Product overview - German Pavilion · up to 20 serial data inputs, 16 serial output channels; data...

Product overview

Issue date

June 2009

Page 2 Product overview

Böning Automationstechnologie GmbH & Co. KG Am Steenöver 4 D-27777 Ganderkesee

Phone: +49(0)4221 9475-0 Fax: +49(0)4221 9475-22 Internet: www.boening.com • E-Mail: [email protected]

Company Profile

Development, administration

and applied technology Am Steenöver 4

Production, purchasing, stock and dispatch

Am Steenöver 20

Fields of activity Böning Automationstechnologie GmbH & Co. KG specializes in the development and supply of devices and systems for all kinds of vessels. Our product range includes monitoring and control systems for ships' engines, generators, pumps, valves and bow thrusters. We increasingly supply equipment for use on board yachts, e.g. door monitoring, trim-tab control, search lights, navigation lights and surveillance cameras. Our systems are customized for each type of vessel. They are made up of serial components which are optimally adapted to fit the specific application called for. Modular design techniques enable maximum flexibility. A number of different modules are available for on-board data logging, providing connections to the sensors and processing data according to selected criteria. Monitored values are communicated to the display systems via CAN-bus, depicting the system status either graphically or as numeric values. Control commands can be carried out by means of touch screen technology or separate operating units. Safety relevant equipment is approved by international classification societies.

Training and exhibition Schierbroker Straße 158

The company The company was founded in 1977 under the name Ingenieurbüro Böning. In 1996 the legal form was changed to Ingenieurbüro Böning GmbH, and again in 2003 to Böning Automationstechnologie GmbH & Co.KG. From the outset, activities have concentrated on the development and manufacture of devices and equipment for automation on board ships. Over the course of time the production and administrative premises have grown to an area encompassing more than 2,500 m². Employees now include more than 100 specialists and engineers occupied in hardware and software development and engaged in production, sales, procurement and administration. Each year the company supplies monitoring and control systems for more than 1,000 yachts and commercial vessels. The company's quality management is certified according to ISO 9001:2000.

Product overview Page 3



Company Profile

SMT production line

Production Contrary to the current trend towards outsourcing in the field of electronics production, most Böning products are produced on our own premises. This means we have a complete production line at our disposal, enabling flexible response to our customers' wishes and the implementation of modifications and new developments without delay. To ensure consistent high quality, all assemblies are subjected to a check component by component by our own automatic optical inspection equipment. Before being dispatched, all devices are put through this “acid test“.

AOI – Automatic optical inspection

Climate chamber

EMC Laboratory

Development and Quality Assurance Our development department is dedicated to producing hardware and software solutions to tackle the specific technical issues surrounding automation on board. Requirement profiles are worked out in close cooperation with our sales staff and customers. These are then implemented step by step - from the initial idea to commissioning on board. This is where the proximity of development to production and sales truly pays off, enabling a fast and flexible response to possible additional requirements. Quality assurance is already incorporated in the conceptual phase of a new development. Our development engineers have countless facilities at their disposal to make certain the necessary measures are taken already during the planning phase to ensure the future reliability and durability of Böning products. For instance, to ensure the reliable performance of our products under real conditions, all devices are tested in a climate chamber, where they are subjected to extremes of temperature (-40 to +180°C) as well as humidity (15 to 100%). Devices intended for outdoor use are subjected to high dosages of UV light to examine the long-term effects of exposure to strong sunlight. Equipment-specific visualization Application programming

Nowadays, the electro-magnetic compatibility of electronic devices is becoming increasingly critical. Requirements in this respect must already be taken into account during the development phase of an electronic component. Our own in-house EMC laboratory provides the developers with direct feedback and the possibility to respond immediately and conform to the requirements of running projects. This translates into considerably shorter development times. Moreover, these inspections constitute an important prerequisite for subsequent approval on the part of international classification societies (Germanischer Lloyd, Lloyd's Register etc.).




