Date 27/2/14
PRODUCT INFORMATION SHEET
Product Name: AUTOMAX CVT PRODUCT
Prolube Automax CVT is a high performance multivehicle transmission oil for modern vehicles with Continuously Variable Transmissions (CVT). It is blended with synthetic base stocks and specialised additives to give the appropriate friction characteristics required while still providing excellent anti-wear performance for the transmission componentry. It extends transmission life by minimising wear, reduced deposit formations, longer service life due to the full synthetic base stocks and shear-stable additive technology.
Viscosity Typical 8.0 cSt@100oC
APPLICATION
A multi-vehicle CVT fluid for use in the latest model American, European and Asian vehicles belt or chain drive CVTs. It is not suitable for use in Ford and Toyota Hybrid CVT such as in the Prius models.
STANDARDS
Meets the performance requirements of: • Audi VW (TL 52180, G052 180, G052 516) • Ford (CVT 30, Mercon C, CVT 23) • Subaru (Lineartronic CVTF) Honda (HMMF) • Nissan (NS-1, NS-2) Mitsubishi (CVTF-J1) • Mini Cooper (EZL 799A) Punch (EZL 799A) • Hyundai KIA (SP-CVT 1) Suzuki (TC ! NS-2 ! CVT Green 1) • Dodge Jeep (DEX-CVT) MB (236.20)
CONTAINER SIZES
205 Litres 20 Litres 5 Litres CONTACT
PROLUBE Lubricants, P.O. Box 5435, Telephone: (07) 3881.1733 15 Pinacle St, Fax: (07) 3881.1708Brendale, Qld. 4500. Email: admin@prolube Internet: www.prolube.com.au
Issue Date 2!5!2013
PRODUCT INFORMATION SHEET
Product Name: AUTOMAX F4 85/95 AUTOMATIC TRANSMISSION FLUID
PRODUCT
Prolube Automax F4 is an Automatic Transmission Fluid formulated from high quality virgin base oil blended with a superior additive pack to provide a lubricant which meets the requirements of the Ford LE-4 Speed Transmission. Although this fluid was developed for this particular application, it also meets the requirements of a number of other manufacturers, including some MERCON and DEXRON II applications.
Viscosity Typical 7.3 cSt @ 100oC APPLICATION
Designed for automatic transmissions fitted to Ford vehicles, where a BTR 5M-52 85LE/95LE fluid is specified or indicated. .
STANDARDS
Meets or exceeds the following: BTR 5M-52 85LE/95LE transmissions fitted to certain Ford vehicles.
. CONTAINER SIZES
205 Litres, 60 Litres, 20 Litres, 5 Litres, 1 Litre. CONTACT
PROLUBE Lubricants,
P.O. Box 5435, Telephone: (07) 3881.1733 15 Pinacle St, Brendale, Qld. 4500.
Fax: Email: Internet:
(07) 3881.1708 admin@prolube .com.au www.prolube.com.au
Issue Date 18/4/13
PRODUCT INFORMATION SHEET
Product Name: AUTOMAX MTS AUT OMAT IC T RANSMISSION FLUID
PRODUCT
Prolube Automax MTS is an Automatic Transmission Fluid formulated from high quality base oils and additives to meet the recommendations of the Mitsubishi Magna automatic transmissions in particular models. Although this fluid was developed for this particular application, it also meets the requirements of a number of other manufacturers, including some MERCON and DEXRON II applications.
Viscosity Typical 7.3 cSt @ 100oC
APPLICATION
Use in automatic transmissions fitted to Mitsubishi, Hyundai and other vehicles where a MMAL ES-X64022SP2 Fluid is specified or indicated. It is specifically blended for the Mitsubishi damper clutch system, but also suitable for some Hyundai and Proton automatic transmissions.
STANDARDS
Meets or exceeds the following: • MMAL ES-X64022SP2
CONTAINER SIZES
205 Litres, 60 Litres, 20 Litres, 5 Litres. CONTACT
PROLUBE Lubricants,
P.O. Box 5435, Telephone: (07) 3881.1733 15 Pinacle St, Fax: (07) 3881.1708 Brendale, Qld. 4500. Email: admin@prolube .com.au Internet: www.prolube.com.au
Issue Date 16/1/2014
PRODUCT INFORMATION SHEET
Product Name: AUTOSYN 6 PRODUCT
Prolube Autosyn 6 is an Automatic Transmission Fluid formulated from Synthetic base oils blended with a new generation additive package to provide a highly shear-stable automatic transmission fluid which meets the specific requirements of an extensive range of American, European and Asian vehicles and meeting Ford Mercon® V and Dexron VI It extends transmission life via performance anti-wear additives, enhanced frictional properties for smoother gear changes, reduced deposit formations, longer service life due to the full synthetic base stocks and shear-stable additive technology.
Viscosity Typical 7.4 cSt@100oC APPLICATION
A multi-vehicle ATF for use in the latest model American, European and Asian vehicles. Suitable for all Alfa Romeo, Fiat, Opel, & Scion vehicles plus most others as per the list of specifications.
Not recommended for Ford Type F/G DCT and CVT applications.
CONTAINER SIZES
205 Litres 60 Litres 20 Litres
STANDARDS
Meets the performance requirements of: ® ®
• General Motors Dexron VI • Ford MERCON-V
• JASO 1A • Allison C3, C4 • Toyota T-III, T-IV • Hyundai/Kia SP-II, SP-III
Recommended for use for the following applications:
Page 1/2
PROLUBE Lubricants, P.O. Box 5435,
Telephone:
(07) 3881 1733
15 Pinacle Street, Brendale, Qld. 4500.
Fax: Email: Internet:
(07) 3881 1708 admin@prolube .com.au www.prolube.com.au
Issue Date 12/12/2013
Page 2/2
AE (LT71141 - ZF 5 Speed) Alfa Romeo (all vehicles) Aisin Warner AW-1, JWS 3309, JWS 3324, M315 A-1, T IV Allison C-3, C-4 Allison TES 295 Allison TES 389 American Motors ATF +3 (SM7176-E, ATF+4 (MS9602) AS 68 RC (T IV) ATF Type A Suffix A Audi/VW G 052 025-A2 Audi/VW G-052-162-A1 Audi 5 HP LT 71141 (ZF 5 HP 18 FL, 19FL, 24A) Audi 5 HP LT 71141 (G-052-162-A1, A2) Audi 5 HP (ZF 5 HP 30) Audi G-055-025-A2 (JWS 3309) BMW ETL-7045, 7045E (83 22 0 026 922) BMW 7045E (3 series) BMW LA2634 BMW 5 HP LT 71141 (ZF 5 HP 18 FL, 19FL, 24A) BMW 5 HP LT 71141 (83 22 9 407 807) BMW 5 HP (ZF 5 HP 30) BMW ETL-8072B (83 22 0 024 359) BMW MINI 83 22 0 402 413 9 (JWS 3309) BMW 5 Series (Texaco ETL-8072B) Caterpillar Power Shift TO-2 Chrysler ATF +3 (MS 7176-E)/+4 (MS 9602) Chrysler Dodge MOPAR AS 68 RC (T IV) Daimler NAG-1 Deawoo LT 71141 Esso LT 71141 Fiat (All vehicles), TYPE T IV Ford MERCON® (XT-2-QDR, XT-2-QSM SYN) Ford MERCON® V Ford MERCON® LV Ford MERCON® SP Ford WSS M2C 922 A1, 924-A (XT-8-QAW) (JWS 3309) GM DEXRON® II, IID, IIE, III, IIIG, IIIH GM DEXRON® VI GM T IV GM Type A Honda/Acura ATF Z1, DW-1, Premium Honda Z-1 Hyundai NWS-9638, SP-II, SP-III, SP-IV Isuzu Besco ATF II, ATF III Jaguar ATF 3403 M115, LT 71141, jlm 20238 JASO 1-A JASO 2A-02 JATCO FWD in Nissan, Rover 800, VW Polo (Texaco N402) JATCO - Jaguar X Type 2001-2005 (Idemitsu K-17) JATCO 3100 PL085 JEEP ATF+3, ATF+4
JWS 3309 (Aisin Warner) JWS 3309 (T-IV) JWS 3324 (WS) Kia ATF Red 1, SP-II, SP-III, SP-IV MAN 339F, V1, V2, Z1, Z2, Z3 Mazda ATF-M III Mazda ATF - MV Mercedes Benz 223.1, 236.1, 236.2, 236.5, 236.6, 236.7, 236.9, 236.10, 236.12, 236.41 MB ZF 4 HP20 MB 5 Speed 1996-2006 (Shell 3403) Mini Cooper 83 22 0 402 413 9 (JWS 3309, T IV) Mitsubishi Diamond SP-II, SP-III, SP-IV, Dia Nissan/Infinity Matic D/J/K/S NAG 1 (Jeep Cherokee), NAG 2 (Chrysler) Opel (All vehicles) Peugot ZF 4 HP20 Porsche ATF 3403-M115, LT 71141, T IV (JWS 3309) Queen J2 SAAB T IV (JWS 3309) Saturn T IV (JWS 3309) Scion (all vehicles) Shell M 115 SP-II SP-III Subaru ATF, ATF HP Suzuki ATF 3309 Texaco ETL-7045E Texaco ETL-8072B Toyota T-II/T-IV Toyota WS Voith G607 G13636 (55.6336.XX) Voith Turbo H55.6335.3X Volvo 97340, 97341, T IV (JWS 3309) VW 5 HP LT 71141 (ZF 5 HP 18FL, 19FL, 24A) VW 5 HP LT 71141 (VW G-052-162-A1, A2) VW G-052-182-A2 VW 5 HP (ZF 5 HP 30) VW TL 521 62 VW TL52162 ZF 3 and 4 speed transmissions ZF TE ML 02F, 03D, 04D, 05L, 14A, 14B, 14C, 16L, 17C ZF TE-ML-09 ZF TE-ML 11A and 11B
CONTACT
PRODUCT INFORMATION SHEET
Product Name: BITUMEN TEST OIL PRODUCT
Prolube Bitumen Test Oil is blended from high quality virgin base oils to provide a product with stable and known viscosity suitable for the calibration of Bitumen Spray units.
Viscosity ( cSt @ 40oC) 44.0Viscosity ( cSt @ 100oC) 6.8Viscosity ( Typical cSt @ 25oC) 95
APPLICATION
The oil is used to calibrate the bitumen spray units at typically 25oC. Care should be taken to minimise the contamination of the test oil with bitumen or kerosene in order to maintain its viscosity within an acceptable range.
STANDARDS
Meets the requirements of Specification Table 1.1 AG:PT/T536 CONTAINER SIZES
Bulk CONTACT
PROLUBE Lubricants,
P.O. Box 5435, Telephone: (07) 3881.1733 15 Pinacle St, Brendale, Qld. 4500.
Fax: Email: Internet:
(07) 3881.1708 [email protected] www.prolube.com.au
Issue Date 19/7/12
PRODUCT INFORMATION SHEET
Product Name: PROLUBE BRAKE AND PARTS CLEANER
PRODUCT
Prolube Brake and Parts Cleaner is a highly effective, solvent based liquid that has been specifically designed for cleaning brake and clutch parts. It is formulated from fast drying solvents that evaporate quickly, leaving parts ready for immediate reassembly. It is non-residual ensuring that no further cleaning is required. Brake and Parts cleaner is compatible with parts from drum and disk brakes and has no deleterious effects on rubbers used in the systems.
APPLICATION
Best results can be obtained by using spray applicators, typical pump up spray applicators are recommended. The product is highly flammable and should be used with care in safe environment.
CHARACTERISTICS
Flash Point: less than -20oC Appearance: Clear Colourless Liquid
. CONTAINER SIZES
205 Litres, 20 Litres.
CONTACT
PROLUBE Lubricants,
P.O. Box 5435, Telephone: (07) 3881.1733 15 Pinacle St, Brendale, Qld. 4500.
Fax: Email: Internet:
(07) 3881.1708 admin@prolube .com.au www.prolube.com.au
Issue Date 26/6/2012
PRODUCT INFORMATION SHEET
Product Name: CATTLE RUB PRODUCT
Prolube Cattle Rub is a complex mixture of Paraffinic and Napthenic Hydrocarbons that when applied along the vertebrae and head area of cattle forms a barrier or film that is impenetrable to Buffalo Fly. There are no toxic or harmful chemical additives in this product and will not contaminate livestock that are ready for food processing.
APPLICATION
Cattle Rub can be applied by brushing spraying or applying to the many available cattle rub systems available on the market. Insecticides may be added to this product. However, you should research thoroughly the chemical composition and the effectiveness of the product before choosing to do so.
CONTAINER SIZES
205 Litres, 20 Litres.
CONTACT
PROLUBE Lubricants,
P.O. Box 5435, Telephone: (07) 3881 1733 15 Pinacle Street, Brendale, Qld. 4500.
Fax: Email: Internet:
(07) 3881 1708 admin@prolube .com.au www.prolube.com.au
Issue Date 27/9/2011
PRODUCT INFORMATION SHEET
Product Name: PROLUBE CLEANPOWER PRODUCT
Prolube Cleanpower is an highly concentrated chemical that efficiently cleans the entire fuel system. Contaminants are finely dispersed to pass harmlessly through filters, fuel pumps and injectors. Cleanpower includes an upper cylinder lubricant for additional lubrication, as well as powerful anti-rust protection. Improved fuel atomization provides cleaner fuel combustion with less residue for deposit formation. Engine idle and operating performance is optimized and combustion chamber cleanliness improves.
APPLICATION
Prolube Cleanpower is simply added to the fuel either in bulk storage or as refuelling. Initial Dose. Simply add to the fuel (petrol or diesel) at 1:4000, eg 20mL in 80L fuel, 100ml in 400L fuel. Thereafter. With continuous use, rate should be halved, ie 1:8000, eg 10mL in 80L fuel, 50mL in 400L fuel.
CONTAINER SIZES
5 Litres 1 Litre.
CONTACT
PROLUBE Lubricants,
P.O. Box 5435, Telephone: (07) 3881 1733 15 Pinacle Street, Brendale, Qld. 4500.
Fax: Email: Internet:
(07) 3881 1708 admin@prolube .com.au www.prolube.com.au
Issue Date 16/1/2014
PRODUCT INFORMATION SHEET
Product Name: CLEAR KEROSENE PRODUCT
Prolube Clear Kerosene is a solvent based cleaning fluid for use where solvent based fluids are recommended. This product does not mix with water. • Store product in cool area away from direct sunlight • Contains Liquid Hydrocarbons • Flash point 38°C Abel (Flammable).
APPLICATION
For best results, ensure surface is free of water then spray or brush liquid on to surface to be cleaned.
CONTAINER SIZES
205 Litres 20 Litres.
CONTACT
PROLUBE Lubricants,
P.O. Box 5435, Telephone: (07) 3881 1733 15 Pinacle Street, Brendale, Qld. 4500.
Fax: Email: Internet:
(07) 3881 1708 admin@prolube .com.au www.prolube.com.au
Issue Date 16/1/2014
Product 46 68Viscosity 46 68
PRODUCT INFORMATION SHEET
Product Name: COMPTEC ASHLESS ISO 46, 68 COMPRESSOR OIL
PRODUCT
Prolube Comptec Ashless Compressor Oil is blended from semi synthetic and highly refined virgin base oils, with anticorrosion, anti-oxidisation and ashless anti-wear additives. The product also has good anti-foam and excellent thermal resistance properties.
Typical cSt @ 40oC APPLICATION
Suitable for use in all types of reciprocating air compressors and high performance drip feed rotary or screw compressors and vacuum pumps. The superior base oils and ashless additive package provide for reduced carbon and ash deposits in valves and discharge lines. A long service life can be expected over a wide range of operating temperatures. Viscosity choice should be according to manufacturer's recommendations.
STANDARDS
• DIN 51506 (VBL, VCL, VDL) • ISO / DP 6521 (DAA, DAB, DAH, DAG) • DIN 51524 Part 1 • Siemens TLV 9013 • British Standard BS 489 • US Steel 120
CONTAINER SIZES
205 Litres, 20 Litres,
CONTACT
PROLUBE Lubricants,
P.O. Box 5435, Telephone: (07) 3881.1733 15 Pinacle St, Brendale, Qld. 4500.
Fax: Email: Internet:
(07) 3881.1708 admin@prolube .com.au www.prolube.com.au
Issue Date 26/6/2012
PRODUCT INFORMATION SHEET
Product Name: COMPTEC ISO 32, 46, 68, 100, 150 COMPRESSOR OIL
PRODUCT
Prolube Comptec Compressor Oil is blended from semi synthetic and highly refined virgin base oils, with anticorrosion, anti-oxidisation and anti-wear additives. The product also has good anti-foam and excellent thermal resistance properties.
Product 32 46 68 100 150Viscosity (Typical cSt @ 40oC) 32 46 68 100 150Viscosity (Typical cSt @ 100oC) 5.5 6.8 8.6 11.3 15.0Viscosity Index 110 100 100 100 100Specific Gravity 0.87 0.88 0.88 0.88 0.89Rust Test (ASTM D665B) ----------------Pass-------------------- CCR Oxidation (DIN 51352-2) % wt 0.7 0.7 1.0 1.5 2.0
APPLICATION
Suitable for use in all types of reciprocating air compressors and high performance drip feed rotary or screw compressors and vacuum pumps. A long service life can be expected in good conditions with a wide range of operating temperatures. Can be used as an hydraulic oil in non-severe applications. Viscosity choice should be according to manufacturer's recommendations.
STANDARDS
• DIN 51524 Part 2 (HLP) and Part 3 (HVLP) • AFNOR NF E48-603 HM and HV • Eaton Brochure 694 for 35VQ25A
CONTAINER SIZES
205 Litres, 20 Litres, CONTACT
PROLUBE Lubricants,
P.O. Box 5435, Telephone: (07) 3881.1733 15 Pinacle St, Brendale, Qld. 4500.
Fax: Email: Internet:
(07) 3881.1708 admin@prolube .com.au www.prolube.com.au
Issue Date 26/6/2012
Product 32 46 68 100 150 Viscosity 32 46 68 100 150
PRODUCT INFORMATION SHEET
Product Name: COMPTEC ISO 32, 46, 68, 100, 150 COMPRESSOR OIL
PRODUCT
Prolube Comptec Compressor Oil is blended from semi synthetic and highly refined virgin base oils, with anticorrosion, anti-oxidisation and anti-wear additives. The product also has good anti-foam and excellent thermal resistance properties.
Typical cSt @ 40oC APPLICATION
Suitable for use in all types of reciprocating air compressors and high performance drip feed rotary or screw compressors and vacuum pumps. A long service life can be expected in good conditions with a wide range of operating temperatures. Can be used as an hydraulic oil in non severe applications. Viscosity choice should be according to manufacturer's recommendations.
STANDARDS
• DIN 51524 Part 2 (HLP) and Part 3 (HVLP) • AFNOR NF E48-603 HM and HV • Eaton Brochure 694 for 35VQ25A
CONTAINER SIZES
205 Litres, 20 Litres,
CONTACT
PROLUBE Lubricants,
P.O. Box 5435, Telephone: (07) 3881.1733 15 Pinacle St, Brendale, Qld. 4500.
Fax: Email: Internet:
(07) 3881.1708 admin@prolube .com.au www.prolube.com.au
Issue Date 26/6/2012
PRODUCT INFORMATION SHEET
Product Name: CPS WASH (COTTON PICKER SPINDLE WASH)
PRODUCT
Prolube CPS Wash is a green emulsifiable liquid detergent used to keep cotton picker machine spindles clean and free of sap and plant debris especially where crops are green.
