SANI-MIST SANITIZING SYSTEM

SEE PRODUCT LINE AND SPECS ON THE BACK PAGE OF THIS HOT SHEET

3-PLY POLYPROPYLENE FACE MASK LIGHT BLUE WITH EAR LOOPS

Part No. Qty865.1015 Box of 50865.1015.1 Case of 40 Boxes

• Polypropylene• Light Blue• One size fits all• Spun-bonded polypropylene; 3-layer, pleated• Anti-fog sweatband across bridge of nose• Meets FDA requirements as specified in CFR Code 21• 99.5% bacterial filtration protects from harmful contaminants in the air

2-PLY NON MEDICAL RE-USEABLE COTTON SAFETY MASK BLACK COTTON WITH EAR LOOPS

Part No. Qty865.1020 Single Mask

Great For:• Sherriff’s departments• Factories and factory settings• Medical supply shop• Shooting ranges• Real estate agents

• Traffic management• Volunteer organizations• Hospital system applications• Essential workers

• 2-ply cotton masks with ear straps• Non-medical mask

Download and print this issue from our website!www.winzer.com/resource_center

SERV

ICE

THAT

WO

RKS®

PRODUCT HIGHLIGHTSafety - Pgs 4 - 5

Ed. 2

0 Vo

l. 7

FASTENERS

METRIC JIS HEX HEAD CAP SCREWS 8.8 REDUCED HEAD

Diameter D M8 M10 M12Height Max H 5.65 7.2 8.2W.A.F. Max F 12 14 17W.A.C. G 13.45 15.85 19.38Thread Pitch 1.25 1.25 1.25

JIS-B1180

Proof Load PSI: 84100Tensile Strength PSI: 116000Plating: Zinc

Part No. D L (mm)060.8.12 M8** 12060.8.16 M8** 16060.8.20 M8** 20060.8.25 M8** 25060.8.30 M8** 30060.8.35 M8** 35060.8.40 M8** 40060.8.45 M8 45060.8.50 M8 50060.8.60 M8** 60060.8.65 M8 65060.8.70 M8 70060.8.75 M8 75

**= Fully Threaded

Part No. D L (mm)060.8.80 M8 80060.10.20 M10** 20060.10.25 M10** 25060.10.30 M10** 30060.10.35 M10** 35060.10.40 M10** 40060.10.45 M10** 45060.12.50 M10** 50060.10.60 M10 60060.10.70 M10 70060.10.75 M10 75060.10.80 M10 80060.10.85 M10 85

Part No. D L (mm)060.10.90 M10 90060.12.20 M12** 20060.12.25 M12** 25060.12.30 M12** 30060.12.35 M12** 35060.12.40 M12** 40060.12.50 M12 50060.12.60 M12 60060.12.70 M12 70060.12.80 M12 80060.12.90 M12 90

Part No. D L (mm)061.6.12 M6 12061.6.16 M6 16061.6.20 M6 20061.6.25 M6 25061.6.30 M6 30061.6.35 M6 35061.6.40 M6 40061.6.45 M6 45061.6.50 M6 50061.6.55 M6 55061.8.12 M8 12061.8.16 M8 16061.8.20 M8 20

METRIC JIS HEX HEAD CAP SCREWS 10.9 REDUCED HEAD

Part No. D L (mm)061.8.25 M8 25061.8.30 M8 30061.8.35 M8 35061.8.40 M8 40061.8.45 M8 45061.8.50 M8 50061.8.60 M8 60061.8.70 M8 70061.10.16 M10 16061.10.20 M10 20061.10.25 M10 25061.10.30 M10 30061.10.35 M10 35

Part No. D L (mm)061.10.40 M10 40061.10.45 M10 45061.10.50 M10 50061.10.60 M10 60061.10.70 M10 70061.12.20 M12 20061.12.25 M12 25061.12.30 M12 30061.12.35 M12 35061.12.40 M12 40061.12.45 M12 45061.12.50 M12 50061.12.55 M12 55