Alarm- and Display Systems

AHD 1019 Panel Computer System, a sunlight readable display with a screen diameter of 19 " combined with a powerful computer in one housing; good readability under all lighting conditions; either manual or automatic brightness control, 4 CAN bus interfaces, LAN, USB, CCTV video and DVI-D Input

AHD-DC Control panel for AHD 1019; interface to joystick or trackball is integrated; control panels are connected to the system via CAN bus; up to eight display units can be centrally operated by one panel

AHD-DC 880 Control Panel for AHD 1019 with touch screen display; integrated sensor for automatic dimming; connection of control panels to the system via CAN bus

AHD 1015 TC 15“-TFT Display with integrated PC unit for indication the ship data in graphic and tabular; for installation into control desk or switchboard; readability in all lighting conditions; automatic brightness adjustment; up to 4 CAN bus lines; noiseless PC unit in a compact housing; shock-intensive, fanless system without rotating parts; optional CCTV video and DVI-D input





AHD 1010 TC 10.4“-TFT Display with integrated PC unit for indication the ship data in graphic and tabular; for installation into control desk or switchboard; readability in all lighting conditions; automatic brightness adjustment; up to 4 CAN bus lines; noiseless PC unit in a compact housing; shock-intensive, fanless system without rotating parts; optional CCTV video and DVI-D input

AHD 880 TC 8.8“ monitor with integrated touch screen for flush-

mounting in consoles or control desks, good readability

in all lighting conditions, adjustable brightness; 3 CAN

bus interfaces; CCTV video input

AHD 650 / AHD 651 6.5" colour screen for graphic visualization and presentation of data; alarm table with all upcoming alarms; automatically dimmed backlight

AHD 650R The remote control panel AHD 650R is connected to AHD 650 or AHD 651 with a 8-pole cable; all functions of the display, except on/off functionality, are operated by 5 buttons

AHD 524 LCD display for graphic and text-oriented presentation of data; with automatic backlight dimming; integrated clock; serial interface connection to a printer





AHD 414 A Alarm system with 11 binary inputs, with 3 group- und 1 horn relays; dimensions 144mm x 144mm x 55mm; type approved by ABS, BV, GL, LR, RMS

Kompakt EDA 47 Alarm and indication system “Kompakt EDA” for up to 47 messages; illuminated and automatically dimmed text fields; available as alarm panel or group panel; approved by GL

AHD 406H Group alarm panel for 10 alarm groups; with 6 alarm group relay outputs and 1 relay “RUF ALLE ING”; with illuminated and automatically dimmed text fields AHD 406 control and monitoring unit for control desk installation, front-dimensions: 72mm x 144mm; connection with 50-pole ribbon cable and terminal block (part of delivery)

AHD 406-2 Cabin and mess room panel AHD 406-2 with engineer call functionality AHD-PS15B On duty panel; input unit for on-duty systems

AHD 530 Alarm panel with integrated buzzer and serial input




Data Stations

AHD 882 Central unit of an alarm and fault indication system; up 940 monitoring inputs can be processed and analyzed; up to 20 serial data inputs, 16 serial output channels; data logging of last 10,000 messages; CAN bus and RS232 interface

AHD-SAS 15 Data station for recording data from 15 analog or digital inputs (current, voltage, resistance, thermocouple elements, contacts); redundant CAN bus and RS232 interfaces; tank curves and blockings via configuration software; virtual channels for averaging or addition of values available; contacts for horn, light column panels and combined alarm available; variants for bulkhead or profile rail installation available.

AHD-PS 15 Binary data station AHD-PS 15 for recording of 15 digital inputs (contacts, transistors ...) via optocoupler; data transfer via serial output

AHD-PS 30 Binary data station AHD-PS 30 for recording of 30 digital inputs (contacts, transistors ...) via optocoupler; data transfer via serial output

AHD-PS47 Binary data station AHD-PS 47 for recording of 47 digital inputs (contacts, transistors ...) via optocoupler; data transfer via serial output




Data Stations

AHD-R101 Relay unit with 15 relays with change-over contact; serial controlled

AHD 1000 Multi-protocol data-concentrator with integrated powerful processor unit, 4x CAN-Bus, 8x RS485/ RS422/RS232, USB und LAN interface

AHD-UCC CAN/CAN Data Converter Integration of external system data into AHD-SAS CAN Bus Network. Adaptable external data protocols: NMEA 2000®, SAE J1939, Caterpillar engines, Cummins engines

AHD-UIC

Protocol converter Modbus RTU with 2x RS485 und

CAN-Bus interface.

