PRODUCT SELECTION GUIDE - Supreme Lock€¦ · · 2011-04-18Non-handed • Adjustable power range...

P R O D U C T S E L E C T I O N G U I D E

DOOR CLOSERS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

LOCKSETS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

DEADLOCKS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9

HINGES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

EXIT DEVICES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

Lockset function guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17

Exit device function guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18

Size charts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21

Finish guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29

PRODUCT SELECTION GUIDE • TABLE OF CONTENTS

Non-handed • Adjustable power range 2 thru 6 • Optional barrier free

model adjustable power range 1 thru 4 with adjustable delayed action

valve, meets ADA requirements • Factory preset to size 3 • Power

adjustable arm bracket • Maximum 180° opening angle • Precision

cast aluminum alloy housing • Rack and pinion mechanism • Tri-pack

for regular, parallel arm and top jamb installation • Non-critical

thermostatic valves • High quality non-gumming and non-freezing

hydraulic fluid • Separate adjustable sweep and latching speed

valves • Optional adjustable hold open function 90°-170°• Adjustable backcheck control from 70°- 85° • Full body metal cover

included • Finishes: metallic aluminum, brass plated or dark

bronze • Complies with ANSI A156.4 Grade 1 • cUL and UL listed • 10 year limited warranty

POWER ADJUSTABLE DOOR CLOSERS, GRADE 1 • EXCEPTIONAL PERFORMANCE FOR HIGH TRAFFIC APPLICATIONS

4

POWER ADJUSTABLE DOOR CLOSERS • EXCEPTIONAL DOOR CONTROL FOR MODERATE TRAFFIC APPLICATIONS

DO

OR

CLO

SERS

Non-handed • Adjustable power range 2 thru 5 • Optional barrier

free model adjustable power range 1 thru 4 meets ADA

requirements • Factory preset to size 3 • Power adjustable arm

bracket • Maximum 180° opening angle • Tri-pack for regular,

parallel arm and top jamb installation • Precision cast aluminum alloy

housing • Rack and opinion mechanism • Non-critical

thermostatic valves • High quality non-gumming and non-freezing

hydraulic fluid • Separate adjustable sweep and latching speed

valves • Narrow profile plastic cover included • Adjustable backcheck

control from 70° - 85° • Finishes: metallic aluminum, brass plated or

dark bronze • cUL and UL listed • 5 year limited warranty

MODELNUMBER

MAXIMUM DOOR WIDTHBACKCHECK HOLD OPEN

DELAYEDACTION

BARRIERFREE

COVER FINISHCASE

INTERIOR EXTERIOR QTY LBS / KG

1900 BF1 to 4 60”

(1524mm)48”

(1219mm)YES OPT

YES YES

YES

AL

6

56.6 / 25.7

19002 to 6

N/A N/A AL, BP, DU 57.2 / 25.9

MODELNUMBER

MAXIMUM DOOR WIDTHBACKCHECK

BARRIERFREE

COVER FINISHCASE


1700 BF1 to 4 60”

(1524mm)48”

(1219mm)YES

YES

YES

AL

10

70.8 / 32.1

17002 to 5

N/A AL, BP, DU 70.0 / 31.8

GX1BNon-handed • For 1 3/8 (35mm) to 2 (51mm) door thickness • Standard backset 2 3/4” (70mm); optional 2 3/8” (60mm) • Fits ANSI

A115.2 (160 or 161) door prep • Solid brass 6-pin tumbler cylinder• Standard SC keyway • 9/32” (7mm) removable studs • One piece stainless steel knobs • 3” (76mm) rose diameter • Rose

cover conceals mounting plate and screws • Stainless steel

1/2” (13mm) latch bolt throw • Easy installation for new

construction or retrofit • Conforms to ANSI A156.2 Grade 1 • 3 hour cUL fire rating • 1 year mechanical limited warranty

H E A V Y - D U T Y K N O B L O C K S E T S • C O N F O R M S T O A N S I A 1 5 6 . 2 G R A D E 1 • 3 H O U R c U L F I R E R A T I N G

5

LOC

KS

ETS

DO

OR

CLO

SERS

Non-handed • Sized 1, 2, 3, 4 or 5 • Universal retrofit hole spacing • Power adjustable arm bracket • Maximum 180° opening angle • Tri-pack for regular, parallel arm and top jamb installation • Precision cast aluminum alloy housing • Rack and pinion mechanism• Non-critical thermostatic valves • High quality non-gumming and

non-freezing hydraulic fluid • Separate adjustable sweep and

latching speed valves • Optional adjustable backcheck control from

70°- 85° • Finishes: metallic aluminum, dark bronze or sprayed gold• cUL and UL listed • 5 year limited warranty

SIZED DOOR CLOSERS • RECOMMENDED FOR RESIDENTIAL & COMMERCIAL APPLICATIONS WITH MODERATE TRAFFIC

MODELNUMBER

MAXIMUM DOOR WIDTHDOOR WEIGHT RANGE BACKCHECK FINISH

CASE


75132”

(813mm)N/A 33 - 80 lbs (15 - 36 kg)

N/A

AL, BP, DU

10

42.4 / 19.2

75236”

(914mm)32”

(813mm)55 - 100 lbs (25 - 45 kg) 61.0 / 27.6

75344”

(1118mm)36”

(914mm)90 - 145 lbs (41 - 66 kg) 63.6 / 28.8

75448”

(1219mm)44”

(1118mm)125 - 190 lbs (57 - 86 kg) 784 66.2 / 30.0

75552”

(1321mm)48”

(1219mm)175 - 265 lbs (80 - 120 kg) 785 AL, DU 66.6 / 30.2

MODELNUMBER

FUNCTION FINISHCASE

QTY LBS / KG

GX1B 10 Passage

C32D 20

60.2 / 27.3

GX1B 42 Privacy 61.0 / 27.7

GX1B 53 Entrance 65.0 / 29.5

GX1B 70 Classroom 67.4 / 30.6

GX1B 80 Storeroom 65.2 / 29.6

6

LOC

KSE

TS

Non-handed • For 1 3/8 (35mm) to 1 3/4 (44mm) door thickness • Standard backset 2 3/4” (70mm); optional 2 3/8” (60mm),

3 3/4” (95mm), 5” (127mm) backsets available • Fits ANSI A115.2

(160 or 161) door prep • Solid brass 6-pin tumbler cylinder • Standard

SC keyway; optional WR keyway • Wide variety of functions available• 3” (76mm) rose diameter • Rose cover conceals mounting plate and

screws • Easy installation for new construction or retrofit • Conforms to

ANSI A156.2 series 4000, Grade 2 • 3 hour cUL fire rating • 1 year

mechanical limited warranty

STANDARD DUTY KNOB LOCKSETS • CONFORMS TO ANSI A156.2 SERIES 4000 GRADE 2 • 3 HOUR cUL FIRE RATING

GX1L

HEAVY-DUTY 5” (125mm) LEVER LOCKSETS • CONFORMS TO ANSI A156.2 GRADE 1 • 3 HOUR cUL FIRE RATING

Non-handed • For 1 3/8” (35mm) to 2 (51mm) door thickness • Standard backset 2 3/4” (70mm); optional 2 3/8” (60mm) • Fits ANSI