APPLICATION
CPS Wash is added to the water tank to eliminate sap build-up on spindles. It also provides fine lubrication to spindles to prevent spindle overheating, wear and corrosion. The application rate should be up to 1% by volume added to the water or applied according to the machine operator’s handbook.
FUNCTIONS
• Reduces downtime by eliminating sap build up on spindles.
• Prolongs equipment life by reducing wear and corrosion.
• Tolerates a wide range of water quality and types.
• Biodegradable
• Non foaming and does not build up residue.
CONTAINER SIZES
20 Litres.
CONTACT
PROLUBE Lubricants,
P.O. Box 5435, Telephone: (07) 3881.1733 15 Pinacle Street, Brendale, Qld. 4500.
Fax: Email: Internet:
(07) 3881.1708 admin@prolube .com.au www.prolube.com.au
Issue Date 13/9/12
PRODUCT INFORMATION SHEET
Product Name: DECARBONISER
PRODUCT
Prolube Decarboniser is ideal for safely burning off cylinder glaze and carbon from combustion and exhaust spaces. Engines using Decarboniser become totally free of hard carbon build up. Decarboniser can correct smoke, power loss, heavy fuel consumption, blowby, oil dripping, hard starting, caused by glaze and/or carbon build-up. It is ideal for running in new engines, and will also kill diesel fuel fungal growths.
APPLICATION
Add Decarboniser to the fuel each fill at a mix rate of 1:1600. For an initial treat, use at double stength
For: 50 litres fuel add 30 mls 100 litres fuel add 60 mls 160 litres fuel add 100 mls 500 litres fuel add 300 mls
CONTAINER SIZES
5 Litres 1 Litre.
CONTACT
PROLUBE Lubricants,
P.O. Box 5435, Telephone: (07) 3881 1733 15 Pinacle Street, Brendale, Qld. 4500.
Fax: Email: Internet:
(07) 3881 1708 admin@prolube .com.au www.prolube.com.au
Issue Date 16/1/2014
PRODUCT INFORMATION SHEET
Product Name: DEGTEC SOLVENT DEGREASER
PRODUCT
Degtec is a solvent-based fast-acting, quick-break concentrated degreaser specifically formulated for use in removing grease and oil deposits on engines, spare parts, lube bay floors and general degreasing operations. • Store product in cool area away from direct sunlight. • Contains Liquid Hydrocarbons • Flashpoint 40°C (Flammable)
APPLICATION
For best results ensure surface is free of water then spray or brush liquid on to surface to be cleaned. Leave for a few minutes, then hose off. For best results use product as supplied, can be diluted 1:5 with Kerosene.
CONTAINER SIZES
205 Litres 20 Litres 5 Litres. CONTACT
PROLUBE Lubricants,
P.O. Box 5435, Telephone: (07) 3881 1733 15 Pinacle Street, Fax: (07) 3881 1708 Brendale, Qld. 4500. Email: admin@prolube .com.au Internet: www.prolube.com.au
Issue Date 13/2/2014
PRODUCT INFORMATION SHEET
Product Name: DRAWTEC DRAWING LUBRICANT/CORROSION PREVENTIVE
PRODUCT
Prolube Drawtec is a multi-purpose blank washer/roll leveller/drawing oil and corrosion preventive. This product is a lubricant rust preventive that is designed to be applied to steel sheet and/or blanks in any of the above operations. It is an oildispersed product providing medium to long term indoor protection of ferrous and non-ferrous surfaces. Prolube Drawtec provides high humidity protection and has built-in protection against sulphuric acidic components in normal industrial atmospheres; has excellent antiwear performance and stable low friction, and it reduces friction, pick-up and surface scoring. It has excellent resistance to staining and varnishing in storage on metal-to-metal contact, especially with moisture contamination present. This property has provided excellent resistance to "puddle stain". Prolube Drawtec is easy to apply and remove and is compatible with EPD (Electronic Deposition Paint).
APPLICATION
Tube drawing, Cold-forming and extruding of stainless steel and high nickel alloys. Deep drawing of difficult steels and alloys. Corrosion preventive for medium term indoor storage of steel surfaces.
CONTAINER SIZES
205 Litres 20 Litres. CONTACT
PROLUBE Lubricants,
P.O. Box 5435, Telephone: (07) 3881 1733 15 Pinacle Street, Brendale, Qld. 4500.
Fax: Email: Internet:
(07) 3881 1708 admin@prolube .com.au www.prolube.com.au
Issue Date 16/1/2014
PRODUCT INFORMATION SHEET
Product Name: DRIP OIL 32 Irrigation Turbine Pump Lubricant
PRODUCT
Prolube Drip Oil is a premium blend of hydrotreated paraffinic base oils and low toxicity additives, especially formulated to have minimal environmental impact on ground water.
Viscosity
ISO 32 Typical 32 cSt@40oCViscosity Index Typical 105
APPLICATION
Prolube Drip Oil 32 has a stable viscosity suitable for all current design drip oilers used to lubricate the bearings of vertical shaft driven deep well turbine pumps. The product will provide good protection against wear and corrosion in the turbine bearings while at the same time having minimal impact on the environment through groundwater contamination. Prolube Drip Oil 32 is not food grade rated - if this is required please contact your Prolube distributor.
STANDARDS
Meets performance requirements of all major deep well turbine pump manufacturers. CONTAINER SIZES
205 Litres, 20 Litres.
CONTACT
PROLUBE Lubricants,
P.O. Box 5435, Telephone: (07) 3881.1733 15 Pinacle St, Brendale, Qld. 4500.
Fax: Email: Internet:
(07) 3881.1708 admin@prolube .com.au www.prolube.com.au
Issue Date 27/3/14
PRODUCT INFORMATION SHEET
Product Name: EURO BLUE PRODUCT
Euro Blue is an aqueous Urea Solution. It is used in the Selective Catalytic Reduction (SCR) systems fitted to diesel vehicles in compliance with exhaust emission standards reducing oxides of nitrogen from exhaust gases. Euro Blue contains high purity urea in a clear demineralised water, is non toxic and safe to handle.
APPLICATION
Used in vehicles fitted with an SCR (Selective Catalytic Reduction) system for management of oxides of nitrogen in exhaust emissions. This product is added to the tank fitted to the vehicles. Use as per manufacturers recommendations.
CONTAINER SIZES
205 Litres, 20 Litres.
CONTACT
PROLUBE Lubricants,
P.O. Box 5435, Telephone: (07) 3881 1733 15 Pinacle Street, Brendale, Qld. 4500.
Fax: Email: Internet:
(07) 3881 1708 admin@prolube .com.au www.prolube.com.au
Issue Date 27/9/2011
PRODUCT INFORMATION SHEET
Product Name: EUROFLEET 15W40 CI·4 PRODUCT
Prolube Eurofleet CI-4 SHPD is a Super High Performance Diesel multigrade engine oil which gives outstanding performance in European turbo-charged diesel engines. It is especially effective in reducing oil consumption and resists bore polishing. It is recommended particularly where extended oil drains are anticipated.
Viscosity (Typical) 15.0 cSt @ 100oC
124 cSt @ 40oC Viscosity Index 123 TBN 10.12 mg KOH/g Sulphated Ash 1.42 mass/wt-%
APPLICATION
The primary recommendation is for long haul, European style diesels. Eurofleet is suitable for electronically controlled engines, where high soot loading is experienced and for extended drain or severe service conditions. Extended drain intervals should be in compliance with the engine manufacturer guidelines and in conjunction with oil analysis checks.
STANDARDS
Meets or exceeds the following or is recommended for: SAE Grade: 15W40 ACEA: A3/B3/B4-10 E7-08 E7/B4/A3-07 E7/B4/B3/A3-04 E5/E3/B4/B3/A3-02 API CI-4, CH-4/SL, SJ Mercedes MB 228.2 228.3 Volvo VDS 3
Renault RLD2 MAN 3275 MTU Type 2 CAT ECF 1a, ECF-2 CUMMINS CES 20076, 77, 78 Mack EO-M PLUS
CONTAINER SIZES
205 Litres, 20 Litres, 5 Litres.
CONTACT
PROLUBE Lubricants,
P.O. Box 5435, Telephone: (07) 3881.1733 15 Pinacle St, Fax: (07) 3881.1708 Brendale, Qld. 4500. Email: admin@prolube .com.au Internet: www.prolube.com.au
Issue Date 16/1/2014
PRODUCT INFORMATION SHEET
Product Name: EUROMAX 10W40 SYNTHETIC
PRODUCT
Prolube Euromax is a low SAPS Ultra High Performance synthetic diesel engine oil meeting Euro I, II, III, IV & V emission requirements. Recommended for use in naturally aspirated and turbocharged four stroke diesel engines, including those fitted with emission control systems (Nox reduction systems and particulate filters) in combination with low sulphur diesel fuels (maximum 50ppm). This formulation uses the latest in European diesel technology additive packages to provide superior anti-wear, anti- corrosion, anti-oxidant protection and exceptional soot control.
Viscosity Typical 14.0 cSt @ 100oC
APPLICATION
Specifically designed to meet European emission standards this product is suited for mixed fleet operators. It is the global recommendation for late model European diesel engines in long haul, extended drain cycle applications. Extended drain cycles should be monitored via oil analysis to attain maximum drain periods.
STANDARDS
Meets or exceeds the following: SAE Grade 10W40 ACEA 08 E6/E7/E9 Issue 2 (2010) API CI-4 MB 228.51 MAN 3477, 3271-1 MTU Type 3.1 Volvo VDS 3, CNG Renault RXD/RGD Deutz DQC III-05 Cat ECF-1-a Mack EO-M Plus, EO-N Cummins CES 20076, 20077 Deutz DQC IV-10 LA Scania Low Ash
CONTAINER SIZES
Bulk, 205 Litres, 20 Litres. CONTACT
PROLUBE Lubricants,
P.O. Box 5435, Telephone: (07) 3881 1733 15 Pinacle St, Brendale, Qld. 4500.
Fax: Email: Internet:
(07) 3881 1708 admin@prolube .com.au www.prolube.com.au
Issue Date 6/9/2102
PRODUCT INFORMATION SHEET
Product Name: FOOD MACHINERY GREASE PRODUCT
Prolube Food Machinery Grease is a premium, quality grease suitable for use in processing food and food support products, such as packages, cartons etc. where incidental contact with the lubricants may occur in the process. It is made with a USP white mineral oil and a special aluminium complex thickener. It contains additives to provide protection against rust and to resist oxidation. It also protects during periods of machine idleness. This grease resists water washout and provides a seal against the entrance of water, steam, fruit and vegetable juices to the bearing and has high stability against chemical changes. It is pure white, odourless and tasteless.
Appearance Pure White, odourless, tasteless Worked Penetration 280 mm ASTM D217 Oil Viscosity 220 cSt@40oC Typical Timken OK Load 40 ASTM D2509 4 Ball Weld Test 480 kg ASTM D2596
APPLICATION
Prolube Food Machinery Grease is used in gearboxes, plain and anti-friction bearings in mobile machinery where the grease needs to flow to the point of application. It is also used in gearboxes where sealing is poor or where seals are worn and gear oils cannot be retained. The grease has excellent lubrication qualities and is ideal for pumping or for use in once through centralised automatic or semi automatic lubrication systems. As it is a multipurpose product, it helps simplify lubrication maintenance and aids in reducing inventories. The recommended temperature range is from -30 oC to 160oC, however Food Machinery Grease may be used at higher temperatures with the lubrication frequency increased accordingly.
STANDARDS
Dept of Primary Industries and Energy: Food Grade Lubricant Type A NLGI No.2 Meets Section 178.3570 of the US Food and Drug Administration regulations.
CONTAINER SIZES
2.5 kg CONTACT
PROLUBE Lubricants,
P.O. Box 5435, Telephone: (07) 3881.1733 15 Pinacle St, Brendale, Qld. 4500.
Fax: Email: Internet:
(07) 3881.1708 admin@prolube .com.au www.prolube.com.au
Issue Date 26/6/2012
PRODUCT INFORMATION SHEET
Product Name: FORM OIL CONCENTRATE PRODUCT
Prolube Form Oil Concentrate is used to prepare a general purpose concrete release agent which can be used on all types of both timber and metal formwork.
APPLICATION
Form Oil Concentrate is generally added to either kerosene or distillate in the ratio of one part concentrate to three parts solvent. Apply with a spray or brush to obtain an even coating.
CONTAINER SIZES
205 Litres 20 Litres.
CONTACT
PROLUBE Lubricants,
P.O. Box 5435, Telephone: (07) 3881 1733 15 Pinacle Street, Brendale, Qld. 4500.
Fax: Email: Internet:
(07) 3881 1708 admin@prolube .com.au www.prolube.com.au
Issue Date 16/1/2014
PRODUCT INFORMATION SHEET
Product Name: GAS ENGINE OIL SLF 40
PRODUCT
Prolube Gas Engine Oil SLF 40 is a premium, semi-synthetic gas engine oil specifically designed for use in engines operating on sour land fill gas or digester gas. It is a heavy duty product, with high alkalinity reserve and low ash level. This product can significantly extend oil drain intervals while minimizing the negative effects of ash deposits on sensitive engine components. Reduced ash deposits will also help to maintain the power output of high BMEP engines. This low phosphorous content product is also designed to meet catalyst manufacturers recommendations.
Viscosity Typical 15.0 cSt @ 100oG Sulphated Ash 5.5 % wt
APPLICATION
Prolube Gas Engine Oil SLF 40 is recommended for use in stationary four cycle engines operating on biogas, land fill gas or sour natural gas.
STANDARDS
Meets or exceeds the following: SAE Grade: 40
. CONTAINER SIZES
205 Litres.
CONTACT
PROLUBE Lubricants,
P.O. Box 5435,
Telephone:
(07) 3881 1733 15 Pinacle Street, Brendale, Qld. 4500.
Fax: Email: Internet:
(07) 3881 1708 admin@prolube .com.au www.prolube.com.au
Issue Date 21/11/2013
PRODUCT INFORMATION SHEET
Product Name: PROLUBE HANDCLEANER PRODUCT
Prolube Handcleaner is a premium quality water based hand cleaner, ideal for removing dirt, grease and grime. Prolube Handcleaner contains polymer beads for deep cleansing of the skin. Prolube Handcleaner has a neutral pH and will not irritate sensitive skin. It contains no petroleum solvents and is boosted with lanoline to moisturise the skin. It has a pleasant citrus fragrance that leaves hands refreshed.
APPLICATION
Apply a small quantity of Handcleaner to the hands and rub in thoroughly. Rinse off hands with cold or warm water and dry skin with paper or cloth towel.
CONTAINER SIZES
20 Litres 5 Litres 1 Litre.
CONTACT
PROLUBE Lubricants,
P.O. Box 5435, Telephone: (07) 3881 1733 15 Pinacle Street, Brendale, Qld. 4500.
Fax: Email: Internet:
(07) 3881 1708 admin@prolube .com.au www.prolube.com.au
Issue Date 16/1/2014
PRODUCT INFORMATION SHEET
Product Name: HTQ HEAT TRANSFER AND QUENCHING OIL
PRODUCT
Prolube Heat Transfer and Quenching Oil is blended from high viscosity base oils blended with special additives to form a multi-functional product. The oil provides good oxidative performance, high resistance to heat decomposition, has good heat transfer characteristics and low deposit formation determined by the panel coker test.
Viscosity ISO 32 Grade
Typical 32.0 cSt @ 40oC APPLICATION
Heat Transfer: use in totally enclosed heat transfer systems of industrial equipment. General purpose quenching oil for heat treatment.
STANDARDS
Excellent ASTM D3520 (GM Quenchometer) performance. Maximum Film Temperature 315oC Maximum Bulk/Use Temperature 285oC
CONTAINER SIZES
205 Litres, 20 Litres.
CONTACT
PROLUBE Lubricants,
P.O. Box 5435, Telephone: (07) 3881 1733 15 Pinacle St, Brendale, Qld. 4500.
Fax: Email: Internet:
(07) 3881 1708 admin@prolube .com.au www.prolube.com.au
Issue Date 6/9/2102
PRODUCT INFORMATION SHEET
Product Name: HVX 2000 20W50 SG CD PRODUCT
Prolube HVX 2000 is a all-purpose petrol/LP/Turbo/Light Diesel engine oil, designed for reliable, everyday motoring. It offers outstanding all-round engine protection with specialised anti-sludge, anti-wear technology. It includes a fortified additive package for constant tropical climate service.
Viscosity Typical 18.0 cSt @ 100oG
APPLICATION
Designed for pre-1992 4 stroke and rotary motors using LP, ULP, PULP and LPG fuels and requiring an SAE 20W50 engine oil. While it is designed to minimise oxidation, deposits and component wear in pre-1992 motors including turbocharged models, it is also suitable for light duty passenger car style diesel motors.
STANDARDS
Meets or exceeds the following: SAE Grade: 20W50 API: SG GD
CONTAINER SIZES
205 litres 60 litres, 20 litres, 5 litres, CONTACT
PROLUBE Lubricants,
P.O. Box 5435, Telephone: (07) 3881.1733 15 Pinacle St, Brendale, Qld. 4500.
Fax: Email: Internet:
(07) 3881.1708 admin@prolube .com.au www.prolube.com.au
Issue Date 26/6/2012
PRODUCT INFORMATION SHEET
Product Name: HVX 3000 25W60 SG CD PRODUCT
Prolube HVX 3000 is a high viscosity petrol/LPG/light diesel engine oil formulated for large 4, 6 and 8 cylinder sports and performance motors. It is designed for constant running, commercial applications and it provides extended protection for high mileage motors. In high mileage, high wear motors, it reduces oil consumption.
Viscosity Typical 24.0 cSt @ 100oG
APPLICATION
This oil is designed for 4 stroke petrol motors using LP, ULP, PULP and LPG fuels and requiring a high viscosity engine oil to reduce oil usage and/or oil pressure drop in severe service. It is suitable also for light duty passenger car-style diesel motors.
STANDARDS
Meets or exceeds the following: SAE Grade: 25W60 API: SG GD
CONTAINER SIZES
205 litres 60 litres, 20 litres, 5 litres. CONTACT
PROLUBE Lubricants,
P.O. Box 5435, Telephone: (07) 3881.1733 15 Pinacle St, Brendale, Qld. 4500.
Fax: Email: Internet:
(07) 3881.1708 admin@prolube .com.au www.prolube.com.au
Issue Date 26/6/2012
PRODUCT INFORMATION SHEET
Product Name: HVX 4000 20W50 SL CF PRODUCT
Prolube HVX 4000 engine oil has modern technology for late model, high stress applications. It provides the maximum protection against wear, corrosion, oxidisation and sludge formation and is particularly suitable for naturally aspirated and turbo- charged models. HVX 4000 oil can be used in light and medium duty diesel engines and it provides enhanced valve train lubrication in modern unleaded petrol and LP gas motors.
Viscosity Typical 18.3 cSt @ 100oC APPLICATION
This oil is designed for all 4 stroke and rotary petrol motors using LP, ULP, PULP and LP gas fuels and requiring an SAE 20W50 engine oil. Although it was specifically designed for post-1997 model motors, including multi-valve and turbo- charged motors, it is also suitable for light duty passenger car style diesel motors.
