Product Overview GEOCON GLOBAL
Submersible Pumps & Motors
Stainless Steel Centrifugal Casting
Pumps
Casting Pumps
Water Filled Motors
Vertical Multistage
In-line Pumps & Inverter
Vertical Multistage In-line Pumps
Inverter
Inverter Solar
Horizontal Pumps
Close-coupled Electric Pumps
Peripheral Pumps
Self-Priming Jet Pumps Centrifugal Pumps
Horizontal Multi-Stage
Centrifugal Pumps
Deep Well Pumps & Pump Control & Multipurpose
Drain Pumps
Stainless Steel Centrifugal Casting
Pumps
Intelligent
Pump Control
Multipurpose Drain Pumps
Sewage & Drainage Pumps
Submersible Drainage
Pumps & Submersible Vortex
Sewage Pumps
Submersible Sewage Vortex
Drainage/Effluent/Cutter in Cast Iron
Semi-Vortex
Wastewater Pumps
Submersible
Sewage Pumps
Submersible
Sewage Pumps
Submersible Pumps
Sewage & Drainage Pumps Pumps Accessories
Pressure Control
Pressure Tank
Clean Water Pumps & Dirty Water Pumps
High-efficiency
End-Suction Centrifugal Pumps
Casting
Fitting Pressure Boosting System
SS range from 4”, 6”, 7”, 8” to 10” Flow range : up to 210 m³/h (925 GPM) Head range : up to 685 m Power range : up to 185 kW (250 HP) Option : Full 304 or 316 Basis Cast Iron range from 6”, 7”, 8”, 9” 10” to 12” Flow range : up to 306 m³/h (1,347 GPM) Head range : up to 567 m Power range : up to 185 kW (250 HP)
A complete motor range from 6”, 7”, 8” to 10” Power range : 5.5 - 250HP DOL or Star- Delta Thrust: 20 - 75kN Voltage with ±10% tolerance: 50Hz 380V, 60Hz 460V ±10% Max. ambient water temperature +30°C to +50°C and +70°C is optional Rewindable – PVC, PP &PE2 + PA winding wire
A wide range from 6”, 7”, 8”, 9” 10” up to 12” Flow range : up to 260m³/h (1,145 GPM) Head range : up to 320 m Power range : up to 55kW (74 HP)
SUBMERSIBLE PUMPS
Stainless Steel / Centrifugal Casting
SUBMERSIBLE PUMPS
Casting
SUBMERSIBLE MOTORS
Water filled
VSP SS VSP CC
AS BS
VSM
A wide range from 6”, 7”, 8”, 9” 10” up to 12” Flow range : up to 260m³/h (1,145 GPM) Head range : up to 320 m Power range : up to 55kW (74 HP)
• Long life with High efficiency • Corrosion and wear resistant
components • High operation safety • Low installation costs • Suitable connection in NEMA
standards
• Rewindable motor- long service life • High efficiency provides operation
cost savings • Flange with NEMA standards • Stainless steel shaft • Option high corrosion resistive
material – AISI 304, AISI 316, Duplex, Bronze
• CW&CCW direction of rotation • To operated horizontally
• Long life with high efficiency • High durability and solid
construction • Easy service operation • Suitable connection in NEMA
standards • Water lubricated rubber bearing • Built-in check valve to prevent back
flow
Features and benefits
Features and benefits
Features and benefits
• Agriculture and irrigation systems • Firefighting systems • Groundwater supply • Mine de-watering • Potable water supply from deep
wells • Pressure boosting
• Fountain applications • Mining • Municipal and industrial • Reverse osmosis systems • Seawater applications • Water treatment
• Pool • Water coolant system
Applications
Applications
Applications
Flow range : up to 32 m³/h (141 GPM) Head range : up to 330 m Power range : 2.2 to 264 kW (0.5 - 60HP) Max. Liquid Temperature : -20 to +104°C Max. ambient Temperature: 50°C
Power range : 2.2 - 5.5kW Max. altitude at nominal current : 1000 m Max. ambient Temperature : +40°C Material: Aluminum enclosure Metal Parts : AISI 304 Protection Class : IP65 Kit: Pressure Transducer/ Wall Kit/ Motor Kit
