Opto DevicesProduct Information
LED
1606S②-2000S②
Head Of�ceMarunouchi Kitaguchi Bldg.1-6-5 Marunouchi Chiyoda-ku, Tokyo 100-8150 JAPANTEL: +81 3-5657-1040FAX: +81 3-5657-1044
Sales Division LDMarunouchi Kitaguchi Bldg.1-6-5 Marunouchi Chiyoda-ku, Tokyo 100-8150 JAPANTEL: +81 3-5657-1040FAX: +81 3-5657-1044
Sales Division LED66-3, Minamikawabe-Cho, Higashi-Kujyou, Minami-Ku, Kyoto 601-8034TEL: +81 75-682-2338 FAX: +81 75-682-2267
USHIO HONG KONG LTD. /牛尾香港有限公司 Suites 3113-14, 31/F, Tower 6, The Gateway, 9 Canton Road, Tsim Sha Tsui, Kowloon, Hong KongTEL: +852 2756-7880FAX: +852 2798-9861
NECSEL INTELLECTUAL PROPERTY, INC. 801 Ames Avenue, Milpitas, CA 95035, U.S.A.TEL: +1 408-940-0751FAX: +1 408-404-0817
USHIO EUROPE B.V. Breguetlaan 16-18, 1438 BC Oude Meer, the NetherlandsTEL: +31 20-446-9333FAX: +31 20-446-0360
JAPAN
ASIA
AMERICA
EUROPE
For Inquiry
www.ushio-optosemi.com
Vers
ion:
170
3-B
-OD
-LE
D-E
N
USHIO EUROPE B.V. - Headquarter USHIO U.K., Ltd.
The Netherlands | Tel. +31 20 446 9333 United Kingdom | Tel. +44 1296 339988
[email protected] | www.ushio.eu [email protected] | www.ushio.eu
USHIO DEUTSCHLAND GmbH USHIO FRANCE S.A.R.L.
Germany | Tel. +49 8094 9054 0 France | Tel. +33 134 64 94 94
[email protected] | www.ushio.eu [email protected] | www.ushio.eu
1703-B-OD-LED-EN.indd 1-2 9-3-2017 10:04:55
USHIO’s Goal
US
HIO
’s G
oa
l
USHIO’s Goal
Application
ONE STOP From the Beginning to the End
Japanese Quality
3
4
5
USHIO
Imaging
Automotive
Illumination
Sensing
Science, Medical, Bio
Industrial Process
USHIO Advantage Custom-Made Experience▶ Strong “Application supports”: Collaboration with customer from start of Product Development. ▶ Why Successful solution: USHIO method — successful with more than 50-year experiences in
Lighting Industries, Device and Optical technologies
USHIO Engineering Custom-Made Technologies▶ Chip Technologies: ❶Design, ❷Epitaxial Growth, ❸Device Process▶ Packaging Technologies: ❶Optics Design, ❷Thermal Management, ❸Electrical & Mechanical Design
ONE STOP SOLUTION with USHIO’s LED and LD
Custom-Made Solution
1
2
Optimization:USHIO will propose the best device to your application from both LED and LD. Taking best characteristics of LED and LD into consideration.
Product Choice:USHIO can offers to choose the best wavelength from a wider variety of products. Wavelength range from Violet, Visible, to IR for your application — ONE STOP source for your LED and LD.
Technology Advantage:USHIO can provide the best solution for the application with “Higher irradiance, Higher efficiency, Higher reliabilities”.
Option:USHIO can propose solution to meet your needs. 1. From available packaging to best meet your needs2. Customizing solution to match your Application. Multi wavelength, Optical Package are some of your option.
USHIO “Lighting Know-How”
will always delivery best
solution(s) to customer needs.
Know-How is 50 years of
our knowledge in illumination,
not only as light source,
Light and Energy.
USHIO provide “Made in Japan” products with high “Performance and Quality”, that are proven by experiences and technologies for more than 50 years.
USHIO has Business Model using our own Technologies and Manufacturing to provide from R&D, Design, and Production (Epitaxial to Package Process).USHIO is actively collaborating with Research Institutions and Universities to create new innovations.