AHD 903-15 Analogue data station, with 15 inputs

AHD 903V Amplifier for thermocouples NiCrNi




Sensors

AHD-S200 Hydrostatic level transmitter, capacitive ceramic sensor;

material: 1.4571, output signal: 4-20mA; accuracy:

0,35% FSO; nominal pressure ranges: 0...40mbar to

0...20bar; cable: 3m TPE cable incl. cable gland; type

approval: GL

AHD-S230 Pressure transmitter AHD-S260 Resistance thermometer PE4000WE Inclination sensor

Spill Warning Gauges

AHD-SW I Spill warning indicator for one tank installed on yachts; to monitor the bunker process with Böning ship alarm system; audible and visual alarm signal shows the impending end of the bunker process, alarms will be sent to the ship's alarm system; multiple indicators per tank usable; automatic dimming of LED brightness

AHD-SW II Spill warning indicator for two tanks installed on yachts; to monitor the bunker process with Böning ship alarm system; audible and visual alarm signal shows the impending end of the bunker process, alarms will be sent to the ship's alarm system; multiple indicators per tank usable; automatic dimming of LED brightness




Cable Sets

Device Net Drop cable 5-pole For the connection of CAN components such as data stations, trim taps control, navigation light system and monitoring systems among themselves Cable length of 2m, 15m, 25m, und 55m available

Device Net T-coupler 5-pole T-coupler for interconnecting CAN bus components via Device Net Drop cables.

Device Net termination resistor 5-pole female, terminates a CAN bus line

Device Net termination resistor 5-pole male, terminates a CAN bus line




Navigation and Signal Lights Control DPS02

AHD-DPS02 G14 Main module of position and signal lights control and monitoring system; for 14 lights; connection to main and emergency power supply; Expandable up to 42 lights with extension modules.

AHD-DPS02 A07 AHD-DPS02 Extension module for 7 lights;

AHD-DPS02 Com-Modul Communication module of AHD DPS02 signal lights control and monitoring system; CAN or Modbus interface (built-in main module AHD DPS 02-G14)

Power switch with neutral position; to switch between main and emergency power supply





AHD-DPS02 B21 DPS02 Emergency control panel for 21 lights

AHD-DPS02 B14 DPS02 Emergency control panel for 14 lights

AHD-DPS02 BS Customized operating panels; to control the position and signal lights Desk mount 144mm x 144mm Desk mount 192mm x 144mm Desk mount 288mm x 144mm





AHD 901G Main module of position and signal lights control and monitoring system DPS01; for 8 lights; connection to main and emergency power supply; Expandable up to 32 lights with submodules AHD 910A.

AHD 910A Substation module AHD 910A with 8 lamp circuits

AHD 406-2D DPS01 Control and monitoring unit; in individual design Desk mount 144mm x 144mm Desk mount 192mm x 144mm Desk mount 288mm x 144mm

Navigation Lights Monitoring POS10

AHD-POS10 Navigation lights monitoring system AHD-POS10 for 10 lamp circuits, with integrated semiconductor fuses, CAN-bus connection




Start-Stop Units

AHD-EOP Base module; engine start-stop unit for one marine diesel engine; increased safety and comfort by transponder technology

AHD-DEOP Cascadable extension module, start-stop unit for two marine diesel engines

AHD-EOP K I Pair of keys for AHD-EOP start-stop unit; stainless steel housing

AHD-EOP K II Pair of keys for AHD-EOP start-stop unit; plastic housing; floatable

EOP Adapter Transfer unit for adaption to the ships engine; simplified wiring with assembled cables

Pre-fabricated cable set Pre-fabricated cable set 8-pole; length 15m or 25m




Whistle Operation

AHD-WOP Control unit for signal horns; common signal sequences selectable; weather resistant and rugged design for outdoor use on deck; connection to signal lanterns available; Multiple operating units can be used for control of one horn; automatic adjustment of LED brightness

Search Light Operation

AHD-SLP Search light operation panel; desk mount panel with IP67 protection class; up to 4 panels linkable

HR1012 Search light; operating voltage 24V; usable with AHD-SLP panel




Trim Taps Control

AHD-TCS OP A Trim flap control unit AHD-TCS

AHD-TCS analogue gauge Analogue instrument of AHD-TCS system; available in black or chrome housing

AHD-TCS A Electronic control unit for manual and automatic operation; to be assembled into a desk, cabinet or in another housing; for electrical connection to two hydraulic units AHD TCS Hyd; the board is characterized by a high-quality varnish against moisture and splash water

AHD-TCS Hyd To control a trim tap; consisting of fitting panel with hydraulic unit, flow rate sensor and a hydraulic hose 225mm or 340mm long; to connect the flow rate sensor with the hydraulic unit; flow rate units consists of flow meter and mounted distribution unit Hydraulic hose 1m / 5m To connect the hydraulic power units with the

cylinders




Video Control System

AHD-VDCU Video control unit Available in following versions: 4 camera inputs und 4 Video outputs 8 camera inputs und 8 Video outputs 16 camera inputs und 16 Video outputs