Max. ambient Temperatures: +40°C Material: Aluminum enclosure Protection Class: IP55 PILOT-
Max. Amp:12A - 25A Max. altitude at nominal current: 2000 m VASCO-
Power range: 2.2 - 5.5kW Max. altitude at nominal current: 1000 m
VERTICAL MULTISTAGE
IN-LINE PUMPS
INVERTER
INVERTER
SOLAR
VIP
PILOT VASCO
VASCO SOLAR
A wide range from 6”, 7”, 8”, 9” 10” up to 12” Flow range : up to 260m³/h (1,145 GPM) Head range : up to 320 m Power range : up to 55kW (74 HP)
• Built to resist • Modular composition of parts • Integrated input filter
• Built to resist • MPPT: always maximum power • Multiple operation mode • Parameters monitoring • Advanced connectivity • Complete pump protection • Easy installation
• Pump Body: Stainless Steel • Motor : Standard or High efficiency
Impeller: stainless steel • Mechanical seal:
Silicon/Silicon/EPDM, Optional • Suction: CV with Flange, CVF with
pipe threaded or Flange or PJE • Insulation Class: F • Protection Class: IP55
Features and benefits
Features and benefits
Features and benefits
• Pressure Boosting • High Rise • Building Industry use • Fire-fighting
• HVAC - PILOT, VASCO • Irrigation - PILOT, VASCO • Groundwater - PILOT, VASCO • Pump control and protection - PILOT,
VASCO • Complete pump protection - PILOT • Booster sets with VASCO inverter - PILOT • Pressurization - PILOT • Motor on-board installation - VASCO • Wall fixing - VASCO • Submersible pumps - VASCO • Booster sets - VASCO • Pressurization - VASCO
• Sprinkler • Pool (PV Panel required) • Maximum flexibility of use • Pressurization • Irrigation • Groundwater • Reneawable Sources • Pump control and protection
Applications
Applications
Applications
Capacity : up to 470 m³/h ( 2,069 GPM) Head : up to 145 m Power : up to 90 kW
Flow range : up to 28 l/min (1.7 m³/h) Head range : up to 65m Power range : 0.5 - 5HP Max. Liquid Temperature: -20°C to +104°C Max. ambient Temperature: +50°C
Flow range : by series Head range : by series Power range : by series Inlet/ Outlet : by series
CLOSE-COUPLED ELECTRIC
PUMPS
PERIPHERAL PUMPS
SELF-PRIMING JET PUMPS CENTRIFUGAL PUMPS
HORIZONTAL MULTI-STAGE
CENTRIFUGAL PUMPS
MNE
QB JET
CM
A wide range from 6”, 7”, 8”, 9” 10” up to 12” Flow range : up to 260m³/h (1,145 GPM) Head range : up to 320 m Power range : up to 55kW (74 HP)
PUMP- • Cast iron pump body and support under
special antirust treatment • Brass impeller ( stainless steel or plastic) • AISI 304 shaft • Max. liquid temperature: +40°C/+60°C • Max. suction: +8m / +9m MOTOR- • C&U bearing • Motor with copper winding • Built-in thermal protector for single phase
motor • Insulation class: F • Protection class: IPX4 • Max. ambient temperature: +40°C
• Pump Body : Stainless Steel (CMH excluded) • Motor : Cast iron with copper winding,
single phase with thermal protector • Impeller : Stainless Steel • Shaft : AISI 304 • Mechanical seal: Ceramic / Carbon / NBR Insulation • Class : F Protection • Class : IP55
• High efficiency • Mechanical seal or packed gland
version • Packed gland version available with
the exclusive Twinner System • Easy installation • Easy maintenance • IEC standard motors
Features and benefits
Features and benefits
Features and benefits
• Water supply • Firefighting systems • Conditioning systems • Cooling water systems • General industry • Irrigation systems
• Irrigation - JET • Clean water or liquids in physical and