Wafer & MaterialEpitaxial Wafer & Device Process
FinishedDevice
Chip & MaterialPackage Assembly
Finished Package
Front End - Device Back End - Packaging
Custom-Made Solution
Chip Design
Epitaxial Growth
Device Process
Thermal ManagementOptics Design Electrical & Mechanical Design
Experience CreationSolution Integration
Wavelength: UV 365nm ~ IR 1,650nmPower: High 1,400mW class ~ Low 1mW class
Wavelength: UV 400nm ~ IR 850nmPower: High 2,000mW class ~ Low 5mW
LED
LD
We are preparing two brochures for “Laser Diode” and for “LED”.
01 02
US
HIO
’s G
oa
l
1703-B-OD-LED-EN.indd 1-2 9-3-2017 10:05:00
USHIO’s Goal
US
HIO
’s G
oa
l
USHIO’s Goal
Application
ONE STOP From the Beginning to the End
Japanese Quality
3
4
5
USHIO
Imaging
Automotive
Illumination
Sensing
Science, Medical, Bio
Industrial Process
USHIO Advantage Custom-Made Experience▶ Strong “Application supports”: Collaboration with customer from start of Product Development. ▶ Why Successful solution: USHIO method — successful with more than 50-year experiences in
Lighting Industries, Device and Optical technologies
USHIO Engineering Custom-Made Technologies▶ Chip Technologies: ❶Design, ❷Epitaxial Growth, ❸Device Process▶ Packaging Technologies: ❶Optics Design, ❷Thermal Management, ❸Electrical & Mechanical Design
ONE STOP SOLUTION with USHIO’s LED and LD
Custom-Made Solution
1
2
Optimization:USHIO will propose the best device to your application from both LED and LD. Taking best characteristics of LED and LD into consideration.
Product Choice:USHIO can offers to choose the best wavelength from a wider variety of products. Wavelength range from Violet, Visible, to IR for your application — ONE STOP source for your LED and LD.
Technology Advantage:USHIO can provide the best solution for the application with “Higher irradiance, Higher efficiency, Higher reliabilities”.
Option:USHIO can propose solution to meet your needs. 1. From available packaging to best meet your needs2. Customizing solution to match your Application. Multi wavelength, Optical Package are some of your option.
USHIO “Lighting Know-How”
will always delivery best
solution(s) to customer needs.
Know-How is 50 years of
our knowledge in illumination,
not only as light source,
Light and Energy.
USHIO provide “Made in Japan” products with high “Performance and Quality”, that are proven by experiences and technologies for more than 50 years.
USHIO has Business Model using our own Technologies and Manufacturing to provide from R&D, Design, and Production (Epitaxial to Package Process).USHIO is actively collaborating with Research Institutions and Universities to create new innovations.
Wafer & MaterialEpitaxial Wafer & Device Process
FinishedDevice
Chip & MaterialPackage Assembly
Finished Package
Front End - Device Back End - Packaging
Custom-Made Solution
Chip Design
Epitaxial Growth
Device Process
Thermal ManagementOptics Design Electrical & Mechanical Design
Experience CreationSolution Integration
Wavelength: UV 365nm ~ IR 1,650nmPower: High 1,400mW class ~ Low 1mW class
Wavelength: UV 400nm ~ IR 850nmPower: High 2,000mW class ~ Low 5mW
LED
LD
We are preparing two brochures for “Laser Diode” and for “LED”.
01 02U
SH
IO’s
Go
al
1703-B-OD-LED-EN.indd 1-2 9-3-2017 10:05:00
Tota
l Rad
iate
d P
ower
[mW
]
Peak Wavelength [nm]
300 400 500 600 700 800 900 1000 1100 1200 1300 1400 1500 1600 1700
Visible
UV
NIR
Molded Type and SMT
IR
1400
1200
1000
800
600
400
200
0
Product MapProduct MapAll wavelengths between 365nm and 1,650nm can be offered.
Series Series
Covering all wavelengths in the UV (ultraviolet), visible and IR (infrared) spectra, between 365 nm to 1,650 nm.- Models supporting all output ranges from low power to
high power- Wide-ranging packages to choose from to best suit
your optical designWe can also propose combination products in addition to LEDs and photo-sensors.
High output is achieved through the use of the unique domed-chip formation technology.And an excellent beam shape is provided by precision lens (package) design technology.Enable a suitable product selection as the light source for NC machine tools, robots, ophthalmoscopes and position detection equipment.