A115.2 (160 or 161) door prep • Solid brass 6-pin tumbler cylinder• Standard SC keyway • Small format interchangeable core model

available • Keyed functions are clutched • Wide variety of functions

available • Non-removable steel thru-bolt mounting posts • Large

3 1/2” (89mm) rose diameter • Rose cover conceals mounting plate

and screws • Stainless steel 1/2” (13mm) latch bolt throw • Easy installation for new construction or retrofit • Meets ADA

requirements • Conforms to ANSI A156.2 Grade 1 • 3 hour cUL fire

rating • 1 year mechanical limited warranty

MODELNUMBER

FUNCTION FINISHCASE

QTY LBS / KG

TL 10 Passage

C32D, C3 20

42.0 / 19.1

TL 15 Exit 36.8 / 16.7

TL 17 Single dummy trim 12.4 / 5.6

TL 32 Patio 40.6 / 18.4

TL 42 Privacy 44.2 / 20.0

TL 53 Entrance 48.4 / 22.0

TL 53 LC Entrance, less core 44.0 / 20.0

MODELNUMBER

FUNCTION FINISHCASE

QTY LBS / KG

TL 60 Store

C32D, C3 20

53.0 / 24.0

TL 70 Classroom 50.0 / 22.7

TL 79 Institution exit 43.0 / 19.5

TL 80 Storeroom 48.2 / 21.9

TL 80 LC Storeroom, less core 44.8 / 20.3

TL 82 Institution or utility 51.4 / 23.3

TL 94 Hotel or motel 49.2 / 22.3

MODELNUMBER

FUNCTION FINISHCASE

QTY LBS / KG

GX1L 10 Passage

C26D 6

30.0 / 13.6

GX1L 42 Privacy 31.6 / 14.3

GX1L 53 Entrance 32.6 / 14.8

GX1L 53 IC Entrance IC, less core 33.4 / 15.2

GX1L 70 Classroom 32.8 / 14.9

GX1L 70 IC Classroom IC, less core 31.6 / 14.4

GX1L 80 Storeroom 32.0 / 14.5

GX1L 80 IC Storeroom IC, less core 30.8 / 14.0

Non-handed • For 1 3/8 (35mm) to 1 3/4 (44mm) door thickness• Standard backset 2 3/4” (70mm); optional 2 3/8” (60mm) • Fits ANSI

A115.2 (160 or 161) door prep • Solid brass 6-pin tumbler cylinder• Standard SC keyway • Wide variety of functions available• Removable steel thru-bolted mounting posts • Large 3 1/2” (89mm)

rose diameter • Rose cover conceals mounting plate and screws• Easy installation for new construction or retrofit • Conforms to

ANSI A156.2 series 4000, Grade 2 • Meets ADA requirements• 3 hour cUL fire rating • 1 year mechanical limited warranty

HEAVY-DUTY 4 1/2” (114mm) LEVER LOCKSETS • CONFORMS TO ANSI A156.2 SERIES 4000, GRADE 2 • 3 HOUR cUL FIRE RATING

Non-handed • For 1 3/8 (35mm) to 1 3/4 (44mm) door thickness• Standard backset 2 3/4” (70mm); optional 2 3/8” (60mm) • Fits ANSI

A115.2 (160 or 161) door prep • Solid brass 6-pin tumbler cylinder• Standard SC keyway • Wide variety of functions available• Removable steel thru-bolted mounting posts • Large 3 1/2” (89mm)

rose diameter • Rose cover conceals mounting plate and screws• Easy installation for new construction or retrofit • Conforms to

ANSI A156.2 Series 4000, Grade 2 • Meets ADA requirements • 3

hour cUL fire rating • 1 year mechanical limited warranty

HEAVY-DUTY 4 1/2” (114mm) LEVER LOCKSETS • CONFORMS TO ANSI A156.2 SERIES 4000, GRADE 2 • 3 HOUR cUL FIRE RATING

7

LOC

KSE

TS

MODELNUMBER

FUNCTION FINISHCASE

QTY LBS / KG

FH 10 Passage C26D, C3 12 45.4 / 20.6

FH 17 Single dummy trim C26D 40 54.3 / 24.6

FH 42 PrivacyC26D, C3

12

46.0 / 20.9

FH 53 Entrance 49.0 / 22.2

FH 53 -O Entrance with clutchC26D

48.2 / 21.9

FH 60 Store 51.5 / 23.4

FH 70 ClassroomC26D, C3

50.4 / 22.9

FH 80 Storeroom 49.0 / 22.2

FH 80 -O Storeroom with clutchC26D

48.6 / 22.0

FH 82 Institution or utility 50.2 / 22.8

MODELNUMBER

FUNCTION FINISHCASE

QTY LBS / KG

FC 10 Passage

C26D, C3

12 43.8 / 19.9

FC 17 Single dummy trim 40 52.4 / 23.8

FC 42 Privacy

12

45.2 / 20.5

FC 53 Entrance47.2 / 21.4

FC 53 -O Entrance with clutchC26D

FC 60 Store 50.4 / 22.9

FC 70 ClassroomC26D, C3

49.2 / 22.3

FC 80 Storeroom 48.0 / 21.8

FC 80 -O Storeroom with clutchC26D

47.6 / 21.6

FC 82 Institution or utility 49.2 / 22.3

Non-handed • For 1 3/8 (35mm) to 1 3/4 (44mm) door thickness• Standard backset 2 3/4” (70mm); optional 2 3/8” (60mm),

3 3/4” (95mm), 5” (127mm) • Fits ANSI A115.2 (160 or 161) door

prep • Solid brass 6-pin tumbler cylinder • Standard SC keyway;

optional WR keyway • Wide variety of functions available • 3” (76mm) rose diameter • Rose cover conceals mounting plate and

screws • Easy installation for new construction or retrofit • Conforms to ANSI A156.2 series 4000, Grade 2 • Meets ADA

requirements • 3 hour cUL fire rating • 1 year mechanical limited

warranty

STANDARD DUTY 4” (102mm) LEVER LOCKSETS • CONFORMS TO ANSI A156.2 SERIES 4000, GRADE 2 • 3 HOUR cUL FIRE RATING

STANDARD DUTY 3 1/2” (89mm) LEVER LOCKSETS • CONFORMS TO ANSI A156.2 SERIES 4000, GRADE 2 • 3 HOUR cUL FIRE RATING

Non-handed • For 1 3/8 (35mm) to 1 3/4 (44mm) door thickness • Standard backset 2 3/4” (70mm); optional 2 3/8” (60mm),

3 3/4” (95mm), 5” (127mm) • Fits ANSI A115.2 (160 or 161) door

prep • Solid brass 6-pin tumbler cylinder • Standard SC keyway • Wide variety of functions available • 3” (76mm) rose diameter • Rose cover conceals mounting plate and screws • Easy installation

for new construction or retrofit • Conforms to ANSI A156.2 series

4000, Grade 2 • Meets ADA requirements • 3 hour cUL fire rating • 1 year mechanical limited warranty

8

LOC

KSE

TS

MODELNUMBER

FUNCTION FINISHCASE

QTY LBS / KG

EM 10 Passage C26D, C310

26.2 / 11.9

EM 15 Exit C26D 15.4 / 7.0

EM 17 Single dummy trim

C26D, C3

20 15.0 / 6.8

EM 42 Privacy

10

27.4 / 12.4

EM 52Entrance

27.8 / 12.6

EM 53 29.8 / 13.5

EM 53 LC Entrance, less core 27.8 / 12.6

EM 60 Store C26D 30.4 / 13.8

EM 70 Classroom C26D, C3 30.0 / 13.6

EM 79 Institution exit C26D 25.4 / 11.5

EM 80 Storeroom C26D, C329.8 / 13.5

EM 82 Institution or utility C26D

MODELNUMBER

FUNCTION FINISHCASE

QTY LBS / KG

EL 10 Passage

C26D

10 26.8 / 12.2

EL 17 Single dummy trim 20 15.2 / 6.9

EL 42 Privacy

10

27.6 / 12.5

EL 53 Entrance 29.6 / 13.4

EL 60 Store 31.0 / 14.1

EL 70 Classroom 30.6 / 13.9

EL 80 Storeroom 29.4 / 13.3

For 1 3/8 (35mm) to 2 1/4 (57mm) door thickness • Standard backset

2 3/4” (70mm); optional 2 3/8” (60mm), 5” (127mm) • Fits

ANSI A115.2 (160 or 161) door prep • Solid brass 6-pin tumbler

cylinder • Standard SC keyway; optional WR keyway • Solid brass

deadbolt, reinforced with hardened steel security roller, 1” (25mm)

bolt throw • Solid brass revolving 2 1/2” (64mm) ring diameter

cylinder guard • Conforms to ANSI A156.2 Grade 1 • 3 hour cUL fire

rating • 1 year mechanical limited warranty

For 1 3/8 (35mm) to 1 3/4 (44mm) door thickness • Standard backset

2 3/4” (70mm); optional 2 3/8” (60mm) • Fits standard ANSI A115.2

(160 or 161) door prep • Solid brass 6-pin tumbler cylinder • Standard

SC keyway • Solid brass deadbolt, reinforced with hardened steel

security roller, 1” (25mm) bolt throw • Free spinning security insert

and trim rings, 2 9/16” (65mm) ring diameter • Easy installation with

template • Conforms to ANSI A156.5 Grade 2 • 3 hour cUL fire rating• 1 year mechanical limited warranty