chemical properties - ATC, JET, QB • Industrial use and urban water supply -ATC • Pressure boosting - ATC, JET • Fire fighting - ATC • Gardening - ATC, JET • Sprinkling - JET, QB • Supporting equipment - ATC, JET, QB
• Air-conditioning system • Water treatment • Pressure boosting for the water on
processing line. • Heating and cooling water on industrial
processing line • Water supply and pressure boosting
(drinking water, weak chlorine water) • Fire-fighting system • Convey thin, clean, non-flammable and non-
explosive liquid without solid granules and fibers
Applications
Applications
Applications
ATC
CMFL CMF CMH
Liquid pH value: 6.5 - 8.5 Fluid temperature limit : <40 °C Max ambient temperature: 75 °C Operating depth : 50 m
Voltage: 220-240V 50Hz Rated Current: 2A / 3A Power: 450W / 600W Power Factor: 0.8 Insulation Class: F Speed (R.P.M): 2850 Noise Level: < 45 db (A) Start Level: 75mm Stop Level: 35mm Max. Flos: 7 or 9 m³/h – by model Max. Lift: 7.5 or 9.5 M – by model
Rated voltage, frequency: 220V/380V - by model AC, 50/60Hz Rated current: 7.5A Load power: 0.37 - 4 kW - by model Maximum control distance: 500 M
DEEP WELL PUMPS
Stainless Steel / Centrifugal Casting
INSTELLIGENT
PUMP CONTROL
MULTIPURPOSE DRAIN
PUMPS
DS
STL
WL
A wide range from 6”, 7”, 8”, 9” 10” up to 12” Flow range : up to 260m³/h (1,145 GPM) Head range : up to 320 m Power range : up to 55kW (74 HP)
• Restart interval : 30 minutes (default) • Over-current time: about 20S • No-load operating time: about 12S • Default phase operating time: about 3S - by model
• Patented electric parts & components waterproof design
• High security • Patented Seals • Patented anti-winding tech • IP55 Enclosure
• STRUCTURAL CHARACTERISTICS: Insulation Class : I Protection Class : IP68
Features and benefits
Features and benefits
Features and benefits
• For carrying the water from under
100mm-high well or for submersible usage.
• By automatic start/off pump • Over-load protection • LCD display for easy visual - by model • Over-current by a key • Adjustable restart interval - by model • Manual reset / auto switch • Non-oxidation float probe, anti-lightning,
low-voltage and low current, and safe • Float probe is not suitable for sewage and
the water which content high iron. • Resist moisture, suitable for underground
pool (Use with waterproof connector) - by model
• Toilet purpose
Applications
Applications
Applications
Flow range : up to350 l/min (21 m³/h) Head range : 10 m Power range: 0.5 - 1HP Discharge : 50 - 75mm (2"- 3") Solid diameter: 10mm Max. Liquid Temperature: 40°C
Flow range : up to 650 l/min (39 m³/h) Head range : up to 23 m Power range: 1.5 - 7.5HP Discharge: 50 - 100mm (2"- 4") Solid diameter: DV : 2 - 3HP: 35mm, 5 - 7.5HP: 50mm, DSN: 2 - 7.5HP: 6mm DE : 2 - 3HP: 22mm, 5-7.5HP: 28mm Max. Liquid Temperature: 40°C
Flow range : up to 1300 l/min (78 m³/h) Head range : up to 37 m Power range: 0.33 -7.5HP Discharge : 50 - 100mm (2"- 4") Solid diameter: 6mm (SN); 35 - 50mm (CV) Max. Liquid Temperature: 40°C
SEMI - VORTEX WASTEWATER
PUMPS
SUBMERSIBLE DRAINAGE PUMPS
SUBMERSIBLE VORTEX SEWAGE PUMPS
SUBMERSIBLE SEWAGE VORTEX/
DRAINAGE/EFFLUENT/CUTTER PUMPS Cast Iron
TP
SN CV
A wide range from 6”, 7”, 8”, 9” 10” up to 12” Flow range : up to 260m³/h (1,145 GPM) Head range : up to 320 m Power range : up to 55kW (74 HP)
• Pump Body: Cast iron • Motor : 2-Pole Motor with Thermal Protector (single phase) Overload Protector (three phases) • Impeller: SN: Effluent, CV: Vortex • Shaft: AISI 410 • Double Mechanical seal:
Ceramic/Graphite ; Sic/ Sic • Insulation Class: F • Protection Class: IP68
• Pump Body: Cast iron • Motor : 2-Pole Motor with Thermal Protector (single phase) Overload Protector (three phases) • Impeller: DV: Vortex, DSN: High efficiency, DE: Tungsten edge • Shaft: AISI 410 • Double Mechanical seal: Sic/ Sic • Insulation Class: F • Protection Class: IP68
• Pump Body: Cast iron • Motor : 2-Pole Motor with Thermal Protector (single phase) Overload Protector (three phases) • Impeller: Vortex • Double Mechanical seal:
Ceramic/Graphite ; Sic/ Sic • Insulation Class: F • Protection Class: IP68 • Cable: H07RN-F
Features and benefits
Features and benefits
Features and benefits
• Gardening • Household • Civil Engineering • Sewage Usage • Light Industry
• Gardening • Rain and spring water drainage for
domestic • Civil Engineering • Sewage Usage • Light Industry
• Agricultural waste water • Final effluent pumping • Irrigation • Wastewater treatment
Applications
Applications
Applications DV DSN DE
Flow range: up to 1,100 l/min (66 m³/h) Head range: 12 - 36m Power range: 2.2 - 7.4 kW Discharge: 50 - 75mm (2“ - 3") Solid diameter: 30mm Max. immersion depth: up to 5 m Max. Liquid Temperature: +40°C Max. grain density: 1.2x10³ kg/m³ Liquid pH value: 4 – 10
Flow range : up to 580 l/min (34.8 m³/h) Head range : up to 30 m Power range: 0.25 - 1.1 kW Discharge: 25 – 75 mm (1"- 3") Max. immersion depth: 5 m Max liquid temperature: + 40°C Liquid pH value: 6.5 – 8.5
Flow range : up to 990 l/min (59.4 m³/h) Head range : 7 - 25 m Power range: 0.18 - 3 kW Discharge: 25 - 75mm (1“ - 3") Solid diameter: 20mm Max. immersion depth: up to 5 m Max. Liquid Temperature: +40°C Max. grain density: 1.2 x10³ kg/m³ Liquid pH value: 4 – 10
SUBMERSIBLE SEWAGE
PUMPS
SUBMERSIBLE SEWAGE
PUMPS
SUBMERSIBLE
PUMPS
V
A wide range from 6”, 7”, 8”, 9” 10” up to 12” Flow range : up to 260m³/h (1,145 GPM) Head range : up to 320 m Power range : up to 55kW (74 HP)
• With Cutting/Grinder system Motor • With float switch • VDF Impeller: Vortex/Semi-Open • WQDF Impeller: trim impeller • Mechanical seal: Ceramic/Graphite • Insulation class: F • Protection class: IPX8
Motor • Three phase with thermal
protector • Cooper winding • Built-in thermal protector • Stainless steel welded shaft • Impeller: Vortex • Mechanical seal: Sic-Sic/Sic-Sic • Insulation class: F • Protection class: IPX8
Motor • Three phase with thermal
protector • Cooper winding • Built-in thermal protector • Stainless steel welded shaft • Impeller: Vortex • Mechanical seal: Ceramic/Graphite • Insulation class: F • Protection class: IPX8
Features and benefits
Features and benefits
Features and benefits
• Wastewater drainage in factories, construction sites and commercial facilities
• Drainage system in municipal sewage treatment plant
• Drainage station in residential quarters
• Municipal projects • Methane pools and filed irrigation
in countryside • Quarry, Coal Ore
• Wastewater drainage in factories, construction sites and commercial facilities
• Drainage system in municipal sewage treatment plant
• Drainage station in residential quarters
• Municipal projects • Methane pools and filed irrigation
in countryside
• Small electrical irrigation and drainage equipments
• Particularly applied in urban well water pumping
• Field irrigation and drainage • Garden irrigation and household
water supply • Drainage of industrial accumulated
water • Water supply and drainage for
construction livestock breeding, etc.
