12
PRODUCT GUIDE 2015
ORDERING INFO
DS16-P A80123 Connectors up to ø16mm | Cables 2-8mm
DS21A-P A80124 Connectors up to ø21mm | Cables 4-9mm
DS21B-P A80125 Connectors up to ø21mm | Cables 9-14mm
DS30-P A80126 Connectors up to ø30mm | Cables 9-14mm
DS-MULTI A80127 Multiple cables up to ø18mm
ScanstrutItem Code
RaymarineItem Code
Description
Electronics and seawater are not the best of friends and it’s essential that your installation remains dry inside.
The Scanstrut range of Electrical Accessories will ensure you complete your marine electronics install in the best way possible.
Electrical Accessories
Deck Seals
The only guaranteed and proven watertight installation for your antenna and navlight cables.
Pass cables into the boat, anywhere on deck. No need to remove cable plug.
Low pro�le shape for a stronger, impact resistant seal. No sharp edges to hit your foot on!
Supplied with blank and pre-drilled inner seals.
Split seal eliminates need to remove cable connectors during install.
Captive nuts in base provide easy assembly and allow reliable repeat installations.
Designed to �t multiple cables up to 15mm dia. Supplied with undrilled seal and made from marine grade aluminum with hard anodised �nish to resist impact marks.
WATERPROOF GUARANTEEIPX6 & IPX7 Tested & Approved.
Junction Box
The ‘�t and forget’ Junction Box range is the perfect sailing accessory for anyone planning boat maintenance, providing secure, IP66 watertight connections for marine electrical cables onboard any boat.
Choice of ‘standard’ box with 5 screw-down terminals or a ‘deluxe’ version which includes 10 fast-�t terminals for a quicker install.
Fit directly to chosen surface. A mounting bracket is included to allow easy removal for inspection.
Upgrade to IP67 with a Cable Seal upgrade kit.
Multi Deck Seal
11
•
•
•
•
•
•
•
ORDERING INFO
SB-8-5 A80129 Standard Junction Box | 5 screw down terminals
SB-8-10 A80130 Deluxe Junction Box | 10 fast �t terminals
SB-2G A80128 Cable Seal Pack (x2)
ScanstrutItem Code
RaymarineItem Code
Description
Visit www.scanstrut.com for further information.
Camera Mounts
ORDERING INFO
CAM-PT-150 A80119 PowerTower* - 150mm height
CAM-MM-01 A80118 Mast Mount*
PowerTower* - 300mm heightA80120CAM-PT-300
*Compatible with M-Series, T-Series & Navigator
ScanstrutItem Code
RaymarineItem Code
Description
CAMERAS
Options for installing Raymarine thermal imaging cameras onto your power or sail boat for maximum visibility at all times.
Compact Mast Mount for installation onto yacht masts.
Same great features as our standard Mast Mount range (see page X).
Camera Mast MountRaise your Camera from the deck to ensure clear visibility at all times. Designed with a 30° aft leaning profile and a small base footprint.
Camera PowerTower
ORDERING INFO
RL-RM-RYM A80295
ScanstrutItem Code
RaymarineItem Code
Description
A multi position mount for small electronic devices onboard.
Install fishfinders and chartplotters at the helm, RIB console, fishing boat dashboard , nav station and more.
ROKKINSTRUMENTS DISPLAYS
Adjustable Deck Mount
Designed to be versatile. Mount anywhere onboard.
‘Set and forget’ system ensures zero loss of clamping force over time.
Locking design provides a rock solid platform and a high clamping force with minimal e�ort from user.
Engineered to withstand high shock loading.
Corrosion resistant alloy castings, anodised and powder coated for extreme marine durability.
Easily adjusted. Unlock, reposition, lock again.
360° of rotation. 136° of tilt.
10
•
•
•
•
•
• Same great features as our standard PowerTower range (see page X).
•
RL-ARM-RYM
RL-ADM-RYM
A80294
A80293
All Rokk Mounts for a6, a7, e7 & Dragon�y
Compatability
rail mount
adjustable rail mountadjustable deck mount
Deck Pod
Mast Pod
Rail Pod
ORDERING INFO
SPM-MAXI-C X10309 3 x ST70+ Maxi Instruments (Carbon)
SPM-3I-W A80106 3 x Std Instruments
SPM-4I-W A80149 4 x Std Instruments
SPM-2MAXI-W A80108 2 x ST70+ Maxi Instruments
SPM-MAXI-W A80109 3 x ST70+ Maxi Instruments
SPR-7-RM A80239 For a6 to e7 (Rail Mounted)
SPR-7-AM A80240 For a6 to e7 (Arm Mounted)
ScanstrutItem Code
RaymarineItem Code
Description
ORDERING INFO
ScanstrutItem Code
RaymarineItem Code
Description
ORDERING INFO
ScanstrutItem Code
RaymarineItem Code
Description
SPD-8D-W A80103 Up to 9” Displays
SPD-12D-W A80104 Up to 12” Displays
SPD-15D-W A80105 Up to 15” Displays
SPD-7-W-E7 A80185 For e7
SPD-8-W-E9 A80186 Pre-cut for e9 MFD
SPD-12-W-E12 A80187 Pre-cut for e12 MFD
SPD-4XI-W A80193 1 x e7 & 2 x i70
Options to installDesigned with options to install 7” displays or 1 standard instrument.
Arm Mounted
Extend the Pod away from narrow or crowded rails for better viewing. Designed to ensure the Pod is always positioned for best viewing whatever the angle of the rail. Cables are routed internally and accessed easily via a removable cover.
Rail Mounted
Fit your display onto standard and curved rails. Viewing angled can set upon installation. Cables are routed internally through clamp and into the rail.
Swivel & tilt baseOne handed quick release action. Simply release the lever, swivel and tilt to suit requirements before lockng back into position.
Best viewing angleAn adjustable ball joint allows range of movement and multiple mounting angles.
Added strengthAn inner bracing plate secures the Deck Pod base to the pod and gives increased rigidty to the assembly eliminating potential damage from shock and vibration.
Universal mountThe range has been designed to �t mast sizes from 76mm to 223mm. Mast arms pivot about semi circular washers and an additional cross-brace provides sti�ness preventing sideways movement.
Current sailboat designs often have very open cockpits with few options for installing retro-�t instruments. The new Arm and Rail Mount options allow smaller instruments and chartplotters to be rail mounted anywhere onboard.
Solve the challenge of �nding a level mounting surface to install your displays onto your powerboat, RIB or sailbot wheelhouse.
Using a one-handed quick release lever, simply release, swivel and tilt to suit your requirements before locking back into position.
Whether racing or cruising, our Mast Pods give you the best view of your instruments.
Mast arms pivot to provide a universal �t to a wide range of mast sizes. A cross-brace adds rigidity and prevents sideways movement of the pod.
•
•
•
•
•
Carb
on M
ast P
od
9
Scanpod
Helm Pod
INSTRUMENTS DISPLAYS
Great design and neat features ensure the Scanstrut Helm Pod is the perfect choice for all cockpit con�gurations.
Our unique ‘No-Drill’ clamping system provides a universal �t on any pedestal rail. A set of mounting saddles gives a secure, watertight �xture at the rear of the pod.
Universal helm �xingFits pedestal rails from 25mm to 33.7mm. Using a unique clamping system, the pod can �t rail widths from 178mm upwards.
No Drill �xing kitCustomised U-bolts �t around rail and through the saddles into the back of the pod eliminating the need for time consuming and awkward drilling of the stainless rail.
Secure & watertight installA saddle system supports the stainless tubing to allow a secure and rigid �t onto any pedestal and also ensures a watertight seal at cable entry.
8
The product of choice for leading boat builders World-
wide, the Scanpod range has gained an enviable reputation
for exceptional quality since its launch in 2009.
SPH-3I-W A80110 3 x Std Instruments
SPH-8D-W A80112 Up to 9” Displays
SPH-12D-W A80113 Up to 12” Displays
SPH-15D-W A80114 Up to 15” Displays
SPH-SYSTEM-W A80115 9” Display + 4 Std Instruments / 12” Display + 2 Std Instruments
SPH-8-W-E9 A80183 Pre-cut for e9 MFD
SPH-12-W-E12 A80184 Pre-cut for e12 MFD
SPH-4XI-W A80194 1 x e7 & 2 x i70
ORDERING INFO
ScanstrutItem Code
RaymarineItem Code
Description
•
•
•
• Single piece composite GRP moulding for high strength and corrosion resistance*.
• and antenna.
• and maintenance.
* Stainless steel mounts available to install larger KVH M9 & Intellian i9 antenna.
Satcom Antenna Mount
ORDERING INFO
SC35 X10021-SCA Fits 37STV
SC30 X10018-SCA Fits 33STV
Fits 45STVX10022-SCASC45R
SC65 X10023-SCA Fits 60STV
ScanstrutItem Code
RaymarineItem Code
Description
SATCOM/TV
Reduce the footprint size of your satcom antenna by up to 60% to give you greater choice when choosing where to install your satcom antenna.
Adjustable Base Wedge
Satcom antennas require a horizontal mounting surface to function correctly.
Satcom wedges eradicate this problem by providing a level mounting on slopes from 0° to 12°.
Simply counter rotate the angled discs until the top surface is horizontal.
TIP: Mounting on a curved arch? The Adjustable Base Wedge accessory will solve your problem and level your satcom installation.
7
ACCESSORIES AVAILABLE:
SC50 X10026-SCA Compatible with SC35, SC45R and SC65 only.
ScanstrutItem Code
RaymarineItem Code
Description
•
• Install up to 4 GPS/VHF antenna.
• Hollow wings and stem allow hidden cabling.
• Option available to mount additional 30cm/40cm satcom at the top of the mast.
Dual PowerTower
ORDERING INFO
DPT-SR1-30 X10014-SCA Radar* + 33STV/37STV
Radar* + 45STVX10015-SCADPT-SR1-40
DPT-S01-40 X10016-SCA Open array** + 45STV
ScanstrutItem Code
RaymarineItem Code
Description
ORDERING INFO
PTM-R1-1 A80147 Radar*
Radar* + 45STVA80148PTM-R1-S40
ScanstrutItem Code
RaymarineItem Code
Description
RADOMES OPEN ARRAY SATCOM/TV
Tapered Mast
Elevating the satcom antenna above the radar eliminates antenna interference and ensures maximum performance from both applications.
Single combination mount for multiple marine electronics. Each item is positioned for maximum performance.
Features an adjustable mounting plate to allow for variation in radome size.
Positions the radar as close as possible to the structural centre of gravity, ensuring minimal load is placed on the radar arch.
TIP: Ideal for smaller powerboats where mounting space is limited.
Compact Dual PowerTower
SATCOM/TVRADOMES
CAMERAS
GPS / VHF ANTENNA
LIGHTS
6
• Antenna fastens to PowerTower using own mounting bolts.
• Pre-drilled mounting holes for ease of installation.
• IP65 gland supplied to seal cable into stem for internal cable management.
• Watertight base seal included – no need for messy sealant.
*Compatible with RD418D / RD424D / RD418HD / RD424HD
**Compatible with RA1048D / RA3048HD / RA1048SHD / RA3048SHD
*Compatible with RD418D / RD424D / RD418HD / RD424HD
• Antenna fastens to PowerTower using own mounting bolts.
• Pre-drilled mounting holes for ease of installation.
• IP65 gland supplied to seal cable into stem for internal cable management.
• Watertight base seal included – no need for messy sealant.
Stronger for heavier equipment.
• White powder coated.
• 25° forward leaning (30° aft
leaning for open array).
• Choice of 130mm (5”) or 250mm (10”) heights.
Lightweight, suits any boat.
•
• 30° aft leaning.
• Choice of 150mm (6”) or 350mm (14”) heights.
Ideal for narrow RIB arches.
•
• 30° aft leaning.
• 150mm (6”) height.
PowerTower
ORDERING INFO
PT2001 X10012-SCA 350mm height | Composite
150mm height | CompositeX10013-SCAPT2004
SPT1001 A80121 150mm height | Stainless steel
130mm height | AluminiumA80122APT19000
ScanstrutItem Code
RaymarineItem Code
Description
RADOMES SATCOM/TV
Install your antenna on the cabin roof, flybridge or radar arch of your powerboat.
Aluminium Composite Stainless steel
Choice of material:
5
Nav Light and GPS / VHF Antenna Mount
Install Nav Light, GPS or VHF antennas above the radar for maximum visibility and performance.
Attach using radar mounting bolts, no extra fastenings required. (1” by 14 tpi thread)
ACCESSORIES AVAILABLE:
Compatible with RD418D / RD424D / RD418HD / RD424HDSC110 X10017-SCA For Nav Lights (Port mounted)
SC111 X10018-SCA For GPS / VHF Antenna (Starboard mounted)
SC112 X10019-SCA For GPS / VHF Antenna (Port mounted)
ScanstrutItem Code
RaymarineItem Code
Description
• 1.9m (6.4’) recommended for level deck mounting and 2.5m (8.3’) recommended for sloping transoms.
• Accommodates two cable channels with a cover strip to hold cables in place and out of view.
• Two support modules provide maximum fore / aft and sideways support.
• Unscrew base and remove pole for racing or winter storage, leaving just
Rail stand-o� Deck strut Adjustable base
SC100 Pole Mount
Nav Light and GPS / VHF Antenna Mount
Install Nav Light, GPS or VHF antennas above the radar for maximum visibility and performance.
Attach using radar mounting bolts, no extra fastenings required. (1” by 14 tpi thread)
ORDERING INFO
SC101 X10010-SCA 1.9m height SC100 Pole*
2.5m height SC100 Pole*X10011-SCASC102
4m Through Deck SC2 Pole**X10120-SCASC2-4
ScanstrutItem Code
RaymarineItem Code
Description
RADOMES SATCOM/TV
Versatile pole mount for deck or transom mounting. No customisation or adjustment required, it works straight from the box.
4
ACCESSORIES AVAILABLE:
*Compatible with RD418D / RD424D / RD418HD / RD424HD
**Compatible with RD418D / RD424D / RD418HD / RD424HD Use with SC45R for 45STV / with SC65 for 60STVSC110 X10017-SCA For Nav Lights (Port mounted)
SC111 X10018-SCA For GPS / VHF Antenna (Starboard mounted)
SC112 X10019-SCA For GPS / VHF Antenna (Port mounted)
ScanstrutItem Code
RaymarineItem Code
Description
• Attaches to mast with four swivel feet, matching a variety
•
•
• Safety wire kit independently attaches scanner to mast for additional protection.
Mast Mount
Radar Guard
Polished stainless guards protect radome from damage and reduce wear on the sails.
Mounted using radome bolts, no extra fastenings required.
ORDERING INFO
M92722 M92722 To �t RD418D / RD418HD
To �t RD424D / RD424HDM92698M92698
ScanstrutItem Code
RaymarineItem Code
Description
RADOMES SATCOM/TV
Still the first choice for boat owners Worldwide, Scanstrut leads the way with a new generation of Mast Mounts.
Stronger. Lighter. Easier to �t.
3
ACCESSORIES AVAILABLE:
SC27 X1006-SCA To �t M92722
ScanstrutItem Code
RaymarineItem Code
Description
• • Can be installed on both adjustable and split backstays.
• Options to mount radome fore or aft of backstay.
• 2.6m (8’6”) aluminium mounting pole – supplied in 2 lengths with hidden joiner piece.
• Can be deck, transom or chainplate mounted.
• Range of nylon bushes supplied. Clamps around backstay so cable tension can be adjusted.
Backstay Mounted Mast Mounted
•
TIP: When mounting radome forward of backstay, check clearance between radome and mainsail.
Self-Levelling Radar Mount
Beautifully styled and expertly engineered to ensure your radar stays level with the horizon at all times for optimum antenna performance.
As the boat heels or rolls, the radar is kept horizontal preventing target loss and giving the best possible radar picture.
Maintenance free & no power required.
Radome cradle with �ne tune adjustment for di�erent mast rake angles.
• Attaches to mast with four swivel feet, matching a variety of mast pro�les.
"Picture perfect radar performance."
As tested by
ACCESSORIES AVAILABLE:
GPS / VHF Antenna Mount for Self-Lev-elling Radar Mount
Single mount for installing an additional GPS / VHF antenna above the radar. (1” by 14 tpi thread)
ORDERING INFO
LMB-A1 X10002-SCA Backstay Mount (aft mounted radar)
LM-GPS A80117 For all Leveller models
Backstay Mount (fore mounted radar)
Mast Mount
X10001-SCA
X10000-SCA
LMB-F1
LMM-F1
All compatible with RD418D / RD424D / RD418HD / RD424HD
ScanstrutItem Code
RaymarineItem Code
Description
2
RADOMES
ScanstrutItem Code
RaymarineItem Code
Description
Self-Levelling Radar Mount
RADAR OPEN ARRAY
Raymarine Marine Electronics
Scanstrut Products SATCOM GPS ANTENNA DISPLAYS INSTRUMENTS CAMERAS PAGE
Mast Mount
SC100 Pole Mount
PowerTower
Dual PowerTower
Electrical Accessories
With over 25 years experience, make Scanstrut an essential part of your Raymarine electronics installa-tion.
Fully endorsed and recommended by Raymarine, a selection of the best-selling Scanstrut range is stocked centrally and available to order from Raymarine dealers worldwide.
We offer a range of products to install the following:
Visit www.scanstrut.com for further product information and technical specifications.
Marine Electronics Mounts
We o�er a standard range of over 100 di�erent installation products to mount your Raymarine radar, satcom, MFD displays, instruments, cameras and GPS antennas onto yachts, powerboats, commercial and military vessels.
Electrical Accessories
Electronics and seawater are not the best of friends and it’s essential that your installation remains dry inside.
The Scanstrut range of Electrical Accessories will ensure you complete your marine electronics install in the best way possible.
Scanstrut Accessories
A range of Accessories is available for your Scanstrut installation. From mounting an additional light or GPS Antenna, to accessories which aid installation and performance.
2
3
4
5
6
11
Scanpod 8/9 ROKK 10 Camera Mounts 10
Satcom Antenna Mount 7
Tapered Mast 6
Product Guide
PRODUCTGUIDE
2015
ORDERING INFO
DS16-P A80123 Connectors up to ø16mm | Cables 2-8mm
DS21A-P A80124 Connectors up to ø21mm | Cables 4-9mm
DS21B-P A80125 Connectors up to ø21mm | Cables 9-14mm
DS30-P A80126 Connectors up to ø30mm | Cables 9-14mm
DS-MULTI A80127 Multiple cables up to ø18mm
ScanstrutItem Code
RaymarineItem Code
Description
Electronics and seawater are not the best of friends and it’s essential that your installation remains dry inside.
The Scanstrut range of Electrical Accessories will ensure you complete your marine electronics install in the best way possible.
Electrical Accessories
Deck Seals
The only guaranteed and proven watertight installation for your antenna and navlight cables.
Pass cables into the boat, anywhere on deck. No need to remove cable plug.
Low pro�le shape for a stronger, impact resistant seal. No sharp edges to hit your foot on!
Supplied with blank and pre-drilled inner seals.
Split seal eliminates need to remove cable connectors during install.
Captive nuts in base provide easy assembly and allow reliable repeat installations.
Designed to �t multiple cables up to 15mm dia. Supplied with undrilled seal and made from marine grade aluminum with hard anodised �nish to resist impact marks.
WATERPROOF GUARANTEEIPX6 & IPX7 Tested & Approved.
Junction Box
The ‘�t and forget’ Junction Box range is the perfect sailing accessory for anyone planning boat maintenance, providing secure, IP66 watertight connections for marine electrical cables onboard any boat.
Choice of ‘standard’ box with 5 screw-down terminals or a ‘deluxe’ version which includes 10 fast-�t terminals for a quicker install.
Fit directly to chosen surface. A mounting bracket is included to allow easy removal for inspection.
Upgrade to IP67 with a Cable Seal upgrade kit.
Multi Deck Seal
11
•
•
•
•
•
•
•
ORDERING INFO
SB-8-5 A80129 Standard Junction Box | 5 screw down terminals
SB-8-10 A80130 Deluxe Junction Box | 10 fast �t terminals
SB-2G A80128 Cable Seal Pack (x2)
ScanstrutItem Code
RaymarineItem Code
Description
Visit www.scanstrut.com for further information.
Camera Mounts
ORDERING INFO
CAM-PT-150 A80119 PowerTower* - 150mm height
CAM-MM-01 A80118 Mast Mount*
PowerTower* - 300mm heightA80120CAM-PT-300
*Compatible with M-Series, T-Series & Navigator
ScanstrutItem Code
RaymarineItem Code
Description
CAMERAS
Options for installing Raymarine thermal imaging cameras onto your power or sail boat for maximum visibility at all times.
Compact Mast Mount for installation onto yacht masts.
Same great features as our standard Mast Mount range (see page X).
Camera Mast MountRaise your Camera from the deck to ensure clear visibility at all times. Designed with a 30° aft leaning profile and a small base footprint.
Camera PowerTower
ORDERING INFO
RL-RM-RYM A80295
ScanstrutItem Code
RaymarineItem Code
Description
A multi position mount for small electronic devices onboard.
Install fishfinders and chartplotters at the helm, RIB console, fishing boat dashboard , nav station and more.
ROKKINSTRUMENTS DISPLAYS
Adjustable Deck Mount
Designed to be versatile. Mount anywhere onboard.
‘Set and forget’ system ensures zero loss of clamping force over time.
Locking design provides a rock solid platform and a high clamping force with minimal e�ort from user.
Engineered to withstand high shock loading.
Corrosion resistant alloy castings, anodised and powder coated for extreme marine durability.
Easily adjusted. Unlock, reposition, lock again.
360° of rotation. 136° of tilt.
10
•
•
•
•
•
• Same great features as our standard PowerTower range (see page X).
•
RL-ARM-RYM
RL-ADM-RYM
A80294
A80293
All Rokk Mounts for a6, a7, e7 & Dragon�y
Compatability
rail mount
adjustable rail mountadjustable deck mount
Deck Pod
Mast Pod
Rail Pod
ORDERING INFO
SPM-MAXI-C X10309 3 x ST70+ Maxi Instruments (Carbon)
SPM-3I-W A80106 3 x Std Instruments
SPM-4I-W A80149 4 x Std Instruments
SPM-2MAXI-W A80108 2 x ST70+ Maxi Instruments
SPM-MAXI-W A80109 3 x ST70+ Maxi Instruments
SPR-7-RM A80239 For a6 to e7 (Rail Mounted)
SPR-7-AM A80240 For a6 to e7 (Arm Mounted)
ScanstrutItem Code
RaymarineItem Code
Description
ORDERING INFO
ScanstrutItem Code
RaymarineItem Code
Description
ORDERING INFO
ScanstrutItem Code
RaymarineItem Code
Description
SPD-8D-W A80103 Up to 9” Displays
SPD-12D-W A80104 Up to 12” Displays
SPD-15D-W A80105 Up to 15” Displays
SPD-7-W-E7 A80185 For e7
SPD-8-W-E9 A80186 Pre-cut for e9 MFD
SPD-12-W-E12 A80187 Pre-cut for e12 MFD
SPD-4XI-W A80193 1 x e7 & 2 x i70
Options to installDesigned with options to install 7” displays or 1 standard instrument.
Arm Mounted
Extend the Pod away from narrow or crowded rails for better viewing. Designed to ensure the Pod is always positioned for best viewing whatever the angle of the rail. Cables are routed internally and accessed easily via a removable cover.
Rail Mounted
Fit your display onto standard and curved rails. Viewing angled can set upon installation. Cables are routed internally through clamp and into the rail.
Swivel & tilt baseOne handed quick release action. Simply release the lever, swivel and tilt to suit requirements before lockng back into position.
Best viewing angleAn adjustable ball joint allows range of movement and multiple mounting angles.
Added strengthAn inner bracing plate secures the Deck Pod base to the pod and gives increased rigidty to the assembly eliminating potential damage from shock and vibration.
Universal mountThe range has been designed to �t mast sizes from 76mm to 223mm. Mast arms pivot about semi circular washers and an additional cross-brace provides sti�ness preventing sideways movement.
Current sailboat designs often have very open cockpits with few options for installing retro-�t instruments. The new Arm and Rail Mount options allow smaller instruments and chartplotters to be rail mounted anywhere onboard.
Solve the challenge of �nding a level mounting surface to install your displays onto your powerboat, RIB or sailbot wheelhouse.
Using a one-handed quick release lever, simply release, swivel and tilt to suit your requirements before locking back into position.
Whether racing or cruising, our Mast Pods give you the best view of your instruments.
Mast arms pivot to provide a universal �t to a wide range of mast sizes. A cross-brace adds rigidity and prevents sideways movement of the pod.
•
•
•
•
•
Carb
on M
ast P
od
9
Scanpod
Helm Pod
INSTRUMENTS DISPLAYS
Great design and neat features ensure the Scanstrut Helm Pod is the perfect choice for all cockpit con�gurations.
Our unique ‘No-Drill’ clamping system provides a universal �t on any pedestal rail. A set of mounting saddles gives a secure, watertight �xture at the rear of the pod.
Universal helm �xingFits pedestal rails from 25mm to 33.7mm. Using a unique clamping system, the pod can �t rail widths from 178mm upwards.
No Drill �xing kitCustomised U-bolts �t around rail and through the saddles into the back of the pod eliminating the need for time consuming and awkward drilling of the stainless rail.
Secure & watertight installA saddle system supports the stainless tubing to allow a secure and rigid �t onto any pedestal and also ensures a watertight seal at cable entry.
8
The product of choice for leading boat builders World-
wide, the Scanpod range has gained an enviable reputation
for exceptional quality since its launch in 2009.
SPH-3I-W A80110 3 x Std Instruments
SPH-8D-W A80112 Up to 9” Displays
SPH-12D-W A80113 Up to 12” Displays
SPH-15D-W A80114 Up to 15” Displays
SPH-SYSTEM-W A80115 9” Display + 4 Std Instruments / 12” Display + 2 Std Instruments
SPH-8-W-E9 A80183 Pre-cut for e9 MFD
SPH-12-W-E12 A80184 Pre-cut for e12 MFD
SPH-4XI-W A80194 1 x e7 & 2 x i70
ORDERING INFO
ScanstrutItem Code
RaymarineItem Code
Description
•
•
•
• Single piece composite GRP moulding for high strength and corrosion resistance*.
• and antenna.
• and maintenance.
* Stainless steel mounts available to install larger KVH M9 & Intellian i9 antenna.
Satcom Antenna Mount
ORDERING INFO
SC35 X10021-SCA Fits 37STV
SC30 X10018-SCA Fits 33STV
Fits 45STVX10022-SCASC45R
SC65 X10023-SCA Fits 60STV
ScanstrutItem Code
RaymarineItem Code
Description
SATCOM/TV
Reduce the footprint size of your satcom antenna by up to 60% to give you greater choice when choosing where to install your satcom antenna.
Adjustable Base Wedge
Satcom antennas require a horizontal mounting surface to function correctly.
Satcom wedges eradicate this problem by providing a level mounting on slopes from 0° to 12°.