H E A V Y D U T Y D E A D L O C K S • C O N F O R M S T O A N S I A 1 5 6 . 5 G R A D E 2 • 3 H O U R c U L F I R E R A T I N G

GX1A

H E A V Y - D U T Y D E A D L O C K S • C O N F O R M S T O A N S I A 1 5 6 . 5 G R A D E 1 • 3 H O U R c U L F I R E R A T I N G

9

DE

AD

LOC

KS

MODELNUMBER

DESCRIPTION FINISHCASE

QTY LBS / KG

GX1A 51Single cylinder deadbolt with inside

thumbturn, SC keyway

C3, C5, C15,C15A, C26D, V3

12 30.6 / 13.9

GX1A 51 WEISingle cylinder deadbolt with inside

thurbturn, WR keyway

MODELNUMBER


QTY LBS / KG

FHA 51Single cylinder deadlockwith inside thumbturn

C3, C26D 24

54.8 / 24.9

FHA 60 Double cylinder deadlock 67.0 / 30.4

10

P L A I N B E A R I N G T E M P L A T E B U T T H I N G E S • S U I TA B L E F O R L O W T O M O D E R A T E T R A F F I C A P P L I C A T I O N S

Non-handed • High quality steel base material • High grade plated

finishes • Non-rising removable pins • Non-removable pin (NRP)

available on all models • Standard flat top and knock-out bottom

tips • Standard template hole pattern • Quality wood screws and

undercut machine screws included • Optional feature: factory NRP

142SERIES

DE

AD

LOC

KS

HIN

GE

S

For 1 3/8 (35mm) to 1 3/4 (44mm) door thickness; optional

2 1/4” (57mm) • Standard backset 2 3/4” (70mm); optional

2 3/8” (60mm) and 5” (127mm) • Fits standard ANSI A115.2

(160 or 161) door prep and field adjustable to fit as small as a

1 1/2” (38mm) cross bore • Solid brass 6-pin tumbler cylinder • Standard SC keyway; optional WR keyway • Solid brass deadbolt,

reinforced with hardened steel security roller, 1” (25mm) bolt throw• Free spinning security insert and trim rings, 2 9/16” (65mm) ring

diameter • Easy installation with template • Conforms to ANSI

A156.5 Grade 2 • 3 hour cUL fire rating • 1 year mechanical

limited warranty

H E A V Y - D U T Y D E A D L O C K S • C O N F O R M S T O A N S I A 1 5 6 . 5 G R A D E 2 • 3 H O U R c U L F I R E R A T I N G

MODELNUMBER

FUNCTION FINISHCASE

QTY LBS / KG

TLA 51Single cylinder deadlockwith inside thumbturn

C3, C32D 20

43.6 / 19.8

TLA 60 Double cylinder deadlock 58.2 / 26.4

MODELNUMBER

SIZE FINISHMACHINESCREWS

WOODSCREWS

BOX / CASEQTY

CASELBS / KG

142 35353 1/2” x 3 1/2”

(88.9mm x 88.9mm)C15, C3M

#10-24 X 1/2”(12.7mm)

#9 X 1”(25.4mm)

3 / 60

40.2 / 18.2

142 444” x 4”

(101.6mm x 101.6mm)C15

#12 X 1 1/4”(31.8mm)

63.0 / 28.6

142 4544 1/2” x 4”

(114.3mm x 101.6mm)C15, C26, C3, C3M, C4 66.2 / 30.0

HEAVY-DUTY BALL BEARING TEMPLATE BUTT HINGES • SUITABLE FOR HIGH TRAFFIC INDUSTRIAL DOOR APPLICATIONS

1168SERIES

179SERIES

* 18-8 Stainless steel base material

* 18-8 Stainless steel base material with NRP

11

HIN

GE

S


finishes • Non-rising removable pins • Non-removable pin (NRP)

available on all models • Standard flat top and knock-out bottom

tips for 179 model • Flush top and bottom tips for CB179 model• Standard template hole pattern • Quality wood screws and undercut

machine screws included • Optional features: factory NRP, 18-8

stainless steel base material with NRP, “-A” 1/4” (6.4mm) or “-B”

5/32” (4.0mm) radius corners with NRP, choice of ball (BT) or steeple

(ST) removable tips

BALL BEARING TEMPLATE BUTT HINGES • RECOMMENDED FOR MODERATE TO HIGH TRAFFIC APPLICATIONS


finishes • Standard non-rising non-removable pin (NRP) • Standard

flat top and knock-out bottom tips • Standard template hole pattern • Quality wood screws and undercut machine screws included • Optional features: 18-8 stainless steel base material, “B”

5/32” (4.0mm) radius corners

MODELNUMBER

SIZE AND DESCRIPTION FINISHMACHINESCREWS

WOODSCREWS

BOX / CASEQTY

CASELBS / KG

179 35353 1/2” x 3 1/2”

(88.9mm x 88.9mm)BLR, C15, C1D, C26, C26D, C3M

#10-24 x 1/2”(12.7mm)

#9 x 1”(25.4mm)

3 / 60

39.6 / 18.0

179 444” x 4”

(101.6mm x 101.6mm)BLR, C15, C1D, C26,

C26D, C32D*, C3, C3M

#12-24 x 1/2”(12.7mm)

#12 x 1 1/4”(31.8mm)

58.0 / 26.3

179 4544 1/2” x 4”

(114.3mm x 101.6mm)BLR, BLR*, C15, C1D, C2G, C26,

C26D, C32D*, C3, C3M, C4, C5, CP65.8 / 29.8

179 45454 1/2” x 4 1/2”

(114.3mm x 114.3mm)C15, C32D*

71.2 / 32.3

179 555” x 5”

(127.0mm x 127.0mm)3 / 36 55.0 / 24.9

CB179 4544 1/2” x 4” (114.3mm x 101.6mm)

Concealed ball bearingC15, C32D*, C3, C3M 3 / 60 66.4 / 30.1

MODELNUMBER

SIZE FINISHMACHINESCREWS

WOODSCREWS

BOX / CASEQTY

CASELBS / KG

1168 4544 1/2” x 4”

(114.3mm x 101.6mm)C15, C32D*

#12-24 x 1/2”(12.7mm)

#12 x 1 1/4”(31.8mm)

3 / 60 85.2 / 38.6

S I N G L E A C T I N G S P R I N G H I N G E S • R E C O M M E N D E D F O R M O D E R A T E T O H I G H T R A F F I C A P P L I C A T I O N S


finishes • Nylon bearings provide silent action • Easily adjusted spring

tension • Standard template hole pattern • Pivot point aligns with

Dorex Pro hinges of same size • Spring tensioner included • Quality

wood screws and undercut machine screws (if applicable) included• cUL and UL listed • Optional features: 1/4” (6.4mm) or 5/8” (15.9mm)

radius corners

Handed • High quality steel base material • High grade plated

finish • Fixed pin • Standard flat top and bottom tips • Reinforces

sagging or unevenly hung doors • Pivot point aligns with Dorex Pro

4 1/2” x 4” (114.3mm x 101.6mm) hinges • All necessary mounting

hardware included

REINFORCEMENT PIVOT HINGES • SUITABLE FOR RETROFIT WOOD AND HOLLOW METAL DOOR APPLICATIONS

1265SERIES

3310SERIES

12

HIN

GE

S

MODELNUMBER

SIZE AND DESCRIPTION FINISHMACHINESCREWS

WOODSCREWS

BOX / CASEQTY

CASELBS / KG

3310 35353 1/2” x 3 1/2”

(88.9mm x 88.9mm) square corners

C15, C3 N/A

#9 x 3/4”(19.1mm)

2 / 40

32.0 / 14.5

3310 444” x 4”

(101.6mm x 101.6mm) square corners#10 x 3/4”(19.1mm)

36.6 / 16.6

3310 4544 1/2” x 4”

(114.3mm x 101.6mm) square cornersC15, C1D, C26,C3, C3M, C5

#12-24 x 1/2”(12.7mm)

#10 x 1”(25.4mm)

51.0 / 23.1

3311 444” x 4” (101.6mm x 101.6mm) 1/4” (6.4mm)

radius cornersC15, C3

N/A 36.6 / 16.6

3312 444” x 4” (101.6mm x 101.6mm)5/8” (15.9mm) radius corners

C3

MODELNUMBER

SIZE HANDING FINISH SCREWSBOX / CASE

QTYCASE

LBS / KG

1265 LH

3 1/4” x 6 1/8”(82.6mm x 155.7mm)