AHD-VCS Q4-1 Video quad screen processor unit for AHD-VDCU

AHD-VCP Video control panel for AHD VDCU video system; panel can be installed near a display or TV screen; CAN bus interface; Useable functions: pan, tilt, motion speed switch, zoom, storage and retrieval of fixed camera angles

AHD-VC 750 Dome Camera; the camera are specified to fulfill the maritime environment requirements, and have anti-vandalism protection and protection class IP66., private zones are configurable

AHD-VC 730 Dome Camera

AHD-VC 720 IR Dome Camera

AHD- VCS C Adaptor for AHD-VC cameras; Connection of camera to video control unit via CAT5 patch cable

AHD-VCS QC Adaptor with BNC connector to use with AHD-VCS Q 4-1




Door Access System

D.A.C.S. Door Access and control system; door monitoring aboard yachts; processing of access rights via CAN bus or Ethernet network

Communication Software

AHD-Com Communication software based on „Voice over IP“ technology; provides multiple user video conferencing




Diesel Engine Controls and Safety Systems

AHD 414 Ships diesel start-stop control system with integrated ignition and overspeed monitoring

AHD 414 NG Emergency power automatic AHD 414 with mains- and generator power registration unit AHD 414NG

AHD 414 A Safety system with 11 binary inputs, 3 group- und 1 horn relays, installation dimension 144mm x 144mm x 55mm; wire break supervision sensor




Standby-Pumps and Compressor Control

AHD 408 E Stand-by pump control for two pairs of pumps; integrated Black-out functionality AHD 408 AE Standby pump control for 2 cycles with attached main pump

AHD 408 A Stand-by pump control for two electrical stand-by pumps and attached main pumps AHD 408E-K Combined stand-by pump and compressor control; for a pair of pumps and a pair of electrical compressors; integrated Black-out functionality AHD 408E-A Stand-by pump control for one pair of pumps and four malfunction messages




Bow Thruster Controls

AHD 418 Decentralized bow thruster control

AHD 419 Operating and display unit for decentralized bow thruster control AHD 418; integrated buzzer

AHD 903BS Bow thruster control with variable pitch propeller

AHD 501 The bow thruster control units are designed for control and monitoring of a bow thruster with fixed propeller, driven by a three-phase asynchronous motor (slip-ring rotor).

AHD 502 Microcontroller-based control unit for installation in wheelhouse control stand (Master control unit) and in wing control stands portside and starboard side (Slave control units); Unit front enclosure IP67; CAN bus communication; 3.5" TFT colour display: monitoring of all operating conditions, instantaneous motor current and latest alerts; automatic and adjustable dimming




Configuration Example

Outside

Data s tation AHD-SAS 15

ma ma

T-PieceLevel sensorAHD-S 200

Fuel spi l l warning AHD-SW I/AHD-SW II

100

95

90

60

30

AHD- SW I I

Fuel%

STBD

Horn: supplied by ship yard!

Emergency control panel

48 4946454342 4744

- +

535251504948474645444342

53525150

CO M 2 CO M 1

SH- +

1

2

4

6

8

3

7

10

PE

Main

Power

Emergency

Power

M-PWR

E-PWR

PWR-In

5

9

12

M-PWR

E-PWR

PWR-In

11

13

Lamp

PWR-Out

S+

S+

S+

S-

S-

S-

L8 28, 29

L9 30, 31

L10 32, 33

L11 34, 35

L12 36, 37

L13 38, 39

L14 40, 41

L1 14, 15

L2 16, 17

L3 17, 19

L4 20, 21

L5 22, 23

L6 24, 25

L7 26, 27

AHD- DPS02 G 14 / DC24

L a m p v o lt a g e 2 4 VD C

De v ic e n u m b e r

141516171819202122232425262741 40 39 38 37 36 35 34 33 32 31 30 29 28

+

-

+

-

+

-

Po

we

r

In

1

Fa

ult

CA

N

Po we r s u p p ly 2 4 V DC ± 2 5 %

AHD- SAS 15

In

2

Se

ns

or

In

3

In

4

In

5

In

6

In

7

In

8

In

9

In

1

0

In

1

1

In

1

2

In

1

3

In

1

4

In

1

5

Nav. / Si gnal Li ght Cont rol Panel

Por t

St bd

St er n

Red/ Red Uppe r

Top

Anchor

Supp ly f a ilur e

Sy st em f a ilur e / Chec kDim .