LEDs Photo sensors
FL Type
Multi Chips and Multi Wavelength LEDs
SG Type
Stem Type LEDs
P.05SMBB Family
P.05EDC Family
P.06SMT Family
P.07Molded Type
P.08SG Type FL Type
03 04
Pr
od
uc
t Ma
p
Pr
od
uc
t Ma
p
1703-B-OD-LED-EN.indd 3-4 9-3-2017 10:05:11
Tota
l Rad
iate
d P
ower
[mW
]
Peak Wavelength [nm]
300 400 500 600 700 800 900 1000 1100 1200 1300 1400 1500 1600 1700
Visible
UV
NIR
Molded Type and SMT
IR
1400
1200
1000
800
600
400
200
0
Product MapProduct MapAll wavelengths between 365nm and 1,650nm can be offered.
Series Series
Covering all wavelengths in the UV (ultraviolet), visible and IR (infrared) spectra, between 365 nm to 1,650 nm.- Models supporting all output ranges from low power to
high power- Wide-ranging packages to choose from to best suit
your optical designWe can also propose combination products in addition to LEDs and photo-sensors.
High output is achieved through the use of the unique domed-chip formation technology.And an excellent beam shape is provided by precision lens (package) design technology.Enable a suitable product selection as the light source for NC machine tools, robots, ophthalmoscopes and position detection equipment.
LEDs Photo sensors
FL Type
Multi Chips and Multi Wavelength LEDs
SG Type
Stem Type LEDs
P.05SMBB Family
P.05EDC Family
P.06SMT Family
P.07Molded Type
P.08SG Type FL Type
03 04
Pr
od
uc
t Ma
p
Pr
od
uc
t Ma
p
1703-B-OD-LED-EN.indd 3-4 9-3-2017 10:05:11
SMBB Family
EDC Family
High Power TOP LED
High Power TOP LED
Features
Features
Specifications
Specifications
▪ All wavelengths between 365nm and 1,650nm can be offered
▪ High power TOP LED using 1mm x 1mm chip
▪ Package of 5mm x 5mm equipped with copper heat sink
▪ Max. 3 pcs of 1mm x 1mm size chip can be mounted
▪ All wavelengths between 365nm and 1,650nm can be offered
▪ High power TOP LED using 1mm x 1mm chip
▪ Ceramic Package of 3.5mm x 3.5mm
▪ Viewing Half Angle: ±64 deg.▪ Total Radiated Power: 400mW▪ Radiant Intensity: 130mW/sr
▪ Viewing Half Angle: ±66 deg.▪ Total Radiated Power: 1200mW▪ Radiant Intensity: 400mW/sr
▪ Viewing Half Angle: ±22 deg.▪ Total Radiated Power: 400mW▪ Radiant Intensity: 440mW/sr
▪ Viewing Half Angle: ±9 deg.▪ Total Radiated Power: 400mW▪ Radiant Intensity: 1050mW/sr
▪ Viewing Half Angle: ±39 deg.▪ Total Radiated Power: 1200mW▪ Radiant Intensity: 1900mW/sr
▪ Viewing Half Angle: ±45 deg.▪ Total Radiated Power: 400mW▪ Radiant Intensity: 220mW/sr
Flat Type
Flat Type
03 Lens Type
02 Lens Type
S5 Lens Type
05 Lens Type
0 0.2 0.4 0.6 0.8 1-90
-80
-70-60
-50-40
-30-20 -10 0 10 20
3040
5060
70
80
90
0 0.2 0.4 0.6 0.8 1-90
-80
-70-60
-50-40
-30-20 -10 0 10 20
3040
5060
70
80
90
0 0.2 0.4 0.6 0.8 1-90
-80
-70-60
-50-40