Left hand

Satin zinc platedAll necessary mounting

hardware included1 / 30 57.6 / 26.1

1265 RH Right hand

148SERIES

HALF SURFACE TEMPLATE BUTT HINGES • SUITABLE FOR MODERATE TO HIGH TRAFFIC DOOR APPLICATIONS

Handed • Field reversible • High quality steel base material • High

grade plated finish • Non-rising removable pins • Non-removable pin

(NRP) available • Standard flat top and screw-out bottom tips • Standard

template hole pattern • Increases accessibility for the handicapped

and /or disabled • Quality wood screws and undercut machine

screws included

SWING CLEAR TEMPLATE BUTT HINGES • DESIGNED TO WIDEN DOORWAYS FOR EASIER WHEELCHAIR ACCESSIBILITY

Handed • High quality steel base material • Standard non-rising

non-removable pin (NRP) • Standard flat top and knock-out bottom

tips • Installation consists of one leaf mortised in door jamb, the

other thru-bolted to surface of door • Standard template hole pattern

on mortised leaf • Quality wood screws / thru bolts & grommets and

undercut machine screws included

HALF MORTISE TEMPLATE BUTT HINGES • SUITABLE FOR MODERATE TO HIGH TRAFFIC DOOR APPLICATIONS

Handed • High quality steel base material • Standard non-rising

non-removable pin (NRP) • Standard flat top and knock-out bottom

tips • Installation consists of one leaf mortised in door edge, the

other secured to surface of door jamb • Standard template hole

pattern on mortised leaf • Quality wood screws and undercut

machine screws included

B73SERIES

B77SERIES

13

HIN

GE

S

MODELNUMBER

SIZE HANDING FINISH MACHINE SCREWS WOOD SCREWSBOX / CASE

QTYCASE

LBS / KG

148 454-L 4 1/2” x 4”(114.3mm x 101.6mm)

Left handC15

#12-24 x 1/2”(12.7mm)

#12 x 1 1/4”(31.8mm)

3 / 30 50.8 / 23.0148 454-R Right hand

MODELNUMBER


QTYCASE

LBS / KG

B73 -L 4 1/2”(114.3mm)

Left handCP

#12-24 x 1/2”(12.7mm)

1/4” (6.4mm) - 20 x 2”(50.8mm) thru bolt

3 / 48 61.8 / 28.0B73 -R Right hand

MODELNUMBER


QTYCASE

LBS / KG

B77 -L 4 1/2”(114.3mm)

Left handCP

#12-24 x 1/2”(12.7mm)

#12 x 1 1/4”(31.8mm)

3 / 60 58.6 / 26.6B77 -R Right hand

The Dorex Pro reinforcement and filler plate hinge accessories are

made from the highest quality metals offering complementary

installation options for wood, hollow metal and/or commercial

aluminum applications.

TEMPLATE REINFORCEMENT & FILLER PLATES FOR 4 1/2” X 4” (114.3mm x 101.6mm) HINGES

HINGEACCESSORIES

14

HIN

GE

SEX

IT D

EVIC

ES

Non-handed • Field sizable • Mounting type: rim or surface vertical

rod • Easy installation for both rim and vertical rod models • 2 3/4” (70mm) backset • Retrofit 161 door prep • Available for

36” (914mm) or 48” (1219mm) width doors • Optional exterior trim

available • Made from heavy gauge steel • Stainless steel latch bolts• Stainless steel springs • Finishes: metallic aluminum, polished brass

or stainless steel • Conforms to ANSI A156.3 Grade 2• Dogging by hex key on non-fire labeled device • cUL and UL

listed for Panic Hardware • F model (1 1/2 hr.) Fire Exit Hardware• 1 year limited warranty

TOUCH PAD EXIT DEVICES • AVAILABLE WITH A VARIETY OF EXTERIOR TRIM OPTIONS • SOPHISTICATED CONTOURED DESIGN

* Trims on page 16

MODELNUMBER

SIZE AND DESCRIPTION FINISH SCREWS HOLE SIZE(Screw are not included)

CASE

QTY LBS / KG

95107 15/16” x 1 3/16” (201.6mm x 30.2mm)

Template reinforcement plate, 3/32” (2.5mm) offset

ZP

#12-24

12 / 120 52.6 / 23.995117 15/16” x 1 3/16” (201.6mm x 30.2mm)

Template reinforcement plate, 1/16” (1.2mm) offset

95127 15/16” x 1 3/16” (201.6mm x 30.2mm)Template reinforcement plate, no offset

95154 1/2” x 1 1/2” (114.3mm x 38.1mm)

Template filler plateEXW, ZP 50 / 150 43.6 / 19.8

MODELNUMBER

TYPE DESCRIPTION DOOR WIDTH FINISHCASE

QTY LBS / KG

8500 “Panic Hardware”labelled models withtouch bar dogging

Rim exit device28” - 36” (711mm - 914mm) C28, C3, C32D

4

45.8 / 20.8

8500 - 48 36” - 48” (914mm - 1219mm)

C28, C32D

53.6 / 24.3

8500V Surface vertical rod exit device28” - 36” (711mm - 914mm)

64.0 / 29.0

8500F“Fire Exit Hardware”

labelled models,1 1/2 hour rating,

non-dogging

Rim exit device46.8 / 21.2

8500F - 48 36” - 48” (914mm - 1219mm) C28 54.2 / 24.6

8500VFSurface vertical rod exit device

28” - 36” (711mm - 914mm) C28, C3, C32D 65.8 / 29.8

8500VF - 48 36” - 48” (914mm - 1219mm) C28, C32D 73.8 / 33.5

15

C R O S S B A R E X I T D E V I C E S • S L E E K T R A D I T I O N A L C R O S S B A R D E S I G N F O R N A R R O W S T I L E D O O R S

Non-handed concealed vertical rod mounting type • Handed rim

mounting type • Field sizable • Easy installation • Available with

36” (914mm) or 48” (1219mm) width crossbar • 1185 model exterior

function using a mortise cylinder and Adams Rite cam (mounted on

#1170) • 1195 model exterior function using a rim cylinder• Heavy-duty lever arms and body • Extruded aluminum contoured

crossbar • Made from high tensile strength aluminum • Concealed

fastening • Stainless steel latch bolts • Stainless steel springs• Finishes: anodized aluminum or dark bronze • Dogging by slotted

key or outside cylinder • cUL and UL listed for Panic Hardware• 1 year limited warranty

Handed • Field reversible • Field sizable • Easy installation• 2 3/4” (70mm) backset • Retrofit 161 door prep • Available with

38” (965mm) or 48” (1219mm) width crossbar • Optional exterior trim

available • Made from heavy gauge steel • Stainless steel latch bolts• Stainless steel springs • Finish: metallic aluminum • Dogging by hex

key • Conforms to ANSI A156.3 Grade 2 • cUL and UL listed for

Panic Hardware • 1 year limited warranty

CROSSBAR EXIT DEVICES • AVAILABLE WITH A VARIETY OF EXTERIOR TRIM OPTIONS • IDEAL FOR MODERATE USE APPLICATIONS

EXIT

DEV

ICES

MODELNUMBER

FUNCTION DESCRIPTION FINISHCASE

QTY LBS / KG

NH900 -1 #1 Exit door only; no exterior trim

C28

12 72.8 / 33.0

NH900 -3 #3 Entrance by thumb piece, latch always free

6

46.4 / 21.0

NH900 -4 #4 Latch activated by key only from outside, door always locked 45.4 / 20.6

NH900 -5 #5 Latch activated by thumb piece,except when locked by outside key 47.2 / 21.4

MODELNUMBER


QTY LBS / KG

1185Concealed vertical rod exit device with 36” (914mm) crossbar,

non-handed; complete set

C20D, C28 6

44.8 / 20.4

1195Rim type exit device with 36” (914mm) crossbar,

handed (LHR or RHR); complete set28.6 / 13.0

* Includes separately packaged crossbars

Dorex 8500 series exterior trims are available in a wide variety of

styles and functions. These trims are ideal for moderate use wood

or hollow metal door applications. Dorex brand products are

recognized for value while delivering lasting performance.