Simply counter rotate the angled discs until the top surface is horizontal.
TIP: Mounting on a curved arch? The Adjustable Base Wedge accessory will solve your problem and level your satcom installation.
7
ACCESSORIES AVAILABLE:
SC50 X10026-SCA Compatible with SC35, SC45R and SC65 only.
ScanstrutItem Code
RaymarineItem Code
Description
•
• Install up to 4 GPS/VHF antenna.
• Hollow wings and stem allow hidden cabling.
• Option available to mount additional 30cm/40cm satcom at the top of the mast.
Dual PowerTower
ORDERING INFO
DPT-SR1-30 X10014-SCA Radar* + 33STV/37STV
Radar* + 45STVX10015-SCADPT-SR1-40
DPT-S01-40 X10016-SCA Open array** + 45STV
ScanstrutItem Code
RaymarineItem Code
Description
ORDERING INFO
PTM-R1-1 A80147 Radar*
Radar* + 45STVA80148PTM-R1-S40
ScanstrutItem Code
RaymarineItem Code
Description
RADOMES OPEN ARRAY SATCOM/TV
Tapered Mast
Elevating the satcom antenna above the radar eliminates antenna interference and ensures maximum performance from both applications.
Single combination mount for multiple marine electronics. Each item is positioned for maximum performance.
Features an adjustable mounting plate to allow for variation in radome size.
Positions the radar as close as possible to the structural centre of gravity, ensuring minimal load is placed on the radar arch.
TIP: Ideal for smaller powerboats where mounting space is limited.
Compact Dual PowerTower
SATCOM/TVRADOMES
CAMERAS
GPS / VHF ANTENNA
LIGHTS
6
• Antenna fastens to PowerTower using own mounting bolts.
• Pre-drilled mounting holes for ease of installation.
• IP65 gland supplied to seal cable into stem for internal cable management.
• Watertight base seal included – no need for messy sealant.
*Compatible with RD418D / RD424D / RD418HD / RD424HD
**Compatible with RA1048D / RA3048HD / RA1048SHD / RA3048SHD
*Compatible with RD418D / RD424D / RD418HD / RD424HD
• Antenna fastens to PowerTower using own mounting bolts.
• Pre-drilled mounting holes for ease of installation.
• IP65 gland supplied to seal cable into stem for internal cable management.
• Watertight base seal included – no need for messy sealant.
Stronger for heavier equipment.
• White powder coated.
• 25° forward leaning (30° aft
leaning for open array).
• Choice of 130mm (5”) or 250mm (10”) heights.
Lightweight, suits any boat.
•
• 30° aft leaning.
• Choice of 150mm (6”) or 350mm (14”) heights.
Ideal for narrow RIB arches.
•
• 30° aft leaning.
• 150mm (6”) height.
PowerTower
ORDERING INFO
PT2001 X10012-SCA 350mm height | Composite
150mm height | CompositeX10013-SCAPT2004
SPT1001 A80121 150mm height | Stainless steel
130mm height | AluminiumA80122APT19000
ScanstrutItem Code
RaymarineItem Code
Description
RADOMES SATCOM/TV
Install your antenna on the cabin roof, flybridge or radar arch of your powerboat.
Aluminium Composite Stainless steel
Choice of material:
5
Nav Light and GPS / VHF Antenna Mount
Install Nav Light, GPS or VHF antennas above the radar for maximum visibility and performance.
Attach using radar mounting bolts, no extra fastenings required. (1” by 14 tpi thread)
ACCESSORIES AVAILABLE:
Compatible with RD418D / RD424D / RD418HD / RD424HDSC110 X10017-SCA For Nav Lights (Port mounted)
SC111 X10018-SCA For GPS / VHF Antenna (Starboard mounted)
SC112 X10019-SCA For GPS / VHF Antenna (Port mounted)
ScanstrutItem Code
RaymarineItem Code
Description
• 1.9m (6.4’) recommended for level deck mounting and 2.5m (8.3’) recommended for sloping transoms.
• Accommodates two cable channels with a cover strip to hold cables in place and out of view.
• Two support modules provide maximum fore / aft and sideways support.
• Unscrew base and remove pole for racing or winter storage, leaving just
Rail stand-o� Deck strut Adjustable base
SC100 Pole Mount
Nav Light and GPS / VHF Antenna Mount
Install Nav Light, GPS or VHF antennas above the radar for maximum visibility and performance.
Attach using radar mounting bolts, no extra fastenings required. (1” by 14 tpi thread)
ORDERING INFO
SC101 X10010-SCA 1.9m height SC100 Pole*
2.5m height SC100 Pole*X10011-SCASC102
4m Through Deck SC2 Pole**X10120-SCASC2-4
ScanstrutItem Code
RaymarineItem Code
Description
RADOMES SATCOM/TV
Versatile pole mount for deck or transom mounting. No customisation or adjustment required, it works straight from the box.
4
ACCESSORIES AVAILABLE:
*Compatible with RD418D / RD424D / RD418HD / RD424HD
**Compatible with RD418D / RD424D / RD418HD / RD424HD Use with SC45R for 45STV / with SC65 for 60STVSC110 X10017-SCA For Nav Lights (Port mounted)
SC111 X10018-SCA For GPS / VHF Antenna (Starboard mounted)
SC112 X10019-SCA For GPS / VHF Antenna (Port mounted)
ScanstrutItem Code
RaymarineItem Code
Description
• Attaches to mast with four swivel feet, matching a variety
•
•
• Safety wire kit independently attaches scanner to mast for additional protection.
Mast Mount
Radar Guard
Polished stainless guards protect radome from damage and reduce wear on the sails.
Mounted using radome bolts, no extra fastenings required.
ORDERING INFO
M92722 M92722 To �t RD418D / RD418HD
To �t RD424D / RD424HDM92698M92698
ScanstrutItem Code
RaymarineItem Code
Description
RADOMES SATCOM/TV
Still the first choice for boat owners Worldwide, Scanstrut leads the way with a new generation of Mast Mounts.
Stronger. Lighter. Easier to �t.
3
ACCESSORIES AVAILABLE:
SC27 X1006-SCA To �t M92722
ScanstrutItem Code
RaymarineItem Code
Description
• • Can be installed on both adjustable and split backstays.
• Options to mount radome fore or aft of backstay.
• 2.6m (8’6”) aluminium mounting pole – supplied in 2 lengths with hidden joiner piece.
• Can be deck, transom or chainplate mounted.
• Range of nylon bushes supplied. Clamps around backstay so cable tension can be adjusted.
Backstay Mounted Mast Mounted
•
TIP: When mounting radome forward of backstay, check clearance between radome and mainsail.
Self-Levelling Radar Mount
Beautifully styled and expertly engineered to ensure your radar stays level with the horizon at all times for optimum antenna performance.
As the boat heels or rolls, the radar is kept horizontal preventing target loss and giving the best possible radar picture.
Maintenance free & no power required.
Radome cradle with �ne tune adjustment for di�erent mast rake angles.
• Attaches to mast with four swivel feet, matching a variety of mast pro�les.
"Picture perfect radar performance."
As tested by
ACCESSORIES AVAILABLE:
GPS / VHF Antenna Mount for Self-Lev-elling Radar Mount
Single mount for installing an additional GPS / VHF antenna above the radar. (1” by 14 tpi thread)
ORDERING INFO
LMB-A1 X10002-SCA Backstay Mount (aft mounted radar)
LM-GPS A80117 For all Leveller models
Backstay Mount (fore mounted radar)
Mast Mount
X10001-SCA
X10000-SCA
LMB-F1
LMM-F1
All compatible with RD418D / RD424D / RD418HD / RD424HD
ScanstrutItem Code
RaymarineItem Code
Description
2
RADOMES
ScanstrutItem Code
RaymarineItem Code
Description
Self-Levelling Radar Mount
RADAR OPEN ARRAY
Raymarine Marine Electronics
Scanstrut Products SATCOM GPS ANTENNA DISPLAYS INSTRUMENTS CAMERAS PAGE
Mast Mount
SC100 Pole Mount
PowerTower
Dual PowerTower
Electrical Accessories
With over 25 years experience, make Scanstrut an essential part of your Raymarine electronics installa-tion.
Fully endorsed and recommended by Raymarine, a selection of the best-selling Scanstrut range is stocked centrally and available to order from Raymarine dealers worldwide.
We offer a range of products to install the following:
Visit www.scanstrut.com for further product information and technical specifications.
Marine Electronics Mounts
We o�er a standard range of over 100 di�erent installation products to mount your Raymarine radar, satcom, MFD displays, instruments, cameras and GPS antennas onto yachts, powerboats, commercial and military vessels.
Electrical Accessories
Electronics and seawater are not the best of friends and it’s essential that your installation remains dry inside.
The Scanstrut range of Electrical Accessories will ensure you complete your marine electronics install in the best way possible.
Scanstrut Accessories
A range of Accessories is available for your Scanstrut installation. From mounting an additional light or GPS Antenna, to accessories which aid installation and performance.
2
3
4
5
6
11
Scanpod 8/9 ROKK 10 Camera Mounts 10
Satcom Antenna Mount 7
Tapered Mast 6
Product Guide
PRODUCTGUIDE
2015
ORDERING INFO
DS16-P A80123 Connectors up to ø16mm | Cables 2-8mm
DS21A-P A80124 Connectors up to ø21mm | Cables 4-9mm
DS21B-P A80125 Connectors up to ø21mm | Cables 9-14mm
DS30-P A80126 Connectors up to ø30mm | Cables 9-14mm
DS-MULTI A80127 Multiple cables up to ø18mm
ScanstrutItem Code
RaymarineItem Code
Description
Electronics and seawater are not the best of friends and it’s essential that your installation remains dry inside.
The Scanstrut range of Electrical Accessories will ensure you complete your marine electronics install in the best way possible.
Electrical Accessories
Deck Seals
The only guaranteed and proven watertight installation for your antenna and navlight cables.
Pass cables into the boat, anywhere on deck. No need to remove cable plug.
Low pro�le shape for a stronger, impact resistant seal. No sharp edges to hit your foot on!
Supplied with blank and pre-drilled inner seals.
Split seal eliminates need to remove cable connectors during install.
Captive nuts in base provide easy assembly and allow reliable repeat installations.
Designed to �t multiple cables up to 15mm dia. Supplied with undrilled seal and made from marine grade aluminum with hard anodised �nish to resist impact marks.
WATERPROOF GUARANTEEIPX6 & IPX7 Tested & Approved.
Junction Box
The ‘�t and forget’ Junction Box range is the perfect sailing accessory for anyone planning boat maintenance, providing secure, IP66 watertight connections for marine electrical cables onboard any boat.
Choice of ‘standard’ box with 5 screw-down terminals or a ‘deluxe’ version which includes 10 fast-�t terminals for a quicker install.
Fit directly to chosen surface. A mounting bracket is included to allow easy removal for inspection.
Upgrade to IP67 with a Cable Seal upgrade kit.
Multi Deck Seal
11
•
•
•
•
•
•
•
ORDERING INFO
SB-8-5 A80129 Standard Junction Box | 5 screw down terminals
SB-8-10 A80130 Deluxe Junction Box | 10 fast �t terminals
SB-2G A80128 Cable Seal Pack (x2)
ScanstrutItem Code
RaymarineItem Code
Description
Visit www.scanstrut.com for further information.
Camera Mounts
ORDERING INFO
CAM-PT-150 A80119 PowerTower* - 150mm height
CAM-MM-01 A80118 Mast Mount*
PowerTower* - 300mm heightA80120CAM-PT-300
*Compatible with M-Series, T-Series & Navigator
ScanstrutItem Code
RaymarineItem Code
Description
CAMERAS
Options for installing Raymarine thermal imaging cameras onto your power or sail boat for maximum visibility at all times.
Compact Mast Mount for installation onto yacht masts.
Same great features as our standard Mast Mount range (see page X).
Camera Mast MountRaise your Camera from the deck to ensure clear visibility at all times. Designed with a 30° aft leaning profile and a small base footprint.
Camera PowerTower
ORDERING INFO
RL-RM-RYM A80295
ScanstrutItem Code
RaymarineItem Code
Description
A multi position mount for small electronic devices onboard.
Install fishfinders and chartplotters at the helm, RIB console, fishing boat dashboard , nav station and more.
ROKKINSTRUMENTS DISPLAYS
Adjustable Deck Mount
Designed to be versatile. Mount anywhere onboard.
‘Set and forget’ system ensures zero loss of clamping force over time.
Locking design provides a rock solid platform and a high clamping force with minimal e�ort from user.
Engineered to withstand high shock loading.
Corrosion resistant alloy castings, anodised and powder coated for extreme marine durability.
Easily adjusted. Unlock, reposition, lock again.
360° of rotation. 136° of tilt.
10
•
•
•
•
•
• Same great features as our standard PowerTower range (see page X).
•
RL-ARM-RYM
RL-ADM-RYM
A80294
A80293
All Rokk Mounts for a6, a7, e7 & Dragon�y
Compatability
rail mount
adjustable rail mountadjustable deck mount
Deck Pod
Mast Pod
Rail Pod
ORDERING INFO
SPM-MAXI-C X10309 3 x ST70+ Maxi Instruments (Carbon)
SPM-3I-W A80106 3 x Std Instruments
SPM-4I-W A80149 4 x Std Instruments
SPM-2MAXI-W A80108 2 x ST70+ Maxi Instruments
SPM-MAXI-W A80109 3 x ST70+ Maxi Instruments
SPR-7-RM A80239 For a6 to e7 (Rail Mounted)
SPR-7-AM A80240 For a6 to e7 (Arm Mounted)
ScanstrutItem Code
RaymarineItem Code
Description
ORDERING INFO
ScanstrutItem Code
RaymarineItem Code
Description
ORDERING INFO
ScanstrutItem Code
RaymarineItem Code
Description
SPD-8D-W A80103 Up to 9” Displays
SPD-12D-W A80104 Up to 12” Displays
SPD-15D-W A80105 Up to 15” Displays
SPD-7-W-E7 A80185 For e7
SPD-8-W-E9 A80186 Pre-cut for e9 MFD
SPD-12-W-E12 A80187 Pre-cut for e12 MFD
SPD-4XI-W A80193 1 x e7 & 2 x i70
Options to installDesigned with options to install 7” displays or 1 standard instrument.
Arm Mounted
Extend the Pod away from narrow or crowded rails for better viewing. Designed to ensure the Pod is always positioned for best viewing whatever the angle of the rail. Cables are routed internally and accessed easily via a removable cover.
Rail Mounted
Fit your display onto standard and curved rails. Viewing angled can set upon installation. Cables are routed internally through clamp and into the rail.
Swivel & tilt baseOne handed quick release action. Simply release the lever, swivel and tilt to suit requirements before lockng back into position.
Best viewing angleAn adjustable ball joint allows range of movement and multiple mounting angles.
Added strengthAn inner bracing plate secures the Deck Pod base to the pod and gives increased rigidty to the assembly eliminating potential damage from shock and vibration.
Universal mountThe range has been designed to �t mast sizes from 76mm to 223mm. Mast arms pivot about semi circular washers and an additional cross-brace provides sti�ness preventing sideways movement.
Current sailboat designs often have very open cockpits with few options for installing retro-�t instruments. The new Arm and Rail Mount options allow smaller instruments and chartplotters to be rail mounted anywhere onboard.
Solve the challenge of �nding a level mounting surface to install your displays onto your powerboat, RIB or sailbot wheelhouse.
Using a one-handed quick release lever, simply release, swivel and tilt to suit your requirements before locking back into position.
Whether racing or cruising, our Mast Pods give you the best view of your instruments.
Mast arms pivot to provide a universal �t to a wide range of mast sizes. A cross-brace adds rigidity and prevents sideways movement of the pod.
•
•
•
•
•
Carb
on M
ast P
od
9
Scanpod
Helm Pod
INSTRUMENTS DISPLAYS
Great design and neat features ensure the Scanstrut Helm Pod is the perfect choice for all cockpit con�gurations.
Our unique ‘No-Drill’ clamping system provides a universal �t on any pedestal rail. A set of mounting saddles gives a secure, watertight �xture at the rear of the pod.
Universal helm �xingFits pedestal rails from 25mm to 33.7mm. Using a unique clamping system, the pod can �t rail widths from 178mm upwards.
No Drill �xing kitCustomised U-bolts �t around rail and through the saddles into the back of the pod eliminating the need for time consuming and awkward drilling of the stainless rail.
Secure & watertight installA saddle system supports the stainless tubing to allow a secure and rigid �t onto any pedestal and also ensures a watertight seal at cable entry.
8
The product of choice for leading boat builders World-
wide, the Scanpod range has gained an enviable reputation
for exceptional quality since its launch in 2009.
SPH-3I-W A80110 3 x Std Instruments
SPH-8D-W A80112 Up to 9” Displays
SPH-12D-W A80113 Up to 12” Displays
SPH-15D-W A80114 Up to 15” Displays
SPH-SYSTEM-W A80115 9” Display + 4 Std Instruments / 12” Display + 2 Std Instruments
SPH-8-W-E9 A80183 Pre-cut for e9 MFD
SPH-12-W-E12 A80184 Pre-cut for e12 MFD
SPH-4XI-W A80194 1 x e7 & 2 x i70
ORDERING INFO
ScanstrutItem Code
RaymarineItem Code
Description
•
•
•
• Single piece composite GRP moulding for high strength and corrosion resistance*.
• and antenna.
• and maintenance.
* Stainless steel mounts available to install larger KVH M9 & Intellian i9 antenna.
Satcom Antenna Mount
ORDERING INFO
SC35 X10021-SCA Fits 37STV
SC30 X10018-SCA Fits 33STV
Fits 45STVX10022-SCASC45R
SC65 X10023-SCA Fits 60STV
ScanstrutItem Code
RaymarineItem Code
Description
SATCOM/TV
Reduce the footprint size of your satcom antenna by up to 60% to give you greater choice when choosing where to install your satcom antenna.
Adjustable Base Wedge
Satcom antennas require a horizontal mounting surface to function correctly.
Satcom wedges eradicate this problem by providing a level mounting on slopes from 0° to 12°.
Simply counter rotate the angled discs until the top surface is horizontal.
TIP: Mounting on a curved arch? The Adjustable Base Wedge accessory will solve your problem and level your satcom installation.
7
ACCESSORIES AVAILABLE:
SC50 X10026-SCA Compatible with SC35, SC45R and SC65 only.
ScanstrutItem Code
RaymarineItem Code
Description
•
• Install up to 4 GPS/VHF antenna.
• Hollow wings and stem allow hidden cabling.
• Option available to mount additional 30cm/40cm satcom at the top of the mast.
Dual PowerTower
ORDERING INFO
DPT-SR1-30 X10014-SCA Radar* + 33STV/37STV
Radar* + 45STVX10015-SCADPT-SR1-40
DPT-S01-40 X10016-SCA Open array** + 45STV
ScanstrutItem Code
RaymarineItem Code
Description
ORDERING INFO
PTM-R1-1 A80147 Radar*
Radar* + 45STVA80148PTM-R1-S40
ScanstrutItem Code
RaymarineItem Code
Description
RADOMES OPEN ARRAY SATCOM/TV
Tapered Mast
Elevating the satcom antenna above the radar eliminates antenna interference and ensures maximum performance from both applications.
Single combination mount for multiple marine electronics. Each item is positioned for maximum performance.
Features an adjustable mounting plate to allow for variation in radome size.
Positions the radar as close as possible to the structural centre of gravity, ensuring minimal load is placed on the radar arch.
TIP: Ideal for smaller powerboats where mounting space is limited.
Compact Dual PowerTower
SATCOM/TVRADOMES
CAMERAS
GPS / VHF ANTENNA
LIGHTS
6
• Antenna fastens to PowerTower using own mounting bolts.
• Pre-drilled mounting holes for ease of installation.
• IP65 gland supplied to seal cable into stem for internal cable management.
• Watertight base seal included – no need for messy sealant.
*Compatible with RD418D / RD424D / RD418HD / RD424HD
**Compatible with RA1048D / RA3048HD / RA1048SHD / RA3048SHD
*Compatible with RD418D / RD424D / RD418HD / RD424HD
• Antenna fastens to PowerTower using own mounting bolts.
• Pre-drilled mounting holes for ease of installation.
• IP65 gland supplied to seal cable into stem for internal cable management.
• Watertight base seal included – no need for messy sealant.
Stronger for heavier equipment.
• White powder coated.
• 25° forward leaning (30° aft
leaning for open array).
• Choice of 130mm (5”) or 250mm (10”) heights.
Lightweight, suits any boat.
•
• 30° aft leaning.
• Choice of 150mm (6”) or 350mm (14”) heights.
Ideal for narrow RIB arches.
•
• 30° aft leaning.
• 150mm (6”) height.
PowerTower
ORDERING INFO
PT2001 X10012-SCA 350mm height | Composite
150mm height | CompositeX10013-SCAPT2004
SPT1001 A80121 150mm height | Stainless steel
130mm height | AluminiumA80122APT19000
ScanstrutItem Code
RaymarineItem Code
Description
RADOMES SATCOM/TV
Install your antenna on the cabin roof, flybridge or radar arch of your powerboat.
Aluminium Composite Stainless steel
Choice of material:
5
Nav Light and GPS / VHF Antenna Mount
Install Nav Light, GPS or VHF antennas above the radar for maximum visibility and performance.
Attach using radar mounting bolts, no extra fastenings required. (1” by 14 tpi thread)
ACCESSORIES AVAILABLE:
Compatible with RD418D / RD424D / RD418HD / RD424HDSC110 X10017-SCA For Nav Lights (Port mounted)
SC111 X10018-SCA For GPS / VHF Antenna (Starboard mounted)
SC112 X10019-SCA For GPS / VHF Antenna (Port mounted)
ScanstrutItem Code
RaymarineItem Code
Description
• 1.9m (6.4’) recommended for level deck mounting and 2.5m (8.3’) recommended for sloping transoms.
• Accommodates two cable channels with a cover strip to hold cables in place and out of view.
• Two support modules provide maximum fore / aft and sideways support.
• Unscrew base and remove pole for racing or winter storage, leaving just
Rail stand-o� Deck strut Adjustable base
SC100 Pole Mount
Nav Light and GPS / VHF Antenna Mount
Install Nav Light, GPS or VHF antennas above the radar for maximum visibility and performance.
Attach using radar mounting bolts, no extra fastenings required. (1” by 14 tpi thread)
ORDERING INFO
SC101 X10010-SCA 1.9m height SC100 Pole*
2.5m height SC100 Pole*X10011-SCASC102
4m Through Deck SC2 Pole**X10120-SCASC2-4
ScanstrutItem Code
RaymarineItem Code
Description
RADOMES SATCOM/TV
Versatile pole mount for deck or transom mounting. No customisation or adjustment required, it works straight from the box.
4
ACCESSORIES AVAILABLE:
*Compatible with RD418D / RD424D / RD418HD / RD424HD
**Compatible with RD418D / RD424D / RD418HD / RD424HD Use with SC45R for 45STV / with SC65 for 60STVSC110 X10017-SCA For Nav Lights (Port mounted)
SC111 X10018-SCA For GPS / VHF Antenna (Starboard mounted)
SC112 X10019-SCA For GPS / VHF Antenna (Port mounted)
ScanstrutItem Code
RaymarineItem Code
Description
• Attaches to mast with four swivel feet, matching a variety
•
•
• Safety wire kit independently attaches scanner to mast for additional protection.
Mast Mount
Radar Guard
Polished stainless guards protect radome from damage and reduce wear on the sails.
Mounted using radome bolts, no extra fastenings required.
ORDERING INFO
M92722 M92722 To �t RD418D / RD418HD
To �t RD424D / RD424HDM92698M92698
ScanstrutItem Code
RaymarineItem Code
Description
RADOMES SATCOM/TV
Still the first choice for boat owners Worldwide, Scanstrut leads the way with a new generation of Mast Mounts.
Stronger. Lighter. Easier to �t.
3
ACCESSORIES AVAILABLE:
SC27 X1006-SCA To �t M92722
ScanstrutItem Code
RaymarineItem Code
Description
• • Can be installed on both adjustable and split backstays.
• Options to mount radome fore or aft of backstay.
• 2.6m (8’6”) aluminium mounting pole – supplied in 2 lengths with hidden joiner piece.
• Can be deck, transom or chainplate mounted.
• Range of nylon bushes supplied. Clamps around backstay so cable tension can be adjusted.
Backstay Mounted Mast Mounted
•
TIP: When mounting radome forward of backstay, check clearance between radome and mainsail.
Self-Levelling Radar Mount
Beautifully styled and expertly engineered to ensure your radar stays level with the horizon at all times for optimum antenna performance.
As the boat heels or rolls, the radar is kept horizontal preventing target loss and giving the best possible radar picture.
Maintenance free & no power required.
Radome cradle with �ne tune adjustment for di�erent mast rake angles.
• Attaches to mast with four swivel feet, matching a variety of mast pro�les.
"Picture perfect radar performance."
As tested by
ACCESSORIES AVAILABLE:
GPS / VHF Antenna Mount for Self-Lev-elling Radar Mount
Single mount for installing an additional GPS / VHF antenna above the radar. (1” by 14 tpi thread)
ORDERING INFO
LMB-A1 X10002-SCA Backstay Mount (aft mounted radar)
LM-GPS A80117 For all Leveller models
Backstay Mount (fore mounted radar)
Mast Mount
X10001-SCA
X10000-SCA
LMB-F1
LMM-F1
All compatible with RD418D / RD424D / RD418HD / RD424HD
ScanstrutItem Code
RaymarineItem Code
Description
2
RADOMES
ScanstrutItem Code
RaymarineItem Code
Description
Self-Levelling Radar Mount
RADAR OPEN ARRAY
Raymarine Marine Electronics
Scanstrut Products SATCOM GPS ANTENNA DISPLAYS INSTRUMENTS CAMERAS PAGE
Mast Mount
SC100 Pole Mount
PowerTower
Dual PowerTower
Electrical Accessories
With over 25 years experience, make Scanstrut an essential part of your Raymarine electronics installa-tion.
Fully endorsed and recommended by Raymarine, a selection of the best-selling Scanstrut range is stocked centrally and available to order from Raymarine dealers worldwide.
We offer a range of products to install the following:
Visit www.scanstrut.com for further product information and technical specifications.
Marine Electronics Mounts
We o�er a standard range of over 100 di�erent installation products to mount your Raymarine radar, satcom, MFD displays, instruments, cameras and GPS antennas onto yachts, powerboats, commercial and military vessels.
Electrical Accessories
Electronics and seawater are not the best of friends and it’s essential that your installation remains dry inside.
The Scanstrut range of Electrical Accessories will ensure you complete your marine electronics install in the best way possible.
Scanstrut Accessories
A range of Accessories is available for your Scanstrut installation. From mounting an additional light or GPS Antenna, to accessories which aid installation and performance.
