MagnaClean DRX Product SpecificationInnovative and compact magnetic filtration for essential protection
MagnaClean DRX is the latest addition to ADEY’s range of water treatment solutions for commercial plant rooms. It is designed to protect and maintain commercial heating systems, by removing debris and black iron oxide sludge from the system.
MagnaClean DRX introduces a new and compact design for protecting heating systems, based on industry-proven magnetic filtration technologies and components. The filter consists of an innovative magnetic belt, containing high-performing neodymium magnets, wrapped around a precision-engineered stainless-steel canister.
The unique magnetic belt technology makes servicing quick and easy. The belt simply needs to be unclipped to release the magnets so that the sludge can be drained away. Minimal space is required around the filter to complete the service, making the compact design ideal where space is limited.
MagnaClean DRX is available in 2, 2½, 3 and 4 pipe dimensions to meet the demands of different applications. The product comes supplied with EDPM full-flange gaskets for robust sealing at high temperatures.
Benefits
• Helps restore heating system efficiency and performance • On-going maintenance costs are reduced• Effective capture of black iron oxide (sludge)• Collects large and micro particles• Patented design ensures low pressure loss• Simple installation and servicing• Suitable for in-line and side stream installations• Install on vertical and horizontal pipe runs• Compatible with all heating systems• Accessories available: • Automatic Air Vent• Thermal Jacket• Manufactured in the UK
MagnaClean DRX 2" DN50 2½" DN65 3" DN80 4" DN100 (only available in the UK)
Product code FL1-03-03781 FL1-03-03814 FL1-03-03782 FL1-03-03783
Casing
Material 304L Stainless Steel
Volume (PED) Litres (approx) 4.97 5.12 6.36 7.76
Flow configuration Can go in any orientation. Horizontal or vertical, in main flow or side stream configuration
Seals EPDM Flange gaskets
Drain point thread ¾ BSPT
Maximum working pressure 16 Bar
Maximum working temperature 100°C
Air vent Manual (Automatic air vent available to order as a separate accessory)
Magnet Assembly
Casing Glass reinforced Nylon
Magnets - type Neodymium
Magnets - number of 48 48 64 80
Magnets - dimensions 20mm Dia x 10mm Thk
Flow Flange PED
Flange diameter 165mm 185mm 200mm 220mm
Flange thickness 18mm 18mm 15mm 15mm
Flange type PN16
Bolt size M16
Bolt quantity 4 4 8 8
Bolt hole PCD 125mm 145mm 180mm 180mm
Approvals
PED PED 2014/68/EU: TABLE 4 SEP
Weight ( approx ) Kg 12.0 13.2 15.7 18.9
Dimensions See technical drawings
Minimum clearance 155mm
Velocity 3.0m/s
MagnaClean DRX Technical SpecificationAvailable in 2, 2½, 3, and 4 versions ( 4 available in the UK only )
MagnaClean DRX Technical SpecificationDimensions
A
B J
H
H/2
F
C
No. of M
K
L No. of N
D
G
E
MagnaClean DRX A (mm)
B (mm)
C (mm)
D (mm)
E (mm)
F (mm)
G (mm)
H (mm)
H/H2 (mm)
J (mm)
K (mm)
L (mm)
M (mm)
N (mm)
2'' 403 409 18 165 292 87 115 206 103 127 125 18 3 4
2½'' 403 409 18 165 292 87 115 206 103 127 145 18 3 4
3'' 467 473 20 200 292 87 115 206 103 127 160 18 4 8
4'' 528 534 20 220 292 87 115 206 103 127 180 18 5 8
MagnaClean DRX Technical SpecificationPressure Differential
2 Inch PED DRX 2.5 Inch PED DRX
3 Inch PED DRX 4 Inch PED DRX
Volume flow rate (m^3/h) Volume flow rate (m^3/h)
ΔP
[MB
]Δ
P [M
B]
ΔP
[MB
]Δ
P [M
B]
2'' PED
2½'' PED
223
mm
403 mm
206
mm
Ø 202 mm
223
mm
403 mm
206
mm
Ø 202 mm
223m
m
403mm
206
mm
Ø202mm
206
mm