Diameter D M6 M8 M10 M12Height H 6 8 10 11.5W.A.F. F 10 12 14 17Flange Dia. A 14 17.5 21 25Thread Pitch 1.00 1.25 1.25 1.25

JIS-B1189

Proof Load PSI: 120350Tensile Strength PSI: 145000Plating: Zinc

Part No. D L (mm)047.3.4 M3 4047.3.8 M3 8

047.3.10 M3 10047.3.12 M3 12047.3.16 M3 16047.3.20 M3 20047.3.25 M3 25047.3.30 M3 30047.4.6 M4 6047.4.8 M4 8

047.4.10 M4 10047.4.12 M4 12047.4.14 M4 14047.4.16 M4 16047.4.20 M4 20047.4.25 M4 25047.4.30 M4 30047.4.35 M4 35

METRIC JIS PAN PHILLIPS MACHINE SCREWS REDUCED HEAD

Part No. D L (mm)047.4.40 M4 40047.4.45 M4 45047.4.50 M4 50047.4.55 M4 55047.4.60 M4 60047.5.6 M5 6047.5.8 M5 8

047.5.10 M5 10047.5.12 M5 12047.5.16 M5 16047.5.18 M5 18047.5.20 M5 20047.5.25 M5 25047.5.30 M5 30047.5.35 M5 35047.5.40 M5 40047.5.45 M5 45047.5.50 M5 50

Part No. D L (mm)047.5.55 M5 55047.6.8 M6 8

047.6.10 M6 10047.6.12 M6 12047.6.14 M6 14047.6.16 M6 16047.6.18 M6 18047.6.20 M6 20047.6.25 M6 25047.6.30 M6 30047.6.35 M6 35047.6.40 M6 40047.6.45 M6 45047.6.50 M6 50047.6.60 M6 60047.6.70 M6 70047.6.80 M6 80

047.6.100 M6 100

Diameter D M3 M4 M5 M6Height H 2.0 2.6 3.3 3.9Head Dia. A 5.5 7.0 8.75 10.5Pitch .50 .70 .80 1.0

JISB-1111

Material: SteelFully ThreadedPlating: Zinc

2 Service That Works... Products That Perform

FASTENERS (CONT.)

ELECTRICAL

Part No. D L (mm)061.6.101 M6 10061.6.121 M6 12061.6.161 M6 16061.6.201 M6 20061.6.251 M6 25061.6.301 M6 30061.6.351 M6 35061.6.401 M6 40

METRIC JIS SMOOTH DOME HEX FLANGE BOLTS REDUCED HEAD

Part No. D L (mm)061.6.451 M6 45061.6.551 M6 55061.6.601 M6 60061.8.201 M8 20061.8.301 M8 30061.8.401 M8 40061.8.501 M8 50

Diameter D M6 M8Height H 5 7W.A.F. F 8 10Flange Dia. A 11 14Thread Pitch 1.00 1.25

JIS-B1189

Proof Load PSI: 120350Tensile Strength PSI: 145000Plating: Zinc

MCASE+™ 32 VOLT FUSES

Part No.10 Piece

Bulk PacksColorCode

AmpRating

729.5015 Gray 15729.5020 729.5020.10 Blue 20729.5025 White 25729.5030 Pink 30729.5040 729.5040.10 Green 40729.5050 Red 50729.5060 Yellow 60

• The slotted MCASE+™ fuse can mate with larger male terminals (eg., 6.3mm)• Can also mount directly onto a busbar• Miniaturized footprint for optimal usage of space• Time delayed fuse and can handle inrush currents• Conforms to SAE 2741 and ISO 8820-4 in reference to electrical, mechanical and

environmental performance requirements

SLOTTED

Part No.ColorCode

AmpRating

729.1.5015 Gray 15729.1.5020 Blue 20729.1.5025 White 25729.1.5030 Pink 30729.1.5040 Green 40

• The unslotted MCASE+ Fuse is a cartridge style fuse up to 40A with female terminals for 2.8mm male terminals.

