PERFORMANCE CHEMICALS FOR LUBRICANT INDUSTRIESAND MACHINERY & METAL PROCESSING INDUSTRIES
1. Lubricating Oil Additives 2. Base Materials for Polyalkylene Glycol-Type Lubricants 3. Base Materials for Water-Soluble Quenchants 4. Base Materials for Hydraulic Fluids 5. Materials for Brake Fluids 6. Rust Inhibitors 7. Water-Soluble Cutting Fluids 8. Emulsifiers for Metal Working Oils 9. Base Materials for Metal Cleaners
IMPORTANT :Before handling these products, refer to the current Safety Data Sheet for recommendedprotective equipment, and detailed precautionary and hazards information.
SANYO CHEMICAL PRODUCT OUTLINE
Printed in Japan on April 13, 2017 C841708 KURO, TAI (1000)
PRODUCT LIST
For detailed information, please contact Tokyo Area Sales & Marketing Office of Sanyo Chemical Industries, Ltd.E-mail: [email protected] Fax: +81 - 3 - 3245 - 1697URL: https://www.sanyo-chemical.co.jp/eng Tel: +81 - 3 - 5200 - 3400Address: No.10 Chuo Bldg., 1 - 5 - 6 Nihonbashi - honcho, Chuo - ku, Tokyo 103 - 0023, Japan
This brochure has been prepared solely for information purposes. Sanyo Chemical Industries, Ltd. extends no warranties and makes no representations as to the accuracy or completeness of the information contained herein, and assumes no responsibility regarding the suitability of this information for any intended purposes or for any consequences of using this information. Any product information in this brochure is without obligation and commitment, and is subject to change at any time without prior notice. Consequently anyone acting on information contained in this brochure does so entirely at his/her own risk. In particular, final determination of suitability of any material described in this brochure, including patent liability for intended applications, is the sole responsibility of the user. Such materials may present unknown health hazards and should be used with caution. Although certain hazards may be described in this brochure, Sanyo Chemical Industries, Ltd. can not guarantee that these are the only hazards that exist.
PRODUCT LIST
A portion of the printing costs for this printing paper is donated tothe Japan Committee "Vaccines for the World's Children".
PERFORMANCE CHEMICALS FOR POLYURETHANEAND POLYURETHANE-RELATED INDUSTRIES 1. Polyether Polyols for Flexible Slabstock Polyurethane Foams 2. Polyether Polyols for Automobile Hot Molded Seat Cushions 3. Polyether Polyols for Automobile High-Resilient Molded Seat Cushions 4. Polyether Polyols for Crushpad Foams 5. Polyether Polyols for Rigid Polyurethane Foams 6. Multi Functional Polyols 7. Example of Polyurethane Foam System 8. Polyether Polyols for CASE 9. Prepolymers and Raw Materials for Polyurethane Elastomers10. Base Materials for Synthetic Leathers11. Water-Borne Polyurethanes for Textile Processing12. Polyurethane Emulsions for Coatings
1. Emulsifiers for Emulsion Polymerization 2. Pigment Dispersants (Oligomer Type) 3. Resin Modifiers 4. Antistatic Agents 5. Mold Releasing Agents 6. Printing Ink Binders 7. Compounding Ingredients for Paints and Printing Inks 8. Pigment Dispersants (Surfactant Type) 9. Defoaming Agents10. Plasticizers for Polyurethane-Based Sealants
PERFORMANCE CHEMICALS FOR RESOURCEEXTRACTION AND MINING INDUSTRIESPERFORMANCE CHEMICALS FOR COSMETICS,
PHARMACEUTICALS, DETERGENTS AND AGRICHEMICALSPerformance Chemicals for Cosmetics 1. Base Materials for Shampoos (Anionic Type) 2. Base Materials for Shampoos (Amphoteric Type) 3. Foam Stabilizers and Thickeners for Shampoos 4. Base Materials for Body Washes 5. Base Materials for Hair Conditioners 6. Compounding Ingredients for Cosmetics 7. Emulsifiers for CosmeticsPerformance Chemicals for Pharmaceuticals 1. Tablet Binders 2. Base Materials for Ointments 3. Coating Agents for Tablets 4. Germicides (Pharmaceutical Use) 5. Other Products for PharmaceuticalsPerformance Chemicals for Detergents 1. Base Materials for Detergents 2. Germicides (Industrial Use) 3. Additives for Detergents 4. Base Materials for Household Fabric Softeners 5. Industrial Defoaming AgentsPerformance Chemicals for Agrichemicals 1. Emulsifiers for Emulsifiable Concentrates 2. Dispersants for Granule Preparations
1. Polymer Flocculants 2. Dewatering Accelerator 3. Cold Flow Improvers 4. Lubricity Improver 5. Dewaxing Aids
PERFORMANCE CHEMICALS FOR WASTEWATERTREATMENT 1. Polymer Flocculants 2. Aminoalkyl Methacrylate Monomers
