2
PRODUCTS & SERVICES For more information please visit www.atcoem.com or e-mail us at [email protected] Turnkey Gas Compression and Processing Facilities Engineering, procurement and construction of modular, portable compressor stations with gas processing for unconventional gas, including air emissions and noise control. Cogeneration Plant EPC Engineering, procurement and construction of gas fired cogeneration plants up to 50 MW, including the supply of ATCO Emission Management’s HRSGs, and air emissions and noise control. Higgott-Kane™ Exhaust Systems GT exhaust systems to meet the most stringent of noise regulations, high cyclic loading and severe thermal stresses for GT’s ranging in size from 1.5 MW to 290 MW. Intake Systems Custom-designed, complete GT intake systems including air filtration, anti-icing, noise control, ducting and support structures. Simple Cycle Catalyst Systems (Scr) GT exhaust CO and NOx reduction systems using a unique ammonia injection grid for more efficient exhaust gas/ammonia mixing, superior sealing of catalyst to frame and liners, fast- start ammonia injection system, and optional critical low frequency or octave band noise abatement. Bypass System With Diverter Damper GT exhaust stack with a fully actuated, ATCO-patented diverter damper providing fast-switching from combined to simple cycle, controlled ramp-up of the steam cycle and gas turbine operation during steam turbine trips. Heat Recovery Steam Generators Custom engineered, natural or forced circulation, horizontal or vertical gas flow designs available for gas turbines up to 100MW. Anti-Icing Systems GT inlet heating systems using recovered heat from the exhaust system with even distribution of the heated air over the face of the inlet filter, without loss of engine performance or efficiency. Acoustic Buildings Selecting from over 25 ATCO laboratory- tested acoustical assemblies, walls and/or roof are acoustically treated along with the HVAC system and all openings for guaranteed performance. Acoustic Barriers Industrial-grade metal noise barriers as free- standing single wall or two-to-four sided structures as an economical solution to reducing industrial noise. Custom Silencers Custom designed silencers for a variety of applications: blow down and emergency venting, engine exhaust and inlet silencers, cooling tower and air cooled condenser silencers, ventilation silencers, fin-fan cooler silencers and more. Acoustical Ventilation Systems Custom-designed ventilation systems keep noise inside while efficiently heating or cooling interior equipment with ATCO buildings and enclosures. Acoustical Equipment Enclosures Standard or customized acoustical enclosures with silenced ventilation to lower noise for purchase or lease, with options for removable panels, lighting, electrical, gas detection, fire suppression, and stairs/ladders/platforms. Temporary Acoustic Structures Custom designed and engineered for easy set up and take down on site. Acoustic options available. Weather resistant.