STANDARDS
Meets or exceeds the following: SAE Grade: 20W50 API: SL CF ACEA: A3 / B3-04 MB 229.1 VW 505 00 JASO MA
. CONTAINER SIZES
205 Litres, 20 Litres, 5 Litres.
CONTACT
PROLUBE Lubricants,
P.O. Box 5435, Telephone: (07) 3881.1733 15 Pinacle St, Brendale, Qld. 4500.
Fax: Email: Internet:
(07) 3881.1708 admin@prolube .com.au www.prolube.com.au
Issue Date 26/6/2012
PRODUCT INFORMATION SHEET
Product Name: HVX 5000 40W70 PRODUCT
Prolube HVX 5000 is a high performance, high viscosity engine oil specifically blended for older motors showing signs of advanced wear. It provides excellent protection against wear, corrosion, oxidisation and sludge deposits. The high viscosity enables this product to maintain oil pressure and lubricity even under extremely hot conditions. This oil is suitable for engines running on unleaded petrol or LP Gas.
Viscosity Typical 28.3 cSt @ 100oc APPLICATION
This oil is designed for 4 stroke petrol motors using LP, ULP, PULP and LPG fuels and requiring a high viscosity engine oil to reduce oil consumption and component wear. It is also suitable for sports and performance motors built with wide component clearances but it is not recommended for diesel, multi-valve or turbo charged motors.
STANDARDS
Meets or exceeds the following: SAE Grade: 40W70 API: SG
CONTAINER SIZES
205 Litres, 20 Litres, 5 Litres.
CONTACT
PROLUBE Lubricants,
P.O. Box 5435, Telephone: (07) 3881.1733 15 Pinacle St, Brendale, Qld. 4500.
Fax: Email: Internet:
(07) 3881.1708 admin@prolube .com.au www.prolube.com.au
Issue Date 26/6/2012
PRODUCT INFORMATION SHEET
Product Name: HVX MS 15W50 SL CF PRODUCT
Prolube HVX MS engine oil has modern technology for late model, high stress applications. It provides the maximum protection against wear, corrosion, oxidisation and sludge formation and is particularly suitable for naturally aspirated and turbo- charged models. HVX MS oil can be used in light and medium duty diesel engines and it provides enhanced valve train lubrication in modern unleaded petrol and LP gas motors. This product is also suitable for four stroke motorcycles fitted with wet clutches.
Viscosity Typical 18.3 cSt @ 100oC
APPLICATION
This oil is designed for all 4 stroke and rotary petrol motors using LP, ULP, PULP and LP gas fuels and requiring an SAE 15W50 engine oil. Although it was specifically designed for post-1997 model motors, including multi-valve and turbo- charged motors, it is also suitable for light duty passenger car style diesel motors.
STANDARDS
Meets or exceeds the following: SAE Grade: 15W50 API: SL CF ACEA: A3 / B3-04 MB 229.1 VW 505 00 JASO MA
. CONTAINER SIZES
205 Litres
CONTACT
PROLUBE Lubricants,
P.O. Box 5435, Telephone: (07) 3881.1733 15 Pinacle St, Brendale, Qld. 4500.
Fax: Email: Internet:
(07) 3881.1708 admin@prolube .com.au www.prolube.com.au
Issue Date 26/6/2012
PRODUCT INFORMATION SHEET
Product Name: HVX MULTI·V 10W30 SL CF PRODUCT
Prolube HVX.Multi-V 10W30 is a heavily fortified oil which uses the latest additive technology to provide significantly better performance in late model petrol engines. It is suitable for naturally aspirated and turbocharged motors. It ensures better rust and corrosion protection, less oil oxidation and superior deposit control and wear protection. This product is particularly recommended where the manufacturer requires the use of a lighter multigrade oil or where vehicles encounter lower temperature operation, providing superior component protection at cold start-up.
Viscosity Typical 10.0 cSt @ 100oC
APPLICATION
This oil is designed for late model 4-stroke petrol motors, particularly multi-valve, multi-cam models requiring lower viscosity oils for fuel economy, low emissions and high performance. It has been formulated for applications where 5W30 to 10W30 engine oils are specified.
STANDARDS
Meets or exceeds the following: SAE Grade: 10W30 API: SL CF ACEA: A3 / B3 ILSAC: GF2
. CONTAINER SIZES
205 Litres, 20 Litres, 5 Litres, 1 Litre.
CONTACT
PROLUBE Lubricants,
P.O. Box 5435, Telephone: (07) 3881.1733 15 Pinacle St, Brendale, Qld. 4500.
Fax: Email: Internet:
(07) 3881.1708 admin@prolube .com.au www.prolube.com.au
Issue Date 26/6/2012
PRODUCT INFORMATION SHEET
Product Name: HVX TURBO 15W50 CI·4 SL PRODUCT
Prolube HVX Turbo 15W50 combines the very latest additive technology and high quality base oils to provide a lubricant with exceptional performance in the latest model turbo charged diesel and petrol engines. This product ensures less oil thickening; better oxidation and corrosion resistance, less wear and improved all- round performance. It is recommended for mixed fleet service where late model vehicles are in use, particularly where they work under hot or adverse conditions.
Viscosity Typical 18.55 cSt @ 100oC APPLICATION
Designed for 4 stroke motors using LP, ULP, PULP, LPG and diesel fuels particularly in high performance applications. It is specifically designed as an alternative to synthetic lubricants and as a means of maintaining component protection in high stress applications.
STANDARDS
Meets or exceeds the following or is recommended for: SAE Grade: 15W50 API CI-4, CH-4/SL, SJ CUMMINS CES 20076, 77, 78 Mack EO-M PLUS ACEA: 08 E7 07 E7/B4/A3 04 E7/B4/B3/A3 02 E5/E3/B4/B3/A3 Mercedes MB 228.2 228.3 Volvo VDS 3
Renault RLD2 MAN 3275 MTU Type 2 CAT ECF 1a, ECF-2
CONTAINER SIZES
205 Litres, 20 Litres, 5 Litres. CONTACT
PROLUBE Lubricants,
P.O. Box 5435, Telephone: (07) 3881.1733 15 Pinacle St, Fax: (07) 3881.1708 Brendale, Qld. 4500. Email: admin@prolube .com.au Internet: www.prolube.com.au
Issue Date 26/6/2012
PRODUCT INFORMATION SHEET
Product Name: HYPLEX BIOGEN ISO 68 (BIODEGRADABLE HYDRAULIC OIL)
PRODUCT
Prolube HYPLEX BIOGEN is a canola based hydraulic oil blended with a thermally stable ashless additive package, which inhibits oxidation, protects bearings from corrosion and prevents wear. Hyplex BIOGEN provides excellent performance in extremes of temperature and working conditions. Hyplex Biogen is 90-95% biodegradable over a 30 day period. The naturally high viscosity index of this product provides a wide viscosity range, making it a universal replacement in a variety of equipment.
Grade 68Viscosity ( Typical cSt @ 40oC) 68Viscosity ( Typical cSt @ 100oC) 14.5
APPLICATION
Use in the majority of hydraulic systems in earthmoving equipment, machine tools, forklifts, presses, rams and extruders. Hyplex Biogen 68 is of a particular advantage when used in environmently sensitive areas, such as in construction and earthmoving around waterways. Due to its natural base and its wide viscosity range this oil is ideal for use in a variety of machines.
STANDARDS
Meets or exceeds the following: • Denison HF-0 when used in T6H20C pump test
CONTAINER SIZES
205 Litres, 20 Litres. CONTACT
PROLUBE Lubricants,
P.O. Box 5435, Telephone: (07) 3881.1733 15 Pinacle St, Brendale, Qld. 4500.
Fax: Email: Internet:
(07) 3881.1708 [email protected] www.prolube.com.au
Issue Date 13/12/12
PRODUCT INFORMATION SHEET
Product Name: HYPLEX BIOGEN SERIES (BIODEGRADABLE HYDRAULIC OIL)
PRODUCT
Prolube HYPLEX BIOGEN is a canola based hydraulic oil blended with a thermally stable ashless additive package, which inhibits oxidation, protects bearings from corrosion and prevents wear. Hyplex BIOGEN provides excellent performance in extremes of temperature and working conditions. Hyplex Biogen is 90-95% biodegradable over a 30 day period. The naturally high viscosity index of this product provides a wide viscosity range, making it a universal replacement in a variety of equipment.
Grade 68 36Viscosity ( Typical cSt @ 40oC) 68 36Viscosity ( Typical cSt @ 100oC) 14.5 8.5Viscosity Index 225 226Pour Point oC -6 -6
APPLICATION
Use in the majority of hydraulic systems in earthmoving equipment, machine tools, forklifts, presses, rams and extruders. Hyplex Biogen is of a particular advantage when used in environmently sensitive areas, such as in construction and earthmoving around waterways. Due to its natural base and its wide viscosity range this oil is ideal for use in a variety of machines.
STANDARDS
Meets or exceeds the following: • Denison HF-0 when used in T6H20C pump test
CONTAINER SIZES
205 Litres, 20 Litres. CONTACT
PROLUBE Lubricants,
P.O. Box 5435, Telephone: (07) 3881.1733 15 Pinacle St, Brendale, Qld. 4500.
Fax: Email: Internet:
(07) 3881.1708 [email protected] www.prolube.com.au
Issue Date 13/12/12
PRODUCT INFORMATION SHEET
Product Name: HYPLEX H SERIES ISO 22, 32, 46, 68, 100 (EXTENDED VISCOSITY INDEX HYDRAULIC OILS)
PRODUCT
Prolube Hyplex H Series Hydraulic Oils are blended from high quality virgin base oils and special additive packages which give superior protection against oxidation, wear and corrosion. These oils have a very high viscosity index, which prevents thinning out at high temperatures and makes them eminently suitable for all types of hydraulic equipment working under extreme conditions. Prolube Hyplex H Series Hydraulic Oils contain zinc antiwear additives. In addition to meeting all major global hydraulic performance specifications, Hyplex H
Series Oils reduce wear, valve sticking, metal transfer and filterability issues; handles more demanding duty cycles (e.g., with continuous production or in continuous service of leased equipment); and resists oil degradation at higher operating temperatures.
Grade 22 32 46 68 100 Viscosity ( Typical cSt @ 40oC) 22 32 46 68 100 Viscosity ( Typical cSt @ 100oC) 4.7 6 7.8 10.1 13.5 Viscosity Index Specific Gravity @ 15.6° C/15.6° C
ASTM D 1298
136
0.853
136 0,872
139 0.879
136 0.868
139 0.874
Copper Strip Corrosion ASTM D 130, 3 hrs @ 100° C -------------- 1B --------------
Rust Characteristics Proc B ASTM D 665 ---------------- Pass ---------------
Pour Point, °C -30 -27 -25 -25 -24 FZG 4-Square Load Support
DIN 51354 -------------- 12 ---------------- APPLICATION
Use in the majority of hydraulic systems in earthmoving equipment, machine tools, forklifts, presses, rams and extruders or whenever the following specifications are required. (Do NOT use in hydraulic equipment with silver bearing surfaces - in this case use zinc free Hyplex ZF Series Oils)
STANDARDS
Meets or exceeds the following: • Eaton Brochure 694 for 35VQ25A (formerly Vickers I-286-S, M-2950-S) • DIN 51524, Part 2 (HLP) and Part 3 (HVLP) • Cincinnati Milacron P.68, P.69, P.70. • Denison HF-1, HF-2, HF-0 • ISO 11158 Categories HM and HV • General Motors LS2 • ASTM D6158 Type HM and HV • AFNORE NF E 48-603 HM and HV.
Page 1
STANDARDS (Continued)
• Commercial Hydraulics except those with silver bearing surfaces. • Racine variable volume vane pumps.
CONTAINER SIZES
205 Litres, 20 Litres, 1000 l IBCs, Bulk (Some grades not available in all sizes)
CONTACT
PROLUBE Lubricants,
P.O. Box 5435, Telephone: (07) 3881.1733 15 Pinacle St, Brendale, Qld. 4500.
Fax: Email: Internet:
(07) 3881.1708 [email protected] www.prolube.com.au
Issue Date 26/6/12
Page 2
PRODUCT INFORMATION SHEET
Product Name: HYPLEX H SERIES ISO 22, 32, 46, 68, 100 (EXT ENDED VISCOSIT Y INDEX HYDRAULIC OILS)
PRODUCT
Prolube Hyplex H Series Hydraulic Oils are blended from high quality virgin base oils and special additive packages which give superior protection against oxidation, wear and corrosion. These oils have a very high viscosity index, which prevents thinning out at high temperatures and makes them eminently suitable for all types of hydraulic equipment working under extreme conditions. Prolube Hyplex H Series Hydraulic Oils contain zinc antiwear additives.
Grade 22 32 46 68 100 Viscosity ( Typical cSt @ 40oC) 22 32 46 68 100 Viscosity ( Typical cSt @ 100oC) 4.7 6 7.8 10.1 13.5
APPLICATION
Use in the majority of hydraulic systems in earthmoving equipment, machine tools, forklifts, presses, rams and extruders or whenever the following specifications are required. (Do NOT use in hydraulic equipment with silver bearing surfaces - in this case use zinc free Hyplex ZF Series Oils)
STANDARDS
Meets or exceeds the following: • Eaton Brochure 694 for 35VQ25A (formerly Vickers I-286-S, M-2950-S) • DIN 51524, Part 2 (HLP) and Part 3 (HVLP) • Cincinnati Milacron P.68, P.69, P.70. • Denison HF-1, HF-2, HF-0 • ISO 11158 Categories HM and HV • General Motors LS2 • ASTM D6158 Type HM and HV • AFNORE NF E 48-603 HM and HV. • Commercial Hydraulics except those with silver bearing surfaces. • Racine variable volume vane pumps.
CONTAINER SIZES
205 Litres, 20 Litres, 1000 l IBCs, Bulk (Some grades not available in all sizes
CONTACT
PROLUBE Lubricants,
P.O. Box 5435, Telephone: (07) 3881.1733 15 Pinacle St, Fax: (07) 3881.1708 Brendale, Qld. 4500. Email: [email protected] Internet: www.prolube.com.au
Issue Date 26/6/12
PRODUCT INFORMATION SHEET
Product Name: HYPLEX S SERIES ISO 22, 32, 46, 68, 100 (ANTIWEAR HYDRAULIC OILS)
PRODUCT
Prolube Hyplex S Series Hydraulic Oils are blended from HVI virgin base stocks and contain a special thermally stable additive (ZDDP) which inhibits oxidation, protects bearings from corrosion and prevents wear. Hyplex S Series Oil provides excellent performance in vane pumps and high-pressure systems. It caters for most hydraulic equipment, such as machine tools, earthmoving equipment, forklifts, hydraulic presses, rams and extruders. In addition to meeting all major global hydraulic performance specifications, Hyplex S Series Oils reduce wear, valve sticking, metal transfer and filterability issues; handles more demanding duty cycles (e.g., with continuous production or in continuous service of leased equipment); and resists oil degradation at higher operating temperatures.
Grade 22 32 46 68 100 Viscosity ( Typical cSt @ 40oC) 22 32 46 68 100 Viscosity ( Typical cSt @ 100oC) 4.2 5.6 7.1 8.8 11.4 Viscosity Index Specific Gravity @ 15.6° C/15.6° C
ASTM D 1298
101
0.853
101 0,872
101 0.879
101 0.868
101 0.874
Copper Strip Corrosion ASTM D 130, 3 hrs @ 100° C -------------- 1B --------------
Rust Characteristics Proc B ASTM D 665 ---------------- Pass ---------------
Pour Point, °C -30 -27 -25 -25 -24 FZG 4-Square Load Support
DIN 51354 -------------- 12 ---------------- APPLICATION
Use in the majority of hydraulic systems in earthmoving equipment, machine tools, forklifts, presses, rams and extruders or whenever the following specifications are required. (Do NOT use in hydraulic equipment with silver bearing surfaces - in this case use zinc free Hyplex ZF Series Oils)
STANDARDS
Meets or exceeds the following: • Eaton Brochure 694 for 35VQ25A (formerly Vickers 1-286-S, M-2950-S.) • DIN 51524, Part 2 (HLP) & Part 3 (HVLP). • Denison HF-1, HF-2, HF-0. • Commercial Hydraulics except those with silver bearing surfaces. • General Motors LS -2. • AFNOR NF E 48-603 HM and HV • Racine variable volume vane pumps. • Cincinnati Milacron P.68, P.69, P.70.
Page 1
CONTAINER SIZES
205 Litres, 60 Litres, 20 Litres, 5 Litres. 1000 l IBCs, Bulk
(Some grades not available in all sizes)
CONTACT
PROLUBE Lubricants,
P.O. Box 5435, Telephone: (07) 3881.1733 15 Pinacle St, Brendale, Qld. 4500.
Fax: Email: Internet:
(07) 3881.1708 [email protected] www.prolube.com.au
Issue Date 26/6/12
Page 2
PRODUCT INFORMATION SHEET
Product Name: HYPLEX S SERIES ISO 22, 32, 46, 68, 100 (ANTIWEAR HYDRAULIC OILS)
PRODUCT
Prolube Hyplex S Series Hydraulic Oils are blended from HVI virgin base stocks and contain a special thermally stable additive (ZDDP) which inhibits oxidation, protects bearings from corrosion and prevents wear. Hyplex S Series Oil provides excellent performance in vane pumps and high-pressure systems. It caters for most hydraulic equipment, such as machine tools, earthmoving equipment, forklifts, hydraulic presses, rams and extruders.
Grade 22 32 46 68 100 Viscosity ( Typical cSt @ 40oC) 22 32 46 68 100 Viscosity ( Typical cSt @ 100oC) 4.2 5.6 7.1 8.8 11.4
APPLICATION
Use in the majority of hydraulic systems in earthmoving equipment, machine tools, forklifts, presses, rams and extruders or whenever the following specifications are required. (Do NOT use in hydraulic equipment with silver bearing surfaces - in this case use zinc free Hyplex ZF Series Oils)
STANDARDS
Meets or exceeds the following: • Eaton Brochure 694 for 35VQ25A (formerly Vickers 1-286-S, M-2950-S.) • DIN 51524, Part 2 (HLP) & Part 3 (HVLP). • Denison HF-1, HF-2, HF-0. • Commercial Hydraulics except those with silver bearing surfaces. • General Motors LS -2. • AFNOR NF E 48-603 HM and HV • Racine variable volume vane pumps. • Cincinnati Milacron P.68, P.69, P.70.
CONTAINER SIZES
205 Litres, 60 Litres, 20 Litres, 5 Litres. 1000 l IBCs, Bulk
(Some grades not available in all sizes)
CONTACT
PROLUBE Lubricants,
P.O. Box 5435, Telephone: (07) 3881.1733 15 Pinacle St, Brendale, Qld. 4500.
Fax: Email: Internet:
(07) 3881.1708 [email protected] www.prolube.com.au
Issue Date 26/6/12
PRODUCT INFORMATION SHEET
Product Name: HYPLEX SPINDLE OIL ISO 10 PRODUCT
Prolube Hyplex Spindle Oil is blended from HVI virgin base stocks and contains a special thermally stable additive (ZDDP) which inhibits oxidation, protects bearings from corrosion and prevents wear. Hyplex Spindle Oil is specially formulated to provide excellent protection against Rust and Oxidation.
Grade 10Viscosity ( Typical cSt @ 40oC) 9.5Viscosity ( Typical cSt @ 100oC) 2.6
APPLICATION
Prolube Hyplex Spindle Oil provides excellent performance in high speed bearings, machine tool spindles and some high performance hydraulics.