• Miniaturized footprint for optimal usage of space, featuring time delay and the ability to handle inrush currents

UNSLOTTED

• Heavy-duty bi-metal construction• Extra wide, extra thick for heavy-feed and stability• Preferred by professional firefighters• For all types of machinable metal encountered in vehicle extraction and demolition• Superior performance in sheet metal and vehicle frames

Part No. TPIL x W x T(Inches)

660.3100 10 6” x 7/8” x .062”660.3101 10 9” x 7/8” x .062”660.3102 10 12” x 7/8” x .062”660.3103 14 6” x 7/8” x .062”660.3104 14 9” x 7/8” x .062”660.3105 14 12” x 7/8” x .062”

FIRE AND RESCUE RECIPROCATING BLADES

CUTTING TOOLS

Part No. Diameter771.06.4364 3/64”771.06.4116 1/16”771.06.4332 3/32”771.06.418 1/8”771.06.438 3/8”771.06.434 3/4”

• A flexible, non-adhesive lined general-purpose tubing• 2-to-1 shrink ratio• Temperature Range: -67° F to +275° F• Meets MIL-DTL-23053/5 Class 1, 2• Color: White• Length: 4’• UL Listed UL224-VW-1 (except Clear)

POLYOLEFIN STANDARD HEAT-SHRINK TUBING NEW

HAND SANITIZER 80% ISOPROPYL ALCOHOL

• 80% alcohol antiseptic• Meets the 1/31/20 FDA recommendation

for hand sanitizers relating to Covid-19• 8 oz bottle

Part No. Description994.00.03 8 oz

CHEMICALS

3Service That Works... Products That Perform

SAFETY

• Hi-viz lime• 100% polyester birdseye mesh• Moisture wicking• Left chest pocket• ANSI Class 2• Conforms to ANSI/ISEA 107-2015

Part No. Size865.1350 Medium865.1351 Large865.1352 X-Large865.1353 XX-Large

SAFETY T-SHIRT LIME

Part No. Size867.02.7010 Medium867.02.7011 Large867.02.7012 X-Large867.02.7013 XX-Large

• Level 3 cut protection HPPE comfortable machine knit shell• Durable latex textured grip• Safety orange palm• Gray liner helps conceal dirt and wear• TPR bumpers offer back of hand impact protection• Easily identifiable color-coded cuff by size

CUT-RESISTANT GLOVES

Part No. Color865.3.1160 Orange865.3.1161 White865.3.1162 Yellow865.3.1163 Blue865.3.1164 Hi-Viz Green

• 6-point ratchet nylon suspension• Lightweight polyethylene• Adjustable head cradle• Soft brow band• Meets ANSI 289.1-2003 Standard Type 1, Class G & E

OMEGA II SIX-POINT RATCHET CAP HARD HATS

Part No. Size867.02.700 Large867.02.702 X-Large

• Impact glove• Nitrile sandy palm coated• TPR padding to protect fingers and back of hand from impact• A2 - 900 grams• ANSI/ISEA 105-2016

TPR IMPACT GLOVES

• Closure: Hook and loop• Color: Hi-viz green• Material: 100% polyestermesh• 2” Silver tape reflective material, 1 horizontal stripe• Meets requirements of ANSI/ISEA 107-2004

Part No.10-PackPart No. Size

865.1260 865.1260.1 Large865.1262 865.1262.1 X-Large865.1264 865.1264.1 XX-Large865.1266 865.1266.1 XXX-Large

SAFETY VEST ECONOMY CLASS 2

• 6-point nylon suspension• Quick-slide sizing adjusts suspension from head sizes 6 - 12• Molded from high-density polyethylene for maxium protection• Meets ANSI Z89.1-2003 standard type 1, class C, E & G requirements• Made in the USA

Part No. Color865.3.1070 Yellow

ECONOMY HARD HAT

4 Service That Works... Products That Perform

SAFETY (CONT.)