T R I M S F O R 8 5 0 0 S E R I E S E X I T D E V I C E

EXIT DEVICETRIMS

8503 8504 8505 8500NL

8500NLS

8500DT

8500B

8500FH

8500FC

16

MODELNUMBER

FUNCTION DESCRIPTION FINISHCASE

QTY LBS / KG

8500 DT Function #2 Pull handle, painted steel

C28 40

42.8 / 19.5

8500 NL

Function #4

Cylinder trim pull handle, painted steel 42.0 / 19.1

8500 NLS Cylinder trim finger pull, stainless steel C32D 50 6.7 / 3.1

8503 Function #3Thumbgrip trim set, entrance bythumbpiece, reversable handing

C28, C3, C15 10

28.0 / 12.7

8504 Function #4Grip trim set, entrance by key(SC keyway)

29.2 / 13.2

8505 Function #5Thumbgrip trim set, entrance bythumbpiece except when locked by key(SC keyway), reversable handing

33.0 / 15.0

8510 B Passage

Knob assembly(compliments TL series knobsets)

N/A

C32D

20

29.6 / 13.48570 B Classroom

Solid brass 6-pin cylinder(drilled 6, pinned 5) SC keyway

8580 B Storeroom

8510 FC Passage

Lever assembly, curved return(compliments FC series leversets)

N/A C26D, C3

34.4 / 15.68570 FC Classroom


C26D

8580 FC Storeroom

8510 FH Passage

Lever assembly, straight return(compliments FH series leversets)

N/A

35.6 / 16.18570 FH Classroom


8580 FH Storeroom

SPEC

IFIC

ATIO

NS

17

CYLINDRICAL AND TUBULAR LOCKSET FUNCTION GUIDE

EXIT DEVICE FUNCTION GUIDE

79 DOREX | N/A ANSI

UTILITY OR CLOSET

Deadlocking latch bolt activatedby inside knob or key in outsideknob. Inside push-button preventsuse except by emergency key and projects visual occupancy indicator outside. Push-buttonreleased by closing door or turninginside knob. Outside knob alwaysfixed.

94 DOREX | F93 ANSI

HOTEL / MOTEL

Deadlocking latch bolt activatedby key in either side. Both knobsalways fixed.

82 DOREX | F87 ANSI

INSTITUTION OR UTILITY

Deadlocking latch bolt activatedby inside knob or key in outsideknob. Outside knob always fixed.

80 DOREX | F86 ANSI

STOREROOM

Deadlocking latch bolt activatedby knob from either side, exceptwhen outside knob is locked bykey. Outside knob locked orunlocked by key.

Deadlocking latch bolt locked orunlocked by key from outside.Blank plate inside.

Exit door only;no exterior trim

Entrance by trim when latch dogged

Entrance by thumbpiece,latch always free

Latch activated by key only from outside,

door always locked

Latch activated by thumbpiece, except when

locked by outside key

70 DOREX | F84 ANSI

CLASSROOM

Deadlocking latch bolt activatedby knob from either side, exceptwhen key used on either sidelocks or unlocks both sides.

60 DOREX | F91 ANSI

STORE

Similar to function 52, exceptbutton in inside knob can bepushed and turned to lock outsideknob, for entry by key only.Outside knob remains lockeduntil turn button manually reset.

53 DOREX | F109 ANSI

ENTRANCE

Deadlocking latch bolt activatedby knob from either side, exceptwhen inside push-button locksoutside knob. Push-buttonreleased by key or turninginside knob.

52 DOREX | F82 ANSI

ENTRANCE

Latch bolt activated by knobfrom either side, except wheninside push-button locks outsideknob. Push-button released byturning inside knob or closingdoor to prevent lock-out. Outsideknob has provisions for emergencyunlocking.

42 DOREX | F76 ANSI

PRIVACY

Deadlocking latch bolt activatedby knob from either side, exceptwhen inside push-button locksoutside knob. Push-button released by turning inside knob orclosing door to prevent lock-out.

32 DOREX | F77 ANSI

PATIO

Knob and rose for one side ofdoor to match other locksets.

17 DOREX | N/A ANSI

SINGLE DUMMY TRIM

Latch bolt activated by insideknob. Blank plate outside.

15 DOREX | N/A ANSI

EXIT

Latch bolt activated by knobfrom either side.

10 DOREX | F75 ANSI

PASSAGE OR CLOSET

#1 #2 #3 #4 #5

FUN

CTIO

N G

UID

E

Deadlocking latch bolt activatedby knob from either side,Outside or inside knobs can beindependent ly locked orunlocked.

72 DOREX | F80 ANSI

COMMUNICATING

Deadlocking latch bolt activatedby outside knob or from insidethumbturn, except when pushbutton in outside knob locksinside thumbturn. Thumbturnremains locked until push button is manually reset.

71 DOREX | F79 ANSI

COMMUNICATING

1900 SERIES DOOR CLOSERSClosers for interior and exterior doors shall be Dorex 1900 series. Closer shall be multi-size with spring power adjustment from sizes 2 thru 6. Closershall be surface mounted, full-cycle hydraulic rack and pinion type with cast aluminum alloy body. Closer shall be supplied with a non-handedfull body metal cover. Closer shall project no more than 3” (76mm) from the mounting surface. Closer shall have two non-critical thermostaticvalves to separately control sweep and latch speeds. Hydraulic fluid shall be non-gumming and non-freezing. Closer shall have an independentvalve to control the adjustable-cushioning backcheck. Brackets shall be supplied to permit regular, top jamb or parallel arm installation andstandard arm bracket shall allow 15% power adjustment. Closer shall be supplied with all necessary mounting fasteners. OPTIONAL: All Dorex1900BF series closers shall be multi-size with spring power adjustment from sizes 1 thru 4 and shall have an independent valve to controlthe delayed action.

1700 SERIES DOOR CLOSERSClosers for interior and exterior doors shall be Dorex 1700 series. Closer shall be multi-size with spring power adjustment from sizes 2 thru 5.Closer shall be surface mounted, full-cycle hydraulic rack and pinion type with cast aluminum alloy body. Closer shall be supplied with a non-handedmolded narrow profile cover. Closer shall project no more than 3” (76mm) from the mounting surface. Closer shall have two non-criticalthermostatic valves to separately control sweep and latch speeds. Hydraulic fluid shall be non-gumming and non-freezing. Closer shall havean independent valve to control the adjustable-cushioning backcheck. Brackets shall be supplied to permit regular, top jamb or parallel arminstallation and standard arm bracket shall allow 15% power adjustment. Closer shall be supplied with all necessary mounting fasteners.OPTIONAL: All Dorex 1700BF shall be multi-size with spring power ajustment from 1 thru 4.

700 SERIES DOOR CLOSERSClosers for interior and exterior doors shall be Dorex 700 series rack and pinion type with cast aluminum alloy shell. Closer shall be reversable,surface mounted by 3/4”(19mm) hole spacing and shall project no more than 3” (76mm) from the door surface. Closer shall have twonon-critical thermostatic valves to separately control sweep and latch speeds. Closer shall contain non-gumming and non-freezing hydraulicfluid to allow constant closing speeds under extreme temperatures. Brackets shall be supplied to permit regular, top jamb or parallel arm installationand standard arm bracket shall allow 15% power adjustment. Closer shall be supplied with all necessary mounting fastners. OPTIONAL: AllDorex 780 closers shall have an independent adjustable valve to control backcheck cushioning to avoid uncontrolled door opening.

GX1B KNOBSETSAll bored locks shall be Dorex GX1B series. Locks shall meet the requirements of ANSI A156.2, Grade 1. Locks shall be adjustable for 1 3/8” (35mm) to 2” (51mm) door thickness. Locks shall fit standard 2 1/8” (54mm) cross bore (160 or 161 door prep). Latch bolt shall havestandard backset 2 3/4” (70mm); optional 2 3/8” (60mm) with 1/2” (13mm) latch throw and UL listing for use on fire doors. Locks shall bereversible and supplied with all necessary mounting fasteners.