STANDARDS
Meets or exceeds the following: • DIN 51524, Part 2 (HLP) & Part 3 (HVLP). • Denison HF-1, HF-2, HF-0. • Cincinnati Milacron P.62
CONTAINER SIZES
205 Litres, 20 Litres CONTACT
PROLUBE Lubricants,
P.O. Box 5435, Telephone: (07) 3881.1733 15 Pinacle St, Brendale, Qld. 4500.
Fax: Email: Internet:
(07) 3881.1708 [email protected] www.prolube.com.au
Issue Date 26/6/12
PRODUCT INFORMATION SHEET
Product Name: HYPLEX TD SERIES ISO 22, 32, 46, 68, 100 (ANTIWEAR HYDRAULIC OILS WITH TRACER DYE)
PRODUCT
Prolube Hyplex TD Series Hydraulic Oils are blended from HVI virgin base stocks and contain a special thermally stable additive (ZDDP) which inhibits oxidation, protects bearings from corrosion and prevents wear. Hyplex TD Series Oils provides excellent performance in vane pumps and high-pressure systems. It caters for most hydraulic equipment, such as machine tools, earthmoving equipment, forklifts, hydraulic presses, rams and extruders. Hyplex TD Series Oils also include a Tracer Dye to assist in tracing leaks or spills.
Grade 22 32 46 68 100 Viscosity ( Typical cSt @ 40oC) 22 32 46 68 100 Viscosity ( Typical cSt @ 100oC) 4.2 5.6 7.1 8.8 11.4
APPLICATION
Use in the majority of hydraulic systems in earthmoving equipment, machine tools, forklifts, presses, rams and extruders or whenever the following specifications are required. (Do NOT use in hydraulic equipment with silver bearing surfaces - in this case use zinc free Hyplex ZF Series Oils). Any leaks of this product are very clearly visible if examined using an high intensity Ultra Violet light.
STANDARDS
Meets or exceeds the following: • Eaton Brochure 694 for 35VQ25A (formerly Vickers 1-286-S, M-2950-S.) • DIN 51524, Part 2 (HLP) & Part 3 (HVLP). • Denison HF-1, HF-2, HF-0. • Commercial Hydraulics except those with silver bearing surfaces. • General Motors LS -2. • AFNOR NF E 48-603 HM and HV • Racine variable volume vane pumps. • Cincinnati Milacron P.68, P.69, P.70.
CONTAINER SIZES
205 Litres, 20 Litres CONTACT
PROLUBE Lubricants,
P.O. Box 5435, Telephone: (07) 3881.1733 15 Pinacle St, Brendale, Qld. 4500.
Fax: Email: Internet:
(07) 3881.1708 [email protected] www.prolube.com.au
Issue Date 17/7/14
PRODUCT INFORMATION SHEET
Product Name: HYPLEX ZF SERIES ISO 22, 32, 46, 68, 100 (ZINC FREE HYDRAULIC OILS)
PRODUCT
Prolube Zinc Free Hydraulic Oils are blended from high quality virgin base stocks and special additives that allow their use in hydraulic systems, which have equipment with silver bearing surfaces. These oils contain anti-corrosion, anti-oxidant and antiwear additives and provide high resistance to thickening in service. They are totally zinc-free.
Grade 22 32 46 68 100 Viscosity ( Typical cSt @ 40oC) 22 32 46 68 100 Viscosity ( Typical cSt @ 100oC) 4.7 6.0 7.8 10.1 13.5
APPLICATION
Use in all hydraulic systems and, in particular, in hydraulic systems with components with silver bearing surfaces that are vulnerable to attack from standard hydraulic oils.
STANDARDS
Meets or exceeds the following: • DIN 51524, Part 1 (HL). • DIN 51517 Part 2 (CL). • Denison HF-1, HF-2, HF-0. • Lee Norse 100-1. • Jeffrey No.87 • Ford M-6C32. • US Steel 120 136, 127. • B.F.Goodrich 0152. • Vickers 1-286-S, M-2950-S. • General Motors LH-04-1, LH-06-1, LH-15-1. • AFNORE NF-E 48-603 • Racine variable volume vane pumps. • Cincinnati Milacron P38, P55, P54, P57, P62
CONTAINER SIZES
205 Litres, 20 Litres. CONTACT
PROLUBE Lubricants,
P.O. Box 5435, Telephone: (07) 3881.1733 15 Pinacle St, Brendale, Qld. 4500.
Fax: Email: Internet:
(07) 3881.1708 [email protected] www.prolube.com.au
Issue Date 16/1/2014
PRODUCT INFORMATION SHEET
Product Name: INTEC SERIES ISO 150, 220, 320, 460, 680 (INDUSTRIAL GEAR OILS)
PRODUCT
Prolube Intec 150, 220, 320 and 460 are industrial gear oils that are blended from high quality virgin oil stocks together with the finest gear oil additives. They have outstanding thermal stability and provide excellent protection against corrosion. These oils have excellent load carrying and antiwear characteristics, are resistant to foaming and have good water separation properties.
Grade 150 220 320 460 680 Viscosity ( Typical cSt @ 40oC) 150 220 320 460 680 Viscosity ( Typical cSt @ 100oC) 15.2 19.8 25.3 31.4 38.4
APPLICATION
These oils are designed for a wide range of applications in industrial gear systems especially for steel on steel spur, helical and bevel gearing of all sizes. The viscosity choice will depend on speed, loading and surface finish of the gears.
STANDARDS
Meets or exceeds the following: • us steel: 224 • AGMA: 250.04 • Cincinnati Milacron
CONTAINER SIZES
205 Litres, 20 Litres. CONTACT
PROLUBE Lubricants,
P.O. Box 5435, Telephone: (07) 3881.1733 15 Pinacle St, Brendale, Qld. 4500.
Fax: Email: Internet:
(07) 3881.1708 [email protected] www.prolube.com.au
Issue Date 16/1/2014
PRODUCT INFORMATION SHEET
Product Name: INTEC INDUSTRIAL GEAR OIL SERIES ISO 68, 150, 220, 320, 460, 680
PRODUCT
Prolube Intec 68, 150, 220, 320, 460 and 680 are industrial gear oils that are blended from high quality virgin oil stocks together with the finest gear oil additives. They have outstanding thermal stability and provide excellent protection against corrosion. The high quality base oils provide excellent oxidation resistance resulting in extended oil life and reduced oil consumption.
Grade 68 150 220 320 460 680 Viscosity ( Typical cSt @ 40oC) 68 150 220 320 460 680 Viscosity ( Typical cSt @ 100oC) 8.9 15.4 20.0 25.4 31.4 38.5
APPLICATION
Intec Industrial Gear Oils are suitable for a wide range of applications in industry and mining where a mild EP gear oil is specified.
STANDARDS
Meets or exceeds the following: uS Steel: 224 AGMA: 250.04
Cincinnati Milacron. .
CONTAINER SIZES
205 Litres, 20 Litres
. CONTACT
PROLUBE Lubricants,
P.O. Box 5435, Telephone: (07) 3881.1733 15 Pinacle St, Brendale, Qld. 4500.
Fax: Email: Internet:
(07) 3881.1708 [email protected] www.prolube.com.au
Issue Date 8/11/12
PRODUCT INFORMATION SHEET
Product Name: INTEC TURBINE OIL PRODUCT
Prolube Intec Series Turbine Oils are blended from highly refined thermally stable base oils and special additive packages which give superior protection against oxidation, wear and corrosion. This additive system also provides excellent water and air separation, to ensure reliable operation with minimal foaming and emulsification.
Grade 46 68Viscosity ( Typical cSt @ 40oC) 46 68Viscosity ( Typical cSt @ 100oC) 7.8 10.1
APPLICATION
Intec Turbine Oil can be used widely in steam turbines and hydroturbines with splash, bath and ring-oiling arrangements, and all other continuous circulation methods involving pumps, valves and ancillary equipment. This product series is recommended for continous service in the lubrication of plain and rolling bearings and parallel shaft gearing.
STANDARDS
• Parker Denison HF-1 • MAG IAS P-38 • MAG IAS P-54 • MAG IAS P-55 • MAG IAS P-57 • DIN 51524 PART 1 • MIL-PRF-17672E • AFNOR E48-600 HL
CONTAINER SIZES
205 Litres, 60 Litres, 20 Litres, 5 Litres. CONTACT
PROLUBE Lubricants,
P.O. Box 5435, Telephone: (07) 3881.1733 15 Pinacle St, Brendale, Qld. 4500.
Fax: Email: Internet:
(07) 3881.1708 [email protected] www.prolube.com.au
Issue Date 5/7/12
PRODUCT INFORMATION SHEET
Product Name: J·FLEET 15W40 PRODUCT
Prolube J-Fleet 15W40 has been formulated using premium and new generation base oils and the most recent additive technology to meet the latest CI-4 performance requirements. J-Fleet 15W40 provides optimum protection for control of corrosive wear, low and high temperature stability, soot handling, piston deposit control, oxidation and viscosity loss to due to shear.
Viscosity Typical 14.5 cSt @ 100oC APPLICATION
All types of diesel engines including electronically controlled and high speed turbocharged models and those using emission control technologies, in order to meet current exhaust emission standards.
STANDARDS
Meets or exceeds the following: SAE Grade: 15W40 API CI-4 SL JASO DH-1 ACEA: E7-08 A3/B3/B4-08 CUMMINS CES 20076, 77, 78 Mercedes MB.228.3 / 229.1 Volvo VDS 3 Mack EO-M PLUS MTU Type 2 Allison C4 Caterpillar ECF-1a Renault RLD/RLD2 MAN 3275 Deutz DQC III Global DHD 1.
CONTAINER SIZES
205 Litres, 20 Litres, 5 Litres.
CONTACT
PROLUBE Lubricants,
P.O. Box 5435, Telephone: (07) 3881 1733 15 Pinacle Street, Fax: (07) 3881 1708 Brendale, Qld. 4500. Email: admin@prolube .com.au Internet: www.prolube.com.au
Issue Date 9/1/2014
PRODUCT INFORMATION SHEET
Product Name: MARINA 30 PRODUCT
Prolube Marina 40 is an SAE 40 grade oil developed for traditional marine main propulsion and auxiliary trunk piston diesel engines operating in severe service conditions using lower quality distillate fuels with sulphur content up to 1 %.
Viscosity Typical 11.7 cSt @ 100oc TBN 14.0
APPLICATION
Designed for engines, transmissions and hydraulic systems where an SAE 30 monograde oil is specified or indicated. It is particularly suitable for marine main propulsion and auxiliary trunk piston diesel engines.
STANDARDS
Meets or exceeds the following: SAE Grade: 30 API: cF
.
CONTAINER SIZES
205 Litres.
CONTACT
PROLUBE Lubricants,
P.O. Box 5435, Telephone: (07) 3881.1733 15 Pinacle St, Brendale, Qld. 4500.
Fax: Email: Internet:
(07) 3881.1708 admin@prolube .com.au www.prolube.com.au
Issue Date 26/6/2012
PRODUCT INFORMATION SHEET
Product Name: MARINA 40 PRODUCT
Prolube Marina 40 is an SAE 40 grade oil developed for traditional marine main propulsion and auxiliary trunk piston diesel engines operating in severe service conditions using lower quality distillate fuels with sulphur content up to 1 %.
Viscosity Typical 14.8 cSt @ 100oc TBN 14.0
APPLICATION
Designed for engines, transmissions and hydraulic systems where an SAE 40 monograde oil is specified or indicated. It is particularly suitable for marine main propulsion and auxiliary trunk piston diesel engines.
STANDARDS
Meets or exceeds the following: SAE Grade: 40 API: cF
.
CONTAINER SIZES
205 Litres.
CONTACT
PROLUBE Lubricants,
P.O. Box 5435, Telephone: (07) 3881.1733 15 Pinacle St, Brendale, Qld. 4500.
Fax: Email: Internet:
(07) 3881.1708 admin@prolube .com.au www.prolube.com.au
Issue Date 26/6/2012
PRODUCT INFORMATION SHEET
Product Name: MAXIFLEET 15W40 CG·4 SL PRODUCT
Prolube Maxifleet 15W40 is very shear stable, provides excellent protection against wear, corrosion and oxidisation and ensures a high degree of engine cleanliness. It is suitable for naturally aspirated and turbo-charged diesel and petrol engines including those running on unleaded petrol.
APPLICATION
Designed for 4 Stroke motors using ULP, PULP, LPG and Diesel fuels where a 15W40 engine oil is specified or indicated. It is specifically designed for pre-1997 North American-style diesel motors requiring low ash engine oils. The primary recommendation is for mixed fleet operations.
STANDARDS
Meets or exceeds the following: SAE Grade: 15W40 API: CG-4 SL Mack: EO-L MTU Type 2 ACEA: E2/A3/B4 Volvo VDS MAN M3275 Mercedes Benz 228.3/229.1
CONTAINER SIZES
Bulk, 205 Litres, 60 Litres, 20 Litres, 5 Litres.
CONTACT
PROLUBE Lubricants,
P.O. Box 5435, Telephone: (07) 3881.1733 15 Pinacle St, Brendale, Qld. 4500.
Fax: Email: Internet:
(07) 3881.1708 admin@prolube .com.au www.prolube.com.au
Issue Date 26/6/2012
PRODUCT INFORMATION SHEET
Product Name: MONOTEC 30 CD SF PRODUCT
Prolube Monotec 30 is a SAE 30 oil originally developed to meet the Caterpillar Series 3 and Alison C3 requirements. It is recommended also for use in GM Detroit diesel engines, which require oil with a low sulphated ash residue. It can be used in petrol and diesel engines where monograde oil is preferred. It can be used also as hydraulic oil for earthmoving machinery.
Viscosity Typical 11.5 cSt @ 100oC
APPLICATION
Designed for engines, transmissions and hydraulic systems where SAE 30 monograde oil is specified or indicated. It is particularly suitable for older style diesel motors that may react unfavourably to modern, multigrade engine oils. Its primary recommendation is as a running-in oil for rebuilt and reconditioned petrol and diesel motors subject to manufacturer's specification.
STANDARDS
Meets or exceeds the following: SAE Grade: SAE 30 API: CD SF
CONTAINER SIZES
205 Litres, 60 Litres, 20 Litres, 5 Litres. CONTACT
PROLUBE Lubricants,
P.O. Box 5435, Telephone: (07) 3881.1733 15 Pinacle St, Brendale, Qld. 4500.
Fax: Email: Internet:
(07) 3881.1708 admin@prolube .com.au www.prolube.com.au
Issue Date 18/4/13
PRODUCT INFORMATION SHEET
Product Name: MONOTEC 40 CD SF PRODUCT
Prolube Monotec 40 is a SAE 40 oil originally developed to meet the Caterpillar Series 3 and Alison C3 requirements. It is recommended also for use in GM Detroit diesel engines, which require oil with a low sulphated ash residue. It can be used in petrol and diesel engines where monograde oil is preferred. It can be used also as hydraulic oil for earthmoving machinery.
Viscosity Typical 14.5 cSt @ 100oC
APPLICATION
Designed for engines, transmissions and hydraulic systems where SAE 40 monograde oil is specified or indicated. It is particularly suitable for older style diesel motors that may react unfavourably to modern, multigrade engine oils. Its primary recommendation is as a running-in oil for rebuilt and reconditioned petrol and diesel motors subject to manufacturer's specification.
STANDARDS
Meets or exceeds the following: SAE Grade: SAE 40 API: CD SF
CONTAINER SIZES
205 Litres, 60 Litres, 20 Litres, 5 Litres. CONTACT
PROLUBE Lubricants,
P.O. Box 5435, Telephone: (07) 3881.1733 15 Pinacle St, Brendale, Qld. 4500.
Fax: Email: Internet:
(07) 3881.1708 admin@prolube .com.au www.prolube.com.au
Issue Date 18/4/13
PRODUCT INFORMATION SHEET
Product Name: MONOTEC 50 CD SF PRODUCT
Prolube Monotec 50 CD SF is an economical monograde engine oil which provides all-round protection for Diesel engines in moderate conditions. It is particularly suitable for use in older model vehicles and helps to reduce oil consumption.
Viscosity Typical 19.0 cSt @ 100oC
APPLICATION
Designed for engines and transmissions where an SAE 50 monograde oil is specified or indicated. It is particularly suitable for older style motors that may react unfavourably to modern, multigrade engine oils.
STANDARDS
Meets or exceeds the following: SAE Grade: SAE 50 API: CD SF
CONTAINER SIZES
205 Litres, 20 Litres CONTACT
PROLUBE Lubricants,
P.O. Box 5435, Telephone: (07) 3881.1733 15 Pinacle St, Brendale, Qld. 4500.
Fax: Email: Internet:
(07) 3881.1708 admin@prolube .com.au www.prolube.com.au
Issue Date 26/6/2012
PRODUCT INFORMATION SHEET
Product Name: MONOTEC GMX 30 SAE 40 CF·2 PRODUCT
Prolube Monotec GMX 30 is a monograde SAE 30 oil designed for high speed older style diesel engines which require high detergency and good antiwear and soot carry capacity, to maintain peak performance and maximise engine life.
Viscosity Typical 11.5 cSt @ 100oC
APPLICATION
Monotec GMX30 is suitable for use in naturally aspirated diesel engines, petrol engines and hydraulics of earthmoving equipment working under particularly hot conditions. This product can be used in engines requiring an API CF or CF-2 type oil.
STANDARDS
Meets or exceeds the following: SAE Grade: SAE 30 API: CF, CF-2, SG
CONTAINER SIZES
205 Litres, 20 Litres CONTACT
PROLUBE Lubricants,
P.O. Box 5435, Telephone: (07) 3881.1733 15 Pinacle St, Brendale, Qld. 4500.
Fax: Email: Internet:
(07) 3881.1708 admin@prolube .com.au www.prolube.com.au
Issue Date 20/3/14
PRODUCT INFORMATION SHEET
Product Name: MONOTEC GMX 40 SAE 40 CF·2 PRODUCT
Prolube Monotec GMX 40 is a monograde SAE 40 oil developed specifically for General Motors' two-stroke Detroit Diesel Engines.
Viscosity Typical 15.3 cSt @ 100oC
APPLICATION
Developed for General Motors 2-stroke Detroit Diesel Engines and suitable for use in naturally aspirated diesel engines, petrol engines and hydraulics of earthmoving equipment working under particularly hot conditions.
STANDARDS
Meets or exceeds the following: SAE Grade: SAE 40 API: CF, CF-2, SG
CONTAINER SIZES
205 Litres, 60 litres, 20 Litres CONTACT
PROLUBE Lubricants,
P.O. Box 5435, Telephone: (07) 3881.1733 15 Pinacle St, Brendale, Qld. 4500.
Fax: Email: Internet:
(07) 3881.1708 admin@prolube .com.au www.prolube.com.au
Issue Date 20/3/14
PRODUCT INFORMATION SHEET
Product Name: MONOTEC GMX 50 SAE 50 CF·2 PRODUCT
Prolube Monotec GMX 50 CF-2 is a monograde engine oil which provides all-round protection for Diesel engines in moderate conditions. It is particularly suitable for use in older model vehicles and helps to reduce oil consumption.
Viscosity Typical 19.0 cSt @ 100oC
APPLICATION
Designed for engines and transmissions where an SAE 50 monograde oil is specified or indicated. It is particularly suitable for older style motors that may react unfavourably to modern, multigrade engine oils. Monotec GMX50 is also suitable for use in General Motors 2-stroke Detroit Diesel Engines that require higher viscosity oil.