• No roll-down design for quick/easy fitting• Threads designed to create a stay-put seal• Advanced foam formulation• Excellent comfort• NRR: 30 dB

Part No. Description865.4.215 Corded865.4.216 Uncorded

SKULL SCREWS™ EAR PLUGS

• Contrasting trim detail• Materials: Self extinguishing treated 100% polyester mesh• Fits both cap-style and full brim hard hats• High-visibility green

NECK SHADE

Part No.865.1123

• Face shield with headband• Equipped with a foam band and headband• Can be worn with or without glasses or goggles• Resistant to fogging• Clear for maximum visibility

MEDICAL FACE SHIELD WITH FOAM PADDING

Part No.994.00.01

Designed for procedures and environments where the risk of exposure to contaminated fluids through splashing is possible

• Dimensions: 26” x 8.25”• Heat stress safety management• Reusable packaging design• Safe and reusable, jobsite proven• Lasts up to 5 hours, depending on humidity levels• Secure around neck by pulling through slot opening• Anti-microbial treated helps prevent mold build-up and odors

ARTIC RADWEAR COOLING WRAP

Part No.865.1122

*This kit does not meet the ANSI 2015 Safety Standards

Part No. DescriptionBox Qty

865.1105 Plastic Bandage 16 ct865.1106 Trauma Pad, 5" x 9" 1 ea

865.1108 Triangular Bandage 40" x 40" x 56" 1 ea

865.1109 Sterile Gauze Pads 3" x 3" 4 ct865.1110 Antiseptic Wipes 10 ct

Part No. DescriptionBox Qty

865.1112 Burn Relief 6 ct865.1113 Cold Pack 4" x 5" 1 ea865.1115 Cloth Tape 1/2" x 2.5 yds 1865.1116 Nitrile Exam Gloves 10 pr

• Treats 10 or more people• 71 pieces• Ideal for home, car or small office

10-PERSON FIRST AID KIT

Part No.865.1102

KIT INCLUDES

• Combining protective safety glasses with reading glasses• Cushioned non-slip rubber temple pads• Vented rubber nosepiece• Magnification diopter molded into the lens

Part No. Lens Color865.2.1107 Clear 1.0865.2.1103 Clear 1.5865.2.1104 Clear 2.0865.2.1108 Clear 2.5865.2.1109 Clear 3.0865.2.1105 Smoke 1.5865.2.1106 Smoke 2.0

CHEATERS SAFETY GLASSES

• Material: Foam• NPR (max): 33• 100% PVC-Free• Independently tested to ANSI S3.19-1974• Includes mounting bracket and hardware• Made in the USA

Part No. Description865.4.203 250 Pair

EAR PLUG STATION

5Service That Works... Products That Perform

SECURITY

FLUID POWER

• Note: Not all hydraulic hoses have the same O.D.• Measure the hose O.D.; fit to the closest I.D. of the spiral wrap.

Part No.HoseI.D.

OverallLength

298.005.4 .50” 25’298.005.6 .667” 25’298.005.810 .80” 25’298.005.12 1.00” 20’298.005.1620 1.375” 12’298.005.24 1.70” 10’

HYDRAULIC HOSE PROTECTION - SPIRAL WRAP HD

• Made for safety lockout use• Special “saftey lockout” markings• Non-conductive Xenoy body • Extra-long steel shackle• Key retaining for added security• 6-pin tumbler

Part No. Color604.9010 Red604.9011 Blue604.9012 Yellow604.9014 Green

410 SERIES SAFETY LOCKOUT LOCKS

• 1” diameter jaws• Tamper-resistant scissor style• Allows up to 6 locks

SAFETY LOCKOUT HASP

Part No.604.9013

Part No. Color979.0052 Red979.0053 Yellow979.0054 Green

EQUIPMENT LOCKOUT TAGS

• Vivid colors• Blank lines to personalize

your information

AIR LINE FITTINGS ACCESSORIES

• Traps moisture, rust, scale and oil aerosols that pass through conventional filters

• Air inlet and outlet NPT: 1/4”

WATER FILTER FOR SPRAY GUNS

Part No.697.437

• Swivel ‘L’ adapter 90°• Material: CA360 Brass

Part No.Pipe Size

MalePipe SizeFemale

674.21.44 1/4” 1/4”

AIR LINE ADAPTER AIR REGULATOR WITH GAUGE

• Provides fine-air control for spray guns and air tools• Swivel top for easy installation• Includes a 0-160 PSI pressure gauge• Air inlet and outlet NPT: 1/4”

Part No.697.435

• 360° F swivel helps eliminate kink• Steel black oxide finish

Part No.HoseI.D.

