+ All Categories
Home > Documents > PRODUCT. PROCESS. PERFORMANCE. · 2020. 1. 25. · Processing Capabilities 22 CNC saws with...

PRODUCT. PROCESS. PERFORMANCE. · 2020. 1. 25. · Processing Capabilities 22 CNC saws with...

Date post: 13-Sep-2020
Category:
Upload: others
View: 1 times
Download: 0 times
Share this document with a friend
2
PRODUCT. PROCESS. PERFORMANCE. ITEM GRADE ITEM GRADE A-36, A-572, A-588 Rounds A-36, 1045, 1018 A-514, A-516 Squares A-36, 1018 AR Plate 300, 400 Flats A-36, A-529 Floor Plate A-786 Strips A-1011, A-36 ITEM GRADE ITEM GRADE Tube - Round Seamless, DOM, ERW Angle A-36, A-572, A-529 Tube - Square A-513, A-500 Beam A-992 Tube - Rectangular A-513, A-500 Channel A-36, A-992 Tube - Pipe Size A-500 (Handrail) Tees A-36, A-572 Pipe (Sch 40 & 80) A-53 Crane Rail ITEM GRADE ITEM GRADE C-1008/1010, A-36 1018, 1045, 1215, 12L14 A-1011 CS 1117, 1141, TG&P Cold Roll A-1008 Stress Relieved Pickled & Oiled A-1011, A-36 Squares 1018, 1045, 12L14 Galvanized A-653 Hex 1018, 12L14, 1215 Galvannealed A-653 Flats 1018 ITEM GRADE ITEM GRADE Bar Grating 19W4 All Thread Low Carbon Safety Grating Galvanized Standard Thread Expanded Metal Standard / Flattened Galvanized ITEM GRADE ITEM GRADE Rebar (Gr 40 & 60) A-615, A-996 Strapping Regular, Hi-Tensile 6/6 6 GA Rolls Strapping Seals 6/6 10 GA Rolls Strapping Tools Carbon Steel Products Structurals Tubing / Pipe (Plain End) Plate Hot Roll Bars Discrete Rebar / Wire Mesh Strapping Flat Roll Cold Finish Bars Hot Roll Rounds Maintenance & Miscellaneous Products Grating All Thread
Transcript
Page 1: PRODUCT. PROCESS. PERFORMANCE. · 2020. 1. 25. · Processing Capabilities 22 CNC saws with production cutting, cold saw, and miter cutting 60° to 60° capabilities. 5 thermal CNC

P R O D U C T .P R O C E S S .

P E R F O R M A N C E .

ITEM GRADE ITEM GRADEA-36, A-572, A-588 Rounds A-36, 1045, 1018

A-514, A-516 Squares A-36, 1018AR Plate 300, 400 Flats A-36, A-529

Floor Plate A-786 Strips A-1011, A-36

ITEM GRADE ITEM GRADETube - Round Seamless, DOM, ERW Angle A-36, A-572, A-529Tube - Square A-513, A-500 Beam A-992

Tube - Rectangular A-513, A-500 Channel A-36, A-992Tube - Pipe Size A-500 (Handrail) Tees A-36, A-572

Pipe (Sch 40 & 80) A-53 Crane Rail

ITEM GRADE ITEM GRADEC-1008/1010, A-36 1018, 1045, 1215, 12L14

A-1011 CS 1117, 1141, TG&PCold Roll A-1008 Stress Relieved

Pickled & Oiled A-1011, A-36 Squares 1018, 1045, 12L14Galvanized A-653 Hex 1018, 12L14, 1215

Galvannealed A-653 Flats 1018

ITEM GRADE ITEM GRADEBar Grating 19W4 All Thread Low Carbon

Safety Grating Galvanized Standard ThreadExpanded Metal Standard / Flattened Galvanized

ITEM GRADE ITEM GRADERebar (Gr 40 & 60) A-615, A-996 Strapping Regular, Hi-Tensile

6/6 6 GA Rolls Strapping Seals6/6 10 GA Rolls Strapping Tools

Carbon Steel Products

StructuralsTubing / Pipe (Plain End)

Plate Hot Roll Bars

Discrete

Rebar / Wire Mesh Strapping

Flat Roll Cold Finish Bars

Hot RollRounds

Maintenance & Miscellaneous ProductsGrating All Thread

Page 2: PRODUCT. PROCESS. PERFORMANCE. · 2020. 1. 25. · Processing Capabilities 22 CNC saws with production cutting, cold saw, and miter cutting 60° to 60° capabilities. 5 thermal CNC

MI

IN

KY

WV

PA

Dayton

★ LimaMansfield

Cincinnati

★✪ Springfield

FAMILY OWNED SINCE 1935

LOCATIONS

✪ Corporate HeadquartersSpringfi eld Service Center777 Benjamin DriveSpringfi eld, OH 45502937-325-5593 | 800-762-0926

★ Lima Service Center3111 St. Johns RoadLima, OH 45804419-229-8046 | 800-472-1846

★ Mansfi eld Service Center15 Mansfi eld Industrial ParkwayMansfi eld, OH 44903419-522-5500 | 800-542-5355

★ Frederick Steel630 Glendale Milford RoadCincinnati, OH 45215513-475-3200 | 800-949-1340

★ Dayton Plate Processing Center

[email protected]

For product sizes and additional informationcall your Sales Representative today!

Processing Capabilities

22 CNC saws with production cutting, cold saw, and miter cutting 60° to 60° capabilities.

5 thermal CNC cutting machines with oxy-fuel, plasma, multi-head plasma, and interior and exterior contour beveling capabilities.

2 profi le tube lasers with structural cutting capabilities.

2 CNC angle punch lines with automated multi-leg punch, cut-to-length, and part marking capabilities for fl ats, angles, and channels.

Robotic structural plasma processing system with marking and etching capabilities.

2 tapping machines.

1/4” x 12’ shear.


Recommended