PERFORMANCE CHEMICALS FOR CONSTRUCTIONAND PUBLIC WORKS 1. Flooring Materials 2. Polyurethane for Architectural Paints 3. Water Sealants 4. Waterproofing Agents 5. Concrete Admixtures 6. Dispersant for Manufacturing Cement Boards by Extrusion Molding 7. Foaming Agent for Foam Concrete 8. Agents for Drilling Mud 9. Waste Mud Solidification10. Polymer Flocculants for Gravel Washing Wastewater Treatment11. Binder for Ceramics
PERFORMANCE CHEMICALS FOR LUBRICANTINDUSTRIES AND MACHINERY & METALPROCESSING INDUSTRIES 1. Lubricating Oil Additives 2. Base Materials for Polyalkylene Glycol-Type Lubricants 3. Base Materials for Water-Soluble Quenchants 4. Base Materials for Hydraulic Fluids 5. Materials for Brake Fluids 6. Rust Inhibitors 7. Water-Soluble Cutting Fluids 8. Emulsifiers for Metal Working Oils 9. Base Materials for Metal Cleaners
PERFORMANCE CHEMICALS FOR SYNTHETICRESIN & RUBBER INDUSTRIES AND PAINT, INK &PIGMENT INDUSTRIES
ADHESIVES AND ADHESIVE-RELATED PRODUCTS 1. Pressure-Sensitive Adhesives (Cohesive Agents) 2. Potting Resins for Artificial Kidneys (Hollow-Fiber Type) 3. Resins for Anti-Corrosion Paints for Automobiles (for Improving Adhesion of Paints to Electrodeposition Steel) 4. Binders for Fiber-Finishing Agents 5. Binders for Fiberglass 6. Curing Agents for Epoxy Resins
1- (1). Lubricating Oil Additives (See page 6.)
Product Name Principal Component(Product Form) Uses and Features
1
* Automatic transmission fluids** Continuously variable transmission fluids
ACLUBE P-2100
ACLUBE P-4300
ACLUBE P-4070
ACLUBE P-2090
ACLUBE V-1030
ACLUBE V-3020
ACLUBE V-2000
ACLUBE V-D2000V-D2020
ACLUBE P-D3000
ACLUBE V-1040
ACLUBE V-4000V-4020V-5040
ACLUBE V-1001 A-1060 V-1082
ACLUBE V-2041
ACLUBE V-5000
ACLUBE V-4131
Methacrylate copolymer (Liquid)
Methacrylate copolymer (Liquid)
Methacrylate copolymer (Liquid)
Methacrylate copolymer (Liquid)
Methacrylate copolymer (Liquid)
Methacrylate copolymer (Liquid)
Methacrylate copolymer (Liquid)
Methacrylate copolymer (Liquid)
Methacrylate copolymer (Liquid)
Methacrylate copolymer (Liquid)
Methacrylate copolymer (Liquid)
Methacrylate copolymer (Liquid)
Methacrylate copolymer (Liquid)
Methacrylate copolymer (Liquid)
Methacrylate copolymer (Liquid)
ACLUBE P-2100 is a pour point depressant, suitable for medium-high viscosity base oils. It exhibits high shear stability.
ACLUBE P-4300 is a pour point depressant, particularly suitablefor medium-high viscosity base oils.
ACLUBE P-4070 is a pour point depressant, particularly suitablefor medium base oils.
ACLUBE P-2090 is a pour point depressant, suitable formedium-high viscosity base oils. It exhibits high shear stability.
ACLUBE V-1030 is a viscosity index improver, suitable for gear oils, ATF*, CVTF** and hydraulic fluids. It exhibits high shear stability.
ACLUBE V-3020 is a viscosity index improver, suitable for ATF*,gear oils and hydraulic fluids. It exhibits high thickening andlow-temperature viscosity properties.
ACLUBE V-2000 is a viscosity index improver, suitable for gear oils,ATF*, CVTF** and hydraulic fluids. It exhibits high shear stabilityand low-temperature viscosity properties for base oils.
These products are viscosity index improvers, suitable for ATF*,gear oils and hydraulic fluids. They exhibit high dispersibility, shear stability and low-temperature viscosity properties for base oils.
ACLUBE P-D3000 is a pour point depressant, suitable formedium-high viscosity base oils. It exhibits high dispersibility.
ACLUBE V-1040 is a viscosity index improver, suitable for ATF*, CVTF**, gear oils and hydraulic fluids. It exhibits high shear stability.
These products are viscosity index improvers, suitable for ATF*, gear oils and hydraulic fluids. They exhibit high thickening andlow-temperature viscosity properties.
These products are viscosity index improvers, suitable for ATF, CVTF, gear oils and hydraulic fluids. They exhibit high shear stability, viscosity index improvement and low-temperature viscosity properties.
ACLUBE V-2041 is a viscosity index improver, suitable for ATF*,CVTF**, gear oils and hydraulic fluids. It exhibits high shearstability and low-temperature viscosity properties.
ACLUBE V-5000 is a viscosity index improver, suitable for engineoils and hydraulic fluids. It exhibits high thickening andlow-temperature viscosity properties.
ACLUBE V-4131 is a viscosity index improver, suitable for ATF, CVTF, gear oils and hydraulic fluids. It exhibits high viscosity index improvement and low-temperature viscosity.