2
3
4
5
6
11
Scanpod 8/9 ROKK 10 Camera Mounts 10
Satcom Antenna Mount 7
Tapered Mast 6
Product Guide
PRODUCTGUIDE
2015
ORDERING INFO
DS16-P A80123 Connectors up to ø16mm | Cables 2-8mm
DS21A-P A80124 Connectors up to ø21mm | Cables 4-9mm
DS21B-P A80125 Connectors up to ø21mm | Cables 9-14mm
DS30-P A80126 Connectors up to ø30mm | Cables 9-14mm
DS-MULTI A80127 Multiple cables up to ø18mm
ScanstrutItem Code
RaymarineItem Code
Description
Electronics and seawater are not the best of friends and it’s essential that your installation remains dry inside.
The Scanstrut range of Electrical Accessories will ensure you complete your marine electronics install in the best way possible.
Electrical Accessories
Deck Seals
The only guaranteed and proven watertight installation for your antenna and navlight cables.
Pass cables into the boat, anywhere on deck. No need to remove cable plug.
Low pro�le shape for a stronger, impact resistant seal. No sharp edges to hit your foot on!
Supplied with blank and pre-drilled inner seals.
Split seal eliminates need to remove cable connectors during install.
Captive nuts in base provide easy assembly and allow reliable repeat installations.
Designed to �t multiple cables up to 15mm dia. Supplied with undrilled seal and made from marine grade aluminum with hard anodised �nish to resist impact marks.
WATERPROOF GUARANTEEIPX6 & IPX7 Tested & Approved.
Junction Box
The ‘�t and forget’ Junction Box range is the perfect sailing accessory for anyone planning boat maintenance, providing secure, IP66 watertight connections for marine electrical cables onboard any boat.
Choice of ‘standard’ box with 5 screw-down terminals or a ‘deluxe’ version which includes 10 fast-�t terminals for a quicker install.
Fit directly to chosen surface. A mounting bracket is included to allow easy removal for inspection.
Upgrade to IP67 with a Cable Seal upgrade kit.
Multi Deck Seal
11
•
•
•
•
•
•
•
ORDERING INFO
SB-8-5 A80129 Standard Junction Box | 5 screw down terminals
SB-8-10 A80130 Deluxe Junction Box | 10 fast �t terminals
SB-2G A80128 Cable Seal Pack (x2)
ScanstrutItem Code
RaymarineItem Code
Description
Visit www.scanstrut.com for further information.
Camera Mounts
ORDERING INFO
CAM-PT-150 A80119 PowerTower* - 150mm height
CAM-MM-01 A80118 Mast Mount*
PowerTower* - 300mm heightA80120CAM-PT-300
*Compatible with M-Series, T-Series & Navigator
ScanstrutItem Code
RaymarineItem Code
Description
CAMERAS
Options for installing Raymarine thermal imaging cameras onto your power or sail boat for maximum visibility at all times.
Compact Mast Mount for installation onto yacht masts.
Same great features as our standard Mast Mount range (see page X).
Camera Mast MountRaise your Camera from the deck to ensure clear visibility at all times. Designed with a 30° aft leaning profile and a small base footprint.
Camera PowerTower
ORDERING INFO
RL-RM-RYM A80295
ScanstrutItem Code
RaymarineItem Code
Description
A multi position mount for small electronic devices onboard.
Install fishfinders and chartplotters at the helm, RIB console, fishing boat dashboard , nav station and more.
ROKKINSTRUMENTS DISPLAYS
Adjustable Deck Mount
Designed to be versatile. Mount anywhere onboard.
‘Set and forget’ system ensures zero loss of clamping force over time.
Locking design provides a rock solid platform and a high clamping force with minimal e�ort from user.
Engineered to withstand high shock loading.
Corrosion resistant alloy castings, anodised and powder coated for extreme marine durability.
Easily adjusted. Unlock, reposition, lock again.
360° of rotation. 136° of tilt.
10
•
•
•
•
•
• Same great features as our standard PowerTower range (see page X).
•
RL-ARM-RYM
RL-ADM-RYM
A80294
A80293
All Rokk Mounts for a6, a7, e7 & Dragon�y
Compatability
rail mount
adjustable rail mountadjustable deck mount
Deck Pod
Mast Pod
Rail Pod
ORDERING INFO
SPM-MAXI-C X10309 3 x ST70+ Maxi Instruments (Carbon)
SPM-3I-W A80106 3 x Std Instruments
SPM-4I-W A80149 4 x Std Instruments
SPM-2MAXI-W A80108 2 x ST70+ Maxi Instruments
SPM-MAXI-W A80109 3 x ST70+ Maxi Instruments
SPR-7-RM A80239 For a6 to e7 (Rail Mounted)
SPR-7-AM A80240 For a6 to e7 (Arm Mounted)
ScanstrutItem Code
RaymarineItem Code
Description
ORDERING INFO
ScanstrutItem Code
RaymarineItem Code
Description
ORDERING INFO
ScanstrutItem Code
RaymarineItem Code
Description
SPD-8D-W A80103 Up to 9” Displays
SPD-12D-W A80104 Up to 12” Displays
SPD-15D-W A80105 Up to 15” Displays
SPD-7-W-E7 A80185 For e7
SPD-8-W-E9 A80186 Pre-cut for e9 MFD
SPD-12-W-E12 A80187 Pre-cut for e12 MFD
SPD-4XI-W A80193 1 x e7 & 2 x i70
Options to installDesigned with options to install 7” displays or 1 standard instrument.
Arm Mounted
Extend the Pod away from narrow or crowded rails for better viewing. Designed to ensure the Pod is always positioned for best viewing whatever the angle of the rail. Cables are routed internally and accessed easily via a removable cover.
Rail Mounted
Fit your display onto standard and curved rails. Viewing angled can set upon installation. Cables are routed internally through clamp and into the rail.
Swivel & tilt baseOne handed quick release action. Simply release the lever, swivel and tilt to suit requirements before lockng back into position.
Best viewing angleAn adjustable ball joint allows range of movement and multiple mounting angles.
Added strengthAn inner bracing plate secures the Deck Pod base to the pod and gives increased rigidty to the assembly eliminating potential damage from shock and vibration.
Universal mountThe range has been designed to �t mast sizes from 76mm to 223mm. Mast arms pivot about semi circular washers and an additional cross-brace provides sti�ness preventing sideways movement.
Current sailboat designs often have very open cockpits with few options for installing retro-�t instruments. The new Arm and Rail Mount options allow smaller instruments and chartplotters to be rail mounted anywhere onboard.
Solve the challenge of �nding a level mounting surface to install your displays onto your powerboat, RIB or sailbot wheelhouse.
Using a one-handed quick release lever, simply release, swivel and tilt to suit your requirements before locking back into position.
Whether racing or cruising, our Mast Pods give you the best view of your instruments.
Mast arms pivot to provide a universal �t to a wide range of mast sizes. A cross-brace adds rigidity and prevents sideways movement of the pod.
•
•
•
•
•
Carb
on M
ast P
od
9
Scanpod
Helm Pod
INSTRUMENTS DISPLAYS
Great design and neat features ensure the Scanstrut Helm Pod is the perfect choice for all cockpit con�gurations.
Our unique ‘No-Drill’ clamping system provides a universal �t on any pedestal rail. A set of mounting saddles gives a secure, watertight �xture at the rear of the pod.
Universal helm �xingFits pedestal rails from 25mm to 33.7mm. Using a unique clamping system, the pod can �t rail widths from 178mm upwards.
No Drill �xing kitCustomised U-bolts �t around rail and through the saddles into the back of the pod eliminating the need for time consuming and awkward drilling of the stainless rail.
Secure & watertight installA saddle system supports the stainless tubing to allow a secure and rigid �t onto any pedestal and also ensures a watertight seal at cable entry.
8
The product of choice for leading boat builders World-
wide, the Scanpod range has gained an enviable reputation
for exceptional quality since its launch in 2009.
SPH-3I-W A80110 3 x Std Instruments
SPH-8D-W A80112 Up to 9” Displays
SPH-12D-W A80113 Up to 12” Displays
SPH-15D-W A80114 Up to 15” Displays
SPH-SYSTEM-W A80115 9” Display + 4 Std Instruments / 12” Display + 2 Std Instruments
SPH-8-W-E9 A80183 Pre-cut for e9 MFD
SPH-12-W-E12 A80184 Pre-cut for e12 MFD
SPH-4XI-W A80194 1 x e7 & 2 x i70
ORDERING INFO
ScanstrutItem Code
RaymarineItem Code
Description
•
•
•
• Single piece composite GRP moulding for high strength and corrosion resistance*.
• and antenna.
• and maintenance.
* Stainless steel mounts available to install larger KVH M9 & Intellian i9 antenna.
Satcom Antenna Mount
ORDERING INFO
SC35 X10021-SCA Fits 37STV
SC30 X10018-SCA Fits 33STV
Fits 45STVX10022-SCASC45R
SC65 X10023-SCA Fits 60STV
ScanstrutItem Code
RaymarineItem Code
Description
SATCOM/TV
Reduce the footprint size of your satcom antenna by up to 60% to give you greater choice when choosing where to install your satcom antenna.
Adjustable Base Wedge
Satcom antennas require a horizontal mounting surface to function correctly.
Satcom wedges eradicate this problem by providing a level mounting on slopes from 0° to 12°.
Simply counter rotate the angled discs until the top surface is horizontal.
TIP: Mounting on a curved arch? The Adjustable Base Wedge accessory will solve your problem and level your satcom installation.
7
ACCESSORIES AVAILABLE:
SC50 X10026-SCA Compatible with SC35, SC45R and SC65 only.
ScanstrutItem Code
RaymarineItem Code
Description
•
• Install up to 4 GPS/VHF antenna.
• Hollow wings and stem allow hidden cabling.
• Option available to mount additional 30cm/40cm satcom at the top of the mast.
Dual PowerTower
ORDERING INFO
DPT-SR1-30 X10014-SCA Radar* + 33STV/37STV
Radar* + 45STVX10015-SCADPT-SR1-40
DPT-S01-40 X10016-SCA Open array** + 45STV
ScanstrutItem Code
RaymarineItem Code
Description
ORDERING INFO
PTM-R1-1 A80147 Radar*
Radar* + 45STVA80148PTM-R1-S40
ScanstrutItem Code
RaymarineItem Code
Description
RADOMES OPEN ARRAY SATCOM/TV
Tapered Mast
Elevating the satcom antenna above the radar eliminates antenna interference and ensures maximum performance from both applications.
Single combination mount for multiple marine electronics. Each item is positioned for maximum performance.
Features an adjustable mounting plate to allow for variation in radome size.
Positions the radar as close as possible to the structural centre of gravity, ensuring minimal load is placed on the radar arch.
TIP: Ideal for smaller powerboats where mounting space is limited.
Compact Dual PowerTower
SATCOM/TVRADOMES
CAMERAS
GPS / VHF ANTENNA
LIGHTS
6
• Antenna fastens to PowerTower using own mounting bolts.
• Pre-drilled mounting holes for ease of installation.
• IP65 gland supplied to seal cable into stem for internal cable management.
• Watertight base seal included – no need for messy sealant.
*Compatible with RD418D / RD424D / RD418HD / RD424HD
**Compatible with RA1048D / RA3048HD / RA1048SHD / RA3048SHD
*Compatible with RD418D / RD424D / RD418HD / RD424HD
• Antenna fastens to PowerTower using own mounting bolts.
• Pre-drilled mounting holes for ease of installation.
• IP65 gland supplied to seal cable into stem for internal cable management.
• Watertight base seal included – no need for messy sealant.
Stronger for heavier equipment.
• White powder coated.
• 25° forward leaning (30° aft
leaning for open array).
• Choice of 130mm (5”) or 250mm (10”) heights.
Lightweight, suits any boat.
•
• 30° aft leaning.
• Choice of 150mm (6”) or 350mm (14”) heights.
Ideal for narrow RIB arches.
•
• 30° aft leaning.
• 150mm (6”) height.
PowerTower
ORDERING INFO
PT2001 X10012-SCA 350mm height | Composite
150mm height | CompositeX10013-SCAPT2004
SPT1001 A80121 150mm height | Stainless steel
130mm height | AluminiumA80122APT19000
ScanstrutItem Code
RaymarineItem Code
Description
RADOMES SATCOM/TV
Install your antenna on the cabin roof, flybridge or radar arch of your powerboat.
Aluminium Composite Stainless steel
Choice of material:
5
Nav Light and GPS / VHF Antenna Mount
Install Nav Light, GPS or VHF antennas above the radar for maximum visibility and performance.
Attach using radar mounting bolts, no extra fastenings required. (1” by 14 tpi thread)
ACCESSORIES AVAILABLE:
Compatible with RD418D / RD424D / RD418HD / RD424HDSC110 X10017-SCA For Nav Lights (Port mounted)
SC111 X10018-SCA For GPS / VHF Antenna (Starboard mounted)
SC112 X10019-SCA For GPS / VHF Antenna (Port mounted)
ScanstrutItem Code
RaymarineItem Code
Description
• 1.9m (6.4’) recommended for level deck mounting and 2.5m (8.3’) recommended for sloping transoms.
• Accommodates two cable channels with a cover strip to hold cables in place and out of view.
• Two support modules provide maximum fore / aft and sideways support.
• Unscrew base and remove pole for racing or winter storage, leaving just
Rail stand-o� Deck strut Adjustable base
SC100 Pole Mount
Nav Light and GPS / VHF Antenna Mount
Install Nav Light, GPS or VHF antennas above the radar for maximum visibility and performance.
Attach using radar mounting bolts, no extra fastenings required. (1” by 14 tpi thread)
ORDERING INFO
SC101 X10010-SCA 1.9m height SC100 Pole*
2.5m height SC100 Pole*X10011-SCASC102
4m Through Deck SC2 Pole**X10120-SCASC2-4
ScanstrutItem Code
RaymarineItem Code
Description
RADOMES SATCOM/TV
Versatile pole mount for deck or transom mounting. No customisation or adjustment required, it works straight from the box.
4
ACCESSORIES AVAILABLE:
*Compatible with RD418D / RD424D / RD418HD / RD424HD
**Compatible with RD418D / RD424D / RD418HD / RD424HD Use with SC45R for 45STV / with SC65 for 60STVSC110 X10017-SCA For Nav Lights (Port mounted)
SC111 X10018-SCA For GPS / VHF Antenna (Starboard mounted)
SC112 X10019-SCA For GPS / VHF Antenna (Port mounted)
ScanstrutItem Code
RaymarineItem Code
Description
• Attaches to mast with four swivel feet, matching a variety
•
•
• Safety wire kit independently attaches scanner to mast for additional protection.
Mast Mount
Radar Guard
Polished stainless guards protect radome from damage and reduce wear on the sails.
Mounted using radome bolts, no extra fastenings required.
ORDERING INFO
M92722 M92722 To �t RD418D / RD418HD
To �t RD424D / RD424HDM92698M92698
ScanstrutItem Code
RaymarineItem Code
Description
RADOMES SATCOM/TV
Still the first choice for boat owners Worldwide, Scanstrut leads the way with a new generation of Mast Mounts.
Stronger. Lighter. Easier to �t.
3
ACCESSORIES AVAILABLE:
SC27 X1006-SCA To �t M92722
ScanstrutItem Code
RaymarineItem Code
Description
• • Can be installed on both adjustable and split backstays.
• Options to mount radome fore or aft of backstay.
• 2.6m (8’6”) aluminium mounting pole – supplied in 2 lengths with hidden joiner piece.
• Can be deck, transom or chainplate mounted.
• Range of nylon bushes supplied. Clamps around backstay so cable tension can be adjusted.
Backstay Mounted Mast Mounted
•
TIP: When mounting radome forward of backstay, check clearance between radome and mainsail.
Self-Levelling Radar Mount
Beautifully styled and expertly engineered to ensure your radar stays level with the horizon at all times for optimum antenna performance.
As the boat heels or rolls, the radar is kept horizontal preventing target loss and giving the best possible radar picture.
Maintenance free & no power required.
Radome cradle with �ne tune adjustment for di�erent mast rake angles.
• Attaches to mast with four swivel feet, matching a variety of mast pro�les.
"Picture perfect radar performance."
As tested by
ACCESSORIES AVAILABLE:
GPS / VHF Antenna Mount for Self-Lev-elling Radar Mount
Single mount for installing an additional GPS / VHF antenna above the radar. (1” by 14 tpi thread)
ORDERING INFO
LMB-A1 X10002-SCA Backstay Mount (aft mounted radar)
LM-GPS A80117 For all Leveller models
Backstay Mount (fore mounted radar)
Mast Mount
X10001-SCA
X10000-SCA
LMB-F1
LMM-F1
All compatible with RD418D / RD424D / RD418HD / RD424HD
ScanstrutItem Code
RaymarineItem Code
Description
2
RADOMES
ScanstrutItem Code
RaymarineItem Code
Description
Self-Levelling Radar Mount
RADAR OPEN ARRAY
Raymarine Marine Electronics
Scanstrut Products SATCOM GPS ANTENNA DISPLAYS INSTRUMENTS CAMERAS PAGE
Mast Mount
SC100 Pole Mount
PowerTower
Dual PowerTower
Electrical Accessories
With over 25 years experience, make Scanstrut an essential part of your Raymarine electronics installa-tion.
Fully endorsed and recommended by Raymarine, a selection of the best-selling Scanstrut range is stocked centrally and available to order from Raymarine dealers worldwide.
We offer a range of products to install the following:
Visit www.scanstrut.com for further product information and technical specifications.
Marine Electronics Mounts
We o�er a standard range of over 100 di�erent installation products to mount your Raymarine radar, satcom, MFD displays, instruments, cameras and GPS antennas onto yachts, powerboats, commercial and military vessels.
Electrical Accessories
Electronics and seawater are not the best of friends and it’s essential that your installation remains dry inside.
The Scanstrut range of Electrical Accessories will ensure you complete your marine electronics install in the best way possible.
Scanstrut Accessories
A range of Accessories is available for your Scanstrut installation. From mounting an additional light or GPS Antenna, to accessories which aid installation and performance.
2
3
4
5
6
11
Scanpod 8/9 ROKK 10 Camera Mounts 10
Satcom Antenna Mount 7
Tapered Mast 6
Product Guide
PRODUCTGUIDE
2015
ORDERING INFO
DS16-P A80123 Connectors up to ø16mm | Cables 2-8mm
DS21A-P A80124 Connectors up to ø21mm | Cables 4-9mm
DS21B-P A80125 Connectors up to ø21mm | Cables 9-14mm
DS30-P A80126 Connectors up to ø30mm | Cables 9-14mm
DS-MULTI A80127 Multiple cables up to ø18mm
ScanstrutItem Code
RaymarineItem Code
Description
Electronics and seawater are not the best of friends and it’s essential that your installation remains dry inside.
The Scanstrut range of Electrical Accessories will ensure you complete your marine electronics install in the best way possible.
Electrical Accessories
Deck Seals
The only guaranteed and proven watertight installation for your antenna and navlight cables.
Pass cables into the boat, anywhere on deck. No need to remove cable plug.
Low pro�le shape for a stronger, impact resistant seal. No sharp edges to hit your foot on!
Supplied with blank and pre-drilled inner seals.
Split seal eliminates need to remove cable connectors during install.
Captive nuts in base provide easy assembly and allow reliable repeat installations.
Designed to �t multiple cables up to 15mm dia. Supplied with undrilled seal and made from marine grade aluminum with hard anodised �nish to resist impact marks.
WATERPROOF GUARANTEEIPX6 & IPX7 Tested & Approved.
Junction Box
The ‘�t and forget’ Junction Box range is the perfect sailing accessory for anyone planning boat maintenance, providing secure, IP66 watertight connections for marine electrical cables onboard any boat.
Choice of ‘standard’ box with 5 screw-down terminals or a ‘deluxe’ version which includes 10 fast-�t terminals for a quicker install.
Fit directly to chosen surface. A mounting bracket is included to allow easy removal for inspection.
Upgrade to IP67 with a Cable Seal upgrade kit.
Multi Deck Seal
11
•
•
•
•
•
•
•
ORDERING INFO
SB-8-5 A80129 Standard Junction Box | 5 screw down terminals
SB-8-10 A80130 Deluxe Junction Box | 10 fast �t terminals
SB-2G A80128 Cable Seal Pack (x2)
ScanstrutItem Code
RaymarineItem Code
Description
Visit www.scanstrut.com for further information.
Camera Mounts
ORDERING INFO
CAM-PT-150 A80119 PowerTower* - 150mm height
CAM-MM-01 A80118 Mast Mount*
PowerTower* - 300mm heightA80120CAM-PT-300
*Compatible with M-Series, T-Series & Navigator
ScanstrutItem Code
RaymarineItem Code
Description
CAMERAS
Options for installing Raymarine thermal imaging cameras onto your power or sail boat for maximum visibility at all times.
Compact Mast Mount for installation onto yacht masts.
Same great features as our standard Mast Mount range (see page X).
Camera Mast MountRaise your Camera from the deck to ensure clear visibility at all times. Designed with a 30° aft leaning profile and a small base footprint.
Camera PowerTower
ORDERING INFO
RL-RM-RYM A80295
ScanstrutItem Code
RaymarineItem Code
Description
A multi position mount for small electronic devices onboard.
Install fishfinders and chartplotters at the helm, RIB console, fishing boat dashboard , nav station and more.
ROKKINSTRUMENTS DISPLAYS
Adjustable Deck Mount
Designed to be versatile. Mount anywhere onboard.
‘Set and forget’ system ensures zero loss of clamping force over time.
Locking design provides a rock solid platform and a high clamping force with minimal e�ort from user.
Engineered to withstand high shock loading.
Corrosion resistant alloy castings, anodised and powder coated for extreme marine durability.
Easily adjusted. Unlock, reposition, lock again.
360° of rotation. 136° of tilt.
10
•
•
•
•
•
• Same great features as our standard PowerTower range (see page X).
•
RL-ARM-RYM
RL-ADM-RYM
A80294
A80293
All Rokk Mounts for a6, a7, e7 & Dragon�y
Compatability
rail mount
adjustable rail mountadjustable deck mount
Deck Pod
Mast Pod
Rail Pod
ORDERING INFO
SPM-MAXI-C X10309 3 x ST70+ Maxi Instruments (Carbon)
SPM-3I-W A80106 3 x Std Instruments
SPM-4I-W A80149 4 x Std Instruments
SPM-2MAXI-W A80108 2 x ST70+ Maxi Instruments
SPM-MAXI-W A80109 3 x ST70+ Maxi Instruments
SPR-7-RM A80239 For a6 to e7 (Rail Mounted)
SPR-7-AM A80240 For a6 to e7 (Arm Mounted)
ScanstrutItem Code
RaymarineItem Code
Description
ORDERING INFO
ScanstrutItem Code
RaymarineItem Code
Description
ORDERING INFO
ScanstrutItem Code
RaymarineItem Code
Description
SPD-8D-W A80103 Up to 9” Displays
SPD-12D-W A80104 Up to 12” Displays
SPD-15D-W A80105 Up to 15” Displays
SPD-7-W-E7 A80185 For e7
SPD-8-W-E9 A80186 Pre-cut for e9 MFD
SPD-12-W-E12 A80187 Pre-cut for e12 MFD
SPD-4XI-W A80193 1 x e7 & 2 x i70
Options to installDesigned with options to install 7” displays or 1 standard instrument.
Arm Mounted
Extend the Pod away from narrow or crowded rails for better viewing. Designed to ensure the Pod is always positioned for best viewing whatever the angle of the rail. Cables are routed internally and accessed easily via a removable cover.
Rail Mounted
Fit your display onto standard and curved rails. Viewing angled can set upon installation. Cables are routed internally through clamp and into the rail.
Swivel & tilt baseOne handed quick release action. Simply release the lever, swivel and tilt to suit requirements before lockng back into position.
Best viewing angleAn adjustable ball joint allows range of movement and multiple mounting angles.
Added strengthAn inner bracing plate secures the Deck Pod base to the pod and gives increased rigidty to the assembly eliminating potential damage from shock and vibration.
Universal mountThe range has been designed to �t mast sizes from 76mm to 223mm. Mast arms pivot about semi circular washers and an additional cross-brace provides sti�ness preventing sideways movement.
Current sailboat designs often have very open cockpits with few options for installing retro-�t instruments. The new Arm and Rail Mount options allow smaller instruments and chartplotters to be rail mounted anywhere onboard.
Solve the challenge of �nding a level mounting surface to install your displays onto your powerboat, RIB or sailbot wheelhouse.
Using a one-handed quick release lever, simply release, swivel and tilt to suit your requirements before locking back into position.
Whether racing or cruising, our Mast Pods give you the best view of your instruments.
Mast arms pivot to provide a universal �t to a wide range of mast sizes. A cross-brace adds rigidity and prevents sideways movement of the pod.
•
•
•
•
•
Carb
on M
ast P
od
9
Scanpod
Helm Pod
INSTRUMENTS DISPLAYS
Great design and neat features ensure the Scanstrut Helm Pod is the perfect choice for all cockpit con�gurations.
Our unique ‘No-Drill’ clamping system provides a universal �t on any pedestal rail. A set of mounting saddles gives a secure, watertight �xture at the rear of the pod.
Universal helm �xingFits pedestal rails from 25mm to 33.7mm. Using a unique clamping system, the pod can �t rail widths from 178mm upwards.
No Drill �xing kitCustomised U-bolts �t around rail and through the saddles into the back of the pod eliminating the need for time consuming and awkward drilling of the stainless rail.
Secure & watertight installA saddle system supports the stainless tubing to allow a secure and rigid �t onto any pedestal and also ensures a watertight seal at cable entry.
8
The product of choice for leading boat builders World-
wide, the Scanpod range has gained an enviable reputation
for exceptional quality since its launch in 2009.
SPH-3I-W A80110 3 x Std Instruments
SPH-8D-W A80112 Up to 9” Displays
SPH-12D-W A80113 Up to 12” Displays
SPH-15D-W A80114 Up to 15” Displays
SPH-SYSTEM-W A80115 9” Display + 4 Std Instruments / 12” Display + 2 Std Instruments
SPH-8-W-E9 A80183 Pre-cut for e9 MFD
SPH-12-W-E12 A80184 Pre-cut for e12 MFD
SPH-4XI-W A80194 1 x e7 & 2 x i70
ORDERING INFO
ScanstrutItem Code
RaymarineItem Code
Description
•
•
•
• Single piece composite GRP moulding for high strength and corrosion resistance*.
• and antenna.
• and maintenance.
* Stainless steel mounts available to install larger KVH M9 & Intellian i9 antenna.
Satcom Antenna Mount
ORDERING INFO
SC35 X10021-SCA Fits 37STV
SC30 X10018-SCA Fits 33STV
Fits 45STVX10022-SCASC45R
SC65 X10023-SCA Fits 60STV
ScanstrutItem Code
RaymarineItem Code
Description
SATCOM/TV
Reduce the footprint size of your satcom antenna by up to 60% to give you greater choice when choosing where to install your satcom antenna.
Adjustable Base Wedge
Satcom antennas require a horizontal mounting surface to function correctly.
Satcom wedges eradicate this problem by providing a level mounting on slopes from 0° to 12°.
