ALFIX StAIrwAy towerSProduct Information
Complete System.The ideal solution for any application.
SECURELY SCAFFOLDED
ALFIX StAIrwAy tower 200 kg/m2
ApplicAtion exAmpleStAirwAy tower 200 kg/m². AlternAting StAir flightstarting with:
01 ALBLItZ stairway 1.40 × 1.00 m
02 ALBLItZ stairway 2.07 × 1.50 m
ApplicAtion exAmpleStAirwAy tower 200 kg/m². pArAllel StAir flightstarting with:
01 ALBLItZ stairway 1.40 × 1.00 m
02 ALBLItZ stairway 2.07 × 1.50 m
01
01
02
02
ALFIX Stairway tower 200 kg/m2
Stairway tower, 4-upright
Site stairway tower — Application as site stairway tower, or
upward scaffold access, for safe material transport and as an escape route in ac-cordance with the ordinance on Industrial Safety and Health (BetrSichV).
— add-on, or integrated, access stairway for safe access
— system-compatible stairways made of aluminium
— load-bearing capacity 200 kg/m² — load class 3 — width 0.62 m — stair rise: 20 cm — average net list price per linear metre
€ 759.00 *
*For enquiries about individual linear-metre prices for your project, please refer to the Checklist on page 9 of this brochure.
ApplicAtion exAmple StAirwAy tower 200 kg/m², pArAllel StAir flight— 10 steps, rise 20 cm (per stairway)
ApplicAtion exAmple StAir guArdrAil fixed to the guardrail holder using a double bead coupler
ApplicAtion exAmple inner guArdrAil And Aluminium StAirwAy
ApplicAtion exAmple StAirwAy tower 200 kg/m², AlternAting StAir flight— 10 steps, rise 20 cm (per stairway)
1.40 m
2.57
– 3
.07
m
2
Alfix StAirwAy towerS | Product informAtion Alfix – Securely ScAffolded
2 3
ALFIX StAIrwAy tower 200 kg/m2
(assembly flight by flight)ALFIX StAIrwAy tower 200 kg/m2
(assembly flight by flight)
* For enquiries about individual linear-metre prices for your project, please refer to the Checklist on page 9 of this brochure.
entrance flight of stairs
Central flight of stairs, alter-nating stairs
Central flight of stairs
egress flight of stairs
ApplicAtion exAmpleStAirwAy tower with flight by flight ASSembly (AlternAting)
Site Stairway tower — Application as site stairway tower, or scaffold access,
for safe material transport and as an escape route in accordance with the ordinance on Industrial Safety and Health (BetrSichV).
— add-on, or integrated, access stairway for safe access — system-compatible stairways made of aluminium — load-bearing capacity 200 kg/m² — load class 3 — width 0.62 m — stair rise: 20 cm — average net list price per linear metre € 875.00*
Flight by flight assemblythe individual flights of stairs are to be attached to the stairway tower using a crane. the use of site stairway towers, with load class 3, pursuant to eN 12811-1 at 2 kN/m² is possible. According to this standard, they are grouped as a class "A" flight of stairs. the individual flights of stairs are mounted on top of the next, and are connected at all four vertical standard transitions, using the suspended scaffolding connectors 0.80 m. the stairway towers have a floor area of 3.07 m x 1.40 m or 2.57 m x 1.40 m. the stairway towers are designed for a construc-tion height up to 65.40 m and are to be assembled flight by flight.
PLeASe Note: the suspended scaffolding connector 0.80 m has to be connected to the first connecting disc above, and beneath, the vertical starter piece.
entrance flight of stairs
Central flight of stairs
Central flight of stairs
egress flight of stairs
ApplicAtion exAmpleStAirwAy tower with flight by flight ASSembly (pArAllel)
Site Stairway tower — Application as site stairway tower, or scaffold access,
for safe material transport and as an escape route in accordance with the ordinance on Industrial Safety and Health (BetrSichV).
— add-on, or integrated, access stairway for safe access — system-compatible stairways made of aluminium — load-bearing capacity 200 kg/m² — load class 3 — width 0.62 m — stair rise: 20 cm — average net list price per linear metre € 975.00*
Fig.: Suspended scaffolding connector 0.80 m in its built-in state
Flight by flight assemblythe individual flights of stairs are to be attached to the stairway tower using a crane. the use of site stairway towers, with load class 3, pursuant to eN 12811-1 at 2 kN/m² is possible. According to this standard, they are grouped as a class "A" flight of stairs. the individual flights of stairs are mounted on top of the next, and are connected at all four vertical standard transitions, with the suspended scaffolding connectors 0.80 m. the stairway towers have a floor area of 3.07 m x 1.40 m or 2.57 m x 1.40 m. the stairway towers are designed for a construc-tion height up to 65.40 m and are to be assembled flight by flight.
PLeASe Note: the suspended scaffolding connector 0.80 m has to be connected to the first connecting disc above, and beneath, the vertical starter piece.
Fig.: Suspended scaffolding connector 0.80 m in its built-in state
1.40 m
2.57 – 3.07 m
1.40 m
2.57 – 3.07 m
Alfix StAirwAy towerS | Product informAtion Alfix – Securely ScAffolded
4 5
ALFIX StAIrwAy tower 200 kg/m2
Stairway tower, 10-upright
Site stairway tower — Application as site stairway tower,
or scaffold access, for safe material transport and as an escape route in accordance with the ordinance on Industrial Safety and Health (Betr-SichV).