STANDARDS
Meets or exceeds the following: SAE Grade: SAE 50 API: CF-2
CONTAINER SIZES
205 Litres, 20 Litres CONTACT
PROLUBE Lubricants,
P.O. Box 5435, Telephone: (07) 3881.1733 15 Pinacle St, Brendale, Qld. 4500.
Fax: Email: Internet:
(07) 3881.1708 admin@prolube .com.au www.prolube.com.au
Issue Date 26/6/2012
Appearance Density, Kg/Lt at 15oC
Visual D.1298
Brown 0.891
Viscosity, cSt at 40oC D.445 206 at 100oC D.445 19.0
Viscosity Index Flash Point, PM Closed,oC Pour Point, oC
D.2270D.93 D.97
103 >220 -20
Ash, Sulphated % Mass D.482 0.95 TBN mgKOH/g D874 0.96 Zinc, % mass 0.102 Sulphur, % Mass D.129 0.343 Phosphorus, % Mass D.1091 0.092 Nitrogen, % Mass Kjeldahl 0.069 Calcium, % Mass Proprietary 0.233
TYPICAL TEST ASTM METHOD
SAE 50
PRODUCT INFORMATION SHEET
Product Name: MOP - GRANULATED ABSORBANT PRODUCT
MOP is a calcined diatomaceous earth absorbent used for clean up of spilt lubricants, fuels and other chemicals. MOP has a high surface area and minute pore spaces and can hold up to its own weight in liquid. It is also excellent as a pet litter, soil conditioner, potting mix and oil and beverage clarifying.
APPLICATION
Spread over the spill, leave for a few minutes until all the liquid is absorbed, then sweep up and dispose of contained spillage according to regulations. To absorb odours in garbage tins, ashtrays and fridges, spread small quantity in the enclosed space.
CONTAINER SIZES
35 Litre Bags. CONTACT
PROLUBE Lubricants,
P.O. Box 5435, Telephone: (07) 3881 1733 15 Pinacle Street, Fax: (07) 3881 1708 Brendale, Qld. 4500. Email: admin@prolube .com.au Internet: www.prolube.com.au
Issue Date 9/1/2014
PRODUCT INFORMATION SHEET
Product Name: MULTITEC 10W40 SM CF Semi-synthetic, Premium Engine Oil
PRODUCT
Prolube Multitec 10W40 SM CF is a latest generation semi-synthetic ,multi- application engine oil using the latest additive technology to provide excellent performance in late model petrol and diesel engines. It provides the performance reserve required for oil in modern technology, late model, high stress applications. It provides the maximum protection against wear, corrosion, oxidisation and sludge formation and it gives superior protection where vehicles encounter lower temperature operation with cold starts.
Viscosity Typical 13.1 cSt @ 100oC
APPLICATION
This oil is designed for most modern petrol and diesel engines, both naturally aspirated and turbocharged. It is particularly suitable for multi-valve multi-cam models requiring lower viscosity oil for fuel economy, low emissions and high performance. It is also well suited to four stroke motor cycles with wet clutches. This product may not be suitable for modern diesel engines fitted with diesel particulate filters (DPFs).
STANDARDS
Meets or exceeds the following: SAE Grade: 10W40 API: SM CF ACEA: A3 / B4-04 MB 229.1 VW 50500
. CONTAINER SIZES
Bulk, 205 Litres, 20 Litres, 5 Litres.
CONTACT
PROLUBE Lubricants,
P.O. Box 5435, Telephone: (07) 3881.1733 15 Pinacle St, Brendale, Qld. 4500.
Fax: Email: Internet:
(07) 3881.1708 admin@prolube .com.au www.prolube.com.au
Issue Date 20/3/14
PRODUCT INFORMATION SHEET
Product Name: OPE· 2 STROKE ENGINE OIL AIR COOLED OUTDOOR POWER EQUIPMENT
PRODUCT
Prolube OPE-2 is a semi synthetic lubricating oil blended for mixing with petrol for fuelling air-cooled 2 stroke motors. It has been formulated with high quality base stock and a special low ash additive pack to reduce buildup on spark plugs and pistons.
Viscosity Typical 9.7 cSt @ 100oc
APPLICATION
Designed for air-cooled 2 stroke motors in outdoor power equipment including lawn mowers, brushcutters, chain saw motors, motorcycles and air-cooled marine outboard motors. Mix with petrol fuel as per equipment manufacturers' recommendations.
It is not recommended for high performance water-cooled marine outboard motors (use Promarine TcW-3 Outboard Engine Oil).
STANDARDS
Meets or exceeds the following: JASO: FA, FB, FC, FD ISO-L-EGB, ISO-L-EGC, ISO-L-EGD API: TC Piaggio Hexagon
CONTAINER SIZES
205 Litres, 20 Litres, 5 Litres, 1 Litres.
CONTACT
PROLUBE Lubricants,
P.O. Box 5435, Telephone: (07) 3881 1733 15 Pinacle Street, Brendale, Qld. 4500.
Fax: Email: Internet:
(07) 3881 1708 admin@prolube .com.au www.prolube.com.au
Issue Date 9/1/2014
PRODUCT INFORMATION SHEET
Product Name: OPE - 4 STROKE ENGINE OIL (SAE30 SF OUTDOOR POWER EQUIPMENT)
PRODUCT
Prolube OPE-4 is a monograde SAE30 SF oil with a red dye identifier, originally designed to meet Briggs and Stratton requirements for their 4-stroke air-cooled motors fitted in various outdoor power equipment applications.
Viscosity Typical 11.5 cSt @ 100oc APPLICATION
Designed for outdoor power equipment motors where SAE 30 monograde oil isspecified or indicated. It is particularly suitable for air-cooled 4-stroke motors that may react unfavourably to modern, multigrade engine oils.
STANDARDS
Meets or exceeds the following:
SAE Grade: SAE.30 API: SF
.
CONTAINER SIZES
205 Litres, 20 Litres, 5 Litres, 1 Litre. CONTACT
PROLUBE Lubricants,
P.O. Box 5435, Telephone: (07) 3881 1733 15 Pinacle Street, Brendale, Qld. 4500.
Fax: Email: Internet:
(07) 3881 1708 admin@prolube .com.au www.prolube.com.au
Issue Date 7/11/2013
PRODUCT INFORMATION SHEET
Product Name: OPE · CHAIN 'N' BAR OIL
PRODUCT
Prolube Chain 'N' Bar oil is blended from high quality base oils and extreme pressure and tackifier additives to give the properties required in a lubricant for the guide bars, chains and sprockets of domestic and industrial chain saws with either automatic or manual oilers. This oil has excellent anti-wear characteristics, reducing friction, heat, wear and chain stretch, resists "throw-off" and inhibits corrosion.
Viscosity Typical 14.0 cSt @ 100oG
APPLICATION
Recommended for use in lubricating the bar and chain of all makes of domestic and commercial chain saws.
STANDARDS
Meets requirements of OPE Equipment Manufacturers
.
CONTAINER SIZES
205 Litres, 20 Litres, 5 Litres, 1 Litre.
CONTACT
PROLUBE Lubricants,
P.O. Box 5435,
Telephone:
(07) 3881 1733 15 Pinacle Street, Brendale, Qld. 4500.
Fax: Email: Internet:
(07) 3881 1708 admin@prolube .com.au www.prolube.com.au
Issue Date 31/10/2013
PRODUCT INFORMATION SHEET
Product Name: PARTS CLEANING SOLVENT
PRODUCT
Prolube Parts Cleaning Solvent flash solvent based cleaning fluid for use in parts cleaning units where safety solvent based fluids are recommended. This product does not mix with water.
• Store product in cool area away from direct sunlight • Contains Liquid Hydrocarbons • Flash point above 62°C (PMC).
APPLICATION
For best results, ensure surface is free of water then spray or brush liquid on to surface to be cleaned.
Safety Precautions: Prolonged contact with the skin may cause irritation, wear rubber gloves when handling and avoid contact with skin and eyes.
CONTAINER SIZES
205 Litres, 20 Litres. CONTACT
PROLUBE Lubricants,
P.O. Box 5435, Telephone: (07) 3881 1733 15 Pinacle Street, Brendale, Qld. 4500.
Fax: Email: Internet:
(07) 3881 1708 admin@prolube .com.au www.prolube.com.au
Issue Date 31/10/13
PRODUCT INFORMATION SHEET
Product Name: PETROLEUM JELLY PRODUCT
Prolube Pro Petroleum Jelly is a highly refined white petrolatum that meets the purity standards of the latest issues of the United States Pharmacopoeia (USP) and British Pharmacopoeia (BP). It is a white translucent gel.
Melting Point 50 - 55 oC Typ 53 oC Congealing Point 48 - 52oC Viscosity 5.8 - 6.5 cSt @ 100oC Typ 6.2 oC
APPLICATION
Petroleum Jelly is used as a base for cosmetics, as a skin conditioner and in Cosmetics. It can also be used as a softening agent in some printing inks, as a rubber plasticiser and in leather processing. In industry it can be used as a light duty lubricant, as rust preventive and is an effective water repellent. It is also used to prevent corrosion on battery terminals.
STANDARDS
Petroleum Jelly is manufactured in compliance with USP 31, BP2008, IP2007 and also conforms to the requirements of US FDA 21CFR 172.880.
CONTAINER SIZES
20 kg 2.5kg.
CONTACT
PROLUBE Lubricants,
P.O. Box 5435, Telephone: (07) 3881.1733 15 Pinacle St, Brendale, Qld. 4500.
Fax: Email: Internet:
(07) 3881.1708 admin@prolube .com.au www.prolube.com.au
Issue Date 26/6/2012
PRODUCT INFORMATION SHEET
Product Name: PREMIUM 20W40 SF CD
PRODUCT
Prolube Premium 20W40 is an economy grade suitable for petrol and light diesel engines. It is designed for budget conscious everyday motoring. It provides all round engine protection in moderate conditions. It meets early specifications suitable for running-in applications subject to engine manufacturers' or rebuilders' recommendations.
Viscosity Typical 13.8 cSt @ 100oc
APPLICATION
Designed for petrol and light diesel motors where SF type oil is specified or indicated. This oil is not designed for turbocharged engines or heavy diesel engines.
STANDARDS
Meets or exceeds the following: SAE Grade: 20W40 API: SF cD
.
CONTAINER SIZES
205 Litres, 20 Litres, 5 Litres.
CONTACT
PROLUBE Lubricants,
P.O. Box 5435,
Telephone:
(07) 3881 1733 15 Pinacle Street, Brendale, Qld. 4500.
Fax: Email: Internet:
(07) 3881 1708 admin@prolube .com.au www.prolube.com.au
Issue Date 31/10/2013
PRODUCT INFORMATION SHEET
Product Name: PREMIUM 30W40 SF CD
PRODUCT
Prolube Premium 30W40 is an economy grade suitable for petrol and light diesel engines. It is designed for budget conscious everyday motoring. It provides all round engine protection in moderate conditions. It meets early specifications suitable for running-in applications subject to engine manufacturers' or rebuilders' recommendations.
Viscosity Typical 14.0 cSt @ 100oG
APPLICATION
Designed for petrol and light diesel motors where SF type oil is specified or indicated. This oil is not designed for turbocharged engines or heavy diesel engines.
STANDARDS
Meets or exceeds the following: SAE Grade: 30W40 API: SF GD
.
CONTAINER SIZES
205 Litres, 20 Litres, 5 Litres.
CONTACT
PROLUBE Lubricants,
P.O. Box 5435,
Telephone:
(07) 3881 1733 15 Pinacle Street, Brendale, Qld. 4500.
Fax: Email: Internet:
(07) 3881 1708 admin@prolube .com.au www.prolube.com.au
Issue Date 31/10/2013
PRODUCT INFORMATION SHEET
Product Name: PROCUT NEAT CUTTING FLUID
PRODUCT
Prolube Procut is a heavy-duty straight cutting oil that is blended from highly refined base oils and sulphur and chlorinated wax-type extreme pressure additives. The additives ensure excellent surface finish to machined components and prolonged cutting tool life. It is non staining with excellent rust inhibiting properties and provides good surface finishes.
Viscosity Typical 75 cSt @ 40 oC APPLICATION
Procut can be used for medium and difficult machining of ferrous metals - heavy duty automatic machining, milling, broaching, gear cutting, hobbing, forming cold heading. It is usually used neat for heavy machining but can be diluted with light oil for lighter duty machining operations.
CONTAINER SIZES
205 Litres, 20 Litres. CONTACT
PROLUBE Lubricants,
P.O. Box 5435, Telephone: (07) 3881 1733 15 Pinacle Street, Brendale, Qld. 4500.
Fax: Email: Internet:
(07) 3881 1708 admin@prolube .com.au www.prolube.com.au
Issue Date 6/6/2013
PRODUCT INFORMATION SHEET
Product Name: PROFLUSH
PRODUCT
Prolube Proflush is a concentrated powder form cooling system flush and descaler. Proflush is highly effective in removing oil, grease, sludge, scale and other impurities in radiators or cooling systems. Proflush is buffered for use with aluminium components and contains other corrosion inhibitors to protect reactive metals in the cooling systems. Proflush is non foaming and is economical to use.
APPLICATION
Dissolve 200 grams of Proflush in warm to hot water and add to the cooling system. Leave in the cooling system for at least 30 minutes under normal operating conditions. For best results, leave the mixture in the system for 24 hours under normal operating conditions. Drain the contents of the system and thoroughly flush with clean water. Ensure the cooling system is completely flushed of Proflush. Add a new charge of coolant to the system. Suitable coolants I corrosion inhibitors are Proguard Rei, Proguard Longlife Organic, Proguard XR or Protemp AntifreezeIAntiboil
PROPERTIES
Appearance: White Powder Odour: slight odour pH (4% solution): 11.7 Flammability: Non flammable Solubility in Water: soluble Specific Gravity:n/a
Important: Proflush is strongly alkaline. Avoid contact with skin and eyes. DO NOT leave Proflush in the cooling system for more than 48 hours. Proflush must be completely removed prior to the addition of any new coolant,
CONTAINER SIZES
20 Kilogram Pail CONTACT
PROLUBE Lubricants,
P.O. Box 5435, Telephone: (07) 3881 1733 15 Pinacle Street, Brendale, Qld. 4500.
Fax: Email: Internet:
(07) 3881 1708 admin@prolube .com.au www.prolube.com.au
Issue Date 27/2/2014
PRODUCT INFORMATION SHEET
Product Name: PROGREASE PRODUCT
Prolube Progrease is a general-purpose lithium extreme pressure (EP) grease with anti-wear performance. It has outstanding rust and corrosion protection and excellent resistance to water washout. It is manufactured with a lithium hydroxy- stearate soap base with selected high viscosity index mineral oils combined with rust, oxidation and corrosion inhibitors and very effective lead free extreme pressure additives.
Appearance Light brown, buttery, slightly stringy Worked Penetration 275 mm ASTM D217 Oil Viscosity 180 cSt@40oC Typical Timken OK Load D23 ASTM D2509 4 Ball Weld Test 290 kg ASTM D2596
APPLICATION
Progrease is suitable for use in automotive, marine and industrial applications and is designed for application in heavy-duty plain and rolling bearings operating under the most severe conditions. It is also a general-purpose grease suitable for chassis universal joints and wheel bearings.
The recommended temperature range is from -20 oC to 130 oC, however Progrease may be used at higher temperatures with the lubrication frequency increased accordingly.
STANDARDS
NLGI Grade No 2 CONTAINER SIZES
20 Kg 450 gr Cartridges. CONTACT
PROLUBE Lubricants,
P.O. Box 5435, Telephone: (07) 3881.1733 15 Pinacle St, Fax: (07) 3881.1708 Brendale, Qld. 4500. Email: admin@prolube .com.au Internet: www.prolube.com.au
Issue Date 20/2/2014
PRODUCT INFORMATION SHEET
Product Name: PROGUARD 50 ORGANIC LONGLIFE COOLANT
· 50/50 Premix Blend
PRODUCT
Proguard 50 Organic Long life Coolant is a premium quality anti-boil/anti-freeze pre-mix coolant based on carboxylate technology and contains no silicates, borates, phosphates, nitrates, nitrites or amines. Proguard 50 contains monoethylene glycol and a double corrosion inhibitor package based on organic acid-long life technology mixed 50/50 with demineralised water. Proguard 50 Organic Coolant has a service life of up to 5 years/500,000 kms in automotive and 6 years/600,000 kms/6,000 hours in heavy-duty diesel applications. Proguard 50 Coolant maximises protection to all metals found in coolant systems. The organic Acid-based coolants have proved far superior in protection of aluminium against "hot spot" corrosion and gives excellent protection against cavitation, erosion and wet-sleeve liner pitting. This product is coloured Green.
APPLICATION
Proguard 50 Organic Long Life Coolant, when added to an automotive radiator, will raise the boiling point and lower the freezing point. Proguard 50 is recommended for most heavy-duty diesel and automotive applications. It should be added directly to the coolant system.
STANDARDS
Recommended for use w here the following performance levels are quoted:
AFNOR NFR 15-601 ASTM D3306 D4656 D4985 BS 6580 GM 6277M GM 1825M GM 1899M Ford ESE FM 97B18-C Ford ESE M 978B4H-A Ford ESE M 99B166-C Toyota K2601G-1G Mazda MES MN 1210 Japanese JIS K 2234 SAE J 1034 JASO M 324 MAN 324Type SNF Volvo (Spec no. 1286083) Cummins 92 T8-9 BMW N. 600 69.0 Caterpillar 1 EO 535 Mercedes Benz MB-Approval 325.3 Nissan NES 5059 LLC Saab FSD 8074 DAF 742002/BTPS 606A/DCEA 615 Komatsu KES 07.892 Jenbacher Lieberr MD 1-36-130 Waukesha 4-1974D Meets the phosphate-free requirements of European Manufacturers. Meets the silicate-free requirements of Japanese Manufacturers.
CONTAINER SIZES
1000 litre IBC 205 Litres
20 Litres
5 litres
CONTACT
PROLUBE Lubricants,
P.O. Box 5435, Telephone: (07) 3881 1733 15 Pinacle Street, Fax: (07) 3881 1708Brendale, Qld. 4500. Email: admin@prolube .com.au
Internet: www.prolube.com.au
Issue Date 28/2/2013
PRODUCT INFORMATION SHEET
Product Name: PROGUARD ORGANIC LONGLIFE COOLANT
. CONCENT RAT E
PRODUCT
Proguard Organic Long life Coolant is a premium quality anti-boil/anti-freeze coolant Concentrate based on carboxylate technology and contains no silic ates, borates, phosphates, nitrates, nitrites or amines. Proguard contains 86% monoethylene glycol and a double corrosion inhibitor package based on organic acid-long life technology. Proguard Organic Coolant has a service life of up to 5 years/5OO,OOO kms in automotive and 6 years/6OO,OOO kms/6,OOO hours in heavy-duty diesel applications. Proguard coolant maximises protection to all metals found in coolant systems. The organic Acid-based coolants have proved far superior in protection of aluminium against "hot spot" corrosion and gives excellent protection against cavitation, erosion and wet-sleeve liner pitting. This product is coloured Green.
APPLICATION
Proguard Anti Boil/Anti-Freeze Long Life Coolant, when added to an automotive radiator, will raise the boiling point and lower the freezing point. Proguard is recommended for most heavy-duty diesel and automotive applications.