Applications
Applications
Applications
WQ QWD
SPA
Rated voltage & Frequency: 230V 115V 50Hz 60Hz Max. Rated power: 1100W Max. Pump rate: 15000l/h Max. Height: 11m Max. Depth: 8m Max. Grain Size: 5m Dia. of Pipe: 1”, 1.25”, 1.5”
CALEAN WATER PUMP
DIRTY WATER PUMP KQ KQB
A wide range from 6”, 7”, 8”, 9” 10” up to 12” Flow range : up to 260m³/h (1,145 GPM) Head range : up to 320 m Power range : up to 55kW (74 HP)
• Cable Length of cable: H05RN-F 3G0.75mm² x 10m H05RN-F 3G 1.0mm² x 10m H07RN-F 3G 1.0mm² x 10m
Features and benefits
• Household • Gardening
Applications
Flow rate: up to 1,200 m³/h (4,843 GPM) Max. head: 160 m Discharge diameter : 32 – 200 mm Working pressure (Mpa): 1.6 – 2.4 Temperature: -15 to +140 °C Speed (r/min): 50Hz -1,450 / 2,900 60Hz - 1,750 / 3,500
Flow rate: 2 - 144 m³/h (9 - 634 GPM) Head: 37 - 150 m ( 121 – 492 Feet) 220V / 380V are available. - All stainless steel submersible pumps - Dual frequency conversion control - 60Hz high-speed operation - Ultra-quiet operation - Very low noise when conversion unit running - Standardized mass production, to ensure consistent quality overall scene quickly assembled, saving construction time
HIGH-EFFICIENCY END-SUCTION
CENTRIFUGAL PUMPS
REVOLOTIONARY PRESSURE BOOSTING SYSTEM (VFD) - Cabinet Type
BV2(S)
A wide range from 6”, 7”, 8”, 9” 10” up to 12” Flow range : up to 260m³/h (1,145 GPM) Head range : up to 320 m Power range : up to 55kW (74 HP)
• Mechatronic products, piping and circuit connected to work
• Water-cooled inverter, dual-frequency control, high reliable operation
• All stainless steel submersible motor, internal water cooling, health and environmental pollution
• Small footprint, can be installed against a wall to replace the electrical control panel, flexible frequency can be achieved.