Simply counter rotate the angled discs until the top surface is horizontal.
TIP: Mounting on a curved arch? The Adjustable Base Wedge accessory will solve your problem and level your satcom installation.
7
ACCESSORIES AVAILABLE:
SC50 X10026-SCA Compatible with SC35, SC45R and SC65 only.
ScanstrutItem Code
RaymarineItem Code
Description
•
• Install up to 4 GPS/VHF antenna.
• Hollow wings and stem allow hidden cabling.
• Option available to mount additional 30cm/40cm satcom at the top of the mast.
Dual PowerTower
ORDERING INFO
DPT-SR1-30 X10014-SCA Radar* + 33STV/37STV
Radar* + 45STVX10015-SCADPT-SR1-40
DPT-S01-40 X10016-SCA Open array** + 45STV
ScanstrutItem Code
RaymarineItem Code
Description
ORDERING INFO
PTM-R1-1 A80147 Radar*
Radar* + 45STVA80148PTM-R1-S40
ScanstrutItem Code
RaymarineItem Code
Description
RADOMES OPEN ARRAY SATCOM/TV
Tapered Mast
Elevating the satcom antenna above the radar eliminates antenna interference and ensures maximum performance from both applications.
Single combination mount for multiple marine electronics. Each item is positioned for maximum performance.
Features an adjustable mounting plate to allow for variation in radome size.
Positions the radar as close as possible to the structural centre of gravity, ensuring minimal load is placed on the radar arch.
TIP: Ideal for smaller powerboats where mounting space is limited.
Compact Dual PowerTower
SATCOM/TVRADOMES
CAMERAS
GPS / VHF ANTENNA
LIGHTS
6
• Antenna fastens to PowerTower using own mounting bolts.
• Pre-drilled mounting holes for ease of installation.
• IP65 gland supplied to seal cable into stem for internal cable management.
• Watertight base seal included – no need for messy sealant.
*Compatible with RD418D / RD424D / RD418HD / RD424HD
**Compatible with RA1048D / RA3048HD / RA1048SHD / RA3048SHD
*Compatible with RD418D / RD424D / RD418HD / RD424HD
• Antenna fastens to PowerTower using own mounting bolts.
• Pre-drilled mounting holes for ease of installation.
• IP65 gland supplied to seal cable into stem for internal cable management.
• Watertight base seal included – no need for messy sealant.
Stronger for heavier equipment.
• White powder coated.
• 25° forward leaning (30° aft
leaning for open array).
• Choice of 130mm (5”) or 250mm (10”) heights.
Lightweight, suits any boat.
•
• 30° aft leaning.
• Choice of 150mm (6”) or 350mm (14”) heights.
Ideal for narrow RIB arches.
•
• 30° aft leaning.
• 150mm (6”) height.
PowerTower
ORDERING INFO
PT2001 X10012-SCA 350mm height | Composite
150mm height | CompositeX10013-SCAPT2004
SPT1001 A80121 150mm height | Stainless steel
130mm height | AluminiumA80122APT19000
ScanstrutItem Code
RaymarineItem Code
Description
RADOMES SATCOM/TV
Install your antenna on the cabin roof, flybridge or radar arch of your powerboat.
Aluminium Composite Stainless steel
Choice of material:
5
Nav Light and GPS / VHF Antenna Mount
Install Nav Light, GPS or VHF antennas above the radar for maximum visibility and performance.
Attach using radar mounting bolts, no extra fastenings required. (1” by 14 tpi thread)
ACCESSORIES AVAILABLE:
Compatible with RD418D / RD424D / RD418HD / RD424HDSC110 X10017-SCA For Nav Lights (Port mounted)
SC111 X10018-SCA For GPS / VHF Antenna (Starboard mounted)
SC112 X10019-SCA For GPS / VHF Antenna (Port mounted)
ScanstrutItem Code
RaymarineItem Code
Description
• 1.9m (6.4’) recommended for level deck mounting and 2.5m (8.3’) recommended for sloping transoms.
• Accommodates two cable channels with a cover strip to hold cables in place and out of view.
• Two support modules provide maximum fore / aft and sideways support.
• Unscrew base and remove pole for racing or winter storage, leaving just
Rail stand-o� Deck strut Adjustable base
SC100 Pole Mount
Nav Light and GPS / VHF Antenna Mount
Install Nav Light, GPS or VHF antennas above the radar for maximum visibility and performance.
Attach using radar mounting bolts, no extra fastenings required. (1” by 14 tpi thread)
ORDERING INFO
SC101 X10010-SCA 1.9m height SC100 Pole*
2.5m height SC100 Pole*X10011-SCASC102
4m Through Deck SC2 Pole**X10120-SCASC2-4
ScanstrutItem Code
RaymarineItem Code
Description
RADOMES SATCOM/TV
Versatile pole mount for deck or transom mounting. No customisation or adjustment required, it works straight from the box.
4
ACCESSORIES AVAILABLE:
*Compatible with RD418D / RD424D / RD418HD / RD424HD
**Compatible with RD418D / RD424D / RD418HD / RD424HD Use with SC45R for 45STV / with SC65 for 60STVSC110 X10017-SCA For Nav Lights (Port mounted)
SC111 X10018-SCA For GPS / VHF Antenna (Starboard mounted)
SC112 X10019-SCA For GPS / VHF Antenna (Port mounted)
ScanstrutItem Code
RaymarineItem Code
Description
• Attaches to mast with four swivel feet, matching a variety
•
•
• Safety wire kit independently attaches scanner to mast for additional protection.
Mast Mount
Radar Guard
Polished stainless guards protect radome from damage and reduce wear on the sails.
Mounted using radome bolts, no extra fastenings required.
ORDERING INFO
M92722 M92722 To �t RD418D / RD418HD
To �t RD424D / RD424HDM92698M92698
ScanstrutItem Code
RaymarineItem Code
Description
RADOMES SATCOM/TV
Still the first choice for boat owners Worldwide, Scanstrut leads the way with a new generation of Mast Mounts.
Stronger. Lighter. Easier to �t.
3
ACCESSORIES AVAILABLE:
SC27 X1006-SCA To �t M92722
ScanstrutItem Code
RaymarineItem Code
Description
• • Can be installed on both adjustable and split backstays.
• Options to mount radome fore or aft of backstay.
• 2.6m (8’6”) aluminium mounting pole – supplied in 2 lengths with hidden joiner piece.
• Can be deck, transom or chainplate mounted.
• Range of nylon bushes supplied. Clamps around backstay so cable tension can be adjusted.
Backstay Mounted Mast Mounted
•
TIP: When mounting radome forward of backstay, check clearance between radome and mainsail.
Self-Levelling Radar Mount
Beautifully styled and expertly engineered to ensure your radar stays level with the horizon at all times for optimum antenna performance.
As the boat heels or rolls, the radar is kept horizontal preventing target loss and giving the best possible radar picture.
Maintenance free & no power required.
Radome cradle with �ne tune adjustment for di�erent mast rake angles.
• Attaches to mast with four swivel feet, matching a variety of mast pro�les.
"Picture perfect radar performance."
As tested by
ACCESSORIES AVAILABLE:
GPS / VHF Antenna Mount for Self-Lev-elling Radar Mount
Single mount for installing an additional GPS / VHF antenna above the radar. (1” by 14 tpi thread)
ORDERING INFO
LMB-A1 X10002-SCA Backstay Mount (aft mounted radar)
LM-GPS A80117 For all Leveller models
Backstay Mount (fore mounted radar)
Mast Mount
X10001-SCA
X10000-SCA
LMB-F1
LMM-F1
All compatible with RD418D / RD424D / RD418HD / RD424HD
ScanstrutItem Code
RaymarineItem Code
Description
2
RADOMES
ScanstrutItem Code
RaymarineItem Code
Description
Self-Levelling Radar Mount
RADAR OPEN ARRAY
Raymarine Marine Electronics
Scanstrut Products SATCOM GPS ANTENNA DISPLAYS INSTRUMENTS CAMERAS PAGE
Mast Mount
SC100 Pole Mount
PowerTower
Dual PowerTower
Electrical Accessories
With over 25 years experience, make Scanstrut an essential part of your Raymarine electronics installa-tion.
Fully endorsed and recommended by Raymarine, a selection of the best-selling Scanstrut range is stocked centrally and available to order from Raymarine dealers worldwide.
We offer a range of products to install the following:
Visit www.scanstrut.com for further product information and technical specifications.
Marine Electronics Mounts
We o�er a standard range of over 100 di�erent installation products to mount your Raymarine radar, satcom, MFD displays, instruments, cameras and GPS antennas onto yachts, powerboats, commercial and military vessels.
Electrical Accessories
Electronics and seawater are not the best of friends and it’s essential that your installation remains dry inside.
The Scanstrut range of Electrical Accessories will ensure you complete your marine electronics install in the best way possible.
Scanstrut Accessories
A range of Accessories is available for your Scanstrut installation. From mounting an additional light or GPS Antenna, to accessories which aid installation and performance.
2
3
4
5
6
11
Scanpod 8/9 ROKK 10 Camera Mounts 10
Satcom Antenna Mount 7
Tapered Mast 6
Product Guide
PRODUCTGUIDE
2015
ORDERING INFO
DS16-P A80123 Connectors up to ø16mm | Cables 2-8mm
DS21A-P A80124 Connectors up to ø21mm | Cables 4-9mm
DS21B-P A80125 Connectors up to ø21mm | Cables 9-14mm
DS30-P A80126 Connectors up to ø30mm | Cables 9-14mm
DS-MULTI A80127 Multiple cables up to ø18mm
ScanstrutItem Code
RaymarineItem Code
Description
Electronics and seawater are not the best of friends and it’s essential that your installation remains dry inside.
The Scanstrut range of Electrical Accessories will ensure you complete your marine electronics install in the best way possible.
Electrical Accessories
Deck Seals
The only guaranteed and proven watertight installation for your antenna and navlight cables.
Pass cables into the boat, anywhere on deck. No need to remove cable plug.
Low pro�le shape for a stronger, impact resistant seal. No sharp edges to hit your foot on!
Supplied with blank and pre-drilled inner seals.
Split seal eliminates need to remove cable connectors during install.
Captive nuts in base provide easy assembly and allow reliable repeat installations.
Designed to �t multiple cables up to 15mm dia. Supplied with undrilled seal and made from marine grade aluminum with hard anodised �nish to resist impact marks.
WATERPROOF GUARANTEEIPX6 & IPX7 Tested & Approved.
Junction Box
The ‘�t and forget’ Junction Box range is the perfect sailing accessory for anyone planning boat maintenance, providing secure, IP66 watertight connections for marine electrical cables onboard any boat.
Choice of ‘standard’ box with 5 screw-down terminals or a ‘deluxe’ version which includes 10 fast-�t terminals for a quicker install.
Fit directly to chosen surface. A mounting bracket is included to allow easy removal for inspection.
Upgrade to IP67 with a Cable Seal upgrade kit.
Multi Deck Seal
11
•
•
•
•
•
•
•
ORDERING INFO
SB-8-5 A80129 Standard Junction Box | 5 screw down terminals
SB-8-10 A80130 Deluxe Junction Box | 10 fast �t terminals
SB-2G A80128 Cable Seal Pack (x2)
ScanstrutItem Code
RaymarineItem Code
Description
Visit www.scanstrut.com for further information.
Camera Mounts
ORDERING INFO
CAM-PT-150 A80119 PowerTower* - 150mm height
CAM-MM-01 A80118 Mast Mount*
PowerTower* - 300mm heightA80120CAM-PT-300
*Compatible with M-Series, T-Series & Navigator
ScanstrutItem Code
RaymarineItem Code
Description
CAMERAS
Options for installing Raymarine thermal imaging cameras onto your power or sail boat for maximum visibility at all times.
Compact Mast Mount for installation onto yacht masts.
Same great features as our standard Mast Mount range (see page X).
Camera Mast MountRaise your Camera from the deck to ensure clear visibility at all times. Designed with a 30° aft leaning profile and a small base footprint.
Camera PowerTower
ORDERING INFO
RL-RM-RYM A80295
ScanstrutItem Code
RaymarineItem Code
Description
A multi position mount for small electronic devices onboard.
Install fishfinders and chartplotters at the helm, RIB console, fishing boat dashboard , nav station and more.
ROKKINSTRUMENTS DISPLAYS
Adjustable Deck Mount
Designed to be versatile. Mount anywhere onboard.
‘Set and forget’ system ensures zero loss of clamping force over time.
Locking design provides a rock solid platform and a high clamping force with minimal e�ort from user.
Engineered to withstand high shock loading.
Corrosion resistant alloy castings, anodised and powder coated for extreme marine durability.
Easily adjusted. Unlock, reposition, lock again.
360° of rotation. 136° of tilt.
10
•
•
•
•
•
• Same great features as our standard PowerTower range (see page X).
•
RL-ARM-RYM
RL-ADM-RYM
A80294
A80293
All Rokk Mounts for a6, a7, e7 & Dragon�y
Compatability
rail mount
adjustable rail mountadjustable deck mount
Deck Pod
Mast Pod
Rail Pod
ORDERING INFO
SPM-MAXI-C X10309 3 x ST70+ Maxi Instruments (Carbon)
SPM-3I-W A80106 3 x Std Instruments
SPM-4I-W A80149 4 x Std Instruments
SPM-2MAXI-W A80108 2 x ST70+ Maxi Instruments
SPM-MAXI-W A80109 3 x ST70+ Maxi Instruments
SPR-7-RM A80239 For a6 to e7 (Rail Mounted)
SPR-7-AM A80240 For a6 to e7 (Arm Mounted)
ScanstrutItem Code
RaymarineItem Code
Description
ORDERING INFO
ScanstrutItem Code
RaymarineItem Code
Description
ORDERING INFO
ScanstrutItem Code
RaymarineItem Code
Description
SPD-8D-W A80103 Up to 9” Displays
SPD-12D-W A80104 Up to 12” Displays
SPD-15D-W A80105 Up to 15” Displays
SPD-7-W-E7 A80185 For e7
SPD-8-W-E9 A80186 Pre-cut for e9 MFD
SPD-12-W-E12 A80187 Pre-cut for e12 MFD
SPD-4XI-W A80193 1 x e7 & 2 x i70
Options to installDesigned with options to install 7” displays or 1 standard instrument.
Arm Mounted
Extend the Pod away from narrow or crowded rails for better viewing. Designed to ensure the Pod is always positioned for best viewing whatever the angle of the rail. Cables are routed internally and accessed easily via a removable cover.
Rail Mounted
Fit your display onto standard and curved rails. Viewing angled can set upon installation. Cables are routed internally through clamp and into the rail.
Swivel & tilt baseOne handed quick release action. Simply release the lever, swivel and tilt to suit requirements before lockng back into position.
Best viewing angleAn adjustable ball joint allows range of movement and multiple mounting angles.
Added strengthAn inner bracing plate secures the Deck Pod base to the pod and gives increased rigidty to the assembly eliminating potential damage from shock and vibration.
Universal mountThe range has been designed to �t mast sizes from 76mm to 223mm. Mast arms pivot about semi circular washers and an additional cross-brace provides sti�ness preventing sideways movement.
Current sailboat designs often have very open cockpits with few options for installing retro-�t instruments. The new Arm and Rail Mount options allow smaller instruments and chartplotters to be rail mounted anywhere onboard.
Solve the challenge of �nding a level mounting surface to install your displays onto your powerboat, RIB or sailbot wheelhouse.
Using a one-handed quick release lever, simply release, swivel and tilt to suit your requirements before locking back into position.
Whether racing or cruising, our Mast Pods give you the best view of your instruments.
Mast arms pivot to provide a universal �t to a wide range of mast sizes. A cross-brace adds rigidity and prevents sideways movement of the pod.
•
•
•
•
•
Carb
on M
ast P
od
9
Scanpod
Helm Pod
INSTRUMENTS DISPLAYS
Great design and neat features ensure the Scanstrut Helm Pod is the perfect choice for all cockpit con�gurations.
Our unique ‘No-Drill’ clamping system provides a universal �t on any pedestal rail. A set of mounting saddles gives a secure, watertight �xture at the rear of the pod.
Universal helm �xingFits pedestal rails from 25mm to 33.7mm. Using a unique clamping system, the pod can �t rail widths from 178mm upwards.
No Drill �xing kitCustomised U-bolts �t around rail and through the saddles into the back of the pod eliminating the need for time consuming and awkward drilling of the stainless rail.
Secure & watertight installA saddle system supports the stainless tubing to allow a secure and rigid �t onto any pedestal and also ensures a watertight seal at cable entry.
8
The product of choice for leading boat builders World-
wide, the Scanpod range has gained an enviable reputation
for exceptional quality since its launch in 2009.
SPH-3I-W A80110 3 x Std Instruments
SPH-8D-W A80112 Up to 9” Displays
SPH-12D-W A80113 Up to 12” Displays
SPH-15D-W A80114 Up to 15” Displays
SPH-SYSTEM-W A80115 9” Display + 4 Std Instruments / 12” Display + 2 Std Instruments
SPH-8-W-E9 A80183 Pre-cut for e9 MFD
SPH-12-W-E12 A80184 Pre-cut for e12 MFD
SPH-4XI-W A80194 1 x e7 & 2 x i70
ORDERING INFO
ScanstrutItem Code
RaymarineItem Code
Description
•
•
•
• Single piece composite GRP moulding for high strength and corrosion resistance*.
• and antenna.
• and maintenance.
* Stainless steel mounts available to install larger KVH M9 & Intellian i9 antenna.
Satcom Antenna Mount
ORDERING INFO
SC35 X10021-SCA Fits 37STV
SC30 X10018-SCA Fits 33STV
Fits 45STVX10022-SCASC45R
SC65 X10023-SCA Fits 60STV
ScanstrutItem Code
RaymarineItem Code
Description
SATCOM/TV
Reduce the footprint size of your satcom antenna by up to 60% to give you greater choice when choosing where to install your satcom antenna.
Adjustable Base Wedge
Satcom antennas require a horizontal mounting surface to function correctly.
Satcom wedges eradicate this problem by providing a level mounting on slopes from 0° to 12°.
Simply counter rotate the angled discs until the top surface is horizontal.
TIP: Mounting on a curved arch? The Adjustable Base Wedge accessory will solve your problem and level your satcom installation.
7
ACCESSORIES AVAILABLE:
SC50 X10026-SCA Compatible with SC35, SC45R and SC65 only.
ScanstrutItem Code
RaymarineItem Code
Description
•
• Install up to 4 GPS/VHF antenna.
• Hollow wings and stem allow hidden cabling.
• Option available to mount additional 30cm/40cm satcom at the top of the mast.
Dual PowerTower
ORDERING INFO
DPT-SR1-30 X10014-SCA Radar* + 33STV/37STV
Radar* + 45STVX10015-SCADPT-SR1-40
DPT-S01-40 X10016-SCA Open array** + 45STV
ScanstrutItem Code
RaymarineItem Code
Description
ORDERING INFO
PTM-R1-1 A80147 Radar*
Radar* + 45STVA80148PTM-R1-S40
ScanstrutItem Code
RaymarineItem Code
Description
RADOMES OPEN ARRAY SATCOM/TV
Tapered Mast
Elevating the satcom antenna above the radar eliminates antenna interference and ensures maximum performance from both applications.
Single combination mount for multiple marine electronics. Each item is positioned for maximum performance.
Features an adjustable mounting plate to allow for variation in radome size.
Positions the radar as close as possible to the structural centre of gravity, ensuring minimal load is placed on the radar arch.
TIP: Ideal for smaller powerboats where mounting space is limited.
Compact Dual PowerTower
SATCOM/TVRADOMES
CAMERAS
GPS / VHF ANTENNA
LIGHTS
6
• Antenna fastens to PowerTower using own mounting bolts.
• Pre-drilled mounting holes for ease of installation.
• IP65 gland supplied to seal cable into stem for internal cable management.
• Watertight base seal included – no need for messy sealant.
*Compatible with RD418D / RD424D / RD418HD / RD424HD
**Compatible with RA1048D / RA3048HD / RA1048SHD / RA3048SHD
*Compatible with RD418D / RD424D / RD418HD / RD424HD
• Antenna fastens to PowerTower using own mounting bolts.
• Pre-drilled mounting holes for ease of installation.
• IP65 gland supplied to seal cable into stem for internal cable management.
• Watertight base seal included – no need for messy sealant.
Stronger for heavier equipment.
• White powder coated.
• 25° forward leaning (30° aft
leaning for open array).
• Choice of 130mm (5”) or 250mm (10”) heights.
Lightweight, suits any boat.
•
• 30° aft leaning.
• Choice of 150mm (6”) or 350mm (14”) heights.
Ideal for narrow RIB arches.
•
• 30° aft leaning.
• 150mm (6”) height.
PowerTower
ORDERING INFO
PT2001 X10012-SCA 350mm height | Composite
150mm height | CompositeX10013-SCAPT2004
SPT1001 A80121 150mm height | Stainless steel
130mm height | AluminiumA80122APT19000
ScanstrutItem Code
RaymarineItem Code
Description
RADOMES SATCOM/TV
Install your antenna on the cabin roof, flybridge or radar arch of your powerboat.
Aluminium Composite Stainless steel
Choice of material:
5
Nav Light and GPS / VHF Antenna Mount
Install Nav Light, GPS or VHF antennas above the radar for maximum visibility and performance.
Attach using radar mounting bolts, no extra fastenings required. (1” by 14 tpi thread)
ACCESSORIES AVAILABLE:
Compatible with RD418D / RD424D / RD418HD / RD424HDSC110 X10017-SCA For Nav Lights (Port mounted)
SC111 X10018-SCA For GPS / VHF Antenna (Starboard mounted)
SC112 X10019-SCA For GPS / VHF Antenna (Port mounted)
ScanstrutItem Code
RaymarineItem Code
Description
• 1.9m (6.4’) recommended for level deck mounting and 2.5m (8.3’) recommended for sloping transoms.
• Accommodates two cable channels with a cover strip to hold cables in place and out of view.
• Two support modules provide maximum fore / aft and sideways support.
• Unscrew base and remove pole for racing or winter storage, leaving just
Rail stand-o� Deck strut Adjustable base
SC100 Pole Mount
Nav Light and GPS / VHF Antenna Mount
Install Nav Light, GPS or VHF antennas above the radar for maximum visibility and performance.
Attach using radar mounting bolts, no extra fastenings required. (1” by 14 tpi thread)
ORDERING INFO
SC101 X10010-SCA 1.9m height SC100 Pole*
2.5m height SC100 Pole*X10011-SCASC102
4m Through Deck SC2 Pole**X10120-SCASC2-4
ScanstrutItem Code
RaymarineItem Code
Description
RADOMES SATCOM/TV
Versatile pole mount for deck or transom mounting. No customisation or adjustment required, it works straight from the box.
4
ACCESSORIES AVAILABLE:
*Compatible with RD418D / RD424D / RD418HD / RD424HD
**Compatible with RD418D / RD424D / RD418HD / RD424HD Use with SC45R for 45STV / with SC65 for 60STVSC110 X10017-SCA For Nav Lights (Port mounted)
SC111 X10018-SCA For GPS / VHF Antenna (Starboard mounted)
SC112 X10019-SCA For GPS / VHF Antenna (Port mounted)
ScanstrutItem Code
RaymarineItem Code
Description
• Attaches to mast with four swivel feet, matching a variety
•
•
• Safety wire kit independently attaches scanner to mast for additional protection.
Mast Mount
Radar Guard
Polished stainless guards protect radome from damage and reduce wear on the sails.
Mounted using radome bolts, no extra fastenings required.
ORDERING INFO
M92722 M92722 To �t RD418D / RD418HD
To �t RD424D / RD424HDM92698M92698
ScanstrutItem Code
RaymarineItem Code
Description
RADOMES SATCOM/TV
Still the first choice for boat owners Worldwide, Scanstrut leads the way with a new generation of Mast Mounts.
Stronger. Lighter. Easier to �t.
3
ACCESSORIES AVAILABLE:
SC27 X1006-SCA To �t M92722
ScanstrutItem Code
RaymarineItem Code
Description
• • Can be installed on both adjustable and split backstays.
• Options to mount radome fore or aft of backstay.
• 2.6m (8’6”) aluminium mounting pole – supplied in 2 lengths with hidden joiner piece.
• Can be deck, transom or chainplate mounted.
• Range of nylon bushes supplied. Clamps around backstay so cable tension can be adjusted.
Backstay Mounted Mast Mounted
•
TIP: When mounting radome forward of backstay, check clearance between radome and mainsail.
Self-Levelling Radar Mount
Beautifully styled and expertly engineered to ensure your radar stays level with the horizon at all times for optimum antenna performance.
As the boat heels or rolls, the radar is kept horizontal preventing target loss and giving the best possible radar picture.
Maintenance free & no power required.
Radome cradle with �ne tune adjustment for di�erent mast rake angles.
• Attaches to mast with four swivel feet, matching a variety of mast pro�les.
"Picture perfect radar performance."
As tested by
ACCESSORIES AVAILABLE:
GPS / VHF Antenna Mount for Self-Lev-elling Radar Mount
Single mount for installing an additional GPS / VHF antenna above the radar. (1” by 14 tpi thread)
ORDERING INFO
LMB-A1 X10002-SCA Backstay Mount (aft mounted radar)
LM-GPS A80117 For all Leveller models
Backstay Mount (fore mounted radar)
Mast Mount
X10001-SCA
X10000-SCA
LMB-F1
LMM-F1
All compatible with RD418D / RD424D / RD418HD / RD424HD
ScanstrutItem Code
RaymarineItem Code
Description
2
RADOMES
ScanstrutItem Code
RaymarineItem Code
Description
Self-Levelling Radar Mount
RADAR OPEN ARRAY
Raymarine Marine Electronics
Scanstrut Products SATCOM GPS ANTENNA DISPLAYS INSTRUMENTS CAMERAS PAGE
Mast Mount
SC100 Pole Mount
PowerTower
Dual PowerTower
Electrical Accessories
With over 25 years experience, make Scanstrut an essential part of your Raymarine electronics installa-tion.
Fully endorsed and recommended by Raymarine, a selection of the best-selling Scanstrut range is stocked centrally and available to order from Raymarine dealers worldwide.
We offer a range of products to install the following:
Visit www.scanstrut.com for further product information and technical specifications.
Marine Electronics Mounts
We o�er a standard range of over 100 di�erent installation products to mount your Raymarine radar, satcom, MFD displays, instruments, cameras and GPS antennas onto yachts, powerboats, commercial and military vessels.
Electrical Accessories
Electronics and seawater are not the best of friends and it’s essential that your installation remains dry inside.
The Scanstrut range of Electrical Accessories will ensure you complete your marine electronics install in the best way possible.
Scanstrut Accessories
A range of Accessories is available for your Scanstrut installation. From mounting an additional light or GPS Antenna, to accessories which aid installation and performance.
