Product information
Drummotors
TM 315-50
w w w . v a n d e r g r a a f p t e . n l
Van der GraafPower Transmission Equipment
2
This catalogue contains standard designs of the TM 315-50. This drummotor can be provided in steel or (partly) stainless steel (304 or 316). Stainless steel executions have different dimensions then steel executions.
For different lengths or executions please contact us or your local distributor.
We reserve the right to change technical specifications.
Van der Graaf B.V.De Weijert 148325 EM VollenhoveThe Netherlands
P.O. box 38325 ZG VollenhoveThe Netherlands
Tel: +31 (0) 527 241 441Fax: +31 (0) 527 241 488
TM 315-50
Introduction
Address details
© 04/2009 Van der Graaf B.V.
IndexTM 315-50 2
IntroductionAddress details
Product overview TM 315-50 3Dimensions drummotors 4
TM 315A50TM 315B50TM 315A50 CR (RVS)TM 315B50 CR (RVS)
Dimensions taildrums 6KT 315A50KT 315B50KT 315A50 CR (RVS)KT 315B50 CR (RVS)
Cable exit 8Option 1Option 3
Bracket drawings 9AB 50
Contact us 10
| TM 315-50
3
Product overview TM 315-50TYPE
TM 315.50Power
kWBeltspeed m/s at 50 HzBeltpull N
Min. L mmDesign
A
Min. L mmDesign
B
Full load curr.400 V - 50 Hz
I = ... A
Weightkg
L=600
215
11
4,402375
3,802750
3,403075
3,003485
600(650)
650(700) 19,7 140215 Z 2,80
37302,504180
2,404355
2,204750
215 ZV 1,905500
1,606530
4107,5
4,101740
3,402095
3,002375
2,402970
2,203240
1,903750
1,704190
1,504750
600 650 15 140410 ZV 1,40
50901,255700
1,205940
1,106475
475
5,5
4,101275
3,401535
3,001740
2,402175
2,202375
1,902750
1,703075
1,503485
550 600 10,5 135475 Z 1,403730
1,254180
1,204355
1,104750
475 ZV 0,955500
0,806530
455
4,0
4,10925
3,401120
3,001265
2,401585
2,301650
1,902000
1,702235
1,502535
1,402715
1,203165
500 550 7,8 130
1,103455
0,904220
455 Z 0,804750
455 ZV 0,705430
0,655845
0,606335
0,556910
440
3,0
2,301240
1,901500
1,701675
1,501900
1,402035
1,202375
1,102590
0,903165
0,803565
500 550 6,6 130440 Z 0,704070
0,604750
440 ZV 0,555180
0,505700
640 3,0 2,701055
1,601780 500 550 7,1 130
640 ZV 0,456335
0,407125
630
2,2
1,501395
1,201740
1,101900
0,902320
0,802615
0,702985
0,603485
0,504180
500 550 4,9 130630 Z 0,454645
630 ZV 0,405225
0,385500
0,346145
820
1,5
1,101295
0,901585
0,851675
0,652190
0,602375
0,552590
0,453165
0,403565
500 550 4,6 130820 Z 0,373850
0,324455
0,294915
820 ZV 0,255700
12201,5
0,702035
0,354070
550 600 5,8 1351220 ZV 0,24
59400,216785
8151,1
1,10950
0,901160
0,851230
0,651610
0,601740
0,551900
0,452320
0,402615
500 550 3,3 130815 Z 0,37
28250,323265
0,293605
0,254180
1215
1,1
0,701495
0,352985
500 550 5,9 1301215 Z 0,244355
1215 ZV 0,195500
0,166530
Available standard facewidth’s: 500 - 550 - 600 - 650 - 700 - 750 - 800 - 850 - 900 - 950 - 1000 - 1050 - 1100 - 1150 mmOther beltspeeds and facewidth’s upon request.Two speed drummotors upon request.Other powers and frequencies upon request.When a 2-pole drummotor is fitted with a backstop, the minimum facewith is increased by 50 mm.When an electro-mechanical brake is fitted, the minimum facewidth is increased by 100 mm. The total weight of a drummotor grows approx. 7 kg. per 100 mm.Available torque: (Beltpull N x Drumdiameter m)/2 NmWe reserve the right to technical specification changes.
TM 315-50 |
4
Dimensions drummotors
TM 315A50
TM 315B50
TM 315A50, mildsteel drummotor with cast iron junction box
TM 315B50, mildsteel drummotor with cast iron junction box
Width : 95
Width : 95
| TM 315-50
5
TM 315A50 CR (RVS)
TM 315B50 CR (RVS)
TM 315A50 CR, stainless steel drummotor with polyamide junction box and CR sealing
TM 315B50 CR, stainless steel drummotor with polyamide junction box and CR sealing
Width : 95
Width : 95
TM 315-50 |
6
Dimensions taildrums
KT 315A50
KT 315B50
KT 315A50, mildsteel taildrum
KT 315B50, mildsteel taildrum
| TM 315-50
7
KT 315A50 CR (RVS)
KT 315B50 CR (RVS)
KT 315A50 CR, stainless steel taildrum with CR sealing
KT 315B50 CR, stainless steel taildrum with CR sealing
TM 315-50 |
8
Cable exit
Option 1
Option 3Elbow cable exit with cable gland (minimum drumlength increases with at least 50 mm)
Straight cable exit with cable gland
Standard execution of a TM 315-50 is with a cast iron terminal box. For stainless steel execution, this can be either a polyamide or stainless steel terminal box.
On request a drummotor can be fitted with a cable. In this case it is important to know the available voltage (preferably 1 voltage), the length of the cable, wether the cable is shielded or not and the type of cable exit.
An overview of available cable exits is shown below.
| TM 315-50
Van der GraafPower Transmission Equipment
Netherlands Canada Great BrittainVan der Graaf B.V. Van der Graaf Inc. Van der Graaf U.K. Ltd.
De Weijert 14 2 Van der Graaf Court Unit 23, The Metro Centre
Postbus 3 Brampton Welbeck Way Woodston
8325 ZG Vollenhove Ontario L6T 5R6 Peterborough PE2 7UH
Tel: 00 31 527 241441 Tel: 00 1 905 793 8100 Tel: 00 31 527 241441
Fax: 00 31 527 241488 Fax: 00 1 905 793 8129 Fax: 00 31 527 241488
E-mail: [email protected] E-mail: [email protected] E-mail: [email protected]
www.vandergraafpte.nl www.vandergraaf.com www.vandergraafpte.biz
USA Germany SwedenVan der Graaf Corp. Van der Graaf GmbH Van der Graaf Scandinavia AB
1481 Trae Lane Rheiner Straße 24 B Spinngatan 2
Lithia Springs GA 48432 Rheine-Mesum 260 50 Billesholm
30122 Atlanta Tel: 00 49 5975 306210 Tel: 00 46 42 22 0802
Tel: 00 1 770 819 6573 Fax: 00 49 5975 3062120 Fax: 00 46 42 22 0803
00 1 770 819 6566 E-mail: [email protected] E-mail: [email protected]
Fax: 00 1 770 819 6675 www.vandergraaf.de www.vandergraaf.se
Contact us