-30-20 -10 0 10 20
3040
5060
70
80
90
0 0.2 0.4 0.6 0.8 1-90
-80
-70-60
-50-40
-30-20 -10 0 10 20
3040
5060
70
80
90
0 0.2 0.4 0.6 0.8 1-90
-80
-70-60
-50-40
-30-20 -10 0 10 20
3040
5060
70
80
90
0 0.2 0.4 0.6 0.8 1-90
-80
-70-60
-50-40
-30-20 -10 0 10 20
3040
5060
70
80
90
[ e.g. SMBB760D Series ]
[ e. g. EDC850DS Series ]
Series
Series
SMT Family
Surface Mount Type LED
Features
Specifications
▪ All wavelengths between 365nm and 1,650nm can be offered
▪ Package dimension: 3.5mm x 2.8mm
Flat Type S1 Lens Type
0 0.2 0.4 0.6 0.8 1-90
-80
-70-60
-50-40
-30-20 -10 0 10 20
3040
5060
70
80
900 0.2 0.4 0.6 0.8 1
-90
-80
-70-60
-50-40
-30-20 -10 0 10 20
3040
5060
70
80
90
[ e.g. SMT780 Series ]
▪ Viewing Half Angle: ±62 deg.▪ Total Radiated Power: 20mW▪ Radiant Intensity: 10mW/sr
▪ SMT with Silicone Lens▪ Viewing Half Angle: ±10 deg.▪ Total Radiated Power: 20mW▪ Radiant Intensity: 57mW/sr
SMT with Silicone Lens
SMT with Epoxy Lens (Allowable Wavelengths: between 470nm and 1,650nm)
▪ SMT with Epoxy Lens▪ Viewing Half Angle: ±16 deg.▪ Total Radiated Power: 20mW▪ Radiant Intensity: 40mW/sr
▪ SMT with Epoxy Lens▪ Viewing Half Angle: ±39 deg.▪ Total Radiated Power: 20mW▪ Radiant Intensity: 19mW/sr
▪ SMT with Epoxy Lens▪ Viewing Half Angle: ±20 deg.▪ Total Radiated Power: 20mW▪ Radiant Intensity: 26mW/sr
▪ Viewing Half Angle: ±45 deg.▪ Total Radiated Power: 20mW▪ Radiant Intensity: 13mW/sr
23 Lens Type
27 Lens Type
25 Lens Type
29 Lens Type
0 0.2 0.4 0.6 0.8 1-90
-80
-70-60
-50-40
-30-20 -10 0 10 20
3040
5060
70
80
90
0 0.2 0.4 0.6 0.8 1-90
-80
-70-60
-50-40
-30-20 -10 0 10 20
3040
5060
70
80
90
0 0.2 0.4 0.6 0.8 1-90
-80
-70-60
-50-40
-30-20 -10 0 10 20
3040
5060
70
80
90
0 0.2 0.4 0.6 0.8 1-90
-80
-70-60
-50-40
-30-20 -10 0 10 20
3040
5060
70
80
90
Series
05 06
SM
T F
am
ily
SM
BB
Fa
mily|
ED
C F
am
ily
1703-B-OD-LED-EN.indd 5-6 9-3-2017 10:05:23
SMBB Family
EDC Family
High Power TOP LED
High Power TOP LED
Features
Features
Specifications
Specifications
▪ All wavelengths between 365nm and 1,650nm can be offered
▪ High power TOP LED using 1mm x 1mm chip
▪ Package of 5mm x 5mm equipped with copper heat sink
▪ Max. 3 pcs of 1mm x 1mm size chip can be mounted
▪ All wavelengths between 365nm and 1,650nm can be offered
▪ High power TOP LED using 1mm x 1mm chip
▪ Ceramic Package of 3.5mm x 3.5mm
▪ Viewing Half Angle: ±64 deg.▪ Total Radiated Power: 400mW▪ Radiant Intensity: 130mW/sr
▪ Viewing Half Angle: ±66 deg.▪ Total Radiated Power: 1200mW▪ Radiant Intensity: 400mW/sr
▪ Viewing Half Angle: ±22 deg.▪ Total Radiated Power: 400mW▪ Radiant Intensity: 440mW/sr
▪ Viewing Half Angle: ±9 deg.▪ Total Radiated Power: 400mW▪ Radiant Intensity: 1050mW/sr