2
3
4
5
6
11
Scanpod 8/9 ROKK 10 Camera Mounts 10
Satcom Antenna Mount 7
Tapered Mast 6
Product Guide
PRODUCTGUIDE
2015
ORDERING INFO
DS16-P A80123 Connectors up to ø16mm | Cables 2-8mm
DS21A-P A80124 Connectors up to ø21mm | Cables 4-9mm
DS21B-P A80125 Connectors up to ø21mm | Cables 9-14mm
DS30-P A80126 Connectors up to ø30mm | Cables 9-14mm
DS-MULTI A80127 Multiple cables up to ø18mm
ScanstrutItem Code
RaymarineItem Code
Description
Electronics and seawater are not the best of friends and it’s essential that your installation remains dry inside.
The Scanstrut range of Electrical Accessories will ensure you complete your marine electronics install in the best way possible.
Electrical Accessories
Deck Seals
The only guaranteed and proven watertight installation for your antenna and navlight cables.
Pass cables into the boat, anywhere on deck. No need to remove cable plug.
Low pro�le shape for a stronger, impact resistant seal. No sharp edges to hit your foot on!
Supplied with blank and pre-drilled inner seals.
Split seal eliminates need to remove cable connectors during install.
Captive nuts in base provide easy assembly and allow reliable repeat installations.
Designed to �t multiple cables up to 15mm dia. Supplied with undrilled seal and made from marine grade aluminum with hard anodised �nish to resist impact marks.
WATERPROOF GUARANTEEIPX6 & IPX7 Tested & Approved.
Junction Box
The ‘�t and forget’ Junction Box range is the perfect sailing accessory for anyone planning boat maintenance, providing secure, IP66 watertight connections for marine electrical cables onboard any boat.
Choice of ‘standard’ box with 5 screw-down terminals or a ‘deluxe’ version which includes 10 fast-�t terminals for a quicker install.
Fit directly to chosen surface. A mounting bracket is included to allow easy removal for inspection.
Upgrade to IP67 with a Cable Seal upgrade kit.
Multi Deck Seal
11
•
•
•
•
•
•
•
ORDERING INFO
SB-8-5 A80129 Standard Junction Box | 5 screw down terminals
SB-8-10 A80130 Deluxe Junction Box | 10 fast �t terminals
SB-2G A80128 Cable Seal Pack (x2)
ScanstrutItem Code
RaymarineItem Code
Description
Visit www.scanstrut.com for further information.
Camera Mounts
ORDERING INFO
CAM-PT-150 A80119 PowerTower* - 150mm height
CAM-MM-01 A80118 Mast Mount*
PowerTower* - 300mm heightA80120CAM-PT-300
*Compatible with M-Series, T-Series & Navigator
ScanstrutItem Code
RaymarineItem Code
Description
CAMERAS
Options for installing Raymarine thermal imaging cameras onto your power or sail boat for maximum visibility at all times.
Compact Mast Mount for installation onto yacht masts.
Same great features as our standard Mast Mount range (see page X).
Camera Mast MountRaise your Camera from the deck to ensure clear visibility at all times. Designed with a 30° aft leaning profile and a small base footprint.
Camera PowerTower
ORDERING INFO
RL-RM-RYM A80295
ScanstrutItem Code
RaymarineItem Code
Description
A multi position mount for small electronic devices onboard.
Install fishfinders and chartplotters at the helm, RIB console, fishing boat dashboard , nav station and more.
ROKKINSTRUMENTS DISPLAYS
Adjustable Deck Mount
Designed to be versatile. Mount anywhere onboard.
‘Set and forget’ system ensures zero loss of clamping force over time.
Locking design provides a rock solid platform and a high clamping force with minimal e�ort from user.
Engineered to withstand high shock loading.
Corrosion resistant alloy castings, anodised and powder coated for extreme marine durability.
Easily adjusted. Unlock, reposition, lock again.
360° of rotation. 136° of tilt.
10
•
•
•
•
•
• Same great features as our standard PowerTower range (see page X).
•
RL-ARM-RYM
RL-ADM-RYM
A80294
A80293
All Rokk Mounts for a6, a7, e7 & Dragon�y
Compatability
rail mount
adjustable rail mountadjustable deck mount
Deck Pod
Mast Pod
Rail Pod
ORDERING INFO
SPM-MAXI-C X10309 3 x ST70+ Maxi Instruments (Carbon)
SPM-3I-W A80106 3 x Std Instruments
SPM-4I-W A80149 4 x Std Instruments
SPM-2MAXI-W A80108 2 x ST70+ Maxi Instruments
SPM-MAXI-W A80109 3 x ST70+ Maxi Instruments
SPR-7-RM A80239 For a6 to e7 (Rail Mounted)
SPR-7-AM A80240 For a6 to e7 (Arm Mounted)
ScanstrutItem Code
RaymarineItem Code
Description
ORDERING INFO
ScanstrutItem Code
RaymarineItem Code
Description
ORDERING INFO
ScanstrutItem Code
RaymarineItem Code
Description
SPD-8D-W A80103 Up to 9” Displays
SPD-12D-W A80104 Up to 12” Displays
SPD-15D-W A80105 Up to 15” Displays
SPD-7-W-E7 A80185 For e7
SPD-8-W-E9 A80186 Pre-cut for e9 MFD
SPD-12-W-E12 A80187 Pre-cut for e12 MFD
SPD-4XI-W A80193 1 x e7 & 2 x i70
Options to installDesigned with options to install 7” displays or 1 standard instrument.
Arm Mounted
Extend the Pod away from narrow or crowded rails for better viewing. Designed to ensure the Pod is always positioned for best viewing whatever the angle of the rail. Cables are routed internally and accessed easily via a removable cover.
Rail Mounted
Fit your display onto standard and curved rails. Viewing angled can set upon installation. Cables are routed internally through clamp and into the rail.
Swivel & tilt baseOne handed quick release action. Simply release the lever, swivel and tilt to suit requirements before lockng back into position.
Best viewing angleAn adjustable ball joint allows range of movement and multiple mounting angles.
Added strengthAn inner bracing plate secures the Deck Pod base to the pod and gives increased rigidty to the assembly eliminating potential damage from shock and vibration.
Universal mountThe range has been designed to �t mast sizes from 76mm to 223mm. Mast arms pivot about semi circular washers and an additional cross-brace provides sti�ness preventing sideways movement.
Current sailboat designs often have very open cockpits with few options for installing retro-�t instruments. The new Arm and Rail Mount options allow smaller instruments and chartplotters to be rail mounted anywhere onboard.
Solve the challenge of �nding a level mounting surface to install your displays onto your powerboat, RIB or sailbot wheelhouse.
Using a one-handed quick release lever, simply release, swivel and tilt to suit your requirements before locking back into position.
Whether racing or cruising, our Mast Pods give you the best view of your instruments.
Mast arms pivot to provide a universal �t to a wide range of mast sizes. A cross-brace adds rigidity and prevents sideways movement of the pod.
•
•
•
•
•
Carb
on M
ast P
od
9
Scanpod
Helm Pod
INSTRUMENTS DISPLAYS
Great design and neat features ensure the Scanstrut Helm Pod is the perfect choice for all cockpit con�gurations.
Our unique ‘No-Drill’ clamping system provides a universal �t on any pedestal rail. A set of mounting saddles gives a secure, watertight �xture at the rear of the pod.
Universal helm �xingFits pedestal rails from 25mm to 33.7mm. Using a unique clamping system, the pod can �t rail widths from 178mm upwards.
No Drill �xing kitCustomised U-bolts �t around rail and through the saddles into the back of the pod eliminating the need for time consuming and awkward drilling of the stainless rail.
Secure & watertight installA saddle system supports the stainless tubing to allow a secure and rigid �t onto any pedestal and also ensures a watertight seal at cable entry.
8
The product of choice for leading boat builders World-
wide, the Scanpod range has gained an enviable reputation
for exceptional quality since its launch in 2009.
SPH-3I-W A80110 3 x Std Instruments
SPH-8D-W A80112 Up to 9” Displays
SPH-12D-W A80113 Up to 12” Displays
SPH-15D-W A80114 Up to 15” Displays
SPH-SYSTEM-W A80115 9” Display + 4 Std Instruments / 12” Display + 2 Std Instruments
SPH-8-W-E9 A80183 Pre-cut for e9 MFD
SPH-12-W-E12 A80184 Pre-cut for e12 MFD
SPH-4XI-W A80194 1 x e7 & 2 x i70
ORDERING INFO
ScanstrutItem Code
RaymarineItem Code
Description
•
•
•
• Single piece composite GRP moulding for high strength and corrosion resistance*.
• and antenna.
• and maintenance.
* Stainless steel mounts available to install larger KVH M9 & Intellian i9 antenna.
Satcom Antenna Mount
ORDERING INFO
SC35 X10021-SCA Fits 37STV
SC30 X10018-SCA Fits 33STV
Fits 45STVX10022-SCASC45R
SC65 X10023-SCA Fits 60STV
ScanstrutItem Code
RaymarineItem Code
Description
SATCOM/TV
Reduce the footprint size of your satcom antenna by up to 60% to give you greater choice when choosing where to install your satcom antenna.
Adjustable Base Wedge
Satcom antennas require a horizontal mounting surface to function correctly.
Satcom wedges eradicate this problem by providing a level mounting on slopes from 0° to 12°.
Simply counter rotate the angled discs until the top surface is horizontal.
TIP: Mounting on a curved arch? The Adjustable Base Wedge accessory will solve your problem and level your satcom installation.
7
ACCESSORIES AVAILABLE:
SC50 X10026-SCA Compatible with SC35, SC45R and SC65 only.
ScanstrutItem Code
RaymarineItem Code
Description
•
• Install up to 4 GPS/VHF antenna.
• Hollow wings and stem allow hidden cabling.
• Option available to mount additional 30cm/40cm satcom at the top of the mast.
Dual PowerTower
ORDERING INFO
DPT-SR1-30 X10014-SCA Radar* + 33STV/37STV
Radar* + 45STVX10015-SCADPT-SR1-40
DPT-S01-40 X10016-SCA Open array** + 45STV
ScanstrutItem Code
RaymarineItem Code
Description
ORDERING INFO
PTM-R1-1 A80147 Radar*
Radar* + 45STVA80148PTM-R1-S40
ScanstrutItem Code
RaymarineItem Code
Description
RADOMES OPEN ARRAY SATCOM/TV
Tapered Mast
Elevating the satcom antenna above the radar eliminates antenna interference and ensures maximum performance from both applications.
Single combination mount for multiple marine electronics. Each item is positioned for maximum performance.
Features an adjustable mounting plate to allow for variation in radome size.
Positions the radar as close as possible to the structural centre of gravity, ensuring minimal load is placed on the radar arch.
TIP: Ideal for smaller powerboats where mounting space is limited.
Compact Dual PowerTower
SATCOM/TVRADOMES
CAMERAS
GPS / VHF ANTENNA
LIGHTS
6
• Antenna fastens to PowerTower using own mounting bolts.
• Pre-drilled mounting holes for ease of installation.
• IP65 gland supplied to seal cable into stem for internal cable management.
• Watertight base seal included – no need for messy sealant.
*Compatible with RD418D / RD424D / RD418HD / RD424HD
**Compatible with RA1048D / RA3048HD / RA1048SHD / RA3048SHD
*Compatible with RD418D / RD424D / RD418HD / RD424HD
• Antenna fastens to PowerTower using own mounting bolts.
• Pre-drilled mounting holes for ease of installation.
• IP65 gland supplied to seal cable into stem for internal cable management.
• Watertight base seal included – no need for messy sealant.
Stronger for heavier equipment.
• White powder coated.
• 25° forward leaning (30° aft
leaning for open array).
• Choice of 130mm (5”) or 250mm (10”) heights.
Lightweight, suits any boat.
•
• 30° aft leaning.
• Choice of 150mm (6”) or 350mm (14”) heights.
Ideal for narrow RIB arches.
•
• 30° aft leaning.
• 150mm (6”) height.
PowerTower
ORDERING INFO
PT2001 X10012-SCA 350mm height | Composite
150mm height | CompositeX10013-SCAPT2004
SPT1001 A80121 150mm height | Stainless steel
130mm height | AluminiumA80122APT19000
ScanstrutItem Code
RaymarineItem Code
Description
RADOMES SATCOM/TV
Install your antenna on the cabin roof, flybridge or radar arch of your powerboat.
Aluminium Composite Stainless steel
Choice of material:
5
Nav Light and GPS / VHF Antenna Mount
Install Nav Light, GPS or VHF antennas above the radar for maximum visibility and performance.
Attach using radar mounting bolts, no extra fastenings required. (1” by 14 tpi thread)
ACCESSORIES AVAILABLE:
Compatible with RD418D / RD424D / RD418HD / RD424HDSC110 X10017-SCA For Nav Lights (Port mounted)
SC111 X10018-SCA For GPS / VHF Antenna (Starboard mounted)
SC112 X10019-SCA For GPS / VHF Antenna (Port mounted)
ScanstrutItem Code
RaymarineItem Code
Description
• 1.9m (6.4’) recommended for level deck mounting and 2.5m (8.3’) recommended for sloping transoms.
• Accommodates two cable channels with a cover strip to hold cables in place and out of view.
• Two support modules provide maximum fore / aft and sideways support.
• Unscrew base and remove pole for racing or winter storage, leaving just
Rail stand-o� Deck strut Adjustable base
SC100 Pole Mount
Nav Light and GPS / VHF Antenna Mount
Install Nav Light, GPS or VHF antennas above the radar for maximum visibility and performance.
Attach using radar mounting bolts, no extra fastenings required. (1” by 14 tpi thread)
ORDERING INFO
SC101 X10010-SCA 1.9m height SC100 Pole*
2.5m height SC100 Pole*X10011-SCASC102
4m Through Deck SC2 Pole**X10120-SCASC2-4
ScanstrutItem Code
RaymarineItem Code
Description
RADOMES SATCOM/TV
Versatile pole mount for deck or transom mounting. No customisation or adjustment required, it works straight from the box.
4
ACCESSORIES AVAILABLE:
*Compatible with RD418D / RD424D / RD418HD / RD424HD
**Compatible with RD418D / RD424D / RD418HD / RD424HD Use with SC45R for 45STV / with SC65 for 60STVSC110 X10017-SCA For Nav Lights (Port mounted)
SC111 X10018-SCA For GPS / VHF Antenna (Starboard mounted)
SC112 X10019-SCA For GPS / VHF Antenna (Port mounted)
ScanstrutItem Code
RaymarineItem Code
Description
• Attaches to mast with four swivel feet, matching a variety
•
•
• Safety wire kit independently attaches scanner to mast for additional protection.
Mast Mount
Radar Guard
Polished stainless guards protect radome from damage and reduce wear on the sails.
Mounted using radome bolts, no extra fastenings required.
ORDERING INFO
M92722 M92722 To �t RD418D / RD418HD
To �t RD424D / RD424HDM92698M92698
ScanstrutItem Code
RaymarineItem Code
Description
RADOMES SATCOM/TV
Still the first choice for boat owners Worldwide, Scanstrut leads the way with a new generation of Mast Mounts.
Stronger. Lighter. Easier to �t.
3
ACCESSORIES AVAILABLE:
SC27 X1006-SCA To �t M92722
ScanstrutItem Code
RaymarineItem Code
Description
• • Can be installed on both adjustable and split backstays.
• Options to mount radome fore or aft of backstay.
• 2.6m (8’6”) aluminium mounting pole – supplied in 2 lengths with hidden joiner piece.
• Can be deck, transom or chainplate mounted.
• Range of nylon bushes supplied. Clamps around backstay so cable tension can be adjusted.
Backstay Mounted Mast Mounted
•
TIP: When mounting radome forward of backstay, check clearance between radome and mainsail.
Self-Levelling Radar Mount
Beautifully styled and expertly engineered to ensure your radar stays level with the horizon at all times for optimum antenna performance.
As the boat heels or rolls, the radar is kept horizontal preventing target loss and giving the best possible radar picture.
Maintenance free & no power required.
Radome cradle with �ne tune adjustment for di�erent mast rake angles.
• Attaches to mast with four swivel feet, matching a variety of mast pro�les.
"Picture perfect radar performance."
As tested by
ACCESSORIES AVAILABLE:
GPS / VHF Antenna Mount for Self-Lev-elling Radar Mount
Single mount for installing an additional GPS / VHF antenna above the radar. (1” by 14 tpi thread)
ORDERING INFO
LMB-A1 X10002-SCA Backstay Mount (aft mounted radar)
LM-GPS A80117 For all Leveller models
Backstay Mount (fore mounted radar)
Mast Mount
X10001-SCA
X10000-SCA
LMB-F1
LMM-F1
All compatible with RD418D / RD424D / RD418HD / RD424HD
ScanstrutItem Code
RaymarineItem Code
Description
2
RADOMES
ScanstrutItem Code
RaymarineItem Code
Description
Self-Levelling Radar Mount
RADAR OPEN ARRAY
Raymarine Marine Electronics
Scanstrut Products SATCOM GPS ANTENNA DISPLAYS INSTRUMENTS CAMERAS PAGE
Mast Mount
SC100 Pole Mount
PowerTower
Dual PowerTower
Electrical Accessories
With over 25 years experience, make Scanstrut an essential part of your Raymarine electronics installa-tion.
Fully endorsed and recommended by Raymarine, a selection of the best-selling Scanstrut range is stocked centrally and available to order from Raymarine dealers worldwide.
We offer a range of products to install the following:
Visit www.scanstrut.com for further product information and technical specifications.
Marine Electronics Mounts
We o�er a standard range of over 100 di�erent installation products to mount your Raymarine radar, satcom, MFD displays, instruments, cameras and GPS antennas onto yachts, powerboats, commercial and military vessels.
Electrical Accessories
Electronics and seawater are not the best of friends and it’s essential that your installation remains dry inside.
The Scanstrut range of Electrical Accessories will ensure you complete your marine electronics install in the best way possible.
Scanstrut Accessories
A range of Accessories is available for your Scanstrut installation. From mounting an additional light or GPS Antenna, to accessories which aid installation and performance.
2
3
4
5
6
11
Scanpod 8/9 ROKK 10 Camera Mounts 10
Satcom Antenna Mount 7
Tapered Mast 6
Product Guide
PRODUCTGUIDE
2015
ORDERING INFO
DS16-P A80123 Connectors up to ø16mm | Cables 2-8mm
DS21A-P A80124 Connectors up to ø21mm | Cables 4-9mm
DS21B-P A80125 Connectors up to ø21mm | Cables 9-14mm
DS30-P A80126 Connectors up to ø30mm | Cables 9-14mm
DS-MULTI A80127 Multiple cables up to ø18mm
ScanstrutItem Code
RaymarineItem Code
Description
Electronics and seawater are not the best of friends and it’s essential that your installation remains dry inside.
The Scanstrut range of Electrical Accessories will ensure you complete your marine electronics install in the best way possible.
Electrical Accessories
Deck Seals
The only guaranteed and proven watertight installation for your antenna and navlight cables.
Pass cables into the boat, anywhere on deck. No need to remove cable plug.
Low pro�le shape for a stronger, impact resistant seal. No sharp edges to hit your foot on!
Supplied with blank and pre-drilled inner seals.
Split seal eliminates need to remove cable connectors during install.
Captive nuts in base provide easy assembly and allow reliable repeat installations.
Designed to �t multiple cables up to 15mm dia. Supplied with undrilled seal and made from marine grade aluminum with hard anodised �nish to resist impact marks.
WATERPROOF GUARANTEEIPX6 & IPX7 Tested & Approved.
Junction Box
The ‘�t and forget’ Junction Box range is the perfect sailing accessory for anyone planning boat maintenance, providing secure, IP66 watertight connections for marine electrical cables onboard any boat.
Choice of ‘standard’ box with 5 screw-down terminals or a ‘deluxe’ version which includes 10 fast-�t terminals for a quicker install.
Fit directly to chosen surface. A mounting bracket is included to allow easy removal for inspection.
Upgrade to IP67 with a Cable Seal upgrade kit.
Multi Deck Seal
11
•
•
•
•
•
•
•
ORDERING INFO
SB-8-5 A80129 Standard Junction Box | 5 screw down terminals
SB-8-10 A80130 Deluxe Junction Box | 10 fast �t terminals
SB-2G A80128 Cable Seal Pack (x2)
ScanstrutItem Code
RaymarineItem Code
Description
Visit www.scanstrut.com for further information.
Camera Mounts
ORDERING INFO
CAM-PT-150 A80119 PowerTower* - 150mm height
CAM-MM-01 A80118 Mast Mount*
PowerTower* - 300mm heightA80120CAM-PT-300
*Compatible with M-Series, T-Series & Navigator
ScanstrutItem Code
RaymarineItem Code
Description
CAMERAS
Options for installing Raymarine thermal imaging cameras onto your power or sail boat for maximum visibility at all times.
Compact Mast Mount for installation onto yacht masts.
Same great features as our standard Mast Mount range (see page X).
Camera Mast MountRaise your Camera from the deck to ensure clear visibility at all times. Designed with a 30° aft leaning profile and a small base footprint.
Camera PowerTower
ORDERING INFO
RL-RM-RYM A80295
ScanstrutItem Code
RaymarineItem Code
Description
A multi position mount for small electronic devices onboard.
Install fishfinders and chartplotters at the helm, RIB console, fishing boat dashboard , nav station and more.
ROKKINSTRUMENTS DISPLAYS
Adjustable Deck Mount
Designed to be versatile. Mount anywhere onboard.
‘Set and forget’ system ensures zero loss of clamping force over time.
Locking design provides a rock solid platform and a high clamping force with minimal e�ort from user.
Engineered to withstand high shock loading.
Corrosion resistant alloy castings, anodised and powder coated for extreme marine durability.
Easily adjusted. Unlock, reposition, lock again.
360° of rotation. 136° of tilt.
10
•
•
•
•
•
• Same great features as our standard PowerTower range (see page X).
•
RL-ARM-RYM
RL-ADM-RYM
A80294
A80293
All Rokk Mounts for a6, a7, e7 & Dragon�y
Compatability
rail mount
adjustable rail mountadjustable deck mount
Deck Pod
Mast Pod
Rail Pod
ORDERING INFO
SPM-MAXI-C X10309 3 x ST70+ Maxi Instruments (Carbon)
SPM-3I-W A80106 3 x Std Instruments
SPM-4I-W A80149 4 x Std Instruments
SPM-2MAXI-W A80108 2 x ST70+ Maxi Instruments
SPM-MAXI-W A80109 3 x ST70+ Maxi Instruments
SPR-7-RM A80239 For a6 to e7 (Rail Mounted)
SPR-7-AM A80240 For a6 to e7 (Arm Mounted)
ScanstrutItem Code
RaymarineItem Code
Description
ORDERING INFO
ScanstrutItem Code
RaymarineItem Code
Description
ORDERING INFO
ScanstrutItem Code
RaymarineItem Code
Description
SPD-8D-W A80103 Up to 9” Displays
SPD-12D-W A80104 Up to 12” Displays
SPD-15D-W A80105 Up to 15” Displays
SPD-7-W-E7 A80185 For e7
SPD-8-W-E9 A80186 Pre-cut for e9 MFD
SPD-12-W-E12 A80187 Pre-cut for e12 MFD
SPD-4XI-W A80193 1 x e7 & 2 x i70
Options to installDesigned with options to install 7” displays or 1 standard instrument.
Arm Mounted
Extend the Pod away from narrow or crowded rails for better viewing. Designed to ensure the Pod is always positioned for best viewing whatever the angle of the rail. Cables are routed internally and accessed easily via a removable cover.
Rail Mounted
Fit your display onto standard and curved rails. Viewing angled can set upon installation. Cables are routed internally through clamp and into the rail.
Swivel & tilt baseOne handed quick release action. Simply release the lever, swivel and tilt to suit requirements before lockng back into position.
Best viewing angleAn adjustable ball joint allows range of movement and multiple mounting angles.
Added strengthAn inner bracing plate secures the Deck Pod base to the pod and gives increased rigidty to the assembly eliminating potential damage from shock and vibration.
Universal mountThe range has been designed to �t mast sizes from 76mm to 223mm. Mast arms pivot about semi circular washers and an additional cross-brace provides sti�ness preventing sideways movement.
Current sailboat designs often have very open cockpits with few options for installing retro-�t instruments. The new Arm and Rail Mount options allow smaller instruments and chartplotters to be rail mounted anywhere onboard.
Solve the challenge of �nding a level mounting surface to install your displays onto your powerboat, RIB or sailbot wheelhouse.
Using a one-handed quick release lever, simply release, swivel and tilt to suit your requirements before locking back into position.
Whether racing or cruising, our Mast Pods give you the best view of your instruments.
Mast arms pivot to provide a universal �t to a wide range of mast sizes. A cross-brace adds rigidity and prevents sideways movement of the pod.
•
•
•
•
•
Carb
on M
ast P
od
9
Scanpod
Helm Pod
INSTRUMENTS DISPLAYS
Great design and neat features ensure the Scanstrut Helm Pod is the perfect choice for all cockpit con�gurations.
Our unique ‘No-Drill’ clamping system provides a universal �t on any pedestal rail. A set of mounting saddles gives a secure, watertight �xture at the rear of the pod.
Universal helm �xingFits pedestal rails from 25mm to 33.7mm. Using a unique clamping system, the pod can �t rail widths from 178mm upwards.
No Drill �xing kitCustomised U-bolts �t around rail and through the saddles into the back of the pod eliminating the need for time consuming and awkward drilling of the stainless rail.
Secure & watertight installA saddle system supports the stainless tubing to allow a secure and rigid �t onto any pedestal and also ensures a watertight seal at cable entry.
8
The product of choice for leading boat builders World-
wide, the Scanpod range has gained an enviable reputation
for exceptional quality since its launch in 2009.
SPH-3I-W A80110 3 x Std Instruments
SPH-8D-W A80112 Up to 9” Displays
SPH-12D-W A80113 Up to 12” Displays
SPH-15D-W A80114 Up to 15” Displays
SPH-SYSTEM-W A80115 9” Display + 4 Std Instruments / 12” Display + 2 Std Instruments
SPH-8-W-E9 A80183 Pre-cut for e9 MFD
SPH-12-W-E12 A80184 Pre-cut for e12 MFD
SPH-4XI-W A80194 1 x e7 & 2 x i70
ORDERING INFO
ScanstrutItem Code
RaymarineItem Code
Description
•
•
•
• Single piece composite GRP moulding for high strength and corrosion resistance*.
• and antenna.
• and maintenance.
* Stainless steel mounts available to install larger KVH M9 & Intellian i9 antenna.
Satcom Antenna Mount
ORDERING INFO
SC35 X10021-SCA Fits 37STV
SC30 X10018-SCA Fits 33STV
Fits 45STVX10022-SCASC45R
SC65 X10023-SCA Fits 60STV
ScanstrutItem Code
RaymarineItem Code
Description
SATCOM/TV
Reduce the footprint size of your satcom antenna by up to 60% to give you greater choice when choosing where to install your satcom antenna.
Adjustable Base Wedge
Satcom antennas require a horizontal mounting surface to function correctly.
Satcom wedges eradicate this problem by providing a level mounting on slopes from 0° to 12°.