• Unit contains stainless steel check valves, piping no longer set
• Casting: cast iron& ductile iron • Impeller: cast iron, brass, bronze,
stainless steel • Shaft: carbon steel, stainless steel
Features and benefits
Features and benefits
• Handing clear water or liquid similar to clear water
• Heating • Water supply • Air-conditioning • Fire-fighting • Industrial application • Cooling circulation equipment • Environment engineering • Irrigation
• Frequency pressurized for roof water tanks
• Villas, apartments • Pure water pressure station • Stainless steel cabinet can be a
seasonal outdoor installation
Applications
Applications
EH
Technical parameters: Rated Voltage/Frequency: 220V/50Hz 115V/60Hz Rated Current/Power: 12A / 2HP 20A / 1.5HP Min. Cut-in: 20PSI Max. Cut-out: 100PSI General pressure setting: 20-40, 30-50, 40-60PSI Inlet Base: Plastic, Metal
Technical parameters: Rated voltage: 220V-240V, 110V-120V Frequency: 50/60Hz Max. Current: 10A Starting pressure setting: 1.2bar , 1.5bar, 2.2bar Max. Working pressure: 10 bar Connection thread: R1" Protection rating : IP65 Max. Working temperature: 60°C
ELECTRONIC PRESSURE
CONTROL
PRESSURE CONTROL
FLOAT SWITCH (Europe)
DSK-1
BSK-2
Technical Parameters: Rated voltage: 220V-240V, 110V-120V Frequency: 50/60Hz Max. Current: 10A Max. Power: 1.1kW (220V-240V), 0.75kW (110V-120V) Starting pressure setting: 1.5bar, 2.2bar Max. Working pressure: 10bar Connection thread : Inlet male thread G1" Outlet female thread G" Protection rating: IP54 Max. Working temperature: 60°C
DSK-3
Technical Parameters: Rated voltage: 220V-240V, 110V-120V Frequency: 50/60Hz Max. Current: 10A Max. Power: 1.1kw(220V-240V), 0.75kw(110V-120V) Starting pressure setting: 1.0bar, 1.5bar, 2.2bar Max. Working pressure: 10 bar Connection thread: R1" Protection rating: IP65 Max. Working temperature: 60°C
DSK-4
Technical parameters: Rated Voltage/Frequency: 230V/50Hz 115V/60Hz Rated Current/Power: 12A/2HP 20A/1.5HP Min. Cut-in: 20PSI Max. Cut-out: 60PSI General pressure setting 20-40, 30-50, 40-60PSI Inlet Base: Metal
BSK-6
Technical parameters: Rated Voltage/Frequency: 250V AC, 50Hz/60Hz Rated Current: 10(4)A /16(4)A 10(8)A/ 16(8)A Protection Grade: IP 68 Max. working temperature: 55°C Cable Specification: H05RNF3×0.75mm² H05RNF3×1mm² H07RNF3×1mm² H07RNF3×1.5mm² Function: Emptying and filling, dual function
FSK
WATER PUMP
PRESSURE TANKS
CF,WCF series with Carbon Steel Flange Membrane Type: Butyl/EPDM Max. Pressure: 6 - 16 bar Max. Liquid Temperature: Butyl -20°C/99°C EPDM-20°C/99°C Thickness:0.8mm, up to 1.5mm Color: Blue/Red/White, CF - Full Stainless Steel available CF19,24,36,50,80,100L without outlet valve WCF - 80,100,150,200,300L with outlet valve
CYLINDER
VT, WVT series with Carbon Steel Flange Membrane Type: Butyl/EPDM/Natural Rubber Max. Pressure: 6, 8, 10, 16 bar Max. Liquid Temperature: Butyl -20°C/99°C EPDM-20°C/99°C Natural Rubber 0°/77°C Outlet Valve: VT - excluded/WVT- included Color: VT/WVT - Blue/Red/White and VT - full Stainless Steel available 2, 4, 8, 19, 24L
VERTICAL
SF series with Carbon Steel Flange Membrane Type: Butyl/EPDM/Natural Rubber Max. Pressure: 6, 8 bar Max. Liquid Temperature: Butyl -20°/99°C EPDM -20°/99°C Natural Rubber 0°/77°C Outlet Valve: excluded Thickness: 0.8mm (up to 1.2mm) Color: Blue, Red, White 24L without Base
SPHERICAL
CONNECTOR/FITTING/VALVE/ADAPTER
STAMPING & INVESTMENT CASTING
GEOCON GLOBAL Geocon Global CO. LTD.
2F., No.269, Bodong Rd., East Dist., Chiayi City 600, Taiwan
T: +886 5 2776109 F: +886 5 2776209
E-mail: [email protected]
www.geoconglobal.com