· Product Name : LED corn bulb Model No : S9356 Brand : SATCO Nominal Operation Voltage : AC...

www.GreenElectricalSupply.com

http://greenelectricalsupply.com

Note: This report is not valid as a BEST Test Report unless signed by an approved BEST Test Service Shenzhen Co., Ltd. This report shall not be reproduced except in full without the written approval of the testing laboratory. The test report only allows to be revised within the retention period unless further standard or the requirement was noticed. This report is for the exclusive use of BEST’s Client and is provided pursuant to the agreement between BEST and its Client. BEST’s responsibility and Liability are limited to the terms and conditions of the agreement. BEST assumes no liability to any party, other than to the Client in accordance with the agreement, for any loss, expense or damage occasioned by the use of this report. Only the Client is authorized to permit copying or distribution of this report and then only in its entirety. Any use of the BEST name or one of its marks for the sale or advertisement of the tested material, product or service must first be approved in writing by BEST. The observations and test results in this report are relevant only to the sample tested. This report by itself does not cover that the material, product, of service is or has ever been under a BEST certification program. National Voluntary Laboratory Accreditation Program (NVLAP) has accredited this laboratory under ISO17025: 2005 for specific laboratory activities as listed in the NVLAP directory of accredited laboratories. The results shown in this report were determined by this laboratory in accordance with its terms of accreditation. This report must not be used by the client to claim product endorsement by NVLAP, NIST or any agency of the U.S. Government.

IESNA LM-79: 2008

Measurement and Test Report

for

SATCO PRODUCTS INC. 110 Heartland Boulevard, Brentwood, NY 11717

Jul 10, 2015

Product Name: LED corn bulb

Model No: S9356

Test Engineer: David Zhang

Report No.: BTR66.181.15.0005.07

Sample Received Date: May 04, 2015

Test Performed Date: May 04, 2015 to May 18, 2015

Reviewed By: Steven Hsu

Prepared By: BEST Test Service Shenzhen Co., Ltd. 1st Floor, 1st Building, Weitai Industrial Park, Yingrenshi, Shiyan,

Baoan, Shenzhen, China

TEL: +86-755-28236006

FAX: +86-755-23467087-811

Email: [email protected]

mailto:[email protected]

SATCO PRODUCTS INC. Model: S9356

Report No.BTR66.181.15.0005.07 Page 2 of 9 IESNA LM-79 Test Report

TABLE OF CONTENTS

1 - GENERAL INFORMATION ................................................................................................................................... 3 1.1 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) ......................................................................... 3 1.2 OBJECTIVE ........................................................................................................................................................... 3 1.3 TEST FACILITY DESCRIPTION ............................................................................................................................... 3 1.4 TEST EQUIPMENT LIST ......................................................................................................................................... 4

2 - TEST METHOD ....................................................................................................................................................... 5 2.1 PHOTOMETRIC AND ELECTRICAL MEASUREMENT (INTEGRATED SPHERE METHOD) ......................................... 5 2.2 PHOTOMETRIC AND ELECTRICAL MEASUREMENT (GONIOPHOTOMETER METHOD) .......................................... 5 2.3 DEVIATION FROM STANDARD OPERATING PROCEDURE ....................................................................................... 5

3 – SUMMARY OF TEST RESULT ........................................................................................................................... 6

4 – SPECTRAL FLUX PLOTS ................................................................................................................................... 7

5 – EUT PHOTOS......................................................................................................................................................... 8

6 – LUMINOUS INTENSITY DISTRIBUTION TEST PLOTS (CIE CHROMATICITY) ....................................... 9



1 - GENERAL INFORMATION 1.1 Product Description for Equipment under Test (EUT)

Applicant : SATCO PRODUCTS INC. Product Name : LED corn bulb Model No : S9356 Brand : SATCO Nominal Operation Voltage : AC 100-277V Nominal Power : 120W Nominal CCT : 5000K Nominal CRI : >80 Nominal Lumen Output : 14400Lumens Nominal Life Time : 40000Hours Number of hours operated prior to measurement for new sample : 0 Hours

Stabilization Time : 1.5 hours Total operating time for measurement include stabilization time : 3.5 hours

Date of Receiving Sample : May 04, 2015 Measurement quantities measured : 1 pcs Orientation During Testing : Base up Test Requested

:

Electrical and Photometric Test Luminous Intensity Distribution Test

1.2 Objective The following test report is prepared on behalf of SATCO PRODUCTS INC. in accordance with IESNA LM-79-08, used the following American National Standards or illumination Engineering Society of North America test guides: ANSI C78.377-2008: Specifications for the Chromaticity of Solid State Lighting Products; ANSI C79.1– 2002: American National Standard for Electric Lamps – Nomenclature for Glass Bulbs Intended for Use with Electric Lamps; ANSI C78.20 – 2003: American National Standard for Electric Lamps – A, G, PS, and Similar Shapes with E26 Medium Screw Bases; ANSI C78.21 – 2011: American National Standard for Electric Lamps – PAR and R Shapes; ANSI C78.24 – 2001: American National Standard for Electric Lamps – Two-inch (51 mm); Integral-reflector Lamps with Front Covers and GU5.3 or GX 5.3 Bases; ANSI/IEC C81.61-2003: American National Standard for Electric Lamp Bases; ANSI/IEEE C62.41 – 1991 (01-May-1991): Surge Voltages in Low-Voltage AC Power Circuits, Recommended Practice for; CIE Publication No. 13.3 – 1995: Method of Measuring and Specifying Color Rendering of Light Sources; CIE Publication No. 18.2 – 1983: The Basis of Physical Photometry; IESNA LM-16-1993: Practical Guide to Colorimetry of Light Sources; IESNA LM-28-89 – 1989: Guide for the Selection, Care, and Use of Electrical Instruments in the Photometric Laboratory; IESNA LM-79-08 Electrical and Photometric Measurement of Solid State Lighting Products UL 1993 – 1999: Standard for Self-Ballasted Lamps and Lamp Adapters; UL 8750 – 2009: Light Emitting Diode (LED) Equipment for Use in Lighting Products. 1.3 Test Facility Description The Energy Efficiency Lab used by BEST to collect energy efficiency measurement data is located in 1st Floor, 1st

Building, Weitai Industrial Park, Yingrenshi, Shiyan, Baoan, Shenzhen, China. BEST Test Service Shenzhen Co., Ltd

is a National Institute of Standards and Technology (NIST) accredited laboratory, under the National Voluntary



Laboratory Accredited Program (Lab Code 200770-0). BEST Test Service Shenzhen Co., Ltd is also an ELI accredited

lab for lighting products (ELI Certificate No. ELI-L04-2010) and UL accredited lab for lighting products 1.4 Test Equipment List

Apparatus List Device Cal. Date Cal Due Date

1 Integral Sphere+ Spectrophotometer System Mar 10, 2015 Mar 09, 2016

2 Digital Power Meter Oct 18, 2014 Oct 17, 2015

3 Goniophotometer+ Spectrophotometer System Nov 20, 2014 Nov 19, 2015

4 Standard Light Source Sep 17, 2014 Sep 16, 2015

5 Standard Light Source Sep 17, 2014 Sep 16, 2015

6 Digital Storage Oscilloscope Oct 18, 2014 Oct 17, 2015

7 Ultra Compact Simulator Oct 20, 2014 Oct 19, 2015

8 Temperature Chamber Oct 20, 2014 Oct 19, 2015

9 Digital Caliper Nov 20, 2014 Nov 19, 2015

10 Digital CC&CV DC Power Supply(30V 5A) N/A N/A

11 5 1/2 Digital Multimeter Oct 18, 2014 Oct 17, 2015

12 Digital CC&CV DC Power Supply(120V 10A) N/A N/A

13 6 1/2 Digital Multimeter Oct 18, 2014 Oct 17, 2015

14 Digital Multimeter Oct 18, 2014 Oct 17, 2015

15 Temperature Recorder+Thermocouple Nov 20, 2014 Nov 19, 2015

16 Timer Controller Nov 20, 2014 Nov 19, 2015 Statement of Traceability: BEST Test Service Shenzhen Co., Ltd. certifies that all calibration has been performed using suitable standards traceable to the NIM China.