Simply counter rotate the angled discs until the top surface is horizontal.
TIP: Mounting on a curved arch? The Adjustable Base Wedge accessory will solve your problem and level your satcom installation.
7
ACCESSORIES AVAILABLE:
SC50 X10026-SCA Compatible with SC35, SC45R and SC65 only.
ScanstrutItem Code
RaymarineItem Code
Description
•
• Install up to 4 GPS/VHF antenna.
• Hollow wings and stem allow hidden cabling.
• Option available to mount additional 30cm/40cm satcom at the top of the mast.
Dual PowerTower
ORDERING INFO
DPT-SR1-30 X10014-SCA Radar* + 33STV/37STV
Radar* + 45STVX10015-SCADPT-SR1-40
DPT-S01-40 X10016-SCA Open array** + 45STV
ScanstrutItem Code
RaymarineItem Code
Description
ORDERING INFO
PTM-R1-1 A80147 Radar*
Radar* + 45STVA80148PTM-R1-S40
ScanstrutItem Code
RaymarineItem Code
Description
RADOMES OPEN ARRAY SATCOM/TV
Tapered Mast
Elevating the satcom antenna above the radar eliminates antenna interference and ensures maximum performance from both applications.
Single combination mount for multiple marine electronics. Each item is positioned for maximum performance.
Features an adjustable mounting plate to allow for variation in radome size.
Positions the radar as close as possible to the structural centre of gravity, ensuring minimal load is placed on the radar arch.
TIP: Ideal for smaller powerboats where mounting space is limited.
Compact Dual PowerTower
SATCOM/TVRADOMES
CAMERAS
GPS / VHF ANTENNA
LIGHTS
6
• Antenna fastens to PowerTower using own mounting bolts.
• Pre-drilled mounting holes for ease of installation.
• IP65 gland supplied to seal cable into stem for internal cable management.
• Watertight base seal included – no need for messy sealant.
*Compatible with RD418D / RD424D / RD418HD / RD424HD
**Compatible with RA1048D / RA3048HD / RA1048SHD / RA3048SHD
*Compatible with RD418D / RD424D / RD418HD / RD424HD
• Antenna fastens to PowerTower using own mounting bolts.
• Pre-drilled mounting holes for ease of installation.
• IP65 gland supplied to seal cable into stem for internal cable management.
• Watertight base seal included – no need for messy sealant.
Stronger for heavier equipment.
• White powder coated.
• 25° forward leaning (30° aft
leaning for open array).
• Choice of 130mm (5”) or 250mm (10”) heights.
Lightweight, suits any boat.
•
• 30° aft leaning.
• Choice of 150mm (6”) or 350mm (14”) heights.
Ideal for narrow RIB arches.
•
• 30° aft leaning.
• 150mm (6”) height.
PowerTower
ORDERING INFO
PT2001 X10012-SCA 350mm height | Composite
150mm height | CompositeX10013-SCAPT2004
SPT1001 A80121 150mm height | Stainless steel
130mm height | AluminiumA80122APT19000
ScanstrutItem Code
RaymarineItem Code
Description
RADOMES SATCOM/TV
Install your antenna on the cabin roof, flybridge or radar arch of your powerboat.
Aluminium Composite Stainless steel
Choice of material:
5
Nav Light and GPS / VHF Antenna Mount
Install Nav Light, GPS or VHF antennas above the radar for maximum visibility and performance.
Attach using radar mounting bolts, no extra fastenings required. (1” by 14 tpi thread)
ACCESSORIES AVAILABLE:
Compatible with RD418D / RD424D / RD418HD / RD424HDSC110 X10017-SCA For Nav Lights (Port mounted)
SC111 X10018-SCA For GPS / VHF Antenna (Starboard mounted)
SC112 X10019-SCA For GPS / VHF Antenna (Port mounted)
ScanstrutItem Code
RaymarineItem Code
Description
• 1.9m (6.4’) recommended for level deck mounting and 2.5m (8.3’) recommended for sloping transoms.
• Accommodates two cable channels with a cover strip to hold cables in place and out of view.
• Two support modules provide maximum fore / aft and sideways support.
• Unscrew base and remove pole for racing or winter storage, leaving just
Rail stand-o� Deck strut Adjustable base
SC100 Pole Mount
Nav Light and GPS / VHF Antenna Mount
Install Nav Light, GPS or VHF antennas above the radar for maximum visibility and performance.
Attach using radar mounting bolts, no extra fastenings required. (1” by 14 tpi thread)
ORDERING INFO
SC101 X10010-SCA 1.9m height SC100 Pole*
2.5m height SC100 Pole*X10011-SCASC102
4m Through Deck SC2 Pole**X10120-SCASC2-4
ScanstrutItem Code
RaymarineItem Code
Description
RADOMES SATCOM/TV
Versatile pole mount for deck or transom mounting. No customisation or adjustment required, it works straight from the box.
4
ACCESSORIES AVAILABLE:
*Compatible with RD418D / RD424D / RD418HD / RD424HD
**Compatible with RD418D / RD424D / RD418HD / RD424HD Use with SC45R for 45STV / with SC65 for 60STVSC110 X10017-SCA For Nav Lights (Port mounted)
SC111 X10018-SCA For GPS / VHF Antenna (Starboard mounted)
SC112 X10019-SCA For GPS / VHF Antenna (Port mounted)
ScanstrutItem Code
RaymarineItem Code
Description
• Attaches to mast with four swivel feet, matching a variety
•
•
• Safety wire kit independently attaches scanner to mast for additional protection.
Mast Mount
Radar Guard
Polished stainless guards protect radome from damage and reduce wear on the sails.
Mounted using radome bolts, no extra fastenings required.
ORDERING INFO
M92722 M92722 To �t RD418D / RD418HD
To �t RD424D / RD424HDM92698M92698
ScanstrutItem Code
RaymarineItem Code
Description
RADOMES SATCOM/TV
Still the first choice for boat owners Worldwide, Scanstrut leads the way with a new generation of Mast Mounts.
Stronger. Lighter. Easier to �t.
3
ACCESSORIES AVAILABLE:
SC27 X1006-SCA To �t M92722
ScanstrutItem Code
RaymarineItem Code
Description
• • Can be installed on both adjustable and split backstays.
• Options to mount radome fore or aft of backstay.
• 2.6m (8’6”) aluminium mounting pole – supplied in 2 lengths with hidden joiner piece.
• Can be deck, transom or chainplate mounted.
• Range of nylon bushes supplied. Clamps around backstay so cable tension can be adjusted.
Backstay Mounted Mast Mounted
•
TIP: When mounting radome forward of backstay, check clearance between radome and mainsail.
Self-Levelling Radar Mount
Beautifully styled and expertly engineered to ensure your radar stays level with the horizon at all times for optimum antenna performance.
As the boat heels or rolls, the radar is kept horizontal preventing target loss and giving the best possible radar picture.
Maintenance free & no power required.
Radome cradle with �ne tune adjustment for di�erent mast rake angles.
• Attaches to mast with four swivel feet, matching a variety of mast pro�les.
"Picture perfect radar performance."
As tested by
ACCESSORIES AVAILABLE:
GPS / VHF Antenna Mount for Self-Lev-elling Radar Mount
Single mount for installing an additional GPS / VHF antenna above the radar. (1” by 14 tpi thread)
ORDERING INFO
LMB-A1 X10002-SCA Backstay Mount (aft mounted radar)
LM-GPS A80117 For all Leveller models
Backstay Mount (fore mounted radar)
Mast Mount
X10001-SCA
X10000-SCA
LMB-F1
LMM-F1
All compatible with RD418D / RD424D / RD418HD / RD424HD
ScanstrutItem Code
RaymarineItem Code
Description
2
RADOMES
ScanstrutItem Code
RaymarineItem Code
Description
Self-Levelling Radar Mount
RADAR OPEN ARRAY
Raymarine Marine Electronics
Scanstrut Products SATCOM GPS ANTENNA DISPLAYS INSTRUMENTS CAMERAS PAGE
Mast Mount
SC100 Pole Mount
PowerTower
Dual PowerTower
Electrical Accessories
With over 25 years experience, make Scanstrut an essential part of your Raymarine electronics installa-tion.
Fully endorsed and recommended by Raymarine, a selection of the best-selling Scanstrut range is stocked centrally and available to order from Raymarine dealers worldwide.
We offer a range of products to install the following:
Visit www.scanstrut.com for further product information and technical specifications.
Marine Electronics Mounts
We o�er a standard range of over 100 di�erent installation products to mount your Raymarine radar, satcom, MFD displays, instruments, cameras and GPS antennas onto yachts, powerboats, commercial and military vessels.
Electrical Accessories
Electronics and seawater are not the best of friends and it’s essential that your installation remains dry inside.
The Scanstrut range of Electrical Accessories will ensure you complete your marine electronics install in the best way possible.
Scanstrut Accessories
A range of Accessories is available for your Scanstrut installation. From mounting an additional light or GPS Antenna, to accessories which aid installation and performance.
2
3
4
5
6
11
Scanpod 8/9 ROKK 10 Camera Mounts 10
Satcom Antenna Mount 7
Tapered Mast 6
Product Guide
PRODUCTGUIDE
2015
ORDERING INFO
DS16-P A80123 Connectors up to ø16mm | Cables 2-8mm
DS21A-P A80124 Connectors up to ø21mm | Cables 4-9mm
DS21B-P A80125 Connectors up to ø21mm | Cables 9-14mm
DS30-P A80126 Connectors up to ø30mm | Cables 9-14mm
DS-MULTI A80127 Multiple cables up to ø18mm
ScanstrutItem Code
RaymarineItem Code
Description
Electronics and seawater are not the best of friends and it’s essential that your installation remains dry inside.
The Scanstrut range of Electrical Accessories will ensure you complete your marine electronics install in the best way possible.
Electrical Accessories
Deck Seals
The only guaranteed and proven watertight installation for your antenna and navlight cables.
Pass cables into the boat, anywhere on deck. No need to remove cable plug.
Low pro�le shape for a stronger, impact resistant seal. No sharp edges to hit your foot on!
Supplied with blank and pre-drilled inner seals.
Split seal eliminates need to remove cable connectors during install.
Captive nuts in base provide easy assembly and allow reliable repeat installations.
Designed to �t multiple cables up to 15mm dia. Supplied with undrilled seal and made from marine grade aluminum with hard anodised �nish to resist impact marks.
WATERPROOF GUARANTEEIPX6 & IPX7 Tested & Approved.
Junction Box
The ‘�t and forget’ Junction Box range is the perfect sailing accessory for anyone planning boat maintenance, providing secure, IP66 watertight connections for marine electrical cables onboard any boat.
Choice of ‘standard’ box with 5 screw-down terminals or a ‘deluxe’ version which includes 10 fast-�t terminals for a quicker install.
Fit directly to chosen surface. A mounting bracket is included to allow easy removal for inspection.
Upgrade to IP67 with a Cable Seal upgrade kit.
Multi Deck Seal
11
•
•
•
•
•
•
•
ORDERING INFO
SB-8-5 A80129 Standard Junction Box | 5 screw down terminals
SB-8-10 A80130 Deluxe Junction Box | 10 fast �t terminals
SB-2G A80128 Cable Seal Pack (x2)
ScanstrutItem Code
RaymarineItem Code
Description
Visit www.scanstrut.com for further information.
Camera Mounts
ORDERING INFO
CAM-PT-150 A80119 PowerTower* - 150mm height
CAM-MM-01 A80118 Mast Mount*
PowerTower* - 300mm heightA80120CAM-PT-300
*Compatible with M-Series, T-Series & Navigator
ScanstrutItem Code
RaymarineItem Code
Description
CAMERAS
Options for installing Raymarine thermal imaging cameras onto your power or sail boat for maximum visibility at all times.
Compact Mast Mount for installation onto yacht masts.
Same great features as our standard Mast Mount range (see page X).
Camera Mast MountRaise your Camera from the deck to ensure clear visibility at all times. Designed with a 30° aft leaning profile and a small base footprint.
Camera PowerTower
ORDERING INFO
RL-RM-RYM A80295
ScanstrutItem Code
RaymarineItem Code
Description
A multi position mount for small electronic devices onboard.
Install fishfinders and chartplotters at the helm, RIB console, fishing boat dashboard , nav station and more.
ROKKINSTRUMENTS DISPLAYS
Adjustable Deck Mount
Designed to be versatile. Mount anywhere onboard.
‘Set and forget’ system ensures zero loss of clamping force over time.
Locking design provides a rock solid platform and a high clamping force with minimal e�ort from user.
Engineered to withstand high shock loading.
Corrosion resistant alloy castings, anodised and powder coated for extreme marine durability.
Easily adjusted. Unlock, reposition, lock again.
360° of rotation. 136° of tilt.
10
•
•
•
•
•
• Same great features as our standard PowerTower range (see page X).
•
RL-ARM-RYM
RL-ADM-RYM
A80294
A80293
All Rokk Mounts for a6, a7, e7 & Dragon�y
Compatability
rail mount
adjustable rail mountadjustable deck mount
Deck Pod
Mast Pod
Rail Pod
ORDERING INFO
SPM-MAXI-C X10309 3 x ST70+ Maxi Instruments (Carbon)
SPM-3I-W A80106 3 x Std Instruments
SPM-4I-W A80149 4 x Std Instruments
SPM-2MAXI-W A80108 2 x ST70+ Maxi Instruments
SPM-MAXI-W A80109 3 x ST70+ Maxi Instruments
SPR-7-RM A80239 For a6 to e7 (Rail Mounted)
SPR-7-AM A80240 For a6 to e7 (Arm Mounted)
ScanstrutItem Code
RaymarineItem Code
Description
ORDERING INFO
ScanstrutItem Code
RaymarineItem Code
Description
ORDERING INFO
ScanstrutItem Code
RaymarineItem Code
Description
SPD-8D-W A80103 Up to 9” Displays
SPD-12D-W A80104 Up to 12” Displays
SPD-15D-W A80105 Up to 15” Displays
SPD-7-W-E7 A80185 For e7
SPD-8-W-E9 A80186 Pre-cut for e9 MFD
SPD-12-W-E12 A80187 Pre-cut for e12 MFD
SPD-4XI-W A80193 1 x e7 & 2 x i70
Options to installDesigned with options to install 7” displays or 1 standard instrument.
Arm Mounted
Extend the Pod away from narrow or crowded rails for better viewing. Designed to ensure the Pod is always positioned for best viewing whatever the angle of the rail. Cables are routed internally and accessed easily via a removable cover.
Rail Mounted
Fit your display onto standard and curved rails. Viewing angled can set upon installation. Cables are routed internally through clamp and into the rail.
Swivel & tilt baseOne handed quick release action. Simply release the lever, swivel and tilt to suit requirements before lockng back into position.
Best viewing angleAn adjustable ball joint allows range of movement and multiple mounting angles.
Added strengthAn inner bracing plate secures the Deck Pod base to the pod and gives increased rigidty to the assembly eliminating potential damage from shock and vibration.
Universal mountThe range has been designed to �t mast sizes from 76mm to 223mm. Mast arms pivot about semi circular washers and an additional cross-brace provides sti�ness preventing sideways movement.
Current sailboat designs often have very open cockpits with few options for installing retro-�t instruments. The new Arm and Rail Mount options allow smaller instruments and chartplotters to be rail mounted anywhere onboard.
Solve the challenge of �nding a level mounting surface to install your displays onto your powerboat, RIB or sailbot wheelhouse.
Using a one-handed quick release lever, simply release, swivel and tilt to suit your requirements before locking back into position.
Whether racing or cruising, our Mast Pods give you the best view of your instruments.
Mast arms pivot to provide a universal �t to a wide range of mast sizes. A cross-brace adds rigidity and prevents sideways movement of the pod.
•
•
•
•
•
Carb
on M
ast P
od
9
Scanpod
Helm Pod
INSTRUMENTS DISPLAYS
Great design and neat features ensure the Scanstrut Helm Pod is the perfect choice for all cockpit con�gurations.
Our unique ‘No-Drill’ clamping system provides a universal �t on any pedestal rail. A set of mounting saddles gives a secure, watertight �xture at the rear of the pod.
Universal helm �xingFits pedestal rails from 25mm to 33.7mm. Using a unique clamping system, the pod can �t rail widths from 178mm upwards.
No Drill �xing kitCustomised U-bolts �t around rail and through the saddles into the back of the pod eliminating the need for time consuming and awkward drilling of the stainless rail.
Secure & watertight installA saddle system supports the stainless tubing to allow a secure and rigid �t onto any pedestal and also ensures a watertight seal at cable entry.
8
The product of choice for leading boat builders World-
wide, the Scanpod range has gained an enviable reputation
for exceptional quality since its launch in 2009.
SPH-3I-W A80110 3 x Std Instruments
SPH-8D-W A80112 Up to 9” Displays
SPH-12D-W A80113 Up to 12” Displays
SPH-15D-W A80114 Up to 15” Displays
SPH-SYSTEM-W A80115 9” Display + 4 Std Instruments / 12” Display + 2 Std Instruments
SPH-8-W-E9 A80183 Pre-cut for e9 MFD
SPH-12-W-E12 A80184 Pre-cut for e12 MFD
SPH-4XI-W A80194 1 x e7 & 2 x i70
ORDERING INFO
ScanstrutItem Code
RaymarineItem Code
Description
•
•
•
• Single piece composite GRP moulding for high strength and corrosion resistance*.
• and antenna.
• and maintenance.
* Stainless steel mounts available to install larger KVH M9 & Intellian i9 antenna.
Satcom Antenna Mount
ORDERING INFO
SC35 X10021-SCA Fits 37STV
SC30 X10018-SCA Fits 33STV
Fits 45STVX10022-SCASC45R
SC65 X10023-SCA Fits 60STV
ScanstrutItem Code
RaymarineItem Code
Description
SATCOM/TV
Reduce the footprint size of your satcom antenna by up to 60% to give you greater choice when choosing where to install your satcom antenna.
Adjustable Base Wedge
Satcom antennas require a horizontal mounting surface to function correctly.
Satcom wedges eradicate this problem by providing a level mounting on slopes from 0° to 12°.
Simply counter rotate the angled discs until the top surface is horizontal.
TIP: Mounting on a curved arch? The Adjustable Base Wedge accessory will solve your problem and level your satcom installation.
7
ACCESSORIES AVAILABLE:
SC50 X10026-SCA Compatible with SC35, SC45R and SC65 only.
ScanstrutItem Code
RaymarineItem Code
Description
•
• Install up to 4 GPS/VHF antenna.
• Hollow wings and stem allow hidden cabling.
• Option available to mount additional 30cm/40cm satcom at the top of the mast.
Dual PowerTower
ORDERING INFO
DPT-SR1-30 X10014-SCA Radar* + 33STV/37STV
Radar* + 45STVX10015-SCADPT-SR1-40
DPT-S01-40 X10016-SCA Open array** + 45STV
ScanstrutItem Code
RaymarineItem Code
Description
ORDERING INFO
PTM-R1-1 A80147 Radar*
Radar* + 45STVA80148PTM-R1-S40
ScanstrutItem Code
RaymarineItem Code
Description
RADOMES OPEN ARRAY SATCOM/TV
Tapered Mast
Elevating the satcom antenna above the radar eliminates antenna interference and ensures maximum performance from both applications.
Single combination mount for multiple marine electronics. Each item is positioned for maximum performance.
Features an adjustable mounting plate to allow for variation in radome size.
Positions the radar as close as possible to the structural centre of gravity, ensuring minimal load is placed on the radar arch.
TIP: Ideal for smaller powerboats where mounting space is limited.
Compact Dual PowerTower
SATCOM/TVRADOMES
CAMERAS
GPS / VHF ANTENNA
LIGHTS
6
• Antenna fastens to PowerTower using own mounting bolts.
• Pre-drilled mounting holes for ease of installation.
• IP65 gland supplied to seal cable into stem for internal cable management.
• Watertight base seal included – no need for messy sealant.
*Compatible with RD418D / RD424D / RD418HD / RD424HD
**Compatible with RA1048D / RA3048HD / RA1048SHD / RA3048SHD
*Compatible with RD418D / RD424D / RD418HD / RD424HD
• Antenna fastens to PowerTower using own mounting bolts.
• Pre-drilled mounting holes for ease of installation.
• IP65 gland supplied to seal cable into stem for internal cable management.
• Watertight base seal included – no need for messy sealant.
Stronger for heavier equipment.
• White powder coated.
• 25° forward leaning (30° aft
leaning for open array).
• Choice of 130mm (5”) or 250mm (10”) heights.
Lightweight, suits any boat.
•
• 30° aft leaning.
• Choice of 150mm (6”) or 350mm (14”) heights.
Ideal for narrow RIB arches.
•
• 30° aft leaning.
• 150mm (6”) height.
PowerTower
ORDERING INFO
PT2001 X10012-SCA 350mm height | Composite
150mm height | CompositeX10013-SCAPT2004
SPT1001 A80121 150mm height | Stainless steel
130mm height | AluminiumA80122APT19000
ScanstrutItem Code
RaymarineItem Code
Description
RADOMES SATCOM/TV
Install your antenna on the cabin roof, flybridge or radar arch of your powerboat.
Aluminium Composite Stainless steel
Choice of material:
5
Nav Light and GPS / VHF Antenna Mount
Install Nav Light, GPS or VHF antennas above the radar for maximum visibility and performance.
Attach using radar mounting bolts, no extra fastenings required. (1” by 14 tpi thread)
ACCESSORIES AVAILABLE:
Compatible with RD418D / RD424D / RD418HD / RD424HDSC110 X10017-SCA For Nav Lights (Port mounted)
SC111 X10018-SCA For GPS / VHF Antenna (Starboard mounted)
SC112 X10019-SCA For GPS / VHF Antenna (Port mounted)
ScanstrutItem Code
RaymarineItem Code
Description
• 1.9m (6.4’) recommended for level deck mounting and 2.5m (8.3’) recommended for sloping transoms.
• Accommodates two cable channels with a cover strip to hold cables in place and out of view.
• Two support modules provide maximum fore / aft and sideways support.
• Unscrew base and remove pole for racing or winter storage, leaving just
Rail stand-o� Deck strut Adjustable base
SC100 Pole Mount
Nav Light and GPS / VHF Antenna Mount
Install Nav Light, GPS or VHF antennas above the radar for maximum visibility and performance.
Attach using radar mounting bolts, no extra fastenings required. (1” by 14 tpi thread)
ORDERING INFO
SC101 X10010-SCA 1.9m height SC100 Pole*
2.5m height SC100 Pole*X10011-SCASC102
4m Through Deck SC2 Pole**X10120-SCASC2-4
ScanstrutItem Code
RaymarineItem Code
Description
RADOMES SATCOM/TV
Versatile pole mount for deck or transom mounting. No customisation or adjustment required, it works straight from the box.
4
ACCESSORIES AVAILABLE:
*Compatible with RD418D / RD424D / RD418HD / RD424HD
**Compatible with RD418D / RD424D / RD418HD / RD424HD Use with SC45R for 45STV / with SC65 for 60STVSC110 X10017-SCA For Nav Lights (Port mounted)
SC111 X10018-SCA For GPS / VHF Antenna (Starboard mounted)
SC112 X10019-SCA For GPS / VHF Antenna (Port mounted)
ScanstrutItem Code
RaymarineItem Code
Description
• Attaches to mast with four swivel feet, matching a variety
•
•
• Safety wire kit independently attaches scanner to mast for additional protection.
Mast Mount
Radar Guard
Polished stainless guards protect radome from damage and reduce wear on the sails.
Mounted using radome bolts, no extra fastenings required.
ORDERING INFO
M92722 M92722 To �t RD418D / RD418HD
To �t RD424D / RD424HDM92698M92698
ScanstrutItem Code
RaymarineItem Code
Description
RADOMES SATCOM/TV
Still the first choice for boat owners Worldwide, Scanstrut leads the way with a new generation of Mast Mounts.
Stronger. Lighter. Easier to �t.
3
ACCESSORIES AVAILABLE:
SC27 X1006-SCA To �t M92722
ScanstrutItem Code
RaymarineItem Code
Description
• • Can be installed on both adjustable and split backstays.
• Options to mount radome fore or aft of backstay.
• 2.6m (8’6”) aluminium mounting pole – supplied in 2 lengths with hidden joiner piece.
• Can be deck, transom or chainplate mounted.
• Range of nylon bushes supplied. Clamps around backstay so cable tension can be adjusted.
Backstay Mounted Mast Mounted
•
TIP: When mounting radome forward of backstay, check clearance between radome and mainsail.
Self-Levelling Radar Mount
Beautifully styled and expertly engineered to ensure your radar stays level with the horizon at all times for optimum antenna performance.
As the boat heels or rolls, the radar is kept horizontal preventing target loss and giving the best possible radar picture.
Maintenance free & no power required.
Radome cradle with �ne tune adjustment for di�erent mast rake angles.
• Attaches to mast with four swivel feet, matching a variety of mast pro�les.
"Picture perfect radar performance."
As tested by
ACCESSORIES AVAILABLE:
GPS / VHF Antenna Mount for Self-Lev-elling Radar Mount
Single mount for installing an additional GPS / VHF antenna above the radar. (1” by 14 tpi thread)
ORDERING INFO
LMB-A1 X10002-SCA Backstay Mount (aft mounted radar)
LM-GPS A80117 For all Leveller models
Backstay Mount (fore mounted radar)
Mast Mount
X10001-SCA
X10000-SCA
LMB-F1
LMM-F1
All compatible with RD418D / RD424D / RD418HD / RD424HD
ScanstrutItem Code
RaymarineItem Code
Description
2
RADOMES
ScanstrutItem Code
RaymarineItem Code
Description
Self-Levelling Radar Mount
RADAR OPEN ARRAY
Raymarine Marine Electronics
Scanstrut Products SATCOM GPS ANTENNA DISPLAYS INSTRUMENTS CAMERAS PAGE
Mast Mount
SC100 Pole Mount
PowerTower
Dual PowerTower
Electrical Accessories
With over 25 years experience, make Scanstrut an essential part of your Raymarine electronics installa-tion.
Fully endorsed and recommended by Raymarine, a selection of the best-selling Scanstrut range is stocked centrally and available to order from Raymarine dealers worldwide.
We offer a range of products to install the following:
Visit www.scanstrut.com for further product information and technical specifications.
Marine Electronics Mounts
We o�er a standard range of over 100 di�erent installation products to mount your Raymarine radar, satcom, MFD displays, instruments, cameras and GPS antennas onto yachts, powerboats, commercial and military vessels.
Electrical Accessories
Electronics and seawater are not the best of friends and it’s essential that your installation remains dry inside.
The Scanstrut range of Electrical Accessories will ensure you complete your marine electronics install in the best way possible.
Scanstrut Accessories
A range of Accessories is available for your Scanstrut installation. From mounting an additional light or GPS Antenna, to accessories which aid installation and performance.