▪ Viewing Half Angle: ±39 deg.▪ Total Radiated Power: 1200mW▪ Radiant Intensity: 1900mW/sr
▪ Viewing Half Angle: ±45 deg.▪ Total Radiated Power: 400mW▪ Radiant Intensity: 220mW/sr
Flat Type
Flat Type
03 Lens Type
02 Lens Type
S5 Lens Type
05 Lens Type
0 0.2 0.4 0.6 0.8 1-90
-80
-70-60
-50-40
-30-20 -10 0 10 20
3040
5060
70
80
90
0 0.2 0.4 0.6 0.8 1-90
-80
-70-60
-50-40
-30-20 -10 0 10 20
3040
5060
70
80
90
0 0.2 0.4 0.6 0.8 1-90
-80
-70-60
-50-40
-30-20 -10 0 10 20
3040
5060
70
80
90
0 0.2 0.4 0.6 0.8 1-90
-80
-70-60
-50-40
-30-20 -10 0 10 20
3040
5060
70
80
90
0 0.2 0.4 0.6 0.8 1-90
-80
-70-60
-50-40
-30-20 -10 0 10 20
3040
5060
70
80
90
0 0.2 0.4 0.6 0.8 1-90
-80
-70-60
-50-40
-30-20 -10 0 10 20
3040
5060
70
80
90
[ e.g. SMBB760D Series ]
[ e. g. EDC850DS Series ]
Series
Series
SMT Family
Surface Mount Type LED
Features
Specifications
▪ All wavelengths between 365nm and 1,650nm can be offered
▪ Package dimension: 3.5mm x 2.8mm
Flat Type S1 Lens Type
0 0.2 0.4 0.6 0.8 1-90
-80
-70-60
-50-40
-30-20 -10 0 10 20
3040
5060
70
80
900 0.2 0.4 0.6 0.8 1
-90
-80
-70-60
-50-40
-30-20 -10 0 10 20
3040
5060
70
80
90
[ e.g. SMT780 Series ]
▪ Viewing Half Angle: ±62 deg.▪ Total Radiated Power: 20mW▪ Radiant Intensity: 10mW/sr
▪ SMT with Silicone Lens▪ Viewing Half Angle: ±10 deg.▪ Total Radiated Power: 20mW▪ Radiant Intensity: 57mW/sr
SMT with Silicone Lens
SMT with Epoxy Lens (Allowable Wavelengths: between 470nm and 1,650nm)
▪ SMT with Epoxy Lens▪ Viewing Half Angle: ±16 deg.▪ Total Radiated Power: 20mW▪ Radiant Intensity: 40mW/sr
▪ SMT with Epoxy Lens▪ Viewing Half Angle: ±39 deg.▪ Total Radiated Power: 20mW▪ Radiant Intensity: 19mW/sr
▪ SMT with Epoxy Lens▪ Viewing Half Angle: ±20 deg.▪ Total Radiated Power: 20mW▪ Radiant Intensity: 26mW/sr
▪ Viewing Half Angle: ±45 deg.▪ Total Radiated Power: 20mW▪ Radiant Intensity: 13mW/sr
23 Lens Type
27 Lens Type
25 Lens Type
29 Lens Type
0 0.2 0.4 0.6 0.8 1-90
-80
-70-60
-50-40
-30-20 -10 0 10 20
3040
5060
70
80
90
0 0.2 0.4 0.6 0.8 1-90
-80
-70-60
-50-40
-30-20 -10 0 10 20
3040
5060
70
80
90
0 0.2 0.4 0.6 0.8 1-90
-80
-70-60
-50-40
-30-20 -10 0 10 20
3040
5060
70
80
90
0 0.2 0.4 0.6 0.8 1-90
-80
-70-60
-50-40
-30-20 -10 0 10 20
3040
5060
70
80
90
Series
05 06S
MT
Fa
mily
SM
BB
Fa
mily|
ED
C F
am
ily
1703-B-OD-LED-EN.indd 5-6 9-3-2017 10:05:23
Series
Molded TypeFeatures
▪ Plastic Molded Type LED
Specifications [ e. g. L750-AU Series ]
▪ 5 Plastic Molded LED▪ Viewing Half Angle: ±10 deg.▪ Total Radiated Power: 23mW▪ Radiant Intensity: 90mW/sr
▪ 5 Plastic Molded LED▪ Viewing Half Angle: ±10 deg.▪ Total Radiated Power: 23mW▪ Radiant Intensity: 90mW/sr
▪ 5 Plastic Molded LED▪ Viewing Half Angle: ±44 deg.▪ Total Radiated Power: 23mW▪ Radiant Intensity: 12mW/sr
