10
Product information Drummotors TM 215-40 V an der G raaf Power Transmission Equipment
Product information
Drummotors
TM 215-40
Van der GraafPower Transmission Equipment
2
This catalogue contains standard designs of the TM 215-40. This drummotor can be provided in steel or (partly) stainless steel (304 or 316). Stainless steel executions have different dimensions then steel executions.
For different lengths or executions please contact us or your local distributor.
We reserve the right to change technical specifications.
TM 215-40
Introduction
Address details
© 04/2009 Van der Graaf B.V.
IndexTM 215-40 2
IntroductionAddress details
Product overview TM 215-40 3Dimensions drummotors 4
TM 215A40TM 215B40TM 215A40 CR (RVS)TM 215B40 CR (RVS)
Dimensions taildrums 6KT 215A40KT 215B40KT 215A40 CR (RVS)KT 215B40 CR (RVS)
Cable exit 8Option 1Option 3Option 4
Bracket drawings 9AB 40AB 40 RVS
Contact us 10
| TM 215-40
Aimtech
ul. Sikorskiego 12A
05-082 Kwirynów
Tel: +48 22 24 35 830
Fax: +48 22 20 50 457
www.aimtech.pl
3
Product overview TM 215-40TYPE
TM 215.40Power
kWBeltspeed m/s at 50 HzBeltpull N
Min. L mmDesign
A
Min. L mmDesign
B
Full load curr.400 V - 50 Hz
I = ... A
Weightkg
L=500
2755,50
4,701100
3,901340
3,501495
2,801865
2,502090
500 550 11 67275 ZV 2,002610
1,703075
1,503485
1,403730
1,304020
1,104750
255
4,00
4,70810
3.90975
3,501085
2,801355
2,501520
500 550 8,0 64255 Z 2,0019001,702235
255 ZV 1,5025351,402715
1,302925
1,103455
1,003800
0,904220
4403,00
2,90985
2,401190
2,001425
1,801585
1,402035
1,252280
500 550 6,6 64440 ZV 1,002850
0,853355
0,753800
0,704070
0,654385
4302,20
2,90720
2,40870
2,10995
1,701230
1,401495
1,251670
1,002090
0,902320
425 500 4,7 61430 ZV 0,852460
0,702985
0,653215
0,603485
0,553800
0,504180
0,454645
4201,50
2,90490
2,40595
2,10680
1,70840
1,401020
1,251140
1,001425
0,901585
0,801780
0,702035
425 500 3,6 59420 ZV 0,602375
0,552590
0,502850
0,453165
0,403565
6201,50
1,60890
0,851675
500 550 3,7 64620 ZV 0,363960
0,344190
0,314595
0,285090
415
1,10
2,90360
2,40435
2,10500
1,80580
1,40745
1,25835
1,001045
0,901160
0,801305
0,701495
425 500 2,9 57
0,601740
415 Z 0,5519000,502090
0,452320
415 ZV 0,402615
615 ZV 1,10 0,3629500,343075
0,313370
0,283730
0,264020 425 500 2,9 61
610
0,75
1,40510
1,20595
0,90790
0,85840
0,651095
0,601190
0,501425
0,451585
0,401780
425 500 2,5 59610 Z 0,3619800,342095
0,312300
610 ZV 0,2825450,262740
810 ZV 0,75 0,2331000,213395
0,193750 425 500 2,7 61
6750,55
1,40375
1,20435
0,90580
0,85615
0,65805
0,60870
0,501045
0,451160
0,401305
425 500 1,9 57675 Z 0,361450
0,341535
0,311635
0,281865
0,262010
875 Z0,55
0,232270
425 500 2,2 59875 ZV 0,212490
0,192750
1275 ZV 0,55 0,1730750,153485
0,124355 500 550 2,6 64
8050,37
1,10320
0,85415
0,70500
0,65540
0,50705
0,45780
0,40880
0,351005
0,301170
425 500 1,8 57805 Z 0,281255
0,251405
0,231530
0,211675
0,191850
1205
0,37
0,55640
425 500 2,0 611205 Z 0,1720700,152345
1205 ZV 0,122930
Available standard facewidth’s: 425 - 450 - 500 - 550 - 600 - 650 - 700 - 750 - 800 - 850 - 900 - 950 - 1000 mmOther beltspeeds and facewidth’s upon request.Two speed drummotors upon request.Other powers and frequencies upon request.When an electro-mechanical brake is fitted, the minimum facewidth is increased by 100 mm. The total weight of a drummotor grows approx. 4,5 kg. per 100 mm.Available torque: (Beltpull N x Drumdiameter m)/2 NmWe reserve the right to technical specification changes. TM 215-40 |
4
Dimensions drummotors
TM 215A40
TM 215B40
TM 215A40, mildsteel drummotor with cast iron junction box
TM 215B40, mildsteel drummotor with cast iron junction box
Width : 95
Width : 95
| TM 215-40
5
TM 215A40 CR (RVS)
TM 215B40 CR (RVS)
TM 215A40 CR, stainless steel drummotor with polyamide junction box and CR sealing
TM 215B40 CR, stainless steel drummotor with polyamide junction box and CR sealing
Width : 95
Width : 95
TM 215-40 |
6
Dimensions taildrums
KT 215A40
KT 215B40
KT 215A40, mildsteel taildrum
KT 215B40, mildsteel taildrum
| TM 215-40
7
KT 215A40 CR (RVS)
KT 215B40 CR (RVS)
KT 215A40 CR, stainless steel taildrum with CR sealing
KT 215B40 CR, stainless steel taildrum with CR sealing
TM 215-40 |
8
Cable exit
Option 1
Option 3
Option 4
Elbow cable exit with cable gland (minimum drumlength increases with at least 50 mm)
Open cable exit (minimum drumlength increases with at least 50 mm)
Straight cable exit with cable gland
Standard execution of a TM 215-40 is with a cast iron terminal box. For stainless steel execution, this can be either a polyamide or stainless steel terminal box.
On request a drummotor can be fitted with a cable. In this case it is important to know the available voltage (preferably 1 voltage), the length of the cable, wether the cable is shielded or not and the type of cable exit.
An overview of available cable exits is shown below.
Down Up
Right Left
| TM 215-40
9
Bracket drawings
AB 40
AB 40 RVS
AB 40, cast iron or steel bracket
AB 40 RVS, stainless steel bracket
TM 215-40 |
Van der GraafPower Transmission Equipment
Contact us
Aimtechul. Sikorskiego 12A05-082 Kwirynów
Tel: +48 22 24 35 830Fax: +48 22 20 50 457E-mail: [email protected]
Polska