1- (2). Lubricating Oil Additives (See page 6.)
Product Name Principal Component(Product Form) Uses and Features
2. Base Materials for Polyalkylene Glycol-Type Lubricants
Product Name Principal Component(Product Form) Uses and Features
2
3. Base Materials for Water-Soluble Quenchants
Product Name Principal Component(Product Form) Uses and Features
ACLUBE V-5030 Methacrylate copolymer (Liquid)
ACLUBE V-5030 is a viscosity index improver, suitable for engineoils and hydraulic fluids. It exhibits high shear stability andimprovement effect of low-temperature properties.
NEWPOL LB Products
NEWPOL 50HBProducts
NEWPOL 75H-90000
ACLUBE V-D5020V-D4000
NEWPOL 50HBProducts
NEWPOL NSQ-870
NEWPOL V-22F
PEG-20000
NEWPOL 75H-90000
Polyoxypropylene glycolmonoalkyl ether (Liquid)
Poly(oxyethylene, oxy-propylene) glycol monoalkylether (Liquid)
Poly(oxyethylene, oxy-propylene) glycol (Liquid)
Poly(oxyethylene, oxy-propylene) glycol (Liquid)
Poly(oxyethylene, oxy-propylene) glycol monoalkylether (Liquid)
Poly(oxyethylene, oxy-propylene) glycol (Liquid)
Poly(oxyethylene, oxy-propylene) polyol (Liquid)
Polyethylene glycol (Flake)
Methacrylate copolymer (Liquid)
These products are polyalkylene glycol-type lubricants used forvarious purposes including compressor oils, gear oils and grease.They leave no residue after combustion. They cause practicallyno swelling and no shrinkage of natural or synthetic rubbers.When extremely high heat resistance is required, it is recommended to use NEWPOL LB products containing antioxidantsthat are suffixed with X as product names. See page 7.NEWPOL LB products: Insoluble in waterNEWPOL 50HB products: Soluble in water
NEWPOL 75H-90000 is polyalkylene glycol-type lubricant usedfor lithium soap grease as well as high temperature greasecompounded with graphite or molybdenum sulfide. It is solublein water.
These products are viscosity index improvers, suitable for engineoils and hydraulic fluids. They exhibit high dispersibility andimprovement effect of low-temperature properties.
The recommended concentration: 2–3 wt %. These products help to control the cooling rate of metals to behardened, including steel. NEWPOL 75H-90000: general-purpose type. NEWPOL NSQ-870: higher viscosity type of NEWPOL 75H-90000. NEWPOL 50HB products: low-viscosity type and resistant to heat deterioration. See page 7.PEG-20000: used for extremely hard steel. NEWPOL V-22F: desirable cooling performance even when used at low concentration.
3
5. Materials for Brake Fluids
Product Name Principal Component(Product Form) Uses and Features
4. Base Materials for Hydraulic Fluids
Product Name Principal Component(Product Form) Uses and Features
NEWPOL SBF-200
NEWPOL SBF-605
NEWPOL SBF-650
BFA-3
NEWPOL 75H-90000
NEWPOL V-10-C
NEWPOL NSQ-800
NEWPOL GEP-2800
NEWPOL GP-3000
NEWPOL 50HB-26050HB-40050HB-660
Polyoxyalkylene glycol monoalkyl ether (Liquid)
Polyoxyalkylene glycol monoalkyl ether (Liquid)
Polyoxyalkylene glycol monoalkyl ether borate (Liquid)
Proprietary compound (Liquid)
Poly(oxyethylene, oxy-propylene) glycol (Liquid)
Poly(oxyethylene, oxy-propylene) polyol (Liquid)
Poly(oxyethylene, oxy-propylene) polyol (Liquid)
Poly(oxyethylene, oxy-propylene) triol (Liquid)
Polyoxypropylene triol (Liquid)
Poly(oxyethylene, oxy-propylene) glycol monoalkyl ether (Liquid)
NEWPOL SBF-200 is a solvent for brake fluids having a high boiling point. When it is used with NEWPOL SBF-101, the mixture imparts a favorable degree of rubber swelling.Boiling point: higher than 240˚C. Kinematic viscosity (-40˚C): approx. 1100 mm2/s
NEWPOL SBF-605 is a solvent for brake fluids having a high boiling point. It swells rubber to a favorable degree. Boiling point: approx. 253˚C. Kinematic viscosity (-40˚C): approx. 930 mm2/s
NEWPOL SBF-650 is a solvent for brake fluids having a highboiling point. The depression of its boiling point is minimally affected by moisture absorption.Boiling point: approx. 258˚C. Kinematic viscosity (-40˚C): approx. 925 mm2/s
BFA-3 is a package type general-purpose additive for brake fluidswith antioxidative and rust preventive properties. The recommended concentration: 2–3 wt % for brake fluids.
These products are base materials for water-and-glycol type hydraulic fluids.They excel in oiliness and load resistance.
NEWPOL NSQ-800 is a base material for water-and-glycol type hydraulic fluids.It excels in wear resistance.
