PANORAMICA PRODOTTI
PRODUCTOVERVIEW
+50%
Più di 30 anni di esperienza nella progettazione e nella produzione di cilindri pneumatici sono il know-how che Artec mette a disposizione di tutti i clienti.
Artec nasce nel 1982 a Cento, cittadina situata al centro tra le province di Bologna, Modena e Ferrara, e fin da subito si specializza nella produzione di cilindri pneumatici a corsa breve e compatti.Nel 2008 la nuova proprietà dà nuova linfa all’impresa, investendo nello sviluppo di nuovi prodotti, in soluzioni logistiche orientate al cliente, nella qualificazione e nella formazione delle risorse umane. Il risultato del nuovo modo di progettare, produrre, distribuire è lo sviluppo di cilindri ISO 15552, ISO 21287, ISO 6432 e STOPPER, che consentono l’impiego in nuove applicazioni e l’ampliamento della presenza sia sul mercato nazionale che internazionale. Artec oggi è in grado di garantire elevata competenza tecnica, flessibilità produttiva e commerciale, velocità di consegna e assistenza tecnica costante: non esistono soluzioni standard, ma quelle che servono davvero a ogni singolo cliente. Dalla progettazione alla produzione, tutto avviene internamente, in un ciclo di qualità completamente made in Italy che coniuga innovazione, sostenibilità e rispetto dell’ambiente. I due nuovi impianti fotovoltaici per una potenza complessiva installata di 218 kW coprono, infatti, l’intero fabbisogno energetico.Attenzione al cliente, servizio, qualità fanno di Artec il partner ideale per l’automazione pneumatica.
Artec puts the know-how resulting from 30 years of experience in the field of pneumatic components for automation at its customers’ disposal.
Artec was founded in 1982 in Cento, a small town located in the Bologna, Modena and Ferrara area and is specialized in the production of short-stroke and compact pneumatic cylinders.In 2008, the new owners boosted the company by investing in the development of new products, customer-oriented logistic solutions and human resource training.New design, production and distribution criteria have resulted in ISO 15552, ISO 21287, ISO 6432 certified cylinders and STOPPERS, which allow Artec to use their products for a wider variety of applications and expand their presence on both domestic and international markets.Artec ensures high technical expertise, commercial flexibility, prompt deliveries and a reliable technical service: no standard solutions, just tailored made solutions based on the customers’ needs.From design to production, everything is done in house: Artec’s “Made in Italy” combines innovation, sustainability and respect for the environment. The two new photovoltaic systems totalling a capacity of 218 kW which cover the entire energy requirements are proof of this.Outstanding customer care, service and quality - Artec is your ideal partner for pneumatic automation.
CILINDRI TONDI ROUND CYLINDERS
SERIE
I• Alesaggi disponibili Ø 32-40-50-63 mm• A richiesta esecuzione per alte temperature• Versioni ammortizzate e non ammortizzate• Resistenti grazie al montaggio a doppia rullatura
• Available in bores Ø 32-40-50-63 mm• High temperature execution on request• Models with or without cushioning• Resistant thanks to the double rolling assembly
MINICILINDRI ISO 6432 ISO 6432 MICRO CYLINDERS
SERIE
O• Alesaggi disponibili Ø 8-10-12-16-20-25 mm• A richiesta esecuzione per alte temperature• Versioni ammortizzate e non ammortizzate• Resistenti grazie al montaggio a doppia rullatura• ATEX a richiesta
• Available in bores Ø 8-10-12-16-20-25 mm• High temperature execution on request• Models with or without cushioning• Resistant thanks to the double rolling assembly• ATEX on request
• Alesaggi disponibili Ø 160-200-250-320 mm• A richiesta esecuzione per alte temperature• Disponibile nella versione tandem• Possibilità di fissaggio dei sensori magnetici sui tiranti• ATEX a richiesta
• Available in bores Ø 160-200-250-320 mm• High temperature execution on request• Tandem executions on request• Magnetic sensors can be assembled on tie rods• ATEX on request
CILINDRI ISO 15552 ISO 15552 CYLINDERS
• Alesaggi disponibili da Ø 32 a Ø 125 mm• A richiesta esecuzione per alte temperature• Disponibile nella versione tandem• Profilo in alluminio con cave per sensori magnetici• ATEX a richiesta
• Available in bores from Ø 32 to Ø 125 mm• High temperature execution on request• Tandem executions on request• Aluminium profile with slots for magnetic sensors• ATEX on request
SERIE
H
CILINDRI ISO 15552 ISO 15552 CYLINDERS
SERIE
U
CILINDRI COMPATTI ISO 21287ISO 21287 COMPACT CYLINDERS
SERIE
P• Alesaggi disponibili da Ø 20 a Ø 100 mm• A richiesta esecuzione per alte temperature• Disponibile nella versione tandem• Profilo in alluminio con cave per sensori magnetici• ATEX a richiesta
• Available in bores from Ø 20 to Ø 100 mm• High temperature execution on request• Tandem executions on request• Aluminium profile with slots for magnetic sensors• ATEX on request