2 - Test Method 2.1 Photometric and Electrical Measurement (Integrated Sphere Method) Total light output (luminous flux) for the 25℃ ±1℃ ambient temperature conditions is measured using a 1.6m 4∏ geometry integrating sphere. Temperature is measured at a position inside the sphere. Spectral radiant flux measurements are made using Lab sphere to the detector port of the integrating sphere. Each lamp is operated at rated voltage in its designated orientation. Each lamp should be stable before measurements are made. The determining method of stable is as follows: Step 1 Take 3 measurements of the lamp light output at 15 minute interval (total time=30mintues.)This time period is in addition to the recommended pre-burning time. Step 2 Calculate the percent difference between the maximum measured value and the minimum measured value for the three consecutive measurements. Step 3 if the value calculated in Step 2 does not exceed 0.5 percent, the lamp is considered stable. Luminous flux, chromaticity coordinates, correlated color temperature and color rendering index for each lamp are calculated from the spectral radiant flux measurements taken at 2 nm intervals over the range 350 to 1050 nm. The calibration of the sphere photometer-spectrometer system is traceable to the NIST USA. Lamp efficacy (lumens per watts) for each lamp model is computed based on the revised luminous flux result. Electrical measurements including voltage, current, power and power factor are measured using the digital power Meter. The total uncertainty of the light output measurements is estimated, at the 95% confidence level, not to exceed ±1.12% over the wavelength range 350-1050 nm. 2.2 Photometric and Electrical Measurement (GonioPhotometer Method) A Goniometer was used to measure the intensity (candelas) at each angle of distribution for each sample; the photometric distance is 24m. Ambient temperature was measured equal to the height of the sample mounted on the Goniometer equipment. Each sample was operated at input rated voltage in its designated orientation. Each sample was allowed to be stable before measurement was made. Electrical measurements including voltage, current, power and power factor were measured using the Power Analyzer Before each measurement, the method below should be used to determine the lamp is stable or not. Step 1 Take 3 measurements of the lamp intensity at 15 minute interval (total time=30mintues.)This time period is in addition to the recommended pre-burning time. Step 2 Calculate the percent difference between the maximum measured value and the minimum measured value for the three consecutive measurements. Step 3 if the value calculated in Step 2 does not exceed 0.5 percent, the lamp is considered stable. Some graphics were created with Photometric Plus software. 2.3 Deviation from standard operating procedure None.



3 – Summary of Test Result

Item Test Result Accreditation

Required Fields

Lumen Output (Lumens) 14883.30 NVLAP/EPA

Luminous Efficacy (lm/w) 124.54 NVLAP/EPA

Correlated Color Temperature (CCT) 5308 NVLAP/EPA

Color Rendering Index– CRI 82.0 NVLAP/EPA

Input Power (W) 119.50 NVLAP/EPA

Optional Fields

Power Type AC DC /

Input Voltage (V) 120.0 NVLAP/EPA

Input Current (A) 1.0010 NVLAP/EPA

Power Factor 0.9950 NVLAP/EPA

x(CIE 1931) 0.3373 NVLAP/EPA

y(CIE 1931) 0.3544 NVLAP/EPA

u’ (CIE 1976) 0.2051 NVLAP/EPA

v’ (CIE 1976) 0.4849 NVLAP/EPA

Duv(CIE 1976) 0.0046 NVLAP/EPA

R9 6 NVLAP/EPA

Beam Angle: (Degree) 305.6 NVLAP/EPA

Center beam candlepower: (cd) 1556 NVLAP/EPA

Zonal lumen density (0-60°): 26.7% NVLAP/EPA






4 – Spectral Flux Plots



5 – EUT Photos



6 – Luminous Intensity Distribution Test Plots (CIE Chromaticity) This page is blank and see next page.

BEST TEST SERVICE SHENZHEN CO.,LTD Page 1 Of 14

LUMINAIRE PHOTOMETRIC TEST REPORT

NAME:

SPEC.:

MFR.: SATCO

TYPE:S9356

DIM.:

SUR.:

WEIGHT:

SERIAL No.:

PROTECTION ANGLE:

Test:U:120.0V I:1.001A P:119.5W PF:0.9950 Lamp Flux:14883.3x1 lm

030

60

90

120

150-/+180

-150

-120

-90

-60

-30

UNIT:cdC0/180, 150.8,154.4

UNIT:cd

C90/270, 152.9,152.9

AVERAGE BEAM ANGLE(50%):305.6 DEG

0

400

800

1200

1600

2000

LUMINOUS INTENSITY DISTRIBUTION DIAGRAM PLANAR ISOLUX DIAGRAM(UNIT:lx)

MH=1m

S(m)0

1

2

3

90

80

70

60

50

40

3020

100

C(DEG)