These products are base polymers for brake fluids.NEWPOL GEP-2800: water-soluble base polymer with high viscosityNEWPOL GP-3000: water-insoluble base polymer with high viscosityNEWPOL 50HB products: water-soluble base polymer with low-medium viscosities.
See page 7.
4
6. Rust Inhibitors
Product Name Principal Component(Product Form) Uses and Features
7. Water-Soluble Cutting Fluids
Product Name Principal Component(Product Form) Uses and Features
DSA
SANHIBITOR 150
SANHIBITOR 102
IONET S-80S-80S
SANHIBITOR No.2-1
SANHIBITOR No.50
SANHIBITOR OMA-10
HIGHCLEAN CFK
HIGHCLEAN CF-50
HIGHCLEAN S-7001
Alkenyl succinic anhydride (Liquid)
Alkenyl succinic acid ester (Liquid)
Proprietary anionic surfactant (Liquid)
Sorbitan monooleate (Liquid)
Proprietary anionic surfactant (Liquid)
Proprietary nonionic surfactant (Liquid)
Proprietary anionic surfactant (Liquid)
Proprietary compound mainlycomposed from anionicsurfactant (Liquid)
Proprietary anionic surfactant (Liquid)
Proprietary anionic surfactant (Liquid)
DSA is an oil-soluble rust inhibitor, suitable for lubricating oils, hydraulic fluids, metal working oils, liquid fuels, mineral oils, turbine oils, etc. It has excellent rust preventive and demulsifying properties.
SANHIBITOR 150 is an oil-soluble rust inhibitor.It imparts excellent rust preventive properties to lubricating oils such as turbine oils, and fuel oils when used in small amounts.
SANHIBITOR 102 is an oil-soluble rust inhibitor, suitable for turbine oils. Also, it is applicable for lubricating oils. It has excellent demulsifying properties.
These products have excellent rust preventive, lubricating andemulsifying properties. They are effective as additives for rustpreventive oils and metal working oils.
SANHIBITOR No.2-1 is a water-soluble and oil-soluble rustinhibitor. It has excellent rust-preventive properties on both ferrousand non-ferrous metals. It produces less foam.The recommended concentration: 0.2–0.5 wt %.
SANHIBITOR No.50 is a water-soluble rust inhibitor.It produces less foam and is easily rinsed. It has excellent rustpreventive properties and is resistant to heat and alkaline solutions. It is substitutable for alkanol amine.The recommended concentration: 0.2–0.5 wt %.
SANHIBITOR OMA-10 is a water-soluble rust inhibitor, suitable formetal working oils. It prevents rust even on nonferrous metals. The recommended concentration: 0.3–0.5 wt %.
HIGHCLEAN CF-50 is suitable for cutting cast iron. It exhibitshigh lubricities, cooling effects, rust preventive properties andputrefaction resistance. The working solution does not discolor,because it is rust preventive.
HIGHCLEAN S-7001 is suitable for light-duty cutting of steel andsteel alloy. It exhibits high rust preventive properties andputrefaction resistance. The residual fluid is easily washed off fromthe processed metal parts.
These products are suitable for light-duty cutting, includingaluminum alloy. They exhibit high lubricities, cooling effects, rustpreventive properties and putrefaction resistance.
5
8. Emulsifiers for Metal Working Oils
Product Name Principal Component(Product Form) Uses and Features
9. Base Materials for Metal Cleaners
Product Name Principal Component(Product Form) Uses and Features
NAROACTY CLProducts
EMULMIN No.Products
IONET D ProductsM Products
NEWPOL PE Products
SEDORAN FF-180FF-200FF-210FF-220
SEDORAN SF-506
SANNONIC Products
SEDORAN SNP-112
NAROACTY CLProducts
Polyoxyalkylene alkyl ether (Liquid or solid)
Polyoxyethylene diol higheralkyl ether (Liquid, paste or solid)
Polyoxyethylene diol fatty acidester (Liquid or solid)
Polyoxyethylenepolyoxypropylene glycol (Liquid, paste or flake)
Proprietary nonionic surfactant (Liquid)
Proprietary nonionic surfactant (Liquid)
Polyoxyalkylene alkyl ether (Liquid)
Proprietary nonionic surfactant (Liquid)
Polyoxyalkylene alkyl ether (Liquid or solid)
These products are used as emulsifiers and oiliness improvers formetal working oils. They have low toxicity and low irritancy.See page 8.
EMULMIN No. products are emulsifiers for mineral oils, and fatsand oils. EMULMIN 50 and 70 are useful as emulsifiers for mineral oils, while EMULMIN 70, 110 and 140 are suitable as emulsifiers for fats and oils. See page 8.
NAROACTY CL products are suitable for producing variousemulsifiers because they have a wide range of HLB values. Emulsion-type lubricating oil is produced when they are used withmineral oils. NAROACTY CL-40, CL-50 and CL-70 are applicableas emulsifiers for mineral oils. See page 7.
SEDORAN SF-506 is suitable as a base material for aciddetergents and alkaline degreasing agents, and as a cleaner basefor spray cleaning. It has high detergency and produces less foam.