STANDARDS
Recommended for use where the following performance levels are quoted:
AFNOR NFR 15-601 ASTM D3306 D4656 D4985 BS 6580 GM 6277M GM 1825M GM 1899M Ford ESE FM 97B18-C Ford ESE M 978B4H-A Ford ESE M 99B166-C Toyota K2601G-1G Mazda MES MN 1210 Japanese JIS K 2234 SAE J 1034 JASO M 324 MAN 324Type SNF Volvo (Spec no. 1286083) Cummins 92 T8-9 BMW N. 600 69.0 Caterpillar 1 EO 535 Mercedes Benz MB-Approval 325.3 Nissan NES 5059 LLC Saab FSD 8074 DAF 742002/BTPS 606A/DCEA 615 Komatsu KES 07.892 Jenbacher Lieberr MD 1-36-130 Waukesha 4-1974D Meets the phosphate-free requirements of European Manufacturers. Meets the silicate-free requirements of Japanese Manufacturers.
CONTAINER SIZES
1000 litre IBC 205 Litres
20 Litres
5 litres
CONTACT
PROLUBE Lubricants,
P.O. Box 5435, Telephone: (07) 3881 1733 15 Pinacle Street, Fax: (07) 3881 1708 Brendale, Qld. 4500. Email: admin@prolube .com.au
Internet: www.prolube.com.au
Issue Date 28/2/2013
PRODUCT INFORMATION SHEET
Product Name: PROGUARD RCI • LONG LIFE ORGANIC RUST AND CORROSION INHIBITOR
PRODUCT
Proguard RCI is a premium quality long life organic Rust and Corrosion Inhibitor. Proguard RCI is an organic acid technology formulation (OAT). This is a high performance product and should not be compared to lower quality and cost products that are available. Proguard RCI gives superior protection to all metals found in engine cooling systems. It exceeds the performance requirements of Australian Standard AS/NZS 2108.1-2004 Type B coolant. It provides excellent protection against liner pitting in heavy duty diesel engines and is suitable for use in all vehicles where anti-boil/anti-freeze protection is not required. Proguard RCI significantly reduces cavitation, erosion and increases the service life of water pumps, it is environmentally safe and biodegradable.
APPLICATION
The recommended treat rate is 5-7 % with demineralised water. Service life is 100,000 kms/3 years in well maintained automotive engines and up to 4 years / 500,000 kms / 6,000 hours in well maintained heavy duty diesel cooling systems. Proguard RCI is compatible with Proguard Proguard XR and Proguard 50 coolants.
STANDARDS
Recommended for use where the following performance levels are quoted:
• Nalco Maxitreat 3447 • Powercool GF9477-C PROPERTIES
Appearance: Dark Green Liquid pH: 9.00-9.70 Odour: Slight Odour Non flammable Density @ 15oC: 1.05-1.06 Solubility: Soluble in Water Reserve Alkalinty: 80ml Specific Gravity: 1.05-1.08 Boiling Point: n/a
…. continued
Page 1 of 2
Product Name: PROGUARD RCI (Continued)
TEST RESULTS
ASTM D 1384-GLASSWARE CORROSION TEST
Allowable Weight Loss Typical Weight Loss Copper 10mg I coupon 0.8Solder 15mg I coupon 2.4Brass 10mg I coupon 0.1Steel 10mg I coupon +1.0Cast Iron 10mg I coupon +1.3Aluminium 15mg I coupon 13.0
No evidence of any pitting attack.
ASTM D 4340-ALUMINIUM HEAT REJECTION TEST
Allowable Weight Loss Typical Weight Loss
1.0 MG I cm2 I week 0.25
ASTM D 2809-CAVITATION EROSION CORROSION
Rating (minimum) Proguard RCI
8 CONTAINER SIZES
9
205 Litres 20 Litres
CONTACT
PROLUBE Lubricants,
P.O. Box 5435, Telephone: (07) 3881 1733 15 Pinacle Street, Brendale, Qld. 4500.
Fax: Email: Internet:
(07) 3881 1708 admin@prolube .com.au www.prolube.com.au
Issue Date 27I2I2014
Page 2 of 2
PRODUCT INFORMATION SHEET
Product Name: PROGUARD RCI • LONG LIFE ORGANIC RUST AND CORROSION INHIBITOR
PRODUCT
Proguard RCI is a premium quality long life organic Rust and Corrosion Inhibitor. Proguard RCI is an organic acid technology formulation (OAT). This is a high performance product and should not be compared to lower quality and cost products that are available. Proguard RCI gives superior protection to all metals found in engine cooling systems. It exceeds the performance requirements of Australian Standard AS/NZS 2108.1-2004 Type B coolant. It provides excellent protection against liner pitting in heavy duty diesel engines and is suitable for use in all vehicles where anti-boil/anti-freeze protection is not required. Proguard RCI significantly reduces cavitation, erosion and increases the service life of water pumps, it is environmentally safe and biodegradable.
APPLICATION
The recommended treat rate is 5-7 % with demineralised water. Service life is 100,000 kms/3 years in well maintained automotive engines and up to 4 years / 500,000 kms / 6,000 hours in well maintained heavy duty diesel cooling systems. Proguard RCI is compatible with Proguard Proguard XR and Proguard 50 coolants.
STANDARDS
Recommended for use where the following performance levels are quoted:
• Nalco Maxitreat 3447 • Powercool GF9477-C PROPERTIES
Appearance: Dark Green Liquid pH: 9.00-9.70 Odour: Slight Odour Non flammable
CONTAINER SIZES
205 Litres 20 Litres
CONTACT
PROLUBE Lubricants,
P.O. Box 5435, Telephone: (07) 3881 1733 15 Pinacle Street, Brendale, Qld. 4500.
Fax: Email: Internet:
(07) 3881 1708 admin@prolube .com.au www.prolube.com.au
Issue Date 27/2/2014
PRODUCT INFORMATION SHEET
Product Name: PROGUARD XR 50
· 50/50 PREMIX COOLANT
PRODUCT
Proguard XR 50 Premix is a heavy duty full formulation hybrid anti boil/anti freeze coolant recommended for use in heavy duty diesel engines and light duty dies el where the manufacturer suggests a hybrid type coolant. Proguard XR 50 Premix contains propylene glycol and a heavy duty organic acid inhibitor package mixed 50/50 with demineralised water ensuring ultimate corrosion protection and extended service life. Proguard XR 50 is based on a combination of organic technology corrosion inhibitors with conventional USA technology ingredients included for compliance with Cummins, Detroit and some CAT equipment that contain low silicate, nitrite, nitrate and molybdate Proguard XR protects all metals found in cooling systems and gives excellent protection against cavitation erosion and wet-sleeve liner pitting and significantly increases the operating life of water pumps. Proguard XR 50 is suitable where SCA filters are recommended or required. This product is coloured Red.
APPLICATION
Proguard XR 50 Premix has a proven record over many years with marine engines, taxi fleets, government departments, bus companies and several large fleet truck companies. It has a service life of up to 6 years / 1,000,000kms / 12,000hrs in heavy duty diesels. There are obvious environmental advantages as a result of fewer coolant changes
STANDARDS Recommended for use where the following Performance levels are quoted:
TMC RP-338 Extended Life TMC RP-330 ASTM D-3306 ASTM D-4985 ASTM D-6211 ASTM D-5216 CID- A-A-52624 GM® 1899 & 1825M Case New Holland® Mercedes Benz® DBL 7700 John Deere® 8650-5 John Deere® JDM HD24 Saab Scania® 6901 Waukesha 4-1974D Volvo® (spec. no. 1286083) BMW® N 60069.0 Japanese JS K 2234 Mazda MES MN 121D Cummins® AEB-9901 Nissan NES M5509 Detroit Diesel® Bulletin 7SE298 Freightliner 48 - 22880 Caterpillar 1-EO-535 Iveco® EMD M.I. 1748E Toyota TSK 2601G SAE J 1034, J1941, JASO M 324 and JIS K 2234
CONTAINER SIZES
1000 litre IBe 200 Litres
CONTACT
20 Litres
PROLUBE Lubricants,
P.O. Box 5435, Telephone: (07) 3881 1733 15 Pinacle Street, Fax: (07) 3881 1708Brendale, Qld. 4500. Email: admin@prolube .com.au
Internet: www.prolube.com.au
Issue Date 28/2/2013
PRODUCT INFORMATION SHEET
Product Name: PROGUARD XR COOLANT
. CONCENT RAT E
PRODUCT
Proguard XR Coolant is a heavy duty full formulation hybrid anti boil1anti freeze coolant recommended for use in heavy duty diesel engines and light duty diesel where the manufacturer suggests a hybrid type coolant. Proguard XR in concentrate form contains 90% propylene glycol and a heavy duty organic acid inhibitor package ensuring ultimate corrosion protection and extended service life when compared with conventional coolants. Proguard XR is based on a combination of organic technology corrosion inhibitors with conventional USA technology ingredients included for compliance with Cummins, Detroit and some CAT equipment that contain low silicate, nitrite, nitrate and m olybdate Proguard XR protects all metals found in cooling systems and gives excellent protection against cavitation erosion and wet- sleeve liner pitting and significantly increases the operating life of water pumps. Proguard XR is suitable where SCA filters are recommended or required. This product is coloured Red.
APPLICATION
Proguard XR has a proven record over many years with marine engines, taxi fleets, government departments, bus companies and several large fleet truck companies. It has a service life of up to 6 years 1 1,000,000kms 1 12,000hrs in heavy duty diesels. There are obvious environmental advantages as a result of fewer coolant changes
STANDARDS Recommended for use where the following Performance levels are quoted:
TMC RP-338 Extended Life TMC RP-330 ASTM D-3306 ASTM D-4985 ASTM D-6211 ASTM D-5216 CID- A-A-52624 GM® 1899 & 1825M Case New Holland® Mercedes Benz® DBL 7700 John Deere® 8650-5 John Deere® JDM HD24 Saab Scania® 6901 Waukesha 4-1974D Volvo® (spec. no. 1286083) BMW® N 60069.0 Japanese JS K 2234 Mazda MES MN 121D Cummins® AEB-9901 Nissan NES M5509 Detroit Diesel® Bulletin 7SE298 Freightliner 48 - 22880 Caterpillar 1-EO-535 Iveco® EMD M.I. 1748E Toyota TSK 2601G SAE J 1034, J1941, JASO M 324 and JIS K 2234
CONTAINER SIZES
1000 litre IBe 200 Litres 20 Litres
CONTACT
PROLUBE Lubricants,
P.O. Box 5435, Telephone: (07) 3881 1733 15 Pinacle Street, Fax: (07) 3881 1708Brendale, Qld. 4500. Email: admin@prolube .com.au Internet: www.prolube.com.au
Issue Date 28/2/2013
PRODUCT INFORMATION SHEET
Product Name: PROLITE PRODUCT
Prolite is a highly refined solvent used for cleaning and as a refined fuel for portable stoves and wick lamps. Prolite is very fast drying and can be used for cleaning metal, hard plastic and painted surfaces. Prolite leaves minimal residue after drying.
Flash Point < 0 oC Specific Gravity 0.67
APPLICATION
Prolite is classified as hazardous as it a highly flammable product.
As a cleaner, apply with a cloth, taking care to avoid all possible ignition sources. Keep well ventilated. Do not use in enclosed spaces.
Use as directed in stoves and lamps.
CONTAINER SIZES
200 Litres, 20 Litres. CONTACT
PROLUBE Lubricants,
P.O. Box 5435, Telephone: (07) 3881 1733 15 Pinacle Street, Brendale, Qld. 4500.
Fax: Email: Internet:
(07) 3881 1708 admin@prolube .com.au www.prolube.com.au
Issue Date 6/6/2013
PRODUCT INFORMATION SHEET
Product Name: PROLITH EPO GREASE PRODUCT
Prolube Prolith EP0 Grease is a heavy duty multipurpose grease with excellent anti- wear and high temperature performance. It is designed for plain and roller bearing service with centralised lubrication systems. It is manufactured with a lithium hydroxystearate soap base with selected high viscosity index mineral oils combined with rust, oxidation and corrosion inhibitors and specially selected lead free extreme pressure additives.
Appearance Dark Brown Worked Penetration Oil Viscosity - Typical
370 mm180 cSt@40oC
ASTM D217
Timken OK Load 23 ASTM D2509 4 Ball Weld Test 290 kg ASTM D2596
APPLICATION
Prolube Prolith EP0 Grease is the prime recommendation for use centralised automatic or semi-automatic greasing systems in mining, earthmoving, automotive and marine applications. Prolube Prolith EP0 Grease may be used in gearboxes which require a semifluid grease, but which may be prone to leakage.
The recommended temperature range is from -20 oC to 130 oC, however Prolith EP0 Grease may be used at higher temperatures with the lubrication frequency increased accordingly.
STANDARDS
NLGI Grade No 0 CONTAINER SIZES
20 kg CONTACT
PROLUBE Lubricants,
P.O. Box 5435, Telephone: (07) 3881.1733 15 Pinacle St, Fax: (07) 3881.1708 Brendale, Qld. 4500. Email: admin@prolube .com.au Internet: www.prolube.com.au
Issue Date 20/2/2014
PRODUCT INFORMATION SHEET
Product Name: PROLITHTAC GREASE PRODUCT
Prolube Prolithtac Grease is a heavy duty lithium complex, extreme pressure (EP) grease with excellent anti-wear and high temperature performance. It provides excellent adhesion and water resistance, rust and corrosion protection and extended life in high temperature service. It is manufactured with a lithium complex soap base with selected high viscosity index mineral oils combined with rust, oxidation and corrosion inhibitors , specially selected lead free extreme pressure additives and a tackiness additive.
Appearance Blue, Tacky Worked Penetration Oil Viscosity - Typical
275 mm190 cSt@40oC
ASTM D217
Timken OK Load 23 ASTM D2509 4 Ball Weld Test 350 kg ASTM D2596
APPLICATION
Prolube Prolithtac Grease is the prime recommendation for use in applications where high thermal resistance is required. These include automotive, industrial, mining, earthmoving and marine applications such as wheel bearings subjected to high temperatures and load caused by repeated and high speed braking in particular on disc brakes, chassis, high speed ball and roller bearings, pre-packed and sealed for life bearings in several heavy industries, boat trailer wheel bearings, water pumps, winches etc. and other applications requiring grease lubrication. Prolube Prolithtac Grease may be used where either soap based or clay based greases are recommended, particularly if rationalisation of grease types is required.
The recommended temperature range is from -25 oC to 175 oC, however Prolithtac Grease may be used at temperatures to 200oC with the lubrication frequency increased accordingly.
STANDARDS
NLGI Grade No 2 CONTAINER SIZES
180 kg 55 kg 20 kg 2.5 kg 450 gr Cartridges. CONTACT
PROLUBE Lubricants,
P.O. Box 5435, Telephone: (07) 3881.1733 15 Pinacle St, Fax: (07) 3881.1708 Brendale, Qld. 4500. Email: admin@prolube .com.au Internet: www.prolube.com.au
Issue Date 20/2/2014
WE INVIT E YOU T O EXPERIENCE T HE PROLUBE ADVANT AGE
Prolube was formed in 1988 to formulate, blend and market a range of automotive, industrial and agricultural lubricants specifically for the arduous Australian climatic and operational conditions.
Prolube remains wholly Queensland owned and operates a production plant in Brisbane.
Prolube uses a revolutionary in-line blending system which takes little energy and is widely accepted overseas as the most environmentally satisfactory method of blending lubricants.
Prolube's manufacturing process uses high quality hydro treated Group 2, Group 3 and fully synthetic base oils with the latest technology additive chemistry and blends them to produce lubricants meeting the upper limits of the relevant specification range. We have access to international technological support including advice and development of new specifications and products.
Prolube's range of products includes engine oils, transmission fluids, gear oils, hydraulic oils and a diverse range of specialist products.
Prolube products are available in a variety of pack sizes including 1000litre IBCs, 205 litres, 60 litres, 20 litres, 5 litres and 1 litre. We are able to offer a bulk tanker service for selected products within the metropolitan Brisbane area.
Prolube supports a growing network of distributors throughout Queensland, N.S.W. Victoria, South Australia, Northern Territory and New Zealand.
Prolube aims to build long-term, mutually-beneficial relationships with all of our customers.
Prolube prides itself on its enviable reputation for its consistent quality of product and service to its customers while still being competitive in the market place.
CONTACT
PROLUBE Lubricants, P.O. Box 5435, 15 Pinacle Street, Brendale, Qld. 4500.
Telephone: (07) 3881.1733 Fax: (07) 3881.1708 Email: [email protected] Internet: www.prolube.com.au
February 2014
PRODUCT INFORMATION SHEET
Product Name: PROMARINE TCW·3 OUTBOARD ENGINE OIL
PRODUCT
Prolube Marine TC-W3 is a special two-stroke oil formulated from high quality base oils and an excellent additive package in order to meet the strict requirements of the National Marine Manufacturers Association TC-W3 standard. The base oil selection ensures virtually smokeless operation. This product provides superior performance in water cooled two-stroke engines (pre-mix or oil injected) and has a selected lubricity enhancer.
Viscosity Typical 8.5 cSt @ 100oC
APPLICATION
Recommended for all water-cooled two-stroke marine engines where the manufacturer requires a lubricant meeting the TC-W3 standard. Promarine TCW -3 can be used with fuel/oil ratios of up to 100:1 (mix as per engine manufacturers recommendation).
STANDARDS
Meets or exceeds the following: NMMA (BIA): TCW -3, TCW-II API: TD (TSC-4).
CONTAINER SIZES
205 Litres, 20 Litres, 5 Litres, 1 Litres.
CONTACT
PROLUBE Lubricants,
P.O. Box 5435, Telephone: (07) 3881 1733 15 Pinacle Street, Fax: (07) 3881 1708 Brendale, Qld. 4500. Email: admin@prolube .com.au Internet: www.prolube.com.au
Issue Date 6/6/2013
PRODUCT INFORMATION SHEET
Product Name: PROSOL QB PRODUCT
Prolube Prosol QB is a multi-purpose highly concentrated, water based biodegradable detergent degreaser/cleaner which can be used to remove oil, grease, dirt, road grime smears insects and general soiling from most surface materials. Prosol QB diluted with the appropriate volume of clean water can be used on auto and marine paint, fibreglass, vinyl, terrazzo, timber, glass and metal surfaces.
APPLICATION
Dilute Prosol QB with clean water for tasks as follows: 5:1 Heavy duty degreasing, concrete, tiles, dirty or oily floors etc 20:1 General degreasing, vehicle chassis, tyres, squash courts/rollerblade rinks (skid marks) 80:1 General cleaning, painted surfaces, metal, toilet, bathroom & kitchen areas 150:1 Light duty cleaning, glass, mirrors etc.
High pressure water cleaners: as per manufacturer's instructions.
Apply with a brush, cloth, sponge, spray or pressure cleaner. For best results use with warm to hot water. Do not allow to dry on auto or marine painted surfaces, these surfaces should be cool and out of direct sunlight, wash surface off with clean water.
Safety Precautions: Prolonged contact with the skin may cause irritation, wear rubber gloves when handling and avoid contact with skin and eyes.
CONTAINER SIZES
Bulk, 200 Litres, 20 Litres, 5 Litres. CONTACT
PROLUBE Lubricants,
P.O. Box 5435, Telephone: (07) 3881 1733 15 Pinacle Street, Brendale, Qld. 4500.