2000 hou r s

r em ain ing

AH D- DP S 0 2 B1 4

1 8

2 9

4

6

3

5

10

11

12

13

Enab le

Red/ Red Lower7 14

1 0 2

S w itch

1 - M a in Po we r Su p p ly2 - Em e rg e n c y Po we r Su p p ly

0 - OFF

C A N

Pos ition and S ignal Lights Control AHD DPS02

AHD- SW I I

Fuel%

CANCAN

Bridge

EngineRoom

DPS02 Switch

Port Stbd.

Bridge Desk

serial data

AHD 750#1

O pt oI n3 -

O pt oI n3+

O pt oI n2 -

O pt oI n2+

PS15 -

PS15+

RS485-

RS485+

CAN2L

CAN2H

CAN1L

CAN1H

- 24V

+24V

AHD 750#8

Power Supply 24VDC +/-25%

Ship CAN-Bus

BNC Video Signal

CAT 5

serial data

*) MAN delivery

VIDEO

TEST S1

S2

S3

IN

1

IN

15

PO WER

IN

2

IN

3

IN

4

IN

5

IN

6

IN

7

IN

8

IN

9

IN

10

IN

11

IN

12

IN

13

IN

14

IN

16

-

AHD-PS 1 5

CAN 2

ma

CAN 1

ma

Data s tation AHD-PS 15 / 30 / 47

F a u l t

Po we r

AHD- TCS

Po we r s u p p ly 2 4 V DC ± 2 0 %

Po we r c o n s . 1 5 0 m A

T rimm T abs Control AHD-T CS A

ma

CAN

Video Cross Bar AHD-VDCU

CAN

I g n it ion

Em e r g .

S T OP

S T A RT

S T OP

AHD- EO P

AHD-EOP

E ngine O peration

Engine Display MMDS CLC-6.3 *)

M AN M a rin e Die s e l

Ala r m s

M en

Pa ge

_

Page

+

Rese t

Pr g

M M DS-CL C 6 .3

Po we r F a u l t

CAN 1

M anua lAu t o /

AHD-T CS OP A

fe

CAN 2

fe

+

GND

Relay datastation AHD-R101

15 Relay Outputs (Switch)

AHD R101

serial data

VIDEO OUT #1 VIDEO OUT #8

Engine Port CAN-Bus

Engine Stbd. CAN-Bus

Terminationres is tor

I g n it ion

Em e r g .

S T OP

S T A RT

S T OP

AHD- EO P

AHD-EOP

E ngine O peration

Motordisplay MMDS CLC-6.3 *)


Ala r m s

M en

Pa ge

_

Page

+

Rese t

Pr g

M M DS-CL C 6 .3

Po we r F a u l t

fe

CAN 1

Searc h light

Sp ee d

F a s t

Slo w

AHD-SLP

P o we r

Fa u lt

AHD 88 0T C

Colour display AHD 880 (Bridge)

Fly

VIDEO

CAN 2CAN 1

ma


ma

fe

fe

fe

AHD-VCP

CAN

Engine Display MMDS CLC-6.3 *)


Ala r m s

M en

Pa ge

_

Page

+

Rese t

Pr g

M M DS-CL C 6 .3

Po we r F a u l t

CAN 1


M anua lAu t o /

AHD-T CS OP A

CAN 2

fe

ma

fe

fe

fe

fe

I g n it ion

Em e r g .

S T OP

S T A RT

S T OP

I g n it ion

Em e r g .

S T OP

S T A RT

S T OP

AHD- DEO P

AHD-DEOP

E ngine O peration

Motordisplay MMDS CLC-6.3 *)


Ala r m s

M en

Pa ge

_

Page

+

Rese t

Pr g

M M DS-CL C 6 .3

Po we r F a u l t

fe

CAN 1


Searching

Light

Searc h light

Sp ee d

F a s t

Slo w

AHD-SLP

ma

CAN 2

CAN 2

fe


T-Piece

ma

T erminal box with MMDS and CAN-Bus *)

T a b

E n t e r

AHD 1015TC

AHD 1015TC (Bridge)

T erminal box with MMDS and CAN-Bus *)




Notes




Systems and devices for ship automation, monitoring and control technology

Böning Automationstechnologie GmbH & Co. KG Am Steenöver 4 D-27777 Ganderkesee Germany E-Mail: [email protected] Internet: www.boening.com The manufacturer accepts no liability for errors in descriptions and diagrams. Changes due to technical progress reserved. 30 June 2009 – VeC-1118

mailto:[email protected]

Date post:	25-Aug-2018
Category:	Documents
Upload:	vandiep
View:	213 times
Download:	0 times

Product overview - German Pavilion · up to 20 serial data inputs, 16 serial output channels; data...

Documents