These products are suitable as cleaner bases for automaticcleaning, such as jet-cleaning and spray cleaning. They are stablein a wide pH range. They produce less foam and have highdetergency and wettability.
NEWPOL PE products are suitable as cleaner bases for spraycleaning. They are stable in a wide pH range, and produce lessfoam. See page 9.
SANNONIC products are less corrosive to metals, suitable as basematerials for acid/alkaline detergents. They are also applicable asoiliness improvers, and emulsifiers for rolling oils and cutting oils.See page 9.
SEDORAN SNP-112 is suitable as a base material for aciddetergents and alkaline degreasing agents. It has high detergency,produces less foam, and is easily biodegradable.
NAROACTY CL products are less corrosive to metals, and are suitable as base materials for acid/alkaline detergents. They are also applicable as oiliness improvers and emulsifiers for rolling oils and cutting oils. See page 7.
6
1. Typical Properties of ACLUBE Products
Product Name Appearance(20 f 5°C)
Color(ASTM)
Kinematic Viscositymm2/s (100°C)
Densityg/cm3 (15°C)
NeutralizationNumber
Appendix
ACLUBE P-2090
ACLUBE P-2100
ACLUBE P-4070
ACLUBE P-4300
ACLUBE P-D3000
ACLUBE V-1001
ACLUBE V-1030
ACLUBE V-1040
ACLUBE A-1060
ACLUBE V-1082
ACLUBE V-2000
ACLUBE V-2041
ACLUBE V-3020
ACLUBE V-4000
ACLUBE V-4020
ACLUBE V-4131
ACLUBE V-5000
ACLUBE V-5030
ACLUBE V-5040
ACLUBE V-D2000
ACLUBE V-D2020
ACLUBE V-D4000
ACLUBE V-D5020
Straw-colored liquid
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
1.0
0.5
0.91
0.91
0.91
0.89
0.92
0.94
0.92
0.93
0.94
0.92
0.93
0.94
0.93
0.91
0.91
0.88
0.91
0.91
0.90
0.932
0.94
0.90
0.91
300
380
470
300
550
360
260
510
490
350
640
850
720
830
530
850
1,400
1,000
1,700
350
350
1,200
1,400
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.2
0.1
0.1
0.1
0.1
0.2
0.1
0.1
0.1
0.1
0.2
0.1
0.2
0.2
0.2
0.1
7
2. Typical Properties of NEWPOL 50HB Products and NEWPOL LB Products
Product Name Appearance(20 f 5°C)
Pour Point°C
Kinematic Viscositymm2/s (40°C)
Flash Point°C
3. Typical Properties of NAROACTY CL Products
Product Name Appearance(20 f 5°C)
pH(1 wt % aq soln) HLB Cloud Point °C
(2 wt % aq soln)
NEWPOL 50HB-55
NEWPOL 50HB-100
NEWPOL 50HB-260
NEWPOL 50HB-400
NEWPOL 50HB-660
NEWPOL 50HB-2000
NEWPOL 50HB-5100
NEWPOL LB-65
NEWPOL LB-285
NEWPOL LB-300X
NEWPOL LB-385
NEWPOL LB-400XY
NEWPOL LB-625
NEWPOL LB-650X
NEWPOL LB-1715
NEWPOL LB-1800X
NEWPOL LB-3000
NAROACTY CL-20
NAROACTY CL-40
NAROACTY CL-50
NAROACTY CL-70
NAROACTY CL-85
NAROACTY CL-95
NAROACTY CL-100
NAROACTY CL-120
NAROACTY CL-140
NAROACTY CL-160
NAROACTY CL-200
NAROACTY CL-400
Colorless topale yellow liquid
Colorless to pale yellow liquid
White solid
White flake
-65
-51
-40
-37
-34
-31
-28
-55
-40
-40
-37
-35
-33
-29
-22
-22
-19
8
19
51
80
127
398
925
9
59
70
80
84
120
130
335
351
610
93
183
225
246
225
233
251
148
217
236
220
215
222
252
228
258
230
5.7
8.9
10.0
11.7
12.6
13.1
13.3
14.1
14.7
15.2
16.0
17.8
6.5
6.5
6.5
6.5
6.5
6.5
6.5
6.5
6.5
6.5
6.5
6.5
< 20
< 20
< 20
< 20
41
54
64
80
93
99
> 100
> 100
* 1 wt % aqueous solution
8
4. Typical Properties of EMULMIN No. Products
5. Typical Properties of IONET D Products and IONET M Products
Product Name Principal Component Appearance(20 f 5˚C)
pH(1 wt % aq soln) HLB Cloud Point ˚C
(2 wt % aq soln)
Product Name Appearance(20 f 5˚C)
pH(1 wt % aq soln) HLB Cloud Point ˚C
(2 wt % aq soln)
IONET DL-200
IONET DO-400
IONET DO-600
IONET DO-1000
IONET DS-300
IONET MO-200
IONET MO-400
IONET MO-600
IONET MS-400
IONET MS-1000
EMULMIN 40
EMULMIN 50
EMULMIN 70
EMULMIN 110
EMULMIN 140
EMULMIN 180
EMULMIN 200
EMULMIN 240
Polyoxyethylene monostearate
Polyoxyethylene distearate
Polyoxyethylene monooleate
Polyoxyethylene dioleate
Polyoxyethylene dilaurate
Pale yellow solid
Yellow liquid
Pale straw-colored liquid
Pale yellow solid
Pale yellow solid
Brown liquid
Pale yellow liquid
Pale yellow liquid
Straw-colored liquid
Pale straw-colored liquid
Pale yellow liquid to paste
White to pale yellow wax
6.5
7.0
6.0
6.5
7.0
7.0
7.0
7.0
7.0
6.5
6.6
8.4
10.4
12.9
7.3
8.4
11.8
13.7
11.9
15.7
< 20
< 20
< 20
35
< 20
< 20
< 20
53
< 20
> 100
7.0
6.5
5.0
7.0
7.0
7.0
7.0
7.0
8.0
9.0
10.8
13.2
14.2
15.1
15.5
16.1
< 20
< 20
< 20
78*
91
> 100
> 100
> 100
9
6. Typical Properties of NEWPOL PE Products
Product Name
7. Typical Properties of SANNONIC Products
Product Name Appearance(20 f 5˚C)
pH(1 wt % aq soln) HLB Cloud Point ˚C
(2 wt % aq soln)
Appearance(20 f 5˚C)
pH(1 wt % aq soln) 0.1 wt % Aq Soln 1.0 wt % Aq Soln
Cloud Point˚C
(1 wt % aq soln)
Foaming Property*
Immediate After 5 min Immediate After 5 min
* Foam height in mm at 20˚C measured using the Ross-Miles method
*1 5 wt % aqueous solution*2 1 wt % aqueous solution
NEWPOL PE-61
NEWPOL PE-62
NEWPOL PE-64
NEWPOL PE-68
NEWPOL PE-71