▪ 5 Plastic Molded LED▪ Viewing Half Angle: ±8 deg.▪ Total Radiated Power: 23mW▪ Radiant Intensity: 120mW/sr
▪ 5 Plastic Molded LED▪ Viewing Half Angle: ±17 deg.▪ Total Radiated Power: 23mW▪ Radiant Intensity: 46mW/sr
▪ 5 Plastic Molded LED▪ Viewing Half Angle: ±4 deg.▪ Total Radiated Power: 23mW▪ Radiant Intensity: 140mW/sr
01 Lens Type 03 Lens Type
05 Lens Type
02 Lens Type
04 Lens Type 06 Lens Type
0 0.2 0.4 0.6 0.8 1-90
-80
-70-60
-50-40
-30-20 -10 0 10 20
3040
5060
70
80
900 0.2 0.4 0.6 0.8 1
-90
-80
-70-60
-50-40
-30-20 -10 0 10 20
3040
5060
70
80
90
0 0.2 0.4 0.6 0.8 1-90
-80
-70-60
-50-40
-30-20 -10 0 10 20
3040
5060
70
80
90
0 0.2 0.4 0.6 0.8 1-90
-80
-70-60
-50-40
-30-20 -10 0 10 20
3040
5060
70
80
90
0 0.2 0.4 0.6 0.8 1-90
-80
-70-60
-50-40
-30-20 -10 0 10 20
3040
5060
70
80
900 0.2 0.4 0.6 0.8 1
-90
-80
-70-60
-50-40
-30-20 -10 0 10 20
3040
5060
70
80
90
▪ 5 Plastic Molded LED▪ Viewing Half Angle: Short: ±10 deg. Long: ±21 deg.▪ Total Radiated Power: 23mW▪ Radiant Intensity: 75mW/sr
09 Lens Type
0 0.2 0.4 0.6 0.8 1-90
-80
-70-60
-50-40
-30-20 -10 0 10 20
3040
5060
70
80
90
Short
0 0.2 0.4 0.6 0.8 1-90
-80
-70-60
-50-40
-30-20 -10 0 10 20
3040
5060
70
80
90
Long
▪ 3 Plastic Molded LED▪ Viewing Half Angle: ±17 deg.▪ Total Radiated Power: 23mW▪ Radiant Intensity: 66mW/sr
33 Lens Type
0 0.2 0.4 0.6 0.8 1-90
-80
-70-60
-50-40
-30-20 -10 0 10 20
3040
5060
70
80
90
▪ 3 Plastic Molded LED▪ Viewing Half Angle: ±32 deg.▪ Total Radiated Power: 23mW▪ Radiant Intensity: 20mW/sr
36 Lens Type
0 0.2 0.4 0.6 0.8 1-90
-80
-70-60
-50-40
-30-20 -10 0 10 20
3040
5060
70
80
90
Series
Other Products
CMA Transfer Moldings
TO-66 LED Illuminators
Stem Type LEDs Ultra High Power LED Array
Multi Chips and Multi Wavelength LEDs
[Infrared Light Emitting Diodes]
Features
▪ Achieve high optical power by unique domed-chip formation technology.
▪ 2 wavelength bands line up of 820nm/870nm
▪ Set up SG-type of wide radiation beam and FL-type of collimated beam
IRED’s Product Lineup
SG Type
FL Type
General
Encorder
820nm
880nm 10mW
0.5mW*
HE8807SG
HE8807FL
40mW HE8404SG CAN type(SG)
CAN type(SG)
CAN type(FL)
20mW HE8811 CAN type(SG)
40mW HE8812SG CAN type(SG)870nm
PackageTypeProductsOptical
outputWavelengthApplication
* : The optical output within 9 degrees of the acceptance angle.
* : The optical output within 9 degrees of the acceptance angle.
IRED’s Main Characteristics
Part No.
Absolute Maximum Rating Optical and Electrical Characterristics
TestConditionsForward
current(mA)
Operatingtemperature
(℃)
Optical outputpower (mW)
Peak wavelength(nm)
Spectral width(nm)
Forward voltage(V)
min. typ. max. min. typ. max. min. typ. max. min. typ. max.