2
3
4
5
6
11
Scanpod 8/9 ROKK 10 Camera Mounts 10
Satcom Antenna Mount 7
Tapered Mast 6
Product Guide
PRODUCTGUIDE
2015
ORDERING INFO
DS16-P A80123 Connectors up to ø16mm | Cables 2-8mm
DS21A-P A80124 Connectors up to ø21mm | Cables 4-9mm
DS21B-P A80125 Connectors up to ø21mm | Cables 9-14mm
DS30-P A80126 Connectors up to ø30mm | Cables 9-14mm
DS-MULTI A80127 Multiple cables up to ø18mm
ScanstrutItem Code
RaymarineItem Code
Description
Electronics and seawater are not the best of friends and it’s essential that your installation remains dry inside.
The Scanstrut range of Electrical Accessories will ensure you complete your marine electronics install in the best way possible.
Electrical Accessories
Deck Seals
The only guaranteed and proven watertight installation for your antenna and navlight cables.
Pass cables into the boat, anywhere on deck. No need to remove cable plug.
Low pro�le shape for a stronger, impact resistant seal. No sharp edges to hit your foot on!
Supplied with blank and pre-drilled inner seals.
Split seal eliminates need to remove cable connectors during install.
Captive nuts in base provide easy assembly and allow reliable repeat installations.
Designed to �t multiple cables up to 15mm dia. Supplied with undrilled seal and made from marine grade aluminum with hard anodised �nish to resist impact marks.
WATERPROOF GUARANTEEIPX6 & IPX7 Tested & Approved.
Junction Box
The ‘�t and forget’ Junction Box range is the perfect sailing accessory for anyone planning boat maintenance, providing secure, IP66 watertight connections for marine electrical cables onboard any boat.
Choice of ‘standard’ box with 5 screw-down terminals or a ‘deluxe’ version which includes 10 fast-�t terminals for a quicker install.
Fit directly to chosen surface. A mounting bracket is included to allow easy removal for inspection.
Upgrade to IP67 with a Cable Seal upgrade kit.
Multi Deck Seal
11
•
•
•
•
•
•
•
ORDERING INFO
SB-8-5 A80129 Standard Junction Box | 5 screw down terminals
SB-8-10 A80130 Deluxe Junction Box | 10 fast �t terminals
SB-2G A80128 Cable Seal Pack (x2)
ScanstrutItem Code
RaymarineItem Code
Description
Visit www.scanstrut.com for further information.
Camera Mounts
ORDERING INFO
CAM-PT-150 A80119 PowerTower* - 150mm height
CAM-MM-01 A80118 Mast Mount*
PowerTower* - 300mm heightA80120CAM-PT-300
*Compatible with M-Series, T-Series & Navigator
ScanstrutItem Code
RaymarineItem Code
Description
CAMERAS
Options for installing Raymarine thermal imaging cameras onto your power or sail boat for maximum visibility at all times.
Compact Mast Mount for installation onto yacht masts.
Same great features as our standard Mast Mount range (see page X).
Camera Mast MountRaise your Camera from the deck to ensure clear visibility at all times. Designed with a 30° aft leaning profile and a small base footprint.
Camera PowerTower
ORDERING INFO
RL-RM-RYM A80295
ScanstrutItem Code
RaymarineItem Code
Description
A multi position mount for small electronic devices onboard.
Install fishfinders and chartplotters at the helm, RIB console, fishing boat dashboard , nav station and more.
ROKKINSTRUMENTS DISPLAYS
Adjustable Deck Mount
Designed to be versatile. Mount anywhere onboard.
‘Set and forget’ system ensures zero loss of clamping force over time.
Locking design provides a rock solid platform and a high clamping force with minimal e�ort from user.
Engineered to withstand high shock loading.
Corrosion resistant alloy castings, anodised and powder coated for extreme marine durability.
Easily adjusted. Unlock, reposition, lock again.
360° of rotation. 136° of tilt.
10
•
•
•
•
•
• Same great features as our standard PowerTower range (see page X).
•
RL-ARM-RYM
RL-ADM-RYM
A80294
A80293
All Rokk Mounts for a6, a7, e7 & Dragon�y
Compatability
rail mount
adjustable rail mountadjustable deck mount
Deck Pod
Mast Pod
Rail Pod
ORDERING INFO
SPM-MAXI-C X10309 3 x ST70+ Maxi Instruments (Carbon)
SPM-3I-W A80106 3 x Std Instruments
SPM-4I-W A80149 4 x Std Instruments
SPM-2MAXI-W A80108 2 x ST70+ Maxi Instruments
SPM-MAXI-W A80109 3 x ST70+ Maxi Instruments
SPR-7-RM A80239 For a6 to e7 (Rail Mounted)
SPR-7-AM A80240 For a6 to e7 (Arm Mounted)
ScanstrutItem Code
RaymarineItem Code
Description
ORDERING INFO
ScanstrutItem Code
RaymarineItem Code
Description
ORDERING INFO
ScanstrutItem Code
RaymarineItem Code
Description
SPD-8D-W A80103 Up to 9” Displays
SPD-12D-W A80104 Up to 12” Displays
SPD-15D-W A80105 Up to 15” Displays
SPD-7-W-E7 A80185 For e7
SPD-8-W-E9 A80186 Pre-cut for e9 MFD
SPD-12-W-E12 A80187 Pre-cut for e12 MFD
SPD-4XI-W A80193 1 x e7 & 2 x i70
Options to installDesigned with options to install 7” displays or 1 standard instrument.
Arm Mounted
Extend the Pod away from narrow or crowded rails for better viewing. Designed to ensure the Pod is always positioned for best viewing whatever the angle of the rail. Cables are routed internally and accessed easily via a removable cover.
Rail Mounted
Fit your display onto standard and curved rails. Viewing angled can set upon installation. Cables are routed internally through clamp and into the rail.
Swivel & tilt baseOne handed quick release action. Simply release the lever, swivel and tilt to suit requirements before lockng back into position.
Best viewing angleAn adjustable ball joint allows range of movement and multiple mounting angles.
Added strengthAn inner bracing plate secures the Deck Pod base to the pod and gives increased rigidty to the assembly eliminating potential damage from shock and vibration.
Universal mountThe range has been designed to �t mast sizes from 76mm to 223mm. Mast arms pivot about semi circular washers and an additional cross-brace provides sti�ness preventing sideways movement.
Current sailboat designs often have very open cockpits with few options for installing retro-�t instruments. The new Arm and Rail Mount options allow smaller instruments and chartplotters to be rail mounted anywhere onboard.
Solve the challenge of �nding a level mounting surface to install your displays onto your powerboat, RIB or sailbot wheelhouse.
Using a one-handed quick release lever, simply release, swivel and tilt to suit your requirements before locking back into position.
Whether racing or cruising, our Mast Pods give you the best view of your instruments.
Mast arms pivot to provide a universal �t to a wide range of mast sizes. A cross-brace adds rigidity and prevents sideways movement of the pod.
•
•
•
•
•
Carb
on M
ast P
od
9
Scanpod
Helm Pod
INSTRUMENTS DISPLAYS
Great design and neat features ensure the Scanstrut Helm Pod is the perfect choice for all cockpit con�gurations.
Our unique ‘No-Drill’ clamping system provides a universal �t on any pedestal rail. A set of mounting saddles gives a secure, watertight �xture at the rear of the pod.
Universal helm �xingFits pedestal rails from 25mm to 33.7mm. Using a unique clamping system, the pod can �t rail widths from 178mm upwards.
No Drill �xing kitCustomised U-bolts �t around rail and through the saddles into the back of the pod eliminating the need for time consuming and awkward drilling of the stainless rail.
Secure & watertight installA saddle system supports the stainless tubing to allow a secure and rigid �t onto any pedestal and also ensures a watertight seal at cable entry.
8
The product of choice for leading boat builders World-
wide, the Scanpod range has gained an enviable reputation
for exceptional quality since its launch in 2009.
SPH-3I-W A80110 3 x Std Instruments
SPH-8D-W A80112 Up to 9” Displays
SPH-12D-W A80113 Up to 12” Displays
SPH-15D-W A80114 Up to 15” Displays
SPH-SYSTEM-W A80115 9” Display + 4 Std Instruments / 12” Display + 2 Std Instruments
SPH-8-W-E9 A80183 Pre-cut for e9 MFD
SPH-12-W-E12 A80184 Pre-cut for e12 MFD
SPH-4XI-W A80194 1 x e7 & 2 x i70
ORDERING INFO
ScanstrutItem Code
RaymarineItem Code
Description
•
•
•
• Single piece composite GRP moulding for high strength and corrosion resistance*.
• and antenna.
• and maintenance.
* Stainless steel mounts available to install larger KVH M9 & Intellian i9 antenna.
Satcom Antenna Mount
ORDERING INFO
SC35 X10021-SCA Fits 37STV
SC30 X10018-SCA Fits 33STV
Fits 45STVX10022-SCASC45R
SC65 X10023-SCA Fits 60STV
ScanstrutItem Code
RaymarineItem Code
Description
SATCOM/TV
Reduce the footprint size of your satcom antenna by up to 60% to give you greater choice when choosing where to install your satcom antenna.
Adjustable Base Wedge
Satcom antennas require a horizontal mounting surface to function correctly.
Satcom wedges eradicate this problem by providing a level mounting on slopes from 0° to 12°.
Simply counter rotate the angled discs until the top surface is horizontal.
TIP: Mounting on a curved arch? The Adjustable Base Wedge accessory will solve your problem and level your satcom installation.
7
ACCESSORIES AVAILABLE:
SC50 X10026-SCA Compatible with SC35, SC45R and SC65 only.
ScanstrutItem Code
RaymarineItem Code
Description
•
• Install up to 4 GPS/VHF antenna.
• Hollow wings and stem allow hidden cabling.
• Option available to mount additional 30cm/40cm satcom at the top of the mast.
Dual PowerTower
ORDERING INFO
DPT-SR1-30 X10014-SCA Radar* + 33STV/37STV
Radar* + 45STVX10015-SCADPT-SR1-40
DPT-S01-40 X10016-SCA Open array** + 45STV
ScanstrutItem Code
RaymarineItem Code
Description
ORDERING INFO
PTM-R1-1 A80147 Radar*
Radar* + 45STVA80148PTM-R1-S40
ScanstrutItem Code
RaymarineItem Code
Description
RADOMES OPEN ARRAY SATCOM/TV
Tapered Mast
Elevating the satcom antenna above the radar eliminates antenna interference and ensures maximum performance from both applications.
Single combination mount for multiple marine electronics. Each item is positioned for maximum performance.
Features an adjustable mounting plate to allow for variation in radome size.
Positions the radar as close as possible to the structural centre of gravity, ensuring minimal load is placed on the radar arch.
TIP: Ideal for smaller powerboats where mounting space is limited.
Compact Dual PowerTower
SATCOM/TVRADOMES
CAMERAS
GPS / VHF ANTENNA
LIGHTS
6
• Antenna fastens to PowerTower using own mounting bolts.
• Pre-drilled mounting holes for ease of installation.
• IP65 gland supplied to seal cable into stem for internal cable management.
• Watertight base seal included – no need for messy sealant.
*Compatible with RD418D / RD424D / RD418HD / RD424HD
**Compatible with RA1048D / RA3048HD / RA1048SHD / RA3048SHD
*Compatible with RD418D / RD424D / RD418HD / RD424HD
• Antenna fastens to PowerTower using own mounting bolts.
• Pre-drilled mounting holes for ease of installation.
• IP65 gland supplied to seal cable into stem for internal cable management.
• Watertight base seal included – no need for messy sealant.
Stronger for heavier equipment.
• White powder coated.
• 25° forward leaning (30° aft
leaning for open array).
• Choice of 130mm (5”) or 250mm (10”) heights.
Lightweight, suits any boat.
•
• 30° aft leaning.
• Choice of 150mm (6”) or 350mm (14”) heights.
Ideal for narrow RIB arches.
•
• 30° aft leaning.
• 150mm (6”) height.
PowerTower
ORDERING INFO
PT2001 X10012-SCA 350mm height | Composite
150mm height | CompositeX10013-SCAPT2004
SPT1001 A80121 150mm height | Stainless steel
130mm height | AluminiumA80122APT19000
ScanstrutItem Code
RaymarineItem Code
Description
RADOMES SATCOM/TV
Install your antenna on the cabin roof, flybridge or radar arch of your powerboat.
Aluminium Composite Stainless steel
Choice of material:
5
Nav Light and GPS / VHF Antenna Mount
Install Nav Light, GPS or VHF antennas above the radar for maximum visibility and performance.
Attach using radar mounting bolts, no extra fastenings required. (1” by 14 tpi thread)
ACCESSORIES AVAILABLE:
Compatible with RD418D / RD424D / RD418HD / RD424HDSC110 X10017-SCA For Nav Lights (Port mounted)
SC111 X10018-SCA For GPS / VHF Antenna (Starboard mounted)
SC112 X10019-SCA For GPS / VHF Antenna (Port mounted)
ScanstrutItem Code
RaymarineItem Code
Description
• 1.9m (6.4’) recommended for level deck mounting and 2.5m (8.3’) recommended for sloping transoms.
• Accommodates two cable channels with a cover strip to hold cables in place and out of view.
• Two support modules provide maximum fore / aft and sideways support.
• Unscrew base and remove pole for racing or winter storage, leaving just
Rail stand-o� Deck strut Adjustable base
SC100 Pole Mount
Nav Light and GPS / VHF Antenna Mount
Install Nav Light, GPS or VHF antennas above the radar for maximum visibility and performance.
Attach using radar mounting bolts, no extra fastenings required. (1” by 14 tpi thread)
ORDERING INFO
SC101 X10010-SCA 1.9m height SC100 Pole*
2.5m height SC100 Pole*X10011-SCASC102
4m Through Deck SC2 Pole**X10120-SCASC2-4
ScanstrutItem Code
RaymarineItem Code
Description
RADOMES SATCOM/TV
Versatile pole mount for deck or transom mounting. No customisation or adjustment required, it works straight from the box.
4
ACCESSORIES AVAILABLE:
*Compatible with RD418D / RD424D / RD418HD / RD424HD
**Compatible with RD418D / RD424D / RD418HD / RD424HD Use with SC45R for 45STV / with SC65 for 60STVSC110 X10017-SCA For Nav Lights (Port mounted)
SC111 X10018-SCA For GPS / VHF Antenna (Starboard mounted)
SC112 X10019-SCA For GPS / VHF Antenna (Port mounted)
ScanstrutItem Code
RaymarineItem Code
Description
• Attaches to mast with four swivel feet, matching a variety
•
•
• Safety wire kit independently attaches scanner to mast for additional protection.
Mast Mount
Radar Guard
Polished stainless guards protect radome from damage and reduce wear on the sails.
Mounted using radome bolts, no extra fastenings required.
ORDERING INFO
M92722 M92722 To �t RD418D / RD418HD
To �t RD424D / RD424HDM92698M92698
ScanstrutItem Code
RaymarineItem Code
Description
RADOMES SATCOM/TV
Still the first choice for boat owners Worldwide, Scanstrut leads the way with a new generation of Mast Mounts.
Stronger. Lighter. Easier to �t.
3
ACCESSORIES AVAILABLE:
SC27 X1006-SCA To �t M92722
ScanstrutItem Code
RaymarineItem Code
Description
• • Can be installed on both adjustable and split backstays.
• Options to mount radome fore or aft of backstay.
• 2.6m (8’6”) aluminium mounting pole – supplied in 2 lengths with hidden joiner piece.
• Can be deck, transom or chainplate mounted.
• Range of nylon bushes supplied. Clamps around backstay so cable tension can be adjusted.
Backstay Mounted Mast Mounted
•
TIP: When mounting radome forward of backstay, check clearance between radome and mainsail.
Self-Levelling Radar Mount
Beautifully styled and expertly engineered to ensure your radar stays level with the horizon at all times for optimum antenna performance.
As the boat heels or rolls, the radar is kept horizontal preventing target loss and giving the best possible radar picture.
Maintenance free & no power required.
Radome cradle with �ne tune adjustment for di�erent mast rake angles.
• Attaches to mast with four swivel feet, matching a variety of mast pro�les.
"Picture perfect radar performance."
As tested by
ACCESSORIES AVAILABLE:
GPS / VHF Antenna Mount for Self-Lev-elling Radar Mount
Single mount for installing an additional GPS / VHF antenna above the radar. (1” by 14 tpi thread)
ORDERING INFO
LMB-A1 X10002-SCA Backstay Mount (aft mounted radar)
LM-GPS A80117 For all Leveller models
Backstay Mount (fore mounted radar)
Mast Mount
X10001-SCA
X10000-SCA
LMB-F1
LMM-F1
All compatible with RD418D / RD424D / RD418HD / RD424HD
ScanstrutItem Code
RaymarineItem Code
Description
2
RADOMES
ScanstrutItem Code
RaymarineItem Code
Description
Self-Levelling Radar Mount
RADAR OPEN ARRAY
Raymarine Marine Electronics
Scanstrut Products SATCOM GPS ANTENNA DISPLAYS INSTRUMENTS CAMERAS PAGE
Mast Mount
SC100 Pole Mount
PowerTower
Dual PowerTower
Electrical Accessories
With over 25 years experience, make Scanstrut an essential part of your Raymarine electronics installa-tion.
Fully endorsed and recommended by Raymarine, a selection of the best-selling Scanstrut range is stocked centrally and available to order from Raymarine dealers worldwide.
We offer a range of products to install the following:
Visit www.scanstrut.com for further product information and technical specifications.
Marine Electronics Mounts
We o�er a standard range of over 100 di�erent installation products to mount your Raymarine radar, satcom, MFD displays, instruments, cameras and GPS antennas onto yachts, powerboats, commercial and military vessels.
Electrical Accessories
Electronics and seawater are not the best of friends and it’s essential that your installation remains dry inside.
The Scanstrut range of Electrical Accessories will ensure you complete your marine electronics install in the best way possible.
Scanstrut Accessories
A range of Accessories is available for your Scanstrut installation. From mounting an additional light or GPS Antenna, to accessories which aid installation and performance.
2
3
4
5
6
11
Scanpod 8/9 ROKK 10 Camera Mounts 10
Satcom Antenna Mount 7
Tapered Mast 6
Product Guide
PRODUCTGUIDE
2015
ORDERING INFO
DS16-P A80123 Connectors up to ø16mm | Cables 2-8mm
DS21A-P A80124 Connectors up to ø21mm | Cables 4-9mm
DS21B-P A80125 Connectors up to ø21mm | Cables 9-14mm
DS30-P A80126 Connectors up to ø30mm | Cables 9-14mm
DS-MULTI A80127 Multiple cables up to ø18mm
ScanstrutItem Code
RaymarineItem Code
Description
Electronics and seawater are not the best of friends and it’s essential that your installation remains dry inside.
The Scanstrut range of Electrical Accessories will ensure you complete your marine electronics install in the best way possible.
Electrical Accessories
Deck Seals
The only guaranteed and proven watertight installation for your antenna and navlight cables.
Pass cables into the boat, anywhere on deck. No need to remove cable plug.
Low pro�le shape for a stronger, impact resistant seal. No sharp edges to hit your foot on!
Supplied with blank and pre-drilled inner seals.
Split seal eliminates need to remove cable connectors during install.
Captive nuts in base provide easy assembly and allow reliable repeat installations.
Designed to �t multiple cables up to 15mm dia. Supplied with undrilled seal and made from marine grade aluminum with hard anodised �nish to resist impact marks.
WATERPROOF GUARANTEEIPX6 & IPX7 Tested & Approved.
Junction Box
The ‘�t and forget’ Junction Box range is the perfect sailing accessory for anyone planning boat maintenance, providing secure, IP66 watertight connections for marine electrical cables onboard any boat.
Choice of ‘standard’ box with 5 screw-down terminals or a ‘deluxe’ version which includes 10 fast-�t terminals for a quicker install.
Fit directly to chosen surface. A mounting bracket is included to allow easy removal for inspection.
Upgrade to IP67 with a Cable Seal upgrade kit.
Multi Deck Seal
11
•
•
•
•
•
•
•
ORDERING INFO
SB-8-5 A80129 Standard Junction Box | 5 screw down terminals
SB-8-10 A80130 Deluxe Junction Box | 10 fast �t terminals
SB-2G A80128 Cable Seal Pack (x2)
ScanstrutItem Code
RaymarineItem Code
Description
Visit www.scanstrut.com for further information.
Camera Mounts
ORDERING INFO
CAM-PT-150 A80119 PowerTower* - 150mm height
CAM-MM-01 A80118 Mast Mount*
PowerTower* - 300mm heightA80120CAM-PT-300
*Compatible with M-Series, T-Series & Navigator
ScanstrutItem Code
RaymarineItem Code
Description
CAMERAS
Options for installing Raymarine thermal imaging cameras onto your power or sail boat for maximum visibility at all times.
Compact Mast Mount for installation onto yacht masts.
Same great features as our standard Mast Mount range (see page X).
Camera Mast MountRaise your Camera from the deck to ensure clear visibility at all times. Designed with a 30° aft leaning profile and a small base footprint.
Camera PowerTower
ORDERING INFO
RL-RM-RYM A80295
ScanstrutItem Code
RaymarineItem Code
Description
A multi position mount for small electronic devices onboard.
Install fishfinders and chartplotters at the helm, RIB console, fishing boat dashboard , nav station and more.
ROKKINSTRUMENTS DISPLAYS
Adjustable Deck and Rail Mount
Designed to be versatile. Mount anywhere onboard.
‘Set and forget’ system ensures zero loss of clamping force over time.
Locking design provides a rock solid platform and a high clamping force with minimal e�ort from user.
Engineered to withstand high shock loading.
Corrosion resistant alloy castings, anodised and powder coated for extreme marine durability.
Easily adjusted. Unlock, reposition, lock again.
360° of rotation. 136° of tilt.
10
•
•
•
•
•
• Same great features as our standard PowerTower range (see page X).
•
RL-ARM-RYM
RL-ADM-RYM
A80294
A80293
All Rokk Mounts for a6, a7, e7 & Dragon�y
Compatability
rail mount
adjustable rail mountadjustable deck mount
Deck Pod
Mast Pod
Rail Pod
ORDERING INFO
SPM-MAXI-C X10309 3 x ST70+ Maxi Instruments (Carbon)
SPM-3I-W A80106 3 x Std Instruments
SPM-4I-W A80149 4 x Std Instruments
SPM-2MAXI-W A80108 2 x ST70+ Maxi Instruments
SPM-MAXI-W A80109 3 x ST70+ Maxi Instruments
SPR-7-RM A80239 For a6 to e7 (Rail Mounted)
SPR-7-AM A80240 For a6 to e7 (Arm Mounted)
ScanstrutItem Code
RaymarineItem Code
Description
ORDERING INFO
ScanstrutItem Code
RaymarineItem Code
Description
ORDERING INFO
ScanstrutItem Code
RaymarineItem Code
Description
SPD-8D-W A80103 Up to 9” Displays
SPD-12D-W A80104 Up to 12” Displays
SPD-15D-W A80105 Up to 15” Displays
SPD-7-W-E7 A80185 For e7
SPD-8-W-E9 A80186 Pre-cut for e9 MFD
SPD-12-W-E12 A80187 Pre-cut for e12 MFD
SPD-4XI-W A80193 1 x e7 & 2 x i70
Options to installDesigned with options to install 7” displays or 1 standard instrument.
Arm Mounted
Extend the Pod away from narrow or crowded rails for better viewing. Designed to ensure the Pod is always positioned for best viewing whatever the angle of the rail. Cables are routed internally and accessed easily via a removable cover.
Rail Mounted
Fit your display onto standard and curved rails. Viewing angled can set upon installation. Cables are routed internally through clamp and into the rail.
Swivel & tilt baseOne handed quick release action. Simply release the lever, swivel and tilt to suit requirements before lockng back into position.
Best viewing angleAn adjustable ball joint allows range of movement and multiple mounting angles.
Added strengthAn inner bracing plate secures the Deck Pod base to the pod and gives increased rigidty to the assembly eliminating potential damage from shock and vibration.
Universal mountThe range has been designed to �t mast sizes from 76mm to 223mm. Mast arms pivot about semi circular washers and an additional cross-brace provides sti�ness preventing sideways movement.
Current sailboat designs often have very open cockpits with few options for installing retro-�t instruments. The new Arm and Rail Mount options allow smaller instruments and chartplotters to be rail mounted anywhere onboard.
Solve the challenge of �nding a level mounting surface to install your displays onto your powerboat, RIB or sailbot wheelhouse.
Using a one-handed quick release lever, simply release, swivel and tilt to suit your requirements before locking back into position.
Whether racing or cruising, our Mast Pods give you the best view of your instruments.
Mast arms pivot to provide a universal �t to a wide range of mast sizes. A cross-brace adds rigidity and prevents sideways movement of the pod.
•
•
•
•
•
Carb
on M
ast P
od
9
Scanpod
Helm Pod
INSTRUMENTS DISPLAYS
Great design and neat features ensure the Scanstrut Helm Pod is the perfect choice for all cockpit con�gurations.
Our unique ‘No-Drill’ clamping system provides a universal �t on any pedestal rail. A set of mounting saddles gives a secure, watertight �xture at the rear of the pod.
Universal helm �xingFits pedestal rails from 25mm to 33.7mm. Using a unique clamping system, the pod can �t rail widths from 178mm upwards.
No Drill �xing kitCustomised U-bolts �t around rail and through the saddles into the back of the pod eliminating the need for time consuming and awkward drilling of the stainless rail.
Secure & watertight installA saddle system supports the stainless tubing to allow a secure and rigid �t onto any pedestal and also ensures a watertight seal at cable entry.
8
The product of choice for leading boat builders World-
wide, the Scanpod range has gained an enviable reputation
for exceptional quality since its launch in 2009.
SPH-3I-W A80110 3 x Std Instruments
SPH-8D-W A80112 Up to 9” Displays
SPH-12D-W A80113 Up to 12” Displays
SPH-15D-W A80114 Up to 15” Displays
SPH-SYSTEM-W A80115 9” Display + 4 Std Instruments / 12” Display + 2 Std Instruments
SPH-8-W-E9 A80183 Pre-cut for e9 MFD
SPH-12-W-E12 A80184 Pre-cut for e12 MFD
SPH-4XI-W A80194 1 x e7 & 2 x i70
ORDERING INFO
ScanstrutItem Code
RaymarineItem Code
Description
•
•
•
• Single piece composite GRP moulding for high strength and corrosion resistance*.
• and antenna.
• and maintenance.
* Stainless steel mounts available to install larger KVH M9 & Intellian i9 antenna.
Satcom Antenna Mount
ORDERING INFO
SC35 X10021-SCA Fits 37STV
SC30 X10018-SCA Fits 33STV
Fits 45STVX10022-SCASC45R
SC65 X10023-SCA Fits 60STV
ScanstrutItem Code
RaymarineItem Code
Description
SATCOM/TV
Reduce the footprint size of your satcom antenna by up to 60% to give you greater choice when choosing where to install your satcom antenna.
Adjustable Base Wedge
Satcom antennas require a horizontal mounting surface to function correctly.
Satcom wedges eradicate this problem by providing a level mounting on slopes from 0° to 12°.