NEWPOL PE-74
NEWPOL PE-75
NEWPOL PE-78
NEWPOL PE-108
SANNONIC FN-80
SANNONIC FN-100
SANNONIC FN-140
SANNONIC SS-50
SANNONIC SS-70
SANNONIC SS-90
SANNONIC SS-120
Colorless to pale yellow liquid
White paste
White paste
White flake
Colorless to pale yellow liquid
White flake
Colorless liquid
Pale yellow liquid
Colorless to pale yellow liquid
6.5
6.5
6.5
6.5*1
6.5*1
6.5*1
6.5*1
–
–
–
10.5
12.1
13.2
14.5
34
56
81
< 20
33*2
56*2
83*2
6.0
6.0
6.5
7.0
6.0
6.0
6.0
7.0
7.0
24
30
59
113
20
56
69
110
105
18
21
28
48
8
30
32
48
48
0
4
7
12
0
7
13
12
12
9
25
34
53
5
46
45
55
53
0
5
10
14
0
8
29
15
15
ALPHABETICAL INDEXACLUBE A-1060 .......................................... 1, 6ACLUBE P-2090 .......................................... 1, 6ACLUBE P-2100 ......................................... 1, 6ACLUBE P-4070 .......................................... 1, 6ACLUBE P-4300 .......................................... 1, 6ACLUBE P-D3000 ....................................... 1, 6ACLUBE V-1001 .......................................... 1, 6ACLUBE V-1030 .......................................... 1, 6ACLUBE V-1040 .......................................... 1, 6ACLUBE V-1082 .......................................... 1, 6ACLUBE V-2000 .......................................... 1, 6ACLUBE V-2041 .......................................... 1, 6ACLUBE V-3020 .......................................... 1, 6ACLUBE V-4000 .......................................... 1, 6ACLUBE V-4020 .......................................... 1, 6ACLUBE V-4131 .......................................... 1, 6ACLUBE V-5000 .......................................... 1, 6ACLUBE V-5030 .......................................... 2, 6ACLUBE V-5040 .......................................... 1, 6ACLUBE V-D2000 ........................................ 1, 6ACLUBE V-D2020 ........................................ 1, 6ACLUBE V-D4000 ........................................ 2, 6ACLUBE V-D5020 ........................................ 2, 6BFA-3 .............................................................. 3DSA ................................................................. 4EMULMIN 40 .............................................. 5, 8EMULMIN 50 .............................................. 5, 8EMULMIN 70 .............................................. 5, 8EMULMIN 110 ............................................ 5, 8EMULMIN 140 ............................................ 5, 8EMULMIN 180 ............................................ 5, 8EMULMIN 200 ............................................ 5, 8EMULMIN 240 ............................................ 5, 8HIGHCLEAN CF-50 ........................................ 4HIGHCLEAN CFK ........................................... 4HIGHCLEAN S-7001 ...................................... 4IONET DL-200 ............................................ 5, 8IONET DO-400 ........................................... 5, 8IONET DO-600 ........................................... 5, 8IONET DO-1000 ......................................... 5, 8IONET DS-300 ............................................ 5, 8IONET MO-200 ........................................... 5, 8IONET MO-400 ........................................... 5, 8IONET MO-600 ........................................... 5, 8IONET MS-400 ........................................... 5, 8IONET MS-1000 ......................................... 5, 8IONET S-80 .................................................... 4IONET S-80S .................................................. 4NAROACTY CL-20 ...................................... 5, 7NAROACTY CL-40 ...................................... 5, 7NAROACTY CL-50 ...................................... 5, 7NAROACTY CL-70 ...................................... 5, 7NAROACTY CL-85 ...................................... 5, 7NAROACTY CL-95 ...................................... 5, 7NAROACTY CL-100 .................................... 5, 7NAROACTY CL-120 .................................... 5, 7NAROACTY CL-140 .................................... 5, 7NAROACTY CL-160 .................................... 5, 7