HE8811 200 -20 to 60 20 30 - 780 820 900 - 50 60 - 2.0 2.5 IF=150mA
HE8404SG 250 -20 to 60 40 50 - 790 820 850 - 50 60 - 1.9 2.5 IF=200mA
HE8812SG 250 -20 to 60 40 50 - 840 870 900 - 50 60 - 1.8 2.5 IF=200mA
HE8807SG 200 -20 to 85 10 15 - 800 880 900 - 30 60 - 1.7 2.3 IF=150mA
HE8807FL 200 -20 to 85 0.5* 1.0* - 800 880 900 - 30 60 - 1.7 2.3 IF=150mA
Series
07 08
Mo
lde
d T
yp
e
Ot
he
r P
ro
du
ct
s|IR
ED
Se
rie
s
1703-B-OD-LED-EN.indd 7-8 9-3-2017 10:05:40
Series
Molded TypeFeatures
▪ Plastic Molded Type LED
Specifications [ e. g. L750-AU Series ]
▪ 5 Plastic Molded LED▪ Viewing Half Angle: ±10 deg.▪ Total Radiated Power: 23mW▪ Radiant Intensity: 90mW/sr
▪ 5 Plastic Molded LED▪ Viewing Half Angle: ±10 deg.▪ Total Radiated Power: 23mW▪ Radiant Intensity: 90mW/sr
▪ 5 Plastic Molded LED▪ Viewing Half Angle: ±44 deg.▪ Total Radiated Power: 23mW▪ Radiant Intensity: 12mW/sr
▪ 5 Plastic Molded LED▪ Viewing Half Angle: ±8 deg.▪ Total Radiated Power: 23mW▪ Radiant Intensity: 120mW/sr
▪ 5 Plastic Molded LED▪ Viewing Half Angle: ±17 deg.▪ Total Radiated Power: 23mW▪ Radiant Intensity: 46mW/sr
▪ 5 Plastic Molded LED▪ Viewing Half Angle: ±4 deg.▪ Total Radiated Power: 23mW▪ Radiant Intensity: 140mW/sr
01 Lens Type 03 Lens Type
05 Lens Type
02 Lens Type
04 Lens Type 06 Lens Type
0 0.2 0.4 0.6 0.8 1-90
-80
-70-60
-50-40
-30-20 -10 0 10 20
3040
5060
70
80
900 0.2 0.4 0.6 0.8 1
-90
-80
-70-60
-50-40
-30-20 -10 0 10 20
3040
5060
70
80
90
0 0.2 0.4 0.6 0.8 1-90
-80
-70-60
-50-40
-30-20 -10 0 10 20
3040
5060
70
80
90
0 0.2 0.4 0.6 0.8 1-90
-80
-70-60
-50-40
-30-20 -10 0 10 20
3040
5060
70
80
90
0 0.2 0.4 0.6 0.8 1-90
-80
-70-60
-50-40
-30-20 -10 0 10 20
3040
5060
70
80
900 0.2 0.4 0.6 0.8 1
-90
-80
-70-60
-50-40
-30-20 -10 0 10 20
3040
5060
70
80
90
▪ 5 Plastic Molded LED▪ Viewing Half Angle: Short: ±10 deg. Long: ±21 deg.▪ Total Radiated Power: 23mW▪ Radiant Intensity: 75mW/sr
09 Lens Type
0 0.2 0.4 0.6 0.8 1-90
-80
-70-60
-50-40
-30-20 -10 0 10 20
3040
5060
70
80
90
Short
0 0.2 0.4 0.6 0.8 1-90
-80
-70-60
-50-40
-30-20 -10 0 10 20
3040
5060
70
80
90
Long
▪ 3 Plastic Molded LED▪ Viewing Half Angle: ±17 deg.▪ Total Radiated Power: 23mW▪ Radiant Intensity: 66mW/sr
33 Lens Type
0 0.2 0.4 0.6 0.8 1-90
-80
-70-60
-50-40
-30-20 -10 0 10 20
3040
5060
70
80
90
▪ 3 Plastic Molded LED▪ Viewing Half Angle: ±32 deg.▪ Total Radiated Power: 23mW▪ Radiant Intensity: 20mW/sr
36 Lens Type
0 0.2 0.4 0.6 0.8 1-90
-80
-70-60
-50-40
-30-20 -10 0 10 20
3040
5060
70
80
90
Series
Other Products
CMA Transfer Moldings
TO-66 LED Illuminators
Stem Type LEDs Ultra High Power LED Array
Multi Chips and Multi Wavelength LEDs
[Infrared Light Emitting Diodes]
Features
▪ Achieve high optical power by unique domed-chip formation technology.
▪ 2 wavelength bands line up of 820nm/870nm
▪ Set up SG-type of wide radiation beam and FL-type of collimated beam
IRED’s Product Lineup
SG Type
FL Type
General
Encorder
820nm
880nm 10mW
0.5mW*
HE8807SG
HE8807FL
40mW HE8404SG CAN type(SG)
CAN type(SG)
CAN type(FL)
20mW HE8811 CAN type(SG)
40mW HE8812SG CAN type(SG)870nm
PackageTypeProductsOptical
outputWavelengthApplication
* : The optical output within 9 degrees of the acceptance angle.
* : The optical output within 9 degrees of the acceptance angle.
IRED’s Main Characteristics
Part No.
Absolute Maximum Rating Optical and Electrical Characterristics
TestConditionsForward
current(mA)
Operatingtemperature
(℃)
Optical outputpower (mW)
Peak wavelength(nm)
Spectral width(nm)
Forward voltage(V)
min. typ. max. min. typ. max. min. typ. max. min. typ. max.