Simply counter rotate the angled discs until the top surface is horizontal.
TIP: Mounting on a curved arch? The Adjustable Base Wedge accessory will solve your problem and level your satcom installation.
7
ACCESSORIES AVAILABLE:
SC50 X10026-SCA Compatible with SC35, SC45R and SC65 only.
ScanstrutItem Code
RaymarineItem Code
Description
•
• Install up to 4 GPS/VHF antenna.
• Hollow wings and stem allow hidden cabling.
• Option available to mount additional 30cm/40cm satcom at the top of the mast.
Dual PowerTower
ORDERING INFO
DPT-SR1-30 X10014-SCA Radar* + 33STV/37STV
Radar* + 45STVX10015-SCADPT-SR1-40
DPT-S01-40 X10016-SCA Open array** + 45STV
ScanstrutItem Code
RaymarineItem Code
Description
ORDERING INFO
PTM-R1-1 A80147 Radar*
Radar* + 45STVA80148PTM-R1-S40
ScanstrutItem Code
RaymarineItem Code
Description
RADOMES OPEN ARRAY SATCOM/TV
Tapered Mast
Elevating the satcom antenna above the radar eliminates antenna interference and ensures maximum performance from both applications.
Single combination mount for multiple marine electronics. Each item is positioned for maximum performance.
Features an adjustable mounting plate to allow for variation in radome size.
Positions the radar as close as possible to the structural centre of gravity, ensuring minimal load is placed on the radar arch.
TIP: Ideal for smaller powerboats where mounting space is limited.
Compact Dual PowerTower
SATCOM/TVRADOMES
CAMERAS
GPS / VHF ANTENNA
LIGHTS
6
• Antenna fastens to PowerTower using own mounting bolts.
• Pre-drilled mounting holes for ease of installation.
• IP65 gland supplied to seal cable into stem for internal cable management.
• Watertight base seal included – no need for messy sealant.
*Compatible with RD418D / RD424D / RD418HD / RD424HD
**Compatible with RA1048D / RA3048HD / RA1048SHD / RA3048SHD
*Compatible with RD418D / RD424D / RD418HD / RD424HD
• Antenna fastens to PowerTower using own mounting bolts.
• Pre-drilled mounting holes for ease of installation.
• IP65 gland supplied to seal cable into stem for internal cable management.
• Watertight base seal included – no need for messy sealant.
Stronger for heavier equipment.
• White powder coated.
• 25° forward leaning (30° aft
leaning for open array).
• Choice of 130mm (5”) or 250mm (10”) heights.
Lightweight, suits any boat.
•
• 30° aft leaning.
• Choice of 150mm (6”) or 350mm (14”) heights.
Ideal for narrow RIB arches.
•
• 30° aft leaning.
• 150mm (6”) height.
PowerTower
ORDERING INFO
PT2001 X10012-SCA 350mm height | Composite
150mm height | CompositeX10013-SCAPT2004
SPT1001 A80121 150mm height | Stainless steel
130mm height | AluminiumA80122APT19000
ScanstrutItem Code
RaymarineItem Code
Description
RADOMES SATCOM/TV
Install your antenna on the cabin roof, flybridge or radar arch of your powerboat.
Aluminium Composite Stainless steel
Choice of material:
5
Nav Light and GPS / VHF Antenna Mount
Install Nav Light, GPS or VHF antennas above the radar for maximum visibility and performance.
Attach using radar mounting bolts, no extra fastenings required. (1” by 14 tpi thread)
ACCESSORIES AVAILABLE:
Compatible with RD418D / RD424D / RD418HD / RD424HDSC110 X10017-SCA For Nav Lights (Port mounted)
SC111 X10018-SCA For GPS / VHF Antenna (Starboard mounted)
SC112 X10019-SCA For GPS / VHF Antenna (Port mounted)
ScanstrutItem Code
RaymarineItem Code
Description
• 1.9m (6.4’) recommended for level deck mounting and 2.5m (8.3’) recommended for sloping transoms.
• Accommodates two cable channels with a cover strip to hold cables in place and out of view.
• Two support modules provide maximum fore / aft and sideways support.
• Unscrew base and remove pole for racing or winter storage, leaving just
Rail stand-o� Deck strut Adjustable base
SC100 Pole Mount
Nav Light and GPS / VHF Antenna Mount
Install Nav Light, GPS or VHF antennas above the radar for maximum visibility and performance.
Attach using radar mounting bolts, no extra fastenings required. (1” by 14 tpi thread)
ORDERING INFO
SC101 X10010-SCA 1.9m height SC100 Pole*
2.5m height SC100 Pole*X10011-SCASC102
4m Through Deck SC2 Pole**X10120-SCASC2-4
ScanstrutItem Code
RaymarineItem Code
Description
RADOMES SATCOM/TV
Versatile pole mount for deck or transom mounting. No customisation or adjustment required, it works straight from the box.
4
ACCESSORIES AVAILABLE:
*Compatible with RD418D / RD424D / RD418HD / RD424HD
**Compatible with RD418D / RD424D / RD418HD / RD424HD Use with SC45R for 45STV / with SC65 for 60STVSC110 X10017-SCA For Nav Lights (Port mounted)
SC111 X10018-SCA For GPS / VHF Antenna (Starboard mounted)
SC112 X10019-SCA For GPS / VHF Antenna (Port mounted)
ScanstrutItem Code
RaymarineItem Code
Description
• Attaches to mast with four swivel feet, matching a variety
•
•
• Safety wire kit independently attaches scanner to mast for additional protection.
Mast Mount
Radar Guard
Polished stainless guards protect radome from damage and reduce wear on the sails.
Mounted using radome bolts, no extra fastenings required.
ORDERING INFO
M92722 M92722 To �t RD418D / RD418HD
To �t RD424D / RD424HDM92698M92698
ScanstrutItem Code
RaymarineItem Code
Description
RADOMES SATCOM/TV
Still the first choice for boat owners Worldwide, Scanstrut leads the way with a new generation of Mast Mounts.
Stronger. Lighter. Easier to �t.
3
ACCESSORIES AVAILABLE:
SC27 X1006-SCA To �t M92722
ScanstrutItem Code
RaymarineItem Code
Description
• • Can be installed on both adjustable and split backstays.
• Options to mount radome fore or aft of backstay.
• 2.6m (8’6”) aluminium mounting pole – supplied in 2 lengths with hidden joiner piece.
• Can be deck, transom or chainplate mounted.
• Range of nylon bushes supplied. Clamps around backstay so cable tension can be adjusted.
Backstay Mounted Mast Mounted
•
TIP: When mounting radome forward of backstay, check clearance between radome and mainsail.
Self-Levelling Radar Mount
Beautifully styled and expertly engineered to ensure your radar stays level with the horizon at all times for optimum antenna performance.
As the boat heels or rolls, the radar is kept horizontal preventing target loss and giving the best possible radar picture.
Maintenance free & no power required.
Radome cradle with �ne tune adjustment for di�erent mast rake angles.
• Attaches to mast with four swivel feet, matching a variety of mast pro�les.
"Picture perfect radar performance."
As tested by
ACCESSORIES AVAILABLE:
GPS / VHF Antenna Mount for Self-Lev-elling Radar Mount
Single mount for installing an additional GPS / VHF antenna above the radar. (1” by 14 tpi thread)
ORDERING INFO
LMB-A1 X10002-SCA Backstay Mount (aft mounted radar)
LM-GPS A80117 For all Leveller models
Backstay Mount (fore mounted radar)
Mast Mount
X10001-SCA
X10000-SCA
LMB-F1
LMM-F1
All compatible with RD418D / RD424D / RD418HD / RD424HD
ScanstrutItem Code
RaymarineItem Code
Description
2
RADOMES
ScanstrutItem Code
RaymarineItem Code
Description
Self-Levelling Radar Mount
RADAR OPEN ARRAY
Raymarine Marine Electronics
Scanstrut Products SATCOM GPS ANTENNA DISPLAYS INSTRUMENTS CAMERAS PAGE
Mast Mount
SC100 Pole Mount
PowerTower
Dual PowerTower
Electrical Accessories
With over 25 years experience, make Scanstrut an essential part of your Raymarine electronics installa-tion.
Fully endorsed and recommended by Raymarine, a selection of the best-selling Scanstrut range is stocked centrally and available to order from Raymarine dealers worldwide.
We offer a range of products to install the following:
Visit www.scanstrut.com for further product information and technical specifications.
Marine Electronics Mounts
We o�er a standard range of over 100 di�erent installation products to mount your Raymarine radar, satcom, MFD displays, instruments, cameras and GPS antennas onto yachts, powerboats, commercial and military vessels.
Electrical Accessories
Electronics and seawater are not the best of friends and it’s essential that your installation remains dry inside.
The Scanstrut range of Electrical Accessories will ensure you complete your marine electronics install in the best way possible.
Scanstrut Accessories
A range of Accessories is available for your Scanstrut installation. From mounting an additional light or GPS Antenna, to accessories which aid installation and performance.
2
3
4
5
6
11
Scanpod 8/9 ROKK 10 Camera Mounts 10
Satcom Antenna Mount 7
Tapered Mast 6
Product Guide
PRODUCTGUIDE
2015
ORDERING INFO
DS16-P A80123 Connectors up to ø16mm | Cables 2-8mm
DS21A-P A80124 Connectors up to ø21mm | Cables 4-9mm
DS21B-P A80125 Connectors up to ø21mm | Cables 9-14mm
DS30-P A80126 Connectors up to ø30mm | Cables 9-14mm
DS-MULTI A80127 Multiple cables up to ø18mm
ScanstrutItem Code
RaymarineItem Code
Description
Electronics and seawater are not the best of friends and it’s essential that your installation remains dry inside.
The Scanstrut range of Electrical Accessories will ensure you complete your marine electronics install in the best way possible.
Electrical Accessories
Deck Seals
The only guaranteed and proven watertight installation for your antenna and navlight cables.
Pass cables into the boat, anywhere on deck. No need to remove cable plug.
Low pro�le shape for a stronger, impact resistant seal. No sharp edges to hit your foot on!
Supplied with blank and pre-drilled inner seals.
Split seal eliminates need to remove cable connectors during install.
Captive nuts in base provide easy assembly and allow reliable repeat installations.
Designed to �t multiple cables up to 15mm dia. Supplied with undrilled seal and made from marine grade aluminum with hard anodised �nish to resist impact marks.
WATERPROOF GUARANTEEIPX6 & IPX7 Tested & Approved.
Junction Box
The ‘�t and forget’ Junction Box range is the perfect sailing accessory for anyone planning boat maintenance, providing secure, IP66 watertight connections for marine electrical cables onboard any boat.
Choice of ‘standard’ box with 5 screw-down terminals or a ‘deluxe’ version which includes 10 fast-�t terminals for a quicker install.
Fit directly to chosen surface. A mounting bracket is included to allow easy removal for inspection.
Upgrade to IP67 with a Cable Seal upgrade kit.
Multi Deck Seal
11
•
•
•
•
•
•
•
ORDERING INFO
SB-8-5 A80129 Standard Junction Box | 5 screw down terminals
SB-8-10 A80130 Deluxe Junction Box | 10 fast �t terminals
SB-2G A80128 Cable Seal Pack (x2)
ScanstrutItem Code
RaymarineItem Code
Description
Visit www.scanstrut.com for further information.
Camera Mounts
ORDERING INFO
CAM-PT-150 A80119 PowerTower* - 150mm height
CAM-MM-01 A80118 Mast Mount*
PowerTower* - 300mm heightA80120CAM-PT-300
*Compatible with M-Series, T-Series & Navigator
ScanstrutItem Code
RaymarineItem Code
Description
CAMERAS
Options for installing Raymarine thermal imaging cameras onto your power or sail boat for maximum visibility at all times.
Compact Mast Mount for installation onto yacht masts.
Same great features as our standard Mast Mount range (see page X).
Camera Mast MountRaise your Camera from the deck to ensure clear visibility at all times. Designed with a 30° aft leaning profile and a small base footprint.
Camera PowerTower
ORDERING INFO
RL-RM-RYM A80295
ScanstrutItem Code
RaymarineItem Code
Description
A multi position mount for small electronic devices onboard.
Install fishfinders and chartplotters at the helm, RIB console, fishing boat dashboard , nav station and more.
ROKKINSTRUMENTS DISPLAYS
Adjustable Deck Mount
Designed to be versatile. Mount anywhere onboard.
‘Set and forget’ system ensures zero loss of clamping force over time.
Locking design provides a rock solid platform and a high clamping force with minimal e�ort from user.
Engineered to withstand high shock loading.
Corrosion resistant alloy castings, anodised and powder coated for extreme marine durability.
Easily adjusted. Unlock, reposition, lock again.
360° of rotation. 136° of tilt.
10
•
•
•
•
•
• Same great features as our standard PowerTower range (see page X).
•
RL-ARM-RYM
RL-ADM-RYM
A80294
A80293
All Rokk Mounts for a6, a7, e7 & Dragon�y
Compatability
rail mount
adjustable rail mountadjustable deck mount
Deck Pod
Mast Pod
Rail Pod
ORDERING INFO
SPM-MAXI-C X10309 3 x ST70+ Maxi Instruments (Carbon)
SPM-3I-W A80106 3 x Std Instruments
SPM-4I-W A80149 4 x Std Instruments
SPM-2MAXI-W A80108 2 x ST70+ Maxi Instruments
SPM-MAXI-W A80109 3 x ST70+ Maxi Instruments
SPR-7-RM A80239 For a6 to e7 (Rail Mounted)
SPR-7-AM A80240 For a6 to e7 (Arm Mounted)
ScanstrutItem Code
RaymarineItem Code
Description
ORDERING INFO
ScanstrutItem Code
RaymarineItem Code
Description
ORDERING INFO
ScanstrutItem Code
RaymarineItem Code
Description
SPD-8D-W A80103 Up to 9” Displays
SPD-12D-W A80104 Up to 12” Displays
SPD-15D-W A80105 Up to 15” Displays
SPD-7-W-E7 A80185 For e7
SPD-8-W-E9 A80186 Pre-cut for e9 MFD
SPD-12-W-E12 A80187 Pre-cut for e12 MFD
SPD-4XI-W A80193 1 x e7 & 2 x i70
Options to installDesigned with options to install 7” displays or 1 standard instrument.
Arm Mounted
Extend the Pod away from narrow or crowded rails for better viewing. Designed to ensure the Pod is always positioned for best viewing whatever the angle of the rail. Cables are routed internally and accessed easily via a removable cover.
Rail Mounted
Fit your display onto standard and curved rails. Viewing angled can set upon installation. Cables are routed internally through clamp and into the rail.
Swivel & tilt baseOne handed quick release action. Simply release the lever, swivel and tilt to suit requirements before lockng back into position.
Best viewing angleAn adjustable ball joint allows range of movement and multiple mounting angles.
Added strengthAn inner bracing plate secures the Deck Pod base to the pod and gives increased rigidty to the assembly eliminating potential damage from shock and vibration.
Universal mountThe range has been designed to �t mast sizes from 76mm to 223mm. Mast arms pivot about semi circular washers and an additional cross-brace provides sti�ness preventing sideways movement.
Current sailboat designs often have very open cockpits with few options for installing retro-�t instruments. The new Arm and Rail Mount options allow smaller instruments and chartplotters to be rail mounted anywhere onboard.
Solve the challenge of �nding a level mounting surface to install your displays onto your powerboat, RIB or sailbot wheelhouse.
Using a one-handed quick release lever, simply release, swivel and tilt to suit your requirements before locking back into position.
Whether racing or cruising, our Mast Pods give you the best view of your instruments.
Mast arms pivot to provide a universal �t to a wide range of mast sizes. A cross-brace adds rigidity and prevents sideways movement of the pod.
•
•
•
•
•
Carb
on M
ast P
od
9
Scanpod
Helm Pod
INSTRUMENTS DISPLAYS
Great design and neat features ensure the Scanstrut Helm Pod is the perfect choice for all cockpit con�gurations.
Our unique ‘No-Drill’ clamping system provides a universal �t on any pedestal rail. A set of mounting saddles gives a secure, watertight �xture at the rear of the pod.
Universal helm �xingFits pedestal rails from 25mm to 33.7mm. Using a unique clamping system, the pod can �t rail widths from 178mm upwards.
No Drill �xing kitCustomised U-bolts �t around rail and through the saddles into the back of the pod eliminating the need for time consuming and awkward drilling of the stainless rail.
Secure & watertight installA saddle system supports the stainless tubing to allow a secure and rigid �t onto any pedestal and also ensures a watertight seal at cable entry.
8
The product of choice for leading boat builders World-
wide, the Scanpod range has gained an enviable reputation
for exceptional quality since its launch in 2009.
SPH-3I-W A80110 3 x Std Instruments
SPH-8D-W A80112 Up to 9” Displays
SPH-12D-W A80113 Up to 12” Displays
SPH-15D-W A80114 Up to 15” Displays
SPH-SYSTEM-W A80115 9” Display + 4 Std Instruments / 12” Display + 2 Std Instruments
SPH-8-W-E9 A80183 Pre-cut for e9 MFD
SPH-12-W-E12 A80184 Pre-cut for e12 MFD
SPH-4XI-W A80194 1 x e7 & 2 x i70
ORDERING INFO
ScanstrutItem Code
RaymarineItem Code
Description
•
•
•
• Single piece composite GRP moulding for high strength and corrosion resistance*.
• and antenna.
• and maintenance.
* Stainless steel mounts available to install larger KVH M9 & Intellian i9 antenna.
Satcom Antenna Mount
ORDERING INFO
SC35 X10021-SCA Fits 37STV
SC30 X10018-SCA Fits 33STV
Fits 45STVX10022-SCASC45R
SC65 X10023-SCA Fits 60STV
ScanstrutItem Code
RaymarineItem Code
Description
SATCOM/TV
Reduce the footprint size of your satcom antenna by up to 60% to give you greater choice when choosing where to install your satcom antenna.
Adjustable Base Wedge
Satcom antennas require a horizontal mounting surface to function correctly.
Satcom wedges eradicate this problem by providing a level mounting on slopes from 0° to 12°.
Simply counter rotate the angled discs until the top surface is horizontal.
TIP: Mounting on a curved arch? The Adjustable Base Wedge accessory will solve your problem and level your satcom installation.
7
ACCESSORIES AVAILABLE:
SC50 X10026-SCA Compatible with SC35, SC45R and SC65 only.
ScanstrutItem Code
RaymarineItem Code
Description
•
• Install up to 4 GPS/VHF antenna.
• Hollow wings and stem allow hidden cabling.
• Option available to mount additional 30cm/40cm satcom at the top of the mast.
Dual PowerTower
ORDERING INFO
DPT-SR1-30 X10014-SCA Radar* + 33STV/37STV
Radar* + 45STVX10015-SCADPT-SR1-40
DPT-S01-40 X10016-SCA Open array** + 45STV
ScanstrutItem Code
RaymarineItem Code
Description
ORDERING INFO
PTM-R1-1 A80147 Radar*
Radar* + 45STVA80148PTM-R1-S40
ScanstrutItem Code
RaymarineItem Code
Description
RADOMES OPEN ARRAY SATCOM/TV
Tapered Mast
Elevating the satcom antenna above the radar eliminates antenna interference and ensures maximum performance from both applications.
Single combination mount for multiple marine electronics. Each item is positioned for maximum performance.
Features an adjustable mounting plate to allow for variation in radome size.
Positions the radar as close as possible to the structural centre of gravity, ensuring minimal load is placed on the radar arch.
TIP: Ideal for smaller powerboats where mounting space is limited.
Compact Dual PowerTower
SATCOM/TVRADOMES
CAMERAS
GPS / VHF ANTENNA
LIGHTS
6
• Antenna fastens to PowerTower using own mounting bolts.
• Pre-drilled mounting holes for ease of installation.
• IP65 gland supplied to seal cable into stem for internal cable management.
• Watertight base seal included – no need for messy sealant.
*Compatible with RD418D / RD424D / RD418HD / RD424HD
**Compatible with RA1048D / RA3048HD / RA1048SHD / RA3048SHD
*Compatible with RD418D / RD424D / RD418HD / RD424HD
• Antenna fastens to PowerTower using own mounting bolts.
• Pre-drilled mounting holes for ease of installation.
• IP65 gland supplied to seal cable into stem for internal cable management.
• Watertight base seal included – no need for messy sealant.
Stronger for heavier equipment.
• White powder coated.
• 25° forward leaning (30° aft
leaning for open array).
• Choice of 130mm (5”) or 250mm (10”) heights.
Lightweight, suits any boat.
•
• 30° aft leaning.
• Choice of 150mm (6”) or 350mm (14”) heights.
Ideal for narrow RIB arches.
•
• 30° aft leaning.
• 150mm (6”) height.
PowerTower
ORDERING INFO
PT2001 X10012-SCA 350mm height | Composite
150mm height | CompositeX10013-SCAPT2004
SPT1001 A80121 150mm height | Stainless steel
130mm height | AluminiumA80122APT19000
ScanstrutItem Code
RaymarineItem Code
Description
RADOMES SATCOM/TV
Install your antenna on the cabin roof, flybridge or radar arch of your powerboat.
Aluminium Composite Stainless steel
Choice of material:
5
Nav Light and GPS / VHF Antenna Mount
Install Nav Light, GPS or VHF antennas above the radar for maximum visibility and performance.
Attach using radar mounting bolts, no extra fastenings required. (1” by 14 tpi thread)
ACCESSORIES AVAILABLE:
Compatible with RD418D / RD424D / RD418HD / RD424HDSC110 X10017-SCA For Nav Lights (Port mounted)
SC111 X10018-SCA For GPS / VHF Antenna (Starboard mounted)
SC112 X10019-SCA For GPS / VHF Antenna (Port mounted)
ScanstrutItem Code
RaymarineItem Code
Description
• 1.9m (6.4’) recommended for level deck mounting and 2.5m (8.3’) recommended for sloping transoms.
• Accommodates two cable channels with a cover strip to hold cables in place and out of view.
• Two support modules provide maximum fore / aft and sideways support.
• Unscrew base and remove pole for racing or winter storage, leaving just
Rail stand-o� Deck strut Adjustable base
SC100 Pole Mount
Nav Light and GPS / VHF Antenna Mount
Install Nav Light, GPS or VHF antennas above the radar for maximum visibility and performance.
Attach using radar mounting bolts, no extra fastenings required. (1” by 14 tpi thread)
ORDERING INFO
SC101 X10010-SCA 1.9m height SC100 Pole*
2.5m height SC100 Pole*X10011-SCASC102
4m Through Deck SC2 Pole**X10120-SCASC2-4
ScanstrutItem Code
RaymarineItem Code
Description
RADOMES SATCOM/TV
Versatile pole mount for deck or transom mounting. No customisation or adjustment required, it works straight from the box.
4
ACCESSORIES AVAILABLE:
*Compatible with RD418D / RD424D / RD418HD / RD424HD
**Compatible with RD418D / RD424D / RD418HD / RD424HD Use with SC45R for 45STV / with SC65 for 60STVSC110 X10017-SCA For Nav Lights (Port mounted)
SC111 X10018-SCA For GPS / VHF Antenna (Starboard mounted)
SC112 X10019-SCA For GPS / VHF Antenna (Port mounted)
ScanstrutItem Code
RaymarineItem Code
Description
• Attaches to mast with four swivel feet, matching a variety
•
•
• Safety wire kit independently attaches scanner to mast for additional protection.
Mast Mount
Radar Guard
Polished stainless guards protect radome from damage and reduce wear on the sails.
Mounted using radome bolts, no extra fastenings required.
ORDERING INFO
M92722 M92722 To �t RD418D / RD418HD
To �t RD424D / RD424HDM92698M92698
ScanstrutItem Code
RaymarineItem Code
Description
RADOMES SATCOM/TV
Still the first choice for boat owners Worldwide, Scanstrut leads the way with a new generation of Mast Mounts.
Stronger. Lighter. Easier to �t.
3
ACCESSORIES AVAILABLE:
SC27 X1006-SCA To �t M92722
ScanstrutItem Code
RaymarineItem Code
Description
• • Can be installed on both adjustable and split backstays.
• Options to mount radome fore or aft of backstay.
• 2.6m (8’6”) aluminium mounting pole – supplied in 2 lengths with hidden joiner piece.
• Can be deck, transom or chainplate mounted.
• Range of nylon bushes supplied. Clamps around backstay so cable tension can be adjusted.
Backstay Mounted Mast Mounted
•
TIP: When mounting radome forward of backstay, check clearance between radome and mainsail.
Self-Levelling Radar Mount
Beautifully styled and expertly engineered to ensure your radar stays level with the horizon at all times for optimum antenna performance.
As the boat heels or rolls, the radar is kept horizontal preventing target loss and giving the best possible radar picture.
Maintenance free & no power required.
Radome cradle with �ne tune adjustment for di�erent mast rake angles.
• Attaches to mast with four swivel feet, matching a variety of mast pro�les.
"Picture perfect radar performance."
As tested by
ACCESSORIES AVAILABLE:
GPS / VHF Antenna Mount for Self-Lev-elling Radar Mount
Single mount for installing an additional GPS / VHF antenna above the radar. (1” by 14 tpi thread)
ORDERING INFO
LMB-A1 X10002-SCA Backstay Mount (aft mounted radar)
LM-GPS A80117 For all Leveller models
Backstay Mount (fore mounted radar)
Mast Mount
X10001-SCA
X10000-SCA
LMB-F1
LMM-F1
All compatible with RD418D / RD424D / RD418HD / RD424HD
ScanstrutItem Code
RaymarineItem Code
Description
2
RADOMES
ScanstrutItem Code
RaymarineItem Code
Description
Self-Levelling Radar Mount
RADAR OPEN ARRAY
Raymarine Marine Electronics
Scanstrut Products SATCOM GPS ANTENNA DISPLAYS INSTRUMENTS CAMERAS PAGE
Mast Mount
SC100 Pole Mount
PowerTower
Dual PowerTower
Electrical Accessories
With over 25 years experience, make Scanstrut an essential part of your Raymarine electronics installa-tion.
Fully endorsed and recommended by Raymarine, a selection of the best-selling Scanstrut range is stocked centrally and available to order from Raymarine dealers worldwide.
We offer a range of products to install the following:
Visit www.scanstrut.com for further product information and technical specifications.
Marine Electronics Mounts
We o�er a standard range of over 100 di�erent installation products to mount your Raymarine radar, satcom, MFD displays, instruments, cameras and GPS antennas onto yachts, powerboats, commercial and military vessels.
Electrical Accessories
Electronics and seawater are not the best of friends and it’s essential that your installation remains dry inside.
The Scanstrut range of Electrical Accessories will ensure you complete your marine electronics install in the best way possible.
Scanstrut Accessories
A range of Accessories is available for your Scanstrut installation. From mounting an additional light or GPS Antenna, to accessories which aid installation and performance.
2
3
4
5
6
11
Scanpod 8/9 ROKK 10 Camera Mounts 10
Satcom Antenna Mount 7
Tapered Mast 6
Product Guide
PRODUCTGUIDE
2015