660580500410330

25083.041.025.08.30

DATA OF LAMP PHOTOMETRIC DATA Eff: 124.54 lm/W

MODEL

NOMINAL POWER(W)

RATED VOLTAGE(V)

NOMINAL FLUX(lm)

LAMPS INSIDE

TEST VOLTAGE(V)

Imax(cd)

LOR(%)

TOTAL FLUX(lm)

CIE CLASS

up(%)

down(%)K

K

S/MH(C0/180)

S/MH(C90/270)

UP,DN(C0-180)

UP,DN(C180-360)

CIBSE SHR NOM

CIBSE SHR MAX

K

K

S9356

120.0

120.0

14883.3

1

120.0

1556

100.0

14883

DIFFUSE

42.4

57.6

2.32

2.31

21.2,28.8

21.3,28.8

2.00

0.00

C Range: 0 - 360DEGC Interval: 22.5DEG

Range: 0 - 180DEG Interval: 1.0DEGJJ

Test Speed: HIGH Test System:EVERFINE GO-R5000_V2 SYSTEM V2.0.287Temperature:25.6DEG Humidity:67.1%

Test Distance:2.455m [K=1.0000]Operators:DavidTest Date:2015-05-17 Remarks:


ZONAL FLUX DIAGRAMAND LUMINANCE LIMITATION CURVES

ZONAL FLUX DIAGRAM:

�J

10 0- 10

20 10- 20

30 20- 30

40 30- 40

50 40- 50

60 50- 60

70 60- 70

80 70- 80

90 80- 90

100 90-100

110 100-110

120 110-120

130 120-130

140 130-140

150 140-150

160 150-160

170 160-170

180 170-180

C0 C45 C90 C135 C180 C225 C270 C315 zone total %lum,lamp��J ) )

DEG LUMINOUS INTENSITY:cd UNIT:lm

830.4 830.1 815.8 808.4 806.3 815.6 824.3 828.1 76.65 76.65 0.51,0.51

987.4 984.8 951.0 945.3 936.4 954.4 973.2 984.5 253.1 329.8 2.22,2.22

1165 1176 1139 1147 1123 1158 1153 1180 493.3 823.1 5.53,5.53

1311 1330 1294 1330 1292 1343 1305 1342 780.9 1604 10.8,10.8

1404 1440 1394 1462 1413 1464 1399 1456 1068 2672 18,18

1447 1503 1449 1539 1476 1528 1455 1508 1308 3980 26.7,26.7

1423 1503 1447 1549 1492 1550 1440 1508 1482 5462 36.7,36.7

1366 1456 1394 1511 1447 1509 1383 1462 1553 7015 47.1,47.1

1339 1435 1365 1480 1410 1478 1356 1437 1555 8570 57.6,57.6

1302 1396 1334 1451 1387 1449 1327 1396 1529 10099 67.9,67.9

1199 1285 1243 1358 1309 1347 1235 1286 1417 11517 77.4,77.4

1051 1124 1093 1207 1162 1196 1093 1127 1200 12717 85.4,85.4

878.2 934.9 923.2 1019 990.7 1012 923.4 935.0 936.8 13654 91.7,91.7

651.1 692.7 707.6 780.6 766.7 765.2 702.5 684.9 651.7 14305 96.1,96.1

413.2 435.4 468.7 519.5 512.2 490.5 465.0 432.6 376.3 14682 98.6,98.6

181.7 189.5 223.6 247.4 257.7 242.1 213.7 198.1 161.8 14844 99.7,99.7

26.82 34.07 45.36 52.57 59.35 53.33 44.33 33.58 37.86 14881 100,100

0.1364 0.0590 0.0536 0 0.0922 0.0627 0.0627 0.0606 1.850 14883 100,100

LUMINANCE LIMITATION CURVESGLARE CLASS ILLUMINANCE (lx)

1.15 A 2000 1000 500 <=300

1.50 B 2000 1000 500 <=300

1.85 C 2000 1000 500 <=300

2.20 D 2000 1000 500 <=300

2.55 E 2000 1000 500 <=300

a b c d e f g h

45

55

65

75

85G(DEG)

8 1000 2 3 4 5 6 8 10000 2 3 4 1

2

3

4

68

a/h

LUMINANCE (cd/(m2))

a b c d e f g h

C0/180 C90/270

LUMINANCE cd/(m2)