HoseO.D.

MaleNPT

688.6581 3/8” 11/16” 1/4”

FULL SWIVEL HOSE END

Part No.Pipe

ThreadBerg

Part No.679.12.66 1/4” 121565-060

BRASS AIR TANK DRAIN VALVE

Part No.Pop-OffPressure

Air Flow Pop-Off PSI

MaleNPT

688.1090.150 150 PSI 140 CFM 1/4”

SAFETY RELIEF VALVE

• Operating Temperature: 40° F to 300° F• Maximum Operating Pressure: 300 PSI• Diffuses air and muffles noise from exhaust ports of cylinders, valves and air tools to

an acceptable level within OSHA noise requirements

Part No. StyleNPTSize

OverallLength Hex

688.1086.2 A 1/8” 1-1/8” 7/16”688.1086.4 A 1/4” 1-3/8” 9/16”688.1086.6 A 3/8” 1-1/2” 9/16”688.1086.8 A 1/2” 1-7/8” 7/8”688.1088.2 B 1/8” 7/16” 7/16”688.1088.4 B 1/4” 5/8” 9/16”688.1088.6 B 3/8” 3/4” 9/16”

StyleA

StyleB

PNEUMATIC EXHAUST MUFFLERS

• Abrasive Protection For: Hydraulic hoses, battery cables, wiring harness, brake systems, fuel lines, air lines, radiator hose, oil lines

• Includes: 3 wire ties with each protector• Extremely high wear factor• Formulated to resist solvents, oils, grease, gasoline etc.• Operating temperature: -40° F to +430° F• Easy installation; no need to remove hose• Color: Black

BlackPart No.

OrangePart No.

OverallLength

298.01.4 298.01.41 4”298.01.6 6”298.01.8 298.01.81 8”298.01.10 10”298.01.12 12”

HOSE PROTECTORS

6 Service That Works... Products That Perform

AUTOMOTIVE

ORGANIZATION

• Slide drawers have extra center brace for added support• Drawer-stop mechanism prevents drawer from being pulled out• Material: Cold-rolled steel• Color: Winzer Blue

LARGE SLIDE RACKS

2-DRAWER TRACK SLIDE RACK

STANDARD 4-DRAWER ROLLER BEARING SLIDE RACK

Width: 20”Height: 8-1/8”Depth: 15-3/4”Weight: 20 lbs

Width: 20”Height: 15”Depth: 15-3/4”Weight: 40 lbs

Part No.953.902

Part No.953.900

Width: 20”Height: 15”Depth: 15-3/4”Weight: 32 lbs

Width: 20”Height: 15”Depth: 12”Weight: 31 lbs

Part No.953.900.01

Part No.953.901

STANDARD 4-DRAWER TRACK SLIDE RACK

SPACE SAVER 4-DRAWERTRACK SLIDE RACK

• Secures rack contents with padlock (not included)

• Material: Steel• Plating: Zinc

LOCKING HINGE FOR SLIDE RACKS

Part No. Length953.9003 7”953.9002 13-1/2”

• For use with 953.900 rack (Standard) or 953.901 rack (Space Saver)

• Some assembly required• Material: Cold-rolled steel• Width: 20-3/8”• Color: Winzer Blue

SLIDE RACK STANDS

Part No. Description Height Depth Weight953.900.52 Standard Short Legs 5-3/4” 16” 13 lbs953.9001 Standard Tall Legs 15-1/8” 16” 15 lbs953.9011 Space Saver Tall Legs 15-1/8” 12” 13 lbs