TL SERIES KNOBSETSAll bored locks shall be Dorex TL series. Locks shall meet the requirements of ANSI A156.2 series 4000, Grade 2. Locks shall be adjustablefor 1 3/8” (35mm) to 1 3/4” (44mm) door thickness. Locks shall fit standard 2 1/8” (54mm) cross bore (160 or 161 door prep). Latch bolt shallhave standard backset 2 3/4” (70mm); optional 2 3/8” (60mm), 3 3/4” (95mm) and 5” (127mm) with 1/2” (13mm) latch throw and UL listing for use on fire doors. Locks shall be reversible and supplied with all necessary mounting fasteners.

GX1L SERIES LEVERSETSAll bored lever locks shall be Dorex GX1L series. Locks shall meet the requirements of ANSI A156.2, Grade 1. Locks shall be adjustable for1 3/8” (35mm) to 2” (51mm) door thickness. Locks shall fit standard 2 1/8” (54mm) cross bore (160 or 161 door prep). Latch bolt shall have standard backset 2 3/4” (70mm); optional 2 3/8” (60mm) with 1/2” (13mm) latch throw and UL listing for use on fire doors. Locks shall bereversible and supplied with all necessary mounting fasteners.

FH SERIES LEVERSETSAll bored lever locks shall be Dorex FH series. Locks shall meet the requirements of ANSI A156.2 series 4000, Grade 2. Locks shall be adjustablefor 1 3/8” (35mm) to 1 3/4” (44mm) door thickness. Locks shall fit standard 2 1/8” (54mm) cross bore (160 or 161 door prep). Latch bolt shallhave standard backset 2 3/4” (70mm); optional 2 3/8” (60mm) with 1/2” (13mm) latch throw and UL listing for use on fire doors. Locks shallbe reversible and supplied with all necessary mounting fasteners. OPTIONAL: Lockset trim shall be thru-bolted.

FC SERIES LEVERSETSAll bored lever locks shall be Dorex FC series. Locks shall meet the requirements of ANSI A156.2 series 4000, Grade 2. Locks shall be adjustablefor 1 3/8” (35mm) to 1 3/4” (44mm) door thickness. Locks shall fit standard 2 1/8” (54mm) cross bore (160 or 161 door prep). Latch boltshall have standard backset 2 3/4” (70mm); optional 2 3/8” (60mm) with 1/2” (13mm) latch throw and UL listing for use on fire doors. Locksshall be reversible and supplied with all necessary mounting fasteners. OPTIONAL: Lockset trim shall be thru-bolted.

18

SPEC

IFIC

ATIO

NS

19

SPEC

IFIC

ATIO

NSEM SERIES LEVERSETS

All bored lever locks shall be Dorex EM series. Locks shall meet the requirements of ANSI A156.2 series 4000, Grade 2. Locks shall beadjustable for 1 3/8” (35mm) to 1 3/4” (44mm) door thickness. Locks shall fit standard 2 1/8” (54mm) cross bore (160 or 161 door prep).Latch bolt shall have standard backset 2 3/4” (70mm); optional 2 3/8” (60mm), 3 3/4” (95mm), 5” (127mm) with 1/2” (13mm) latch throw andUL listing for use on fire doors. Locks shall be reversible and supplied with all necessary mounting fasteners.

EL SERIES LEVERSETSAll bored lever locks shall be Dorex EL series. Locks shall meet the requirements of ANSI A156.2 series 4000, Grade 2. Locks shall beadjustable for 1 3/8” (35mm) to 1 3/4” (44mm) door thickness. Locks shall fit standard 2 1/8” (54mm) cross bore (160 or 161 door prep).Latch bolt shall have standard backset 2 3/4” (70mm); optional 2 3/8” (60mm), 3 3/4” (95mm), 5” (127mm) with 1/2” (13mm) latch throw andUL listing for use on fire doors. Locks shall be reversible and supplied with all necessary mounting fasteners.

GX1A SERIES DEADLOCKSAll bored deadlocks shall be Dorex GX1A series. Locks shall meet the requirements of ANSI A156.5, Grade 1. Locks shall be adjustable for 1 3/8” (35mm) to 2 1/4” (57mm) door thickness. Locks shall fit standard 2 1/8” (54mm) cross bore (160 or 161 door prep). Deadbolt shallhave standard backset 2 3/4” (70mm); optional 2 3/8” (60mm), 5” (127mm) with 1” (25mm) bolt throw and UL listing for use on fire doors.Locks shall be reversible and supplied with all necessary mounting fasteners.

FHA SERIES DEADLOCKSAll bored deadlocks shall be Dorex FHA series. Locks shall meet the requirements of ANSI A156.5, Grade 2. Locks shall be adjustable for 1 3/8” (35mm) to 1 3/4” (44mm) door thickness. Locks shall fit standard 2 1/8” (54mm) cross bore (160 or 161 door prep). Deadbolt shall havestandard backset 2 3/4” (70mm); optional 2 3/8” (60mm) with 1” (25mm) bolt throw and UL listing for use on fire doors. Locks shall bereversible and supplied with all necessary mounting fasteners.

TLA SERIES DEADLOCKSAll bored deadlocks shall be Dorex TLA series. Locks shall meet the requirements of ANSI A156.5, Grade 2. Locks shall be adjustable for 1 3/8” (35mm) to 1 3/4” (44mm); optional 2 1/4” (57mm) door thickness. Locks shall fit standard 2 1/8” (54mm) cross bore (160 or 161 door prep). Deadbolt shall have standard backset 2 3/4” (70mm); optional 2 3/8” (60mm), 5” (127mm) with 1” (25mm) bolt throwand UL listing for use on fire doors. Locks shall be reversible and supplied with all necessary mounting fasteners.

142 SERIES HINGESAll full mortise plain bearing template butt hinges shall be Dorex Pro 142 series. Hinges shall be made from select quality steel base materials andhigh grade plated finishes. Hinges shall be of standard weight, have 5 knuckles with non-rising removable pins and standard flat top andknock-out bottom tips. Hinges shall have four square corners. Hinges shall be reversible and supplied with all necessary wood and undercutmachine mounting fasteners. OPTIONAL: Hinges shall have non-removable pin (NRP) security.

179 SERIES HINGESAll full mortise ball bearing template butt hinges shall be Dorex Pro 179 series. Hinges shall be made from select quality steel base materials andhigh grade plated finishes. Hinges shall be of standard weight, have 5 knuckles, 2 Slimline ball bearings with non-rising removable pins andstandard flat top and knock-out bottom tips. Hinges shall have four square corners. Hinges shall be reversible and supplied with all necessarywood and undercut machine mounting fasteners. OPTIONAL: Hinges shall be made of 18-8 stainless steel base materials and have non-removable pin (NRP) security, 1/4” (6.4mm) or 5/32” (4.0mm) radius corners and have non-removable pin (NRP) security, choice of ball orsteeple removable tips. Concealed bearing hinges: All full mortise concealed bearing template butt hinges shall be Dorex Pro CB179 series,hinges shall have 3 knuckles, 2 concealed Slimline ball bearings and flush top and bottom tips. All other specifications same as 179 series.

1168 SERIES HINGESAll full mortise heavy-duty ball bearing template butt hinges shall be Dorex Pro 1168 series. Hinges shall be made from select quality steelbase materials and high grade plated finishes. Hinges shall be of heavy weight, have 5 knuckles, 4 Slimline ball bearings withnon-rising non-removable pin (NRP) security and standard flat top and knock-out bottom tips. Hinges shall have four square corners. Hingesshall be reversible and supplied with all necessary wood and undercut machine mounting fasteners. OPTIONAL: Hinges shall be made of 18-8stainless steel base materials, 5/32” (4.0mm) radius corners.

3310 SERIES HINGESAll full mortise single acting template spring hinges shall be Dorex Pro 3310 series. Hinges shall be made from select quality steel base materials and high grade plated finishes. Hinges shall be of standard weight, have 3 knuckles with silent action nylon bearings. Hinges shallhave four square corners. Hinges shall be reversible and supplied with spring tensioner and all necessary wood and undercut machine (if applicable) mounting fasteners. OPTIONAL: Hinges shall have 1/4” (6.4mm) or 5/8” (15.9mm) radius corners.

20

SPEC

IFIC

ATIO

NS 1265 SERIES HINGES

All full surface ball bearing reinforcement pivot hinges shall be Dorex Pro 1265 series. Hinges shall be made from select quality steel basematerials and high grade plated finish. Hinges shall be of standard weight, have 2 knuckles, 1 Slimline ball bearing and standard flat top andbottom tips. Hinges shall have six square corners. Hinges shall be handed and supplied with all necessary mounting hardware.