G(DEG) C0/180 C90/270

85 7738340 7897002

80 3932190 4014079

75 2690250 2760745

70 2079934 2115535

65 1700210 1725415

60 1446931 1448781

55 1239867 1239782

50 1092462 1084308

45 970059 957116






CU AND LUMINAIRE BUDGETARY ESTIMATE DIAGRAM

NAME:

SPEC.:

MFR.: SATCO

TYPE:S9356

DIM.:

SUR.:

WEIGHT:

SERIAL No.:

PROTECTION ANGLE:


cc

w

fc

U

U

U

RCR Coefficients of Utilization(CU)RCR:Room Cavity Ratio

80%

50% 30% 10%

20%

70%

50% 30% 10%

20%

50%

50% 30% 10%

20%

30%

50% 30% 10%

20%

10%

50% 30% 10%

20%

0

0

0

0.0

1.0

2.0

3.0

4.0

5.0

6.0

7.0

8.0

9.0

10.0

1.09

.88

.73

.63

.55

.48

.42

.38

.34

.31

.28

1.09

.82

.65

.53

.45

.38

.33

.29

.25

.23

.20

1.09

.76

.58

.46

.37

.31

.26

.22

.19

.17

.15

1.01

.81

.68

.58

.50

.44

.39

.35

.32

.29

.26

1.01

.76

.60

.50

.42

.35

.31

.27

.24

.21

.19

1.01

.71

.54

.43

.35

.29

.24

.21

.18

.16

.14

.88

.69

.57

.49

.42

.37

.33

.30

.27

.24

.22

.88

.65

.51

.42

.35

.30

.26

.23

.20

.18

.16

.88

.61

.46

.37

.30

.25

.21

.18

.15

.14

.12

.75

.58

.48

.40

.35

.31

.27

.25

.22

.20

.19

.75

.54

.43

.35

.29

.25

.22

.19

.17

.15

.14

.75

.52

.39

.31

.25

.21

.17

.15

.13

.11

.10

.63

.47

.39

.33

.28

.25

.22

.20

.18

.17

.15

.63

.45

.35

.28

.24

.20

.17

.15

.14

.12

.11

.63

.43

.32

.25

.20

.17

.14

.12

.10

.09

.08

.58

.38

.27

.21

.16

.13

.11

.09

.08

.07

.06

AREA(m2)10 20 30 40 50 70 100 200 300 500 700 1k 2k 3k 4k 5k 7k

2

3

4

5

6789

10

20

30

40

50LAMPS LUMINAIRE BUDGETARY DIAGRAM

4

55

66

H=7H=7

44

55

66

H=7H=7 CONDITIONS

FLUX 5000lm

FACTOR 0.70

Hdown 0.00m

Hwork 0.00m

Ework(AVE) 100lx

U�� cc w fc

70 50 30

50 30 20






WEC AND CCEC

NAME:

SPEC.:

MFR.: SATCO

TYPE:S9356

DIM.:

SUR.:

WEIGHT:

SERIAL No.:

PROTECTION ANGLE:


cc

w

fc

U

U

U

RCR Wall Exitance Coeffcients(WEC)RCR:Room Cavity Ratio

80%

50% 30% 10%

20%

70%

50% 30% 10%

20%

50%

50% 30% 10%

20%

30%

50% 30% 10%

20%

10%

50% 30% 10%

20%

0

0

0

0.0

1.0

2.0

3.0

4.0

5.0

6.0

7.0

8.0

9.0

10.0

.428

.356

.310

.275

.248

.225

.207

.191

.177

.165

.244

.195

.165

.143

.126

.113

.102

.093

.086

.079

.077

.060

.049

.042

.037

.032

.029

.026

.024

.022

.408

.338

.293

.260

.234

.212

.195

.180

.167

.156

.233

.186

.157

.136

.120

.107

.097

.088

.081

.075

.074

.057

.047

.040

.035

.031

.028

.025

.023

.021

.370

.303

.261

.231

.207

.188

.172

.159

.147

.137

.212

.169

.142

.122

.108

.096

.087

.079

.073

.067

.068

.052

.043

.037

.032

.028

.025

.023

.021

.019

.335

.271

.232

.204

.182

.165

.151

.139

.129

.120

.193

.152

.127

.110

.096

.086

.077

.070

.065

.060

.062

.048

.039

.033

.029

.025

.023

.020

.018

.017

.303

.242

.205

.179

.159

.144

.131

.120

.112

.104

.176

.137

.114

.097

.085

.076

.068

.062

.057

.052

.057

.043

.035

.030

.026

.022

.020

.018

.016

.015

cc

w

fc

U

U

U

RCR Ceiling Cavity Exitance Coefficients(CCEC)RCR:Room Cavity Ratio

80%

50% 30% 10%

20%

70%

50% 30% 10%

20%

50%

50% 30% 10%

20%

30%

50% 30% 10%

20%

10%

50% 30% 10%

20%

0

0

0

0.0

1.0

2.0

3.0

4.0

5.0

6.0

7.0

8.0

9.0

10.0

.514

.514

.509

.502

.494

.487

.480

.473

.466

.460

.454

.514

.481

.460

.444

.433

.424

.416

.410

.405

.400

.396

.514

.451

.418

.398

.386

.377

.371

.366

.363

.360

.358

.439

.440

.436

.430

.424

.418

.412

.406

.401

.396

.391

.439

.413

.396

.383

.374

.367

.361

.355

.351

.347

.344

.439

.388

.362

.345

.335

.328

.323

.319

.316

.314

.313

.300

.301

.299

.295

.292

.288

.284

.281

.278

.274

.271

.300

.284

.274

.266

.261

.256

.252

.249

.247

.244

.242

.300

.268

.252

.242

.236

.232

.229

.226

.225

.223

.222

.172

.173

.172

.171

.169

.167

.165

.163

.161

.160

.158

.172

.164

.159

.156

.153

.150

.148

.147

.145

.144

.143

.172

.156

.148

.143

.140

.137

.136

.135

.134

.133

.133

.055

.056

.055

.055

.054

.054

.053

.053

.052

.052

.051

.055

.053

.052

.050

.050

.049

.049

.048

.048

.047

.047

.055

.050

.048

.047

.046

.045

.045

.045

.044

.044

.044






UGR(Unified Glare Rating) Table

NAME:

SPEC.:

MFR.: SATCO

TYPE:S9356

DIM.:

SUR.:

WEIGHT:

SERIAL No.:

PROTECTION ANGLE:


ceiling/cavity

walls

working plane

Room dimensions Viewed crosswise Viewed endwise

0.7 0.7

0.5 0.5

0.2 0.2

0.7 0.7

0.3 0.3

0.2 0.2

0.5 0.5

0.5 0.5

0.2 0.2

0.5 0.5

0.3 0.3

0.2 0.2

0.3 0.3

0.3 0.3

0.2 0.2

x = 2H y = 2H

3H

4H

6H

8H

12H

4H 2H

3H

4H

6H

8H

12H

8H 4H

6H

8H

12H

12H 4H

6H

8H

35.3 35.2 36.5 36.3 36.1 35.9 37.3 37.2 38.3 38.2

38.5 38.4 39.5 39.4 39.3 39.2 40.4 40.3 41.5 41.3

40.2 40.1 41.2 41.2 41.0 41.0 42.1 42.0 43.2 43.1

42.1 42.1 43.0 43.0 42.9 42.9 43.9 43.9 45.0 45.0

43.1 43.2 44.1 44.1 44.0 44.0 45.0 45.0 46.1 46.1

44.4 44.4 45.3 45.3 45.2 45.3 46.2 46.2 47.3 47.3

36.3 36.2 37.4 37.3 37.2 37.1 38.2 38.1 39.3 39.2

39.6 39.5 40.5 40.4 40.5 40.4 41.4 41.3 42.5 42.4

41.5 41.4 42.3 42.2 42.4 42.3 43.2 43.1 44.4 44.3

43.6 43.5 44.3 44.2 44.5 44.4 45.2 45.1 46.4 46.3

44.7 44.6 45.4 45.3 45.6 45.6 46.3 46.3 47.5 47.5

46.0 46.0 46.7 46.6 46.9 46.9 47.6 47.6 48.8 48.8

42.2 42.1 42.9 42.8 43.1 43.1 43.8 43.8 45.0 45.0

44.6 44.5 45.2 45.1 45.5 45.4 46.1 46.0 47.3 47.2

45.9 45.8 46.4 46.4 46.9 46.8 47.4 47.3 48.6 48.6

47.5 47.4 47.9 47.9 48.4 48.3 48.9 48.8 50.1 50.1

42.4 42.3 43.0 43.0 43.3 43.3 44.0 43.9 45.2 45.1

44.9 44.8 45.4 45.3 45.8 45.8 46.4 46.3 47.6 47.5

46.4 46.3 46.8 46.7 47.3 47.2 47.8 47.7 49.0 49.0

Variations with the observer position at spacings:

S = 1.0H + 0.1 / - 0.1 + 0.1 / - 0.1

1.5H + 0.2 / - 0.3 + 0.2 / - 0.3

2.0H + 0.3 / - 0.4 + 0.3 / - 0.4

CIE Pub.117 Corrected 14883 lm Total Lamp Luminous Flux.(8log(F/F0) = 9.4)






UTILIZATION FACTORS TABLE

NAME:

SPEC.:

MFR.: SATCO

TYPE:S9356

DIM.:

SUR.:

WEIGHT:

SERIAL No.:

PROTECTION ANGLE:


REFLECTANCE

Ceiling

Walls

Working plane

0.8

0.7

0.2

0.8

0.5

0.2

0.8

0.3

0.2

0.7

0.7

0.2

0.7

0.5

0.2

0.7

0.3

0.2

0.5

0.7

0.2

0.5

0.5

0.2

0.5

0.3

0.2

0

0

0

ROOM INDEX UTILIZATION FACTORS(PERCENT) k(RI) x RCR = 5

k = 0.60 37 23 16 35 23 16 32 21 15 8

0.80 45 31 22 43 30 21 38 27 20 11

1.00 52 38 29 49 36 27 44 35 25 14

1.25 59 45 35 56 43 33 49 38 30 18

1.50 65 50 40 61 48 39 53 43 35 21

2.00 72 59 49 68 56 47 59 49 42 25

2.50 78 65 56 72 61 53 63 54 47 29

3.00 82 70 61 76 66 58 66 58 51 32

4.00 87 77 69 81 72 65 70 63 57 36

5.00 91 82 75 84 77 70 73 67 61 38

ROOM INDEX UF(total) Direct

According to DIN EN 13032-2 2004 SHRNOM = 1.25Suspended






ISOCANDELA DIAGRAM

NAME:

SPEC.:

MFR.: SATCO

TYPE:S9356

DIM.:

SUR.:

WEIGHT:

SERIAL No.:

PROTECTION ANGLE:


-90-90

-80

-80

-70

-70

-60

-60

-50

-50

-40

-40

-30

-30

-20

-20

-10

-10

0

0

10

10

20

20

30

30

40

40

50

50

60

60

70

70

80

80

90

90

HORIZONTAL(DEG)

VERTICAL(DEG)

Imax:1555(H-41.5,V60.0) (At:C=225.0,Gamma=68.0)

UNIT: cd

10% 155.520% 311.030% 466.540% 622.150% 777.660% 933.170% 108980% 124490% 1400

Conical surface Flux(90deg):2104.2 lm%lum = 14.1%%lamp = 14.1%

Conical surface Flux(120deg):3980.1 lm%lum = 26.7%%lamp = 26.7%






AAI Figure

NAME:

SPEC.:

MFR.: SATCO

TYPE:S9356

DIM.:

SUR.:

WEIGHT:

SERIAL No.:

PROTECTION ANGLE:


1m3.281ft

200.00cm6.562ft

669.8,828.9lx62.23,77.01fc

2m6.562ft

400.00cm13.12ft

167.5,207.2lx15.56,19.25fc

3m9.843ft

600.00cm19.69ft

74.42,92.10lx6.914,8.557fc

4m13.12ft

800.00cm26.25ft

41.86,51.81lx3.889,4.813fc

5m16.4ft

1000.00cm32.81ft

26.79,33.16lx2.489,3.080fc

Height Eavg,Emax DiameterAngle:90.00deg

Flux out:2104 lm

Note:The Curves indicate the illuminated area and the average illumination when the luminaire is at different distance.