CILINDRI COMPATTI UNITOPUNITOP COMPACT CYLINDERS
SERIE
A• Alesaggi disponibili da Ø 12 a Ø 100• A richiesta esecuzione per alte temperature• Profilo in alluminio con cave per sensori magnetici• ATEX a richiesta
• Available in bores from Ø 12 to Ø 100• High temperature execution on request• Aluminium profile with slots for magnetic sensors• ATEX on request
CILINDRI STOPPERSTOPPER CYLINDERS
SERIE
ST• Alesaggi disponibili Ø 20-32-50-80 mm• Versione ISO 21287 e UNITOP• Esecuzioni a stelo liscio e con rullino• Ideale per il bloccaggio di pezzi e portapezzi• Profilo in alluminio con cave per sensori magnetici
• Available in bores Ø 20-32-50-80 mm• ISO 21287 and UNITOP executions• Available with smooth rod and with roller• Designed for stopping moving parts or chucks• Aluminium profile with slots for magnetic sensors
SERIE
RSERIE
KCILINDRI COMPATTICOMPACT CYLINDERS
• Alesaggi disponibili Ø 125-160-200-250 mm• A richiesta esecuzione per alte temperature• Disponibile nella versione tandem • Possibilità di fissaggio dei sensori magnetici sui tiranti
• Available in bores Ø 125-160-200-250 mm• High temperature execution on request• Tandem executions on request• Magnetic sensors can be assembled on tie rods
SERIE
T• Alesaggi disponibili Ø 6-10-16 mm• Funzionamento a semplice effetto• Disponibile con stelo liscio e stelo filettato maschio
• Available in bores Ø 6-10-16 mm• Single acting operation• Available with smooth rod and with threaded rod
• Alesaggi disponibili da Ø 12 a Ø 100 mm• A richiesta esecuzione per alte temperature• Interassi di fissaggio con fori asolati• Profilo in alluminio con cave per sensori magnetici
• Available in bores from Ø 12 to Ø 100 mm• High temperature execution on request• Fixing centers with slotted holes• Aluminium profile with slots for magnetic sensors
SERIE
FCILINDRI CORSA BREVESHORT STROKE CYLINDERS
CILINDRI A CARTUCCIACARTRIDGE CYLINDERS
CILINDRI CORSA BREVESHORT STROKE CYLINDERS
• Alesaggi disponibili Ø 8-12-20-32-50-63 mm• Corpo ricavato da barra piena• Disponibile versione non magnetica a semplice
e doppio effetto
• Available in bores Ø 8-12-20-32-50-63 mm• Compact body made of solid bar• Non-magnetic, single acting and double acting executions
CILINDRI TONDI INOXSTAINLESS STEEL ROUND CYLINDERS
SERIE
J• In acciaio inox AISI 304• Alesaggi disponibili da Ø 32 a Ø 63 mm• A richiesta esecuzione per alte temperature• Resistenti grazie al montaggio a doppia rullatura
• In stainless steel AISI 304• Available in bores from Ø 32 to Ø 63 mm• High temperature execution on request• Resistant thanks to the double rolling assembly
MINICILINDRI INOX ISO 6432ISO 6432 SS MICRO CYLINDERS
SERIE
Z• In acciaio inox AISI 304• Alesaggi disponibili da Ø 16 a Ø 25 mm• A richiesta esecuzione per alte temperature• Resistenti grazie al montaggio a doppia rullatura• ATEX a richiesta
• In stainless steel AISI 304 • Available in bores from Ø 16 to Ø 25 mm• High temperature execution on request• Resistant thanks to the double rolling assembly• ATEX on request
• In acciaio inox AISI 304 e AISI 316• Alesaggi disponibili da Ø 20 a Ø 200 mm• A richiesta esecuzione per alte temperature• Disponibili nella versione tandem• ATEX a richiesta
• In stainless steel AISI 304 and AISI 316• Available in bores from Ø 20 to Ø 200 mm• High temperature execution on request• Tandem executions on request• ATEX on request
• In acciaio inox AISI 304 e AISI 316• Alesaggi disponibili da Ø 32 a Ø 125 mm• A richiesta esecuzione per alte temperature• Guarnizione stelo certificata FDA• ATEX a richiesta
• In stainless steel AISI 304 and AISI 316• Available in bores from Ø 32 to Ø 125 mm• High temperature execution on request• FDA approved piston rod seal• ATEX on request
SERIE
YCILINDRI INOX ISO 15552ISO 15552 STAINLESS STEEL CYLINDERS
SERIE
XCILINDRI COMPATTI INOX ISO 21287 ISO 21287 SS COMPACT CYLINDERS
SERBATOI RESERVOIRS
SERIE
S
ACCESSORI ACCESSORIES
SERIE
W• Unità di guida lineari• Fissaggi per cilindro• Accessori per stelo• Raccordi• Sensori magnetici
• Guide units• Mounting accessories• Piston rod accessories• Fittings• Magnetic sensors
• Serbatoi aria/olio• Moltiplicatori di pressione / Booster• Serbatoi aria in acciaio inox
• Air/oil reservoirs• Boosters• Stainless steel air reservoirs
PINZE PNEUMATICHE PNEUMATIC GRIPPERS
SERIE
M• Pinze pneumatiche ad aperture angolare• Alesaggi disponibili Ø 16-20-32-50 mm• Versione a semplice e doppio effetto, magnetica e non
magnetica
• Pneumatic angular grippers• Available in bores Ø 16-20-32-50 mm• Single acting, double acting, magnetic and non-magnetic
executions
progetto e produzione made in italy
since 1982
ARTEC SRL Via Pisacane, 15 - 44042 CENTO (FE) - ITALY T +39 051 683 62 20 - F +39 051 683 08 82
Skype: ar tec-sr l - info@ar tec-pneumatic.com www.ar tec-pneumatic.com
TH
E B
ES
T W
AY
TO
2016
-B00