NAROACTY CL-200 .................................... 5, 7NAROACTY CL-400 .................................... 5, 7NEWPOL 50HB-55 ..................................... 2, 7NEWPOL 50HB-100 .................................... 2, 7NEWPOL 50HB-260 ................................ 2, 3, 7NEWPOL 50HB-400 ................................ 2, 3, 7NEWPOL 50HB-660 ................................ 2, 3, 7NEWPOL 50HB-2000 .................................. 2, 7NEWPOL 50HB-5100 .................................. 2, 7NEWPOL 75H-90000 .................................. 2, 3NEWPOL GEP-2800 ....................................... 3NEWPOL GP-3000 .......................................... 3NEWPOL LB-65 ........................................... 2, 7NEWPOL LB-285 ........................................ 2, 7NEWPOL LB-300X ...................................... 2, 7NEWPOL LB-385 ........................................ 2, 7NEWPOL LB-400XY .................................... 2, 7NEWPOL LB-625 ........................................ 2, 7NEWPOL LB-650X ...................................... 2, 7NEWPOL LB-1715 ...................................... 2, 7NEWPOL LB-1800X .................................... 2, 7NEWPOL LB-3000 ...................................... 2, 7NEWPOL NSQ-800 ......................................... 3NEWPOL NSQ-870 ......................................... 2NEWPOL PE-61 .......................................... 5, 9NEWPOL PE-62 .......................................... 5, 9NEWPOL PE-64 .......................................... 5, 9NEWPOL PE-68 .......................................... 5, 9NEWPOL PE-71 .......................................... 5, 9NEWPOL PE-74 .......................................... 5, 9NEWPOL PE-75 .......................................... 5, 9NEWPOL PE-78 .......................................... 5, 9NEWPOL PE-108 ........................................ 5, 9NEWPOL SBF-200 .......................................... 3NEWPOL SBF-605 .......................................... 3NEWPOL SBF-650 .......................................... 3NEWPOL V-10-C ............................................. 3NEWPOL V-22F ............................................... 2PEG-20000 ...................................................... 2SANHIBITOR 102 ............................................ 4SANHIBITOR 150 ............................................ 4SANHIBITOR No.2-1 ....................................... 4SANHIBITOR No.50 ........................................ 4SANHIBITOR OMA-10 .................................... 4SANNONIC FN-80 ....................................... 5, 9SANNONIC FN-100 ..................................... 5, 9SANNONIC FN-140 ..................................... 5, 9SANNONIC SS-50 ....................................... 5, 9SANNONIC SS-70 ....................................... 5, 9SANNONIC SS-90 ....................................... 5, 9SANNONIC SS-120 ..................................... 5, 9SEDORAN FF-180 .......................................... 5SEDORAN FF-200 .......................................... 5SEDORAN FF-210 .......................................... 5SEDORAN FF-220 .......................................... 5SEDORAN SF-506 .......................................... 5SEDORAN SNP-112 ....................................... 5
10
PERFORMANCE CHEMICALS FOR LUBRICANT INDUSTRIESAND MACHINERY & METAL PROCESSING INDUSTRIES
1. Lubricating Oil Additives 2. Base Materials for Polyalkylene Glycol-Type Lubricants 3. Base Materials for Water-Soluble Quenchants 4. Base Materials for Hydraulic Fluids 5. Materials for Brake Fluids 6. Rust Inhibitors 7. Water-Soluble Cutting Fluids 8. Emulsifiers for Metal Working Oils 9. Base Materials for Metal Cleaners
IMPORTANT :Before handling these products, refer to the current Safety Data Sheet for recommendedprotective equipment, and detailed precautionary and hazards information.
SANYO CHEMICAL PRODUCT OUTLINE
Printed in Japan on April 13, 2017 C841708 KURO, TAI (1000)
PRODUCT LIST
For detailed information, please contact Tokyo Area Sales & Marketing Office of Sanyo Chemical Industries, Ltd.E-mail: [email protected] Fax: +81 - 3 - 3245 - 1697URL: https://www.sanyo-chemical.co.jp/eng Tel: +81 - 3 - 5200 - 3400Address: No.10 Chuo Bldg., 1 - 5 - 6 Nihonbashi - honcho, Chuo - ku, Tokyo 103 - 0023, Japan
This brochure has been prepared solely for information purposes. Sanyo Chemical Industries, Ltd. extends no warranties and makes no representations as to the accuracy or completeness of the information contained herein, and assumes no responsibility regarding the suitability of this information for any intended purposes or for any consequences of using this information. Any product information in this brochure is without obligation and commitment, and is subject to change at any time without prior notice. Consequently anyone acting on information contained in this brochure does so entirely at his/her own risk. In particular, final determination of suitability of any material described in this brochure, including patent liability for intended applications, is the sole responsibility of the user. Such materials may present unknown health hazards and should be used with caution. Although certain hazards may be described in this brochure, Sanyo Chemical Industries, Ltd. can not guarantee that these are the only hazards that exist.