Fax: Email: Internet:
(07) 3881 1708 admin@prolube .com.au www.prolube.com.au
Issue Date 6/6/2013
PRODUCT INFORMATION SHEET
Product Name: PROSTOP DOT 3 DISC BRAKE AND CLUTCH FLUID
PRODUCT
Prolube Prostop Dot 3 Disc Brake and Clutch Fluid is an inhibited blend of glycol ethers, corrosion inhibitors and fluid modifiers meeting the requirements of a general purpose hydraulic brake fluid. It is specifically designed for the low to medium performance modern and early model car braking systems. We recommend the fluid should be replaced every twelve months under average driving conditions.
APPLICATION
Formulated for automotive drum brake, disc brake and hydraulically actuated clutch systems of early and late model vehicles where the manufacturer recommends using Dot 3 Fluid. Some Toyota models and other Japanese vehicles stipulate DOT 3 brake fluids.
STANDARDS
Meets or exceeds the following: • AS/NZS 1960-1995 Grade 1 • SAE J1703 • FMVSS No. 116 Dot 3
CONTAINER SIZES
20 Litres, 5 Litres
CONTACT
PROLUBE Lubricants,
P.O. Box 5435, Telephone: (07) 3881 1733 15 Pinacle Street, Brendale, Qld. 4500.
Fax: Email: Internet:
(07) 3881 1708 admin@prolube .com.au www.prolube.com.au
Issue Date 14/2/13
PRODUCT INFORMATION SHEET
Product Name: PROSTOP DOT 4 ABS COMPATIBLE DISC BRAKE AND CLUTCH FLUID
PRODUCT
Prolube Prostop Dot 4 Disc Brake and Clutch Fluid is a special blend of glycol ethers, corrosion inhibitors and fluid modifiers designed to meet the needs of braking systems, including drum, disc and ABS, which are used in all types of vehicles including cars, trucks, buses and coaches operating under heavy duty conditions. The fluid has a high boiling point, low moisture absorption and is compatible with all metals and seals typically used in braking systems. An additional feature is its ability to sustain high vapour lock temperatures throughout its service life.
APPLICATION
Formulated for automotive drum brake systems, disc brake systems, ABS brake systems and hydraulically actuated clutch systems.
STANDARDS
Meets or exceeds the following: • AS/NZS.2960.1-1995 Dot 4/ Grade 3. • SAE. J.1703, June 91. • FMVSS No.571-116 • 1S0.4925.
CONTAINER SIZES
200 Litres, 20 Litres, 5 Litres 500ml
CONTACT
PROLUBE Lubricants,
P.O. Box 5435, Telephone: (07) 3881 1733 15 Pinacle Street, Brendale, Qld. 4500.
Fax: Email: Internet:
(07) 3881 1708 admin@prolube .com.au www.prolube.com.au
Issue Date 14/2/13
PRODUCT INFORMATION SHEET
Product Name: PROSUPERMOLY GREASE PRODUCT
Prolube Prosupermoly Grease is a superior multi-purpose molybdenum disulphide containing grease possessing excellent lubrication characteristics for a wide range of anti-friction and plain bearings, ball joints, king pins, gears and couplings in automotive, marine, agricultural and industrial application. The "Moly" with extreme pressure and anti-wear properties plus the tackiness adhesive additive enables high performance extended service life under high loading and shock loading conditions from low temperature to very high temperature environments.
Appearance Grey black, Tacky Worked Penetration Oil Viscosity - Typical
265 - 290 mm220 cSt@40oC
ASTM D217
Timken OK Load 28 ASTM D2509 4 Ball Weld Test 550 kg ASTM D2596
APPLICATION
Prolube Prosupermoly Grease is the prime extended life recommendation for plain, ball and roller bearings, and other applications requiring grease lubrication, in all automotive, agricultural, marine and industrial equipment. Excellent recommendation for chassis, universal joints and especially for ball joints. Prosupermoly Grease is recommended for high shock load applications such as excavator and loader bucket pins.
The recommended temperature range is from -25 oC to 175 oC, however Prosupermoly Grease may be used at temperatures to 200oC with the lubrication frequency increased accordingly.
STANDARDS
NLGI Grade No 2 CONTAINER SIZES
20 kg 450 gr Cartridges. CONTACT
PROLUBE Lubricants,
P.O. Box 5435, Telephone: (07) 3881.1733 15 Pinacle St, Fax: (07) 3881.1708 Brendale, Qld. 4500. Email: admin@prolube .com.au Internet: www.prolube.com.au
Issue Date 20/2/2014
PRODUCT INFORMATION SHEET
Product Name: PROSUPERPLANT GREASE PRODUCT
Prolube Prosuperplant Grease is an extremely high quality product with excellent lubrication characteristics for the range of anti-friction and plain bearings, gears and couplings in automotive, marine, agricultural and industrial applications requiring a grease with a high base oil viscosity and weld load. It is based on a lithium complex thickener, high quality paraffinic and polybutene base stocks combined with the inclusion of extreme pressure additives, effective rust, oxidation and corrosion inhibitors.
Appearance Red, Smooth and Tacky Worked Penetration 270 mm ASTM D217 Oil Viscosity - Typical Timken OK Load
1900 cSt@40oC 30 ASTM D2509
4 Ball Weld Test 480 kg ASTM D2596
APPLICATION
Prolube Prosuperplant Grease is the ideal recommendation for use in extreme heavy- duty applications and where high thermal resistance is a must. These applications include all industrial, earthmoving, agricultural, autom otive and marine equipment. Prosuperplant Grease is also suitable for high shock load applications such as excavator and loader bucket pins.
The recommended temperature range is from -20 oC to 185 oC, however Prosuperplant Grease may be used at temperatures to 200oC with the lubrication frequency increased accordingly.
STANDARDS
NLGI Grade No 2 CONTAINER SIZES
20 kg 2.5kg 450 gr Cartridges. CONTACT
PROLUBE Lubricants,
P.O. Box 5435, Telephone: (07) 3881.1733 15 Pinacle St, Fax: (07) 3881.1708 Brendale, Qld. 4500. Email: admin@prolube .com.au Internet: www.prolube.com.au
Issue Date 20/2/2014
PRODUCT INFORMATION SHEET
Product Name: PROLUBE PROTECTAGLOSS
PRODUCT
Prolube Protectagloss is a high quality solvent-based silicone tyre treatment. It is formulated with silicones that provide a consistent shiny finish when applied correctly. It resists water and outlasts most competitive products. Prolube Protectagloss also rejuvenates tyres and aged vinyl.
APPLICATION
Prolube Protectagloss may be sprayed, painted or wiped onto surfaces. Spraying the surface evenly and allowing 15 minutes to dry obtains best results. Should faster drying be necessary, wiping with a clean rag after spraying will help, however, a less shiny surface may result. This product is highly flammable and should be treated accordingly. The product MSDS should be read before using.
CONTAINER SIZES
200 Litres, 20 Litres, 5 Litres
CONTACT
PROLUBE Lubricants,
P.O. Box 5435, Telephone: (07) 3881 1733 15 Pinacle Street, Brendale, Qld. 4500.
Fax: Email: Internet:
(07) 3881 1708 admin@prolube .com.au www.prolube.com.au
Issue Date 14/2/13
Desired Boiling Point °C Min.Ambient Temp. °C Protemp Water 109° - 34° 1 part 1 part 104° - 19° 1 part 2 parts 104° - 12° 1 part 3 parts
PRODUCT INFORMATION SHEET
Product Name: PROTEMP ANTI·FREEZE I ANTI·BOIL CONCENTRATE COOLANT
PRODUCT
Protemp is a fully formulated ethylene glycol anti-boil / anti-freeze coolant concentrate. When added to the engine cooling system it gives year-round protection by raising the boiling point whilst reducing the freezing point of engine coolants. The product provides the optimum protection for engines of both ferrous and aluminium construction against corrosion, cavitation, erosion and cold or high temperature damage with minimal effect on plastics and rubber. It is especially suitable for engines with air-conditioning or other accessories.
PRECAUTIONS: This product is highly toxic and must be stored in an area not accessible to children or pets .Consult the MSDS at www.prolube.com.au
APPLICATION
Prolube Anti-Freeze Anti-Boil Concentrate, when added to automotive radiator cooling systems will raise the boiling point and lower the freezing point as shown:
Proguard Organic Longlife Coolant is the preferred coolant for Heavy Duty Diesels.
STANDARDS • ASTM. D3306 • GM.1825M/6043M • GMHA.HN2043 • AS/NZS 2108.1-97 • BS 6580 • SAE J1034 • JIS K2234 • MES MN121AC-FAO4 MAZDA • ESE-M97B44-A FORD
CONTAINER SIZES .
20 Litres 5 Litres 1 Litre. CONTACT
PROLUBE Lubricants,
P.O. Box 5435, Telephone: (07) 3881 1733 15 Pinacle Street, Brendale, Qld. 4500.
Fax: Email: Internet:
(07) 3881 1708 admin@prolube .com.au www.prolube.com.au
Issue Date 31/1/2013
PRODUCT INFORMATION SHEET
Product Name: ROCK DRILL Series PRODUCT
Prolube Rock Drill lubricants are designed for pneumatic precision air tools. They contain anti-rust, tackiness, and moisture-absorbing and extreme pressure additives. Meets Gardner Denver, Atlas Copco, Ingersoll Rand and other manufacturers' specifications.
Grade 100 150 320Viscosity ( Typical cSt @ 40oC) 100 150 320Viscosity ( Typical cSt @ 100oC) 10.4 15.0 26.0
APPLICATION
For use in precision air tools such as rock drills, jackhammers, jack picks and rammers as well as centralised lubrication for larger crawler-mounted drill rigs, etc., of all makes. They are also widely used as chain, wire rope and way lubricants and in some rotary air tools.
STANDARDS
Meets or exceeds the following manufacturers' requirements: Gardner Denver, Atlas Copco, Ingersoll Rand..
CONTAINER SIZES
205 Litres, 20 Litres. CONTACT
PROLUBE Lubricants,
P.O. Box 5435, Telephone: (07) 3881.1733 15 Pinacle St, Brendale, Qld. 4500.
Fax: Email: Internet:
(07) 3881.1708 [email protected] www.prolube.com.au
Issue Date 31/1/2013
PRODUCT INFORMATION SHEET
Product Name: SCREENEX PRODUCT
Screenex is a concentrated glass cleaner, formulated for addition to vehicle windscreen cleaner reservoirs. Screenex is very effective in the removal of grease, dirt and bugs from windscreens. Screenex contains evaporative chemicals to enable quick drying and eliminate streaking. It is economical and safe to use and does not damage wiper rubbers or paintwork.
APPLICATION
Add Screenex to windscreen reservoir at a ratio of 50ml of Screenex per 1 litre of water.
.
CONTAINER SIZES
20 Litres.
CONTACT
PROLUBE Lubricants,
P.O. Box 5435, Telephone: (07) 3881 1733 15 Pinacle Street, Brendale, Qld. 4500.
Fax: Email: Internet:
(07) 3881 1708 admin@prolube .com.au www.prolube.com.au
Issue Date 31/1/2013
PRODUCT INFORMATION SHEET
Product Name: SELF LEVELLING GREASE EPOO
PRODUCT
Prolube Self Levelling Grease is a general-purpose lithium extreme pressure (EP) grease with anti-wear performance. It has outstanding rust and corrosion protection and excellent resistance to water washout. It is manufactured with a lithium hydroxy- stearate soap base with selected high viscosity index mineral oils combined with rust, oxidation and corrosion inhibitors and very effective lead free extreme pressure additives.
Appearance Light brown, semi fluid Worked Penetration 415 mm ASTM D217 Oil Viscosity 180 cSt@40oC Typical Timken OK Load D23 ASTM D2509 4 Ball Weld Test 290 kg ASTM D2596
APPLICATION
This grease is used in gearboxes and bearings in mobile machinery where the grease needs to flow to the point of application. It is also used in gearboxes where sealing is poor or where seals are worn and gear oils cannot be retained. The grease has excellent lubrication qualities and is ideal for pumping or for use in once through centralised automatic or semi automatic lubrication systems.
The recommended temperature range is from -20 oC to 130 oC, however Self Levelling Grease may be used at higher temperatures with the lubrication frequency increased accordingly.
STANDARDS
NLGI Grade No 00 CONTAINER SIZES
20 kg 2.5 kg CONTACT
PROLUBE Lubricants,
P.O. Box 5435, Telephone: (07) 3881.1733 15 Pinacle St, Brendale, Qld. 4500.
Fax: Email: Internet:
(07) 3881.1708 admin@prolube .com.au www.prolube.com.au
Issue Date 26/6/2012
PRODUCT INFORMATION SHEET
Product Name: PROLUBE SL MOLY GREASE PRODUCT
Prolube Self Levelling Grease is a lithium complex extreme pressure (EP) grease with anti-wear performance and fortified with molybdenum disulphide (moly). It has outstanding rust and corrosion protection and excellent resistance to water washout. It is manufactured with a lithium hydroxyl - stearate soap base with selected high viscosity index mineral oils combined with rust, oxidation and corrosion inhibitors and very effective lead free extreme pressure additives.
Appearance Grey/Black, semi fluid Worked Penetration 415 mm ASTM D217 Oil Viscosity 180 cSt@40oC Typical Timken OK Load 23 ASTM D2509 4 Ball Weld Test 290 kg ASTM D2596 Solids Content (Moly) 2.5%
APPLICATION
This grease is used in gearboxes and bearings in mobile machinery where the grease needs to flow to the point of application. It is also used in gearboxes where sealing is poor or where seals are worn and gear oils cannot be retained. The grease has excellent lubrication qualities and is ideal for pumping or for use in once through centralised automatic or semi automatic lubrication systems. The inclusion of moly provides extra protection with high impact loading such as in crushers, vibrators and profilers.
The recommended temperature range is from -20 oC to 130 oC, however Self Levelling Grease may be used at higher temperatures with the lubrication frequency increased accordingly.
STANDARDS
NLGI Grade No 00 CONTAINER SIZES
20 kg 2.5 kg CONTACT
PROLUBE Lubricants,
P.O. Box 5435, Telephone: (07) 3881.1733 15 Pinacle St, Brendale, Qld. 4500.
Fax: Email: Internet:
(07) 3881.1708 admin@prolube .com.au www.prolube.com.au
Issue Date 25/7/2013
PRODUCT INFORMATION SHEET
Product Name: SLIDEWAY SERIES WAY OILS
PRODUCT
Prolube Slideway oils are tacky, extreme pressure anti-wear machine tool slideway lubricants. Minimises stick-slip and chatter.
Grade 68 220Viscosity ( Typical cSt @ 40oC) 68 220Viscosity ( Typical cSt @ 100oC) 8.8 19.7
APPLICATION
Recommended for lubricating the slideways of machine tools. planers, lathes and the slides and guides of other types of machines where a tacky, non-corrosive EP lubricant is required.
STANDARDS
Meets or exceeds the following: • Cincinatti Milacron P-47
CONTAINER SIZES
205 Litres, 20 Litres, 5 Litres.
CONTACT
PROLUBE Lubricants,
P.O. Box 5435, Telephone: (07) 3881.1733 15 Pinacle St, Brendale, Qld. 4500.
Fax: Email: Internet:
(07) 3881.1708 [email protected] www.prolube.com.au
Issue Date 8/11/12
PRODUCT INFORMATION SHEET
Product Name: SOLEX (SOLUBLE OIL CONCENTRATE)
PRODUCT
Solex is a high-grade base stock blended with emulsifier and bactericide to provide a general purpose soluble oil concentrate. Solex contains sulphur based Extreme Pressure additives and provides excellent emulsion stability in hard water up to 400 ppm (expressed as calcium carbonate), and offers good rut prevention characteristics.
APPLICATION
This is a general-purpose metal cutting and machining coolant. It is used in industrial applications where a general-purpose soluble oil is required such as :
Milling Drilling Turning Grinding Broaching Thread cutting Tapping Metal forming
Mix at 5% to 10% concentration with clean fresh water to form a white emulsion.
CONTAINER SIZES
205 Litres, 20 Litres, 5 Litres.
CONTACT
PROLUBE Lubricants,
P.O. Box 5435,
Telephone:
(07) 3881 1733 15 Pinacle Street, Brendale, Qld. 4500.
Fax: Email: Internet:
(07) 3881 1708 admin@prolube .com.au www.prolube.com.au
Issue Date 25/10/2012
PRODUCT INFORMATION SHEET
Product Name: SYNTAC HT 2 SYNTHETIC GREASE
PRODUCT
Prolube Syntac HT 2 Grease is a supreme performance product suitable for a large variety of applications at extremes of temperature. It is manufactured with a lithium complex thickener, selected paraffinic and PAO base oils combined with a PTFE powder, rust, oxidation and corrosion inhibitors. It is recommended for bearing lubrication under all operating conditions from normal to unusually severe load service and with temperatures varying from -40oC to +210oC. (220oC for short periods). The PAO base oil with its wax-free nature and the low coefficient of traction provides extremely good low temperature pumpability. Prolube Syntac HT 2 Grease has excellent shear stability as well as high load extreme pressure characteristics. The addition of PTFE powder extends the lubrication intervals, reduces the wetability and improves the antifriction properties.
Appearance Green Smooth Worked Penetration Oil Viscosity - Typical
275 - 305 mm170 cSt@40oC
ASTM D217
Timken OK Load 36 ASTM D2509 4 Ball Weld Test 500 kg ASTM D2596
APPLICATION
Prolube Syntac HT 2 Grease is a "state of the art", high tech grease that has a smooth texture, and is the prime recommendation for automotive, marine and industrial applications. It is recommended for use in all applications where high thermal stability and high water resistance is required. These applications include heavy duty roller bearings, automotive, industrial, marine applications, such as, wheel bearings, pre- packed and sealedfor life bearing, trailer wheel bearing, rollers, cables and winches etc.
STANDARDS
NLGI Grade No 2
CONTAINER SIZES
180 kg 20 kg 450 gr Cartridges.
CONTACT
PROLUBE Lubricants,
P.O. Box 5435,
Telephone:
(07) 3881.1733 15 Pinacle St, Brendale, Qld. 4500.
Issue Date 13/12/2012
Fax: Email: Internet:
(07) 3881.1708 admin@prolube .com.au www.prolube.com.au
PRODUCT INFORMATION SHEET
Product Name: SYNTEGRA 5W30 SN CF PRODUCT
Prolube Syntegra 5W30 is a fully synthetic motor oil which uses the latest additive technology to provide significantly better performance in late model petrol and diesel engines. It is suitable for naturally aspirated and turbocharged motors. It ensures better rust and corrosion protection, less oil oxidation and superior deposit control and wear protection. This product is particularly recommended where the manufacturer requires the use of lower viscosity multigrade oil or where vehicles encounter lower temperature operation, providing superior component protection at cold start-up.
Viscosity Typical 12.2 cSt @ 100oC
APPLICATION
This oil is designed for late model 4 stroke petrol and engines, particularly multi- valve, multi-cam models requiring a low viscosity oil for fuel economy, low emissions and high performance. It is also ideal for modern car and SUV diesel engines. It has been formulated for applications where 5W30 to 10W30 engine oils are specified. Suitable for passenger vehicles fitted with Diesel Particulate Filters (DPF).
STANDARDS
Meets or exceeds the following: SAE Grade: 5W30 API: SM, SN, CF ACEA: C2- 10, C3 -10 (2010) MB 229.51 VW 505 00, 505 01, 502 00 BMW Longlife 4 Porsche PSA B712290 Suitable for use where GM Dexos 2 ® is specifiied
. CONTAINER SIZES
205 Litres, 20 Litres, 5 Litres. CONTACT
PROLUBE Lubricants,
P.O. Box 5435, Telephone: (07) 3881 1733 15 Pinacle Street, Brendale, Qld. 4500.
