PRODUCT INFORMATION SHEET
Mobile Self-Contained Emergency Safety Shower
STD-40KSTD-H-40K, STD-J-40K
Mobile Self-Contained Emergency Safety Shower
Hughes Safety Showers manufacture a Mobile Self-Contained Emergency Safety Shower which has a capacity of approximately 114 litres and gives a constant flow of water for about 11/2 minutes.
The specially designed plastic lined cylinder is constantly charged with pressure and only requires the connection of a hose from a water main to fill it ready for use. Its compact design enables it to be easily stored when not being used. By incorporating a stainless steel frame and large diameter pneumatic tyres this cylinder can easily be moved and manoeuvred by one man. Should it be necessary to move the unit long distances or over uneven surfaces an ‘A’ frame with towing hitch (optional) can be fitted which enables it to be towed by any vehicle fitted with a standard tow ball.
The wheel spacing can also be altered which allows the unit to go through standard door openings; this is particularly important when requiring its use indoors in a laboratory or acid store etc. (Shown with optional Eye/Facewash Fountain and Optiflex).
As above but trace tape heated and pre-insulated STD-H-40K.
Also available Pre-insulated but without heating STD-J-40K.
Specification
Suitable for temporary use and capable of delivering a deluge of water for over 11/2 minutes.
This unit is easily filled by connecting to a mains water supply via a 15 or 20 mm hose pipe, it is then easily manoeuvred to its required position, either by hand, or by fitting an ‘A’ frame (optional) and hooking up to a standard tow ball on a vehicle. The wheel centres can be adjusted to enable the unit to be taken through a standard door openingallowing it to be used in laboratories and workrooms etc.
The 114 litre mild steel cylinder is lined to avoid internal corrosion and the exterior is painted with acid resistant white enamel paint. Fitted with Pictogram ‘Emergency Shower’ signs to International Standard ISO 3864-1 and green and white safety stripes.
Note: This Mobile Emergency Safety Shower is designed as a quick response first-aid device for use where a plumbed-in unit is not available and must therefore be backed up by a method of further decontamination.
Pantone282
Pantone485
MOBILESELF-CONTAINEDEMERGENCYSAFETY SHOWER
• Mobile Emergency Safety Shower
• Can be easily moved to the immediate vicinity of a potential accident
• Can be easily moved and manoeuvred by one man
• Insulated and trace tape heated options available for frost protection
• Hughes ball valve included for greater reliability and longer life
• Only requires the connection of a hose from a water main to fill the specially designed plastic lined cylinder
• Choice of optional components
PRODUCT INFORMATION SHEET
Mobile Self-Contained Emergency Safety Shower
Standards
Pantone282
Pantone485
TE
CH
NIC
AL D
ETA
ILS
MATERIALS OF CONSTRUCTION
PIPEWORK & FITTINGS (K) 304 Stainless Steel (or 316) & ABS Plastic tubulars and fittingsPIPEWORK & FITTINGS (KS) 304 Stainless Steel (or 316)
OPERATING VALVES Hughes - 316 Stainless Steel
SHOWER SPRAY OUTLET Hughes - Shower Nozzle Moulded UPVC
STANDARD FINISH (40K) White Gloss Painted Tank (H-40K + J-40K) Polyethylene Jacket
SERVICES
WATER INLET 1/2” Coupling
DESIGN OPERATING PRESSURE 2.0 to 6 BAR G
TEST PRESSURE 10.3 BAR G
FLOW RATES Shower: 76 litres/minute minimum Eye/Facewash (Optional): 11.4 litres/minute minimum
ENVIRONMENTAL OPERATING TEMPERATURE
MINIMUM AMBIENT OPERATING TEMP 5º C (41º F) - 40K 35º C (95º F) - 40K 0º C (32º F) - J-40K -20º C (-4º F) - H-40K
MAXIMUM AMBIENT OPERATING TEMP 40º C (104º F) - J-40K & H-40K
ACTIVATION/OPERATION
SHOWER/BODY SPRAY OPERATION Hand Lever
WEIGHTS and DIMENSIONS
OVERALL DIMENSIONS 780(W) x 1170(D) x 1430mm(H)
WEIGHT (UNPACKED) 80Kg (No Options)
• ALLOCATE A LOCATION REFERENCE FOR EASE OF IDENTIFICATION
• ALL UNITS TO BE ACTIVATED WEEKLY - ANSI Z358.1 2009
• SAFETY SHOWER/EYE WASH MUST BE LOCATED WITHIN 10 SECONDS OR 15 METRES
OF A POTENTIAL HAZARD - ANSI Z358.1 2009
• THE UNIT MUST BE LOCATED ON THE SAME LEVEL AS THE HAZARD AND THE PATH OF
TRAVEL & LOCAL AREA SHOULD BE FREE FROM OBSTRUCTIONS - ANSI Z358.1 2009
• THE UNIT SHOULD BE WELL LIT AND IDENTIFIED WITH HIGHLY VISIBLE
SIGNAGE TO ISO 3864.1 - ANSI Z358.1 2009
• FLUSH FOR SUFFICIENT DURATION TO PURGE THE SUPPLY PIPE WITH FRESH WATER
• REPLACE WORN OR ILLEGIBLE SAFETY SIGNS AND STICKERS
• SIGN & DATE SERVICE TAG WHEN SERVICE COMPLETED
Mobile Self-Contained Emergency Safety Shower
STD-40KSTD-H-40K, STD-J-40K
Hughes Ball Valve
• Designed using the latest 3D modelling software• Specifically developed for Hughes Emergency Shower and Eye Wash equipment• Stainless steel construction to cope with the harshest atmospheres• Low operating torque designed for ease of operation• Tested and witnessed by independent test house specialist• Designed for rough service. All valves are easily removable for servicing and maintenance.