ISOLUX DIAGRAM

NAME:

SPEC.:

MFR.: SATCO

TYPE:S9356

DIM.:

SUR.:

WEIGHT:

SERIAL No.:

PROTECTION ANGLE:


128.2' 39.09m

102.6' 31.27m

31.27m

102.6'

76.9' 23.45m

51.3' 15.64m

15.64m

51.3'

25.6' 7.82m

0.0' 0.00m

0.00m

0.0'

25.6' 7.82m

51.3' 15.64m

15.64m

51.3'

76.9' 23.45m

102.6' 31.27m

31.27m

102.6'

128.2' 39.09m

MOUNTING HEIGHT: 33'(10.0m)

3% 0.2480lx 0.02304fc

5% 0.4134lx 0.0384fc

10% 0.8267lx 0.07681fc

30% 2.480lx 0.2304fc

50% 4.134lx 0.384fc






Planar Illuminance Curve

Planar Illuminance Curve

-25 -20 -15 -10 -5 0 5 10 15 20 25

Distance(m)

0

0.85

1.7

2.55

3.4

4.25

5.1

5.95

6.8

7.65

8.5E(lx) MH = 10 m

C0/180

C90/270






LUMINOUS DISTRIBUTION INTENSITY DATA

NAME:

SPEC.:

MFR.: SATCO

TYPE:S9356

DIM.:

SUR.:

WEIGHT:

SERIAL No.:

PROTECTION ANGLE:


(DEG)J

C(DEG) Table--1 UNIT: cd

00 7845 79910 83015 89920 98725 107730 116535 124540 131145 137250 140455 142260 144765 143770 142375 139380 136685 134990 133995 1326100 1302105 1260110 1199115 1126120 1051125 973130 878135 770140 651145 533150 413155 292160 182165 89.3170 26.8175 3.41180 0.14

2378479983290399810951184127113421398144614781508151715061479145414401430141713891342127511971111102192180667855742930018993.730.84.000.00

4578479983090098510831176126713301396144014761503151115031486145614441435142313961349128512081124103293582469356543530818994.334.15.800.06

6878479682388696510571147123613001352139614251451146414501435140313901382137213511313125211761094100991480768956644631920610637.86.110.06

9078479581687395110461139122512941354139414221449145814471429139413771365135513341299124311721093101292381970858946934022412145.47.600.05

11378479380986495310531156125013221395144614881515153415271511148714671457144514241385132412481165107798187475062250236724313353.18.470.01

135784792808861945104411471250133014071462150815391553154915401511149114801470145114151358128612071118101991278165052037824713452.69.520.00

15878479380785993910331130121912951370142014551486150614981492147114481438143014111376132212471163107898687876363651037625314157.510.10.00

18078479280685893610361123121712921367141314491476149714921477144714221410140313871356130912411162108199188376763951237825814759.410.60.09

20378479381186594310401135122813011373142614611490151215091507148114591451144314251389133312641182109599989577465551937626215059.812.80.09

225784795816872954105611581256134314141464150315281555155015361509148914781469144914091347127811961108101290076562149135924213953.311.50.06

24878479781787295410511151124113151383142314571481149614851478144014221408139613741336127912041126104795484873060648335323413149.49.210.06

27078479882489097310601153123013051367139914281455145314401422138313691356134713271295123511651093101692381970358446534021411844.37.990.06

29378479982889497610661148122913001366140314351460146614541433141013981387137613521311124811741094100891380368156545433021411339.35.970.06

31578479982889898410881180127013421410145614891508151615081487146214481437142313961348128612101127103393581868556243331419810033.64.760.06

3387847998289029941085117612601320138214111440146314671453142614021387137613631339129912311157107899790179467455243130519294.431.34.080.11





0 1020

30

40

50

60

70

80

90270

280

290

300

310

320

330340

350

ABAB

200

400

600

800

1000

1200

1400

1600

1800

2000

I(cd)

1000 lm K = 1

d/h

0

1

2

3

90

80

70

60

50

40

30

20100

40

3020

10 lx

5

S(m2)10

22 3 4 5 6 7 8 910

32 3 4 5 6 7 8 910

41

2

3

4

5

6

789

10

20

30

40

50

60

708090

100

N

4

5

H=64

5

H=6

F = 5000 lmK = 0.7Hcc = 0.0 mHfc = 0.0 mEave = 100 lx

Pcc Pw Pfc70 50 3050 30 20

Date post:	24-Aug-2020
Category:	Documents
Upload:	others
View:	2 times
Download:	0 times

· Product Name : LED corn bulb Model No : S9356 Brand : SATCO Nominal Operation Voltage : AC...

Documents