Fax: Email: Internet:
(07) 3881 1708 admin@prolube .com.au www.prolube.com.au
Issue Date 16/8/2012
PRODUCT INFORMATION SHEET
Product Name: SYNTEGRA 5W40 SN CF PRODUCT
Prolube Syntegra 5W40 is a fully synthetic motor oil which uses the latest additive technology to provide significantly better performance in late model petrol and diesel engines. It is suitable for naturally aspirated and turbocharged motors. It ensures better rust and corrosion protection, less oil oxidation and superior deposit control and wear protection. This product is particularly recommended where the manufacturer requires the use of lower viscosity multigrade oil or where vehicles encounter lower temperature operation, providing superior component protection at cold start-up.
Viscosity Typical 14.3 cSt @ 100oC
APPLICATION
This oil is designed for late model 4 stroke petrol engines, particularly multi-valve, multi-cam models requiring a low viscosity oil for fuel economy, low emissions and high performance. Syntegra 5W40 is also suitable for modern car and SUV diesels and for four stroke motorcycles fitted with wet clutches. It has been formulated for applications where 5W30 to10W40 engine oils are specified.
STANDARDS
Meets or exceeds the following: SAE Grade: 5W40 API: SM, SN, CF ACEA: C2- 10, C3 -10 (2010) MB 229.51 VW 505 00, 505 01, 502 00 BMW Longlife 4 Porsche PSA B712290
. CONTAINER SIZES
205 Litres, 20 Litres, 5 Litres. CONTACT
PROLUBE Lubricants,
P.O. Box 5435, Telephone: (07) 3881 1733 15 Pinacle Street, Brendale, Qld. 4500.
Fax: Email: Internet:
(07) 3881 1708 admin@prolube .com.au www.prolube.com.au
Issue Date 16/8/2012
PRODUCT INFORMATION SHEET
Product Name: SYNTEGRA 10W50 CH4 SJ FULLY SYNTHETIC ENGINE OIL
PRODUCT
Prolube Syntegra 10W50 is a multi-function diesel/petrol/LPG engine oil incorporating the latest developments in synthetic lubricant technology. It provides enhanced engine component protection in high load, high performance and competition applications. There is the potential to significantly expand drain cycles and to achieve gains in fuel economy as well as an upgraded capacity to withstand extreme heat and humidity.
Viscosity Typical 14.5 cSt @ 100oc Typical 104 cSt @ 40oc
APPLICATION
This oil is designed for all 4-stroke motors using LP, ULP, PULP, LPG and diesel fuels including multi-valve, turbo-charged and super-charged models. It has been specifically designed for extended drain service intervals in extreme conditions and wide temperature variations. Oil analysis is recommended to achieve optimum drain periods.
STANDARDS
Meets or exceeds the following: SAE Grade: 10W50 API: CH4 SJ ACEA: 07 E2, 02 E3/A2/B3 MB 228.1, 229.1 MAN 271 Volvo VDS 2 Mack EO M Plus Cummins 20071, 20076
CONTAINER SIZES
205 Litres, 20 Litres. CONTACT
PROLUBE Lubricants,
P.O. Box 5435, Telephone: (07) 3881 1733 15 Pinacle Street, Brendale, Qld. 4500.
Fax: Email: Internet:
(07) 3881 1708 admin@prolube .com.au www.prolube.com.au
Issue Date 11/10/12
PRODUCT INFORMATION SHEET
Product Name: SYNTEGRA 75W85 GL 4 PRODUCT
Prolube Syntegra 75W85 gear oil is a full synthetic manual transmission lubricant that will provide better synchroniser performance, improve gear shifting at cold start, superior oxidation stability and extend drain intervals. Syntegra 75W85 improves synchroniser performance and gear shift, reduced wear and extended life, extended drain intervals, excellent thermal stability. Syntegra 75W85 is also compatible with mineral oils so there is no need for a major flush to be carried out prior to changeover under normal circumstances.
Viscosity Typical 12.5 cSt @ 100oc
APPLICATION
Syntegra 75W85 is recommended for all manual gearboxes, transaxles and transfer cases where the manufacturer specifies API GL 3 or 4 75W85 or 80w viscosity oil. Use where extreme service conditions are experienced or for competition and performance applications. Extended drain intervals should be regularly monitored through laboratory analysis.
STANDARDS
Meets or exceeds the following: SAE Grade: 75W85 API: GL3 / GL4
CONTAINER SIZES
205 Litres, 20 Litres, 5 Litres. CONTACT
PROLUBE Lubricants,
P.O. Box 5435, Telephone: (07) 3881.1733 15 Pinacle St, Brendale, Qld. 4500.
Fax: Email: Internet:
(07) 3881.1708 admin@prolube .com.au www.prolube.com.au
Issue Date 26/6/2012
Appearance Density, Kg/Lt at 15oc
Visual D.1298
Brown 0.860
Viscosity, cSt at 40oc D.445 99.7 at 100oc D.445 12.8
Viscosity Index D.2270 125 Flash Point, PM closed,oc D.93 160 Pour Point, oc D.97 -43 Foaming characteristics, 10 mins Settling - D.892 Sequence 1 Nil Sequence 2 Nil Sequence 3 Nil Ash, Sulphated % Mass D.482 <0.01 Sulphur, % Mass D.129 0.95 Phosphorus, % Mass D.1091 0.049 Nitrogen, % Mass Kjeldahl 0.315 Boron, % Mass Proprietary 0.009
TYPICAL TEST ASTM METHOD
SAE 75W/85
PRODUCT INFORMATION SHEET
Product Name: SYNTEGRA 75W85 GL 4 PRODUCT
Prolube Syntegra 75W85 gear oil is a full synthetic manual transmission lubricant that will provide better synchroniser performance, improve gear shifting at cold start, superior oxidation stability and extend drain intervals. Syntegra 75W85 improves synchroniser performance and gear shift, reduced wear and extended life, extended drain intervals, excellent thermal stability. Syntegra 75W85 is also compatible with mineral oils so there is no need for a major flush to be carried out prior to changeover under normal circumstances.
Viscosity Typical 12.5 cSt @ 100oc
APPLICATION
Syntegra 75W85 is recommended for all manual gearboxes, transaxles and transfer cases where the manufacturer specifies API GL 3 or 4 75W85 or 80w viscosity oil. Use where extreme service conditions are experienced or for competition and performance applications. Extended drain intervals should be regularly monitored through laboratory analysis.
STANDARDS
Meets or exceeds the following: SAE Grade: 75W85 API: GL3 / GL4
CONTAINER SIZES
205 Litres, 20 Litres, 5 Litres. CONTACT
PROLUBE Lubricants,
P.O. Box 5435, Telephone: (07) 3881.1733 15 Pinacle St, Brendale, Qld. 4500.
Fax: Email: Internet:
(07) 3881.1708 admin@prolube .com.au www.prolube.com.au
Issue Date 26/6/2012
PRODUCT INFORMATION SHEET
Product Name: SYNTEGRA 75W90 GL5 SYNTHETIC LONG DRAIN GEAR LUBRICANT
PRODUCT
Prolube Syntegra 75W90 is an extreme heavy-duty multi-application driveline lubricant featuring full blend synthetic technology. It has been formulated for manual gearboxes, transfer cases and differentials including standard, limited slip and locking types. It provides outstanding gear, synchroniser and bearing lubrication as well as excellent cold flow and gearshift quality. In addition, there is the potential to significantly extend drain cycles.
Viscosity Typical 14.5 cSt @ 100oc Typical 104 cSt @ 40oc
APPLICATION
This oil is designed for most automotive, transport and heavy equipment gear applications subject to equipment manufacturers' recommendations. It has been specifically designed for severe service high-heat, high-load and constant running commercial situations.
STANDARDS
SAE Grade: 75W90 API GL5 US Steel 224 MT-1 Cincinnati Milacron MIL-L-2105D, MIL-PRF-2105E, SAEJ2360 AGMA 250.04 Mack GO-J
CONTAINER SIZES
205 Litres, 20 Litres. CONTACT
PROLUBE Lubricants,
P.O. Box 5435, Telephone: (07) 3881 1733 15 Pinacle Street, Brendale, Qld. 4500.
Fax: Email: Internet:
(07) 3881 1708 admin@prolube .com.au www.prolube.com.au
Issue Date 11/10/12
PRODUCT INFORMATION SHEET
Product Name: SYNTEGRA 75W140 GL5 SYNTHETIC LONG DRAIN GEAR LUBRICANT
PRODUCT
Prolube Syntegra 75W140 is an extreme heavy-duty multi-application driveline lubricant featuring full blend synthetic technology. It has been formulated for manual gearboxes, transfer cases and differentials including standard, limited slip and locking types. It provides outstanding gear, synchroniser and bearing lubrication as well as excellent cold flow and gearshift quality. In addition, there is the potential to significantly extend drain cycles.
Viscosity Typical 25.3 cSt @ 100oc Typical 197 cSt @ 40oc
APPLICATION
This oil is designed for most automotive, transport and heavy equipment gear applications subject to equipment manufacturers' recommendations. It has been specifically designed for severe service high-heat, high-load and constant running commercial situations.
STANDARDS
Meets or exceeds the following: SAE Grade: 75W140 API: GL5.
CONTAINER SIZES
205 Litres, 20 Litres. CONTACT
PROLUBE Lubricants,
P.O. Box 5435, Telephone: (07) 3881 1733 15 Pinacle Street, Brendale, Qld. 4500.
Fax: Email: Internet:
(07) 3881 1708 admin@prolube .com.au www.prolube.com.au
Issue Date 11/10/12
PRODUCT INFORMATION SHEET
Product Name: SYNTEGRA A5B5 PRODUCT
Prolube Syntegra A5B5 is a fully synthetic motor oil designed for use in high performance gasoline and light duty diesel engines that are specifically designed to use a low viscosity oil. This high SAPS product provides excellent fuel economy and protection against wear and oil oxidation to meet the longer oil drain requirements of many modern European, Korean and Japanese vehicles.
Viscosity Typical 9.9 cSt @ 100oC
APPLICATION
Prolube Syntegra A5B5 is designed for use in high performance gasoline and light duty diesel engines which require oils meeting ACEA A5B5 specifications. Syntegra A5B5 is an energy conserving, "low viscosity" type engine oil formulated to give the maximum performance in current technology engines. It is also approved against Ford specification WSS-M2C913-C for additional fuel economy benefits in Ford engines used in all current Ford cars plus many Volvo, Jaguar and Land-Rover. This oil is unsuitable for some engines especially where diesel particulate filters are fitted - consult owner manual or handbook if in doubt.
STANDARDS
Meets or exceeds the following: SAE Grade: 5W30 ACEA A5B5-10 (2010) Ford WSS-M2C-913C
. CONTAINER SIZES
205 Litres, 20 Litres, 5 litres. CONTACT
PROLUBE Lubricants,
P.O. Box 5435, Telephone: (07) 3881 1733 15 Pinacle Street, Fax: (07) 3881 1708 Brendale, Qld. 4500. Email: admin@prolube .com.au Internet: www.prolube.com.au
Issue Date 9/1/2014
PRODUCT INFORMATION SHEET
Product Name: SYNTEGRA C1 PRODUCT
Prolube Syntegra C1 is fully synthetic motor oil formulated to meet the specific fuel economy requirements of modern passenger car diesel engines with diesel particulate filters (DPFs). Syntegra C1 is formulated with the latest Ultra Low SAPS additive technology to provide a stable, stay in grade product to meet the ACEA C1 specifications. This product provides excellent fuel economy and protection against wear and oil oxidation to meet the longer oil drain requirements of many modern European diesels.
Viscosity Typical 9.7 cSt @ 100oC APPLICATION
Prolube Syntegra C1 is designed for use in high performance gasoline and light duty diesel engines where advanced after-treatment systems such as Diesel Particulate Filters (DPFs) and Three Way Catalysts (TWC) are used. Syntegra C1 meets the requirements of modern diesel powered vehicles requiring ACEA C1 or C2 specification lubricants. This especially applies to many European manufactured vehicles. Syntegra C1 is recommended for use where the manufacturer specifies a C4 type oil.
STANDARDS
Meets or exceeds the following: SAE Grade: 5W30 ACEA C1-10 (2010) C2-10 (2010) Ford WSS-M2C-934B
. CONTAINER SIZES
205 Litres, 20 Litres, 5 litres.
CONTACT
PROLUBE Lubricants,
P.O. Box 5435, Telephone: (07) 3881 1733 15 Pinacle Street, Fax: (07) 3881 1708 Brendale, Qld. 4500. Email: admin@prolube .com.au Internet: www.prolube.com.au
Issue Date 9/1/2014
PRODUCT INFORMATION SHEET
Product Name: SYNTEGRA EUROTEC 5W30
PRODUCT
Prolube Syntegra Eurotec 5W30 is a fully synthetic motor oil formulated to meet the latest technical requirements of a wide variety of modern petrol and diesel engines. Incorporating the latest SAPS (Sulphated Ash, Phosphorous and Sulphur) additive technology, it is suitable for a wide variety of today's FSI, TDI and Turbocharged engines. Using synthetic oils provides exceptional fuel efficiency.
Viscosity Typical 12.0 cSt @ 100oC
APPLICATION
Prolube Syntegra Eurotec 5W30 carries full VW approval for specifications requiring 504.00 (Petrol Engines) and 507.00 (Diesel Engines), plus the latest approvals for Mercedes Benz and BMW. It also meets the ACEA C3-08 (2008) specification required for Diesel engines fitted with Diesel Particulate Filters (DPF), Catalytic Convertors and Three Way Catalyst (TWC).
Prolube Syntegra Eurotec 5W30 meets the Japanese JASO DL-1specification, required for many Japanese diesel passenger cars.
STANDARDS
Meets or exceeds the following: SAE Grade: 5W30 ACEA: C3-12 MB 229.51, VW 504 00, 507 00 BMW Longlife 4 Porsche C30
. CONTAINER SIZES
205 Litres, 20 Litres.
CONTACT
PROLUBE Lubricants,
P.O. Box 5435,
Telephone:
(07) 3881 1733 15 Pinacle Street, Brendale, Qld. 4500.
Fax: Email: Internet:
(07) 3881 1708 admin@prolube .com.au www.prolube.com.au
Issue Date 21/11/2013
PRODUCT INFORMATION SHEET
Product Name: SYNTEGRA EZIFLOW 5W20 GF5 SN
PRODUCT
Prolube Syntegra Eziflow is a fully synthetic motor oil formulated to meet the latest technical requirements of modern petrol and diesel engines. It is specifically targeted to the latest ILSAC and API requirements. The modern additive technology provides excellent protection against engine and valve train wear, while controlling oxidation and catalytic converter fouling. Using synthetic oils provides exceptional fuel efficiency.
Viscosity Typical 7.9 cSt @ 100oC
APPLICATION
Prolube Syntegra Eziflow meets the requirements of ILSAC GF5 and API SN specifications, making it the recommendation for Chrysler, Ford and GM service fill. Syntegra Eziflow is also recommended where GM Dexos® 1 is specified.
STANDARDS
Meets or exceeds the following: SAE Grade: 5W20 API SN, SM ILSAC GF5 GM 6094M Ford WSS-M2C-945A/946A Chrysler MS 6395
. CONTAINER SIZES
205 Litres, 20 Litres, 5 Litres.
CONTACT
PROLUBE Lubricants,
P.O. Box 5435, Telephone: (07) 3881 1733 15 Pinacle Street, Fax: (07) 3881 1708 Brendale, Qld. 4500. Email: admin@prolube .com.au Internet: www.prolube.com.au
Issue Date 9/1/2014
PRODUCT INFORMATION SHEET
Product Name: SYNTEGRA GEAR OIL 1500 Synthetic Industrial Gear Oil
PRODUCT
Prolube Syntegra Gear Oil 1500 is a synthetic based industrial gear oil blended from the highest quality synthetic base oils together with the finest gear oil additives. It has outstanding thermal stability and provides excellent protection against corrosion. It has excellent viscosity retention at high loads and temperatures and is suitable for heavy duty applications in industry and mining.
Grade (ISO Viscosity) 1500Viscosity ( Typical cSt @ 40oC) 1500Viscosity ( Typical cSt @ 100oC) 77
APPLICATION
Prolube Syntegra Gear Oil 1500 is recommended for use where a very high viscosity gear oil is recommended. Typical uses are in heavily loaded industrial gearboxes operating at low speeds such as worm drives, winches and traction motors. Also useful as a lubricant for high impact load bearings, or slow speed high load roller bearings. Can be used in some high load impact tools where a high viscosity oil is recommended .
STANDARDS
Meets or exceeds the following: US Steel 224 AGMA: 250.04 Cincinnati Milacron
CONTAINER SIZES
205 litres 20 Litres.
CONTACT
PROLUBE Lubricants,
P.O. Box 5435, Telephone: (07) 3881 1733 15 Pinacle Street, Brendale, Qld. 4500.
Fax: Email: Internet:
(07) 3881 1708 admin@prolube .com.au www.prolube.com.au
Issue Date 1/7/13
PRODUCT INFORMATION SHEET
Product Name: SYNTEGRA GEAR OIL SERIES Synthetic Industrial Gear Oils
PRODUCT
Prolube Syntegra Gear Oil 150, 220, 320, 460 are fully synthetic industrial gear oils that are blended from the highest quality synthetic base oils together with the finest gear oil additives. They have outstanding thermal stability and provide excellent protection against corrosion. They are suitable for a wide range of applications in industry and mining.
Grade (ISO Viscosity) 150 220 320 460 Viscosity ( Typical cSt @ 40oC) 150 220 320 460 Viscosity ( Typical cSt @ 100oC) 18.0 23.5 30.0 36.5
APPLICATION
These oils are designed for a wide range of applications in industrial gear systems. Ideal for high temperature and longer drain applications.
STANDARDS
Meets or exceeds the following: US Steel 224 AGMA: 250.04 Cincinnati Milacron
CONTAINER SIZES
205 Litres, 20 Litres.
CONTACT
PROLUBE Lubricants,
P.O. Box 5435,
Telephone:
(07) 3881 1733 15 Pinacle Street, Brendale, Qld. 4500.
Fax: Email: Internet:
(07) 3881 1708 admin@prolube .com.au www.prolube.com.au
Issue Date 11/10/2012
PRODUCT INFORMATION SHEET
Product Name: SYNTEGRA TRANSAXLE 450 PRODUCT
Prolube Syntegra Transaxle 450 is sophisticated, fully synthetic transmission oil that has been developed for use in Road Ranger transmissions and for automotive and industrial applications where extreme pressure properties are not required. The extremely high viscosity index and very low pour point provide a highly adhesive film to allow superior protection to gear teeth and bearings against wear.
Viscosity Typical 19.4 cSt @ 100oc
APPLICATION
Syntegra Transaxle 450 can also be used where manufacturers' recommendation is for API GL-1 gear oil. It can also be used to lubricate various manual transmissions, spiral bevel axle assemblies and worm gear drives on commercial, farm and truck equipment.
STANDARDS
API GL-1 CONTAINER SIZES
205 Litres, 20 Litres.
CONTACT
PROLUBE Lubricants,
P.O. Box 5435, Telephone: (07) 3881 1733 15 Pinacle Street, Brendale, Qld. 4500.
Fax: Email: Internet:
(07) 3881 1708 admin@prolube .com.au www.prolube.com.au
Issue Date 4/10/2012