148 SERIES HINGESAll full mortise swing clear ball bearing template hinges shall be Dorex Pro 148 series. Hinges shall be made from select quality steel basematerials and high grade plated finish. Hinges shall be of standard weight, have 5 knuckles, 2 Slimline ball bearings with non-rising removablepins and standard flat top and screw-out bottom tips. Hinges shall have four square corners. Hinges shall be handed and supplied with allnecessary wood and undercut machine mounting fasteners.

B73 SERIES HINGESAll half surface ball bearing template hinges shall be Dorex Pro B73 series. Hinges shall be made from select quality steel base materials. Hingesshall be of standard weight, have 5 knuckles, 2 Slimline ball bearings with non-rising non-removable pin (NRP) security and standard flat topand knock-out bottom tips. Hinges shall have four square corners. Hinges shall be handed, supplied with all necessary thru bolts, gommetsand undercut machine mounting fasteners.

B77 SERIES HINGESAll half mortise ball bearing template hinges shall be Dorex Pro B77 series. Hinges shall be made from select quality steel base materials. Hingesshall be of standard weight, have 5 knuckles, 2 Slimline ball bearings with non-rising non-removable pin (NRP) security and standard flat topand knock-out bottom tips. Hinges shall have four square corners. Hinges shall be handed, supplied with all necessary wood and undercutmachine mounting fasteners.

8500 SERIES EXIT DEVICESExit devices for interior and exterior doors shall be Dorex 8500 series made from heavy gauge steel and shall meet the requirements of ANSI A156.3 Grade 2. The touch pad exit device shall have a 2 3/4” (70mm) backset (retrofit 161 door prep) and permit easy installation oneither wood or hollow metal doors with moderate traffic. The exit device shall be non-handed, field sizable, and shall project no more than2 9/16” (65mm) from the door surface. On non-fire labeled doors, dogging of the exit device shall be permitted with the use of a hex key.The exit device shall be supplied with stainless steel latch bolts, stainless steel springs and all the necessary mounting fasteners.OPTIONAL: All Dorex 8500 series exit devices shall have a wide variety of exterior trims. The Dorex 8500V exit device shall have surfacemounted vertical rods.

NH900 SERIES EXIT DEVICESExit devices for interior and exterior doors shall be Dorex NH900 series and shall meet the requirements of ANSI A156.3 Grade 2. The rimtype crossbar exit device shall have a 2 3/4” (70mm) backset (retrofit 161 door prep) and permit easy installation on either wood or hollowmetal doors with moderate traffic. The exit device shall be field reversible, field sizable, and shall project no more than 4 3/4” (121mm) fromthe door surface. Dogging of the exit device shall be permitted with the use of a hex key. The exit device shall be supplied with all the necessary mounting fasteners. OPTIONAL: All Dorex NH900 series exit devices shall have a wide variety of exterior trims. The Dorex NH900series exit device shall be capable to accommodate a maximum 48” (1219mm) crossbar.

1100 SERIES EXIT DEVICESExit devices for narrow to wide stile aluminum doors with moderate traffic shall be Dorex 1100 series made from high tensile strength aluminumalloy material. The rim type panic bar exit device shall be handed, field sizable, and shall project no more than 4 5/8” (117mm) from the doorsurface. Dogging of the exit device shall be permitted with the use of a slotted key or outside cylinder. The exit device shall be supplied withall the necessary mounting fasteners. OPTIONAL: The Dorex 1185 exit device shall have a non-handed concealed vertical rod. The Dorex 1100series exit device shall be capable to accommodate a maximum 48” (1219mm) contoured aluminum extruded crossbar.

COVER 1700

700 SERIES DOOR CLOSERS


COVER 1900


21

SIZE

CH

ART

S

MODEL A B C D E F COVER

1900 11 1/8”(283mm)

11 7/8”(302mm)

1 1/8”(29mm)

2”(51mm)

3 3/8”(86mm)

2 3/8”(60mm)

12 1/8” x 3”(308mm x 76mm)

MODEL A B C D E F COVER

1700 9 1/16”(230mm)

9 3/4”(248mm)

3/4”(19mm)

1 3/4”(44mm)

3 1/4”(83mm)

2 7/8”(73mm)

10 9/16” x 2 1/16”(268mm x 52mm)

MODEL A B C D E F

751 6 1/2”(165mm)

7 1/8”(181mm)

3/4”(19mm)

1 11/16”(43mm)

2 7/8”(73mm)

2 9/16”(65mm)

752 / 753 8 3/16”(208mm)

8 7/8”(225mm) 1 3/4”

(44mm)3 1/4”(83mm)

2 7/8”(73mm)

754 / 755 9 1/16”(230mm)

9 3/4”(248mm)

GX1B SERIES KNOBSETS

TL SERIES KNOBSETS

FH SERIES LEVERSETSGX1L SERIES LEVERSETS

22

SIZE

CH

ART

S

MODEL A B C

GX1B 3”(76mm)

2 1/4”(57mm)

3”(76mm)

MODEL A B C

TL 3”(76mm)

2 1/8”(54mm)

2 5/8”(67mm)

MODEL A B C D

GX1L 3 1/2”(89mm)

5”(127mm)

2 11/16”(68mm)

5/16”(8mm)

MODEL A B C D

FH 3 1/2”(89mm)

4 1/2”(114mm)

1 7/8”(48mm)

1/2”(13mm)

EM SERIES LEVERSETS

TLA SERIES DEADLOCKS FHA SERIES DEADLOCKS

FC SERIES LEVERSETS

GX1A SERIES DEADLOCKSEL SERIES LEVERSETS

23

SIZE

CH

ART

S

MODEL A B C D

FC 3 1/2”(89mm)

4 1/2”(114mm)

1 7/8”(48mm)

1/2”(13mm)

MODEL A B C D

EM 3”(76mm)

4”(102mm)

1 7/8”(48mm)

7/16”(11mm)

MODEL A B C D

EL 3”(76mm)

4”(102mm)

1 7/8”(48mm)

7/16”(11mm)

MODEL A B C

GX1A 2 1/2”(64mm)

1 9/16”(40mm)

1 1/16”(27mm)

MODEL A B C

FHA 2 9/16”(65mm)

1 11/16”(43mm)

1”(25mm)

MODEL A B C

TLA 2 9/16”(65mm)

1 5/8”(41mm)

1 1/8”(29mm)

142 SERIES HINGES

142 44 / 142 454

142 3535

179 SERIES HINGES

179 44 / 454 / 4545 / 55 CB179

179 3535

Inch measurement for reference only, rounded off to nearest 1/32”


24

SIZE

CH

ART

S

MODEL A B C D E F G H I J

142 3535 3 1/2”(88.9mm)

3 1/2”(88.9mm)

1/2”(13.0mm)

11/32”(9.0mm)

1 13/32”(35.4mm)

N/A 11/16”(17.5mm)

3/8”(9.1mm)

1/8”(3.1mm)

1/16”(1.6mm)

142 44 4”(101.6mm) 4”

(101.6mm)

9/16”(14.0mm)

1/2”(13.0mm)

1”(25.5mm)

31/32”(24.6mm)

3/4”(19.1mm) 3/8”

(9.5mm)1/8”

(3.4mm)142 454 4 1/2”

(114.3mm)19/32”

(15.2mm)1/2”

(12.9mm)1 1/8”

(28.6mm)1 7/32”(31.3mm)

1”(25.4mm)


179 3535 3 1/2”(88.9mm)

3 1/2”(88.9mm)

1/2”(13.0mm)

11/32”(9.0mm)

1 13/32”(35.4mm)

N/A 11/16”(17.5mm)

11/32”(9.1mm)

1/8”(3.1mm)

1/16”(1.6mm)

179 44 4”(101.6mm) 4”

(101.6mm)

9/16”(14.0mm)

1/2”(13.0mm)

1”(25.5mm)

31/32”(24.6mm)

3/4”(19.1mm)

3/8”(9.5mm)

1/8”(3.4mm)

179 4544 1/2”

(114.3mm)19/32”

(15.2mm)

1/2”(12.9mm) 1 1/8”

(28.6mm)1 7/32”(31.3mm) 1”

(25.4mm)179 4545 4 1/2”

(114.3mm)1/2”