HE8811 200 -20 to 60 20 30 - 780 820 900 - 50 60 - 2.0 2.5 IF=150mA
HE8404SG 250 -20 to 60 40 50 - 790 820 850 - 50 60 - 1.9 2.5 IF=200mA
HE8812SG 250 -20 to 60 40 50 - 840 870 900 - 50 60 - 1.8 2.5 IF=200mA
HE8807SG 200 -20 to 85 10 15 - 800 880 900 - 30 60 - 1.7 2.3 IF=150mA
HE8807FL 200 -20 to 85 0.5* 1.0* - 800 880 900 - 30 60 - 1.7 2.3 IF=150mA
Series
07 08
Mo
lde
d T
yp
e
Ot
he
r P
ro
du
ct
s|IR
ED
Se
rie
s
1703-B-OD-LED-EN.indd 7-8 9-3-2017 10:05:40
Sales for EuropeUSHIO Europe B.V.
Sales for North AmericaNecsel Intellectual Property, Inc.
Sales for China and AsiaUSHIO Hong Kong Ltd.
Head of�ce and LD Sales for JapanTokyo
R&D, Production, LED SalesKyoto
R&D, ProductionGotemba, Shizuoka
ProductionSaku, Nagano
We deliver our products developed and produced
in JAPAN through Global Sales Networks.
Global Net Work
09 10
Glo
ba
l Ne
t Wo
rk
Glo
ba
l Ne
t Wo
rk
1703-B-OD-LED-EN.indd 9-10 9-3-2017 10:05:47
Sales for EuropeUSHIO Europe B.V.
Sales for North AmericaNecsel Intellectual Property, Inc.
Sales for China and AsiaUSHIO Hong Kong Ltd.
Head of�ce and LD Sales for JapanTokyo
R&D, Production, LED SalesKyoto
R&D, ProductionGotemba, Shizuoka
ProductionSaku, Nagano
We deliver our products developed and produced
in JAPAN through Global Sales Networks.
Global Net Work
09 10
Glo
ba
l Ne
t Wo
rk
Glo
ba
l Ne
t Wo
rk
1703-B-OD-LED-EN.indd 9-10 9-3-2017 10:05:47
Opto DevicesProduct Information
LED
1606S②-2000S②
Head Of�ceMarunouchi Kitaguchi Bldg.1-6-5 Marunouchi Chiyoda-ku, Tokyo 100-8150 JAPANTEL: +81 3-5657-1040FAX: +81 3-5657-1044
Sales Division LDMarunouchi Kitaguchi Bldg.1-6-5 Marunouchi Chiyoda-ku, Tokyo 100-8150 JAPANTEL: +81 3-5657-1040FAX: +81 3-5657-1044
Sales Division LED66-3, Minamikawabe-Cho, Higashi-Kujyou, Minami-Ku, Kyoto 601-8034TEL: +81 75-682-2338 FAX: +81 75-682-2267
USHIO HONG KONG LTD. /牛尾香港有限公司 Suites 3113-14, 31/F, Tower 6, The Gateway, 9 Canton Road, Tsim Sha Tsui, Kowloon, Hong KongTEL: +852 2756-7880FAX: +852 2798-9861
NECSEL INTELLECTUAL PROPERTY, INC. 801 Ames Avenue, Milpitas, CA 95035, U.S.A.TEL: +1 408-940-0751FAX: +1 408-404-0817
USHIO EUROPE B.V. Breguetlaan 16-18, 1438 BC Oude Meer, the NetherlandsTEL: +31 20-446-9333FAX: +31 20-446-0360
JAPAN
ASIA
AMERICA
EUROPE
For Inquiry
www.ushio-optosemi.com
Vers
ion:
170
3-B
-OD
-LE
D-E
N
USHIO EUROPE B.V. - Headquarter USHIO U.K., Ltd.
The Netherlands | Tel. +31 20 446 9333 United Kingdom | Tel. +44 1296 339988
[email protected] | www.ushio.eu [email protected] | www.ushio.eu
USHIO DEUTSCHLAND GmbH USHIO FRANCE S.A.R.L.
Germany | Tel. +49 8094 9054 0 France | Tel. +33 134 64 94 94
[email protected] | www.ushio.eu [email protected] | www.ushio.eu
1703-B-OD-LED-EN.indd 1-2 9-3-2017 10:04:55