— stair stringers for receiving sys-tem-compatible decks (e.g. steel decks)
— load-bearing capacity 200 kg/m² — load class 3 — step width 0.73 m or 1.09 m — stair rise: 22 cm — average net list price per linear metre
€ 1,389.00*
* For enquiries about individual linear-metre prices for your project, please refer to the Checklist on page 9 of this brochure.
ALFIX StAIrwAy tower 500 kg/m2
Stairway tower, 16-upright
escape Stairway tower — Application as escape stairway, with
childproof filler-bar guardrails, and, as a temporary stairway tower in public areas
— stair stringers for receiving sys-tem-compatible decks (e.g. steel decks)
— 16-upright — load-bearing capacity 500 kg/m² — step width 1.09 m - 2.07 m — tread width 26.5 cm — stair rise: 22 cm — Customized stair stringers and guard-
rails are available for precise fitting to buildings and ground surfaces.
— average net list price per linear metre € 2,449.00*
01 Steps made of system- compatible decks
02 tube ledger 1.29 m
03 Stair stringer
ApplicAtion exAmpleSite StAirwAy tower 200 kg/m2
— 9 steps, rise 22 cm— 10 decks per stairway
ApplicAtion exAmpleeScApe StAirwAy tower 500 kg/m2
— 9 steps, rise 22 cm— 9 decks per stairway
01 Gap ledger
02 Steps made of system- compatible decks
03 Stair stringer
04 Gap cover
2.07 – 2.57 m
4.03
– 4
.75
m
0.73
– 1
.09
m2.
57 m
1.09 – 2.07 m
0.15 – 0.73 m
4.75
– 6
.71
m
1.09
– 2
.07
m2.
57 m
01
02
03
01
0203
04
Alfix StAirwAy towerS | Product informAtion Alfix – Securely ScAffolded
6 7
ALFIX StAIrwAy tower 750 kg/m2
Stairway tower, 16-upright
Stairway tower, for public events, in accordance with the Venue regulation (VStättVo)
— application as escape stairway with childproof filler-bar guardrails
— stair stringers for receiving system- compatible decks (e.g. steel decks)
— 16-upright — load-bearing capacity 750 kg/m² — step width: 1.09 m - 2.07 m — tread width: 31.5 cm — stair rise: 17 cm — Customized stair stringers, and guard-
rails, are available for precise fitting to buildings and ground surfaces.
— average net list price per linear metre € 3,169.00*
* For enquiries about individual linear-metre prices for your project, please refer to the Checklist on page 9 of this brochure.
CHeCkLISt For PrICe eNquIrIeSChecklist for Price Enquiries
Sender
Company
Street
ZIP code / City
Contact person (sender)
Phone Fax
Sales representative
ALFIX MODUL MULTI ALFIX MODUL METRIC
Site stairway tower Escape stairway tower Stairway tower for public areas
_ kg/m
_ m
Yes No
Parallel stair flight Alternating stair flight
Number of platforms: _ Platforms at heights: _ - _ -_ -_ -_ -_ - _ m
Yes No
Stability check Verifiable structural analysis
Approved structural analysis
Date / Signature
TYPE OF STRUCTURAL ANALYSIS
3. REQUIRED ADMISSIBLE LOAD-BEARING CAPACITY
4. REQUIRED STEP WIDTH
5. REQUIRED STAIR RISE
6. CHILDPROOF FILLER-BAR GUARDRAIL
7. POSITIONING OF STAIR FLIGHT
8. STAIRHEADS/TREAD
9. PROPERTY-RELATED STRUCTURAL ANALYSIS REQUIRED
10. ADDITIONAL INFORMATION
2. STAIRWAY TYPE
ApplicAtion exAmpleeScApe StAirwAy tower 750 kg/m2
— 9 steps, rise 17 cm— 8 decks per stairway
01 Gap ledger
02 Steps made of system- compatible decks
03 Stair stringer
ApplicAtion exAmple gAp coVer
01 Clamping coupler (universal design)
02 Gap cover for double upright
03 Gap cover
1.09 – 2.07 m
0.15 – 0.73 m
4.75
– 6
.71
m
1.09
– 2
.07
m2.
57 m
01
02
03
01
0102
03
Alfix StAirwAy towerS | Product informAtion Alfix – Securely ScAffolded
8 9
Notes sketches
023
59.1
170
.61
2256
.54
67.5
4
2153
.97
64.4
7
2051
.40
61.4
0
1948
.83
58.3
3
1846
.26
55.2
6
1743
.69
52.1
9
1641
.12
49.1
2
1538
.55
46.0
5
1435
.98
42.9
8
1333
.41
39.9
1
1230
.84
36.8
4
1128
.27
33.7
7
1025
.70
30.7
0
923
.13
27.6
3
820
.56
24.5
6
717
.99
21.4
9
615
.42
18.4
2
512
.85
15.3
5
410
.28
12.2
8
37.
719.
21
25.
146.
14
12.
573.
07
12345678910111213141516
Alfix StAirwAy towerS | Product informAtion Alfix – Securely ScAffolded
10 11
Sale of: — Work and safety scaffolds — Mobile scaffold towers — Weather protection roofs — Chimney scaffolds — Accessories
Hire of: — Work and safety scaffolds — Mobile scaffold towers — Weather protection roofs
www.alfix-systems.com
Edition: June 2018
ALFIX GmbHLanghennersdorfer Straße 15D-09603 Großschirma
Phone +49 (0) 37328 / 800-100Fax +49 (0) 37328 / 800-199eMail [email protected]