• Steel black-coated adhesive weight in a 6 oz strip• Aftermarket 3-year optimized coating for corrosion protection• 1/2 oz segments, 6 oz per strip, 28 strips per box• Standard profile, 0.32” height, 0.787” width

BLACK-COATED ADHESIVE WHEEL WEIGHT

Part No.828.12146

NEW

• Width: 18”• Height: 3”• Depth: 12”• Color: Winzer Blue• Weight: 8 lbs• Box Material: Cold-rolled steel• Box Finish: Rust and acid-resistant baked enamel paint• Insert Material: Comes without insert; any stocked inserts will fit• Special Features: Double latch heavy-duty handle

HEAVY-DUTY LARGE STORAGE DRAWERS

Part No.953.904

WITHOUT INSERTS WITH INSERTS

Part No.953.904.20

Part No.953.904.32

Part No.953.904.16

Part No.953.904.24

Part No.953.904.12

Part No.953.904.21

• 12 Slot • 16 Slot • 20 Slot

• 21 Slot • 24 Slot • 32 Slot

7Service That Works... Products That Perform

Sani-Mist Sanitizing System

Features• Self-contained, portable system • Projects light, “damp” mist particles up to 15’• 10 precision metering tips allow the user to

refine the particle size• Durable and easy to manuever cart• 50’ hose• Tight head 5 gallon pail with draw cap

PD PRECISION MISTER

Product Description697.0037 PD Precision Mister

The PD Precision Mister is great for commercial and industrial use where large spaces inhibit the range of an air line. This cart may be used anywhere there is a power source available.

MODEL 20 COMPACT SPRAYER

The Model 20 Compact Sprayer makes disinfecting outdoor spaces simple. This system is ideal for restaurant patios, playgrounds and parks to disinfect tables, benches and seating areas.

Product Description697.0036 Model 20 Compact Sprayer

Features• Attaches to standard garden hose • Automatically dilutes concentrated disinfectant• Great performance with water pressure as low as 20 PSI• Includes 20 color-coded precision metering tips to customize dilution ratio• Disperses as a low-volume spray that dries quickly• Ergonomic handle for comfortable use

Features• Portable hose-end mister makes it easy to mist hard-to-reach areas, or

where fixed location misters are impractical• Easy to use! Just fill the bottle with pre-diluted chemical, connect

compressed air, and press the thumb-trigger activator• Heavy-duty, easy-grip trigger gun• Precision metering tips allow the user to refine the particle size and project a

lighter mist to avoid over-wetting surfaces• Lightweight 32 oz bottle

COMPACT MISTERS

Product Description697.0034 612 Low-Volume Compact Mister697.0035 633 Standard-Volume Compact Mister697.0033 305 High-Volume Compact Mister

The compact misters are specifically geared to the needs of the automotive industry. This light-weight setup is perfect for manuevering around a vehicle and around varied spaces.

Features• Active disinfectant ingredient is hydrogen peroxide• Effective against Staph, E coli and Salmonella enterica• Kills viruses with a 5 minute dwell time• Member of the EPA N-List for effectiveness against the 2019 Novel

Coronavirus• EPA EST. NO. 45745-TN-2

MAXIM FACILITY +ONE-STEP DISINFECTANT

ProductNet

Contents891.6866 1 Gallon891.6866.1 4 x 1 Gallon

A one-step hospital-use germicidal cleaner and deodorant designed for general cleaning, disinfecting, and controlling mold and mildew odors on hard, non-porous surfaces. Formulated without perfumes making it perfect for applications where lingering fragrance is not desired.

10

Ready in Four Steps

1. Clean interior surfaces

2. Disinfect area thoroughly, moving from

top to bottom

3. Wait 10 minutes for product to settle and

disinfect

4. Ready for operation

NEW

4060 E Plano ParkwayPlano, Texas 75074800-527-4126www.winzer.comCopyright © 2020 Winzer

SERVICE TH

AT WO

RKS®

Download and print this issue from our website!www.winzer.com/resource_center Ed. 20 Vol. 7