PRODUCT INFORMATION SHEET
Options
Pantone282
Pantone485
OP
TIO
NS
Shower Sign Optiflex 100 Eye/Facewash ‘A’ Frame Towing Hitch
Optio
nal F
ittin
gsSh
ower
Sig
nOp
tiflex
Eye/
Face
wash
STD
-45G
‘A’ F
ram
e To
wing
Hitc
h
STD-40K
STD-H-40K
STD-J-40K
• • • •• • • •• • • •
Mobile Self-Contained Emergency Safety Shower
STD-40KSTD-H-40K, STD-J-40K
PRODUCT INFORMATION SHEET
Pantone282
Pantone485
HUGHES SAFETY SHOWERS LTDWhitefield Road, Bredbury, Stockport, Cheshire, SK6 2SS England, UK.
T: +44 (0)161 430 6618E: [email protected] F: +44 (0)161 430 7928
www.hughes-safety-showers.co.ukRegistered No. 0939240. VAT Registration No. 918 5005 32. Hughes Safety Showers Ltd is a wholly ownedsubsidiary of the JD Hughes Group PLC.
Mobile Self-Contained Emergency Safety Shower
STD-40KSTD-H-40K, STD-J-40K
G.A. DRAWING
835
HAND LEVERFOR SHOWEROPERATION
FLEXIBLEHOSE
ISOLATIONVALVE
PRESSURE GUAGE
HEAVY DUTYPOLYETHYLENEOUTER JACKETWITH CFC FREE POLYURETHANE FOAM INSULATION
WATER INLETCONNECTION
600
1421
2390
REMOVABLE SHOWER ARMFOR TRANSPORTATION
SPRAY NOZZLE(60 ANGLE)
QUICK RELEASECOUPLING
EYEBATH/FACEWASHFOUNTAIN(OPTIONAL)
1/2 INCH QUICK RELEASEWATER INLET CONNECTION
'A' FRAMETOWING HITCH(OPTIONAL)
SHOWER ARMSTOWAGE CLIP
SCHRADERAIR VALVE
FACTORY SET AT 1 BAR
AERATEDDIFFUSERNOZZLES
FLOW REGULATING VALVE
EYE, FACEAND BODYSHOWER(OPTIONAL)
835
HAND LEVERFOR SHOWEROPERATION
FLEXIBLEHOSE
ISOLATIONVALVE
PRESSURE GUAGE
HEAVY DUTYPOLYETHYLENEOUTER JACKETWITH CFC FREE POLYURETHANE FOAM INSULATION
WATER INLETCONNECTION
600
1421
2390
REMOVABLE SHOWER ARMFOR TRANSPORTATION
SPRAY NOZZLE(60 ANGLE)
QUICK RELEASECOUPLING
EYEBATH/FACEWASHFOUNTAIN(OPTIONAL)
1/2 INCH QUICK RELEASEWATER INLET CONNECTION
'A' FRAMETOWING HITCH(OPTIONAL)
SHOWER ARMSTOWAGE CLIP
SCHRADERAIR VALVE
FACTORY SET AT 1 BAR
AERATEDDIFFUSERNOZZLES
FLOW REGULATING VALVE
EYE, FACEAND BODYSHOWER(OPTIONAL)
835
HAND LEVERFOR SHOWEROPERATION
FLEXIBLEHOSE
ISOLATIONVALVE
PRESSURE GUAGE
HEAVY DUTYPOLYETHYLENEOUTER JACKETWITH CFC FREE POLYURETHANE FOAM INSULATION
WATER INLETCONNECTION
600
1421
2390
REMOVABLE SHOWER ARMFOR TRANSPORTATION
SPRAY NOZZLE(60 ANGLE)
QUICK RELEASECOUPLING
EYEBATH/FACEWASHFOUNTAIN(OPTIONAL)
1/2 INCH QUICK RELEASEWATER INLET CONNECTION
'A' FRAMETOWING HITCH(OPTIONAL)
SHOWER ARMSTOWAGE CLIP
SCHRADERAIR VALVE
FACTORY SET AT 1 BAR
AERATEDDIFFUSERNOZZLES
FLOW REGULATING VALVE
EYE, FACEAND BODYSHOWER(OPTIONAL)
835
HAND LEVERFOR SHOWEROPERATION
FLEXIBLEHOSE
ISOLATIONVALVE
PRESSURE GUAGE
HEAVY DUTYPOLYETHYLENEOUTER JACKETWITH CFC FREE POLYURETHANE FOAM INSULATION
WATER INLETCONNECTION
600
1421
2390
REMOVABLE SHOWER ARMFOR TRANSPORTATION
SPRAY NOZZLE(60 ANGLE)
QUICK RELEASECOUPLING
EYEBATH/FACEWASHFOUNTAIN(OPTIONAL)
1/2 INCH QUICK RELEASEWATER INLET CONNECTION
'A' FRAMETOWING HITCH(OPTIONAL)
SHOWER ARMSTOWAGE CLIP
SCHRADERAIR VALVE
FACTORY SET AT 1 BAR
AERATEDDIFFUSERNOZZLES
FLOW REGULATING VALVE
EYE, FACEAND BODYSHOWER(OPTIONAL)