(13.0mm)

179 55 5”(127.0mm)

5”(127.0mm)

5/8”(15.9mm)

1/2”(12.9mm)

1 1/4”(31.8mm)

1 15/32”(37.7mm)

5/32”(3.7mm)

3310 44 / 454

3310 3535

3310 SERIES HINGES

1265 SERIES HINGES LH illustrated

1168 SERIES HINGES




25

SIZE

CH

ART

S


1168 454 4 1/2”(114.3mm)

4”(101.6mm)

23/32”(18.0mm)

1/2”(13.0mm)

1 1/8”(28.6mm)

1 7/32”(31.3mm)

1”(25.4mm)

3/8”(9.5mm)

3/16”(4.8mm)

1/16”(1.8mm)


3310 3535 3 1/2”(88.9mm)

3 1/2”(88.9mm) 23/32”

(18.5mm)

11/32”(9.0mm)

1 13/32”(35.4mm)

N/A 11/16”(17.5mm)

11/32”(9.1mm)

1/8”(3.1mm)

1/16”(1.6mm)

3310 44 4”(101.6mm) 4”

(101.6mm)

1/2”(13.0mm)

1”(25.5mm)

31/32”(24.6mm)

3/4”(19.1mm) 3/8”

(9.5mm)1/8”

(3.4mm)3310 454 4 1/2”

(114.3mm)25/32”

(19.6mm)1/2”

(12.9mm)1 1/8”

(28.6mm)1 7/32”(31.3mm)

1”(25.4mm)

MODEL A B C D E F G H I J K L J

1265 3 1/4”(82.5mm)

1 1/2”(38.1mm)

11/16”(17.5mm)

4 9/32”(109.1mm)

1 5/32”(29.1mm)

1/2”(12.7mm)

1 1/8”(28.6mm)

2 3/8”(60.3mm)

3”(76.2mm)

1/2”(12.7mm)

1”(25.4mm)

5/8”(16.0mm)

3/16”(4.8mm)

148 SERIES HINGES LH illustrated

B73 SERIES HINGES LH illustrated

B77 SERIES HINGES LH illustrated




26

SIZE

CH

ART

S


148 454 4 1/2”(114.3mm)

1 23/32”(43.3mm)

19/32”(15.2mm)

1/2”(12.9mm)

1 1/8”(28.6mm)

1 7/32”(31.3mm)

3/8”(9.5mm)

1”(25.4mm)

1/8”(3.4mm)

1/16”(1.8mm)

MODEL A B C D E F G H I J K L M N

B73 4 1/2”(114.3mm)

2 11/32”(59.7mm)

1 13/16”(46.1mm)

9/16”(14.2mm)

1/2”(12.7mm)

1 3/4”(44.6mm)

15/32”(12.0mm)

1 1/32”(26.5mm)

1/2”(12.7mm)

1 1/8”(28.6mm)

1 7/32”(31.3mm)

3/8”(9.5mm)

1”(25.4mm)

1/8”(3.4mm)

MODEL A B C D E F G H I J K L M N

B77 4 1/2”(114.3mm)

1 7/32”(31.0mm)

1 13/16”(45.7mm)

9/16”(14.2mm)

1/2”(12.7mm)

1 3/4”(44.5mm)

1/2”(12.7mm)

N/A 1/2”(12.9mm)

1 1/8”(28.6mm)

1 7/32”(31.3mm)

3/8”(9.5mm)

1”(25.4mm)

1/8”(3.4mm)

HINGE ACCESSORIES

9510 / 9511 / 9512

9515


27

SIZE

CH

ART

S

ROD DIAMETER 3/8” (10mm)

Shown: chassis and body for 8500 & 8500V models

8500V model assembly

8500 SERIES EXIT DEVICES

MODEL A B C D E F G H I J K

9510

1 3/16”(30.0mm)

7 15/16”(202.0mm)

3 13/32”(86.5mm)

2 9/32”(57.9mm)

1 9/32”(32.3mm)

1/2”(13.0mm)

9/32”(6.9mm)

29/32”(22.9mm)

15/16”(23.7mm)

3/32”(2.5mm)

5/32”(4.0mm)

9511 1/16”(1.2mm)

9512N/A

9515 4 1/2”(114.3mm)

1 1/2”(38.1mm)

1 1/8”(28.6mm)

3/8”(9.5mm)

1/2”(12.9mm)

1 7/32”(31.3mm)

1/8”(3.4mm)

1”(25.4mm)

N/A N/A

MODEL A B C D E F G H I

85002 9/16”(65mm)

7 11/16”(195mm)

2 1/16”(52mm)

18 1/16”(459mm)

33 1/4”(845mm)

1 15/16”(49mm)

N/A N/A N/A

8500V 1 31/32”(50mm)

5 7/8”(149mm)

1 3/8”(35mm)

1100 SERIES EXIT DEVICES LHR illustrated

28

SIZE

CH

ART

S

7 1/2”(191mm)D-pull

NH900 SERIES EXIT DEVICES LHR illustrated

MODEL A B C D E F G H I J K

NH900 4 3/4”(121mm)

2 3/32”(53mm)

8 1/2”(216mm)

2 21/32”(67mm)

38”(965mm)

2 5/32”(55mm)

4 5/8”(117mm)

2”(51mm)

16 1/16”(408mm)

3 1/2”(89mm)

2 1/16”(52mm)

MODEL A B C D E F

1185 / 1195 4 5/8”(117mm)

2”(51mm)

7 3/8”(187mm)

1 1/4”(32mm)

36”(915mm)

1 1/2”(38mm)

8500DT 8500NLS*850585048503 8500B 8500FC 8500FH 8500NL*

EXIT DEVICE TRIMS * Cylinder not included

29

SIZE

CH

ART

SFI

NIS

H G

UID

E

MODEL A B C D

8503 / 8504 / 8505 12 1/2”(318mm)

5 7/8”(149mm)

1 7/8”(48mm)

N/A

8500B

3 1/8”(79mm)

2 1/8”(54mm)

2 5/8”(67mm)

1 1/4”(32mm)

8500FC4 1/2”

(114mm)1 7/8”(48mm)

1/2”(13mm)

8500FH

8500DT6 3/8”

(162mm)

N/A1 1/8”(29mm)

N/A8500NL 3 3/16”(80mm)

8500NLS 3”(76mm)

2 1/8”(54mm)

7/8”(22mm)

CANADIANEQUIVALENT

DOREXU.S.

EQUIVALENTB.H.M.A. DESCRIPTION BASE METAL

- BLR - 383 DARK BRONZE ENAMEL STEEL

- CP - 600 PRIMED COATED STEEL

C1D KJ US1D 693 MAT BLACK STEEL

C2G ZP US2G 603 ZINC PLATED STEEL

C3 BP US3 605, 632 BRIGHT BRASS BRASS, STEEL

C3M - US3M - MIRROR POLISHED BRASS STEEL

C4 SDB US4 633 SATIN BRASS STEEL

C5 AB US5 609, 638 ANTIQUE BRASS BRASS, STEEL

C15 SDN US15 619, 646 SATIN NICKEL BRASS, BRONZE, STEEL

C15A - US15A 620, 647 ANTIQUE NICKEL BRASS, BRONZE, STEEL

C20D DU / STBR US20D 393 DARK BRONZE / DURONODIC / STATUARY BRONZE ALUMINUM, STEEL

C26 CHR US26 625, 651 BRIGHT CHROME BRASS, BRONZE, STEEL

C26D CHR US26D 626, 652 SATIN CHROME BRASS, BRONZE, STEEL

C28 AL US28 628, 689 ALUMINUM ANY

C32D SS US32D 630 SATIN STAINLESS STEEL STAINLESS STEEL

- EXW - - EPOXY WHITE ANY

V3 ENDURANCE - - POLISHED BRASS, LIFETIME FINISH BRASS, STEEL

Copyright © 2008 by DOREX® All rights reserved.P3 - 10/07 R4 03/08

30

NO

TES

CONTACT INFO WWW.DOREX.COM

Copyright © 2008 by DOREX® All rights reserved.

Date post:	08-Apr-2018
Category:	Documents
Upload:	hoanghanh
View:	224 times
Download:	3 times

PRODUCT SELECTION GUIDE - Supreme Lock€¦ · · 2011-04-18Non-handed • Adjustable power range...

Documents