PRODUCT LIST
A portion of the printing costs for this printing paper is donated tothe Japan Committee "Vaccines for the World's Children".
PERFORMANCE CHEMICALS FOR POLYURETHANEAND POLYURETHANE-RELATED INDUSTRIES 1. Polyether Polyols for Flexible Slabstock Polyurethane Foams 2. Polyether Polyols for Automobile Hot Molded Seat Cushions 3. Polyether Polyols for Automobile High-Resilient Molded Seat Cushions 4. Polyether Polyols for Crushpad Foams 5. Polyether Polyols for Rigid Polyurethane Foams 6. Multi Functional Polyols 7. Example of Polyurethane Foam System 8. Polyether Polyols for CASE 9. Prepolymers and Raw Materials for Polyurethane Elastomers10. Base Materials for Synthetic Leathers11. Water-Borne Polyurethanes for Textile Processing12. Polyurethane Emulsions for Coatings
1. Emulsifiers for Emulsion Polymerization 2. Pigment Dispersants (Oligomer Type) 3. Resin Modifiers 4. Antistatic Agents 5. Mold Releasing Agents 6. Printing Ink Binders 7. Compounding Ingredients for Paints and Printing Inks 8. Pigment Dispersants (Surfactant Type) 9. Defoaming Agents10. Plasticizers for Polyurethane-Based Sealants
PERFORMANCE CHEMICALS FOR RESOURCEEXTRACTION AND MINING INDUSTRIESPERFORMANCE CHEMICALS FOR COSMETICS,
PHARMACEUTICALS, DETERGENTS AND AGRICHEMICALSPerformance Chemicals for Cosmetics 1. Base Materials for Shampoos (Anionic Type) 2. Base Materials for Shampoos (Amphoteric Type) 3. Foam Stabilizers and Thickeners for Shampoos 4. Base Materials for Body Washes 5. Base Materials for Hair Conditioners 6. Compounding Ingredients for Cosmetics 7. Emulsifiers for CosmeticsPerformance Chemicals for Pharmaceuticals 1. Tablet Binders 2. Base Materials for Ointments 3. Coating Agents for Tablets 4. Germicides (Pharmaceutical Use) 5. Other Products for PharmaceuticalsPerformance Chemicals for Detergents 1. Base Materials for Detergents 2. Germicides (Industrial Use) 3. Additives for Detergents 4. Base Materials for Household Fabric Softeners 5. Industrial Defoaming AgentsPerformance Chemicals for Agrichemicals 1. Emulsifiers for Emulsifiable Concentrates 2. Dispersants for Granule Preparations
1. Polymer Flocculants 2. Dewatering Accelerator 3. Cold Flow Improvers 4. Lubricity Improver 5. Dewaxing Aids
PERFORMANCE CHEMICALS FOR WASTEWATERTREATMENT 1. Polymer Flocculants 2. Aminoalkyl Methacrylate Monomers
PERFORMANCE CHEMICALS FOR CONSTRUCTIONAND PUBLIC WORKS 1. Flooring Materials 2. Polyurethane for Architectural Paints 3. Water Sealants 4. Waterproofing Agents 5. Concrete Admixtures 6. Dispersant for Manufacturing Cement Boards by Extrusion Molding 7. Foaming Agent for Foam Concrete 8. Agents for Drilling Mud 9. Waste Mud Solidification10. Polymer Flocculants for Gravel Washing Wastewater Treatment11. Binder for Ceramics
PERFORMANCE CHEMICALS FOR LUBRICANTINDUSTRIES AND MACHINERY & METALPROCESSING INDUSTRIES 1. Lubricating Oil Additives 2. Base Materials for Polyalkylene Glycol-Type Lubricants 3. Base Materials for Water-Soluble Quenchants 4. Base Materials for Hydraulic Fluids 5. Materials for Brake Fluids 6. Rust Inhibitors 7. Water-Soluble Cutting Fluids 8. Emulsifiers for Metal Working Oils 9. Base Materials for Metal Cleaners
PERFORMANCE CHEMICALS FOR SYNTHETICRESIN & RUBBER INDUSTRIES AND PAINT, INK &PIGMENT INDUSTRIES
ADHESIVES AND ADHESIVE-RELATED PRODUCTS 1. Pressure-Sensitive Adhesives (Cohesive Agents) 2. Potting Resins for Artificial Kidneys (Hollow-Fiber Type) 3. Resins for Anti-Corrosion Paints for Automobiles (for Improving Adhesion of Paints to Electrodeposition Steel) 4. Binders for Fiber-Finishing Agents 5. Binders for Fiberglass 6. Curing Agents for Epoxy Resins