PRODUCT ORIENTATION MODULE

DEFINITION OF TECHNICAL TERMS

Kilometer Per Hour (KPH) - unit measurement of velocity which indicates the number of kilometers traveled in one hour

Revolution Per Minute (RPM) - is a unit of frequency of full rotations completed in one minute around a fixed axis.

Torque – Turning force of a shaft to rotate.

Odometer – An instrument which measures and registers the number of kilometers of vehicle travelled.

Anti-lock Brake System (ABS) - Is a safety device which prevents the wheel on a motor vehicle from locking up while braking.

Capacitor Discharge Ignition (CDI) – is a type of electronic automotive ignition system which is develop to overcome the long charging time for high speed engine.

DEFINTION AND ILLUSTRATION OF ENGINES MECHANISM

Four-stroke - An internal combustion engine in which the intake, compression, combustion and exhaust strokes occurs during two (2) crankshaft rotations per working cycle of the engine.

Two-stroke - An internal combustion engine that completes the thermodynamic cycle in two movement of the piston (compared two twice the number for a four-stroke engine).

Overhead Valve (OHV) – is as type of piston engine that places the camshaft within the cylinder block, also called as pushrod engine or I-head engine.

Overhead Cam (OHC) – Valvetrain configurations places the engine camshaft within the cylinder head above the combustion chamber.

Generally used by: Tricycle Model Motorcycle

Generally used by: Cruiser and Sports and Moped Motorcycle

Pushrod Type

Cam Chain Type

Manual Clutch – A mechanical device that manually disconnect the engine from the transmission to allow the vehicle to change gear

Automatic Clutch - A mechanical device that automatically disconnect the engine from the transmission to allow the vehicle to change gear

Generally used for : Business, Cruiser and Leisure Motorcycles

Generally used for : Under bone and Moped and Motorcycle

Powerfulmatic (Stepless)- A mechanical device for V-belt automatic stepless shift mechanism.

Applicable for : Scooter with V-belt

Air Cooled – Is a type of cooling system which rely on the natural air circulation directly over hot parts to cool them.

Forced Air Cooled – Is a type of cooling system equipted with cooling fan which is driven by the engine to cool the engine parts.

Generally used for : Business, Cruiser, Moped Motorcycles

Generally used for : Scooters

Water Cooled – Is a type of cooling system equiped with a radiator and antifreeze to cool the engine parts.

Oil Cooled – Is a type of cooling system equipted with a small radiator used to cool the engine oil.

Generally used for : Scooters, Sports, Cruiser and Leisure Motorcycles

Generally used for : Cruiser and Motard Motorcycles

MOTORCYCLE FEATURES AND SPECS

IDOL 110/125

OVERHEAD CAM (CAM CHAIN TYPE)

TECHNICAL SPECIFICATION

ENGINE TYPE : FOUR-STROKE SINGLE CYLINDER (OHC)DISPLACEMENT : 125cc

COOLING SYSTEM : AIR COOLED

GEAR SHIFTING : 4 SPEED AUTO CLUTCHSTARTING MODE : ELECTRIC/ KICKFUEL CONSUMPTION : 45 KM/LFUEL TANK CAPACITY: 4LBRAKE SYSTEM : DISC (FRONT) / DRUM (REAR)SUSPENSION TYPE : TELESCOPIC (FRONT) / DUAL SHOCK (REAR)TIRE SIZE : 2.50 X 17 (FRONT) / 2.75 X 17 (REAR)

FEATURES

METER ASSY

Speedometer

High Beam

GearIndicator

Signal Indicator Light

Fuel Gauge

SWITCHES

CHAIN COVER

STYLISH FRONT COVER AND PARK LIGHT

MAGS

Free Flow Muffler 12” Flower Disc

COMPRESSION RELEASE

THANK YOU…